#-*- mode: Fundamental; tab-width: 4; -*- # ex:ts=4 # # $FreeBSD$ # $NetBSD: $ # # Please view me with 4 column tabs! .if !defined(USE_GNOMENG) .if !defined(_POSTMKINCLUDED) # Please make sure all changes to this file are past through the maintainer. # Do not commit them yourself (unless of course you're the Port's Wraith ;). Gnome_Include_MAINTAINER= gnome@FreeBSD.org # This section keeps tests for optional software. These work off four # types of of variables. WANT_, WITH_, HAVE_ and USE_. The logic of # this is that a port can WANT support for a package, a user specifies # if they want ports compiles WITH certain features. This section tests # if we HAVE these features, and the port is then free to USE them. # The logic of this section is like this: # # .if defined(WANT_FOO) # .if defined(WITH_FOO) # HAVE_FOO=yes # .elif defined(WITHOUT_FOO) # .undef HAVE_FOO # .elif (if FOO installed) # HAVE_FOO=yes # .else # Print option message # .endif # .endif # # Although it apears a little more convoluted in the tests. # Ports can make use of this like so: # # WANT_FOO= yes # # .include # # .if defined(HAVE_FOO) # ... Do some things ... # USE_FOO= yes # .else # ... Do some other things ... # .endif # The following defines are for the various levels of libraries in the # GLib/GTK+/GNOME group of software. There are the following options: # # WITH_GLIB, WITH_GTK, WITH_ESOUND, WITH_IMLIB, WITH_GNOME: # - Only set by the user, indicates that they always want # this setting. # WITHOUT_GLIB, WITHOUT_GTK, WITHOUT_ESOUND, WITHOUT_IMLIB, WITHOUT_GNOME: # - Only set by the user, indicates that they never want # this setting. # # The following variables might be set: # # HAVE_GLIB, HAVE_GTK: # yes - found GLib/GTK+ 1.2.x or WITH_GLIB/WITH_GTK set to yes. # HAVE_ESOUND: # yes - either found ESound or WITH_ESOUND set to yes. # HAVE_IMLIB: # yes - either found Imlib or WITH_IMLIB set to yes. # HAVE_GNOME: # yes - either found GNOME or WITH_GNOME set to yes. .if defined(WANT_ESOUND) && !defined(WITHOUT_ESOUND) && !defined(WITHOUT_ALL) .if defined(HAVE_ESOUND) .undef HAVE_ESOUND .endif .if defined(WITH_ESOUND) || defined(WITH_ALL) HAVE_ESOUND= yes .else ESD_CONFIG?= ${LOCALBASE}/bin/esd-config .if exists(${ESD_CONFIG}) HAVE_ESOUND= yes .else pre-everything:: @${ECHO_MSG} @${ECHO_MSG} "If you want to compile with ESound support," @${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_ESOUND=yes\"" @${ECHO_MSG} .endif .endif .endif .if defined(WANT_GLIB) && !defined(WITHOUT_GLIB) && !defined(WITHOUT_ALL) .if defined(HAVE_GLIB) .undef HAVE_GLIB .endif .if defined(WITH_GLIB) || defined(WITH_ALL) HAVE_GLIB= yes .else GLIB_CONFIG?= ${LOCALBASE}/bin/glib12-config .if exists(${GLIB_CONFIG}) HAVE_GLIB= yes .else pre-everything:: @${ECHO_MSG} @${ECHO_MSG} "If you want to compile with GLib support," @${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_GLIB=yes\"" @${ECHO_MSG} .endif .endif .endif .if defined(WANT_GTK) && !defined(WITHOUT_GTK) && !defined(WITHOUT_ALL) .if defined(HAVE_GTK) .undef HAVE_GTK .endif .if defined(WITH_GTK) || defined(WITH_ALL) HAVE_GTK= yes .else GTK_CONFIG?= ${X11BASE}/bin/gtk12-config .if exists(${GTK_CONFIG}) HAVE_GTK= yes .else pre-everything:: @${ECHO_MSG} @${ECHO_MSG} "If you want to compile with GTK+ support," @${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_GTK=yes\"" @${ECHO_MSG} .endif .endif .endif .if defined(WANT_IMLIB) && !defined(WITHOUT_IMLIB) && !defined(WITHOUT_ALL) .if defined(HAVE_IMLIB) .undef HAVE_IMLIB .endif .if defined(WITH_IMLIB) || defined(WITH_ALL) HAVE_IMLIB= yes .else IMLIB_CONFIG?= ${X11BASE}/bin/imlib-config .if exists(${IMLIB_CONFIG}) HAVE_IMLIB= yes .else pre-everything:: @${ECHO_MSG} @${ECHO_MSG} "If you want to compile with Imlib support," @${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_IMLIB=yes\"" @${ECHO_MSG} .endif .endif .endif .if defined(WANT_GNOME) && !defined(WITHOUT_GNOME) && !defined(WITHOUT_ALL) .if defined(HAVE_GNOME) .undef HAVE_GNOME .endif .if defined(WITH_GNOME) || defined (WITH_ALL) HAVE_GNOME= yes .else GNOME_CONFIG?= ${X11BASE}/bin/gnome-config .if exists(${GNOME_CONFIG}) HAVE_GNOME= yes .else pre-everything:: @${ECHO_MSG} @${ECHO_MSG} "If you want to compile with GNOME support," @${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_GNOME=yes\"" @${ECHO_MSG} .endif .endif .endif .endif # End of optional part. .if defined(_POSTMKINCLUDED) # This section contains the USE_ definitions. These also pass any HAVE_ # options through to the build process so that ports can use them for # conditional building of components. Also, if optional support has been # requested, add a packagename suffix, to indicate the change in the port's # behaviour. # USE_ESOUND - Says that the port uses ESound. # USE_GLIB - Says that the port uses the GLib package. # USE_GTK - Says that the port uses the GTK+ toolkit. # USE_IMLIB - Says that the port uses the Imlib library. # USE_GNOMELIBS - Says that the port uses the GNOME libraries. # USE_GNOMECTRL - Says that the port uses the GNOME control center. # USE_GNOME - Says that the port uses the GNOME desktop environment. # These are the only "entry points" into the GNOME distribution that will # be supported. If you need to use a port that is (say) part of # the controlcenter metaport, then simply request USE_GNOMECTRL=YES. # # Any explicit depends on any of the ports that make up the x11/gnome # metaport will be periodically eradicated by marking the port BROKEN. # Please use the guidelines above to help everybody maintain a cohesive # FreeBSD/GNOME environment. # # Unless you're experienced with the GNOME system, we highly recommend # simply using USE_GNOME=yes if you have GNOME related ports you wish # to commit. This will certainly be a *guaranteed* interface that won't # be broken without significant warning. Practically all of your target # audience will already have the x11/gnome metaport installed, so there # will be minimal inconvenience in terms of excessive downloads. # # Ports using GNOME should also have USE_X_PREFIX defined. # (Perhaps we should add it?? XXX: aDe) .if defined(USE_GNOME) USE_GNOMECTRL= yes .endif .if defined(USE_GNOMECTRL) USE_GNOMELIBS= yes .endif .if defined(USE_GNOMELIBS) USE_IMLIB= yes USE_ESOUND= yes .endif .if defined(USE_IMLIB) USE_GTK= yes .endif .if defined(USE_GTK) USE_GLIB= yes .endif .if defined(USE_ESOUND) LIB_DEPENDS+= esd.2:${PORTSDIR}/audio/esound ESD_CONFIG?= ${LOCALBASE}/bin/esd-config CONFIGURE_ENV+= ESD_CONFIG="${ESD_CONFIG}" MAKE_ENV+= ESD_CONFIG="${ESD_CONFIG}" .if defined(HAVE_ESOUND) .if defined(PKGNAMESUFFIX) PKGNAMESUFFIX:= ${PKGNAMESUFFIX}-esound .else PKGNAMESUFFIX= -esound .endif CONFIGURE_ENV+= HAVE_ESOUND=${HAVE_ESOUND} MAKE_ENV+= HAVE_ESOUND=${HAVE_ESOUND} .endif .endif .if defined(USE_GLIB) LIB_DEPENDS+= glib12.3:${PORTSDIR}/devel/glib12 GLIB_CONFIG?= ${LOCALBASE}/bin/glib12-config CONFIGURE_ENV+= GLIB_CONFIG="${GLIB_CONFIG}" MAKE_ENV+= GLIB_CONFIG="${GLIB_CONFIG}" .if defined(HAVE_GLIB) .if defined(PKGNAMESUFFIX) PKGNAMESUFFIX:= ${PKGNAMESUFFIX}-glib .else PKGNAMESUFFIX= -glib .endif CONFIGURE_ENV+= HAVE_GLIB=${HAVE_GLIB} MAKE_ENV+= HAVE_GLIB=${HAVE_GLIB} .endif .endif .if defined(USE_GTK) LIB_DEPENDS+= gtk12.2:${PORTSDIR}/x11-toolkits/gtk12 GTK_CONFIG?= ${X11BASE}/bin/gtk12-config CONFIGURE_ENV+= GTK_CONFIG="${GTK_CONFIG}" MAKE_ENV+= GTK_CONFIG="${GTK_CONFIG}" .if defined(HAVE_GTK) .if defined(PKGNAMESUFFIX) PKGNAMESUFFIX:= ${PKGNAMESUFFIX}-gtk .else PKGNAMESUFFIX= -gtk .endif CONFIGURE_ENV+= HAVE_GTK=${HAVE_GTK} MAKE_ENV+= HAVE_GTK=${HAVE_GTK} .endif .endif .if defined(USE_IMLIB) LIB_DEPENDS+= Imlib.5:${PORTSDIR}/graphics/imlib IMLIB_CONFIG?= ${X11BASE}/bin/imlib-config CONFIGURE_ENV+= IMLIB_CONFIG="${IMLIB_CONFIG}" MAKE_ENV+= IMLIB_CONFIG="${IMLIB_CONFIG}" .if defined(HAVE_IMLIB) .if defined(PKGNAMESUFFIX) PKGNAMESUFFIX:= ${PKGNAMESUFFIX}-imlib .else PKGNAMESUFFIX= -imlib .endif CONFIGURE_ENV+= HAVE_IMLIB=${HAVE_IMLIB} MAKE_ENV+= HAVE_IMLIB=${HAVE_IMLIB} .endif .endif # Ports which optionally depend on GNOME can add '--datadir=${PREFIX}/share' # to CONFIGURE_ARGS before including if they do not wish # to install their data files in /usr/X11R6/share/gnome. Please be aware # that you will need to make non standard patches to get the rest of the # files into the correct places. Specifically, the help files and pixmaps # must still go into /usr/X11R6/share/gnome/help and # /usr/X11R6/share/gnome/pixmaps respectively. %%DATADIR%% will still be # defined for you to use. .if defined(USE_GNOMELIBS) CONFIGURE_ARGS+=--with-gnome=${PREFIX} .if ${CONFIGURE_ARGS:S/--localstatedir=//} == ${CONFIGURE_ARGS:S/ / /g} CONFIGURE_ARGS+=--localstatedir=${PREFIX}/share/gnome .endif .if ${CONFIGURE_ARGS:S/--datadir=//} == ${CONFIGURE_ARGS:S/ / /g} CONFIGURE_ARGS+=--datadir=${PREFIX}/share/gnome .endif LIB_DEPENDS+= gnome.5:${PORTSDIR}/x11/gnomelibs GNOME_CONFIG?= ${X11BASE}/bin/gnome-config CONFIGURE_ENV+= GNOME_CONFIG="${GNOME_CONFIG}" MAKE_ENV+= GNOME_CONFIG="${GNOME_CONFIG}" .if defined(HAVE_GNOME) .if defined(PKGNAMESUFFIX) PKGNAMESUFFIX:= ${PKGNAMESUFFIX}-gnome .else PKGNAMESUFFIX= -gnome .endif CONFIGURE_ENV+= HAVE_GNOME=${HAVE_GNOME} MAKE_ENV+= HAVE_GNOME=${HAVE_GNOME} PLIST_SUB+= GNOME:="" NOGNOME:="@comment " DATADIR="share/gnome" .endif .endif .if defined(USE_GNOMECTRL) BUILD_DEPENDS+= ${X11BASE}/bin/gnomecc:${PORTSDIR}/sysutils/gnomecontrolcenter RUN_DEPENDS+= ${X11BASE}/bin/gnomecc:${PORTSDIR}/sysutils/gnomecontrolcenter .endif .if defined(USE_GNOME) LIB_DEPENDS+= panel_status.5:${PORTSDIR}/x11/gnomecore \ gtkhtml.21:${PORTSDIR}/www/gtkhtml .endif .if defined(WANT_GNOME) && !defined(HAVE_GNOME) PLIST_SUB+= GNOME:="@comment " NOGNOME:="" DATADIR="share" .endif # Start of GNOME_VALIDATE_DEPS_CHAIN part. .if defined(USE_GNOMELIBS) && defined(GNOME_VALIDATE_DEPS_CHAIN) BUILD_DEPENDS+= python:${PORTSDIR}/lang/python CHKDPCHN_CMD?= ${PORTSDIR}/Tools/scripts/chkdepschain.py CHKDPCHN_CACHE= .chkdpchn.cache.${PKGNAME} .if !target(pre-extract) pre-extract:: @${ECHO_MSG} "===> Validating build-time dependency chain for ${PKGNAME}" @${MKDIR} ${WRKDIR} @${CHKDPCHN_CMD} -b -s ${WRKDIR}/${CHKDPCHN_CACHE} .endif .if !target(pre-install) pre-install:: @${ECHO_MSG} "===> Validating run-time dependency chain for ${PKGNAME}" @${CHKDPCHN_CMD} -r -L ${WRKDIR}/${CHKDPCHN_CACHE} .endif .endif # End of GNOME_VALIDATE_DEPS_CHAIN part. .endif # End of use part. .else .include "${PORTSDIR}/Mk/bsd.gnomeng.mk" .endif nome/commit/games/cosmo?h=gstreamer&id=87f4d471fb27b9547c1a0de221b51f4c31684157'>- Welcome X.org 7.2 \o/.flz2007-05-201-1/+1 * - Update MASTER_SITES and fix fetchmnag2006-04-081-2/+3 * - Remove WWW line from pkg-descr, since site doesn't exist anymoregarga2005-12-031-2/+0 * - Add SHA256pav2005-11-251-0/+2 * SIZEify.trevor2004-03-181-0/+2 * - Update MASTER_SITESpav2003-12-271-2/+3 * Reset maintainer on ports owned by the following committers who havekris2003-11-031-1/+1 * Clear moonlight beckons.ade2003-03-072-1/+1 * Add a patch to fix unchecked buffersnakai2002-08-032-1/+79 * Chase the checksum (documentation fixes in Japanese). No PORTREVISION bumpkris2001-03-101-1/+1 * MASTER_SITES update.nakai2000-11-021-2/+1 * Update patch to use ComplexProgramTargetNoMan().nakai2000-10-182-3/+12 * Make this setgid games and remove a world-writable file.kris2000-08-162-4/+13 * update portname/portversion stuff (games commit part 1, a-c)mharo2000-04-141-2/+2 * Fix and updates from KATO Tsuguru.nakai2000-01-223-14/+29