# New ports collection makefile for: squid24 # Date created: Tue Mar 27 14:56:08 CEST 2001 # Whom: Adrian Chadd # # $FreeBSD$ # # Tunables not (yet) configurable via 'make config': # SQUID_{U,G}ID # Which user/group squid should run as (default: squid/squid). # The user and group will be created if they do not already exist using # a uid:gid of 100:100. # NOTE: before version 2.5.4_6, these settings defaulted to # nobody/nogroup. # If you wish to keep these settings, please define SQUID_UID=nobody and # SQUID_GID=nogroup in your make environment before you start the update. # NOTE2: # Before version 2.5.4_11 the numerical id chosen for SQUID_UID (and # SQUID_GID respectively) was the first free id greater than or equal 3128. # If you wish to move your squid user to id 100:100, run "make changeuser", # please see the changeuser target's definition for further information. # SQUID_LANGUAGES # A list of languages for which error page files should be installed # (default: all) # # E.g. use `make SQUID_LANGUAGES="English French"' if you want to # install the files for these languages only. # Use `make -VSQUID_LANGUAGES' or scroll down to this variable's # definition to see which values are valid. # # SQUID_DEFAULT_LANG # If you define SQUID_LANGUAGES, select which language should be the default # one (this variable defaults to English). This setting can be overwritten # with squid.conf's error_directory directive. # # SQUID_CONFIGURE_ARGS # Additional configuration options. # # To enable them, use e.g # `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install' # # The list below may be incomplete, please see the configure script # in the squid source distribution for the complete list of additional # options. # Note that you probably do not need to worry about these options in most # cases, they are included in case you want to experiment with them. # # --enable-dlmalloc # Compile and use the malloc package from Doug Lea # --enable-gnuregex # Compile and use the supplied GNUregex routines instead of BSD regex. # --enable-xmalloc-statistics # Show malloc statistics in status page # --enable-time-hack # Optimize time updates to one per second rather than calling gettimeofday() # --enable-cachemgr-hostname=some.hostname # Set an explicit hostname in cachemgr.cgi # --enable-truncate # Use truncate() rather than unlink() # --disable-unlinkd # Do not use "unlinkd" # --with-aufs-threads=N_THREADS # Tune the number of worker threads for the aufs object # --with-coss-membuf-size # COSS membuf size (default: 1048576 bytes) # PORTNAME= squid PORTVERSION= 2.5.9 PORTREVISION= 2 CATEGORIES= www MASTER_SITES= \ ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \ ftp://ftp.unimelb.edu.au/pub/cwis/servers/unix/squid/%SUBDIR%/ \ ftp://sunsite.auc.dk/pub/infosystems/squid/%SUBDIR%/ \ ftp://ftp.leo.org/pub/comp/general/infosys/www/servers/squid/%SUBDIR%/ \ ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid/&,} MASTER_SITE_SUBDIR= squid-2/STABLE DISTNAME= squid-2.5.STABLE9 DIST_SUBDIR= squid2.5 PATCH_SITES= http://www.squid-cache.org/Versions/v2/2.5/bugs/ PATCHFILES= squid-2.5.STABLE9-setcookie.patch \ squid-2.5.STABLE9-ftp_EPLF.patch \ squid-2.5.STABLE9-ftp_base_href.patch \ squid-2.5.STABLE9-acl_error.patch \ squid-2.5.STABLE9-date.patch \ squid-2.5.STABLE9-reload_into_ims.patch \ squid-2.5.STABLE9-delay_access_doc.patch \ squid-2.5.STABLE9-config_overflow.patch \ squid-2.5.STABLE9-bzero.patch \ squid-2.5.STABLE9-pid_t.patch \ squid-2.5.STABLE9-ctype.patch \ squid-2.5.STABLE9-defer_digest_fetch.patch \ squid-2.5.STABLE9-dup_content_length.patch \ squid-2.5.STABLE9-excess_data.patch PATCH_DIST_STRIP= -p1 MAINTAINER= tmseck@netcologne.de COMMENT= The successful WWW proxy cache and accelerator CONFLICTS= squid-2.[^5]* GNU_CONFIGURE= yes USE_BZIP2= yes USE_PERL5= yes USE_REINPLACE= yes SQUID_UID?= squid SQUID_GID?= squid MAN8= squid.8 docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt .if !defined(NOPORTDOCS) PORTDOCS= ${docs:T} .endif OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ SQUID_DELAY_POOLS "Enable delay pools" off \ SQUID_SNMP "Enable SNMP support" off \ SQUID_CARP "Enable CARP support" off \ SQUID_SSL "Enable SSL support for reverse proxies" off \ SQUID_PINGER "Install the icmp helper" off \ SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ SQUID_HTCP "Enable HTCP support" off \ SQUID_VIA_DB "Enable forward/via database" off \ SQUID_CACHE_DIGESTS "Enable cache digests" off \ SQUID_WCCP "Enable Web Cache Coordination Protocol" on \ SQUID_UNDERSCORES "Allow underscores in hostnames" on \ SQUID_CHECK_HOSTNAME "Do hostname checking" on \ SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \ SQUID_IDENT "Enable ident (RFC 931) lookups" on \ SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \ SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \ SQUID_PF "Enable transparent proxying with PF" off \ SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \ SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \ SQUID_AUFS "Enable the aufs storage scheme" off \ SQUID_COSS "Enable the COSS storage scheme" off \ SQUID_STACKTRACES "Create backtraces on fatal errors" off \ SQUID_RCNG "Install an rcNG startup script" on etc_files= rc.d/squid.sh squid/mib.txt squid/mime.conf.default \ squid/msntauth.conf.default squid/squid.conf.default icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ anthony-box2.gif anthony-c.gif anthony-compressed.gif \ anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ anthony-f.gif anthony-image.gif anthony-image2.gif \ anthony-layout.gif anthony-link.gif anthony-movie.gif \ anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ anthony-quill.gif anthony-script.gif anthony-sound.gif \ anthony-tar.gif anthony-tex.gif anthony-text.gif \ anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \ ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_FORWARDING_DENIED \ ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \ ERR_INVALID_REQ ERR_INVALID_RESP ERR_INVALID_URL \ ERR_LIFETIME_EXP ERR_NO_RELAY ERR_ONLY_IF_CACHED_MISS \ ERR_READ_ERROR ERR_READ_TIMEOUT ERR_SHUTTING_DOWN \ ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \ ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT libexec= cachemgr.cgi digest_pw_auth diskd ip_user_check \ msnt_auth ncsa_auth ntlm_auth \ pam_auth smb_auth smb_auth.sh squid_unix_group \ wb_auth wb_group wb_ntlmauth wbinfo_group.pl .if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" libexec+= unlinkd .endif sbin= RunAccel RunCache squidclient squid CONFIGURE_ARGS= --bindir=${PREFIX}/sbin --sysconfdir=${PREFIX}/etc/squid \ --datadir=${PREFIX}/etc/squid \ --libexecdir=${PREFIX}/libexec/squid \ --localstatedir=${PREFIX}/squid \ --enable-removal-policies="lru heap" .include # Authentication methods and modules: basic_auth= NCSA PAM MSNT SMB winbind external_acl= ip_user unix_group wbinfo_group winbind_group MAN8+= pam_auth.8 squid_unix_group.8 .if defined(WITH_SQUID_LDAP_AUTH) USE_OPENLDAP= yes CFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib MAN8+= squid_ldap_auth.8 squid_ldap_group.8 basic_auth+= LDAP external_acl+= ldap_group libexec+= squid_ldap_auth squid_ldap_group .endif .if !defined(NO_NIS) basic_auth+= YP libexec+= yp_auth .endif CONFIGURE_ARGS+= --enable-auth="basic ntlm digest" \ --enable-basic-auth-helpers="${basic_auth}" \ --enable-digest-auth-helpers="password" \ --enable-external-acl-helpers="${external_acl}" \ --enable-ntlm-auth-helpers="SMB winbind" # Selection of storage schemes: storage_schemes= ufs diskd null .if defined(WITH_SQUID_AUFS) storage_schemes+= aufs # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS CONFIGURE_ARGS+= --enable-async-io \ --with-pthreads CFLAGS+= ${PTHREAD_CFLAGS} .endif .if defined(WITH_SQUID_COSS) storage_schemes+= coss CONFIGURE_ARGS+= --with-aio .endif CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" # Other options set via 'make config': .if defined(WITH_SQUID_DELAY_POOLS) CONFIGURE_ARGS+= --enable-delay-pools .endif .if defined(WITH_SQUID_SNMP) CONFIGURE_ARGS+= --enable-snmp .endif .if defined(WITH_SQUID_CARP) CONFIGURE_ARGS+= --enable-carp .endif .if defined(WITH_SQUID_SSL) # we need to .include bsd.openssl.mk manually here because USE_OPENSSL only # works when it is defined before bsd.port{.pre}.mk is .included and this is # not possible when using OPTIONS .include "${PORTSDIR}/Mk/bsd.openssl.mk" CONFIGURE_ARGS+= --enable-ssl \ --with-openssl="${OPENSSLBASE}" CFLAGS+= -I${OPENSSLINC} LDFLAGS+= -I${LOCALBASE}/lib .endif .if defined(WITH_SQUID_PINGER) CONFIGURE_ARGS+= --enable-icmp libexec+= pinger .endif .if defined(WITH_SQUID_DNS_HELPER) CONFIGURE_ARGS+= --disable-internal-dns libexec+= dnsserver .endif .if defined(WITH_SQUID_HTCP) CONFIGURE_ARGS+= --enable-htcp .endif .if defined(WITH_SQUID_VIA_DB) CONFIGURE_ARGS+= --enable-forw-via-db .endif .if defined(WITH_SQUID_CACHE_DIGESTS) CONFIGURE_ARGS+= --enable-cache-digests .endif .if defined(WITHOUT_SQUID_WCCP) CONFIGURE_ARGS+= --disable-wccp .endif .if !defined(WITHOUT_SQUID_UNDERSCORES) CONFIGURE_ARGS+= --enable-underscores .endif .if defined(WITHOUT_SQUID_CHECK_HOSTNAME) CONFIGURE_ARGS+= --disable-hostname-checks .endif .if defined(WITH_SQUID_STRICT_HTTP) CONFIGURE_ARGS+= --disable-http-violations .endif .if defined(WITHOUT_SQUID_IDENT) CONFIGURE_ARGS+= --disable-ident-lookups .endif .if defined(WITH_SQUID_USERAGENT_LOG) CONFIGURE_ARGS+= --enable-useragent-log .endif .if defined(WITH_SQUID_ARP_ACL) CONFIGURE_ARGS+= --enable-arp-acl .endif .if defined(WITH_SQUID_PF) CONFIGURE_ARGS+= --enable-pf-transparent .if ${OSVERSION} < 502106 pf_includedir= ${LOCALBASE}/include/pf BUILD_DEPENDS+= ${pf_includedir}/net/pfvar.h:${PORTSDIR}/security/pf CFLAGS+= -I${pf_includedir} EXTRA_PATCHES+= ${WRKDIR}/pf_from_ports.patch .endif .endif # IPFilter-headers are not installed on FreeBSD 4 since 4.7-RELEASE, # they were not installed on FreeBSD 5 from 2002-03-26 (OSVERSION > 500032) to # 2003-06-27 (OSVERSION < 501101). # # Please see PR misc/44148 and the CVS log of src/include/Makefile for further # information. .if defined(WITH_SQUID_IPFILTER) .if (${OSVERSION} >= 470000 && ${OSVERSION} < 500000) || (${OSVERSION} > 500032 && ${OSVERSION} < 501101) IGNORE= "IPFilter headers are not part of the base system" .else CONFIGURE_ARGS+= --enable-ipf-transparent .endif .endif .if defined(WITH_SQUID_FOLLOW_XFF) EXTRA_PATCHES+= ${PATCHDIR}/follow_xff-2.5.patch \ ${PATCHDIR}/follow_xff-configure.patch CONFIGURE_ARGS+= --enable-follow-x-forwarded-for .endif .if defined(WITH_SQUID_STACKTRACES) CONFIGURE_ARGS+= --enable-stacktraces CFLAGS+= -g STRIP= "" .endif .if !defined(WITHOUT_SQUID_RCNG) USE_RC_SUBR= yes rc_del= rcold rc_state= rcng .else rc_del= rcng rc_state= rcold .endif # Languages: # # If you do not define SQUID_LANGUAGES yourself, all available language files # will be installed; the default language will be English. SQUID_LANGUAGES?= \ Bulgarian Catalan Czech Danish Dutch English Estonian Finnish \ French German Hebrew Hungarian Italian Japanese Korean Lithuanian \ Polish Portuguese Romanian Russian-1251 Russian-koi8-r Serbian \ Simplify_Chinese Slovak Spanish Swedish Traditional_Chinese Turkish SQUID_DEFAULT_LANG?= English CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \ --enable-default-err-language=${SQUID_DEFAULT_LANG} # Finally, add additional user specified configuration options: CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} CONFIGURE_ENV+= CFLAGS="${CFLAGS}" \ LDFLAGS="${LDFLAGS}" PLIST_DIRS= etc/squid/icons libexec/squid PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \ ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} .for d in ${SQUID_LANGUAGES} PLIST_DIRS+= etc/squid/errors/${d} PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,} .endfor PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid pre-patch: # Check whether we need to create the extra patch that makes pf(4) # visible to squid's configure script: .if defined(pf_includedir) @${SED} -e 's|%%PF_INCLUDEDIR%%|${pf_includedir}|g' \ -e 's|%%PF_AC_INCLUDEPATH%%|${pf_includedir:S,/,_,g}|g' \ ${PATCHDIR}/pf_from_ports.patch.in >${WRKDIR}/pf_from_ports.patch .endif post-patch: @${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS}|g' ${WRKSRC}/configure @${REINPLACE_CMD} -e 's|/etc|${PREFIX}/etc|g' ${WRKSRC}/doc/squid.8 @${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ -e 's|%%SQUID_GID%%|${SQUID_GID}|g' ${WRKSRC}/src/cf.data.pre pre-install: # Prevent installation of .orig files by deleting them. @${FIND} ${WRKSRC} -name '*.bak' -delete @${FIND} ${WRKSRC} -name '*.orig' -delete # create an rcOld/rcNG squid.sh: @${SED} -e 's|%%PREFIX%%|${PREFIX}|g' \ -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ -e 's|%%RC_SUBR%%|${RC_SUBR}|g' \ -e '/--begin ${rc_del}/,/--end ${rc_del}/d' \ -e '/--.*${rc_state}/d' ${FILESDIR}/squid.sh \ >${WRKDIR}/squid.sh pre-su-install: @${SETENV} squid_user=${SQUID_UID} squid_group=${SQUID_GID} \ PKG_PREFIX=${PREFIX} ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL post-install: .if defined(WITH_SQUID_PINGER) ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger .endif ${INSTALL_SCRIPT} ${WRKDIR}/squid.sh ${PREFIX}/etc/rc.d .if !defined(NOPORTDOCS) @${MKDIR} ${DOCSDIR} cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} .endif @${SETENV} PKG_PREFIX=${PREFIX} \ ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL changeuser: # Recover from the problem that earlier versions of this port created the # squid pseudo-user with an id greater than 999 which is not allowed in # FreeBSD's ports system. The port now uses id 100:100. # NOTE: # This target assumes that SQUID_GID is the primary group of SQUID_UID. If you # have a different setup, do not run this target! .if ${SQUID_UID:L} == nobody @${ECHO_CMD} "'nobody' is a system user, you do not need to execute"; \ ${ECHO_CMD} "this target!" ${FALSE} .endif @if [ `${ID} -u` -ne 0 ]; \ then ${ECHO_CMD} "Sorry, you must be root to use this target."; ${FALSE}; fi; \ current_uid=`id -u ${SQUID_UID}`; \ current_gid=`pw groupshow ${SQUID_GID}|cut -f 3 -d :`; \ ${ECHO_CMD} "I will remove this user:"; \ ${ID} -P $${current_uid}; \ ${ECHO_CMD} "and this group:"; \ pw groupshow ${SQUID_GID}; \ ${ECHO_CMD} "I will then re-create them with a user and group id of 100."; \ ${ECHO_CMD} "Then all files and directories under ${PREFIX} and /var that"; \ ${ECHO_CMD} "are owned by uid $${current_uid} will be chown(1)'ed."; \ ${ECHO_CMD} "After that, all files and directories that were accessible"; \ ${ECHO_CMD} "by group $${current_gid} will chgrp(1)'ed respectively."; \ ${ECHO_CMD} "Note that this assumes group '${SQUID_GID}' to be the primary"; \ ${ECHO_CMD} "group of user '${SQUID_UID}'. If you have a different setup"; \ ${ECHO_CMD} "please abort this target now."; \ read -p "Press RETURN to continue or CTRL-C to abort:" dummy ; \ ${ECHO_CMD} "OK, here we go:"; \ ${ECHO_CMD} "deleting user $${current_uid} and his primary group..."; \ pw userdel -u $${current_uid}; \ ${ECHO_CMD} "adding user ${SQUID_UID} with id 100..."; \ pw groupadd -n ${SQUID_GID} -g 100; \ pw useradd -n ${SQUID_UID} -u 100 -c "squid caching-proxy pseudo user" \ -d ${PREFIX}/squid -s /sbin/nologin -h - ; \ ${ECHO_CMD} "chown(1)'ing everything under ${PREFIX} from $${current_uid} to 100..."; \ ${FIND} -H ${PREFIX} -user $${current_uid} -exec ${CHOWN} 100 {} \; ; \ ${ECHO_CMD} "chgrp(1)'ing everything under ${PREFIX} from $${current_gid} to 100..."; \ ${FIND} -H ${PREFIX} -group $${current_gid} -exec ${CHOWN} :100 {} \; ; \ ${ECHO_CMD} "chown(1)'ing everything under /var from $${current_uid} to 100..."; \ ${FIND} -H /var -user $${current_uid} -exec ${CHOWN} 100 {} \; ; \ ${ECHO_CMD} "chgrp(1)'ing everything under /var from $${current_gid} to 100..."; \ ${FIND} -H /var -group $${current_gid} -exec ${CHOWN} :100 {} \; ; \ ${ECHO_CMD} "Finished." .include