# New ports collection makefile for: squid24 # Date created: Tue Mar 27 14:56:08 CEST 2001 # Whom: Adrian Chadd # # $FreeBSD$ # # Tunables not (yet) configurable via 'make config': # SQUID_{U,G}ID # Which user/group Squid should run as (default: squid/squid). # The user and group will be created if they do not already exist using # a uid:gid of 100:100. # NOTE: older versions of Squid defaulted to nobody/nogroup. # If you wish to run Squid as "nobody" (which is not recommended), please # define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment # before you start the update or installation of this port. # # Note: # Starting with Squid 3.1 SQUID_LANGUAGES and SQUID_DEFAULT_LANG are no longer # available and will be ignored. # # SQUID_CONFIGURE_ARGS # Additional configuration options. # # To enable them, use e.g # `make SQUID_CONFIGURE_ARGS="--enable-ntml-fail-open" install' # # The list below may be incomplete, please see the configure script # in the Squid source distribution for the complete list of additional # options. # Note that you probably do not need to worry about these options in most # cases, they are included in case you want to experiment with them. # # --enable-xmalloc-statistics # Show malloc statistics in status page # --enable-cachemgr-hostname=some.hostname # Make cachemgr.cgi default to this host # --disable-unlinkd # Do not use "unlinkd" # --with-aufs-threads=N_THREADS # Tune the number of worker threads for the aufs object # --with-filedescriptors=N # Force Squid to use N filedescriptors. # --enable-ntlm-fail-open # Enable NTLM fail open, where a helper that fails one of the # Authentication steps can allow Squid to still authenticate the user # --enable-x-accelerator-vary # Enable support for the X-Accelerator-Vary HTTP header. Can be used # to indicate variance within an accelerator setup. Typically used # together with other code that adds custom HTTP headers to the # requests. PORTNAME= squid PORTVERSION= 3.1.${SQUID_STABLE_VER} CATEGORIES= www ipv6 MASTER_SITES= ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \ http://mirrors.ccs.neu.edu/Squid/ \ ftp://ftp.fu-berlin.de/unix/www/squid/squid/ \ ftp://ftp.nl.uu.net/pub/unix/www/squid/ \ ftp://ftp.solnet.ch/mirror/squid/ \ ftp://ftp.ntua.gr/pub/www/Squid/squid/ \ http://mirror.aarnet.edu.au/pub/squid/squid/ \ ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid,} \ http://www.squid-cache.org/Versions/v3/3.1/ \ http://www3.us.squid-cache.org/Versions/v3/3.1/ \ http://www1.at.squid-cache.org/Versions/v3/3.1/ \ http://www2.de.squid-cache.org/Versions/v3/3.1/ \ http://www.eu.squid-cache.org/Versions/v3/3.1/ \ http://www1.ie.squid-cache.org/Versions/v3/3.1/ \ http://www1.jp.squid-cache.org/Versions/v3/3.1/ \ http://www1.za.squid-cache.org/Versions/v3/3.1/ MASTER_SITE_SUBDIR= squid DIST_SUBDIR= squid3.1 PATCH_SITES= http://www.squid-cache.org/%SUBDIR%/ \ http://www2.us.squid-cache.org/%SUBDIR%/ \ http://www1.at.squid-cache.org/%SUBDIR%/ \ http://www2.de.squid-cache.org/%SUBDIR%/ \ http://www.eu.squid-cache.org/%SUBDIR%/ \ http://www1.ie.squid-cache.org/%SUBDIR%/ \ http://www1.jp.squid-cache.org/%SUBDIR%/ \ http://www2.tw.squid-cache.org/%SUBDIR%/ PATCH_SITE_SUBDIR= Versions/v3/3.1/changesets PATCHFILES= # empty MAINTAINER= tmseck@web.de COMMENT= HTTP Caching Proxy LICENSE= GPLv2 LICENSE_FILE= ${WRKSRC}/COPYING LATEST_LINK= squid31 SQUID_STABLE_VER= 19 CONFLICTS_INSTALL= squid-2.[0-9].* squid-3.[^1].* cacheboy-[0-9]* lusca-head-[0-9]* GNU_CONFIGURE= yes USE_BZIP2= yes USE_PERL5= yes USE_RC_SUBR= squid SQUID_UID?= squid SQUID_GID?= squid MAN1= squidclient.1 MAN8= cachemgr.cgi.8 squid.8 squid_radius_auth.8 docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt PORTDOCS= ${docs:T} PORTEXAMPLES= * SUB_FILES+= pkg-deinstall pkg-install pkg-message SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID} OPTIONS= SQUID_KERB_AUTH "Install Kerberos authentication helpers" on \ SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ SQUID_NIS_AUTH "Install NIS/YP authentication helpers" on \ SQUID_SASL_AUTH "Install SASL authentication helpers" off \ SQUID_IPV6 "Enable IPv6 support" on \ SQUID_DELAY_POOLS "Enable delay pools" off \ SQUID_SNMP "Enable SNMP support" on \ SQUID_SSL "Enable SSL support for reverse proxies" off \ SQUID_SSL_CRTD "Enable SSL certificate daemon" off \ SQUID_PINGER "Install the icmp helper" off \ SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ SQUID_HTCP "Enable HTCP support" on \ SQUID_VIA_DB "Enable forward/via database" off \ SQUID_CACHE_DIGESTS "Enable cache digests" off \ SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \ SQUID_WCCPV2 "Enable Web Cache Coordination Prot. v2" off \ SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \ SQUID_IDENT "Enable ident (RFC 931) lookups" on \ SQUID_REFERER_LOG "Enable Referer-header logging" off \ SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \ SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \ SQUID_IPFW "Enable transparent proxying with IPFW" off \ SQUID_PF "Enable transparent proxying with PF" off \ SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \ SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \ SQUID_ECAP "En. loadable content adaptation modules" off \ SQUID_ICAP "Enable ICAP client functionality" off \ SQUID_ESI "Enable ESI support (experimental)" off \ SQUID_AUFS "Enable the aufs storage scheme" on \ SQUID_COSS "Enable COSS (currently not available)" off \ SQUID_KQUEUE "Use kqueue(2) (experimental)" on \ SQUID_LARGEFILE "Support log and cache files >2GB" off \ SQUID_STACKTRACES "Create backtraces on fatal errors" off \ SQUID_DEBUG "Enable debugging options" off etc_files= squid/cachemgr.conf.default \ squid/errorpage.css.default \ squid/mib.txt \ squid/mime.conf.default \ squid/msntauth.conf.default \ squid/squid.conf.default \ squid/squid.conf.documented icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ anthony-box2.gif anthony-c.gif anthony-compressed.gif \ anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ anthony-f.gif anthony-image.gif anthony-image2.gif \ anthony-layout.gif anthony-link.gif anthony-movie.gif \ anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ anthony-quill.gif anthony-script.gif anthony-sound.gif \ anthony-tar.gif anthony-tex.gif anthony-text.gif \ anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \ ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ ERR_CONNECT_FAIL ERR_DIR_LISTING ERR_DNS_FAIL \ ERR_ESI ERR_FORWARDING_DENIED \ ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \ ERR_GATEWAY_FAILURE \ ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \ ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \ ERR_ONLY_IF_CACHED_MISS ERR_PRECONDITION_FAILED \ ERR_READ_ERROR ERR_READ_TIMEOUT \ ERR_SECURE_CONNECT_FAIL ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE \ ERR_TOO_BIG ERR_UNSUP_REQ ERR_UNSUP_HTTPVERSION \ ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT error_dirs= af ar az bg ca cs da de el en es et fa fi fr he hu hy id it \ ja ko lt lv ms nl oc pl pt pt-br ro ru sk sr-cyrl sr-latn sv \ th tr uk uz \ vi zh-cn zh-tw \ templates error_dir_links= ar-ae ar-bh ar-dz ar-eg ar-iq ar-jo ar-kw ar-lb \ ar-ly ar-ma ar-om ar-qa ar-sa ar-sy ar-tn ar-ye \ az-az bg-bg cs-cz da-dk \ de-at de-ch de-de de-li de-lu \ el-gr \ en-au en-bz en-ca en-gb en-ie en-in en-jm en-nz \ en-ph en-sg en-tt en-uk en-us en-za en-zw \ es-ar es-bo es-cl es-co es-cr es-do es-ec es-es \ es-gt es-hn es-mx es-ni es-pa es-pe es-pr es-py \ es-sv es-uy es-ve \ et-ee \ fa-fa fa-ir fi-fi \ fr-be fr-ca fr-ch fr-fr fr-lu fr-mc \ he-il hu-hu hy-am hy-armn id-id it-ch it-it \ ja-jp ko-kp ko-kr lt-lt lv-lv ms-my nl-nl \ pl-pl pt-pt ro-md ro-ro ru-ru sk-sk \ sr sr-latn-cs sr-sp sv-fi sv-se \ th-th tr-tr uk-ua vi-vn zh-hk zh-mo zh-sg libexec= cachemgr.cgi digest_pw_auth diskd ip_user_check \ msnt_auth ncsa_auth ntlm_smb_lm_auth pam_auth smb_auth \ smb_auth.sh squid_db_auth squid_radius_auth squid_session \ squid_unix_group wbinfo_group.pl .if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" libexec+= unlinkd .endif sbin= squidclient squid CONFIGURE_ARGS= --with-default-user=${SQUID_UID} \ --bindir=${PREFIX}/sbin \ --sbindir=${PREFIX}/sbin \ --datadir=${ETCDIR} \ --libexecdir=${PREFIX}/libexec/squid \ --localstatedir=/var/squid \ --sysconfdir=${ETCDIR} \ --with-logdir=/var/log/squid \ --with-pidfile=/var/run/squid/squid.pid \ --enable-removal-policies="lru heap" \ --disable-linux-netfilter \ --disable-linux-tproxy \ --disable-epoll \ --disable-translation .include # Authentication methods and modules: basic_auth= DB NCSA PAM MSNT SMB squid_radius_auth digest_auth= password external_acl= ip_user session unix_group wbinfo_group MAN8+= ncsa_auth.8 pam_auth.8 squid_db_auth.8 squid_session.8 \ squid_unix_group.8 .if defined(WITH_SQUID_LDAP_AUTH) USE_OPENLDAP= yes CFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib MAN8+= squid_ldap_auth.8 squid_ldap_group.8 basic_auth+= LDAP digest_auth+= ldap external_acl+= ldap_group libexec+= digest_ldap_auth squid_ldap_auth squid_ldap_group .endif .if defined(WITH_SQUID_SASL_AUTH) LIB_DEPENDS+= sasl2.2:${PORTSDIR}/security/cyrus-sasl2 CFLAGS+= -I${LOCALBASE}/include CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib basic_auth+= SASL libexec+= sasl_auth .endif # POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too: .if defined(WITH_SQUID_NIS_AUTH) && !defined(NO_NIS) && !defined(WITHOUT_NIS) basic_auth+= YP libexec+= yp_auth .endif CONFIGURE_ARGS+= --enable-auth="basic digest negotiate ntlm" \ --enable-basic-auth-helpers="${basic_auth}" \ --enable-digest-auth-helpers="${digest_auth}" \ --enable-external-acl-helpers="${external_acl}" \ --enable-ntlm-auth-helpers="smb_lm" # POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too: .if defined(WITH_SQUID_KERB_AUTH) && !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS) CONFIGURE_ARGS+= --enable-negotiate-auth-helpers="squid_kerb_auth" libexec+= negotiate_kerb_auth negotiate_kerb_auth_test \ squid_kerb_auth squid_kerb_auth_test .endif # Storage schemes: storage_schemes= ufs diskd # TODO: should AIO be optional as well? diskio_modules= AIO Blocking DiskDaemon .if defined(WITH_SQUID_AUFS) storage_schemes+= aufs diskio_modules+= DiskThreads # Only document switching from libpthread to libthr using libmap.conf # where lipthread is the default threading library: .if ${OSVERSION} < 700041 EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs .endif # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS, # e.g. SQUID_CONFIGURE_ARGS=--with-aufs-threads=N CFLAGS+= ${PTHREAD_CFLAGS} .else CONFIGURE_ARGS+= --without-pthreads .endif .if defined(WITH_SQUID_COSS) # COSS is currently disabled in Squid-3 until fixes from the 2.x series are # backported to 3.x. #storage_schemes+= coss .endif CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" CONFIGURE_ARGS+= --enable-disk-io="${diskio_modules}" # Other options set via 'make config': .if defined(WITHOUT_SQUID_IPV6) || defined(WITHOUT_IPV6) CONFIGURE_ARGS+= --disable-ipv6 .endif .if defined(WITH_SQUID_DELAY_POOLS) CONFIGURE_ARGS+= --enable-delay-pools .endif .if defined(WITHOUT_SQUID_SNMP) CONFIGURE_ARGS+= --disable-snmp .endif .if defined(WITH_SQUID_SSL) # we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only # works when it is defined before bsd.port{.pre}.mk is .included. # This makes it currently impossible to combine this macro with OPTIONS to # conditionally include OpenSSL support. .include "${PORTSDIR}/Mk/bsd.openssl.mk" CONFIGURE_ARGS+= --enable-ssl \ --with-openssl="${OPENSSLBASE}" CFLAGS+= -I${OPENSSLINC} LDFLAGS+= -L${OPENSSLLIB} .endif .if defined(WITH_SQUID_SSL_CRTD) CONFIGURE_ARGS+= --enable-ssl-crtd libexec+= ssl_crtd .endif .if defined(WITH_SQUID_PINGER) CONFIGURE_ARGS+= --enable-icmp libexec+= pinger .endif .if defined(WITH_SQUID_DNS_HELPER) CONFIGURE_ARGS+= --disable-internal-dns libexec+= dnsserver .endif .if defined(WITHOUT_SQUID_HTCP) CONFIGURE_ARGS+= --disable-htcp .endif .if defined(WITH_SQUID_VIA_DB) CONFIGURE_ARGS+= --enable-forw-via-db .endif .if defined(WITH_SQUID_CACHE_DIGESTS) CONFIGURE_ARGS+= --enable-cache-digests .endif .if defined(WITHOUT_SQUID_WCCP) CONFIGURE_ARGS+= --disable-wccp .endif .if defined(WITH_SQUID_WCCPV2) CONFIGURE_ARGS+= --enable-wccpv2 .endif .if defined(WITH_SQUID_STRICT_HTTP) CONFIGURE_ARGS+= --disable-http-violations .endif .if defined(WITHOUT_SQUID_IDENT) CONFIGURE_ARGS+= --disable-ident-lookups .endif .if defined(WITH_SQUID_REFERER_LOG) CONFIGURE_ARGS+= --enable-referer-log .endif .if defined(WITH_SQUID_USERAGENT_LOG) CONFIGURE_ARGS+= --enable-useragent-log .endif .if defined(WITH_SQUID_ARP_ACL) CONFIGURE_ARGS+= --enable-arp-acl .endif .if defined(WITH_SQUID_IPFW) CONFIGURE_ARGS+= --enable-ipfw-transparent .endif .if defined(WITH_SQUID_PF) CONFIGURE_ARGS+= --enable-pf-transparent .endif .if defined(WITH_SQUID_IPFILTER) CONFIGURE_ARGS+= --enable-ipf-transparent .endif .if defined(WITH_SQUID_FOLLOW_XFF) CONFIGURE_ARGS+= --enable-follow-x-forwarded-for .endif .if defined(WITH_SQUID_ECAP) CONFIGURE_ARGS+= --enable-ecap --enable-loadable-modules LIB_DEPENDS+= ecap:${PORTSDIR}/www/libecap CFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib .else CONFIGURE_ARGS+= --disable-ecap --disable-loadable-modules .endif .if defined(WITH_SQUID_ICAP) CONFIGURE_ARGS+= --enable-icap-client .endif .if defined(WITH_SQUID_ESI) CONFIGURE_ARGS+= --enable-esi LIB_DEPENDS+= expat:${PORTSDIR}/textproc/expat2 \ xml2:${PORTSDIR}/textproc/libxml2 CFLAGS+= -I${LOCALBASE}/include -I${LOCALBASE}/include/libxml2 LDFLAGS+= -L${LOCALBASE}/lib .endif .if defined(WITHOUT_SQUID_KQUEUE) # Squid-3's kqueue support is still marked as experimental, so it is not yet # enabled automatically as in Squid-2. We are explicit about disabling it, # nonetheless: CONFIGURE_ARGS+= --disable-kqueue .else CONFIGURE_ARGS+= --enable-kqueue .endif .if defined(WITH_SQUID_LARGEFILE) CONFIGURE_ARGS+= --with-large-files .endif .if defined(WITH_SQUID_STACKTRACES) CONFIGURE_ARGS+= --enable-stacktraces CFLAGS+= -g STRIP= .endif .if defined(WITH_SQUID_DEBUG) || defined(WITH_DEBUG) # TODO: are there other useful options that can/should be set to help # the developers in debugging failures? CONFIGURE_ARGS+= --disable-optimizations WITH_DEBUG?= yes .endif # Finally, add additional user specified configuration options: CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} PLIST_DIRS= %%ETCDIR%%/icons libexec/squid PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,%%ETCDIR%%/icons/,} \ ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} PLIST_FILES+= %%ETCDIR%%/errors/COPYRIGHT %%ETCDIR%%/errors/TRANSLATORS .for d in ${error_dirs} PLIST_DIRS+= %%ETCDIR%%/errors/${d} PLIST_FILES+= ${error_files:S,^,%%ETCDIR%%/errors/${d}/,} .endfor PLIST_FILES+= ${error_dir_links:S,^,%%ETCDIR%%/errors/,} PLIST_DIRS+= %%ETCDIR%%/errors PLIST_DIRSTRY+= %%ETCDIR%% post-patch: @${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \ ${WRKSRC}/src/cf.data.pre @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \ ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh pre-install: # Prevent installation of .orig files by deleting them. @${FIND} ${WRKSRC} -name '*.bak' -delete @${FIND} ${WRKSRC} -name '*.orig' -delete pre-su-install: @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \ ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL post-install: .if !defined(NOPORTEXAMPLES) @${MKDIR} ${EXAMPLESDIR} ${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR} .endif .if defined(WITH_SQUID_PINGER) ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger .endif .if !defined(NOPORTDOCS) @${MKDIR} ${DOCSDIR} cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} .endif @${SETENV} PKG_PREFIX=${PREFIX} \ ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:" @${ECHO_CMD} "" @${CAT} ${PKGMESSAGE} @${ECHO_CMD} "" .if defined(WITH_SQUID_COSS) @${ECHO_CMD} "Note: COSS support is currently not available in Squid-3." @${ECHO_CMD} "Please check your squid.conf and comment out any 'cache_dir coss' definitions." @${ECHO_CMD} "" .endif .include