path: root/Mk/bsd.gecko.mk

#-*- mode: Fundamental; tab-width: 4; -*-
# ex:ts=4
#
# Date created:     12 Nov 2005
# Whom:         Michael Johnson <ahze@FreeBSD.org>
#
# $FreeBSD$
#
# 4 column tabs prevent hair loss and tooth decay!

# ======================= USERS =================================
# To specify which gecko-based backend you prefer, use something like:
#
# WITH_GECKO=   firefox
#
# The valid backends are:
# firefox flock seamonkey thunderbird
#
# See below for more details.
# ======================= /USERS ================================

# bsd.gecko.mk abstracts the selection of gecko-based backends. It allows users
# and porters to support any available gecko backend without needing to build
# many conditional tests. ${USE_GECKO} is the list of backends that your port
# can handle, and ${GECKO} is set by bsd.gecko.mk to be the chosen backend.
# Users set ${WITH_GECKO} to the list of gecko backends they want on their
# system.

.if defined(USE_GECKO) && ${USE_GECKO}!="gecko"

.if !defined(Gecko_Pre_Include)
# Please make sure all changes to this file are passed through the maintainer.
# Do not commit them yourself (unless of course you're the Port's Wraith ;).
Gecko_Include_MAINTAINER=       gecko@FreeBSD.org
Gecko_Pre_Include=          bsd.gecko.mk

# Users should use the following syntax:
#
# WITH_GECKO= mozilla firefox seamonkey
#  Use mozilla whenever a port supports it, falling back on firefox and
#  then seamonkey.
# WITH_GECKO= firefox
#  Sets your preferred backend. With this example, firefox will always
#  be chosen, unless the port doesn't support a firefox backend. In that
#  case, you get whatever the porter chose as the default. Better to use
#  the first example.
#
#
# Ports should use the following:
#
# USE_GECKO= mozilla firefox seamonkey
#  The list of gecko backends that the port supports. Unless the user
#  overrides it with WITH_GECKO, the first gecko listed in USE_GECKO
#  will be the default. In the above example, www/mozilla will be used
#  as a gecko backend unless WITH_GECKO=firefox or WITH_GECKO=seamonkey
#  is defined by the user.
#
# USE_GECKO= firefox-devel<->firefox
#  This will sed -e 's/firefox/firefox-devel/' on Makefile.in's and configure 
#  if ${GECKO}=="firefox-devel"
#
#  Example:
#  USE_GECKO= mozilla firefox seamonkey
#  
#  post-patch:
#   @${REINPALCE_CMD} -e 's|mozilla-|${GECKO}-|' \
#       ${MOZSRC}/configure
#
#  If you want your port to check the ${GECKO} variable to see which backend
#  has been chosen.
#
#  Example:
#  USE_GECKO= mozilla firefox seamonkey
#  
#  post-patch:
#  .if ${GECKO}=="seamonkey"
#   @${REINPLACE_CMD} -e 's|mozilla-|seamonkey-|' \
#       ${MOZSRC}/configure
#  .endif

_GECKO_ALL= firefox seamonkey thunderbird flock mozilla \
        libxul

thunderbird_PORTSDIR=   mail
libxul_PLIST=       ${LOCALBASE}/lib/libxul/libxul.so

.for gecko in ${_GECKO_ALL}
${gecko}_PORTSDIR?= www
${gecko}_DEPENDS?=  ${PORTSDIR}/${${gecko}_PORTSDIR}/${gecko}
${gecko}_PLIST?=    ${LOCALBASE}/lib/${gecko}/libgtkembedmoz.so
.endfor

# Figure out which mozilla to use
# Weed out bad options in USE_GECKO
.for badgecko in ${USE_GECKO}
. if ${_GECKO_ALL:M${badgecko:C/^([^<->]+).*/\1/}}!=""
GOOD_USE_GECKO+=    ${badgecko:C/^([^<->]+).*/\1/}
. endif
. if ${_GECKO_ALL:M${badgecko:C/^[^<->]+<->([^<->]+).*/\1/}}!="${badgecko:C/^([^<->]+).*/\1/}"
${badgecko:C/^([^<->]+).*/\1/}_HACK=    s:${badgecko:C/^[^<->]+<->([^<->]+).*/\1/}:${badgecko:C/^([^<->]+).*/\1/}:g
. endif
.endfor

.undef GECKO_FALLTHROUGH
.undef _FOUND_WITH_GECKO
# Figure out which gecko to use and weed out the bad ones
.if defined(WITH_GECKO) && defined(GOOD_USE_GECKO)
. for badgecko in ${WITH_GECKO}
.  if ${GOOD_USE_GECKO:M${badgecko}}!=""
GOOD_WITH_GECKO+=   ${badgecko}
.  endif
. endfor
. if defined(GOOD_WITH_GECKO)
.  for gecko in ${GOOD_WITH_GECKO}
.   if !defined(GECKO_FALLTHROUGH)
GECKO=  ${gecko}
GECKO_FALLTHROUGH=  ${TRUE}
_FOUND_WITH_GECKO=  ${TRUE}
.   endif
.  endfor
. endif
.endif

.if !defined(GECKO) && defined(GOOD_USE_GECKO)
. for gecko in ${GOOD_USE_GECKO}
.  if !defined(GECKO_FALLTRHOUGH)
GECKO=  ${gecko}
GECKO_FALLTRHOUGH=  ${TRUE}
.  endif
. endfor
.endif

# Generic defines
GECKO_CONFIG?=          ${LOCALBASE}/bin/${GECKO}-config
XPIDL?=             ${LOCALBASE}/lib/${GECKO}/xpidl
XPIDL_INCL?=            `${GECKO_CONFIG} --idlflags`

.if defined(GECKO) && ${_GECKO_ALL:M${GECKO}}!=""
BUILD_DEPENDS+= ${${GECKO}_PLIST}:${${GECKO}_DEPENDS}
RUN_DEPENDS+=   ${${GECKO}_PLIST}:${${GECKO}_DEPENDS}
.else
IGNORE= Unable to find a supported gecko, please check USE_GECKO
.endif

pre-everything:: _gecko-pre-everything

_gecko-pre-everything::
    @${ECHO_CMD} ""
.if !defined(_FOUND_WITH_GECKO) && defined(WITH_GECKO)
    @${ECHO_CMD} " Warning: ${PORTNAME} does not support any gecko you"
    @${ECHO_CMD} " listed in WITH_GECKO=${WITH_GECKO}."
    @${ECHO_CMD} " \"${GECKO}\" will be used"
    @${ECHO_CMD} ""
    @${ECHO_CMD} " for gecko support, but you can change that by using one of"
    @${ECHO_CMD} " the following values:"
.else
    @${ECHO_CMD} " ${PORTNAME} is using ${GECKO} for gecko support, but you can"
    @${ECHO_CMD} " change that by defining WITH_GECKO to the following values:"
.endif
    @${ECHO_CMD} ""
.for gecko in ${GOOD_USE_GECKO}
    @${ECHO_CMD} "   ${gecko} "
.endfor
    @${ECHO_CMD} ""

post-patch: gecko-post-patch

gecko-post-patch:
.if defined(${GECKO}_HACK)
    ${FIND} ${WRKSRC} -name "Makefile.in" -type f -o -name "configure" -type f | \
        ${XARGS} ${REINPLACE_CMD} -e ${${GECKO}_HACK}
.endif
.endif

.else # split

.if !defined(_POSTMKINCLUDED) && !defined(Gecko_Pre_Include)
Gecko_Pre_Include=  bsd.gecko.mk

# This file contains some reusable components for mozilla ports. It's of
# use primarily to apps from the mozilla project itself (such as Firefox,
# Thunderbird, etc.), and probably won't be of use for gecko-based ports
# like epiphany, galeon, etc.
#
# You need to make sure to add USE_GECKO=gecko to for your port can uses
# one of these options below.
#
# Ports can use the following:
#
# USE_MOZILLA           By default, it enables the denendencies: cairo, dbm,
#                       jpeg, nspr, nss, png, xft and zip. Search for
#                       '_ALL_DEPENDS' below to see the list. If your port
#                       doesn't need one of list then you can use '-' like
#                       'USE_MOZILLA= -png -zip' to subtract the dependencies.
#
# GECKO_PLIST_PRE_FILES Manual add files in the plist if it needs.
#
# GECKO_PLIST_PRE_DIRS  Manual directories in the plist if it needs.
#
# MOZILLA_PLIST_DIRS    List of directories to descend into when installing
#                       and creating the plist
#
# MOZ_PIS_SCRIPTS       List of scripts residing in ${FILESDIR} to be
#                       filtered through MOZCONFIG_SED and installed along
#                       with our Pluggable Init Scripts (PIS)
#
# MOZ_SED_ARGS          sed(1) commands through which MOZ_PIS_SCRIPTS are
#                       filtered. There is a default set defined here, so
#                       you probably want to add to MOZ_SED_ARGS rather
#                       than clobber it
#
# MOZ_OPTIONS           configure arguments (added to .mozconfig). If
#                       NOMOZCONFIG is defined, you probably want to set
#                       CONFIGURE_ARGS+=${MOZ_OPTIONS}
#
# MOZ_MK_OPTIONS        The make(1) arguments (added to .mozconfig). If
#                       NOMOZCONFIG is defined, you probably want to set
#                       MAKE_ARGS+=${MOZ_MK_OPTIONS}
#
# MOZ_EXPORT            Environment variables for the build process (added
#                       to .mozconfig). If NOMOZCONFIG is defined, you
#                       probably want to set MAKE_ENV+=${MOZ_EXPORT}
#
# MOZ_TOOLKIT           A variable for the --enable-default-toolkit= in
#                       CONFIGURE_ARGS. The default is gtk2.
#
# MOZ_EXTENSIONS        A list of extensions to build
#
# MOZ_GRAPHICS          A list of image decoders to build
#
# MOZ_PROTOCOLS         A list of protocols to build (http, ftp, etc.)
#
# PORT_MOZCONFIG        Defaults to ${FILESDIR}/mozconfig.in, but can be
#                       set to a generic mozconfig included with the port
#
# NOGECKO_INSTALL       Don't install the built gecko (most likely for
#                       testing)
#
# NOGECKO_PLIST         Don't create a dynamically-generated playlist
#
# NOMOZCONFIG           Don't drop a customized .mozconfig into the build
#                       directory. Options will have to be specified in
#                       CONFIGURE_ARGS instead
#

MAINTAINER?=    gecko@FreeBSD.org

MOZILLA?=   ${PORTNAME}
MOZILLA_VER?=   ${PORTVERSION}
MOZILLA_BIN?=   ${PORTNAME}-bin
MOZILLA_EXEC_NAME?=${MOZILLA}
MOZ_RPATH?= ${MOZILLA}
USE_GNOME+= gtk20 libidl desktopfileutils
USE_ICONV=  yes
USE_PERL5_BUILD=yes
USE_XORG=   printproto sm xt xi xext x11 xinerama \
        ice xproto

MOZILLA_SUFX?=  none
MOZSRC?=    ${WRKSRC}
WRKSRC?=    ${WRKDIR}/mozilla
FAKEDIR?=   ${WRKDIR}/fake
PLIST?=     ${WRKDIR}/plist
PLISTD?=    ${WRKDIR}/plist_dirs
PLISTF?=    ${WRKDIR}/plist_files
MASTER_DIR?=    ${.CURDIR}/../../www/mozilla

KRB5_HOME?= /usr
MOZ_PIS_DIR?=       lib/${MOZILLA}/init.d

ESD_LIB?=   libesd.so.2
FREETYPE_LIB?=  libfreetype.so.9

GENERIC_MOZCONFIG?= ${.CURDIR}/../../www/mozilla/files/mozconfig-generic.in
PORT_MOZCONFIG?=    ${FILESDIR}/mozconfig.in
MOZCONFIG?=     ${WRKSRC}/.mozconfig
MOZILLA_PLIST_DIRS?=    bin include lib share/idl
GECKO_PTHREAD_LIBS!=${CC} -dumpspecs | ${GREP} -m 1 pthread: | ${SED} -e 's|^.*%{\!pg: %{pthread:|| ; s|}.*$$||' || ${TRUE}
PKGINSTALL?=    ${WRKDIR}/pkg-install
PKGDEINSTALL?=  ${WRKDIR}/pkg-deinstall
MASTER_MOZDIR?= ${PORTSDIR}/www/mozilla
PKGINSTALL_INC?=    ${MASTER_MOZDIR}/pkg-install.in
PKGDEINSTALL_INC?=  ${MASTER_MOZDIR}/pkg-deinstall.in

EXTRACT_AFTER_ARGS?=    | ${TAR} -xf - --exclude */CVS/*    \
            --exclude */macbuild/*          \
            --exclude */package/*           \
            --exclude mozilla/gc/boehm

MOZ_PKGCONFIG_FILES?=   ${MOZILLA}-gtkmozembed ${MOZILLA}-js \
            ${MOZILLA}-xpcom ${MOZILLA}-plugin

CFLAGS+=        ${PTHREAD_CFLAGS}
LIBS+=          ${PTHREAD_LIBS} -L${LOCALBASE}/lib -liconv

_USE_GECKO_OPTIONS_ALL= java debug logging optimized_cflags

.if !defined(USE_GECKO_OPTIONS)
USE_GECKO_OPTIONS=  debug logging optimized_cflags
.endif

debug_OPTION=   "Build a debugging image" off
java_OPTION=    "Enable JAVA xpcom" off
logging_OPTION= "Enable additional log messages" off
optimized_cflags_OPTION=    "Enable some additional optimizations" off

.for option in ${USE_GECKO_OPTIONS:L}
.if ${_USE_GECKO_OPTIONS_ALL:M${option}}!=""
OPTIONS+=   ${option:U} ${${option}_OPTION}
_${option}= ${TRUE}
.endif
.endfor

# Standard depends
_ALL_DEPENDS=   cairo dbm jpeg nspr nss png xft zip

cairo_LIB_DEPENDS=  cairo.2:${PORTSDIR}/graphics/cairo
cairo_MOZ_OPTIONS=  --enable-system-cairo
cairo_EXTRACT_AFTER_ARGS=   --exclude mozilla/gfx/cairo

dbm_EXTRACT_AFTER_ARGS=     --exclude mozilla/dbm

jpeg_LIB_DEPENDS=   jpeg.11:${PORTSDIR}/graphics/jpeg
jpeg_MOZ_OPTIONS=   --with-system-jpeg=${LOCALBASE}
jpeg_EXTRACT_AFTER_ARGS=    --exclude mozilla/jpeg

nspr_LIB_DEPENDS=   nspr4:${PORTSDIR}/devel/nspr
nspr_MOZ_OPTIONS=   --with-system-nspr

nss_LIB_DEPENDS=    nss3:${PORTSDIR}/security/nss
nss_EXTRACT_AFTER_ARGS= --exclude mozilla/security/nss
nss_MOZ_OPTIONS=    --with-system-nss
nss_CPPFLAGS+=      -I${LOCALBASE}/include/nss -I${LOCALBASE}/include/nss/nss
nss_LDFLAGS+=       -L${LOCALBASE}/lib/nss -Wl,-rpath,${PREFIX}/lib/${MOZ_RPATH}


png_LIB_DEPENDS=    png.6:${PORTSDIR}/graphics/png
png_MOZ_OPTIONS=    --with-system-png=${LOCALBASE}

xft_LIB_DEPENDS=    Xft.2:${PORTSDIR}/x11-fonts/libXft
zip_DEPENDS=        zip:${PORTSDIR}/archivers/zip

.for use in ${USE_MOZILLA}
${use:S/-/_WITHOUT_/}=  ${TRUE}
.endfor

.for dep in ${_ALL_DEPENDS}
.if !defined(_WITHOUT_${dep})
BUILD_DEPENDS+= ${${dep}_DEPENDS}
LIB_DEPENDS+=   ${${dep}_LIB_DEPENDS}
RUN_DEPENDS+=   ${${dep}_DEPENDS}
MOZ_OPTIONS+=   ${${dep}_MOZ_OPTIONS}
EXTRACT_AFTER_ARGS+=    ${${dep}_EXTRACT_AFTER_ARGS}
CPPFLAGS+=  ${${dep}_CPPFLAGS}
LDFLAGS+=   ${${dep}_LDFLAGS}
.endif
.endfor

# Standard options from README
MOZ_TOOLKIT?=   gtk2
MOZ_OPTIONS+=   --enable-crypto     \
        --disable-tests     \
        --enable-default-toolkit=${MOZ_TOOLKIT} \
        --enable-xft        \
        --with-pthreads
# Configure options for install
MOZ_OPTIONS+=   --x-includes=${LOCALBASE}/include \
        --x-libraries=${LOCALBASE}/lib
.if !defined(MOZ_EXTENSIONS)
MOZ_OPTIONS+=   --enable-extensions=default
.else
MOZ_OPTIONS+=   --enable-extensions=${MOZ_EXTENSIONS}
.endif
.if !defined(MOZ_GRAPHICS)
MOZ_OPTIONS+=   --enable-image-decoders=default
.else
MOZ_OPTIONS+=   --enable-image-decoders=${MOZ_GRAPHICS}
.endif
.if !defined(MOZ_PROTOCOLS)
MOZ_OPTIONS+=   --enable-necko-protocols=default
.else
MOZ_OPTIONS+=   --enable-necko-protocols=${MOZ_PROTOCOLS}
.endif
# others 
MOZ_OPTIONS+=   --with-system-zlib=/usr     \
        --with-gssapi=${KRB5_HOME}  \
        --disable-auto-deps     \
        --enable-chrome-format=jar  \
        --disable-cpp-exceptions    \
        --disable-cpp-rtti      \
        --disable-glibtest      \
        --disable-gtktest       \
        --disable-freetypetest      \
        --enable-double-buffer      \
        --enable-mathml         \
        --disable-installer     \
        --disable-md            \
        --disable-pedantic      \
        --disable-bidi          \
        --disable-xterm-updates     \
        --disable-xprint        \
        --enable-xinerama
MOZ_MK_OPTIONS+=    XP_UNIX=1       \
            PERL=${PERL}

.if defined(WITH_OPTIMIZED_CFLAGS)
CFLAGS:=    ${CFLAGS} -O2 -fno-strict-aliasing ${EXTRA_CFLAGS}
WITH_OPTIMIZE?= -O2
.else
CFLAGS:=    ${CFLAGS} ${EXTRA_CFLAGS}
WITH_OPTIMIZE?=
.endif

.if defined(WITH_SMB)
USE_GNOME+=     gnomevfs2
MOZ_OPTIONS+=   --enable-gnomevfs
.else
MOZ_OPTIONS+=   --disable-gnomevfs
.endif

.if !defined(STRIP) || ${STRIP} == ""
MOZ_OPTIONS+=   --disable-strip --disable-install-strip
.endif

.if defined(WITH_DEBUG)
MOZ_OPTIONS+=   --enable-debug
WITH_LOGGING=   yes
.else
MOZ_OPTIONS+=   --disable-debug             \
        --enable-optimize=${WITH_OPTIMIZE}
.endif

.if defined(WITH_JAVA) && defined(_WITH_JAVA)
USE_JAVA=   yes
JAVA_VERSION+=  1.4+
JAVA_OS+=   native
CONFIGURE_ENV+= JAVA_HOME="${JAVA_HOME}"
MOZ_OPTIONS+=   --enable-javaxpcom
.endif

.if defined(WITH_LOGGING)
MOZ_OPTIONS+=   --enable-logging
.else
MOZ_OPTIONS+=   --disable-logging
.endif

MOZ_SED_ARGS+=  -e's|@CPPFLAGS@|${CPPFLAGS}|g'      \
        -e 's|@CFLAGS@|${CFLAGS}|g'     \
        -e 's|@LDFLAGS@|${LDFLAGS}|g'       \
        -e 's|@LIBS@|${LIBS}|g'         \
        -e 's|@LOCALBASE@|${LOCALBASE}|g'   \
        -e 's|@FAKEDIR@|${FAKEDIR}|g'       \
        -e 's|@PERL@|${PERL5}|g'            \
        -e 's|@KRB5_HOME@|${KRB5_HOME}|g'   \
        -e 's|@MOZDIR@|${PREFIX}/lib/${MOZILLA}|g'  \
        -e 's|%%PREFIX%%|${PREFIX}|g'       \
        -e 's|%%CFLAGS%%|${CFLAGS}|g'       \
        -e 's|%%LDFLAGS%%|${LDFLAGS}|g'     \
        -e 's|%%LIBS%%|${LIBS}|g'       \
        -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
        -e 's|%%FAKEDIR%%|${FAKEDIR}|g'     \
        -e 's|%%PERL%%|${PERL5}|g'      \
        -e 's|%%KRB5_HOME%%|${KRB5_HOME}|g' \
        -e 's|%%MOZILLA%%|${MOZILLA}|g'     \
        -e 's|%%MOZILLA_BIN%%|${MOZILLA_BIN}|g' \
        -e 's|%%MOZDIR%%|${PREFIX}/lib/${MOZILLA}|g'
MOZCONFIG_SED?= ${SED} ${MOZ_SED_ARGS}

.if ${ARCH}=="sparc64"
# Work around miscompilation/mislinkage of the sCanonicalVTable hacks.
MOZ_OPTIONS+=   --disable-v1-string-abi
.endif

.else # bsd.port.post.mk

post-patch: gecko-post-patch gecko-moz-pis-patch

gecko-post-patch:
.if exists(${PKGINSTALL_INC})
    @${MOZCONFIG_SED} < ${PKGINSTALL_INC} > ${PKGINSTALL}
.endif
.if exists(${PKGDEINSTALL_INC})
    @${MOZCONFIG_SED} < ${PKGDEINSTALL_INC} > ${PKGDEINSTALL}
.endif
    @${RM} -f ${MOZCONFIG}
.if !defined(NOMOZCONFIG)
.if exists(${GENERIC_MOZCONFIG})
    @${MOZCONFIG_SED} < ${GENERIC_MOZCONFIG} >> ${MOZCONFIG}
.endif
    @if [ -e ${PORT_MOZCONFIG} ] ; then \
        ${MOZCONFIG_SED} < ${PORT_MOZCONFIG} >> ${MOZCONFIG} ; \
    fi
.for arg in ${MOZ_OPTIONS}
    @${ECHO_CMD} ac_add_options ${arg} >> ${MOZCONFIG}
.endfor
.for arg in ${MOZ_MK_OPTIONS}
    @${ECHO_CMD} mk_add_options ${arg} >> ${MOZCONFIG}
.endfor
.for var in ${MOZ_EXPORT}
    @${ECHO_CMD} "export ${var}" >> ${MOZCONFIG}
.endfor
.endif # .if !defined(NOMOZCONFIG)
.if exists(${MOZSRC}/build/unix/mozilla-config.in)
    @${REINPLACE_CMD} -e  's/%{idldir}/%idldir%/g ; \
        s|"%FULL_NSPR_CFLAGS%"|`nspr-config --cflags`|g ; \
        s|"%FULL_NSPR_LIBS%"|`nspr-config --libs`|g' \
            ${MOZSRC}/build/unix/mozilla-config.in
.endif
    @${REINPLACE_CMD} -e 's|<iconv.h>|\"${LOCALBASE}/include/iconv.h\"|g' \
        ${WRKSRC}/configure
.for subdir in config/system_wrappers nsprpub/config/system_wrappers js/src/config/system_wrappers_js
    @${MKDIR} ${MOZSRC}/${subdir}
    @${ECHO_CMD} "#pragma GCC system_header" >> ${MOZSRC}/${subdir}/iconv.h
    @${ECHO_CMD} "#pragma GCC visibility push(default)" >> ${MOZSRC}/${subdir}/iconv.h
    @${ECHO_CMD} "#include \"${LOCALBASE}/include/iconv.h\"" >> ${MOZSRC}/${subdir}/iconv.h
    @${ECHO_CMD} "#pragma GCC visibility pop" >> ${MOZSRC}/${subdir}/iconv.h
.endfor
.for subdir in "" nsprpub js/src
    @if [ -f ${MOZSRC}/${subdir}/config/system-headers ] ; then \
        ${ECHO_CMD} "fenv.h" >> ${MOZSRC}/${subdir}/config/system-headers ; \
        ${ECHO_CMD} "pthread_np.h" >> ${MOZSRC}/${subdir}/config/system-headers ; \
    fi
.endfor
    @${REINPLACE_CMD} -e 's|%%MOZILLA%%|${MOZILLA}|g' \
        ${WRKSRC}/config/autoconf.mk.in
    @${REINPLACE_CMD} -e 's|-pthread|${PTHREAD_LIBS}|g ; \
        s|echo aout|echo elf|g ; s|/usr/X11R6|${LOCALBASE}|g' \
        ${MOZSRC}/security/coreconf/FreeBSD.mk \
        ${MOZSRC}/js/src/Makefile.in
    @if [ -d ${WRKSRC}/directory/c-sdk ]; then \
        ${REINPLACE_CMD} -e 's|echo aout|echo elf|g' \
            ${WRKSRC}/directory/c-sdk/config/FreeBSD.mk \
            ${WRKSRC}/directory/c-sdk/configure ; \
    fi
    @${REINPLACE_CMD} -e 's|-lc_r|${PTHREAD_LIBS}|g ; \
        s|-lpthread|${PTHREAD_LIBS}|g ; \
        s|echo aout|echo elf|g ; \
        s|/usr/X11R6|${LOCALBASE}|g' \
        ${WRKSRC}/configure
    @${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g ; \
        s|%%LOCALBASE%%|${LOCALBASE}|g' \
            ${MOZSRC}/build/unix/run-mozilla.sh
    @${REINPLACE_CMD} -E -e 's|libesd\.so\.[0-9]+|libesd.so|g' \
        ${MOZSRC}/widget/src/gtk2/nsSound.cpp
    @${REINPLACE_CMD} -E -e 's|libcups\.so\.[0-9]+|libcups.so|g' \
        ${MOZSRC}/*/*/*/nsDeviceContextSpecG.cpp
    @${REINPLACE_CMD} -e 's|/usr/local/netscape|${LOCALBASE}|g ; \
        s|/usr/local/lib/netscape|${LOCALBASE}/lib|g' \
        ${MOZSRC}/xpcom/*/SpecialSystemDirectory.cpp

# handles mozilla pis scripts.
gecko-moz-pis-patch:
.for moz in ${MOZ_PIS_SCRIPTS}
    @${MOZCONFIG_SED} < ${FILESDIR}/${moz} > ${WRKDIR}/${moz}
.endfor

post-configure: gecko-post-configure

gecko-post-configure:
    @${ECHO_CMD} "#define JNIIMPORT" >> ${MOZSRC}/mozilla-config.h

post-build: gecko-post-build

gecko-post-build:
    @${REINPLACE_CMD} -e "s|\(Libs:.*\)\($$\)|\1 -Wl,-rpath,${PREFIX}/lib/${MOZ_RPATH}\2|" \
        ${MOZSRC}/build/unix/*.pc || ${TRUE}

pre-install: gecko-moz-pis-pre-install gecko-pre-install port-pre-install gecko-create-plist

.if !target(port-pre-install)
port-pre-install:
        @${DO_NADA}
.endif

gecko-pre-install:
.if !defined(NOGECKO_PLIST)
    @${RM} -rf ${FAKEDIR} ${PLIST} ${PLISTD} ${PLISTF}
    @${TOUCH} -f ${PLIST} ${PLISTD} ${PLISTF}
    @cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} \
        ${MAKEFILE} ${MAKE_ARGS} prefix=${FAKEDIR} ${INSTALL_TARGET}
.if defined(MOZILLA_SUFX) && ${MOZILLA_SUFX}!="none"
    ${MV} ${FAKEDIR}/bin/${MOZILLA:S/${MOZILLA_SUFX}//} ${FAKEDIR}/bin/${MOZILLA}
.if exists(${FAKEDIR}/bin/${MOZILLA:S/${MOZILLA_SUFX}//}-config)
    ${MV} ${FAKEDIR}/bin/${MOZILLA:S/${MOZILLA_SUFX}//}-config ${FAKEDIR}/bin/${MOZILLA}-config
.endif
.for pc in ${MOZ_PKGCONFIG_FILES:S|${MOZILLA_SUFX}||}
    ${SED} -e 's|Requires: ${MOZILLA:S/${MOZILLA_SUFX}//}|Requires: ${MOZILLA}|' \
    ${FAKEDIR}/lib/pkgconfig/${pc}.pc > ${FAKEDIR}/lib/pkgconfig/${pc:S/${MOZILLA:S,${MOZILLA_SUFX},,}/${MOZILLA}/}.pc
.endfor
    @${REINPLACE_CMD} -e 's|${MOZILLA}-bin|${MOZILLA:S/${MOZILLA_SUFX}//}|; \
        s|$${progbase}-bin|${MOZILLA:S/${MOZILLA_SUFX}//}-bin|' \
        ${FAKEDIR}/bin/${MOZILLA_EXEC_NAME}*
.endif
    @${REINPLACE_CMD} -e 's|${FAKEDIR}|${PREFIX}|g' \
        ${FAKEDIR}/bin/${MOZILLA_EXEC_NAME}*
    ${RM} -f ${FAKEDIR}/bin/*.bak
.endif

gecko-create-plist:
.if !defined(NOGECKO_PLIST)
# Create the plist
.for f in ${GECKO_PLIST_PRE_FILES}
    ${ECHO_CMD} ${f} >> ${PLISTF}
.endfor
.for f in ${GECKO_PLIST_PRE_DIRS}
    ${ECHO_CMD} "@dirrm ${f}" >> ${PLISTD}
.endfor
    ${MKDIR} ${FAKEDIR}/libdata
    ${MV} -f ${FAKEDIR}/lib/pkgconfig ${FAKEDIR}/libdata/ || ${TRUE}
    ${RM} -f ${FAKEDIR}/lib/pkgconfig
.for dir in ${MOZILLA_PLIST_DIRS}
    @cd ${FAKEDIR}/${dir} && ${FIND} -H -s * -type f | \
        ${SED} -e 's|^|${dir}/|' >> ${PLISTF} && \
        ${FIND} -d * -type d | \
        ${SED} -e 's|^|@dirrm ${dir}/|' >> ${PLISTD}
.endfor
.for pcfile in ${MOZ_PKGCONFIG_FILES}
    ${ECHO_CMD} "libdata/pkgconfig/${pcfile}.pc" >> ${PLISTF}
    @${REINPLACE_CMD} -e 's|${FAKEDIR}|${PREFIX}|g' \
        -e 's|${MOZILLA}-nspr = ${PORTVERSION}|nspr|' \
        ${FAKEDIR}/libdata/pkgconfig/${pcfile}.pc
.endfor
    ${CAT} ${PLISTF} | ${SORT} >> ${PLIST}
    ${CAT} ${PLISTD} | ${SORT} -r >> ${PLIST}
    ${ECHO_CMD} "@dirrmtry share/idl" >> ${PLIST}
    ${ECHO_CMD} "@exec ${LOCALBASE}/bin/update-desktop-database > /dev/null || ${TRUE}" >> ${PLIST}
    ${ECHO_CMD} "@unexec ${LOCALBASE}/bin/update-desktop-database > /dev/null || ${TRUE}" >> ${PLIST}
.endif # !defined(NOGECKO_PLIST)

do-install: gecko-do-install

gecko-do-install:
.if !defined(NOGECKO_INSTALL)
.for dir in ${MOZILLA_PLIST_DIRS}
.if !exists(${PREFIX}/${dir})
    ${MKDIR} ${PREFIX}/${dir}
    ${CHMOD} 755 ${PREFIX}/${dir}
.endif
    cd ${FAKEDIR}/${dir} && ${FIND} . | \
        ${CPIO} -pdm -L -R ${LIBOWN}:${LIBGRP} ${PREFIX}/${dir}
.endfor
.for pcfile in ${MOZ_PKGCONFIG_FILES}
    ${INSTALL_DATA} ${FAKEDIR}/libdata/pkgconfig/${pcfile}.pc \
        ${PREFIX}/libdata/pkgconfig/${pcfile}.pc
.endfor
.endif # !defined(NOGECKO_INSTALL)

gecko-moz-pis-pre-install:
.if defined(MOZ_PIS_SCRIPTS)
    ${MKDIR} ${FAKEDIR}/${MOZ_PIS_DIR}
.for moz in ${MOZ_PIS_SCRIPTS}
    ${INSTALL_SCRIPT} ${WRKDIR}/${moz} ${FAKEDIR}/${MOZ_PIS_DIR}
.endfor
.endif

post-install: gecko-post-install

gecko-post-install:
.if !defined(PACKAGE_BUILDING) && !defined(NO_MOZPKGINSTALL)
    @if [ -e ${PKGINSTALL} ] ; then \
        ${SETENV} PKG_PREFIX=${PREFIX} ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL; \
    fi
.endif
    @-update-desktop-database

.endif
.endif
# HERE THERE BE TACOS -- adamw