aboutsummaryrefslogtreecommitdiffstats
path: root/math
Commit message (Expand)AuthorAgeFilesLines
* - Utilize SITE_PERL instead of raw PERL_VER or PERL_VERSION.az2013-06-132-2/+2
* Fix build with new site_perl.kevlo2013-06-132-2/+2
* Don't hard code the perl version. While here, fix MASTER_SITES.kevlo2013-06-133-10/+7
* Fix the forgotten pre.mk which should have been changed to options.mkbapt2013-06-121-1/+1
* Fix build with clang (CFLAGS+=-Wno-return-type).bsam2013-06-121-0/+1
* - Update to 1.017jadawin2013-06-102-8/+4
* Update to 0.09.tobez2013-06-102-8/+4
* - Do not remove directories not created by this portmiwi2013-06-091-0/+1
* - Update to 0.30sunpoet2013-06-092-3/+3
* - Remove empty filesak2013-06-071-0/+0
* - Add dvipsk:build to USE_TEXstephen2013-06-061-1/+1
* update lang/sbcl to 1.1.8, and adjust dependent portsbf2013-06-064-4/+4
* Update to 1.04.tobez2013-06-062-3/+3
* Update to 1.01. Bring under perl@'s fold.tobez2013-06-062-10/+5
* Update to 0.11. Bring under perl@'s fold.tobez2013-06-062-9/+5
* Update to 0.611.tobez2013-06-062-3/+3
* fmake is sometime to bad :(bapt2013-06-061-1/+1
* Convert to new options frameworkbapt2013-06-061-50/+53
* Convert to new options frameworkbapt2013-06-062-121/+115
* Fix after conversion to new options frameworkbapt2013-06-062-225/+228
* Fix typo after corruptionbapt2013-06-061-1/+1
* Convert to OptionsNGeadler2013-06-061-1/+1
* Convert to OptionsNGeadler2013-06-062-10/+6
* Convert to new options frameworkbapt2013-06-051-12/+14
* Push the DOCS test into the right sectionbapt2013-06-051-4/+5
* Convert to new options frameworkbapt2013-06-0510-174/+148
* - Fix build with Tcl/Tk 8.6gahr2013-06-056-36/+5009
* Add upstream patch to fix the build with clang 3.3.rakuco2013-06-051-0/+116
* Convert to new options frameworkbapt2013-06-054-49/+35
* - Update The Glorious Glasgow Haskell Compiler to version 7.6.3pgj2013-06-0529-48/+48
* WITHOUT_NLS -> PORT_OPTIONS:MNLSbapt2013-06-042-14/+16
* - Update to 3.52.23miwi2013-06-045-62/+31
* - Update to 1.2.1.stephen2013-06-042-3/+3
* - Fix build with Tcl/Tk 8.6 by letting the build system locate the Tcl/Tkgahr2013-06-031-18/+0
* Update to 7.3.tobez2013-06-032-4/+3
* . Update COMMENT and pkg-descr, based on the Official Gnuplot Manual [1]glewis2013-06-033-53/+37
* - Put in use_gcc=4.6+. (It is not obvious that use_fortran=yes will implystephen2013-06-021-0/+1
* - Downgrade gcc requirement to 4.6.stephen2013-06-021-2/+3
* - Update to 0.7.3wen2013-06-014-10/+9
* - Fix PORTDOCSmiwi2013-05-311-0/+2
* - Do not try to remove dirs. not created by the portmiwi2013-05-312-6/+1
* Update math/glpk to 4.50 and adjust dependent portsbf2013-05-304-5/+5
* - Disable regression testmiwi2013-05-291-4/+4
* - Update to 0.6.5-2tota2013-05-292-4/+3
* Update math/R to 3.0.1-patched, and adjust dependent ports;bf2013-05-2858-685/+3447
* Update to 5.1.2 release.ale2013-05-272-3/+3
* Fix typo: LICENCE -> LICENSEehaupt2013-05-271-1/+1
* Update to 2.02.tobez2013-05-272-8/+4
* Update to 2.01. Bring under perl@'s fold.tobez2013-05-272-9/+5
* Update to 0.96.tobez2013-05-272-8/+4
* - Update to 1.7wen2013-05-263-71/+155
* Make the port really respect NLS optionbapt2013-05-261-1/+5
* The FreeBSD x11 team proudly presentszeising2013-05-251-3/+2
* Update to version 5.1.2pawel2013-05-252-3/+3
* Do not let system make.conf inpact the port's makefilebapt2013-05-251-5/+2
* - Update to 1.2miwi2013-05-243-11/+28
* - Update to 1.1miwi2013-05-243-10/+11
* - Update to 1.2miwi2013-05-242-9/+7
* - Update to 1.2.2.stephen2013-05-232-3/+3
* Update to 0.11.tobez2013-05-222-3/+3
* Update to 3.0605.tobez2013-05-222-3/+3
* Update to 0.7.tobez2013-05-212-3/+3
* Add missing files to plist;demon2013-05-212-516/+509
* This port installs the prerequisites for Mathworks (r) Matlab R2012a for Linuxbsam2013-05-205-0/+59
* Update calc to 2.12.4.8johans2013-05-203-9/+5
* - Update to 2.2.0.stephen2013-05-202-5/+4
* Fix DISTFILES for docs.demon2013-05-201-2/+2
* Update to version 1.7.0 (and unbreak with python-3.3).demon2013-05-205-542/+549
* - Fix missing python package prefixswills2013-05-201-1/+2
* Update to 13.05.rakuco2013-05-193-9/+5
* - Update to 0.3.820tota2013-05-192-3/+3
* KDE/FreeBSD team presents KDE SC 4.10.3 ports!makc2013-05-199-22/+19
* Update math/R-cran-gss to 2.0-14.dbn2013-05-182-3/+3
* Update to 0.6.tobez2013-05-172-8/+4
* - update to 0.32lth2013-05-172-19/+5
* Update to 0.02.tobez2013-05-172-3/+3
* - Fix plistmiwi2013-05-162-6/+2
* Update to 1.01.tobez2013-05-152-9/+5
* Bring this port under perl@'s fold.tobez2013-05-151-1/+1
* Update to 1.03.tobez2013-05-152-8/+4
* Update to 0.609.tobez2013-05-152-8/+4
* Update to 0.208.tobez2013-05-152-9/+5
* - Update MASTER_SITESmiwi2013-05-151-5/+4
* - Convert to PEAR_AUTOINSTALlmiwi2013-05-131-15/+3
* Update to 3.18.tobez2013-05-133-3/+7
* - Add global options (DOCS, NLS, etc) to the OPTIONS_DEFINE and partly revert...makc2013-05-122-7/+5
* Use USE_TEX.hrs2013-05-121-1/+1
* Rectify USE_TEX to support both of teTeX and TeXLive.hrs2013-05-129-14/+11
* - Update to 5.1.5wen2013-05-113-5/+5
* update math/glpk to 4.49, and adjust dependent portsbf2013-05-115-6/+18
* Update to 3.6.4.maho2013-05-102-4/+3
* - Update to 1.1.6.stephen2013-05-103-16/+4
* - Add patch to the maxima subpackage. This will act as a bandaid to stopstephen2013-05-101-0/+20
* - update to 0.11.0rm2013-05-094-24/+65
* - Update to 0.3.810.2tota2013-05-082-3/+3
* Convert from USE_READLINE to USES=readlinebapt2013-05-071-1/+1
* - Fix build problem with graphics/graphviz already installed [1]glarkin2013-05-072-8/+13
* Update math/R-cran-car to 2.0-17.dbn2013-05-072-4/+3
* update lang/sbcl to 1.1.7, and adjust dependent portsbf2013-05-064-2/+4
* - Update to 4.04tota2013-05-062-3/+3
* - Add missing dependenciestota2013-05-061-2/+5
* Update to 2.67.tobez2013-05-062-3/+3
* - Add new port: math/R-cran-RcppArmadillotota2013-05-064-0/+27
* - Add new port: math/R-cran-fracdifftota2013-05-064-0/+26
* -Add new port: math/R-cran-forecasttota2013-05-064-0/+29
* - Add new port: math/R-cran-ChangeAnomalyDetectiontota2013-05-064-0/+27
* Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetexhrs2013-05-069-15/+13
* Add new port math/R-cran-gss (2.0-13).dbn2013-05-064-0/+25
* - When DISABLE_MAKE_JOBS or MAKE_JOBS_UNSAFE is set, also setbdrewery2013-05-042-7/+2
* Mark as broken: does not fetchbapt2013-05-041-0/+1
* - Update to 1.3-3tota2013-05-032-3/+3
* Respect MAKEbdrewery2013-05-031-1/+1
* Please bmake(1)bapt2013-05-031-1/+1
* Please bmake(1)bapt2013-05-031-1/+1
* - Convert USE_ICONV=yes to USES=iconv again, because accidentally revertedstephen2013-05-021-1/+1
* - Update to 5.9.stephen2013-05-0211-54/+113
* - Update to 2.1sunpoet2013-05-022-3/+3
* - Update to 1.5.5wen2013-05-012-4/+3
* - Update to 1.0.9wen2013-05-012-3/+3
* Update coq to 8.4.2johans2013-04-302-4/+3
* - Update to 1.3.7.stephen2013-04-302-5/+4
* Update to 2.1.2. No user-visible changes.naddy2013-04-293-13/+16
* Rely on bsdtar to autodetermine the format of the distfiles when possiblebapt2013-04-291-5/+3
* - Convert USE_ICONV=yes to USES=iconvmva2013-04-277-10/+7
* - Update to 2.2miwi2013-04-263-7/+11
* - Convert USE_GETTEXT to USES (part 4)ak2013-04-265-7/+5
* - Update to 1.2miwi2013-04-263-24/+72
* More formatting fixeseadler2013-04-251-1/+1
* - Convert USE_GETTEXT to USES (part 3)ak2013-04-2511-11/+11
* Fix formatting of WWW line for my portseadler2013-04-251-1/+1
* - Convert USE_GETTEXT to USES (part 1)ak2013-04-242-4/+2
* Finish converting the whole ports tree to USES=pkgconfigbapt2013-04-236-14/+7
* Remove bogus use of NO_INSTALL_MANPAGESeadler2013-04-231-4/+0
* update to 5.1.0bf2013-04-222-3/+3
* Reassign skv@ ports to the heapbapt2013-04-221-6/+2
* Reassign p5-* ports from skv to perl@bapt2013-04-221-6/+2
* - Update to 4.2.31.0nivit2013-04-224-13/+11
* - Update to 4.2.31.0nivit2013-04-222-21/+42
* . Update to 4.6.3.glewis2013-04-223-10/+11
* update to 1.9.12bf2013-04-216-154/+42
* - Update to 1.19bdrewery2013-04-212-3/+3
* - Update to 1.3-2tota2013-04-213-4/+4
* Update math/R-cran-quadprog to 1.5-5dbn2013-04-202-4/+3
* - Update to 0.0-22tota2013-04-202-4/+3
* - Update to 1.3-1tota2013-04-202-4/+3
* - Update to 2.0.3tota2013-04-202-6/+5
* update to 3.1.3bf2013-04-192-9/+4
* update to 5.30.0bf2013-04-193-10/+25
* - Update to 4.3.3madpilot2013-04-192-5/+4
* - Remove unused PLIST_SUB variablesgahr2013-04-182-6/+18
* - Take maintainershipgahr2013-04-182-3/+55
* - Update to 1.1-1tota2013-04-173-5/+4
* - Update to 2.2-10tota2013-04-173-5/+4
* - Update to 1.3-1tota2013-04-173-7/+6
* - Update to 1.2.0.stephen2013-04-172-3/+3
* - Update to 1.7.0.stephen2013-04-172-3/+3
* - Update to 1.4.2.stephen2013-04-173-175/+18
* - Update to 1.18bdrewery2013-04-172-9/+5
* Upgrading to 0.6.1, to prepare for R 3.0.0.thierry2013-04-173-4/+13
* - Don't delete gnomehier directoriesbdrewery2013-04-162-3/+1
* - Fix builds when ENV is set and not executable by using proper SETENV for /u...bdrewery2013-04-141-2/+2
* - Fix build as non-root by using proper SETENV to reference /usr/bin/envbdrewery2013-04-141-6/+2
* - Update fityk to 0.9.8 (to unbreak build)sperber2013-04-033-22/+36
* - Update to 4.1wen2013-04-024-153/+326
* - Fix a minor dynamic linking problem for certain Haskell Cabal portspgj2013-03-311-0/+1
* - Fix packaging by removing unneeded PACKAGE_BUILDING hackbdrewery2013-03-312-14/+4
* fix the build after FreeBSD src svn r248751bf2013-03-301-6/+2
* fix the build after the math/suitesparse updatebf2013-03-303-13/+43
* GNU Emacs updatesashish2013-03-302-2/+2
* - Update Haskell ports from the development repositorypgj2013-03-3035-148/+106
* - Fix and update COMMENT.avilla2013-03-301-1/+1
* . The entry for app-defaults/Gnuplot is hidden behind %%X11%%, so hide theglewis2013-03-291-1/+1
* For perl@ owned ports:eadler2013-03-295-23/+8
* trim headers; switch to the new options format; fix builds after src r248751;bf2013-03-297-97/+88
* Style: tab -> space.eadler2013-03-296-6/+6
* update to 1.1-9bf2013-03-282-4/+3
* remove a problematic mirrorbf2013-03-281-1/+0
* KDE/FreeBSD team presents KDE SC 4.10.1 ports!makc2013-03-2722-69/+133
* - Update to 1.2.2.stephen2013-03-272-3/+3
* Update to 0.10.tobez2013-03-262-8/+4
* . Make gnuplot compile with clang and hence remove the GCC requirement.glewis2013-03-262-2/+12
* - Add global options (DOCS, NLS, etc) to the OPTIONS_DEFINE if it'smakc2013-03-251-1/+1
* - Update to 4.1.3wen2013-03-252-4/+3
* - Update to 0.3.11wen2013-03-252-4/+3
* - Update to 1.0.6wen2013-03-252-4/+3
* Replace the use of _GCC_BUILD_DEPENDS (which was never meant to begerald2013-03-242-3/+2
* . Update to 4.6.2.glewis2013-03-242-8/+3
* - Update to 2.6.2acm2013-03-232-6/+2
* - convert USE_CMAKE to USESmakc2013-03-2318-22/+18
* Armadillo is a C++ linear algebra library (matrix maths) aiming towards apawel2013-03-225-0/+395
* Mk/bsd.kde4.mk:makc2013-03-228-8/+11
* - Update to 0.96-4tota2013-03-222-4/+3
* Update to version 0.9.4.3.demon2013-03-222-3/+3
* Update gap to 4.6.3johans2013-03-222-4/+4
* - Update to 1.2.0wen2013-03-213-9/+15
* update to 5.0.3bf2013-03-212-17/+7
* Chasing Code_Aster's upgrade - no change.thierry2013-03-201-5/+1
* Add R module that provides collection of some tests commonly used fordanfe2013-03-194-0/+33
* - Reassign to the heap at maintainer's requesttabthorpe2013-03-191-6/+2
* This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.eadler2013-03-195-5/+5
* Convert to OptionsNG. trim header, use USES=pathfix instead of gnomehack.kwm2013-03-191-26/+14
* - Update to 5.8.stephen2013-03-194-4/+50
* "aaargh, quoted Makefile variables"eadler2013-03-192-12/+4
* - Update to 2.1.1.stephen2013-03-192-3/+3
* - Update to 1.2.1.stephen2013-03-192-9/+4
* update master sites; trim headers; reposition LICENSE, WWWbf2013-03-194-5/+5
* - Update to 0.37sunpoet2013-03-182-3/+6
* - Update to 0.36sunpoet2013-03-182-8/+7
* - Update to 0.36sunpoet2013-03-182-8/+7
* - Cleanup Makefile headersunpoet2013-03-181-5/+1
* - Update to 5.1.3madpilot2013-03-182-3/+3
* Trim Headerseadler2013-03-181-13/+3
* In categories starting with [h-m], remove empty lines from pkg-plist (anddanfe2013-03-173-5/+0
* - Convert to PEAR_AUTOINSTALLmiwi2013-03-171-12/+3
* - Remove needless quoting of BROKEN/IGNOREbdrewery2013-03-163-23/+10
* - Clean up cmake usagemakc2013-03-161-9/+2
* This port must USE_PKGCONFIG, else pkg-config will not be availableolgeni2013-03-141-0/+1
* Update to 3.1.2 release.ale2013-03-142-9/+5
* Replace CMAKE_INSTALL_PREFIX with PREFIX (in preparation for bsd.cmake.mk cle...makc2013-03-141-1/+1
* - adopt optionsNG and trim historical headersjgh2013-03-142-12/+8
* - Fix build with FORTRAN onmiwi2013-03-142-0/+26
* - Update to 2.0.0.a3miwi2013-03-1413-550/+66
* Fix plistbapt2013-03-131-2/+2
* Do not try to remove a directory not owned by the portbapt2013-03-132-6/+1
* Do not try to remove directories not created by the portbapt2013-03-121-1/+0
* Update to version 0.9.4.2.demon2013-03-113-9/+11
* - Update to 4.2.23.0nivit2013-03-092-3/+3
* Clean up my ports (and a couple of ports@ owned ones):eadler2013-03-092-1/+5
* Convert USE_BISON to USES= bisonbapt2013-03-088-41/+14
* - Add new knob USE_LHA [1]miwi2013-03-081-4/+1
* Update to 3.17.tobez2013-03-072-3/+3
* update math/R to 2.15.3, and adjust dependent portsbf2013-03-0740-32/+52
* switch to the new options formatbf2013-03-071-3/+4
* Unify files/patch-I2Ohash-large-input and files/patch-I2Ohash+src+util.c.maho2013-03-062-103/+6
* Add a fix to math/spooles from the CalculiX package.maho2013-03-063-2/+101
* update x11-toolkits/ocaml-lablgtk2 to 2.16.0+bugfixes, and adjustbf2013-03-063-12/+14
* - Convert to OptionsNGmiwi2013-03-063-38/+28
* Update to version 0.2.6pawel2013-03-052-5/+5
* update lang/sbcl to 1.1.5+bugfixes, and adjust dependent portsbf2013-03-034-4/+4
* update to 1.51; switch to new options formatbf2013-03-032-33/+42
* - Update *_DEPENDS on x11-toolkits/py-tkinter after _tkinter.so relocationlwhsu2013-03-031-2/+3
* - Update *_DEPENDS on x11-toolkits/py-tkinter after _tkinter.so relocationlwhsu2013-03-032-13/+6
* - Update to 2.1.0.stephen2013-03-032-3/+3
* - Update to 1.2.1.stephen2013-03-032-3/+3
* Update to version 5.1.2pawel2013-03-023-5/+5
* - Update to 0.6.5-1tota2013-03-012-3/+3
* - New port: math/vtk5-datagahr2013-03-016-0/+1645
* - Update to 20130226culot2013-03-012-8/+4
* - Update to 0.96-3tota2013-02-272-3/+3
* - Update to 0.6.5tota2013-02-272-3/+3