path: root/UPDATING

This file documents some of the problems you may encounter when upgrading
your ports.  We try our best to minimize these disruptions, but sometimes
they are unavoidable.

You should get into the habit of checking this file for changes each time
you update your ports collection, before attempting any port upgrades.

20101026:
  AFFECTS: users of net/samba35
  AUTHOR: Timur Bakeyev <timur@FreeBSD.org>

  This is the latest stable release of the Samba3 distribution. It has
  been extended with the experimetal support of the NFS4-like ACLs on
  ZFS partitions, thanks to the sysutils/libsunacl library by Edward
  Tomasz Napierala(trasz). This support haven't been tested throrughly,
  so try it on your own risk.

  This port reverted back to the pre- net/samba34 layout of the
  directories and now they are again $PREFIX/etc/samba, /var/run/samba,
  /var/log/samba, /var/db/samba and /var/spool/samba respectively.

  In case, you are upgrading from net/samba34, please rename
  corresponding samba34/ subdirectories into samba/ ones. Upgrades from
  older versions of Samba and fresh installations should be seamless.

20101015:
  AFFECTS: users of devel/llvm-devel who use clang
  AUTHOR: Brooks Davis <brooks@FreeBSD.org>

  The clang portion of devel/llvm-devel has been split out and now
  resides in lang/clang-devel.  If you have devel/llvm-devel installed
  in order to use clang, you will need to install the clang-devel port
  when upgrading.

20101003:
  AFFECTS: users of www/typo3
  AUTHOR: Helmut Schneider <jumper99@gmx.de>

  www/typo3 has been repocopied to www/typo343. If you need to continue with
  the old stable version please run

  # portmaster -o www/typo343 www/typo3
  or
  # portupgrade -o www/typo343 www/typo3

  Please remember to change the path of your config files too.

20101003:
  AFFECTS: users of net-mgmt/kismet
  AUTHOR: bf@FreeBSD.org

  This update includes major changes in how Kismet works and is configured.
  Clients, servers, drones, and configuration files must be updated to work
  with the new version.  Map support has not yet been added.

  See the kismet README for details.

20100929:
  AFFECTS: users of sysutils/zfsnap
  AUTHOR: Aldis Berjoza <aldis@bsdroot.lv>

  Since timestamp format changed you need to use -o option with -d
  option in order to be able to delete old snapshots. Note however that
  you don't need -o when creating new snapshots, unless you want to keep
  using the old timestamp format.

  See http://wiki.bsdroot.lv/zfsnap for more info.

20100927:
  AFFECTS: users of mail/postfix-current
  AUTHOR: ohauer@FreeBSD.org

  Incompatibility with snapshot 20100912
  ======================================
  - If your DNSBL queries have a "secret" in the domain name, you must
    now censor this information from the postscreen(8) SMTP replies.
  - The postscreen "continue" action is now called "ignore". The old
    name is still supported but no longer documented.
  - The postscreen_hangup_action parameter was removed. Postscreen
    now always behaves as if "postscreen_hangup_action = drop".
  - The postscreen_cache_retention_time default was increased from
    1d to 7d, to avoid deleting results from expensive deep SMTP
    protocol tests too quickly.

  Incompatibility with snapshot 20100827
  ======================================
  - The Postfix SMTP client no longer appends the local domain when
    looking up a DNS name without ".".
    Specify "smtp_dns_resolver_options  = res_defnames" to get the old
    behavior, which may produce unexpected results.

20100924:
  AFFECTS: users of x11/nvidia-driver
  AUTHOR: makc@FreeBSD.org

  nvidia-driver does not install vdpau library and headers anymore, they
  are now provided by multimedia/libvdpau port. To avoid conflict, please
  rebuild nvidia-driver port before upgrading your ports and before
  installing multimedia/libvdpau.

20100921:
  AFFECTS: users of p5-Compress-Zlib, p5-IO-Compress-*
  AUTHOR: mm@FreeBSD.org

  The p5-Compress-Zlib, p5-IO-Compress-Base, p5-IO-Compress-Zlib and
  p5-IO-Compress-Bzip2 ports have been replaced by p5-IO-Compress.
  Users of Perl 5.10 and higher do not need to install this module
  because it is already included in the standard perl distribution.

20100920:
  AFFECTS: users of security/stunnel
  AUTHOR: roam@FreeBSD.org

  In stunnel-4.34, the DH support is no longer configurable by the user,
  but always enabled when OpenSSL supports it instead.  This means that
  it will now most probably be enabled on the supported versions of FreeBSD.
  If this leads to problems with old SSL clients, I will look into making
  it configurable at build time again.

20100917:
  AFFECTS: users of sysutils/cdrtools-cjk
  AUTHOR: marius@FreeBSD.org

  sysutils/cdrtools-cjk port has been removed, as the required functionality is
  now available in cdrtools 3.0.0 in the standard sysutils/cdrtools port.
 
20100915:
  AFFECTS: autoconf, automake
  AUTHOR: autotools@FreeBSD.org

  autoconf has been updated from 2.62 to 2.67 -- all ports depending on
  autoconf-2.62 have had their PORTREVISIONs update, so a standard
  port updating method will suffice.

  USE_GETTEXT has been extended to also accept 'build' and 'run' for
  ports which need devel/gettext as a BUILD- or RUN-time dependency only.
  No port should now be directly depending on devel/gettext in Makefiles.

20100915:
  AFFECTS: users of sysutils/cdrtools-cjk
  AUTHOR: marius@FreeBSD.org

  Version 3.00 of sysutils/cdrtools breaks but at the same time also
  obsoletes sysutils/cdrtools-cjk as mkisofs now employs iconv for
  character conversion. Consequently sysutils/cdrtools-cjk is marked
  BROKEN and the use of USE_CDRTOOLS=cjk as well as USE_CDRTOOLS together
  with the WITH_CJK knob left in a broken state until bsd.port.mk is
  updated by portmgr@ accordingly. Once USE_CDRTOOLS is updated to no
  longer refer to sysutils/cdrtools-cjk the latter will be removed.
  Previous users of sysutils/cdrtools-cjk should switch to using
  sysutils/cdrtools instead, which might require not using the WITH_CJK
  knob until said update of bsd.port.mk has happened.

20100915:
  AFFECTS: users of lang/perl5.12
  AUTHOR: skv@FreeBSD.org

  lang/perl5.12 has been updated to 5.12.2.  You should update everything
  that depends on perl.  The easiest way to do that is to use
  "perl-after-upgrade" script supplied with lang/perl5.12.
  Please see its manual page for details.

  If you want to switch to lang/perl5.12 from lang/perl5.{8,10} please
  follow instructions in the entry 20100715 in this file.

20100912:
  AFFECTS: ftp/curl
  AUTHOR: roam@FreeBSD.org

  With version 7.21.1, the cURL port is built with stricter compiler
  checking by default (the -Werror flag is passed to the C compiler,
  making it treat any warnings as fatal errors).  If you experience
  problems building cURL, re-run "make config" in the ftp/curl
  directory and disable the WERROR knob.

20100912:
  AFFECTS: www/tdiary-devel, japanese/tdiary-devel
  AUTHOR: tota@FreeBSD.org

  The stable tDiary ports, www/tdiary and japanese/tdiary, have been
  updated to 3.0.0. The development versions of tDiary have been merged
  from www/tdiary-devel to www/tdiary and from japanese/tdiary-devel to
  japanese/tdiary, respectively.

  If you have been using the www/tdiary-devel or japanese/tdiary-devel,
  you run one of the following commands to upgrade:

  - www/tdiary-devel
    # portmaster -o www/tdiary www/tdiary-devel
    or
    # portupgrade -o www/tdiary www/tdiary-devel

  - japanese/tdiary-devel
    # portmaster -o japanese/tdiary japanese/tdiary-devel
    or
    # portupgrade -o japanese/tdiary japanese/tdiary-devel

  Before upgrading, please read the following for more details:

    http://www.tdiary.org/20100828.html (written in Japanese)

20100907:
  AFFECTS: sysutils/pecl-fileinfo
  AUTHOR: ale@FreeBSD.org

  If you are using php 5.3 (lang/php5) and fileinfo extension, you
  should switch to sysutils/php5-fileinfo port:

    portmaster -o sysutils/php5-fileinfo sysutils/pecl-fileinfo

20100904:
  AFFECTS: net/netcat
  AUTHOR: pgollucci@FreeBSD.org

  Rename nc to netcat to prevent /usr/bin/nc shadowing /usr/local/bin/nc

20100902:
  AFFECTS: users of KDE4
  AUTHOR: kde@FreeBSD.org

  KDE SC ports has been updated to 4.5.1. A number of files were moved
  between packages, manual intervention into update procedure is required:

  # pkg_delete -f kdehier4\* kdelibs-4\* kdebase-4\* kdebase-runtime-4\* kdebase-workspace-4\*
  # rm -rf /usr/local/kde4/share/PolicyKit/policy
  # cd /usr/ports/misc/kdehier4 && make install clean
  # portmaster -a

20100901:
  AFFECTS: users of www/rubygem-rails
  AUTHOR: pgollucci@FreeBSD.org

  Rails has been updated to 3.0.0.  As always, make sure you check the
  changes at http://weblog.rubyonrails.org/.

20100817:
  AFFECTS: users of www/lighttpd
  AUTHOR: mm@FreeBSD.org

  The modules mod_geoip and mod_h264_streaming have been moved into slave
  ports: www/lighttpd-mod_geoip and www/lighttpd-mod_h264_streaming

20100818:
  AFFECTS: users of www/lighttpd
  AUTHOR: mm@FreeBSD.org

  The default lighttpd configuration file locations have changed.
  The main configuration file is now: $PREFIX/etc/lighttpd/lighttpd.conf
  and includes other configuration files from $PREFIX/etc/lighttpd/

  For compatibility with old-style configurations, if the lighttpd_conf 
  variable is not set in /etc/rc.conf, $PREFIX/etc/lighttpd.conf takes
  precedence over $PREFIX/etc/lighttpd/lighttpd.conf

20100815:
  AFFECTS: users of databases/redis and databases/redis-devel
  AUTHOR: osa@FreeBSD.org

  The redis configuration file, redis.conf, have been changed, some options
  removed in newer versions (>=2.0).  In some cases, redis-server with 
  older configuration might does not run at startup.

  If you run into startup problems, re-edit configuration file.

20100813:
  AFFECTS: www/opera
  AUTHOR: dinoex@FreeBSD.org

  If you run opera without gtk or kde4, the browser might crash on shutdown.
  In this case go to about:config and change "Dialog Toolkit" from 0 to 4.

20100811:
  AFFECTS: multimedia/mpeg4ip-libmp4v2
  AUTHOR: makc@FreeBSD.org

  multimedia/mpeg4ip-libmp4v2, which is not maintained upstream, has been
  replaced with new port, multimedia/mp4v2. The shared library version
  has been changed with this update, thus all ports that depends on
  mp4v2 library must be rebuilt:

    portmaster -o multimedia/mp4v2 multimedia/mpeg4ip-libmp4v2
    portmaster -a

20100731:
  AFFECTS: users of devel/ccache
  AUTHOR: ehaupt@FreeBSD.org

  Users upgrading from 2.4 release should clear the old cache directory with:
 
        # ccache --clear

20100730:
  AFFECTS: users of www/neon28 and www/neon29
  AUTHOR: mezz@FreeBSD.org

  Makes neon29 our default neon library in the ports tree. The www/neon28
  has been removed and www/neon29's shared library version has been changed.
  You will have to rebuild all ports that depend on www/neon29. Do this:

  Portmaster users:
    portmaster -o www/neon29 www/neon28
    portmaster -r neon29-

  Portupgrade user:
    env DISABLE_CONFLICTS=1 portupgrade -o www/neon29 -f neon28-\*
    pkgdb -Ff
    portupgrade -rf neon29-\*

20100728:
  AFFECTS: users of textproc/nltk
  AUTHOR: clsung@FreeBSD.org

  Nltk has been upgraded to 2.0b8 which depends on devel/py-yaml now.
  You need to deinstall nltk before upgrading, since the previous port
  will delete files installed from py-yaml during its deinstall phase.

  Use, for example:

    # pkg_delete nltk-2.0b7,1
    # portsnap fetch update
    # cd /usr/ports/textproc/nltk/
    # make install clean

20100727:
  AFFECTS: users of security/libgcrypt
  AUTHOR: wxs@FreeBSD.org

  libgcrypt has been upgraded to 1.4.6 which has a shared library version
  bump.  You need to reinstall all ports that depend on it.  Use something
  like this:

    portupgrade -rf libgcrypt
    portmaster -r libgcrypt

20100722:
  AFFECTS: users of net/rabbitmq
  AUTHOR: Phillip <pneumann@gmail.com>

  The database schema and the format in which persistent messages are
  stored have both changed since the last release (1.7.2). When
  starting, the RabbitMQ server will detect the existence of an old
  database and will move it to a backup location, before creating a
  fresh, empty database, and will log a warning.

20100715:
  AFFECTS: users of lang/perl*
  AUTHOR: skv@FreeBSD.org

  lang/perl5.12 is out. If you want to switch to it from, for example
  lang/perl5.10, that is:

  Portupgrade users:
    0) Fix pkgdb.db (for safety):
    pkgdb -Ff

    1) Reinstall new version of Perl (5.12):
    env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.12 -f perl-5.10.\*

    2) Reinstall everything that depends on Perl:
    portupgrade -fr perl

  Portmaster users:
    portmaster -o lang/perl5.12 lang/perl5.10

    Conservative:
    portmaster p5-

    Comprehensive (but perhaps overkill):
    portmaster -r perl-

  Note: If the "perl-" glob matches  more than one port you will need to
    specify the name of the Perl directory in /var/db/pkg explicitly.

20100626:
  AFFECTS: users of japanese/ibus-mozc
  AUTHOR: daichi@FreeBSD.org

  The japanese/ibus-mozc port has been updated to version 0.11.383.102, 
  and separated into 5 ports to cope with upcoming new port 
  japanese/scim-mozc.

    o japanese/mozc-server
    o japanese/mozc-tool
    o japanese/mozc-additions
    o japanese/ibus-mozc
    o devel/py-gyp-devel

  You can not upgrade with portupgrade or portmaster. To upgrade, you 
  must deinstall japanese/ibus-mozc first and then install the new 
  japanese/ibus-mozc.

  For example:

    # pkg_delete ja-ibus-mozc-0.11.365.102_1
    # portsnap fetch update
    # cd /usr/ports/japanese/ibus-mozc/
    # make install clean

20100617:
  AFFECTS: users of security/{dirmngr|gnupg}
  AUTHOR: dougb@FreeBSD.org

  The security/libassuan port has been updated to version 2.0.0, and
  the applications listed above have been updated to use it as of versions
  1.1.0 and 2.0.15 respectively.  If you HAVE NOT updated your libassuan
  port as described in the 20100613 entry, you can simply update all 3
  ports together (libassuan, dirmngr if installed, and gnupg) using your
  normal upgrade path.  If you HAVE updated to libassuan-1, then you need
  to do the following before upgrading dirmngr and gnupg.

  If you use portupgrade:

    portupgrade -f -o security/libassuan security/libassuan-1

  If you use portmaster:

    portmaster -o security/libassuan libassuan-1

  If you use neither:

    pkg_delete -f libassuan*

  Please note, libassuan version 2.0.0 is now a shared library, so unlike
  the previous version it is now a runtime dependency and cannot be deleted
  after you are done building dirmngr and/or gnupg.

20100613:
  AFFECTS: users of deskutils/kdepim4, and  security/{gpa|opensc}
  AUTHOR: dougb@FreeBSD.org

  The security/libassuan port has been updated to version 2.0.0, however,
  the applications listed above are not yet compatible with it.  Therefore
  security/libassuan-1 has been created until they can be updated, and the
  ports listed above have been updated to depend on it.  You must first
  replace your existing libassuan with version 1 in the new location, then
  you can update the ports listed above normally.

  If you use portupgrade:

    portupgrade -f -o security/libassuan-1 security/libassuan

  If you use portmaster:

    portmaster -o security/libassuan-1 libassuan

  If you use neither:

    pkg_delete -f libassuan*

20100609:
  AFFECTS: users of audio/libogg and audio/libao
  AUTHOR: naddy@FreeBSD.org

  There are new versions of libogg (1.2.0) and libao (1.0.0) and the
  shared library versions have been bumped (ogg.6 to ogg.7, ao.3 to ao.4).

  All ports that have an identifiable direct dependency on these libraries
  have had their PORTREVISIONs bumped.  However, some ports that pull in
  the libraries indirectly may continue to look for the old versions.  To
  ensure that all are updated, perform this step:

  If you use portupgrade:

    portupgrade -rf libogg libao

  If you use portmaster:

    portmaster -r libogg libao

20100605:
  AFFECTS: users of multimedia/gstreamer-plugins-good and
       multimedia/gstreamer-plugins-bad
  AUTHOR: kwm@FreeBSD.org

  Certain plugins were moved from the -bad port to the -good port.  Please
  follow instructions below before proceeding with normal update steps:

  If you use portmaster:

    portmaster gstreamer-plugins-bad

  If you use portupgrade:

    portupgrade -R multimedia/gstreamer-plugins-bad

20100602:
  AFFECTS: users of lang/mono
  AUTHOR: romain@FreeBSD.org

  Starting with Mono 2.6, the Moonlight compiler and assemblies are not
  installed by the lang/mono port anymore.  They are however provided by
  the multimedia/moonlight port.

  If you are doing some Silverlight development, install multimedia/moonlight
  after updating lang/mono.

20100530:
  AFFECTS: users of devel/gettext (i.e.: YOU)
  AUTHOR: ade@FreeBSD.org

  Another version of gettext (0.18), and another shared library version
  bump (from intl.8 to intl.9), so:

  All ports that have an identifiable known direct dependency on gettext
  have had their PORTREVISIONs bumped.  If after upgrading:

    # portupgrade -rf gettext
    # portmaster -w -r gettext

  The upgrade of devel/gobject-introspection may fail because it is looking
  for libintl.so.8.  In this case, do the following:

    # cd /usr/ports/devel/gobject-introspection
    # make clean
    # make deinstall
    # make install clean

  Then continue your upgrade procedure normally.

  If there are still ports on your system that are looking for libintl.so.8
  (either in ${LOCALBASE}/lib/compat/pkg, or non-existent), _please_ file
  a PR so that a correct direct dependency can be added.

  Once you are satisfied that no ports still depend on the old versions (such
  as libgettextpo.so.4 and libintl.so.8) you can safely delete them from the
  ${LOCALBASE}/lib/compat/pkg directory if they are present there.

20100524:
  AFFECTS: users of devel/darcs, ports-mgmt/porte, textproc/pandoc,
       x11/xmobar, x11-wm/xmonad, x11-wm/xmonad-contrib
  AUTHOR: pgj@FreeBSD.org

  The following ports have been renamed to improve consistency among Haskell
  Cabal ports:

    - devel/darcs           -> devel/hs-darcs
    - ports-mgmt/porte      -> ports-mgmt/hs-porte
    - textproc/pandoc       -> textproc/hs-pandoc
    - x11/xmobar            -> x11/hs-xmobar
    - x11-wm/xmonad         -> x11-wm/hs-xmonad
    - x11-wm/xmonad-contrib -> x11-wm/hs-xmonad-contrib

  Please follow these steps below to update Haskell ports that you have
  installed:

  1) Reinstall the renamed Haskell port dependencies (see previous entry).
     Note that this will possibly require that you remove the affected leaf
     (aforementioned) ports as well;

  2) Reinstall the renamed application(s) you use.

20100524:
  AFFECTS: users of hs-* ports
  AUTHOR: pgj@FreeBSD.org

  The following Haskell ports have been renamed in order to bring them in
  sync with the naming scheme used at HackageDB.  Please follow these steps
  below to update your installation:

  1) Delete the following ports (if you have any of them installed):

     - hs-zip-archive-ghc
     - hs-binary-ghc
     - hs-language-c-ghc
     - hs-lazysmallcheck-c-ghc
     - hs-pcre-light-ghc
     - hs-utf8-string-ghc
     - hs-HGL-ghc
     - hs-digest-ghc
     - hs-haxml
     - hs-highlighting-kate-ghc
     - hs-polyparse-ghc
     - hs-x11-ghc
     - hs-x11-xft-ghc
     - hs-opengl-ghc
     - hs-OpenGLRaw-ghc
     - hs-OpenGLURaw-ghc
     - hs-glut-ghc

  2) Rebuild the renamed ports and all ports that depend on them.

20100518:
  AFFECTS: users of devel/pylint
  AUTHOR: mva@FreeBSD.org

  The pylint user configuration files have been changed slightly in newer
  versions (>=0.20.0).  In some cases, older configurations might crash
  pylint at startup.

  If you run into startup problems, make sure you remove the .pylintrc
  configuration settings and the .pylint.d directory from your home
  directory:

    $ rm ~/.pylintrc
    $ rm -rf ~/.pylint.d

20100518:
  AFFECTS: users of devel/apr0, devel/apr1, www/apache20, www/apache22
  AUTHOR: pgollucci@FreeBSD.org

  devel/apr port has been renamed to devel/apr1.

  WITH_APR_FROM_PORTS=yes for www/apache22 has been dissolved and may be
  removed from your configuration files; devel/apr1 is always used now.

  Please manually delete apache-2.\* if installed _before_ updating using
  either portmaster or portupgrade:

    pkg_delete -f apache-2.\*

  Then, if you use portmaster:

    portmaster -o devel/apr1 devel/apr

  If you use portupgrade:

    portupgrade -f -o devel/apr1 devel/apr

  Finally, reinstall Apache port if you deleted it earlier and update ports as
  usual (`XX' below is either 20 or 22):

    portinstall www/apacheXX

20100512:
  AFFECTS: users of www/apache20
  AUTHOR: pgollucci@FreeBSD.org

  The rc.d script has been renamed:

    apache2.sh -> apache2

  You'll need to update any crons wrappers, etc. for the new paths.

20100511:
  AFFECTS: users of KDE SC 4
  AUTHOR: kde@FreeBSD.org

  KDE SC ports have been updated from 4.3.5 to 4.4.3. A number of libraries
  was moved between packages. The recommended update procedure is to delete
  kdelibs-experimental*, kdebase-4*, kdebase-workspace-4*,
  kdebase-runtime-4*, kdepim-4*, kdepim-runtime-4*, and then update ports as
  usual and install desired KDE4 ports:

    # pkg_delete -f kdebase-\*4\* kdepim-\*4\* kdelibs-experimental-\*4\*
    # portmaster -a (or portupgrade -aR)

  In order to enabled Nepomuk semantic desktop search you have to install
  databases/virtuoso (you don't need to manually configure or run virtuoso
  server).

20100511:
  AFFECTS: users of textproc/redland RDF engine
  AUTHOR: kde@FreeBSD.org

  Redland RDF engine has been split into redland itself and rasqal engine.
  The recommended update procedure is to delete redland, then update ports
  as usual and install desired RDF ports:

    # pkg_delete -f redland-\*
    # portmaster raptor (or portupgrade -r raptor)

20100511:
  AFFECTS: users of multimedia/qt4-phonon, multimedia/qt4-phonon-gst,
       multimedia/phonon, and multimedia/phonon-gstreamer
  AUTHOR: kde@FreeBSD.org

  WITH_QT_PHONON global knob has been introduced to allow selection between
  multimedia/qt4-phonon* ports (a bit outdated Phonon, which is shipped with
  Qt4) and multimedia/phonon* ports.  Since KDE SC 4.4 requires fresh Phonon,
  multimedia/phonon* ports are installed by default.

  If you don't use KDE, you may set WITH_QT_PHONON=yes in /etc/make.conf
  and continue to use Qt4 Phonon implementation ports.

  If you want to use KDE SC 4.4 (or if you want the latest Phonon), do not
  define WITH_QT_PHONON, delete multimedia/qt4-phonon* ports, and install
  multimedia/phonon*:

  If you use portmaster:

    portmaster -o multimedia/phonon multimedia/qt4-phonon
    portmaster -o multimedia/phonon-gstreamer multimedia/qt4-phonon-gst

  If you use portupgrade:

    portupgrade -f -o multimedia/phonon multimedia/qt4-phonon
    portupgrade -f -o multimedia/phonon-gstreamer multimedia/qt4-phonon-gst

20100510:
  AFFECTS: users of security/gnome-keyring
  AUTHOR: kwm@FreeBSD.org

  libgnome-keyring was split out of the gnome-keyring package.  Perform the
  following before doing your normal upgrade steps:

    pkg_delete -f "gnome-keyring-*"
    portmaster security/gnome-keyring
  or
    pkgdb -Ff
    portupgrade -R -x gnome-keyring -x libgnome-keyring gnome-keyring
    pkg_deinstall -fO gnome-keyring
    portinstall security/gnome-keyring

20100506:
  AFFECTS: users of mail/nullmailer on FreeBSD 6.X
  AUTHOR: glarkin@FreeBSD.org

  The nullmailer port was recently updated with an rc.d script to correctly
  daemonize nullmailer-send with daemon(8).  On FreeBSD 6.X, daemon(8) does
  not support "[-u user]" command-line switch, causing the nullmailer rc.d
  script failure to start nullmailer-send.

  Support for "[-u user]" command-line switch was recently MFC'd to 6-STABLE
 (http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/146266).  FreeBSD 6.X users
  should patch and install daemon(8) by one of the methods described below.

  If /usr/src is not yet populated, csup the 6-STABLE sources and run these
  commands:

    cd /usr/src/usr.sbin/daemon
    make install
    /usr/local/etc/rc.d/nullmailer start

  If /usr/src is already populated with sources from a previous 6.X release,
  use these commands:

    cd /usr/src/usr.sbin/daemon
    fetch 'http://people.freebsd.org/~glarkin/pr-links/daemon/patch-daemon.c'
    fetch 'http://people.freebsd.org/~glarkin/pr-links/daemon/patch-daemon.8'
    patch -p0 daemon.c < patch-daemon.c
    patch -p0 daemon.8 < patch-daemon.8
    make install
    /usr/local/etc/rc.d/nullmailer start

20100502:
  AFFECTS: users of www/squid*
  AUTHOR: miwi@FreeBSD.org

  Starting with squid* the directory containing the default cache and log
  directory was changed from $PREFIX/squid/ to /var/squid/.

  The default values for the following Squid configuration parameters have
  changed as shown below:

  cache_log from $PREFIX/squid/logs/cache.log to /var/squid/logs/cache.log
  cache_store_log from $PREFIX/squid/logs/store.log to /var/squid/logs/store.log
  pid_filename from $PREFIX/squid/logs/squid.pid to /var/squid/logs/squid.pid
  coredump_dir from $PREFIX/squid/cache to /var/squid/cache

  Please check whether you need to define any of these variables in your
  squid.conf to the old defaults explicitly before updating, especially if
  you have set up automated log processing or automated log rotation.  If you
  define pid_filename in your squid.conf, you should also set squid_pidfile
  to the same value in /etc/rc.conf, cf. $PREFIX/etc/rc.d/squid.

20100419:
  AFFECTS: users of math/libgmp4
  AUTHOR: ale@FreeBSD.org

  The default gmp version in FreeBSD is now 5.0.x.  The port directory
  changed from math/libgmp4 to math/gmp.  An entry has been added to MOVED
  and all depending ports revisions have been bumped, so the update should
  be handled correctly by usual port management tools such as portupgrade.

  Portmaster users, please do the following before upgrading ports that
  depend on gmp:

    portmaster -o math/gmp math/libgmp4

20100409:
  AFFECTS: users of lang/php5
  AUTHOR: ale@FreeBSD.org

  As of PHP 5.3, a few extensions were removed from or included into the core
  PHP5 package.  Follow the steps below to update your installation.

  1) Delete the following packages (if installed):

     - php5-dbase
     - php5-ncurses
     - php5-pcre
     - php5-spl
     - php5-ming
     - php5-mhash

  2) Rebuild lang/php5 and all ports that depend on it.

20100403:
  AFFECTS: users of net/dgd
  AUTHOR: glewis@FreeBSD.org

  The kernel library has been separated from the main net/dgd port into its
  own net/dgd-kernel port so that all libraries are on an equal footing.
  This also reflects the split of the kernel library out from the main DGD
  distribution.

  If you wish to continue to use the kernel library you'll need to install
  net/dgd-kernel after updating to dgd-1.4.1_2.

20100330:
  AFFECTS: users of gstreamer-plugins-bad and gstreamer-plugins-good
  AUTHOR: kwm@FreeBSD.org

  Plugin moved from the -bad port to the -good port.  Please follow the
  instructions below before proceeding with normal update steps.

  If you use portmaster:

    portmaster gstreamer-plugins-bad

  If you use portupgrade:

    portupgrade -R multimedia/gstreamer-plugins-bad

20100328:
  AFFECTS: users of graphics/png
  AUTHOR: dinoex@FreeBSD.org

  The PNG library has been updated to version 1.4.1.  Please rebuild all
  ports that depend on it.

  If you use portmaster: make sure you update to portmaster version 2.20 or
  newer, then do:

    portmaster -r png-

  If you use portupgrade:

    portupgrade -fr graphics/png

20100221:
  AFFECTS: users of rblibtorrent-devel
  AUTHOR: dougb@FreeBSD.org

  The port name has changed to libtorrent-rasterbar-14.

  If you use portmaster:

    portmaster -o net-p2p/libtorrent-rasterbar-14 net-p2p/rblibtorrent-devel

  If you use portupgrade:

    portupgrade -o net-p2p/libtorrent-rasterbar-14 net-p2p/rblibtorrent-devel

20100216:
  AFFECTS: users of sysutils/bacula-server, sysutils/bacula-client
  AUTHOR: dvl@FreeBSD.org

  Bacula 5.x uses new shared objects which conflict with the shared objects
  from previous versions.  You should delete all existing Bacula packages
  from your system before compiling Bacula 5.x, otherwise you'll encounter
  compilation errors.

    /usr/local/etc/rc.d/bacula-dir stop
    /usr/local/etc/rc.d/bacula-sd stop
    /usr/local/etc/rc.d/bacula-fd stop
    pkg_delete 'bacula-*'

  After upgrading, remember to run the database upgrade script supplied
  with the port.

20100214:
  AFFECTS: users of japanese/roundcube
  AUTHOR: nork@FreeBSD.org

  If you switch mail/roundcube to japanese/roundcube, please re-check
  configuration files like ${PREFIX}/www/roundcube/config/main.inc.php.
  At least, please add following settings:

  $rcmail_config['message_charset_languages'] = array('en_US' => 'ISO-8859-1', ...
  $rcmail_config['transfer_encoding_languages'] = array('en_US' => 'quoted-printable', ...

  See also: ${PREFIX}/www/roundcube/config/main.inc.php.dist

20100207:
  AFFECTS: users of www/firefox
  AUTHOR: beat@FreeBSD.org

  The www/firefox port has been updated to 3.6.  From now on www/firefox
  will contain the most recent version of Firefox.  Older but still
  supported releases will be available in www/firefox3 and www/firefox35.

  In order to update to Firefox 3.6 please delete your older installed
  version of Firefox first and install www/firefox afterwards.  Please
  make sure all your addons are compatible with Firefox 3.6 and backup
  your ~/.mozilla directory prior to the first launch of Firefox 3.6.

  The Java plugin will not work with Firefox 3.6.  If you need Java in
  your browser, please use www/firefox35 instead.

20100207:
  AFFECTS: users of Mesa3D libraries and x11-drivers/xf86-video-nouveau
  AUTHOR: nork@FreeBSD.org

  If you want to use Mesa3D 7.6.1 and libdrm 2.4.17 rather than 7.4.4
  and 2.4.12, you must define WITHOUT_NOUVEAU global macro, at least,
  enabled on graphics/libGL*, graphics/libglut, graphics/dri,
  graphics/mesa-demos, and graphics/libdrm.  And please give up using
  x11-drivers/xf86-video-nouveau.

  At this time, I cannot enable latest Mesa3D and libdrm, because they
  break xf86-video-nouveau.  But old (current?) Mesa3D and libdrm do not
  break any drivers.

  AMD Radeon HD 2xxx/3xxx/4xxx users: If you use AMD Radeon HD [234]xxx
  series, please define WITHOUT_NOUVEAU global macro.  You can then use
  OpenGL Hardware Accelerator feature on these series.

20100206:
  AFFECTS: users of net/samba4-devel
  AUTHOR: timur@FreeBSD.org

  Default configuration file was moved to ${LOCALBASE}/etc/smb4.conf to
  avoid conflicts with the installed net/samba3?.  Also, userland utils
  are not installed by default, which should also help with the parallel
  setup of Samba3 and Samba4.

20100205:
  AFFECTS: users of Qt 3 and KDE 3
  AUTHOR: itetcu@FreeBSD.org

  When building qt33 and kdelibs3 (at least), while they are installed,
  because of -L/usr/local/lib being passed too soon, the currently installed
  libraries are used instead of the ones from the build.  This makes the
  build fail if you updated any of the libraries these Qt/KDE libraries are
  linked against (e.g. libjpeg).

  For the moment the workaround, when you get to this, is to move the old lib
  out of the way, e.g.:

    mv /usr/local/lib/libqt-mt.so /usr/local/lib/libqt-mt.so.old && \
    cd /usr/ports/x11-toolkits/qt33/ && make && \
    mv /usr/local/lib/libqt-mt.so.old /usr/local/lib/libqt-mt.so && \
    portmaster -C x11-toolkits/qt33 (or portupgrade -w qt-33\*) ...

20100205:
  AFFECTS: users of lang/perl*
  AUTHOR: skv@FreeBSD.org

  Default version of Perl was bumped to 5.10.

  If you already have lang/perl5.8 installed, and want to switch to
  lang/perl5.10 please follow instructions in the entry 20090328 in this
  file.

20100205:
  AFFECTS: users of net/samba34
  AUTHOR: timur@FreeBSD.org

  This port was developed with the generous help of Florent Brodin.

  The default passdb backend has been changed to `tdbsam'! That breaks
  existing setups using the `smbpasswd' backend without explicit
  declaration! Please use `passdb backend = smbpasswd' if you would like
  to stick to the `smbpasswd' backend or convert your smbpasswd entries
  using e.g. `pdbedit -i smbpasswd -e tdbsam'.

  The `tdbsam' backend is much more flexible concerning per user
  settings like `profile path' or `home directory' and there are some
  commands which do not work with the `smbpasswd' backend at all.

20100130:
  AFFECTS: users of audio/sdl_mixer and graphics/sdl_image
  AUTHOR: mva@FreeBSD.org

  The SDL_mixer and SDL_image libraries have new shared library versions.
  Please rebuild all ports that depend on them.

  If you use portmaster:

    portmaster -r sdl_mixer-
    portmaster -r sdl_image-

  If you use portupgrade:

    portupgrade -fr audio/sdl_mixer
    portupgrade -fr graphics/sdl_image

20100125:
  AFFECTS: users of audio/openal and graphics/openal-soft
  AUTHOR: mva@FreeBSD.org

  The default OpenAL implementation was switched to audio/openal-soft.
  To update all ports correctly, the following steps have to be performed.

    pkg_delete -f openal-\*

  If you use portmaster:

    portmaster -o audio/openal-soft audio/openal
    portmaster -r audio/openal-soft

  If you use portupgrade:

    portupgrade -ro audio/openal audio/openal-soft

  If you want to stick with audio/openal, please specify the following ports
  make flag within /etc/make.conf (or an appropriate configuration file for
  your ports):

    WANT_OPENAL=si

20100122:
  AFFECTS: users of sysutils/policykit and sysutils/polkit
  AUTHOR: gnome@FreeBSD.org

  Due to a recent change in sysutils/policykit, both sysutils/policykit,
  and sysutils/polkit need to be rebuilt, but in a certain order.  First,
  upgrade sysutils/policykit to 0.9_6.  Then, force rebuild and reinstall
  of sysutils/polkit.  If you do not do this, applications which depend
  on polkitd will fail.

20100113:
  AFFECTS: users of emulators/virtualbox
  AUTHOR: beat@FreeBSD.org

  Port has been renamed to emulators/virtualbox-ose to reflect that we are
  using the OSE version.  A separate port for the kernel modules has been
  created: emulators/virtualbox-ose-kmod.

  Please see http://wiki.freebsd.org/VirtualBox for update instructions.

20100107:
  AFFECTS: users of security/openvpn*
  AUTHOR: mandree@FreeBSD.org

  security/openvpn has been moved to security/openvpn20 and upgraded to 2.0.9.
  security/openvpn has been upgraded to 2.1.1, and security/openvpn-devel has
  been removed.

  Regular upgrades of the security/openvpn port should succeed without
  manual intervention, but if you want to stick to openvpn 2.0 or if you
  had been using openvpn-devel, manual intervention is needed, as
  follows:

  If you'd been using the security/openvpn-devel port, please use one of
  these commands for upgrading:

    portmaster -m-DDISABLE_CONFLICTS -o security/openvpn security/openvpn-devel

    portupgrade -m-DDISABLE_CONFLICTS -o security/openvpn security/openvpn-devel

  If you want to stick to openvpn 2.0, please use one of these two
  upgrade commands:

    portmaster -m-DDISABLE_CONFLICTS -o security/openvpn20 security/openvpn

    portupgrade -m-DDISABLE_CONFLICTS -o security/openvpn20 security/openvpn

20100106:
  AFFECTS: users of devel/websvn
  AUTHOR: miwi@FreeBSD.org

  The default install directory for websvn has changed from
  ${PREFIX}/www/data/websvn to ${PREFIX}/www/websvn.

  If you are updating from a previous version, to preserve your settings
  and data, please do the following:

    mv /usr/local/www/data/websvn /usr/local/www

  Then update as usual.

20091227:
  AFFECTS: users of sysutils/grok
  AUTHOR: Wesley Shields <wxs@FreeBSD.org>

  The sysutils/grok port has been completely re-written. Configuration files
  will need to be reviewed. Also, the RC script has been removed until it can
  be made to work with the new version.

20091226:
  AFFECTS: users of net-mgmt/ndoutils
  AUTHOR: pgollucci@FreeBSD.org

  When upgrading you'll need to run ./upgradedb; see UPGRADING file.

20091214:
  AFFECTS: users of net/grdc
  AUTHOR: avl@FreeBSD.org

  Grdc has been renamed to Remmina upstream, and the port was also renamed
  to reflect this.  After installing remmina port you will need to download
  the ``grdc2remmina.sh'' script and run it as your normal user(s) that
  have ~/.grdc.  The script will only create ~/.remmina directory and move
  grdc config files to the new path; it does not affect anything else.

    $ fetch http://people.freebsd.org/~avl/script/grdc2remmina.sh
    $ sh grdc2remmina.sh

20091213:
  AFFECTS: users of net-mgmt/zabbix, net-mgmt/zabbix-agent
  AUTHOR: Jim Riggs <ports@christianserving.org>

  In order to simplify configuration and better separate the different
  components of Zabbix, the former zabbix port has been split into three:
  zabbix-server, zabbix-proxy, and zabbix-frontend.  Each component has
  distinct functionality and may be installed independently on separate
  systems.  The existing zabbix-agent port remains.

  Additionally, the new zabbix-frontend port now (correctly) installs the
  PHP frontend in PREFIX/www/zabbix.  The old zabbix port installed the
  files in PREFIX/share/zabbix/php.  Web server configurations must be
  updated accordingly.

  Finally, Zabbix has been updated to version 1.8.  Not everyone may be
  able to upgrade from version 1.6 immediately, though, so 1.6.8 versions
  of the ports are also available as zabbix16-server, zabbix16-proxy,
  zabbix16-agent, and zabbix16-frontend.

20091206:
  AFFECTS: users of emulators/qemu
  AUTHOR: nox@FreeBSD.org

  The port has been updated to 0.11.1, which no longer enables kqemu by
  default (if built with KQEMU knob on), now you also have to explicitly
  pass -enable-kqemu (or -kernel-kqemu as with the previous versions)
  if you want to use it.  Also note the 0.11 stable branch is the last
  qemu branch that still supports kqemu, so if you depend on reasonably
  fast emulation on FreeBSD you should start looking for alternatives
  some time soon.  (VirtualBox?)

20091120:
  AFFECTS: users of mail/postfixadmin
  AUTHOR: Terry Sposato <tabmow@freenode.net>

  Due to a bug in the previous postfixadmin port, existing users need to
  backup their config.inc.php before they upgrade to postfixadmin-2.3 or
  later and put it in place after the upgrade is complete.

20091120:
  AFFECTS: users of security/f-prot
  AUTHOR: Tim Bishop <tdb@FreeBSD.org>

  The main f-prot command is now named fpscan.  Virus definitions are
  updated using the fpupdate command.  fpupdate will automatically run
  from periodic every day.  To disable set the following option in
  /etc/periodic.conf:

    fpupdate_enable="NO"

  The f-prot port now only works on i386.

20091118:
  AFFECTS: users of java/jboss5
  AUTHOR: Jonathan Chen <jonc@chen.org.nz>

  The JBoss directory structure has been reorganised to follow hier(7)
  guidelines more closely; in particular, transient and deployment files
  were moved to /var/jboss5, thus allowing /usr to be read-only.

20091118:
  AFFECTS: users of www/redmine
  AUTHOR: Bernhard Froehlich <decke@bluelife.at>

  After the upgrade you need to generate a session secret before restarting
  the application.  This is to protect you from cross-site request forgery.
  From your Redmine directory, simply run the following command once:

    # rake config/initializers/session_store.rb

  then upgrade as usual:

    # rake db:migrate RAILS_ENV=production

20091114:
  AFFECTS: users of emulators/win4bsd
  AUTHOR: Mario S F Ferreira <lioux@FreeBSD.org>

  The new port now depends on emulators/kqemu-kmod instead of installing
  its own version.  Therefore, you should make sure that no other kqemu.ko
  modules are installed:

    # pkg_delete -f win4bsd\*
    # rm -f /boot/kernel/kqemu.ko
    # pkg_delete -f kqemu-kmod\*
    # portinstall emulators/win4bsd

  Do not forget to enable kqemu on rc.conf since win4bsd will not work
  without it.

20091018:
  AFFECTS: users of databases/mysql54-server
  AUTHOR: Alex Dupre <ale@FreeBSD.org>

  After the upgrade the server may fail to start due to changes in the
  default values of innodb_log_files_in_group and innodb_log_file_size,
  which differ from those in earlier 5.4 releases.

  You should discard the old InnoDB log files and let MySQL 5.4.3 create
  new ones.  It is necessary to shut down your current server cleanly so
  that no outstanding transaction information remains in the log.

  See here: http://dev.mysql.com/doc/refman/5.4/en/news-5-4-3.html

20091014:
  AFFECTS: users of mail/heirloom-mailx
  AUTHOR: Alexander Logvinov <avl@FreeBSD.org>

  Since SourceForge switched to the new File Release System,
  mail/heirloom-mailx has wrong package name.  All users who have
  mail/heirloom-mailx installed after 22 August 2009 should run the
  following commands:

    # pkg_delete "\-mailx-12.4_1"
  or
    # rm -r /var/db/pkg/-mailx-12.4_1

    # rm -r /var/db/ports/-mailx
    # cd /usr/ports/mail/heirloom-mailx && make install clean

20090921:
  AFFECTS: users of archivers/lzmautils, archivers/lzmautils-devel
  AUTHOR: Christian Weisgerber <naddy@FreeBSD.org>

  The XZ Utils distribution has superseded LZMA Utils, so the xz port has
  been added and the lzmautils ports have been removed.  To perform the
  move, run one of the following commands:

  If using portupgrade:

    # portupgrade -o archivers/xz lzmautils\*

  If using portmaster:

    # portmaster -o archivers/xz archivers/lzmautils
  or
    # portmaster -o archivers/xz archivers/lzmautils-devel

  as applicable.

20090919:
  AFFECTS: users of mail/postfix-postfwd
  AUTHOR: Sahil Tandon <sahil@tandon.net>

  The recipient rate-limiting feature is now called via rcpt() command
  instead of with mrcpt() as in previous versions.  Make sure to update
  your postfwd.conf if you use this feature.

20090917:
  AFFECTS: users of www/epiphany, x11/yelp, graphics/librsvg2,
       x11/toolkits/py-gnome-extras, and www/epiphany-extensions
  AUTHOR: gnome@FreeBSD.org

  The default Gecko provider has been changed from www/firefox to
  www/libxul.  Firefox 2.x is now marked FORBIDDEN for security reasons,
  and libxul is new, stable, and preferred Gecko provider.  Libxul uses
  the same Gecko engine as Firefox 3.0.x.

  Some ports may fail to upgrade or run when both www/firefox and libxul
  are installed on the same system.  To make sure everything runs smoothly,
  uninstall www/firefox, then install libxul, then upgrade the affected
  ports.

20090915:
  AFFECTS: users of sysutils/gosa
  AUTHOR: Denis Shaposhnikov <dsh@wizard.volgograd.ru>

  Please read the following:

    https://oss.gonicus.de/labs/gosa/wiki/DocumentationInstallingUpdatingGOsa

  before upgrading this port.  And don't forget to check your slapd.conf
  because gosa scheme files were changed.  Should you have any problems
  during LDAP migration step, try to restart your PHP process.

20090913:
  AFFECTS: users of www/ikiwiki
  AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>

  In order to fix a performance bug, all wikis need to be rebuilt on
  upgrade to version 3.1415926.

20090912:
  AFFECTS: users of ports that have set USE_FORTRAN=yes
  AUTHOR: gerald@FreeBSD.org

  Ports that are built using the Fortran frontend of GCC (aka gfortran)
  will now use lang/gcc44 as the default compiler.

20090911:
  AFFECTS: users of lang/perl5.10
  AUTHOR: skv@FreeBSD.org

  lang/perl5.10 has been updated to 5.10.1.  You should update everything
  that depends on perl.  The easiest way to do that is to use
  "perl-after-upgrade" script supplied with lang/perl5.10.  Please see its
  manual page for details.

  If you want to switch to lang/perl5.10 from lang/perl5.8 please follow
  instructions in the entry 20090328 in this file.

20090910:
  AFFECTS: users of www/rubygem-rails
  AUTHOR: pgollucci@FreeBSD.org

  Rails has been updated to 2.3.4.  As always, make sure you check the
  changes at http://weblog.rubyonrails.org/.

20090909:
  AFFECTS: users of gstreamer-plugins-bad gstreamer-plugins-good
  AUTHOR: kwm@FreeBSD.org

  Due to the move of several plugins from gstreamer-plugins-bad to
  gstreamer-plugins-good, it is necessary to update gstreamer-plugins-bad
  first:

    portupgrade -R gstreamer-plugins-bad

  or, using portmaster:

    portmaster gstreamer-plugins-bad

  After this step, the normal upgrade procedure can be used.

20090831:
  AFFECTS: users of emulators/linux-systemsimcell
  AUTHOR: stast@bsdportal.ru

  The port emulators/linux-systemsimcell has been updated to 3.1.25.
  Systemsimcell emulator now has a new dependency: x11-toolkits/linux-f10-blt.
  So you need to switch to linux-f10 ports in order to use 3.1.25 version.

20090828:
  AFFECTS: users of mail/dovecot and mail/dovecot-sieve
  AUTHOR: yds@CoolRat.org

  dovecot-sieve has been updated to a new implementation compatible with
  dovecot 1.2.x.  For details of what this means please refer to:

    http://wiki.dovecot.org/LDA/Sieve/Dovecot#Migration_from_CMUSieve

20090827:
  AFFECTS: users of www/mediawiki
  AUTHOR: miwi@FreeBSD.org

  www/mediawiki version is 1.15.1 now.  1.14.1 version was preserved as
  www/mediawiki114 port.

20090818:
  AFFECTS: users of security/gnutls and any port that depends on it
  AUTHOR: novel@FreeBSD.org

  GnuTLS has been updated to 2.8.3 and all shared libraries' versions have
  been bumped.  So you need to rebuild all applications that depend on
  gnutls.  Do something like:

    portupgrade -rf gnutls

20090816:
  AFFECTS: users of astro/celestia and KDE
  AUTHOR: danfe@FreeBSD.org

  Celestia can now be compiled with KDE3 frontend (you can enable it with
  CELESTIA_UI=kde when building).  It is very feature-rich, as it offers
  contextual menus, toolbars, KDE integration, internationalization,
  bookmarks, etc.  If you use Celestia and KDE as your desktop, you might
  want to rebuild the port so it integrates into your environment better.

20090815:
  AFFECTS: users of mail/dovecot
  AUTHOR: wxs@FreeBSD.org

  Dovecot has been updated to version 1.2.3.  The configuration file has
  changed significantly.  Please see http://wiki.dovecot.org/Upgrading/1.2
  for details of what this means.

20090804:
  AFFECTS: users of multimedia/phonon*, x11/kdebase4*, deskutils/kdepim4
  AUTHOR: kde@FreeBSD.org

  KDE4 has been updated to version 4.3.0.  KDE now uses qt4-phonon;
  multimedia/phonon and multimedia/phonon-gstreamer are deprecated in
  favor of their qt4 equivalents.  You can still use multimedia/phonon-xine
  however.  A number of files have been moved between packages.  The
  recommended update procedure is to delete phonon, phonon-gstreamer,
  kdebase-*4*, kdepim-4*, then update ports as usual and install desired
  KDE4 ports:

    # pkg_delete -f phonon-4\* phonon-gstreamer\* kdebase-\*4\* kdepim-4\*
    # portmaster -a (or portupgrade -a)
    # cd ${PORTSDIR}/x11/kde4 && make config && make install clean

20090804:
  AFFECTS: users of devel/dbus-qt4, devel/qt4-designer
  AUTHOR: kde@FreeBSD.org

  Qt4 ports have been updated to 4.5.2.  The recommended update procedure
  is to delete qt4-dbus and qt4-designer, then update ports as usual.
  Install qt4-designer if needed.

20090802:
  AFFECTS: users of devel/libtool15 and devel/libltdl15
  AUTHOR: mezz@FreeBSD.org

  The devel/libtool15 and devel/libltdl15 ports have been moved to libtool22
  and libltdl22, respectively, then updated to 2.2.6a. You will need to run
  portmaster or portupgrade to properly perform the upgrade:

  If using portmaster:

    portmaster -o devel/libtool22 devel/libtool15
    portmaster -o devel/libltdl22 devel/libltdl15

  If using portupgrade:

    portupgrade -o devel/libtool22 libtool-1.5\*
    portupgrade -o devel/libltdl22 libltdl-1.5\*

  After that, you will need to rebuild all ports that depend on libltdl.
  Since all dependent ports' PORTREVISIONs have been bumped, you can run
  portupgrade or portmaster with `-a' option to complete the upgrade.

20090801:
  AFFECTS: users of x11-drivers/xf86-video-nouveau
  AUTHOR: rnoland@FreeBSD.org

  An updated libdrm and xf86-video-nouveau have been committed.  These
  update the API version to 0.0.14 and if you are using DRM you will need
  to update your kernel patch.  See pkg-message in xf86-video-nouveau for
  details.

20090730:
  AFFECTS: users of www/tomcat6
  AUTHOR: ale@FreeBSD.org

  Tomcat has been updated to 6.0.20 release and the installation directory
  is changed from apache-tomcat6.0 to apache-tomcat-6.0.  Backup your
  configuration files before updating Tomcat, since the previous port will
  delete them on deinstall.

20090729:
  AFFECTS: users of sysutils/heartbeat
  AUTHOR: ports@encarnate.com

  Heartbeat has been upgraded to the 2.1.4 release.  Older configurations
  based on version 1 should still work.  Read more about the new features
  and possible configuration changes at the following URLs:

    http://clusterlabs.org/wiki/Documentation (Configuration 0.6 Explained)
    http://www.linux-ha.org/GettingStartedRevisedV2

20090724:
  AFFECTS: users of www/rubygem-rails
  AUTHOR: pgollucci@FreeBSD.org

  Rails has been updated to 2.3.3.  As always, make sure you check the
  changes at http://weblog.rubyonrails.org/.

20090720:
  AFFECTS: users of net/openldap24-{client,server}
  AUTHOR: delphij@FreeBSD.org

  OpenLDAP has been upgraded to 2.4.17, which requires a shared library
  version bump.  Therefore, you need to reinstall all ports that depend on
  it.  Please do something like:

    # portupgrade -fr net/openldap24-client
  or
    # portmaster -r net/openldap24-client

20090719:
  AFFECTS: users of graphics/jpeg
  AUTHOR: dinoex@FreeBSD.org

  The IJG jpeg library has been updated to version 7.0.  Please rebuild all
  ports that depend on it.

  If you use portmaster:

    portmaster -r jpeg-

  Or, if you would prefer a more gradual approach:

    portmaster -w jpeg- (Check the man page for more information)

  If you use portupgrade:

    portupgrade -fr graphics/jpeg

20090704:
  AFFECTS: users of www/yaws
  AUTHOR: olgeni@FreeBSD.org

  The default configuration file path was changed to ${LOCALBASE}/etc/yaws
  in version 1.83.

  Please remember to update your configuration before upgrading.

20090628:
  AFFECTS: users of www/firefox3-devel
  AUTHOR: gecko@FreeBSD.org

  If your Firefox crashes with the following message while viewing a
  HTML5 page: "Bad system call (core dumped)" you need to load the sem
  module (kldload sem).

  To load sem module on every boot, put the following into your
  /boot/loader.conf:

    sem_load="YES"

20090624:
  AFFECTS: users of mail/crm114
  AUTHOR: glebius@cell.glebius.int.ru

  The new version of crm uses a new format for css files. Old files should
  be rebuilt or started from scratch. If not done, crm114 will lose any
  mail processed via it.

20090620:
  AFFECTS: users of gstreamer-plugins-bad, gstreamer-plugins-good, and
       gstreamer-plugins-ugly ports
  AUTHOR: kwm@FreeBSD.org

  Due to the move of several plugins from gstreamer-plugins-bad to
  gstreamer-plugins-good and gstreamer-plugins-ugly, it is necessary to
  update update gstreamer-plugins-bad first:

    portupgrade -R gstreamer-plugins-bad

  or, using portmaster:

    portmaster gstreamer-plugins-bad

20090619:
  AFFECTS: users of net-p2p/transmission-daemon
  AUTHOR: mezz@FreeBSD.org

  The UID/GID of transmission has been changed from 919 to 921. The data
  configure has been changed from ${PREFIX}/etc/transmission/home/.config
  to ${PREFIX}/etc/transmission/home. To update the UID/GID:

    # pw groupmod transmission -g 921
    # pw usermod transmission -u 921 -g 921

20090618:
  AFFECTS: users of www/p5-Catalyst
  AUTHOR: pgollucci@FreeBSD.org

  Most applications and plugins should run unaltered on Catalyst 5.80.

  However, a lot of refactoring work has taken place, and several changes
  have been made which could cause incompatibilities. If your application
  or plugin is using deprecated code, or relying on side effects, then you
  could have issues upgrading to this release.

  http://search.cpan.org/~mramberg/Catalyst-Runtime-5.80005/lib/Catalyst/Upgrading.pod

20090617:
  AFFECTS: users of emulators/virtualbox
  AUTHOR: beat@FreeBSD.org

  The GID of virtualbox has changed due to a conflict with databases/couchdb.
  Update GID of vboxusers after updating the port:

    # pw groupmod vboxusers -g 920

20090617:
  AFFECTS: users of math/fftw3 math/fftw3-long math/fftw3-float
  AUTHOR: db@FreeBSD.org

  The Fortran option has removed from fftw3 and moved into slave ports,
  math/fftw3-fortran math/fftw3-long-fortran and math/fftw3-float-fortran.

20090615:
  AFFECTS: users of x11-wm/enlightenment and x11-wm/enlightenment-devel
  AUTHOR: gahr@FreeBSD.org

  The development version of the Enlightenment window manager, a.k.a. E17,
  was moved from x11-wm/enlightenment-devel to x11-wm/enlightenment.  The
  DR16 branch now resides in x11-wm/e16.

20090615:
  AFFECTS: users of multimedia/mlt++
  AUTHOR: beat@FreeBSD.org

  The multimedia/mlt++ port was incorporated into multimedia/mlt since
  version 0.4.2.  Delete multimedia/mlt++ first and then install/update
  multimedia/mlt.

20090613:
  AFFECTS: users of www/hudson
  AUTHOR: hq@FreeBSD.org

  Hudson is now running as a standalone process and no longer relies on
  Apache Tomcat.  As such, it should now be configured by defining
  hudson_* variables in rc.conf.  See comments from rc.d script for further
  details.

  The default setup is using the same port numbers and HTTP URL prefix as
  before in order to reduce the effort of upgrading the port.  Hence, it
  may conflict with some running Apache Tomcat instance.  To fix this
  problem, you may either deinstall www/tomcat6, or use the following
  settings in hudson_args from /etc/rc.conf:

    --httpPort=??? --ajp13Port=???

20090611:
  AFFECTS: users of www/apache22
  AUTHOR: pgollucci@FreeBSD.org

  Two rc.d scripts have been renamed:

    apache22.sh -> apache22
    htcacheclean.sh -> htcacheclean

  You'll need to update any crons wrappers, etc. for the new paths.

20090608:
  AFFECTS: users of lang/python* and py-*
  AUTHOR: miwi@FreeBSD.org

  The default version of Python has been changed from 2.5.x to 2.6.x.
  If you have 2.5.x installed, perform an upgrade of lang/python25 to
  lang/python26 with one of the following commands:

  If using portupgrade:
  # portupgrade -o lang/python26 lang/python25

  If using portmaster:
  # portmaster -o lang/python26 lang/python25

  If you want to retain 2.5.x as default Python version, set the
  PYTHON_DEFAULT_VERSION variable to 'python2.5' (without quotes) in
  /etc/make.conf, then go to lang/python and perform the following
  command:

  # portupgrade -R python

  Once the installed Python has been updated to 2.6, by using the
  method above, it is required to run the upgrade-site-packages target in
  lang/python to assure that site-packages are made available to the new
  Python version.

  If using portupgrade:
  # cd /usr/ports/lang/python && make upgrade-site-packages

  If using portmaster:
  # cd /usr/ports/lang/python && make upgrade-site-packages -DUSE_PORTMASTER

  The portmaster case can take quite some time to complete due to the lack of
  cached information that the portupgrade suite uses (specifically pkg_which).
  This is not the fault of portmaster.

20090606:
  AFFECTS: users of java/eclipse
  AUTHOR: glewis@FreeBSD.org

  The update to 3.4.2 changes the location of the metadata for eclipse to
  be more in line with what is used on other platforms.  This means that
  after the update plugins that have been installed by a user with the
  built in Update Manager will need to be reinstalled.

20090605:
  AFFECTS: users of mail/postfix
  AUTHOR: itetcu@FreeBSD.org

  Version 2.6.1 introduced a POLA violation by expecting aliases.db to be
  in /etc/mail/aliases.db (not /etc/aliases.db).  With this version the
  location is reverted to the right place.

  If you updated your installation to 2.6.1 you need to run newaliases(1)
  again after you installed 2.6.2.

20090603:
  AFFECTS: users of japanese/font-mplus-ipa (and old japanese/ipa-ttfonts)
  AUTHOR: hrs@FreeBSD.org

  IPAUIGothic has been updated to a version included in IPA font
  version 002.03 and added as a separated port
  "japanese/font-ipa-uigothic".  And the font-mplus-ipa has been
  updated to remove the old IPAUIGothic.

  Thus the old ipa-ttfonts is almost equivalent to font-ipa +
  font-ipa-uigothic + font-mplus-ipa.  Note that these three packages
  have different licenses from each other.

20090601:
  AFFECTS: users of devel/cvs-devel
  AUTHOR: wxs@FreeBSD.org

  cvs-devel no longer installs /bin/cvs and /bin/cvsbug. These are now
  installed into ${PREFIX}/bin. If you wish to use these please be aware
  of this change with respect to your path.

20090531:
  AFFECTS: users of devel/viewvc
  AUTHOR: pgollucci@FreeBSD.org

  viewvc.conf and templates are not compatible to 1.0.x version, even the
  database scripts have changed.  For details see:

  http://viewvc.tigris.org/source/browse/*checkout*/viewvc/trunk/docs/upgrading-howto.html

20090530:
  AFFECTS: users of Japanese and Chinese fonts
  AUTHOR: hrs@FreeBSD.org

  Ports for Japanese fonts have been reorganized in the following way:

    japanese/ipa-ttfonts -> japanese/font-mplus-ipa
    japanese/ipa-ttfonts -> japanese/font-ipa
    japanese/kochi-ttfonts -> japanese/font-kochi
    japanese/mplusfonts -> japanese/font-mplus
    japanese/sazanami-ttf -> japanese/font-sazanami
    japanese/shinonome -> japanese/font-shinonome
    japanese/umefont -> japanese/font-ume
    japanese/vlgothic -> japanese/font-vlgothic

  While basically these are port name changes for consistency,
  installation directories are also changed:

    font files -> ${PREFIX}/share/${PORTNAME}/*
    symlinks -> ${PREFIX}/share/fonts/{TTF,OTF,fontname,...}/*
    symlinks -> ${PREFIX}/lib/X11/fonts/{TTF,OTF,misc,fontname,...}/*

  A user-visible one is that the directory name "TrueType" is replaced
  with "TTF".

  Also, japanese/font-std and chinese/font-std have been added as
  standard fonts used in the Ports Collection.  Currently they
  contain:

    std.ja_JP/Mincho
    std.ja_JP/Gothic
    std.ja_JP/Ryumin-Light
    std.ja_JP/GothicBBB-Medium
    std.zh_CN/STHeiti-Regular
    std.zh_CN/STSong-Light
    std.zh_CN/MSung-Light
    std.zh_CN/MHei-Medium

  under ${PREFIX}/share/fonts/.  They are just symlinks to
  corresponding font files.  The symlink names are based on popular
  PostScript font names.

  Applications should refer the font files via XLFD or fontconfig
  first.  If they need a direct reference to the font file, please use
  files in std.*/*.  This is because direct reference to a specific
  font name in an application configuration file makes the maintenance
  difficult when the font file name is changed, for example.

20090516:
  AFFECTS: users of devel/viewvc
  AUTHOR: pgollucci@FreeBSD.org

  OPTION APACHE2 has been changed to APACHE (WITH_APACHE)
  WITH_APACHE2 is deprecated and is being removed.
  APACHE_PORT will be pulled in when WITH_APACHE is selected

20090516:
  AFFECTS: users of print/cups-base and portupgrade
  AUTHOR: dinoex@FreeBSD.org

  The print/cups port has been split into multiple ports.  If upgrading
  from 1.3.10_1 and below, you must remove the installed version first.

20090412:
  AFFECTS: users of sysutils/bacula-server
  AUTHOR: wxs@FreeBSD.org

  sysutils/bacula-server now uses a new catalog format.  If upgrading
  from the old version please use the update_bacula_tables script
  provided with the port before restarting bacula.

20090410:
  AFFECTS: users of www/trac-email2trac
  AUTHOR: brooks@FreeBSD.org

  bin/email2trac.py and bin/delete_spam.py are now installed without the
  .py extension to make the suid run_email2trac work and match the online
  documentation.  If you were using them in scripts or alias entries, you
  will need to update paths accordingly.

20090401:
  AFFECTS: users of Fedora 8 Linux infrastructure ports
  AUTHOR: bsam@FreeBSD.org

  ATTENTION! Those ports are not default for any version of FreeBSD for now
  and may be used with FreeBSD versions 7.2 and above (8-CURRENT is better)
  using compat.linux.osrelease=2.6.16 and linux_base-f8. Please, note that
  2.6.16 is not fully supported on 7.x (ex., some syscalls are missing
  and cannot be MFCed due to a native FreeBSD ABI breakage).

  For more information about transition please read item "20070327: AFFECTS:
  users of emulators/linux_base-fc6". That note may be used for upgrading
  to linux_base-f8 and Fedora 8 Linux infrastructure ports as well.

  If you want to switch to linux-f8 ports, please define at /etc/make.conf:

    OVERRIDE_LINUX_BASE_PORT=f8
    OVERRIDE_LINUX_NONBASE_PORTS=f8

20090328:
  AFFECTS: users of lang/perl*
  AUTHOR: skv@FreeBSD.org

  lang/perl5.10 is out. If you want to switch to it from, for example
  lang/perl5.8, that is:

  Portupgrade users:
    0) Fix pkgdb.db (for safety):
    pkgdb -Ff

    1) Reinstall new version of Perl (5.10):
    env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.10 -f perl-5.8.\*

    2) Reinstall everything that depends on Perl:
    portupgrade -fr perl

  Portmaster users:
    env DISABLE_CONFLICTS=1 portmaster -o lang/perl5.10 lang/perl5.8
    portmaster -r perl-

  Note: If the "perl-" glob matches  more than one port you will need to
    specify the name of the Perl directory in /var/db/pkg explicitly.

20090327:
  AFFECTS: users of security/clamav
  AUTHOR: garga@FreeBSD.org

  After version 0.95 clamav-milter does not accept parameters by command
  line.  If you are using $clamav_milter_flags on rc.conf to set its
  parameters you will need to move to new ${PREFIX}/etc/clamav-milter.conf.

20090319:
  AFFECTS: users of shells/bash3
  AUTHOR: ehaupt@FreeBSD.org

  With the addition of shells/bash version 4.x, people wanting to stick
  with bash 3.x should perform the following update:

    $ portupgrade -f -o shells/bash3 bash

20090318:
  AFFECTS: users of www/suphp
  AUTHOR: yzlin@cs.nctu.edu.tw

  The suPHP port has been upgraded to 0.7.x. This new version of suPHP has
  some new features and changes for the configuration file:

    - Multiple path (with patterns) & variable substitution support for
      docroots
    - Double-quoted strings at section '[handlers]'
      ex. application/x-httpd-php="php:/usr/local/bin/php-cgi"

  These changes may lead to internal server error if without modifications
  of the configuration file from previous version.

20090316:
  AFFECTS: users of www/geeklog
  AUTHOR: beat@FreeBSD.org

  To follow the standards this port has received a small reworking.

  WWW_DIR (that defaulted to PREFIX/www/data/geeklog) is deprecated,
  use WWWDIR (defaults to PREFIX/www/geeklog).

20090316:
  AFFECTS: users of net-im/ejabberd
  AUTHOR: skylord@linkline.ru

  ejabberd's UID and GID have changed (PR ports/105122). Users are advised
  to check all configuration files and data in /var/spool/ejabberd to
  ensure everything has the correct owner/group.

20090316:
  AFFECTS: users of sysutils/lire
  AUTHOR: edwin@FreeBSD.org

  Lire now requires DBD::SQLite, which uses SQLite 3.0.  This means that the
  Lire database format has changed.  If you have one or more old Lire stores,
  you will need to convert each of them from SQLite2 format to SQLite3 like
  this:

    $ sqlite oldstore.db .dump | sqlite3 newstore.db

  This assumes that you have both SQLite2 and SQLite3 installed on your
  system, and that the names of the command line interface for the old and
  new version are `sqlite' and `sqlite3' respectively (this is at least
  correct for Fedora).

20090310:
  AFFECTS: users of multimedia/mythtv
  AUTHOR: glarkin@FreeBSD.org

  The upgrade from version 0.20 to version 0.21 should be transparent.
  Any changes to the database structure should be applied automatically.

  However, it is strongly recommended that you back up your database before
  installing a new version of MythTV.

  For example:

    $ mysqldump -u mythtv -pmythtv mythconverg -c > mythtv_backup.sql

  To restore (assuming that you've dropped the database):

    $ mysql -u root
    mysql>create database mythconverg;
    mysql>exit
    $ mysql -u mythtv -pmythtv mythconverg < mythtv_backup.sql

20090309:
  AFFECTS: users of devel/libusb on CURRENT
  AUTHOR: stas@FreeBSD.org

  FreeBSD libusb20 was renamed to libusb in r189585 and thus, being fully
  compatible with libusb20, replaces devel/libusb on HEAD.  devel/libusb
  should not be used on these systems.  Users of libusb-dependent ports
  are advised to remove libusb package from their systems, and rebuild all
  libusb dependencies.  One of the possible ways to achieve this is
  listed below:

    # set tempfile=`mktemp /tmp/usbports.XX`
    # pkg_info -qR /var/db/pkg/libusb-* > ${tempfile}
    # pkg_delete -f /var/db/pkg/libusb-*
    # cat ${tempfile} | xargs portupgrade -f
    # rm -f ${tempfile}

20090309:
  AFFECTS: users of multimedia/phonon
  AUTHOR: kde@FreeBSD.org

  multimedia/phonon port has been split into phonon itself, phonon-xine,
  and phonon-gstreamer backends.  After updating phonon port you have
  to install at least one backend; phonon-xine backend is recommended
  for KDE.

20090308:
  AFFECTS: users of emulators/qemu
  AUTHOR: nox@FreeBSD.org

  The port has been updated to 0.10.0, which now uses the newer
  (incompatible) kqemu-kmod-devel port that now also works for the
  32 bit "qemu" executable on amd64.  If you upgrade emulators/qemu
  with the KQEMU knob on, you have to

    # pkg_delete kqemu-kmod-1\*

  the old kqemu version first if it is installed.

20090304:
  AFFECTS: users of comms/py-gammu
  AUTHOR: bsam@FreeBSD.org

  The port comms/py-gammu was incorporated into comms/gammu since
  1.23.0. Delete comms/py-gammu first and then deinstall/reinstall
  comms/gammu with option WITH_PYTHON_GAMMU=YES.

20090304:
  AFFECTS: users of x11-wm/xfce4
  AUTHOR: oliver@FreeBSD.org

  When upgrading from Xfce 4.4 to 4.6 make sure you uninstall the following
  ports:

    x11/libxfce4mcs
    sysutils/xfce4-mcs-manager
    sysutils/xfce4-mcs-plugins
    x11-themes/xfce4-icon-theme

  You may uninstall them before you start the upgrade procedure (preferred)
  or even afterwards when the upgrade went fine.

  Please also note that Xfce 4.6 does not come with an icon theme any more.
  Xfce 4.6 now depends on the Tango theme which is now installed by default.
  The default installation of Xfce is also adjusted to use this icon theme
  instead of the Xfce 4.4 standard Rodent theme.  If you are upgrading from
  Xfce 4.4 to 4.6 you probably still have the Rodent theme selected.  This
  will lead to several "missing" icons when starting up Xfce.

  Make sure to switch as well to the Tango theme.  To do this just open the
  Settings Manager and select Appearance.  Inside the Appearance dialog
  switch to the Icons tab and select the "Tango" entry in the list on the
  left side of the Icons tab.

  For enabling the Reboot/Shutdown functionality of Xfce's logout dialog
  please read the note which gets printed out after the installation of
  x11-wm/xfce4 about how to configure PolicyKit.

20090223:
  AFFECTS: users of Tcl/Tk
  AUTHOR: mm@FreeBSD.org

  The default version of Tcl/Tk has been changed from 8.4 to 8.5.

  To restore old behavior and prefer using Tcl 8.4 with supported ports set
  WITH_TCL_VER=84 in /etc/make.conf. This has no effect on ports that have
  USE_TCL=yes or USE_TK=yes. They stick to the new default version and have
  to be updated by their maintainers to support other versions than default.

20090218:
  AFFECTS: users of www/zend-framework
  AUTHOR: glarkin@FreeBSD.org

  A local file inclusion (LFI) vulnerability was fixed in Zend Framework
  1.7.5. The LFI was present in the Zend_View::render() method, and
  allowed inclusion of scripts with relative path names, e.g.
  "../../../my/script/dir/myscript.php".

  If the script path name is hard-coded into the application and is not
  generated by user input, the vulnerability does not apply.  Because of
  this exception, the Zend Framework team has added a flag to disable
  the LFI protection in the render() method.

  Full details of the vulnerability, whether it applies to your
  application and how to disable the LFI protection in the render()
  method can be found here:

  http://framework.zend.com/manual/en/zend.view.migration.html

20090216:
  AFFECTS: users of net/openldap24-{client,server}
  AUTHOR: delphij@FreeBSD.org

  OpenLDAP has been upgraded to 2.4.14, which requires a shared library
  version bump.  Therefore you need to reinstall all ports that depend on
  it.  Please do something like:

    # portupgrade -fr net/openldap24-client

20090209:
  AFFECTS: users of multimedia/phonon, x11/kdelibs4, x11/kdebase4*,
  deskutils/kdepimlib4, deskutils/kdepim4, devel/automoc4
  AUTHOR: kde@FreeBSD.org

  KDE4 has been updated from 4.1.4 to 4.2.0.  A number of applications
  have been moved between packages.  The easiest way to avoid various
  problems during update is to delete all KDE-4.1.4 ports and install
  KDE-4.2.0:

    # pkg_delete -f kde\*4.1.4\* automoc4-\*
    # portmaster -a (or portupgrade -a)
    # cd ${PORTSDIR}/x11/kde4 && make config && make install clean

20090207:
  AFFECTS: users of devel/libslang and devel/libslang2
  AUTHOR: pgollucci@FreeBSD.org

  devel/libslang has been removed in favor of devel/libslang2 after not
  being released during last five years.  WITH_SLANG2 is no longer a
  valid ports KNOB.  All ports that depend on devel/libslang should be
  recompiled, e.g.:

    # portupgrade -o devel/libslang2 devel/libslang

20090130:
  AFFECTS: users of www/httptunnel
  AUTHOR: rafan@FreeBSD.org

  The startup script has been converted to new rc.d style and split
  into two scripts: htc (client) and hts (server). Please check the scripts
  for how to set variables in /etc/rc.conf.

20090127:
  AFFECTS: users of gstreamer-plugins
  AUTHOR: kwm@FreeBSD.org

  The gstapp library moved from the gstreamer-plugins-bad package to
  gstreamer-plugins.  It will be necessary to rebuild the gstreamer-plugins
  port.  After updating your installed ports please do (if you are using
  portupgrade):

    # portupgrade -f gstreamer-plugins

20090127:
  AFFECTS: users of www/xpi-deepestsender
  AUTHOR: pgollucci@FreeBSD.org

  www/xpi-deepestsender has been updated to version 0.9.0.  This version
  is *only* for Firefox version 3.x.

20090124:
  AFFECTS: users of x11-servers/xorg-server, sysutils/hal
  AUTHOR: rnoland@FreeBSD.org

  sysutils/hal has been updated and should now properly detect mice for
  in X.Org.  Use of AllowEmptyInput should no longer be needed for most
  users and moused should now work fine.

20090123:
  AFFECTS: users of x11-servers/xorg-server
  AUTHOR: rnoland@FreeBSD.org

  If you are using an older xorg.conf several config lines are no longer
  needed and will generate warnings when X is started.  RgbPath will cause
  X to fail to start, remove it from your config.

  Server 1.5.3 also really wants to configure its input devices via hald.
  This is causing some issues with moused and /dev/sysmouse.  There are
  couple of options for how to deal with it:

  1. Add Option "AllowEmptyInput" "off" to your ServerLayout section.
     This will cause X to use the configured kbd, mouse, and vmmouse
     sections from your xorg.conf

  2. Don't use moused.  If you want it to work with addon USB mice
     set this in rc.conf:

    moused_enable="NO"
    moused_nondefault_enable="NO"

  I'm working on fixing hald or the mouse driver or both.

20090123:
  AFFECTS: users of x11/libxcb
  AUTHOR: flz@FreeBSD.org

  Libxcb shared library version was bumped from 1 to 2.  You need to
  rebuild any consumer of libxcb.so.1 or some applications will be
  linked against two versions of libxcb once libX11 is upgraded.

  For portupgrade users:

    # portupgrade -rf libxcb

20090121:
  AFFECTS: users of devel/linux-glib2, emulation/linux_base-f4
  AUTHOR: bsam@FreeBSD.org

  Glib2 now is incorporated to emulation/linux_base-fc4 (it has always
  been a part of more recent Linux base ports). All users should deinstall
  devel/linux-glib2 and then deinstall/reinstall emulation/linux_base-f4.

20090119:
  AFFECTS: users of mail/claws-mail, mail/claws-mail-smime
  AUTHOR: netchild@FreeBSD.org

  The claws-mail port includes the S/MIME plugin itself now, it is not
  distributed as a separate plugin anymore. It can be enabled with the
  GPGME option in the port (disabled by default). If you use the S/MIME
  plugin, you should remove the mail/claws-mail-smime port before
  enabling GPGME and updating the mail/claws-mail port. People which
  already updated mail/claws-mail with GPGME enabled and a non-working
  S/MIME plugin need to deinstall mail/claws-mail-smime and reinstall
  mail/claws-mail.

20090118:
  AFFECTS: users of net-p2p/deluge
  AUTHOR: mezz@FreeBSD.org

  The Deluge has been updated from 0.5.x to 1.x. The 1.x has been rewritten,
  so it is recommend for you to make the back up of your ~/.config/deluge. The
  configuration and plugins of 0.5.x do not work in 1.x. Deluge will picking
  up the old configuration and try to convert it to the newer format, but I
  wouldn't trust it to do it without the back up.

  If you prefer to stick with 0.5.x, you can use portmaster:

    # portmaster -o net-p2p/deluge05 net-p2p/deluge

  or if you use portupgrade:

    # portupgrade -o net-p2p/deluge05 net-p2p/deluge

20090118:
  AFFECTS: users of www/ikiwiki
  AUTHOR: brix@FreeBSD.org

  IkiWiki has been upgraded from 2.x to 3.x.  Instructions for
  migrating existing IkiWiki configurations to 3.x format can be found
  at http://ikiwiki.info/tips/upgrade_to_3.0/.

20090118:
  AFFECTS: users of devel/apr-svn devel/apr
  AUTHOR: pgollucci@FreeBSD.org

  devel/apr-svn has been removed and devel/apr now handles its role.
  devel/apr now defaults to building with Berkeley database support (bdb)
  APR_UTIL_* tunables have been renamed to comply with ports/KNOBS names.

20090114:
  AFFECTS: users of x11/kdebase4-workspace, x11/kdebase4-runtime
  AUTHOR: kde@FreeBSD.org

  KDE4 has been updated from 4.1.1 to 4.1.4.  A number of files have been
  moved between packages.  You should deinstall kdebase4-runtime package
  before updating:

    pkg_delete -f kdebase-runtime-4.1\*
    portmaster -a

  After successful update you could install kdebase4-runtime if it has not
  been installed during update process.

20090114:
  AFFECTS: users of GNOME and GTK+
  AUTHOR: gnome@FreeBSD.org

  GNOME has been updated to 2.24.x.  You have to deinstall a few ports
  first before using portupgrade or portmaster in order to successfully
  upgrade your GNOME installation.  After successful upgrade, you have
  to reinstall gnome-session so the gnome.desktop session file is properly
  installed.

  Portupgrade users:

    # pkgdb -Ff
    (Answer "yes" to unregister gail while keeping gtk20.)
    (Answer "yes" to unregister fast-user-switch-applet while
     keeping gdm.)

    # pkg_deinstall -fO gtkmm-2.12\*
    # portupgrade -aOW
    # portupgrade -f gnome-session

  Portmaster users:

    # pkg_delete -f gtkmm-2.12\*
    # portmaster -a
    # portmaster gnome-session

20090113:
  AFFECTS: users of lang/perl5.8
  AUTHOR: skv@FreeBSD.org

  lang/perl5.8 has been updated to 5.8.9.  You should update everything
  that depends on perl.  The easiest way to do that is to use
  perl-after-upgrade script supplied with lang/perl5.8.  Please see its
  manual page for details.

20090112:
  AFFECTS: users of mail/claws-mail*
  AUTHOR: miwi@FreeBSD.org

  claws-mail has been updated to 3.7.0, with this update OpenSSL support
  has been removed by upstream in favour of GnuTLS.  GnuTLS is now enabled
  by default.  Themes were have also been split to an extra port which
  your can find under x11-themes/claws-mail-themes.  Menu was rewritten
  entirely in version 3.6.0 using modern GTK interface; as a consequence,
  all your custom shortcuts will be lost after upgrade.

20090109:
  AFFECTS: users of any Mozilla and Opera products
  AUTHOR: mezz@FreeBSD.org

  The Java plugins now will no longer be picked up by automatically from
  these browsers.  Because all Java ports share the name of plugins file,
  I am thinking about someone or maybe me will need to write something
  similar to nspluginwrapper (but in shell script) that can add Java plugin
  in ~/.*/plugins/ when user requests one specific version of Java plugin
  if this user has more than one version of Java installed.  However, for
  now, you will have to add Java plugin in ~/.*/plugins/ manually.

20090107:
  AFFECTS: users of databases/unixODBC
  AUTHOR: beech@FreeBSD.org

  The databases/unixODBC port has been updated to 2.2.14.  While
  containing many bug fixes and minor feature adjustments, this version
  no longer ships with the (obsolete) MySQL ODBC driver.  MySQL ODBC
  driver users will probably want to use databases/mysql-connector-odbc
  instead.  The text-backed/flatfile driver (libtxtodbc) has also been
  removed by the developers but due to some demand may make a return in
  a future version or as a separate port.

20090107:
  AFFECTS: users of security/libgcrypt
  AUTHOR: rafan@FreeBSD.org

  libgcrypt has been upgraded to 1.4.3 which has a shared library version
  bump.  You need to reinstall all ports that depend on it.  Use something
  like this:

    portupgrade -rf libgcrypt
    portmaster -r libgcrypt

20090104:
  AFFECTS: users of net/openldap24-{client,server}
  AUTHOR: delphij@FreeBSD.org

  OpenLDAP has been upgraded to 2.4.13, which requires a shared library
  version bump.  Therefore, you need to reinstall all ports  that depend on
  it.  Please do something like:

    # portupgrade -fr net/openldap24-client

20081230:
  AFFECTS: users of net/rabbitmq
  AUTHOR: pneumann@gmail.com

  The database schema has changed between RabbitMQ-1.4.0 and this release.
  When the RabbitMQ server detects the presence of an old database, it
  moves it to a backup location, creates a fresh, empty database, and
  logs a warning.

20081226:
  AFFECTS: users of www/rt38
  AUTHOR: pgollucci@FreeBSD.org

  www/rt38 now respects the FreeBSD directory layout, see hier(7).
  With this change, p5-RT-* and p5-RTx-* should be much simpler to use
  in the ports collection.

  Please note that www/p5-RTx-Shredder is included in www/rt38.  This
  port will be deprecated and removed.

20081228:
  AFFECTS: users of astro/boinc-setiathome-enhanced
  AUTHOR: rene@FreeBSD.org

  The setiathome client has been updated to version 6.03 and version 5.00
  of the astropulse client has been added.  Before you update, finish and
  report your current workunits to avoid losing them.  The port now also
  includes the client screensavers.

20081228:
  AFFECTS: users of japanese/kinput2
  AUTHOR: hrs@FreeBSD.org

  The Wnn backend of japanese/kinput2 port now uses unix domain socket
  to communicate the server by default.  If $JSERVER environment
  variable is defined, the value is used as the server host name.  In
  In short, the server name is determined in the following way:

  $JSERVER --(if null)--> CcWnn.Jserver --(if null)--> "localhost"

  If the server host name is null or matches "^unix$", unix domain
  socket is used.  Note that the default server name in CcWnn.Jserver
  is "unix" now.

20081226:
  AFFECTS: users of www/rt*
  AUTHOR: pgollucci@FreeBSD.org

  www/rt2 www/rt3 www/rt32 www/rt34 are now deprecated and will expire
  2009-02-01.  All ports now depend on www/rt38 If you can not update
  to www/rt38, www/rt36 is still around.

20081224:
  AFFECTS: users of www/phpSysInfo
  AUTHOR: miwi@FreeBSD.org

  The www/phpSysInfo port has been split into www/phpsysinfo and
  www/phpsysinfo-dev ports.

20081217:
  AFFECTS: users of mail/policyd2
  AUTHOR: wxs@FreeBSD.org

  The RC script for mail/policyd2 has been renamed to avoid a conflict.
  If you use this port please change the setting in rc.conf to be
  policyd2_enable.

20081211:
  AFFECTS: users of lang/php5
  AUTHOR: pav@FreeBSD.org, itetcu@FreeBSD.org, ale@FreeBSD.org

  As of PHP 5.2.7, pcre extension is distributed with the core PHP5 package,
  and not as a standalone module anymore.  Follow the steps below to update
  your installation.

  Portupgrade users:

    pkg_delete -f php5-pcre-5.2.6
    pkgdb -F
    portupgrade as usual

  Portmaster users:

    pkg_delete -f php5-pcre\*
    portmaster php5

  If you are using pecl ports you might need to force an update on them:

    portupgrade -f pecl\*
  or
    portmaster pecl

  If you have the pecl hash, json and/or zip extensions you need to replace
  them with the PHP5 bundled ones, e.g.:

    portmaster/portupgrade -o archivers/php5-zip archivers/pecl-zip
    portmaster/portupgrade -o devel/php5-json devel/pecl-json
    portmaster/portupgrade -o security/php5-hash security/pecl-hash

  If you build your INDEX locally and you tried to build it after the PHP
  update commit, you need to rebuild it _after_ you updated lang/php5:

    cd /usr/ports && make index

  or (if you use ports-mgmt/p5-FreeBSD-Portindex):

    cd /usr/ports && cache-init && portindex -o `make -V INDEXFILE`

20081207:
  AFFECTS: users of games/mkgichessclub
  AUTHOR: nivit@FreeBSD.org

  After the update to the version 2.2.0, please, alter the SQL tables
  with the command:

    mysql _mkgichessclub_ < /usr/local/share/mkgichessclub/db_migrate_2.1_to_2.2.sql

  where _mkgichessclub_ is the database name chosen during the installation
  of the port.

20081205:
  AFFECTS: users of net-p2p/ktorrent
  AUTHOR: makc@FreeBSD.org

  ktorrent has been updated to 3.1.5 for KDE 4. The last release of ktorrent
  for KDE 3 is available under net-p2p/ktorrent2.

20081121:
  AFFECTS: users of comms/smstools3
  AUTHOR: mm@FreeBSD.org

  The startup script of comms/smstools3 has changed. For increased security
  smstools now runs as user uucp / group dialer by default. The script
  commands like sendsms etc. should be executed as user uucp.
  To restore the old behaviour, set smsd_user="root" and smsd_group="wheel"
  in your /etc/rc.conf.

  Hint: use security/sudo for running smsd scripts as user uucp.

20081108:
  AFFECTS: users of editors/tamago
  AUTHOR: hrs@FreeBSD.org

  The Wnn backend of editors/tamago port now uses unix domain socket
  to communicate the server by default.  If $[CJKT]SERVER environment
  variable is defined, the value is used as the server host name.  In
  JSERVER case, for example, the server name is determined in the
  following way:

    $JSERVER --(if null)--> wnn-jserver --(if null)--> "unix"

  If the server host name is null or matches "^unix$", unix domain
  socket is used.  The path name of the socket can be specified in
  wnn-[cjkt]udpath custom variable.

20081105:
  AFFECTS: users of french/pluxm-devel
  AUTHOR: jadawin@FreeBSD.org

  Please, use
  http://download.pluxml.org/plugins/migration-blog-beta3x-beta4.zip to
  migrate. It's strongly advised to backup your blog before updating.

20081102:
  AFFECTS: users of devel/git
  AUTHOR: wxs@FreeBSD.org

  The location of git-shell has changed to
  ${PREFIX}/libexec/git-core/git-shell.  Please remove the old entry from
  /etc/shells.

20081030:
  AFFECTS: users of japanese/FreeWnn-server
  AUTHOR: hrs@FreeBSD.org

  The jserver daemon in japanese/FreeWnn-server port now uses "127.0.0.1"
  as the default listen address for security reason.  If you need
  the wildcard address (INADDR_ANY), you have to explicitly set
  "listenaddr" to 0.0.0.0 in ${PREFIX}/lib/wnn/ja_JP/jserverrc or
  add "-a 0.0.0.0" to ${wnn_flags} in /etc/rc.conf.

20081026:
  AFFECTS: users of www/asterisk-gui
  AUTHOR: pneumann@gmail.com

  The upgrade to version 2.0 will modify your asterisk dialplan when login
  to the page. Hardware autodetection will not work, pending update of
  misc/zaptel.

20081028:
  AFFECTS: users of www/codeigniter
  AUTHOR: glarkin@FreeBSD.org

  For certain installations, the following steps should be performed
  after the CodeIgniter 1.7.0 upgrade (taken from:
  http://codeigniter.com/user_guide/installation/upgrade_170.html).

  >>> Update your Session Table

  If you are using the Session class in your application, AND if you
  are storing session data to a database, you must add a new column
  named user_data to your session table. Here is an example of what
  this column might look like for MySQL:

    user_data text NOT NULL

  To add this column you will run a query similar to this:

    ALTER TABLE `ci_sessions` ADD `user_data` text NOT NULL

  You'll find more information regarding the new Session functionality
  in the Session class page:

    http://codeigniter.com/user_guide/libraries/sessions.html

  >>> Update your Validation Syntax

  This is an optional, but recommended step, for people currently
  using the Validation class. CI 1.7 introduces a new Form Validation
  class (http://codeigniter.com/user_guide/libraries/form_validation.html)
  which deprecates the old Validation library. We have left the old one
  in place so that existing applications that use it will not break, but
  you are encouraged to migrate to the new version as soon as possible.
  Please read the user guide carefully as the new library works a little
  differently, and has several new features.

20081026:
  AFFECTS: users of japanese/sj3-server
  AUTHOR: hrs@FreeBSD.org

  The sj3serv daemon in japanese/sj3-server port now uses "localhost"
  as the default listen address for security reason.  If you need
  the wildcard address (INADDR_ANY), you have to explicitly set
  "servername" to 0.0.0.0 in ${PREFIX}/etc/sj3/serverrc.

20081026:
  AFFECTS: users of japanese/Canna and japanese/sj3
  AUTHOR: hrs@FreeBSD.org

  The japanese/Canna and japanese/sj3 port have been split into
  japanese/canna-server and japanese/canna-lib, and japanese/sj3-server
  and japanese/sj3-lib, respectively for more fine-grained dependency
  management in the Ports Collection.

20080926:
  AFFECTS: users of www/squid30
  AUTHOR: tmseck@netcologne.de

  The Squid developers decided to disable COSS support in 3.0, cf.
  the discussion starting here:

    http://www.squid-cache.org/mail-archive/squid-dev/200809/0067.html

  The corresponding port configuration option WITH_SQUID_COSS is still
  available but is a no-op for now.  If you currently use COSS storage with
  Squid 3.0 you need to disable it in squid.conf.

20080924:
  AFFECTS: users of ftp/proftpd
  AUTHOR: beech@FreeBSD.org

  proftpd now stores its .delay and .scoreboard files in /var/run/proftpd
  instead of /var/run.  If you are updating an existing installation,
  adjust the following in /usr/local/etc/proftpd.conf:

    ScoreboardFile  /var/run/proftpd/proftpd.scoreboard

  Also of note: The third party modules, mod_codeconv, mod_comb, and
  mod_sql_tds are not compatible with this release and have been removed.
  They will be re-added when the respective authors provide updated versions.

20080909:
  AFFECTS: users of security/logcheck
  AUTHOR: glarkin@FreeBSD.org

  logcheck now stores its configuration files in /usr/local/etc/logcheck
  instead of /usr/local/etc.  If you are upgrading the port from version
  1.1.1 to version 1.2.54, copy the following files to a temporary location,
  in case they are removed during the upgrade:

    /usr/local/etc/logcheck.hacking
    /usr/local/etc/logcheck.ignore
    /usr/local/etc/logcheck.violations
    /usr/local/etc/logcheck.violations.ignore

  e.g.:

    cd /usr/local/etc
    mkdir /tmp/logcheck.saveconf
    cp logcheck.hacking logcheck.ignore logcheck.violations* \
       /tmp/logcheck.saveconf

  After the upgrade, integrate your local changes to the files listed
  above into the new configuration files found in the following directories:

    /usr/local/etc/logcheck/cracking.d
    /usr/local/etc/logcheck/ignore.d.paranoid
    /usr/local/etc/logcheck/ignore.d.server
    /usr/local/etc/logcheck/ignore.d.workstation
    /usr/local/etc/logcheck/violations.d
    /usr/local/etc/logcheck/violations.ignore.d

  Please consult the following files for more information about
  logcheck rules and reporting levels:

    /usr/local/share/doc/logcheck/README.logcheck
    /usr/local/share/doc/logcheck/README.logcheck-database

  Also note that the upgraded port installs a crontab file for user
  "logcheck" that executes the logcheck script every hour and emails
  the results to root.  If the installation process cannot install
  the crontab file, it can be installed manually from
  /usr/local/share/examples/logcheck/crontab.in, e.g.:

    crontab -u logcheck /usr/local/share/examples/logcheck/crontab.in

20080907:
  AFFECTS: users of www/mediawiki
  AUTHOR: miwi@FreeBSD.org

  www/mediawiki version is 1.13 now.  1.12 version was preserved as
  www/mediawiki12 port.

20080902:
  AFFECTS: users of net-mgmt/nagios and net-mgmt/nagios-devel
  AUTHOR: Jarrod Sayers <jarrod@netleader.com.au>

  The stable Nagios port has now been updated to version 3.0.3.  Upgrading
  to this version shouldn't require any configuration changes, but note that
  most sample configuration files were moved into objects/ directory.

  Nagios 2.12 is still available as net-mgmt/nagios2, use the following to
  remain on this legacy stable branch:

    portmaster -o net-mgmt/nagios2 net-mgmt/nagios

  or, if you're using portupgrade:

    portupgrade -o net-mgmt/nagios2 net-mgmt/nagios

  Nagios 3.x development continues in net-mgmt/nagios-devel, users of this
  port in production use should consider switching to the stable branch:

    portmaster -o net-mgmt/nagios net-mgmt/nagios-devel

  or, if you're using portupgrade:

    portupgrade -o net-mgmt/nagios net-mgmt/nagios-devel

20080902:
  AFFECTS: users of math/ploticus
  AUTHOR: linimon@FreeBSD.org

  This is a major update.

  Deprecated: server-side image maps (use client-side instead); definition
  of categories within proc areadef (use proc categories instead); proc print.

  Discontinued attributes: proc processdata's stack; proc usedata's element,
  proc getdata's rotate, and proc defineunits (use the $changeunits()
  function instead).

  proc rangebar has been renamed proc boxplot and there are major
  functionality changes.  Any script that uses proc rangebar will need
  maintenance.

  See http://ploticus.sourceforge.net/doc/news.html for more information.

20080901:
  AFFECTS: users of mail/pine4 and editors/pico
  AUTHOR: dougb@FreeBSD.org

  These two ports have been removed in favor of the new mail/alpine and
  editors/pico-alpine ports.  UW discontinued work on Pine in September
  2005 and is focusing on Alpine now.  You should be able to directly
  replace pine with alpine.

  See http://www.washington.edu/alpine/ for more information.

20080831:
  AFFECTS: users of net-mgmt/smokeping
  AUTHOR: lth@FreeBSD.org

  Smokeping has been updated to 2.4.1, and the example web server
  configuration has changed.  Please read pkg-message and check that
  your server configuration is OK.

20080827:
  AFFECTS: users of devel/git
  AUTHOR: wxs@FreeBSD.org

  With the default Makefile settings, most of the programs are now
  installed outside your $PATH, except for "git", "gitk", and some server
  side programs that need to be accessible for technical reasons.  Invoking
  a git subcommand as "git-xyzzy" from the command line has been deprecated
  since early 2006 (and officially announced in 1.5.4 release notes); use
  of them from your scripts after adding output from "git --exec-path" to
  the $PATH is still supported in this release, but users are again
  strongly encouraged to adjust their scripts to use "git xyzzy" form, as
  we will stop installing "git-xyzzy" hardlinks for built-in commands in
  later releases.

  Please see this URL for more information:
  http://www.kernel.org/pub/software/scm/git/docs/RelNotes-1.6.0.txt

20080827:
  AFFECTS: users of mail/qmhandle
  AUTHOR: garga@FreeBSD.org

  A qmHandle.conf file was created, for now, is not needed to edit
  ${PREFIX}/bin/qmHandle to change stopqmail and startqmail variables.
  Just remember to edit configuration file after upgrade.

20080820:
  AFFECTS: users of www/p5-Apache-DBI
  AUTHOR: pgollucci@FreeBSD.org

  www/p5-Apache-DBI has been forked into a MASTER and SLAVE setup
  www/p5-Apache-DBI-mp1 and www/p5-Apache-DBI-mp2 so as to work with
  www/rt38 among possibly other ports.

20080820:
  AFFECTS: users of net/rabbitmq
  AUTHOR: pneumann@gmail.com

  The database schema has changed in this version of RabbitMQ.  If you
  attempt to start RabbitMQ-1.4.0 over top of a previous installation,
  it will fail, citing "schema_integrity_check_failed".  To correct this,
  delete your mnesia directory (/var/db/rabbitmq/mnesia) and restart
  the server.  Note that this will destroy all your durable exchanges and
  queues, and all your persisted messages!

20080816:
  AFFECTS: users of mail/assp
  AUTHOR: J.R. Oldroyd <fbsd@opal.com>

  The periodic(8) script no longer outputs to files in the assp directory.
  You should remove /var/db/assp/nightly.log and nightly.log.old by hand
  once you are done with them.  The information that was stored there will
  now come in your nightly system email.

20080815:
  AFFECTS: users of sysutils/rdiff-backup
  AUTHOR: vd@FreeBSD.org

  sysutils/rdiff-backup has been upgraded from 1.0.5 to 1.2.0.  This is
  an incompatible upgrade.  If you need the "old" 1.0.5, you can find it
  in sysutils/rdiff-backup10.

20080813:
  AFFECTS: users of www/ikiwiki
  AUTHOR: brix@FreeBSD.org

  The layout of the ikiwiki.setup file has changed in a significant
  way in this release.  Old setup files will continue to work, but new
  features, like the new websetup interface, require a new format
  setup file.  You can convert old setup files into the new format by
  running the following command for all your ikiwiki.setup files:

    ikiwiki-transition setupformat ikiwiki.setup

20080812:
  AFFECTS: users of mail/spamdyke
  AUTHOR: mm@FreeBSD.org

  The spamdyke port has been updated to 4.0.2.  The new version is not
  backwards compatible with previous versions.  Please examine the new
  configuration file for the changes.

20080812:
  AFFECTS: users of databases/pgbouncer
  AUTHOR: mm@FreeBSD.org

  Starting with port version 1.2.3, pgbouncer does not run as root anymore.
  If you are upgrading from earlier versions, please update your configuration
  in ${PREFIX}/etc/pgbouncer.ini to use log and pid file paths owned by the
  newly created pgbouncer user (or customize for a different user yourself).

  Default logfile: /var/log/pgbouncer/pgbouncer.log
  Default pidfile: /var/run/pgbouncer/pgbouncer.pid

20080808:
  AFFECTS: users of chinese/phpbb-tw
  AUTHOR: chinsan@FreeBSD.org

  The default install directory for phpbb-tw has changed from
  ${PREFIX}/www/data/phpBB2 to ${PREFIX}/www/phpBB2.

  If you are updating from a previous version, to preserve your settings
  and data, please do the following:

    mv /usr/local/www/data/phpBB2 /usr/local/www

  Then update as usual.

20080806:
  AFFECTS: users of net-p2p/transmission
  AUTHOR: mezz@FreeBSD.org

  Update to 1.3x, the net-p2p/transmission now is a meta-port. It depends on
  cli, daemon, and gtk2. If you don't want that, uninstall transmission and
  install net-p2p/transmission-cli by doing:

    portmaster -o net-p2p/transmission-cli net-p2p/transmission

  or, if you're using portupgrade:

    portupgrade -o net-p2p/transmission-cli net-p2p/transmission

20080805:
  AFFECTS: users of devel/qt4
  AUTHOR: kde@FreeBSD.org

  The qt4 ports has been updated to 4.4.1.  With this update several ports
  specific problems have been fixed.  Qt4 headers and libraries have been
  moved to include/qt4 and lib/qt4.  bsd.qt.mk defines QT_INCDIR and
  QT_LIBDIR now, which could be used in qt4-dependent ports if required.
  Before you start to update your ports, please force update of qmake4 and
  qt4-corelib ports.  Portmaster users can do:

    portmaster devel/qmake4 devel/qt4-moc devel/qt4-corelib

  or, if you're using portupgrade:

    portupgrade -f devel/qmake4 devel/qt4-moc devel/qt4-corelib

20080804:
  AFFECTS: users of devel/git
  AUTHOR: wxs@FreeBSD.org

  Git's cvsps dependency has been switched from cvsps-devel to cvsps.  The
  two are incompatible, so you will need to do the following before
  upgrading git:

    portmaster -o devel/cvsps devel/cvsps-devel

20080728:
  AFFECTS: users of net/freeradius2
  AUTHOR: David Wood <david@wood2.org.uk>

  Upgrading the FreeRADIUS port used to replace all unmodified files
  in your configuration with the latest version from the sample
  configuration. This strategy has two disadvantages; over time your
  configuration became based on different versions of the sample
  configuration, also major changes to the sample configuration could
  leave your configuration in a confusing state.

  From version 2.0.5, your configuration is not touched if any
  configuration files have been modified.

  You are recommended to track changes in the sample configuration and
  keep your configuration in a version control system. I use Subversion
  (see the devel/subversion port) to track my changes. Keeping the sample
  configuration in a 'vendor branch' (see the Subversion book for more
  details) allows easy merging of changes from the sample configuration.

  *** IMPORTANT ***

  You are urged to move your configuration out of the default location
  (/usr/local/etc/raddb) before upgrading from 2.0.4 (or earlier)
  to 2.0.5 (or later). Once this upgrade is complete, remove the sample
  configuration that has been installed in the default location and
  move your configuration back to the default location.

  This is a one time procedure that will prevent unmodified files in
  your configuration from being deleted from your configuration and not
  restored during the upgrade. No customised files will be lost in any
  circumstances.

  The sample configuration in 2.0.5 has been reorganised: the
  configuration of most modules is now in the modules directory rather
  than in radiusd.conf. You are urged to rearrange your configuration
  to match this layout.

  There are several improvements in this version of the port, including
  a new pkg-message that will help new FreeRADIUS users to get started
  with the port, also new 'reload' and 'debug' commands for the rc.d
  script. Enjoy!

20080725:
  AFFECTS: users of x11-fm/nautilus and misc/shared-mime-info
  AUTHOR: gnome@FreeBSD.org

  In order to properly update x11-fm/nautilus and misc/shared-mime-info, do
  the following using portupgrade:

    # pkg_deinstall -fO nautilus
    # portupgrade shared-mime-info
    # portinstall -O nautilus

  Once misc/shared-mime-info has been updated, each user will need to run
  the following command:

    $ update-mime-database ~/.local/share/mime/

20080725:
  AFFECTS: users of www/ojs2
  AUTHOR: Greg Larkin <glarkin@FreeBSD.org>

  If you are upgrading from a prior version of ojs2, please backup your
  database, uploaded files directory, and your config.inc.php before the
  upgrade.  Read /usr/local/share/docs/ojs2/UPGRADE or visit
  http://pkp.sfu.ca/ojs/UPGRADE for additional upgrade information.

20080721:
  AFFECTS: users of net/freenet6
  AUTHOR: Edwin Groothuis <edwin@mavetju.org>

  Please note that there has been a major update of this port (from
  version 2.x to 5.x) and that the name of the binaries and configuration
  files has changed from "tpsc" to "gw6c". The configuration files
  have to be copied from ${PREFIX}/share/examples/freenet6 to
  ${PREFIX}/etc again.

20080719:
  AFFECTS: users of x11-fm/gprename
  AUTHOR: Martin Tournoij <carpetsmoker@rwxrwxrwx.net>

  GPRename configuration files now live ~/.config/gprename instead of ~/, to
  upgrade use the following commands:

    % mkdir -p ~/.config/gprename
    % mv ~/.gprename ~/.config/gprename/gprename
    % mv ~/.gprename_log ~/.config/gprename/gprename_log

20080717:
  AFFECTS: users of devel/anjuta
  AUTHOR: gnome@FreeBSD.org

  Anjuta's neon dependency has been switched from neon26 to neon28.  The
  two are incompatible, so you will need to do the following to upgrade:

    portupgrade -o www/neon28 neon26
    portupgrade anjuta

20080714:
  AFFECTS: users of www/squid
  AUTHOR: Thomas-Martin Seck <tmseck@web.de>

  www/squid has been updated to Squid 2.7.STABLE3.

  The update should be rather straightforward.

  The only noticeable change in the port is that the ICAP patch is no
  longer included; this is because this patch was unmaintained for a long
  time and its use was not really recommended.  Please consider moving to
  Squid-3 (currently available as www/squid30) if you need ICAP support.

  Squid 2.6 is still available as www/squid26 and will probably be removed
  from the Ports Tree by the end of 2008.

20080712:
  AFFECTS: users of databases/rrdtool
  AUTHOR: rafan@FreeBSD.org

  If you use language bindings, like the Perl's RRDs, please upgrade
  this port *twice* in order to get the library dependency right.

20080711:
  AFFECTS: users of x11-toolkits/gtkdatabox2
  AUTHOR: Beech Rintoul <beech@FreeBSD.org>

  The port has been deprecated and gtkdatabox has been updated. This was
  done so the port tracks vendor name. Please update by doing:

    portupgrade -o x11-toolkits/gtkdatabox x11-toolkits/gtkdatabox2

20080709:
  AFFECTS: users of www/ikiwiki
  AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>

  The IkiWiki editpage form now uses the raw page name, not the page title,
  in its `page' CGI parameter.  You will need to rebuild any existing
  IkiWiki installations in order to update their `edit' links to the new
  format.

20080708:
  AFFECTS: users of emulators/qemu-devel
  AUTHOR: nox@FreeBSD.org

  The port has been updated to a 20080620 SVN snapshot, which uses the
  new (incompatible) kqemu-kmod-devel port that now also works for the
  32 bit "qemu" executable on amd64.  If you upgrade qemu-devel with the
  KQEMU knob on, you have to

    # pkg_delete kqemu-kmod-1\*

  the old kqemu version first if it is installed.

20080705:
  AFFECTS: users of www/ikiwiki
  AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>

  The IkiWiki search plug-in now uses www/xapian-omega as backend instead
  of textproc/hyperestraier.  You will need to update the configuration of
  any search enabled IkiWiki installations and rebuild them since the
  search form has changed.

20080704:
  AFFECTS: users of misc/shared-mime-info
  AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org>

  The misc/shared-mime-info has been updated to 0.40. The Mime Types caches
  have been changed a bit. If you have created any custom MIME types, you
  will need to run update-mime-database to update your local Mime Types
  caches:

    $ update-mime-database ~/.local/share/mime/

20080702:
  AFFECTS: users of irc/ratbox-services
  AUTHOR: Beech Rintoul <beech@FreeBSD.org>

  Configuration file and database changes have been made between the
  1.1.x series and the current release version of ratbox-services.

  It is highly recommended that services are stopped, and the proper
  upgrade procedure is followed as described in port's documentation,
  before restarting newly updated ratbox-services again.

  Please remember to backup the database before attempting an
  upgrade, as incorrectly upgraded database may be rendered unusable.

  The ratbox-services-1.2.x branch implements multi-language support.
  However, an inconsistency in the language indexing may result in
  errors. It is therefore recommended that the English default to be
  used until the next version release.

20080702:
  AFFECTS: users of mail/nocc
  AUTHOR: Alex Dupre <ale@FreeBSD.org>

  The Nocc configuration file has been moved into 'config' subdir.
  When updating, remove the old conf.php file and reconfigure Nocc.

20080701:
  AFFECTS: users of devel/subversion*
  AUTHOR: Lev Serebryakov <lev@FreeBSD.org>

  subversion now uses neon-0.28.x (www/neon28) port, and automatic
  portupgrade will fail because www/neon28 will conflict with installed
  www/neon26 port.

  You should upgrade neon library before subversion with the command:

    # portupgrade -o www/neon28 neon26

  Also, if you use any special subversion ports with bindings, you
  should upgrade these ports to clean subversion port with

    # portupgrade -o devel/subversion subversion-\*

  and install needed bindings (p5-subversion, py-subversion and/or
  ruby-subversion) after that.

  If you use subversion with bindings installed from devel/subversion
  with custom options, don't forget to install separate bindings ports
  after subversion upgrade.

20080630:
  AFFECTS: users of graphics/cairo, graphics/poppler*, and future users of www/firefox3
  AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org>

  The poppler* ports have been updated to 0.8.3 and the shared libraries
  have changed.  Firefox 3.0 has been added to the tree as www/firefox3.
  These changes require that all dependent ports be updated.  You can do
  this in one of two ways:

    # portmaster pixman
    # portmaster \*cairo\*
    # portmaster -r poppler-0

  or:

    # pkgdb -Ff
    # portupgrade pixman\* \*cairo\*
    # portupgrade -r poppler-0.\*

20080627:
  AFFECTS: users of x11-drivers/xf86-video-ati
  AUTHOR: Jung-uk Kim <jkim@FreeBSD.org>

  mach64 and r128 drivers are now separated out from the ati driver.
  These video cards are supported by x11-drivers/xf86-video-mach64
  and x11-drivers/xf86-video-r128 respectively. If you have one of
  the affected video cards and xorg.conf contains the following line:

    Driver  "ati"

  you must specify "mach64" or "r128". Alternatively, you may install
  x11-drivers/xf86-video-ati to get a wrapper driver.

20080626:
  AFFECTS: users of science/gramps
  AUTHOR: Anders Troback <freebsd@troback.com>

  Before you upgrade from 2.x to 3.x you need to export your existing
  databases to a GRAMPS XML file. After the upgrade you can import
  them into the new version.

20080624:
  AFFECTS: users of irc/ircd-ratbox-devel
  AUTHOR: Beech Rintoul <beech@FreeBSD.org>

  Upgrading between different beta releases can cause problems when
  changes to the ban database schema have occurred.  The 'bantool'
  utility now comes with a -u switch that will check and update the
  ban database as necessary.

  Issuing 'bantool -u' is required when upgrading between beta releases
  and must not be done while the ircd is running.

20080624:
  AFFECTS: users of www/mod_security
  AUTHOR: Marcelo Araujo <araujo@FreeBSD.org>

  The mod_security port has been updated from 1.9.4 to 2.5.5. Branch 1.9.x
  will not receive any further updates; all users must update mod_security
  port to versions 2.1 or 2.5.

  You can get more information about update issues at:

    http://www.modsecurity.org/documentation/

20080624:
  AFFECTS: users of www/opera and www/opera/devel
  AUTHOR: Ion-Mihai Tetcu <itetcu@FreeBSD.org>

  The Opera port has been updated from 9.2x to 9.5x.  A lot of things have
  been changed such as keyboard shortcuts[1]; new storage and indexing
  formats for mail and feeds; new search.ini; native amd64 binaries; no 4.x
  support.  You will be asked whether to convert mail and feeds to new
  format during start up.  Warning: there is no way to downgrade back to
  the old format.  Be sure to see the Changelog[2].

  [1] http://www.opera.com/support/search/view/884/
  [2] http://www.opera.com/docs/changelogs/freebsd/950/

20080622:
  AFFECTS: users of devel/subversion, subversion-devel and subversion-freebsd
       with apr from www/apache22
  AUTHOR: Clement Laforet <clement@FreeBSD.org>

  apr and apr-util bundled with apache 2.2.9 have been upgraded to 1.3.x, so
  shared libraries' versions have been bumped. If you are using subversion
  with apache22 apr, you must rebuild subversion after the update.

20080617:
  AFFECTS: users of editors/nvi-devel
  AUTHOR: Wesley Shields <wxs@FreeBSD.org>

  editors/nvi-devel has been changed to install nvi, nex, and nview as
  to not conflict with editors/2bsd-vi.  Please note the new names if
  you use this port.

20080616:
  AFFECTS: users of mail/dkim-milter
  AUTHOR: Hirohisa Yamaguchi <umq@ueo.co.jp>

  Most of the command line options can now be set in configure files.
  So the default values (such as milterdkim_socket) are changed to blank.
  Upgrading users should check the values both in rc.conf and
  dkim-filter.conf.

20080612:
  AFFECTS: users of www/linux-opera
  AUTHOR: mezz@FreeBSD.org

  The Opera port has been updated from 9.2x to 9.5x.  A lot of things have
  been changed such as keyboard shortcuts[1]; new storage and indexing
  formats for mail and feeds; new search.ini; probably more that I have
  missed.  I do not know if the keyboard shortcuts and search.ini will be
  overwritten.  You will be asked whether you want mail and feeds to be
  converted to new format during start up.  Warning: there is no way to
  downgrade back to the old format.  Be sure to see the Changelog[2].

  [1] http://www.opera.com/support/search/view/884/
  [2] http://www.opera.com/docs/changelogs/linux/950/

  It is probably best for you to back up your linux-opera directory in
  case until you have no problem with new Opera for a while.  Also, you
  might have to re-configure search and keyboard shortcuts if these were
  overwritten:

    # cp -Rp ~/.linux-opera ~/.linux-opera-bak

  If you are seeing an error of undefined symbols related to GTK+, it is
  because it needs newer linux-gtk2 that ports doesn't have. You can enter
  'opera:config#FileSelector|DialogToolkit' in the address bar and change
  from 0 to 1 in 'Dialog Toolkit' if it annoys you.  0 = auto detection,
  1 = QT, and 2 = GTK+.

20080610:
  AFFECTS: users of mail/svnmailer
  AUTHOR: pgollucci@FreeBSD.org

  Some of the config directives and sections allowed have changed.  You will
  have to edit your config file when updating to 1.1.0-dev-r1373 version of
  the port.  Please see the following URL for more information:

  http://opensource.perlig.de/en/svnmailer/doc-1.1/#general-config-charset

20080609:
  AFFECTS: users of devel/pear-Date_Holidays
  AUTHOR: tabthorpe@FreeBSD.org

  pear-Date_Holidays has been split into multiple subports. If you want
  a specific geographic region, look at devel/pear-Date_Holidays_*

20080605:
  AFFECTS: users of audio/paman and audio/pavucontrol
  AUTHOR: lippe@FreeBSD.org

  paman was renamed to pavucontrol, which are two different projects.
  paman is a GTK frontend to PulseAudio, while pavucontrol is a GTK-based
  volume control tool to PulseAudio.

20080605:
  AFFECTS: users of devel/gettext (i.e.: YOU)
  AUTHOR: ade@FreeBSD.org

  As a result of the upgrade to gettext-0.17, the shared library version
  of libintl has changed, so you will need to rebuild all ports that
  depend on gettext:

    # portupgrade -rf gettext
    # portmaster -r gettext

  Given the scope and sheer number of dependent ports, it may be more
  advisable to simply blow away all existing install ports (after
  keeping any local configuration changes), and rebuilding from scratch.

20080603:
  AFFECTS: users of editors/emacs
  AUTHOR: Yasuhiro KIMURA <yasu@utahime.org>

  The port (editors/emacs) is updated to 22.2 and some of Emacs Lisp
  directories had changed.  So you should reinstall all ports that depend
  on it.  Please do something like:

    # portupgrade -fr emacs

20080601:
  AFFECTS: users of www/ikiwiki
  AUTHOR: brix@FreeBSD.org

  If password based logins is enabled in IkiWiki, those passwords were
  stored in cleartext in the userdb.  To guard against exposing users'
  passwords, IkiWiki 2.48 and later use strong (blowfish) hashes for
  storing passwords.

  To hash existing passwords, update to ikiwiki-2.48 and run the
  following command for each of your IkiWiki src dirs:

    ikiwiki-transition hashpassword /path/to/your/wiki/srcdir

20080524:
  AFFECTS: users of net-im/jabberd
  AUTHOR: mm@FreeBSD.org

  Starting with version 2.2.0, resolver is now built in the S2S component.
  Jabberd configuration files require updating:

    jabberd.cfg: resolver component must be removed
    s2s.xml: <lookup> section must be added (see s2s.xml.dist)
    resolver.xml: may be deleted (file not required anymore)

20080519:
  AFFECTS: users of www/nginx and www/nginx-devel
  AUTHOR: osa@FreeBSD.org

  Nginx version lines have been changed: 0.5 -> 0.6 for stable and
  0.6 -> 0.7 for development version.  Make sure your configuration
  files are compatible with the new version(s).

20080519:
  AFFECTS: users of irc/bitlbee
  AUTHOR: brix@FreeBSD.org

  The default installation is now configured for running bitlbee as
  user 'bitlbee'.  Make sure any existing configuration files are
  readable by that user.

20080517:
  AFFECTS: users of multimedia/smplayer-*
  AUTHOR: miwi@FreeBSD.org

  The slave port multimedia/smplayer-qt4 has been removed with the upgrade
  of multimedia/smplayer to 0.6.0, qt3 is no longer supported. They are now
  fully integrated into multimedia/smplayer.

  Please uninstall multimedia/smplayer-qt4 port before upgrading
  multimedia/smplayer to version 0.6.0 or higher.

20080513:
  AFFECTS: users of security/amavisd-new
  AUTHOR: scheidell@secnap.net

  Amavisd-new 2.6.0 introduces several incompatibilities with prior versions.
  If you are upgrading from 2.5.4 or earlier, you will need to update your
  SQL schema.  If you have third party programs that access SQL tables, you
  will need to update those also.

  COMPATIBILITY WITH 2.5.4:

  - when using SQL for logging (e.g. for a pen pals feature) or for
    quarantining, SQL tables tables maddr, msgs, msgrcpt and quarantine need
    to be extended by a new field 'partition_tag';  see below for details;

  - when SQL logging (pen pals) or SQL lookups are used, one can choose a
    binary or a character data type for fields users.email, mailaddr.email,
    and maddr.email; now may be a good opportunity to change a data type
    to binary (string of bytes);  see below for details;

  - when using SQL for logging, a default for $sql_clause{'upd_msg'}
    has changed, so if a configuration file replaces this SQL clause
    by a non-default setting, it needs to be updated;

  Full information in /usr/local/share/doc/amavisd-new/RELEASE_NOTES.

20080513:
  AFFECTS: users of audio/ampache
  AUTHOR: jadawin@FreeBSD.org

  Ampache 3.4 uses a different config parser.  Unfortunately the new parser
  is unable to read old config files.  In order to migrate your current
  configuration, you should run `php ${WWWDIR}/bin/migrate_config.inc' from
  the command line.

20080508:
  AFFECTS: users of databases/ptop
  AUTHOR: beech@FreeBSD.org

  The authors have changed the name of this utility to `pg_top'.  To avoid
  conflict with another port in the Tree with the same name we have retained
  `ptop' as the portname.  Note that binary has also changed to `pg_top'.
  Please start the utility with that name after updating.

20080507:
  AFFECTS: Perl interface users of audio/gramofile
  AUTHOR: rafan@FreeBSD.org

  Perl support is removed due to devel/swig11 removal in ports.  If you use
  the Perl interface, you are encouraged to use the new Audio::Gramofile
  found on CPAN (contact me for the ports).

20080506:
  AFFECTS: users of net-mgmt/collectd
  AUTHOR: daniel@roe.ch

  Previously, net-mgmt/collectd used to remove the config file even if it
  was changed by the user. This has now been fixed.

  To upgrade without losing your configuration, copy
  ${PREFIX}/etc/collectd.conf away to a safe place before upgrading
  net-mgmt/collectd.

  In addition, the default location of the data files changed from
  ${PREFIX}/var/lib/collectd to /var/db/collectd; you may want to move your
  data files and edit your configuration accordingly.

20080503:
  AFFECTS: users of net/skype-devel
  AUTHOR: beech@FreeBSD.org

  Skype-devel port has been removed in favor and by upading of net/skype.
  If you are running skype-devel, please do the following:

    portupgrade -o net/skype net/skype-devel

20080426:
  AFFECTS: users of www/phpgedview
  AUTHOR: beech@FreeBSD.org

  The install location of phpgedview has changed from www/data/phpGedView to
  www/phpgedview.  If you are updating from a previous version please do
  the following:

    mv /usr/local/www/data/phpGedView /usr/local/www

  You will also need to adjust the paths in your web server to reflect the
  new location.

20080416:
  AFFECTS: users of security/clamav
  AUTHOR: garga@FreeBSD.org

  Clamav 0.93 does not support the daily.inc and main.inc directories format
  for virus databases.  You need to remove these directories manually and
  force freshclam to get new cvd format files before starting clamd:

    portupgrade clamav
    /usr/local/etc/rc.d/clamav-clamd stop
    /usr/local/etc/rc.d/clamav-freshclam stop
    rm -rf /var/db/clamav/main.inc /var/db/clamav/daily.inc
    freshclam
    /usr/local/etc/rc.d/clamav-freshclam start
    /usr/local/etc/rc.d/clamav-clamd start

20080408:
  AFFECTS: users of www/p5-Apache-Test
  AUTHOR: pgollucci@FreeBSD.org

  www/p5-Apache-Test doesn't actually need www/mod_perl{1,2}. If you would
  like to test a mod_perl, than please install www/mod_perl2 or www/mod_perl
  as well. The ports infrastructure doesn't support this (yet) but you can
  use it to test www/apache13, www/apache20, and/or www/apache22 without
  chaining www/p5-Apache-Test.

20080405:
  AFFECTS: users of sysutils/tracker
  AUTHOR: ahze@FreeBSD.org

  The sysutils/tracker port is now a meta port and tracker is now split into
  separate ports to allow non-GNOME users to install tracker without pulling
  in GNOME components. To upgrade please use the directions below.

  Portmaster users:
    portmaster -o sysutils/tracker-client tracker
    portmaster sysutils/tracker

  Portupgrade users:
    portupgrade -o sysutils/tracker-client tracker
    portupgrade -u sysutils/tracker

20080405:
  AFFECTS: users and maintainers of ports that depend on databases/sqlite3
  AUTHOR: mnag@FreeBSD.org

  Port databases/sqlite3 was updated to 3.5.6 and now has threads enabled
  by default.  If you encounter any problem with it, you can rebuild SQLite3
  without threads and test or change Makefile of affected port with this:

    sed -i.bak -E -e "s|USE_SQLITE=.*|USE_SQLITE=34|g" \
        -e "s|databases/sqlite3|databases/sqlite34|g" Makefile

  Please report success or failure to port maintainer and to me.

20080403:
  AFFECTS: users of emulators/qemu and emulators/qemu-devel
  AUTHOR: nox@FreeBSD.org

  The default configuration location (qemu-ifup script etc.) has been
  changed from /etc to ${PREFIX}/etc (usually /usr/local/etc).  Move your
  files accordingly.

20080330:
  AFFECTS: users of www/mediawiki
  AUTHOR: miwi@FreeBSD.org

  www/mediawiki version is 1.12 now. 1.11 version was preserved on
  www/mediawiki111 port.

20080329:
  AFFECTS: users of www/phpadsnew
  AUTHOR: beech@FreeBSD.org

  Phpadsnew has been replaced with www/openx.
  To upgrade please do the following:

  1. Install www/openx
  2. Copy the configuration file from phpadsnew to the var directory of
     www/openx
  3. Copy your banner images from phpadsnew/www/images to openx/www/images
  4. Access openx on your browser and follow the instructions for upgrading
  5. When you are satisfied with everything working properly you can remove
     www/phpadsnew

20080326:
  AFFECTS: users of emulators/linux_base-f8
  AUTHOR: bsam@FreeBSD.org

  The new port is used just like emulators/linux_base-fc6.  Please, read
  carefully entry 20070327 about emulators/linux_base-fc6.

20080323:
  AFFECTS: users of multimedia/gstreamer
  AUTHOR: multimedia@FreeBSD.org

  Gstreamer port was updated.  Due to the move of some plugins between
  ports, you will have to rebuild the gstreamer-plugins-good port after
  upgrading.

  Portupgrade users:
    # portupgrade -a
    # portupgrade -f gstreamer-plugins-good

  Portmaster users:
    # portmaster -a
    # portmaster gstreamer-plugins-good

20080323:
  AFFECTS: all GNOME users and ports depend on misc/gnomehier
  AUTHOR: gnome@FreeBSD.org

  GNOME has been updated to 2.22.0.  You have to deinstall a few ports first
  before using portupgrade or portmaster in order to successfully upgrade
  your GNOME installation.

  Portupgrade users:
    # pkgdb -Ff
    # pkg_deinstall -fO gnome-applets\* totem\* gnome-control-center\*
    # portupgrade -aOW

  Portmaster users:
    # pkg_delete -f gnome-applets\* totem\* gnome-control-center\* \
      gnome-keyring-manager\*
    # portmaster -a

  Be sure to read in our known issues and solutions:

    http://www.freebsd.org/gnome/docs/faq222.html#q4

20080323:
  AFFECTS: users of devel/glib20 and future users of devel/gio-fam-backend
  AUTHOR: gnome@FreeBSD.org

  In order to update to glib 2.16 or higher, you must first update the
  glib20 port on its own or you will get a failure trying to install
  devel/gio-fam-backend saying it cannot find -lgio-2.0.  Portmaster users
  can do:

    portmaster glib-2

  or, if you're using portupgrade:

    portupgrade glib-2\*

20080318:
  AFFECTS: users of audio/gnump3d
  AUTHOR: jadawin@FreeBSD.org

  The layout of gnump3d 3.0 is changed, please read documentation and the
  manual pages of gnump3d.

20080318:
  AFFECTS: users of net/skype net/skype-devel
  AUTHOR: beech@FreeBSD.org

  For FreeBSD versions 7.0 and above:

  It is required with both skype and skype-devel to update to linux_base-fc6.
  Please do the following:

  1. Make sure there are no running Linux applications.
  2. Unmount linprocfs (umount /compat/linux/proc)
  3. Uninstall your current linux_base port
  4. Set appropriate sysctl (sysctl compat.linux.osrelease=2.6.16)
  5. Install emulators/linux_base-fc6
  6  Remount linprocfs (mount /compat/linux/proc)
  7. Add compat.linux.osrelease=2.6.16 to etc/sysctl.conf
  8. Add OVERRIDE_LINUX_BASE_PORT=fc6 to /etc/make.conf

  Note: These instructions also apply to linux_base-f8, please use the same
  osrelease.

  For FreeBSD versions 5.X and 6.X:

  Please use the legacy version net/skype12:

    portupgrade -o net/skype12 net/skype

20080316:
  AFFECTS: users of net/iscsi-target
  AUTHOR: rafan@FreeBSD.org

  The default configuration location has been changed from /etc to
  ${PREFIX}/etc. Move your files accordingly.

20080314:
  AFFECTS: users of security/nmapfe
  AUTHOR: miwi@FreeBSD.org

  nmapfe has been renamed to zenmap upstream. The port has also been
  renamed. If you haven't already installed nmapfe, you need to:

    portupgrade -o security/zenmap nmapfe\*

20080313:
  AFFECTS: users of mail/ezmlm-web
  AUTHOR: hans@nordhaug.priv.no

  The layout of ezmlm-web 3.2 is changed, please read documentation and
  the manual page of ezmlm-web.cgi.

20080312:
  AFFECTS: users of x11-wm/enlightenment-devel, x11/ecore and grephics/evas
  AUTHOR: stas@FreeBSD.org

  Evas and ecore ports have been split to separate modules to simplify
  dependency tracking. Thus, portupgrade in many cases won't be able to
  correctly update these ports.

  The easiest upgrade path would be to remove all EFL ports and install
  them from scratch. At least, you should reinstall ecore and evas.

  Please note that your old $HOME/.e is no longer compatible with new
  snapshot version. You will need to remove this directory and let e17
  create it automatically on the next startup.

20080306:
  AFFECTS: users of mail/dovecot
  AUTHOR: ehaupt@FreeBSD.org

  The update to version 1.0.12 will require manual change to the active
  configuration file.

  mail_extra_groups setting was commonly used insecurely. This setting is now
  deprecated. Most users should switch to using mail_privileged_group setting,
  but if you really need the old functionality use mail_access_groups instead.

20080303:
  AFFECTS: users of security/gnutls and any port that depends on it
  AUTHOR: novel@FreeBSD.org

  gnutls has been updated to 2.2.2 and all shared libraries' versions have
  been bumped.  So you need to rebuild all applications that depend on
  gnutls. Do something like:

    portupgrade -rf gnutls

20080223:
  AFFECTS: users of www/instiki
  AUTHOR: beech@FreeBSD.org

  The default installation directory for instiki has changed from
  /usr/local/instiki to /usr/local/share/instiki.

  If you are updating from a previous version, to preserve your
  settings and data, please do the following:

    mv /usr/local/instiki /usr/local/share

  Then update as usual.

20080219:
  AFFECTS: users of x11-wm/xmonad
  AUTHOR: jacula@gmail.com

  From now XMonad uses a new configuration file system, so you don't have
  to edit Config.hs anymore.  Instead, create a custom configuration file
  ~/.xmonad/xmonad.hs.  You can take a look at some samples on Xmonad's
  website.  Note that you can be interested in x11-wm/xmonad-contrib.

20080218:
  AFFECTS: users of devel/poco and devel/poco-ssl
  AUTHOR: lippemail@gmail.com

  The HashFunction class template has been changed in an incompatible way.
  The member function formerly named hash() is now the function call
  operator.  If you have defined your own HashFunction classes, then you
  have to update your code.

20080216:
  AFFECTS: users of sysutils/symon
  AUTHOR: uspoerlein@gmail.com

  The symon port has been updated from 2.75 to 2.78. It changes the wire
  protocol again. You should update your symux(8) and symon(8) installations
  simultaneously, as:

    - new symon clients will make old symux servers exit, and
    - new symux servers don't understand the old symon client's if() and
      mem() probes.

20080208:
  AFFECTS: users of ports-mgmt/portupgrade
  AUTHOR: sem@FreeBSD.org

  As was claimed in the entry 20070301 below in this file, you should fill
  ALT_DEPENDS section of pkgtools.conf for portupgrade to work correctly
  with your alternative dependencies.  Now it is an obligatory requirement.

  It was done as a compromise between speed and complexity.

20080203:
  AFFECTS: users of www/xshttpd
  AUTHOR: johans@FreeBSD.org

  www/xshttpd now uses ${PREFIX}/www/xshttpd/ as a root directory for its
  data files.  The xshttpd configuration files have been moved to
  ${PREFIX}/www/xshttpd/conf/.  Please move the appropriate local files
  manually if you are upgrading from 3.4 or older versions.

20080202:
  AFFECTS: users of www/punbb
  AUTHOR: beech@FreeBSD.org

  Install paths have changed. Please do the following prior to upgrade:

    cd /usr/local/www
    mv punbb punbb.old
    cp -R punbb.old/upload punbb

  It is now safe to update as usual.

  Notes:

  * You will probably get uninstall errors regarding files not found. It's
    safe to ignore them
  * Your webserver path has changed from www/punbb/upload to www/punbb,
    please adjust your webserver configuration and restart it
  * When you are satisfied with everything working properly you may remove
    the punbb.old directory:
    rm -r /usr/local/www/punbb.old

20080201:
  AFFECTS: users of www/ziproxy
  AUTHOR: pankov_p@mail.ru

  The configuration file was moved from /usr/local/etc to
  /usr/local/etc/ziproxy.

20080126:
  AFFECTS: users of net-p2p/deluge
  AUTHOR: mezz@FreeBSD.org

  Deluge was updated to version 0.5.8.2.  If you are using blocklist plugin,
  you have to remove blocklist.conf first before you can run it, or it will
  crash upon start up.

    $ rm -f ~/.config/deluge/blocklist.conf

20080125:
  AFFECTS: users of www/mod_security2
  AUTHOR: araujo@FreeBSD.org

  Update of mod_security2 is a dramatic change, because there is a need
  to completely rewrite their obsolete rules and migrate for capacity to
  use new syntax.

  You are advised to make a complete backup of your configuration files
  before you can perform an update.

20080120:
  AFFECTS: users of www/apache20
  AUTHOR: clement@FreeBSD.org

  BDB framework provided by bsd.database.mk is now used by www/apache20
  port. WITH_BERKELEYDB knob is deprecated in favor of WITH_BDB and
  WITH_BDB_VER/WITH_BDB_BASE, see documentation for more details ('make
  show-options').

20080120:
  AFFECTS: users of www/apache22
  AUTHOR: clement@FreeBSD.org

  BDB framework provided by bsd.database.mk is now used by www/apache22
  port. WITH_BERKELEYDB knob is deprecated in favor of WITH_BDB and
  WITH_BDB_VER/WITH_BDB_BASE, see documentation for more details.
  ('make show-options').

20080118:
  AFFECTS: users of net/freeradius
  AUTHOR: David Wood <david@wood2.org.uk>

  FreeRADIUS 2.0 is now available as the net/freeradius2 port. All FreeRADIUS
  users are advised to consider upgrading to 2.0. It is the FreeRADIUS team's
  intention to put the 1.x server into 'maintenance' mode with just critical
  bug fixes.[1] 2.0 has many improvements including numerous bug fixes that
  were too difficult for the 1.x server, as well as many new features.

  Before uninstalling 1.x, it is recommended that you backup your
  configuration, which is typically in /usr/local/etc/raddb, then move it
  out of the way. It is also worth backing up the default configuration,
  which is typically in /usr/local/share/examples/freeradius/raddb.

  1.x configurations should work with the 2.0 server [2]. However the port
  automatically upgrades any unedited files in the configuration when you
  install a new version of FreeRADIUS. Installing 2.0 with the residue of a
  1.x configuration in the default location will result in a mixed 1.x and
  2.0 configuration that may not work.

  The recommended approach is to diff your 1.x configuration against the
  default 1.x configuration, then make corresponding changes to a copy
  of the default 2.0 configuration. If you moved your 1.x configuration out
  of the way before upgrading, you will have a 2.0 configuration ready to
  edit in the default location. It is worth reading man 5 unlang for details
  of the new FreeRADIUS 'un-language' before starting.

  Alternatively, you can move your 1.x configuration to another location,
  such as /usr/local/etc/raddb_v1, then edit /etc/rc.conf to point the rc.d
  script to that location. For example:

    radiusd_flags="-d /usr/local/etc/raddb_v1"

  I cannot guarantee that all 1.x configurations will work with the 2.0
  server, and I only recommend using a 1.x configuration as an interim
  measure.

    [1] - http://www.freeradius.org/business/roadmap.html
    [2] - http://preview.tinyurl.com/ysrr6a

20080114:
  AFFECTS: users of devel/perforce
  AUTHOR: lth@FreeBSD.org

  Perforce has been updated to version 2007.3. Upgrading is fairly
  straightforward, but it is still highly recommended to follow the
  upgrading instructions in the release notes:

    http://www.perforce.com/perforce/doc.073/user/relnotes.txt

20080108:
  AFFECTS: users of irc/bitlbee
  AUTHOR: brix@FreeBSD.org

  irc/bitlbee now stores saved user settings in /var/db/bitlbee/, not
  $PREFIX/etc/bitlbee/.  You will have to manually move any existing user
  settings to the new location (or override the user settings directory
  using -d if you wish to keep the old behavior).  Other configuration
  files are still kept in $PREFIX/etc/bitlbee/ by default.

  The default installation is now configured for running bitlbee as user
  'nobody' by default.  Make sure any existing configuration files are
  readable by that user.

20071225:
  AFFECTS: users of www/amphetadesk
  AUTHOR: lioux@FreeBSD.org

  www/amphetadesk has been updated to use the USE_RC_SUBR framework for
  rc.d scripts.  The rc.d script has been renamed from amphetadesk.sh to
  amphetadesk for consistency with other ports.

20071216:
  AFFECTS: users of net-mgmt/cacti
  AUTHOR: sem@FreeBSD.org

  From version 0.8.7a database settings has moved to config.php file.
  You have to copy your settings from db-settings.php to config.php and
  remove db-settings.php file after updating.

  Plugin support is dropped again and will not be revived anymore in the
  port.  A reason for that is the patch is unofficial and there are long
  time lags between a new cacti version released and time when the patch
  is adapted.

20071215:
  AFFECTS: users of www/suphp
  AUTHOR: koitsu@FreeBSD.org

  The suPHP port has been upgraded to 0.6.2.  This update requires
  modifications to your Apache httpd.conf, as the new version of suPHP does
  things differently than the previous version -- particularly in regards
  to how AddHandler is used.

  Previously, enabling suPHP was as simple as:

    suPHP_Engine on
    AddType application/x-httpd-php .php
    AddHandler x-httpd-php .php

  With suPHP 0.6.2, these should be changed to:

    suPHP_Engine on
    AddType application/x-httpd-php .php
    suPHP_AddHandler application/x-httpd-php

  If you forget this change, your PHP content will likely be offered as
  downloadable content and not parsed by the PHP interpreter!

  Additionally, the new version uses a configuration file vs. compile-time
  settings.  The configuration file is /usr/local/etc/suphp.conf, and a
  working example installed as /usr/local/etc/suphp.conf-example.  It's
  important that the MIME type under the [handlers] section matches what
  the type passed to suPHP_AddHandler in your Apache configuration.

20071101:
  AFFECTS: users of x11/nvidia-driver
  AUTHOR: danfe@FreeBSD.org

  There appears to be a conflict with xorg-server 1.4 and previous version
  of nvidia-driver: new xorg-server had plist change that made upgrading of
  nvidia-driver bomb out with the following error:

    ===>  Checking if x11/nvidia-driver already installed
    mv: rename /usr/local/lib/xorg/modules/libwfb.so to
    /usr/local/lib/xorg/modules/XXX-libwfb.so.%%.xorg-server-1.4_2,1:
    No such file or directory
    *** Error code 1

  To remedy the situation, deinstall any instance of nvidia-driver you might
  have, then reinstall xorg-server, e.g.:

    # cd /usr/ports/x11-servers/xorg-server
    # make install -DFORCE_PKG_REGISTER

  After that, new nvidia-driver will install cleanly.

20071101:
  AFFECTS: users of net/skype-devel
  AUTHOR: beech@FreeBSD.org

  The skype-devel port has been upgraded to version 1.4.0.118. This requires
  a sysctl change to run. After upgrading, please do:

    sysctl compat.linux.osrelease=2.4.20

  from a terminal. You can also add "compat.linux.osrelease=2.4.20" to your
  /etc/sysctl.conf to make this change permanent (at boot time).

20071030:
  AFFECTS: users of sysutils/daemontools
  AUTHOR: roam@FreeBSD.org

  If you were experiencing build problems on NFS when running daemontools's
  run-time testsuite, turn off the new TESTS option in the configure screen.
  On a related note, svscan can now send its error messages to multilog
  instead of readproctitle; see the etc/rc.d/svscan.sh startup script for
  more information on the svscan_* configurable variables.

20071029:
  AFFECTS: users of security/stunnel
  AUTHOR: roam@FreeBSD.org

  In the 4.21 update there are two major user-visible changes:
  - the stunnel binary is in ${PREFIX}/bin/, no longer in ${PREFIX}/sbin/;
  - the libstunnel library is in ${PREFIX}/lib/stunnel/ instead of lib/.

  You may need to adjust your PATH settings or your scripts to accommodate
  to the new location of the stunnel executable (and library, if there is
  actually anything using it).

20071024:
  AFFECTS: all GNOME users and ports depend on misc/gnomehier
  AUTHOR: gnome@FreeBSD.org

  GNOME has been updated to 2.20.1. All ports that depend on gnomehier have
  had their DATADIR moved from share/gnome/ to share/ (e.g.
  ${LOCALBASE}/share/gnome/ to ${LOCALBASE}/share/).
  This puts the FreeBSD GNOME ports more in line with the default GNOME
  installation hierarchy. To find the specific directories that have
  changed, see misc/gnomehier/files/dirlist. To upgrade your installed
  ports, you will need to use either ports-mgmt/portupgrade or
  ports-mgmt/portmaster.

    Portupgrade users:
    # pkgdb -Ff
    # portupgrade -f -o textproc/rarian textproc/scrollkeeper
    # portupgrade -a

    Portmaster users:
    # portmaster -o textproc/rarian textproc/scrollkeeper
    # portmaster -a

  If some of icons, applets, themes or other customized items have
  disappeared from your desktop in this upgrade, you will need to remove and
  re-add these items to make them appear again due to the DATADIR change.

20071024:
  AFFECTS: users of databases/mysql-connector-java
  AUTHOR: miwi@FreeBSD.org

  databases/mysql-connector-java version is 5.1.5 now. 5.0.8 version was
  preserved as databases/mysql-connector-java50 port.

20071009:
  AFFECTS: users of mail/vpopmail
  AUTHOR: roam@FreeBSD.org

  The vpopmail port has been upgraded to version 5.4.20.  There are several
  important changes that may affect your vpopmail installation and may need
  you to handle manually:

  - THE MYSQL CONNECTION INFORMATION IS NO LONGER DEFINED AT COMPILE-TIME!
    The WITH_MYSQL_{USER,PASSWD,SERVER,DB} variables should NOT be defined
    when you build the port; place that information in the vpopmail.mysql
    file after vpopmail has been installed!
  - the default domain is also no longer defined at compile time -- you need
    to place it in the defaultdomain file after the installation.
  - the defaultdomain and vpopmail.mysql files are no longer blindly removed
    on deinstallation, they are only removed if they have not been modified
  - in vpopmail 5.4.18, the database schema was changed -- some fields were
    extended from 64 to 96 characters.  If you do not apply those changes
    to your database, as explained in the vpopmail/doc/UPGRADE file, your
    vpopmail installation may silently fail or lose the trailing portions
    of domain names and usernames.
  - in vpopmail 5.4.19, the upstream authors integrated large parts of
    Alex Dupre's SpamAssassin support, without the SPAM_THRESHOLD part.
    If you use vpopmail along with the SpamAssassin FreeBSD port support,
    take extra care to ensure that your installation still processes
    e-mail messages in the same way.
  - vpopmail 5.4.19 added support for maildrop as a mail delivery agent.
    This is available in the FreeBSD port if WITH_MAILDROP is defined.
    There is also a new user-limit flag for maildrop delivery.
  - vpopmail 5.4.19 added support for MySQL connections via Unix sockets
    instead of TCP sockets to the server.  To do that, change the second
    value (the port number) in vpopmail.mysql to the full pathname of
    the MySQL socket (e.g. /tmp/mysql.sock).
  - vpopmail 5.4.20 extended the LDAP support; please see README.ldap for
    more information, and specify the LDAP connection information in
    the vpopmail/etc/vpopmail.ldap file after the installation.

20071008:
  AFFECTS: users of www/mediawiki
  AUTHOR: miwi@FreeBSD.org

  www/mediawiki version is 1.11 now. 1.10 version was preserved as
  www/mediawiki110 port.

20071008:
  AFFECTS: users of graphics/OpenEXR and graphics/ilmbase
  AUTHOR: nork@FreeBSD.org

  The new OpenEXR (1.6 and later) separated two libraries. The first is IlmImf
  library a.k.a. ILM's "EXR" file format operation library for storing 16-bit
  FP images. The others are Half, IlmThread, Imath and Iex a.k.a. ILM's basic
  utility libraries.

  To portupgrade OpenEXR and related ports, please do following operations,
  manually:

  # pkg_delete -f OpenEXR
  # pkg_delete -f ilmbase   (if you already installed before CONFLICT)
  # cd /usr/ports/graphics/OpenEXR
  # make install
  # pkgdb -F

20071008:
  AFFECTS: users of emulators/linux_base-fc7
  AUTHOR: bsam@FreeBSD.org

  Since Fedora is not more Core the port emulators/linux_base-fc7 is renamed
  to emulators/linux_base-f7.  Now it is Fedora 7.

20071007:
  AFFECTS: users of sysutils/nut sysutils/nut-*
  AUTHOR: Martin Matuska <mm@FreeBSD.org>

  The slave ports sysutils/nut-libupsclient, sysutils/nut-snmp and
  sysutils/nut-usb have been removed with the upgrade of sysutils/nut to 2.2.0
  They are now fully integrated into sysutils/nut and their functionality
  can be enabled/disabled in OPTIONS of sysutils/nut.

  Please uninstall all sysutils/nut-* slave ports before upgrading
  sysutils/nut to version 2.2.0 or higher.

20070930:
  AFFECTS: everyone
  AUTHOR: Mark Linimon <linimon@FreeBSD.org>

  The Ports Tree has been migrated to the latest version of autoconf,
  2.61.  Versions 2.53 and 2.59 were declared obsolete and removed.

  m4 was also updated to 1.4.10, but this proved to be incompatible and
  was rolled back to 1.4.9.  If you are experiencing 'Makefile: not found'
  errors, make sure you are not using 1.4.10.

20070928:
  AFFECTS: users of irc/ratbox-services
  AUTHOR: Lewis <moggie@elasticmind.net>

  Significant changes have been made between the 1.0.x series and the
  current release version of ratbox-services.

  It is highly recommended that services be stopped, and the proper upgrade
  procedure be followed as described in
  '/usr/local/share/doc/ratbox-services/', before restarting ratbox-services
  with the new release version.

  Please remember to backup the database before attempting an upgrade, an
  incorrectly upgraded database may be rendered unusable.

20070926:
  AFFECTS: users of devel/p5-gearmand
  AUTHOR: clsung@FreeBSD.org

  The port p5-gearmand has been split up, so Gearman servers can
  be embedded into other processes. The Gearman::Server class is
  located at devel/p5-Gearman-Server, if you have devel/p5-gearmand
  installed, perform an upgrade devel/p5-Gearman-Server with a
  command like:

    # portupgrade -o devel/p5-Gearman-Server devel/p5-gearmand

20070923:
  AFFECTS: users of emulators/linux_base-fc7
  AUTHOR: bsam@FreeBSD.org

  The new port is used just like emulators/linux_base-fc6. Please,
  read carefully entry 20070327 about emulators/linux_base-fc6.

20070921:
  AFFECTS: users of sysutils/grok
  AUTHOR: Wesley Shields <wxs@atarininja.org>

  The new version of grok has changed the meaning of a couple of
  pre-defined patterns.
  Please see /usr/local/share/doc/grok/CHANGELIST for more
  information. Existing grok.conf may be broken by these changes.

20070919:
  AFFECTS: users of net/samba3
  AUTHOR: timur@FreeBSD.org

  This is a cumulative update of net/samba3 from version 3.0.25a to
  3.0.26a. Detailed list of all the changes can be found here:

    http://www.samba.org/samba/history/samba-3.0.26a.html

  or in the WHATSNEW.txt file in the port's document directory.

  Short summary is:

  o Memory leaks in Winbind's IDMap manager.
  o CVE-2007-4138 -- Incorrect primary group assignment for domain
    users using the RFC 2307 or sfu winbind nss info plugin.
  o File sharing with Widows 9x clients.
  o Winbind running out of file descriptors due to stalled child
    processes.
  o MS-DFS inter-operability issues.
  o Offline caching of files with Windows XP/Vista clients.
  o Improper cleanup of expired or invalid byte range locks on files.
  o Crashes is idmap_ldap and idmap_rid.

  Bug #4715 (https://bugzilla.samba.org/show_bug.cgi?id=4715) is NOT
  fixed yet, although it won't core dump smbd process any more. Still,
  access to the shares other than UFS is not guaranteed.

  * USE SUCH SHARES AT YOUR OWN RISK *

20070918:
  AFFECTS: users of www/apache22
  AUTHOR: clement@FreeBSD.org

  By popular request, OPTIONS support has been added. When enabled
  (default), these knobs are ignored:

    WITH_<CATEGORY>_MODULES
    WITHOUT_<CATEGORY>_MODULES
    WITH_CUSTOM_<CATEGORY>
    WITH_MODULES
    WITHOUT_MODULES
    WITH_STATIC_MODULES

  However, you can disable OPTIONS by defining WITHOUT_APACHE_OPTIONS.

20070913:
  AFFECTS: users of x11/xorg, x11/nvidia-driver
  AUTHOR: flz@FreeBSD.org

  X.Org ports were updated to 7.3.  Since we're now using the modular
  build, the upgrade is pretty much painless.  If you're using the
  x11/xorg meta-port, upgrade should be as easy as:

    # portupgrade -R xorg

  Users of nvidia-driver will have to make sure Composite extension is
  turned off and start X with the following command:

    $ startx -- -ignoreABI

  The -ignoreABI option is an X option.  If you're using gdm, kdm or
  xdm, you will have to modify your configuration file so that X.Org
  starts with this option.

  An updated nvidia-driver should be released soon.

20070905:
  AFFECTS: testers of net/openldap24-server
  AUTHOR: delphij@FreeBSD.org

  openldap24-server was updated to 2.4.5-beta.  This is the first beta
  release of the OpenLDAP 2.4.x series, and contains significant changes
  compared to its previous release.

  Berkeley DB 4.2 support was dropped and Berkeley DB 4.6 is now default.
  As this is still a beta release, it should be treated accordingly and
  should not be used in critical (e.g. production) environments.

20070904:
  AFFECTS: users of mail/qmail-scanner
  AUTHOR: lippe@freebsdbrasil.com.br

  qmail-scanner was updated to 2.x, and 1.x version was repocopied to
  mail/qmail-scanner1.  There are some differences between these two
  versions:

  quarantine-attachments.txt has been renamed to quarantine-events.txt, it
  is used to quarantine more than just attachments, and the format of that
  file has been changed.

  Quarantine directory is now separated into THREE subdirectories: "spam",
  "viruses", and "policy".  This is done so sites can arrange different
  auto-delete jobs to control the size of these areas if they wish so.

  Some features that were hard-wired into the main body of Q-S have been
  moved into quarantine-events.txt, where they should have been all along.
  This makes it possible to change settings without reconfiguring the main
  body of qmail-scanner-queue.pl.  You will need to rewrite any rules you
  had in place within the old quarantine-attachments.txt into the new
  format quarantine-events.txt.

  Binary security permissions were changed to 6755 -- i.e. it is now both
  setuid and setgid.  Forcing all files to be group qscand will allow those
  who wish to do so to keep their AV daemons running as other accounts.
  They just need to ensure those daemons are members of the qscand group --
  and as such should be able to read the necessary files.  E.g. clamd could
  run as "clamav", but as long as account "clamav" is a member of group
  "qscand", clamd is able to read the mail enough to scan it.

20070903:
  AFFECTS: users of net/whois, net/gwhois
  AUTHOR: nivo+kw+ports.bfa274@is-root.com

  To avoid a conflicting binary name issue, net/whois has renamed its
  files to mwhois.  Please use mwhois if you want to use Marco d'Itri's
  whois client from now on.

20070828:
  AFFECTS: users of www/wordpress-mu
  AUTHOR: araujo@FreeBSD.org

  To follow the standards this port has received a small reworking.

  WORDPRESSMU (that defaulted to PREFIX/www/data/wordpress-mu) is deprecated,
  use WWWDIR (defaults to PREFIX/www/wordpress-mu).

20070828:
  AFFECTS: users of databases/mysql51-client
  AUTHOR: ale@FreeBSD.org

  Since libmysqlclient version number is increased, all ports depending
  on it must be recompiled. Run something like:

    # portmaster -r mysql-client

20070821:
  AFFECTS: users of net-im/pidgin
  AUTHOR: marcus@FreeBSD.org

  Because sound support was added to finch 2.1.1, the sound files used by
  pidgin have been moved from the pidgin port to the libpurple port.  This
  makes updating a bit tricky.  To properly update to pidgin 2.1.1 and retain
  sounds, you must first upgrade libpurple and pidgin as you normally would,
  then force a rebuild of libpurple.  For example, using portupgrade:

    # portupgrade net-im/libpurple net-im/pidgin
    # portupgrade -f net-im/libpurple

20070804:
  AFFECTS: users of DESTDIR
  AUTHOR: gabor@FreeBSD.org

  DESTDIR is a feature, that allows installation of ports into separate
  environments, like jails.  The previous implementation, introduced in the
  August 2006, had some problems and was very expensive to maintain.  It was
  completely rolled back, and replaced with a brand new implementation
  utilizing chroot.

  When DESTDIR is set, the system will chroot into the specified directory,
  mount devfs, null mount the Ports Tree, then proceed with building and
  installing.  Your kernel must support nullfs (is available as loadable kernel
  module on default installation).  The target environment must be a full
  FreeBSD installation. For advanced use, read comments at the beginning of
  bsd.destdir.mk.

20070730:
  AFFECTS: users of lang/python24 and py-*
  AUTHOR: python@FreeBSD.org

  The default version of Python has been changed from 2.4.x to 2.5.x.
  If you have 2.4.x installed, perform an upgrade of lang/python24 to
  lang/python25 with a command like:

    # portupgrade -o lang/python25 lang/python24

  If you want to keep 2.4.x installed alongside 2.5.x, set the
  PYTHON_DEFAULT_VERSION variable to 'python2.5' without quotes in make.conf,
  then go to lang/python and execute

    # portupgrade -R python

  Once the installed Python has been updated to 2.5, by using one of the
  methods above, it is required to run the upgrade-site-packages target in
  lang/python to assure that site-packages are made available to the new Python
  version.

    # cd /usr/ports/lang/python && make upgrade-site-packages

  This Makefile target requires ports-mgmt/portupgrade to be installed.

20070727:
  AFFECTS: autotools
  AUTHOR: ade@FreeBSD.org

  Extensive reworking of the autotools ports has occurred, putting them in
  the canonical locations, along with a suitable wrapper port to make
  developing autotools-using code (as opposed to just building ports)
  considerably easier.

  Upgrade path is as follows for portupgrade:

    1. portupgrade -f 'autoconf*' 'automake*'
    2. cd /usr/ports/devel/autotools; make install
    3. portupgrade -a

  For portmaster:

    1. portmaster autoconf automake
    2. portmaster devel/autotools
    3. portmaster -a

  The second step is optional, but is recommended to bring in all versions
  of autoconf and automake.

20070723:
  AFFECTS: users of x11/nvidia-driver and slave ports
  AUTHOR: danfe@FreeBSD.org

  NVVERSION is no longer user settable variable, it is derived from
  DISTVERSION from now on.  If you used nvidia-driver port with custom
  NVVERSION, it is time to switch to corresponding legacy driver version
  port.  They were renamed in order to stop hardcoding explicit version
  numbers in their [directory] names.

20070718:
  AFFECTS: users of devel/llvm
  AUTHOR: brooks@FreeBSD.org

  The llvm bytecode and .ll formats have changed as have numerous
  internal APIs.  Existing users should consult the release notes:

    http://llvm.org/releases/2.0/docs/ReleaseNotes.html

20070716:
  AFFECTS: users of editors/emacs
  AUTHOR: nobutaka@FreeBSD.org

  editors/emacs port is upgraded to 22.1.
  Since this is a major upgrade, all installed elisp ports should be
  reinstalled.

  Please add EMACS_PORT_NAME=emacs22 to /etc/make.conf and upgrade Emacs
  and related ports with:

    # portupgrade -fr emacs

  If you want to keep using Emacs 21.3, please add EMACS_PORT_NAME=emacs21
  to /etc/make.conf and reinstall Emacs from editors/emacs21 port:

    # portupgrade -f -o editors/emacs21 emacs

20070713:
  AFFECTS: users of audio/pulseaudio
  AUTHOR: gnome@FreeBSD.org

  The realtime group (default GID of 557) has been renamed pulse-rt to keep
  in sync with the pulseaudio distribution.  If you are upgrading from a
  previous version of pulseaudio, you will need to modify /etc/group and
  change the name of the group with ID 557 to ``pulse-rt''.

20070706:
  AFFECTS: users of www/gallery
  AUTHOR: freebsd-ports@varju.ca

  The default install location has changed from
  ${PREFIX}/www/data/gallery to ${PREFIX}/www/gallery.

20070704:
  AFFECTS: users of x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  The media kioslave now mounts all filesystems that support charset conversion
  with charset conversion turned on, set to the locale from the user's
  environment (LANG). If you are using a customized kernel configuration, make
  sure all *_iconv kernel modules are available. At the time of writing, these
  are cd9660_iconv, udf_iconv, msdosfs_iconv and ntfs_iconv.

20070614:
  AFFECTS: users of www/oscommerce
  AUTHOR: vlad@vlad.uz.ua

  osCommerce now installs into /usr/local/www/oscommerce instead of
  /usr/local/www/data/oscommerce.

20070614:
  AFFECTS: users of www/mediawiki
  AUTHOR: miwi@FreeBSD.org

  www/mediawiki version is 1.10 now. 1.9 version was preserved as
  www/mediawiki19 port.

20070614:
  AFFECTS: users of www/xshttpd-devel and web apps porters
  AUTHOR: johans@FreeBSD.org

  www/xshttpd-devel now uses ${PREFIX}/www/xshttpd/ as a root
  directory for its data files. The xshttpd configuration files have
  been moved to ${PREFIX}/www/xshttpd/conf/. Move the appropriate
  local files manually if you are upgrading from versions <= 3.5.b07

20070613:
  AFFECTS: users of net-mgmt/zabbix
  AUTHOR: infofarmer@FreeBSD.org

  The agent part has been moved out into net/zabbix-agent. If you need both
  the server and the agent, install both ports.

20070612:
  AFFECTS: users of security/sshguard
  AUTHOR: itetcu@FreeBSD.org

  The port has been split in 3, if you use it with ipfw please:
  # portupgrade -o security/sshguard-ipfw sshguard\*
  or if you use it with pf:
  # portupgrade -o security/sshguard-pf sshguard\*

20070526:
  AFFECTS: users of devel/perforce
  AUTHOR: lth@FreeBSD.org

  Perforce has been updated to version 2006.2. Even though upgrading
  should be fairly straightforward, it is still highly recommended
  to follow the upgrading instructions in the release notes:

    http://www.perforce.com/perforce/doc.062/user/relnotes.txt

20070525:
  AFFECTS: users of textproc/senna and textproc/p5-Senna
  AUTHOR: kuriyama@FreeBSD.org

  Index format (binary) and some of APIs are changed.  At least you
  need to rebuild all indexes, and maybe need to change your code (if
  you use senna API) to follow up to new API.

20070514:
  AFFECTS: users of net/samba3, japanese/samba3
  AUTHOR: timur@gnu.org

  ATTENTION! Besides security fixes this version of Samba3
  significantly changes a lot of options and behavior of Samba.
  Please, read WHATSNEW.txt and other port documentation before
  upgrading production systems.

  Off-line Logons and AD Site Support
  ===================================

  Winbind's capability to support offline logons has been greatly
  improved with the 3.0.25 release including support for locating
  domain controllers asynchronously using Active Directory Site
  information.


  New IdMap Interface for Winbindd
  ================================

  The 3.0.25 release of Samba includes a rewritten IdMap interface
  for winbindd which replaces the "idmap backend" parameter.  Please
  refer to the "idmap domains" description in the smb.conf(5) man
  page for more details.

  Dynamic DNS Updates
  ===================

  The "net ads join" command is now able to register the host's DNS
  A records with Windows 2000 SP4 and 2003 DNS servers.  This feature
  must be enabled at compile time using the --with-dnsupdate when
  running the ./configure script.  There is also a related "net ads
  dns" command for refreshing a host's records which could be launched
  from a dhcp client script when a new IP address is obtained.

  Support for Additional ACL Modules
  ==================================

  Samba's POSIX ACL support has been moved inside of the VFS layer
  which means it is now possible to support multiple ACL
  implementations on the same server including NFSv4 and GPFS ACLs.

  VFS ReadAhead Plugin
  ====================

  Windows Vista introduces pipe-lined read support for improved
  performance when transferring files.  The new vfs_readahead plugin
  allows Linux file servers to utilize additional Kernel buffers for
  caching files in order to avoid Disk I/O wait time when serving
  Vista clients.  If you experience poor read performance between
  Linux servers and Vista clients, please test the vfs_readahead
  module by adding the following lines to the share definition in
  smb.conf:

  [file_share]
    vfs objects = readahead

  Note that this plugin will result in additional RAM requirements
  due to the increased amount of kernel buffer caches used by smbd.
  Please refer to vfs_readahead(8) for more information.

  Windows Vista, Office 2007, and Offline Files
  =============================================

  Research surrounding offline files, Windows Vista, and Microsoft
  Office 2007 has revealed a incompatibility between these
  applications and the "map acl inherit = no" setting in smb.conf.
  Users requiring support client side caching (csc) and offline
  files are encouraged to enable the "map acl inherit" for any
  affected share definitions in the server's configuration.
  Future versions of Samba will enable this setting by default.

  Please refer to the smb.conf(5) man page for more details on
  "map acl inherit".

20070519:
  AFFECTS: users of X.Org
  AUTHOR: kris@FreeBSD.org

  Welcome, fearless user!  You are about to embark upon a mystical
  journey to the world of X.Org 7.2.

  This upgrade procedure is for users of portupgrade.  Users of other
  upgrade tools should contact the author for the corresponding upgrade
  method for that tool.

  It is recommended that you run the X.Org 7.2 upgrade inside a script(1)
  session.  This way, if something goes wrong, you will have hopefully
  saved enough information for the developers to debug the problem.
  Make sure you choose a filesystem with lots of space for the script
  output.

    # script xorg-upgrade

  You may wish to set BATCH=yes in the environment to avoid interactive
  dialogue boxes.

  You may want to consider using portupgrade-devel, which fixes some
  annoying bugs that cause upgrades to incorrectly be marked as failed
  when they actually completed successfully.  To switch to
  portupgrade-devel:

    # portupgrade -f -o ports-mgmt/portupgrade-devel portupgrade
    # rm -f /usr/ports/INDEX*.db /var/db/pkg/pkgdb.db
    # pkgdb -fu

  If you have changed your ports environment in /etc/make.conf,
  /usr/local/etc/pkgtools.conf or similar you need to rebuild INDEX:

    # cd /usr/ports && make index

  If you have not changed your ports environment you can save some
  time and just fetch the latest INDEX:

    # cd /usr/ports && make fetchindex

  It is necessary to set the XORG_UPGRADE environment variable while
  updating from X.Org 6.9 to 7.2.  Once the upgrade is complete this
  is no longer be required.

  For users of csh-like shells:
  # setenv XORG_UPGRADE yes

  For users of sh-like shells:
  # export XORG_UPGRADE=yes

  Unfortunately portupgrade (nor portupgrade-devel) cannot yet handle
  the rigors of the X.Org upgrade without a small bit of help:

    # portupgrade -Rf libXft

  If your machine does NOT have any gstreamer ports installed, you can then
  run:

    # portupgrade -a

  However, if you DO have gstreamer ports installed, you must run:

    # portupgrade -a -x 'gstreamer*'

  Followed by:

    # portupgrade -Rr 'gstreamer*'

  When packages are available (wait for the announcement on ports@), you
  may prefer to use precompiled packages to speed up the process:

    # portupgrade -aP

  Once the upgrade completes successfully, you can delete the
  xorg-manpages package, which is now orphaned.

    # pkg_delete xorg-manpages\*

  The final step is to merge remaining files from /usr/X11R6 into
  /usr/local (/usr/X11R6 is no longer used with X.Org 7.2) and replace
  /usr/X11R6 with a symlink.

  A script is provided for your convenience (or you may choose to do
  this by hand): it will first attempt to back up your /usr/X11R6 into
  /usr/tmp/mergebase in case something goes wrong, then look for
  conflicts (files in /usr/X11R6 that would overwrite files in
  /usr/local).  Depending on your system configuration you may have to
  resolve some of these conflicts by hand first (if in doubt, ask for
  help on freebsd-x11@FreeBSD.org).  You may also need to edit the
  script if the default locations are not correct on your system.

  If your /usr/X11R6 is a file system, you will also need to modify the
  script to pause after /usr/X11R6 is backed up, but before the symlink is
  created.

  # sh /usr/ports/Tools/scripts/mergebase.sh

  When the merge operation completes successfully, the /usr/X11R6
  directory hierarchy will be removed and replaced by a symlink to
  /usr/local.  This symlink is necessary because some binary ports (and
  some remaining source ports) have hard-coded references to /usr/X11R6.

  Congratulations, you are done!

  # exit

  CAVEATS

  Make sure you have the x11/xorg meta-port installed.  If you do not have
  this meta-port installed with X.Org 6.9, you will miss out on a lot of
  the new X.Org 7.2 sub-ports.

  If you plan on keeping your current /etc/X11/xorg.conf, make sure you
  change ModulePath to /usr/local/lib/xorg/modules prior to running X.

  If you run into problems running the new X server, try moving aside
  your /etc/X11/xorg.conf and allow X to run with default values. After
  that you can see the default values in a log file (e.g. /var/log/Xorg.0.log)
  and fix your xorg.conf according to the defaults.

  IF YOU RUN INTO PROBLEMS:

  # uname -a
  # ls -l /var/db/pkg
  # exit

  and send an email to freebsd-x11@FreeBSD.org with a full description
  of the problem.  Do not include the above typescript in your email,
  but bzip2 it and make it available to the developers (e.g. put it
  online or send it by private email upon request).

20070428:
  AFFECTS: users of print/ghostscript-gnu-{commfont,jpnfont,korfont}
  AUTHOR: hrs@FreeBSD.org

  These ports now use PostScript virtual fonts to handle CJK CID/TT-CID
  emulated fonts.  CIDFnmap still works but note that if a font is both
  in Resource/Font or Resource/CIDFont and in CIDFnmap, the entry in
  Resource/* will be used.  For the actual font mapping, see files in
  Resource/CIDFont/*.  This is just an internal structural change;
  default font mapping has not been changed.

  If you use CIDFnmap to change a font mapping already defined by
  Resource/CIDFont/foo, you have to remove (or rename) the
  Resource/CIDFont/foo file first.

20070423:
  AFFECTS: users of www/p5-Kwiki
  AUTHOR: clsung@FreeBSD.org

  The current version of Kwiki contains all plugins.
  To upgrade from old version (prior to 0.39), please do:

    # cd <into your Kwiki site directory>
    # rm index.cgi
    # rm -rf ./lib      # Remove ./lib, if you have one
    # kwiki -update

  And you are safe to uninstall www/p5-Kwiki-*, which also means
  you do not have to install www/p5-Kwiki-*.

20070408:
  AFFECTS: users of japanese/ptex{,-base,-tetex}
  AUTHOR: hrs@FreeBSD.org

  The japanese/ptex has been removed and japanese/ptex-tetex has been
  renamed with japanese/ptex.  A pair of ptex and ptex-base and
  ptex-tetex are basically the same with each other, so there should
  be no functionality regression.

20070407:
  AFFECTS: users of net-mgmt/nagios
  AUTHOR: jarrod@netleader.com.au

  nagios now uses the registered uid/gid 181 for a fresh installation.
  To switch to the new scheme, the following may help:

    # /usr/local/etc/rc.d/nagios stop
    Stopping nagios.
    # find / -user nagios -exec chown 181 {} \;
    # find / -group nagios -exec chgrp 181 {} \;
    # pw groupmod nagios -g 181
    # pw usermod nagios -u 181 -g 181
    # /usr/local/etc/rc.d/nagios start
    Performing sanity check of nagios configuration: OK
    Starting nagios.

20070405:
  AFFECTS: users of print/ghostscript-*
  AUTHOR: rafan@FreeBSD.org

  The default ghostscript port is changed from ghostscript-gnu to
  ghostscript-gpl. To upgrade

    portupgrade -o print/ghostscript-gpl ghostscript-gnu
    portmaster -o print/ghostscript-gpl ghostscript-gnu

  If you want to use the ghostscript-gnu as default, put
  WITH_GHOSTSCRIPT_GNU=yes in your make.conf.

20070404:
  AFFECTS: users of graphics/gimp and graphics/gimp-devel
  AUTHOR: ahze@FreeBSD.org

  The gimp[-devel] port is now a meta-port so users will need to upgrade via
  one of the following examples. Gimp now depends on gutenprint instead of
  gimp-print, if you have gimp-print installed you will need to
  pkg_delete gimp-print before you install or upgrade the gimp.

  Portmaster users:
    (gimp)
    portmaster -o graphics/gimp-app gimp
    portmaster graphics/gimp
    (gimp-devel)
    portmaster -o graphics/gimp-app-devel gimp-devel
    portmaster graphics/gimp-devel

  Portupgrade users:
    (gimp)
    portupgrade -o graphics/gimp-app gimp
    portupgrade -u graphics/gimp

20070404:
  AFFECTS: users of print/gutenprint
  AUTHOR: ahze@FreeBSD.org

  The gutenprint port is now a meta-port so users will need to upgrade via
  one of the following examples. If you have gimp-print installed you
  will need to pkg_delete gimp-print before installing gutenprint.

  Portmaster users:
    portmaster -o print/gutenprint-base gutenprint
    portmaster print/gutenprint

  Portupgrade users:
    portupgrade -o print/gutenprint-base gutenprint
    portupgrade -u print/gutenprint

20070402:
  AFFECTS: users of devel/cvstrac
  AUTHOR: nkoch@demig.de

  cvstrac is changed to use SQLite 3, users should backup their database
  then restore after upgrading. For example:

    mv cvstrac.db cvstrac_2.db
    sqlite cvstrac_2.db .dump | sqlite3 cvstrac.db

20070327:
  AFFECTS: users of emulators/linux_base-fc6
  AUTHOR: bsam@FreeBSD.org

  ATTENTION! The port is experimental for now. Use it at your own risk. This
  port may be used only with 7-CURRENT and compat.linux.osrelease=2.6.16.

  To use/test the port (along with FC4 Linux infrastructure ports) you
  should do:

  0. Backup all your vital information!
  1. Remove the current Linux base port.
  2. Add to your /etc/make.conf "OVERRIDE_LINUX_BASE_PORT=fc6".
  3. Make sure no Linux application is running.
  4. Set appropriate sysctl (compat.linux.osrelease=2.6.16).
  5. Install emulation/linux_base-fc6.
  5a. Those who use Linux ports with automatic plist building should
      apply the following patch:
      ftp://mail.ipt.ru/pub/FreeBSD/patches/bsd.linux-rpm.mk-autoplist.diff

  That should be enough at most circumstances. If you have difficulties,
  please be sure to expand item 1 to:

  1a. Remove all ports that depend on Linux base port.
  1b. Remove Linux base port.
  1c. Clean /compat/linux/ directory.

  In case you want to get rid of the port, deinstall it, then return
  back compat.linux.osrelease to 2.4.2 (as usual, make sure that no
  Linux application is running) and remove from /etc/make.conf the line
  containing the OVERRIDE_LINUX_BASE_PORT variable.

20070327:
  AFFECTS: users of lang/tcl-tk-wrapper, lang/tcl*, x11-toolkits/tk*
  AUTHOR: martin@matuska.org

  The lang/tcl-tk-wrapper port has been replaced by lang/tcl-wrapper and
  x11-toolkits/tk-wrapper ports. The Tcl and Tk ports no longer include an
  option to install the wrapper -- the wrapper ports require a Tcl/Tk
  instead.  The new configuration files in local etc directory are named:
  tclsh.conf, wish.conf.

20070327:
  AFFECTS: users of devel/py-sip and x11-toolkits/py-qt
  AUTHOR: miwi@FreeBSD.org

  py-sip and py-qt has been updated to the latest snapshot. Please update
  py-sip *before* updating py-qt and/or installing py-qt4-*. The full changelog
  can be found at http://people.freebsd.org/~miwi/py-qt4.txt

20070325:
  AFFECTS: users of www/drupal and drupal-*
  AUTHOR: rafan@FreeBSD.org

  All 4.x drupal ports are renamed to have a drupal4 prefix. As a result,
  default install location is changed from PREFIX/www/drupal to
  PREFIX/www/drupal4. Take some precautions when upgrading.

20070319:
  AFFECTS: users of x11-wm/fluxbox and x11-wm/fluxbox-devel
  AUTHOR: mezz@FreeBSD.org

  The x11-wm/fluxbox-devel has been merged into x11-wm/fluxbox. You should
  back up your ~/.fluxbox and remove it. If you still want to keep using
  your good old ~/.fluxbox, you will have to do the following:

    - Since prefix has been changed from X11BASE (/usr/X11R6) to
      LOCALBASE (/usr/local), you might have to edit a few paths in
      the ~/.fluxbox/* if there are any.
    - The bsetroot has been renamed to fbsetroot. You might have to
      tweak a few themes for bsetroot -> fbsetroot. Other way it can be
      is to install the x11-wm/boxtools that has bsetroot if you do not
      want to edit any themes.

  While I am here, don't forget to use 'pkgdb -Ff'. As for the portmaster
  users, I don't think you will need to do anything since portmaster will
  take care of it by default.

20070318:
  AFFECTS: users of devel/gettext (i.e.: YOU)
  AUTHOR: ade@FreeBSD.org

  As a result of the upgrade to gettext-0.16.1, the shared library version
  of libintl has changed, so you will need to rebuild all ports that
  depend on gettext (read: most of them, sorry):

    portupgrade -rf gettext
  or:
    portmaster -r gettext

  In addition, if you have multimedia/vlc installed, you should deinstall
  it *before* either of the above commands, and reinstall it manually
  afterwards: vlc erroneously installs its own version of lib/charset.alias
  which will overwrite the one supplied by devel/gettext otherwise.

20070313:
  AFFECTS: users of x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  The HAL option has been turned on by default and the fstabbackend
  patches which have kept the fstab backend for the media kioslave
  at the status quo of KDE 3.5.3 have been removed. This means that

     MOUNTING DEVICES THROUGH KDE WILL NO LONGER WORK WITHOUT HAL.

  Thus if you wish to use device icons or the media:/ view in konqueror,
  make sure to turn on the HAL option in the x11/kdebase3 port and also
  read /usr/ports/UPDATING entry 20061219 and
  http://www.freebsd.org/gnome/docs/faq2.html#q19 for more information on
  using HAL.

20070312:
  AFFECTS: all users of net/py-libdnet
  AUTHOR: tmclaugh@FreeBSD.org

  The py-libdnet port has been separated out as a slave port to libdnet and
  is now dependent on libdnet.  py-libdnet now only installs the libdnet
  python modules.  Since files previously owned by py-libdnet are now owned
  by its dependency, in order to upgrade correctly, py-libdnet must be
  deinstalled and then reinstalled manually.

20070205:
  AFFECTS: all users of FreeBSD 4.X
  AUTHOR: portmgr@FreeBSD.org

  The remnants of FreeBSD 4.X support have been removed from bsd.port.mk.
  Any remaining users should _not_ get this or any subsequent updates.

20070311:
  AFFECTS: users of x11-wm/enlightenment-devel
  AUTHOR: stas@FreeBSD.org

  The binary used to start an enlightenment session was renamed from
  enlightenment to enlightenment_start. All users should update their
  xinitrc's or other startup files to reflect this change.

20070301:
  AFFECTS: users of ports-mgmt/portupgrade*
  AUTHOR: sem@FreeBSD.org

  Because of a bug in previous version, it is recommended you fill ALT_PKGDEP
  section in pkgtools.conf file for portupgrade be aware of alternative
  dependencies you use, and run pkgdb -L to restore dependencies that was
  lost.

  Example of ALT_PKGDEP section:
  ALT_PKGDEP = {
    'www/apache13' => 'www/apache13-modssl',
    'print/ghostscript-afpl' => 'print/ghostscript-gnu',
  }

  Note also, portupgrade knows nothing how to handle ports with different
  suffixes (E.g. -nox11). So you should define explicitly variables
  (E.g. WITHOUT_X11=yes) for the ports in /etc/make.conf or pkgtools.conf
  (MAKE_ARGS section) files.

20070227:
  AFFECTS: users of net-im/jabber*
  AUTHOR: martin@matuska.org

  With update to version 1.6.0 the name of the jabber daemon has been
  changed to bin/jabberd14 to avoid conflicts with other jabber daemons.
  The port now supports WITH_MYSQL and WITH_POSTGRESQL knobs.

  If you are using one of the following ports please recompile it due
  to changes in the library.

  net-im/jabber-conference
  net-im/jabber-jud
  net-im/jabber-yahoo

  Some configuration directives have changed, too. Please see example
  configuration files and README.jabberd14 files in the ports above.

20070223:
  AFFECTS: users of audio/speex and any port that depends on it
  AUTHOR: mezz@FreeBSD.org

  The shared library version has been changed in audio/speex, so you will
  have to rebuild all ports that depend on speex. You need to do following:

  Portupgrade users:

    pkgdb -Ff
    portupgrade -rf speex\*

  Portmaster users, skip a first step if you don't have audio/speex-devel
  installed:

    portmaster -o audio/speex speex-devel
    portmaster -r speex

20070218:
  AFFECTS: users of sysutils/symon
  AUTHOR: uspoerlein@gmail.com

  The symon port has been updated from 2.72 to 2.75.  It changes the wire
  protocol, therefore, you should update your symux(8) installation first,
  before updating your symon(8) clients.  symux(8) is backwards compatible
  and understands both protocol versions.

20070215:
  AFFECTS: users of security/clamav
  AUTHOR: garga@FreeBSD.org

  Since version 0.90, clamd.conf and clamav.conf have changed their syntax.
  All parameters can now be turned on/off using a boolean value (0,1) or
  (on,off) or (true,false), the old crude hack of "DisableDefaultScanOptions"
  is no longer required.

  Please, check ${PREFIX}/etc/(clamd|freshclam).conf.default and make needed
  changes on your conf files.

20070215:
  AFFECTS: users of www/py-turbogears
  AUTHOR: nivit@FreeBSD.org

  TurboGears has been updated from version 0.8.9 to 1.0.1,
  so there are significant changes. After upgrading the port,
  with the usual portupgrade/portmanager command, it is highly
  recommended to follow the instructions at this URL:

    http://www.turbogears.com/download/upgrade.html

  starting from section "Updating from 0.8 to 0.9" on, to make
  your projects/code consistent with the new version.

20070210:
  AFFECTS: users of x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  The media kioslave now mounts cdrom/dvd volumes with local charset
  conversion (mount_cd9660 -C <charset>), which requires the cd9660_iconv
  kernel module to be available for volumes with ISO 9660 filesystems and
  the udf and udf_iconv kernel modules for UDF filesystems.

20070209:
  AFFECTS: users of x11/nvidia-driver
  AUTHOR: danfe@FreeBSD.org

  nVidia continues to drop support for old ("legacy") GPUs.  To deal with
  this fact, the port now allows to specify correct NVVERSION in order to
  build driver that supports your graphics card.  Currently, supported
  "legacy" values are 7184 and 9631.  Consult nVidia's README (Appendix A)
  to find out whether you need to use legacy driver version, and exactly
  which one.  Alternatively, you can install one of the corresponding
  `x11/nvidia-driver-XXXX' slave ports, where XXXX == needed NVVERSION.

20070208:
  AFFECTS: users of databases/pear-MDB2
  AUTHOR: rafan@FreeBSD.org

  All databases dependent bits are moved into other PEAR modules. You need
  to install appropriate databases/pear-MDB2_Driver_* port.

20070207:
  AFFECTS: users of www/squid*
  AUTHOR: tmseck@netcologne.de

  The www/squid port has been updated to 2.6.  If you are updating from Squid
  2.5, please read the Squid release notes at
  http://www.squid-cache.org/Versions/v2/2.6/squid-2.6.STABLE9-RELEASENOTES.html
  and see whether you need to adapt your squid.conf to the changes described
  there.

  Squid 2.5 will be available as www/squid25 for next few months.  But note
  it is no longer being maintained by the Squid developers.

20070206:
  AFFECTS: users of emulators/qemu
  AUTHOR: nox@FreeBSD.org

  qemu now uses aio at least for ide dma, so if you get
  "Invalid system call" crashes that is because aio is not (kld)loaded.

20070206:
  AFFECTS: users of graphics/djvulibre
  AUTHOR: stas@FreeBSD.org

  djview was renamed to djview3. For now, the symlink djview->djview3
  installed for compatibility. However, users should refer to djview3(1)
  instead of djview(1).

20070205:
  AFFECTS: prospective users of devel/qt4
  AUTHOR: kde@FreeBSD.org

  The qt4 ports and associated infrastructure introduce a few new
  Makefile variables and porting concepts (compared to qt33).

  For details and examples, see
  http://mail.kde.org/pipermail/kde-freebsd/2007-February/000239.html

20070205:
  AFFECTS: everybody
  AUTHOR: pav@FreeBSD.org

  New ports category was created: ports-mgmt.

  Most significant port moved to this new category is portupgrade.
  So don't be alarmed, it was not deleted. You can find it now in
  /usr/ports/ports-mgmt/portupgrade.

20070205:
  AFFECTS: users of devel/portmk
  AUTHOR: linimon@FreeBSD.org

  With the repocopy of portmk to ports-mgmt, you need to update your
  make.conf.  Change the two Makevars BSDPORTMK and BSDPORTSUBDIRMK
  to point to ports-mgmt/portmk.

20070202:
  AFFECTS: users of www/aolserver
  AUTHOR: martin@matuska.org

  With update to aolserver 4.5.0 modules have been moved to separate ports.

  The following modules are available initially:

    archivers/aolserver-nszlib
    databases/aolserver-nsmysql
    databases/aolserver-nspostgres
    graphics/aolserver-nsgd
    security/aolserver-nsencrypt
    security/aolserver-nsmcrypt
    security/aolserver-nsmhash
    security/aolserver-nsopenssl
    security/aolserver-nssha1
    www/aolserver-nscache

  A different aolserver install directory for aolserver and modules
  can be specified by defining AOLSERVERBASE in make.conf

  The rc.d script has been renamed from aolserver.sh to aolserver.

20070102:
  AFFECTS: users of sysutils/portupgrade
  AUTHOR: sem@FreeBSD.org

  If you have a problem with upgrading the tools from version 2.2.1 and less,
  remove the package with pkg_delete portupgrade\* command and reinstall it
  from scratch. Remove /usr/ports/INDEX*.db and run portsdb -u.

20070130:
  AFFECTS: users of dns/powerdns
  AUTHOR: tremere@cainites.net

  The configuration file was moved from /usr/local/etc to /usr/local/etc/pdns.

20070127:
  AFFECTS: users of mail/dovecot
  AUTHOR: robin@isometry.net

  Since dovecot-1.0.r15, the port has reserved UID/GID 143.
  If you are upgrading from an earlier version, please allow the uninstall
  script to remove the dovecot user and group or remove them manually prior
  to reinstalling the new version.
  If your prefer to maintain your existing user/group, you may override this
  change with the DOVECOT_UID/DOVECOT_GID environment variables at
  installation time.

20070115:
  AFFECTS: users of www/lightsquid
  AUTHOR: clsung@FreeBSD.org

  The default configuration files have changed to
  ${PREFIX}/etc/lightsquid.

20070111:
  AFFECTS: users of irc/weechat
  AUTHOR: az@FreeBSD.org

  For users of any previous version, all your charset settings
  in weechat.rc will be LOST! You should save your weechat.rc
  to keep your values and set them again with new "charset" plugin.
  For ISO users: history of channels may be without accents
  (after /upgrade), this is not recoverable, but this is not a bug.
  All new messages should be ok.
  Be careful, now default encode is UTF-8 for all channels (before
  it was terminal charset). If you still want to send messages as
  ISO-8859-1, you should send either global encode or server specific
  encode to ISO-8859-1.
  For global encode: /setp charset.global.encode = "ISO-8859-1"
  For server encode: (on server buffer)  /charset encode ISO-8859-1

20070109:
  AFFECTS: users of databases/postgresql*
  AUTHOR: girgen@FreeBSD.org

  The server-side utilities of PostgreSQL (initdb, initlocation, ipcclean,
  pg_controldata, pg_ctl, pg_id and pg_resetxlog) are now installed by the
  respective postgresql*-server port (previously they where installed with
  the client).  If you update the client, you should also update the server
  port to make sure you would not be left without the server-side tools.
  Do something like this:

    portupgrade postgresql-client postgresql-server

20070105:
  AFFECTS: users of mail/spamprobe
  AUTHOR: stefan@FreeBSD.org

  With the update to version 1.4d, the SpamProbe port doesn't use the OPTIONS
  framework any more to allow part of the changes below. That means that options
  selected for this port won't be saved/used automatically any more and you have
  to set the appropriate variables in /etc/make.conf or on the command line to
  change the port's behaviour; the variables are documented at the top of the
  port's Makefile. Before updating, it might be a good idea to remove
  /var/db/ports/spamprobe.

  The port now has support for the PBL database backend; unless built with
  WITHOUT_PBL set, SpamProbe will use PBL as the default even if you have an
  existing BerkleyDB or hash database; in that case, use the parameter "-d" to
  specify the type of the existing database on the command line, e.g.:

    spamprobe -d bdb:$HOME/.spamprobe receive

  or:

    spamprobe -d hash:$HOME/.spamprobe receive

  Using PBL instead of BerkleyDB might be a good idea, though, as the former
  seems to perform better. You can convert your existing database to PBL using
  the following commands (assuming you didn't disable PBL support):

    cd
    mkdir spamprobe.new
    spamprobe -d bdb:.spamprobe export | spamprobe -d spamprobe.new import
    mv .spamprobe spamprobe.old
    mv spamprobe.new .spamprobe

20070106:
  AFFECTS: users of security/libwhisker
  AUTHOR: araujo@bsdmail.org

  Libwhisker 2.0 is *not* backwards compatible with Libwhisker 1.x.
  Changing 'use LW' to 'use LW2' in your programs is not enough -- you may
  need to make code changes to your programs.

  However, there is a 'bridge' LW.pm module in which will use LW2
  (libwhisker 2.x) functions to emulate the LW (libwhisker 1.x)
  functionality.

  See http://www.wiretrip.net/rfp/libwhisker/README2 for more details.

20070104:
  AFFECTS: users of www/phpsurveyor
  AUTHOR: miwi@FreeBSD.org

  The default install location has changed from
  ${PREFIX}/www/data/phpsurveyor to ${PREFIX}/www/phpsurveyor.

20070104:
  AFFECTS: users of sysutils/hal
  AUTHOR: gnome@FreeBSD.org

  If atapicam is enabled in the kernel, hald will use the CAM device nodes
  instead of ATAPI device nodes to access disc devices (e.g. CD-ROMS,
  DVD drives, etc.).  Previously, hald would use ATAPI device nodes even
  if atapicam was enabled.  The previous behavior can be restored by
  following the instructions in /usr/local/share/doc/hal-0.5.8/README.freebsd.

20070102:
  AFFECTS: users of security/gnutls and any port that depends on it
  AUTHOR: novel@FreeBSD.org

  gnutls has been updated to 1.6.1 and all shared libraries' versions
  have been bumped. So you need to rebuild all applications that
  depend on gnutls. Do something like:

    portupgrade -rf gnutls

20061231:
  AFFECTS: users of mail/sylpheed-claws*
  AUTHOR: itetcu@FreeBSD.org

  Sylpheed-Claws has been renamed to Claws-Mail upstream. The port and the ports
  for the plug-ins have been renamed. If you didn't install claws-mail
  already you need to:
    portupgrade -o mail/claws-mail sylpheed-claws-2.6\*

20061221:
  AFFECTS: users of security/gnupg
  AUTHOR: kuriyama@FreeBSD.org

  The security/gnupg port was upgraded to 2.0.1 (with security fix)
  and good-old gnupg-1.4.6 was repocopied to security/gnupg1.

  Both of security/gnupg (2.x) and security/gnupg1 (1.4.x) are
  designed not to conflict with each other.  So you can use
  security/gnupg1 for gpg(1), and use security/gnupg for gpg2(1)
  commands.

  All directly dependents are $PORTREVISION bumped, so portupgrade -R
  gnupg will works fine.  After portupgrade, you will have both of
  gnupg-2.0.1 and gnupg-1.4.6.

20061219:
  AFFECTS: users of x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  If you choose to enable the HAL backend for the media kioslave,
  you should enable dbus, hal and policy kit during system startup.
  To do this, add the following lines to /etc/rc.conf:

    dbus_enable="YES"
    polkitd_enable="YES"
    hald_enable="YES"

  Notes and known problems about mounting devices in media:/ with HAL enabled:

  - Your user must be in group operator in order to be able to mount removable
    media.

  - Removable media drives (such as CD-ROM drives) *MUST NOT* be listed in
    /etc/fstab in order to be mountable.

  - If you mount a volume by double-clicking it, it may appear empty. Refresh
    the fileview in konqueror to see the files.

  - Mounting floppies is currently not supported.

    You can still mount them in KDE if ...

    - You have an fstab entry for your floppy pointing to a mountpoint
      owned by your user (e.g. somewhere in your homedir)
    - The vfs.usermount sysctl is set to 1

     ... by creating a floppy device icon on your KDE desktop and selecting
     the above-mentioned fstab entry in the device dropdown list on the
     device tab.

  - Mounting volumes from fixed drives is prohibited for non-superusers
    by default.

20061212:
  AFFECTS: users of net/smokeping
  AUTHOR: lth@FreeBSD.org

  Smokeping now uses rc.d script to startup. Please remember to add
  'smokeping_enable="YES"' to your rc.conf.

20061207:
  AFFECTS: users of devel/p5-PAR
  AUTHOR: rafan@FreeBSD.org

  As of version 0.97.0, all PAR::Packer logic, i.e. pp, parl and all
  packaging tools are moved to another distribution. You can install
  devel/p5-PAR-Packer to get them.

20061207:
  AFFECTS: users of net/samba3
  AUTHOR: timur@gnu.org

  Version 3.0.23d of net/samba3 finally got ability to conditionally link
  smbd daemon against FAM libraries.  If you do not need this support make
  sure that it is not selected in the options menu -- run `make config' to
  verify this.  You can remove FAM package if it was installed before as
  part of Samba dependencies.

20061201:
  AFFECTS: users of mail/assp
  AUTHOR: fbsd@opal.com

  This version of ASSP switches virus detection support from
  Mail::ClamAV to File::Scan::ClamAV which uses the external clamd
  daemon from the security/clamav port. You will need to ensure
  clamd is configured and running if you wish to use ASSP's CLAMAV
  option. The default means for ASSP to communicate with clamd
  has been set to match clamd's UNIX socket: /var/run/clamav/clamd.
  If you use clamd with a TCP socket, you should configure ASSP's
  AvClamdPort option to 3310 or whatever socket you use.

20061130:
  AFFECTS: users of net/openldap2[34]-server
  AUTHOR: delphij@FreeBSD.org

  The default Berkeley DB version has been changed from
  4.3 to 4.4, as suggested by OpenLDAP developers.

  Suggested upgrade steps:

    - Stop OpenLDAP server (i.e. ${PREFIX}/etc/rc.d/slapd stop)
    - Backup the OpenLDAP database (typically, /var/db/openldap-data)
      with your favorite tool
    - Do a "slapcat > backup.ldif" to dump all data
    - portupgrade net/openldap23-server
    - Remove BDB files from your /var/db/openldap-data;  you will want
      to keep DB_CONFIG as-is.
    - Do a "slapadd < backup.ldif" to restore the data

  Alternatively, if you want to keep the current BDB version (4.3),
  please define WITH_BDB_VER=43 when building the server.

20061121:
  AFFECTS: users of www/hastymail
  AUTHOR: miwi@FreeBSD.org

  The default install location has changed from
  ${PREFIX}/www/data/hastymail to ${PREFIX}/www/hastymail.

20061109:
  AFFECTS: users of milter-bogom, dk-milter, dkim-milter
  AUTHOR: ache@FreeBSD.org

  All 3 milters change their default user to "mailnull".

20061108:
  AFFECTS: users of databases/postgresql*-server
  AUTHOR: Palle Girgensohn <girgen@FreeBSD.org>

  With the latest patch release of the PostgreSQL ports, the rc script
  is renamed `postgresql'.

20061106:
  AFFECTS: users of net/freeradius
  AUTHOR: David Wood <david@wood2.org.uk>

  FreeBSD used to patch FreeRADIUS's rlm_mschap.c to strip all domain names
  when calculating the hash of an MS-CHAP challenge (a requirement specified
  in RFC 2759 paragraph 4 and amplified in paragraph 8.2). FreeRADIUS now
  offers its own solution to discard a domain name before hashing in the
  MS-CHAP code, which can be enabled via a configuration option. As there is
  no longer any need for the FreeBSD patch, it has been removed, leaving the
  MS-CHAP code behaving as supplied by the FreeRADIUS team.

  If the previous behaviour of the MS-CHAP code is required, add:

  with_ntdomain_hack = yes

  to the mschap { } section of your FreeRADIUS configuration. There should be
  a commented out line that can be modified around line 696 of
  ${PREFIX}/etc/raddb/radiusd.conf if your configuration is based on the
  sample FreeRADIUS configuration.

  This option is not set by default in the sample FreeRADIUS configuration.
  Only those who have clients sending a domain name as part of the user name
  when using MS-CHAP will be affected by this change; they will need to set
  this option to allow FreeRADIUS to authenticate their clients successfully.
  This may only affect those with older Windows clients, but I cannot be sure.

  Some sources suggest setting this configuration option anyway to prevent
  FreeRADIUS from breaching RFC 2759 inadvertently, leading to authentication
  failure. It is left to the user whether to set this configuration option
  anyway, or only to set it in the event of authentication failures stemming
  from MS-CHAP.

  Debug output from radiusd that reads "rlm_mschap: NT Domain delimeter found,
  should we have enabled with_ntdomain_hack?" suggests that this configuration
  option should be enabled.

  New maintainer alerted to this issue by private mail from Thomas Vogt
  <thomas@bsdunix.ch>.

20061106:
  AFFECTS: users of syutils/munin-*
  AUTHOR: miwi@FreeBSD.org

  The default install location has changed from ${PREFIX}/www/data/munin
  to ${PREFIX}/www/munin.

20061106:
  AFFECTS: users of chinese/tatter-tools
  AUTHOR: chinsan.tw@gmail.com

  The default install location has changed from ${PREFIX}/www/data/tatter
  to ${PREFIX}/www/tatter.

20061102:
  AFFECTS: users of mail/fetchmail
  AUTHOR: barner@FreeBSD.org

  - Along with the update to fetchmail 6.3.5, support for the POP2
    protocol has been removed from the port's default configuration.
    If needed, POP2 can be enabled with the port's option interface.

  - New feature: GSSAPI support.

20061101:
  AFFECTS: users of mail/dovecot
  AUTHOR: shaun@FreeBSD.org

  Dovecot now requires the mail root to be set explicitly in the
  default_mail_env variable, where it could previously be omitted.
  Using the old-style syntax may result in dovecot being unable to find
  mailboxes. Installations using the example/default configuration
  settings should not be affected.

  This is noted in the release announcement:

  http://dovecot.org/list/dovecot-news/2006-October/000016.html

20061031:
  AFFECTS: users of math/rkward
  AUTHOR: thierry@FreeBSD.org

  The way some information such as descriptive labels is stored in the
  R workspace was changed in RKWard 0.4.0.
  While the data itself can still be loaded, labels will not be
  available from workspaces created with an earlier version of RKWard.
  To convert the old labels to the new format, run
  rk.convert.pre040 ()
  in the RKWard R console after loading the workspace in question.

20061031:
  AFFECTS: users of news/inn-current or news/inn-stable
  AUTHOR: shaun@FreeBSD.org

  The stable and current ports of inn have been updated. They suffered
  from the same problem previously documented and fixed in news/inn.
  When upgrading either of the two mentioned ports, users are advised
  to move inn's database directory (/usr/local/news/db) out of the way
  prior to _deinstallation_ in order to save its contents from being
  erased.

20061014:
  AFFECTS: all GTK+2 and GNOME users
  AUTHOR: gnome@FreeBSD.org

  GNOME has been updated to 2.16.  All GTK+2 and GNOME components have been
  moved from X11BASE (/usr/X11R6) to LOCALBASE (/usr/local).  To upgrade
  your GNOME desktop or/and other applications you will need to use either
  sysutils/portupgrade or sysutils/portmaster.  To use portmaster, make
  sure you have least 1.9 version to have the upgrade succeed.

  Portupgrade users:
    pkgdb -Ff
    portupgrade -rf pkg-config\*

  Portmaster users:
    portmaster -r pkg-config

20061010:
  AFFECTS: users of devel/avr-gcc*
  AUTHOR: joerg@FreeBSD.org

  The old avr-gcc port has been renamed into avr-gcc-3, and continues
  support for GCC 3.x (for a while).

  The former avr-gcc-devel port has been moved into avr-gcc, so GCC
  4.x is now the default.

  There is an entry in MOVED for the latter change but not for the
  former one, as the automated tools (e.g. portupgrade) got confused
  otherwise.

  If you've previously been using avr-gcc-devel, these tools should
  automatically take notice (based on the entry in MOVED), and change
  the installed package to avr-gcc.

  If you've previously been using avr-gcc, and want to move on to the
  new default GCC 4.x, this should be fully automatic, as the port
  name just stays, and the version increases.

  If you've previously been using avr-gcc, and want to stay at GCC 3.x
  for some reason, please manually perform a portupgrade to the new
  name:

    portupgrade -o devel/avr-gcc-3 avr-gcc

20061010:
  AFFECTS: users of sysutils/flexbackup
  AUTHOR: Marcus von Appen <mva@sysfault.org>

  The port now respects PREFIX:

  Before:
    /etc/flexbackup.conf for PREFIX=whatever, WITH_PREFIX_CONF unset
  Now:
    PREFIX/etc/flexbackup.conf for PREFIX=whatever

20061010:
  AFFECTS: users of audio/gtkpod
  AUTHOR: danfe@FreeBSD.org

  WITH_AAC knob has been renamed to WITH_MPEG4IP since it now covers
  not only AAC, but H.264 support as well.

20061009:
  AFFECTS: users of ports using ODBC (databases/libiodbc or databases/unixODBC)
  AUTHOR: ganael.laplanche@martymac.com

  All the ports have been modified to use the same way of choosing
  between ODBC flavors (IODBC and UNIXODBC).

  This way is defining either WITH_IODBC or WITH_UNIXODBC.

20061009:
  AFFECTS: users of any ports using Python
  AUTHOR: perky@FreeBSD.org

  After upgrading of lang/python, you must rebuild all its consumer
  ports to make them get ready to Python 2.5.

  To do this, you will need to:
    pkgdb -uf && cd /usr/ports/lang/python && make upgrade-site-packages

20061007:
  AFFECTS: users of security/p5-openxpki
  AUTHOR: svysh@cryptocom.ru

  Old port security/p5-openxpki has been split into 8 new ports:
   p5-openxpki: core for server part
   p5-openxpki-client: base class for actual clients
   p5-openxpki-i18n: internationalization of the user interface
   p5-openxpki-client-cli: command line interface to local OpenXPKI daemon
   p5-openxpki-client-html-mason: web interface to local OpenXPKI daemon
   p5-openxpki-client-scep: set of SCEP tools
   p5-openxpki-client-soap-lite: set of SOAP-Lite tools
   p5-openxpki-deployment: set of deployment tools

  Please see security/p5-openxpki/pkg-descr for their interdependencies.

20060926:
  AFFECTS: users of security/libgpg-error and any port that depends on it
  AUTHOR: novel@FreeBSD.org

  libgpg-error was updated to 1.4 and shared library version has been
  bumped. So you need to rebuild all ports that depend on libgpg-error.
  Do something like:

    portupgrade -rf libgpg-error-\*

20060923:
  AFFECTS: users of net-mgmt/net-snmp
  AUTHOR: nork@FreeBSD.org

  rcNG script was updated to support snmpd_pidfile and snmpd_conffile.
  So, if you set snmpd_flags like "-c /usr/local/etc/snmpd.conf ...",
  please change your /etc/rc.conf like following setting:

  from (before update)
    snmpd_flags="-a -c /usr/local/etc/snmpd.conf -p /var/run/snmpd.pid"

  to (after update)
    snmpd_flags="-a"
    snmpd_pidfile="/var/run/snmpd.pid"
    snmpd_conffile="/usr/local/etc/snmpd.conf"

20060922:
  AFFECTS: users of mail/tmda
  AUTHOR: sergei@FreeBSD.org

  TMDA has been updated to version 1.1.5, which is the latest stable
  release.  1.1 is now the stable branch, 1.0 branch has been obsoleted.

  Changes include:
  - ~/.tmdarc configuration file has been obsoleted by ~/.tmda/ dir;
    see ${PREFIX}/share/examples/dot-tmda for sample configuration
  - only minimal set of HTML documentation is now installed;
    please see http://wiki.tmda.net/ for full documentation
  - templates has changed: single bounce.txt has been replaced
    with various bounce_*.txt templates; see ${PREFIX}/share/tmda

20060921:
  AFFECTS: users of mail/mailfront
  AUTHOR: sergei@FreeBSD.org

  Mailfront was rewritten in version 1.0 to be totally modular.
  Its functionality has been split into several modules that are now
  installed into ${PREFIX}/libexec/mailfront. Various *front-* commands
  are now merely shell script wrappers around the newly introduced
  mailfront command and its new modules.

  The smtpfront-reject command has been removed completely,
  being deprecated in favor of using a plugin.

  Please refer to http://untroubled.org/mailfront/NEWS for further details.

20060910:
  AFFECTS: users of net-mgmt/zabbix
  AUTHOR: sem@FreeBSD.org

  Users who start zabbix server should note that server name was changed
  from zabbix_suckerd to zabbix_server and a variable in /etc/rc.conf
  should be changed accordingly.

20060904:
  AFFECTS: users of net/samba3
  AUTHOR: timur@gnu.org

  Revision of Samba 3.0.23c port had changed location of the directory,
  where Samba stores its smbpasswd files, from $PREFIX/private to a more
  common $PREFIX/etc/samba.

  You need to move *.tdb files from an old to new location and remove old
  directory if you use tdbsam backend for Samba user authentication.

  Starting with the 3.0.23c release, the officially supported passdb
  backends (smbpasswd, tdbsam, and ldapsam) now operate identically with
  regards to the historical RID algorithm for unmapped users and groups
  (i.e. accounts not in the passdb or group mapping table). The resulting
  behavior is that all unmapped users are resolved to a SID in the
  S-1-22-1 domain and all unmapped groups resolve to a SID in the S-1-22-2
  domain. Previously, when using the smbpasswd passdb, such users and
  groups would resolve to an algorithmic SID in the machine's own domain
  (S-1-5-XX-XX-XX). However, the smbpasswd backend still utilizes the RID
  algorithm when creating new user accounts or allocating a RID for a new
  group mapping entry.

  With the changes in the 3.0.23c release, it is now possible to resolve
  a uid/gid, name, or SID in any direction and always obtain a symmetric
  mapping. This is important so that values for smb.conf parameters such
  as "valid users" resolve to the same SIDs as those included in the
  local user's initial token.

20060902:
  AFFECTS: users of japanese/uim-anthy and japanese/uim-canna
  AUTHOR: nobutaka@FreeBSD.org

  Input modes for uim-anthy and uim-canna are reorganized since version 1.2.0.
  Please re-configure the following keybindings with uim-pref:

    - off key
    - convert to halfwidth alphanumeric key
    - convert to fullwidth alphanumeric key
    - convert to halfwidth katakana key
    - halfwidth katakana mode key

20060902:
  AFFECTS: users of net-p2p/linuxdcpp
  AUTHOR: mezz@FreeBSD.org

  The name of binary, datadir, and docsdir have been renamed from ldcpp to
  linuxdcpp by the linuxdcpp developer.

20060831:
  AFFECTS: users of x11-wm/fluxbox-devel
  AUTHOR: mezz@FreeBSD.org

  The prefix has been changed, the fluxbox-devel now lives in LOCALBASE. You
  will need to download the fluxbox_prefix.sh script and run it as in your
  normal users that have ~/.fluxbox. The script only will replace old path to
  the new path; it does not affect on anything else.

    $ fetch http://people.freebsd.org/~mezz/script/fluxbox_prefix.sh
    $ sh fluxbox_prefix.sh

  It will creating a backup of ~/.fluxbox to ~/.fluxbox-bak. If everything
  work fine, then you can remove ~/.fluxbox-bak. If you have the different
  default of LOCALBASE and X11BASE, you can edit it in fluxbox_prefix.sh.

20060831:
  AFFECTS: users of games/warzone
  AUTHOR: alepulver@FreeBSD.org

  games/warzone port directory was renamed back to games/warzone2100 because
  the last version (2.0.4) uses the original name.

20060830:
  AFFECTS: users of textproc/p5-Senna
  AUTHOR: kuriyama@FreeBSD.org

  This version (0.50) of p5-Senna module breaks some compatibilities
  with the previous versions.

20060828:
  AFFECTS: users of devel/gpc
  AUTHOR: mi+mx@aldan.algebra.com

  devel/gpc port directory was renamed to devel/libgpc to avoid conflicting
  with lang/gpc.

20060828:
  AFFECTS: users of games/warzone2100
  AUTHOR: alepulver@FreeBSD.org

  games/warzone2100 port directory was renamed to games/warzone to match
  the port distfile and data directory.

20060827:
  AFFECTS: users of devel/perforce
  AUTHOR: lth@FreeBSD.org

  Perforce has been updated to version 2006.1. As usual, there has
  been significant schema upgrades, so even though upgrading to
  2006.1 is straightforward, it is still highly recommended to
  follow the upgrading instructions in the release notes:

    http://www.perforce.com/perforce/doc.061/user/relnotes.txt

20060818:
  AFFECTS: users of net/isc-dhcp3-server or net/isc-dhcp3-relay
  AUTHOR: Joerg.Pulz@frm2.tum.de

  Starting with version 3.0.5rc1 of the ISC DHCPD package, any running
  "dhcpd" or "dhcrelay" processes are stopped automatically when the port
  gets deinstalled.

  Please remember to start the services again manually, in case you upgrade
  from version 3.0.5rc1 or newer to any other version.

  Due to the better use of the USE_RC_SUBR framework, the rc script name may
  change from `isc-dhcpd.sh' or `isc-dhcrelay.sh' to `isc-dhcpd' or
  `isc-dhcrelay' depending on the FreeBSD version you use.

20060818:
  AFFECTS: users of www/gallery2
  AUTHOR: miwi@FreeBSD.org

  The default install location has changed from
  ${PREFIX}/www/data/gallery2 to ${PREFIX}/www/gallery2.

20060818:
  AFFECTS: users of sysutils/nut
  AUTHOR: Joerg.Pulz@frm2.tum.de

  Starting with nut-2.0.4, the megatec UPS driver has been backported from
  the development tree. Users of the following UPS drivers (powermust, blazer,
  fentonups, mustek, esupssmart, ippon, sms, masterguard) are encouraged to
  switch to the megatec UPS driver, which should replace all these drivers
  by nut-2.2 .
  For more information, please refer to ${LOCALBASE}/share/doc/nut/megatec.txt

20060815:
  AFFECTS: users of net/samba3
  AUTHOR: timur@gnu.org

  Since Samba 3.0.8, it has been recommended that all domain accounts
  listed in smb.conf on a member server be fully qualified with the
  domain name. This is now a requirement. All unqualified names are
  assumed to be local to the Unix host, either as part of the server's
  local passdb or in the local system list of accounts (e.g. /etc/passwd
  or /etc/group).

  If the member server is not running winbindd at all, domain
  accounts will be implicitly mapped to local accounts and their
  tokens will be modified appropriately to reflect the local
  SID and group membership.

20060804:
  AFFECTS: users of editors/jedit-devel
  AUTHOR: question+fbsdports@closedsrc.org

  Starting with jEdit 4.3pre6, jedit-devel now requires Java 1.5+ to be
  installed due to new features and classes used by the package. If you
  cannot install or use Java 1.5, you will need to stay with jEdit 4.2.

20060802:
  AFFECTS: users of www/linux-opera
  AUTHOR: mezz@FreeBSD.org

  The prefix has been changed, linux-opera now lives in LOCALBASE. Be sure to
  go in ~/.linux-opera/ and open a few of *.ini files to change all of this
  from "/usr/X11R6/share/linux-opera" to "/usr/local/share/linux-opera". Most
  of editors have 'search and replace' option, so use it or just use sed.

20060801:
  AFFECTS: users of www/b2evolution
  AUTHOR: chinsan.tw@gmail.com

  The default install location has changed from
  ${PREFIX}/www/data/b2evolution to ${PREFIX}/www/b2evolution.

20060801:
  AFFECTS: users of audio/libtunepimp and any port that depends on it
  AUTHOR: clsung@FreeBSD.org

  libtunepimp has been updated to 0.5. But it breaks some ports depend
  on it such as audio/juk and audio/amarok. To fix this kind of problem,
  try to install audio/libtunepimp-old, which is previous version of
  audio/libtunepimp.

20060731:
  AFFECTS: users of graphics/GraphicsMagick
  AUTHOR: mat@FreeBSD.org

  In order to fix a symbol collision between GraphicsMagick and libtidy,
  GraphicsMagick has been updated so that all its symbols are now prefixed
  with 'Gm'.  Consequently, all dependencies should be upgraded when you
  perform this upgrade with this command:

    portupgrade -rf graphics/GraphicsMagick

20060729:
  AFFECTS: users of net/nss_ldap
  AUTHOR: tmclaugh@sdf.lonestar.org

  The krb5_ccname option in ldap.conf has been fixed in the port so that it
  now works. Please be aware of this when updating if you have it in your
  config and are using GSSAPI when use_sasl is enabled. Using GSSAPI with a
  misconfigured krb5_ccname combined with one of the 'hard' bind_policy
  options can effectively lockout users.

20060728:
  AFFECTS: users of polish/ekg and polish/ibgadu
  AUTHOR: mwisnicki+freebsd@gmail.com

  If you have installed both ekg-1.6,2 and libgadu-20051229_1 then you should
  first deinstall them and install polish/ekg after that, e.g.:

    pkg_deinstall -f pl-ekg-\* pl-libgadu-\*
    portinstall polish/ekg

20060723:
  AFFECTS: users of www/dillo-i18n
  AUTHOR: tmseck@netcologne.de

  Starting with version 20060709 the i18n version of Dillo encodes
  the bookmark file using UTF-8 encoding. You can try to convert
  your existing bookmark file with the bm-update script or you could
  try to convert it by hand using iconv(1) from you current locale
  to UTF-8, e.g. by calling 'iconv -f ISO-8859-1 -t UTF-8 ~/.dillo/bm.txt'.

  Please see the iconv documentation for further details.

20060722:
  AFFECTS: users of games/phpua-*
  AUTHOR: miwi@FreeBSD.org

  The default install location has changed from
  ${PREFIX}/www/data/phpua-* to ${PREFIX}/www/phpua-*.

20060719:
  AFFECTS: users of mail/postfix
  AUTHOR: mnag@FreeBSD.org

  mail/postfix was updated to 2.3.0 and does no longer support POSTFIX_OPTIONS,
  please consider using "make config" to set your OPTIONS. The SPF patch was
  removed since this does not apply cleanly and has problems when using
  pipe(8). Consider using mail/postfix-policyd-spf instead of the SPF patch.

  If you need the Postfix 2.2 version you can find this in mail/postfix22.

20060715:
  AFFECTS: users of Aspell or its versions bundled with dictionaries
  AUTHOR: thierry@FreeBSD.org

  Since aspell-0.60.4_4, all dictionaries can be installed separately:

  - by default, textproc/aspell installs the English dictionaries (no
    change);
  - thereafter you can install any foreign dictionary;
  - when you install a foreign dictionary, e.g. french/aspell or
    textproc/da-aspell, it installs only the dictionaries, and depends
    upon textproc/aspell for the programs;
  - if you don't need the English dictionaries, you can define
    WITHOUT_DICTEN or install textproc/aspell-without-dicten.

20060714:
  AFFECTS: users of security/krb5
  AUTHOR: cy@FreeBSD.org

  As of MIT KRB5 1.5, Kerberos no longer supports static linking nor
  do the static libraries build. The reason for this is that KRB5 1.5
  implements plugins to implement functions. GSS-API is now implemented
  as a function. As such, the MIT Kerberos team has yet to implement
  plugins using static libraries. Users requiring static libraries or
  statically linked binaries are advised not to upgrade to this release
  until MIT provides a solution for statically linked binaries.

20060714:
  AFFECTS: users of www/mediawiki
  AUTHOR: clsung@FreeBSD.org

  www/mediawiki version is 1.7 now. 1.6 version was preserved on
  www/mediawiki16 port.

20060713:
  AFFECTS: users of x11-fonts/terminus-font
  AUTHOR: garga@FreeBSD.org

  Since version 4.20, terminus-font changed place to install fonts to
  ${PREFIX}/lib/X11/fonts/terminus-font, please, add this new path to your
  font paths.

20060711:
  AFFECTS: users of net/samba3
  AUTHOR: timur@gnu.org

  Starting from version 3.0.23 Samba no longer supports experimental
  SQL and XML passdb backends. If you need this functionality, please
  visit http://pdbsql.sourceforge.net/ (port is coming soon).

  The default mapping entries for groups such as "Domain Admins" are
  no longer created when using an smbpasswd file or a tdbsam passdb
  backend. Use 'net groupmap add' rather than 'net groupmap modify'
  to set these entries.

  A substring matching rule has been added to the sambaSID attribute
  definition. For OpenLDAP servers, this will require the addition
  of 'index sambaSID sub' to the slapd.conf configuration file. It
  will be necessary to run slapindex after making this change. There
  has been no change to actual data storage schema.

20060711:
  AFFECTS: users of games/linux-ut
  AUTHOR: netchild@FreeBSD.org, sean-freebsd@farley.org

  Some fixes for network play were done in UnrealTournament.ini
  There are two ways to fix it:
  1. The easy way is to remove the ${HOME}/.loki/ut directory, yet all
     local settings will be lost.
  2. The hard way: in ${HOME}/.loki/ut/UnrealTrounament.ini, under the
     [Core.System] section, SavePath, CachePath and multiple Paths
     variables should be replaced with the ones in (and in the same order
     as) ${PREFIX}/share/linux-ut/System/UnrealTournament.ini.

20060707:
  AFFECTS: users of www/lifetype
  AUTHOR: clsung@FreeBSD.org

  The default install location has changed from
  ${PREFIX}/www/data/lifetype to ${PREFIX}/www/lifetype.

20060706:
  AFFECTS: users of security/gnutls and any port that depends on it
  AUTHOR: novel@FreeBSD.org

  gnutls has been updated to 1.4.0 and all shared libraries' versions
  have been bumped. So you need to rebuild all applications that
  depend on gnutls. Do something like:

    portupgrade -rf gnutls

20060703:
  AFFECTS: users of audio/amarok
  AUTHOR: mich@FreeBSD.org

  A bunch of port options have been removed, so you should remove your
  current options, before attempting to build the port.

  - Enter the amarok port directory, and run `make rmconfig'

20060703:
  AFFECTS: users of sysutils/portupgrade
  AUTHOR: sem@FreeBSD.org

  Because portupgrade had a problem with detecting Berkley DB version 2
  or newer, and the default database format is now set to use these
  versions, you can end up with a portupgrade that does not work with
  older databases. A quick fix is to remove the databases, type:
  'rm /var/db/pkg/pkgdb.db /usr/ports/INDEX*.db'.
  portupgrade will recreate them automatically. It does absolutely no harm.

  If you do not want to remove the databases, you should detect what
  database type do you use, and set the port options for portupgrade
  accordingly.  Follow these instructions:

  - run 'pkgdb -fu' *before* upgrading and take a look on the output.
    You can see database format there as: format:XXX, where XXX is your
    current database format.
  - Go to portupgrade port directory and configure the port with
    `make config' command. If you have bdb_* format, then turn on the BDB4
    option. If you have bdb1_* format, then turn off BDB4 and turn on
    the BDB1 option. If you have dbd_hash format, then turn off all options.
  - Upgrade portupgrade.

  Note: if you change database format with changing port options,
  you should remove the ruby-bdb* port that you don't need anymore.
  Alternatively, you can hard code database format in your pkgtools.conf.

20060702:
  AFFECTS: users of multimedia/handbrake
  AUTHOR: multimedia@FreeBSD.org

  The GTK+2 version in the 0.7.x has been disabled by the author, because it
  does not work anymore. If you still want to keep with GTK+2 version, go
  with multimedia/handbrake-gtk2 (still 0.6.x) instead. The name of binary
  has been renamed to handbrake-gtk2 too.

20060701:
  AFFECTS: users of www/phpbb
  AUTHOR: miwi@FreeBSD.org

  The default install location has changed from
  ${PREFIX}/www/data/phpbb to ${PREFIX}/www/phpbb.

20060629:
  AFFECTS: users of www/mediawiki
  AUTHOR: miwi@FreeBSD.org

  The default install location has changed from
  ${PREFIX}/www/data-dist/mediawiki to ${PREFIX}/www/mediawiki.

20060624:
  AFFECTS: users of audio/mt-daapd
  AUTHOR: alex@foxybanana.com

  The default database directory has been changed to /var/db/mt-daapd. The
  default mp3 dir has been changed to ${PREFIX}/share/mt-daapd. Old
  configuration files will be maintained, if present, so no updating should
  be required.

20060624:
  AFFECTS: users of net/py-bittorrent-devel and net/py-bittorrent-core-devel
  AUTHOR: lioux@FreeBSD.org

  This version has been specially patched to enable
  launchmany-{console,curses}. This is experimental.

20060624:
  AFFECTS: users of net/py-bittorrent and net/py-bittorrent-core
  AUTHOR: lioux@FreeBSD.org

  launchmany-{console,curses} do not work under this version.

20060622:
  AFFECTS: users of www/dokuwiki
  AUTHOR: miwi@FreeBSD.org

  The default install location has changed from
  ${PREFIX}/www/data/dokuwiki to ${PREFIX}/www/dokuwiki.

20060622:
  AFFECTS: users of databases/mysql-client
  AUTHOR: ale@FreeBSD.org

  MySQL version 5.0 is now the default. If you have only the client
  port, you can upgrade all ports with:
    portupgrade -rfo databases/mysql50-client mysql-client

20060616:
  AFFECTS: users of all pfpro ports
  AUTHOR: aaron@FreeBSD.org

  The default certificate location has been changed to respect hier(7).
  The new default location is LOCALBASE/etc/pfpro/certs.

20060616:
  AFFECTS: users of net/openldap22{,-sasl}-client
  AUTHOR: linimon@FreeBSD.org

  OpenLDAP version 2.3 is now the default. To upgrade all ports do
    portupgrade -rfo net/openldap23-client openldap-client
  (or a similar command for the SASL variant). If you do not want to
  upgrade, add the line `WANT_OPENLDAP_VER?=22' to /etc/make.conf.

20060616:
  AFFECTS: users of emulation/linux_base-*
  AUTHOR: netchild@FreeBSD.org

  We now use Fedora Core 4 as the Linux base port, and the corresponding
  X.Org libraries for the Linux X11 libraries port.

  To upgrade you have to run:

    portupgrade -f -o emulators/linux_base-fc4 linux_base\*
    portupgrade -f -o x11/linux-xorg-libs linux-XFree86-libs

  You need to make sure that you have not changed the sysctl
  compat.linux.osrelease.  FC4 behaves differently depending on the
  contents of this sysctl.  Only the default value of this sysctl is
  supported.  In case of problems, please also revert to the default of
  the compat.linux.osname if it was changed.

  In case "printenv | grep LD_" prints something, e.g., LD_LIBRARY_PATH
  or LD_PRELOAD, you have to make sure it is not set when starting
  Linux programs, else FreeBSD libraries will be picked up and the
  programs do not start.

  After this start a Linux program to test, e.g., acroread.  If you get
  errors when starting Linux programs about problems with libraries, and
  you made sure no LD_* variable is set as described above, you are one of
  those unlucky people where we do not have a better solution as to tell
  you to deinstall every Linux port, remove /compat/linux completely to
  make sure no cruft is left and reinstall everything you need.

20060611:
  AFFECTS: users of www/c-icap
  AUTHOR: b3k@mail.ru

  The format of file c-icap.magic has changed. If you use your own
  c-icap.magic file remember to convert it to the new format. It can be done
  using the convert_old_magic.pl script located in the contrib directory.

20060605:
  AFFECTS: users of net/kdenetwork3
  AUTHOR: kde@FreeBSD.org

  The KDE multi-protocol instant messenger, Kopete, has been moved out
  of the net/kdenetwork3 port and is now available separately as
  net-im/kopete.

20060529:
  AFFECTS: users of net/quagga
  AUTHOR: lawrance@FreeBSD.org

  As of version 0.99.4, quagga no longer supports UCD-SNMP v4.  If you
  require this functionality, you should make alternative arrangements
  before upgrading quagga.

20060529:
  AFFECTS: users of mail/qmail-spamcontrol
  AUTHOR: garga@FreeBSD.org

  Updated to version 2.4.14 that brings a lot of news, most significant is
  STARTTLS support on smtpd and pop3d, if you want to use it, you need to
  install sysutils/ucspi-ssl-tls port that has the necessary patch applied.

  Remember to select STDERR option and rebuild security/clamav port, this is
  necessary to have the correct log on smtpd.

  After upgrade from 2.3.x you will need to set environment var SMTPAUTH to
  enable auth, you can set it as "login" or "crammd5" to set which auth you
  want.

20060528:
  AFFECTS: users of news/inn
  AUTHOR: shaun@inerd.com

  The 2.4.3 port of inn has an unfortunate bug which causes inn's database files
  to be erased during an uninstall or upgrade. Earlier versions are also
  affected. The latest port revision fixes this, but before upgrading, users are
  advised to move their ${PREFIX}/news/db directory out of the way, in order to
  save the history, active and newsgroups databases from destruction.

20060526:
  AFFECTS: users of security/amavisd-new
  AUTHOR: gkovesdan@t-hosting.hu

  The Clamav project recommended that security/clamav and security/clamav-devel
  should depend on archivers/unzoo instead of zoo, and on archivers/arj instead
  of unarj. Because the clamav and clamav-devel ports are used quite often with
  amavisd-new, this port was modified to depend on the same two archiver ports
  as well. The amavisd-new port automatically recognizes arj, but not unzoo, so
  ${PREFIX}/etc/amavisd.conf should be modified. This line should be changed:

    ['zoo', \&do_zoo,   'zoo'],

  To this one:

    ['zoo', \&do_zoo,   ['zoo','unzoo'] ],

20060526:
  AFFECTS: users of net/openldap23-server
  AUTHOR: delphij@FreeBSD.org

  The setting of SHELL backend has been inverted to off by default,
  because of the side effect it can cause. A new option, SLURPD
  has been added to give the user decision on whether the
  replication should be built and installed. Please note that the
  replication daemon is disabled when threading is disabled (e.g.
  when using shell backend), no matter what the user option SLURPD
  is set to.

  You are advised to do a "make config" in the net/openldap23-server
  directory *before* upgrading.

20060524:
  AFFECTS: users of games/spicetrade
  AUTHOR: hq@FreeBSD.org

  To comply with the Porter's Handbook recommendations, spicetrade port no
  longer defines USE_X_PREFIX. Hence the executable used to launch the game
  has moved to ${PREFIX}/bin/spicetrade (was ${X11BASE}/bin/spicetrade).

20060524:
  AFFECTS: users of java/jasmin
  AUTHOR: hq@FreeBSD.org

  The executable has been renamed to `jasmin' (was `jasmin.sh').

20060522:
  AFFECTS: users of astro/boinc-setiathome-enhanced,
       astro/boinc-setiathome-naparst, astro-boinc-setiathome
  AUTHOR: r.c.ladan@gmail.com

  As SETI@home doesn't generate work for 4.x clients anymore, the ports
  structure has been updated to use the 5.x client by default.

  People currently using any of the above ports should finish and report
  their existing work (both for normal and enhanced) and not allow any
  new work until after their ports are updated, to minimize loss of
  work.

  Note that this update changes the enhanced client to work for the
  normal instead of the beta project. When a beta client for Astropulse
  is released, it will work as the new client for the beta project.

20060518:
  AFFECTS: users of net/openldap23-server
  AUTHOR: delphij@FreeBSD.org

  The OpenLDAP 2.3.x series now automatically disables threading when
  shell backend is enabled, as suggested by the OpenLDAP developers.
  Users should be aware of the change and choose whether to enable
  the feature.

20060516:
  AFFECTS: users of www/tinyproxy
  AUTHOR: wxs@csh.rit.edu

  tinyproxy now installs a rc.d script.  To enable tinyproxy at boot
  time, set the following in rc.conf(5):

    tinyproxy_enable="YES"

  The configuration file for tinyproxy has been moved to
  ${PREFIX}/etc/tinyproxy.conf.  Any old configuration files will need
  to be migrated over to the new location.

20060514:
  AFFECTS: users of sysutils/smartmontools, others
  AUTHOR: jylefort@FreeBSD.org

  In FreeBSD 6.1, the ata(4) device ABI has changed. After updating to
  FreeBSD 6.1, ports which access ATA drives directly
  (sysutils/smartmontools, others) must be rebuilt.

20060512:
  AFFECTS: users of mail/fetchmail
  AUTHOR: barner@FreeBSD.org

  Fetchmail now has a rcNG script. It supports two modes:

   - one fetchmail instance per user: Set the `fetchmail_users'
     variable to a list of users for which you want to start
     fetchmail.
   - a global system wide daemon (runs per default as user
     `fetchmail')

  See $PREFIX/etc/rc.d/fetchmail for details.

20060509:
  AFFECTS: users of net-im/sulci
  AUTHOR: Denis Shaposhnikov <dsh@vlink.ru>

  After upgrading from version 0.5.a.20050918 you have to convert your
  vocabulary database to SQLite by issuing command:

    /usr/local/libexec/sulci/wtf_convert

  and change sulci's configuration file in "vocabulary" directive, see

    /usr/local/share/examples/sulci/sulci.conf.example

20060507:
  AFFECTS: users of net/isc-dhcp3-server with failover setup
  AUTHOR: Joerg.Pulz@frm2.tum.de

  Beginning with isc-dhcp3-server-3.0.4 a new field is added to the
  lease state structures found in the dhcpd.leases file.
  Please refer to ${PREFIX}/share/doc/isc-dhcp3-server/RELNOTES for
  further informations about this change and how you can update your
  dhcpd.leases file.

20060506:
  AFFECTS: users of PHP
  AUTHOR: ale@FreeBSD.org

  The old PHP slave ports (phpN-cli, phpN-cgi and mod_phpN) were removed
  in favor of unified PHP ports that allow building any combination of
  PHP SAPIs (cli, cgi and apache module).
  The PHP CGI binary was renamed to php-cgi, so you should update
  the path in your script. To simplify the update process, *only* for
  this release a 'php' compatibility symlink to php-cgi will be created
  if you don't select the CLI SAPI.
  Before the upgrade you *should* run 'make config' in lang/php4 or
  lang/php5 to configure the SAPIs you want to install.
  As a consequence the default binary packages include the CLI and the
  FastCGI SAPIs.

20060506:
  AFFECTS: users of lang/lua, editors/kile, x11/kdelibs3, x11/kdebase3
  AUTHOR: pav@FreeBSD.org, kde@FreeBSD.org

  Recently, the port of Lua was updated to version 5.1. This version is
  incompatible with the version 5.0, which is used in a number of applications,
  most notable in the Kile and Kate editors (the latter being part of a base
  KDE installation).

  If you're having troubles running those, such as error dialogs saying "Check
  your KDE installation", make sure to downgrade your lua installation back
  to 5.0:

    portupgrade -f -o lang/lua50 lua-5.1

20060501:
  AFFECTS: users of www/instiki
  AUTHOR: arsptr@optusnet.com.au

  The instiki port has changed storage methods to use an SQL database.
  The README contains instructions on how to migrate existing wiki data to the
  new storage methods. The following is a copy of the relevant information,
  tailored for FreeBSD port users:

  1. cd /usr/ports/www/instiki; make extract
  2. Execute
      ruby work/instiki-0.11.0/script/import_storage \
    -t /usr/local/instiki/storage/2500 \
    -i /usr/local/instiki \
    -d sqlite \
    -o [some location]/instiki_import.sql
  3. This will produce instiki_import.sql file in the specified location.
     Open it in a text editor and inspect carefully.
  4. Upgrade your instiki port normally (e.g. portupgrade)
  5. Connect to your production database, e.g.:
       sqlite3 /usr/local/instiki/db/production.db.sqlite3
     and have it execute instiki_import.sql, e.g.:
       .read [some location]/instiki_import.sql
  6. Execute
       ruby /usr/local/instiki/script/reset_references production
     (this script parses all pages for crosslinks between them, so it
     may take a few minutes)

20060429:
  AFFECTS: all GNOME users
  AUTHOR: gnome@FreeBSD.org

  GNOME has been updated to 2.14. This new release does NOT require the
  use of the gnome_upgrade.sh script. That script should not be used.
  Instead, use the following simple recipe:

    pkgdb -Ff
    portupgrade -o net/avahi -f howl
    portupgrade -o x11/gnome-screensaver -f xscreensaver-gnome
    portupgrade -a

20060425:
  AFFECTS: users of net-im/ejabberd
  AUTHOR: shaun@inerd.com

  ejabberd's UID and GID have changed. Users are advised to check all
  configuration files and data in /var/spool/ejabberd to ensure
  everything has the correct owner/group.

20060424:
  AFFECTS: users of devel/monotone
  AUTHOR: lapo@lapo.it

  Version 0.26 of monotone has many differences with past versions, there are
  changes in executable name, in repository and workspace format and also
  in the 'netsync' network protocol.
  A centralized "flagday" migration is needed in order to change format.
  Refer to ${PREFIX}/share/doc/monotone/UPGRADE for migration instructions.

20060418:
  AFFECTS: users of net/{ipw,iwi}-firmware
  AUTHOR: flz@FreeBSD.org

  Some changes in the way ipw(4) and iwi(4) work lead to fundamental
  changes in ipw-firmware and iwi-firmware ports. Since these drivers
  are now using loadable kernel modules as firmware, two new ports have
  been created: net/ipw-firmware-kmod and net/iwi-firmware-kmod.

  You should not be able to install the wrong one since detection is
  based on your FreeBSD version. Trying to install the wrong port will
  result in an error message (port marked as IGNORE).

20060413:
  AFFECTS: users of security/tor-devel
  AUTHOR: johans@FreeBSD.org

  The default data directory of tor-devel has been changed from
  /var/run/tor to /var/db/tor/data
  In order to keep your old server settings, you should either
  move the appropriate files to this directory manually,
  or set the tor_datadir variable accordingly in /etc/rc.conf

20060414:
  AFFECTS: users of www/horde, www/horde-php5, www/horde-passwd,
       deskutils/nag, deskutils/mnemo, deskutils/kronolith,
       mail/turba, mail/ingo, mail/imp, devel/chora
  AUTHOR: shaun@inerd.com

  The Horde ports no longer overwrite your existing configuration
  files during an upgrade: if you have modified any of the files in the
  config directory of any of these ports, they will be left untouched
  when you upgrade.

  It is recommended that the new .dist files are examined after an
  upgrade and any changes merged into your existing config files if
  necessary.

20060408:
  AFFECTS: users of www/linux-flashplugin*
  AUTHOR: hrs@FreeBSD.org

  These ports have been removed because the End User License Agreement
  explicitly forbids to run the Flash Player on FreeBSD.

  For more details, please visit this URL:

    http://www.macromedia.com/shockwave/download/license/desktop/

20060407:
  AFFECTS: users of sysutils/bacula*
  AUTHOR: dan@langille.org

  bacula-server now installs two rc.d scripts, one for the Director
  and one for the Storage Daemon. To enable the Director at boot time,
  set the following in /etc/rc.conf[.local]:

  bacula_dir_enable="YES"

  To enable the Storage Daemon, set the following in rc.conf(5):

  bacula_sd_enable="YES"

  Similarly, bacula-client also installs a rcNG script. To enable
  the File Daemon at boot time, set the following in rc.conf(5):

  bacula_fd_enable="YES"

  The old z-bacula.sh script in PREFIX/etc/rc.d should be removed.

20060403:
  AFFECTS: users of databases/db*
  AUTHOR: swhetzel@gmail.com

  Most of the ports that depend on Berkeley DB have been updated to use
  Mk/bsd.database.mk. Mk/bsd.database.mk is used to include MySQL, PostgreSQL,
  Berkeley DB, and SQLite in a port.

  The Berkeley DB support in Mk/bsd.database.mk is used to return the proper
  db* library name and location of the include and library directories of the
  requested version.

  To select a version of Berkeley DB, you can use either WITH_BDB_VER=<version>
  or ${UNIQUENAME}_WITH_BDB_VER=<version> (version is one of 3, 40, 41, 42, 43,
  or 44).

  When a port has USE_BDB defined as either 'USE_BDB=41+' or 'USE_BDB=yes', the
  port will use the oldest installed version of Berkeley DB. For example if
  both db41 and db43 are installed, the port would end up compiling with db41.
  If you add -DWITH_BDB_HIGHEST to your make command, the port will use highest
  db* instead. If no Berkeley DB is installed then the port will default to the
  version specified or the default Berkeley DB version (currently db41).

  NOTE: If a port was using a different variable to select Berkeley DB or a
  version, you will get an IGNORE message when you build the port. This
  message will tell you what you need to do.

  Port Maintainers please review the comments in Mk/bsd.database.mk on what
  variables are available for you use in your own ports.

20060331:
  AFFECTS: users of biology/emboss and biology/embassy
  AUTHOR: fernan@iib.unsam.edu.ar

  Since EMBOSS-3.0.0 both EMBOSS and EMBASSY install by default into
  $LOCALBASE/emboss to avoid conflicts with other ports.

  Users upgrading to 3.0.0 should take this into consideration when
  planning the upgrade, because it will involve moving data not
  installed by the port (databases) and tweaking the emboss.defaults
  config file.

  If you want to install the ports into $LOCALBASE (/usr/local, the old
  behavior), you can still do so by setting PREFIX manually. But you
  will have to take care of conflicting ports yourself.

20060330:
  AFFECTS: users of x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  The genkdmconf.sh rc-script has been removed in favor of a kdm wrapper
  script, which now handles both launching kdm and automatically updating or
  generating kdm's configuration files. The actual kdm binaries have been
  renamed to 'kdm-bin', 'kdm-bin_config' and 'kdm-bin_greet' respectively.

  These changes should be mostly transparent to kdm users and require no
  changes to existing configurations or setups, however: The actual kdm process
  is now also named 'kdm-bin', so 'killall kdm' will no longer work.

20060328:
  AFFECTS: users of sysutils/nut
  AUTHOR: Joerg.Pulz@frm2.tum.de

  Beginning with nut-2.0.3 the nut rcNG script only starts the ups driver and
  the ups daemon 'upsd'.

  The ups monitor 'upsmon' and the ups logger 'upslog' are now handled by
  separate scripts to get more control over the different services.
  Please take a look into the nut, nut_upslog and nut_upsmon scripts
  installed in ${PREFIX}/etc/rc.d/ for possible rc.conf values and their
  defaults.

20060322:
  AFFECTS: users of security/dazuko
  AUTHOR: ehaupt@FreeBSD.org

  Do not load the module using /boot/loader.conf. It generates a page fault due
  to a possible dazuko bug.

  You could use /etc/rc.local for loading the module. For example, add the
  following line to /etc/rc.local:

    /sbin/kldload dazuko

20060319:
  AFFECTS: users of graphics/py-exif
  AUTHOR: lawrance@FreeBSD.org

  The 'exiftool' utility from py-exif has been renamed to
  'py-exiftool' in order to avoid a conflict with p5-Image-ExifTool.

20060316:
  AFFECTS: users of textproc/docproj[-jadetex]
  AUTHOR: delphij@FreeBSD.org

  docproj now installs a set of CJK (Chinese, Japanese, Korean) related
  stuff in case that you have chosen to install the jadetex feature.
  Because the CJK part could be potentially large for those who do not
  want it, this feature can be disabled by defining WITHOUT_CJK=yes.

  Please be sure to update to the latest docproj package, as an upcoming
  doc/share/mk change will make use of the newly added fixrtf utility.

20060315:
  AFFECTS: users of www/horde, mail/turba and deskutils/kronolith
  AUTHOR: thierry@FreeBSD.org

  There are several points to check in your configuration files or in
  your database after upgrading Horde to 3.1, Turba to 2.1, and IMP to
  4.1; please read UPGRADING in their documentation directories.

20060315:
  AFFECTS: users of net-im/jabber
  AUTHOR: garga@FreeBSD.org

  After upgrade jabber-1.x to 1.4.4 you must to rewrite your
  ${PREFIX}/etc/jabber.xml based on new ${PREFIX}/etc/jabber.xml.dist
  installed by the port because it is not backwards compatible.

20060313:
  AFFECTS: users of multimedia/vcdimager and security/dirmngr
  AUTHOR: nork@FreeBSD.org

  These versions of the ports which have been installed in your
  system accidentally installed some malformed entries to
  $LOCALBASE/info/dir, which prevent them from being upgraded
  to the latest versions. Please remove the following entries
  manually from $LOCALBASE/info/dir before upgrading them to
  vcdimager-0.7.23_2 (and later) and dirmngr-0.9.3_2 (and later)
  respectively.

  multimedia/vcdimager
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  * VCDImager: (vcdimager).           GNU Video CD imaging utilities
  * cdxa2mpeg: (vcdimager)cdxa2mpeg.  Strip RIFF/CD-XA container
  * vcd-info:  (vcdimager)vcd-info.   Video CD diagnostic tool
  * vcdimager: (vcdimager)vcdimager.  Video CD simple formatter
  * vcdxbuild: (vcdimager)vcdxbuild.  Video CD XML formatter
  * vcdxgen:   (vcdimager)vcdxgen.    Video CD XML template generator
  * vcdxminfo: (vcdimager)vcdxminfo.  Display MPEG stream properties
  * vcdxrip:   (vcdxrip).             Video CD Ripping tool
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  security/dirmngr
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  * dirmngr: (gnupg).         X.509 CRL and OCSP server.
  * dirmngr-client: (gnupg).  X.509 CRL and OCSP client.
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

20060307:
  AFFECTS: users of print/acroread7 and the localized versions
  AUTHOR: hrs@FreeBSD.org

  Unfortunately, it turns out that printing feature of Adobe
  Reader 7.0.5 does not work with FreeBSD's Linux emulation
  environment for now. Although English, French, German,
  Japanese, and Korean version of the port were updated to
  7.0.5 on 2006/02/21, these changes have been reverted consequently.

  Please update the packages installed (normal upgrading procedure
  by using portupgrade(1) and so on should work). I am sorry for the
  confusion.

20060302:
  AFFECTS: users of net-im/jabber-pyicq and net-im/jabber-pymsn
  AUTHOR: garga@FreeBSD.org

  Port versions older than 0.7 and 0.11a respectively run as root which
  is an unneeded security risk.  Newer versions run as as user jabber,
  so before starting the daemons, you should fix permissions for each
  spooldir (default is /var/spool/jabber):

    # chown -R jabber:jabber spooldir/Transport_JID

20060223:
  AFFECTS: all ports using libtool as part of the build process
  AUTHOR: ade@FreeBSD.org

  The way in which ports that require libtool to build has been
  completely reworked to bring the ports system in line with other
  environments, such as Linux, and pkgsrc.

  devel/libtool13 no longer exists. devel/libtool15 has been modified
  to (a) install in the canonical locations and (b) remove a number
  of long-standing FreeBSD-specific patches that resulted in a very
  different libtool than is present on other systems.

  The main visible change will be that a large number of ports have
  had their plists modified (we now install libtool .la archives)
  and, as such, PORTREVISIONS have been bumped on ~2000 ports (roughly
  1/7th of the tree).

  Unfortunately, there is no simple upgrade path. Short of removing
  all packages and reinstalling from scratch, the only other viable
  alternative would be careful use of portupgrade. Given the large
  number of different ways in which libtool is used by other ports
  in the tree, this is a process that is likely to vary considerably
  from system to system, and as such, folks should be very mindful
  of running automatic updating software, such as portupgrade, making
  extensive use of the -n flag (and equivalents for other updaters)
  to see what will actually be rebuilt, before actually performing
  the upgrade.

  The good news is that the system now in place will make the handling
  of libtool-using ports considerably easier going forward.

20060221:
  AFFECTS: users of print/acroread7 and the localized versions
  AUTHOR: hrs@FreeBSD.org

  installation directory of print/acroread7 and the slave ports
  have been changed to ${PREFIX}/Adobe/Acrobat7.0/${ADOBE_LANG}.
  ${ADOBE_LANG} is one of CHS,CHT,DAN,DEU,ENU,ESP,FRA,ITA,JPN,KOR,
  NLD,NOR,PTB,SUO,SVE and represents language used in the UI (FRA means
  French version and it is installed by french/acroread, for example).
  To configure the UI language, navigate to Edit->Preferences->International->
  Application Language, set it to "Choose at application startup" and
  restart the program.

  The command filename is ${PREFIX}/bin/acroread as before (this is
  a script installed by print/acroreadwrapper now), and if multiple
  versions are installed, one of them will be selected according to
  ${ADOBE_LANG} environment variable. If ${ADOBE_LANG} is not set,
  it will be automatically set by using ${LANG}; this means when
  LANG=fr_FR.ISO8859-15, ADOBE_LANG will be FRA and the French version
  will be invoked by ${PREFIX}/bin/acroread. You can set ADOBE_LANG
  manually, too.

  Also, if you want to activate the PDF plugin, use --install-plugin
  option in ${PREFIX}/bin/acroread. For more detail, see
  print/acroreadwrapper/pkg-message.

20060220:
  AFFECTS: users of lang/perl5.8
  AUTHOR: tobez@FreeBSD.org

  lang/perl5.8 has been updated to version 5.8.8.  You should update
  everything that depend on perl.  The easiest way to do it is to use
  perl-after-upgrade script supplied with lang/perl5.8.  Please see
  its manual page for details.

20060220:
  AFFECTS: users of x11-wm/enlightenment
  AUTHOR: vanilla@FreeBSD.org

  enlightenment 0.16 change binary name from 'enlightenment' to 'e16'.
  you should change it on your .xinit file.

20060212:
  AFFECTS: users of mail/dcc-dccd
  AUTHOR: ehaupt@FreeBSD.org

  The midnight dccm and dccifd system log message has been changed to disclose
  spam passed from whiteclnt-listed MX servers. MX servers should now be listed
  in /var/dcc/whiteclnt with lines like:

        mx      ip      10.2.3.4
        mx      ip      10.5.6.0/28
        mxdcc   ip      10.7.8.9

  "MX" marks the IP address of one of your mail systems that should be ignored
  in initial Received: headers and when reported by sendmail to dccm. "MXDCC"
  marks IP addresses of your mail systems that run DCC clients and that will
  have already reported mail to the DCC. Continue using "OK" whitelist entries
  for mail systems that you trust to never send or forward unsolicited bulk
  email. Allow custom DNS blacklist SMTP rejection messages. See
  -Bset:rej-msg=X in the dccifd and dccm man pages.

20060207:
  AFFECTS: users of www/jakarta-tomcat4, www/jakarta-tomcat41,
       www/jakarta-tomcat5, www/jakarta-tomcat55, and www/tomcat55
  AUTHOR: lawrance@FreeBSD.org

  The Tomcat ports listed above have been converted to use new-style
  rc scripts. In order to enable Tomcat, you must add:

    tomcat{4,41,5,55}_enable="YES"

  to your rc.conf. Select the appropriate version number for your
  installation. When shutting down, the rc scripts will kill the
  Tomcat process after a default timeout of 10 seconds. This can be
  changed by setting the tomcatXX_stop_timeout variable in rc.conf.

  Tomcat 5.5 users please note that the rc variables have changed name
  from jakarta_tomcat55_* to tomcat55_*.

  The "tomcatctl" executable is no longer installed. Please use the
  rc scripts to control tomcat instead.

20060202:
  AFFECTS: users of textproc/expat2
  AUTHOR: kuriyama@FreeBSD.org

  Users of expat2 (and its many dependencies) should do the following to
  properly update expat2 and all of its dependencies:

    portupgrade -rf textproc/expat2

20060201:
  AFFECTS: users of sysutils/xmbmon
  AUTHOR: jylefort@FreeBSD.org

  The tty program (mbmon) was moved into a separate port, sysutils/mbmon.

20060201:
  AFFECTS: users of x11/tilda
  AUTHOR: barner@FreeBSD.org

  The configuration file syntax has changed. Users of x11/tilda must
  delete their old ones and re-create them.

20060131:
  AFFECTS: users of security/stunnel
  AUTHOR: roam@FreeBSD.org

  Since stunnel-4.14_1, the stunnel.pem certificate generated by
  "make cert" is installed into /usr/local/etc/stunnel/ instead of
  /usr/local/etc/.

20060130:
  AFFECTS: users of sysutils/portsnap
  AUTHOR: cperciva@FreeBSD.org

  Due to configuration file changes, users of portsnap are encouraged
  to copy the latest sample configuration file into place after updating
  portsnap to version 1.0:

    # cd /usr/local/etc && cp portsnap.conf.sample portsnap.conf

20060126:
  AFFECTS: ports that use Display Postscript libraries and xorg-libraries
  AUTHOR: x11@FreeBSD.org

  Support for Display Postscript has been deprecated in X.Org 6.9 release
  and libraries and tools are no longer installed by default. If you have
  installed a port that complains about missing libdpstk or libpsres, you
  need to reinstall it so it will be build without DPS support.

20060123:
  AFFECTS: users of mail/qmail, mail/qmail-ldap, mail/qmail-mysql,
       mail/qmail-spamcontrol, mail/qmail-tls and all dependant
       ports.
  AUTHOR: garga@FreeBSD.org

  If you use qmail installed on a PREFIX different from /var/qmail,
  please set variable in /etc/make.conf named QMAIL_PREFIX to this
  value.  It'll be used for many ports that depends of qmail.

  To prevent stale dependencies, when you use one of qmail slave ports,
  now you just need to set variable named QMAIL_SLAVEPORT in /etc/make.conf
  with the name of slave port you are using assigned to it.

  The valid options for now are: ldap, mysql, spamcontrol, tls.

20060114:
  AFFECTS: users of www/apache13-ssl with suexec enabled.
  AUTHOR: clement@FreeBSD.org

  The port has been converted to new apache framework, using bsd.apache.mk.
  suexec knobs have changed to WITH_SUEXEC and SUEXEC_*. See Mk/bsd.apache.mk
  for more details.

20060113:
  AFFECTS: users of multimedia/qvamps
  AUTHOR: lioux@FreeBSD.org

  Some program location pathnames have been corrected. Therefore,
  a new configuration file has to be generated. First, close qvamps.
  Then, remove the previous configuration file. Finally, start qvamps
  again. The configuration file can be removed with:

    $ rm ~/.qvamps/qvampsrc

20060112:
  AFFECTS: users of mail/postfix, mail/postfix1, mail/postfix21,
       mail/postfix-current
  AUTHOR: mnag@FreeBSD.org

  Now all postfix ports use rcNG script to startup. If you have any file
  in etc/rc.d directory linked to sbin/postfix, please remove.
  Do not forget to add 'postfix_enable="YES"' in your rc.conf

20060112:
  AFFECTS: users of security/gnutls and any port that depends on it
  AUTHOR: novel@FreeBSD.org

  gnutls has been updated to 1.2.9 and all shared libraries' versions
  have been bumped. So you need to rebuild all applications that
  depend on gnutls. Do something like:

    portupgrade -rf gnutls

20060111:
  AFFECTS: users of multimedia/lxdvdrip
  AUTHOR: lioux@FreeBSD.org

  lxdvdrip has been updated to version 1.51, which depends on port
  multimedia/vamps.  However, multimedia/vamps needs to know beforehand
  how many bytes will be processed in order to work.  Unfortunately,
  lxdvdrip cannot provide such information.  Therefore, vamps and
  playcell specific tailored versions shipped within the lxdvdrip
  distribution will be used.  They will be named so that lxdvdrip does
  not conflict with multimedia/vamps.  This is for lxdvdrip version
  1.51_1.

  However, users that used lxdvdrip previously to this update, are
  required to modify their configuration file in order to comply to the
  new naming scheme.

    File: ~/.lxdvdrip.conf
    From: play_cell_name=play_cell
      vamps_name=vamps
    To:   play_cell_name=play_cell_lxdvdrip
      vamps_name=vamps_lxdvdrip

20060111:
  AFFECTS: users of devel/perforce
  AUTHOR: lth@FreeBSD.org

  Perforce has been updated to version 2005.2.  As usual, there has been
  significant schema upgrades, so even though upgrading to 2005.2 is
  straightforward, it is still highly recommended to follow the upgrading
  instructions in the release notes:

    http://www.perforce.com/perforce/doc.052/user/relnotes.txt

20060110:
  AFFECTS: users of www/drupal
  AUTHOR: brooks@FreeBSD.org

  The default install location has changed from PREFIX/www/data/drupal
  to PREFIX/www/drupal. Users who want to use the old location can set
  the DRUPDIR variable to www/data/drupal.

20060109:
  AFFECTS: users of databases/postgresql??-server
  AUTHOR: girgen@FreeBSD.org

  All PostgreSQL versions have been updated.  These patch releases fix a
  problem with character string comparisons for locales that consider
  different character combinations as equal, such as Hungarian.  This might
  require "REINDEX" to fix existing indexes on textual columns.  Also, if
  plperl is used, a "REINDEX" might be required under certain conditions.
  Check the HISTORY file in the source distribution for details.

20060108:
  AFFECTS: users of x11/kdelibs3, x11/kdebase3, deskutils/superkaramba,
       x11-themes/kde-windeco-smoothblend, irc/kvirc, editors/vimpart
  AUTHOR: kde@FreeBSD.org

  A number of files have been moved from kdebase to kdelibs between KDE
  3.4.3 and KDE 3.5.0 and some applications which used to be distributed
  separately from KDE have been included in the release.

  This means that you will have to take some precautions in order to
  update your KDE installation without interruptions.

  We recommend sticking to the following procedure.  This procedure requires
  you to have sysutils/portupgrade installed and to be the superuser (or
  use sudo).

  1) Delete installed packages which conflict with the updated KDE
     ports:

    pkg_deinstall -f kdebase-\[0-9\]\* superkaramba-\[0-9\]\* \
    kde-windeco-smoothblend-\[0-9]\* kvirc-\[0-9\]\* \
    kdeaddons-vimpart-\[0-9\]\*

  2) Now update the remaining KDE ports:

    portupgrade -O arts\* kde\* \*kde-i18n\*

     or, if you want to update KDE along with other updated ports:

    portupgrade -a

  3) Reinstall the KDE ports you deleted in step 1:

    portinstall -O kdebase

  Superkaramba is now included in misc/kdeutils3.  The smoothblend window
  decoration is now included in x11-themes/kdeartwork3.  Vimpart is being
  discontinued and is no longer part of KDE.

  KNOWN ISSUES:
  =============

  Just like KDE 3.4, KDE 3.5 does not play nice with openssl-0.9.8.  In
  particular it breaks Kwallet, some of the SSL handling in Konqueror, and
  SSL/TLS support in KMail/Kontact.

  If you're using the openssl ports rather than the base-system openssl,
  make sure to use security/openssl-stable.

  You can put WITH_OPENSSL_STABLE=yes into /etc/make.conf to automatically
  make ports depend on that rather than on security/openssl.

  FreeBSD 4.X users MUST install openssl-stable even if the base OpenSSL is
  present for SSL/TLS support in KMail/Kontact to work.  Unfortunately, the
  kdepim3 port cannot depend on it automatically due to shortcomings/bugs
  in Ports Collection's OpenSSL infrastructure.

20060106:
  AFFECTS: users of deskutils/kronolith <= 2.0.6 with MCAL backend
  AUTHOR: thierry@FreeBSD.org

  Beginning with release 2.1, the support of MCAL will be removed
  from Kronolith. To prepare your migration, you can already switch
  to a SQL back-end, with the script provided at
  /usr/local/www/horde/kronolith/scripts/migrate_to_sql_driver.php.

20060105:
  AFFECTS: users of mail/fetchmail >= 6.3.0
  AUTHOR: barner@FreeBSD.org

  Beginning with release 6.3.0, fetchmail not only needs write
  access to the idfile ($HOME/.fetchids), but also to the directory
  holding this file. For end users running fetchmail with default
  idfile on their own account, nothing changes: they have write
  access to their home directory.

20060105:
  AFFECTS: users of www/wwwoffle, security/ipsec-tools
  AUTHOR: edwin@FreeBSD.org

  The startup of the rc.d scripts for these two ports are now
  by default disabled.

20051228:
  AFFECTS: users of multimedia/tovid
  AUTHOR: lioux@FreeBSD.org

  tovid shell scripts relies heavily on bash(1) but the previous
  port version tried to use sh(1). However, since there were too
  many complications, the port now depends on shells/bash.

  Due to this change, the configuration files need to be regenerated.
  Please, erase all previous configuration files. The configuration
  file samples will be generated on the 1st invocation of the
  scripts:

    $ rm ~/.tovid/*

20051228:
  AFFECTS: users of shells/scponly
  AUTHOR: rushani@FreeBSD.org

  From scponly 4.2, scp & WinSCP compatibilities are not enabled by default.
  To enable those compatibilities, define WITH_SCPONLY_SCP and/or
  WITH_SCPONLY_WINSCP, respectively.

20051225:
  AFFECTS: users of p5-libapreq2
  AUTHOR: vanilla@FreeBSD.org

  libapreq2 can be pure c library, I believe some people need pure c library,
  but hate mod_perl, so I split it to 2 ports, and set libapreq2 as
  p5-libapreq2's master ports.

  If you need pure library of libapreq2, install www/libapreq2.
  If you like mod_perl & enjoy p5-libapreq2, install/www/p5-libapreq2.

20051213:
  AFFECTS: users of pear ports
  AUTHOR: ale@FreeBSD.org

  A few old pear ports have been removed from the tree in favor of a single
  devel/pear port.  If portupgrade complains about missing ports, you may
  safely remove pear-XML_RPC, pear-Console_Getopt, pear-Archive_Tar, and
  php[45]-pear and then run:

    portupgrade -o devel/pear -f pear-PEAR

20051212:
  AFFECTS: users of net/ntop
  AUTHOR: wxs@csh.rit.edu

  ntop now installs an rcNG script. It also logs to syslog by default.  To
  enable ntop at boot time, set the following in rc.conf(5):

    ntop_enable="YES"

20051210:
  AFFECTS: users of net/mldonkey-devel
  AUTHOR: lioux@FreeBSD.org

  MLDonkey port net/mldonkey-devel has been patched to work with
  the updated lang/ocaml version 3.09. As a result, ocaml 3.09
  is now a requirement. You have to follow the instructions for
  updating your complete ocaml installation outlined below on
  20051201 by burelle@lri.fr.

  If you use the command below, everything should be fine.

    $ portupgrade -fr 'ocaml*' 'mldonkey-*devel*'

20051210:
  AFFECTS: users of mail/fetchmail using SSL encryption
  AUTHOR: barner@FreeBSD.org

  Fetchmail now checks the validity of server certificates and complains
  verbosely in maillog if the validation fails.

  If your mail server's certificate is not signed by one of the root
  authorities, you have to manually configure them using the following steps:

    * Download the necessary certificates in PEM format and store them
      at a suitable location, e.g. /home/user/.certs

    * Run the c_rehash tool on the freshly installed certificates:

      - If you are using OpenSSL from the base system (this is the default)
    use the following command:
    % perl /usr/src/crypto/openssl/tools/c_rehash /home/user/.certs

      - If you are using OpenSSL from security/openssl please use command:
    % c_rehash /home/user/.certs

    * Use the following options to enable SSL encryption in your .fetchmailrc
      configuration file:

      options ssl sslcertpath /home/user/.certs sslcertck
          sslfingerprint '< fingerprint >'
          < other options >

20051208:
  AFFECTS: users of net/py-bittorrent and net/py-bittorrent-core
  AUTHOR: lioux@FreeBSD.org

  Developer renamed most BitTorrent command line scripts:

  * btdownloadgui.py -> bittorrent.py
  * btdownloadheadless.py -> bittorrent-console.py
  * btdownloadcurses.py -> bittorrent-curses.py
  * btmaketorrentgui.py -> maketorrent.py
  * btmaketorrent.py -> maketorrent-console.py
  * btlaunchmany.py -> launchmany-console.py
  * btlaunchmanycurses.py -> launchmany-curses.py
  * bttrack.py -> bittorrent-tracker.py
  * btreannounce.py -> changetracker-console.py
  * btrename.py has been REMOVED, use maketorrent*.py
  * btshowmetainfo.py -> torrentinfo-console.py

  Check http://www.bittorrent.com/bittorrent_versions.html

20051207:
  AFFECTS: users of {japanese,chinese,korean}/FreeWnn-*
  AUTHOR: hrs@FreeBSD.org

  {ja,zh,ko}-FreeWnn-server now use the new rc.subr(8) framework
  for their startup script. Note that to invoke each Wnn daemon at
  boot time you have to set the following variables in rc.conf(5)
  respectively:

  wnn_enable
  kwnn_enable
  twnn_enable
  cwnn_enable

20051203:
  AFFECTS: users of www/apache2
  AUTHOR: clement@FreeBSD.org

  www/apache2 port directory was renamed to www/apache20 to keep
  consistency with other apache ports.

20051203:
  AFFECTS: users of www/apache22 and any web apps porters
  AUTHOR: clement@FreeBSD.org

  www/apache22 stop supporting ${LOCALBASE}/www/(data|error|cgi)(|-dist)
  directory layout in favor of ${LOCALBASE}/www/apache22/(data|error|cgi).
  FYI, ports layout may change soon.

20051202:
  AFFECTS: users of www/plone and cmf oriented zope modules
  AUTHOR: filippo.natali@gmail.com

  www/plone has been updated to the latest 2.1.1 version. Some
  zope modules are unfortunately incompatible with this version
  of plone.

20051202:
  AFFECTS: users of security/racoon and security/ipsec-tools
  AUTHOR: lawrance@FreeBSD.org

  security/racoon has been removed. You should migrate to its
  replacement, security/ipsec-tools. No configuration changes will
  be required.

  The default configuration file location has changed for ipsec-tools.
  You will need to move your racoon configuration files to the new
  location /usr/local/etc/racoon. Alternatively, add this line in
  rc.conf to continue using the old location:

  racoon_flags="-f /usr/local/etc"

20051201:
  AFFECTS: users of lang/ocaml
  AUTHOR: burelle@lri.fr

  Upgrade to 3.09.0 will break binary compatibility at link time, so any
  library build with old versions should be rebuild in order to be
  usable (standalone binaries do not require rebuild since they are
  statically linked.)

20051129:
  AFFECTS: users of devel/monotone
  AUTHOR: lapo@lapo.it

  Keys are now stored in ~/.monotone/keys/.
  You must run 'db migrate' against each of your databases;
  this will automatically migrate the keys.
  Command line syntax for 'serve' has changed; please adjust
  startup scripts accordingly.
  See /usr/local/share/doc/monotone/NEWS for details.

20051123:
  AFFECTS: users of www/lighttpd
  AUTHOR: delphij@FreeBSD.org

  A change has been committed against www/lighttpd, which flips the
  meaning of the IPV6 option to match other ports, along with the
  1.4.7 upgrade. If you have previously saved configuration that
  checks the IPV6 option (meaning to disable IPv6), then you will
  have to rerun the configuration with ``make config''.

  The default setting for IPV6 build is kept, which was enabled by
  default.

20051113:
  AFFECTS: users of x11/xterm, x11/xorg-clients, x11/XFree86-4-clients
  AUTHOR: x11@FreeBSD.org

  Xterm no longer installs with '-static' prefix. Users should upgrade
  XFree86-clients to 4.5.0_1 or xorg-clients to 6.8.2_1 or newer before
  attempting upgrade of xterm to 206_1 or newer. Previous versions remove
  xterm on deinstall so CONFLICTS have been set accordingly.

20051105:
  AFFECTS: users of x11-toolkits/qt33
  AUTHOR: kde@FreeBSD.org

  If the compilation of qt fails due to uic segfaulting

  (example:
  /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.5/bin/uic -L
  /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.5/plugins
  listboxeditor.ui -i listboxeditor.h -o listboxeditor.cpp
  *** Signal 11)

  delete your old .qt directories:

  rm -r ~/.qt /root/.qt

20051105:
  AFFECTS: all users of gnome/glib/gtk
  AUTHOR: gnome@FreeBSD.org

  GNOME has been updated to 2.12 and gtk/glib to 2.8.
  DO NOT USE portupgrade(1) to update your ports. Instead, use
  the gnome_upgrade.sh script from
  http://www.marcuscom.com/downloads/gnome_upgrade212.sh

20051104:
  AFFECTS: users of www/trac
  AUTHOR: rui@ruilopes.com

  The Trac database schema was changed between versions 0.8 and 0.9. This
  port also started to use PySQLite 2 (SQLite 3). Existing environments
  must be upgraded before they can be used with Trac 0.9.

  The canonical update procedure for existing trac environments is:

    $ export TRAC_ENV=/path/to/trac/env
    $ # backup existing trac environment
    $ cp -Rp $TRAC_ENV $TRAC_ENV.backup # backup existing trac env
    $ # convert database from SQLite 2 to SQLite 3 format
    $ mv $TRAC_ENV/db/trac.db $TRAC_ENV/db/trac2.db
    $ sqlite $TRAC_ENV/db/trac2.db .dump | sqlite3 $TRAC_ENV/db/trac.db
    $ # upgrade trac environment
    $ /usr/local/bin/trac-admin $TRAC_ENV upgrade
    $ /usr/local/bin/trac-admin $TRAC_ENV resync
    $ /usr/local/bin/trac-admin $TRAC_ENV wiki upgrade

  Consult the full upgrade instructions at:

    http://projects.edgewall.com/trac/wiki/TracUpgrade

20051013:
  AFFECTS: users of www/mediawiki
  AUTHOR: garga@FreeBSD.org

  www/mediawiki has now version 1.5. 1.4 version was preserved on
  www/mediawiki14 port.

  If you want to preserve your 1.4 installation, run this:

    # portupgrade -o www/mediawiki14 -f mediawiki

20051013:
  AFFECTS: users of mail/qmrtg
  AUTHOR: mij@bitchx.it

  Version 2.x marks a new generation for qmrtg and is no longer compatible
  with configuration files from old releases.

  Upgrading to 2.x version *requires* qmrtg (and possibly mrtg)
  configuration files to be adjusted manually starting from the .dist file
  included.

20051011:
  AFFECTS: users of www/amphetadesk
  AUTHOR: lioux@FreeBSD.org

  www/amphetadesk can only be ran under a user with a valid home
  directory since it stores its configuration information there.

20051010:
  AFFECTS: users of games/py-slune
  AUTHOR: mnag@FreeBSD.org

  games/py-slune has been removed to add in games/slune to
  reflect right name.

20051010:
  AFFECTS: users of devel/apache-ant
  AUTHOR: hq@FreeBSD.org

  The Ant launcher script now uses javavmwrapper to pick a suitable JDK. Hence
  it is no longer needed to define JAVA_HOME for Ant to run. You may rather use
  and combination of JAVA_VERSION, JAVA_OS and JAVA_VENDOR. See javavm(1) for
  further information. However, you may still override this behavior using
  JAVACMD.

  The ANT_INCLUDE_SHARED_JARS variable used to be effective only when set to
  "YES" (case sensitive). It is now a defined/undefined switch and thus will be
  effective if defined, regardless of its value.

20051009:
  AFFECTS: users of games/py-balazar
  AUTHOR: mnag@FreeBSD.org

  games/py-balazar has been removed to add in games/balazar to
  reflect right name.

20051008:
  AFFECTS: users of sysutils/rdiff-backup, rdiff-backup-devel
  AUTHOR: lawrance@FreeBSD.org

  sysutils/rdiff-backup has been upgraded to version 1.0.1. This
  version is incompatible with the previous version. Users of
  rdiff-backup will need to redo their initial seed.

  rdiff-backup-devel has been removed. Users of rdiff-backup-devel
  should now use rdiff-backup instead. In this case there is no need
  to redo the initial seed.

20051006:
  AFFECTS: users of net/smokeping
  AUTHOR: lth@FreeBSD.org

  Smokeping has undergone a major upgrade to version 2.0.3. If you
  are upgrading from versions 1.x, the manpage 'smokeping_upgrade'
  may be of help. To verify the configuration file syntax, run
  'smokeping --check'.

20051005:
  AFFECTS: users of x11-wm/devilspie
  AUTHOR: jylefort@FreeBSD.org

  The configuration file format has changed. See
  /usr/X11R6/share/doc/devilspie/README for more details.

20051002:
  AFFECTS: users of x11-toolkits/py-wxPython26

  wxPython 2.6 has been split into py-wxPython26, py-wxPython26-unicode
  and py-wxPython26-common. Everyone should update to the new structure.

  # remove previous installation
  1) pkg_delete 'py24-wxPython*2.6*'

  # update to new version
  2) cd /usr/ports/x11-toolkits/py-wxPython26

  3) make install clean

20050927:
  AFFECTS: users of mail/dovecot
  AUTHOR: robin@isometry.net

  Dovecot has been upgraded to version 1.0a3, which breaks backwards
  compatibility with previous versions of Dovecot.  For information about
  upgrading existing Dovecot installations, please consult with the
  following document:

    http://wiki.dovecot.org/moin.cgi/UpgradingDovecot

20050923:
  AFFECTS: users of www/b2evo
  AUTHOR: chinsan.tw@gmail.com

  Database schema changed. Rerun the installation script, which can usually
  be found at http://your.site.com/b2evo/blogs/install

20050911:
  AFFECTS: users of mail/libspf2, mail/postfix, mail/postfix21,
       mail/postfix-policyd-spf, mail/exim
  AUTHOR: marcus@corp.grupos.com.br

  Now version 1.0.4 of libspf2 has repo copied from mail/libspf2 to
  mail/libspf2-10 and mail/libspf2 has updated to 1.2.5.
  mail/exim depends on mail/libspf2 and mail/postfix, mail/postfix21
  and mail/postfix-policyd-spf depends on mail/libspf2-10.

20050907:
  AFFECTS: users of databases/metakit
  AUTHOR: adamw@FreeBSD.org

  The metakit build now enables python support by default. Everybody who
  was happy with their python-less metakit should begin specifying
  METAKIT_WITHOUT_PYTHON=yes on build.

20050904:
  AFFECTS: users of games/pvpgn
  AUTHOR: mek@mek.uz.ua

  sql_DB_layout.conf-sample: includes changes needed for the new "username"
  SQL field; if you update to 1.7.8, you MUST update this file too if you
  have your accounts in SQL.

  bnetd.conf-sample: changed "servaddrs" directive to not be totally commented
  and be as ":" by default in bnetd.conf (if "servaddrs" is commented this
  means "bnetd" will not listen for b.net services at all).

20050902:
  AFFECTS: users of www/jakarta-tomcat55
  AUTHOR: hq@FreeBSD.org

  The port installs a new RCng startup script which no longer uses tomcat55ctl
  to control the Tomcat daemon. Furthermore, the behavior of Tomcat may be
  configured through switches and variables from /etc/rc.conf. They are
  documented in the header of the RCng script:

    ${PREFIX}/etc/rc.d/jakarta-tomcat55.sh

20050902:
  AFFECTS: users of mail/postfix-current
  AUTHOR: marcus@corp.grupos.com.br

  Now mail/postfix-current use OPTIONS menu instead of POSTFIX_OPTIONS batch.
  Please run "make config" and select your desired options in the menu.

20050828:
  AFFECTS: users of net/py-bittorrent-devel and net/py-bittorrent-core-devel
  AUTHOR: lioux@FreeBSD.org

  Developer renamed most BitTorrent command line scripts:

  * btdownloadgui.py -> bittorrent.py
  * btdownloadheadless.py -> bittorrent-console.py
  * btdownloadcurses.py -> bittorrent-curses.py
  * btmaketorrentgui.py -> maketorrent.py
  * btmaketorrent.py -> maketorrent-console.py
  * btlaunchmany.py -> launchmany-console.py
  * btlaunchmanycurses.py -> launchmany-curses.py
  * bttrack.py -> bittorrent-tracker.py
  * btreannounce.py -> changetracker-console.py
  * btrename.py has been REMOVED, use maketorrent*.py
  * btshowmetainfo.py -> torrentinfo-console.py

  Check http://www.bittorrent.com/bittorrent_versions.html

20050804:
  AFFECTS: users of sysutils/kdeadmin3
  AUTHOR: kde@FreeBSD.org

  One data file has been moved from kdeadmin to kdelibs between
  KDE 3.4.1 and KDE 3.4.2. This means that

  *********if you currently have the kdeadmin port installed*********

  you will have to take some precautions to update your KDE
  installation.

  We recommend sticking to the following procedure. This procedure requires
  you to have sysutils/portupgrade installed and to be the superuser (or using
  sudo).

  1.) Delete installed packages which conflict with the updated KDE
      ports:

    pkg_deinstall -f kdeadmin-\[0-9\]\*

  2.) Now update the remaining KDE ports:

    portupgrade -O arts\* kde\* \*kde-i18n\*

      or, if you want to update KDE along with other updated ports:

    portupgrade -a

  3.) Reinstall the KDE ports you deleted in step 1:

    portinstall -O kdeadmin

20050728:
  AFFECTS: users of sysutils/sge and sysutils/sgeee
  AUTHOR: brooks@FreeBSD.org

  A port of SGE 6 has been installed in sysutils/sge. SGE 6 is
  significantly different from SGE 5 and an upgrade is only possible
  by removing the SGE 5 install and replacing it. The SGE vs SGEEE
  distinction has been removed in SGE 6 so the sgeee port was removed.
  The sge and sgeee ports were repo copied to sge53 and sgeee53
  respectively and existing installations may continue to use them.

20050727:
  AFFECTS: users of databases/firebird-server
  AUTHOR: skv@FreeBSD.org

  Changes in layout:
  * database directory has changed from /usr/local/firebird to /var/db/firebird
  * configuration files are placed in /usr/local/etc/firebird
  * common utilities have been moved to /usr/local/bin
  * suid-ed binaries have been moved to /usr/local/sbin

  Update inetd.conf/xinetd.conf to reflect new location of "fb_inet_server".

20050722:
  AFFECTS: all RELENG_6 and HEAD users of ports/packages, maintainers
       of ports that interact with the compat libraries.
  AUTHOR: kensmith@FreeBSD.org

  The shared library version number of all shared libraries built as
  part of the baseline system has been incremented in both RELENG_6
  and HEAD. The overall goal is to make handling of the compat library
  infrastructure easier. Each new release branch will have different
  version numbers for all of the shared libraries and the compat ports
  can simply include all of the shared libraries from the previous
  release.

  If you update your system using normal cvsup/rebuild/reinstall
  mechanisms the old versions of the libraries will still be on your
  system so your old ports executables will continue to work.
  But you definitely should plan on recompiling and reinstalling all
  of your installed ports so they get relinked against the new libraries.
  If you don't take this step as time goes on "normal" updates and
  installs run the risk of having executables relying on both the new
  and old versions of the libraries which would cause big problems.

  It will take some time for the pre-built packages available on the
  FTP mirror sites to be rebuilt against the new libraries. If you
  want to update your ports using the pre-built packages watch the
  mailing lists for when the rebuilt packages become available.

20050710:
  AFFECTS: users of x11-toolkits/qt33, x11/kdelibs3
  AUTHOR: kde@FreeBSD.org

  If you have compiled qt33 with the KDE_OPTIONS option checked (if your
  installed qt-package is called qt-copy-3.3.4 instead of qt-3.3.4, check
  with pkg_info), you should cvsup and recompile qt33 and everything
  depending on it:

    portupgrade -rf qt\*

  Previous versions of the qt33 port contained a patch that
  introduces binary incompatibility between unpatched qt33 and software
  compiled against a patched qt33.

  Symptoms of the binary incompatibility: Unresolved symbol warnings from
  various KDE/Qt applications (both during runtime or compiling/linking),
  "Could not start kdeinit" dialogs during KDE startup, kicker crashes during
  exiting KDE.

20050630:
  AFFECTS: users of x11/nvidia-driver
  AUTHOR: danfe@FreeBSD.org

  Due to several complaints, new (unsupported) option had been added to port
  Makefile: WITH_LEGACY_GPU_SUPPORT. Starting with version 7667, NVidia has
  dropped support for numerous "legacy" GPUs, while this option allows to go
  with previous version of driver (this does not apply to older versions of
  FreeBSD, since you have to use version 6113 of driver (if you did not yet
  upgraded to FreeBSD 5.3 or later) which has support for those GPUs).

  If you must use WITH_LEGACY_GPU_SUPPORT option, be sure to ``hold'' the
  package by making appropriate entry in your pkgtools.conf, otherwise
  portupgrade(1) will upgrade your port to latest NVidia release on the
  next run, which is probably not what you want.

  Refer to x11/nvidia-driver/Makefile for further details.

20050625:
  AFFECTS: users of sysutils/nut
  AUTHOR: Joerg.Pulz@frm2.tum.de

  nut now installs a rcNG script for starting the Network UPS Tools daemons.
  To enable that at boot time, add the following into /etc/rc.conf[.local]:

  nut_enable="YES"

20050624:
  AFFECTS: users of lang/perl5.8
  AUTHOR: tobez@FreeBSD.org

  lang/perl5.8 has been updated to 5.8.7. You should update everything
  depending on perl. The easiest way to do that is to use
  perl-after-upgrade script supplied with lang/perl5.8. Please see
  its manual page for details.

20050622:
  AFFECTS: users of ftp/proftpd-*
  AUTHOR: flz@FreeBSD.org

  ProFTPd binary moved from ${PREFIX}/libexec to ${PREFIX}/sbin. People
  using proftpd with inetd must use ${PREFIX}/sbin/in.proftpd (or
  ${PREFIX}/sbin/proftpd which is just the same). Read the commit log
  and diffs for more information.

20050621:
  AFFECTS: users of net/cacti
  AUTHOR: sem@FreeBSD.org

  Because of users need to keep their DB configuration but config.php
  can't be saved on upgrading, I've moved DB settings in db-settings.php.
  So, you need to change db-settings.php and do not touch config.php
  anymore.

20050618:
  AFFECTS: users of alternate linux_base ports
  AUTHOR: netchild@FreeBSD.org

  The Ports Collection now allows to override the default linux_base port.

  Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
  ${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
  ${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).

20050610:
  AFFECTS: users of ftp/wget built with SSL (default)
  AUTHOR: sf@FreeBSD.org

  wget 1.10 now authenticates certificate of remote host before making a
  SSL connection. To make it work, you should have working CA root
  certificates list in /etc/ssl/cert.pem.

  If you don't have it there are options:
  a) install security/ca-roots port and you have done.
  b) install ftp/curl port and symlink it to /etc/ssl/cert.pem.
      ln -s /usr/local/share/curl/curl-ca-bundle.crt /etc/ssl/cert.pem
  c) put your favorite one into certain place.

20050601:
  AFFECTS: users of devel/perforce
  AUTHOR: lth@FreeBSD.org

  Upgrading to 2005.1 is straightforward, but it is highly recommended
  to follow the upgrading instructions in the release notes:
    http://www.perforce.com/perforce/doc.051/user/relnotes.txt

20050526:
  AFFECTS: users of mail/sylpheed-claws
  AUTHOR: netchild@FreeBSD.org

  Sylpheed-claws is updated to the GTK2 version now. This results in a new
  configuration directory. To keep your configuration from the GTK1 version
  you can
      cp -rp ~/.sylpheed .sylpheed-gtk2
  before starting the GTK2 version for the first time, or
      cp -Rp ~/.sylpheed .sylpheed-gtk2/
  when you have run the GTK2 version already.

20050524:
  AFFECTS: users of multimedia/mpeg4ip and multimedia/mpeg4ip-libmp4v2
  AUTHOR: ahze@FreeBSD.org

  Starting with version 1.3 mpeg4ip-libmp4v2 installs libmp4av that mpeg4ip
  previously installed. It is advised to de-install mpeg4ip-libmp4v2 and
  mpeg4ip before updating to mpeg4ip-1.3 or mpeg4ip-libmp4v2-1.3. If you
  have already updated mpeg4ip-libmp4v2 and mpeg4ip you should deinstall
  mpeg4ip and reinstall mpeg4ip-libmp4v2 before updating mpeg4ip.

  This does not affect users who just have mpeg4ip-libmp4v2 installed
  and not mpeg4ip.

20050523:
  AFFECTS: users of games/pvpgn
  AUTHOR: mek@mek.uz.ua

  The following has been changed in the bnetd.conf file (starting with
  version 1.7.7):

    - The old config variable `servername' has been renamed to `hostname'
    - A new `servername' config variable has been introduced for server
      identification

20050519:
  AFFECTS: users of www/squid
  AUTHOR: tmseck@netcologne.de

  Starting with 2.5.10, the cachemgr.cgi program uses a configuration file
  cachemgr.conf to control which hosts this program is allowed to manage.
  To prevent abuse, the configuration defaults to "localhost" only.
  Please see cachemgr.cgi(8) for further details.

20050517:
  AFFECTS: users of www/mod_perl2 and all ports depending on it
  AUTHOR: lars.eggert@gmx.net.

  API changed for mod_perl2 -- existing code will break!
  The mod_perl2 developers have significantly changed the API
  in release candidate 2.0.0-RC5. These changes include changed
  names for core packages, causing software that uses the old API
  to fail with the new version. You need to update your code as
  described in http://perl.apache.org/docs/2.0/rename.html

20050517:
  AFFECTS: users of databases/firebird
  AUTHOR: freebsd@galle.com.br

  The port was split into a -server and -client parts.
  The -server contains server binary, UDFs, and install all in
  ${PREFIX}/firebird. The -client contains libs, includes,
  client binaries, docs and examples. For migration delete
  the firebird port and install the -server and/or -client port
  afterwards.

20050512:
  AFFECTS: users of devel/svk
  AUTHOR: rafan@infor.org

  Since SVK 0.30, it is fast enough and PPerl causes some problems.
  Thus, the SVK port no longer supports WITH_PPERL knob.
  If you still want to use PPerl with it, please go and read:
  http://svk.elixus.org/?SVKAndPPerl for details.

20050511:
  AFFECTS: users of multimedia/ffmpeg{,-devel}
  AUTHOR: lioux@FreeBSD.org

  The latest FreeBSD CVS snapshot has been committed under
  multimedia/ffmepg-devel. In order to build it, you need to deinstall
  any ffmpeg ports first:

    # pkg_deinstall multimedia/ffmpeg

  Furthermore, video capture is no longer working in the latest
  version. Work is been done to overcome this.

20050511:
  AFFECTS: users of databases/postgresql??-(server|contrib)
  AUTHOR: girgen@FreeBSD.org

  The PostgreSQL ports have been updated to latest versions. A
  security problem in the template database requires a simple SQL
  command to be run on each database. Because these problems are
  really incorrect system catalog entries, updating to a new release
  will NOT by itself solve the problems in an existing
  installation.

  See http://www.postgresql.org/about/news.315 for details.

20050501:
  AFFECTS: users of lang/ocaml based applications and libraries
  AUTHOR: lioux@FreeBSD.org

  With the recent update of ocaml to 3.08.3 some API compatibility
  has been broken. It is a bit subtle so that some users might not
  notice it. However, updating all ocaml based applications and
  libraries are advised using the new compiler/interpreter version.
  Issue the following command:

    # portupgrade -rf 'ocaml*'

20050426:
  AFFECTS: users of mail/courier-authlib
  AUTHOR: oliver@FreeBSD.org

  mail/courier-authlib has been moved to security/courier-authlib and is
  now only a meta-port. Installing the meta-port installs security/
  courier-authlib-base and no, one or more sub-ports regarding to what
  authentication methods you've chosen. Courier-authlib-base only
  provides you authentication via PAM. All ports depending on courier-
  authlib (at the time of writing, courier-imap, sqwebmail and maildrop)
  giving you the same choice the meta-port provides you.

20050421:
  AFFECTS: users of www/opera-devel
  AUTHOR: avleeuwen@piwebs.com

  Opera 8.0 final has been released and can be installed via the
  www/opera port. The opera-devel port is now deprecated. If you want
  to continue using the personal settings you used with www/opera-devel,
  issue this command:

    # mv ~/.opera-devel ~/.opera

20050421:
  AFFECTS: users of www/opera
  AUTHOR: avleeuwen@piwebs.com

  Opera has been updated to 8.0. If are upgrading from version 7.x or
  below, it is recommended that you backup your personal ~/.opera
  directory and remove it, like this:

    # cp -Rp ~/.opera ~/.opera-bak
    # rm -rf ~/.opera

  After that, you can put your bookmarks, email, contacts, etc. back in
  ~/.opera/. The most important files are your bookmarks
  (~/.opera/opera6.adr) and your emails (~/.opera/mail). It is not a good
  idea to put opera6.ini, userstyle.ini, search.ini, pluginpath.ini and other
  non-personal stuff back in ~/.opera/. If you need custom settings,
  reconfigure Opera from the Preferences pane or edit the files by hand.

20050420:
  AFFECTS: users of www/ipython
  AUTHOR: dryice@liu.com.cn

  There are backwards incompatible changes introduced for pysh:

  1. You must update your pysh profile (~/.ipython/ipythonrc-pysh):
     a) Add to it the line:
    import_all IPython.Extensions.InterpreterExec
     b) Delete the line:
    execfile pysh.py
  2. You must also delete from ~/.ipython/ the file pysh.py.

20050419:
  AFFECTS: users of www/linux-opera
  AUTHOR: mezz@FreeBSD.org

  Opera has been updated to 8.0. If you are upgrade from version 7.x or
  below, it is recommended for you to backup your personal ~/.linux-opera
  directory and remove it. It can be done following from the command line:

    # cp -Rp ~/.linux-opera ~/.linux-opera-bak
    # rm -rf ~/.linux-opera

  After that, you can put your bookmark, email, contacts and etc back in
  ~/.linux-opera/. The bookmark is ~/.linux-opera/opera6.adr and the email
  is ~/.linux-opera/mail as you can figure out by view in ~/.linux-opera/.
  It is probably not good idea to put opera6.ini, userstyle.ini, search.ini,
  pluginpath.ini and other non-personal stuff back in ~/.linux-opera/. The
  non-personal stuff should be re-configure on new stuff by either Opera
  preferences in GUI or hand (manual) in your editor.

20050415:
  AFFECTS: users of net-mgmt/cricket
  AUTHOR: ijliao@FreeBSD.org

  As of 2004/11/09 cricket uses a separate user "wwwadm". If you
  upgrade your installation, make sure you chown your existing data.

20050414:
  AFFECTS: users of databases/postgresql and any port that depends on it
  AUTHOR: girgen@FreeBSD.org

  The PostgreSQL ports are updated to 8.0.2. All shared libraries'
  versions have been bumped, so you will need to recompile all client
  applications that depend on libpq.so. The recommended way to
  upgrade from 8.0.x would be something like

    portupgrade -rf postgresql-client

20050413:
  AFFECTS: users of mail/spamd
  AUTHOR: delphij@FreeBSD.org

  spamd now installs a rcNG script for starting the OpenBSD pf spamd daemon.
  To enable that at boot time, add the following into /etc/rc.conf[.local]:

  pfspamd_enable="YES"

20050413:
  AFFECTS: users of www/quixote
  AUTHOR: dryice@liu.com.cn

  There are backwards incompatible changes introduced when upgrading from
  version 1.2 to 2.0, including renaming quixote.form to quixote.form1 and
  quixote.form2 to quixote.form.  Please refer to upgrading.txt in the
  documentation directory for details.

20050411:
  AFFECTS: users of x11/gdm
  AUTHOR: kwm@FreeBSD.org

  GDM now installs a rcNG script for starting the gdm daemon.
  To enable that gdm starts a boot time, add the following to /etc/rc.conf:

  gdm_enable="YES"

20050406:
  AFFECTS: users of databases/mysql50-server
  AUTHOR: ale@FreeBSD.org

  The base database directory can now be set and changed in rc.conf (default:
  /var/db/mysql). If you used to set DB_DIR to a different value during port
  compilation, you must specify it via the new "mysql_dbdir" rc variable.
  In addition, the "mysqllimits_enable" and "mysqllimits_args" variables
  have been replaced by "mysql_limits" for consistency.

20050403:
  AFFECTS: users of net/tac_plus4
  AUTHOR: marcus@FreeBSD.org

  Tac_plus4 now installs an rcNG script for starting the tac_plus daemon.
  To enable tac_plus to start at boot time, add the following to /etc/rc.conf:

  tac_plus_enable="YES"

  You can also pass flags to tac_plus by setting the rc.conf variable
  tac_plus_flags. The default flags are "-C ${PREFIX}/etc/tac_plus.conf".

  Additionally, the default version of IOS for tac_plus has been changed from
  11.x to 12.x.

20050324:
  AFFECTS: users of net/mDNSResponder
  AUTHOR: brooks@FreeBSD.org

  In mDNSResponder 98_1, mdnsd is no longer started by default due to a
  switch to an rc.subr startup script. To start it, you must add add
  mdnsd_enable="YES" to your /etc/rc.conf or other suitable
  configuration file.

20050320:
  AFFECTS: users of x11/kde3, x11/kdelibs3, x11/kdebase3,
    x11-themes/kdeartwork3, www/akregator, x11-themes/phase,
    multimedia/kdemultimedia3
  AUTHOR: kde@FreeBSD.org

  In KDE 3.4, a number of files were moved between ports, some ports
  were added, one port has been removed and some applications formerly available
  in their own ports were incorporated into KDE. This means that you will have
  to take some precautions to update your KDE installation. A simple
  portupgrade -a will not work.

  Portupgrade -R kde can fail as well, depending on what parts of KDE you
  have currently installed. We therefore recommend sticking to the following
  procedure. The procedure requires you to have sysutils/portupgrade installed
  and you to be the superuser (or using sudo). We recommend not being logged in
  to a KDE session on the machine you're performing the upgrade on. If you
  choose to perform the update while being logged in to KDE, expect erratic
  behavior and crashes from applications launched until you log out and back
  in.

  1.) Delete installed packages which conflict with the updated KDE
      ports:

        pkg_deinstall -f kdeartwork-\[0-9\]\* kdebase-\[0-9\]\* \
    kdebase-konqueror-nsplugins-\[0-9\]\* kdewebdev-\[0-9\]\* \
    kde-\[0-9\]\* akregator\* phase\*

  2.) Now update the remaining KDE ports:

        portupgrade -O arts\* kde\* \*kde-i18n\*

      or, if you want to update KDE along with other updated ports:

        portupgrade -a

  3.) Reinstall the KDE ports you deleted in step 1:

        portinstall -O kdebase kdeartwork kdewebdev

   Changes in detail:

    - www/akregator is now included into deskutils/kdepim3.
    - x11-themes/phase is now included in x11-themes/kdeartwork3.
    - www/konqueror-nsplugins has been removed and is now integrated into
      x11/kdebase3.
    - Juk has been split out of multimedia/kdemultimedia3 and is now
      available as audio/juk.
    - Akode has been split out of multimedia/kdemultimedia3 and is now
      available as audio/akode and audio/akode-plugins-*. Akode is also
      a default dependency of multimedia/kdemultimedia3 now.
    - audio/mpeglib_artsplug has been demoted to legacy status and is no
      longer the default decoder backend for kdemultimedia3. It's also not
      depended on by kdemultimedia3 by default anymore.

  Known post-updating issues:

  - If you're missing acoustic notifications (system sounds) after the update:

        rm ~/.kde/share/config/knotifyrc

    Then log out of KDE and back in again (also see
    http://freebsd.kde.org/faq.php#q16).

  - kdm users might get warnings from kdm about obsolete lines in kdmrc.
    You can migrate your configuration while preserving your customizations
    by running (as root or with sudo)

        genkdmconf

    Make sure to backup your old kdm configuration (usually found in
    /usr/local/share/config/kdm) beforehand in case the merge produces an
    invalid configuration. Especially note that kdm does not use the Xservers
    file anymore. A genkdmconf run will merge its contents into kdmrc.

  Extensive information about changes and new features of KDE 3.4 can be found
  at http://developer.kde.org/development-versions/kde-3.4-features.html. Bugs
  can be reported at http://bugs.kde.org.

20050320:
  AFFECTS: users of sysutils/portsnap
  AUTHOR: cperciva@FreeBSD.org

  As a result of shifting from SHA-1 to SHA-256, the structure of
  portsnap's configuration file and compressed snapshot have both
  changed. After upgrading to portsnap 0.9, you will have to
  update your configuration file ($PREFIX/etc/portsnap.conf) and
  delete your existing portsnap compressed snapshot:

    # cd /usr/local/etc && cp portsnap.conf.sample portsnap.conf
    # rm -r /usr/local/portsnap/*

  In addition, be aware that the next runs of "portsnap fetch" and
  "portsnap update" will take far longer than usual, since they
  will need to download and extract a complete copy of the ports
  tree.

20050319:
  AFFECTS: users of databases/postgresql7[34]-server
  AUTHOR: girgen@FreeBSD.org

  The startup script has been merged from 8.0 to 7.3 and 7.4.  Hence, to
  start the PostgreSQL server at boot time (regardless of version), add the
  following to /etc/rc.conf:

    postgresql_enable=yes

20050318:
  AFFECTS: users of x11-wm/blackbox, x11-wm/boxtools, x11-wm/bbkeys, and
    x11-wm/bbpager
  AUTHOR: A.J.Caines@halplant.com

  The new blackbox ports include several changes to use and configuration.
  Please read the pkg-message files in the respective ports for details.

20050315:
  AFFECTS: users of databases/mysql323-server
  AUTHOR: ale@FreeBSD.org

  The MySQL daemon must now be enabled/disabled in rc.conf.
  The base database directory can now be set and changed in rc.conf (default:
  /var/db/mysql). If you used to set DB_DIR to a different value during port
  compilation, you must specify it via the new "mysql_dbdir" rc variable.
  See the script for details.

20050314:
  AFFECTS: users of databases/mysql40-server
  AUTHOR: ale@FreeBSD.org

  The base database directory can now be set and changed in rc.conf (default:
  /var/db/mysql). If you used to set DB_DIR to a different value during port
  compilation, you must specify it via the new "mysql_dbdir" rc variable.
  In addition, the "mysqllimits_enable" and "mysqllimits_args" variables
  have been replaced by "mysql_limits" for consistency.

20050313:
  AFFECTS: users of games/netpanzerdata, games/netpanzer
  AUTHOR: mad@madpilot.net

  The netpanzerdata port has changed its name to netpanzer-data, so before
  installing the new one you will need to remove the old netpanzerdata-0.1.3
  port.

20050312:
  AFFECTS: all users who have glib/gtk/gnome libraries installed
  AUTHOR: ahze@FreeBSD.org and the FreeBSD GNOME team

  GNOME has been upgraded to version 2.10 and gtk/glib to version 2.6.  DO
  NOT USE portupgrade(1) to update any gnome or gtk or any port that
  depends on them.  Using portupgrade will cause problems and you will have
  to manually upgrade your ports.  Please use the gnome_upgrade.sh
  script from here:

    http://www.FreeBSD.org/gnome/gnome_upgrade.sh

20050309:
  AFFECTS: users of mail/maildrop
  AUTHOR: sergei@FreeBSD.org

  maildrop has been recently upgraded to 1.8.0. This version
  has the following changes:

  - Maildir quota is now enabled by default.
    The following options were deleted:
    - WITH_MAILDIRQUOTA
    - WITH_TRASHQUOTA
  - New option WITH_AUTHLIB is added, which provides optional support for
    Courier Auth Library (mail/courier-authlib port).
  - Userdb authentication, LDAP and MySQL support are provided through
    courier-authlib now, thus the following options
    - WITH_USERDB
    - WITH_LDAP
    - WITH_MYSQL
    have been superseded by WITH_AUTHLIB.

20050306:
  AFFECTS: users of math/ploticus
  AUTHOR: linimon@FreeBSD.org

  ploticus is now installed as bin/ploticus rather than bin/pl to
  avoid useless conflicts with other ports.

20050303:
  AFFECTS: users of net/i2p
  AUTHOR: lioux@FreeBSD.org

  The newest i2p version 0.5.0.1 is incompatible with all previous
  versions. Follow these procedures if you are updating from a
  previous port version. You can ignore these if you are installing
  i2p for the first time.

  1) Update i2p port to the new one
  2) Use the i2prouter script to uninstall i2p from user account.
     You are going to lose all your configuration:

    $ i2prouter uninstall

  3) Install the new i2p version:

    $ i2prouter install

20050301:
  AFFECTS: users of sysutils/ganglia-monitor-core
  AUTHOR: brooks@FreeBSD.org

  With the move to Ganglia 3.0.0, the configuration file for gmond has
  changed completely. The -r or --convert options may be used to
  emit a file in the new format given one in the old.

  Startup is now controlled by an RC_SUBR script so the gmond_enable and
  gmetad_enable variables will need to be set for gmond and gmetad to be
  started. Existing gmond.sh and gmetad.sh scripts in PREFIX/etc/rc.d
  should be removed.

  Due to a bug in ganglia's build process, the previous version may need
  to be removed before ganglia can be upgraded.

20050224:
  AFFECTS: users of lang/ruby18 and any apps that depend on ruby18
  AUTHOR: mezz@FreeBSD.org

  The theads support has been disabled again. It causes the more trouble, so
  it now builds with ${PTHREAD_CFLAGS} and ${PTHREAD_LIBS}. It is recommend
  you to rebuild any apps that depend on lang/ruby18. Do something like this:

    portupgrade -rf ruby-1.8.2\*

20050224:
  AFFECTS: users of www/apache21
  AUTHOR: clement@FreeBSD.org

  When upgrading from 2.1.2, you need to rebuild all apache modules.

20050215:
  AFFECTS: users of databases/mysql41-server
  AUTHOR: ale@FreeBSD.org

  The base database directory can now be set and changed in rc.conf (default:
  /var/db/mysql). If you used to set DB_DIR to a different value during port
  compilation, you must specify it via the new "mysql_dbdir" rc variable.
  In addition, the "mysqllimits_enable" and "mysqllimits_args" variables
  have been replaced by "mysql_limits" for consistency.

20050214:
  AFFECTS: users of net-mgmt/nagios
  AUTHOR: blaz@si.FreeBSD.org

  Nagios has been upgraded to 2.0.b2. Native support for storing various types
  of data (status, retention, comment, downtime, etc.) in MySQL and PostgreSQL
  has been dropped. There are also multiple changes to the format of
  configuration files. Carefully read
  http://nagios.sourceforge.net/docs/2_0/whatsnew.html before upgrading.

20050213:
  AFFECTS: users of print/teTeX-*
  AUTHOR: hrs@FreeBSD.org

  print/teTeX-* are now based on teTeX 3.0. Although some reliability fixes
  are also added, here are several common problems which you might fall on.

  1) $PREFIX/bin/pdftex is missing:

    Probably your system has old files included teTeX 2.x which can
    prevent the new version from working. Please remove the old files
    first (see entry 20050206 in this file) and reinstall.

  2) Some formats are still corrupted (for example, "Fatal format file error;
     I'm stymied" is displayed) or not updated even after a clean install:

    You might have old or corrupted *.fmt and/or *.map files under
    /root/.texmf-* or $HOME/.texmf-* directories. Typically these
    directories are generated when you invoke the updmap(1), texconfig(1),
    or fmtutil(1) utility manually. However, for a period after the first
    revision of the teTeX-base port erroneously used fmtutil(1) to
    regenerate *.fmt files, you could have these directories without your
    intent. In such a case, please remove these directories and reinstall
    the ports (it is not needed to rebuild ports/packages).  Just for your
    information, $HOME/.texmf-config and $HOME/.texmf-var can be used for
    your personal configuration.

  If you have other problems, please contact hrs@FreeBSD.org.

20050212:
  AFFECTS: users of x11-fonts/mkbold, x11-fonts/mkitalic, and
       x11-fonts/mkbold-mkitalic
  AUTHOR: koma2@ms.u-tokyo.ac.jp

  The dependency on x11-fonts/mkbold and x11-fonts/mkitalic has been
  switched over to x11-fonts/mkbold-mkitalic, which is written in C
  and has far better performance than the old ones. There is no
  functional difference between the two, but they will conflict with
  each other. Since other ports which depend on x11-fonts/mkbold or
  x11-fonts/mkitalic will be updated to depend on x11-fonts/mkbold-mkitalic,
  you might get an error during upgrading such ports. In such a case,
  please pkg_delete the old ones first.

20050206:
  AFFECTS: users of print/teTeX and japanese/teTeX
  AUTHOR: hrs@FreeBSD.org

  print/teTeX is now based on a teTeX 3.0 release candidate
  (2.99.13.20050204) and the other related ports are also updated.
  Since upgrading from previous versions should be done at a time,
  you may want to use the portupgrade utility or reinstall
  print/teTeX after deinstalling all of the related ports.

  If your teTeX environment became broken during the upgrade,
  please see the following URL which explains how to fix it.

  http://people.freebsd.org/~hrs/tetex-upgrade.txt

  This file also includes notes for people who are familiar
  with the teTeX distribution to explain structure of the ports.

20050205:
  AFFECTS: users of lang/ruby16_r, lang/ruby18_r, and lang/ruby18
  AUTHOR: knu@FreeBSD.org

  The slippery pthread support for systems prior to 502102 has been
  dropped and lang/ruby16_r and lang/ruby18_r ports have been removed,
  since no one seems to appreciate the partially working solution.

  Good news is that the pthread support of lang/ruby18 is now enabled
  by default for newer systems, which means the Ruby interpreter is
  linked with libpthread. This will allow threaded extension
  libraries to run and work properly on those systems.

20050201:
  AFFECTS: users of lang/perl5 and lang/perl5.8
  AUTHOR: tobez@FreeBSD.org

  lang/perl5 has been updated to 5.6.2, and lang/perl5.8 has been
  updated to 5.8.6. You should update everything depending on perl, that
  is:

    * first, upgrade your Perl installation (use either lang/perl5 or
      lang/perl5.8, the latter being recommended);
    * for FreeBSD 4.X, run "use.perl port", so that the system knows you
      have 5.8.6 or 5.6.2; this step is not needed on FreeBSD 5.X and
      FreeBSD -CURRENT;
    * run some magic incantations to upgrade all ports depending on perl,
      that is run something like:
      portupgrade -f `(pkg_info -R perl-5\* | tail +4; \
    find /usr/local/lib/perl5/site_perl/5.[68].[1245] -type f -print0 \
    | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //') | sort -u`
      This is likely to fail for a few ports, you'll have to upgrade them
      afterwards by hand.

20050130:
  AFFECTS: users of PostgreSQL
  AUTHOR: girgen@FreeBSD.org

  Each of the PostgreSQL ports have been split into a server and a client
  part.  Please use postgresqlNN-server and/or postgresqlNN-client as
  needed.  Versions currently supported are 7.3, 7.4, and 8.0.

  To start the PostgreSQL server at boot time, add the following line to
  /etc/rc.conf:

    postgresql_enable=yes

  The maintenance script is installed in etc/periodic/daily, and is
  controlled by a set of new knobs in periodic.conf.  Use it for vacuuming
  your databases and getting daily backups.  Note that daily vacuuming is
  on by default.  See the script for details.

20050130:
  AFFECTS: users of net/howl
  AUTHOR: marcus@FreeBSD.org

  Howl now installs an rcNG script for starting mDNSResponder. To enable
  mDNSResponder to start at boot time, add the following to /etc/rc.conf:

    mdnsresponder_enable="YES"

  You can also pass flags to mDNSResponder by setting the rc.conf variable
  mdnsresponder_flags to the appropriate value. See the mDNSResponder(8)
  man page for the list of supported flags. The default is not to pass
  any flags to mDNSResponder.

20050126:
  AFFECTS: users of x11-wm/xfce4
  AUTHOR: oliver@FreeBSD.org

  If you use X.Org 6.8.1: Make sure there is an /tmp/.ICE-unix with propper
  rights.  For further information about that, please refer to the entry
  20041229 in this file.  Please update all your plugins as well when you
  update Xfce from version 4.0.6 to 4.2.  They all need recompiling to link
  against the new Xfce libraries.

20050122:
  AFFECTS: users of PostgreSQL
  AUTHOR: seanc@FreeBSD.org

  The -devel port has been updated to contain 8.0 release since
  postgresql80-server can not be updated until 4.11 is released and the
  changes in PR ports/75344 are committed. Users who need 8.0 now can
  use the -devel port, however, once postgresql80-server has been
  committed, -devel will begin tracking 8.1. Please be smart about
  tracking ports and if used in production, update to
  databases/postgresql80-server as soon as it becomes available. No
  dump/reload will be required when changing from -devel to
  postgresql80-server.

20050117:
  AFFECTS: users of mail/spambnc
  AUTHOR: thierry@FreeBSD.org

The SpamBouncer has been upgraded from version 1.9 to 2.0-RC3, and you
have to modify your ~/.procmailrc files. Please read upgrading.html in
/usr/local/share/doc/spambnc.

20050117:
  AFFECTS: users of cad/astk-client
  AUTHOR: thierry@FreeBSD.org

  ASTK has been moved; if there exists files $HOME/.astkrc/config_serveurs,
  you have to update the entry rep_serv from /usr/local/ASTK/ASTK_SERV/bin
  to /usr/local/aster/ASTK/ASTK_SERV/bin (or you can remove $HOME/.astkrc).

20050114:
  AFFECTS: users of security/libgnomesu, esp. on FreeBSD 4.X.
  AUTHOR: adamw@FreeBSD.org

  If you installed libgnomesu the day it was added to the Ports Tree,
  you have a malformed PAM control file in /etc/pam.d/. All libgnomesu
  users should remove /etc/pam.d/gnomesu-pam, and 5.x users should
  replace it with the version in the updated libgnomesu port (ensure
  that you're using the most current revision of the libgnomesu port).

  4.x users: listen up! The presence of the /etc/pam.d/ directory (and
  anything in that directory) presents a Very Bad Thing. Unless you've
  manually tweaked your PAM settings, you must run:

    # rm /etc/pam.d/gnomesu-pam
    # rmdir /etc/pam.d/

  or all users will be locked out of your system!

20050110:
  AFFECTS: users of irc/iip
  AUTHOR: lioux@FreeBSD.org

  iip has been updated to the new network servers. Therefore, both
  old configuration files and node reference keys no longer apply.

  Therefore, you need to update the configuration files for each
  user running the iip isproxy daemon:

  1) Backup configuration files:

    cp ~/.iip/isproxy.ini ~/.iip/isproxy.ini.backup
    cp ~/.iip/node.ref ~/.iip/node.ref.backup

  2) Remove configuration files:

    rm ~/.iip/isproxy.ini
    rm ~/.iip/node.ref

  3) Create new configuration. Fill information as requested. This
  creates the updated isproxy.ini file:

    isproxy -C

  4) Start iip isproxy. This will initialize your updated node.ref
  file. This file will be automatically updated when you connect
  to the iip network:

    isproxy

20050110:
  AFFECTS: users of sysutils/nautilus-cd-burner
  AUTHOR: gnome@FreeBSD.org

  Nautilus-cd-burner now requires cdrtools built with UTF-8 encoding
  support. The default sysutils/cdrtools port does not support this
  encoding, and that will cause nautilus-cd-burner to enter an infinite
  loop when trying to create CD images. To workaround this, the cdrtools
  dependency was changed in nautilus-cd-burner to point to the
  sysutils/cdrtools-cjk port instead.

  Since sysutils/cdrtools and sysutils/cdrtools-cjk conflict, you must
  uninstall cdrtools so that the nautilus-cd-burner update can properly
  pull in cdrtools-cjk.

20050108:
  AFFECTS: users of mail/courier-imap, mail/sqwebmail
  AUTHOR: oliver@FreeBSD.org

  Courier-imap and sqwebmail are now dependent on courier-authlib. If
  you've changed the default authentication config for courier-imap or
  sqwebmail, you will have to redo the changes for courier-authlib.
  You may wish to deinstall courier-imap and/or sqwebmail before you
  install courier-authlib. Since courier-authlib replaces parts of both
  ports, some of courier-authlib's files are listed as sqwebmail and
  courier-imap files and deinstalling old courier-imap and/or sqwebmail
  port may cause the deinstallation of the freshly installed
  courier-authlib files.

20050108:
  AFFECTS: users of mail/sqwebmail
  AUTHOR: oliver@FreeBSD.org

  Sqwebmail now installs its files directly under PREFIX.  That means for
  instance that files that were formerly found under
  PREFIX/share/sqwebmail/etc/ are now located under PREFIX/etc/sqwebmail.
  Furthermore you need to set sqwebmaild_enable=YES in your rc.conf
  because the rc.d script has been migrated to use the rc.subr subsystem.

20050108:
  AFFECTS: users of mail/courier-imap
  AUTHOR: oliver@FreeBSD.org

  The variable courier_imap_imapdssl_enable have been renamed to
  courier_imap_imapd_ssl_enable.

  The variable courier_imap_pop3dssl_enable have been renamed to
  courier_imap_pop3d_ssl_enable.

  userdb stuff is now located in LOCALBASE/etc/authlib instead of
  LOCALBASE/etc.

20041231:
  AFFECTS: users of www/awstats
  AUTHOR: webmaster@lightningfire.net

  Location of awstats changed from /usr/local/www to /usr/local/www/awstats.
  Please update configuration according instructions in pkg-message.

20041231:
  AFFECTS: users of the Linux compatibility environment
  AUTHOR: netchild@FreeBSD.org

  The default linux_base was changed from v7 to v8.  You need to update
  from v7 to v8 and rebuild every Linux port you have installed.  In order
  to update, run:

    portupgrade -rf -o emulators/linux_base-8 emulators/linux_base

  In case you already use linux_base-8, you have to run:

    portupgrade -rf emulators/linux_base-8

20041229:
  AFFECTS: users of x11/kdebase3, x11-servers/xorg-server
  AUTHOR: lofi@FreeBSD.org

  If KDE does not start anymore after upgrading X.Org to version 6.8.1 (X
  restarts when the KDE splash screen has reached the third icon), please
  check whether the directory /tmp/.ICE-unix exists, is owned by root and
  has permissions 1777 (read/write/access for everybody + sticky bit).

  To make sure everything is in working order, do (as root):

    mkdir -p /tmp/.ICE-unix && chmod 1777 /tmp/.ICE-unix &&
    chown root:wheel /tmp/.ICE-unix

  Also, make sure you do NOT have clear_tmp_enable="YES" set in /etc/rc.conf,
  as it will remove the directory on every reboot and applications will
  recreate it with the wrong ownership.

  Users of daily_clean_tmps_enable in /etc/periodic.conf should make sure
  daily_clean_tmps_ignore contains /tmp/.ICE-unix.

20041227:
  AFFECTS: users of lang/gambas
  AUTHOR: thierry@FreeBSD.org

  As of this update, the passwords of your databases connections are
  encrypted.  If you were using the database manager, please remove
  ~/.gambas/gambas-database-manager.conf before launching the new version.

20041226:
  AFFECTS: users of Horde and the related ports (Turba, IMP, Nag, Kronolith,
       Mnemo, Chora)
  AUTHOR: thierry@FreeBSD.org

  As of this update, the configuration files are getting generated by the
  application, with no support for configuration files used in previous
  versions.

  All data saved in the database, LDAP or MCAL backends will be preserved,
  considering that you run specific scripts to migrate to this new scheme.
  Affected ports are www/horde, mail/turba, deskutils/nag,
  deskutils/kronolith, and deskutils/mnemo.  See the UPGRADING
  documentation of the ports in question for more details.

  The filter system of IMP 3.x has been replaced by a separate application:
  check the port mail/ingo.  Ingo provides a script to migrate the existing
  filter rules from IMP 3.x, see Ingo's documentation.

20041224:
  AFFECTS: users of x11-servers/XFree86-4-Server and graphics/dri
  AUTHOR: lesi@FreeBSD.org

  As of version 4.4.0_6, XFree86-4-Server now depends on
  graphics/xfree86-dri. This is due to incompatibilities between
  XFree86 and the new X.Org 6.8.1 DRI.

  Users of XFree86-4-Server are strongly encouraged to switch to
  the xfree86-dri port as follows:

    portupgrade -fo graphics/xfree86-dri graphics/dri

  which will also fix dependencies.

20041224:
  AFFECTS: users of sysutils/portupgrade and lang/ruby18
  AUTHOR: knu@FreeBSD.org

  Please upgrade sysutils/portupgrade prior to lang/ruby18, or pkgdb(1) may
  coredump with a double free() problem from a misuse (or a "feature") of
  the DL module.

  In that case, you can reinstall sysutils/portupgrade manually.

20041222:
  AFFECTS: users of security/clamav, security/clamav-devel
  AUTHOR: jylefort@brutele.be

  The ClamAV database path has changed from /usr/local/share/clamav to
  /var/db/clamav. You should update the DatabaseDirectory keyword in
  /usr/local/etc/clamd.conf and /usr/local/etc/freshclam.conf.

20041221:
  AFFECTS: users of security/gpgme03
  AUTHOR: clement@FreeBSD.org

  security/gpgme03 port was modified to not to conflict with gpgme 1.x.
  After upgrade, you need to rebuild all ports that depend on it.  You
  should upgrade security/gpgme (if installed) to avoid nasty compile time
  failures, due to original location of gpgme.h.

20041219:
  AFFECTS: users of textproc/jdictionary
  AUTHOR: hq@FreeBSD.org

  The location for JDictionary port installed files has changed. This also
  affects the various plugins. Hence, users should upgrade all jdictionary
  related ports at once to avoid inconsistencies:

    $ portupgrade jdictionary\*

20041214:
  AFFECTS: users of net/freenet6
  AUTHOR: edwin@FreeBSD.org

  The FreeNet6 service must now be enabled/disabled in rc.conf:

    freenet6_enable="YES"

20041213:
  AFFECTS: users of security/cryptplug, deskutils/kdepim3
  AUTHOR: lofi@FreeBSD.org

  The cryptplug port is not compatible with recent versions of gpgme and has
  been changed to depend on gpgme03 (the last version of gpgme is compatible
  with cryptplug).

  Users who have been using cryptplug in order to enable PGP/MIME support in
  KMail should deinstall BOTH cryptplug and gpgme03 before updating KDE to
  version 3.3.2.  Cryptplug is NOT necessary anymore to enable PGP/MIME
  support in KMail, and will cause the kdepim3 build to fail due to
  conflicting dependencies.

20041213:
  AFFECTS: users of databases/postgresql-relay
  AUTHOR: edwin@FreeBSD.org

  The PostgreSQL Relay must now be enabled or disabled explicitly in rc.conf:

    postgresqlrelay_enable="YES"

20041212:
  AFFECTS: users of sysutils/bacula
  AUTHOR: lkoeller@FreeBSD.org

  The port was split into a -server and -client components.  The -server
  part contains the storage and director daemon, the -client part includes
  the console, file daemon, and documentation.

  For migration, delete the bacula port and install the -server and/or
  -client port(s) afterwards.

20041208:
  AFFECTS: users of mail/getmail
  AUTHOR: question+fbsdports@closedsrc.org

  There is a known quirk when using mail/getmail with Python 2.4, where the
  DeprecationWarning is printed regarding the use of the 'strict' keyword
  when a message is being retrieved.

  You can redirect stdout/stderr to /dev/null to quelch the warning.  The
  quirk may be fixed in a future version of getmail.

20041205:
  AFFECTS: users of multimedia/ffmpeg
  AUTHOR: lioux@FreeBSD.org

  multimedia/ffmpeg will not work if previous versions of the port are
  installed.  Also, there is a shared library version bump on this update.
  Therefore:

  1) Remove old ffmpeg:

    pkg_delete -f /var/db/pkg/ffmpeg*

  2) Install updated ffmpeg;

  3) Rebuild all ports that depend on ffmpeg due to the shared
  library version bump:

    cd /var/db/pkg && portupgrade -rf ffmpeg* -x ffmpeg*

20041202:
  AFFECTS: users of any ports which have dependency on lang/python
  AUTHOR: perky@FreeBSD.org

  After upgrading of lang/python, you must rebuild all its consumer ports
  to make them get ready to Python 2.4.

  To do this, you can use these commands:

    pkgdb -uf && cd /usr/ports/lang/python && make upgrade-site-packages

20041128:
  AFFECTS: users of mail/dspam and mail/dspam-devel
  AUTHOR: itetcu@people.tecnik93.com

  When upgrading from previous version, read mail/dspam/files/UPDATING
  and adjust your options.

20041121:
  AFFECTS: users of news/rawdog
  AUTHOR: tim@bishnet.net

  Rawdog 2.x changes the format of the state file used in 1.x.  To upgrade
  from 1.x to 2.x, the rawdog author recommends doing the following:

    cp -R ~/.rawdog ~/.rawdog-old
    rm ~/.rawdog/state
    rawdog -u
    rawdog --upgrade ~/.rawdog-old ~/.rawdog
    rawdog -w

  Once you're happy with the new version, you can remove the remnants:

    rm -r ~/.rawdog-old

20041118:
  AFFECTS: users of sysutils/portupgrade
  AUTHOR: lofi@FreeBSD.org

  portsdb(1) is part of the portupgrade suite and is used to convert a ports
  INDEX file to a binary INDEX.db database. By default, it uses the
  libc-builtin berkeley db to do so, which has a buggy btree implementation.

  If you see errors like "[BUG] Segmentation fault" while a portsdb update is
  in progress, adjust the PORTS_DBDRIVER variable (in your environment or in
  pkgtools.conf) to either bdb1_hash or dbm_hash.

  This problem was fixed in 5.3-RELEASE, but users of 4.10-RELEASE and
  5.2.1-RELEASE (and older releases) will find fixes by updating to the
  latest (at least after Sep 20) of RELENG_4 or RELENG_5.

20041116:
  AFFECTS: users of www/bricolage
  AUTHOR: ports@rbt.ca

  Bricolage may now be run on mod_perl compiled as a DSO for Apache
  when following these guidelines:

  http://perl.apache.org/docs/1.0/guide/install.html#When_DSO_can_be_Used

  To do this, you will need to:

    pkg_delete -f apache-mod_perl
    pkg_delete -f p5-libapreq-static
    portupgrade -rR bricolage

  Bricolage will rebuild mod_perl, apache and libapreq using their standard
  versions.

20041115:
  AFFECTS: users of sysutils/portupgrade
  AUTHOR: lofi@FreeBSD.org

  Due to the recent removal of INDEX and INDEX-5 from FreeBSD's CVS,
  portupgrade with default configuration will run `make index' if started
  after cvsup'ing the ports-collection.  This may take an undesirably long
  time.

  There are several ways to work around this, for example:

  - Run 'make fetchindex' after cvsup'ing ports,

  or:

  - Adjust the PORTS_INDEX variable in your environment or in
    pkgtools.conf (see portupgrade(1) or the default pkgtools.conf) to
    a different value than the default.

  Also remember that 'make index' is only supported on _complete_
  ports-trees. If you are currently refusing whole categories by means
  of a cvsup refuse file, use 'make fetchindex' instead (or consider
  keeping an extra machine/jail with a complete ports-tree around to
  do INDEX builds on).

20041111:
  AFFECTS: users of audio/faad, multimedia/mpeg4ip
  AUTHOR: lioux@FreeBSD.org

  mpeg4ip has been updated and broken down into two separate ports:
  mpeg4ip and mpeg4ip-libmp4v2.  Furthermore, mpeg4ip now depends on faad.
  Moreover, faad now depends on mpeg4ip-libmp4v2 rather than on mpeg4ip,
  which avoids a cyclic dependency (mpeg4ip depends on faad which depends
  on mpeg4ip).

  If any of the old ports are installed, mpeg4ip will not compile.
  Therefore,

  1) Remove old faad and mpeg4ip ports which conflict with new
     mpeg4ip:

    pkg_delete -f /var/db/pkg/mpeg4ip*
    pkg_delete -f /var/db/pkg/faad*

  2) Install faad, mpeg4ip and mpeg4ip-libmp4v2 in the following
     order:

    cd /usr/ports/multimedia/mpeg4ip-libmp4v2 && make install clean
    cd /usr/ports/audio/faad && make install clean
    cd /usr/ports/multimedia/mpeg4ip && make install clean

20041111:
  AFFECTS: users of Java
  AUTHOR: glewis@FreeBSD.org

  javavmwrapper has been rewritten. It now creates symbolic links for all
  executables of the Java VMs that have been registered with it.  These
  symbolic links may impact which version of Java you are using, depending
  on your PATH, which may need to be adjusted.

  For example, if your path is:

    ${LOCALBASE}/bin:${LOCALBASE}/jdk1.4.2/bin

  then previously "java" would resolve to ${LOCALBASE}/jdk1.4.2/bin/java.
  With the new javavmwrapper it will resolve to ${LOCALBASE}/bin/java.
  Depending upon the Java VMs that are registered and various environment
  variables, it may or may not be ${LOCALBASE}/jdk1.4.2/bin/java that is
  run by javavmwrapper via the symbolic link ${LOCALBASE}/bin/java.

20041107:
  AFFECTS: users of x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  To use GMail in konqueror, you need to set the browser identification for
  gmail.google.com to 'Safari 1.2.3 on Mac OS X', otherwise you will not be
  able to click on any links in GMail after logging in.

  You can set site-specific browser identifications via the Settings menu
  in Konqueror (Configure Konqueror/Browser Identification) or in the KDE
  Control Center, Internet & Network/Web Browser/Browser Identification.

20041107:
  AFFECTS: all users who have any GNOME libraries installed
  AUTHOR: adamw@FreeBSD.org and the rest of the FreeBSD/GNOME crew

  Hey, 2.6! You don't have to be 2.6 anymore!
  Do NOT use portupgrade(1) to update your GNOME 2.6 desktop to 2.8:
  it won't work, and you'll have to recompile bunches of ports by hand
  as a result. Use the gnome_upgrade.sh script to automate the upgrade
  process. The script is available from
    http://www.FreeBSD.org/gnome/gnome_upgrade.sh

20041104:
  AFFECTS: users of security/clamav-devel
  AUTHOR: rob@debank.tv

  The configuration file was renamed from clamav.conf to clamd.conf,
  make sure to move your configuration before restarting the server.

20041104:
  AFFECTS: users of japanese/rskkserv
  AUTHOR: rushani@FreeBSD.org

  The format of PREFIX/etc/rskkserv.conf has changed in version 2.95.
  Please update your configuration file before restarting the server
  using PREFIX/share/examples/rskkserv/conf-o2n.rb and referring to
  PREFIX/share/examples/rskkserv/rskkserv.conf.sample.

20041031:
  AFFECTS: users of databases/mysql40-server
  AUTHOR: ale@FreeBSD.org

  The MySQL daemon must now be enabled/disabled in rc.conf.  See the
  script for details.

20041028:
  AFFECTS: users of net/netatalk
  AUTHOR: marcus@FreeBSD.org

  Please note that the handling of the default type/creator has changed with
  2.0.1. As a side effect, users upgrading from earlier versions, including
  2.0.0, will have to remove the default type/creator from the
  AppleVolumes.System file. The install process will not modify this file
  automatically. Please remove the line starting with '.         "????"'
  manually.

  This text was taken from the Netatalk 2.0.1 release notes at
  https://sourceforge.net/project/shownotes.php?release_id=278320.

20041027:
  AFFECTS: users of games/pcgen
  AUTHOR: hq@FreeBSD.org

  The launcher script for PCGen has been renamed to 'pcgen' (formerly
  'pcgen.sh').

20041024:
  AFFECTS: users of databases/mysql50-server
  AUTHOR: ale@FreeBSD.org

  The MySQL daemon must now be enabled/disabled in rc.conf.  See the
  script for details.

20041024:
  AFFECTS: users of mail/popfile
  AUTHOR: matusita@FreeBSD.org

  Since there is a known problem that popfile doesn't work with DBD::SQLite
  1.x at this time, you'll be in trouble after upgrading
  databases/p5-DBD-SQLite to the latest one.  A workaround is committed to
  0.22.0_1 which uses databases/p5-DBD-SQLite2 by default.  However, if you
  already have popfile installed, please check ${HOME}/.popfile/popfile.cfg,
  and change the line "bayes_dbconnect dbi:SQLite:dbname=$dbname" to
  "bayes_dbconnect dbi:SQLite2:dbname=$dbname".  Then restart popfile.

20041023:
  AFFECTS: users of mail/dbmail
  AUTHOR: seanc@FreeBSD.org

  When upgrading from 1.X to 2.X, read the upgrading instructions.  The
  structure of the database has changed, please use the migration scripts
  provided.  Many of the programs have been renamed and arguments have been
  changed as well.

20041020:
  AFFECTS: users of security/antivir-milter
  AUTHOR: marius@FreeBSD.org

  When updating from previous versions of security/antivir-milter to
  antivir-milter-1.1 and you had changed PREFIX/etc/avmilter.conf you
  have to bring over your changes to PREFIX/etc/avmilter/avmilter.conf
  after installing the new version of this port. Note, however, that
  some variables have been renamed.
  If you used AntiVir Milter ignore, scan and/or warn files in /etc
  you can now move them to PREFIX/etc/avmilter.

20041019:
  AFFECTS: users of databases/mysql41-server
  AUTHOR: ale@FreeBSD.org

  The MySQL daemon must now be enabled/disabled in rc.conf.  See the
  script for details.

20041018:
  AFFECTS: users of mail/courier-imap
  AUTHOR: oliver@FreeBSD.org

  The courier-imap port must now be enabled/disabled in rc.conf.  See the
  script for details.

20041015:
  AFFECTS: users of www/apache2 with devel/apr
  AUTHOR: clement@FreeBSD.org

  WITH_APR_FROM_PORTS knob is no longer supported, since apr > 1.0
  doesn't conflict with apache2's one. If you use apr 0.9.x you
  won't be able to upgrade apache2 anymore.

20041014:
  AFFECTS: users of security/clamav
  AUTHOR: eik@FreeBSD.org

  The configuration file for the clamd daemon has changed from
  /usr/local/etc/clamav.conf to /usr/local/etc/clamd.conf.

20041013:
  AFFECTS: users of mail/getmail
  AUTHOR: question+fbsdports@closedsrc.org

  If you are using a version of mail/getmail earlier than 4.x and
  are planning to upgrade to 4.2.2, please note that the configuration file
  syntax has changed and the existing configuration file(s) will not work.
  Please refer to the online documentation available here:

    http://www.qcc.ca/~charlesc/software/getmail-4/documentation.html

  If you already upgraded to the latest version of getmail, you can refer
  to the installed documentation under:

    ${PREFIX}/share/docs/getmail

  The 4.x branch of getmail also requires Python 2.3.3 or newer.

  Some mail delivery agents require that the unixfrom parameter to be set
  to either "true" or "false" in the configuration file.

  A "quick and dirty" guide on setting up, configuring and using getmail is
  available at http://www.qnd-guides.org/qnd-getmail.html.

20041012:
  AFFECTS: users of devel/perforce
  AUTHOR: marshall@chezmarshall.com

  Upgrading from 2003.2 to 2004.2 is straightforward, it is highly
  recommended to checkpoint and backup your server as follows:

    p4 verify //...
    p4 verify -u //... # possibly redundant
    p4 admin checkpoint
    p4 admin stop
    <backup repository>

  If you are upgrading from a version earlier than 2003.2, you should
  consult the Perforce documentation before proceeding:

    http://www.perforce.com/perforce/technical.html

  Also, it looks as though Perforce has stopped updating the man pages,
  so they are no longer included with the port.

20041012:
  AFFECTS: users of www/firefox
  AUTHOR: freebsd-gnome@FreeBSD.org

  After upgrading to firefox-1.0.1.p, certain things such as extension/theme
  [de]installation, and "Find On Page" may no longer work. You may also
  notice an infinite loop when starting Firefox. If this happens, backup
  ~/.mozilla/firefox/*/bookmarks.html, and remove ~/.mozilla/firefox.
  Afterward, Firefox should start up. You can then restore the bookmarks.html
  file to the new ~/.mozilla/firefox/*.default directory.

20041012:
  AFFECTS: users of net/netatalk
  AUTHOR: marcus@FreeBSD.org

  Netatalk has been upgraded to 2.0.0. There are some important
  instructions for upgrading from 1.6.x. Please see
  http://netatalk.sourceforge.net/2.0/htmldocs/upgrade.html on how
  to make the transition.

20041011:
  AFFECTS: users of www/linuxpluginwrapper who are running FreeBSD
       5.3-BETA7 or later (including -CURRENT)
  AUTHOR: nork@FreeBSD.org

  According to UPDATING(20041001), /etc/libmap.conf should be fixed
  libm.so.2 to libm.so.3.

20041001:
  AFFECTS: users of ports that require several base system libraries who
       are running FreeBSD 5.3-BETA7 or later (including -CURRENT)
  AUTHOR: kensmith@FreeBSD.org

  As part of the FreeBSD-5.3 release the following system libraries
  had their version number incremented:

    /lib/libm.so.2 -> libm.so.3
    /lib/libreadline.so.4 -> libreadline.so.5
    /usr/lib/libhistory.so.4 -> libhistory.so.5
    /usr/lib/libopie.so.2 -> libopie.so.3
    /usr/lib/libpcap.so.2 -> libpcap.so.3

  This should have no effect unless you are using FreeBSD 5.3-BETA7 or
  higher, or if you are a -CURRENT user who upgraded after this date.
  Assuming you did a from-source upgrade new versions of these libraries
  will be created but the old versions will be left behind (for example
  /lib/libm.so.2 will be the old one, /lib/libm.so.3 will be the new one).
  Any ports or pre-built packages you have currently installed will
  continue to use the old library, any ports you install after the upgrade
  will begin to use the new library. You will need to have all your
  ports recompiled before the old library goes away. To help with the
  migration you could also use /etc/libmap.conf to map libm.so.2 to
  libm.so.3.

20040903:
  AFFECTS: users of net/kdenetwork3
  AUTHOR: kde@FreeBSD.org

  The lanbrowsing facility of KDE has been removed from the main
  kdenetwork3 port and is now available via the net/lanbrowsing
  port.

20040901:
  AFFECTS: users of www/squid
  AUTHOR: tmseck@netcologne.de

  www/squid now installs an rcNG script by default.  This means you need to
  explicitly enable squid by setting `squid_enable=yes' in /etc/rc.conf.

  The squid.sh script uses the following variables:

    squid_chdir
    squid_flags
    squid_user

  Please see the squid.sh script for further details.  If you want to
  install an old style rc-script, build the port with
  "WITHOUT_SQUID_RCNG=YES" or by rerunning "make config" and disabling this
  option.

20040830:
  AFFECTS: users of x11/kde3, x11/kdelibs3, x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  In KDE 3.3, a number of files were moved between ports and some ports
  were removed.  This means that you will have to take some precautions
  to update your KDE installation.  A simple portupgrade -a will not work;
  portupgrade -R kde can fail as well, depending on what parts of KDE you
  have currently installed.  We therefore recommend sticking to the
  following procedure.  The procedure requires you to have
  `sysutils/portupgrade' installed and you to be the superuser (or using
  sudo).  We recommend not being logged in to a KDE session on the machine
  you're performing the upgrade on.  If you choose to perform the update
  while being logged in to KDE, expect erratic behavior and crashes from
  applications launched during the update.

  1) First, make sure your ports index is up to date:

    cd /usr/ports && make index

      or, if you're using the sysutils/portindex port:

    portindex

  2) Delete installed packages which conflict with the updated KDE
      ports:

    pkg_deinstall -f kdeaddons-kontact-plugins-\* \
    kdeaddons-kaddressbook-plugins-\* kdepim-\* kdeutils-\* \
    kdeaddons-\[0-9\]\* kde-\[0-9\]\*

      kdegraphics now conflicts with the kolourpaint package and kdeedu now
      conflicts with the kwordquiz package.  If you have kwordquiz and/or
      kolourpaint installed on your system and you want to use the
      kdegraphics/kdeedu ports, you should first deinstall the conflicting
      packages:

    pkg_deinstall -f kolourpaint\* kwordquiz\*

  3) Now update the remaining KDE ports:

    portupgrade arts\* kde\* quanta\*

      or, if you want to update KDE along with other updated ports:

    portupgrade -a

      Note that the quanta port has been renamed to kdewebdev. The commands
      above will automatically replace quanta with kdewebdev, if you have
      quanta installed.

  4) Reinstall any KDE ports you deleted in step 2. Note that the kdeaddons-
      kontact-plugins (net/kontact-plugins), kdepim-kpilot (palm/kpilot) and
      quanta (www/quanta) ports/packages do not exist anymore and cannot be
      reinstalled.

  Known post-updating issues:

  - If you're missing acoustic notifications (system sounds) after the update:

        rm ~/.kde/share/config/knotifyrc

    Then log out of KDE and back in again.

  - KMail has been heavily modified since KDE 3.2.x. Testing shows that KMail
    can display erratic behavior and crashes after the update. If you see any
    such behavior, it is recommended to simply close KMail and start it again
    until it resumes normal operation.

    The integration of GnuPG and KMail for signing, encrypting and verifying
    PGP/MIME mail has also changed. A quick howto is available at
    http://freebsd.kde.org/howtos/gnupg-kmail.php.

  - kdm users might get warnings from kdm about obsolete lines in kdmrc.
    You can migrate your configuration while preserving your customizations
    by running

    genkdmconf

    Make sure to backup your old kdmrc (usually found in
    /usr/local/share/config/kdm) beforehand in case the merge produces an
    invalid configuration.

  - Extensive information about changes from KDE 3.2.x can be found at
    http://www.kde.org/announcements/changelogs/changelog3_2_3to3_3.php

20040829:
  AFFECTS: users of mail/mutt-devel
  AUTHOR: udo.schweigert@siemens.com

  The defaults of the port have been changed from WITH_MUTT_NCURSES to
  WITH_MUTT_SLANG to be in sync with the mail/mutt port.  If you really have
  problems with slang (which should be a very rare case) be sure to have set
  COLORTERM=yes and COLORFGBG="color1;color2" in your environment, or
  recompile the port with the WITH_MUTT_NCURSES knob set (e.g. by adding
  WITH_MUTT_NCURSES=yes to your /etc/make.conf).

20040828:
  AFFECTS: users of security/samba-vscan
  AUTHOR: jmelo@freebsdbrasil.com.br

  The default location of the configuration files has been changed from
  /etc/ to /usr/local/etc/ and from /etc/samba to
  /usr/local/etc/samba-vscan/; the default location of the data files has
  been changed from /var/run/clamd to /var/run/clamav/clamd and from
  /var/opt/f-secure/fsav/databases to /var/db/fsav/databases.

20040820:
  AFFECTS: users of japanese/ptex-tetex, japanese/xdvik, and japanese/dvipsk
  AUTHOR: hrs@FreeBSD.org

  japanese/ptex-tetex, japanese/xdvik, and japanese/dvipsk now look for the
  texmf.cnf file in $TEXMF/web2c-ptex/texmf.cnf first, while some utilities
  included in the original teTeX distribution such as kpsepath(1) look for
  the file in $TEXMF/web2c/texmf.cnf first.  This is for separating the
  pTeX's texmf.cnf and the original TeX's texmf.cnf, and you do not have to
  copy or link the file $TEXMF/web2c-ptex/texmf.cnf to $TEXMF/web2c/.  To
  lookup pTeX path by using kpsepath(1) and so on, please set TEXMFCNF
  environment variable as described in $TEXMF/web2c-ptex/texmf.cnf.  For
  more detail, see $TEXMF/web2c-ptex/texmf.cnf and $TEXMF/web2c/texmf.cnf.

20040820:
  AFFECTS: users of japanese/platex209-*
  AUTHOR: hrs@FreeBSD.org

  japanese/platex209-* are renamed to japanese/platex209 and now depend on
  japanese/ptex-tetex.  While EUC-JP and JIS encoding can be used by default,
  but Shift JIS is no longer supported because it makes very difficult to
  maintain other pTeX related ports.  However, "ptex --kanji=sjis" command
  still works, so it can be used if all of macro files under share/texmf are
  converted to Shift JIS encoding manually.

20040820:
  AFFECTS: users of japanese/dvipsk-vflib
  AUTHOR: hrs@FreeBSD.org

  japanese/dvipsk-vflib has been removed because it is not maintained for
  a long time.  While japanese/dvipsk itself has no support to rendering
  vector fonts, this and Ghostscript give almost the same functionality.

20040820:
  AFFECTS: users of japanese/xdvik-vflib
  AUTHOR: hrs@FreeBSD.org

  japanese/xdvik-vflib has been renamed to japanese/xdvik because it has
  nothing to do with VFLib now.  It depends on and uses FreeType2 to render
  vector fonts.

20040817:
  AFFECTS: users of www/apache2
  AUTHOR: clement@FreeBSD.org

  Summary of recent changes:

  - Access to filesystem is denied by default
  - mod_proxy* are no longer built by default
  - Now ${PREFIX}/etc/apache2/Includes/*.conf can be used to store
    local configuration or sample configurations
  - Makefile.modules.3rd contains modules selection for apache 2.x and 1.3.x

20040815:
  AFFECTS: users of net/openldap22{,-sasl}-server
  AUTHOR: eik@FreeBSD.org

  The start/stop script has moved to ${PREFIX}/etc/rc.d. Users on 5.X
  who want to start the daemon early can set WITH_RCORDER=yes.

  Setting WITH_ODBC_TYPE is not sufficient to enable SQL backend support,
  WITH_ODBC=yes is also required.

20040813:
  AFFECTS: users of x11/kdebase3 (kdm)
  AUTHOR: kde@FreeBSD.org

  If you are unable to login to X via kdm after portupgrading to the latest
  kdebase port and you're getting these or similar messages on the console

  /kernel: Aug 13 17:12:10 kiste kdm: :0[447]: Can't execute
  "/usr/local/share/config/kdm/Xstartup": No such file or directory
  /kernel: Aug 13 17:12:10 kiste kdm: :0[432]: Cannot execute startup script
  "/usr/local/share/config/kdm/Xstartup"
  /kernel: Aug 13 17:12:10 kiste kdm: :0[448]: Can't execute
  "/usr/local/share/config/kdm/Xreset": No such file or directory
  /kernel: Aug 13 17:12:12 kiste kdm: :0[458]: Can't execute
  "/usr/local/share/config/kdm/Xsetup": No such file or directory

  please do the following:

  1.) Copy /usr/local/share/config/kdm/kdmrc away to a safe place, for example
  your home directory (cp /usr/local/share/config/kdm/kdmrc ~/)

  2.) Run, as root: genkdmconf --no-old

  3.) Put your copy of kdmrc back to /usr/local/share/config/kdm/kdmrc (cp
  ~/kdmrc /usr/local/share/config/kdm/)

  Optional step 4.) Run, as root: genkdmconf (without any options) to update
  your kdmrc to the latest configuration file format

  Note for advanced users: Substitute /usr/local with your custom PREFIX if
  you're using one.

20040730:
  AFFECTS: users of lang/perl5.8
  AUTHOR: tobez@FreeBSD.org, mat@FreeBSD.org, marcus@FreeBSD.org

  lang/perl5.8 has been updated to 5.8.5. You should update everything
  depending on perl, that is:

    * first, upgrade your perl5.8 installation.
    * run "use.perl port", so that the system knows you have 5.8.5.
    * now, run some magic incantations to upgrade all ports depending on perl,
      that is run something like:
      portupgrade -f `(pkg_info -R perl-5.8.5 | tail +4; \
    find /usr/local/lib/perl5/site_perl/5.8.[124] -type f -print0 \
    | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //') | sort -u`
      This is likely to fail for a few ports, you'll have to upgrade them
      afterwards.
      Please note, that this last step is, strictly speaking, not necessary,
      if you are upgrading from 5.8.4. But it is cleaner to do so anyway.

20040726:
  AFFECTS: users of devel/apache-ant
  AUTHOR: glewis@FreeBSD.org

  The update to Ant 1.6.2 introduces the following changes which may break
  older environments, according to the 1.6.2 release notes:

  . The import task used the canonical version of a file path. This
    has been changed to use the absolute path. Bugzilla 28505.
  . ant-xalan2.jar has been removed since the only class contained
    in it didn't depend on Xalan-J 2 at all. Its sole dependency has
    always been TraX and so it has been merged into ant-trax.jar.
  . All exceptions thrown by tasks are now wrapped in a buildexception
    giving the location in the buildfile of the task.
  . Nested elements for namespaced tasks and types may belong to
    the Ant default namespace as well as the task's or type's namespace.
  . <junitreport> will very likely no longer work with Xalan-J 1.

20040724:
  AFFECTS: users of X.Org and GNOME
  AUTHOR: gnome@FreeBSD.org

  After migrating from XFree86 to X.Org, you must rebuild
  x11-toolkits/libwnck and x11/libxklavier for full GNOME functionality
  to be restored.

  If you receive an XKB initialization error when starting GNOME, edit
  your XF86Config or xorg.conf, and remove the line:

    Option "XkbRules" "xfree86"

20040723:
  AFFECTS: users of FreeBSD-CURRENT, users of X.Org
  AUTHOR: anholt@FreeBSD.org

  The XFREE86_VERSION variable is deprecated and has been replaced by the
  X_WINDOW_SYSTEM variable.  X_WINDOW_SYSTEM may be set to xorg, xfree86-4,
  or xfree86-3.  X_WINDOW_SYSTEM defaults to xorg on FreeBSD-CURRENT.  If
  you are switching to xorg, you should follow this set of commands to
  cleanly upgrade:

    pkg_delete -f /var/db/pkg/imake-4* /var/db/pkg/XFree86-*
    cd /usr/ports/x11/xorg && make install
    pkgdb -F

  Users of -stable or older -CURRENT can switch to X.Org by setting
  X_WINDOW_SYSTEM=xorg in make.conf and following the same process.

  Alternately, FreeBSD 5.X and later users can use portupgrade with packages:

    cd /var/db/pkg
    portupgrade -o devel/imake-6 imake-4*
    portupgrade -o x11/xorg-libraries XFree86-libraries
    portupgrade -o x11/xorg-clients XFree86-clients
    portupgrade -o x11/xorg-manpages XFree86-manuals
    portupgrade -o x11/xorg-documents XFree86-documents
    portupgrade -o x11-fonts/xorg-fonts-truetype XFree86-fontScalable
    portupgrade -o x11-fonts/xorg-fonts-100dpi XFree86-font100dpi
    portupgrade -o x11-fonts/xorg-fonts-75dpi XFree86-font75dpi
    portupgrade -o x11-fonts/xorg-fonts-miscbitmaps XFree86-fontDefaultBitmaps
    portupgrade -o x11-fonts/xorg-fonts-cyrillic XFree86-fontCyrillic
    portupgrade -o x11-fonts/xorg-fonts-encodings XFree86-fontEncodings
    portupgrade -o x11-servers/xorg-server XFree86-Server
    portupgrade -o x11/xorg -f XFree86

20040719:
  AFFECTS: users of PHP
  AUTHOR: ale@FreeBSD.org

  The old lang/php4 and lang/php5 ports have been split into 'base' PHP,
  PEAR, and shared extensions to allow more flexibility and add new features.
  Upgrading your current PHP installation will result in a 'base' PHP
  installation (no PEAR and no extensions).

  PEAR can be found in the new devel/php4-pear and devel/php5-pear ports,
  while the set of PHP extensions to install can be chosen via the meta-ports
  lang/php4-extensions and lang/php5-extensions, or installing singular
  extensions individually.

  If you have a previous php.ini configuration file, be sure to comment out
  the extension_dir parameter, since the correct path is statically compiled
  into the PHP binary.

  For an overview of the modules used with the old PHP binary, use the
  command "php -m".

20040717:
  AFFECTS: users of net/openldap21{,-sasl}-client
  AUTHOR: eik@FreeBSD.org

  OpenLDAP version 2.2 is now the default. To upgrade all ports please do:

    portupgrade -rfo net/openldap22-client openldap-client

  (or a similar command for the SASL variant).  If you do not want to
  upgrade, add the line `WANT_OPENLDAP_VER?=21' to /etc/make.conf.

  Note that when you want to upgrade openldap21{,sasl}-server, you have to
  use slapcat/slapadd to migrate the database, since the internal format
  is not binary compatible.  Simply upgrading the server without doing a
  slapcat first can corrupt your database.

20040717:
  AFFECTS: users of mail/exim on FreeBSD 5.X
  AUTHOR: eik@FreeBSD.org

  The default location of the startup script has been changed to
  ${PREFIX}/etc/rc.d.  When you depend on the previous behavior, build the
  port with WITH_RCORDER=yes.

  Setting WITH_OPENLDAP_VER and WITH_MYSQL_VER do not automatically imply
  the corresponding WITH_ variable.  The use of these options is
  discouraged, use the global settings (WANT_OPENLDAP_VER and
  DEFAULT_MYSQL_VER) to set system wide defaults instead.

20040709:
  AFFECTS: users of mail/milter-sender
  AUTHOR: vs@FreeBSD.org

  Milter-sender version 0.58 released.  When updating to version 0.58,
  beware if you have a personalized configuration file (milter-sender.cf).
  The meaning of the MxAcceptsAllAction variable has changed and its
  default has changed from 4 to 6.  If this variable is not updated,
  greylisting might be more aggressive than expected.

20040708:
  AFFECTS: users of www/opera
  AUTHOR: osa@FreeBSD.org

  Opera version 7.52 is released.

  The file search.ini has been changed to ensure correct default addresses
  for dictionary and encyclopedia searches.  Existing versions will be
  overwritten on upgrade.  Users who have a customized search.ini file that
  they would like to keep, should edit its version number to 4 before
  upgrading.  Note that you have to edit the search.ini file located in the
  ~/.opera folder.

    [Version]
    File Version=4

  Other changes you are may find in changelog, it is available at
  http://www.opera.com/freebsd/changelogs/752/.

20040706:
  AFFECTS: users of Python bindings for textproc/lib{xml2,xslt} libraries
  AUTHOR: gnome@FreeBSD.org

  Python bindings for libxml2 and libxslt libraries were moved out into
  separate slave ports. Please install textproc/py-libxml2 and
  textproc/py-libxslt to get bindings back to your system.

20040703:
  AFFECTS: users of net/netatalk-devel
  AUTHOR: marcus@FreeBSD.org

  Netatalk-devel has been converted to use RCng.  That means all of the
  netatalk daemons must be enabled in /etc/rc.conf before they will start
  (previously, all netatalk daemons would start by default).  The following
  variables are used by the new netatalk.sh script:

    atalkd_enable
    cnid_metad_enable
    papd_enable
    afpd_enable
    timelord_enable

  See the netatalk.sh script for more details.

20040701:
  AFFECTS: users of security/portaudit
  AUTHOR: eik@FreeBSD.org

  The preference file format, as well as the periodic(8) names have changed.
  If you use the default settings, no modifications are necessary.

  New settings in /usr/local/etc/portaudit.conf:

    portaudit_fetch_env="HTTP_PROXY="
    portaudit_fetch_cmd="fetch -1amp"
    portaudit_sites="http://www.FreeBSD.org/ports/"

  New settings in periodic.conf(5):

    daily_status_security_portaudit_enable="YES"
    daily_status_security_portaudit_expiry="2"
    daily_status_security_portaudit_user="nobody"

20040629:
  AFFECTS: users of audio/daapd
  AUTHOR: lth@FreeBSD.org

  Daapd must now be enabled in rc.conf. Add this to your /etc/rc.conf:
  daapd_enable="YES"

20040626:
  AFFECTS: users of lang/php4 and lang/php5 with the PDFlib extension
  AUTHOR: ale@FreeBSD.org

  The PDFlib extension has been removed from the archive and moved to PECL.
  Consequently to enable it you have to install print/pecl-pdflib.
  Alternatively you may want to try the experimental print/pecl-panda.

20040625:
  AFFECTS: users of ftp/pure-ftpd
  AUTHOR: pav@FreeBSD.org

  Pure-ftpd must be enabled in rc.conf now. Add this to your /etc/rc.conf:
  pureftpd_enable="YES"

20040622:
  AFFECTS: users of net/openslp
  AUTHOR: kuriyama@FreeBSD.org

  The openslp port must now be enabled/disabled and configured in rc.conf.
  See the script for details.

20040619:
  AFFECTS: users of sysutils/webmin and sysutils/usermin
  AUTHOR: olgeni@FreeBSD.org

  The webmin and usermin ports must now be enabled in rc.conf.  See the
  pkg-message or script for details.

20040618:
  AFFECTS: users of japanese/ptex-tetex
  AUTHOR: hrs@FreeBSD.org

  The texmf.cnf file for pTeX is now installed in texmf/web2c-ptex.

20040618:
  AFFECTS: users of japanese/ptex-pkfonts*
  AUTHOR: hrs@FreeBSD.org

  The japanese/ptex-pkfonts* has been removed because pkfonts are already
  included in the teTeX distribution.

20040618:
  AFFECTS: users of japanese/xdvik-vflib*
  AUTHOR: hrs@FreeBSD.org

  The japanese/xdvik-vflib no longer supports VFlib2, and now depends on
  print/freetype2. For the configuration details, see vfontmap file which
  installed as texmf/xdvi/vfontmap. japanese/kochi-ttfonts is used for
  min and goth by default.

  xdvik-vflib-pk* variants has been removed because pkfonts are already
  included in the teTeX distribution.

20040618:
  AFFECTS: users of print/teTeX
  AUTHOR: hrs@FreeBSD.org

  The print/teTeX has been split into print/teTeX-base and print/teTeX-texmf,
  and print/teTeX is now a meta-port for the two and print/dvipsk-tetex and
  print/xdvik. print/teTeX installs dvips and xdvi by default again (via
  print/dvipsk-tetex and print/xdvik). For people who want to use teTeX,
  simply install print/teTeX with options set by default.

  print/teTeX-base has additional options for adding xdvi and dvips included
  in the teTeX distribution itself, but use of them are not recommended if
  you do not understand what you are trying to do. Especially, when the
  options are set by yourself, do not install ports that match *xdvi* and
  *dvips* because they break the installed print/teTeX-base's dviware
  and such conflicts will not be detected. In most cases, a combination
  of print/teTeX-base + print/dvipsk-tetex + print/xdvik (which are
  installed by print/teTeX by default) will be sufficient.

20040615:
  AFFECTS: users of www/firefox
  AUTHOR: gnome@FreeBSD.org

  The firefox-0.9 update has a special requirement before you can run it.
  You must first run firefox as root before running it as another user.
  The best way to do this is to su - to root or log in as root (i.e. do
  not do `su -m' to become root).  After becoming root, simply run
  ``firefox''.  You can then quit the browser, then run it as any other
  user.  If you do not run firefox as root first, the browser window will
  not appear.

20040608:
  AFFECTS: users of net/haproxy
  AUTHOR: clement@FreeBSD.org

  The haproxy port must now be enabled/disabled and configured in rc.conf.
  See the pkg-message or script for details.

20040605:
  AFFECTS: users of www/apache2
  AUTHOR: clement@FreeBSD.org

  The apache2 port must now be enabled/disabled and configured in rc.conf.
  See the pkg-message or script for details.

20040602:
  AFFECTS: users of sysutils/mkisofs and sysutils/mkisofs-devel
  AUTHOR: netchild@FreeBSD.org, marius@FreeBSD.org

  sysutils/mkisofs and sysutils/mkisofs-devel were merged into
  sysutils/cdrtools and sysutils/cdrtools-devel respectively.

  To update them generate ("make index") or fetch ("make fetchindex") a
  new INDEX/INDEX-5. Run "pkgdb -F" and unregister the mkisofs/-devel
  port. Then forcefully update the cdrtools port and all of its
  dependencies (e.g. "portupgrade -rf cdrtools"). After the update
  it may be necessary to rerun "pkgdb -F" and resolve a stale
  dependency to cdrtools.

20040531:
  AFFECTS: users of lang/perl5.8
  AUTHOR: mat@FreeBSD.org, marcus@FreeBSD.org

  lang/perl5.8 has been updated to 5.8.4. you should update everything
  depending on perl, that is:

    * first, upgrade your perl5.8 installation.
    * run "use.perl port", so that the system knows you have 5.8.4.
    * now, run some magic incantations to upgrade all ports depending on perl,
      that is run something like:
      portupgrade -f `(pkg_info -R perl-5.8.4 | tail +4; \
    find /usr/local/lib/perl5/site_perl/5.8.2 -type f -print0 \
    | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //') | sort -u`
      This is likely to fail for a few ports, you'll have to upgrade them
      afterwards.

20040529:
  AFFECTS: users of mail/mailman and japanese/mailman
  AUTHOR: nork@FreeBSD.org

  In Mailman 2.1.5, some significant changes have been made to the
  file formats for qfiles and the pendings database. See
  $PREFIX/share/doc/mailman/UPGRADING for details (if you defined
  NOPORTDOCS, refer to relevant file in the archive).

20040527:
  AFFECTS: users of net/openldap22-client
  AUTHOR: eik@FreeBSD.org

  The OpenLDAP library soname has changed, requiring a recompilation
  of all dependent ports:

    portupgrade -rf net/openldap22-client

20040525:
  AFFECTS: users of databases/postgresql-client
  AUTHOR: mat@FreeBSD.org

  This port was removed because of dependencies problem.  If you still want
  to have it, install databases/postgresql7 with -DWITHOUT_SERVER.

20040521:
  AFFECTS: users of irc/ircd-hybrid-ru
  AUTHOR: krion@FreeBSD.org

  UID/GID were changed from 6667 to 555, please manually delete
  old entries from /etc/passwd, /etc/master.passwd, and /etc/group.

20040514:
  AFFECTS: users of audio/faad
  AUTHOR: pav@FreeBSD.org

  If the compilation of faad fails, please manually delete previously
  installed version of faad and reinstall it from the port.

20040512:
  AFFECTS: users of print/teTeX
  AUTHOR: hrs@FreeBSD.org

  The print/teTeX no longer installs dvipsk by default. To build and
  install dvipsk, you have to specify WITH_DVIPSK, or the dvipsk utility
  in the print/teTeX is also available print/dvipsk-tetex separately.
  This change is to resolve conflicts between various versions of dvips.

20040504:
  AFFECTS: users of mail/drac
  AUTHOR: nork@FreeBSD.org

  The "drac_flags" rc.conf(5) variable has been renamed to "dracd_flags".
  See the pkg-message or script for details.

20040501:
  AFFECTS: users of www/apache13
  AUTHOR: nork@FreeBSD.org

  The apache13 port must now be enabled/disabled and configured in rc.conf.
  See the pkg-message or script for details.

20040429:
  AFFECTS: users of sysutils/smartmontools
  AUTHOR: nork@FreeBSD.org

  The smartmontools port must now be enabled/disabled and configured in
  rc.conf. See the pkg-message or script for details.

20040420:
  AFFECTS: users of sysutils/cdrtools
  AUTHOR: netchild@FreeBSD.org

  The cdrecord program now uses ${PREFIX}/etc (e.g. /usr/local/etc) instead
  of /etc/default as the location of the global configuration file. If you
  created such a configuration file you need to copy it over to the new
  location.

20040420:
  AFFECTS: users of x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  If you update KDE from version 3.2.1 or earlier to version 3.2.2 while
  running a KDE session, newly opened instances of Konqueror might hang
  or crash, depending on how far the update has progressed.

  If this happens, it is necessary to restart your KDE session in order to
  restore proper operations.

20040404:
  AFFECTS: GNOME desktop users
  AUTHOR: gnome@FreeBSD.org

  GNOME has been updated to 2.6. Simply portupgrading will cause serious
  problems if you are using the desktop itself. If you are a GNOME desktop
  user, you should carefully read the instructions at:

    http://www.freebsd.org/gnome/docs/faq26.html

  And use the gnome_upgrade.sh script to properly upgrade to GNOME 2.6. If
  you are just a casual user of some of the GNOME libraries, portupgrade
  should be sufficient to update your ports.

20040316:
  AFFECTS: users of net/isc-dhcp3-*
  AUTHOR: des@FreeBSD.org

  The isc-dhcp3-* ports must now be enabled/disabled and configured in
  rc.conf. See the pkg-message for details.

20040313:
  AFFECTS: users of textproc/expat2
  AUTHOR: marcus@FreeBSD.org

  Users of expat2 (and its many dependencies) should do the following to
  properly update expat2 and all of its dependencies:

    portupgrade -rf textproc/expat2

20040311:
  AFFECTS: users of databases/postgresql7
  AUTHOR: osa@FreeBSD.org

  PostgreSQL 7.4.2 released and release notes available at:

    http://www.postgresql.org/news/173.html

  NOTICE: unlike most minor versions, this version does require some
  updates to the pg_* system tables. Full instructions for how to do
  this are included in the full HISTORY file.

    *** DO NOT UPGRADE WITHOUT READING THESE INSTRUCTIONS ***

20040309:
  AFFECTS: users of x11/kdelibs3 and x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  If you update kdelibs from version 3.2.0 to version 3.2.1 while running
  a KDE 3.2.0 session, newly opened instances of Konqueror will silently
  crash as soon as the new version of kdelibs has been installed, due to
  mismatching linker symbols.

  It is recommended you quit your KDE session at that point and update
  kdebase to version 3.2.1, then restart KDE.

20040309:
  AFFECTS: users of audio/arts and x11/kdebase3
  AUTHOR: kde@FreeBSD.org

  The arts port, PORTVERSION 1.2.1 does not include artswrapper anymore.
  Instead, artswrapper is now installed by a new port audio/artswrapper.

  Installation of artswrapper is optional, however:

  If you presently run KDE and you have "Run with the highest possible
  priority (realtime priority)" checked in Control Center/Sound & Multimedia/
  Sound System and you choose to NOT install audio/artswrapper, you need to

  - Uncheck "Run with the highest possible priority (realtime priority)"
    in Control Center/Sound & Multimedia/Sound System BEFORE updating arts

  OR:

  - AFTER updating arts and kdebase, go to Control Center/Sound & Multimedia/
    Sound System, click on the unchecked "Run with the highest possible priority
    (realtime priority)", dismiss the message telling you that realtime is un-
    available or artswrapper is missing and then click Apply.

20040305:
  AFFECTS: users of security/antivir-milter
  AUTHOR: netchild@FreeBSD.org

  When updating from a previous version of security/antivir-milter you
  have to do the following after deinstalling the old port:

    rm <PREFIX>/AntiVir/antivir
    rm <PREFIX>/AntiVir/antivir.vdf
    chown root:wheel <PREFIX>/AntiVir
    chown root:smmsp <PREFIX>/AntiVir/hbedv.key

  In your SENDMAIL_MC, please change

    `S=unix:<PREFIX>/AntiVir/avmilter.sock, F=T, T=S:10m;R:10m;E:5m'
  to
    `S=unix:/var/spool/avmilter/avmilter.sock, F=T, T=S:10m;R:10m;E:10m'

  and rebuild sendmail.cf.

  If /var/spool/avmilter exists, you have to:

    chown -R smmsp:smmsp /var/spool/avmilter

  If you are using a customized <PREFIX>/etc/avmilter.conf, the port won't
  remove it on deinstall and you have to manually change User and Group to
  smmsp there.

  Afterwards you can install the new version of this port.  You then should
  run antivirupdater to get a current VDF.

20040226:
  AFFECTS: i386 users of lang/ruby* and sysutils/portupgrade
  AUTHOR: knu@FreeBSD.org

  Change the default version of Ruby to 1.8 for i386.

  If you are a Ruby developer and want to keep Ruby 1.6 as default,
  please add RUBY_DEFAULT_VER=1.6 to /etc/make.conf.

  Otherwise, please run the following series of commands to migrate to
  Ruby 1.8:

  1) Reinstall portupgrade manually (and as a result Ruby 1.8 will be
     installed):
    pkg_delete portupgrade-\*
    (cd /usr/ports/sysutils/portupgrade; make install clean)

  2) Reinstall everything that depends on Ruby 1.6 to use Ruby 1.8
     instead:
    portupgrade -fr lang/ruby16

  3) Reinstall Ruby 1.8 (because the previous step kills symlinks):
    portupgrade -f lang/ruby18

  4) Deinstall Ruby 1.6 stuff (if you are feeling paranoid):
    pkg_deinstall -ri lang/ruby16

  5) If the above commands do now work somehow and portupgrade starts
     causing LoadError, please reinstall portupgrade manually again.
     Whenever you get confused, you can always deinstall portupgrade
     and all the Ruby stuff (run "pkg_delete -r ruby-\*") and
     reinstall portupgrade as a last resort.

20040204:
  AFFECTS: 5.2-CURRENT users who started with a 5.2-RELEASE or older.
  AUTHOR: obrien@FreeBSD.org

  Change the default version of Perl to 5.8.

  1) Force perl-5.6.1 to be upgraded with perl-5.8:
    portupgrade -o lang/perl5.8 -f perl-5.6.1_15

  2) Update all p5-* modules:
    portupgrade -f p5-\*

$FreeBSD$