path: root/www/squid32/Makefile

# $FreeBSD$
#
# Note:
# Starting with Squid 3.1 SQUID_LANGUAGES and SQUID_DEFAULT_LANG are no longer
# available and will be ignored.
#
# SQUID_CONFIGURE_ARGS
#   Additional configuration options.
#
#   To enable them, use e.g
#   `make SQUID_CONFIGURE_ARGS="--enable-ntml-fail-open" install'
#
#   The list below may be incomplete, please see the configure script
#   in the Squid source distribution for the complete list of additional
#   options.
#   Note that you probably do not need to worry about these options in most
#   cases, they are included in case you want to experiment with them.
#
#    --enable-xmalloc-statistics
#     Show malloc statistics in status page
#    --enable-cachemgr-hostname=some.hostname
#     Make cachemgr.cgi default to this host
#    --disable-unlinkd
#     Do not use "unlinkd"
#    --with-aufs-threads=N_THREADS
#     Tune the number of worker threads for the aufs object
#    --with-filedescriptors=N
#     Force Squid to use N filedescriptors.
#    --enable-ntlm-fail-open
#     Enable NTLM fail open, where a helper that fails one of the
#     Authentication steps can allow Squid to still authenticate the user
#    --enable-x-accelerator-vary
#     Enable support for the X-Accelerator-Vary HTTP header. Can be used
#     to indicate variance within an accelerator setup. Typically used
#     together with other code that adds custom HTTP headers to the
#     requests.

PORTNAME=   squid
PORTVERSION=    3.2.${SQUID_STABLE_VER}
CATEGORIES= www ipv6
MASTER_SITES=   ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
        http://mirrors.ccs.neu.edu/Squid/ \
        ftp://ftp.fu-berlin.de/unix/www/squid/squid/ \
        ftp://ftp.nl.uu.net/pub/unix/www/squid/ \
        ftp://ftp.solnet.ch/mirror/squid/ \
        ftp://ftp.ntua.gr/pub/www/Squid/squid/ \
        ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid,} \
        http://www.squid-cache.org/Versions/v3/3.2/ \
        http://www2.us.squid-cache.org/Versions/v3/3.2/ \
        http://www3.us.squid-cache.org/Versions/v3/3.2/ \
        http://www1.at.squid-cache.org/Versions/v3/3.2/ \
        http://www.eu.squid-cache.org/Versions/v3/3.2/ \
        http://www1.ie.squid-cache.org/Versions/v3/3.2/ \
        http://www1.jp.squid-cache.org/Versions/v3/3.2/ \
        http://www1.za.squid-cache.org/Versions/v3/3.2/
MASTER_SITE_SUBDIR= squid
DIST_SUBDIR=    squid3.2

PATCH_SITES=    http://www.squid-cache.org/%SUBDIR%/ \
        http://www2.us.squid-cache.org/%SUBDIR%/ \
        http://www3.us.squid-cache.org/%SUBDIR%/ \
        http://www1.at.squid-cache.org/%SUBDIR%/ \
        http://www.eu.squid-cache.org/%SUBDIR%/ \
        http://www1.ie.squid-cache.org/%SUBDIR%/ \
        http://www1.jp.squid-cache.org/%SUBDIR%/ \
        http://www2.tw.squid-cache.org/%SUBDIR%/
PATCH_SITE_SUBDIR=  Versions/v3/3.2/changesets
PATCHFILES= # empty

MAINTAINER= tmseck@web.de
COMMENT=    HTTP Caching Proxy

LICENSE=    GPLv2
LICENSE_FILE=   ${WRKSRC}/COPYING

LATEST_LINK=    squid32

SQUID_STABLE_VER=   3

CONFLICTS_INSTALL=  squid-2.[0-9].* squid-3.[!2].* cacheboy-[0-9]* lusca-head-[0-9]*
GNU_CONFIGURE=  yes
USE_BZIP2=  yes
USE_PERL5=  yes
USE_RC_SUBR=    squid

USERS=      squid
GROUPS=     squid

MAN1=       squidclient.1
MAN8=       cachemgr.cgi.8 squid.8
docs=       QUICKSTART README RELEASENOTES.html doc/debug-sections.txt
PORTDOCS=   ${docs:T}
PORTEXAMPLES=   *
SUB_FILES+= pkg-install pkg-message

OPTIONS_DEFINE= ARP_ACL AUTH_KERB AUTH_LDAP AUTH_NIS AUTH_SASL AUTH_SMB \
        CACHE_DIGESTS DEBUG DELAY_POOLS DNS_HELPER ECAP ESI \
        FOLLOW_XFF FS_AUFS FS_COSS HTCP ICAP ICMP IDENT IPV6 KQUEUE \
        LARGEFILE SNMP SSL SSL_CRTD STACKTRACES STRICT_HTTP \
        TP_IPF TP_IPFW TP_PF VIA_DB WCCP WCCPV2 

ARP_ACL_DESC=   Enable ARP/MAC/EUI based authentification
AUTH_KERB_DESC= Install Kerberos authentication helpers
AUTH_LDAP_DESC= Install LDAP authentication helpers
AUTH_NIS_DESC=  Install NIS/YP authentication helpers
AUTH_SASL_DESC= Install SASL authentication helpers
AUTH_SMB_DESC=  Install SMB auth. helpers (req. Samba)
CACHE_DIGESTS_DESC= Use cache digests
DEBUG_DESC= Build with extended debugging support
DELAY_POOLS_DESC=   Enable delay pools (bandwidth limiting)
DNS_HELPER_DESC=    Use external dnsserver processes for DNS
ECAP_DESC=  Enable loadable content adaptation modules
ESI_DESC=   Enable support for ESI
FOLLOW_XFF_DESC=    Enable support for the X-Following-For header
FS_AUFS_DESC=   Enable AUFS (async-io) support
FS_COSS_DESC=   Enable COSS (not stable yet)
HTCP_DESC=  Enable HTCP support
ICAP_DESC=  Enable the ICAP client
ICMP_DESC=  Enable ICMP pinging and network measurement
IDENT_DESC= Enable Ident lookups (RFC 931)
IPV6_DESC=  Enable IPv6 support
KQUEUE_DESC=    Enable kqueue(2) support
LARGEFILE_DESC= Support large (>2GB) cache and log files
SNMP_DESC=  Enable SNMP support
SSL_CRTD_DESC=  Use ssl_crtd to handle SSL cert requests
SSL_DESC=   Enable SSL gatewaying support
STACKTRACES_DESC=   Enable automatic backtraces on fatal errors
STRICT_HTTP_DESC=   Make Squid strictly HTTP compliant
TP_IPFW_DESC=   Enable transparent proxying with IPFW
TP_IPF_DESC=    Enable transparent proxying with IPFilter
TP_PF_DESC= Enable transparent proxying with PF
VIA_DB_DESC=    Enable Forward/Via database
WCCPV2_DESC=    Enable Web Cache Coordination Protocol v2
WCCP_DESC=  Enable Web Cache Coordination Protocol

OPTIONS_DEFAULT=    AUTH_KERB AUTH_NIS FS_AUFS HTCP IDENT IPV6 KQUEUE \
            SNMP WCCP WCCPV2

etc_files=  squid/cachemgr.conf.default \
        squid/errorpage.css.default \
        squid/mib.txt \
        squid/mime.conf.default \
        squid/msntauth.conf.default \
        squid/squid.conf.default \
        squid/squid.conf.documented

icon_silk_files=    application.png arrow_up.png bomb.png box.png \
            bricks.png bullet_red.png cd.png chart_line.png \
            compress.png computer_link.png css.png cup.png \
            database.png database_table.png drive_disk.png \
            film.png film_key.png folder.png folder_table.png \
            image.png information.png layers.png layout.png \
            link.png music.png package.png package_go.png \
            page_code.png page_excel.png page_green.png \
            page_white.png page_white_acrobat.png page_white_c.png \
            page_white_cplusplus.png page_white_flash.png \
            page_white_magnify.png page_white_picture.png \
            page_white_powerpoint.png page_white_stack.png \
            page_white_text.png page_world.png \
            page_white_word.png page_white_zip.png photo.png \
            picture.png plugin.png plugin_add.png script.png \
            script_gear.png script_palette.png

error_files=    ERR_ACCESS_DENIED ERR_ACL_TIME_QUOTA_EXCEEDED \
        ERR_AGENT_CONFIGURE ERR_AGENT_WPAD \
        ERR_CACHE_ACCESS_DENIED \
        ERR_CACHE_MGR_ACCESS_DENIED ERR_CONFLICT_HOST \
        ERR_CANNOT_FORWARD ERR_CONNECT_FAIL \
        ERR_DIR_LISTING ERR_DNS_FAIL \
        ERR_ESI ERR_FORWARDING_DENIED \
        ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \
        ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \
        ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \
        ERR_GATEWAY_FAILURE \
        ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \
        ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \
        ERR_ONLY_IF_CACHED_MISS ERR_PRECONDITION_FAILED \
        ERR_READ_ERROR ERR_READ_TIMEOUT \
        ERR_SECURE_CONNECT_FAIL ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE \
        ERR_TOO_BIG ERR_UNSUP_REQ ERR_UNSUP_HTTPVERSION \
        ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT \
        error-details.txt

error_dirs= af ar az bg ca cs da de el en es et fa fi fr he hu hy id it \
        ja ko lt lv ms nl oc pl pt pt-br ro ru sk sl sr-cyrl sr-latn \
        sv \
        th tr uk uz \
        vi zh-cn zh-tw \
        templates

error_dir_links=    ar-ae ar-bh ar-dz ar-eg ar-iq ar-jo ar-kw ar-lb \
            ar-ly ar-ma ar-om ar-qa ar-sa ar-sy ar-tn ar-ye \
            az-az bg-bg cs-cz da-dk \
            de-at de-ch de-de de-li de-lu \
            el-gr \
            en-au en-bz en-ca en-gb en-ie en-in en-jm en-nz \
            en-ph en-sg en-tt en-uk en-us en-za en-zw \
            es-ar es-bo es-cl es-co es-cr es-do es-ec es-es \
            es-gt es-hn es-mx es-ni es-pa es-pe es-pr es-py \
            es-sv es-uy es-ve \
            et-ee \
            fa-fa fa-ir fi-fi \
            fr-be fr-ca fr-ch fr-fr fr-lu fr-mc \
            he-il hu-hu hy-am hy-armn id-id it-ch it-it \
            ja-jp ko-kp ko-kr lt-lt lv-lv ms-my nl-nl \
            pl-pl pt-pt ro-md ro-ro ru-ru \
            sk-sk sl-si sr sr-latn-cs sr-sp sv-fi sv-se \
            th-th tr-tr uk-ua vi-vn zh-hk zh-mo zh-sg

libexec=    cachemgr.cgi \
        diskd \
        helper-mux.pl

.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == ""
libexec+=   unlinkd
.endif

sbin=       purge squidclient squid

CONFIGURE_ARGS= --with-default-user=squid \
        --bindir=${PREFIX}/sbin  \
        --sbindir=${PREFIX}/sbin  \
        --datadir=${ETCDIR} \
        --libexecdir=${PREFIX}/libexec/squid \
        --localstatedir=/var/squid \
        --sysconfdir=${ETCDIR} \
        --with-logdir=/var/log/squid \
        --with-pidfile=/var/run/squid/squid.pid \
        --enable-auth \
        --enable-build-info \
        --enable-loadable-modules \
        --enable-removal-policies="lru heap" \
        --disable-epoll \
        --disable-linux-netfilter \
        --disable-linux-tproxy \
        --disable-translation

.include <bsd.port.options.mk>
.include <bsd.port.pre.mk>

# Authentication methods and modules:
# TODO: external-session hängt wovon ab?

basic_auth= DB MSNT MSNT-multi-domain NCSA PAM POP3 RADIUS \
        fake getpwnam
digest_auth=    file
external_acl=   file_userip unix_group
ntlm_auth=  fake smb_lm
libexec+=   basic_db_auth \
        basic_fake_auth \
        basic_getpwnam_auth \
        basic_ncsa_auth \
        basic_msnt_auth \
        basic_msnt_multi_domain_auth \
        basic_pam_auth \
        basic_pop3_auth \
        basic_radius_auth \
        digest_file_auth \
        ext_file_userip_acl \
        ext_unix_group_acl \
        ntlm_fake_auth \
        ntlm_smb_lm_auth
MAN8+=      basic_getpwnam_auth.8 basic_ncsa_auth.8 basic_pam_auth.8 \
        basic_radius_auth.8 basic_db_auth.8 \
        digest_file_auth.8 \
        ext_file_userip_acl.8 ext_unix_group_acl.8
.if ${PORT_OPTIONS:MAUTH_LDAP}
USE_OPENLDAP=   yes
CFLAGS+=    -I${LOCALBASE}/include
LDFLAGS+=   -L${LOCALBASE}/lib
MAN8+=      basic_ldap_auth.8 ext_ldap_group_acl.8
basic_auth+=    LDAP
external_acl+=  LDAP_group
libexec+=   basic_ldap_auth ext_ldap_group_acl
.endif
.if ${PORT_OPTIONS:MAUTH_SASL}
LIB_DEPENDS+=   sasl2.2:${PORTSDIR}/security/cyrus-sasl2
CFLAGS+=    -I${LOCALBASE}/include
CPPFLAGS+=  -I${LOCALBASE}/include
LDFLAGS+=   -L${LOCALBASE}/lib
MAN8+=      basic_sasl_auth.8
basic_auth+=    SASL
libexec+=   basic_sasl_auth
.endif
.if ${PORT_OPTIONS:MAUTH_SMB}
# TODO: build-depends entfernen, wird nur für den configure-check gebraucht
BUILD_DEPENDS+= smbclient:${PORTSDIR}/net/samba36
RUN_DEPENDS+=   smbclient:${PORTSDIR}/net/samba36
basic_auth+=    SMB
external_acl+=  wbinfo_group
libexec+=   basic_smb_auth basic_smb_auth.sh \
        ext_wbinfo_group_acl
MAN8+=      ext_wbinfo_group_acl.8
.endif
# POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too:
.if ${PORT_OPTIONS:MAUTH_NIS} && !defined(NO_NIS) && !defined(WITHOUT_NIS)
basic_auth+=    NIS
libexec+=   basic_nis_auth
.endif
CONFIGURE_ARGS+=    --enable-auth-basic="${basic_auth}" \
            --enable-auth-digest="${digest_auth}" \
            --enable-external-acl-helpers="${external_acl}" \
            --enable-auth-ntlm="${ntlm_auth}"
# TODO:
#  - configure-Skript auf bashisms prüfen
#  - external/kerberos_ldap_group immer mit installieren?
#  - gehört wrapper auch zu kerberos oder kann man den immer installieren?
#  - negotiate_auth-Variable einführen
# POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too:
.if ${PORT_OPTIONS:MAUTH_KERB} && !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS)
CONFIGURE_ARGS+=    --enable-auth-negotiate="kerberos wrapper"
libexec+=   negotiate_kerberos_auth negotiate_kerberos_auth_test \
        negotiate_wrapper_auth
MAN8+=      negotiate_kerberos_auth.8
.else
CONFIGURE_ARGS+=    --enable-auth-negotiate="none"
.endif

# Storage schemes:

storage_schemes=    diskd rock ufs
diskio_modules= AIO Blocking DiskDaemon IpcIo Mmapped
.if ${PORT_OPTIONS:MFS_AUFS}
storage_schemes+=   aufs
diskio_modules+=    DiskThreads
# Only document switching from libpthread to libthr using libmap.conf
# where lipthread is still the default threading library:
.if ${OSVERSION} < 700041
EXTRA_PATCHES+=     ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs
.endif
# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS,
# e.g. SQUID_CONFIGURE_ARGS=--with-aufs-threads=N
CFLAGS+=    ${PTHREAD_CFLAGS}
LDFLAGS+=   ${PTHREAD_LIBS}
.else
CONFIGURE_ARGS+=    --without-pthreads
.endif
.if ${PORT_OPTIONS:MFS_COSS}
storage_schemes+=   coss
.endif
CONFIGURE_ARGS+=    --enable-storeio="${storage_schemes}"
CONFIGURE_ARGS+=    --enable-disk-io="${diskio_modules}"

# Log daemon helpers:

logdaemon_helpers=  file
CONFIGURE_ARGS+=    --enable-log-daemon-helpers="${logdaemon_helpers}"
libexec+=   log_file_daemon

# Rewrite helpers:

rewrite_helpers=    fake
CONFIGURE_ARGS+=    --enable-url-rewrite-helpers="${rewrite_helpers}"
libexec+=   url_fake_rewrite url_fake_rewrite.sh

# Other options set via 'make config':

.if empty(PORT_OPTIONS:MIPV6) || defined(WITHOUT_IPV6)
CONFIGURE_ARGS+=    --disable-ipv6
.endif
.if ${PORT_OPTIONS:MDELAY_POOLS}
CONFIGURE_ARGS+=    --enable-delay-pools
.endif
.if empty(PORT_OPTIONS:MSNMP)
CONFIGURE_ARGS+=    --disable-snmp
.endif
.if ${PORT_OPTIONS:MSSL}
# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only
# works when it is defined before bsd.port{.pre}.mk is .included.
# This makes it currently impossible to combine this macro with OPTIONS to
# conditionally include OpenSSL support.
# XXX: is this still true with OptionsNG as of 2012-10?
.include "${PORTSDIR}/Mk/bsd.openssl.mk"
CONFIGURE_ARGS+=    --enable-ssl \
            --with-openssl="${OPENSSLBASE}"
CFLAGS+=    -I${OPENSSLINC}
LDFLAGS+=   -L${OPENSSLLIB}
.endif
.if ${PORT_OPTIONS:MSSL_CRTD}
CONFIGURE_ARGS+=    --enable-ssl-crtd
libexec+=   ssl_crtd
.endif
.if ${PORT_OPTIONS:MICMP}
CONFIGURE_ARGS+=    --enable-icmp
libexec+=   pinger
.endif
.if ${PORT_OPTIONS:MDNS_HELPER}
CONFIGURE_ARGS+=    --disable-internal-dns
libexec+=   dnsserver
.endif
.if empty(PORT_OPTIONS:MHTCP)
CONFIGURE_ARGS+=    --disable-htcp
.else
CONFIGURE_ARGS+=    --enable-htcp
.endif
.if ${PORT_OPTIONS:MVIA_DB}
CONFIGURE_ARGS+=    --enable-forw-via-db
.else
CONFIGURE_ARGS+=    --disable-forw-via-db
.endif
.if ${PORT_OPTIONS:MCACHE_DIGESTS}
CONFIGURE_ARGS+=    --enable-cache-digests
.else
CONFIGURE_ARGS+=    --disable-cache-digests
.endif
.if ${PORT_OPTIONS:MWCCP}
CONFIGURE_ARGS+=    --enable-wccp
.else
CONFIGURE_ARGS+=    --disable-wccp
.endif
.if ${PORT_OPTIONS:MWCCPV2}
CONFIGURE_ARGS+=    --enable-wccpv2
.else
CONFIGURE_ARGS+=    --disable-wccpv2
.endif
.if ${PORT_OPTIONS:MSTRICT_HTTP}
CONFIGURE_ARGS+=    --disable-http-violations
.endif
.if empty(PORT_OPTIONS:MIDENT)
CONFIGURE_ARGS+=    --disable-ident-lookups
.endif
.if ${PORT_OPTIONS:MARP_ACL}
CONFIGURE_ARGS+=    --enable-eui
.else
CONFIGURE_ARGS+=    --disable-eui
.endif
.if ${PORT_OPTIONS:MTP_IPFW}
CONFIGURE_ARGS+=    --enable-ipfw-transparent
.else
CONFIGURE_ARGS+=    --disable-ipfw-transparent
.endif
.if ${PORT_OPTIONS:MTP_PF}
CONFIGURE_ARGS+=    --enable-pf-transparent
.else
CONFIGURE_ARGS+=    --disable-pf-transparent
.endif
.if ${PORT_OPTIONS:MTP_IPF}
CONFIGURE_ARGS+=    --enable-ipf-transparent
.else
CONFIGURE_ARGS+=    --disable-ipf-transparent
.endif
.if ${PORT_OPTIONS:MFOLLOW_XFF}
CONFIGURE_ARGS+=    --enable-follow-x-forwarded-for
.else
CONFIGURE_ARGS+=    --disable-follow-x-forwarded-for
.endif
.if ${PORT_OPTIONS:MECAP}
CONFIGURE_ARGS+=    --enable-ecap
LIB_DEPENDS+=   ecap:${PORTSDIR}/www/libecap
CFLAGS+=    -I${LOCALBASE}/include
LDFLAGS+=   -L${LOCALBASE}/lib
USE_PKGCONFIG=  build
.else
CONFIGURE_ARGS+=    --disable-ecap
.endif
.if ${PORT_OPTIONS:MICAP}
CONFIGURE_ARGS+=    --enable-icap-client
.else
CONFIGURE_ARGS+=    --disable-icap-client
.endif
.if ${PORT_OPTIONS:MESI}
CONFIGURE_ARGS+=    --enable-esi
LIB_DEPENDS+=   expat:${PORTSDIR}/textproc/expat2 \
        xml2:${PORTSDIR}/textproc/libxml2
CFLAGS+=    -I${LOCALBASE}/include -I${LOCALBASE}/include/libxml2
LDFLAGS+=   -L${LOCALBASE}/lib
.else
CONFIGURE_ARGS+=    --disable-esi
.endif
.if empty(PORT_OPTIONS:MKQUEUE)
# Squid-3's kqueue support is still marked as experimental, so it is not yet
# enabled automatically as in Squid-2. We are explicit about disabling it,
# nonetheless:
CONFIGURE_ARGS+=    --disable-kqueue
.else
CONFIGURE_ARGS+=    --enable-kqueue
.endif
.if ${PORT_OPTIONS:MLARGEFILE}
CONFIGURE_ARGS+=    --with-large-files
.endif
.if ${PORT_OPTIONS:MSTACKTRACES}
CONFIGURE_ARGS+=    --enable-stacktraces
CFLAGS+=        -g
STRIP=
.endif
.if ${PORT_OPTIONS:MDEBUG} || defined(WITH_DEBUG)
CONFIGURE_ARGS+=    --disable-optimizations --enable-debug-cbdata
WITH_DEBUG?=        yes
.endif

# Finally, add additional user specified configuration options:
CONFIGURE_ARGS+=    ${SQUID_CONFIGURE_ARGS}

PLIST_DIRS= %%ETCDIR%%/icons/silk %%ETCDIR%%/icons libexec/squid
PLIST_FILES=    ${etc_files:S,^,etc/,} \
        %%ETCDIR%%/icons/SN.png \
        ${icon_silk_files:S,^,%%ETCDIR%%/icons/silk/,} \
        ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,}

PLIST_FILES+=   %%ETCDIR%%/errors/COPYRIGHT %%ETCDIR%%/errors/TRANSLATORS
.for d in ${error_dirs}
PLIST_DIRS+=    %%ETCDIR%%/errors/${d}
PLIST_FILES+=   ${error_files:S,^,%%ETCDIR%%/errors/${d}/,}
.endfor
PLIST_FILES+=   ${error_dir_links:S,^,%%ETCDIR%%/errors/,}
PLIST_DIRS+=    %%ETCDIR%%/errors
PLIST_DIRSTRY+= %%ETCDIR%%

post-patch:
    @${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \
        ${WRKSRC}/src/cf.data.pre

pre-install:
# Prevent installation of .orig files by deleting them.
    @${FIND} ${WRKSRC} -name '*.bak' -delete
    @${FIND} ${WRKSRC} -name '*.orig' -delete

pre-su-install:
    @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \
        ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL

post-install:
.if !defined(NOPORTEXAMPLES)
    @${MKDIR} ${EXAMPLESDIR}
    ${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR}
.endif
.if ${PORT_OPTIONS:MICMP}
    ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \
    ${CHGRP} squid ${PREFIX}/libexec/squid/pinger
.endif
.if !defined(NOPORTDOCS)
    @${MKDIR} ${DOCSDIR}
    cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR}
.endif
    @${SETENV} PKG_PREFIX=${PREFIX} \
        ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL

    @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:"
    @${ECHO_CMD} ""
    @${CAT} ${PKGMESSAGE}
    @${ECHO_CMD} ""

.include <bsd.port.post.mk>