aboutsummaryrefslogtreecommitdiffstats
path: root/net/zebra
Commit message (Collapse)AuthorAgeFilesLines
* Fix info install.sumikawa2004-03-102-9/+4
| | | | Pointed out by: kris
* Upgrade to 0.94.sumikawa2004-03-055-3464/+3
|
* - Chase net -> net-mgmt repocopy of net-snmp4.pav2004-03-051-1/+1
| | | | | PR: ports/63722 Submitted by: Thomas Vogt <thomas@bsdunix.ch>
* Add dependecy when enabling snmp.sumikawa2004-02-021-0/+1
| | | | Reported by: Kuniaki KONDO <kuniaki@inetcore.com>
* Prevent remote dos attack.sumikawa2003-11-212-1/+24
| | | | | | See detail in http://rhn.redhat.com/errata/RHSA-2003-305.html Obtained from: redhat
* remove obsolete master_sitesedwin2003-11-031-2/+0
|
* Fix RIPv1 subnet bugssumikawa2003-05-212-1/+302
| | | | | Submitted by: jonny@jonny.eng.br (Joao Carlos Mendes Luis) Obtained from: http://www.geocrawler.com/archives/3/372/2002/10/0/9918592/
* Upgrade to ospf6d to 0.9.6p to fix the critical bug on AS-Externalsumikawa2003-04-274-14/+3431
| | | | | | LSA refreshing. Obtained from: zebra cvs
* Fix the ospfd MD5 authentication problem.sumikawa2003-03-282-1/+12
| | | | Submitted by: Kevin Schmidt <kps@ucsb.edu>
* Clear moonlight beckons.ade2003-03-072-1/+1
| | | | | | | Requiem mors pacem pkg-comment, And be calm ports tree. E Nomini Patri, E Fili, E Spiritu Sancti.
* FIx plist.sumikawa2002-12-132-1/+3
| | | | Approved by: portmgr(knu)
* Enable vtysh.sumikawa2002-11-181-2/+2
| | | | Reported by: "Vladimir B. " Grebenschikov <vova@sw.ru>
* Properly zero-out struct ifreq before passing it to the SIOCSIFFLAGSsobomax2002-10-072-5/+25
| | | | | | ioctl(2), so that it doesn't occasionally trigger promisc mode on interface. Reported/tested by: Vladimir B. Grebenschikov <vova@sw.ru>
* Add missing filekris2002-09-161-0/+1
|
* Upgrade to 0.93b.sumikawa2002-09-134-408/+2
|
* I take over maintainership.sumikawa2002-08-081-1/+1
| | | | Approved by: joe
* Fix the critical bug in capability negotiation.sumikawa2002-08-062-1/+80
| | | | Obtained from: NetBSD pkgsrc
* Support ospf6d in zebractl.shsumikawa2002-08-052-1/+5
| | | | | PR: ports/37996 Submitted by: ume
* Upgrade to 0.93a. It also includes critcal bug fix which OSPFv3 routessumikawa2002-07-294-13/+334
| | | | | | do not install in kernel. No response from: maintainer
* Add USE_SUBMAKE, where it might be necessary.sobomax2002-03-251-0/+1
|
* Drop Andreas as co-maintainer.joe2001-12-131-1/+1
| | | | Requested by: andreas
* Bump the revision number, which I should have done when I added thejoe2001-12-131-0/+1
| | | | additional patch in the last commit.
* Fix the use of ipv6 addresses on interfaces. (Submitted to the zebrajoe2001-12-131-0/+12
| | | | | | folk for the next release). Submitted by: Armin Arh <armin@schlund.de>
* Add some mirror sites for Zebra.joe2001-10-081-1/+7
|
* Upgrade to zebra-0.92a.joe2001-09-012-2/+2
| | | | | | | | * BGP: New config support. * OSPF: Redistirbution of loopback network problem is fixed. * OSPF6d: Various problems detected at N+I Tokyo are fixed. * Fix community-list "^$" matching bug. * -lsnmp check problem fixed.
* It looks like ripngd is installed by default now so remove it from thisjoe2001-06-221-2/+0
| | | | file to avoid a duplicate entry in the contents file.
* Start and stop ripngd in zebractl.joe2001-06-221-1/+4
| | | | Requested by: Jun Kuriyama <kuriyama@imgsrc.co.jp>
* Add SCRIPTS_ENV="WRKDIRPREFIX=${WRKDIRPREFIX}" to work around $WRKDIRPREFIXkuriyama2001-06-021-0/+1
| | | | | | | environment. No response from: maintainer Reference: <7mwv98irg6.wl@waterblue.imgsrc.co.jp>
* I'm looking after these ports for Andreas for a while so I'vejoe2001-05-251-1/+1
| | | | | changed the MAINTAINER line to an email alias that directs mail to us both.
* update to new zebra 0.91aandreas2001-03-235-5/+12
| | | | | | | | | | | - some workarounds concerning installation of zebra info files since sources doesn't contain all info files... - modified zebractl script to check, if zebra.conf exists, which is needed for every routing protocol, error message and exit if not found. From the author: "0.91 is basically a bugfix release. All of IPv6 codes are based upon new RIB codes" Bugfixes and features see ChangeLog file.
* - remove redirection to /dev/null for zebra and routing daemonsandreas2001-01-302-14/+10
| | | | | | | | | | you should be able to see error messages if there are any Since daemons are started using -d options, you should normally see no output... - bumped PORTREVISION, since its a major win being able to see error messages if there are any Submitted by: knarf@camelot.de
* - -d makes possible to start daemons in certain orderandreas2001-01-272-6/+6
| | | | | | | - for that purpose you have to remove the '&' forgot that in last commit. Submitted by: Frank Bartels <knarf@camelot.de>
* - start zebra processes with -d option to make sure that one processandreas2001-01-262-5/+6
| | | | | | | | starts after the other to prevent core dump. This fixes bgp coredump for Knarf - set PORTREVISION Submitted by: Frank Bartels <knarf@camelot.de>
* unbreak port.andreas2001-01-231-2/+1
| | | | | | | | | | | | | | | note: I tried to build a portname applying to the porters handbook conventions. Unfortunately it doesn't have a good example for version numbers like 0.90a. 0.90-alpha would have to be change to 0.90.a. So I thought it should be done this way for 0.90.a as well. But then you have to set DISTFILES and WRKSRC (the latter I forgot in a last minute change, sorry, which broke the port). And even if you get the port running again, then portlint tells you pretty things how to do it better ... All in all. It would be fine to add an example in porters handbook for cases like 0.90a, which should *not* be changed to 0.90.a ! Submitted by: Josef Karthauser <joe@tao.org.uk>
* - update to 0.90aandreas2001-01-232-3/+3
| | | | | | | | | | - update md5 checksum - make PORTVERSION porters handbook compliant, had to add DISTFILES so source is still fetchable. Maybe I misunderstood the description how to transpose version numbers, maybe the description should be changed, that 0.90a should also be allowed than to use 0.90.a - remove PORTREVISION, since PORTVERSION changed
* Massive style enforcement - use ^I instead of spaces for variables identation.sobomax2001-01-171-1/+1
|
* - configure: fixed logic in if-clause, so that dialog is only calledandreas2001-01-131-1/+1
| | | | | | if BATCH is not defined. Portrevision doesn't need to be bumped, since exactly this enables/unbreaks package building...
* - in usage message mention restart option, which is actually:andreas2001-01-132-2/+3
| | | | | | zebractl stop zebractl start - new functionality (visible) for people -> PORTREVISION
* upgrade to new zebra version 0.90andreas2001-01-126-24/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - removed PORTREVISION (new version) - new configure script: dialog menue allows you to set different zebra compile time options (if ! BATCH), currently supported: --with-libpam = enable PAM authentication for vtysh --enable-nssa = enable OSPF NSSA --enable-snmp = enable SNMP support - please note: port compiles fine when all options are set, but functionality has not been tested by me. - silence portlint, trim pkg-comment to <=70 columns - remove unneeded patch patch, 0.90 now contains fix for memory leak - cosmetic: add patch for Makefile.in (don't link with -g) - portlint: o.k. In this BETA --enable-unixdomain and --enable-newrib became default ! To get old implementation back use the following configure options: --enable-tcp-zebra # TCP/IP socket is used for protocol daemon and zebra. --enable-oldrib # Turn on old RIB implementation. Note: I didn't add these options to configure script, so that people don't choose the wrong thing ! Some milestones of this release (see file NEWS for complete list): - access-lists can have remarks - memory leak with access-list and prefix-list name fixed - UNIX domain socket server of zebra protocol is added - PointoPoint interface network bug fixed - Metric value is reflected to kernel routing table - New RIB implementation has been added: - BGP passive peer support problem is fixed - Redistributed IGP nexthop is passed to BGP nexthop - Fix bug of holdtimer is not reset when bgp cleared - BGP-MIB implementation is finished - When BGP connection comes from unconfigured IP address, close socket immediately. - BGP flap dampening feature is added * RIP - Fix bug of refreshing default route * OSPF - Fix bug of Hello packet's option is not properly set when interface comes up - Reduce unconditional logging - New command for virtual-link configuration - Memory leak related classfull network generation is fixed
* make port compile, patch was missing the subdir "lib" in its headerandreas2000-12-311-2/+2
| | | | Submitted by: Jeroen Ruigrok van der Werven <jruigrok@via-net-works.nl>
* Fix vty memory leakandreas2000-12-272-0/+19
| | | | | | | | | | | | | | | Patch in PR contains typo, got clean patch from zebra anon cvs server Wrote e-mail to security officer and freebsd-audit to ask for a) review b) what to do next (FreeBSD Ports Security Advisory?...) concerning a) the author of zebra already ok'd the patch. converning b) waiting for SO or fbsd-auditers to respond PR: 23856 Submitted by: Vincent Poy <vince@oahu.WURLDLINK.NET> Reviewed by: Kunihiro Ishiguro <kunihiro@zebra.org> Approved by: Kunihiro Ishiguro <kunihiro@zebra.org> Obtained from: PR (partly) + zebra anon cvs server
* zebra-0.89 has been replaced by zebra-0.89a.andreas2000-10-242-2/+2
| | | | | | | | | fix: multiple route entry for same type of route, which caused problem for BGP implicit withdraw. If you are using zebra-0.89 and have a problem with multiple BGP routes in zebra for one prefix, please update. Obtained from: Kunihiro Ishiguro <kunihiro@zebra.org>
* Fix own typo -- forgot a ">".asami2000-10-091-1/+1
| | | | Submitted by: bento
* Rename PLIST.v6 to pkg-plist.v6. (I can't think of a reason why thereasami2000-10-081-2/+1
| | | | | | are two commands "cat >" and "cat >>" when they both take one argument so I combined them together so they can do what the "cat" command's name came from.)
* forgotten in previous committ: new md5 checksumandreas2000-10-031-1/+1
|
* update to newest beta release 0.89andreas2000-10-032-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | added manpage entries in Makefile Highlights: o OSPF neighbor is supported. o IPv6 inteface's address information propagation bug is fixed. o BGP's various MED comparison methods are added. o BGP read lock problem is fixed. Release / contribution information (I think its maybe of interest concerning the status of zebra): From: Kunihiro Ishiguro <kunihiro@zebra.org> Date: Mon, 02 Oct 2000 19:46:41 -0700 I've not yet merged below contributions as of zebra-0.89: o OSPF Demand Circuits K N Sridhar <sridhar@euler.ece.iisc.ernet.in> o Kerberos 4, Kerberos 5 auth and DES CFB64 encryption. Magnus Ahltorp <ahltorp@nada.kth.se> These will be merged as soon as possible. o PIM-SM Robert.Olsson@data.slu.se Jens.Laas@data.slu.se Will be added after zebra-1.0 release.
* Upgrade to zebra-0.88.joe2000-08-182-2/+2
|
* Add three info files.asami2000-07-051-0/+3
| | | | Found by: bento
* update to 0.87andreas2000-06-282-2/+2
|
* Update zebra to 0.86andreas2000-05-012-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From its developer: Hi, this is Kunihiro. I think this version is the most stable OSPF version ever had. We'll keep on fixing and adding new feature to ospfd. And also some BGP's route selection problems are fixed. Many patches are included. * Changes in zebra-0.86 * Changes in lib ** Fix bug of exec-timeout command which may cause crush. ** Multiple same policy for "access-list", "ip prefix-list, "as-path access-list", "ip community-list" is not duplicated. ** It used to be "ip prefix-list A.B.C.D/M" match routes which mask >= M. Now default behavior is exact match so it only match routes which mask == M. * Changes in bgpd ** "match ip address prefix-list" is added to route-map. ** A route without local preference is evaluated as 100 local preference. ** Select smaller router-id route when other values are same. ** Compare MED only both routes comes from same neighboring AS. ** "bgp always-compare-med" command is added. ** Now MED value is passed to IBGP peer. ** When neighbor's filter is configured with non-existent access-list, as-path access-list, ip prefix-list, route-map. The behavior is changed from all permit to all deny. * Changes in ospfd ** Fix bug of external route tag byte order. ** OSPF Neighbor deletion bug which cause crush is fixed. ** Some route calculation bug are fixed. ** Add sanity check with router routing table. ** Fix bug of memory leak about linklist. ** Fix bug of 1-WayReceived in NSM. ** Take care of BIGENDIAN architecture. ** Fix bug of NSM state flapping between ExStart and Exchange. ** Fix bug of Network-LSA originated in stub network. ** Fix bug of MS flag unset. ** Add to schedule router_lsa origination when the interface cost changes. ** Increment LS age by configured interface transmit_delay. ** distribute-list is reimplemented. ** Fix bug of refresh never occurs. ** Fix bug of summary-LSAs reorigination. Correctly copy OSPF_LSA_APPROVED flag to new LSA. when summary-LSA is reoriginatd. ** Fix bug of re-origination when a neighbor disappears. ** Fix bug of segmentation fault with DD retransmission. ** Fix network-LSA re-origination problem. ** Fix problem of remaining withdrawn routes on zebra. * Changes in ripd ** Do not leave from multicast group when interface goes down bug is fixed. * Changes in zebra ** Remove client structure when client dies. ** Take care static route when interface goes up/down.
* Update with the new PORTNAME/PORTVERSION variablescpiazza2000-04-101-2/+2
|
* upgrade to 0.84bandreas2000-01-234-25/+13
| | | | | | | | | And port changes from sumikawa@ebina.hitachi.co.jp: - add 'ipv6' on CATEGORIES - get rid of 'USE_INET6' and use 'OSVERSION' instead of it. - make PLIST.v6 only difference from PLIST for easily maintanance Submitted by: sumikawa@ebina.hitachi.co.jp
* Upgrade to 0.84andreas2000-01-222-2/+3
|
* Support IPv6. if 'USE_INET6' is defined, ripngd and ospf6d are installed.sumikawa2000-01-093-0/+28
| | | | Approved by: andreas(maintainer)
* use rc.conf instead rc.conf.localandreas1999-12-251-1/+1
| | | | Submitted by: Mike Smith <msmith@FreeBSD.org>
* tell the user to use rc.conf.local, to start zebra ...andreas1999-12-241-1/+1
|
* - Upgrade to 0.83aandreas1999-12-243-5/+61
| | | | | | | | | | | | - remove zebra.sh from ${PREFIX}/etc/rc.d - start zebra now from /etc/rc.conf.local - new zebra start script is ${PREFIX}/sbin/zebractl {start|stop|restart} Example: /etc/rc.conf.local: defaultrouter="NO" router_enable="YES" router="/usr/local/sbin/zebractl" router_flags="start"
* Update to zebra-0.83a.joe1999-12-232-2/+2
|
* Upgrade to 0.81andreas1999-11-093-3/+2
|
* Update zebra to 0.79andreas1999-09-192-2/+2
| | | | | This software is still under developement Please read the README's or subscribe to the zebra mailing list
* FreeBSD.ORG -> FreeBSD.orgmharo1999-08-311-1/+1
| | | | | Prompted by PR: 13476, 13477 Submitted by: KATO Tsuguru
* $Id$ -> $FreeBSD$peter1999-08-301-1/+1
|
* chmod -> ${CHMOD}mharo1999-08-231-2/+2
| | | | chown -> ${CHOWN}
* Upgrade to zebra 0.77andreas1999-08-192-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Kunihiro Ishiguro <kunihiro@zebra.org> Date: Sun, 15 Aug 1999 23:47:59 +0900 This beta includes brand new ripd. Almost codes of ripd is rewritten. ripd's dynamic `network' command configuration is improved. `timers basic' command's semantics is changed to conforms to RFC2453. ripngd is also updated as same as ripd. IPv6 kernel route handling bug is fixed. SIGUSR1 reopen logging file. ospfd's bug of originating network LSA is fixed. Redistribute routes handling is much improved. Now `no redistribute' works as expected. BGP-4+ withdraw bug is fixed. IPv6 router advertisement codes are added but not yet usable. * Changes in zebra-0.77 * Changes in lib ** SIGUSR1 reopen logging file. ** route-map is extended to support multi-protocol routing information. ** When compiling under GNU libc 2.1 environment don't use inet6-apps. * Changes in zebra ** Basic IPv6 router advertisement codes added. It is not yet usable. ** Fix IPv6 route addition/deletion bug is fixed. ** `show ip route A.B.C.D' works * Changes in bgpd ** When invalid unfeasible routes length comes, bgpd send notify then continue to process the packet. Now bgpd stop parsing invalid packet then return to main loop. ** BGP-4+ withdrawn routes parse bug is fixed. ** When BGP-4+ information passed to non shared network's peer, trim link-local next-hop information. ** `no redistribute ROUTE_TYPE' withdraw installed routes from BGP routing information. ** `show ipv6 route IPV6ADDR' command added. ** BGP start timer has jitter. ** Holdtimer configuration bug is fixed. Now configuration does not show unconfigured hold time value. * Changes in ripngd ** Now update timer (default 30 seconds) has +/- 50% jitter value. ** Add timers basic command. ** `network' configuration is dynamically reflected. ** `timers basic <update> <timeout> <garbage>' added. * Changes in ripd ** Reconstruct almost codes. ** `network' configuration is dynamically reflected. ** RIP timers now conforms to RFC2453. So user can configure update, timeout, garbage timer. ** `timers basic <update> <timeout> <garbage>' works. * Changes in ospfd ** Bug of originating network LSA is fixed. ** `no router ospf' core dump bug is fixed. * Changes in ospf6d ** Redistribute route works.
* Changes in 0.75, 0.76 is a bugfix release ...andreas1999-08-112-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BGP-4+ route handling is much improved. ripngd perform route aggregation with aggregate-address command. When zebra starts up, delete all installed routes which installed by zebra. ospfd DR election problem fixed. `terminal length 0' bug is fixed. BGP route-map now properly handles permit/deny and match/no match mixture. This fix is done by Rick Payne <rickp@rossfell.co.uk>. -- Kunihiro Ishiguro -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- * Changes in zebra-0.75 * Changes in lib ** `termnal length 0' bug is fixed. * Changes in zebra ** When zebra starts up, sweep all zebra installed routes. If -k or --keep_kernel option is specified to zebra dameon. This function is not performed. * Changes in ripngd ** Aggreagte address command supported. In router ripngd, `aggregate-address IPV6PREFIX' works. * Changes in bgpd ** Input route-map's bug which cause segmentation violation is fixed. ** route-map method improved. ** BGP-4+ nexthop detection improved. ** BGP-4+ route re-selection bug is fixed. ** BGP-4+ iBGP route's nexthop calculation works. ** After connection Established `show ip bgp neighbor' display BGP TCP connection's source and destination address. ** In case of BGP-4+ `show ip bgp neighbor' display BGP-4+ global and local nexthop which used for originated route. This address will be used when `next-hop-self'. * Changes in ospfd ** Fix bug of DR election. ** Set IP precedence field with IPTOS_PREC_INTERNET_CONTROL. ** Schedule NeighborChange event if NSM status change. ** Never include a neighbor in Hello packet, when the neighbor goes down.
* Remove two files that aren't installed anymore.billf1999-08-081-2/+0
| | | | Noticed By: bento's logs.
* Upgrade to 0.74andreas1999-07-312-3/+3
| | | | | | | | | | | | | | | OSPFd core dump during startup should be fixed. BTW it's still not a complete OSPF implementation as the author says on the mailing list: "This is the first beta relase which includes (partly) workable ospfd. Now ospfd works as inter area OSPF router. When it works properly route goes into the kernel. Please note it does not support intra area route, AS external route, multiple area, aging of LSA, etc... Please use ospfd only in test environment. BGP serious bug is fixed. ripngd is almost rewritten to conform to RFC2080. ospf6d's LSA data structure is improved. And also many bugs are fixed."
* remove typo, seems to be I'm a victim of the heat wave ;-)andreas1999-07-181-2/+2
|
* make zebra startup script executeable in final destination...andreas1999-07-181-1/+2
|
* - Improve startup scriptandreas1999-07-181-2/+2
| | | | | | - OSPF tested, zebra works well as designated (DR) and backup designated router (BDR) - Disable debugging to meet FreeBSD package policy (no debug)
* Make zebra port more user friendly be providing a nice start stop scriptandreas1999-07-182-1/+9
| | | | | | | | | | which is prefix-clean: - Install a zebra startup script ${PREFIX}/rc.d/zebra.sh - Can be used as start and stop script (expects "start" or - "stop" as argument). - If config file is present in ${PREFIX}/etc/zebra - Starts zebra, ripd, ospfd and bgpd - Stops (kills) ripd, ospfd, bgpd and at last zebra
* Update zebra to 0.73.andreas1999-07-183-4/+6
| | | | New beta, many bugfixes...
* Update zebra port to 0.68andreas1999-06-192-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From the announcement on the zebra mailing list: ospfd is much improved. DR election bug is fixed. Database description can be sent and received. Now Neighbor State Machine goes to Full. We are working on zebra-0.70 can provide real OSPF routing feature. bgpd aggregate-address command is added. At this momemnt summary-only aggregation is supported. `ip community-list' command is added. New route-map command such as `set community' or `match community' is added. zebra's IPv6 related bug is fixed. VTY input buffer overflow bug is fixed. DEFUN can eat (a|b|c) statement. So (deny|permit) is useful for like this: bgpd(config)# access-list test ? deny Access list for denies permit Access list for permits Changes in zebra-0.68 ++ Changes in lib - DEFUN() is extended to support (a|b|c) statement. - Input buffer overflow bug is fixed. ++ Changes in bgpd - `ip community-list' is added. - set community and match community is added to route-map statement. - aggregate-address A.B.C.D/M partly works. Now it works only summary-only mode. ++ Changes in zebra - IPv6 network address delete bug is fixed. ++ Changes in ospfd - DR election bug fixed. - Now Database Description can be send or received. - Neighbor State Machine goes to Full state. ++ Changes in ospf6d - router zebra related bug is fixed.
* upgrade to 0.64.1.itojun1999-05-103-4/+3
| | | | (I tested this with KAME-ready kernel so it should work fine)
* WWW: This is definately the daemon's work. In Chuck we trust.mharo1999-05-031-3/+1
|
* Update to the 19990420 version, which fixes the problem with thesteve1999-04-202-5/+3
| | | | | | | 'ip address' command on FreeBSD. Submitted by: Jeroen Ruigrok/Asmodai <asmodai@wxs.nl> Ok'd by: maintainer
* marked BROKENandreas1999-04-192-3/+5
| | | | | | | | | zebra isn't working Can't set interface's address. Can't set interface's address. Can't set interface's address. Can't set interface's address. waiting for a fix from author.
* upgrade zebra to new version from 19990408andreas1999-04-133-5/+7
| | | | PR: 11063
* only styleandreas1999-04-111-2/+2
|
* update base version to 981222.itojun1999-01-073-7/+11
| | | | Reviewed by: Andreas Klemm <andreas@klemm.gtn.com> (maintainer)
* Make this package again.steve1998-07-042-5/+1
|
* Mark this port broken:asami1998-06-071-4/+6
| | | | | | | | | | | === ===> Building package for zebra-980604 tar: can't add file sbin/ripngd : No such file or directory tar: can't add file etc/zebra/ripngd.conf.sample : No such file or directory === While I'm here, clean it up a little (move comment and CFLAGS override down, change += to = for variable defined only once).
* update to zebra 980604 snapshot.itojun1998-06-053-5/+7
| | | | add ripngd and ripngd.conf.sample to pkg/PLIST since I'm on IPv6 host:-)
* Don't compile with -g as default ...andreas1998-06-031-2/+3
| | | | But leave this note, to remind people, that it's a developer release !
* try to remove the etc/zebra directory more gracefully,andreas1998-06-032-2/+3
| | | | | | avoiding error messages on the screen: @unexec rmdir %D/etc/zebra 2>/dev/null Submitted by: Satoshi
* Give zebra a config directory of it's own ${PREFIX}/etc/zebraandreas1998-06-012-4/+6
| | | | Try to remove it when deinstalling.
* Import of the first alpha version of zebraandreas1998-05-315-0/+43
SNAP 980401 A free multithreaded RIP, OSPF, BGP4 router (server/reflector) IPv6 support is for: FreeBSD with INRIA FreeBSD with Hydrangea GNU/Linux with IPv6 Developer Mailing List: majordomo@zebra.org subscribe zebra [e-mail address] -- for English language ML subscribe zebra-jp [e-mail address] -- for Japanese language ML
generated by cgit (git 2.34.1) at 2024-11-07 17:59:12 +0800