# New ports collection makefile for: postfix
# Date created: 18 Mar 1999
# Whom: torstenb
#
# $FreeBSD$
#
# To pre-select options in batch mode, run make like this:
#
# make -DBATCH POSTFIX_OPTIONS="DB3 TLS"
#
# the options are the same names as in the scripts/configure.postfix file.
# POSTFIX_OPTIONS can be set in /etc/make.conf also.
# NOTE: PCRE is enabled by default unless you specifically disable it.
PORTNAME= postfix
PORTVERSION= 2.2.5
PORTEPOCH= 1
CATEGORIES= mail ipv6
MASTER_SITES= ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
ftp://ftp.aet.tu-cottbus.de/pub/postfix_tls/%SUBDIR%/ \
ftp://ftp.tux.org/pub/net/postfix/official/ \
ftp://ftp.utoronto.ca/mirror/packages/postfix/official/ \
ftp://ftp.samurai.com/pub/postfix/official/ \
${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/mail/postfix/official/&,}
MASTER_SITE_SUBDIR= . old related/postfix
DISTNAME= postfix-${PORTVERSION}
DIST_SUBDIR= ${PORTNAME}
MAINTAINER= vivek@khera.org
COMMENT= A secure alternative to widely-used Sendmail
CONFLICTS= courier-0.* postfix-1.* postfix-2.0.* postfix-2.1.* postfix-2.3.* \
sendmail-8.* sendmail-*-8.* smail-3.* zmailer-2.*
USE_SUBMAKE= yes
USE_REINPLACE= yes
MAN1= postalias.1 postcat.1 postconf.1 postdrop.1 postfix.1 postkick.1 \
postlock.1 postlog.1 postmap.1 postqueue.1 postsuper.1 sendmail.1
MAN5= access.5 aliases.5 canonical.5 cidr_table.5 generic.5 header_checks.5 \
ldap_table.5 master.5 mysql_table.5 nisplus_table.5 pcre_table.5 \
pgsql_table.5 postconf.5 regexp_table.5 relocated.5 transport.5 \
virtual.5
MAN8= anvil.8 bounce.8 cleanup.8 discard.8 error.8 flush.8 lmtp.8 local.8 \
master.8 oqmgr.8 pickup.8 pipe.8 proxymap.8 qmgr.8 qmqpd.8 scache.8 \
showq.8 smtp.8 smtpd.8 spawn.8 tlsmgr.8 trivial-rewrite.8 verify.8 \
virtual.8
MLINKS= sendmail.1 mailq.1 \
sendmail.1 newaliases.1 \
header_checks.5 body_checks.5 \
bounce.8 defer.8 \
bounce.8 trace.8
CONF1= access aliases canonical generic header_checks main.cf master.cf \
relocated transport virtual
.if !defined(DEBUG)
MAKEFILEFLAGS+= DEBUG=
.endif
MAKEFILEFLAGS+= CC="${CC}" OPT="${CFLAGS}"
SCRIPTS_ENV= WRKDIRPREFIX="${WRKDIRPREFIX}" \
TOUCH="${TOUCH}" \
MKDIR="${MKDIR}" \
POSTFIX_OPTIONS="${POSTFIX_OPTIONS}"
pre-fetch:
@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/configure.postfix
.if exists(${WRKDIRPREFIX}${.CURDIR}/Makefile.inc)
.include "${WRKDIRPREFIX}${.CURDIR}/Makefile.inc"
.endif
.if defined(WITHOUT_PCRE)
POSTFIX_CCARGS+= -DNO_PCRE
.else
LIB_DEPENDS+= pcre.0:${PORTSDIR}/devel/pcre
POSTFIX_CCARGS+= -DHAS_PCRE -I${LOCALBASE}/include
POSTFIX_AUXLIBS+= -L${LOCALBASE}/lib -lpcre
.endif
post-patch:
(cd ${WRKSRC} && ${MAKE} -f Makefile.init makefiles ${MAKEFILEFLAGS} \
CCARGS="${POSTFIX_CCARGS}" AUXLIBS="${POSTFIX_AUXLIBS}" && \
${ECHO} "all: default" >> Makefile)
pre-patch:
@${ECHO} "See header_checks.5.html" > ${WRKSRC}/html/body_checks.5.html
@for f in `${FIND} -P ${WRKSRC}/man -type f`; do \
${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" $${f}; \
done
@for f in `${FIND} -P ${WRKSRC}/README_FILES -type f`; do \
${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" $${f}; \
done
@for f in `${FIND} -P ${WRKSRC}/conf -type f`; do \
${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" $${f}; \
done
pre-install:
@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX="${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
.if defined(NOPORTDOCS)
READMEDIR=no
.else
READMEDIR=${PREFIX}/share/doc/postfix
.endif
do-install:
cd ${WRKSRC}; ${SH} postfix-install -non-interactive install_root=/ tempdir=/tmp \
config_directory=${PREFIX}/etc/postfix \
daemon_directory=${PREFIX}/libexec/postfix \
command_directory=${PREFIX}/sbin \
queue_directory=/var/spool/postfix \
sendmail_path=${PREFIX}/sbin/sendmail \
newaliases_path=${PREFIX}/bin/newaliases \
mailq_path=${PREFIX}/bin/mailq \
mail_owner=postfix \
setgid_group=maildrop \
manpage_directory=${PREFIX}/man \
sample_directory=${PREFIX}/etc/postfix \
readme_directory=${READMEDIR}
@${MKDIR} ${PREFIX}/etc/postfix/dist
.for f in ${CONF1}
${INSTALL_DATA} ${WRKSRC}/conf/${f} ${PREFIX}/etc/postfix/dist
.endfor
@${INSTALL_SCRIPT} \
${WRKSRC}/auxiliary/rmail/rmail \
${PREFIX}/bin/rmail
# optional TEST binaries
.for file in ${BIN1}
@${INSTALL_PROGRAM} ${WRKSRC}/bin/${file} ${PREFIX}/sbin
.endfor
.if !defined(NOPORTDOCS)
@${INSTALL} -d -o ${DOCOWN} -g ${DOCGRP} -m 555 ${DOCSDIR}
@cd ${WRKSRC}/html && ${INSTALL_DATA} *.html *.jpg *.png ${DOCSDIR} && \
${ECHO_MSG} "Installed HTML documentation in ${DOCSDIR}"
.endif
post-install:
@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX="${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
# need to fixup ${PREFIX}/etc/postfix/postfix-files to indicate compressed
# man pages, since the ports software compresses them after this step, and
# if we run etc/postfix/post-install again during package installation,
# it will complain about missing files.
@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
@${CAT} ${PKGMESSAGE}
post-clean:
@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
.include