#-*- tab-width: 4; -*- # ex:ts=4 # # $FreeBSD$ # $NetBSD: $ # # bsd.port.mk - 940820 Jordan K. Hubbard. # This file is in the public domain. # # Please view me with 4 column tabs! # This is the master file for the most common elements to all port # Makefile in the ports system. For a more general overview of its # use and importance, see the Porter's Handbook. # There are two different types of "maintainers" in the ports framework. # The maintainer alias of the bsd.port.mk file is listed below in the # FreeBSD_MAINTAINER entry. You should consult them if you have any # questions/suggestions regarding this file. # # DO NOT COMMIT CHANGES TO THIS FILE BY YOURSELF, EVEN IF YOU DID NOT GET # A RESPONSE FROM THE MAINTAINER(S) WITHIN A REASONABLE TIMEFRAME! ALL # UNAUTHORISED CHANGES WILL BE UNCONDITIONALLY REVERTED! FreeBSD_MAINTAINER= portmgr@FreeBSD.org # For each port, the MAINTAINER variable is what you should consult for # contact information on the person(s) to contact if you have questions/ # suggestions about that specific port. By default (if no MAINTAINER # is listed), a port is maintained by the subscribers of the ports@FreeBSD.org # mailing list, and any correspondence should be directed there. # # MAINTAINER - The e-mail address of the contact person for this port. # Default: ports@FreeBSD.org # # These are meta-variables that are automatically set to the system # you are running on. These are provided in case you need to take # different actions for different values. # # ARCH - The architecture of the target machine, such as would be # returned by "uname -p". # OPSYS - Portability clause. This is the operating system the # makefile is being used on. Automatically set to # "FreeBSD," "NetBSD," or "OpenBSD" as appropriate. # OSREL - The release version (numeric) of the operating system. # OSVERSION - The value of __FreeBSD_version. # # This is the beginning of the list of all variables that need to be # defined in a port, listed in order that they should be included # to fit in with existing conventions. (Exception: MAINTAINER actually # should appear after EXTRACT_ONLY and before MASTER_SITE_BACKUP). # # These variables are used to identify your port. # # PORTNAME - Name of software. Mandatory. # PORTVERSION - Version of software. Mandatory when no DISTVERSION is given. # PORTREVISION - Version of port. Optional. Commonly used to indicate # that an update has happened that affects the port # framework itself, but not the distributed software # (e.g., local patches or Makefile changes). # PORTEPOCH - Optional. In certain odd cases, the PORTREVISION logic # can be fooled by ports that appear to go backwards # numerically (e.g. if port-0.3 is newer than port-1998). # In this case, incrementing PORTEPOCH forces the revision. # Default: 0 (no effect). # PKGNAME - Always defined as # ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}. # Do not define this in your Makefile. # PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc. # Optional. # PKGNAMESUFFIX - Suffix to specify compilation options. Optional. # PKGVERSION - Always defined as # ${PORTVERSION}. # Do not define this in your Makefile. # UNIQUENAME - A name for your port that is globally unique. By default, # this is set to ${LATEST_LINK} when LATEST_LINK is set, # and to ${PKGNAMEPREFIX}${PORTNAME} otherwise. # DISTVERSION - Vendor version of the distribution. # Default: ${PORTVERSION} # DISTNAME - Name of port or distribution used in generating # WRKSRC and DISTFILES below. # Default: # ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX} # CATEGORIES - A list of descriptive categories into which this port falls. # Mandatory. # # These variable describe how to fetch files required for building the port. # # DISTFILES - Name(s) of archive file(s) containing distribution. # Set this to an empty string if the port doesn't require it. # Default: ${DISTNAME}${EXTRACT_SUFX} # EXTRACT_SUFX - Suffix for archive names # You never have to set both DISTFILES and EXTRACT_SUFX. # Default: .tar.bz2 if USE_BZIP2 is set, .lzh if USE_LHA is set, # .zip if USE_ZIP is set, .tar.xz if USE_XZ is set, .run if # USE_MAKESELF is set, .tar.gz otherwise). # MASTER_SITES - Primary location(s) for distribution files if not found # locally. See bsd.sites.mk for common choices for # MASTER_SITES. # MASTER_SITE_SUBDIR # - Subdirectory of MASTER_SITES. Will sometimes need to be # set to ${PORTNAME} for (e.g.) MASTER_SITE_SOURCEFORGE. # Only guaranteed to work for choices of ${MASTER_SITES} # defined in bsd.sites.mk. # Default: not set. # PATCHFILES - Name(s) of additional files that contain distribution # patches. Make will look for them at PATCH_SITES (see below). # They will automatically be uncompressed before patching if # the names end with ".gz", ".bz2" or ".Z". # Default: not set. # PATCH_SITES - Primary location(s) for distribution patch files # if not found locally. # DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} and # ${PATCHFILES} will be put in this subdirectory of # ${DISTDIR} (see below). Also they will be fetched in this # subdirectory from FreeBSD mirror sites. # ALLFILES - All of ${DISTFILES} and ${PATCHFILES}. # IGNOREFILES - If set, don't perform checksum checks on these files. # NOFETCHFILES - If set, don't download these files from the ${MASTER_SITES} # or ${MASTER_SITE_BACKUP} (but do from # ${MASTER_SITE_OVERRIDE}) # EXTRACT_ONLY - If set, a subset of ${DISTFILES} you want to # actually extract. # ALWAYS_KEEP_DISTFILES # - If set, the package building cluster will save the distfiles # along with the packages. This may be required to comply with # some licenses, e.g. GPL in some cases. # Default: not set. # # (NOTE: by convention, the MAINTAINER entry (see above) should go here.) # # These variables are typically set in /etc/make.conf to indicate # the user's preferred location to fetch files from. You should # rarely need to set these. # # MASTER_SITE_BACKUP # - Backup location(s) for distribution files and patch # files if not found locally and ${MASTER_SITES}/${PATCH_SITES} # Default: # ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ # MASTER_SITE_OVERRIDE # - If set, override the MASTER_SITES setting with this # value. # MASTER_SITE_FREEBSD # - If set, only use ${MASTER_SITE_BACKUP} for # MASTER_SITES. # CD_MOUNTPTS - List of CDROM mountpoints to look for distfiles under. # This variable supercedes CD_MOUNTPT, which is # obsolete. # # Set these if your port should not be built under certain circumstances. # These are string variables; you should set them to the reason why # they are necessary. # # RESTRICTED - Prevent the distribution of distfiles and packages to # the FTP sites or on CDROM (e.g. forbidden by license # considerations). # NO_CDROM - Packages and distfiles may not go on CDROM (e.g. must # not be re-sold) but can go on FTP sites. # NO_PACKAGE - Port should not be packaged for ftp sites or CDROMs, # but distfiles can be put on ftp sites and CDROMs. # FORBIDDEN - Package build should not be attempted because of # security vulnerabilities. # IGNORE - Package build should be skipped entirely (e.g. # because of serious unfixable problems in the build, # because it cannot be manually fetched, etc). Error # logs will not appear on pointyhat, so this should be # used sparingly. # BROKEN - Port is believed to be broken. Package builds will # still be attempted on the pointyhat package cluster to # test this assumption. # DEPRECATED - Port is deprecated to install. Advisory only. # EXPIRATION_DATE # - If DEPRECATED is set, determines a date when # the port is planed to remove. The date format is # ISO 8601 (YYYY-MM-DD). # # DISABLE_VULNERABILITIES # - If set, do not check if the port is listed in the # vulnerabilities database. # # In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles # or patchfiles have redistribution restrictions, set the following # to the list of such files. # # RESTRICTED_FILES # - List of files that cannot be redistributed. # Default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED # or NO_CDROM is set, empty otherwise. # # These variables are booleans, so you don't need to set them to the reason. # # IS_INTERACTIVE # - Set this if your port needs to interact with the user # during any step in a package build. User can then decide # to skip this port by setting ${BATCH}, or compiling only # the interactive ports by setting ${INTERACTIVE}. # Default: not set. # USE_SUBMAKE - Set this if you want that each of the port's main 6 targets # (extract, patch, configure, build, install and package) to be # executed in a separate make(1) process. Useful when one of # the stages needs to influence make(1) variables of the later # stages using ${WRKDIR}/Makefile.inc generated on the fly. # Default: not set. # # Set these if your port only makes sense to certain architectures. # They are lists containing names for them (e.g., "alpha i386"). # (Defaults: not set.) # # ONLY_FOR_ARCHS # - Only build ports if ${ARCH} matches one of these. # NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these. # ONLY_FOR_ARCHS_REASON # ONLY_FOR_ARCHS_REASON_${ARCH} # - Reason why it's only for ${ONLY_FOR_ARCHS}s # NOT_FOR_ARCHS_REASON # NOT_FOR_ARCHS_REASON_${ARCH} # - Reason why it's not for ${NOT_FOR_ARCHS}s # IA32_BINARY_PORT # - Set this instead of ONLY_FOR_ARCHS if the given port # fetches and installs compiled i386 binaries. # # Dependency checking. Use these if your port requires another port # not in the list below. (Default: empty.) # # EXTRACT_DEPENDS # - A list of "path:dir[:target]" tuples of other ports this # package depends on in the "extract" stage. "path" is # the name of a file if it starts with a slash (/), an # executable otherwise. make will test for the existence # (if it is a full pathname) or search for it in your # $PATH (if it is an executable) and go into "dir" to do # a "make all install" if it's not found. If the third # field ("target") exists, it will be used instead of # ${DEPENDS_TARGET}. The first field also supports a # package name with a version range, in the form package>=1.2 # if a particular version is desired. # PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this # package depends on in the "patch" stage. "path" is the # name of a file if it starts with a slash (/), an # executable otherwise. make will test for the existence # (if it is a full pathname) or search for it in your # $PATH (if it is an executable) and go into "dir" to do # a "make all install" if it's not found. If the third # field ("target") exists, it will be used instead of # ${DEPENDS_TARGET}. The first field also supports a # package name with a version range, in the form package>=1.2 # if a particular version is desired. # FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this # package depends in the "fetch" stage. "path" is the # name of a file if it starts with a slash (/), an # executable otherwise. make will test for the # existence (if it is a full pathname) or search for # it in your $PATH (if it is an executable) and go # into "dir" to do a "make all install" if it's not # found. If the third field ("target") exists, it will # be used instead of ${DEPENDS_TARGET}. The first field # also supports a package name with a version range, in # the form package>=1.2 if a particular version is desired. # BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this # package depends to build (between the "extract" and # "build" stages, inclusive). The test done to # determine the existence of the dependency is the # same as FETCH_DEPENDS. If the third field ("target") # exists, it will be used instead of ${DEPENDS_TARGET}. # RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this # package depends to run. The test done to determine # the existence of the dependency is the same as # FETCH_DEPENDS. This will be checked during the # "install" stage and the name of the dependency will # be put into the package as well. If the third field # ("target") exists, it will be used instead of # ${DEPENDS_TARGET}. The first field also supports a # package name with a version range, in the form package>=1.2 # if a particular version is desired. # LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this # package depends on. "lib" is the name of a shared library. # make will use "ldconfig -r" to search for the library. # lib can contain extended regular expressions. # DEPENDS_TARGET # - The default target to execute when a port is calling a # dependency. # Default: install # # These variables control options about how a port gets built and/or # are shorthand notations for common sets of dependencies. # Use these if your port uses some of the common software packages. By # convention these should be set to 'yes', although they only need to be # defined. Defaults: not set, unless explicitly indicated below. # # Note: the distinction between the USE_* and WANT_* variables, and the # WITH_* and WITHOUT_* variables, are that the former are restricted to # usage inside the ports framework, and the latter are reserved for user- # settable options. (Setting USE_* in /etc/make.conf is always wrong). # # WITH_DEBUG - If set, debugging flags are added to CFLAGS and the # binaries don't get stripped by INSTALL_PROGRAM or # INSTALL_LIB. Besides, individual ports might # add their specific to produce binaries for debugging # purposes. You can override the debug flags that are # passed to the compiler by setting DEBUG_FLAGS. It is # set to "-g" at default. # # USE_BZIP2 - If set, this port tarballs use bzip2, not gzip, for # compression. # USE_LHA - If set, this port distfile uses lha for compression # USE_XZ - If set, this port tarballs use xz (or lzma) # for compression # USE_ZIP - If set, this port distfile uses zip, not tar w/[bg]zip # for compression. # USE_MAKESELF - If set, this port distfile uses makeself, not tar w/[bg]zip # for compression. # USE_DOS2UNIX - If set to "YES", remove the ^M from all files # under ${WRKSRC}. If set to a string, remove in all # files under ${WRKSRC} with one of these names the ^Ms. # DOS2UNIX_REGEX # - Limit the ^M removal to files which name matches # the regular expression. # USE_GCC - If set, this port requires this version of gcc, either in # the system or installed from a port. # USE_CSTD - Override the default C language standard (gnu89, gnu99) # USE_BINUTILS - Use binutils suite from port instead of the version in base. # USE_GMAKE - If set, this port uses gmake. # GMAKE - Set to path of GNU make if not in $PATH. # Default: gmake ## # USE_ICONV - If set, this port uses libiconv. # USE_GETTEXT - The port uses GNU gettext (libintl). # 'build' as a build-time dependency # 'yes' as a library dependency # 'run' as a run-time dependency ## # USE_GHOSTSCRIPT # - If set, this port needs ghostscript to both # build and run. If a number is specified, # the specified version will be used. # The valid value is '7', '8', or '9' in that case. # USE_GHOSTSCRIPT_BUILD # - If set, this port needs ghostscript to build. # USE_GHOSTSCRIPT_RUN # - If set, this port needs ghostscript to run. # GHOSTSCRIPT_PORT # - The port that provides postscript functionality. # Some installations may wish to override the default # to specify a version without X11 and/or localized # versions for their nationality. # Default: print/ghostscript9 # WITH_GHOSTSCRIPT_VER # - If set, the specified version of ghostscript will be # used. The valid value is "7", "8", or "9". Note that # this is for users, not for port maintainers. This # should not be used in Makefile. ## # USE_IMAKE - If set, this port uses imake. # XMKMF - Set to path of `xmkmf' if not in $PATH # Default: xmkmf -a # USE_DISPLAY - If set, this ports requires a (virtual) X11 environment # setup. If the environment variable DISPLAY Is not set, # then an extra build dependency on Xvfb is added. Further, # if PACKAGE_BUILDING is not set, then CONFIGURE_ENV and # MAKE_ENV are extended with a DISPLAY variable. # # USE_FREETYPE - If set, this port uses the freetype print libraries. # USE_GL - A list of Mesa or GL related dependencies needed by the port. # Supported components are: glut, glu, glw, gl and linux. # If set to "yes", this is equivalent to "glu". Note that # glew and glut depend on glu, glw and glu depend on gl. # USE_MOTIF - If set, this port uses a Motif toolkit. Implies USE_XORG+= xpm # NO_OPENMOTIF - If set, this port uses a custom Motif toolkit # instead of Openmotif. # Used only when USE_MOTIF is set. # WANT_LESSTIF - If set, this port uses Lesstif as Motif toolkit. # Used only when USE_MOTIF is set. Implies # NO_OPENMOTIF. ## # USE_SDL - If set, this port uses the sdl libraries. # See bsd.sdl.mk for more information. ## # USE_READLINE - If set, this port uses libreadline. # Legal values are: yes, base, port # yes, base: use base system libreadline on FreeBSD 9 or earlier, # use ports/devel/readline on FreeBSD 10.0+ # port: always use ports/devel/readline ## # USE_OPENAL - If set, this port relies on the OpenAL package. # Legal values are: al, soft, si, alut. # If set to an unknown value, the port is marked broken. # WANT_OPENAL - User-specific OpenAL wishes. # Legal values are: soft, si. The default is soft. ## # USE_OPENSSL - If set, this port relies on the OpenSSL package. ## # USE_OPENLDAP - If set, this port uses the OpenLDAP libraries. # Implies: WANT_OPENLDAP_VER?=24 # WANT_OPENLDAP_VER # - Legal values are: 23, 24 # If set to an unknown value, the port is marked BROKEN. # WANT_OPENLDAP_SASL # - If set, the system should use OpenLDAP libraries # with SASL support. ## # USE_FAM - If set, this port uses the File Alteration Monitor. # # WANT_FAM_SYSTEM # - Legal values are: gamin (default),fam # If set to an unknown value, the port is marked IGNORE. ## # USE_AUTOTOOLS - If set, this port uses various GNU autotools # (libtool, autoconf, autoheader, automake et al.) # See bsd.autotools.mk for more details. ## # USE_SCONS - If set, this port uses the Python-based SCons build system # See bsd.scons.mk for more details. ## # USE_EFL - If set, this port use EFL libraries. # Implies inclusion of bsd.efl.mk. (Also see # that file for more information on USE_EFL_*). # USE_FPC - If set, this port relies on the Free Pascal language. # Implies inclusion of bsd.fpc.mk. (Also see # that file for more information on WANT_FPC_*). # USE_JAVA - If set, this port relies on the Java language. # Implies inclusion of bsd.java.mk. (Also see # that file for more information on USE_JAVA_*). # USE_OCAML - If set, this port relies on the OCaml language. # Implies inclusion of bsd.ocaml.mk. (Also see # that file for more information on USE_OCAML*). # USE_PYTHON - If set, this port relies on the Python language. # Implies inclusion of bsd.python.mk. (Also see # that file for more information on USE_PYTHON_* # and USE_PYDISTUTILS). # USE_R_MOD - If set, this port uses the Comprehensive R Archive Network. # See bsd.cran.mk for more details. # USE_RUBY - If set, this port relies on the Ruby language. # Implies inclusion of bsd.ruby.mk. (Also see # that file for more information on USE_RUBY_*). # USE_GNUSTEP - If set, this port relies on the GNUstep system. # Implies the inclusion of bsd.gnustep.mk. # (Also see that file for more information on # USE_GNUSTEP_*). ## # USE_GECKO - If set, this port uses the Gecko/Mozilla product. # See bsd.gecko.mk for more details. ## # USE_GNOME - A list of the Gnome dependencies the port has (e.g., # glib12, gtk12). Implies that the port needs Gnome. # Implies inclusion of bsd.gnome.mk. See bsd.gnome.mk # or http://www.FreeBSD.org/gnome/docs/porting.html # for more details. ## # USE_LUA - If set, this port uses the Lua library and related # components. See bsd.lua.mk for more details. ## # USE_WX - If set, this port uses the WxWidgets library and related # components. See bsd.wx.mk for more details. ## # USE_KDEBASE_VER - Set to 3 to use the KDE windowing system. # Implies inclusion of bsd.kde.mk. # # USE_KDELIBS_VER - Set to 3 to use the KDE libraries. # Implies inclusion of bsd.kde.mk. # # USE_KDE4 - A list of the KDE4 dependencies the port has (e.g., # kdelibs, kdebase). Implies that the port needs KDE. # Implies inclusion of bsd.kde4.mk. See bsd.kde4.mk # for more details. # # USE_QT_VER - Set to 3 to use the Qt 3 libraries. # Implies inclusion of bsd.kde.mk. # # USE_QT4 - A list of the QT4 dependencies the port has (e.g, # corelib, webkit). Implies that the port needs Qt. # Implies the inclusion of bsd.qt.mk. See bsd.qt.mk # for more details. # # USE_LINUX - Set to yes to say the port needs the default linux base port. # Set to value , if the port needs emulators/linux_base-. # If set to "7", a dependency is registered to emulators/linux_base. # Implies appropriate settings for STRIP and STRIP_CMD. # USE_LINUX_PREFIX # - controls the action of PREFIX (see above). Only use this # if the port is a linux infrastructure port (e.g. contains libs # or a sound server which supports the FreeBSD native one), # use the default or the X11 prefix if it's a leaf port # (e.g. a game or program). # Implies NO_MTREE=yes, and, if USE_LDCONFIG is defined: # - USE_LINUX=yes # - appropriate invocation of the Linux ldconfig # USE_LINUX_RPM - Set to yes to pull in variables and targets useful to Linux # RPM ports. # Implies inclusion of bsd.linux-rpm.mk. # # LINUX_OSRELEASE - Contains the value of compat.linux.osrelease sysctl. # Will be used to distinguish which linux # infrastructure ports should be used. # Valid values: 2.4.2, 2.6.16. # AUTOMATIC_PLIST # - Set to yes to enable automatic packing list generation. # Currently has no effect unless USE_LINUX_RPM is set. # # OVERRIDE_LINUX_BASE_PORT # - This specifies the default linux base to use, for valid # values have a look at the description of USE_LINUX. This is # an user-only variable. Don't use it in any port, it's meant # to be used in make.conf. # # LINUX_BASE_PORT # - This is a read-only variable, it gets set to a value which is # usable in *_DEPENDS (e.g. BUILD_DEPENDS=${LINUX_BASE_PORT}). # It honors USE_LINUX=foo and OVERRIDE_LINUX_BASE_PORT. ## # USE_XORG - Set to a list of X.org module dependencies. # Implies inclusion of bsd.xorg.mk. ## # USE_RC_SUBR - If set, the ports startup/shutdown script uses the common # routines found in /etc/rc.subr. # If this is set to a list of files, these files will be # automatically added to ${SUB_FILES}, some %%VAR%%'s will # automatically be expanded, they will be installed in # ${PREFIX}/etc/rc.d and added to the packing list. # USE_RCORDER - List of rc.d startup scripts to be called early in the boot # process. This acts exactly like USE_RC_SUBR except that # scripts are installed in /etc/rc.d. # Because local rc.d scripts are included in the base rcorder # this option is not needed unless the port installs in the base. ## # USE_APACHE - If set, this port relies on an apache webserver. # # USE_CDRTOOLS - If set, this port depends on sysutils/cdrtools. # # USE_NCURSES - If set, this port relies on the ncurses package. # # USE_PKGCONFIG - Implies that the port uses pkg-config in one way or another: # 'build', 'run', 'both', implying build, # runtime, and both build/run dependencies # # Conflict checking. Use if your port cannot be installed at the same time as # another package. # # CONFLICTS - A list of package name patterns that the port conflicts # with, separated by blanks. The names may include shell # pattern meta-characters "*", "?", "[", "]", and "!". # Example: apache*-1.2* apache*-1.3.[012345] apache-*+ssl_* # # CONFLICTS_BUILD # - Check conflict prior to the build. # # CONFLICTS_INSTALL # - Check conflict prior to the installation stage. # # Various directory definitions and variables to control them. # You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR. # # LOCALBASE - Where non-X11 ports install things. # Default: /usr/local # LINUXBASE - Where Linux ports install things. # Default: /compat/linux # PREFIX - Where *this* port installs its files. # Default: ${LINUXBASE} if USE_LINUX_PREFIX is set, # otherwise ${LOCALBASE} # # IGNORE_PATH_CHECKS # - There are some sanity checks against PREFIX. # You can disable these checks with defining # this variable, but this is not recommended! # Only do this if you really know what you are # doing. These sanity checks are the following: # - PREFIX has to be an absolute path. # - PREFIX can't have a trailing slash. # # MASTERDIR - Where the port finds patches, package files, etc. Define # this is you have two or more ports that share most of the # files. # Default: ${.CURDIR} # PORTSDIR - The root of the ports tree. # Default: /usr/ports # DISTDIR - Where to search for and store copies of original sources # Default: ${PORTSDIR}/distfiles # PACKAGES - A top level directory where all packages go (rather than # going locally to each port). # Default: ${PORTSDIR}/packages # WRKDIRPREFIX - The place to root the temporary working directory # hierarchy. # Default: none # WRKDIR - A temporary working directory that gets *clobbered* on clean # Default: ${WRKDIRPREFIX}${.CURDIR}/work # WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually # unpacks to. # Default: ${WRKDIR}/${DISTNAME} unless NO_WRKSUBDIR is set, # in which case simply ${WRKDIR} # NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}. # PATCHDIR - A directory containing any additional patches you made # to port this software to FreeBSD. # Default: ${MASTERDIR}/files # SCRIPTDIR - A directory containing any auxiliary scripts # Default: ${MASTERDIR}/scripts # FILESDIR - A directory containing any miscellaneous additional files. # Default: ${MASTERDIR}/files # PKGDIR - A directory containing any package creation files. # Default: ${MASTERDIR} # SRC_BASE - The root of the src tree. (Some ports require this to get # kernel sources). Default: /usr/src # UID_FILES - A list of files containing information about registered UIDs. # Note that files have decreasing priority. # GID_FILES - A list of files containing information about registered GIDs. # Note that files have decreasing priority. # # Variables that serve as convenient "aliases" for your *-install targets. # Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin". # # INSTALL_PROGRAM # - A command to install binary executables. (By # default, also strips them, unless ${STRIP} is # overridden to be the empty string). # INSTALL_KLD - As INSTALL_PROGRAM, but without the STRIP. # INSTALL_LIB - As INSTALL_DATA, but also strips the file. # INSTALL_SCRIPT # - A command to install executable scripts. # INSTALL_DATA - A command to install sharable data. # INSTALL_MAN - A command to install manpages. May or not compress, # depending on the value of MANCOMPRESSED (see below). # # Boolean to control whether manpages are installed. # # NO_INSTALL_MANPAGES # - If set, this port doesn't want to install any manpages. # Default: not set, i.e. manpages are installed by default. # # Set the following to specify all manpages that your port installs. # These manpages will be automatically listed in ${PLIST}. Depending # on the setting of NO_MANCOMPRESS, the make rules will compress the # manpages for you. # # MAN - A list of manpages, categorized by section. For # example, if your port has "man/man1/foo.1" and # "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n". # The available sections chars are "123456789LN". # MAN_ # - If your port does not install all man pages for all # languages in MANLANG, language specific pages for # a language can be specified with this. For example, # if the port installs foo.1 in English, Japanese, and # German, bar.1 in English only, and baz.3 in German # only, set # MANLANG= "" de ja # MAN1= foo.1 # MAN1_EN= bar.1 # MAN3_DE= baz.3 # MLINKS - A list of tuples for creating links # for manpages. For example, "MLINKS= a.1 b.1 c.3 d.3" # will do an "ln -sf a.1 b.1" and "ln -sf c.3 d.3" in # appropriate directories. (Use this even if the port # installs its own manpage links so they will show up # correctly in ${PLIST}.) # MANPREFIX - The directory prefix for ${MAN} and ${MLINKS}. # Default: ${PREFIX} # MANPREFIX # - If manual pages of some sections install in different # locations than others, use these. # Default: ${MANPREFIX} # MANCOMPRESSED - This variable can take values "yes", "no" or # "maybe". "yes" means manpages are installed # compressed; "no" means they are not; "maybe" means # it changes depending on the value of NO_MANCOMPRESS. # Default: "yes" if USE_IMAKE is set and NO_INSTALL_MANPAGES # is not set, and "no" otherwise. # # Set the following to specify all .info files your port installs. # # INFO - A list of .info files (omitting the trailing ".info"); # only one entry per document! These files are listed in # the path relative to ${INFO_PATH}. # INFO_PATH - Path, where all .info files will be installed by your # port, relative to ${PREFIX} # Default: "share/info" if ${PREFIX} is equal to /usr # and "info" otherwise. # # Set the following to specify all documentation your port installs into # ${DOCSDIR} # # PORTDOCS - A list of files and directories relative to DOCSDIR. # Shell glob patterns can be used, directories include # the entire subtree of contained files and directories. # Should not be set when no documentation files are # installed. # Useful for dynamically generated documentation. # # Set the following to specify all documentation your port installs into # ${EXAMPLESDIR} # # PORTEXAMPLES - A list of files and directories relative to EXAMPLESDIR. # Shell glob patterns can be used, directories include # the entire subtree of contained files and directories. # Should not be set when no examples files are # installed. # Useful for dynamically generated examples. # # Set the following to specify all files and directories your port installs into # ${DATADIR} # # PORTDATA - A list of files and directories relative to DATADIR. # Shell glob patterns can be used, directories include # the entire subtree of contained files and directories. # Should not be set when no data files are # installed. # Useful for dynamically generated data files. # # Default targets and their behaviors: # # fetch - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this # port. # fetch-list - Show list of commands to retrieve missing ${DISTFILES} and # ${PATCHFILES} for this port. # fetch-recursive # - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this # port and dependencies. # fetch-recursive-list # - Show list of commands to retrieve missing ${DISTFILES} and # ${PATCHFILES} for this port and dependencies. # fetch-required # - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this # port and dependencies. # fetch-required-list # - Show list of commands to retrieve missing ${DISTFILES} and # ${PATCHFILES} for this port and dependencies. # fetch-url-list # - Show list of URLS to retrieve missing ${DISTFILES} and # ${PATCHFILES} for this port. # fetch-urlall-list # - Show list of URLS to retrieve ${DISTFILES} and # ${PATCHFILES} for this port. # # all-depends-list # - Show all directories which are dependencies # for this port. # build-depends-list # - Show all directories which are build-dependencies # for this port. # package-depends-list # - Show all directories which are package-dependencies # for this port. This is based upon the dependency # tree as recorded in the Makefiles of the ports # collection, not as recorded in the currently # installed ports. # actual-package-depends # - Like package-depends-list but with the difference # that the dependencies of the currently installed # ports are used instead of the dependencies as # recorded in the ports collection. # run-depends-list # - Show all directories which are run-dependencies # for this port. # # extract - Unpacks ${DISTFILES} into ${WRKDIR}. # patch - Apply any provided patches to the source. # configure - Runs either GNU configure, one or more local configure # scripts or nothing, depending on what's available. # build - Actually compile the sources. # install - Install the results of a build. # reinstall - Install the results of a build, ignoring "already installed" # flag. # deinstall - Remove the installation. # deinstall-all - Remove all installations with the same PKGORIGIN. # package - Create a package from an _installed_ port. # package-recursive # - Create a package for a port and _all_ of its dependencies. # describe - Try to generate a one-line description for each port for # use in INDEX files and the like. # checkpatch - Do a "patch -C" instead of a "patch". Note that it may # give incorrect results if multiple patches deal with # the same file. # checksum - Use distinfo to ensure that your distfiles are valid. # checksum-recursive # - Run checksum in this port and all dependencies. # makesum - Generate distinfo (only do this for your own ports!). # clean - Remove ${WRKDIR} and other temporary files used for building. # clean-depends - Do a "make clean" for all dependencies. # config - Configure options for this port (using ${DIALOG}). # Automatically run prior to extract, patch, configure, build, # install, and package. # config-recursive # - Configure options for this port for a port and all its # dependencies. # showconfig - Display options config for this port. # showconfig-recursive # - Display options config for this port and all its # dependencies. # rmconfig - Remove the options config for this port. # rmconfig-recursive # - Remove the options config for this port and all its # dependencies. # # Default sequence for "all" is: # # check-sanity fetch checksum extract patch configure build # # Please read the comments in the targets section below; you # should be able to use the pre-* or post-* targets/scripts # (which are available for every stage except checksum) or # override the do-* targets to do pretty much anything you want. # # NEVER override the "regular" targets unless you want to open # a major can of worms. # # Set these variables if your port doesn't need some of the steps. # Note that there are no NO_PATCH or NO_CONFIGURE variables because # those steps are empty by default. NO_EXTRACT is not allowed anymore # since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user # variable and is not to be set in a port's Makefile. See above for NO_PACKAGE. # # NO_BUILD - Use a dummy (do-nothing) build target. # NO_INSTALL - Use a dummy (do-nothing) install target. # # Here are some variables used in various stages. # # For options see bsd.options.mk # # For fetch: # # FETCH_BINARY - Path to ftp/http fetch command if not in $PATH. # Default: "/usr/bin/fetch" # FETCH_ARGS - Arguments to ftp/http fetch command. # Default: "-AFpr" # FETCH_CMD - ftp/http fetch command. # Default: ${FETCH_BINARY} ${FETCH_ARGS} # FETCH_BEFORE_ARGS # - Arguments to ${FETCH_CMD} before filename. # Default: none # FETCH_AFTER_ARGS # - Arguments to ${FETCH_CMD} following filename. # Default: none # FETCH_ENV - Environment to pass to ${FETCH_CMD}. # Default: none # FETCH_REGET - Times to retry fetching of files on checksum errors. # Default: 1 # CLEAN_FETCH_ENV # - Disable package dependency in fetch target for mass # fetching. User settable. # # For extract: # # EXTRACT_CMD - Command for extracting archive: "bzip2" if USE_BZIP2 # is set, "unzip" if USE_ZIP is set, "unmakeself" if # USE_MAKESELF if set, "gzip" otherwise. # EXTRACT_BEFORE_ARGS # - Arguments to ${EXTRACT_CMD} before filename. # Default: "-dc" # EXTRACT_AFTER_ARGS # - Arguments to ${EXTRACT_CMD} following filename. # default: "| tar -xf -" # EXTRACT_PRESERVE_OWNERSHIP # - Normally, when run as "root", the extract stage will # change the owner and group of all files under ${WRKDIR} # to 0:0. Set this variable if you want to turn off this # feature. # For patch: # # EXTRA_PATCHES - Define this variable if you have patches not in # ${PATCHDIR}. This usually happens when you need to # do some pre-processing before some distribution # patches can be applied. In that case, fetch them as # extra distfiles, put the processed results in # ${WRKDIR}, then point EXTRA_PATCHES to them. # The patches specified by this variable will be # applied after the normal distribution patches but # before those in ${PATCHDIR}. # PATCH_WRKSRC - Directory to apply patches in. # Default: ${WRKSRC} # # For configure: # # HAS_CONFIGURE - If set, this port has its own configure script. The # configure stage will not do anything if this is not set. # GNU_CONFIGURE - If set, you are using GNU configure (optional). Implies # HAS_CONFIGURE. # CONFIGURE_WRKSRC # - Directory to run configure in. # Default: ${WRKSRC} # CONFIGURE_SCRIPT # - Name of configure script, relative to ${CONFIGURE_WRKSRC}. # Default: "Makefile.PL" if PERL_CONFIGURE is set, # "configure" otherwise. # CONFIGURE_TARGET # - The name of target to call when GNU_CONFIGURE is # defined. # Default: ${ARCH}-portbld-freebsd${OSREL} # GNU_CONFIGURE_PREFIX # - The directory passed as prefix to the configure script if # GNU_CONFIGURE is set. # Default: ${PREFIX} # CONFIGURE_ARGS # - Pass these args to configure if ${HAS_CONFIGURE} is set. # Default: "--prefix=${GNU_CONFIGURE_PREFIX} --infodir=${PREFIX}/${INFO_PATH} # --mandir=${MANPREFIX}/man --build=${CONFIGURE_TARGET}" if # GNU_CONFIGURE is set, "CC=${CC} CFLAGS=${CFLAGS} # PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib # INSTALLARCHLIB=${PREFIX}/lib" if PERL_CONFIGURE is set, # empty otherwise. # CONFIGURE_ENV - Pass these env (shell-like) to configure if # ${HAS_CONFIGURE} is set. # CONFIGURE_LOG - The name of configure log file. It will be printed to # the screen if configure fails. # Default: config.log # CONFIGURE_FAIL_MESSAGE # - A message displayed to users when configure # fails (note: this assumes the do-configure # target has not been overwritten). This message # will be passed through /usr/bin/fmt before # being shown to the user. # # WITHOUT_FBSD10_FIX Disable FreeBSD 10.0 autotools workaround. # # For build and install: # # MAKEFILE - Name of the makefile. # Default: Makefile # ALL_TARGET - Default target for sub-make in build stage. # Default: all # BUILD_WRKSRC - Directory to do build in (default: ${WRKSRC}). # MAKE_ENV - Additional environment vars passed to sub-make in build # and install stages. # Default: see below # MAKE_ARGS - Any extra arguments to sub-make in build and install stages. # Default: none ## # MAKE_JOBS_SAFE # - This port can safely be built on multiple cpus in parallel. # The make will be invoked with -jX parameter where X equals # number of cores present in the system. # MAKE_JOBS_UNSAFE # - Disallow multiple jobs even when user set a global override. # To be used with known bad ports. # DISABLE_MAKE_JOBS # - Set to disable the multiple jobs feature. User settable. # FORCE_MAKE_JOBS # - Force all ports to be built with multiple jobs, except ports # that are explicitly marked MAKE_JOBS_UNSAFE. User settable. # MAKE_JOBS_NUMBER # - Override the number of make jobs to be used. User settable. ## cacche # # WITH_CCACHE_BUILD # - Enable CCACHE support (devel/ccache). User settable. # NO_CCACHE # - Disable CCACHE support for example for certain ports if # CCACHE is enabled. User settable. # # For install: # # INSTALL_TARGET # - Default target for sub-make in install stage. # Default: install # INSTALL_WRKSRC # - Directory to install from # Default: ${WRKSRC} # NO_MTREE - If set, will not invoke mtree from bsd.port.mk from # the "install" target. # MTREE_FILE - The name of the mtree file. # Default: ${PORTSDIR}/Templates/BSD.local.dist or # /etc/mtree/BSD.usr.dist if ${PREFIX} == "/usr". # PLIST_DIRS - Directories to be added to packing list # PLIST_DIRSTRY - Directories to be added to packing list and try to remove them. # PLIST_FILES - Files and symbolic links to be added to packing list # # PLIST - Name of the `packing list' file. # Change this to ${WRKDIR}/PLIST or something if you # need to write to it. (It is not a good idea for a port # to write to any file outside ${WRKDIR} during a normal # build.) # Default: ${PKGDIR}/pkg-plist # TMPPLIST - Name of the `packing list' file after processing # Default: ${WRKDIR}/.PLIST.mktmp # PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST} # Default: see below # # SUB_FILES - Files that should be passed through sed and redirected to # ${WRKDIR}. # - For each file specified in SUB_FILES, there must be a # corresponding file in ${FILESDIR} whose suffix is ".in". For # instance, if the Makefile specifies "SUB_FILES= pkg-message" # then there must be a file called pkg-message.in in # ${FILESDIR}. # - The substitution process is the same as PLIST_FILES, as # described below except that any line beginning with @comment # is deleted. # SUB_LIST - List of "variable=value" pair for substitution in ${SUB_FILES} # Some pairs are added by default: eg. PREFIX=${PREFIX} # # USE_LDCONFIG - If set to "yes", this adds ${PREFIX}/lib to the list of # directories to be searched for shared libraries. # Otherwise, this is a list of directories to be added to that # list. The directory names are written to # ${PREFIX}/libdata/ldconfig/${UNIQUENAME} which is then # used by the ldconfig startup script. # This mechanism replaces ldconfig scripts installed by some # ports, often under such names as 000.${UNQUENAME}.sh. # If USE_LINUX_PREFIX is defined, the Linux version of # ldconfig will be used instead of the native FreeBSD # version, and the directory list given will be ignored. # USE_LDCONFIG32 # - Same as USE_LDCONFIG but the target file is # ${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead. # Note: that should only be used on 64-bit architectures. # NO_LDCONFIG_MTREE # - Denotes whether the libdata/ldconfig directory is part of # the mtree on a given OSVERSION system. If it is not, we # create the directory, pull in the ldconfig_compat port, # and clean up on de-installation. NOTE: this variable is # internal to bsd.port.mk and must not be set in your Makefile. # # DOCSDIR - Name of the directory to install the packages docs in. # Default: ${PREFIX}/share/doc/${PORTNAME} # DOCSDIR_REL - The DOCSDIR relative to ${PREFIX} # EXAMPLESDIR - Name of the directory to install the packages examples in. # Default: ${PREFIX}/share/examples/${PORTNAME} # EXAMPLESDIR_REL # - The EXAMPLESDIR relative to ${PREFIX} # DATADIR - Name of the directory to install the packages shared data in. # Default: ${PREFIX}/share/${PORTNAME} # DATADIR_REL - The DATADIR relative to ${PREFIX} # # WWWDIR - Name of the directory to install the packages www data in. # Default: ${PREFIX}/www/${PORTNAME} # WWWDIR_REL - The WWWDIR relative to ${PREFIX} # # USERS - List of users to create at install time. Each login must # have a corresponding entry in ${UID_FILES}. # GROUPS - List of groups to create at install time. Each group must # have a corresponding entry in ${GID_FILES}. # # DESKTOPDIR - Name of the directory to install ${DESKTOP_ENTRIES} in. # Default: ${PREFIX}/share/applications # DESKTOP_ENTRIES # - List of desktop entry files to generate and install in # ${DESKTOPDIR}. The format is # "Name" "Comment" "Icon" "Exec" "Categories" StartupNotify # Rules: # * Only add desktop entries for applications which do not # require a terminal (ie. X applications). # * If the upstream distribution already installs .desktop # files, you do not need to use this. # * If you require a more elaborate .desktop file than this # variable permits, write it yourself and install it # in ${DESKTOPDIR}. # Notes: # * Comment, Icon and StartupNotify may be empty # strings (""). Categories may be an empty string in some # cases (see below). The other fields are mandatory. # * If Comment is an empty string, port ${COMMENT} will be # used. # * If set, Icon must be either absolute path (usually # ${PREFIX}/share/pixmaps/${PORTNAME}.png) or icon name # without extension if installed icons follow Icon Theme # Specification. # * If Categories is an empty string, bsd.port.mk will try # to deduce a default value using the CATEGORIES variable. # If the deduction fails, you will have to set Categories # manually. You should check the generated value using # "make desktop-categories", and override it if necessary. # * Exec will also be used to name the .desktop file. # * StartupNotify may be true, false or empty (see Desktop # Entry Specification for details). # * The files will be automatically added to ${PLIST}. # Example: # "X Window Information" \ # "Get information about X windows" \ # "${PREFIX}/share/pixmaps/wininfo.png" \ # "${PREFIX}/bin/wininfo" \ # "System;" \ # "" # See http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html # for an explanation of the fields. If you need to create more # than one file, just chain them into a single variable. # # Note that the install target will automatically add manpages (see # above) and also substitute special sequences of characters (delimited # by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For # instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of # "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL. # ${TMPPLIST} is generated before the do-install stage. If you are # generating the packing list on-the-fly, make sure it's generated before # do-install is called! # # For package: # # NO_LATEST_LINK # - Do not install the "Latest" link for package. Define this # if this port is a beta version of another stable port # which is also in the tree. # LATEST_LINK - Install the "Latest" link for the package as ___. Define # this if the "Latest" link name will be incorrectly determined. # # This is used in all stages: # # SCRIPTS_ENV - Additional environment vars passed to scripts in # ${SCRIPTDIR} executed by bsd.port.mk. # Default: see below # # Finally, variables to change if you want a special behavior. These # are for debugging purposes. Don't set them in your Makefile. # # ECHO_MSG - Used to print all the '===>' style prompts - override this # to turn them off. # Default: ${ECHO_CMD} # PATCH_DEBUG - If set, print out more information about the patches as # it attempts to apply them. # PKG_DBDIR - Where package installation is recorded; this directory # must not contain anything else. # Default: /var/db/pkg # PORT_DBDIR - Where port configuration options are recorded. # Default: /var/db/ports # NO_PKG_REGISTER # - Don't register a port installation as a package. # FORCE_PKG_REGISTER # - If set, it will overwrite any existing package # registration information in ${PKG_DBDIR}/${PKGNAME}. # NO_DEPENDS - Don't verify build of dependencies. # CHECKSUM_ALGORITHMS # - Different checksum algorithms to check for verifying the # integrity of the distfiles. The absence of the algorithm # in distinfo doesn't make it fail. # Default: sha256 # NO_CHECKSUM - Don't verify the checksum. Typically used when # when you noticed the distfile you just fetched has # a different checksum and you intend to verify if # the port still works with it. # USE_PACKAGE_DEPENDS # - Install dependencies from existing packages instead # of building the port from scratch. # INSTALL_AS_USER # - Define this to install as the current user, intended # for systems where you have no root access. # DISABLE_SIZE - Do not check the size of a distfile even if the SIZE field # has been specified in distinfo. This is useful # when using an alternate FETCH_CMD. # # End of the list of all variables that need to be defined in a port. # Most port authors should not need to understand anything after this point. # # These need to be absolute since we don't know how deep in the ports # tree we are and thus can't go relative. They can, of course, be overridden # by individual Makefiles or local system make configuration. PORTSDIR?= /usr/ports LOCALBASE?= /usr/local LINUXBASE?= /compat/linux DISTDIR?= ${PORTSDIR}/distfiles _DISTDIR?= ${DISTDIR}/${DIST_SUBDIR} INDEXDIR?= ${PORTSDIR} SRC_BASE?= /usr/src USESDIR?= ${PORTSDIR}/Mk/Uses .include "${PORTSDIR}/Mk/bsd.commands.mk" # # DESTDIR section to start a chrooted process if invoked with DESTDIR set # .if defined(DESTDIR) && !empty(DESTDIR) && !defined(CHROOTED) && \ !defined(BEFOREPORTMK) && !defined(INOPTIONSMK) .include "${PORTSDIR}/Mk/bsd.destdir.mk" .else # Look for ${PATCH_WRKSRC}/.../*.orig files, and (re-)create # ${FILEDIR}/patch-* files from them. .if !target(makepatch) makepatch: @${MKDIR} ${FILESDIR} @(cd ${PATCH_WRKSRC}; \ for i in `find . -type f -name '*.orig'`; do \ ORG=$$i; \ NEW=$${i%.orig}; \ OUT=${FILESDIR}`${ECHO} $${NEW} | \ ${SED} -e 's|/|__|g' \ -e 's|^\.__|/patch-|'`; \ ${ECHO} ${DIFF} -ud $${ORG} $${NEW} '>' $${OUT}; \ ${DIFF} -ud $${ORG} $${NEW} > $${OUT} || ${TRUE}; \ done \ ) .endif # Start of options section .if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) ) # Get the default maintainer MAINTAINER?= ports@FreeBSD.org # Get the architecture .if !defined(ARCH) ARCH!= ${UNAME} -p .endif # Get the operating system type .if !defined(OPSYS) OPSYS!= ${UNAME} -s .endif # Get the operating system revision .if !defined(OSREL) OSREL!= ${UNAME} -r | ${SED} -e 's/[-(].*//' .endif # Get __FreeBSD_version .if !defined(OSVERSION) .if exists(/usr/include/sys/param.h) OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h .elif exists(${SRC_BASE}/sys/sys/param.h) OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < ${SRC_BASE}/sys/sys/param.h .else OSVERSION!= ${SYSCTL} -n kern.osreldate .endif .endif .if ${OSVERSION} >= 1000017 .if !defined(WITHOUT_PKGNG) WITH_PKGNG= yes .else .undef WITH_PKGNG .endif .endif # Only define tools here (for transition period with between pkg tools) .include "${PORTSDIR}/Mk/bsd.commands.mk" MASTERDIR?= ${.CURDIR} .if ${MASTERDIR} != ${.CURDIR} SLAVE_PORT?= yes MASTER_PORT?=${MASTERDIR:C/[^\/]+\/\.\.\///:C/[^\/]+\/\.\.\///:C/^.*\/([^\/]+\/[^\/]+)$/\\1/} .else SLAVE_PORT?= no MASTER_PORT?= .endif # If they exist, include Makefile.inc, then architecture/operating # system specific Makefiles, then local Makefile.local. .if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc) .include "${.CURDIR}/../Makefile.inc" USE_SUBMAKE= yes .endif .if exists(${MASTERDIR}/../Makefile.inc) .include "${MASTERDIR}/../Makefile.inc" USE_SUBMAKE= yes .endif .if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS}) .include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}" USE_SUBMAKE= yes .elif exists(${MASTERDIR}/Makefile.${OPSYS}) .include "${MASTERDIR}/Makefile.${OPSYS}" USE_SUBMAKE= yes .elif exists(${MASTERDIR}/Makefile.${ARCH}) .include "${MASTERDIR}/Makefile.${ARCH}" USE_SUBMAKE= yes .endif .if exists(${MASTERDIR}/Makefile.local) .include "${MASTERDIR}/Makefile.local" USE_SUBMAKE= yes .endif # where 'make config' records user configuration options PORT_DBDIR?= /var/db/ports UID_FILES?= ${PORTSDIR}/UIDs GID_FILES?= ${PORTSDIR}/GIDs UID_OFFSET?= 0 GID_OFFSET?= 0 # predefined accounts from src/etc/master.passwd # alpha numeric sort order USERS_BLACKLIST= _dhcp _pflogd auditdistd bin bind daemon games hast kmem mailnull man news nobody operator pop proxy root smmsp sshd toor tty uucp www LDCONFIG_DIR= libdata/ldconfig LDCONFIG32_DIR= libdata/ldconfig32 .if defined(LATEST_LINK) UNIQUENAME?= ${LATEST_LINK} .else UNIQUENAME?= ${PKGNAMEPREFIX}${PORTNAME} .endif .endif DOS2UNIX_REGEX?= .* # At least KDE needs TMPDIR for the package building, # so we're setting it to the known default value. .if defined(PACKAGE_BUILDING) TMPDIR?= /tmp .endif # defined(PACKAGE_BUILDING) # Respect TMPDIR passed via make.conf or similar and pass it down # to configure and make. .if defined(TMPDIR) MAKE_ENV+= TMPDIR="${TMPDIR}" CONFIGURE_ENV+= TMPDIR="${TMPDIR}" .endif # defined(TMPDIR) # Reset value from bsd.own.mk. .if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG) STRIP= #none .endif .include "${PORTSDIR}/Mk/bsd.options.mk" # Start of pre-makefile section. .if !defined(AFTERPORTMK) && !defined(INOPTIONSMK) .if defined(_PREMKINCLUDED) check-makefile:: @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.pre].mk twice" @${FALSE} .endif _PREMKINCLUDED= yes .if defined(PORTVERSION) .if ${PORTVERSION:M*[-_,]*}x != x IGNORE= PORTVERSION ${PORTVERSION} may not contain '-' '_' or ',' .endif DISTVERSION?= ${PORTVERSION:S/:/::/g} .elif defined(DISTVERSION) PORTVERSION= ${DISTVERSION:L:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g} .endif PORTREVISION?= 0 .if ${PORTREVISION} != 0 _SUF1= _${PORTREVISION} .endif PORTEPOCH?= 0 .if ${PORTEPOCH} != 0 _SUF2= ,${PORTEPOCH} .endif PKGVERSION= ${PORTVERSION:C/[-_,]/./g}${_SUF1}${_SUF2} PKGNAME= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION} DISTNAME?= ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION:C/:(.)/\1/g}${DISTVERSIONSUFFIX} INDEXFILE?= INDEX-${OSVERSION:C/([0-9]*)[0-9]{5}/\1/} DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME} EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME} DATADIR?= ${PREFIX}/share/${PORTNAME} WWWDIR?= ${PREFIX}/www/${PORTNAME} ETCDIR?= ${PREFIX}/etc/${PORTNAME} .if defined(USE_LINUX_RPM) .include "${PORTSDIR}/Mk/bsd.linux-rpm.mk" .endif .if defined(USE_LINUX_APPS) .include "${PORTSDIR}/Mk/bsd.linux-apps.mk" .endif .if defined(USE_XORG) || defined(XORG_CAT) .include "${PORTSDIR}/Mk/bsd.xorg.mk" .endif .if defined(USE_BZIP2) EXTRACT_SUFX?= .tar.bz2 .elif defined(USE_LHA) EXTRACT_SUFX?= .lzh .elif defined(USE_ZIP) EXTRACT_SUFX?= .zip .elif defined(USE_XZ) EXTRACT_SUFX?= .tar.xz .elif defined(USE_MAKESELF) EXTRACT_SUFX?= .run .else EXTRACT_SUFX?= .tar.gz .endif PACKAGES?= ${PORTSDIR}/packages TEMPLATES?= ${PORTSDIR}/Templates PATCHDIR?= ${MASTERDIR}/files FILESDIR?= ${MASTERDIR}/files SCRIPTDIR?= ${MASTERDIR}/scripts PKGDIR?= ${MASTERDIR} .if defined(USE_LINUX_PREFIX) PREFIX?= ${LINUXBASE} NO_MTREE= yes .else PREFIX?= ${LOCALBASE} .endif .if defined(USE_LINUX_PREFIX) LDCONFIG_CMD?= ${LINUXBASE}/sbin/ldconfig -r ${LINUXBASE} .endif PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg .if defined(USE_LOCAL_MK) .include "${PORTSDIR}/Mk/bsd.local.mk" .endif .if defined(USE_OPENSSL) .include "${PORTSDIR}/Mk/bsd.openssl.mk" .endif .if defined(USE_EMACS) .include "${PORTSDIR}/Mk/bsd.emacs.mk" .endif .if defined(USE_GNUSTEP) .include "${PORTSDIR}/Mk/bsd.gnustep.mk" .endif .include "${PORTSDIR}/Mk/bsd.perl.mk" .if defined(USE_PHP) .include "${PORTSDIR}/Mk/bsd.php.mk" .endif .if defined(USE_PYTHON) || defined(USE_PYTHON_BUILD) || defined(USE_PYTHON_RUN) .include "${PORTSDIR}/Mk/bsd.python.mk" .endif .if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART) .include "${PORTSDIR}/Mk/bsd.efl.mk" .endif .if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL) .include "${PORTSDIR}/Mk/bsd.fpc.mk" .endif .if defined(USE_JAVA) .include "${PORTSDIR}/Mk/bsd.java.mk" .endif .if defined(USE_R_MOD) .include "${PORTSDIR}/Mk/bsd.cran.mk" .endif .if defined(USE_RUBY) || defined(USE_LIBRUBY) .include "${PORTSDIR}/Mk/bsd.ruby.mk" .endif .if defined(USE_OCAML) .include "${PORTSDIR}/Mk/bsd.ocaml.mk" .endif .if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TCL_RUN) || defined(USE_TCL_WRAPPER) || defined(USE_TK) || defined(USE_TK_BUILD) || defined(USE_TK_RUN) || defined(USE_TK_WRAPPER) .include "${PORTSDIR}/Mk/bsd.tcl.mk" .endif .if defined(USE_APACHE) || defined(USE_APACHE_BUILD) || defined(USE_APACHE_RUN) .include "${PORTSDIR}/Mk/bsd.apache.mk" .endif .if (defined(USE_QT_VER) && ${USE_QT_VER:L} == 3) || defined(USE_KDELIBS_VER) || defined(USE_KDEBASE_VER) .include "${PORTSDIR}/Mk/bsd.kde.mk" .endif .if defined(USE_QT4) .include "${PORTSDIR}/Mk/bsd.qt.mk" .endif .if defined(USE_DRUPAL) .include "${PORTSDIR}/Mk/bsd.drupal.mk" .endif .if defined(WANT_GECKO) || defined(USE_GECKO) || defined(USE_FIREFOX) || defined(USE_FIREFOX_BUILD) || defined(USE_SEAMONKEY) || defined(USE_SEAMONKEY_BUILD) || defined(USE_THUNDERBIRD) || defined(USE_THUNDERBIRD_BUILD) .include "${PORTSDIR}/Mk/bsd.gecko.mk" .endif .if defined(WANT_GNOME) || defined(USE_GNOME) || defined(INSTALLS_ICONS) .include "${PORTSDIR}/Mk/bsd.gnome.mk" .endif .if defined(WANT_LUA) || defined(USE_LUA) || defined(USE_LUA_NOT) .include "${PORTSDIR}/Mk/bsd.lua.mk" .endif .if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT) .include "${PORTSDIR}/Mk/bsd.wx.mk" .endif .if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER1) .include "${PORTSDIR}/Mk/bsd.gstreamer.mk" .endif .if defined(USE_SDL) || defined(WANT_SDL) .include "${PORTSDIR}/Mk/bsd.sdl.mk" .endif .if defined(USE_XFCE) .include "${PORTSDIR}/Mk/bsd.xfce.mk" .endif .if defined(USE_KDE4) || defined(KDE4_BUILDENV) .include "${PORTSDIR}/Mk/bsd.kde4.mk" .endif .if defined(USE_NCURSES) .include "${PORTSDIR}/Mk/bsd.ncurses.mk" .endif .include "${PORTSDIR}/Mk/bsd.pbi.mk" .if defined(USE_CMAKE) . if defined(CMAKE_OUTSOURCE) USES+= cmake:outsource . else USES+= cmake . endif .endif # Loading features .for f in ${USES} _f=${f:C/\:.*//g} .if ${_f} != ${f} ${_f}_ARGS:= ${f:C/^[^\:]*\://g} .endif .include "${USESDIR}/${_f}.mk" .endfor # You can force skipping these test by defining IGNORE_PATH_CHECKS .if !defined(IGNORE_PATH_CHECKS) .if ! ${PREFIX:M/*} .BEGIN: @${ECHO_MSG} "PREFIX must be defined as an absolute path so that when 'make'" @${ECHO_MSG} "is invoked in the work area PREFIX points to the right place." @${FALSE} .endif .endif # Location of mounted CDROM(s) to search for files CD_MOUNTPTS?= /cdrom ${CD_MOUNTPT} # Owner and group of the WWW user WWWOWN?= www WWWGRP?= www .endif # End of pre-makefile section. # Start of post-makefile section. .if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK) .if defined(_POSTMKINCLUDED) check-makefile:: @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.post].mk twice" @${FALSE} .endif _POSTMKINCLUDED= yes WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work .if !defined(IGNORE_MASTER_SITE_GITHUB) && defined(USE_GITHUB) WRKSRC?= ${WRKDIR}/${GH_ACCOUNT}-${GH_PROJECT}-${GH_COMMIT} .endif .if defined(NO_WRKSUBDIR) WRKSRC?= ${WRKDIR} .else WRKSRC?= ${WRKDIR}/${DISTNAME} .endif PATCH_WRKSRC?= ${WRKSRC} CONFIGURE_WRKSRC?= ${WRKSRC} BUILD_WRKSRC?= ${WRKSRC} INSTALL_WRKSRC?=${WRKSRC} PLIST_SUB+= OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE} SUB_LIST+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} \ DATADIR=${DATADIR} DOCSDIR=${DOCSDIR} EXAMPLESDIR=${EXAMPLESDIR} \ WWWDIR=${WWWDIR} ETCDIR=${ETCDIR} PLIST_REINPLACE+= dirrmtry stopdaemon rmtry PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir "%D/\1" 2>/dev/null || true! PLIST_REINPLACE_RMTRY=s!^@rmtry \(.*\)!@unexec rm -f %D/\1 2>/dev/null || true! PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1 forcestop 2>/dev/null || true! # kludge to strip trailing whitespace from CFLAGS; # sub-configure will not # survive double space CFLAGS:= ${CFLAGS:C/ $//} .if defined(WITHOUT_CPU_CFLAGS) .if defined(_CPUCFLAGS) .if !empty(_CPUCFLAGS) CFLAGS:= ${CFLAGS:C/${_CPUCFLAGS}//} .endif .endif .endif .if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG) STRIP_CMD= ${TRUE} DEBUG_FLAGS?= -g CFLAGS:= ${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS} .endif .if defined(NOPORTDOCS) PLIST_SUB+= PORTDOCS="@comment " .else PLIST_SUB+= PORTDOCS="" .endif .if defined(NOPORTEXAMPLES) PLIST_SUB+= PORTEXAMPLES="@comment " .else PLIST_SUB+= PORTEXAMPLES="" .endif .if defined(NOPORTDATA) PLIST_SUB+= PORTDATA="@comment " .else PLIST_SUB+= PORTDATA="" .endif CONFIGURE_SHELL?= ${SH} MAKE_SHELL?= ${SH} CONFIGURE_ENV+= SHELL=${SH} CONFIG_SHELL=${SH} MAKE_ENV+= SHELL=${SH} NO_LINT=YES .if defined(MANCOMPRESSED) .if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \ ${MANCOMPRESSED} != maybe check-makevars:: @${ECHO_MSG} "${PKGNAME}: Makefile error: value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"". @${FALSE} .endif .endif .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) MANCOMPRESSED?= yes .else MANCOMPRESSED?= no .endif .if defined(PATCHFILES) .if ${PATCHFILES:M*.zip}x != x PATCH_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip .endif .endif # Check the compatibility layer for amd64/ia64 .if ${ARCH} == "amd64" || ${ARCH} =="ia64" .if exists(/usr/lib32) HAVE_COMPAT_IA32_LIBS?= YES .endif .if !defined(HAVE_COMPAT_IA32_KERN) HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi .endif .endif .if defined(IA32_BINARY_PORT) && ${ARCH} != "i386" .if ${ARCH} == "amd64" || ${ARCH} == "ia64" .if !defined(HAVE_COMPAT_IA32_KERN) IGNORE= requires a kernel with compiled-in IA32 compatibility .elif !defined(HAVE_COMPAT_IA32_LIBS) IGNORE= requires 32-bit libraries installed under /usr/lib32 .endif _LDCONFIG_FLAGS=-32 LIB32DIR= lib32 .else IGNORE= requires i386 (or compatible) platform to run .endif .else LIB32DIR= lib .endif PLIST_SUB+= LIB32DIR=${LIB32DIR} .if defined(WITH_PKGNG) .if !defined(PKG_DEPENDS) .if !defined(CLEAN_FETCH_ENV) PKG_DEPENDS+= ${LOCALBASE}/sbin/pkg:${PORTSDIR}/ports-mgmt/pkg .endif .endif .endif .if defined(USE_LHA) EXTRACT_DEPENDS+= lha:${PORTSDIR}/archivers/lha .endif .if defined(USE_ZIP) EXTRACT_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip .endif .if defined(USE_XZ) && ( (${OSVERSION} >= 900000 && ${OSVERSION} < 900012) || ${OSVERSION} < 800505 ) EXTRACT_DEPENDS+= ${LOCALBASE}/bin/xz:${PORTSDIR}/archivers/xz .endif .if defined(USE_MAKESELF) EXTRACT_DEPENDS+= unmakeself:${PORTSDIR}/archivers/unmakeself .endif .if defined(USE_GMAKE) BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake CONFIGURE_ENV+= MAKE=${GMAKE} .endif .if defined(USE_PKGCONFIG) .if ${USE_PKGCONFIG:L} == yes || ${USE_PKGCONFIG:L} == build BUILD_DEPENDS+= pkgconf:${PORTSDIR}/devel/pkgconf CONFIGURE_ENV+= PKG_CONFIG=pkgconf .elif ${USE_PKGCONFIG:L} == both RUN_DEPENDS+= pkgconf:${PORTSDIR}/devel/pkgconf BUILD_DEPENDS+= pkgconf:${PORTSDIR}/devel/pkgconf CONFIGURE_ENV+= PKG_CONFIG=pkgconf .elif ${USE_PKGCONFIG:L} == run RUN_DEPENDS+= pkgconf:${PORTSDIR}/devel/pkgconf .endif .endif .if defined(USE_GCC) || defined(USE_FORTRAN) .include "${PORTSDIR}/Mk/bsd.gcc.mk" .endif .if defined(USE_BINUTILS) && !defined(DISABLE_BINUTILS) BUILD_DEPENDS+= ${LOCALBASE}/bin/as:${PORTSDIR}/devel/binutils BINUTILS?= ADDR2LINE AR AS CPPFILT GPROF LD NM OBJCOPY OBJDUMP RANLIB \ READELF SIZE STRINGS BINUTILS_NO_MAKE_ENV?= . for b in ${BINUTILS} ${b}= ${LOCALBASE}/bin/${b:C/PP/++/:L} . if defined(GNU_CONFIGURE) || defined(BINUTILS_CONFIGURE) CONFIGURE_ENV+= ${b}="${${b}}" . endif . if ${BINUTILS_NO_MAKE_ENV:M${b}} == "" MAKE_ENV+= ${b}="${${b}}" . endif . endfor .endif .if defined(USE_OPENLDAP) || defined(WANT_OPENLDAP_VER) .include "${PORTSDIR}/Mk/bsd.ldap.mk" .endif .if defined(USE_READLINE) .if ${USE_READLINE} == "port" || ${OSVERSION} > 1000000 LIB_DEPENDS+= readline.6:${PORTSDIR}/devel/readline CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib -lreadline .endif .endif .if defined(USE_OPENAL) _OPENAL_ALL= al si soft alut _OPENAL_LIBS= si soft # Default choice. _DEFAULT_OPENAL= soft _OPENAL_SOFT= openal.1:${PORTSDIR}/audio/openal-soft _OPENAL_SI= openal.0:${PORTSDIR}/audio/openal _OPENAL_ALUT= alut.1:${PORTSDIR}/audio/freealut .if exists(${LOCALBASE}/lib/libopenal.a) _HAVE_OPENAL= si .elif exists(${LOCALBASE}/bin/openal-info) _HAVE_OPENAL= soft .endif .if ${USE_OPENAL} == "yes" # Be friendly. USE_OPENAL= ${_DEFAULT_OPENAL} .endif __USED_OPENAL= _USE_OPENAL= .for component in ${USE_OPENAL} .if ${__USED_OPENAL:M${component}} == "" __USED_OPENAL+= ${component} .if ${_OPENAL_ALL:M${component}} == "" BROKEN= OPENAL mismatch: unknown component ${component} .elif ${_OPENAL_ALL:M${component}} == "al" # Check if the user wish matches the found OpenAL system. .if defined(WANT_OPENAL) && defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${WANT_OPENAL} BROKEN= OPENAL mismatch: ${_HAVE_OPENAL} is installed, but ${WANT_OPENAL} desired .endif # WANT_OPENAL .if defined(_HAVE_OPENAL) _OPENAL_SYSTEM= ${_HAVE_OPENAL} .elif defined(WANT_OPENAL) _OPENAL_SYSTEM= ${WANT_OPENAL} .else _OPENAL_SYSTEM= ${_DEFAULT_OPENAL} .endif # _HAVE_OPENAL _USE_OPENAL+= ${_OPENAL_${_OPENAL_SYSTEM:U}} .else # ${_OPENAL_ALL:M${component}} == "" .if ${_OPENAL_LIBS:M${component}} == ${component} # Check for the system implementation to use. .if defined(WANT_OPENAL) && ${WANT_OPENAL} != ${component} BROKEN= OPENAL mismatch: wants to use ${component}, while you wish to use ${WANT_OPENAL} .endif .if defined(_OPENAL_SYSTEM) BROKEN= OPENAL mismatch: cannot use ${component} and al together. .endif .if defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${component} BROKEN= OPENAL mismatch: wants to use ${component}, but ${_HAVE_OPENAL} is installed .endif _OPENAL_SYSTEM= ${component} .endif # ${_OPENAL_LIBS:M${component}} == ${component} _USE_OPENAL+= ${_OPENAL_${component:U}} .endif # ${_OPENAL_ALL:M${component}} == "" .endif # ${__USED_OPENAL:M${component} == "" .endfor # component in ${USE_OPENAL} .for dep in ${_USE_OPENAL} LIB_DEPENDS+= ${dep} .endfor .endif # USE_OPENAL .if defined(USE_FAM) DEFAULT_FAM_SYSTEM= gamin # Currently supported FAM systems FAM_SYSTEM_FAM= fam.0:${PORTSDIR}/devel/fam FAM_SYSTEM_GAMIN= fam.0:${PORTSDIR}/devel/gamin .if exists(${LOCALBASE}/libexec/gam_server) _HAVE_FAM_SYSTEM= gamin .elif exists(${LOCALBASE}/bin/fam) _HAVE_FAM_SYSTEM= fam .endif .if defined(WANT_FAM_SYSTEM) .if defined(WITH_FAM_SYSTEM) && ${WITH_FAM_SYSTEM}!=${WANT_FAM_SYSTEM} IGNORE= wants to use ${WANT_FAM_SYSTEM} as its FAM system, while you wish to use ${WITH_FAM_SYSTEM} .endif FAM_SYSTEM= ${WANT_FAM_SYSTEM} .elif defined(WITH_FAM_SYSTEM) FAM_SYSTEM= ${WITH_FAM_SYSTEM} .else .if defined(_HAVE_FAM_SYSTEM) FAM_SYSTEM= ${_HAVE_FAM_SYSTEM} .else FAM_SYSTEM= ${DEFAULT_FAM_SYSTEM} .endif .endif # WANT_FAM_SYSTEM .if defined(_HAVE_FAM_SYSTEM) .if ${_HAVE_FAM_SYSTEM}!= ${FAM_SYSTEM} BROKEN= FAM system mismatch: ${_HAVE_FAM_SYSTEM} is installed, while desired FAM system is ${FAM_SYSTEM} .endif .endif .if defined(FAM_SYSTEM_${FAM_SYSTEM:U}) LIB_DEPENDS+= ${FAM_SYSTEM_${FAM_SYSTEM:U}} .else IGNORE= cannot be built with unknown FAM system: ${FAM_SYSTEM} .endif .endif # USE_FAM .if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" SUB_FILES+= ${USE_RC_SUBR} .endif .if defined(USE_RCORDER) SUB_FILES+= ${USE_RCORDER} .endif .if defined(USE_LDCONFIG) && ${USE_LDCONFIG:L} == "yes" USE_LDCONFIG= ${PREFIX}/lib .endif .if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:L} == "yes" IGNORE= has USE_LDCONFIG32 set to yes, which is not correct .endif .if defined(USE_ICONV) LIB_DEPENDS+= iconv.3:${PORTSDIR}/converters/libiconv .endif .if defined(USE_GETTEXT) . if ${USE_GETTEXT:L} == "build" BUILD_DEPENDS+= xgettext:${PORTSDIR}/devel/gettext . elif ${USE_GETTEXT:L} == "run" RUN_DEPENDS+= xgettext:${PORTSDIR}/devel/gettext . elif ${USE_GETTEXT:L} == "yes" LIB_DEPENDS+= intl:${PORTSDIR}/devel/gettext . else IGNORE= USE_GETTEXT can be only one of build, run, or yes . endif .endif .if defined(USE_LINUX_PREFIX) && defined(USE_LDCONFIG) # we need ${LINUXBASE}/sbin/ldconfig USE_LINUX?= yes .endif .if defined(USE_LINUX) . if !defined(LINUX_OSRELEASE) LINUX_OSRELEASE!= ${ECHO_CMD} `${SYSCTL} -n compat.linux.osrelease 2>/dev/null` . endif # install(1) also does a brandelf on strip, so don't strip with FreeBSD tools. STRIP= . if exists(${LINUXBASE}/usr/bin/strip) STRIP_CMD= ${LINUXBASE}/usr/bin/strip . else STRIP_CMD= ${TRUE} . endif # Allow the user to specify another linux_base version. . if defined(OVERRIDE_LINUX_BASE_PORT) . if ${USE_LINUX:L} == yes USE_LINUX= ${OVERRIDE_LINUX_BASE_PORT} . endif . endif # NOTE: when you update the default linux_base version (case "yes"), # don't forget to update the Handbook! . if exists(${PORTSDIR}/emulators/linux_base-${USE_LINUX}) LINUX_BASE_PORT= ${LINUXBASE}/bin/sh:${PORTSDIR}/emulators/linux_base-${USE_LINUX} . else . if ${USE_LINUX:L} == "yes" . if ${OSVERSION} < 800076 || ${LINUX_OSRELEASE} == "2.4.2" LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-fc4 . else LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-f10 . endif . else IGNORE= cannot be built: there is no emulators/linux_base-${USE_LINUX}, perhaps wrong use of USE_LINUX or OVERRIDE_LINUX_BASE_PORT . endif . endif RUN_DEPENDS+= ${LINUX_BASE_PORT} .endif .if defined(USE_MOTIF) USE_XORG+= xpm .if defined(WANT_LESSTIF) LIB_DEPENDS+= Xm:${PORTSDIR}/x11-toolkits/lesstif NO_OPENMOTIF= yes .endif .if !defined(NO_OPENMOTIF) LIB_DEPENDS+= Xm.4:${PORTSDIR}/x11-toolkits/open-motif .endif .endif .if defined(USE_FREETYPE) LIB_DEPENDS+= ttf.4:${PORTSDIR}/print/freetype .endif X_IMAKE_PORT= ${PORTSDIR}/devel/imake X_FONTSERVER_PORT= ${PORTSDIR}/x11-fonts/xfs X_VFBSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-vfbserver X_NESTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-nestserver X_FONTS_ENCODINGS_PORT= ${PORTSDIR}/x11-fonts/encodings X_FONTS_MISC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-miscbitmaps X_FONTS_100DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-100dpi X_FONTS_75DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-75dpi X_FONTS_CYRILLIC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-cyrillic X_FONTS_TTF_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-truetype X_FONTS_TYPE1_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-type1 X_FONTS_ALIAS_PORT= ${PORTSDIR}/x11-fonts/font-alias .if defined(USE_IMAKE) CONFIGURE_ENV+= IMAKECPP="${CPP}" MAKE_ENV+= IMAKECPP="${CPP}" MAKE_FLAGS?= CC="${CC}" CXX="${CXX}" BUILD_DEPENDS+= imake:${X_IMAKE_PORT} .endif .if defined(USE_DISPLAY) && !defined(DISPLAY) BUILD_DEPENDS+= Xvfb:${X_VFBSERVER_PORT} \ ${LOCALBASE}/lib/X11/fonts/misc/8x13O.pcf.gz:${X_FONTS_MISC_PORT} \ ${LOCALBASE}/lib/X11/fonts/misc/fonts.alias:${X_FONTS_ALIAS_PORT} \ ${LOCALBASE}/share/X11/xkb/rules/base:${PORTSDIR}/x11/xkeyboard-config \ xkbcomp:${PORTSDIR}/x11/xkbcomp .if !defined(PACKAGE_BUILDING) CONFIGURE_ENV+= DISPLAY="localhost:1001" MAKE_ENV+= DISPLAY="localhost:1001" .endif .endif PKG_IGNORE_DEPENDS?= 'this_port_does_not_exist' _GL_gl_LIB_DEPENDS= GL.1:${PORTSDIR}/graphics/libGL _GL_glew_LIB_DEPENDS= GLEW.1:${PORTSDIR}/graphics/glew _GL_glu_LIB_DEPENDS= GLU.1:${PORTSDIR}/graphics/libGLU _GL_glw_LIB_DEPENDS= GLw.1:${PORTSDIR}/graphics/libGLw _GL_glut_LIB_DEPENDS= glut.12:${PORTSDIR}/graphics/freeglut _GL_linux_RUN_DEPENDS= ${LINUXBASE}/usr/X11R6/lib/libGL.so.1:${PORTSDIR}/graphics/linux_dri .if defined(USE_GL) . if ${USE_GL:L} == "yes" USE_GL= glu . endif . for _component in ${USE_GL} . if !defined(_GL_${_component}_LIB_DEPENDS) && \ !defined(_GL_${_component}_RUN_DEPENDS) IGNORE= uses unknown GL component . else LIB_DEPENDS+= ${_GL_${_component}_LIB_DEPENDS} RUN_DEPENDS+= ${_GL_${_component}_RUN_DEPENDS} . endif . endfor .endif .if defined(WITH_PKGNG) .include "${PORTSDIR}/Mk/bsd.pkgng.mk" .endif .if defined(USE_LOCAL_MK) .include "${PORTSDIR}/Mk/bsd.local.mk" .endif .if defined(USE_XORG) || defined(XORG_CAT) .include "${PORTSDIR}/Mk/bsd.xorg.mk" .endif .if defined(USE_MYSQL) || defined(WANT_MYSQL_VER) || \ defined(USE_PGSQL) || defined(WANT_PGSQL_VER) || \ defined(USE_BDB) || defined(USE_SQLITE) || defined(USE_FIREBIRD) .include "${PORTSDIR}/Mk/bsd.database.mk" .endif .if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER1) .include "${PORTSDIR}/Mk/bsd.gstreamer.mk" .endif .if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART) .include "${PORTSDIR}/Mk/bsd.efl.mk" .endif .if defined(USE_JAVA) .include "${PORTSDIR}/Mk/bsd.java.mk" .endif .if defined(USE_LINUX_RPM) .include "${PORTSDIR}/Mk/bsd.linux-rpm.mk" .endif .if defined(USE_LINUX_APPS) .include "${PORTSDIR}/Mk/bsd.linux-apps.mk" .endif .if defined(USE_QT4) .include "${PORTSDIR}/Mk/bsd.qt.mk" .endif .if defined(USE_SCONS) .include "${PORTSDIR}/Mk/bsd.scons.mk" .endif .if defined(USE_SDL) || defined(WANT_SDL) .include "${PORTSDIR}/Mk/bsd.sdl.mk" .endif .include "${PORTSDIR}/Mk/bsd.perl.mk" .if defined(USE_PHP) .include "${PORTSDIR}/Mk/bsd.php.mk" .endif .if defined(USE_PYTHON) .include "${PORTSDIR}/Mk/bsd.python.mk" .endif .if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TK) || defined(USE_TK_BUILD) .include "${PORTSDIR}/Mk/bsd.tcl.mk" .endif .if defined(USE_LUA) || defined(USE_LUA_NOT) .include "${PORTSDIR}/Mk/bsd.lua.mk" .endif .if defined(USE_WX) || defined(USE_WX_NOT) .include "${PORTSDIR}/Mk/bsd.wx.mk" .endif .if defined(USE_APACHE) || defined(USE_APACHE_BUILD) || defined(USE_APACHE_RUN) .include "${PORTSDIR}/Mk/bsd.apache.mk" .endif .if defined(USE_AUTOTOOLS) .include "${PORTSDIR}/Mk/bsd.autotools.mk" .endif .if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL) .include "${PORTSDIR}/Mk/bsd.fpc.mk" .endif .if defined(WANT_GECKO) || defined(USE_GECKO) .include "${PORTSDIR}/Mk/bsd.gecko.mk" .endif .if defined(WANT_GNOME) || defined(USE_GNOME) .include "${PORTSDIR}/Mk/bsd.gnome.mk" .endif .if defined(USE_XFCE) .include "${PORTSDIR}/Mk/bsd.xfce.mk" .endif .if defined(USE_KDE4) .include "${PORTSDIR}/Mk/bsd.kde4.mk" .endif .if exists(${PORTSDIR}/Makefile.inc) .include "${PORTSDIR}/Makefile.inc" USE_SUBMAKE= yes .endif .if defined(USE_XORG) # Add explicit X options to avoid problems with false positives in configure .if defined(GNU_CONFIGURE) CONFIGURE_ARGS+=--x-libraries=${LOCALBASE}/lib --x-includes=${LOCALBASE}/include .endif .endif # Set the default for the installation of Postscript(TM)- # compatible functionality. .if !defined(USE_GHOSTSCRIPT) . if defined(USE_GHOSTSCRIPT_BUILD) _USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_BUILD} . elif defined(USE_GHOSTSCRIPT_RUN) _USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_RUN} . endif .else _USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT} .endif .if defined(WITH_GHOSTSCRIPT_VER) && !empty(WITH_GHOSTSCRIPT_VER:M[89]) _USE_GHOSTSCRIPT_DEFAULT_VER= ${WITH_GHOSTSCRIPT_VER} .else _USE_GHOSTSCRIPT_DEFAULT_VER= 9 .endif .if defined(_USE_GHOSTSCRIPT) . if !defined(WITHOUT_X11) _USE_GHOSTSCRIPT_PKGNAME_SUFFIX= . else _USE_GHOSTSCRIPT_PKGNAME_SUFFIX=-nox11 . endif . if !empty(_USE_GHOSTSCRIPT:M[89]) _USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT:M[89]} . else _USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER} . endif .else _USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER} .endif # Sanity check .if defined(_USE_GHOSTSCRIPT) && defined(WITH_GHOSTSCRIPT_VER) . if empty(WITH_GHOSTSCRIPT_VER:M[89]) . error You set an invalid value "${WITH_GHOSTSCRIPT_VER}" in WITH_GHOSTSCRIPT_VER. Abort. . elif ${_USE_GHOSTSCRIPT_VER} != ${WITH_GHOSTSCRIPT_VER} . error You set WITH_GHOSTSCRIPT_VER as ${WITH_GHOSTSCRIPT_VER} but ${PKGNAME} requires print/ghostscript${_USE_GHOSTSCRIPT_VER}. Abort. . endif .endif GHOSTSCRIPT_PORT?= print/ghostscript${_USE_GHOSTSCRIPT_VER}${_USE_GHOSTSCRIPT_PKGNAME_SUFFIX} # Set up the ghostscript dependencies. .if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_BUILD) BUILD_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT} .endif .if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_RUN) RUN_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT} .endif # Set up the cdrtools. .if defined(USE_CDRTOOLS) BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools .endif # Macro for doing in-place file editing using regexps REINPLACE_ARGS?= -i.bak REINPLACE_CMD?= ${SED} ${REINPLACE_ARGS} # Names of cookies used to skip already completed stages EXTRACT_COOKIE?= ${WRKDIR}/.extract_done.${PORTNAME}.${PREFIX:S/\//_/g} CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done.${PORTNAME}.${PREFIX:S/\//_/g} INSTALL_COOKIE?= ${WRKDIR}/.install_done.${PORTNAME}.${PREFIX:S/\//_/g} BUILD_COOKIE?= ${WRKDIR}/.build_done.${PORTNAME}.${PREFIX:S/\//_/g} PATCH_COOKIE?= ${WRKDIR}/.patch_done.${PORTNAME}.${PREFIX:S/\//_/g} PACKAGE_COOKIE?= ${WRKDIR}/.package_done.${PORTNAME}.${PREFIX:S/\//_/g} # How to do nothing. Override if you, for some strange reason, would rather # do something. DO_NADA?= ${TRUE} # Use this as the first operand to always build dependency. NONEXISTENT?= /nonexistent CHECKSUM_ALGORITHMS?= sha256 DISTINFO_FILE?= ${MASTERDIR}/distinfo MAKE_FLAGS?= -f MAKEFILE?= Makefile MAKE_ENV+= PREFIX=${PREFIX} \ LOCALBASE=${LOCALBASE} \ MOTIFLIB="${MOTIFLIB}" LIBDIR="${LIBDIR}" \ CC="${CC}" CFLAGS="${CFLAGS}" \ CPP="${CPP}" CPPFLAGS="${CPPFLAGS}" \ LDFLAGS="${LDFLAGS}" \ CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \ MANPREFIX="${MANPREFIX}" # Add -fno-strict-aliasing to CFLAGS with optimization level -O2 or higher. # gcc 4.x enable strict aliasing optimization with -O2 which is known to break # a lot of ports. .if !defined(WITHOUT_NO_STRICT_ALIASING) .if ${CC} != "icc" .if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing) CFLAGS+= -fno-strict-aliasing .endif .endif .endif .if defined(USE_CSTD) CFLAGS:= ${CFLAGS:N-std=*} -std=${USE_CSTD} .endif # Multiple make jobs support .if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE) _MAKE_JOBS= # .else .if defined(MAKE_JOBS_SAFE) || defined(FORCE_MAKE_JOBS) MAKE_JOBS_NUMBER?= `${SYSCTL} -n kern.smp.cpus` _MAKE_JOBS?= -j${MAKE_JOBS_NUMBER} .if defined(FORCE_MAKE_JOBS) && !defined(MAKE_JOBS_SAFE) BUILD_FAIL_MESSAGE+= "You have chosen to use multiple make jobs (parallelization) for all ports. This port was not tested for this setting. Please remove FORCE_MAKE_JOBS and retry the build before reporting the failure to the maintainer." .endif .endif .endif # ccache support # Support NO_CCACHE for common setups, require WITH_CCACHE_BUILD, and # don't use if ccache already set in CC .if !defined(NO_CCACHE) && defined(WITH_CCACHE_BUILD) && !${CC:M*ccache*} # Avoid depends loops between pkg and ccache . if !${.CURDIR:M*/devel/ccache} && !${.CURDIR:M*/ports-mgmt/pkg} BUILD_DEPENDS+= ${LOCALBASE}/bin/ccache:${PORTSDIR}/devel/ccache . endif # Prepend the ccache dir into the PATH and setup ccache env MAKE_ENV+= PATH=${LOCALBASE}/libexec/ccache:${PATH} .endif PTHREAD_CFLAGS?= PTHREAD_LIBS?= -pthread FETCH_BINARY?= /usr/bin/fetch FETCH_ARGS?= -AFpr FETCH_REGET?= 1 .if !defined(DISABLE_SIZE) FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE} .endif FETCH_CMD?= ${FETCH_BINARY} ${FETCH_ARGS} .if defined(RANDOMIZE_MASTER_SITES) .if exists(/usr/games/random) RANDOM_CMD?= /usr/games/random RANDOM_ARGS?= "-w -f -" _RANDOMIZE_SITES= " |${RANDOM_CMD} ${RANDOM_ARGS}" .endif .endif TOUCH?= /usr/bin/touch TOUCH_FLAGS?= -f DISTORIG?= .bak.orig PATCH?= /usr/bin/patch PATCH_STRIP?= -p0 PATCH_DIST_STRIP?= -p0 .if defined(PATCH_DEBUG) PATCH_DEBUG_TMP= yes PATCH_ARGS?= -d ${PATCH_WRKSRC} -E ${PATCH_STRIP} PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} -E ${PATCH_DIST_STRIP} .else PATCH_DEBUG_TMP= no PATCH_ARGS?= -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_STRIP} PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP} .endif .if defined(BATCH) PATCH_ARGS+= --batch PATCH_DIST_ARGS+= --batch .endif # Prevent breakage with VERSION_CONTROL=numbered PATCH_ARGS+= -V simple .if defined(PATCH_CHECK_ONLY) PATCH_ARGS+= -C PATCH_DIST_ARGS+= -C .endif .if ${PATCH} == "/usr/bin/patch" PATCH_ARGS+= --suffix .orig PATCH_DIST_ARGS+= --suffix .orig .endif TAR?= /usr/bin/tar # EXTRACT_SUFX is defined in .pre.mk section .if defined(USE_LHA) EXTRACT_CMD?= ${LHA_CMD} EXTRACT_BEFORE_ARGS?= xfqw=${WRKDIR} EXTRACT_AFTER_ARGS?= .elif defined(USE_ZIP) EXTRACT_CMD?= ${UNZIP_CMD} EXTRACT_BEFORE_ARGS?= -qo EXTRACT_AFTER_ARGS?= -d ${WRKDIR} .elif defined(USE_MAKESELF) EXTRACT_CMD?= ${UNMAKESELF_CMD} EXTRACT_BEFORE_ARGS?= EXTRACT_AFTER_ARGS?= .else EXTRACT_BEFORE_ARGS?= -dc .if defined(EXTRACT_PRESERVE_OWNERSHIP) EXTRACT_AFTER_ARGS?= | ${TAR} -xf - .else EXTRACT_AFTER_ARGS?= | ${TAR} -xf - --no-same-owner --no-same-permissions .endif .if defined(USE_BZIP2) EXTRACT_CMD?= ${BZIP2_CMD} .elif defined(USE_XZ) EXTRACT_CMD?= ${XZ_CMD} .else EXTRACT_CMD?= ${GZIP_CMD} .endif .endif # Figure out where the local mtree file is .if !defined(MTREE_FILE) && !defined(NO_MTREE) .if ${PREFIX} == /usr MTREE_FILE= /etc/mtree/BSD.usr.dist .else MTREE_FILE= ${PORTSDIR}/Templates/BSD.local.dist .endif MTREE_FILE_DEFAULT=yes .endif MTREE_CMD?= /usr/sbin/mtree MTREE_ARGS?= -U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p READLINK_CMD?= /usr/bin/readlink # Determine whether or not we can use rootly owner/group functions. .if !defined(UID) UID!= ${ID} -u .endif .if ${UID} == 0 _BINOWNGRP= -o ${BINOWN} -g ${BINGRP} _SHROWNGRP= -o ${SHAREOWN} -g ${SHAREGRP} _MANOWNGRP= -o ${MANOWN} -g ${MANGRP} .else _BINOWNGRP= _SHROWNGRP= _MANOWNGRP= .endif # A few aliases for *-install targets INSTALL_PROGRAM= \ ${INSTALL} ${COPY} ${STRIP} ${_BINOWNGRP} -m ${BINMODE} INSTALL_KLD= \ ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE} INSTALL_LIB= \ ${INSTALL} ${COPY} ${STRIP} ${_SHROWNGRP} -m ${SHAREMODE} INSTALL_SCRIPT= \ ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE} INSTALL_DATA= \ ${INSTALL} ${COPY} ${_SHROWNGRP} -m ${SHAREMODE} INSTALL_MAN= \ ${INSTALL} ${COPY} ${_MANOWNGRP} -m ${MANMODE} INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ BSD_INSTALL_LIB="${INSTALL_LIB}" \ BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ BSD_INSTALL_DATA="${INSTALL_DATA}" \ BSD_INSTALL_MAN="${INSTALL_MAN}" MAKE_ENV+= ${INSTALL_MACROS} SCRIPTS_ENV+= ${INSTALL_MACROS} # Macro for copying entire directory tree with correct permissions .if ${UID} == 0 COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ 2>&1) && \ ${CHOWN} -R ${BINOWN}:${BINGRP} $$1 && \ ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \ ${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' -- COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ 2>&1) && \ ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} $$1 && \ ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \ ${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' -- .else COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ 2>&1) && \ ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \ ${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' -- COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ 2>&1) && \ ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \ ${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' -- .endif # The user can override the NO_PACKAGE by specifying this from # the make command line .if defined(FORCE_PACKAGE) .undef NO_PACKAGE .endif DESCR?= ${PKGDIR}/pkg-descr PLIST?= ${PKGDIR}/pkg-plist PKGHELP?= ${PKGDIR}/pkg-help PKGINSTALL?= ${PKGDIR}/pkg-install PKGDEINSTALL?= ${PKGDIR}/pkg-deinstall PKGREQ?= ${PKGDIR}/pkg-req PKGMESSAGE?= ${PKGDIR}/pkg-message TMPPLIST?= ${WRKDIR}/.PLIST.mktmp TMPPLIST_SORT?= ${WRKDIR}/.PLIST.mktmp.sorted TMPGUCMD?= ${WRKDIR}/.PLIST.gucmd .for _CATEGORY in ${CATEGORIES} PKGCATEGORY?= ${_CATEGORY} .endfor _PORTDIRNAME= ${.CURDIR:T} PORTDIRNAME?= ${_PORTDIRNAME} PKGORIGIN?= ${PKGCATEGORY}/${PORTDIRNAME} .if !defined(PKG_ARGS) PKG_ARGS= -v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} actual-package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | ${SORT} -u -t : -k 2`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS} .if !defined(NO_MTREE) PKG_ARGS+= -m ${MTREE_FILE} .endif .if defined(PKGORIGIN) PKG_ARGS+= -o ${PKGORIGIN} .endif .if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS) PKG_ARGS+= -C "${CONFLICTS}" .endif .if defined(CONFLICTS_INSTALL) && !defined(DISABLE_CONFLICTS) PKG_ARGS+= -C "${CONFLICTS_INSTALL}" .endif .endif .if defined(PKG_NOCOMPRESS) PKG_SUFX?= .tar .else .if defined(WITH_PKGNG) PKG_SUFX?= .txz .else PKG_SUFX?= .tbz .endif .endif # where pkg_add records its dirty deeds. PKG_DBDIR?= /var/db/pkg MOTIFLIB?= -L${LOCALBASE}/lib -lXm -lXp ALL_TARGET?= all INSTALL_TARGET?= install # Integrate with the license auditing framework .if !defined (DISABLE_LICENSES) .include "${PORTSDIR}/Mk/bsd.licenses.mk" .endif # Popular master sites .include "${PORTSDIR}/Mk/bsd.sites.mk" # Empty declaration to avoid "variable MASTER_SITES recursive" error MASTER_SITES?= PATCH_SITES?= _MASTER_SITES_DEFAULT?= _PATCH_SITES_DEFAULT?= # Feed internal _{MASTER,PATCH}_SITES_n where n is a group designation # as per grouping rules (:something) # Organize _{MASTER,PATCH}_SITES_{DEFAULT,[^/:]+} according to grouping # rules (:something) .for _S in ${MASTER_SITES} _S_TEMP= ${_S:S/^${_S:C@/?:[^/:]+$@/@}//:S/^://} . if !empty(_S_TEMP) . for _group in ${_S_TEMP:S/,/ /g} _G_TEMP= ${_group} . if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default check-makevars:: @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITES" @${FALSE} . endif _MASTER_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@} . endfor . else _MASTER_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@} . endif .endfor .for _S in ${PATCH_SITES} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} . if !empty(_S_TEMP) . for _group in ${_S_TEMP:S/,/ /g} _G_TEMP= ${_group} . if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default check-makevars:: @${ECHO_MSG} "The words all, ALL and default are reserved and cannot be" @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITES" @${FALSE} . endif _PATCH_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@} . endfor . else _PATCH_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@} . endif .endfor # Feed internal _{MASTER,PATCH}_SITE_SUBDIR_n where n is a group designation # as per grouping rules (:something) # Organize _{MASTER,PATCH}_SITE_SUBDIR_{DEFAULT,[^/:]+} according to grouping # rules (:something) .for _S in ${MASTER_SITE_SUBDIR} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} . if !empty(_S_TEMP) . for _group in ${_S_TEMP:S/,/ /g} _G_TEMP= ${_group} . if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default check-makevars:: @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITE_SUBDIR" @${FALSE} . endif . if defined(_MASTER_SITES_${_group}) _MASTER_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@} . endif . endfor . else . if defined(_MASTER_SITES_DEFAULT) _MASTER_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@} . endif . endif .endfor .for _S in ${PATCH_SITE_SUBDIR} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} . if !empty(_S_TEMP) . for _group in ${_S_TEMP:S/,/ /g} _G_TEMP= ${_group} . if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default check-makevars:: @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITE_SUBDIR" @${FALSE} . endif . if defined(_PATCH_SITES_${_group}) _PATCH_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@} . endif . endfor . else . if defined(_PATCH_SITES_DEFAULT) _PATCH_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@} . endif . endif .endfor # Substitute subdirectory names # XXX simpler/faster solution but not the best space wise, suggestions please .for _S in ${MASTER_SITES} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} . if !empty(_S_TEMP) . for _group in ${_S_TEMP:S/,/ /g} . if !defined(_MASTER_SITE_SUBDIR_${_group}) MASTER_SITES_TMP= ${_MASTER_SITES_${_group}:S^%SUBDIR%/^^} . else _S_TEMP_TEMP= ${_MASTER_SITES_${_group}:M*%SUBDIR%/*} . if empty(_S_TEMP_TEMP) MASTER_SITES_TMP= ${_MASTER_SITES_${_group}} . else MASTER_SITES_TMP= . for site in ${_MASTER_SITES_${_group}} _S_TEMP_TEMP= ${site:M*%SUBDIR%/*} . if empty(_S_TEMP_TEMP) MASTER_SITES_TMP+= ${site} . else . for dir in ${_MASTER_SITE_SUBDIR_${_group}} MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} . endfor . endif . endfor . endif . endif _MASTER_SITES_${_group}:= ${MASTER_SITES_TMP} . endfor . endif .endfor .if defined(_MASTER_SITE_SUBDIR_DEFAULT) _S_TEMP= ${_MASTER_SITES_DEFAULT:M*%SUBDIR%/*} . if empty(_S_TEMP) MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT} . else MASTER_SITES_TMP= . for site in ${_MASTER_SITES_DEFAULT} _S_TEMP_TEMP= ${site:M*%SUBDIR%/*} . if empty(_S_TEMP_TEMP) MASTER_SITES_TMP+= ${site} . else . for dir in ${_MASTER_SITE_SUBDIR_DEFAULT} MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} . endfor . endif . endfor . endif .else MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT:S^%SUBDIR%/^^} .endif _MASTER_SITES_DEFAULT:= ${MASTER_SITES_TMP} MASTER_SITES_TMP= .for _S in ${PATCH_SITES} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} . if !empty(_S_TEMP) . for _group in ${_S_TEMP:S/,/ /g} . if !defined(_PATCH_SITE_SUBDIR_${_group}) PATCH_SITES_TMP= ${_PATCH_SITES_${_group}:S^%SUBDIR%/^^} . else _S_TEMP_TEMP= ${_PATCH_SITES_${_group}:M*%SUBDIR%/*} . if empty(_S_TEMP_TEMP) PATCH_SITES_TMP= ${_PATCH_SITES_${_group}} . else PATCH_SITES_TMP= . for site in ${_PATCH_SITES_${_group}} _S_TEMP_TEMP= ${site:M*%SUBDIR%/*} . if empty(_S_TEMP_TEMP) PATCH_SITES_TMP+= ${site} . else . for dir in ${_PATCH_SITE_SUBDIR_${_group}} PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} . endfor . endif . endfor . endif . endif _PATCH_SITES_${_group}:= ${PATCH_SITES_TMP} . endfor . endif .endfor .if defined(_PATCH_SITE_SUBDIR_DEFAULT) _S_TEMP= ${_PATCH_SITES_DEFAULT:M*%SUBDIR%/*} . if empty(_S_TEMP) PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT} . else PATCH_SITES_TMP= . for site in ${_PATCH_SITES_DEFAULT} _S_TEMP_TEMP= ${site:M*%SUBDIR%/*} . if empty(_S_TEMP_TEMP) PATCH_SITES_TMP+= ${site} . else . for dir in ${_PATCH_SITE_SUBDIR_DEFAULT} PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} . endfor . endif . endfor . endif .else PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT:S^%SUBDIR%/^^} .endif _PATCH_SITES_DEFAULT:= ${PATCH_SITES_TMP} PATCH_SITES_TMP= # The primary backup site. MASTER_SITE_BACKUP?= \ ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^} # If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository # for everything, but don't search it twice by appending it to the end. .if defined(MASTER_SITE_FREEBSD) _MASTER_SITE_OVERRIDE:= ${MASTER_SITE_BACKUP} _MASTER_SITE_BACKUP:= # empty .else _MASTER_SITE_OVERRIDE= ${MASTER_SITE_OVERRIDE} _MASTER_SITE_BACKUP= ${MASTER_SITE_BACKUP} .endif # Search CDROM first if mounted, symlink instead of copy if # FETCH_SYMLINK_DISTFILES is set .for MOUNTPT in ${CD_MOUNTPTS} .if exists(${MOUNTPT}/ports/distfiles) _MASTER_SITE_OVERRIDE:= file:${MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${_MASTER_SITE_OVERRIDE} .if defined(FETCH_SYMLINK_DISTFILES) FETCH_BEFORE_ARGS+= -l .endif .endif .endfor NOFETCHFILES?= # Organize DISTFILES, PATCHFILES, _MASTER_SITES_ALL, _PATCH_SITES_ALL # according to grouping rules (:something) DISTFILES?= ${DISTNAME}${EXTRACT_SUFX} _MASTER_SITES_ALL= ${_MASTER_SITES_DEFAULT} _PATCH_SITES_ALL= ${_PATCH_SITES_DEFAULT} _G_TEMP= DEFAULT .for _D in ${DISTFILES} _D_TEMP= ${_D:S/^${_D:C/:[^:]+$//}//} . if !empty(_D_TEMP) . for _group in ${_D_TEMP:S/^://:S/,/ /g} . if !defined(_MASTER_SITES_${_group}) _G_TEMP_TEMP= ${_G_TEMP:M/${_group}/} . if empty(_G_TEMP_TEMP) _G_TEMP+= ${_group} _MASTER_SITES_ALL+= ${_MASTER_SITES_${_group}} . endif . endif . endfor _DISTFILES+= ${_D:C/:[^:]+$//} . else _DISTFILES+= ${_D} . endif .endfor _G_TEMP= DEFAULT .for _P in ${PATCHFILES} _P_TEMP= ${_P:S/^${_P:C/:[^:]+$//}//} . if !empty(_P_TEMP) . for _group in ${_P_TEMP:S/^://:S/,/ /g} . if !defined(_PATCH_SITES_${_group}) _G_TEMP_TEMP= ${_G_TEMP:M/${_group}/} . if empty(_G_TEMP_TEMP) _G_TEMP+= ${_group} _PATCH_SITES_ALL+= ${_PATCH_SITES_${_group}} . endif . endif . endfor _PATCHFILES+= ${_P:C/:[^:]+$//} . else _PATCHFILES+= ${_P} . endif .endfor _G_TEMP= _G_TEMP_TEMP= ALLFILES?= ${_DISTFILES} ${_PATCHFILES} # # Sort the master site list according to the patterns in MASTER_SORT # MASTER_SORT?= MASTER_SORT_REGEX?= MASTER_SORT_REGEX+= ${MASTER_SORT:S|.|\\.|g:S|^|://[^/]*|:S|$|/|} MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S|\\|\\\\|g}"; } .for srt in ${MASTER_SORT_REGEX} MASTER_SORT_AWK+= /${srt:S|/|\\/|g}/ { good["${srt:S|\\|\\\\|g}"] = good["${srt:S|\\|\\\\|g}"] " " $$0 ; next; } .endfor MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; } SORTED_MASTER_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} master-sites-DEFAULT SORTED_PATCH_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-DEFAULT SORTED_MASTER_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} master-sites-ALL SORTED_PATCH_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-ALL # # Sort the master site list according to the patterns in MASTER_SORT # according to grouping rules (:something) # # for use in the fetch targets .for _S in ${MASTER_SITES} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//} . if !empty(_S_TEMP) . for _group in ${_S_TEMP:S/^://:S/,/ /g} . if !target(master-sites-${_group}) SORTED_MASTER_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} master-sites-${_group} master-sites-${_group}: @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} . endif . endfor . endif .endfor .for _S in ${PATCH_SITES} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//} . if !empty(_S_TEMP) . for _group in ${_S_TEMP:S/^://:S/,/ /g} . if !target(patch-sites-${_group}) SORTED_PATCH_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-${_group} patch-sites-${_group}: @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} . endif . endfor . endif .endfor # # Hackery to enable simple fetch targets with several dynamic MASTER_SITES # _MASTER_SITES_ENV= _MASTER_SITES_DEFAULT="${_MASTER_SITES_DEFAULT}" .for _F in ${DISTFILES} _F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://} . if !empty(_F_TEMP) . for _group in ${_F_TEMP:S/,/ /g} . if defined(_MASTER_SITES_${_group}) _MASTER_SITES_ENV+= _MASTER_SITES_${_group}="${_MASTER_SITES_${_group}}" . endif . endfor . endif .endfor _PATCH_SITES_ENV= _PATCH_SITES_DEFAULT="${_PATCH_SITES_DEFAULT}" .for _F in ${PATCHFILES} _F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://} . if !empty(_F_TEMP) . for _group in ${_F_TEMP:S/,/ /g} . if defined(_PATCH_SITES_${_group}) _PATCH_SITES_ENV+= _PATCH_SITES_${_group}="${_PATCH_SITES_${_group}}" . endif . endfor . endif .endfor master-sites-ALL: @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} patch-sites-ALL: @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} # has similar effect to old targets, i.e., access only {MASTER,PATCH}_SITES, not working with the new _n variables master-sites-DEFAULT: @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} patch-sites-DEFAULT: @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} # synonyms, mnemonics master-sites-all: master-sites-ALL patch-sites-all: patch-sites-ALL master-sites-default: master-sites-DEFAULT patch-sites-default: patch-sites-DEFAULT # compatibility with old behavior master-sites: master-sites-DEFAULT patch-sites: patch-sites-DEFAULT .if defined(IGNOREFILES) .if !defined(CKSUMFILES) CKSUMFILES!= \ for file in ${ALLFILES}; do \ ignore=0; \ for tmp in ${IGNOREFILES}; do \ if [ "$$file" = "$$tmp" ]; then \ ignore=1; \ fi; \ done; \ if [ "$$ignore" = 0 ]; then \ ${ECHO_CMD} "$$file"; \ fi; \ done .endif .else CKSUMFILES= ${ALLFILES} .endif # List of all files, with ${DIST_SUBDIR} in front. Used for checksum. .if defined(DIST_SUBDIR) .if defined(CKSUMFILES) && ${CKSUMFILES}!="" _CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//} .endif .if defined(IGNOREFILES) && ${IGNOREFILES}!="" _IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//} .endif .else _CKSUMFILES?= ${CKSUMFILES} _IGNOREFILES?= ${IGNOREFILES} .endif # This is what is actually going to be extracted, and is overridable # by user. EXTRACT_ONLY?= ${_DISTFILES} .if !target(maintainer) maintainer: @${ECHO_CMD} "${MAINTAINER}" .endif .if !target(check-makefile) check-makefile:: @${DO_NADA} .endif .if !defined(CATEGORIES) check-categories: @${ECHO_MSG} "${PKGNAME}: Makefile error: CATEGORIES is mandatory." @${FALSE} .else VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \ benchmarks biology cad chinese comms converters databases \ deskutils devel docs dns editors elisp emulators enlightenment finance french ftp \ games geography german gnome gnustep graphics hamradio haskell hebrew hungarian \ ipv6 irc japanese java kde kld korean lang linux lisp \ mail math mbone misc multimedia net net-im net-mgmt net-p2p news \ palm parallel pear perl5 plan9 polish portuguese ports-mgmt \ print python ruby rubygems russian \ scheme science security shells spanish sysutils \ tcl textproc tk \ ukrainian vietnamese windowmaker www \ x11 x11-clocks x11-drivers x11-fm x11-fonts x11-servers x11-themes \ x11-toolkits x11-wm xfce zope check-categories: .for cat in ${CATEGORIES} . if empty(VALID_CATEGORIES:M${cat}) @${ECHO_MSG} "${PKGNAME}: Makefile error: category ${cat} not in list of valid categories."; \ ${FALSE}; . endif .endfor .endif .if !target(check-makevars) check-makevars:: @${DO_NADA} .endif .if !target(check-depends) check-depends: @${DO_NADA} .endif PKGREPOSITORYSUBDIR?= All PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR} .if exists(${PACKAGES}) PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX} .else PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX} .endif # The "latest version" link -- ${PKGNAME} minus everthing after the last '-' PKGLATESTREPOSITORY?= ${PACKAGES}/Latest PKGBASE?= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX} LATEST_LINK?= ${PKGBASE} PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX} CONFIGURE_SCRIPT?= configure CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL} CONFIGURE_TARGET:= ${CONFIGURE_TARGET:S/--build=//} CONFIGURE_LOG?= config.log # A default message to print if do-configure fails. CONFIGURE_FAIL_MESSAGE?= "Please report the problem to ${MAINTAINER} [maintainer] and attach the \"${CONFIGURE_WRKSRC}/${CONFIGURE_LOG}\" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. a ${PKG_INFO} -Ea)." .if defined(GNU_CONFIGURE) # Maximum command line length .if !defined(CONFIGURE_MAX_CMD_LEN) CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax .endif GNU_CONFIGURE_PREFIX?= ${PREFIX} CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX} $${_LATE_CONFIGURE_ARGS} CONFIGURE_ENV+= CONFIG_SITE=${PORTSDIR}/Templates/config.site lt_cv_sys_max_cmd_len=${CONFIGURE_MAX_CMD_LEN} HAS_CONFIGURE= yes SET_LATE_CONFIGURE_ARGS= \ _LATE_CONFIGURE_ARGS="" ; \ if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--mandir'`" ]; then \ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --mandir=${MANPREFIX}/man" ; \ fi ; \ if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--infodir'`" ]; then \ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --infodir=${PREFIX}/${INFO_PATH}/${INFO_SUBDIR}" ; \ fi ; \ if [ -z "`./${CONFIGURE_SCRIPT} --version 2>&1 | ${EGREP} -i '(autoconf.*2\.13|Unrecognized option)'`" ]; then \ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --build=${CONFIGURE_TARGET}" ; \ else \ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} ${CONFIGURE_TARGET}" ; \ fi ; .endif # Passed to most of script invocations SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \ WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \ SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} .if defined(BATCH) SCRIPTS_ENV+= BATCH=yes .endif .if ${PREFIX} == /usr MANPREFIX?= /usr/share .else MANPREFIX?= ${PREFIX} .endif .for sect in 1 2 3 4 5 6 7 8 9 MAN${sect}PREFIX?= ${MANPREFIX} .endfor MANLPREFIX?= ${MANPREFIX} MANNPREFIX?= ${MANPREFIX} MANLANG?= "" # english only by default .if !defined(NO_MANCOMPRESS) MANEXT= .gz .endif .if (defined(MLINKS) || defined(_MLINKS_PREPEND)) && !defined(_MLINKS) __pmlinks!= ${ECHO_CMD} '${MLINKS:S/ / /}' | ${AWK} \ '{ if (NF % 2 != 0) { print "broken"; exit; } \ for (i=1; i<=NF; i++) { \ if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \ { $$i = $$(i-2); printf " " $$i " "; } \ else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \ printf " " $$i " "; \ else \ { print "broken"; exit; } \ } \ }' | ${SED} -e 's \([^/ ][^ ]*\.\(.\)[^. ]*\) $${MAN\2PREFIX}/$$$$$$$${__lang}/man\2/\1${MANEXT}g' -e 's/ //g' -e 's/MANlPREFIX/MANLPREFIX/g' -e 's/MANnPREFIX/MANNPREFIX/g' .if ${__pmlinks:Mbroken} == "broken" check-makevars:: @${ECHO_MSG} "${PKGNAME}: Makefile error: unable to parse MLINKS." @${FALSE} .endif _MLINKS= ${_MLINKS_PREPEND} .for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%} .for ___pmlinks in ${__pmlinks} .for __lang in ${lang} _MLINKS+= ${___pmlinks:S// /g} .endfor .endfor .endfor .endif _COUNT=0 .for ___tpmlinks in ${_MLINKS} .if ${_COUNT} == "1" _TMLINKS+= ${___tpmlinks} _COUNT=0 .else _COUNT=1 .endif .endfor .for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%} .for sect in 1 2 3 4 5 6 7 8 9 L N # MAN${sect} is for man pages installed for all languages in MANLANG for a given # section. .if defined(MAN${sect}) _MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%} .endif # Language specific MAN${sect} variables are for man pages installed in that # language, but not necessarily all languages in MANLANG. .if defined(MAN${sect}_${manlang:S%^man/%%:U}) _MANPAGES+= ${MAN${sect}_${manlang:S%^man/%%:U}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%} .endif .endfor .endfor # Special case for English, since it is defined with "" in MANLANG rather than # a language name and does not have man pages installed in a lang subdirectory # of MAN${sect}PREFIX. .for sect in 1 2 3 4 5 6 7 8 9 L N .if defined(MAN${sect}_EN) _MANPAGES+= ${MAN${sect}_EN:S%^%${MAN${sect}PREFIX}/man/man${sect:L}/%} .endif .endfor .if !defined(_TMLINKS) _TMLINKS= .endif .if defined(_MANPAGES) .if defined(NO_MANCOMPRESS) __MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%} .else __MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%:S%$%.gz%} .endif .if ${MANCOMPRESSED} == "yes" _MANPAGES:= ${_MANPAGES:S%$%.gz%} .endif .endif .if ${PREFIX} == /usr INFO_PATH?= share/info .else INFO_PATH?= info .endif .if defined(INFO) . for D in ${INFO:H} RD:= ${D} . if ${RD} != "." . if !defined(INFO_SUBDIR) INFO_SUBDIR:= ${RD} . elif ${INFO_SUBDIR} != ${RD} BROKEN= only one subdirectory in INFO is allowed . endif . endif .undef RD . endfor .endif DOCSDIR_REL?= ${DOCSDIR:S,^${PREFIX}/,,} EXAMPLESDIR_REL?= ${EXAMPLESDIR:S,^${PREFIX}/,,} DATADIR_REL?= ${DATADIR:S,^${PREFIX}/,,} WWWDIR_REL?= ${WWWDIR:S,^${PREFIX}/,,} ETCDIR_REL?= ${ETCDIR:S,^${PREFIX}/,,} PLIST_SUB+= DOCSDIR="${DOCSDIR_REL}" \ EXAMPLESDIR="${EXAMPLESDIR_REL}" \ DATADIR="${DATADIR_REL}" \ WWWDIR="${WWWDIR_REL}" \ ETCDIR="${ETCDIR_REL}" DESKTOPDIR?= ${PREFIX}/share/applications _DESKTOPDIR_REL= ${DESKTOPDIR:S,^${PREFIX}/,,}/ .if ${_DESKTOPDIR_REL} == ${DESKTOPDIR}/ # DESKTOPDIR is not beneath PREFIX _DESKTOPDIR_REL= .endif .MAIN: all ################################################################ # Many ways to disable a port. # # If we're in BATCH mode and the port is interactive, or we're # in interactive mode and the port is non-interactive, skip all # the important targets. The reason we have two modes is that # one might want to leave a build in BATCH mode running # overnight, then come back in the morning and do _only_ the # interactive ones that required your intervention. # # Ignore ports that can't be resold if building for a CDROM. # # Don't build a port if it's restricted and we don't want to get # into that. # # Don't build a port if it's broken, unless we're running a parallel # build (in case it's fixed). # # Don't build a port if it's forbidden for whatever reason. # # Don't build a port if the system is too old. ################################################################ # Check the machine architectures .if defined(ONLY_FOR_ARCHS) .for __ARCH in ${ONLY_FOR_ARCHS} .if ${ARCH:M${__ARCH}} != "" __ARCH_OK?= 1 .endif .endfor .else __ARCH_OK?= 1 .endif .if defined(NOT_FOR_ARCHS) .for __NARCH in ${NOT_FOR_ARCHS} .if ${ARCH:M${__NARCH}} != "" .undef __ARCH_OK .endif .endfor .endif .if !defined(__ARCH_OK) .if defined(ONLY_FOR_ARCHS) IGNORE= is only for ${ONLY_FOR_ARCHS}, .else # defined(NOT_FOR_ARCHS) IGNORE= does not run on ${NOT_FOR_ARCHS}, .endif IGNORE+= while you are running ${ARCH} .if defined(ONLY_FOR_ARCHS_REASON_${ARCH}) IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON_${ARCH}}) .elif defined(ONLY_FOR_ARCHS_REASON) IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON}) .endif .if defined(NOT_FOR_ARCHS_REASON_${ARCH}) IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON_${ARCH}}) .elif defined(NOT_FOR_ARCHS_REASON) IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON}) .endif .endif # Check the user interaction and legal issues .if !defined(NO_IGNORE) .if (defined(IS_INTERACTIVE) && defined(BATCH)) IGNORE= is an interactive port .elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) IGNORE= is not an interactive port .elif (defined(NO_CDROM) && defined(FOR_CDROM)) IGNORE= may not be placed on a CDROM: ${NO_CDROM} .elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) IGNORE= is restricted: ${RESTRICTED} .elif defined(BROKEN) .if !defined(TRYBROKEN) IGNORE= is marked as broken: ${BROKEN} .endif .elif defined(FORBIDDEN) IGNORE= is forbidden: ${FORBIDDEN} .endif .if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING)) IGNORE= has to be built manually: ${MANUAL_PACKAGE_BUILD} clean: @${IGNORECMD} .endif .if defined(IGNORE) .if defined(IGNORE_SILENT) IGNORECMD= ${DO_NADA} .else IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} "${IGNORE:Q}.;exit 1 .endif .for target in check-sanity fetch checksum extract patch configure all build install reinstall package .if !target(${target}) ${target}: @${IGNORECMD} .if defined(INSTALLS_DEPENDS) @${FALSE} .endif .endif .endfor .endif .endif .if defined(IGNORE) || defined(NO_PACKAGE) ignorelist: package-name .else ignorelist: @${DO_NADA} .endif .if defined(IGNORE) || defined(NO_PACKAGE) ignorelist-verbose: .if defined(IGNORE) @${ECHO_CMD} "${PKGNAME}|IGNORE: "${IGNORE:Q} .else @${ECHO_CMD} "${PKGNAME}|NO_PACKAGE: "${NO_PACKAGE:Q} .endif .else ignorelist-verbose: @${DO_NADA} .endif ################################################################ # Clean directories for ftp or CDROM. ################################################################ .if !defined(LICENSE) .if defined(RESTRICTED) clean-restricted: delete-distfiles delete-package clean-restricted-list: delete-distfiles-list delete-package-list RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES} .else clean-restricted: clean-restricted-list: .endif .if defined(NO_CDROM) clean-for-cdrom: delete-distfiles delete-package clean-for-cdrom-list: delete-distfiles-list delete-package-list RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES} .else clean-for-cdrom: clean-for-cdrom-list: .endif .endif # !defined(LICENSE) .if defined(ALL_HOOK) all: @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \ DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \ PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \ FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \ BUILD_DEPENDS="${BUILD_DEPENDS}" RUN_DEPENDS="${RUN_DEPENDS}" \ CONFLICTS="${CONFLICTS}" \ ${ALL_HOOK} .endif .if !target(all) all: build .endif .if !defined(DEPENDS_TARGET) .if defined(DEPENDS_PRECLEAN) DEPENDS_TARGET= clean DEPENDS_ARGS= NOCLEANDEPENDS=yes .endif .if make(reinstall) DEPENDS_TARGET+= reinstall .else DEPENDS_TARGET+= install .endif .if defined(DEPENDS_CLEAN) DEPENDS_TARGET+= clean DEPENDS_ARGS+= NOCLEANDEPENDS=yes .endif .endif ################################################################ # # Do preliminary work to detect if we need to run the config # target or not. # ################################################################ .if ((!defined(OPTIONS_DEFINE) && !defined(OPTIONS_SINGLE) && !defined(OPTIONS_MULTI)) \ && !defined(OPTIONS_GROUP) && !defined(OPTIONS_RADIO) \ || defined(CONFIG_DONE_${UNIQUENAME:U}) || \ defined(PACKAGE_BUILDING) || defined(BATCH)) _OPTIONS_OK=yes .endif ################################################################ # The following are used to create easy dummy targets for # disabling some bit of default target behavior you don't want. # They still check to see if the target exists, and if so don't # do anything, since you might want to set this globally for a # group of ports in a Makefile.inc, but still be able to # override from an individual Makefile. ################################################################ # Disable checksum .if defined(NO_CHECKSUM) && !target(checksum) checksum: fetch @${DO_NADA} .endif # Disable build .if defined(NO_BUILD) && !target(build) build: configure @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE} .endif # Disable install .if defined(NO_INSTALL) && !target(do-install) do-install: @${DO_NADA} .endif # Disable package .if defined(NO_PACKAGE) && !target(package) package: .if defined(IGNORE_SILENT) @${DO_NADA} .else @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: "${NO_PACKAGE:Q}. .endif .endif # Disable describe .if defined(NO_DESCRIBE) && !target(describe) describe: @${DO_NADA} .endif ################################################################ # More standard targets start here. # # These are the body of the build/install framework. If you are # not happy with the default actions, and you can't solve it by # adding pre-* or post-* targets/scripts, override these. ################################################################ # Pre-everything pre-everything:: @${DO_NADA} buildanyway-message: .if defined(TRYBROKEN) && defined(BROKEN) @${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN." .else @${DO_NADA} .endif options-message: .if defined(GNOME_OPTION_MSG) && (!defined(PACKAGE_BUILDING) || !defined(BATCH)) @for m in ${GNOME_OPTION_MSG}; do \ ${ECHO_MSG} $$m; \ done .else @${DO_NADA} .endif .if defined(_OPTIONS_READ) @${ECHO_MSG} "===> Found saved configuration for ${_OPTIONS_READ}" .endif # Warn user about deprecated packages. Advisory only. .if !target(check-deprecated) check-deprecated: .if defined(DEPRECATED) @${ECHO_MSG} "===> NOTICE:" @${ECHO_MSG} @${ECHO_MSG} "This port is deprecated; you may wish to reconsider installing it:" @${ECHO_MSG} @${ECHO_MSG} ${DEPRECATED:Q}. @${ECHO_MSG} .if defined(EXPIRATION_DATE) @${ECHO_MSG} "It is scheduled to be removed on or after ${EXPIRATION_DATE}." @${ECHO_MSG} .endif .endif .endif # Check if the port is listed in the vulnerability database .if defined(WITH_PKGNG) AUDITFILE?= ${PKG_DBDIR}/auditfile _EXTRACT_AUDITFILE= ${CAT} "${AUDITFILE}" .else AUDITFILE?= /var/db/portaudit/auditfile.tbz _EXTRACT_AUDITFILE= ${TAR} -jxOf "${AUDITFILE}" auditfile .endif check-vulnerable: .if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING) @if [ -f "${AUDITFILE}" ]; then \ if [ -n "${WITH_PKGNG}" ]; then \ if [ -x "${PKG_BIN}" ]; then \ vlist=`${PKG_BIN} audit "${PKGNAME}"`; \ elif [ "${PORTNAME}" = "pkg" ]; then \ vlist=""; \ else \ ${ECHO_MSG} "===> Unable to check vuln database as pkg(8) is missing"; \ exit 1; \ fi; \ elif [ -x "${LOCALBASE}/sbin/portaudit" ]; then \ vlist=`${LOCALBASE}/sbin/portaudit -X 14 "${PKGNAME}" \ 2>&1 | grep -vE '^[0-9]+ problem\(s\) found.' \ || true`; \ else \ ${ECHO_MSG} "===> portaudit database exists, however, portaudit is not installed!"; \ fi; \ if [ -n "$$vlist" ]; then \ ${ECHO_MSG} "===> ${PKGNAME} has known vulnerabilities:"; \ ${ECHO_MSG} "$$vlist"; \ ${ECHO_MSG} "=> Please update your ports tree and try again."; \ exit 1; \ fi; \ fi .endif # set alg to any of SIZE, SHA256 (or any other checksum algorithm): DISTINFO_DATA?= if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${DISTINFO_FILE}" ]; then exit; fi; \ DIR=${DIST_SUBDIR}; ${AWK} -v alg=$$alg -v file=$${DIR:+$$DIR/}$${file} \ '$$1 == alg && $$2 == "(" file ")" {print $$4}' ${DISTINFO_FILE} # Fetch .if !target(do-fetch) do-fetch: @${MKDIR} ${_DISTDIR} @cd ${_DISTDIR};\ ${_MASTER_SITES_ENV} ; \ for _file in ${DISTFILES}; do \ file=$${_file%%:*}; \ if [ $$_file = $$file ]; then \ select=''; \ else \ select=`${ECHO_CMD} $${_file##*:} | ${SED} -e 's/,/ /g'` ; \ fi; \ force_fetch=false; \ filebasename=$${file##*/}; \ for afile in ${FORCE_FETCH}; do \ afile=$${afile##*/}; \ if [ "x$$afile" = "x$$filebasename" ]; then \ force_fetch=true; \ fi; \ done; \ if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \ if [ -L $$file -o -L $$filebasename ]; then \ ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \ ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ ${ECHO_MSG} "=> Please correct this problem and try again."; \ exit 1; \ fi; \ if [ -f ${DISTINFO_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \ _sha256sum=`alg=SHA256; ${DISTINFO_DATA}`; \ if [ -z "$$_sha256sum" ]; then \ ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${DISTINFO_FILE}."; \ ${ECHO_MSG} "=> Either ${DISTINFO_FILE} is out of date, or"; \ ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \ exit 1; \ fi; \ fi; \ ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \ if [ ! -w ${DISTDIR} ]; then \ ${ECHO_MSG} "=> ${DISTDIR} is not writable by you; cannot fetch."; \ exit 1; \ fi; \ if [ ! -z "$$select" ] ; then \ __MASTER_SITES_TMP= ; \ for group in $$select; do \ if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ eval ___MASTER_SITES_TMP="\$${_MASTER_SITES_$${group}}" ; \ __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ fi; \ done; \ ___MASTER_SITES_TMP= ; \ SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ else \ SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ fi; \ for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \ CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ case $${file} in \ */*) ${MKDIR} $${file%/*}; \ args="-o $${file} $${site}$${file}";; \ *) args=$${site}$${file};; \ esac; \ if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \ continue 2; \ fi; \ done; \ ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\ ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \ exit 1; \ fi; \ done .if defined(PATCHFILES) @cd ${_DISTDIR};\ ${_PATCH_SITES_ENV} ; \ for _file in ${PATCHFILES}; do \ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ force_fetch=false; \ filebasename=$${file##*/}; \ for afile in ${FORCE_FETCH}; do \ afile=$${afile##*/}; \ if [ "x$$afile" = "x$$filebasename" ]; then \ force_fetch=true; \ fi; \ done; \ if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \ if [ -L $$file -o -L $${file##*/} ]; then \ ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \ ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ ${ECHO_MSG} "=> Please correct this problem and try again."; \ exit 1; \ fi; \ ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \ if [ ! -z "$$select" ] ; then \ __PATCH_SITES_TMP= ; \ for group in $$select; do \ if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ eval ___PATCH_SITES_TMP="\$${_PATCH_SITES_$${group}}" ; \ __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ fi; \ done; \ ___PATCH_SITES_TMP= ; \ SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ else \ SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ fi; \ for site in `eval $$SORTED_PATCH_SITES_CMD_TMP`; do \ ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \ CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ case $${file} in \ */*) ${MKDIR} $${file%/*}; \ args="-o $${file} $${site}$${file}";; \ *) args=$${site}$${file};; \ esac; \ if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \ continue 2; \ fi; \ done; \ ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\ ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \ exit 1; \ fi; \ done .endif .endif # Extract .if !target(do-extract) do-extract: @${RM} -rf ${WRKDIR} @${MKDIR} ${WRKDIR} @for file in ${EXTRACT_ONLY}; do \ if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\ then \ exit 1; \ fi; \ done .if !defined(EXTRACT_PRESERVE_OWNERSHIP) @if [ ${UID} = 0 ]; then \ ${CHMOD} -R ug-s ${WRKDIR}; \ ${CHOWN} -R 0:0 ${WRKDIR}; \ fi .endif .endif # Patch .if !target(patch-dos2unix) patch-dos2unix: .if defined(USE_DOS2UNIX) .if ${USE_DOS2UNIX:U}=="YES" @${ECHO_MSG} "===> Converting DOS text files to UNIX text files" @${FIND} -E ${WRKSRC} -type f -iregex '${DOS2UNIX_REGEX}' -print0 | \ ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/ $$//' .else @${ECHO_MSG} "===> Converting DOS text file to UNIX text file: ${f}" .if ${USE_DOS2UNIX:M*/*} .for f in ${USE_DOS2UNIX} @${REINPLACE_CMD} -i '' -e 's/ $$//' ${WRKSRC}/${f} .endfor .else .for f in ${USE_DOS2UNIX} @${FIND} ${WRKSRC} -type f -name '${f}' -print0 | \ ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/ $$//' .endfor .endif .endif .else @${DO_NADA} .endif .endif .if !target(do-patch) do-patch: .if defined(PATCHFILES) @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}" @(cd ${_DISTDIR}; \ for i in ${_PATCHFILES}; do \ if [ ${PATCH_DEBUG_TMP} = yes ]; then \ ${ECHO_MSG} "===> Applying distribution patch $$i" ; \ fi; \ case $$i in \ *.Z|*.gz) \ ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \ ;; \ *.bz2) \ ${BZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \ ;; \ *) \ ${PATCH} ${PATCH_DIST_ARGS} < $$i; \ ;; \ esac; \ done) .endif .if defined(EXTRA_PATCHES) @for i in ${EXTRA_PATCHES}; do \ ${ECHO_MSG} "===> Applying extra patch $$i"; \ ${PATCH} ${PATCH_ARGS} < $$i; \ done .endif @if [ -d ${PATCHDIR} ]; then \ if [ "`${ECHO_CMD} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \ ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \ PATCHES_APPLIED="" ; \ for i in ${PATCHDIR}/patch-*; do \ case $$i in \ *.orig|*.rej|*~|*,v) \ ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \ ;; \ *) \ if [ ${PATCH_DEBUG_TMP} = yes ]; then \ ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \ fi; \ if ${PATCH} ${PATCH_ARGS} < $$i ; then \ PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \ else \ ${ECHO_MSG} `${ECHO_CMD} "=> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \ if [ x"$$PATCHES_APPLIED" != x"" ]; then \ ${ECHO_MSG} `${ECHO_CMD} "=> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \ fi; \ ${FALSE} ; \ fi; \ ;; \ esac; \ done; \ fi; \ fi .endif .if !target(run-autotools-fixup) run-autotools-fixup: # Work around an issue where FreeBSD 10.0 is detected as FreeBSD 1.x. .if ${OSVERSION} >= 1000000 && !defined(WITHOUT_FBSD10_FIX) -@for f in `${FIND} ${WRKDIR} -type f \( -name config.libpath -o \ -name config.rpath -o -name configure -o -name libtool.m4 -o \ -name ltconfig -o -name libtool -o -name aclocal.m4 -o \ -name acinclude.m4 \)` ; do \ ${SED} -i.fbsd10bak \ -e 's|freebsd1\*)|freebsd1.\*)|g' \ -e 's|freebsd\[12\]\*)|freebsd[12].*)|g' \ -e 's|freebsd\[123\]\*)|freebsd[123].*)|g' \ -e 's|freebsd\[\[12\]\]\*)|freebsd[[12]].*)|g' \ -e 's|freebsd\[\[123\]\]\*)|freebsd[[123]].*)|g' \ $${f} ; \ ${TOUCH} ${TOUCH_FLAGS} -mr $${f}.fbsd10bak $${f} ; \ ${RM} -f $${f}.fbsd10bak ; \ ${ECHO_MSG} "===> FreeBSD 10 autotools fix applied to $${f}"; \ done .endif .endif .if !target(configure-autotools) configure-autotools: @${DO_NADA} .endif .if !target(run-autotools) run-autotools: @${DO_NADA} .endif # Configure .if !target(do-configure) do-configure: @if [ -f ${SCRIPTDIR}/configure ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/configure; \ fi .if defined(GNU_CONFIGURE) @CONFIG_GUESS_DIRS=$$(${FIND} ${WRKDIR} -name config.guess -o -name config.sub \ | ${XARGS} -n 1 ${DIRNAME}); \ for _D in $${CONFIG_GUESS_DIRS}; do \ ${CP} -f ${TEMPLATES}/config.guess $${_D}/config.guess; \ ${CHMOD} a+rx $${_D}/config.guess; \ ${CP} -f ${TEMPLATES}/config.sub $${_D}/config.sub; \ ${CHMOD} a+rx $${_D}/config.sub; \ done .endif .if defined(HAS_CONFIGURE) @(cd ${CONFIGURE_WRKSRC} && \ ${SET_LATE_CONFIGURE_ARGS} \ if ! ${SETENV} CC="${CC}" CPP="${CPP}" CXX="${CXX}" \ CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS}" CXXFLAGS="${CXXFLAGS}" \ LDFLAGS="${LDFLAGS}" \ INSTALL="/usr/bin/install -c ${_BINOWNGRP}" \ INSTALL_DATA="${INSTALL_DATA}" \ INSTALL_LIB="${INSTALL_LIB}" \ INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \ ${ECHO_MSG} "===> Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \ (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \ ${FALSE}; \ fi) .endif .if defined(USE_IMAKE) @(cd ${CONFIGURE_WRKSRC}; ${SETENV} ${MAKE_ENV} ${XMKMF}) .endif .endif # Build .if !target(do-build) do-build: .if defined(USE_GMAKE) @(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \ if [ x != x${BUILD_FAIL_MESSAGE} ] ; then \ ${ECHO_MSG} "===> Compilation failed unexpectedly."; \ (${ECHO_CMD} ${BUILD_FAIL_MESSAGE}) | ${FMT} 75 79 ; \ fi; \ ${FALSE}; \ fi) .else @(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \ if [ x != x${BUILD_FAIL_MESSAGE} ] ; then \ ${ECHO_MSG} "===> Compilation failed unexpectedly."; \ (${ECHO_CMD} ${BUILD_FAIL_MESSAGE}) | ${FMT} 75 79 ; \ fi; \ ${FALSE}; \ fi) .endif .endif # Check conflicts .if !target(check-conflicts) check-conflicts: check-build-conflicts check-install-conflicts .endif .if !target(check-build-conflicts) check-build-conflicts: .if ( defined(CONFLICTS) || defined(CONFLICTS_BUILD) ) && !defined(DISABLE_CONFLICTS) && !defined(DEFER_CONFLICTS_CHECK) @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ conflicts_with=; \ for entry in $${found}; do \ if ${PKG_INFO} -e $${entry} ; then \ prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ conflicts_with="$${conflicts_with} $${entry}"; \ fi; \ fi; \ done; \ if [ -n "$${conflicts_with}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ for entry in $${conflicts_with}; do \ ${ECHO_MSG} " $${entry}"; \ done; \ ${ECHO_MSG}; \ ${ECHO_MSG} " They will not build together."; \ ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \ exit 1; \ fi .endif .endif .if !target(identify-install-conflicts) identify-install-conflicts: .if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) ) && !defined(DISABLE_CONFLICTS) @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ conflicts_with=; \ for entry in $${found}; do \ if ${PKG_INFO} -e $${entry} ; then \ prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ conflicts_with="$${conflicts_with} $${entry}"; \ fi; \ fi; \ done; \ if [ -n "$${conflicts_with}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ for entry in $${conflicts_with}; do \ ${ECHO_MSG} " $${entry}"; \ done; \ ${ECHO_MSG}; \ ${ECHO_MSG} " They install files into the same place."; \ ${ECHO_MSG} " You may want to stop build with Ctrl + C."; \ sleep 10; \ fi .endif .endif .if !target(check-install-conflicts) check-install-conflicts: .if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) || ( defined(CONFLICTS_BUILD) && defined(DEFER_CONFLICTS_CHECK) ) ) && !defined(DISABLE_CONFLICTS) .if defined(DEFER_CONFLICTS_CHECK) @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ conflicts_with=; \ for entry in $${found}; do \ if ${PKG_INFO} -e $${entry} ; then \ prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ conflicts_with="$${conflicts_with} $${entry}"; \ fi; \ fi; \ done; \ if [ -n "$${conflicts_with}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ for entry in $${conflicts_with}; do \ ${ECHO_MSG} " $${entry}"; \ done; \ ${ECHO_MSG}; \ ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \ exit 1; \ fi .else @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ conflicts_with=; \ for entry in $${found}; do \ if ${PKG_INFO} -e $${entry} ; then \ prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ conflicts_with="$${conflicts_with} $${entry}"; \ fi; \ fi; \ done; \ if [ -n "$${conflicts_with}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ for entry in $${conflicts_with}; do \ ${ECHO_MSG} " $${entry}"; \ done; \ ${ECHO_MSG}; \ ${ECHO_MSG} " They install files into the same place."; \ ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \ exit 1; \ fi .endif # defined(DEFER_CONFLICTS_CHECK) .endif .endif # Install .if !target(do-install) do-install: .if defined(USE_GMAKE) @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET}) .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man) .endif .else # !defined(USE_GMAKE) @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET}) .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man) .endif .endif .endif # Package .if !target(do-package) do-package: ${TMPPLIST} @if [ -d ${PACKAGES} ]; then \ if [ ! -d ${PKGREPOSITORY} ]; then \ if ! ${MKDIR} ${PKGREPOSITORY}; then \ ${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \ exit 1; \ fi; \ fi; \ fi @if ${PKG_CMD} -b ${PKGNAME} ${PKGFILE}; then \ if [ -d ${PACKAGES} ]; then \ cd ${.CURDIR} && eval ${MAKE} package-links; \ fi; \ else \ cd ${.CURDIR} && eval ${MAKE} delete-package; \ exit 1; \ fi .endif # Some support rules for do-package .if !target(package-links) package-links: delete-package-links @for cat in ${CATEGORIES}; do \ if [ ! -d ${PACKAGES}/$$cat ]; then \ if ! ${MKDIR} ${PACKAGES}/$$cat; then \ ${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \ exit 1; \ fi; \ fi; \ ${LN} -sf `${ECHO_CMD} $$cat | ${SED} -e 'sa[^/]*a..ag'`/${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \ done .if !defined(NO_LATEST_LINK) @if [ ! -d ${PKGLATESTREPOSITORY} ]; then \ if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \ ${ECHO_MSG} "=> Can't create directory ${PKGLATESTREPOSITORY}."; \ exit 1; \ fi; \ fi @${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE} .endif .endif .if !target(delete-package-links) delete-package-links: @for cat in ${CATEGORIES}; do \ ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \ done .if !defined(NO_LATEST_LINK) @${RM} -f ${PKGLATESTFILE} .endif .endif .if !target(delete-package) delete-package: delete-package-links @${RM} -f ${PKGFILE} .endif .if !target(delete-package-links-list) delete-package-links-list: @for cat in ${CATEGORIES}; do \ ${ECHO_CMD} ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \ done .if !defined(NO_LATEST_LINK) @${ECHO_CMD} ${RM} -f ${PKGLATESTFILE} .endif .endif .if !target(delete-package-list) delete-package-list: delete-package-links-list @${ECHO_CMD} "[ -f ${PKGFILE} ] && (${ECHO_CMD} deleting ${PKGFILE}; ${RM} -f ${PKGFILE})" .endif # Utility targets follow .if !target(check-already-installed) check-already-installed: ${TMPPLIST_SORT} .if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) @${ECHO_MSG} "===> Checking if ${PKGORIGIN} already installed"; \ ${MKDIR} ${PKG_DBDIR}; \ already_installed=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ if [ -n "$${already_installed}" ]; then \ for p in $${already_installed}; do \ prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \ if [ "x${PREFIX}" = "x$${prfx}" ]; then \ df=`${PKG_INFO} -q -f $${p} 2> /dev/null | ${GREP} -v "^@" | ${SORT} -u | ${COMM} -12 - ${TMPPLIST_SORT}`; \ if [ -n "$${df}" ]; then \ found_package=$${p}; \ break; \ fi; \ fi; \ done; \ fi; \ if [ -d ${PKG_DBDIR}/${PKGNAME} -o -n "$${found_package}" ]; then \ if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \ ${ECHO_CMD} "===> ${PKGNAME} is already installed"; \ else \ ${ECHO_CMD} "===> An older version of ${PKGORIGIN} is already installed ($${found_package})"; \ fi; \ ${ECHO_MSG} " You may wish to \`\`make deinstall'' and install this port again"; \ ${ECHO_MSG} " by \`\`make reinstall'' to upgrade it properly."; \ ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGORIGIN}"; \ ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \ ${ECHO_MSG} " in your environment or the \"make install\" command line."; \ exit 1; \ fi .else @${DO_NADA} .endif .endif .if !target(check-umask) check-umask: @if [ `${SH} -c umask` != 0022 ]; then \ ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \ ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \ ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \ fi .endif .if !target(install-mtree) install-mtree: @${MKDIR} ${PREFIX} @if [ ${UID} != 0 ]; then \ if [ -w ${PREFIX}/ ]; then \ ${ECHO_MSG} "Warning: not superuser, you may get some errors during installation."; \ else \ ${ECHO_MSG} "Error: ${PREFIX}/ not writable."; \ ${FALSE}; \ fi; \ fi .if !defined(NO_MTREE) @if [ ${UID} = 0 ]; then \ if [ ! -f ${MTREE_FILE} ]; then \ ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \ ${ECHO_MSG} "Copy it from a suitable location (e.g., ${SRC_BASE}/etc/mtree) and try again."; \ exit 1; \ else \ ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \ if [ ${PREFIX} = ${LOCALBASE} -a "${MTREE_FILE_DEFAULT}" = "yes" ]; then \ cd ${PREFIX}/share/nls; \ for link in POSIX en_US.US-ASCII; \ do \ if [ x"`${READLINK_CMD} $${link}`" != x"C" ]; \ then \ ${LN} -shf C $${link}; \ fi; \ done; \ fi; \ fi; \ else \ ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ ${ECHO_MSG} "You may want to become root and try again to ensure correct permissions."; \ fi .endif .endif .if !target(install-ldconfig-file) install-ldconfig-file: .if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) .if defined(USE_LDCONFIG) .if defined(USE_LINUX_PREFIX) @${ECHO_MSG} "===> Running linux ldconfig" ${LDCONFIG_CMD} .else .if !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Running ldconfig" ${LDCONFIG} -m ${USE_LDCONFIG} .else @${ECHO_MSG} "===> Running ldconfig (errors are ignored)" -${LDCONFIG} -m ${USE_LDCONFIG} .endif .if ${USE_LDCONFIG} != "${PREFIX}/lib" && !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Installing ldconfig configuration file" .if defined(NO_LDCONFIG_MTREE) @${MKDIR} ${PREFIX}/${LDCONFIG_DIR} .endif @${ECHO_CMD} ${USE_LDCONFIG} | ${TR} ' ' '\n' \ > ${PREFIX}/${LDCONFIG_DIR}/${UNIQUENAME} @${ECHO_CMD} "@cwd" >> ${TMPPLIST} @${ECHO_CMD} ${LDCONFIG_DIR}/${UNIQUENAME} >> ${TMPPLIST} .if defined(NO_LDCONFIG_MTREE) @${ECHO_CMD} "@unexec rmdir ${LDCONFIG_DIR} >/dev/null 2>&1 || true" >> ${TMPPLIST} .endif .endif .endif .endif .if defined(USE_LDCONFIG32) .if !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Running ldconfig" ${LDCONFIG} -32 -m ${USE_LDCONFIG32} .else @${ECHO_MSG} "===> Running ldconfig (errors are ignored)" -${LDCONFIG} -32 -m ${USE_LDCONFIG32} .endif .if !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Installing 32-bit ldconfig configuration file" .if defined(NO_LDCONFIG_MTREE) @${MKDIR} ${PREFIX}/${LDCONFIG_32DIR} .endif @${ECHO_CMD} ${USE_LDCONFIG32} | ${TR} ' ' '\n' \ > ${PREFIX}/${LDCONFIG32_DIR}/${UNIQUENAME} @${ECHO_CMD} "@cwd" >> ${TMPPLIST} @${ECHO_CMD} ${LDCONFIG32_DIR}/${UNIQUENAME} >> ${TMPPLIST} .if defined(NO_LDCONFIG_MTREE) @${ECHO_CMD} "@unexec rmdir ${LDCONFIG32_DIR} >/dev/null 2>&1" >> ${TMPPLIST} .endif .endif .endif .if defined(INSTALLS_SHLIB) @${ECHO_MSG} "INSTALLS_SHLIB is deprecated. Use USE_LDCONFIG instead." .endif .endif .endif .if !target(create-users-groups) create-users-groups: .if defined(GROUPS) || defined(USERS) .if defined(GROUPS) .for _file in ${GID_FILES} .if !exists(${_file}) @${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1 .endif .endfor @${ECHO_MSG} "===> Creating users and/or groups." @${ECHO_CMD} "@exec echo \"===> Creating users and/or groups.\"" >> ${TMPPLIST} .for _group in ${GROUPS} # _bgpd:*:130: @if ! ${GREP} -h ^${_group}: ${GID_FILES} >/dev/null 2>&1; then \ ${ECHO_CMD} "** Cannot find any information about group \`${_group}' in ${GID_FILES}."; \ exit 1; \ fi @IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \ gid=$$(($$gid+${GID_OFFSET})); \ if ! ${PW} groupshow $$group >/dev/null 2>&1; then \ ${ECHO_MSG} "Creating group \`$$group' with gid \`$$gid'."; \ ${PW} groupadd $$group -g $$gid; \ else \ ${ECHO_MSG} "Using existing group \`$$group'."; \ fi; \ ${ECHO_CMD} "@exec if ! ${PW} groupshow $$group >/dev/null 2>&1; then \ echo \"Creating group '$$group' with gid '$$gid'.\"; \ ${PW} groupadd $$group -g $$gid; else echo \"Using existing group '$$group'.\"; fi" >> ${TMPPLIST}; \ done .endfor .endif .if defined(USERS) .for _file in ${UID_FILES} .if !exists(${_file}) @${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1 .endif .endfor .for _user in ${USERS} # _bgpd:*:130:130:BGP Daemon:/var/empty:/sbin/nologin @if ! ${GREP} -h ^${_user}: ${UID_FILES} >/dev/null 2>&1; then \ ${ECHO_CMD} "** Cannot find any information about user \`${_user}' in ${UID_FILES}."; \ exit 1; \ fi @IFS=":"; ${GREP} -h ^${_user}: ${UID_FILES} | head -n 1 | while read login passwd uid gid class change expire gecos homedir shell; do \ uid=$$(($$uid+${UID_OFFSET})); \ gid=$$(($$gid+${GID_OFFSET})); \ class="$${class:+-L }$$class"; \ homedir=$$(echo $$homedir | sed "s|^/usr/local|${PREFIX}|"); \ if ! ${PW} usershow $$login >/dev/null 2>&1; then \ ${ECHO_MSG} "Creating user \`$$login' with uid \`$$uid'."; \ eval ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \ case $$homedir in /nonexistent|/var/empty) ;; *) ${INSTALL} -d -g $$gid -o $$uid $$homedir;; esac; \ else \ ${ECHO_MSG} "Using existing user \`$$login'."; \ fi; \ ${ECHO_CMD} "@exec if ! ${PW} usershow $$login >/dev/null 2>&1; then \ echo \"Creating user '$$login' with uid '$$uid'.\"; \ ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \ else echo \"Using existing user '$$login'.\"; fi" >> ${TMPPLIST}; \ case $$homedir in /nonexistent|/var/empty) ;; *) ${ECHO_CMD} "@exec ${INSTALL} -d -g $$gid -o $$uid $$homedir" >> ${TMPPLIST};; esac; \ done .endfor .if defined(GROUPS) .for _group in ${GROUPS} # mail:*:6:postfix,clamav @IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \ gid=$$(($$gid+${GID_OFFSET})); \ IFS=","; for _login in $$members; do \ for _user in ${USERS}; do \ if [ "x$${_user}" = "x$${_login}" ]; then \ if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \ ${ECHO_MSG} "Adding user \`$${_login}' to group \`${_group}'."; \ ${PW} groupmod ${_group} -m $${_login}; \ fi; \ ${ECHO_CMD} "@exec if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \ echo \"Adding user '$${_login}' to group '${_group}'.\"; \ ${PW} groupmod ${_group} -m $${_login}; fi" >> ${TMPPLIST}; \ fi; \ done; \ done; \ done .endfor .endif .if defined(USERS) .for _user in ${USERS} @if [ ! ${USERS_BLACKLIST:M${_user}} ]; then \ ${ECHO_CMD} "@unexec if ${PW} usershow ${_user} >/dev/null 2>&1; then \ echo \"==> You should manually remove the \\\"${_user}\\\" user. \"; fi" >> ${TMPPLIST}; \ fi .endfor .endif .endif .else @${DO_NADA} .endif .endif # PR ports/152498 # XXX Make sure the commands to create group(s) # and user(s) are the first in pkg-plist .if !target(fix-plist-sequence) fix-plist-sequence: ${TMPPLIST} .if defined(GROUPS) || defined(USERS) @${ECHO_CMD} "===> Correct pkg-plist sequence to create group(s) and user(s)" @${EGREP} -e '^@exec echo.*Creating users and' -e '^@exec.*${PW}' -e '^@exec ${INSTALL} -d -g' ${TMPPLIST} > ${TMPGUCMD} @${EGREP} -v -e '^@exec echo.*Creating users and' -e '^@exec.*${PW}' -e '^@exec ${INSTALL} -d -g' ${TMPPLIST} >> ${TMPGUCMD} @${MV} -f ${TMPGUCMD} ${TMPPLIST} .endif .endif .if !defined(DISABLE_SECURITY_CHECK) .if !target(security-check) security-check: # Scan PLIST for: # 1. setugid files # 2. accept()/recvfrom() which indicates network listening capability # 3. insecure functions (gets/mktemp/tempnam/[XXX]) # 4. startup scripts, in conjunction with 2. # 5. world-writable files/dirs # -@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable ${WRKDIR}/.PLIST.objdump; \ ${AWK} -v prefix='${PREFIX}' ' \ match($$0, /^@cwd /) { prefix = substr($$0, RSTART + RLENGTH); if (prefix == "/") prefix=""; next; } \ /^@/ { next; } \ /^\// { print; next; } \ { print prefix "/" $$0; } \ ' ${TMPPLIST} > ${WRKDIR}/.PLIST.flattened; \ ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2> /dev/null > ${WRKDIR}/.PLIST.setuid; \ ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ | ${XARGS} -0 -J % ${FIND} % -prune -perm -0002 \! -type l 2> /dev/null > ${WRKDIR}/.PLIST.writable; \ ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f -print0 2> /dev/null \ | ${XARGS} -0 -n 1 ${OBJDUMP} -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \ if \ ! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${PORTSDIR}/Tools/scripts/security-check.awk \ ${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.objdump ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \ then \ www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \ if [ ! -z "$${www_site}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} " For more information, and contact details about the security"; \ ${ECHO_MSG} " status of this software, see the following webpage: "; \ ${ECHO_MSG} "$${www_site}"; \ fi; \ fi .endif .else # i.e. defined(DISABLE_SECURITY_CHECK) security-check: @${ECHO_MSG} " WARNING: Security check has been disabled." .endif # !defined(DISABLE_SECURITY_CHECK) ################################################################ # Skeleton targets start here # # You shouldn't have to change these. Either add the pre-* or # post-* targets/scripts or redefine the do-* targets. These # targets don't do anything other than checking for cookies and # call the necessary targets/scripts. ################################################################ # Please note that the order of the following targets is important, and # should not be modified. .if defined(CHROOTED) _CHROOT_SEQ= post-chroot .else _CHROOT_SEQ= .endif _SANITY_SEQ= ${_CHROOT_SEQ} pre-everything check-makefile \ check-categories check-makevars check-desktop-entries \ check-depends identify-install-conflicts check-deprecated \ check-vulnerable check-license check-config buildanyway-message \ options-message _PKG_DEP= check-sanity _PKG_SEQ= pkg-depends _FETCH_DEP= pkg _FETCH_SEQ= fetch-depends pre-fetch pre-fetch-script \ do-fetch fetch-specials post-fetch post-fetch-script _EXTRACT_DEP= fetch _EXTRACT_SEQ= check-build-conflicts extract-message checksum extract-depends \ pre-extract pre-extract-script do-extract \ post-extract post-extract-script _PATCH_DEP= extract _PATCH_SEQ= ask-license patch-message patch-depends patch-dos2unix pre-patch \ pre-patch-script do-patch post-patch post-patch-script _CONFIGURE_DEP= patch _CONFIGURE_SEQ= build-depends lib-depends configure-message run-autotools-fixup \ configure-autotools pre-configure pre-configure-script \ run-autotools do-configure post-configure post-configure-script _BUILD_DEP= configure _BUILD_SEQ= build-message pre-build pre-build-script do-build \ post-build post-build-script _INSTALL_DEP= build _INSTALL_SEQ= install-message check-install-conflicts run-depends lib-depends apply-slist pre-install \ pre-install-script generate-plist check-already-installed _INSTALL_SUSEQ= check-umask install-mtree pre-su-install \ pre-su-install-script create-users-groups do-install \ install-desktop-entries install-license install-rc-script \ post-install post-install-script add-plist-buildinfo \ add-plist-info add-plist-docs add-plist-examples \ add-plist-data add-plist-post fix-plist-sequence \ compress-man install-ldconfig-file fake-pkg security-check _PACKAGE_DEP= install _PACKAGE_SEQ= package-message pre-package pre-package-script \ do-package post-package-script .if !target(post-chroot) post-chroot: @${DO_NADA} .endif .if !target(check-sanity) check-sanity: ${_SANITY_SEQ} .endif # XXX MCL might need to move in loop below? .if !target(fetch) fetch: ${_FETCH_DEP} ${_FETCH_SEQ} .endif .if !target(pkg) pkg: ${_PKG_DEP} ${_PKG_SEQ} .endif # Main logic. The loop generates 6 main targets and using cookies # ensures that those already completed are skipped. .for target in extract patch configure build install package .if !target(${target}) && defined(_OPTIONS_OK) ${target}: ${${target:U}_COOKIE} .elif !target(${target}) ${target}: config-conditional @cd ${.CURDIR} && ${MAKE} CONFIG_DONE_${UNIQUENAME:U}=1 ${${target:U}_COOKIE} .elif target(${target}) && defined(IGNORE) .endif .if !exists(${${target:U}_COOKIE}) .if ${UID} != 0 && defined(_${target:U}_SUSEQ) && !defined(INSTALL_AS_USER) .if defined(USE_SUBMAKE) ${${target:U}_COOKIE}: ${_${target:U}_DEP} @cd ${.CURDIR} && ${MAKE} ${_${target:U}_SEQ} .else ${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} .endif @${ECHO_MSG} "===> Switching to root credentials for '${target}' target" @cd ${.CURDIR} && \ ${SU_CMD} "${MAKE} ${_${target:U}_SUSEQ}" @${ECHO_MSG} "===> Returning to user credentials" @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} .elif defined(USE_SUBMAKE) ${${target:U}_COOKIE}: ${_${target:U}_DEP} @cd ${.CURDIR} && \ ${MAKE} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ} @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} .else ${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ} @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} .endif .else ${${target:U}_COOKIE}:: @if [ -e ${.TARGET} ]; then \ ${DO_NADA}; \ else \ cd ${.CURDIR} && ${MAKE} ${.TARGET}; \ fi .endif .endfor # Enforce order for -jN builds .ORDER: ${_SANITY_SEQ} .ORDER: ${_PKG_DEP} ${_PKG_SEQ} .ORDER: ${_FETCH_DEP} ${_FETCH_SEQ} .ORDER: ${_EXTRACT_DEP} ${_EXTRACT_SEQ} .ORDER: ${_PATCH_DEP} ${_PATCH_SEQ} .ORDER: ${_CONFIGURE_DEP} ${_CONFIGURE_SEQ} .ORDER: ${_BUILD_DEP} ${_BUILD_SEQ} .ORDER: ${_INSTALL_DEP} ${_INSTALL_SEQ} .ORDER: ${_PACKAGE_DEP} ${_PACKAGE_SEQ} extract-message: @${ECHO_MSG} "===> Extracting for ${PKGNAME}" patch-message: @${ECHO_MSG} "===> Patching for ${PKGNAME}" configure-message: @${ECHO_MSG} "===> Configuring for ${PKGNAME}" build-message: @${ECHO_MSG} "===> Building for ${PKGNAME}" install-message: @${ECHO_MSG} "===> Installing for ${PKGNAME}" package-message: @${ECHO_MSG} "===> Building package for ${PKGNAME}" # Empty pre-* and post-* targets .for stage in pre post .for name in pkg check-sanity fetch extract patch configure build install package .if !target(${stage}-${name}) ${stage}-${name}: @${DO_NADA} .endif .if !target(${stage}-${name}-script) ${stage}-${name}-script: @if [ -f ${SCRIPTDIR}/${.TARGET:S/-script$//} ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/${.TARGET:S/-script$//}; \ fi .endif .endfor .endfor # Special cases for su .if !target(pre-su-install) pre-su-install: @${DO_NADA} .endif .if !target(pre-su-install-script) pre-su-install-script: @${DO_NADA} .endif .if !target(pretty-print-www-site) pretty-print-www-site: @www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \ if [ -n "$${www_site}" ]; then \ ${ECHO_MSG} -n " and/or visit the "; \ ${ECHO_MSG} -n "web site"; \ ${ECHO_MSG} " for further information"; \ fi .endif ################################################################ # Some more targets supplied for users' convenience ################################################################ # Checkpatch # # Special target to verify patches .if !target(checkpatch) checkpatch: @cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${_PATCH_DEP} ${_PATCH_SEQ} .endif # Reinstall # # Special target to re-run install .if !target(reinstall) reinstall: @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} @cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} -DFORCE_PKG_REGISTER install .endif # Deinstall # # Special target to remove installation .if !target(deinstall) deinstall: .if ${UID} != 0 && !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" @cd ${.CURDIR} && \ ${SU_CMD} "${MAKE} ${.TARGET}" @${ECHO_MSG} "===> Returning to user credentials" .else @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}" @found_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ for p in $${found_names}; do \ check_name=`${ECHO_CMD} $${p} | ${SED} -e 's/-[^-]*$$//'`; \ if [ "$${check_name}" = "${PKGBASE}" ]; then \ prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \ if [ "x${PREFIX}" = "x$${prfx}" ]; then \ ${ECHO_MSG} "===> Deinstalling $${p}"; \ ${PKG_DELETE} -f $${p}; \ else \ ${ECHO_MSG} "===> $${p} has a different PREFIX: $${prfx}, skipping"; \ fi; \ fi; \ done; \ if [ -z "$${found_names}" ]; then \ ${ECHO_MSG} "===> ${PKGBASE} not installed, skipping"; \ fi @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} .endif .endif # Deinstall-all # # Special target to remove installation of all ports of the same origin .if !target(deinstall-all) deinstall-all: .if ${UID} != 0 && !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" @cd ${.CURDIR} && \ ${SU_CMD} "${MAKE} ${.TARGET}" @${ECHO_MSG} "===> Returning to user credentials" .else @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}" @deinstall_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ for oldpkgorigin in $$(${GREP} "|${PKGORIGIN}|" ${PORTSDIR}/MOVED | ${CUT} -f 1 -d '|' | ${SORT} -u); do \ deinstall_names="$${deinstall_names} $$(${PKG_INFO} -q -O $${oldpkgorigin})"; \ done; \ if [ -n "$${deinstall_names}" ]; then \ for d in $${deinstall_names}; do \ ${ECHO_MSG} "===> Deinstalling $${d}"; \ ${PKG_DELETE} -f $${d}; \ done; \ else \ ${ECHO_MSG} "===> ${PKGORIGIN} not installed, skipping"; \ fi; \ ${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} .endif .endif # Cleaning up .if !target(do-clean) do-clean: @if [ -d ${WRKDIR} ]; then \ if [ -w ${WRKDIR} ]; then \ ${RM} -rf ${WRKDIR}; \ else \ ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \ fi; \ fi .endif .if !target(clean) clean: .if !defined(NOCLEANDEPENDS) @cd ${.CURDIR} && ${MAKE} limited-clean-depends .endif @${ECHO_MSG} "===> Cleaning for ${PKGNAME}" .if target(pre-clean) @cd ${.CURDIR} && ${MAKE} pre-clean .endif @cd ${.CURDIR} && ${MAKE} do-clean .if target(post-clean) @cd ${.CURDIR} && ${MAKE} post-clean .endif .endif .if !target(pre-distclean) pre-distclean: @${DO_NADA} .endif .if !target(distclean) distclean: pre-distclean clean @cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${_DISTFILES} ${_PATCHFILES}" .endif .if !target(delete-distfiles) delete-distfiles: @${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}" @(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \ cd ${_DISTDIR}; \ for file in ${RESTRICTED_FILES}; do \ ${RM} -f $${file}; \ dir=$${file%/*}; \ if [ "$${dir}" != "$${file}" ]; then \ ${RMDIR} -p $${dir} >/dev/null 2>&1 || :; \ fi; \ done; \ fi) .if defined(DIST_SUBDIR) -@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE} .endif .endif .if !target(delete-distfiles-list) delete-distfiles-list: @${ECHO_CMD} "# ${PKGNAME}" @if [ "X${RESTRICTED_FILES}" != "X" ]; then \ for file in ${RESTRICTED_FILES}; do \ ${ECHO_CMD} "[ -f ${_DISTDIR}/$$file ] && (${ECHO_CMD} deleting ${_DISTDIR}/$$file; ${RM} -f ${_DISTDIR}/$$file)"; \ dir=$${file%/*}; \ if [ "$${dir}" != "$${file}" ]; then \ ${ECHO_CMD} "(cd ${_DISTDIR} && ${RMDIR} -p $${dir} 2>/dev/null)"; \ fi; \ done; \ fi .if defined(DIST_SUBDIR) @${ECHO_CMD} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}" .endif .endif # Prints out a list of files to fetch (useful to do a batch fetch) .if !target(fetch-list) fetch-list: @${MKDIR} ${_DISTDIR} @(cd ${_DISTDIR}; \ ${_MASTER_SITES_ENV} ; \ for _file in ${DISTFILES}; do \ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ if [ ! -f $$file -a ! -f $${file##*/} ]; then \ if [ ! -z "$$select" ] ; then \ __MASTER_SITES_TMP= ; \ for group in $$select; do \ if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \ __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ fi; \ done; \ ___MASTER_SITES_TMP= ; \ SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ else \ SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ fi; \ for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ if [ ! -z "`${ECHO_CMD} ${NOFETCHFILES} | ${GREP} -w $${file}`" ]; then \ if [ -z "`${ECHO_CMD} ${MASTER_SITE_OVERRIDE} | ${GREP} -w $${site}`" ]; then \ continue; \ fi; \ fi; \ DIR=${DIST_SUBDIR};\ CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ case $${file} in \ */*) args="-o $${file} $${site}$${file}";; \ *) args=$${site}$${file};; \ esac; \ ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \ done; \ ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \ fi; \ done) .if defined(PATCHFILES) @(cd ${_DISTDIR}; \ ${_PATCH_SITES_ENV} ; \ for _file in ${PATCHFILES}; do \ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ if [ ! -f $$file -a ! -f $${file##*/} ]; then \ if [ ! -z "$$select" ] ; then \ __PATCH_SITES_TMP= ; \ for group in $$select; do \ if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \ __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ fi; \ done; \ ___PATCH_SITES_TMP= ; \ SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ else \ SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ fi; \ for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ case $${file} in \ */*) args="-o $${file} $${site}$${file}";; \ *) args=$${site}$${file};; \ esac; \ ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \ done; \ ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \ fi; \ done) .endif .endif .if !target(fetch-url-list-int) fetch-url-list-int: @${MKDIR} ${_DISTDIR} @(cd ${_DISTDIR}; \ ${_MASTER_SITES_ENV}; \ for _file in ${DISTFILES}; do \ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ fileptn=`${ECHO_CMD} $$file | ${SED} 's|/|\\\\/|g;s/\./\\\\./g;s/\+/\\\\+/g;s/\?/\\\\?/g'` ; \ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f $${file##*/} ]; then \ if [ ! -z "$$select" ] ; then \ __MASTER_SITES_TMP= ; \ for group in $$select; do \ if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \ __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ fi \ done; \ ___MASTER_SITES_TMP= ; \ SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ else \ SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ fi ; \ for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ case $${file} in \ */*) args="-o $${file} $${site}$${file}";; \ *) args=$${site}$${file};; \ esac; \ ${ECHO_CMD} $${args} ; \ done; \ fi \ done) .if defined(PATCHFILES) @(cd ${_DISTDIR}; \ ${_PATCH_SITES_ENV} ; \ for _file in ${PATCHFILES}; do \ file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ fileptn=`${ECHO_CMD} $$file | ${SED} 's|/|\\\\/|g;s/\./\\\\./g;s/\+/\\\\+/g;s/\?/\\\\?/g'` ; \ select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f $${file##*/} ]; then \ if [ ! -z "$$select" ] ; then \ __PATCH_SITES_TMP= ; \ for group in $$select; do \ if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \ __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ fi \ done; \ ___PATCH_SITES_TMP= ; \ SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ else \ SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ fi ; \ for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ case $${file} in \ */*) args="-o $${file} $${site}$${file}";; \ *) args=$${site}$${file};; \ esac; \ ${ECHO_CMD} $${args} ; \ done; \ fi \ done) .endif .endif .if !target(fetch-urlall-list) fetch-urlall-list: @cd ${.CURDIR} && LISTALL=yes ${MAKE} fetch-url-list-int .endif .if !target(fetch-url-list) fetch-url-list: @cd ${.CURDIR} && ${MAKE} fetch-url-list-int .endif # Generates patches. update-patches: @toedit=`PATCH_WRKSRC=${PATCH_WRKSRC} \ PATCHDIR=${PATCHDIR} \ PATCH_LIST=${PATCHDIR}/patch-* \ DIFF_ARGS=${DIFF_ARGS} \ DISTORIG=${DISTORIG} \ ${SH} ${PORTSDIR}/Tools/scripts/update-patches`; \ case $$toedit in "");; \ *) ${ECHO_CMD} -n 'edit patches: '; read i; \ cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac # Checksumming utilities check-checksum-algorithms: @ \ ${checksum_init} \ \ for alg in ${CHECKSUM_ALGORITHMS:U}; do \ eval alg_executable=\$$$$alg; \ if [ -z "$$alg_executable" ]; then \ ${ECHO_MSG} "Checksum algorithm $$alg: Couldn't find the executable."; \ ${ECHO_MSG} "Set $$alg=/path/to/$$alg in /etc/make.conf and try again."; \ exit 1; \ fi; \ done; \ checksum_init=\ SHA256=${SHA256}; .if !target(makesum) makesum: check-checksum-algorithms @cd ${.CURDIR} && ${MAKE} fetch NO_CHECKSUM=yes \ DISABLE_SIZE=yes @if [ -f ${DISTINFO_FILE} ]; then ${CAT} /dev/null > ${DISTINFO_FILE}; fi @( \ cd ${DISTDIR}; \ \ ${checksum_init} \ \ for file in ${_CKSUMFILES}; do \ for alg in ${CHECKSUM_ALGORITHMS:U}; do \ eval alg_executable=\$$$$alg; \ \ if [ $$alg_executable != "NO" ]; then \ $$alg_executable $$file >> ${DISTINFO_FILE}; \ fi; \ done; \ ${ECHO_CMD} "SIZE ($$file) = `${STAT} -f \"%z\" $$file`" >> ${DISTINFO_FILE}; \ done \ ) @for file in ${_IGNOREFILES}; do \ for alg in ${CHECKSUM_ALGORITHMS:U}; do \ ${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${DISTINFO_FILE}; \ done; \ done .endif .if !target(checksum) checksum: fetch check-checksum-algorithms @${checksum_init} \ if [ -f ${DISTINFO_FILE} ]; then \ cd ${DISTDIR}; OK="";\ for file in ${_CKSUMFILES}; do \ ignored="true"; \ _file=$${file#${DIST_SUBDIR}/*}; \ for alg in ${CHECKSUM_ALGORITHMS:U}; do \ ignore="false"; \ eval alg_executable=\$$$$alg; \ \ if [ $$alg_executable != "NO" ]; then \ MKSUM=`$$alg_executable < $$file`; \ CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \ else \ ignore="true"; \ fi; \ \ if [ $$ignore = "false" -a -z "$$CKSUM" ]; then \ ${ECHO_MSG} "=> No $$alg checksum recorded for $$file."; \ ignore="true"; \ fi; \ \ if [ "$$CKSUM" = "IGNORE" ]; then \ ${ECHO_MSG} "=> $$alg Checksum for $$file is set to IGNORE in distinfo file even though"; \ ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ ignore="true"; \ OK=${FALSE}; \ fi; \ \ if [ $$ignore = "false" ]; then \ match="false"; \ for chksum in $$CKSUM; do \ if [ "$$chksum" = "$$MKSUM" ]; then \ match="true"; \ break; \ fi; \ done; \ if [ $$match = "true" ]; then \ ${ECHO_MSG} "=> $$alg Checksum OK for $$file."; \ ignored="false"; \ else \ ${ECHO_MSG} "=> $$alg Checksum mismatch for $$file."; \ refetchlist="$$refetchlist$$file "; \ OK="$${OK:-retry}"; \ ignored="false"; \ fi; \ fi; \ done; \ \ if [ $$ignored = "true" ]; then \ ${ECHO_MSG} "=> No suitable checksum found for $$file."; \ OK="${FALSE}"; \ fi; \ \ done; \ \ for file in ${_IGNOREFILES}; do \ _file=$${file#${DIST_SUBDIR}/*}; \ ignored="true"; \ alreadymatched="false"; \ for alg in ${CHECKSUM_ALGORITHMS:U}; do \ ignore="false"; \ eval alg_executable=\$$$$alg; \ \ if [ $$alg_executable != "NO" ]; then \ CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \ else \ ignore="true"; \ fi; \ \ if [ $$ignore = "false" ]; then \ if [ -z "$$CKSUM" ]; then \ ${ECHO_MSG} "=> No $$alg checksum for $$file recorded (expected IGNORE)"; \ OK="$$alreadymatched"; \ elif [ $$CKSUM != "IGNORE" ]; then \ ${ECHO_MSG} "=> $$alg Checksum for $$file is not set to IGNORE in distinfo file even though"; \ ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ else \ ignored="false"; \ alreadymatched="true"; \ fi; \ fi; \ done; \ \ if ( [ $$ignored = "true" ]) ; then \ ${ECHO_MSG} "=> No suitable checksum found for $$file."; \ OK="false"; \ fi; \ \ done; \ \ if [ "$${OK:=true}" = "retry" ] && [ ${FETCH_REGET} -gt 0 ]; then \ ${ECHO_MSG} "===> Refetch for ${FETCH_REGET} more times files: $$refetchlist"; \ if ( cd ${.CURDIR} && \ ${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" fetch); then \ if ( cd ${.CURDIR} && \ ${MAKE} ${.MAKEFLAGS} FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" checksum ); then \ OK="true"; \ fi; \ fi; \ fi; \ \ if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \ ${ECHO_MSG} "===> Giving up on fetching files: $$refetchlist"; \ ${ECHO_MSG} "Make sure the Makefile and distinfo file (${DISTINFO_FILE})"; \ ${ECHO_MSG} "are up to date. If you are absolutely sure you want to override this"; \ ${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \ exit 1; \ fi; \ if [ "$$OK" != "true" ]; then \ exit 1; \ fi; \ elif [ -n "${_CKSUMFILES:M*}" ]; then \ ${ECHO_MSG} "=> No checksum file (${DISTINFO_FILE})."; \ fi .endif ################################################################ # The special package-building targets # You probably won't need to touch these ################################################################ # Nobody should want to override this unless PKGNAME is simply bogus. .if !target(package-name) package-name: @${ECHO_CMD} ${PKGNAME} .endif # Build a package but don't check the package cookie .if !target(repackage) repackage: pre-repackage package pre-repackage: @${RM} -f ${PACKAGE_COOKIE} .endif # Build a package but don't check the cookie for installation, also don't # install package cookie .if !target(package-noinstall) package-noinstall: @${MKDIR} ${WRKDIR} @cd ${.CURDIR} && ${MAKE} pre-package \ pre-package-script do-package post-package-script @${RM} -f ${TMPPLIST} -@${RMDIR} ${WRKDIR} .endif ################################################################ # Dependency checking ################################################################ .if !target(depends) depends: pkg-depends extract-depends patch-depends lib-depends fetch-depends build-depends run-depends .if defined(ALWAYS_BUILD_DEPENDS) _DEPEND_ALWAYS= 1 .else _DEPEND_ALWAYS= 0 .endif _INSTALL_DEPENDS= \ if [ X${USE_PACKAGE_DEPENDS} != "X" ]; then \ subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \ subpkgname=$${subpkgfile%-*} ; \ subpkgname=$${subpkgname\#\#*/} ; \ if [ -r "$${subpkgfile}" -a "$$target" = "${DEPENDS_TARGET}" ]; then \ ${ECHO_MSG} "===> Installing existing package $${subpkgfile}"; \ if [ -n "${WITH_PKGNG}" -a $${subpkgname} = "pkg" ]; then \ [ -d ${WRKDIR} ] || ${MKDIR} ${WRKDIR} ; \ ${TAR} xf $${subpkgfile} -C ${WRKDIR} -s ",/.*/,,g" "*/pkg-static" ; \ ${WRKDIR}/pkg-static add $${subpkgfile}; \ ${RM} -f ${WRKDIR}/pkg-static; \ else \ ${PKG_ADD} $${subpkgfile}; \ fi; \ else \ (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \ fi; \ else \ (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \ fi; \ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; .for deptype in PKG EXTRACT PATCH FETCH BUILD RUN ${deptype:L}-depends: .if defined(${deptype}_DEPENDS) .if !defined(NO_DEPENDS) @for i in `${ECHO_CMD} "${${deptype}_DEPENDS}"`; do \ prog=$${i%%:*}; \ if [ -z "$$prog" ]; then \ ${ECHO_MSG} "Error: there is an empty port dependency in ${deptype}_DEPENDS."; \ break; \ fi; \ dir=`${ECHO_CMD} $$i | ${SED} -e 's/[^:]*://'`; \ if ${EXPR} "$$dir" : '.*:' > /dev/null; then \ target=$${dir##*:}; \ dir=$${dir%%:*}; \ if [ X${DEPENDS_PRECLEAN} != "X" ]; then \ target="clean $$target"; \ depends_args="$$depends_args NOCLEANDEPENDS=yes"; \ fi; \ if [ X${DEPENDS_CLEAN} != "X" ]; then \ target="$$target clean"; \ depends_args="$$depends_args NOCLEANDEPENDS=yes"; \ fi; \ else \ target="${DEPENDS_TARGET}"; \ depends_args="${DEPENDS_ARGS}"; \ fi; \ if ${EXPR} "$$prog" : \\/ >/dev/null; then \ if [ -e "$$prog" ]; then \ if [ "$$prog" = "${NONEXISTENT}" ]; then \ ${ECHO_MSG} "Error: ${NONEXISTENT} exists. Please remove it, and restart the build."; \ ${FALSE}; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \ if [ ${_DEPEND_ALWAYS} = 1 ]; then \ ${ECHO_MSG} " (but building it anyway)"; \ notfound=1; \ else \ notfound=0; \ fi; \ fi; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \ notfound=1; \ fi; \ else \ case $${prog} in \ *\>*|*\<*|*=*) pkg=yes;; \ *) pkg="";; \ esac; \ if [ "$$pkg" != "" ]; then \ if ${PKG_INFO} "$$prog" > /dev/null 2>&1 ; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - found"; \ if [ ${_DEPEND_ALWAYS} = 1 ]; then \ ${ECHO_MSG} " (but building it anyway)"; \ notfound=1; \ else \ notfound=0; \ fi; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - not found"; \ notfound=1; \ fi; \ if [ $$notfound != 0 ]; then \ inverse_dep=`${ECHO_CMD} $$prog | ${SED} \ -e 's/<=/=gt=/; s/=/=lt=/; s/>/=le=/' \ -e 's/=gt=/>/; s/=ge=/>=/; s/=lt=/ Found $$pkg_info, but you need to upgrade to $$prog."; \ exit 1; \ fi; \ fi; \ elif ${WHICH} "$$prog" > /dev/null 2>&1 ; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \ if [ ${_DEPEND_ALWAYS} = 1 ]; then \ ${ECHO_MSG} " (but building it anyway)"; \ notfound=1; \ else \ notfound=0; \ fi; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \ notfound=1; \ fi; \ fi; \ if [ $$notfound != 0 ]; then \ ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \ if [ ! -d "$$dir" ]; then \ ${ECHO_MSG} " => No directory for $$prog. Skipping.."; \ else \ ${_INSTALL_DEPENDS} \ fi; \ fi; \ done .endif .else @${DO_NADA} .endif .endfor lib-depends: .if defined(LIB_DEPENDS) && !defined(NO_DEPENDS) @for i in ${LIB_DEPENDS}; do \ lib=$${i%%:*}; \ pattern="`${ECHO_CMD} $$lib | ${SED} -E -e 's/\./\\\\./g' -e 's/(\\\\)?\+/\\\\+/g'`"\ dir=$${i#*:}; \ target=$${i##*:}; \ if ${TEST} $$dir = $$target; then \ target="${DEPENDS_TARGET}"; \ depends_args="${DEPENDS_ARGS}"; \ else \ dir=$${dir%%:*}; \ fi; \ ${ECHO_MSG} -n "===> ${PKGNAME} depends on shared library: $$lib"; \ if ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \ ${ECHO_MSG} " - found"; \ if [ ${_DEPEND_ALWAYS} = 1 ]; then \ ${ECHO_MSG} " (but building it anyway)"; \ notfound=1; \ else \ notfound=0; \ fi; \ else \ ${ECHO_MSG} " - not found"; \ notfound=1; \ fi; \ if [ $$notfound != 0 ]; then \ ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \ if [ ! -d "$$dir" ]; then \ ${ECHO_MSG} " => No directory for $$lib. Skipping.."; \ else \ ${_INSTALL_DEPENDS} \ if ! ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \ ${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \ ${FALSE}; \ fi; \ fi; \ fi; \ done .endif .endif # Dependency lists: both build and runtime, recursive. Print out directory names. _UNIFIED_DEPENDS=${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} _DEPEND_DIRS= ${_UNIFIED_DEPENDS:C,^[^:]*:([^:]*).*$,\1,} _DEPEND_SPECIALS= ${_UNIFIED_DEPENDS:M*\:*\:*:C,^[^:]*:([^:]*):.*$,\1,} all-depends-list: @${ALL-DEPENDS-LIST} ALL-DEPENDS-LIST= \ L="${_DEPEND_DIRS}"; \ checked=""; \ while [ -n "$$L" ]; do \ l=""; \ for d in $$L; do \ case $$checked in \ $$d\ *|*\ $$d\ *|*\ $$d) \ continue;; \ esac; \ checked="$$checked $$d"; \ if [ ! -d $$d ]; then \ ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ continue; \ fi; \ ${ECHO_CMD} $$d; \ if ! children=$$(cd $$d && ${MAKE} -V _DEPEND_DIRS); then\ ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ continue; \ fi; \ for child in $$children; do \ case "$$checked $$l" in \ $$child\ *|*\ $$child\ *|*\ $$child) \ continue;; \ esac; \ l="$$l $$child"; \ done; \ done; \ L=$$l; \ done CLEAN-DEPENDS-FULL= \ L="${_DEPEND_DIRS}"; \ checked=""; \ while [ -n "$$L" ]; do \ l=""; \ for d in $$L; do \ case $$checked in \ $$d\ *|*\ $$d\ *|*\ $$d) \ continue;; \ esac; \ checked="$$checked $$d"; \ if [ ! -d $$d ]; then \ ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ continue; \ fi; \ if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \ ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ continue; \ fi; \ state=0; \ for child in $$children; do \ case $$state in \ 0) \ if [ -d $$child ]; then \ ${ECHO_CMD} $$d; \ fi; \ state=1;; \ 1) \ case "$$checked $$l" in \ $$child\ *|*\ $$child\ *|*\ $$child) \ continue;; \ esac; \ l="$$l $$child";; \ esac; \ done; \ done; \ L=$$l; \ done CLEAN-DEPENDS-LIMITED= \ L="${_DEPEND_DIRS}"; \ checked=""; \ while [ -n "$$L" ]; do \ l=""; \ for d in $$L; do \ case $$checked in \ $$d\ *|*\ $$d\ *|*\ $$d) \ continue;; \ esac; \ checked="$$checked $$d"; \ if [ ! -d $$d ]; then \ ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ continue; \ fi; \ if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \ ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ continue; \ fi; \ state=0; \ for child in $$children; do \ case $$state in \ 0) \ if [ ! -d $$child ]; then \ break; \ fi; \ state=1; \ ${ECHO_CMD} $$d;; \ 1) \ case "$$checked $$l" in \ $$child\ *|*\ $$child\ *|*\ $$child) \ continue;; \ esac; \ l="$$l $$child";; \ esac; \ done; \ done; \ L=$$l; \ done .if !target(clean-depends) clean-depends: @for dir in $$(${CLEAN-DEPENDS-FULL}); do \ (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \ done .endif .if !target(limited-clean-depends) limited-clean-depends: @for dir in $$(${CLEAN-DEPENDS-LIMITED}); do \ (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \ done .endif .if !target(deinstall-depends) deinstall-depends: @for dir in $$(${ALL-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} deinstall); \ done .endif .if !target(fetch-specials) fetch-specials: @${ECHO_MSG} "===> Fetching all distfiles required by ${PKGNAME} for building" @for dir in ${_DEPEND_SPECIALS}; do \ (cd $$dir; ${MAKE} fetch); \ done .endif .if !target(fetch-recursive) fetch-recursive: @${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies" @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} fetch); \ done .endif .if !target(fetch-recursive-list) fetch-recursive-list: @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} fetch-list); \ done .endif # Used by fetch-required and fetch-required list, this script looks # at each of the dependencies. If 3 items are specified in the tuple, # such as foo:${PORTSDIR}/graphics/foo:extract, the first item (foo) # is examined. Only if it begins with a / and does not exist on the # file-system will ``make targ'' proceed. # For more usual (dual-item) dependency tuples, the ``make targ'' # proceeds, if the exact package, which the directory WOULD'VE installed, # is not yet installed. # This is the exact behaviour of the old code, and it may need # revisiting. For example, the entire first case seems dubious, and in # the second case we, probably, should be satisfied with _any_ (earlier) # package, with the same origin as that of the dir. # # -mi FETCH_LIST?= for i in $$deps; do \ prog=$${i%%:*}; dir=$${i\#*:}; \ case $$dir in \ *:*) if [ $$prog != $${prog\#/} -o ! -e $$prog ]; then \ dir=$${dir%%:*}; \ else \ continue; \ fi;; \ *) if [ -d ${PKG_DBDIR}/$$(cd $$dir; ${MAKE} -V PKGNAME) ]; then \ continue; \ fi;; \ esac; \ echo cd $$dir; cd $$dir; ${MAKE} $$targ; \ done .if !target(fetch-required) fetch-required: fetch .if defined(NO_DEPENDS) @${ECHO_MSG} "===> NO_DEPENDS is set, not fetching any other distfiles for ${PKGNAME}" .else @${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies" .for deptype in PKG EXTRACT PATCH FETCH BUILD RUN .if defined(${deptype}_DEPENDS) @targ=fetch; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST} .endif .endfor .endif .endif .if !target(fetch-required-list) fetch-required-list: fetch-list .if !defined(NO_DEPENDS) .for deptype in PKG EXTRACT PATCH FETCH BUILD RUN .if defined(${deptype}_DEPENDS) @targ=fetch-list; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST} .endif .endfor .endif .endif .if !target(checksum-recursive) checksum-recursive: @${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies" @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} checksum); \ done .endif # Dependency lists: build and runtime. Print out directory names. build-depends-list: .if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) @${BUILD-DEPENDS-LIST} .endif BUILD-DEPENDS-LIST= \ for dir in $$(${ECHO_CMD} "${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${SED} -E -e 's,([^: ]*):([^: ]*)(:[^ ]*)?,\2,g' -e 'y/ /\n/'| ${SORT} -u); do \ if [ -d $$dir ]; then \ ${ECHO_CMD} $$dir; \ else \ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ fi; \ done | ${SORT} -u run-depends-list: .if defined(LIB_DEPENDS) || defined(RUN_DEPENDS) @${RUN-DEPENDS-LIST} .endif RUN-DEPENDS-LIST= \ for dir in $$(${ECHO_CMD} "${_LIB_RUN_DEPENDS:C,.*:([^:]*).*,\1,}" | ${SED} -e 'y/ /\n/' | ${SORT} -u); do \ if [ -d $$dir ]; then \ ${ECHO_CMD} $$dir; \ else \ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ fi; \ done | ${SORT} -u # Package (recursive runtime) dependency list. Print out both directory names # and package names. package-depends-list: .if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS) @${PACKAGE-DEPENDS-LIST} .endif _LIB_RUN_DEPENDS= ${LIB_DEPENDS} ${RUN_DEPENDS} PACKAGE-DEPENDS-LIST?= \ if [ "${CHILD_DEPENDS}" ]; then \ installed=$$(${PKG_INFO} -qO ${PKGORIGIN} 2>/dev/null || \ ${TRUE}); \ if [ "$$installed" ]; then \ break; \ fi; \ if [ -z "$$installed" ]; then \ installed="${PKGNAME}"; \ fi; \ for pkgname in $$installed; do \ ${ECHO_CMD} "$$pkgname ${.CURDIR} ${PKGORIGIN}"; \ done; \ fi; \ checked="${PARENT_CHECKED}"; \ for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \ dir=$$(${REALPATH} $$dir); \ if [ -d $$dir ]; then \ case $$checked in \ $$dir|$$dir\ *|*\ $$dir|*\ $$dir\ *) continue;; \ esac; \ childout=$$(cd $$dir; ${MAKE} CHILD_DEPENDS=yes PARENT_CHECKED="$$checked" package-depends-list); \ set -- $$childout; \ childdir=""; \ while [ $$\# != 0 ]; do \ childdir="$$childdir $$2"; \ ${ECHO_CMD} "$$1 $$2 $$3"; \ shift 3; \ done; \ checked="$$dir $$childdir $$checked"; \ else \ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ fi; \ done ACTUAL-PACKAGE-DEPENDS?= \ if [ "${_LIB_RUN_DEPENDS}" != " " ]; then \ origins=$$(for pkgname in ${PKG_DBDIR}/*; do \ if [ -e $$pkgname/+CONTENTS ]; then \ ${ECHO_CMD} $${pkgname\#\#*/}; \ ${SED} -n -e "s/@comment ORIGIN://p" $$pkgname/+CONTENTS; \ fi; \ done); \ for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \ tmp=$${dir\#${PORTSDIR}/}; \ if [ "$$tmp" = "$$dir" ]; then \ tmp=$${dir%/*}; \ dir=$${tmp\#\#*/}/$${dir\#\#*/}; \ else \ dir=$$tmp; \ fi; \ set -- $$origins; \ while [ $$\# -gt 1 ]; do \ if [ ! -d "${PORTSDIR}/$$2" ]; then \ shift; \ continue; \ fi; \ if [ "$$dir" = "$$2" ]; then \ ${ECHO_CMD} $$1:$$dir; \ if [ -e ${PKG_DBDIR}/$$1/+CONTENTS -a -z "${EXPLICIT_PACKAGE_DEPENDS}" ]; then \ packagelist="$$packagelist ${PKG_DBDIR}/$$1/+CONTENTS"; \ fi; \ break; \ fi; \ shift 2; \ done; \ done; \ [ -z "$$packagelist" ] || ${AWK} -F '( |:)' 'BEGIN { pkgname="broken_contents" } /@pkgdep / { pkgname=$$2 } /@comment DEPORIGIN:/ { printf "%s:%s\n", pkgname, $$3; pkgname="broken_contents" }' $$packagelist; \ fi # Print out package names. package-depends: @${PACKAGE-DEPENDS-LIST} | ${AWK} '{print $$1":"$$3}' actual-package-depends: @${ACTUAL-PACKAGE-DEPENDS} # Build packages for port and dependencies package-recursive: package @for dir in $$(${ALL-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} package-noinstall); \ done # Show missing dependencies missing: @_origins=$$(${PKG_INFO} -aoq); \ for dir in $$(${ALL-DEPENDS-LIST}); do \ _origin=$${dir##${PORTSDIR}/}; \ if ! $$(${ECHO_CMD} $${_origins} | ${GREP} -q $${_origin}); then \ ${ECHO_CMD} $${_origin}; \ fi; \ done ################################################################ # Everything after here are internal targets and really # shouldn't be touched by anybody but the release engineers. ################################################################ # This target generates an index entry suitable for aggregation into # a large index. Format is: # # distribution-name|port-path|installation-prefix|comment| \ # description-file|maintainer|categories|extract-depends| \ # patch-depends|fetch-depends|build-depends|run-depends|www site # # If this ever changes, portmgr should contact the portsnap maintainer # first to avoid gratuitous breakage. . if !target(describe) _EXTRACT_DEPENDS=${EXTRACT_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} _PATCH_DEPENDS=${PATCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} _FETCH_DEPENDS=${FETCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} _LIB_DEPENDS=${LIB_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} _BUILD_DEPENDS=${BUILD_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS} _RUN_DEPENDS=${RUN_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS} . if exists(${DESCR}) _DESCR=${DESCR} . else _DESCR=/dev/null . endif . if defined(BUILDING_INDEX) && defined(INDEX_PORTS) INDEX_OUT=${INDEX_TMPDIR}/${INDEXFILE}.desc.aggr . else INDEX_OUT=/dev/stdout . endif describe: @(${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"; \ ${ECHO_CMD} -n ${COMMENT:Q}; \ ${ECHO_CMD} -n "|${_DESCR}|${MAINTAINER}|${CATEGORIES}|${_EXTRACT_DEPENDS}|${_PATCH_DEPENDS}|${_FETCH_DEPENDS}|${_BUILD_DEPENDS:O:u}|${_RUN_DEPENDS:O:u}|"; \ while read one two discard; do \ case "$$one" in \ WWW:) case "$$two" in \ https://*|http://*|ftp://*) ${ECHO_CMD} -n "$$two" ;; \ *) ${ECHO_CMD} -n "http://$$two" ;; \ esac; \ break; \ ;; \ esac; \ done < ${DESCR}; ${ECHO_CMD}) >>${INDEX_OUT} . endif www-site: .if exists(${DESCR}) @${AWK} '$$1 ~ /^WWW:/ {print $$2}' ${DESCR} | ${HEAD} -1 .else @${ECHO_CMD} .endif .if !target(readmes) readmes: readme .endif .if !target(readme) readme: @${RM} -f ${.CURDIR}/README.html @cd ${.CURDIR} && ${MAKE} ${.CURDIR}/README.html .endif ${.CURDIR}/README.html: @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}" @${SED} -e 's|%%PORT%%|'$$(${ECHO_CMD} ${.CURDIR} | \ ${SED} -e 's|.*/\([^/]*/[^/]*\)$$|\1|')'|g' \ -e 's|%%PKG%%|${PKGNAME}|g' \ -e 's|%%COMMENT%%|'"$$(${ECHO_CMD} ${COMMENT:Q})"'|' \ -e '/%%COMMENT%%/d' \ -e 's|%%DESCR%%|'"$$(${ECHO_CMD} ${DESCR} | \ ${SED} -e 's|${.CURDIR}/||')"'|' \ -e 's|%%EMAIL%%|'"$$(${ECHO_CMD} "${MAINTAINER}" | \ ${SED} -e 's/([^)]*)//;s/.*.*//')"'|g' \ -e 's|%%MAINTAINER%%|${MAINTAINER}|g' \ -e 's|%%WEBSITE%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-www-site)"'|' \ -e 's|%%BUILD_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-build-depends-list)"'|' \ -e 's|%%RUN_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-run-depends-list)"'|' \ -e 's|%%TOP%%|'"$$(${ECHO_CMD} ${CATEGORIES} | \ ${SED} -e 's| .*||' -e 's|[^/]*|..|g')"'/..|' \ ${TEMPLATES}/README.port >> ${.TARGET} # The following two targets require an up-to-date INDEX in ${PORTSDIR} _PRETTY_PRINT_DEPENDS_LIST=\ if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \ ${ECHO_MSG} "${.TARGET} requires an INDEX file (${INDEXFILE}). Please run make index or make fetchindex."; \ else \ target=${.TARGET:C/pretty-print-(.*)-depends-list/\1/} ; \ if [ "$$target" = "build" ] ; then fldnum=8 ; else fldnum=9 ; fi; \ ${ECHO_MSG} -n 'This port requires package(s) "' ; \ ${ECHO_MSG} -n `${AWK} -F\| "\\$$1 ~ /^${PKGNAME}/ {print \\$$$${fldnum};}" ${INDEXDIR}/${INDEXFILE}` ; \ ${ECHO_MSG} "\" to $$target."; \ fi; .if !target(pretty-print-build-depends-list) pretty-print-build-depends-list: .if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \ defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) @${_PRETTY_PRINT_DEPENDS_LIST} .endif .endif .if !target(pretty-print-run-depends-list) pretty-print-run-depends-list: .if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) @${_PRETTY_PRINT_DEPENDS_LIST} .endif .endif _SUB_LIST_TEMP= ${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} .if !target(apply-slist) apply-slist: .if defined(SUB_FILES) .for file in ${SUB_FILES} .if !exists(${FILESDIR}/${file}.in) @${ECHO_MSG} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1 .else @${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file} .endif .endfor .for i in pkg-message pkg-install pkg-deinstall pkg-req .if ${SUB_FILES:M${i}*}!="" ${i:S/-//:U}= ${WRKDIR}/${SUB_FILES:M${i}*} .endif .endfor .endif .endif # Generate packing list. Also tests to make sure all required package # files exist. .if !target(generate-plist) generate-plist: @${ECHO_MSG} "===> Generating temporary packing list" @${MKDIR} `${DIRNAME} ${TMPPLIST}` @if [ ! -f ${DESCR} ]; then ${ECHO_MSG} "** Missing pkg-descr for ${PKGNAME}."; exit 1; fi @>${TMPPLIST} @for file in ${PLIST_FILES}; do \ ${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} >> ${TMPPLIST}; \ done @for man in ${__MANPAGES}; do \ ${ECHO_CMD} $${man} >> ${TMPPLIST}; \ done .for _PREFIX in ${PREFIX} .if ${_TMLINKS:M${_PREFIX}*}x != x @for i in ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||}; do \ ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \ done .endif .if ${_TMLINKS:N${_PREFIX}*}x != x @${ECHO_CMD} @cwd / >> ${TMPPLIST} @for i in ${_TMLINKS:N${_PREFIX}*:S|^/||}; do \ ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \ done @${ECHO_CMD} '@cwd ${PREFIX}' >> ${TMPPLIST} .endif .endfor @if [ -f ${PLIST} ]; then \ ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}; \ fi .for dir in ${PLIST_DIRS} @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrm ,' >> ${TMPPLIST} .endfor .for dir in ${PLIST_DIRSTRY} @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrmtry ,' >> ${TMPPLIST} .endfor .for reinplace in ${PLIST_REINPLACE} .if defined(PLIST_REINPLACE_${reinplace:U}) @${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST} .endif .endfor .if defined(USE_LINUX_PREFIX) .if defined(USE_LDCONFIG) @${ECHO_CMD} "@exec ${LDCONFIG_CMD}" >> ${TMPPLIST} @${ECHO_CMD} "@unexec ${LDCONFIG_CMD}" >> ${TMPPLIST} .endif .else .if defined(USE_LDCONFIG) .if !defined(INSTALL_AS_USER) @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG}" >> ${TMPPLIST} @${ECHO_CMD} "@unexec ${LDCONFIG} -R" >> ${TMPPLIST} .else @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG} || ${TRUE}" >> ${TMPPLIST} @${ECHO_CMD} "@unexec ${LDCONFIG} -R || ${TRUE}" >> ${TMPPLIST} .endif .endif .if defined(USE_LDCONFIG32) .if !defined(INSTALL_AS_USER) @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32}" >> ${TMPPLIST} @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R" >> ${TMPPLIST} .else @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32} || ${TRUE}" >> ${TMPPLIST} @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R || ${TRUE}" >> ${TMPPLIST} .endif .endif .endif .if !defined(WITH_PKGNG) @cd ${.CURDIR} && { ${MAKE} pretty-print-config | fold -sw 120 | ${SED} -e 's/^/@comment OPTIONS:/'; } >> ${TMPPLIST} .endif .endif ${TMPPLIST}: @cd ${.CURDIR} && ${MAKE} generate-plist ${TMPPLIST_SORT}: ${TMPPLIST} @${SORT} -u ${TMPPLIST} >${TMPPLIST_SORT} .if !target(add-plist-docs) add-plist-docs: .if defined(PORTDOCS) && !defined(NOPORTDOCS) @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ fi .for x in ${PORTDOCS} @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ if [ ! -e ${DOCSDIR}/${x} ]; then \ ${ECHO_CMD} ${DOCSDIR_REL}/${x} >> ${TMPPLIST}; \ fi;fi .endfor @${FIND} -P ${PORTDOCS:S/^/${DOCSDIR}\//} ! -type d 2>/dev/null | \ ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST} @${FIND} -P -d ${PORTDOCS:S/^/${DOCSDIR}\//} -type d 2>/dev/null | \ ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} @${ECHO_CMD} "@dirrm ${DOCSDIR_REL}" >> ${TMPPLIST} .else @${DO_NADA} .endif .endif .if !target(add-plist-examples) add-plist-examples: .if defined(PORTEXAMPLES) && !defined(NOPORTEXAMPLES) @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ fi .for x in ${PORTEXAMPLES} @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ if [ ! -e ${EXAMPLESDIR}/${x} ]; then \ ${ECHO_CMD} ${EXAMPLESDIR}/${x} | \ ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \ fi;fi .endfor @${FIND} -P ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} ! -type d 2>/dev/null | \ ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST} @${FIND} -P -d ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} -type d 2>/dev/null | \ ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} @${ECHO_CMD} "@dirrm ${EXAMPLESDIR:S,^${PREFIX}/,,}" >> ${TMPPLIST} .else @${DO_NADA} .endif .endif .if !target(add-plist-data) add-plist-data: .if defined(PORTDATA) && !defined(NOPORTDATA) @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ fi .for x in ${PORTDATA} @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ if [ ! -e ${DATADIR}/${x} ]; then \ ${ECHO_CMD} ${DATADIR}/${x} | \ ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \ fi;fi .endfor @${FIND} -P ${PORTDATA:S/^/${DATADIR}\//} ! -type d 2>/dev/null | \ ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST} @${FIND} -P -d ${PORTDATA:S/^/${DATADIR}\//} -type d 2>/dev/null | \ ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} @${ECHO_CMD} "@dirrm ${DATADIR:S,^${PREFIX}/,,}" >> ${TMPPLIST} .else @${DO_NADA} .endif .endif .if !target(add-plist-buildinfo) add-plist-buildinfo: .if defined(PACKAGE_BUILDING) @${ECHO_CMD} "@comment Build details: ${BUILDHOST}|${JAIL}|${BUILD}|${PORTSTREE}|${BUILDDATE}" >> ${TMPPLIST} .endif .endif .if !target(add-plist-info) add-plist-info: # Process GNU INFO files at package install/deinstall time .if defined(INFO) .for i in ${INFO} install-info --quiet ${PREFIX}/${INFO_PATH}/$i.info ${PREFIX}/${INFO_PATH}/dir .if !defined(WITH_PKGNG) @${ECHO_CMD} "@unexec install-info --quiet --delete %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \ >> ${TMPPLIST} @${LS} ${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${PREFIX}/::g >> ${TMPPLIST} @${ECHO_CMD} "@exec install-info --quiet %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \ >> ${TMPPLIST} .else @${LS} ${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${PREFIX}/:@info\ :g >> ${TMPPLIST} .endif .endfor .if defined(INFO_SUBDIR) @${ECHO_CMD} "@unexec ${RMDIR} %D/${INFO_PATH}/${INFO_SUBDIR} 2> /dev/null || true" >> ${TMPPLIST} .endif .if (${PREFIX} != "/usr") @${ECHO_CMD} "@unexec if [ -f %D/${INFO_PATH}/dir ]; then if sed -e '1,/Menu:/d' %D/${INFO_PATH}/dir | grep -q '^[*] '; then true; else rm %D/${INFO_PATH}/dir; fi; fi" >> ${TMPPLIST} .if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE}) @${ECHO_CMD} "@unexec rmdir %D/${INFO_PATH} 2>/dev/null || true" >> ${TMPPLIST} .endif .endif .endif .endif # If we're installing into a non-standard PREFIX, we need to remove that directory at # deinstall-time .if !target(add-plist-post) add-plist-post: .if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE} && ${PREFIX} != "/usr") @${ECHO_CMD} "@unexec rmdir %D 2> /dev/null || true" >> ${TMPPLIST} .else @${DO_NADA} .endif .endif .if !target(install-rc-script) install-rc-script: .if defined(USE_RCORDER) || defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" .if defined(USE_RCORDER) @${ECHO_MSG} "===> Installing early rc.d startup script(s)" @${ECHO_CMD} "@cwd /" >> ${TMPPLIST} @for i in ${USE_RCORDER}; do \ ${INSTALL_SCRIPT} ${WRKDIR}/$${i} /etc/rc.d/$${i%.sh}; \ ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \ done @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST} .endif .if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" @${ECHO_MSG} "===> Installing rc.d startup script(s)" @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST} @for i in ${USE_RC_SUBR}; do \ ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${PREFIX}/etc/rc.d/$${i%.sh}; \ ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \ done .endif .else @${DO_NADA} .endif .endif # Compress (or uncompress) and symlink manpages. .if !target(compress-man) compress-man: .if defined(_MANPAGES) || defined(_MLINKS) .if ${MANCOMPRESSED} == yes && defined(NO_MANCOMPRESS) @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}" @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GUNZIP_CMD} $${_manpages} ) || ${TRUE} .elif ${MANCOMPRESSED} == no && !defined(NO_MANCOMPRESS) @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}" @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GZIP_CMD} $${_manpages} ) || ${TRUE} .endif .if defined(_MLINKS) @set -- ${_MLINKS}; \ while :; do \ [ $$# -eq 0 ] && break || ${TRUE}; \ ${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \ ${LN} -fs `${ECHO_CMD} $$1 $$2 | ${AWK} '{ \ z=split($$1, a, /\//); x=split($$2, b, /\//); \ while (a[i] == b[i]) i++; \ for (q=i; q Registering installation for ${PKGNAME}"; \ ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \ ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \ ${ECHO_CMD} ${COMMENT:Q} > ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ if [ -f ${PKGINSTALL} ]; then \ ${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ fi; \ if [ -f ${PKGDEINSTALL} ]; then \ ${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \ fi; \ if [ -f ${PKGREQ} ]; then \ ${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \ fi; \ if [ -f ${PKGMESSAGE} ]; then \ ${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \ ${ECHO_CMD} "@display +DISPLAY" >> ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ fi; \ for dep in `${PKG_INFO} -qf ${PKGNAME} | ${AWK} '/^@pkgdep / {print $$2}' | ${SORT} -u`; do \ if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \ if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \ >/dev/null 2>&1; then \ ${ECHO_CMD} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \ fi; \ fi; \ done; \ fi .if !defined(NO_MTREE) @if [ -f ${MTREE_FILE} ]; then \ ${CP} ${MTREE_FILE} ${PKG_DBDIR}/${PKGNAME}/+MTREE_DIRS; \ fi .endif @if [ -e /tmp/${PKGNAME}-required-by ]; then \ ${CAT} /tmp/${PKGNAME}-required-by >> ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY; \ ${RM} -f /tmp/${PKGNAME}-required-by; \ fi .else @${DO_NADA} .endif .endif # Depend is generally meaningless for arbitrary ports, but if someone wants # one they can override this. This is just to catch people who've gotten into # the habit of typing `make depend all install' as a matter of course. # .if !target(depend) depend: .endif # Same goes for tags .if !target(tags) tags: .endif .if !defined(NOPRECIOUSMAKEVARS) # These won't change, so we can pass them through the environment .MAKEFLAGS: \ ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ SYSTEMVERSION="${SYSTEMVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" .endif .if !target(pre-check-config) pre-check-config: .for single in ${OPTIONS_SINGLE} . for opt in ${OPTIONS_SINGLE_${single}} . if empty(ALL_OPTIONS:M${single}) || !empty(PORT_OPTIONS:M${single}) . if !empty(PORT_OPTIONS:M${opt}) . if defined(OPTFOUND) OPTIONS_WRONG_SINGLE+= ${single} . else OPTFOUND= true . endif . endif . else # if conditional and if the condition is unchecked, remove opt from the list of # set options PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}} OPTNOCHECK= true . endif . endfor . if !defined(OPTFOUND) && !defined(OPTNOCHECK) OPTIONS_WRONG_SINGLE+= ${single} . endif . undef OPTFOUND . undef OPTNOCHECK .endfor .undef single .for radio in ${OPTIONS_RADIO} . for opt in ${OPTIONS_RADIO_${radio}} . if !empty(PORT_OPTIONS:M${opt}) . if defined(OPTFOUND) OPTIONS_WRONG_RADIO+= ${radio} . else OPTFOUND= true . endif . endif . endfor . undef OPTFOUND .endfor .for multi in ${OPTIONS_MULTI} . for opt in ${OPTIONS_MULTI_${multi}} . if empty(ALL_OPTIONS:M${multi}) || !empty(PORT_OPTIONS:M${multi}) . if !empty(PORT_OPTIONS:M${opt}) OPTFOUND= true . endif . else # if conditional and if the condition is unchecked, remove opt from the list of # set options PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}} OPTNOCHECK= true . endif . endfor . if !defined(OPTFOUND) && !defined(OPTNOCHECK) OPTIONS_WRONG_MULTI+= ${multi} . endif . undef OPTFOUND . undef OPTNOCHECK .endfor .undef multi .undef opt .endif #pre-check-config .if !target(_check-config) _check-config: pre-check-config .for multi in ${OPTIONS_WRONG_MULTI} @${ECHO_MSG} "====> You must check at least one option in the ${multi} multi" .endfor .for single in ${OPTIONS_WRONG_SINGLE} @${ECHO_MSG} "====> You must select one and only one option from the ${single} single" .endfor .for radio in ${OPTIONS_WRONG_RADIO} @${ECHO_MSG} "====> You cannot select multiple options from the ${radio} radio" .endfor .if !empty(OPTIONS_WRONG_MULTI) || !empty(OPTIONS_WRONG_SINGLE) || !empty(OPTIONS_WRONG_RADIO) _CHECK_CONFIG_ERROR= true .endif .endif # _check-config .if !target(check-config) check-config: _check-config .if !empty(_CHECK_CONFIG_ERROR) @exit 1 .endif .endif # check-config .if !target(sanity-config) sanity-config: _check-config .if !empty(_CHECK_CONFIG_ERROR) @echo -n "Config is invalid. Re-edit? [Y/n] "; \ read answer; \ case $$answer in \ [Nn]|[Nn][Oo]) \ exit 0; \ esac; \ cd ${.CURDIR} && ${MAKE} config .endif .endif # sanity-config .if !target(pre-config) pre-config: D4P_ENV= PKGNAME="${PKGNAME}" \ PORT_OPTIONS="${PORT_OPTIONS}" \ ALL_OPTIONS="${ALL_OPTIONS}" \ OPTIONS_MULTI="${OPTIONS_MULTI}" \ OPTIONS_SINGLE="${OPTIONS_SINGLE}" \ OPTIONS_RADIO="${OPTIONS_RADIO}" \ OPTIONS_GROUP="${OPTIONS_GROUP}" \ DIALOG4PORTS="${DIALOG4PORTS}" \ PREFIX="${PREFIX}" \ LOCALBASE="${LOCALBASE}" \ PORTSDIR="${PORTSDIR}" \ MAKE="${MAKE}" \ D4PHEIGHT="${D4PHEIGHT}" \ D4PWIDTH="${D4PWIDTH}" \ D4PFULLSCREEN="${D4PFULLSCREEN}" .if exists(${PKGHELP}) D4P_ENV+= PKGHELP="${PKGHELP}" .endif .for opt in ${ALL_OPTIONS} D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" .endfor .for multi in ${OPTIONS_MULTI} D4P_ENV+= OPTIONS_MULTI_${multi}="${OPTIONS_MULTI_${multi}}" \ ${multi}_DESC=""${${multi}_DESC:Q}"" . for opt in ${OPTIONS_MULTI_${multi}} D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" . endfor .endfor .for single in ${OPTIONS_SINGLE} D4P_ENV+= OPTIONS_SINGLE_${single}="${OPTIONS_SINGLE_${single}}" \ ${single}_DESC=""${${single}_DESC:Q}"" . for opt in ${OPTIONS_SINGLE_${single}} D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" . endfor .endfor .for radio in ${OPTIONS_RADIO} D4P_ENV+= OPTIONS_RADIO_${radio}="${OPTIONS_RADIO_${radio}}" \ ${radio}_DESC=""${${radio}_DESC:Q}"" . for opt in ${OPTIONS_RADIO_${radio}} D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" . endfor .endfor .for group in ${OPTIONS_GROUP} D4P_ENV+= OPTIONS_GROUP_${group}="${OPTIONS_GROUP_${group}}" \ ${group}_DESC=""${${group}_DESC:Q}"" . for opt in ${OPTIONS_GROUP_${group}} D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" . endfor .endfor .undef multi .undef single .undef group .undef opt .endif # pre-config .if !target(do-config) do-config: .if empty(ALL_OPTIONS) && empty(OPTIONS_SINGLE) && empty(OPTIONS_MULTI) && empty(OPTIONS_RADIO) && empty(OPTIONS_GROUP) @${ECHO_MSG} "===> No options to configure" .else .if ${UID} != 0 && !defined(INSTALL_AS_USER) @optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \ ${ECHO_MSG} "===> Switching to root credentials to create $${optionsdir}"; \ (${SU_CMD} "${SH} -c \"${MKDIR} $${optionsdir} 2> /dev/null\"") || \ (${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1); \ ${ECHO_MSG} "===> Returning to user credentials" .else @(optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \ ${MKDIR} $${optionsdir} 2> /dev/null) || \ (${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1) .endif @TMPOPTIONSFILE=$$(mktemp -t portoptions); \ trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \ ${SETENV} ${D4P_ENV} ${SH} ${PORTSDIR}/Tools/scripts/dialog4ports.sh $${TMPOPTIONSFILE} || { \ ${RM} -f $${TMPOPTIONSFILE}; \ ${ECHO_MSG} "===> Options unchanged"; \ exit 0; \ }; \ ${ECHO_CMD}; \ if [ ! -e $${TMPOPTIONSFILE} ]; then \ ${ECHO_MSG} "===> No user-specified options to save for ${PKGNAME}"; \ exit 0; \ fi; \ SELOPTIONS=$$(${CAT} $${TMPOPTIONSFILE}); \ ${RM} -f $${TMPOPTIONSFILE}; \ TMPOPTIONSFILE=$$(mktemp -t portoptions); \ trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \ ${ECHO_CMD} "# This file is auto-generated by 'make config'." > $${TMPOPTIONSFILE}; \ ${ECHO_CMD} "# Options for ${PKGNAME}" >> $${TMPOPTIONSFILE}; \ ${ECHO_CMD} "_OPTIONS_READ=${PKGNAME}" >> $${TMPOPTIONSFILE}; \ ${ECHO_CMD} "_FILE_COMPLETE_OPTIONS_LIST=${COMPLETE_OPTIONS_LIST}" >> $${TMPOPTIONSFILE}; \ for i in ${COMPLETE_OPTIONS_LIST}; do \ if ${ECHO_CMD} $${SELOPTIONS} | ${GREP} -qw $${i}; then \ ${ECHO_CMD} "OPTIONS_FILE_SET+=$${i}" >> $${TMPOPTIONSFILE}; \ else \ ${ECHO_CMD} "OPTIONS_FILE_UNSET+=$${i}" >> $${TMPOPTIONSFILE}; \ fi; \ done; \ if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \ ${ECHO_MSG} "===> Switching to root credentials to write ${OPTIONSFILE}"; \ ${SU_CMD} "${CAT} $${TMPOPTIONSFILE} > ${OPTIONSFILE}"; \ ${ECHO_MSG} "===> Returning to user credentials"; \ else \ ${CAT} $${TMPOPTIONSFILE} > ${OPTIONSFILE}; \ fi; \ ${RM} -f $${TMPOPTIONSFILE} @cd ${.CURDIR} && ${MAKE} sanity-config .endif .endif # do-config .if !target(config) .if !defined(NO_DIALOG) config: pre-config do-config .else config: @${ECHO_MSG} "===> Skipping 'config' as NO_DIALOG is defined" .endif .endif # config .if !target(config-recursive) config-recursive: @${ECHO_MSG} "===> Setting user-specified options for ${PKGNAME} and dependencies"; @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} config-conditional); \ done .endif # config-recursive .if !target(config-conditional) config-conditional: pre-config .if defined(COMPLETE_OPTIONS_LIST) && !defined(NO_DIALOG) . if !defined(_FILE_COMPLETE_OPTIONS_LIST) || ${COMPLETE_OPTIONS_LIST:O} != ${_FILE_COMPLETE_OPTIONS_LIST:O} @cd ${.CURDIR} && ${MAKE} do-config; . endif .endif .endif # config-conditional .if !target(showconfig) .include "${PORTSDIR}/Mk/bsd.options.desc.mk" showconfig: .if !empty(ALL_OPTIONS) || !empty(OPTIONS_SINGLE) || !empty(OPTIONS_MULTI) || !empty(OPTIONS_RADIO) || !empty(OPTIONS_GROUP) @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME}": .for opt in ${ALL_OPTIONS} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n " ${opt}=off" . else @${ECHO_MSG} -n " ${opt}=on" . endif . if !empty(${opt}_DESC) @${ECHO_MSG} -n ": "${${opt}_DESC:Q} . endif @${ECHO_MSG} "" .endfor #multi and conditional multis .for multi in ${OPTIONS_MULTI} @${ECHO_MSG} "====> Options available for the multi ${multi}: you have to choose at least one of them" . for opt in ${OPTIONS_MULTI_${multi}} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n " ${opt}=off" . else @${ECHO_MSG} -n " ${opt}=on" . endif . if !empty(${opt}_DESC) @${ECHO_MSG} -n ": "${${opt}_DESC:Q} . endif @${ECHO_MSG} "" . endfor .endfor #single and conditional singles .for single in ${OPTIONS_SINGLE} @${ECHO_MSG} "====> Options available for the single ${single}: you have to select exactly one of them" . for opt in ${OPTIONS_SINGLE_${single}} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n " ${opt}=off" . else @${ECHO_MSG} -n " ${opt}=on" . endif . if !empty(${opt}_DESC) @${ECHO_MSG} -n ": "${${opt}_DESC:Q} . endif @${ECHO_MSG} "" . endfor .endfor .for radio in ${OPTIONS_RADIO} @${ECHO_MSG} "====> Options available for the radio ${radio}: you can only select none or one of them" . for opt in ${OPTIONS_RADIO_${radio}} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n " ${opt}=off" . else @${ECHO_MSG} -n " ${opt}=on" . endif . if !empty(${opt}_DESC) @${ECHO_MSG} -n ": "${${opt}_DESC:Q} . endif @${ECHO_MSG} "" . endfor .endfor .for group in ${OPTIONS_GROUP} @${ECHO_MSG} "====> Options available for the group ${group}" . for opt in ${OPTIONS_GROUP_${group}} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n " ${opt}=off" . else @${ECHO_MSG} -n " ${opt}=on" . endif . if !empty(${opt}_DESC) @${ECHO_MSG} -n ": "${${opt}_DESC:Q} . endif @${ECHO_MSG} "" . endfor .endfor .undef multi .undef single .undef radio .undef group .undef opt @${ECHO_MSG} "===> Use 'make config' to modify these settings" .endif .endif # showconfig .if !target(showconfig-recursive) showconfig-recursive: @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME} and dependencies"; @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} showconfig); \ done .endif # showconfig-recursive .if !target(rmconfig) rmconfig: .if exists(${OPTIONSFILE}) -@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \ optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \ if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \ ${ECHO_MSG} "===> Switching to root credentials to remove ${OPTIONSFILE} and $${optionsdir}"; \ ${SU_CMD} "${RM} -f ${OPTIONSFILE} ; \ ${RMDIR} $${optionsdir}"; \ ${ECHO_MSG} "===> Returning to user credentials"; \ else \ ${RM} -f ${OPTIONSFILE}; \ ${RMDIR} $${optionsdir} 2>/dev/null || return 0; \ fi .else @${ECHO_MSG} "===> No user-specified options configured for ${PKGNAME}" .endif .endif # rmconfig .if !target(rmconfig-recursive) rmconfig-recursive: @${ECHO_MSG} "===> Removing user-specified options for ${PKGNAME} and dependencies"; @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} rmconfig); \ done .endif # rmconfig-recursive .if !target(pretty-print-config) pretty-print-config: .for opt in ${ALL_OPTIONS} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n "-${opt} " . else @${ECHO_MSG} -n "+${opt} " . endif .endfor .for multi in ${OPTIONS_MULTI} @${ECHO_MSG} -n "${multi}[ " . for opt in ${OPTIONS_MULTI_${multi}} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n "-${opt} " . else @${ECHO_MSG} -n "+${opt} " . endif . endfor @${ECHO_MSG} -n "] " .endfor .for single in ${OPTIONS_SINGLE} @${ECHO_MSG} -n "${single}( " . for opt in ${OPTIONS_SINGLE_${single}} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n "-${opt} " . else @${ECHO_MSG} -n "+${opt} " . endif . endfor @${ECHO_MSG} -n ") " .endfor .for radio in ${OPTIONS_RADIO} @${ECHO_MSG} -n "${radio}( " . for opt in ${OPTIONS_RADIO_${radio}} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n "-${opt} " . else @${ECHO_MSG} -n "+${opt} " . endif . endfor @${ECHO_MSG} -n ") " .endfor .for group in ${OPTIONS_GROUP} @${ECHO_MSG} -n "${group}[ " . for opt in ${OPTIONS_GROUP_${group}} . if empty(PORT_OPTIONS:M${opt}) @${ECHO_MSG} -n "-${opt} " . else @${ECHO_MSG} -n "+${opt} " . endif . endfor @${ECHO_MSG} -n "] " .endfor .undef multi .undef single .undef radio .undef group .undef opt @${ECHO_MSG} "" .endif # pretty-print-config desktop-categories: @categories=""; \ for native_category in ${CATEGORIES}; do \ c=""; \ case $$native_category in \ accessibility) c="Utility Accessibility" ;; \ archivers) c="Utility Archiving" ;; \ astro) c="Education Science Astronomy" ;; \ audio) c="AudioVideo Audio" ;; \ benchmarks) c="System" ;; \ biology) c="Education Science Biology" ;; \ cad) c="Graphics Engineering" ;; \ comms) c="Utility" ;; \ converters) c="Utility" ;; \ databases) c="Office Database" ;; \ deskutils) c="Utility" ;; \ devel) c="Development" ;; \ dns) c="Network" ;; \ elisp) c="Development" ;; \ editors) c="Utility" ;; \ emulators) c="System Emulator" ;; \ finance) c="Office Finance" ;; \ ftp) c="Network FileTransfer" ;; \ games) c="Game" ;; \ geography) c="Education Science Geography" ;; \ gnome) c="GNOME GTK" ;; \ graphics) c="Graphics" ;; \ hamradio) c="HamRadio" ;; \ haskell) c="Development" ;; \ irc) c="Network IRCClient" ;; \ java) c="Development Java" ;; \ kde) c="KDE Qt" ;; \ lang) c="Development" ;; \ lisp) c="Development" ;; \ mail) c="Office Email" ;; \ math) c="Education Science Math" ;; \ mbone) c="Network AudioVideo" ;; \ multimedia) c="AudioVideo" ;; \ net) c="Network" ;; \ net-im) c="Network InstantMessaging" ;; \ net-mgmt) c="Network" ;; \ net-p2p) c="Network P2P" ;; \ news) c="Network News" ;; \ palm) c="Office PDA" ;; \ parallel) c="ParallelComputing" ;; \ pear) c="Development WebDevelopment" ;; \ perl5) c="Development" ;; \ python) c="Development" ;; \ ruby) c="Development" ;; \ rubygems) c="Development" ;; \ scheme) c="Development" ;; \ science) c="Science Education" ;; \ security) c="System Security" ;; \ shells) c="System Shell" ;; \ sysutils) c="System" ;; \ tcl*|tk*) c="Development" ;; \ textproc) c="Utility TextTools" ;; \ www) c="Network" ;; \ x11-clocks) c="Utility Clock" ;; \ x11-fm) c="System FileManager" ;; \ xfce) c="GTK XFCE" ;; \ zope) c="Development WebDevelopment" ;; \ esac; \ if [ -n "$$c" ]; then \ categories="$$categories $$c"; \ fi; \ done; \ if [ -n "$$categories" ]; then \ for c in $$categories; do ${ECHO_MSG} "$$c"; done \ | ${SORT} -u | ${TR} '\n' ';'; \ ${ECHO_MSG}; \ fi # http://standards.freedesktop.org/menu-spec/menu-spec-latest.html DESKTOP_CATEGORIES_MAIN= AudioVideo Audio Video Development Education \ Game Graphics Network Office Science Settings System Utility DESKTOP_CATEGORIES_ADDITIONAL= Building Debugger IDE GUIDesigner Profiling \ RevisionControl Translation Calendar ContactManagement Database \ Dictionary Chart Email Finance FlowChart PDA ProjectManagement \ Presentation Spreadsheet WordProcessor 2DGraphics VectorGraphics \ RasterGraphics 3DGraphics Scanning OCR Photography Publishing Viewer \ TextTools DesktopSettings HardwareSettings Printing PackageManager \ Dialup InstantMessaging Chat IRCClient Feed FileTransfer HamRadio News \ P2P RemoteAccess Telephony TelephonyTools VideoConference WebBrowser \ WebDevelopment Midi Mixer Sequencer Tuner TV AudioVideoEditing Player \ Recorder DiscBurning ActionGame AdventureGame ArcadeGame BoardGame \ BlocksGame CardGame KidsGame LogicGame RolePlaying Shooter Simulation \ SportsGame StrategyGame Art Construction Music Languages \ ArtificialIntelligence Astronomy Biology Chemistry ComputerScience \ DataVisualization Economy Electricity Geography Geology Geoscience \ History Humanities ImageProcessing Literature Maps Math \ NumericalAnalysis MedicalSoftware Physics Robotics Spirituality Sports \ ParallelComputing Amusement Archiving Compression Electronics Emulator \ Engineering FileTools FileManager TerminalEmulator Filesystem Monitor \ Security Accessibility Calculator Clock TextEditor Documentation Adult \ Core KDE GNOME XFCE GTK Qt Motif Java ConsoleOnly DESKTOP_CATEGORIES_RESERVED= Screensaver TrayIcon Applet Shell VALID_DESKTOP_CATEGORIES+= ${DESKTOP_CATEGORIES_MAIN} \ ${DESKTOP_CATEGORIES_ADDITIONAL} \ ${DESKTOP_CATEGORIES_RESERVED} check-desktop-entries: .if defined(DESKTOP_ENTRIES) @set -- ${DESKTOP_ENTRIES} XXX; \ if [ `${EXPR} \( $$# - 1 \) % 6` -ne 0 ]; then \ ${ECHO_MSG} "${PKGNAME}: Makefile error: the DESKTOP_ENTRIES list must contain one or more groups of 6 elements"; \ exit 1; \ fi; \ num=1; \ while [ $$# -gt 6 ]; do \ entry="#$$num"; \ if [ -n "$$4" ]; then \ entry="$$entry ($$4)"; \ elif [ -n "$$1" ]; then \ entry="$$entry ($$1)"; \ fi; \ if [ -z "$$1" ]; then \ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 1 (Name) is empty"; \ exit 1; \ fi; \ if ${ECHO_CMD} "$$3" | ${GREP} -iq '.\(png\|svg\|xpm\)$$'; then \ if ! ${ECHO_CMD} "$$3" | ${GREP} -iq '^/'; then \ ${ECHO_MSG} "${PKGNAME}: Makefile warning: in desktop entry $$entry: field 3 (Icon) should be either absolute path or icon name without extension if installed icons follow Icon Theme Specification"; \ fi; \ fi; \ if [ -z "$$4" ]; then \ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 4 (Exec) is empty"; \ exit 1; \ fi; \ if [ -n "$$5" ]; then \ for c in `${ECHO_CMD} "$$5" | ${TR} ';' ' '`; do \ if ! ${ECHO_CMD} ${VALID_DESKTOP_CATEGORIES} | ${GREP} -wq $$c; then \ ${ECHO_CMD} "${PKGNAME}: Makefile warning: in desktop entry $$entry: category $$c is not a valid desktop category"; \ fi; \ done; \ if ! ${ECHO_CMD} "$$5" | ${GREP} -q "`${ECHO_CMD} ${DESKTOP_CATEGORIES_MAIN} | ${SED} -E 's,[[:blank:]]+,\\\|,g'`"; then \ ${ECHO_CMD} "${PKGNAME}: Makefile warning: in desktop entry $$entry: field 5 (Categories) must contain at least one main desktop category (make -VDESKTOP_CATEGORIES_MAIN)"; \ fi; \ if ! ${ECHO_CMD} "$$5" | ${GREP} -q ';$$'; then \ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) does not end with a semicolon"; \ exit 1; \ fi; \ else \ if [ -z "`cd ${.CURDIR} && ${MAKE} desktop-categories`" ]; then \ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) is empty and could not be deduced from the CATEGORIES variable"; \ exit 1; \ fi; \ fi; \ if [ "x$$6" != "xtrue" ] && [ "x$$6" != "xfalse" ] && [ "x$$6" != "x" ]; then \ ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is not \"true\", \"false\" or \"\"(empty)"; \ exit 1; \ fi; \ shift 6; \ num=`${EXPR} $$num + 1`; \ done .else @${DO_NADA} .endif .if !target(install-desktop-entries) install-desktop-entries: .if defined(DESKTOP_ENTRIES) @(${MKDIR} "${DESKTOPDIR}" 2> /dev/null) || \ (${ECHO_MSG} "===> Cannot create ${DESKTOPDIR}, check permissions"; exit 1) @set -- ${DESKTOP_ENTRIES} XXX; \ if [ -z "${_DESKTOPDIR_REL}" ]; then \ ${ECHO_CMD} "@cwd ${DESKTOPDIR}" >> ${TMPPLIST}; \ fi; \ while [ $$# -gt 6 ]; do \ filename="`${ECHO_CMD} "$$4" | ${SED} -e 's,^/,,g;s,[/ ],_,g;s,[^_[:alnum:]],,g'`.desktop"; \ pathname="${DESKTOPDIR}/$$filename"; \ categories="$$5"; \ if [ -z "$$categories" ]; then \ categories="`cd ${.CURDIR} && ${MAKE} desktop-categories`"; \ fi; \ ${ECHO_CMD} "${_DESKTOPDIR_REL}$$filename" >> ${TMPPLIST}; \ ${ECHO_CMD} "[Desktop Entry]" > $$pathname; \ ${ECHO_CMD} "Type=Application" >> $$pathname; \ ${ECHO_CMD} "Version=1.0" >> $$pathname; \ ${ECHO_CMD} "Name=$$1" >> $$pathname; \ comment="$$2"; \ if [ -z "$$2" ]; then \ comment="`cd ${.CURDIR} && ${MAKE} -VCOMMENT`"; \ fi; \ ${ECHO_CMD} "GenericName=$$comment" >> $$pathname; \ ${ECHO_CMD} "Comment=$$comment" >> $$pathname; \ if [ -n "$$3" ]; then \ ${ECHO_CMD} "Icon=$$3" >> $$pathname; \ fi; \ ${ECHO_CMD} "Exec=$$4" >> $$pathname; \ ${ECHO_CMD} "Categories=$$categories" >> $$pathname; \ if [ -n "$$6" ]; then \ ${ECHO_CMD} "StartupNotify=$$6" >> $$pathname; \ fi; \ shift 6; \ done; \ ${ECHO_CMD} "@unexec rmdir ${DESKTOPDIR} 2>/dev/null || true" >> ${TMPPLIST}; \ if [ -z "${_DESKTOPDIR_REL}" ]; then \ ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ fi .else @${DO_NADA} .endif .endif .if !target(check-license) check-license: @${DO_NADA} .endif .if !target(ask-license) ask-license: @${DO_NADA} .endif .if !target(install-license) install-license: @${DO_NADA} .endif .endif # End of post-makefile section. .endif # End of the DESTDIR if statement