path: root/CHANGES

Updating Information for FreeBSD ports developers

This file is maintained by Erwin Lansing <erwin@FreeBSD.org> and
copyrighted by the FreeBSD Foundation.

This file contains major changes to ports and the ports infrastructure.
Intended audience are ports committers, maintainers and other
developers. User oriented changes should be submitted for inclusion
in the release notes.

All ports committers are allowed to commit to this file.

20060804:
AUTHOR: gabor@FreeBSD.org
The following functional changes were made to bsd.*.mk and to 
Tools/scripts/security-check.awk:

  * Add DESTDIR support to let one install ports into a jail from outside.
    A package is installed under ${DESTDIR}${PREFIX} now and registered under
    ${DESTDIR}/var/db/pkg.

  * TARGETDIR variable has been added for referencing ${DSTDIR}${PREFIX}.

  * LOCALBASE, LINUXBASE and X11BASE variables point to the final destination
    now, LOCALBASE_REL, LINUXBASE_REL and X11BASE_REL can be used for the
    old behavior.  The behavior has not been changed in PLIST_SUB.
    Note, that the three variables are still overrideable with a hack, so this
    change doesn't affect POLA, but necessary for DESTDIR support.

  * OSVERSION is now determined from the userland, not from the kernel.
    Cross-compiling between releases is still not supported, but this
    behavior is more correct for jails with different kernel version as well.

  * Add some sanity check for PREFIX and DESTDIR.  This can be skipped by
    defining IGNORE_PATH_CHECKS, but very discouraged.

  * Deinstalling from DESTDIR, determining if a port is already installed in
    DESTDIR, etc. are implemented by chrooting those specific commands.

  * Text changes to reflect that we are installing to DESTDIR, removing from
    DESTDIR, etc.

Note, that this change implements only the infrastructure support.  Ports should
also be implemented to respect DESTDIR.

20060717:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:

  * Introduces IA32_BINARY_PORT for certain cases where a given port fetches
    and installs compiled i386 binaries.

  * Adds some infrastructure for support of 32-bit i386 apps on amd64.

  * Again fix USE_LDCONFIG logic to make it work with non-default PREFIX to
    fix bug introduced in previous revision.

20060705:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:

  * Change all bogus uses of BROKEN to IGNORE.  (Note: the BROKEN_WITH_*
    forms are retained for compatibility but deprecated.)  Internally,
    these variables all had already set IGNORE, not BROKEN, so they
    were really misnomers.

  * Fix USE_LDCONFIG with non-default PREFIX.

  * Fix DESKTOP_ENTRIES processing on 4.x.

  * Add 'make missing' to show missing dependencies.

  * Add bsd.scons.mk and bsd.wx.mk.

20060616:
AUTHOR: portmgr@FreeBSD.org
  The patch in ports/95841 to get rid of remnants of FORCE_PKG_REGISTER
  was backed out because it broke kdelibs3*.

20060616:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:

  * Update default MySQL version from 4.1 to 5.0 [1]

  * Update default PHP version from 4 to 5 [2]

  * Update default LDAP version from 2.2 to 2.3 [3]

  * Add support for LDAP version 2.4 [4]

  * Update default linux_base from '8' (Redhat 8) to 'fc4' (Fedora Core 4) [5]

  * Switch default Linux X implementation from XFree86 to xorg to track the
    above [5]

  * Deprecate INSTALLS_SHLIB and replace it by USE_LDCONFIG.  If set to "yes",
    the old behavior is preserved.  Otherwise, it can be set to a list of
    directories to be added to ${PREFIX}/libdata/ldconfig/${UNIQUENAME}.
    Note that this directory is used by ldconfig startup script, it is meant
    to replace ldconfig scripts installed by some ports as (sometimes
    000.${UNQUENAME}.sh) [6]

  * Adds USE_LDCONFIG32 which is like USE_LDCONFIG but the target file is
    ${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead.  (Note: this should
    only be used on 64-bit architectures) [6]

  * Set the default LANG for tr to be C to avoid some build problems [7]

  * Include bsd.java.mk in both pre and post sections [8]

  * Get rid of remnants of FORCE_PKG_REGISTER [9]

  * Always print options with make showconfig [10]

  PR:   92805 [1], 92806 [2], 96793 [3], 97515 [4], 96849 [5],
    91933 [6], 91381 [7], 97020 [8], 95841 [9], 97133 [10]

20060523:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:

  * include bsd.emacs.mk only when USE_EMACS is set [5]

  * Correct the implementation of pretty-print-run-depends-list [8]

  * Use a consistent name for the cookies file when PKGNAMEPREFIX/SUFFIX
    are set after bsd.port.pre.mk. [9]

  * Include bsd.tcl.mk if USE_TCL_BUILD is defined [10]

  * Set PERL_MM_USE_DEFAULT in BATCH mode [11]

  * Add the {ONLY,NOT}_FOR_ARCH_REASON and
    {ONLY,NOT}_FOR_ARCH_REASON_${ARCH} variables to allow better
    customization of the error string reported to users when they
    attempt a build on an unsupported architecture. [12]

  * Avoid errors from duplicated targets when parsing MLINKS on ports
    without a default value set. [13]

  * Fix handling of MLINKS when invalid entries are listed [14]

  * Enforce sanity of DESKTOP_ENTRIES.  If the Categories field is
    omitted, try to map ports categories to their freedesktop.org
    counterpart [15]

  PR:     95238 [5], 94164 [8], 94219 [9], 92355 [10],
          95579 [11], 94675 [12], 66109 [13], 66110 [14], 95603 [15]

20060121:
AUTHOR: portmgr@FreeBSD.org
The following changes affecting ports developers were introduced:

  * Gamin is a default FAM system

  * New virtual categories: hamradio and rubygems

  * Virtual category offix was removed

  * New USE_DOS2UNIX variable for converting DOS linefeeds to UNIX

  * Variables like BROKEN and FORBIDDEN should no longer be quoted

  * New NOFETCHFILES variable to prevent downloading from MASTER_SITES
    while still allowing MASTER_SITE_OVERRIDE

  * New plist macro @dirrmtry with functionality of @unexec rmdir || true

  * USE_REINPLACE no longer needs to be defined, REINPLACE_CMD is always
    available

Detailed documentation of new features is available in Porter's Handbook.

20051108:
AUTHOR: portmgr@FreeBSD.org
The following changes were introduced:
  * Add bsd.database.mk
    - move out from bsd.port.mk USE_MYSQL and USE_PGSQL.
    - add support for Berkeley DB and SQLite (via USE_BDB and USE_SQLITE
      knobs).

  * Espace '+' in make search

  * Add "makepatch" target to simplify creation of patches during porting

  * Replace deprecated MACHINE_ARCH with ARCH

  * Remove support of OpenLDAP 2.1

  * Add bsd.tcl.mk
    It introduces USE_TCL/USE_TCL_BUILD knobs to support various
    version of tcl (8.0 -> 8.4)

  * Fix cosmetic bugs in security-check target

  * Add support for INDEX-7 and above (up to INDEX-9 actually)

  * Add "package-recursive" to bsd.port.subdir.mk

  * Remove check for FreeBSD version < 460101

  * New category: net-im

  * Add .desktop file facilities
    It introduces DESKTOPDIR and DESKTOP_ENTRIES knobs

  * Add SHA256 support to "*checksum" targets

  * Fix USE_PYTHON with OPTIONS

  * Force NO_LINT to MAKE_ENV to avoid library breaks

  * Fix typo: s/RC_ORDER/USE_RCORDER/g

  * Add support for PostgreSQL 8.1

  * Add bsd.apache.mk
    USE_APACHE knob enhancements

20051105:
AUTHOR: gnome@FreeBSD.org
  GNOME has been upgraded from 2.10.2 to 2.12.1.  This update brings with
  it many important porting changes:

  - gtk20's pkg-config file no longer contains the X11 pango modules.
    Therefore, if your port requires these modules, you may have to
    manually patch them in to your port's Makefiles.  Contact
    gnome@FreeBSD.org if you have questions on this.

  - A new USE_GNOME component, ltverhack, has been added.  This
    pseudo-component hacks libtool so that shared library versions are
    more consistent with other operating systems.  Using this component
    can prevent unnecessary shared library version changes.

  - A new macro, INSTALLS_ICONS, has been added.  If your port installs
    Freedesktop-style icons to ${LOCALBASE}/share/icons or
    ${X11BASE}/share/icons, then you should use this macro.  NOTE:
    use of this macro requires your port to set either USE_GNOME or
    WANT_GNOME.

20050618:
AUTHOR: netchild@FreeBSD.org
  - USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
    tools to strip binaries anymore, so it's not necessary anymore to override
    STRIP and STRIP_CMD.
  - USE_LINUX_PREFIX implies NO_MTREE now.
  - In the USE_LINUX case, USE_XLIB now depends upon the Linux X11 libraries
    instead upon the native FreeBSD libraries.
  - The variable LINUX_BASE_PORT contains a string which is suitable as an
    item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
    default (or overridden) Linux base, ${LINUX_BASE_PORT} should be used+
    instead of a hardcoded reference.
  - If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
    port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
    be marked as IGNORE.

20050609:
AUTHOR: portmgr@FreeBSD.org
The following changes were introduced:

  * Improve documentation of CONFLICTS.

  * Fix add-plist-docs target to work correctly with wildcards.

  * Fix USE_MYSQL and USE_PGSQL knobs to work in partitial ports
    tree.

  * Introduce 2 new variables: USE_FAM and WANT_FAM_SYSTEM.

  * Suppress "Vulnerability check disabled" message if
    DISABLE_VULNERABILITIES is defined.

  * Switch default MySQL version to 4.1

  * Add support for OpenLDAP v.23

  * Fix add-plist-info and add-plist-post targets to avoid warnings
    from ports which redefine them.

  * Fix add-plist-docs target to handle NOPORTDOCS knob properly.

  * Use INSTALLDIRS="site" in configure for perl ports.

  * Fix NO_(CHECKSUM|BUILD|INSTALL|PACKAGE) knobs if OPTIONS are
    defined.

  * Add an ability to depend on versioned installed package.
    Example:

          BUILD_DEPENDS=p5-Tree-Simple>=1.12:${PORTSDIR}/devel/p5-Tree-Simple

    Please note, it's experimental feature, work is currently in
    progress.

20050325:
AUTHOR: jdp@FreeBSD.org
  The CVSup port has been upgraded with a patch to correct the
  handling of the "refuse" file for files that are in the CVS Attic.
  This solves a problem some people were having, where CVSup would
  delete their ports/INDEX* files even though the files were listed
  in the "refuse" file.  The bug fix is in the cvsupd server, so
  mirror sites  must upgrade their servers in order for this fix to
  help.  Meanwhile, adding "ports/Attic/INDEX*" to the refuse file
  serves as a work-around.

20050321:
AUTHOR: kwm@FreeBSD.org
  The gstreamer-plugins gconf dependency moved to its own port in devel.
  When your application needs gstreamer-plug-gconf, just add
  USE_GSTREAMER=gconf to you Makefile

20050319:
AUTHOR: gnome@FreeBSD.org
  New GNOME components have been added to bsd.gnome.mk.  See
  http://www.FreeBSD.org/gnome/docs/gnome2_porting.html for the complete
  list of available GNOME 2 components.

  Py-gnome2 lost many of its GNOME dependencies to a new port,
  py-gnome-extras.  Therefore, ports that used to depend on
  the pygnome2 component for modules such as gtkhtml2, gnomepanel, etc.
  should replace the pygnome2 dependency with pygnomeextras.

20050314:
AUTHOR: edwin@FreeBSD.org
  New variable for in /etc/make.conf: IGNORE_MASTER_SITE_xxx

  If you prefer a certain mastersite for a collection of master-sites,
  set this in your /etc/make.conf:

    MASTER_SITE_xxx=http://z.x.y/%SUBDIR%/

  If you insist on only using the ones you specify, set this in
  your /etc/make.conf:

    IGNORE_MASTER_SITE_xxx=yes
    MASTER_SITE_xxx=http://z.x.y/%SUBDIR%/

  Use "make -V MASTER_SITES" to see the differences.


20050313:
AUTHOR: ahze@FreeBSD.org, kwm@FreeBSD.org
  The following changes were committed:

 * USE_GNOME=gstreamerplugins has been deprecated.
     The new method which uses bsd.gstreamer.mk is:
       USE_GSTREAMER=plugin-name

    Example:
     USE_GSTREAMER= dvd

     or

     WANT_GSTREAMER= yes
     .include <bsd.port.pre.mk>
     .if defined(WITH_DVD)
     USE_GSTREAMER= dvd
     .endif

  * misc/gnomehier now creates a mtree file and each port
    using USE_GNOME=gnomehier or gnomeprefix now use the
    BSD.gnome-x11.dist mtree file to help "keep" directories
    and not accidentally add gnome directories to a port.

20050207:
AUTHOR: portmgr@FreeBSD.org
  The following changes were committed:

  * Change bento to pointyhat names in comments.

  * Document DISABLE_VULNERABILITIES variable.

  * Add WWW: line for 'search' target.

  * Speedup check-vulnerable invocation, if portaudit is installed.

  * Run install-info for all .info files.

  * Run add-plist-docs more strictly and prevent some situations
    with leftover files in the future.

  * Introduce two new variables: MASTER_PORT and SLAVE_PORT.
    The results from these variables is only used as information for
    users.

  * Honor OPTIONS if PACKAGE_BUILDING or BATCH are defined.

  * Move all USE_GCC entries to new file - bsd.gcc.mk.  'test-gcc'
    target allows users to check gcc version if USE_GCC is used.
    Give maintainers opportunity to add '+' character to USE_GCC version
    for using specified and higher versions.

    Example:

    USE_GCC=3.3+

    builds ports with gcc version 3.3 and higher (3.4, 4.0).

  * Install startup scripts with the help of USE_RC_SUBR variable.

  * Add three new targets: config-recursive, rmconfig-recursive and
    config-conditional.  You can set or delete OPTIONS for all
    dependencies before every build.  config-conditional target is
    used to skip configuring ports which have already been
    configured.

  * Fix using of WANT_PGSQL_VER variable if postgresql is already
    installed.

20041231:
AUTHOR: netchild@FreeBSD.org
  USE_LINUX_PREFIX doesn't implies USE_LINUX anymore.

20041209:
AUTHOR: portmgr@FreeBSD.org
  The following changes were committed:

  * Define new macros: DATE, FMT, MKTEMP, OBJDUMP, and use
    command macro SORT.

  * Change layout of comments to 4 column tabs, remove lots
    of spaces and eight-column-tabs.

  * Introduce 2 new variables: SUB_FILES and SUB_LIST:

    Example:

    SUB_FILES=  pkg-message pkg-install
    SUB_LIST+=  "VERSION=${VERSION}"

    This looks for ${FILESDIR}/pkg-message.in and ${FILESDIR}/pkg-install.in
    Substitutions in SUB_LIST are applied to these files and the
    output is redirected to ${WRKDIR}.

    PKGMESSAGE will be set to ${WRKDIR}/pkg-message.
    PKGINSTALL will be set to ${WRKDIR}/pkg-install.

  * Document DEPRECATED and EXPIRATION_DATE variables.

  * Sanitize the intermittent output by the build infrastructure
    so that cutting and pasting from it no longer interferes
    with GNATS-tags.

  * Honor configure arguments for USE_XLIB if USE/WITH_LIBTOOL_ is
    used.

  * Properly document 'describe' target.

  * Properly remove directories at deinstallation time if ports sets
    a non-standard PREFIX.

  * Defaults INDEXFILE to INDEX-6 on 6-CURRENT.

20041119:
AUTHOR: portmgr@FreeBSD.org
  The following changes were committed:

  * Fix INDEX build if MAINTAINER is not defined.

  * Remove USE_QT2 option, since qt2 is obsolete.

  * Better define and explain ARCH option.

  * Add new script Tools/make_readmes, to speedup 'readmes'
    target. Avoid recursing into individual port directories and run
    it at top level, after the category README.html files have been
    created.

  * Fix 'search' target and enable a case-insensitive search on 5-x.

  * Extend 'search' target and enable search by categories.

  * Remove tk42 and tcl76 categories since they're obsolete.

  * Introduce DISTVERSION variable, that can be set instead of
    PORTVERSION and is automatically converted in a conforming PORTVERSION.

    Example:

    DISTVERSION=    10Alpha3

    extends 10Alpha3 to 10.a3

    DISTVERSION=    3Beta7-pre2

    extends 3Beta7-pre2 to 3.b7.p2

  * Use --suffix option instead of -b for patch(1), to make it
    compatible with BSD patch(1).

  * Fix {WANT,WITH}_MYSQL_VER behavior, to deal with conflicting
    versions.

20041116:
AUTHOR: gnome@FreeBSD.org
  The way OMF files are handled has been changed to use the new INSTALLS_OMF
  macro (similar to INSTALLS_SHLIB).  Details about the new macro can be found
  at http://www.FreeBSD.org/gnome/docs/porting.html and bsd.gnome.mk.

20041113:
AUTHOR: portmgr@FreeBSD.org
  Since INDEX version in CVS is always too old, portmgr decided to
  remove it.  You will still be able to build your own INDEX or use
  'fetchindex' target in /usr/ports/.

20041109:
AUTHOR: gnome@FreeBSD.org
  The way GConf schema files are handled has been changed to use the new
  GCONF_SCHEMAS macro (similar to MAN).  Details about the new macro can be
  found at http://www.FreeBSD.org/gnome/docs/porting.html and bsd.gnome.mk.

20040803:
AUTHOR: ade@FreeBSD.org
  As part of the ongoing autotools cleanup, devel/autoconf has been
  replaced with devel/autoconf253, and devel/automake with devel/automake15.
  Consumers of the various autotools knobs from bsd.autotools.mk should not
  notice any differences.  This update completes the transition of autotools
  to true versioned packages (cf: tcl/tk)

20040723:
AUTHOR: anholt@FreeBSD.org
  The XFREE86_VERSION variable is replaced by the X_WINDOW_SYSTEM variable.
  XFREE86_VERSION may no longer be used by ports Makefiles.  X_WINDOW_SYSTEM may
  currently be set to xorg, xfree86-4, and xfree86-3 (please use :L in checking
  it).  Several X_*_PORT variables are provided by bsd.port.mk which map to the
  appropriate port for the X_WINDOW_SYSTEM chosen.

20040719:
AUTHOR: ale@FreeBSD.org
  There has been a big update to PHP ports and bsd.php.mk to add more
  flexibility and new features.
  Now a port may depend on a specific set of PHP extensions.  To do so,
  simply replace:

  USE_PHP=  yes

  with:

  USE_PHP=  ext1 ext2 ext3 ...

  in the port Makefile. A list of all PHP extensions is included in bsd.php.mk.
  If the requirement is a build dependency too, the port should also define:

  USE_PHP_BUILD=yes

  Moreover, the new knob WANT_PHP_SCR has been added to indicate that the port
  requires the 'php' binary to run.
  Last but not least, many common operations to build/install/register a
  PHP extension can now be omitted from the port Makefile if it defines:

  USE_PHPEXT=   yes

  For more information on this point and on additional variables, see
  bsd.php.mk.

20040717:
AUTHOR: eik@FreeBSD.org
  OpenLDAP version 2.2 is now the default.
  When your port links against the openldap client libraries use
    USE_OPENLDAP=   yes
  and do not depend on a particular version. A user (or package
  building cluster) can select the desired flavour with
  WANT_OPENLDAP_VER and WANT_OPENLDAP_SASL, but these must not
  be used in ports Makefiles.

20040709:
AUTHOR: portmgr@FreeBSD.org
  USE_LIBTOOL_VER now configures a port to use the ports version of libtool
  instead of its included version.  This was put in place to reduce the
  number of ad hoc patches to individual ports' libtools to prevent .la
  file installation as well as fix various threading problems.

  To restore the previous libtool behavior, use the new macro,
  USE_INC_LIBTOOL_VER.  It works the exact same way as USE_LIBTOOL_VER
  in that it takes a libtool version as its argument.

  For example, to use the included version of libtool with extra hacks
  provided by libtool-1.5, add the following to your Makefile:

  USE_INC_LIBTOOL_VER=  15

  To use the ports version of libtool-1.5, add the following to
  your Makefile:

  USE_LIBTOOL_VER=  15

  Note: these macros are mutually exclusive.  Your port should only include
  one or the other if it needs to make use of libtool.

20040707:
AUTHOR: gnome@FreeBSD.org
  The way GConf schema files are installed has changed to support the upcoming
  GNOME 2.8 GConf.  Details about the change can be found at
  http://www.FreeBSD.org/gnome/docs/porting.html.  All existing ports have
  been converted to the new style, and portlint has been updated to flag
  old-style GConf schema installation.

20040610:
AUTHOR: portmgr@FreeBSD.org
  The following behavioral or feature changes were committed:

  * Support verbose index builds with INDEX_VERBOSE

  * Support glob expressions in USE_GETTEXT to allow more flexibility
    in the face of future gratuitous library version bumps by the gettext
    developers:

    USE_GETTEXT=yEs   # Works as before (case-insensitive)
    USE_GETTEXT=[5-7] # Accepts any of those libintl.so.x versions
                      # in the LIB_DEPENDS

  * Extend 'make search' support to allow much more flexible searching
    From the PR:

    Besides the good old key and name variables, this patch adds
    support for path, info, maint, cat, bdeps, and rdeps, which match
    on the appropriate fields, plus their exclusion counterparts: xkey,
    xname, etc.

    Examples:

    Find all ports whose names contain "pear-" but not "html" or "http":

      make search name=pear- xname='ht(tp|ml)'

    Find ports whose names contain "pear-" and which don't have apache
    listed in build-time dependencies:

      make search name=pear- xbdeps=apache

    The positive variables (name, key, maint, etc) are AND-ed, their
    negative versions are OR-ed; in other words, matching any x-
    variable will cause the port to be skipped, mismatch on any non-x-
    variable will cause it to be skipped.

    Examples:

    Find ports that are both in the www category and maintained by
    Thierry Thomas:

      make search maint=thierry@ path=/www/

    Find ports in the archivers category that are either not orphaned
    or don't have "zip" in their names (contrived):

      make search cat=archivers xmaint=ports@freebsd xname=zip

    It is possible to select fields to display.

    Example:

    Find PEAR ports that don't build-depend on apache, displaying only
    Port:, Path:, and Info: lines:

      make search name=pear- xbdeps=apache display=name,path,info

    Case-sensitivity can now be turned of with icase=1.

    Example:

    Find ports with @freebsd.org maintainer addresses without the
    "proper" capitalization (@FreeBSD.org), display their paths and
    maintainer addresses:

      make search maint=@freebsd\\.org icase=0 display=maint,path

    The key and xkey variables can be limited in scope to displayed fields
    by setting keylim to 1.

    Example:

    Find ports that contain "apache" in either of the name, path, info
    fields, ignore the rest of the record (dependencies, maintainer
    address, etc):

      make search key=apache display=name,path,info keylim=1

    The following variables can be set e.g. in /etc/make.conf to
    control default search behavior:

      PORTSEARCH_DISPLAY_FIELDS?=name,path,info,maint,index,bdeps,rdeps
      PORTSEARCH_KEYLIM?=0
      PORTSEARCH_XKEYLIM?=0
      PORTSEARCH_IGNORECASE?=1

  * Extend USE_PERL5_BUILD and USE_PERL5 to add EXTRACT and PATCH
    dependencies

  * While building index, treat non-existent dependencies as fatal.
    Previously the error was being hidden by the stderr
    redirection.

  * Don't always retry BROKEN ports when package building (it is taking
    too much time to continually rebuild ports that are usually going
    to really be broken).  Set TRYBROKEN if you want to attempt a
    build of a BROKEN port.

20040604:
AUTHOR: ade@FreeBSD.org
    Over the past few weeks, we have been testing the next
    incarnation of ports/Mk/bsd.autotools.mk on the road to bringing
    at least some semblance of sanity back to this corner of the
    ports collection.

    By far and away the easiest way to see the changes will be to
    view the new file once committed, but here is a summary of the
    changes:

    1. USE_LIBTOOL, USE_AUTOCONF, USE_AUTOHEADER, USE_AUTOMAKE have
    been fully deprecated.  Ports attempting to use these variables
    after the commit will error out, and most obviously break INDEX
    generation, with a helpful error message.  Instead, ports must
    now specifically choose the version of any of these tools that
    they need with the corresponding USE_*_VER variables.  Note that
    these variables understand any and all versions of autotools ports
    in the tree, there is no longer a need to have specific version
    numbers hardcoded in the infrastructure of bsd.autotools.mk
    (as there is now).  In particular, this will immediately open up
    automake18 and autoconf259 for general use and beating.

    2. Similarly for WANT_LIBTOOL, WANT_AUTOCONF, and WANT_AUTOMAKE.
    Again, these have been fully deprecated, and the equivalent
    WANT_*_VER versions should be used.

    In order to preserve existing behavior for these variables, please
    note the 20040314 entry in ports/CHANGES for the appropriate
    version numbers to use for any ports in the GNATS queue.

    Both WANT_* and USE_* bring in the relevant tool as a build
    dependency, and set up a reasonably large number of variables
    pointing to the right programs to be using in the port.  The
    only difference at the moment, is that USE_* will run an extra
    autotools-related configuration step, whereas WANT_* merely
    requests the environment.

    3. The helper knob USE_LIBLTDL has been added which currently
    simply adds a LIB dependency on the libltdl port.

    4. Three new variables have been introduced,
    WANT_{LIBTOOL,AUTOCONF,AUTOMAKE}_RUN=yes.  These variables will
    do nothing by themselves (a Work-In-Progress), but if the
    appropriate autotool version is defined (either through
    WANT_*_VER or USE_*_VER), this will add the relevant dependency
    to RUN_DEPENDS.

    Steps 3 and 4 now essentially negate the need for any kind of
    direct dependency within a non-autotools port Makefile on
    devel/autoconf*, devel/automake*, devel/libtool*, and devel/libltdl.

20040416:
AUTHOR: java@FreeBSD.org
    There has been a couple of bsd.java.mk tweaks and fixes.

    . Features from Stage 2 has been removed.  A port can no
      longer use the JDK dependency features by setting JAVA_HOME.
      Use JAVA_PREFERRED_PORT instead (see below).

    . The default JDK port now depends on OS version:
      java/diablo-jdk13 for 4.x, and java/jdk14 for 5.x

    . It is now possible for the user (and the porters) to
      define a list of preferred JDK ports to build and run ports.
      The port will use the first JDK port from the list that
      matches the requirements specified in the Makefile.
      JAVA_PREFERRED_PORT contains a list of suitable JDK ports
      (sorted by preference).  Names for JDKs may be found in
      bsd.java.mk, listed in ${_JAVA_PORTS_ALL} (e.g.
      "JAVA_PORT_NATIVE_BSDJAVA_1_4").

    . JAVA_PORT_VERSION is now set to the full version number
      of the chosen JDK (e.g. "1.4.2").  Porters will find hints
      regarding how to obtain the same behavior as before in the
      header of bsd.java.mk.

20040414:
AUTHOR: gnome@FreeBSD.org
    When writing a port that uses GTK+ 2.X, you can now list the dependency
    with "USE_GNOME=gtk20" which is preferable to LIB_DEPENDS because the
    GTK+ library version only needs to be changed in bsd.gnome.mk.

    Please see http://www.FreeBSD.org/gnome/docs/porting.html for all
    the available GNOME components as well as detailed instructions on
    creating ports that use the GNOME infrastructure.

20040404:
AUTHOR: gnome@FreeBSD.org
    The glib20 and gtk20 ports were updated to 2.4.0.  This new version
    is completely source and binary compatible with the previous 2.2.x
    series.  However, certain API calls have been deprecated.  If your
    port defines the following macros, they may refuse to build with
    the new versions of glib20 and gtk20:

GTK_DISABLE_DEPRECATED
GDK_DISABLE_DEPRECATED
G_DISABLE_DEPRECATED

    The temporary solution is to either patch your port's Makefiles to,
    or use an in-place regular expression to remove these macros.  The
    more permanent solution is to wait until the port's authors update
    their code to use current API calls.

20040402:
AUTHOR: java@FreeBSD.org
    There has been a big update to bsd.java.mk.  However, this update
    is mostly backwards compatible, so it shouldn't affect most java
    port maintainers.  There is some new functionality and minor
    changes worth documenting here though.

    bsd.java.mk now provides a new set of macros to be used by ports that
    require a JDK. When USE_JAVA is set, the following variables may be set
    in order to give to precision regarding the requirements of the port:

    . JAVA_VERSION
      A list of space-separated suitable java versions for the
      port. An optional "+" allows you to specify a range of versions.
      (allowed values: 1.1[+] 1.2[+] 1.3[+] 1.4[+])
      (NOTE: Used to be set by bsd.java.mk)
    . JAVA_OS
      A list of space-separated suitable JDK port operating systems
      for the port. (allowed values: native linux)
      (NOTE: Used to be set by bsd.java.mk)
    . JAVA_VENDOR
      A list of space-separated suitable JDK port vendors for
      the port. (allowed values: freebsd bsdjava sun ibm blackdown)
      (NOTE: Used to be set by bsd.java.mk)
    . JAVA_BUILD
      When set, it means that the selected JDK port should be
      added to build dependencies for the port.
    . JAVA_RUN
      This variable works exactly the same as JAVA_BUILD but
      regarding run dependencies.

    Here are some of the macros defined after setting USE_JAVA:

    . JAVA_PORT
      The name of the JDK port (e.g. java/jdk14)
    . JAVA_HOME
      The home of the JDK port in the local base
    . JAVA_PORT_VERSION
      The version of the JDK port.
      (NOTE: Used to be JAVA_VERSION, see above)
    . JAVA_PORT_OS
      The operating system used by the JDK port.
      (NOTE: Used to be JAVA_OS, see above)
    . JAVA_PORT_VENDOR
      The vendor of the JDK port.
      (NOTE: Used to be JAVA_VENDOR, see above)

    Plus many macros for the commonly used java executables:

        APPLETVIEWER, JAR, JAVA, JAVAC, JAVADOC, JAVAH,
        JAVAP, JAVA_KEYTOOL, JAVA_N2A, JAVA_POLICYTOOL,
        JAVA_SERIALVER, RMIC, RMID and RMIREGISTRY.

    bsd.java.mk 2.0 is mostly backward compatible with the previous
    version, save for the notes above and changed internal variables.
    Using the new features is strongly encouraged, since the old
    bsd.java.mk 1.0 features will be deprecated and may be removed in
    the future.

    You will find more detailed info (as well as a quick tutorial) at:
    http://www.esil.univ-mrs.fr/~hquiroz/freebsd/bsd.java.mk-2.0.html

20040316:
AUTHOR: gnome@FreeBSD.org
    The print/freetype2 port has been updated to 2.1.7.  This update
    changes some of the internal FreeType API.  Applications may need
    to be patched to support this new API.  If a source files includes
    freetype/freetype.h, make sure ft2build.h is included before
    freetype/freetype.h.  The proper way to do this is:

#include <ft2build.h>
#include FT_FREETYPE_H

    However, the following will work as well, but is deprecated:

#include <ft2build.h>
#include <freetype/freetype.h>

20040314:
AUTHOR: ade@FreeBSD.org
    USE_LIBTOOL, USE_AUTOCONF, and USE_AUTOMAKE are now considered
    deprecated, and will be removed on or around June 1st 2004.
    All ports should now choose the specific version of the tool,
    using USE_LIBTOOL_VER, USE_AUTOCONF_VER, and USE_AUTOMAKE_VER.
    The old "system default" behavior can be written as follows:

    Old         New
    USE_LIBTOOL=yes     USE_LIBTOOL_VER=13
    USE_AUTOCONF=yes    USE_AUTOCONF_VER=213
    USE_AUTOMAKE=yes    USE_AUTOMAKE_VER=14

20040304:
AUTHOR: eik@FreeBSD.org
    New variable MASTER_SITE_SOURCEFORGE_EXTENDED. It has the
    ten official sourceforge.net download mirrors, whereas
    MASTER_SITE_SOURCEFORGE only has five. To check if your
    port is mirrored there, go to
    <http://prdownloads.sourceforge.net/${MASTER_SITE_SUBDIR}/>
    click on ${DISTFILES} and you'll see five or ten mirrors,
    corresponding to the variables above.

20040226:
AUTHOR: knu@FreeBSD.org
    The default version of Ruby is now 1.8 on all platforms
    including the i386.

    Users on the i386 platform need to follow the instructions
    described in the UPDATING file to cope with this upgrade.

    Next time ruby is major upgraded, you won't need to do this
    kind of messy work because some subtle changes have been made
    to the ruby port infrastructure to make it easier to handle
    multiple versions of ruby.

20040217:
AUTHOR: gnome@FreeBSD.org
    Mozilla will now default to using GTK2, and will only compile
    against Gtk+-1.2 if explicitly requested.  This is in exact
    opposite to the old behavior.

    The valid values of WITH_MOZILLA are now:
        mozilla         (www/mozilla, GTK2)
        mozilla-devel       (www/mozilla-devel, GTK2)
        mozilla-gtk1        (www/mozilla-gtk1, GTK1)
        mozilla-devel-gtk1  (www/mozilla-devel-gtk1, GTK1)

    As before, WITH_MOZILLA can be set in /etc/make.conf, but doing
    so is not advised unless you desire the development versions.
    GTK2 browsers will automatically compile against GTK2 mozilla,
    and GTK1 browsers (galeon1, galeon1, and galeon1) will
    automatically compile against GTK1.

    Again, the only people who will need to take action are those
    who desire development versions (which are inactive at this time
    anyway).  Those who want GTK1 mozilla-devel must set
    WITH_MOZILLA=mozilla-devel-gtk1 or they will be pleasantly
    surprised with their very own GTK2 installation on the next
    update.

    WITH_MOZILLA=mozilla-gtk2 and WITH_MOZILLA=mozilla-devel-gtk2
    are still honored for the time being, but their use is
    now deprecated.  Any new ports are not required to consider
    their values, and so eventually WITH_MOZILLA _will_ have to
    be changed.

    Hopefully galeon2 can catch up to peoples' expectations from
    galeon1 soon, and we can remove the GTK1 ports altogether.


20040204:
AUTHOR: portmgr@FreeBSD.org
    The bsd.php.mk file has been moved out of the lang/php4 port
    into the Mk directory.  This will make it much easier to include
    PHP support in PHP-dependent ports.  Instead of including
    bsd.php.mk directly, a port can simply set USE_PHP=yes, and the
    ports system with Do the Right Thing.

    All trailing whitespace has been removed from bsd.port.mk.

    Enhance the new OPTIONS code by only including saved options if
    the port defines OPTIONS, attempt to use LATEST_LINK as the
    unique name for a port (fall back to ${PKGNAMEPREFIX}${PORTNAME}
    otherwise), bring the ===> messages in line with the existing
    ones by using PKGNAME instead of PORTNAME, use PKGNAME in the
    dialog, use ECHO_CMD instead of ECHO_MSG to write the
    OPTIONSFILE, display a message during compilation indicating
    that user-specified options have been found, and make the output
    of the showconfig target a little more user-friendly.

    A new USE_ICONV macro has been added that takes the place of an
    explicit LIB_DEPENDS on converters/libiconv.  This will help
    with future shared lib version bumps.

    A new USE_GETTEXT macro has been added that takes the place of
    an explicit LIB_DEPENDS on devel/gettext.  This will help with
    future shared lib version bumps.

    Module::Build is a system for building, testing, and installing
    Perl modules.  It will eventually replace the obsoleted
    ExtUtils::MakeMaker.  Many new Perl modules have already
    switched to using Build.PL instead of Makefile.PL.  To
    facilitate building those modules, a new PERL_MODBUILD macro has
    been added.  Use that in place of PERL_CONFIGURE when porting
    Perl modules that make use of the Module::Build framework.

    Certain ports want to check for the availability of SDL
    libraries before including them.  This change adds a new
    WANT_SDL macro similar to WANT_GNOME.  By setting this, the
    porter indicates that her port can optional use SDL if present
    on the system.  WANT_SDL should be defined _before_
    bsd.port.pre.mk is included.  After including bsd.port.pre.mk,
    the list of available SDL components will be returned in the
    HAVE_SDL macro.  For details on how to process this component
    list, refer to bsd.sdl.mk.

    The OpenBSD and NetBSD projects diverged from the FreeBSD ports
    tree years ago, and it no longer make sense to include obsolete
    references to incorrect paths in the FreeBSD ports system.  This
    change removes the NetBSD and OpenBSD PORTSDIR compatibility
    bits from bsd.port.mk.

    The comment for PKGDIR read, ``A direction containing any
    package creating file.''  The word ``direction'' should be
    ``directory.''  This has been fixed.

    A new DIRNAME macro has been added that points to
    /usr/bin/dirname.  All direct use of dirname in ports can be
    switched to this macro.

    Direct use of commands dirname, id, and rm have been corrected
    to use their macro equivalents instead.  Some useless ${HEAD}
    -n 1 statements have been removed.  A strange comment in the
    do-install target and an out of place ``fi'' have been fixed as
    well.

    On 5-CURRENT after the 5.2-RELEASE split, the default Perl
    version has been updated from 5.6.1 to 5.8.2.  As well, some
    Perl definitions in bsd.port.mk have been moved to their correct
    locations which corrects the PERL_LEVEL definition.

    The following optimizations have been added to the ports system
    to speed up recursive operations such as make describe, make
    index, make ignorelist, etc.  bsd.gnome.mk is now only included
    if a port defines USE_GNOME, WANT_GNOME, and/or USE_GTK.  More
    variables are cached and passed down through bsd.port.subdir.mk.
    Perl is no longer invoked when a simple ``echo'' will do.  More
    subshell variable assignments have been hidden behind
    conditionals so that the commands are not spawned every time.
    Finally, dependency lists are only constructed if ports actually
    declare dependencies.  These optimizations give make index
    approximately a 43% speedup.

    If CPUFLAGS is not defined (this _CPUCFLAGS is empty), trying
    to remove _CPUCFLAGS from CFLAGS will result in an error.  This
    change fixes that.

    On recent versions of 5.X, /etc/rc.subr exists, and there is no
    reason to install another copy in ${LOCALBASE}/etc.  The reason
    this was ever done was to workaround some build issues on bento.
    However, testing OSVERSION seems to work in spite of those build
    issues.

    The ports system now supports MySQL 3.23, 4.0, 4.1, and 5.0.
    Also, the ability to scale to newer versions was also but in
    place.

    An .endif comment indicated that the .if block checked
    WANT_MYSQL when, in fact, it was checking WANT_MYSQL_VER.  This
    has been corrected.

    The PTHREAD{CFLAGS,LIBS} macros have been made overridable on
    all versions of FreeBSD to allow for alternate threading
    implementations (e.g. -lc_r, -lthr, -mt, etc.).  The default
    threading library has been changed to -lpthread from -lc_r on
    -CURRENT.

    The new SIZE support broke distfiles fetching on FreeBSD < 4.8.
    On those versions of FreeBSD, the SIZE distfile attribute is now
    ignored.  Also, defining DISABLE_SIZE in, for example,
    /etc/make.conf, will ignore the SIZE attribute on all versions
    of FreeBSD.  This is useful with alternate values for FETCH_CMD.

    A new vulnerabilities database has been added to the ports
    system in order to keep more accurate, up-to-date, track of
    security vulnerabilities.  The ports system now knows how to
    query that database and dynamically prevents the installation
    of vulnerable ports.

    In order to allow for more rapid development of the package
    tools, the ports system will prefer to use pkg_* tools found in
    ${LOCALBASE} over those in the base system.  However, all PKG_*
    macros are still overridable.

    A new physical category, net-mgmt, has been created to house
    network management ports.

    The /var/db/port.mkversion file never really took off, and is
    now very obsolete.  Replace the code used to generate and check
    this file with a simple OSVERSION check.  The ports system now
    requires FreeBSD 4.3 or higher.

    The last round of bsd.*.mk changes broke ports that had
    duplicate distinfo entries (e.g. linux_base).  This is now
    fixed.  Along with this fix, only distfiles with a bad checksum
    will be refetched, where as distfiles missing from distinfo will
    not be refetched.

    The PLIST_{DIRS,FILES} macros were passed to the final package
    list unchanged by PLIST_SUB.  This is not always desirable.
    Now, those macros are passed through PLIST_SUB.

    The previous OPTIONS code assumed users would be running port
    build as root.  If this was not the case, OPTIONS configuration
    would fail.  Now, the bits of the config and rmconfig targets
    that require write access to system directories are run under
    SU_CMD.

    The makesum target will now add a SIZE attribute for each
    distfile by default.  This can be overridden by defining NO_SIZE
    in a port's Makefile.  Note: this could probably be expanded to
    omit SIZE attributes for specific distfiles in the future.

20040129:
AUTHOR: trevor@FreeBSD.org
    SIZE lines in distinfo files:  if you set USE_SIZE when you do "make
    makesum", the byte sizes of the distfiles will be listed in the
    distinfo file. Then, if a distfile is replaced on its master site with
    one of a different size than that listed, "make fetch" will fail with a
    "size mismatch" error before downloading the file and the user will be
    asked to fetch the file by hand. Also, a user will know the size of
    the distfiles before fetching and decide to fetch later.

20040129:
AUTHOR: erwin@FreeBSD.org
    Start of CHANGES file.

FORMAT:

This file contains a list, in reverse chronological order, of major
breakages or added features in tracking ports.  Not all things will be
listed here, and it only starts on January 29, 2004.

Copyright information:

Copyright 2004 FreeBSD Foundation All Rights Reserved.

Redistribution, publication, translation and use, with or without
modification, in full or in part, in any form or format of this
document are permitted without further permission from the author.

THIS DOCUMENT IS PROVIDED BY FREEBSD FOUNDATION ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED.  IN NO EVENT SHALL WARNER LOSH BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

If you find this document useful, and you want to, you may buy the
author a beer.

Contact Erwin Lansing if you have any questions about your use of
this document.

$FreeBSD$