#-*- tab-width: 4; -*- # ex:ts=4 # # Date created: 12 Nov 2005 # Whom: Michael Johnson <ahze@FreeBSD.org> # # $FreeBSD$ # # 4 column tabs prevent hair loss and tooth decay! # bsd.gecko.mk abstracts the selection of gecko-based backends. It allows users # and porters to support any available gecko backend without needing to build # many conditional tests. ${USE_GECKO} is the list of backends that your port # can handle, and ${GECKO} is set by bsd.gecko.mk to be the chosen backend. # Users set ${WITH_GECKO} to the list of gecko backends they want on their # system. .if defined(USE_GECKO) .if !defined(_POSTMKINCLUDED) && !defined(Gecko_Pre_Include) Gecko_Pre_Include= bsd.gecko.mk # This file contains some reusable components for mozilla ports. It's of # use primarily to apps from the mozilla project itself (such as Firefox, # Thunderbird, etc.), and probably won't be of use for gecko-based ports # like epiphany, galeon, etc. # # You need to make sure to add USE_GECKO=gecko to for your port can uses # one of these options below. # # Ports can use the following: # # USE_MOZILLA By default, it enables every system dependency # listed in '_ALL_DEPENDS'. If your port doesn't # need one of those then you can use '-' like # 'USE_MOZILLA= -png -vpx' to subtract the # dependencies. Experimental deps use '+' like # 'USE_MOZILLA= +speex +theora'. # # MOZILLA_PLIST_DIRS List of directories to descend into when installing # and creating the plist # # MOZ_PIS_SCRIPTS List of scripts residing in ${FILESDIR} to be # filtered through MOZCONFIG_SED and installed along # with our Pluggable Init Scripts (PIS) # # MOZ_SED_ARGS sed(1) commands through which MOZ_PIS_SCRIPTS are # filtered. There is a default set defined here, so # you probably want to add to MOZ_SED_ARGS rather # than clobber it # # MOZ_OPTIONS configure arguments (added to .mozconfig). If # NOMOZCONFIG is defined, you probably want to set # CONFIGURE_ARGS+=${MOZ_OPTIONS} # # MOZ_MK_OPTIONS The make(1) arguments (added to .mozconfig). If # NOMOZCONFIG is defined, you probably want to set # MAKE_ARGS+=${MOZ_MK_OPTIONS} # # MOZ_EXPORT Environment variables for the build process (added # to .mozconfig). If NOMOZCONFIG is defined, you # probably want to set MAKE_ENV+=${MOZ_EXPORT} # # MOZ_CHROME A variable for the --enable-chrome-format= in # CONFIGURE_ARGS. The default is omni. # # MOZ_TOOLKIT A variable for the --enable-default-toolkit= in # CONFIGURE_ARGS. The default is cairo-gtk2. # # MOZ_EXTENSIONS A list of extensions to build # # MOZ_PROTOCOLS A list of protocols to build (http, ftp, etc.) # # PORT_MOZCONFIG Defaults to ${FILESDIR}/mozconfig.in, but can be # set to a generic mozconfig included with the port # # NOMOZCONFIG Don't drop a customized .mozconfig into the build # directory. Options will have to be specified in # CONFIGURE_ARGS instead # MAINTAINER?= gecko@FreeBSD.org MOZILLA?= ${PORTNAME} MOZILLA_VER?= ${PORTVERSION} MOZILLA_BIN?= ${PORTNAME}-bin MOZILLA_EXEC_NAME?=${MOZILLA} MOZ_RPATH?= ${MOZILLA} USES+= cpe gmake iconv perl5 pkgconfig \ python:2.7,build desktop-file-utils CPE_VENDOR?=mozilla USE_PERL5= build USE_XORG= x11 xcomposite xdamage xext xfixes xrender xt .if ${MOZILLA} != "libxul" BUNDLE_LIBS= yes .endif .if ${MOZILLA_VER:R:R} >= 49 USES+= compiler:c++14-lang FAVORITE_COMPILER= ${COMPILER_TYPE} # c++14-lib CPPFLAGS+= -D_GLIBCXX_USE_C99 -D_GLIBCXX_USE_C99_MATH_TR1 \ -D_DECLARE_C99_LDBL_MATH # XXX ports/193528 .else USES+= compiler:c++11-lang .endif MOZILLA_SUFX?= none MOZSRC?= ${WRKSRC} WRKSRC?= ${WRKDIR}/mozilla PLISTF?= ${WRKDIR}/plist_files MOZ_OBJDIR?= ${WRKSRC}/obj-${ARCH:C/amd64/x86_64/}-unknown-${OPSYS:tl}${OSREL} MOZ_PIS_DIR?= lib/${MOZILLA}/init.d PORT_MOZCONFIG?= ${FILESDIR}/mozconfig.in MOZCONFIG?= ${WRKSRC}/.mozconfig # XXX Not ?= because fmake uses MAKEFILE internally MAKEFILE= ${WRKSRC}/client.mk MOZILLA_PLIST_DIRS?= bin lib share/pixmaps share/applications PKGINSTALL?= ${WRKDIR}/pkg-install PKGDEINSTALL?= ${WRKDIR}/pkg-deinstall PKGINSTALL_INC?= ${.CURDIR}/../../www/firefox/files/pkg-install.in PKGDEINSTALL_INC?= ${.CURDIR}/../../www/firefox/files/pkg-deinstall.in MOZ_PKGCONFIG_FILES?= ${MOZILLA}-gtkmozembed ${MOZILLA}-js \ ${MOZILLA}-xpcom ${MOZILLA}-plugin ALL_TARGET?= build MOZ_EXPORT+= ${CONFIGURE_ENV} \ PERL="${PERL}" MOZ_OPTIONS+= --prefix="${PREFIX}" MOZ_MK_OPTIONS+=MOZ_OBJDIR="${MOZ_OBJDIR}" CPPFLAGS+= -isystem${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib \ -Wl,-rpath,${PREFIX}/lib/${MOZILLA} -Wl,--as-needed .if ${OPSYS} != DragonFly # XXX xpcshell crash during install # use jemalloc 3.0.0 (4.0 for firefox 43+) API for stats/tuning MOZ_EXPORT+= MOZ_JEMALLOC3=1 MOZ_JEMALLOC4=1 .if ${OPSYS} != FreeBSD || ${OSVERSION} < 1000012 || ${MOZILLA_VER:R:R} >= 37 . if ${MOZILLA_VER:R:R} >= 48 MOZ_OPTIONS+= --enable-jemalloc=4 .else MOZ_OPTIONS+= --enable-jemalloc . endif .endif .endif # !DragonFly # Standard depends _ALL_DEPENDS= cairo event ffi graphite harfbuzz hunspell icu jpeg nspr nss png pixman soundtouch sqlite vpx .if ${PORT_OPTIONS:MINTEGER_SAMPLES} MOZ_EXPORT+= MOZ_INTEGER_SAMPLES=1 _ALL_DEPENDS+= tremor .else _ALL_DEPENDS+= vorbis .endif .if ! ${PORT_OPTIONS:MBUNDLED_CAIRO} cairo_BUILD_DEPENDS=cairo>=1.12.16_1,2:graphics/cairo cairo_LIB_DEPENDS= libcairo.so:graphics/cairo cairo_MOZ_OPTIONS= --enable-system-cairo .endif event_LIB_DEPENDS= libevent.so:devel/libevent2 event_MOZ_OPTIONS= --with-system-libevent ffi_LIB_DEPENDS= libffi.so:devel/libffi ffi_MOZ_OPTIONS= --enable-system-ffi .if exists(${FILESDIR}/patch-bug847568) graphite_LIB_DEPENDS= libgraphite2.so:graphics/graphite2 graphite_MOZ_OPTIONS= --with-system-graphite2 harfbuzz_LIB_DEPENDS= libharfbuzz.so:print/harfbuzz harfbuzz_MOZ_OPTIONS= --with-system-harfbuzz .endif hunspell_LIB_DEPENDS= libhunspell-1.3.so:textproc/hunspell hunspell_MOZ_OPTIONS= --enable-system-hunspell icu_LIB_DEPENDS= libicui18n.so:devel/icu icu_MOZ_OPTIONS= --with-system-icu --with-intl-api -jpeg_BUILD_DEPENDS=yasm:devel/yasm # XXX Remove files/patch-ijg-libjpeg once -turbo is default jpeg_USES= jpeg jpeg_MOZ_OPTIONS= --with-system-jpeg=${LOCALBASE} nspr_LIB_DEPENDS= libnspr4.so:devel/nspr nspr_MOZ_OPTIONS= --with-system-nspr nss_LIB_DEPENDS= libnss3.so:security/nss nss_MOZ_OPTIONS= --with-system-nss pixman_LIB_DEPENDS= libpixman-1.so:x11/pixman pixman_MOZ_OPTIONS= --enable-system-pixman png_LIB_DEPENDS= libpng.so:graphics/png png_MOZ_OPTIONS= --with-system-png=${LOCALBASE} .if exists(${FILESDIR}/patch-z-bug517422) soundtouch_LIB_DEPENDS= libSoundTouch.so:audio/soundtouch soundtouch_MOZ_OPTIONS= --with-system-soundtouch .endif sqlite_LIB_DEPENDS= libsqlite3.so:databases/sqlite3 sqlite_MOZ_OPTIONS= --enable-system-sqlite .if exists(${FILESDIR}/patch-z-bug517422) # XXX disabled: update to 1.2.x or review backported fixes theora_LIB_DEPENDS= libtheora.so:multimedia/libtheora theora_MOZ_OPTIONS= --with-system-theora tremor_LIB_DEPENDS= libogg.so:audio/libogg libvorbisidec.so:audio/libtremor tremor_MOZ_OPTIONS= --with-system-tremor --with-system-ogg vorbis_LIB_DEPENDS= libogg.so:audio/libogg libvorbis.so:audio/libvorbis vorbis_MOZ_OPTIONS= --with-system-vorbis --with-system-ogg .endif -vpx_BUILD_DEPENDS= yasm:devel/yasm vpx_LIB_DEPENDS= libvpx.so:multimedia/libvpx vpx_MOZ_OPTIONS= --with-system-libvpx .for use in ${USE_MOZILLA} ${use:S/-/_WITHOUT_/}= ${TRUE} .endfor LIB_DEPENDS+= libfontconfig.so:x11-fonts/fontconfig \ libfreetype.so:print/freetype2 .for dep in ${_ALL_DEPENDS} ${USE_MOZILLA:M+*:S/+//} .if !defined(_WITHOUT_${dep}) BUILD_DEPENDS+= ${${dep}_BUILD_DEPENDS} LIB_DEPENDS+= ${${dep}_LIB_DEPENDS} RUN_DEPENDS+= ${${dep}_RUN_DEPENDS} USES+= ${${dep}_USES} MOZ_OPTIONS+= ${${dep}_MOZ_OPTIONS} .else BUILD_DEPENDS+= ${-${dep}_BUILD_DEPENDS} .endif .endfor # Standard options MOZ_CHROME?= omni MOZ_TOOLKIT?= cairo-gtk2 MOZ_OPTIONS+= \ --enable-chrome-format=${MOZ_CHROME} \ --enable-default-toolkit=${MOZ_TOOLKIT} \ --enable-pie \ --with-pthreads # Configure options for install .if !defined(MOZ_EXTENSIONS) MOZ_OPTIONS+= --enable-extensions=default .else MOZ_OPTIONS+= --enable-extensions=${MOZ_EXTENSIONS} .endif .if !defined(MOZ_PROTOCOLS) MOZ_OPTIONS+= --enable-necko-protocols=default .else MOZ_OPTIONS+= --enable-necko-protocols=${MOZ_PROTOCOLS} .endif # others MOZ_OPTIONS+= --with-system-zlib \ --with-system-bz2 # API keys from www/chromium # http://www.chromium.org/developers/how-tos/api-keys # Note: these are for FreeBSD use ONLY. For your own distribution, # please get your own set of keys. MOZ_EXPORT+= MOZ_GOOGLE_API_KEY=AIzaSyBsp9n41JLW8jCokwn7vhoaMejDFRd1mp8 \ MOZ_GOOGLE_OAUTH_API_CLIENTID=996322985003.apps.googleusercontent.com \ MOZ_GOOGLE_OAUTH_API_KEY=IR1za9-1VK0zZ0f_O8MVFicn .if ${PORT_OPTIONS:MGTK3} MOZ_TOOLKIT= cairo-gtk3 .endif .if ${MOZ_TOOLKIT:Mcairo-gtk3} BUILD_DEPENDS+= gtk3>=3.14.6:x11-toolkits/gtk30 USE_GNOME+= gdkpixbuf2 gtk20 gtk30 .else # gtk2, cairo-gtk2 USE_GNOME+= gdkpixbuf2 gtk20 .endif .if ${PORT_OPTIONS:MOPTIMIZED_CFLAGS} CFLAGS+= -O3 MOZ_EXPORT+= MOZ_OPTIMIZE_FLAGS="${CFLAGS:M-O*}" MOZ_OPTIONS+= --enable-optimize .else MOZ_OPTIONS+= --disable-optimize .endif .if ${PORT_OPTIONS:MCANBERRA} RUN_DEPENDS+= libcanberra>0:audio/libcanberra .endif .if ${PORT_OPTIONS:MDBUS} BUILD_DEPENDS+= libnotify>0:devel/libnotify LIB_DEPENDS+= libdbus-1.so:devel/dbus \ libdbus-glib-1.so:devel/dbus-glib \ libstartup-notification-1.so:x11/startup-notification MOZ_OPTIONS+= --enable-startup-notification .else MOZ_OPTIONS+= --disable-dbus .endif .if ${PORT_OPTIONS:MFFMPEG} # dom/media/platforms/ffmpeg/FFmpegRuntimeLinker.cpp RUN_DEPENDS+= ffmpeg>=0.8,1:multimedia/ffmpeg .endif .if ${MOZILLA_VER:R:R} < 46 MOZ_OPTIONS+= --disable-gstreamer .endif .if ${PORT_OPTIONS:MGCONF} BUILD_DEPENDS+= ${gconf2_DETECT}:${gconf2_LIB_DEPENDS:C/.*://} USE_GNOME+= gconf2:build MOZ_OPTIONS+= --enable-gconf .else MOZ_OPTIONS+= --disable-gconf .endif .if ${PORT_OPTIONS:MGNOMEUI} BUILD_DEPENDS+= ${libgnomeui_DETECT}:${libgnomeui_LIB_DEPENDS:C/.*://} USE_GNOME+= libgnomeui:build MOZ_OPTIONS+= --enable-gnomeui .else MOZ_OPTIONS+= --disable-gnomeui .endif .if ${PORT_OPTIONS:MLIBPROXY} LIB_DEPENDS+= libproxy.so:net/libproxy MOZ_OPTIONS+= --enable-libproxy .else MOZ_OPTIONS+= --disable-libproxy .endif .if ${PORT_OPTIONS:MPGO} USES:= compiler:gcc-c++11-lib ${USES:Ncompiler*c++11*} USE_DISPLAY=yes ALL_TARGET= profiledbuild MOZ_EXPORT+=MOZ_OPTIMIZE_FLAGS="-Os" MOZ_PGO_OPTIMIZE_FLAGS="${CFLAGS:M-O*}" .endif .if ${PORT_OPTIONS:MALSA} LIB_DEPENDS+= libasound.so:audio/alsa-lib RUN_DEPENDS+= ${LOCALBASE}/lib/alsa-lib/libasound_module_pcm_oss.so:audio/alsa-plugins RUN_DEPENDS+= alsa-lib>=1.1.1_1:audio/alsa-lib MOZ_OPTIONS+= --enable-alsa .endif .if ${PORT_OPTIONS:MPULSEAUDIO} . if ${PORT_OPTIONS:MALSA} BUILD_DEPENDS+= pulseaudio>0:audio/pulseaudio . else # pull pulse package if we cannot fallback to another backend LIB_DEPENDS+= libpulse.so:audio/pulseaudio . endif MOZ_OPTIONS+= --enable-pulseaudio .else MOZ_OPTIONS+= --disable-pulseaudio .endif .if ${PORT_OPTIONS:MRUST} BUILD_DEPENDS+= rustc:${RUST_PORT} RUST_PORT?= lang/rust MOZ_OPTIONS+= --enable-rust .else MOZ_OPTIONS+= --disable-rust .endif .if ${PORT_OPTIONS:MDEBUG} MOZ_OPTIONS+= --enable-debug --disable-release STRIP= # ports/184285 .else MOZ_OPTIONS+= --disable-debug --disable-debug-symbols --enable-release .endif .if ${PORT_OPTIONS:MDTRACE} MOZ_OPTIONS+= --enable-dtrace \ --disable-gold . if ${OPSYS} == FreeBSD && ${OSVERSION} < 1100061 LIBS+= -lelf . endif STRIP= .else MOZ_OPTIONS+= --disable-dtrace .endif .if ${PORT_OPTIONS:MPROFILE} MOZ_OPTIONS+= --enable-profiling STRIP= .else MOZ_OPTIONS+= --disable-profiling .endif .if ${PORT_OPTIONS:MTEST} USE_XORG+= xscrnsaver MOZ_OPTIONS+= --enable-tests .else MOZ_OPTIONS+= --disable-tests .endif .if !defined(STRIP) || ${STRIP} == "" MOZ_OPTIONS+= --disable-strip --disable-install-strip .else MOZ_OPTIONS+= --enable-strip --enable-install-strip .endif # _MAKE_JOBS is only available after bsd.port.post.mk, thus cannot be # used in .mozconfig. And client.mk automatically uses -jN where N # is what multiprocessing.cpu_count() returns. .if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE) MAKE_JOBS_NUMBER= 1 .endif .if defined(MAKE_JOBS_NUMBER) MOZ_MAKE_FLAGS+=-j${MAKE_JOBS_NUMBER} .endif .if defined(MOZ_MAKE_FLAGS) MOZ_MK_OPTIONS+=MOZ_MAKE_FLAGS="${MOZ_MAKE_FLAGS}" .endif MOZ_SED_ARGS+= -e's|@CPPFLAGS@|${CPPFLAGS}|g' \ -e 's|@CFLAGS@|${CFLAGS}|g' \ -e 's|@LDFLAGS@|${LDFLAGS}|g' \ -e 's|@LIBS@|${LIBS}|g' \ -e 's|@LOCALBASE@|${LOCALBASE}|g' \ -e 's|@PERL@|${PERL}|g' \ -e 's|@MOZDIR@|${PREFIX}/lib/${MOZILLA}|g' \ -e 's|%%PREFIX%%|${PREFIX}|g' \ -e 's|%%CFLAGS%%|${CFLAGS}|g' \ -e 's|%%LDFLAGS%%|${LDFLAGS}|g' \ -e 's|%%LIBS%%|${LIBS}|g' \ -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ -e 's|%%PERL%%|${PERL}|g' \ -e 's|%%MOZILLA%%|${MOZILLA}|g' \ -e 's|%%MOZILLA_BIN%%|${MOZILLA_BIN}|g' \ -e 's|%%MOZDIR%%|${PREFIX}/lib/${MOZILLA}|g' MOZCONFIG_SED?= ${SED} ${MOZ_SED_ARGS} .if ${ARCH} == amd64 . if ${USE_MOZILLA:M-nss} USE_BINUTILS= # intel-gcm.s CFLAGS+= -B${LOCALBASE}/bin LDFLAGS+= -B${LOCALBASE}/bin . endif .elif ${ARCH:Mpowerpc*} USES:= compiler:gcc-c++11-lib ${USES:Ncompiler*c++11*} . if ${ARCH} == "powerpc64" MOZ_EXPORT+= UNAME_m="${ARCH}" CFLAGS+= -mminimal-toc . endif .elif ${ARCH} == "sparc64" # Work around miscompilation/mislinkage of the sCanonicalVTable hacks. MOZ_OPTIONS+= --disable-v1-string-abi .endif .else # bsd.port.post.mk pre-extract: gecko-pre-extract gecko-pre-extract: .if ${PORT_OPTIONS:MPGO} @${ECHO} "*****************************************************************" @${ECHO} "**************************** attention **************************" @${ECHO} "*****************************************************************" @${ECHO} "To build ${MOZILLA} with PGO support you need a running X server and" @${ECHO} " build this port with an user who could access the X server! " @${ECHO} "" @${ECHO} "During the build a ${MOZILLA} instance will start and run some test." @${ECHO} " Do not interrupt or close ${MOZILLA} during this tests! " @${ECHO} "*****************************************************************" @sleep 10 .endif post-patch: gecko-post-patch gecko-moz-pis-patch gecko-post-patch: .if exists(${PKGINSTALL_INC}) @${MOZCONFIG_SED} < ${PKGINSTALL_INC} > ${PKGINSTALL} .endif .if exists(${PKGDEINSTALL_INC}) @${MOZCONFIG_SED} < ${PKGDEINSTALL_INC} > ${PKGDEINSTALL} .endif @${RM} ${MOZCONFIG} .if !defined(NOMOZCONFIG) @if [ -e ${PORT_MOZCONFIG} ] ; then \ ${MOZCONFIG_SED} < ${PORT_MOZCONFIG} >> ${MOZCONFIG} ; \ fi .for arg in ${MOZ_OPTIONS} @${ECHO_CMD} ac_add_options ${arg:Q} >> ${MOZCONFIG} .endfor .for arg in ${MOZ_MK_OPTIONS} @${ECHO_CMD} mk_add_options ${arg:Q} >> ${MOZCONFIG} .endfor .for var in ${MOZ_EXPORT} @${ECHO_CMD} export ${var:Q} >> ${MOZCONFIG} .endfor .endif # .if !defined(NOMOZCONFIG) .if exists(${MOZSRC}/build/unix/mozilla-config.in) @${REINPLACE_CMD} -e 's/%{idldir}/%idldir%/g ; \ s|"%FULL_NSPR_CFLAGS%"|`nspr-config --cflags`|g ; \ s|"%FULL_NSPR_LIBS%"|`nspr-config --libs`|g' \ ${MOZSRC}/build/unix/mozilla-config.in .endif .if ${USE_MOZILLA:M-nspr} @${ECHO_MSG} "===> Applying NSPR patches" @for i in ${.CURDIR}/../../devel/nspr/files/patch-*; do \ ${PATCH} ${PATCH_ARGS} -d ${MOZSRC}/nsprpub < $$i; \ done .endif .if ${USE_MOZILLA:M-nss} @${ECHO_MSG} "===> Applying NSS patches" @for i in ${.CURDIR}/../../security/nss/files/patch-*; do \ ${PATCH} ${PATCH_ARGS} -d ${MOZSRC}/security/nss < $$i; \ done .endif @for f in \ ${WRKSRC}/directory/c-sdk/config/FreeBSD.mk \ ${WRKSRC}/directory/c-sdk/configure \ ${MOZSRC}/security/coreconf/FreeBSD.mk \ ${MOZSRC}/js/src/Makefile.in \ ${MOZSRC}/js/src/configure \ ${MOZSRC}/configure \ ${WRKSRC}/configure; do \ if [ -f $$f ] ; then \ ${REINPLACE_CMD} -Ee 's|-lc_r|-pthread|g ; \ s|-l?pthread|-pthread|g ; \ s|echo aout|echo elf|g ; \ s|/usr/X11R6|${LOCALBASE}|g' \ $$f; \ fi; \ done @if [ -f ${WRKSRC}/config/baseconfig.mk ] ; then \ ${REINPLACE_CMD} -e 's|%%MOZILLA%%|${MOZILLA}|g' \ ${WRKSRC}/config/baseconfig.mk; \ fi @${REINPLACE_CMD} -e 's|%%MOZILLA%%|${MOZILLA}|g' \ ${MOZSRC}/config/baseconfig.mk @${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g ; \ s|%%LOCALBASE%%|${LOCALBASE}|g' \ ${MOZSRC}/build/unix/run-mozilla.sh @${REINPLACE_CMD} -e 's|/usr/local/netscape|${LOCALBASE}|g ; \ s|/usr/local/lib/netscape|${LOCALBASE}/lib|g' \ ${MOZSRC}/xpcom/io/SpecialSystemDirectory.cpp @${REINPLACE_CMD} -e 's|/etc|${PREFIX}&|g' \ ${MOZSRC}/xpcom/build/nsXPCOMPrivate.h @${REINPLACE_CMD} -e 's|/usr/local|${LOCALBASE}|g' \ -e 's|mozilla/plugins|browser_plugins|g' \ -e 's|share/mozilla/extensions|lib/xpi|g' \ ${MOZSRC}/xpcom/io/nsAppFileLocationProvider.cpp \ ${MOZSRC}/toolkit/xre/nsXREDirProvider.cpp @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ ${MOZSRC}/extensions/spellcheck/hunspell/*/mozHunspell.cpp # handles mozilla pis scripts. gecko-moz-pis-patch: .for moz in ${MOZ_PIS_SCRIPTS} @${MOZCONFIG_SED} < ${FILESDIR}/${moz} > ${WRKDIR}/${moz} .endfor do-configure: gecko-do-configure gecko-do-configure: @(if ! ${CONFIGURE_ENV} ${DO_MAKE_BUILD} configure; then \ ${ECHO_MSG} "===> Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \ (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \ ${FALSE}; \ fi) pre-install: gecko-moz-pis-pre-install post-install-script: gecko-create-plist gecko-create-plist: # Create the plist ${RM} ${PLISTF} .for dir in ${MOZILLA_PLIST_DIRS} @cd ${STAGEDIR}${PREFIX}/${dir} && ${FIND} -H -s * ! -type d | \ ${SED} -e 's|^|${dir}/|' >> ${PLISTF} .endfor ${CAT} ${PLISTF} | ${SORT} >> ${TMPPLIST} gecko-moz-pis-pre-install: .if defined(MOZ_PIS_SCRIPTS) ${MKDIR} ${STAGEDIR}${PREFIX}/${MOZ_PIS_DIR} .for moz in ${MOZ_PIS_SCRIPTS} ${INSTALL_SCRIPT} ${WRKDIR}/${moz} ${STAGEDIR}${PREFIX}/${MOZ_PIS_DIR} .endfor .endif .endif .endif # HERE THERE BE TACOS -- adamw