aboutsummaryrefslogtreecommitdiffstats
path: root/print
Commit message (Expand)AuthorAgeFilesLines
...
* Add WWW;demon2003-02-216-1816/+1604
* dvipdfm is now part of teTeXijliao2003-02-207-115/+0
* upgrade to 2.0.1ijliao2003-02-208-3150/+9510
* Update to 2.0a1perky2003-02-194-220/+242
* Update to 1.2.3.cjh2003-02-197-172/+19
* Upgrade to 1.3.0.dannyboy2003-02-1925-170/+2545
* De-pkg-comment and make portlint a little bit happier.obraun2003-02-182-1/+1
* De-pkg-comment my non-ruby ports as well.knu2003-02-182-1/+1
* De-pkg-comment.knu2003-02-186-3/+3
* Fix include path order so headers from a previously installed versionnaddy2003-02-183-0/+48
* Update to version 1.2.5.naddy2003-02-1612-21/+24
* Update to 0.9.7.markp2003-02-146-162/+16
* Checksum update.nork2003-02-121-4/+4
* Updated to 7.05.6. I only have a PS printer, so others will have to testalane2003-02-123-20/+3
* Update to 20030211.nork2003-02-124-6/+6
* Fix breakage introduced with recent security update.naddy2003-02-122-1/+27
* Convert COMMENT to COMMENTFILE until these ports can be converted.kris2003-02-106-6/+6
* Update to 20030208.nork2003-02-096-6/+16
* Upgrade to 3.2.4, with a minor addition to the patch in the PR.mi2003-02-098-47/+100
* [Get a new printer. Upgrade the software for it. Before committing --mi2003-02-092-4/+5
* Change CPPFLAGS+=/LDFLAGS+= to CPPFLAGS=/LDFLAGS=.nork2003-02-081-2/+2
* Update to GNOME 2.2.marcus2003-02-0811-173/+157
* insert missing INSTALLS_SHLIBalane2003-02-071-0/+2
* Correct ports that were abusing the FORBIDDEN variable and replace withseanc2003-02-071-2/+2
* add Acrobat Reader 5 CJK font packsijliao2003-02-066-145/+174
* Add PostScript::Simple 0.05 - a perl module to produce PostScript files.tobez2003-02-046-0/+42
* add missing MANLANG for French manpagesalane2003-02-032-0/+4
* Conditionalize libgnugetopt dependencies.nork2003-02-022-3/+10
* Conditionalize libgnugetopt dependencies.nork2003-02-021-3/+9
* Remove two more directories.marcus2003-02-021-0/+2
* Update to 20030130.nork2003-01-316-8/+36
* Properly handle OMF files.marcus2003-01-311-0/+2
* Update to 20030125.nork2003-01-296-16/+58
* Upgrade to version 2001-09 (last version)jmz2003-01-283-7/+52
* remove parts of 1.1.19 patch that are just cvs tagsalane2003-01-281-14/+0
* Update to 2.1.3.nork2003-01-272-2/+2
* Update the MASTER_SITES and WWWmi2003-01-272-2/+2
* Remove the files, that should've removed in the previous commit. Asmi2003-01-2620-810/+0
* USE_REINPLACE instead of ${PERL}.nork2003-01-261-2/+3
* Upgrade to 1.2.3. Set MAINTAINER to the submitter.mi2003-01-2615-60/+100
* Fixed "Print Test Page" bug with help from Mike at Easy SW. Portrevisionalane2003-01-264-17/+68
* update message, show message to port builders tooalane2003-01-252-0/+6
* rev bump, keep rev in Makefile.commonalane2003-01-253-2/+4
* add workaround for borked Print Test Page to pkg-message filealane2003-01-252-2/+14
* fix all outstanding problems except printing test pagealane2003-01-246-9/+24
* fix for upgrading from early versions of cups w/o deinstalling firstalane2003-01-231-2/+2
* fix certificate file erroralane2003-01-232-2/+0
* change doc dir to not have version extension for compatibilityalane2003-01-231-110/+110
* change doc dir to not have version extension for compatibilityalane2003-01-233-3/+3
* Add a message for those using the package that they have to create and'alane2003-01-221-0/+18
* Long awaited update to 1.1.18.0alane2003-01-2230-751/+493
* Update to 1.99.97.marcus2003-01-203-2/+4
* Update to 1.116.3.marcus2003-01-203-2/+4
* Fix a segfault when XftConfig or ~/.xftconfig contains directories withmarcus2003-01-193-0/+34
* Update to 2.1.3.sobomax2003-01-185-51/+13
* add font2svgijliao2003-01-177-0/+57
* Add dependency on automake.arved2003-01-161-0/+1
* Update to 0.9.6arved2003-01-1618-540/+610
* Maintainer update to version 030109edwin2003-01-106-8/+14
* Update to 0.7.7yoichi2003-01-083-2/+6
* Update to 11.13yoichi2003-01-084-4/+14
* Make port fetchable again.edwin2003-01-046-36/+62
* upgrade to 8.00ijliao2003-01-04108-2535/+5616
* Update to 2.1arved2003-01-044-10/+17
* fix MAINTAINTER to ports@FreeBSD.orgdinoex2003-01-031-1/+1
* upgrade to 4.2.4ijliao2003-01-039-18/+528
* upgrade to 0.14ijliao2003-01-032-3/+2
* Ports guidelines for no MAINTAINER email address: s/freebsd-ports/ports/lioux2003-01-022-2/+2
* Upgrade to 0.64.obraun2003-01-022-2/+2
* fix pkg-plistandreas2003-01-012-0/+3
* Fix ghostscript on ia64. The logic to determine what the minimummarcel2002-12-192-0/+34
* Fix MASTER_SITESdinoex2002-12-101-1/+2
* These ports have been FORBIDDEN for 3 months, and removal was announcedkris2002-12-0953-553/+0
* Introduce a knob RUBY_NO_RD_HTML and enable it by default on alpha. Thisknu2002-12-072-17/+13
* Fix last commit in case of absence of texhash.alex2002-12-032-3/+3
* Fix Build on -CURRENT by updating to 20021125arved2002-12-014-4/+4
* "texhash" needs to be run after install, otherwise the installedalex2002-11-302-0/+5
* Add USE_AUTOCONF_VER. Don't use autoconf without it(tm).alane2002-11-271-0/+1
* Fix build on -CURRENTarved2002-11-271-0/+28
* Sync MD5 sum for ghostscript/eplaser-3.0.4-651.tgz with the ghostscript-gnu p...arved2002-11-273-0/+3
* Install the jadetex and pdfjadetex man pages.nik2002-11-252-1/+11
* Update to version 1.21.nik2002-11-252-2/+2
* Update to xmltex 1.9.nik2002-11-252-49/+5
* Fix the build with the latest version of bison.jmz2002-11-241-0/+10
* Update to 1.12.nork2002-11-232-2/+2
* upgrade to 2.1ijliao2002-11-232-3/+3
* Add Pup. pup (Printer Utility Program) is a GUI utility for maintaining yourarved2002-11-236-0/+52
* Forgot to add xforms.m4 in last commit.cjh2002-11-231-0/+98
* Maintainer update to version 1.1edwin2002-11-233-2/+7
* Maintainer update to version 20021120edwin2002-11-234-4/+4
* - update to 7.2.5andreas2002-11-232-2/+2
* Disable building on bento because of missing /usr/bin/lp /usr/bin/lpredwin2002-11-211-1/+5
* Update to 1.16perky2002-11-203-4/+24
* Upgrade to 1.11.obraun2002-11-194-16/+16
* Add gtklp, a GTK+ frontend to CUPS.marcus2002-11-186-0/+50
* Update to 1.2.1 and unbroke ports.cjh2002-11-179-47/+80
* Maintainer update to version 3.4.2edwin2002-11-164-4/+14
* Upgrade to version 20020605sada2002-11-164-6/+8
* upgrade to 20021113ijliao2002-11-164-4/+4
* Added a USE_PERL5.alane2002-11-151-0/+1
* Give up maintainership of these ports since I don't have time. Quanta goes toalane2002-11-151-1/+1
* 1. Updated to 0.9.1.alane2002-11-1514-428/+146
* A "patch-message" target is already used by bsd.port.mk.naddy2002-11-131-3/+1
* Update to 1.99.96.marcus2002-11-113-2/+4
* Add another MD5 sum for ghostscript/eplaser-3.0.4-651.tgzarved2002-11-112-0/+2
* remove unnecessary patch forgotten in prev. commitandreas2002-11-111-56/+0
* o Rollback PORTCOMMENT modifications while this feature's implementationlioux2002-11-11104-105/+52
* update to new apsfilter version 7.2.4andreas2002-11-102-3/+2
* backout last change by request of Kris Kenneways mail in -developersandreas2002-11-092-2/+1
* use new PORTCOMMENTandreas2002-11-092-1/+2
* remove extra fileijliao2002-11-081-1/+4
* make it build againijliao2002-11-082-4/+4
* Fix PERL dependencies for these ports (print/cups solves print/cups-baseedwin2002-11-071-0/+1
* - Support CC properlyijliao2002-11-071-3/+3
* upgrade to 2.5.3ijliao2002-11-074-22/+8
* upgrade to 1.3ijliao2002-11-073-19/+2
* Set MAINTAINER to ports@ for ports without one. "One" being "a maintainer"adamw2002-11-071-0/+2
* Fix PORTCOMMENTs that were killing INDEX builds.adamw2002-11-078-9/+6
* Fix for bison 1.75.cy2002-11-072-0/+22
* Use PORTCOMMENT in the Makefile, and whack the pkg-comment.adamw2002-11-07108-54/+108
* Use PORTCOMMENT variable instead of pkg-comment file.obraun2002-11-062-1/+1
* Ports needed pod2man, that means USE_PERL5=yesedwin2002-11-051-0/+1
* ImageMagick is needed at run time also:obrien2002-11-051-0/+1
* Step two in making print/acroread and print/acroread4 working againedwin2002-11-052-8/+8
* Update to the lastest version.kevlo2002-11-046-6/+8
* PERL -> REINPLACEedwin2002-11-042-4/+6
* PERL -> REINPLACEedwin2002-11-041-1/+3
* PERL -> REINPLACEedwin2002-11-041-4/+5
* Port needs Perl to build.edwin2002-11-041-0/+1
* This port requires perl.jmz2002-11-041-0/+1
* - set umask 022 in SETUP, so that it works under root environmentandreas2002-11-042-0/+57
* Remove the StUdLyCaPs from maintainer name, 'cause some folks won't realizealane2002-11-015-6/+6
* Changed MAINTAINER to my FreeBSD address.alane2002-11-015-6/+6
* Mark BROKEN until I can figure out what is happening.alane2002-10-312-36/+46
* Finally updated scribus to 0.8 + official patches. It's kind of a shamealane2002-10-3112-472/+828
* Fix a construct that causes make errors on platforms that are nottmm2002-10-311-1/+1
* - added needed run dependencyandreas2002-10-301-0/+3
* I recommend you to upgrade to this new versionandreas2002-10-294-6/+47
* Upgrade to 021025.obraun2002-10-278-24/+80
* Fix a problem with fonts showing up diagonally in mozilla-devel.marcus2002-10-252-0/+34
* Drop a line which contain ^G in gv.man.nork2002-10-231-0/+10
* upgrade to 4.2.3ijliao2002-10-2215-42/+2052
* Set MASTER_SITE_SUBDIR.jmz2002-10-221-0/+2
* Sync with the Debian "26" patch set.obrien2002-10-222-2/+2
* Removed RCSID sections from 1.1.16 backport patches.alane2002-10-213-21/+0
* Remove obsoleted port.kuriyama2002-10-1923-2217/+0
* Distfile was repacked (no content changes, except they now have akris2002-10-192-2/+1
* This file did not belong here. Sorry to all concerned for the thrash.alane2002-10-191-91/+0
* It's still BORKED, IN PROGRESS, MEN WORKING, THIS TRAIN WILL BE OUT OFalane2002-10-182-30/+25
* Fix security vulnerability described in bugtraq id 5808 and bump PORTREVISION.sobomax2002-10-184-8/+51
* Also affected by bugtraq id 5808, so mark as FORBIDDEN.sobomax2002-10-181-0/+2
* Fix security vulnerability (the patch backported from ggv2).sobomax2002-10-182-3/+149
* Update to 1.99.95.sobomax2002-10-183-2/+3
* Mark as forbidden. See bugtraq id 5808.sobomax2002-10-182-0/+4
* This is a new file. It is not used yet, and is still in a state ofalane2002-10-171-0/+92
* Updated long, short description.alane2002-10-172-9/+13
* Damn. forgot to remove the period at the end. Good ol' portlint.alane2002-10-171-1/+1
* Updated long, short descriptions.alane2002-10-172-9/+13
* Updated description, short description.alane2002-10-172-6/+24
* This is a new file. It will eventually replace Makefile.inc, which will then bealane2002-10-171-21/+43
* Actually add patchfile for rastertoprinter.c this time.dannyboy2002-10-166-3/+33
* add wprint 2.04ijliao2002-10-157-0/+67
* Found the problem. If it found a glib, which would only be a non-portsalane2002-10-151-1/+2
* o Update to 4.2.2.dannyboy2002-10-159-24/+1866
* Set MASTER_SITES to ${MASTER_SITE_LOCAL}jmz2002-10-151-1/+1
* Fix build.kris2002-10-142-2/+12
* Add to message mentioning installing pstoraster if not using a ps printer.alane2002-10-071-0/+7
* - Support LOCALBASE properlyijliao2002-10-0710-20/+140
* - Wipe x11* items out from device config dialog when WITHOUT_X11 is definedijliao2002-10-072-2/+12
* - Wipe x11* items out from driver config dialog when WITHOUT_X11 is definedijliao2002-10-073-3/+18
* Use RUBY_MOD*.knu2002-10-076-87/+87
* Reflect *_RD renaming.knu2002-10-071-4/+2
* Remove RUN_DEPENDS on graphics/py-imaging.perky2002-10-061-2/+1
* BROKEN: Does not linkkris2002-10-061-0/+2
* BROKEN: Does not compilekris2002-10-061-0/+2
* Fix port and remove BROKEN tag. The LIB_DEPENDS were being set with =kris2002-10-063-12/+6
* make it build againijliao2002-09-215-10/+5
* Fix MASTER_SITE_SUBDIR.marcus2002-09-212-2/+2
* BROKEN: Configure failskris2002-09-213-0/+6
* BROKEN: Does not buildkris2002-09-211-0/+2
* GNOME has just changed the layout of their FTP site. This resulted inmarcus2002-09-215-5/+5
* - Support CFLAGS/CXXFLAGS properlyijliao2002-09-201-5/+7
* upgrade to 1.2.1ijliao2002-09-2050-350/+840
* upgrade to 1.2.2ijliao2002-09-203-6/+20
* New port abntex version 0.5: Both classes and styles for both LaTexlioux2002-09-206-0/+77
* Removed dependency on cups-pstoraster. the cups port itself will takealane2002-09-191-1/+0
* Update to 1.116.1.marcus2002-09-173-3/+9
* Update to 0.37.sobomax2002-09-178-124/+6
* Add missing manpagekris2002-09-151-0/+2
* Fix pkg-plistkris2002-09-153-0/+3
* Due to popular demant into each port which might be inserted into dependencysobomax2002-09-141-0/+4
* Uses KDE2. No upgrade path known.alane2002-09-136-62/+0
* Update to 0.23.tobez2002-09-123-3/+6
* * Upgrade to 0.63a.obraun2002-09-124-26/+46
* Do the patch right. My brain was elsewhere, evidently. Fix octet-streamalane2002-09-111-3/+3
* Bug fix for non-PS octet-stream print failures. Patch taken from CVS.alane2002-09-112-1/+53
* Update to latest version release 2002/09/06.alane2002-09-112-2/+2
* To avoid a warning due to the 'patch-message' target being overridden,alfred2002-09-111-1/+1
* update master site and WWWijliao2002-09-102-2/+2
* Update MASTER_SITESdinoex2002-09-101-2/+2
* Upgrade to 0.63.obraun2002-09-093-7/+8
* Update MASTERSITES.obrien2002-09-081-2/+4
* Set maintainership to ports@.obraun2002-09-051-1/+1
* Fix build on -current by removing bogus duplicate declarations of thingskris2002-09-051-5/+7
* Chase the aspell so version bump. Bump PORTREVISION.marcus2002-09-036-6/+12
* Deploy USE_GNOMENG infrastructurelioux2002-09-026-6/+12
* Update to 3.4.1dwcjr2002-09-023-8/+8
* ${PERL} -> ${REINPLACE_CMD}dwcjr2002-09-022-5/+8
* Update to 020829dwcjr2002-08-314-4/+4
* - Update MASTER_SITESkevlo2002-08-302-1/+4
* Upgrade to version 1.9.13, now maintained on sourceforge.joerg2002-08-295-82/+107
* Update to version 1.2.1.naddy2002-08-272-2/+5
* Update to 1.99.90.marcus2002-08-272-3/+3
* Update to 0.7.3yoichi2002-08-263-5/+5
* Add missing .pyo files to each pkg-plistperky2002-08-231-0/+67
* Update to the lastest versionkevlo2002-08-226-8/+32
* Change MAINTAINER to my FreeBSD address.obraun2002-08-212-2/+2
* Fix build: malloc() prototype already provided by <stdlib.h>.naddy2002-08-211-1/+1
* Add back Gimp-Print (stp) driver support.naddy2002-08-2010-6/+132
* Add back Gimp-Print (stp) driver support.naddy2002-08-2012-12/+156
* Make further corrections to the use of sed: the -i option had beentrevor2002-08-201-3/+4
* POLA: if user says to make a package, package the constituent cups-* ports.alane2002-08-191-0/+4
* Changed maintainer to ports@geeksrus.net with blessing of previous maintainer.alane2002-08-193-4/+5
* Fix error in CVS version of USB driver. ++PORTREVISION.alane2002-08-182-3/+3
* Add BJC250 driver.naddy2002-08-1810-6/+126
* Update the cups usb backend to cvs version. This gives the user the choice ofalane2002-08-183-23/+56
* Add BJC250 driver.naddy2002-08-1815-9/+192
* Update to 1.15perky2002-08-175-75/+135
* Fix build on -CURRENT.naddy2002-08-161-0/+14
* Mark FORBIDDERN momentally, or update to the old version 1.Xtaoka2002-08-1222-8/+22
* add bibcursed 2.0.0ijliao2002-08-116-0/+42
* add txtbdf2ps 0.7.1ijliao2002-08-106-0/+48
* Proposed Patch is applied.mita2002-08-092-4/+4
* Use ulptX, not unlptX for USB printers. It appears the two are no longeralane2002-08-091-0/+22
* o Unmark BROKENlioux2002-08-088-428/+618
* The patching with sed was done incorrectly. Patch the INSTALLtrevor2002-08-082-9/+18
* Mark as broken. Version is not available anymore. Update to qt3 and 0.7.7alane2002-08-082-0/+4
* - Spin off Gimp-Print driver.naddy2002-08-0716-234/+122
* - Spin off Gimp-Print driver.naddy2002-08-0724-321/+159
* Update to version 2.7.naddy2002-08-064-126/+8
* Take over maintainership. Will move to 0.7.7 for QT3.alane2002-08-062-2/+2
* Upgrade to 3.5.1clive2002-08-044-5/+24
* add psmark 2.0ijliao2002-08-046-0/+43
* Removed {ja, ko, zh}/linux_locale dependencies. Because of version up ofmita2002-08-031-10/+0
* Remove spurious strcpy() that clobbers the stack.naddy2002-08-022-0/+14
* Chase shlib rev of devel/gettextade2002-08-0211-11/+11
* Make LyX be more specific, when it can not find the font it wantsmi2002-08-015-0/+45
* Upgrade to 1.2.0. Use the new, opensourced xforms. The possibility ofmi2002-08-0150-1440/+950
* Drop maintainership. I don't use lyx on a regular basis any more.dirk2002-08-015-5/+5
* 1. Make cups-pstoraster a dependency. This will help ensure that anyone whoalane2002-08-011-1/+3
generated by cgit (git 2.34.1) at 2024-12-27 06:36:47 +0800