aboutsummaryrefslogtreecommitdiffstats
path: root/lang/perl5.6
Commit message (Collapse)AuthorAgeFilesLines
* SHA256ifyedwin2006-01-221-0/+2
| | | | Approved by: krion@
* Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtryedwin2006-01-221-81/+81
| | | | | Approved by: krion@ PR: ports/88711 (related)
* Don't use "." in MASTER_SITE_SUBDIR; it only applies to URLs withfenner2005-10-101-1/+1
| | | | | | %SUBDIR% in them, and the site that needed the "." doesn't. Approved by: Anton Berezin <tobez@tobez.org> (MAINTAINER)
* Fix LATEST_LINK issues.tobez2005-05-031-0/+2
| | | | Nudged by: krion
* If one of locale-related variables set to a bad value in the user'stobez2005-02-141-0/+5
| | | | | | | | | | | environment (like da_DK.ISO_8859-15 as opposed to da_DK.ISO8859-15 on -CURRENT), perl ports cannot be built. While this condition clearly is an operator error, it is still no excuse for the build failure. Fix that by cleaning locale-related variables for configure and build steps. No plist changes, no portrevision bump. Reported by: Flemming Jacobsen <fj quite-at batmule maybe-dot dk>
* Update bsd.port.mk's notion of the perl version (to 5.8.6) [1].tobez2005-02-022-21/+3
| | | | | | | | | | | | | | | | | | | | | | Use more correct OSVERSION threshold to distinguish between base system perl and perl from ports - the right value is 500036 [1]. Also, simplify OSVERSION-related logic in lang/perl5 and lang/perl5.8. Now it goes as follows: - for lang/perl5.8, if there is perl in the base system, install use.perl script, use a helpful pkg-message, and do not automatically update symlinks; - for lang/perl5.8, if there is no perl in the base system, do not install use.perl script, and update symlinks automatically; - for lang/perl5, always install use.perl; - for lang/perl5, never update symlinks automatically; - for lang/perl5, vary produced pkg-message depending on the presence of the base system perl. Bump PORTREVISION for both lang/perl5 and lang/perl5.8. [1] Approved by: portmgr
* The separation of p5 ports' manual pages and perl's own manual pages wastobez2005-02-023-22/+111
| | | | done incorrectly. Fix that.
* Update to 5.6.2. Also:tobez2005-02-0115-541/+1114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
* SIZEify (maintainer timeout)trevor2004-03-311-0/+2
|
* Respect OSVERSION in the pkg-install script. This allows package buildingmarcus2004-03-061-3/+7
| | | | | | | tinderboxes to do the righ thing reagrding Perl in a chroot/jail environment regardless of the underlying host OS version. Approved by: perl (tobez)
* Fix the perl builds.obrien2004-03-011-4/+4
|
* Fix "pkg_add -r perl" for 5.2-CURRENT (and later). This will now installobrien2004-03-011-0/+4
| | | | | | perl 5.8 for 5.2-CURRENT. Approved by: perl
* Use the correct pkg-message on recent versions of -CURRENT.marcus2004-02-051-1/+1
| | | | Reported by: bento via kris
* Don't run use.perl port by default on recent versions of -CURRENT.marcus2004-02-051-1/+1
|
* Don't run use.perl port by default on recent versions of -CURRENT.marcus2004-02-051-1/+1
|
* Build the DynaLoader with -fPIC to fix some build problems on amd64.marcus2003-12-032-1/+12
| | | | | Submitted by: tobez Approved by: portmgr (implicit)
* utilize SITE_PERLijliao2003-10-241-5/+5
| | | | | PR: 58166 Submitted by: Cheng-Lung Sung <clsung@dragon2.net>
* Add a patch to properly escape generated action attribute intobez2003-09-302-1/+16
| | | | | | | CGI::start_form. The escape code is taken from CGI.pm v.3.00. PR: 57391 Reported by: IIJIMA Hiromitsu <delmonta@ht.sakura.ne.jp>
* Make portlint(1) happy by changing strip to ${STRIP_CMD}osa2003-09-241-1/+1
| | | | | Submitted by: Oleg Karachevtsev <ok@etrust.ru> PR: 56998
* Respect global CC settings.sobomax2003-04-281-0/+1
| | | | Approved by: maintainer
* Under certain conditions, perl's configure script could pick a directorytobez2003-04-241-1/+2
| | | | | | | | other than ${LOCALBASE}/bin to install its scripts (h2ph, perldoc, and friends) to. Fix that. PR: 51350 Reported by: Oliver Brandmueller <ob@gruft.de>
* Patch Safe.pm (seetobez2003-04-212-1/+21
| | | | | | http://use.perl.org/articles/02/10/06/1118222.shtml?tid=5). Reported by: kuriyama
* Clear moonlight beckons.ade2003-03-072-1/+1
| | | | | | | Requiem mors pacem pkg-comment, And be calm ports tree. E Nomini Patri, E Fili, E Spiritu Sancti.
* Cleanup extra directories.kuriyama2003-02-181-1/+3
| | | | Approved by: tobez (maintainer)
* chase gdbm lib versionijliao2003-01-031-1/+1
|
* On recent 5-CURRENT, there is no Perl wrapper. It is therefore possiblebmah2002-12-053-6/+31
| | | | | | | | | | | | | | | | | that /usr/bin/perl5 doesn't exist, which violates some of use.perl's assumptions. Take care of this case. [1] Also in the case of a recent 5-CURRENT, automatically perform "use.perl port" during package/port installation. This helps the installation of sysinstall's new "Perl distribution", in that sysinstall doesn't need to do this explicitly as Yet Another Special Case. [2] PORTREVISION bump after all this good stuff. Requested by: bmah [1], jhb [2] Submitted by: tobez (port MAINTAINER) Approved by: portmgr (kris)
* Make perl's configure be aware of gcc command line syntax change fromtobez2002-11-014-4/+17
| | | | | | | | | | | -Acpu(i386) to -Acpu=i386 and similar. The patch is from Perlland: http://archive.develooper.com/perl5-porters@perl.org/msg79350.html While at it, add $ FreeBSD $ to the rest of the patches. Reported by: kuriyama
* Fix a bug in perl 5.6.1 described intobez2002-10-292-1/+12
| | | | | | | | | | | | | http://archive.develooper.com/perl5-porters@perl.org/msg58812.html with a patch from http://archive.develooper.com/perl5-porters@perl.org/msg58819.html While we normally do not fix non-FreeBSD problems with 3rd party software, it is expected that perl 5.6.1 will be used widely for some time to come, and the bug is bad enough to grant the inclusion of the patch here.
* Due to popular demant into each port which might be inserted into dependencysobomax2002-09-141-0/+4
| | | | | | | | | | list by bsd.port.mk insert anti foot-shooting device, which prevents infinite fork loop when the user defines corresponding USE_XXX in global make.conf, command line or environment. Similar devices should probably be inserted into ports that might be inserted into dependency list by others bsd.foo.mk files (bsd.ruby.mk, bsd.python.mk and so on.)
* Add two knobs:tobez2002-07-283-7/+34
| | | | | | | | | | | | WITH_PERL_MALLOC - to compile with perl's own malloc, as opposed to the freebsd system malloc. Some might find this useful, since perl's malloc is marginally faster in typical cases, and orders of magnitude faster in degenerate cases. Use with care. WITH_GDBM - to compile with gdbm support. Requested by: netchild (WITH_PERL_MALLOC), Joachim Leidinger <jojo@blackpoint.de> (WITH_GDBM)
* 1. Merge from src/contrib/perl5/lib/ExtUtils/Attic/Install.pm rev. 1.2:tobez2002-07-113-6/+14
| | | | | | | | | | | | | | Force installs. This is to allow (semi-)automatic garbage removal by "find /usr/libdata -ctime -N -delete". Well - substitute /usr/libdata with /usr/local/lib/perl5 here. Requested by: sheldonh 2. Do not link with libbind even if Configure detects it. A particular reason for that is that perl's getpw* stop working with NIS. Reported by: Russell Cattelan <cattelan@thebarn.com>
* During deinstallation, for *.ph files, replace find | xargs rm withtobez2002-06-161-1/+1
| | | | find -delete, for obvious reasons. No PORTREVISION bump.
* Fix manpath.config patching in case there is no system perl manpathtobez2002-06-161-4/+11
| | | | (read: -current). No PORTREVISION bump.
* 1. Do not do rm -rf as a mean to deinstall this port. Instead, aparttobez2002-06-164-4/+123
| | | | | | | | | | | | | | | from normal rmdir'ing and unexec rmdir'ing, do a find | xargs rm for generated .ph files, since those will differ in different versions of FreeBSD just like .h files may not be the same. 2. Install.pm is broken in 5.6.1 and leads to the wrong .packlist generation, which, in turn, breaks BSDPAN. Fix that. 3. Extend use.perl to patch /etc/manpath.config so that manpages for modules installed by this and other p5- ports are be available. PR: 39108 (item 1) Reported by: Dan Nelson <dan@dan.emsphone.com> (item 1)
* Bump PORTREVISION to take the new version of use.perl into account.dougb2002-06-091-1/+1
| | | | Requested by: tobez
* Update to better handle life as it is now in -current.dougb2002-06-091-9/+26
| | | | Approved by: tobez (MAINTAINER)
* Put SITEARCH and SITELIB paths in front of ARCHLIB and PRIVLIB in thetobez2002-06-039-8/+87
| | | | | | | | | | | | | | | | | | | @INC array. This takes care of the infamous problem of updating the packages already in the perl distribution. With this change, no tricks are any longer necessary for such p5 ports, except the usual tweaking of INSTALLDIRS in Makefile.PL. This last one can also be taken care of by an appropriate BSDPAN modifications, but until we have the `natural' @INC order in the 4.X base system perl, it is meaningless. Do not include iconv.h and do not link with libiconv. Iconv is not used by perl in any way currently, but it used to link it if found. Fix perl on freebsd/sparc64. PR: 33212 (iconv), 37605 (iconv), 38813 (sparc64) Reported by: Vivek Khera <khera@kciLink.com> (iconv), Martin Nilsson <martin@gneto.com> (iconv) Submitted by: jake (sparc64)
* Use a cleaner, documented way to obtain the path of BSDPAN. This fixestobez2002-05-242-3/+4
| | | | | | | the problems with threaded perl build. The threaded perl is curently unsupported by this port but seems to work fine with this fix applied. Reported by: Jens Fallesen <jens@fallesen.dk>
* Make make depend to work with the new gcc (the new preprocessor outputstobez2002-05-211-0/+13
| | | | | | | | | more stuff than the old one, which confuses makedepend script in the distribution). PORTREVISION is not bumped since there was no functionality change. Reported-by: too many to list here
* 1. Speed up the fetch stage by using groups of MASTER_SITES.tobez2002-05-202-10/+11
| | | | | | | 2. Remove the dependency on perl (rather important for this port). 3. Make the script this port installs use the version of perl from ports. Reported-by: (item 2) Juriy Goloveshkin <j@gu.ru>, Mark Huizer <xaa@timewasters.nl>
* Unforbid the port for the use of general FreeBSD public.tobez2001-12-207-16/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
* Make this port do the same thing whether databases/gdbm is installed ortobez2001-08-202-6/+3
| | | | | | not - do not install GDBM_File extension. PR: 29884
* Fix wrong directory name.tobez2001-06-301-1/+1
| | | | | PR: 28462 OK'ed by: markm
* Take over maintainership.tobez2001-06-131-1/+1
| | | | OK'ed by: markm
* Update for Perl 5.6.1.markm2001-04-117-259/+349
| | | | | | | As before, this is a "guru only" port. If you know what you are doing, go ahead and use it. If not - HANDS OFF! Perl 5.6.1 will be committed to "base" FreeBSD in a week or 2.
* Upgrade this to perl5.6.0 for _knowledgeable_ folks in STABLE whomarkm2001-03-227-585/+873
| | | | | | | | | | | | | really want it. This is still marked FORBIDDEN as there may be all sorts of horrible incompatabilities with the perl5 in "base", but folks who are willing to override this and experiment are welcome. Consider this to be only partially supported. I'll happily commit patches and fixes, but I don't want to answer too many questions. Sorry!
* Some style fixes in the lang category (usual round of spaces -> tabs)olgeni2001-02-051-1/+1
|
* Correct the COMMENTcpiazza2000-05-191-1/+1
| | | | | PR: 18638 Submitted by: Daniel S. Lewart <d-lewart@uiuc.edu>
* ftp.cdrom.com -> ftp.freesoftware.com, adjusting paths as I go.billf2000-05-141-1/+1
|
* Typo (PORTVESION -> PORTVERSION).asami2000-04-141-1/+1
|
* Convert to the PORTNAME - PORTVERSION syntax.obrien2000-04-121-3/+3
|
* FreeBSD.ORG -> FreeBSD.orgmharo1999-08-311-1/+1
| | | | | Prompted by PR: 13476, 13477 Submitted by: KATO Tsuguru
* ln -> ${LN}mharo1999-08-281-1/+1
|
* Change Id->FreeBSD.obrien1999-08-251-1/+1
|
* Commit #3/4 to enforce caps, no period.hoek1999-06-271-1/+1
| | | | | | | | | | | | FWIW, checkout of these things took 5+hrs, staying on the local .freebsd.org net w/o hitting the 'net at all. As promised, $ time cvs ci real 67m51.701s user 0m1.250s sys 0m5.345s
* Add '%D' so we get the whole path for the '@unexec rm's.steve1999-05-101-1/+2
| | | | | PR: 7848 Submitted by: Shigeyuki FUKUSHIMA <shige@kuis.kyoto-u.ac.jp>
* Use FORBIDDEN to indicate that this port shouldn't be built under any (some)asami1999-03-291-2/+2
| | | | | circumstances. This is different from BROKEN, which merely means we think it is broken.
* Use bsd.port.{pre,post}.mk. Either use them to avoid having to defineasami1998-11-111-4/+5
| | | | | | | | something already there (PORTOBJFORMAT, OSVERSION) or move stuff from after .include <bsd.port.mk> to before. (This is not by any means the complete list but just the ones I've noticed recently.)
* Perl 5 is in the system. Mark this port broken for 3.0 for that reason.markm1998-10-122-3/+6
| | | | | | | (Also minor repairs to PLIST - nuke ranlibs) Reviewed by: asami OK-ed by: jseger
* Make this port honour CFLAGS.markm1998-08-281-0/+11
| | | | Submitted by: axl (Sheldon Hearn)
* Upgrade to perl 5.005_02. This will have virtually no impact on ports thatmarkm1998-08-163-718/+497
| | | | have been converted to the new scheme.
* create needed directories before making .ph filesache1998-08-071-0/+1
|
* generate .ph files on package install nowache1998-08-072-291/+11
|
* Remove generated include .ph files which not present on every machine,ache1998-08-061-13/+0
| | | | mostly kerberos or obsoleted ones.
* Update to Perl 5.005_01.markm1998-08-067-630/+1043
|
* Run h2ph as part of post-install target. Note this doesn't get a completesteve1998-02-161-1/+2
| | | | | | | list of header files but does get enough that when perl needs more header files that it will hint to use h2ph. PR: 5738
* Upgrade to 5.004_04. Maintenance upgrade.markm1997-11-123-237/+239
|
* Add perl5 as an alias for the binary.obrien1997-10-062-1/+4
| | | | OKed by: Satoshi
* Patch to make this compile on 2.2.1markm1997-09-231-0/+10
|
* Corrent package name.markm1997-07-181-2/+2
| | | | Pointed out by: Satoshi
* Update to perl-5.004_01markm1997-07-183-243/+250
|
* Make suidperl install on 2.1.*markm1997-06-041-3/+11
| | | | Submitted by: pius@ienet.com
* Remove two initial ranlib's without any previous fileache1997-05-251-2/+0
|
* Upgrade to Perl5.004. SUID Perl Works for 3.0-current and 2.2.2!markm1997-05-247-1556/+574
|
* This is the Perl5 equivalent of the MNT_NOSUID patch that was put intoroberto1997-05-141-0/+42
| | | | | | | | | | | | | | | /usr/bin/perl a while ago. It works with 5.003 and 5.004-tobe. I can't test it on freefall (I don't have a setuid script to play with) but it works at home. I'll test on thud later. Every setuid script found on a partition mounted "nosuid" will not be executed and "Permission Denied" will be displayed. It won't be in soo-to-be-released 5.004 because it is not a FreeBSD speciific problem but it will be dealt with in 5.004_01 (maintenance release). Obtained from: Jörg's patch (edited for Perl5 by me).
* Add virtual category 'perl5'.wosch1997-04-201-2/+2
|
* Update to take advantage of new features in bsd.port.mk rev. 1.237.asami1996-12-111-9/+3
|
* Remove GDBM_File.3, it won't be built if gdbm isn't already installed.asami1996-12-102-3/+2
| | | | Reported by: markm
* Compress manpages in lib/perl5/man/man3 too. Add missing GDBM_File.3.asami1996-12-072-79/+104
|
* Add missing manpage (perl.1).asami1996-11-261-2/+2
|
* Compress a bunch of manpages. Remove unnecessary @ directives fromasami1996-11-181-1/+0
| | | | | | | | PLISTs. Note: I know that this is going to break some symlinks and/or .so includes, I will back some of these out as I run into these during package building.
* Converted to MAN[1-9NL]obrien1996-11-171-9/+7
|
* Correct my idea of what "FreeBSD after 2.2 needs". SuidPerl failed tomarkm1996-11-141-1/+2
| | | | compile.
* CATAGORIES+= -> CATAGORIES=obrien1996-11-121-2/+2
| | | | | Reordered vars where needed. Added MAINTAINERS where needed, many mkdir --> ${MKDIR}, install -> ${INSTALL_*}, etc.
* Use phkmalloc instead of Perl's own malloc. Also clean up the FreeBSDmarkm1996-11-022-31/+43
| | | | | hints file for future releases. This will be submitted to the Perl maintainers.
* Oh my goodness! Satoshi is finally fed up and decided to "clean up"asami1996-10-101-1/+1
| | | | | | | | | | all the COMMENTs! No package names, no version numbers, no "this is absolutix-3.1.2" type comments that have zero information contents. Now, without any bad examples to follow, nobody has an excuse to import a port with those kind of comments. :) Phew! 238 ports modified!
* (By way of Andrew Stesin):markm1996-07-271-0/+1077
| | | | | | | | | | | | | | | | | | | | | | | | | From: wjm@best.com (William J. Middleton) Newsgroups: comp.lang.perl.announce,comp.lang.perl.misc Subject: PATCH: perltrap.pod <- 425traps Date: 1 Jul 1996 14:49:58 GMT Approved: merlyn@stonehenge.com (comp.lang.perl.announce) Message-ID: <4r8oim$e5q@nadine.teleport.com> NNTP-Posting-Host: julie.teleport.com [The rush to 5.003 couldn't integrate this, so here it is] The following is a patch for perltrap.pod, from 5.003 (also 5.002). It integrates the latest version of my simple 425traps document. 425traps demonstrated, with examples, all of the traps which have been discovered and sent to me, which have bitten folks making the transition from perl4 to perl5. It also gave an example for each one, including all of the existing perl4 traps in perltrap.pod. As always, if you discover something that isn't documented in one form or another in here, and isn't an official (or at least reported) bug, drop me a line with it. Also, when or if any of these is ever formally declared a bug, I'll take it out.
* Update to perl5.003markm1996-07-144-84/+94
|
* Use setreuid instead of seteuid for permissions managementgpalmer1996-06-031-0/+72
|
* A little reformatting. Also conditionalize man page compression onasami1996-03-181-5/+8
| | | | NOMANCOMPRESS.
* Update to Perl 5.002.markm1996-03-165-98/+153
|
* Change category nome from "languages" to "lang". Also remove "programming"asami1995-11-221-2/+2
| | | | which appeared in some of them, everything here is a programming language! :)
* Upgrade to patchlevel 'm'jmz1995-07-053-24/+118
|
* Put back this long PLIST too.asami1995-05-121-3/+298
|
* Shortened the PLIST (aka +CONTENTS) file to under 4k to avoid bugmarkm1995-05-061-298/+3
| | | | | (this will be backed out when the bug is fixed, as is it is a hack rather that a fix)
* Corrected some spelling, and generally clarified the description.markm1995-04-251-2/+6
|
* Add -Dprefix=${PREFIX} in configure args.jmz1995-04-241-2/+2
|
* Add suidperl; man pages are gzip'edjmz1995-04-241-29/+32
|
* gzip man pages, strip binariesjmz1995-04-241-8/+11
|
* Put prep as primary site, move old primary to secondaryache1995-04-191-3/+3
| | | | Add more categories
* Add IS_INTERACTIVE. The Configure script checks for file descriptor 0,asami1995-04-181-1/+8
| | | | so you can't run it with all the stdio redirected.
* Perl5 port by Mark Murray. People, beat this!asami1995-04-175-0/+373
Submitted by: Mark Murray <markm@freebsd.org>
generated by cgit (git 2.34.1) at 2024-12-14 04:36:07 +0800