path: root/Mk/bsd.qt.mk

#-*- tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
#
# Port variables:
# USE_QT*           - List of Qt modules to depend on, with optional '_build'
#                     and '_run' suffixes. Define it empty to include this file
#                     without depending on Qt ports.
# QT_DIST           - The port belongs to the Qt distribution. Set to 'yes' for
#                     Qt 4, or to the distribution name(s) for newer versions.
# QT_NONSTANDARD    - Suppress modification of configure and make environment.
#
# Global switches (for inclusion into /etc/make.conf):
# QT4_OPTIONS       - A list of (Qt 4-only) global options; can be CUPS, NAS
#                     and/or QGTKSTYLE. If set, Qt will be built with support
#                     for:
#                      * Common UNIX Printing System (CUPS);
#                      * Network Audio System (NAS);
#                      * GTK+-based Qt theme (QGTKSTYLE).

.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

Qt_Include_MAINTAINER=  kde@FreeBSD.org
Qt_Pre_Include= bsd.qt.mk

# Qt versions currently supported by the framework.
_QT_SUPPORTED?= 4 5
QT4_VERSION?=   4.8.7
QT5_VERSION?=   5.10.1

_QT_RELNAME=    qt${_QT_VERSION:R:R}
_QT_VERSION=    # empty
.for ver in ${_QT_SUPPORTED}
. if defined(USE_QT${ver})
.  if empty(_QT_VERSION)
_QT_VERSION=    ${QT${ver}_VERSION}
.  else
# Reject different USE_QT*.
IGNORE?=        can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
.  endif
. endif
.endfor

.if empty(_QT_VERSION)
# The file was included without USE_QT*.
IGNORE?=        can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
.endif

.if defined(QT_DIST)
QT_NONSTANDARD= yes

MASTER_SITES=   ${MASTER_SITE_QT}
DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo

LICENSE?=       LGPL21

. if !exists(${PKGDIR}/pkg-descr)
DESCR?=         ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr
. endif

# Stage support.
DESTDIRNAME=    INSTALL_ROOT

. if ${_QT_VERSION:M4*}
MASTER_SITE_SUBDIR?=    official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/
DISTNAME=       qt-everywhere-opensource-src-${_QT_VERSION}
DIST_SUBDIR=        KDE
. else
MASTER_SITE_SUBDIR?=    official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules/
# www/qt5-webengine hackery: The tarballs of 5.9.5 had a different naming scheme.
.  if ${QT5_VERSION} == "5.9.5"
DISTNAME=       ${QT_DIST:S,^,qt,:S,$,-opensource-src-${DISTVERSION},}
.  else
DISTNAME=       ${QT_DIST:S,^,qt,:S,$,-everywhere-src-${DISTVERSION},}
.  endif
DISTFILES=      ${DISTNAME:S,$,${EXTRACT_SUFX},}
DIST_SUBDIR=        KDE/Qt/${_QT_VERSION}

USES+=          tar:xz

# Qt (at least when used with qmake) has a tendency to overlink: some libraries
# have dependencies on others in the mkspec configurations and the latter are
# always passed to the linker even if they are not actually used. By passing
# --as-needed to the linker by default when building the Qt ports we do not
# have to declare a lot of unnecessary dependencies in USE_QT5.
# This could arguably work for Qt4 too, but since it is maintenance mode it is
# better not to fix what is not explicitly broken there.
LDFLAGS+=       -Wl,--as-needed

.  if ${.TARGETS:Mmakesum} || ${.TARGETS:Mfetch} && \
    defined(DISABLE_SIZE) && defined(NO_CHECKSUM)
# Ensure that the "makesum" target (with its inner "fetch" one) uses
# devel/qt*/distinfo for every port.
.       if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}
QT_DIST=        3d activeqt androidextras base canvas3d charts connectivity \
                datavis3d declarative doc gamepad graphicaleffects imageformats \
                location macextras multimedia networkauth purchasing \
                quickcontrols2 quickcontrols remoteobjects script scxml sensors \
                serialbus serialport speech svg tools translations \
                virtualkeyboard wayland webchannel websockets webview \
                winextras x11extras xmlpatterns
.       endif
.  endif

.  if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies.
USES+=          pkgconfig
.  endif

# -nomake is only used by qtbase's configure script.
# Other ports from other Qt modules will automatically build examples and
# tests if the directories exist because of mkspecs/features/qt_parts.prf.
EXTRACT_AFTER_ARGS?=    ${DISTNAME:S,$,/examples,:S,^,--exclude ,} \
                        ${DISTNAME:S,$,/tests,:S,^,--exclude ,} \
                        --no-same-owner --no-same-permissions
. endif # ! ${_QT_VERSION:M4*}

CONFIGURE_ENV+= MAKE="${MAKE:T}"

CONFIGURE_ARGS+=-opensource -confirm-license \
                -no-pch \
                -prefix ${PREFIX} \
                -bindir ${PREFIX}/${QT_BINDIR_REL} \
                -headerdir ${PREFIX}/${QT_INCDIR_REL} \
                -libdir ${PREFIX}/${QT_LIBDIR_REL} \
                -plugindir ${PREFIX}/${QT_PLUGINDIR_REL} \
                -importdir ${PREFIX}/${QT_IMPORTDIR_REL} \
                -datadir ${PREFIX}/${QT_DATADIR_REL} \
                -docdir ${PREFIX}/${QT_DOCDIR_REL} \
                -translationdir ${PREFIX}/${QT_L10NDIR_REL} \
                -sysconfdir ${PREFIX}/${QT_ETCDIR_REL}

. if ${_QT_VERSION:M4*}
CONFIGURE_ARGS+=-fast \
                -platform ${QMAKESPEC} \
                -system-libjpeg -system-libpng \
                -system-libmng -system-libtiff -system-zlib \
                -no-phonon-backend \
                -examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/examples \
                -demosdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/demos
. else
CONFIGURE_ARGS+=-nomake examples -nomake tests \
                -platform ${QMAKESPECNAME} \
                -archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
                -libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
                -qmldir ${PREFIX}/${QT_QMLDIR_REL} \
                -examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
                -testsdir ${PREFIX}/${QT_TESTDIR_REL}
.  if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)
CONFIGURE_ARGS+=-no-sse2
.  endif
# Work around a bug in current binutils, where the gold linker creates
# duplicate symbols. See pr 218187. Disable the gold-linker for Qt5 ports.
CONFIGURE_ARGS+=    -no-use-gold-linker
# Pass -recheck-all so that multiple calls to the configure script really
# re-run all checks.
CONFIGURE_ARGS+=    -recheck-all
. endif

. if defined(WANT_QT_DEBUG) || defined(WITH_DEBUG)
WITH_DEBUG=     yes
STRIP=          # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+=-debug -separate-debug-info
# Override configuration in global qconfig.pri.
QMAKE_ARGS+=    QT_CONFIG+="debug separate_debug_info" \
                QT_CONFIG-="release"
PLIST_SUB+=     DEBUG=""
. else
CONFIGURE_ARGS+=-release -no-separate-debug-info
QMAKE_ARGS+=    QT_CONFIG+="release" \
                QT_CONFIG-="debug separate_debug_info"
PLIST_SUB+=     DEBUG="@comment "
. endif

. if defined(WANT_QT_VERBOSE_CONFIGURE)
CONFIGURE_ARGS+=-verbose
. endif

. if ${QT_DIST} == "base" || ${_QT_VERSION:M4*}
.  if ${_QT_VERSION:M4*}
_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \
                    ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool \
                    ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test
# Patch in proper name for armv6 architecture: https://gcc.gnu.org/ml/gcc-patches/2015-06/msg01679.html
_EXTRA_PATCHES_QT4+=    ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-armv6
_EXTRA_PATCHES_QT4+=    ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-aarch64
.  else
_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \
                    ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf \
                    ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_common_bsd_bsd.conf
.  endif
EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \
        ${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}
. endif

# Override settings installed in qconfig.h and *.pri files. The flags will be
# installed along with the port, but have to be passed as arguments while
# building the port itself. Flags prefixed with "-" (e.g., "-CUPS" and "-cups")
# are needed to disable some features.
. if !defined(${QT_MODNAME}) || empty(${QT_MODNAME})
# Used for both qconfig-*.h and qt_config_*.pri; it can't be empty.
QT_MODNAME=     ${PORTNAME}
. endif
QT_DEFINES?=    # For qconfig.h flags (without "QT_" prefix).
QT_CONFIG?=     # For *.pri files QT_CONFIG flags.
. if ${QT_DEFINES}
QMAKE_ARGS+=    DEFINES+="${QT_DEFINES:O:u:C/^([^-])/QT_\1/:C/^-/QT_NO_/:O}"
.  if ${QT_DEFINES:N-*}
# Use a script to cleanup qconfig-modules.h (see qt-post-install).
PKGDEINSTALL=   ${WRKDIR}/pkg-deinstall
.  endif
. endif
. if ${QT_CONFIG:N-*}
QMAKE_ARGS+=    QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif
. if ${QT_CONFIG:M-*}
QMAKE_ARGS+=    QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif

# Add a RUN_DEPENDS on misc/qtchooser to select the binaries.
# The binaries of both supported Qt versions are installed to
# ${LOCALBASE}/lib/qt[45]/bin. The port misc/qtchooser installs
# wrapper binaries into ${LOCALBASE}/bin, and chooses the correct
# one depending on the value of QT_SELECT (which we pass to both
# CONFIGURE_ENV and MAKE_ENV). Therefore make all QT_DIST ports
# RUN_DEPEND on it.
RUN_DEPENDS+=   qtchooser:misc/qtchooser

PLIST_SUB+=     SHORTVER=${DISTVERSION:R} \
                FULLVER=${DISTVERSION:C/-.*//}
.endif # defined(QT_DIST)

# A wrapper (qtchooser) is used to invoke binaries.
QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin
QT_INCDIR_REL?= include/${_QT_RELNAME}
QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_ARCHDIR_REL?=${QT_LIBDIR_REL}
QT_PLUGINDIR_REL?=  ${QT_ARCHDIR_REL}/plugins
QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}
QT_IMPORTDIR_REL?=  ${QT_ARCHDIR_REL}/imports
QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml
QT_DATADIR_REL?=share/${_QT_RELNAME}
QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}
QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations
QT_ETCDIR_REL?= etc/xdg
QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}
QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests
QT_CMAKEDIR_REL?=   lib/cmake
QT_QTCHOOSERDIR_REL?=   ${QT_ETCDIR_REL}/qtchooser

# Not customizable.
.if ${_QT_VERSION:M4*}
QT_MKSPECDIR_REL=   ${QT_DATADIR_REL}/mkspecs

_QT_LIBVER=     # empty
.else
QT_MKSPECDIR_REL=   ${QT_ARCHDIR_REL}/mkspecs

_QT_LIBVER=     ${_QT_VERSION:R:R}
.endif

LRELEASE?=      ${QT_BINDIR}/lrelease
LUPDATE?=       ${QT_BINDIR}/lupdate
MOC?=           ${QT_BINDIR}/moc
RCC?=           ${QT_BINDIR}/rcc
UIC?=           ${QT_BINDIR}/uic
QMAKE?=         ${QT_BINDIR}/qmake
# Needed to redefine the qmake target for internal Qt configuration.
_QMAKE?=        ${QMAKE}
QMAKESPECNAME?= freebsd-${QMAKE_COMPILER}
QMAKESPEC?=     ${QT_MKSPECDIR}/${QMAKESPECNAME}

# The whole Qt distribution should be built with the same compiler, but it's
# better to support custom settings. Dereferencing the detection allows to
# avoid forking a shell on each inclusion of this file, and to catch any CXX
# customization (via USE_GCC, etc.).
QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in *clang*) echo clang ;; *) echo g++ ;; esac)

# Import QMAKE_ENV and QMAKE_ARGS definitions.
USES+=          qmake:_env

.for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \
    QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC \
    CMAKE QTCHOOSER
QT_${dir}DIR=   ${PREFIX}/${QT_${dir}DIR_REL}
# Export all directories to the plist substituion for QT_DIST ports.
# For the others, exclude QT_CMAKEDIR and QT_ETCDIR.
.  if (${dir:NCMAKE} && ${dir:NETC}) || defined(QT_DIST)
PLIST_SUB+=     QT_${dir}DIR="${QT_${dir}DIR_REL}"
.  endif
.endfor

# Pass the chosen Qt version to the environment for qtchooser.
CONFIGURE_ENV+= QT_SELECT=${_QT_RELNAME}
MAKE_ENV+=  QT_SELECT=${_QT_RELNAME}

# Make sure both the installed mkspecs as well as the ones being built are
# found, with the ones from the port being built having preference.
CONFIGURE_ENV+= QMAKEMODULES="${WRKSRC}/mkspecs/modules:${LOCALBASE}/${QT_MKSPECDIR_REL}/modules"
MAKE_ENV+=      QMAKEMODULES="${WRKSRC}/mkspecs/modules:${LOCALBASE}/${QT_MKSPECDIR_REL}/modules"

.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)

Qt_Post_Include=    bsd.qt.mk

.if !defined(QT_NONSTANDARD)
CONFIGURE_ENV+= QTDIR="${QT_ARCHDIR}" QMAKE="${QMAKE}" \
                MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \
                QMAKESPEC="${QMAKESPEC}"
CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \
                --with-qt-libraries=${QT_LIBDIR} \
                --with-extra-includes=${LOCALBASE}/include \
                --with-extra-libs=${LOCALBASE}/lib
.endif # !defined(QT_NONSTANDARD)

_USE_QT_ALL=    assistant dbus declarative designer doc gui help \
                imageformats l10n linguist linguisttools multimedia \
                network opengl pixeltool qdbusviewer qmake script \
                scripttools sql sql-mysql sql-odbc sql-pgsql \
                sql-sqlite2 sql-sqlite3 svg testlib webkit \
                xml xmlpatterns
.if ${ARCH} == amd64 || ${ARCH} == i386
_USE_QT_ALL+=   sql-ibase
.endif

_USE_QT4_ONLY=  accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \
                codecs-kr codecs-tw corelib demo graphicssystems-opengl \
                help-tools iconengines inputmethods makeqpf moc phonon \
                phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \
                qtestlib qvfb rcc uic uic3 xmlpatterns-tool

_USE_QT5_ONLY=  3d buildtools canvas3d charts concurrent connectivity \
                core datavis3d diag examples gamepad \
                graphicaleffects location paths phonon4 plugininfo printsupport \
                qdbus qdoc qdoc-data qev qml quick quickcontrols \
                quickcontrols2 scxml sensors serialbus serialport speech \
                sql-tds uiplugin uitools virtualkeyboard wayland webchannel \
                webengine websockets websockets-qml widgets x11extras

3d_PORT=        graphics/${_QT_RELNAME}-3d
3d_LIB=     libQt${_QT_LIBVER}3DCore.so

accessible_PORT=    accessibility/${_QT_RELNAME}-accessible
accessible_PATH=    ${LOCALBASE}/${QT_PLUGINDIR_REL}/accessible/libqtaccessiblewidgets.so

assistant_PORT=     devel/${_QT_RELNAME}-assistant
assistant_PATH=     ${LOCALBASE}/${QT_BINDIR_REL}/assistant

assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp
assistant-adp_PATH= assistant_adp

assistantclient_PORT=   devel/${_QT_RELNAME}-libqtassistantclient
assistantclient_LIB=    libQt${_QT_LIBVER}AssistantClient.so

buildtools_PORT=    devel/${_QT_RELNAME}-buildtools
buildtools_PATH=    ${LOCALBASE}/${QT_BINDIR_REL}/moc

canvas3d_PORT=      x11-toolkits/${_QT_RELNAME}-canvas3d
canvas3d_PATH=      ${LOCALBASE}/${QT_QMLDIR_REL}/QtCanvas3D/qmldir

charts_PORT=        x11-toolkits/${_QT_RELNAME}-charts
charts_LIB=     libQt${_QT_LIBVER}Charts.so

clucene_PORT=       textproc/${_QT_RELNAME}-clucene
clucene_LIB=        libQt${_QT_LIBVER}CLucene.so

codecs-cn_PORT=     chinese/${_QT_RELNAME}-codecs-cn
codecs-cn_PATH=     ${LOCALBASE}/${QT_PLUGINDIR_REL}/codecs/libqcncodecs.so

codecs-jp_PORT=     japanese/${_QT_RELNAME}-codecs-jp
codecs-jp_PATH=     ${LOCALBASE}/${QT_PLUGINDIR_REL}/codecs/libqjpcodecs.so

codecs-kr_PORT=     korean/${_QT_RELNAME}-codecs-kr
codecs-kr_PATH=     ${LOCALBASE}/${QT_PLUGINDIR_REL}/codecs/libqkrcodecs.so

codecs-tw_PORT=     chinese/${_QT_RELNAME}-codecs-tw
codecs-tw_PATH=     ${LOCALBASE}/${QT_PLUGINDIR_REL}/codecs/libqtwcodecs.so

concurrent_PORT=    devel/${_QT_RELNAME}-concurrent
concurrent_LIB= libQt${_QT_LIBVER}Concurrent.so

connectivity_PORT=  comms/${_QT_RELNAME}-connectivity
connectivity_LIB=   libQt${_QT_LIBVER}Bluetooth.so

core_PORT=          devel/${_QT_RELNAME}-core
core_LIB=           libQt${_QT_LIBVER}Core.so

corelib_PORT=       devel/${_QT_RELNAME}-corelib
corelib_LIB=        ${core_LIB}

datavis3d_PORT=     x11-toolkits/${_QT_RELNAME}-datavis3d
datavis3d_LIB=      libQt${_QT_LIBVER}DataVisualization.so

dbus_PORT=          devel/${_QT_RELNAME}-dbus
dbus_LIB=           libQt${_QT_LIBVER}DBus.so

declarative_PORT=   x11-toolkits/${_QT_RELNAME}-declarative
declarative_LIB=    libQt${_QT_LIBVER}Declarative.so

demo_PORT=          misc/${_QT_RELNAME}-qtdemo
demo_PATH=          ${LOCALBASE}/${QT_BINDIR_REL}/qtdemo

designer_PORT=      devel/${_QT_RELNAME}-designer
designer_PATH=      ${LOCALBASE}/${QT_BINDIR_REL}/designer

diag_PORT=      sysutils/${_QT_RELNAME}-qtdiag
diag_PATH=      ${LOCALBASE}/${QT_BINDIR_REL}/qtdiag

doc_PORT=           misc/${_QT_RELNAME}-doc
doc_PATH=           ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}

examples_PORT=      misc/${_QT_RELNAME}-examples
examples_PATH=      ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}

gamepad_PORT=       x11-toolkits/${_QT_RELNAME}-gamepad
gamepad_LIB=        libQt${_QT_LIBVER}Gamepad.so

graphicaleffects_PORT=  graphics/${_QT_RELNAME}-graphicaleffects
graphicaleffects_PATH=  ${LOCALBASE}/${QT_QMLDIR_REL}/QtGraphicalEffects/qmldir

graphicssystems-opengl_PORT=    x11/${_QT_RELNAME}-graphicssystems-opengl
graphicssystems-opengl_PATH=    ${LOCALBASE}/${QT_PLUGINDIR_REL}/graphicssystems/libqglgraphicssystem.so

gui_PORT=           x11-toolkits/${_QT_RELNAME}-gui
gui_LIB=            libQt${_QT_LIBVER}Gui.so

help_PORT=          devel/${_QT_RELNAME}-help
help_LIB=           libQt${_QT_LIBVER}Help.so

help-tools_PORT=    devel/${_QT_RELNAME}-help-tools
help-tools_PATH=    ${LOCALBASE}/${QT_BINDIR_REL}/qhelpgenerator

iconengines_PORT=   graphics/${_QT_RELNAME}-iconengines
iconengines_PATH=   ${LOCALBASE}/${QT_PLUGINDIR_REL}/iconengines/libqsvgicon.so

imageformats_PORT=  graphics/${_QT_RELNAME}-imageformats
imageformats_PATH=  ${LOCALBASE}/${QT_PLUGINDIR_REL}/imageformats/libqtiff.so

inputmethods_PORT=  x11/${_QT_RELNAME}-inputmethods
inputmethods_PATH=  ${LOCALBASE}/${QT_PLUGINDIR_REL}/inputmethods/libqimsw-multi.so

linguist_PORT=      devel/${_QT_RELNAME}-linguist
linguist_PATH=      ${LOCALBASE}/${QT_BINDIR_REL}/linguist

linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools
linguisttools_PATH= ${LOCALBASE}/${QT_BINDIR_REL}/lrelease

location_PORT=      devel/${_QT_RELNAME}-location
location_LIB=       libQt${_QT_LIBVER}Location.so

l10n_PORT=          misc/${_QT_RELNAME}-l10n
l10n_PATH=          ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}

makeqpf_PORT=       devel/${_QT_RELNAME}-makeqpf
makeqpf_PATH=       ${LOCALBASE}/${QT_BINDIR_REL}/makeqpf

moc_PORT=           devel/${_QT_RELNAME}-moc
moc_PATH=           ${LOCALBASE}/${QT_BINDIR_REL}/moc

multimedia_PORT=    multimedia/${_QT_RELNAME}-multimedia
multimedia_LIB=     libQt${_QT_LIBVER}Multimedia.so

network_PORT=       net/${_QT_RELNAME}-network
network_LIB=        libQt${_QT_LIBVER}Network.so

opengl_PORT=        graphics/${_QT_RELNAME}-opengl
opengl_LIB=     libQt${_QT_LIBVER}OpenGL.so

paths_PORT=     sysutils/${_QT_RELNAME}-qtpaths
paths_PATH=     ${LOCALBASE}/${QT_BINDIR_REL}/qtpaths

pixeltool_PORT=     graphics/${_QT_RELNAME}-pixeltool
pixeltool_PATH=     ${LOCALBASE}/${QT_BINDIR_REL}/pixeltool

phonon_PORT=        multimedia/phonon
phonon_LIB=     libphonon.so

phonon4_PORT=       multimedia/${_QT_RELNAME}-phonon4
phonon4_LIB=        libphonon4${_QT_RELNAME}.so

phonon-gst_PORT=    multimedia/phonon-gstreamer
phonon-gst_PATH=    ${LOCALBASE}/${QT_PLUGINDIR_REL}/phonon_backend/libphonon_gstreamer.so

plugininfo_PORT=        sysutils/${_QT_RELNAME}-qtplugininfo
plugininfo_PATH=        ${LOCALBASE}/${QT_BINDIR_REL}/qtplugininfo

porting_PORT=       devel/${_QT_RELNAME}-porting
porting_PATH=       ${LOCALBASE}/${QT_BINDIR_REL}/qt3to4

printsupport_PORT=  print/${_QT_RELNAME}-printsupport
printsupport_LIB=   libQt${_QT_LIBVER}PrintSupport.so

qdbus_PORT=         devel/${_QT_RELNAME}-qdbus
qdbus_PATH=         ${LOCALBASE}/${QT_BINDIR_REL}/qdbus

qdbusviewer_PORT=   devel/${_QT_RELNAME}-qdbusviewer
qdbusviewer_PATH=   ${LOCALBASE}/${QT_BINDIR_REL}/qdbusviewer

qdoc_PORT=          devel/${_QT_RELNAME}-qdoc
qdoc_PATH=          ${LOCALBASE}/${QT_BINDIR_REL}/qdoc

qdoc-data_PORT=     devel/${_QT_RELNAME}-qdoc-data
qdoc-data_PATH=     ${LOCALBASE}/${QT_DOCDIR_REL}/global/config.qdocconf

qdoc3_PORT=         devel/${_QT_RELNAME}-qdoc3
qdoc3_PATH=         ${LOCALBASE}/${QT_BINDIR_REL}/qdoc3

qev_PORT=           x11/${_QT_RELNAME}-qev
qev_PATH=           ${LOCALBASE}/${QT_BINDIR_REL}/qev

qmake_PORT=         devel/${_QT_RELNAME}-qmake
qmake_PATH=         ${LOCALBASE}/${QT_BINDIR_REL}/qmake

qml_PORT=           lang/${_QT_RELNAME}-qml
qml_LIB=            libQt${_QT_LIBVER}Qml.so

qmlviewer_PORT=     devel/${_QT_RELNAME}-qmlviewer
qmlviewer_PATH=     ${LOCALBASE}/${QT_BINDIR_REL}/qmlviewer

qt3support_PORT=    devel/${_QT_RELNAME}-qt3support
qt3support_LIB=     libQt${_QT_LIBVER}3Support.so

qtconfig_PORT=      misc/${_QT_RELNAME}-qtconfig
qtconfig_PATH=      ${LOCALBASE}/${QT_BINDIR_REL}/qtconfig

qtestlib_PORT=      ${testlib_PORT}
qtestlib_LIB=       ${testlib_LIB}

quick_PORT=         x11-toolkits/${_QT_RELNAME}-quick
quick_LIB=          libQt${_QT_LIBVER}Quick.so

quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols
quickcontrols_PATH= ${LOCALBASE}/${QT_QMLDIR_REL}/QtQuick/Controls/qmldir

quickcontrols2_PORT=    x11-toolkits/${_QT_RELNAME}-quickcontrols2
quickcontrols2_LIB= libQt${_QT_LIBVER}QuickControls2.so

qvfb_PORT=          devel/${_QT_RELNAME}-qvfb
qvfb_PATH=          ${LOCALBASE}/${QT_BINDIR_REL}/qvfb

rcc_PORT=           devel/${_QT_RELNAME}-rcc
rcc_PATH=           ${LOCALBASE}/${QT_BINDIR_REL}/rcc

sensors_PORT=       comms/${_QT_RELNAME}-sensors
sensors_LIB=        libQt${_QT_LIBVER}Sensors.so

script_PORT=        devel/${_QT_RELNAME}-script
script_LIB=     libQt${_QT_LIBVER}Script.so

scripttools_PORT=   devel/${_QT_RELNAME}-scripttools
scripttools_LIB=    libQt${_QT_LIBVER}ScriptTools.so

scxml_PORT=     devel/${_QT_RELNAME}-scxml
scxml_LIB=      libQt${_QT_LIBVER}Scxml.so

serialbus_PORT=     comms/${_QT_RELNAME}-serialbus
serialbus_LIB=      libQt${_QT_LIBVER}SerialBus.so

serialport_PORT=    comms/${_QT_RELNAME}-serialport
serialport_LIB= libQt${_QT_LIBVER}SerialPort.so

speech_PORT=        accessibility/${_QT_RELNAME}-speech
speech_LIB=         libQt${_QT_LIBVER}TextToSpeech.so

sql_PORT=           databases/${_QT_RELNAME}-sql
sql_LIB=            libQt${_QT_LIBVER}Sql.so

sql-pgsql_PATH=     ${LOCALBASE}/${QT_PLUGINDIR_REL}/sqldrivers/libqsqlpsql.so

.  if ${_QT_VERSION:M4*}
sql-sqlite2_PORT=   databases/${_QT_RELNAME}-sqlite-plugin
.  endif

sql-sqlite3_PATH=   ${LOCALBASE}/${QT_PLUGINDIR_REL}/sqldrivers/libqsqlite.so

.  for db in ibase mysql odbc pgsql sqlite2 sqlite3 tds
.    if ${_QT_VERSION:M4*}
sql-${db}_PORT?=    databases/${_QT_RELNAME}-${db}-plugin
.    else
sql-${db}_PORT?=    databases/${_QT_RELNAME}-sqldrivers-${db}
.    endif
sql-${db}_PATH?=    ${LOCALBASE}/${QT_PLUGINDIR_REL}/sqldrivers/libqsql${db:C/^sql//}.so
.  endfor

svg_PORT=           graphics/${_QT_RELNAME}-svg
svg_LIB=            libQt${_QT_LIBVER}Svg.so

testlib_PORT=       devel/${_QT_RELNAME}-testlib
testlib_LIB=        libQt${_QT_LIBVER}Test.so

uic_PORT=           devel/${_QT_RELNAME}-uic
uic_PATH=           ${LOCALBASE}/${QT_BINDIR_REL}/uic

uic3_PORT=          devel/${_QT_RELNAME}-uic3
uic3_PATH=          ${LOCALBASE}/${QT_BINDIR_REL}/uic3

uiplugin_PORT=      x11-toolkits/${_QT_RELNAME}-uiplugin
uiplugin_PATH=      ${LOCALBASE}/${QT_INCDIR_REL}/QtUiPlugin/QtUiPlugin

uitools_PORT=       devel/${_QT_RELNAME}-uitools
uitools_PATH=       ${LOCALBASE}/${QT_LIBDIR_REL}/libQt${_QT_LIBVER}UiTools.a

virtualkeyboard_PORT=   x11-toolkits/${_QT_RELNAME}-virtualkeyboard
virtualkeyboard_PATH=   ${LOCALBASE}/${QT_PLUGINDIR_REL}/platforminputcontexts/libqtvirtualkeyboardplugin.so

webchannel_PORT=    www/${_QT_RELNAME}-webchannel
webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so

webengine_PORT=     www/${_QT_RELNAME}-webengine
webengine_LIB=  libQt${_QT_LIBVER}WebEngine.so

websockets_PORT=    www/${_QT_RELNAME}-websockets
websockets_LIB= libQt${_QT_LIBVER}WebSockets.so

websockets-qml_PORT=    www/${_QT_RELNAME}-websockets-qml
websockets-qml_PATH=    ${LOCALBASE}/${QT_QMLDIR_REL}/QtWebSockets/qmldir

webkit_PORT=        www/${_QT_RELNAME}-webkit
webkit_LIB= libQt${_QT_LIBVER}WebKit.so

widgets_PORT=       x11-toolkits/${_QT_RELNAME}-widgets
widgets_LIB=        libQt${_QT_LIBVER}Widgets.so

x11extras_PORT=     x11/${_QT_RELNAME}-x11extras
x11extras_LIB=      libQt${_QT_LIBVER}X11Extras.so

xml_PORT=           textproc/${_QT_RELNAME}-xml
xml_LIB=            libQt${_QT_LIBVER}Xml.so

xmlpatterns_PORT=   textproc/${_QT_RELNAME}-xmlpatterns
xmlpatterns_LIB=    libQt${_QT_LIBVER}XmlPatterns.so

xmlpatterns-tool_PORT=  textproc/${_QT_RELNAME}-xmlpatterns-tool
xmlpatterns-tool_PATH=  ${LOCALBASE}/${QT_BINDIR_REL}/xmlpatterns

_USE_QT=        ${USE_QT${_QT_VERSION:R:R}}
_USE_QT_ALL+=       ${_USE_QT${_QT_VERSION:R:R}_ONLY}
# Iterate through components deprived of suffix.
.  for component in ${_USE_QT:O:u:C/_.+//}
  # Check that the component is valid.
.    if ${_USE_QT_ALL:M${component}} != ""
   # Skip meta-components (currently none).
.      if defined(${component}_PORT) && (defined(${component}_PATH) || defined(${component}_LIB))
    # Check if a dependency type is explicitly requested.
.        if ${_USE_QT:M${component}_*} != "" && ${_USE_QT:M${component}} == ""
${component}_TYPE=      # empty
.          if ${_USE_QT:M${component}_build} != ""
${component}_TYPE+=     build
.          endif
.          if ${_USE_QT:M${component}_run} != ""
${component}_TYPE+=     run
.          endif
.        endif # ${_USE_QT:M${component}_*} != "" && ${_USE_QT:M${component}} == ""
    # If no dependency type is set, default to full dependency.
.        if !defined(${component}_TYPE)
${component}_TYPE=      build run
.        endif
    # Set real dependencies.
.        if defined(${component}_LIB) && ${${component}_TYPE:Mbuild} && ${${component}_TYPE:Mrun}
LIB_DEPENDS+=           ${${component}_LIB}:${${component}_PORT}
.        else
${component}_PATH?=     ${QT_LIBDIR}/${${component}_LIB}
${component}_DEPENDS=       ${${component}_PATH}:${${component}_PORT}
.          if ${${component}_TYPE:Mbuild} != ""
BUILD_DEPENDS+=         ${${component}_DEPENDS}
.          endif
.          if ${${component}_TYPE:Mrun} != ""
RUN_DEPENDS+=           ${${component}_DEPENDS}
.          endif
.        endif # ${${component}_LIB} && ${${component}_TYPE:Mbuild} && ${${component}_TYPE:Mrun}
.      endif # defined(${component}_PORT) && defined(${component}_PATH)
.    else # ! ${_USE_QT_ALL:M${component}} != ""
IGNORE=             cannot be installed: unknown USE_QT component '${component}'
.    endif # ${_USE_QT_ALL:M${component}} != ""
.  endfor

.if defined(QT_DIST) && ! ${_QT_VERSION:M4*}
. if ${QT_DIST} == "base"
# qtbase requires some tools to be symlinked to the build directory.
_QT_TOOLS=      # empty
.  if ${PORTNAME} != "qmake"
_QT_TOOLS+=     ${QMAKE}
.  endif
.  if ${PORTNAME} != "buildtools"
_QT_TOOLS+=     ${MOC} ${RCC}
.  endif
.  if ${PORTNAME} != "qdoc"
_QT_TOOLS+=     qdoc
.  endif
.  if ${PORTNAME} != "dbus"
_QT_TOOLS+=     qdbuscpp2xml qdbusxml2cpp
.  endif
.  if ${PORTNAME} != "widgets"
_QT_TOOLS+=     ${UIC}
.  endif

# The list of QtBase components that need to be linked into WRKSRC/lib for
# other QtBase ports. See below.
_QT5_BASE=          core dbus gui network sql widgets

pre-configure: qtbase-pre-configure
qtbase-pre-configure:
.  for tool in ${_QT_TOOLS}
    @${TEST} -e ${QT_BINDIR}/${tool:T} && \
        ${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} || \
        ${TRUE}
.  endfor

# The following is a fix for the inplace upgrade problem we faced (see
# QTBUG-40825 and ports bugs 194088, 195105 and 198720) previously,
# which previously was adressed by making sure, that ${LOCALBASE}/lib, which
# would often gets added by pkgconf for the dependencies, was passed after
# ${WRKSRC}/lib.
# * We fix the inplace upgrade problem by moving the Qt5 libraries into
#   ${LOCALBASE}/lib/qt5. Therefore a -L${LOCALBASE}/lib does no harm anymore.
# * However, this means, that the ports belonging to the split up QtBase package
#   now no longer can find their depending QtBase libraries. We fix this by
#   linking these into ${CONFIGURE_WRKSRC}/lib if the given QtBase port depends
#   on them.
.  if ${QT_DIST:Mbase}
.    for basedep in ${_QT5_BASE}
.      if ${USE_QT5:M${basedep}}
    ${LN} -sf ${QT_LIBDIR}/${${basedep}_LIB} ${CONFIGURE_WRKSRC}/lib
.      endif
.    endfor
.  endif

#
# **** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE ****
#
# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out
# certain paths from pkg-config calls (see the explanation in
# devel/qt5/files/patch-configure) as well as for setting
# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for
# ports/194088.
post-patch: qtbase-post-patch
qtbase-post-patch:
    ${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \
        ${WRKSRC}/configure

.  if ${PORTNAME} != "qmake"
_QMAKE=         ${CONFIGURE_WRKSRC}/bin/qmake
.  endif
. endif # ${QT_DIST} == "base"

pre-configure: qt5-pre-configure
qt5-pre-configure:
# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that
# requires tests/auto/cmake to be present, otherwise the configure stage will
# fail.
# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same
# time, we have to disable the check in a cache file (the only way to get this
# value through to the configure script in qtbase).
    ${MKDIR} ${CONFIGURE_WRKSRC}
    ${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache
#
# **** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE ****
#
# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to
# the linker before -L/usr/local/lib. By default, the opposite happens, which
# is a problem when a Qt port is being upgraded, since an existing library
# would end up being picked up instead of those built in ${WRKSRC}/lib. Since
# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the
# latter to get the linker path order right. qmake is smart enough to strip
# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.
# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.
    ${ECHO_CMD} 'QMAKE_LIBDIR_FLAGS = -L${CONFIGURE_WRKSRC}/lib' >> ${CONFIGURE_WRKSRC}/.qmake.cache

post-install: qt-post-install
qt-post-install:
. if ${QT_DEFINES:N-*}
# We can't use SUB_FILES with a shared pkg-deinstall.in.
# We need it to be a script instead of a group of @unexecs, otherwise
# qconfig-modules.h cleanup will be run in pre-deinstall stage, which is
# useless. This will probably be replaced by a Keywords/ script in the future.
    @${SED} -e 's,%%QT_MODNAME%%,${QT_MODNAME},g' \
        -e 's,%%QT_INCDIR%%,${QT_INCDIR},g' \
        ${.CURDIR:H:H}/devel/${_QT_RELNAME}/${FILESDIR:T}/${PKGDEINSTALL:T}.in > \
        ${PKGDEINSTALL}
    @${MKDIR} ${STAGEDIR}${QT_INCDIR}/QtCore/modules
    @${ECHO_CMD} -n \
        > ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
.  for def in ${QT_DEFINES:N-*:O:u:C/=.*$//}
    @${ECHO_CMD} "#if !defined(QT_${def}) && !defined(QT_NO_${def})" \
        >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
    ${ECHO_CMD} "# define QT_${def}" \
        >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
    @${ECHO_CMD} "#endif" \
        >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
    @${ECHO_CMD} \
        >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
.  endfor
    @${ECHO_CMD} "${PREFIX}/${QT_INCDIR_REL}/QtCore/modules/qconfig-${QT_MODNAME}.h" \
        >> ${TMPPLIST}
    @${ECHO_CMD} "@exec echo '#include <QtCore/modules/qconfig-${QT_MODNAME}.h>' >> ${PREFIX}/${QT_INCDIR_REL}/QtCore/qconfig-modules.h" \
        >> ${TMPPLIST}
. endif # ${QT_DEFINES:N-*}
. if ${QT_CONFIG:N-*}
    @${MKDIR} ${STAGEDIR}${QT_MKSPECDIR}/modules
    ${ECHO_CMD} "QT_CONFIG += ${QT_CONFIG:N-*:O:u}" \
        > ${STAGEDIR}${QT_MKSPECDIR}/modules/qt_config_${QT_MODNAME}.pri
    @${ECHO_CMD} "${PREFIX}/${QT_MKSPECDIR_REL}/modules/qt_config_${QT_MODNAME}.pri" \
        >> ${TMPPLIST}
. endif # ${QT_CONFIG:N-*}
.endif # defined(QT_DIST) && ! ${_QT_VERSION:M4*}

.endif # defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)