path: root/Mk/bsd.port.mk

# -*- mode: Fundamental; tab-width: 4; -*-
#
#   bsd.port.mk - 940820 Jordan K. Hubbard.
#   This file is in the public domain.
#
# $Id: bsd.port.mk,v 1.91 1995/01/03 11:51:59 jkh Exp $
#
# Please view me with 4 column tabs!


# Supported Variables and their behaviors:
#
# Variables that typically apply to all ports:
# 
# PORTSDIR      - The root of the ports tree (default: /usr/ports).
# DISTDIR       - Where to get gzip'd, tarballed copies of original sources
#                 (default: ${PORTSDIR}/distfiles).
# PREFIX        - Where to install things in general (default: /usr/local).
# MASTER_SITES  - Primary location(s) for distribution files if not found
#                 locally.
# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
#                 value.
# MASTER_SITE_FREEBSD - If set, only use the FreeBSD master repository for
#                 MASTER_SITES.
# PACKAGES      - A top level directory where all packages go (rather than
#                 going locally to each port). (default: ${PORTSDIR}/packages).
# GMAKE         - Set to path of GNU make if not in $PATH (default: gmake).
# XMKMF         - Set to path of `xmkmf' if not in $PATH (default: xmkmf).
#
# Variables that typically apply to an individual port:
#
# WRKDIR        - A temporary working directory that gets *clobbered* on clean.
# WRKSRC        - A subdirectory of ${WRKDIR} where the distribution actually
#                 unpacks to.  (Default: ${WRKDIR}/${DISTNAME} unless
#                 NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
# DISTNAME      - Name of port or distribution.
# DISTFILES     - Name(s) of archive file(s) containing distribution
#                 (default: ${DISTDIR}/${DISTNAME}${EXTRACT_SUFX}).
# PKGNAME       - Name of the package file to create if the DISTNAME 
#                 isn't really relevant for the port/package
# EXTRACT_ONLY  - If defined, a subset of ${DISTFILES} you want to
#                 actually extract.
# PATCHDIR      - A directory containing any required patches.
# SCRIPTDIR     - A directory containing any auxilliary scripts.
# FILESDIR      - A directory containing any miscellaneous additional files.
# PKGDIR        - A direction containing any package creation files.
#
# NO_EXTRACT    - Use a dummy (do-nothing) extract target.
# NO_CONFIGURE  - Use a dummy (do-nothing) configure target.
# NO_BUILD      - Use a dummy (do-nothing) build target.
# NO_PACKAGE    - Use a dummy (do-nothing) package target.
# NO_INSTALL    - Use a dummy (do-nothing) install target.
# NO_WRKSUBDIR  - Assume port unpacks directly into ${WRKDIR}.
# NO_WRKDIR     - There's no work directory at all; port does this someplace
#                 else.
# NO_DEPENDS    - Don't verify build of dependencies.
# USE_GMAKE     - Says that the port uses gmake.
# USE_IMAKE     - Says that the port uses imake.
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
#                       target.
# HAS_CONFIGURE - Says that the port has its own configure script.
# GNU_CONFIGURE - Set if you are using GNU configure (optional).
# CONFIGURE_ARGS - Pass these args to configure, if $HAS_CONFIGURE.
# IS_INTERACTIVE - Set this if your port needs to interact with the user
#               during a build.  User can then decide to skip this port by
#               setting BATCH, or compile ONLY interactive ports by setting
#               INTERACTIVE.
# DEPENDS       - A list of other ports this package depends on being
#                 made first, relative to ${PORTSDIR} (e.g. x11/tk, lang/tcl,
#                 etc).
# EXTRACT_CMD   - Command for extracting archive (default: tar).
# EXTRACT_SUFX  - Suffix for archive names (default: .tar.gz).
# EXTRACT_ARGS  - Arguments to ${EXTRACT_CMD} (default: -C ${WRKDIR} -xzf).
#
# NCFTP         - Full path to ncftp command if not in $PATH (default: ncftp).
# NCFTPFLAGS    - Arguments to ${NCFTP} (default: -N).
#
#
# Default targets and their behaviors:
#
# fetch         - Retrieves ${DISTFILES} into ${DISTDIR} as necessary.
# extract       - Unpacks ${DISTFILES} into ${WRKDIR}.
# configure     - Applies patches, if any, and runs either GNU configure, one
#                 or more local configure scripts or nothing, depending on
#                 what's available.
# patch         - Apply any provided patches to the source.
# build         - Actually compile the sources.
# install       - Install the results of a build.
# reinstall     - Install the results of a build, ignoring "already installed"
#                 flag.
# package       - Create a package from a build.
# describe      - Try to generate a one-line description for each port for
#                 use in INDEX files and the like.
#
# Default sequence for "all" is:  fetch extract configure build

.if exists(${.CURDIR}/../Makefile.inc)
.include "${.CURDIR}/../Makefile.inc"
.endif

# These need to be absolute since we don't know how deep in the ports
# tree we are and thus can't go relative.  They can, of course, be overridden
# by individual Makefiles.
PORTSDIR?=      ${DESTDIR}/usr/ports
X11BASE?=       /usr/X11R6
DISTDIR?=       ${PORTSDIR}/distfiles
PACKAGES?=      ${PORTSDIR}/packages
.if !defined(NO_WRKDIR)
WRKDIR?=        ${.CURDIR}/work
.else
WRKDIR?=        ${.CURDIR}
.endif
.if defined(NO_WRKSUBDIR)
WRKSRC?=        ${WRKDIR}
.else
WRKSRC?=        ${WRKDIR}/${DISTNAME}
.endif
PATCHDIR?=      ${.CURDIR}/patches
SCRIPTDIR?=     ${.CURDIR}/scripts
FILESDIR?=      ${.CURDIR}/files
PKGDIR?=        ${.CURDIR}/pkg
.if defined(USE_IMAKE)
PREFIX?=        ${X11BASE}
.else
PREFIX?=        /usr/local
.endif
.if defined(USE_GMAKE)
DEPENDS+=               ${PORTSDIR}/devel/gmake
.endif

.if exists(${PORTSDIR}/../Makefile.inc)
.include "${PORTSDIR}/../Makefile.inc"
.endif


# Change these if you'd prefer to keep the cookies someplace else.
EXTRACT_COOKIE?=    ${WRKDIR}/.extract_done
CONFIGURE_COOKIE?=  ${WRKDIR}/.configure_done
INSTALL_COOKIE?=    ${WRKDIR}/.install_done
BUILD_COOKIE?=      ${WRKDIR}/.build_done
PATCH_COOKIE?=      ${WRKDIR}/.patch_done

# How to do nothing.  Override if you, for some strange reason, would rather
# do something.
DO_NADA?=       echo -n

# Miscellaneous overridable commands:
GMAKE?=         gmake
XMKMF?=         xmkmf
MD5?=           md5
MD5_FILE?=      ${FILESDIR}/md5
MAKE_FLAGS?=    -f
MAKEFILE?=      Makefile

NCFTP?=         ncftp
NCFTPFLAGS?=    -N

TOUCH?=         touch
TOUCH_FLAGS?=   -f

PATCH?=         patch
PATCH_STRIP?=   -p0
.if defined(PATCH_DEBUG)
PATCH_ARGS?=    -d ${WRKSRC} -E ${PATCH_STRIP}
.else
PATCH_ARGS?=    -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
.endif

EXTRACT_CMD?=   tar
EXTRACT_SUFX?=  .tar.gz
EXTRACT_ARGS?=  -C ${WRKDIR} -xzf

PKG_CMD?=       pkg_create
PKG_ARGS?=      -v -c ${PKGDIR}/COMMENT -d ${PKGDIR}/DESCR -f ${PKGDIR}/PLIST -p ${PREFIX}
PKG_SUFX?=      .tgz

ALL_TARGET?=        all
INSTALL_TARGET?=    install

.if defined(MASTER_SITE_FREEBSD)
MASTER_SITE_OVERRIDE=  ftp://freebsd.cdrom.com/pub/FreeBSD/FreeBSD-current/ports/distfiles/ 
.endif

# I guess we're in the master distribution business! :)  As we gain mirror
# sites for distfiles, add them to this list.
.if !defined(MASTER_SITE_OVERRIDE)
MASTER_SITES+=  ftp://freebsd.cdrom.com/pub/FreeBSD/FreeBSD-current/ports/distfiles/
.else
MASTER_SITES=   ${MASTER_SITE_OVERRIDE}
.endif

# Derived names so that they're easily overridable.
DISTFILES?=     ${DISTNAME}${EXTRACT_SUFX}
PKGNAME?=       ${DISTNAME}

.if exists(${PACKAGES})
PKGFILE?=       ${PACKAGES}/${PKGNAME}${PKG_SUFX}
.else
PKGFILE?=       ${PKGNAME}${PKG_SUFX}
.endif

.if defined(GNU_CONFIGURE)
CONFIGURE_ARGS?=    --prefix=${PREFIX}
HAS_CONFIGURE=      yes
.endif

.MAIN: all

# If we're in BATCH mode and the port is interactive, or we're in
# interactive mode and the port is non-interactive, skip all the important
# targets.  The reason we have two modes is that one might want to leave
# a build in BATCH mode running overnight, then come back in the morning
# and do _only_ the interactive ones that required your intervention.
# This allows you to do both.
#
.if (defined(IS_INTERACTIVE) && defined(BATCH)) || (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
all:
    @${DO_NADA}
pre-build:
    @${DO_NADA}
build:
    @${DO_NADA}
pre-install:
    @${DO_NADA}
install:
    @${DO_NADA}
pre-fetch:
    @${DO_NADA}
fetch:
    @${DO_NADA}
pre-configure:
    @${DO_NADA}
configure:
    @${DO_NADA}
.endif

.if !target(all)
all: extract configure build
.endif

.if !target(is_depended)
is_depended:    all install
.endif

# The following are used to create easy dummy targets for disabling some
# bit of default target behavior you don't want.  They still check to see
# if the target exists, and if so don't do anything, since you might want
# to set this globally for a group of ports in a Makefile.inc, but still
# be able to override from an individual Makefile (since you can't _undefine_
# a variable in make!).
.if defined(NO_EXTRACT) && !target(extract)
extract:
    @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
check-md5:
    @${DO_NADA}
make-md5:
    @${DO_NADA}
.endif
.if defined(NO_CONFIGURE) && !target(configure)
configure:
    @${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
.if defined(NO_BUILD) && !target(build)
build:
    @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
.if defined(NO_PACKAGE) && !target(package)
package:
    @${DO_NADA}
.endif
.if defined(NO_INSTALL) && !target(install)
install:
    @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
.if defined(NO_PATCH) && !target(patch)
patch:
    @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif

# More standard targets start here.

.if !target(describe)
describe:
    @if [ -f ${PKGDIR}/COMMENT ]; then \
        echo "${.CURDIR}/${DISTNAME}:   `cat ${PKGDIR}/COMMENT`"; \
    else \
        echo "${.CURDIR}/${DISTNAME}:   ** No Description"; \
    fi
.endif

.if !target(reinstall)
reinstall: pre-reinstall install

pre-reinstall:
    @rm -f ${INSTALL_COOKIE}
.endif

.if !target(pre-install)
pre-install:
    @${DO_NADA}
.endif

.if !target(install)
install: ${INSTALL_COOKIE}

${INSTALL_COOKIE}:
    @echo "===>  Installing for ${DISTNAME}"
    @${MAKE} ${.MAKEFLAGS} pre-install
.if defined(USE_GMAKE)
    @(cd ${WRKSRC}; ${GMAKE} PREFIX=${PREFIX} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
    @(cd ${WRKSRC}; ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man)
.endif
.else defined(USE_GMAKE)
    @(cd ${WRKSRC}; ${MAKE} PREFIX=${PREFIX} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
    @(cd ${WRKSRC}; ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man)
.endif
.endif
    @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif

.if !target(pre-package)
pre-package:
    @${DO_NADA}
.endif

.if !target(package)
package: pre-package
# Makes some gross assumptions about a fairly simple package with no
# install, require or deinstall scripts.  Override the arguments with
# PKG_ARGS if your package is anything but run-of-the-mill.
    @if [ -d ${PKGDIR} ]; then \
        echo "===>  Building package for ${DISTNAME}"; \
        ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; \
    fi
.endif

.if !target(depends)
depends:
.if defined(DEPENDS)
    @echo "===>  ${DISTNAME} depends on:  ${DEPENDS}"
.if !defined(NO_DEPENDS)
    @for i in ${DEPENDS}; do \
        echo "===>  Verifying build for $$i"; \
        if [ ! -d $$i ]; then \
            echo ">> No directory for $$i.  Skipping.."; \
        else \
            (cd $$i; ${MAKE} ${.MAKEFLAGS} is_depended) ; \
        fi \
    done
    @echo "===>  Returning to build of ${DISTNAME}"
.endif
.endif
.endif

.if !target(pre-build)
pre-build:
    @${DO_NADA}
.endif

.if !target(build)
build: configure depends ${BUILD_COOKIE}

${BUILD_COOKIE}:
    @echo "===>  Building for ${DISTNAME}"
    @${MAKE} ${.MAKEFLAGS} pre-build
.if defined(USE_GMAKE)
    @(cd ${WRKSRC}; ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
.else defined(USE_GMAKE)
    @(cd ${WRKSRC}; ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
.endif
    @if [ -f ${SCRIPTDIR}/post-build ]; then \
        env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
          WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
          FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
          DEPENDS="${DEPENDS}" \
        sh ${SCRIPTDIR}/post-build; \
    fi
    @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif

.if !target(pre-patch)
pre-patch:
    @${DO_NADA}
.endif

.if !target(patch)
patch: ${PATCH_COOKIE}

${PATCH_COOKIE}:
    @${MAKE} ${.MAKEFLAGS} pre-patch
.if defined(PATCH_DEBUG)
    @if [ -d ${PATCHDIR} ]; then \
        echo "===>  Applying patches for ${DISTNAME}" ; \
        for i in ${PATCHDIR}/patch-*; do \
            echo "===>   Applying patch $$i" ; \
            ${PATCH} ${PATCH_ARGS} < $$i; \
        done; \
    fi
    @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.else
    @if [ -d ${PATCHDIR} ]; then \
        echo "===>  Applying patches for ${DISTNAME}" ; \
        for i in ${PATCHDIR}/patch-*; \
            do ${PATCH} ${PATCH_ARGS} < $$i; \
        done;\
    fi
    @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif
.endif

.if !target(pre-configure)
pre-configure:
    @${DO_NADA}
.endif

.if !target(configure)
configure: extract patch ${CONFIGURE_COOKIE}

${CONFIGURE_COOKIE}:
    @echo "===>  Configuring for ${DISTNAME}"
    @${MAKE} ${.MAKEFLAGS} pre-configure
    @if [ -f ${SCRIPTDIR}/pre-configure ]; then \
        env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
          WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
          FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
          DEPENDS="${DEPENDS}" \
        sh ${SCRIPTDIR}/pre-configure; \
    fi
    @if [ -f ${SCRIPTDIR}/configure ]; then \
        env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
          WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
          FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
          DEPENDS="${DEPENDS}" \
        sh ${SCRIPTDIR}/configure; \
    fi
.if defined(HAS_CONFIGURE)
    @(cd ${WRKSRC}; CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \
        INSTALL="${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP}" \
        INSTALL_PROGRAM="${INSTALL} ${COPY} ${STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}" \
        ./configure ${CONFIGURE_ARGS})
.endif
.if defined(USE_IMAKE)
.if defined(USE_GMAKE)
    @(cd ${WRKSRC}; ${XMKMF} && ${GMAKE} Makefiles)
.else
    @(cd ${WRKSRC}; ${XMKMF} && ${MAKE} Makefiles)
.endif
.endif
    @if [ -f ${SCRIPTDIR}/post-configure ]; then \
        env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
          WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
          FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
          DEPENDS="${DEPENDS}" \
        sh ${SCRIPTDIR}/post-configure; \
    fi
    @${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif

.if !target(pre-fetch)
pre-fetch:
    @${DO_NADA}
.endif

.if !target(fetch)
fetch: pre-fetch
    @if [ ! -d ${DISTDIR} ]; then mkdir -p ${DISTDIR}; fi
    @(cd ${DISTDIR}; \
     for file in ${DISTFILES}; do \
        if [ ! -f $$file ]; then \
            echo ">> $$file doesn't seem to exist on this system."; \
            echo ">> Attempting to fetch it from a master site."; \
            for site in ${MASTER_SITES}; do \
                if ${NCFTP} ${NCFTPFLAGS} $${site}$${file}; then \
                    break; \
                fi \
            done; \
            if [ ! -f $$file ]; then \
                echo ">> Couldn't fetch it - please try to retreive this";\
                echo ">> port manually into ${DISTDIR} and try again."; \
                exit 1; \
            fi; \
        fi \
     done)
.endif

.if !target(make-md5)
make-md5: fetch
    @if [ ! -d ${FILESDIR} ]; then mkdir -p ${FILESDIR}; fi
    @if [ -f ${MD5_FILE} ]; then rm -f ${MD5_FILE}; fi
    
    @(cd ${DISTDIR}; \
    for file in ${DISTFILES}; do \
        ${MD5} $$file >> ${MD5_FILE}; \
    done)
.endif

.if !target(check-md5)
check-md5: fetch
    @if [ ! -f ${MD5_FILE} ]; then \
        echo ">> No MD5 checksum file."; \
        exit 1; \
    fi
    @(cd ${DISTDIR}; \
    for file in ${DISTFILES}; do \
        CKSUM=`${MD5} $$file | awk '{print $$4}'`; \
        CKSUM2=`grep "($$file)" ${MD5_FILE} | awk '{print $$4}'`; \
        if [ "$$CKSUM" != "$$CKSUM2" ]; then \
            echo ">> Checksum mismatch for $$file"; \
            exit 1; \
        fi; \
    done)
    @echo "Checksums OK."
.endif

.if !target(pre-extract)
pre-extract:
    @${DO_NADA}
.endif

.if !target(extract)
# We need to depend on .extract_done rather than the presence of ${WRKDIR}
# because if the user interrupts the extract in the middle (and it's often
# a long procedure), we get tricked into thinking that we've got a good dist
# in ${WRKDIR}.
extract: fetch pre-extract ${EXTRACT_COOKIE}

${EXTRACT_COOKIE}:
    @echo "===>  Extracting for ${DISTNAME}"
    @rm -rf ${WRKDIR}
    @mkdir -p ${WRKDIR}
.if defined(EXTRACT_ONLY)
    @for file in ${EXTRACT_ONLY}; do \
        ${EXTRACT_CMD} ${EXTRACT_ARGS} ${DISTDIR}/$$file ; \
    done
.else
    @for file in ${DISTFILES}; do \
        ${EXTRACT_CMD} ${EXTRACT_ARGS} ${DISTDIR}/$$file ; \
    done
.endif
    @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
.endif

.if !target(pre-clean)
pre-clean:
    @${DO_NADA}
.endif

.if !target(clean)
clean: pre-clean
    @echo "===>  Cleaning for ${DISTNAME}"
    @rm -f ${EXTRACT_COOKIE} ${CONFIGURE_COOKIE} ${INSTALL_COOKIE} \
        ${BUILD_COOKIE} ${PATCH_COOKIE}
.if !defined(NO_WRKDIR)
    @rm -rf ${WRKDIR}
.endif
.endif

# No pre-targets for depend or tags.  It would be silly.

# Depend is generally meaningless for arbitrary ports, but if someone wants
# one they can override this.  This is just to catch people who've gotten into
# the habit of typing `make depend all install' as a matter of course.
#
.if !target(depend)
depend:
.endif

# Same goes for tags
.if !target(tags)
tags:
.endif