# New ports collection makefile for: amanda # Date created: 28th Feb 1995 # Whom: gpalmer # # $FreeBSD$ # PORTNAME?= ${MASTERPORTNAME} PORTVERSION= 2.4.4p4 PORTREVISION?= 1 PORTEPOCH= 1 CATEGORIES= misc MASTER_SITES= ${MASTER_SITE_SOURCEFORGE} MASTER_SITE_SUBDIR= amanda DISTFILES= amanda-${PORTVERSION}${EXTRACT_SUFX} MAINTAINER= jeh@FreeBSD.org COMMENT?= The Advanced Maryland Automatic Network Disk Archiver (server) WRKSRC= ${WRKDIR}/amanda-${PORTVERSION} SLAVEDIRS= misc/amanda-client MASTERPORTNAME= amanda-server NO_LATEST_LINK= yes USE_AUTOCONF_VER= 259 USE_GMAKE= yes PATCH_STRIP= .include .if exists(/usr/include/sys/scsiio.h) .error You have the file /usr/include/sys/scsiio.h on your system. This was removed after FreeBSD 3.5 and will break the build of this port. Please remove it. .endif CONFIGURE_TARGET= --build=${MACHINE_ARCH}-portbld-freebsd${OSREL} AMANDA_USER?= operator AMANDA_GROUP?= operator # amanda-server part .if !defined(CLIENT_ONLY) pre-fetch: @${ECHO} "" @${ECHO} "You may use the following build options:" @${ECHO} "" @${ECHO} " -DWITH_PLOT to enable ploting, requires X11 libraries" @${ECHO} " -DWITH_SAMBA to enable the use of smbclient" @${ECHO} " -DWITH_MTX to enable the use of mtx changer scripts" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_TAPE=tape to specify the default tape device" @${ECHO} " The default is /dev/nrsa0" @${ECHO} " AMANDA_CONFIG=config to specify the default configuration" @${ECHO} " The default is user" @${ECHO} " AMANDA_USER=user to specify the default user" @${ECHO} " The default is operator" @${ECHO} " AMANDA_GROUP=group to specify the default group" @${ECHO} " The default is operator" @${ECHO} " AMANDA_PORTRANGE=low,high to restrict Amanda to TCP ports" @${ECHO} " between low and high when connecting from the server" @${ECHO} " to the client for data, messages, and indexing." @${ECHO} " The default is no restriction on TCP ports." @${ECHO} " AMANDA_UDPPORTRANGE=low,high to restrict Amanda to UDP ports" @${ECHO} " between low and high when connecting from the client" @${ECHO} " to the server. Use ports below 1024." @${ECHO} " The default is no restriction on UDP ports." @${ECHO} "" USE_PERL5= yes RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda-client BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda-client CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --without-client --disable-libtool --prefix=${PREFIX} \ --with-user=${AMANDA_USER} --with-group=${AMANDA_GROUP} MAN8= amadmin.8 amcheck.8 amcheckdb.8 amcleanup.8 amdd.8 \ amdump.8 amflush.8 amgetconf.8 amlabel.8 ammt.8 \ amoverview.8 amreport.8 amrmtape.8 amstatus.8 \ amtape.8 amtoc.8 amverify.8 amverifyrun.8 amtapetype.8 .if defined (WITH_PLOT) BUILD_DEPENDS+= gnuplot:${PORTSDIR}/math/gnuplot RUN_DEPENDS+= gnuplot:${PORTSDIR}/math/gnuplot MAN8+= amplot.8 PLIST_SUB+= PLOT='' .else PLIST_SUB+= PLOT='@comment ' .endif .if defined (WITH_SAMBA) BUILD_DEPENDS+= smbclient:${PORTSDIR}/net/samba RUN_DEPENDS+= smbclient:${PORTSDIR}/net/samba CONFIGURE_ARGS+= --with-smbclient=${PREFIX}/bin/smbclient .endif .if defined (WITH_MTX) BUILD_DEPENDS+= mtx:${PORTSDIR}/misc/mtx RUN_DEPENDS+= mtx:${PORTSDIR}/misc/mtx .endif .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} .endif .if defined (AMANDA_TAPE) CONFIGURE_ARGS+= --with-tape-device=${AMANDA_TAPE} .endif .if defined (AMANDA_CONFIG) CONFIGURE_ARGS+= --with-config=${AMANDA_CONFIG} .endif .if defined (AMANDA_UDPPORTRANGE) CONFIGURE_ARGS+= --with-udpportrange=${AMANDA_UDPPORTRANGE} .endif .if defined (AMANDA_PORTRANGE) CONFIGURE_ARGS+= --with-portrange=${AMANDA_PORTRANGE} .endif # # Before 4.0, pre-CAM scsiio.h existed .if ${OSVERSION} < 400000 PLIST_SUB+= SCSICHG='' .elif ${OSVERSION} >= 480000 .if ${MACHINE_ARCH} == "amd64" PLIST_SUB+= SCSICHG='@comment ' .elif ${OSVERSION} >= 502000 PLIST_SUB+= SCSICHG='@comment ' .else PLIST_SUB+= SCSICHG='' .endif .else PLIST_SUB+= SCSICHG='@comment ' .endif # amanda-client part .else pre-fetch: @${ECHO} "" @${ECHO} "You may use the following build options:" @${ECHO} "" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_CONFIG=config to specify the default configuation" @${ECHO} " The default is user" @${ECHO} " AMANDA_GNUTAR_LISTDIR=dir to specify the directory that" @${ECHO} " the gnutar index files should live in" @${ECHO} " The default is /var/amanda/gnutar-lists" @${ECHO} " AMANDA_USER=user to specify the default user" @${ECHO} " The default is operator" @${ECHO} " AMANDA_GROUP=group to specify the default group" @${ECHO} " The default is operator" @${ECHO} " AMANDA_PORTRANGE=low,high to restrict Amanda to TCP ports" @${ECHO} " between low and high when connecting from the server" @${ECHO} " to the client for data, messages, and indexing." @${ECHO} " The default is no restriction on TCP ports." @${ECHO} " AMANDA_UDPPORTRANGE=low,high to restrict Amanda to UDP ports" @${ECHO} " between low and high when connecting from the client" @${ECHO} " to the server. Use ports below 1024." @${ECHO} " The default is no restriction on UDP ports." @${ECHO} "" CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --without-server --disable-libtool --prefix=${PREFIX} \ --with-user=${AMANDA_USER} --with-group=${AMANDA_GROUP} MAN8= amanda.8 amrecover.8 amrestore.8 post-install: ${MKDIR} ${PREFIX}/share/examples/amanda ${CP} -R ${WRKSRC}/example/amanda.conf \ ${WRKSRC}/example/chg-multi.conf \ ${WRKSRC}/example/chg-scsi.conf \ ${WRKSRC}/example/disklist \ ${PREFIX}/share/examples/amanda ${MKDIR} ${PREFIX}/var/amanda/gnutar-lists ${CHOWN} ${AMANDA_USER}:${AMANDA_GROUP} ${PREFIX}/var/amanda/gnutar-lists ${TOUCH} /etc/amandates ${CHOWN} ${AMANDA_USER}:${AMANDA_GROUP} /etc/amandates .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} .endif .if defined (AMANDA_CONFIG) CONFIGURE_ARGS+= --with-config=${AMANDA_CONFIG} .endif .if defined (AMANDA_GNUTAR_LISTDIR) CONFIGURE_ARGS+= --with-gnutar-listdir=${AMANDA_GNUTAR_LISTDIR} .endif .if defined (AMANDA_UDPPORTRANGE) CONFIGURE_ARGS+= --with-udpportrange=${AMANDA_UDPPORTRANGE} .endif .if defined (AMANDA_PORTRANGE) CONFIGURE_ARGS+= --with-portrange=${AMANDA_PORTRANGE} .endif .endif .include 42b36c6'>crrcsim
Commit message (Expand)AuthorAgeFilesLines
* Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.mat2016-04-011-2/+2
* Convert to USES=jpegantoine2015-06-231-3/+2
* Update portaudio to v19/Remove portaudio2 [1]bapt2015-05-311-4/+4
* Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla intijl2014-12-09