aboutsummaryrefslogtreecommitdiffstats
path: root/editors/xemacs
Commit message (Collapse)AuthorAgeFilesLines
* Optionally enable OpenLDAP through knob WITH_LDAPvs2006-03-171-1/+7
|
* Fix plist.anray2006-02-131-0/+31
| | | | Reported by: krismail
* Fix pkg-plistanray2006-02-021-5/+5
| | | | Reported by: pointyhat(kris)
* Update xemacs and xemacs21-mule to 21.4.19anray2006-01-312-4/+4
|
* Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtryedwin2006-01-221-2/+2
| | | | | Approved by: krion@ PR: ports/88711 (related)
* editors/emacs20 was changed not to conflict with other emacsen.anray2005-12-161-1/+1
| | | | | | PR: ports/90477 Submitted by: NIIMI Satoshi <sa2c@sa2c.net> Approved by: sem(mentor)
* - Update to 21.4.18garga2005-12-073-31/+6
| | | | | PR: ports/90011 Submitted by: Andrey Slusar <anrays@gmail.com>
* Fix XEmacs working under amd64.yoichi2005-11-273-2/+17
| | | | | PR: ports/89559 Submitted by: Andrey Slusar
* - Add SHA256pav2005-11-261-0/+1
|
* - Fix PLIST problem on amd64. Unbreak.sem2005-11-191-2/+1
| | | | | PR: ports/89250 Submitted by: Andrey Slusar
* Mass-conversion to the USE_AUTOTOOLS New World Order. The code presentade2005-11-151-1/+1
| | | | | | | | | | | | | | | | | in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself. Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME team -- all GNOME 2.12.x ports use it. Preliminary documentation can be found at: http://people.FreeBSD.org/~ade/autotools.txt which is in the process of being SGMLized before introduction into the Porters Handbook. Light blue touch-paper. Run.
* - Make packages optional (WITHOUT_XEMACS_PACKAGES).sem2005-06-153-5/+35
| | | | | | | | | - Remove dependency on mail/faces (it is not required for an base editor configuration and it pulls in gtk1 and what comes with that. - Integrate with the GNOME desktop if installed. PR: ports/68826 Submitted by: Pawel Worach <pawel.worach@telia.com>
* Add CONFLICTS variable, since this port conflicts with otherjylefort2005-05-061-0/+4
| | | | emacs/xemacs ports.
* At Kris's request, back out the MACHINE_ARCH spelling correction untilobrien2005-04-121-1/+1
| | | | after 5.4-RELEASE.
* Assist getting more ports working on AMD64 by obeying theobrien2005-04-111-1/+1
| | | | Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
* Reset bouncing maintainer address:linimon2005-04-081-1/+1
| | | | | | ----- The following addresses had permanent fatal errors ----- <pawel.worach@telia.com> (reason: 550 RCPT TO:<pawel.worach@telia.com> User unknown)
* BROKEN on amd64: Incomplete pkg-plistkris2005-03-271-0/+1
| | | | Approved by: portmgr (self)
* - Remove forgotten filesem2005-02-092-12/+1
| | | | - Grant maintainership to submitter of the last PR
* - Update port to 21.4.17 "Jumbo Shrimp".sem2005-02-094-106/+46
| | | | | | | | | | - Sync up Motif selection algorithm with xemacs21-mule port. - Remove GTK support for now, it was commented out and it does not work well. - General Makefile cleanup - Unbreak on sparc64 PR: ports/77291 Submitted by: Pawel Worach <pawel.worach(at)telia.com>
* - Update to 21.4.16sem2004-12-266-29/+19
| | | | | | | - Fix build on -CURRENT PR: ports/75492 Submitted by: Pawel Worach <pawel.worach(at)telia.com>
* It turns out that Andrey Slusar only wants to maintain the xemacs-mulegj2004-12-151-1/+1
| | | | ports, so make the maintainer ports@.
* Use the BZIP2 distribution instead of a whole bunch of tar.gz files [1].gj2004-12-142-8/+4
| | | | | | | Make Andrey Slusar <anray AT inet DOT ua> the maintainer, since he kindly volunterred to take over this port from me. Submitted by: Denis Shaposhnikov <dsh AT vlink DOT ru> [1]
* Update to 2.4.15.gj2004-08-164-134/+28
| | | | | Comment out the GTK support since either bsd.gnome.mk is broken or I'm too stupid to figure it out.
* Add patch-emacs.c to fix the following problem as quoted from the PR:gj2004-07-221-0/+11
| | | | | | | | | | The port patches src/mem-limits.h to declare the "lim_data" variable as rlim_t (a 64-bit type), but src/emacs.c still defines it as an integer. This makes the memory limit checking think that there are zero bytes available. PR: 69347 Submitted by: Andrew Heybey <ath@niksun.com>
* Add patch-regex.c to handle an overflow which is caused by long linesgj2004-04-191-0/+11
| | | | | | | produced by compile and make output in xemacs. PR: ports/62437 Submitted by: Palle Girgensohn <girgen@pingpong.net>
* Unbreak port by moving some definitions from the pre-fetch targetedwin2004-04-131-4/+5
| | | | | | to "above it". Noticed by: nearly everybody.
* Add a check for ${X11BASE}/lib/libXm.so so that a dependency can be addedgj2004-04-131-0/+4
| | | | | | | on open-motif. PR: ports/62401 Submitted by: Vivek Khera <khera@kcilink.com>
* SIZEify (maintainer timeout)trevor2004-03-311-0/+3
|
* Rename misnamed patch (patch:mem-limits.h)kris2004-03-251-0/+0
|
* Port to amd64.kris2004-03-253-2/+20
| | | | Submitted by: James Van Artsdalen <james-freebsd-amd64 at jrv.org>, gallatin, kan
* Update to version 21.4.14.gj2003-10-184-18/+18
| | | | Submitted by: Oliver Banta <obanta@conft.net>
* Xemacs seems to be generally broken on sparc64. Add NOT_FOR_ARCHS=sparc64gj2003-10-131-0/+2
| | | | to the Makefile.
* Make portlint(1) happy by changing strip to ${STRIP_CMD}osa2003-09-241-1/+1
| | | | | Submitted by: Oleg Karachevtsev <ok@etrust.ru> PR: 56998
* After a repo copy from xemacs-devel turn this port into xemacs.gj2003-04-231-3/+3
|
* Remove USE_GNOMENG.marcus2003-04-201-1/+0
|
* Remove pkg-comment and add COMMENT to the Makefile.gj2003-03-062-1/+1
|
* Also update distinfo to reflect the update to 21.4.12.gj2003-01-181-3/+3
|
* Update to version 2.4.12.gj2003-01-172-2/+5
| | | | | Note that this port is now mis-named - 21.4 is the stable branch and 21.5 is the development branch. 21.1 (in xemacs21) is now "historical".
* xemacs21 and xemacs-devel: add a LIB_DEPENDS on compface.1 so thatgj2002-10-291-2/+3
| | | | | | | | | | | the mail/faces port cannot be accidentally deleted if xemacs uses it. xemacs-devel: Add nonas,noeds to the --with-sound line because xemacs-devel barfs when trying to use our sounds/nas port. Noticed while testing the fix for the PR. PR: 44588 Submitted by: Volker Stolz <vs@foldr.org>
* Deploy USE_GNOMENG infrastructurelioux2002-08-301-1/+2
| | | | | PR: 42197 Submitted by: Edwin Groothuis <edwin@mavetju.org>
* Add patch-al to work around an apparent bug in gcc31 in -current. Thegj2002-06-301-0/+11
| | | | | | | problem was not observed with the gcc in -stable. The apparent bug results in an endless loop if a certain routine in lstream.c is inline'd.
* Update to 21.4.8.gj2002-06-303-4/+6
|
* Add WITHOUT_X11 to allow making these ports without X11 support.gj2002-01-291-5/+19
| | | | | | Add WITH_XAW3D for those who like a 3D look. Otherwise no changes were made to the contents of the ports.
* Update to version 21.4.6.gj2002-01-103-5/+6
| | | | Submitted by: Jerry A! <jerry@thehutt.org>
* First round of auto* cleanups:will2002-01-061-1/+1
| | | | | | | | | | | | | - USE_AUTO* -> USE_AUTO*_VER=* where required - USE_AUTO* / *_DEPENDS=.*auto*:*/devel/auto* -> GNU_CONFIGURE where OK - Other minor changes to fix things These changes should be no-ops with the current bsd.port.mk, but will assist in preparing for the next generation of USE_AUTO*. Submitted by: bento 4-exp USE_AUTO* cleanups http://people.FreeBSD.org/~will/4-exp/ http://bento.FreeBSD.org/errorlogs/4-exp-latest/
* Since obrien deleted patch-aj from xemacs21, I guess it isn't neededgj2001-12-091-18/+0
| | | | here either.
* Style police: WWW tags should either end in a file/script or TRAILING /; Fix ↵lioux2001-11-211-1/+1
| | | | the later case
* Add ``--with-ldap=no'' to the CONFIGURE_ARGS to avoid missing a dependencygj2001-10-311-0/+1
| | | | | | | | in case the user has LDAP installed. This is one of those things which are automatically detected at configure time. PR: 31622 Submitted by: Alec Wolman <wolman@cs.washington.edu>
* Update to 21.4.5. The problem with a Lisp error occuring when the usergj2001-10-302-5/+5
| | | | | | | | does a font change in the Options menu seems to be fixed, although no change actually seems to result. The GTK binding does not seem to be any better, but it's also not any worse.
* Use ${WRKDIR} instead of /tmp for the temporary output from sed becausegj2001-10-281-2/+2
| | | | | | it's just generally a better idea. Why didn't I think of that ? Submitted by: nectar
* Put tmp_zot (output from sed) into /tmp in case /usr/ports is mountedgj2001-10-271-2/+2
| | | | | | | read only. PR: ports/31513 Submitted by: Marc Unangst (mju@unangst.org)
* Initial checkin of xemacs-devel after xemacs21 was repo copied.gj2001-10-267-123/+503
| | | | | | | | | | | | | | | | | | | | Several people have requested this, so here it is. This port is intended to track the GAMMA version of the XEmacs editor. This is version is based on xemacs-21.4.4, which has a GTK binding. Note that the GTK support is buggy (at least on my system), although I haven't noticed any fatal problems, just annoying ones. There are other bugs in this version, e.g. any attempts to make font changes in the Options menu result in a Lisp error. Please do not file any PRs on XEmacs errors, the maintaine will terminate them with extreme prejudice. I haven't tested this at all on Alpha because beast won't let me in.
* Add a pre-configure target to patch some man pages such that theygj2001-10-081-0/+7
| | | | | | | reference the correct, gzipped source man pages. PR: ports/29523 Submitted by: swear@aa.net (Gary W. Swearingen)
* Bump png majorache2001-09-111-1/+1
|
* Update to version 21.1.4.gj2001-02-033-4/+11
| | | | Submitted by: kiri
* Version up to 21.1.13. Corresponding with this change,bsd.emacs.mk'skiri2001-01-193-9/+4
| | | | xemacs21 version will be changed by shige :)
* Remove missing file (lib/xemacs-21.1.12/lisp/package-get.el.orig).asami2000-11-021-1/+0
| | | | Submitted by: bento
* Use MASTER_SITE_XEMACS.knu2000-10-241-7/+3
| | | | | | | | | Reorder variables to satisfy portlint. Approved by: Jing-Tang Keith Jang <keith@freebsd.sinica.edu.tw> (MAINTAINER of chinese/xemacs) KIRIYAMA Kazuhiko <kiri@pis.toba-cmt.ac.jp> (MAINTAINER of xemacs-*-packages)
* Enable XIM support by default.knu2000-10-243-15/+60
| | | | | | | | Reflect Wnn4 -> FreeWnn change. Fix build problems. PR: ports/21549 Submitted by: KIRIYAMA Kazuhiko <kiri@pis.toba-cmt.ac.jp>
* Specify --with-database=berkdb in the CONFIGURE_ARGS to avoidgj2000-09-241-0/+1
| | | | | | | | | | | confusion when databases/gdbm is installed. This change assures that the Berkeley db in libc is used. Since this is such a trivial change I also just went ahead and did it for xemacs21-mule also. PR: 21172 Submitted by: OGAWA Takaya
* Update to version 21.1.12. The new release only made changes togj2000-08-104-12/+11
| | | | | | | | | | configuration files and Emacs.ad and deleted xemacs-faq.info-6. Use LOCALBASE instead of PREFIX in CONFIGURE_ARGS - that makes it easier to test new versions of the port. PR: 20480 Submitted by: KIRIYAMA Kazuhiko <kiri@pis.toba-cmt.ac.jp>
* (1) Add new variable, XFREE86_VERSION, to specify which version ofasami2000-08-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XFree86 (3 or 4) to depend to when USE_XLIB is set. XFREE86_VERSION defaults to 3 for now, but adventurous users can override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB will add a dependency to x11/XFree86; when it is set to 4, the dependency will be to x11/XFree86-4-libraries. When XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS hacks to avoid messing with XFree86 are turned off. Since XFree86 version 4 includes some software that used to be separate ports, when XFREE86_VERSION=3 the following variables are provided: USE_DGS LIB_DEPENDS on x11/dgs USE_FREETYPE LIB_DEPENDS on print/freetype USE_MESA LIB_DEPENDS on graphics/Mesa3 USE_XPM LIB_DEPENDS on graphics/xpm When XFREE86_VERSION=4, these variables have no effect. The LIB_DEPENDS in the tree for the above four ports have all been converted to the USE_* counterparts. For your information, this is the count of the number of ports: USE_DGS 0 USE_FREETYPE 16 USE_MESA 36 USE_XPM 236 There is a new variable, XAWVER, which is set to 6 when XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also passed to PLIST_SUB so ports that build Xaw based shared libraries can use this variable to substitute the shlib version number. There is also a provision of using a separate mtree file for XFREE86_VERSION=4, but that part is not enabled yet. Reviewed by: the ports list Tested by: make index (XFREE86_VERSION=3 only) (2) Add hebrew to list of valid categories. Submitted by: nbm
* Update to version 21.1.11.gj2000-07-264-506/+449
| | | | | | | | | Patch patch-al was obsoleted by a change in the target file. Except for one minor change in PLIST the submitted patch worked without errors. Excellent ! Submitted by: kiri@pis.toba-cmt.ac.jp
* The original tarball no longer exists on any of the servers. Changegj2000-07-143-128/+8
| | | | | | | | | | | | | | | | | | the port to use the new one - xemacs-21.1.10a.tar.gz. There are no changes to the source caused by this; only empty directories which were made by the old version were removed. Change PLIST to reflect removal of the directories. Since xemacs/site-lisp is no longer created by the installation, make the directory in Makefile. Add patch-an to fix a bug in lisp/package-get.el caused by mishandling of md5 package checksums. PR: 19855 Submitted by: Vivek Khera (PR), TAOKA Satoshi (patch - partly used), Mr. Kiriyama (patch-an)
* As threatened on freebsd-ports: all startup scripts know about the twotg2000-07-051-9/+21
| | | | | | | options `start' and `stop' now (unless I have forgotten any). This allows us to call the scripts from /etc/rc.shutdown with the correct option. The (42 or so) ports that already DTRT before are unchanged.
* Bump png shared library version.sobomax2000-07-041-1/+1
| | | | Submitted by: Hajimu UMEMOTO <ume@mahoroba.org>
* Update to version 21.1.10.gj2000-06-074-10/+15
| | | | Reminded from: Paul Traina <pst@juniper.net>
* various portlint nits (spacing, variable ordering, SLAVEDIRS, etc.)mharo2000-04-213-3/+3
|
* Tiny cosmetic fixes.knu2000-04-151-1/+1
| | | | | Assure master ports and their lang-specific slaves of having consistent categories.
* Convert to PORT{NAME,VERSION}/PKGNAME{PREFIX,SUFFIX}.knu2000-04-131-3/+2
| | | | | | | - LANGPREFIX -> PKGNAMEPREFIX - PKGNAMEEXT -> PKGNAMESUFFIX Now ready to cooperate with `japanese/xemacs*'.
* I added logic to the Makefile to make it easier for me test whengj2000-02-181-16/+2
| | | | | | | PREFIX != LOCALBASE. Unfortunately, the change is guaranteed to break pacakging on bento. Revert to the old way of doing things. Why does this sort of thing always have to happen at 3 AM ?
* Update to version 21.1.9.gj2000-02-184-445/+644
| | | | | | | | | | As in ver. 21.1.7 the port creates lots of empty directories. This must be reflected in PLIST, which explains the big diff. I wish they'd make up their minds :-) Tested on i386 and Alpha. Also tested packaging. Submitted by: kiri@pis.toba-cmt.ac.jp
* Make yet more changes to support using xemacs21 with the xemacs-mule ports.gj2000-01-181-3/+3
| | | | | | | Whilke I'm here, fix a FATAL error reported by the latest version of portlint - can't use ${PREFIX} in a RUN_DEPENDS line anymore. Submitted by: KIRIYAMA Kazuhiko <kiri@pis.toba-cmt.ac.jp>
* Another change to support using this with xemacs-mule.gj2000-01-121-2/+0
| | | | | PR: 16051 (partly) Submitted by: KIRIYAMA Kazuhiko <kiri@pis.toba-cmt.ac.jp>
* Make myself the maintainer.gj2000-01-081-1/+1
| | | | Requested by: the old maintainer (me@freebsd.org)
* Change xemacs binary name so as to distingush mule binary.gj2000-01-081-1/+1
| | | | | | PR: 15934 Submitted by: KIRIYAMA Kazuhiko <kiri@pis.toba-cmt.ac.jp> Approved from: maintainer
* Update to version 21.1.8.gj1999-12-254-644/+477
| | | | | | | | | | | | | | | | | | | | | This change adds a framework so that xemacs21 can be used as the base port for the various xemacs-mule incarnations. This functionality has not been tested by the committer !!! Fixed up some fatal errors found by portlint. The submitter added compface.1 to LIB_DEPENDS, but the maintainer did not agree, so it has been eliminated. Version 21.1.8 removed all the empty directories which were created by version 21.1.7, so I had to modify PLIST accordingly. That explains the large number of changes to PLIST. This version does not seem to suffer from the "make world under -current and xemacs core dumps" syndrome. Submitted by: kiri@pis.toba-cmt.ac.jp Approved by: maintainer
* Fix a (assumed) cut-n-paste bug.marcel1999-11-271-0/+1
|
* Add Marcel's patches for Alpha support. I could only check that thesegj1999-11-193-0/+43
| | | | | | | | | patches apply without error. I don't have an Alpha to test on, but I assume that Marcel knows what he's doing. PR: addendum to 14916 Submitted by: marcel Approved by: the maintainer
* Here is a summary of the changes in the patch:gj1999-11-172-2/+4
| | | | | | | | | | | - fixed the plist so that you don't get an error message when using pkg_delete - added "-with-tiff=yes" to the configure command line, and tiff.4 to LIB_DEPENDS Submitted by: "Alec Wolman" <wolman@cs.washington.edu> Reviewed by: the maintainer
* Make the lock directory, /var/run/emacs/lock, in PLIST.gj1999-10-221-0/+1
| | | | Noticed by: Sheldon Hearn <sheldonh@uunet.co.za>
* Update this puppy to 21.1.7.gj1999-10-214-24/+117
| | | | | | | | | | | | Modified PLIST to make empty directories which are installed by the port. These empty directories are also removed in PLIST. Tested install/deinstall and pkg_add/pkg_delete. mail/mew/Makefile should be updated to reflect this change. PR: 14329 Requested by: the maintainer
* Keep up with the Joneses and update this port to version 21.1.6.gj1999-10-154-24/+109
| | | | | | | | | | | | | Delete the MULE support and refer the user to the xemacs-mule port. Add --with-png=yes to the list of CONFIGURE_ARGS. The port now creates scads of empty directories which, hopefully, can be deleted if the package gets deleted. Tested install/deinstall and packaging. Requested by: the maintainer
* Fix reistall.markm1999-08-311-1/+1
|
* echo -> ${ECHO}/${ECHO_MSG}mharo1999-08-281-7/+7
| | | | ln -> ${LN}
* Change Id->FreeBSD.obrien1999-08-251-1/+1
|
* chmod -> ${CHMOD}mharo1999-08-231-2/+2
| | | | chown -> ${CHOWN}
* Fix PLIST to reflect the fact that I changed xemacs.sh to xemacs21.shgj1999-06-241-1/+1
| | | | (a la xemacs20), but forgot to update PLIST.
* This is the latest version of xemacs - Xemacs 21.1.gj1999-06-237-2961/+588
| | | | | | | | | | | | This requires xemacs-packages which be will committed next. Xemacs now allows the user to maintain packages himself. See DESCR. This supersedes PR 11618, which was based on an older release. This commit was blasted over a repository copy of xemacs20, which is why there are so many changes. Submitted by: Michael Elbel (me@freebsd.org)
* Make it compile under -current again.gj1999-03-241-0/+20
| | | | Reported by: Satoshi's log file
* Use XEMACS_ARCH and XEMACS_VER and cleanup PLIST.steve1999-02-042-3271/+3340
|
* Add --with-session=yes to the config options. This is slightly differentgj1999-01-261-1/+2
| | | | | from the patch in the PR. PR: 9552
* Bump png's major number to 3.vanilla1999-01-231-2/+2
|
* Add --with-clash-detection to CONFIGURE_ARGS so that the file lockingsteve1999-01-041-1/+2
| | | | | | code is compiled in. Submitted by: TAOKA Satoshi <taoka@infonets.hiroshima-u.ac.jp>
* Forgot to update the PLISTs to reflect xemacs20.shgj1998-10-081-1/+1
|
* Move the lock directory to /var/run/emacs/lock per Satoshi'sgj1998-10-081-5/+5
| | | | | | request. To avoid conflicts with other emacsen rename xemacs.sh to xemacs20.sh.
* Do not use libDnd if we are package building (this is the --with-offix option).gj1998-10-021-3/+5
|
* Roll back libpng major to 2.asami1998-09-171-2/+2
|
* Roll back libXpm major to 4. Sorry, it wasn't a good idea to bump itasami1998-09-171-2/+2
| | | | in the first place.
* libpng major is now 3. Also remove regexp support in preparation forasami1998-09-151-2/+2
| | | | ELF conversion.
* jpeg is now converted to ELF so change LIB_DEPENDS lines accordingly.asami1998-09-151-2/+2
| | | | | (Note, since the shlib major didn't change this just removes the regexp support.)
* libXpm major is now 5. Also remove regexp support in preparation forasami1998-09-151-2/+2
| | | | ELF conversion.
* Fix the last commit so that it really works. There was a ';' in thegj1998-06-051-2/+2
| | | | | wrong place. Lesson learned: do not use old patches when committing !
* Install xemacs.sh into ${PREFIX}/etc/rc.d to create /var/run/xemacsgj1998-06-042-1/+5
| | | | | dynamically. This is needed now that /etc/rc removes everything in /var/run.
* Change JPEG shared library number to 9. This is to make sure that everyonejseger1998-05-051-2/+2
| | | | | | | | | installs the version of the port that uses shared library number 9 and the LIBRARY_VERSION set to the default. Normally this is against our policy (bumping the version number for minor things), however due to the major problems caused with the upgrade, Satoshi and I decided that this was best. Approved by: asami
* Update Xeamcs to version 20.4. MASTERSITES cleaned up; a lot of themgj1998-04-203-3504/+3270
| | | | | | either didn't have xemacs-20.4 or it was located in a different place. Tested packaging and re-installing. Submitted by: maintainer
* Switch remaining ports to use jpeg lib version 8.0.jseger1998-04-161-2/+2
|
* upgrade png majorache1998-03-291-2/+2
|
* Xemac's send-pr is causing me too many problems and it's broken anyway,obrien1998-03-022-4/+4
| | | | | so totally remove it. Portlint this baby.
* Revert previous change. Now faces will be autodetected as beforesteve1998-02-161-3/+7
| | | | | | | except when PACKAGE_BUILDING is defined where it will be disabled by default. Suggested by: asami and eivind
* Build this port with '--with-xface=no'.steve1998-02-151-1/+2
| | | | PR: 5656
* PR: ports/5357gj1998-01-021-1/+9
| | | | | | | | | | | | | Obtained from: Maintainer (partly) modify the Makefile to use PLIST.mule if USE_MULE is defined. This will allow the version with mule to be successfullt packaged and pkg_delete'd. Add a warning, obtained from the Maintainer, in the case where HAVE_MOTIF is defined but MOTIF is really lesstif. It seems that some users have seen problems with that constellation. Add pkg/PLIST.mule to be used for the mule version. Satoshi forgot to close the PR when he made his commit for the reported problem with generating a version with mule.
* Make the USE_MULE variable work (the mule distfile was separated).asami1997-12-272-3/+5
| | | | | | | I know some people are working on splitting this port up, so this is just a stop-gap solution until then. Also remove the extra "\" at the end of the last master site.
* update to xemacs-20.3. Packaging tested (under -current).gj1997-12-164-3520/+3524
| | | | Obtained from: maintainer (me@freebsd.org)
* replace /usr/local with ${PREFIX} in CONFIGURE_ARGSgj1997-11-191-3/+3
| | | | Obtained from: maintainer
* By popular demand remove the ``@unexec rm -rf'' and replace it withgj1997-11-131-3/+3
| | | | | @dirrm instead. Do not delete share/emacs since it may also be used by emacs.
* Change shared/xemacs/site-lisp to shared/emacs/site-lisp. Accordinggj1997-11-131-3/+3
| | | | | to the maintainer this directory is supposed to be shared between emacs and xemacs.
* Put the lock file in /var/run/xemacs/lock rather thangj1997-11-091-9/+4
| | | | | | | | | | | | ${PREFIX}/lib/xemacs/lock. Also simplfy removal of some directories with pkg_delete. Previously, the contents of ${PREFIX}/{lib,share}/xemacs/site-lisp was deleted and then the directories themselves using @dirrm. This didn't work in my tests, so I changed it to just ``@exec rm -rf'' the directories. PR: ports/4976 Submitted by: Sheldon Hearn
* Put the lock file in /var/run/xemacs/lock rather thangj1997-11-091-1/+6
| | | | | | | | | | | ${PREFIX}/lib/xemacs/lock. Also modify post-install to set the permissions on /var/run/xemacs/lock, ${PREFIX}/lib/xemacs/site-lisp and ${PREFIX}/share/xemacs/site-lisp, as done in PLIST, since ``make install'' doesn't do it. PR: ports/4976 Submitted by: Sheldon Hearn
* Submitted by: me@freebsd.orggj1997-09-046-0/+3610
new import of xemacs 20.2, including MULE support. Note that I tested that I could build with mule support, but I couldn't actually check the functionality. "make package" and pkg_delete both tested (under -current).
generated by cgit (git 2.34.1) at 2025-02-27 02:29:44 +0800