path: root/Mk/Uses/perl5.mk

# $FreeBSD$
#
# Provide support to use perl5
#
# PERL5     - Set to full path of perl5, either in the system or
#         installed from a port.
# PERL      - Set to full path of perl5, either in the system or
#         installed from a port, but without the version number.
#         Use this if you need to replace "#!" lines in scripts.
# PERL_VERSION  - Full version of perl5 (see below for current value).
#
# PERL_VER  - Short version of perl5 (major.minor without patchlevel)
#
# PERL_LEVEL    - Perl version as an integer of the form MNNNPP, where
#         M is major version, N is minor version, and P is
#         the patch level. E.g., PERL_VERSION=5.14.4 would give
#         a PERL_LEVEL of 501404. This can be used in comparisons
#         to determine if the version of perl is high enough,
#         whether a particular dependency is needed, etc.
# PERL_ARCH - Directory name of architecture dependent libraries
#         (value: mach).
# PERL_PORT - Name of the perl port that is installed
#         (for example: perl5.18)
# SITE_PERL - Directory name where site specific perl packages go.
#         This value is added to PLIST_SUB.
# SITE_ARCH - Directory name where arch site specific perl packages go.
#         This value is added to PLIST_SUB.
# USE_PERL5 - If set, this port uses perl5 in one or more of the extract,
#         patch, build, install or run phases.
#         It can also have configure, modbuild and modbuildtiny when
#         the port needs to run Makefile.PL, Build.PL and a
#         Module::Build::Tiny flavor of Build.PL.
#
# MAINTAINER: perl@FreeBSD.org

.if !defined(_INCLUDE_USES_PERL5_MK)
_INCLUDE_USES_PERL5_MK= yes

.if !empty(perl5_ARGS)
IGNORE= Incorrect 'USES+=perl5:${perl5_ARGS}' perl5 takes no arguments
.endif

USE_PERL5?= run build

# remove when 5.20 goes away.
.sinclude "${LOCALBASE}/etc/perl5_version"
.if defined(PERL_VERSION)
PERL5_DEPEND=   ${PERL5}
THIS_IS_OLD_PERL=   yes
.else
# end of remove
.include "${PORTSDIR}/Mk/bsd.default-versions.mk"
.if ${PERL5_DEFAULT} == 5.18
.include "${PORTSDIR}/lang/perl5.18/version.mk"
.elif ${PERL5_DEFAULT} == 5.20
.include "${PORTSDIR}/lang/perl5.20/version.mk"
.elif ${PERL5_DEFAULT} == 5.22
.include "${PORTSDIR}/lang/perl5.22/version.mk"
.elif ${PERL5_DEFAULT} == devel
.include "${PORTSDIR}/lang/perl5-devel/version.mk"
# Force PERL_PORT here in case two identical PERL_VERSION.
PERL_PORT?= perl5-devel
.else
IGNORE= Invalid perl5 version ${PERL5_DEFAULT}
.endif
.endif

PERL_VER?=  ${PERL_VERSION:C/\.[0-9]+$//}

.if !defined(PERL_LEVEL) && defined(PERL_VERSION)
perl_major= ${PERL_VERSION:C|^([1-9]+).*|\1|}
_perl_minor=    00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
perl_minor= ${_perl_minor:C|^.*(...)|\1|}
.if ${perl_minor} >= 100
perl_minor= ${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
perl_patch= ${PERL_VERSION:C|^.*(..)|\1|}
.else # ${perl_minor} < 100
_perl_patch=    0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
perl_patch= ${_perl_patch:C|^.*(..)|\1|}
.endif # ${perl_minor} < 100
PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch}
.else
PERL_LEVEL=0
.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)

PERL_ARCH?= mach

# there must always be a default to prevent dependency failures such
# as "ports/lang: not found".  Also, perl5-devel is taken care in the
# perl5_default file, or up there in the default versions selection.
.if   ${PERL_LEVEL} >= 502200
PERL_PORT?= perl5.22
.elif   ${PERL_LEVEL} >= 502000
PERL_PORT?= perl5.20
.else # ${PERL_LEVEL} < 502000
PERL_PORT?= perl5.18
.endif

SITE_PERL_REL?= lib/perl5/site_perl
SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL}
SITE_ARCH_REL?= ${SITE_PERL_REL}/${PERL_ARCH}/${PERL_VER}
SITE_ARCH?= ${LOCALBASE}/${SITE_ARCH_REL}
SITE_MAN3_REL?= ${SITE_PERL_REL}/man/man3
SITE_MAN3?= ${PREFIX}/${SITE_MAN3_REL}
.if defined(THIS_IS_OLD_PERL)
SITE_MAN1_REL?= share/man/man1
.else
SITE_MAN1_REL?= ${SITE_PERL_REL}/man/man1
.endif
SITE_MAN1?= ${PREFIX}/${SITE_MAN1_REL}

PERL5=      ${LOCALBASE}/bin/perl${PERL_VERSION}
PERL=       ${LOCALBASE}/bin/perl
CONFIGURE_ENV+= ac_cv_path_PERL=${PERL} ac_cv_path_PERL_PATH=${PERL}

QA_ENV+=    SITE_ARCH_REL=${SITE_ARCH_REL} LIBPERL=libperl.so.${PERL_VER}

# Define the want perl first if defined
.if ${USE_PERL5:M5*}
want_perl_sign=     ${USE_PERL5:M5*:C|^[0-9.]+||}
want_perl_ver=      ${USE_PERL5:M5*:S|${want_perl_sign}$||}
want_perl_major=    ${want_perl_ver:C|\..*||}
_want_perl_minor=   ${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||}
_want_perl_patch=   ${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||}
want_perl_minor=    ${_want_perl_minor:S|^|000|:C|.*(...)|\1|}
want_perl_patch=    ${_want_perl_patch:S|^|00|:C|.*(..)|\1|}
USE_PERL5_LEVEL=    ${want_perl_major}${want_perl_minor}${want_perl_patch}
.endif

# All but version
_USE_PERL5= ${USE_PERL5:N5*}

# Mask unspecified components. E.g. this way "5" will match any "5.x.x".
.if empty(_want_perl_minor)
masked_PERL_LEVEL=  ${PERL_LEVEL:C|(.....)$|00000|}
.elif empty(_want_perl_patch)
masked_PERL_LEVEL=  ${PERL_LEVEL:C|(..)$|00|}
.else
masked_PERL_LEVEL=  ${PERL_LEVEL}
.endif

.if defined(want_perl_sign)
.if ${want_perl_sign} == "+"
.if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
USE_PERL5_REASON?=  requires Perl ${want_perl_ver} or later, install lang/perl${want_perl_major}.${want_perl_minor:C|^0||} and try again
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
.elif ${want_perl_sign} == ""
.if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
USE_PERL5_REASON?=  requires Perl ${want_perl_ver} exactly
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
.elif ${want_perl_sign} == "-"
.if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
USE_PERL5_REASON?=  requires a Perl version earlier than ${want_perl_ver}
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
.else # wrong suffix
IGNORE= improper use of USE_PERL5
.endif
.endif

_USES_POST+=    perl5
.endif

.if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PERL5_POST_MK)
_INCLUDE_USES_PERL5_POST_MK=    yes

PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
        PERL_VER=${PERL_VER} \
        PERL5_MAN1=${SITE_MAN1_REL} \
        PERL5_MAN3=${SITE_MAN3_REL} \
        SITE_PERL=${SITE_PERL_REL} \
        SITE_ARCH=${SITE_ARCH_REL}

# handle perl5 specific manpages
.for sect in 3
.if defined(P5MAN${sect})
_MANPAGES+= ${P5MAN${sect}:S%^%${PREFIX}/lib/perl5/${PERL_VER}/man/man${sect}/%}
.endif
.endfor
MANDIRS+=   ${PREFIX}/${SITE_PERL_REL}/man

.if ${_USE_PERL5:Mmodbuild} || ${_USE_PERL5:Mmodbuildtiny}
_USE_PERL5+=    configure
ALL_TARGET?=    # empty
CONFIGURE_ARGS+=--install_path lib="${PREFIX}/${SITE_PERL_REL}" \
        --install_path arch="${PREFIX}/${SITE_ARCH_REL}" \
        --install_path script="${PREFIX}/bin" \
        --install_path bin="${PREFIX}/bin" \
        --install_path libdoc="${MAN3PREFIX}/man/man3" \
        --install_path bindoc="${MAN1PREFIX}/man/man1"
CONFIGURE_SCRIPT?=  Build.PL
PL_BUILD?=  Build
CONFIGURE_ARGS+=--destdir ${STAGEDIR}
DESTDIRNAME=    --destdir
.if ${_USE_PERL5:Mmodbuild}
.if ${PORTNAME} != Module-Build
BUILD_DEPENDS+= p5-Module-Build>=0.4206:${PORTSDIR}/devel/p5-Module-Build
.endif
CONFIGURE_ARGS+=--create_packlist 1
.endif
.if ${_USE_PERL5:Mmodbuildtiny}
.if ${PORTNAME} != Module-Build-Tiny
BUILD_DEPENDS+= p5-Module-Build-Tiny>=0.039:${PORTSDIR}/devel/p5-Module-Build-Tiny
.endif
CONFIGURE_ARGS+=--create_packlist 1
.endif
.elif ${_USE_PERL5:Mconfigure}
CONFIGURE_ARGS+=INSTALLDIRS="site"
.endif # modbuild

.if ${_USE_PERL5:Mconfigure}
_USE_PERL5+=    build run
# Disable AutoInstall from attempting to install from CPAN directly in
# the case of missing dependencies.  This causes the build to loop on
# the build cluster asking for interactive input.
CONFIGURE_ENV+= PERL_EXTUTILS_AUTOINSTALL="--skipdeps"
.if defined(BATCH) && !defined(IS_INTERACTIVE)
CONFIGURE_ENV+= PERL_MM_USE_DEFAULT="YES"
.endif # defined(BATCH) && !defined(IS_INTERACTIVE)
.endif # configure

.if ${_USE_PERL5:Mextract}
EXTRACT_DEPENDS+=   ${PERL5_DEPEND}:${PORTSDIR}/lang/${PERL_PORT}
.endif

.if ${_USE_PERL5:Mpatch}
PATCH_DEPENDS+=     ${PERL5_DEPEND}:${PORTSDIR}/lang/${PERL_PORT}
.endif

.if ${_USE_PERL5:Mbuild}
BUILD_DEPENDS+=     ${PERL5_DEPEND}:${PORTSDIR}/lang/${PERL_PORT}
.endif

.if ${_USE_PERL5:Mrun}
RUN_DEPENDS+=       ${PERL5_DEPEND}:${PORTSDIR}/lang/${PERL_PORT}
.endif

.if ${_USE_PERL5:Mconfigure}
CONFIGURE_ARGS+=    CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \
            INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
CONFIGURE_SCRIPT?=  Makefile.PL
MAN3PREFIX?=        ${PREFIX}/${SITE_PERL_REL}
.if !defined(THIS_IS_OLD_PERL)
MAN1PREFIX?=        ${PREFIX}/${SITE_PERL_REL}
.endif
.undef HAS_CONFIGURE

.if !target(do-configure)
do-configure:
    @if [ -f ${SCRIPTDIR}/configure ]; then \
        cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
        ${SCRIPTDIR}/configure; \
    fi
    @cd ${CONFIGURE_WRKSRC} && \
        ${SETENV} ${CONFIGURE_ENV} \
        ${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
.if !${_USE_PERL5:Mmodbuild*}
    @cd ${CONFIGURE_WRKSRC} && \
        ${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
.endif # ! modbuild
.endif # !target(do-configure)
.endif # configure

.if ${_USE_PERL5:Mmodbuild*}
.if !target(do-build)
do-build:
    @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${ALL_TARGET} ${MAKE_ARGS})
.endif # !target(do-build)

.if !${USES:Mgmake}
.if !target(do-install)
do-install:
    @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${INSTALL_TARGET} ${MAKE_ARGS})
.endif # !target(do-install)
.endif # ! USES=gmake
.endif # modbuild

PACKLIST_DIR?=  ${PREFIX}/${SITE_ARCH_REL}/auto

# In all those, don't use - before the command so that the user does
# not wonder what has been ignored by this message "*** Error code 1 (ignored)"
_USES_install+= 560:fix-perl-things
fix-perl-things:
# Remove STAGEDIR from .packlist and add the file to the plist.
    @(if [ -d ${STAGEDIR}${PACKLIST_DIR} ] ; then \
        ${FIND} ${STAGEDIR}${PACKLIST_DIR} -name .packlist | while read f ; do \
            ${SED} -i '' 's|^${STAGEDIR}||' "$$f"; \
            ${ECHO} $$f | ${SED} -e 's|^${STAGEDIR}||' >> ${TMPPLIST}; \
        done \
    fi) || :

# Starting with perl 5.20, the empty bootstrap files are not installed any more
# by ExtUtils::MakeMaker.  As we don't need them anyway, remove them.
# Module::Build continues to install them, so remove the files unconditionally.
    @${FIND} ${STAGEDIR} -name '*.bs' -size 0 -delete || :

# Some ports use their own way of building perl modules and generate
# perllocal.pod, remove it here so that those ports don't include it
# by mistake in their plists.  It is sometime compressed, so use a
# shell glob for the removal.  Also, remove the directories that
# contain it to not leave orphans directories around.
    @${RM} -f ${STAGEDIR}${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH}/perllocal.pod* || :
    @${RMDIR} -p ${STAGEDIR}${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH} 2>/dev/null || :

.if !target(do-test) && (!empty(USE_PERL5:Mmodbuild*) || !empty(USE_PERL5:Mconfigure))
TEST_TARGET?=   test
TEST_WRKSRC?=   ${BUILD_WRKSRC}
do-test:
.if ${USE_PERL5:Mmodbuild*}
    cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${PERL5} ${PL_BUILD} ${TEST_TARGET} ${TEST_ARGS}
.elif ${USE_PERL5:Mconfigure}
    cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${MAKE_CMD} ${TEST_ARGS} ${TEST_TARGET}
.endif # USE_PERL5:Mmodbuild*
.endif # do-test
.endif # defined(_POSTMKINCLUDED)