/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8; fill-column: 160 -*- */ /* camel-mime-part-utils : Utility for mime parsing and so on * * Authors: Bertrand Guiheneuf * Michael Zucchi * * Copyright 1999, 2000 Helix Code, Inc. (http://www.helixcode.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA */ #include #include #include "gmime-content-field.h" #include "string-utils.h" #include "camel-mime-part-utils.h" #include "camel-mime-message.h" #include "camel-multipart.h" #include "camel-seekable-substream.h" #include "camel-stream-filter.h" #include "camel-stream-mem.h" #include "camel-mime-filter-basic.h" #include "camel-mime-filter-charset.h" #include "camel-mime-filter-crlf.h" #define d(x) /* simple data wrapper */ static void simple_data_wrapper_construct_from_parser(CamelDataWrapper *dw, CamelMimeParser *mp) { GByteArray *buffer; char *buf; int len; off_t start = 0, end; CamelMimeFilter *fdec = NULL, *fcrlf = NULL, *fch = NULL; struct _header_content_type *ct; int decid=-1, crlfid=-1, chrid=-1; CamelStream *source; CamelSeekableStream *seekable_source = NULL; char *encoding; d(printf("constructing data-wrapper\n")); /* Ok, try and be smart. If we're storing a small message (typical) convert it, and store it in memory as we parse it ... if not, throw away the conversion and scan till the end ... */ /* if we can't seek, dont have a stream/etc, then we must cache it */ source = camel_mime_parser_stream(mp); if (source) { camel_object_ref((CamelObject *)source); if (CAMEL_IS_SEEKABLE_STREAM (source)) { seekable_source = CAMEL_SEEKABLE_STREAM (source); } } /* first, work out conversion, if any, required, we dont care about what we dont know about */ encoding = header_content_encoding_decode(camel_mime_parser_header(mp, "content-transfer-encoding", NULL)); if (encoding) { if (!strcasecmp(encoding, "base64")) { d(printf("Adding base64 decoder ...\n")); fdec = (CamelMimeFilter *)camel_mime_filter_basic_new_type(CAMEL_MIME_FILTER_BASIC_BASE64_DEC); decid = camel_mime_parser_filter_add(mp, fdec); } else if (!strcasecmp(encoding, "quoted-printable")) { d(printf("Adding quoted-printable decoder ...\n")); fdec = (CamelMimeFilter *)camel_mime_filter_basic_new_type(CAMEL_MIME_FILTER_BASIC_QP_DEC); decid = camel_mime_parser_filter_add(mp, fdec); } g_free(encoding); } /* If we're doing text, we also need to do CRLF->LF and may have to convert it to UTF8 as well. */ ct = camel_mime_parser_content_type(mp); if (header_content_type_is(ct, "text", "*")) { const char *charset = header_content_type_param(ct, "charset"); if (fdec) { d(printf("Adding CRLF conversion filter\n")); fcrlf = (CamelMimeFilter *)camel_mime_filter_crlf_new(CAMEL_MIME_FILTER_CRLF_DECODE, CAMEL_MIME_FILTER_CRLF_MODE_CRLF_ONLY); crlfid = camel_mime_parser_filter_add(mp, fcrlf); } if (charset!=NULL && !(strcasecmp(charset, "us-ascii")==0 || strcasecmp(charset, "utf-8")==0)) { d(printf("Adding conversion filter from %s to UTF-8\n", charset)); fch = (CamelMimeFilter *)camel_mime_filter_charset_new_convert(charset, "UTF-8"); if (fch) { chrid = camel_mime_parser_filter_add(mp, (CamelMimeFilter *)fch); } else { g_warning("Cannot convert '%s' to 'UTF-8', message display may be corrupt", charset); } } } buffer = g_byte_array_new(); if (seekable_source /* !cache */) { start = camel_mime_parser_tell(mp) + seekable_source->bound_start; } while ( camel_mime_parser_step(mp, &buf, &len) != HSCAN_BODY_END ) { if (buffer) { if (buffer->len > 20480 && seekable_source) { /* is this a 'big' message? Yes? We dont want to convert it all then.*/ camel_mime_parser_filter_remove(mp, decid); camel_mime_parser_filter_remove(mp, chrid); decid = -1; chrid = -1; g_byte_array_free(buffer, TRUE); buffer = NULL; } else { g_byte_array_append(buffer, buf, len); } } } if (buffer) { CamelStream *mem; d(printf("Small message part, kept in memory!\n")); mem = camel_stream_mem_new_with_byte_array(buffer); camel_data_wrapper_construct_from_stream (dw, mem); camel_object_unref ((CamelObject *)mem); } else { CamelStream *sub; CamelStreamFilter *filter; d(printf("Big message part, left on disk ...\n")); end = camel_mime_parser_tell(mp) + seekable_source->bound_start; sub = camel_seekable_substream_new_with_seekable_stream_and_bounds (seekable_source, start, end); if (fdec || fch) { filter = camel_stream_filter_new_with_stream(sub); if (fdec) { camel_mime_filter_reset(fdec); camel_stream_filter_add(filter, fdec); } if (fcrlf) { camel_mime_filter_reset(fcrlf); camel_stream_filter_add(filter, fcrlf); } if (fch) { camel_mime_filter_reset(fch); camel_stream_filter_add(filter, fch); } camel_data_wrapper_construct_from_stream (dw, (CamelStream *)filter); camel_object_unref ((CamelObject *)filter); } else { camel_data_wrapper_construct_from_stream (dw, sub); } camel_object_unref ((CamelObject *)sub); } camel_mime_parser_filter_remove(mp, decid); camel_mime_parser_filter_remove(mp, crlfid); camel_mime_parser_filter_remove(mp, chrid); if (fdec) camel_object_unref((CamelObject *)fdec); if (fcrlf) camel_object_unref((CamelObject *)fcrlf); if (fch) camel_object_unref((CamelObject *)fch); if (source) camel_object_unref((CamelObject *)source); } /* This replaces the data wrapper repository ... and/or could be replaced by it? */ void camel_mime_part_construct_content_from_parser(CamelMimePart *dw, CamelMimeParser *mp) { CamelDataWrapper *content = NULL; char *buf; int len; switch (camel_mime_parser_state(mp)) { case HSCAN_HEADER: d(printf("Creating body part\n")); content = camel_data_wrapper_new(); simple_data_wrapper_construct_from_parser(content, mp); break; case HSCAN_MESSAGE: d(printf("Creating message part\n")); content = (CamelDataWrapper *)camel_mime_message_new(); camel_mime_part_construct_from_parser((CamelMimePart *)content, mp); break; case HSCAN_MULTIPART: { CamelDataWrapper *bodypart; #ifndef NO_WARNINGS #warning This should use a camel-mime-multipart #endif d(printf("Creating multi-part\n")); content = (CamelDataWrapper *)camel_multipart_new(); /* FIXME: use the real boundary? */ camel_multipart_set_boundary((CamelMultipart *)content, NULL); while (camel_mime_parser_step(mp, &buf, &len) != HSCAN_MULTIPART_END) { camel_mime_parser_unstep(mp); bodypart = (CamelDataWrapper *)camel_mime_part_new(); camel_mime_part_construct_from_parser((CamelMimePart *)bodypart, mp); camel_multipart_add_part((CamelMultipart *)content, (CamelMimePart *)bodypart); camel_object_unref ((CamelObject *)bodypart); } /* these are only return valid data in the MULTIPART_END state */ camel_multipart_set_preface((CamelMultipart *)content, camel_mime_parser_preface(mp)); camel_multipart_set_postface((CamelMultipart *)content, camel_mime_parser_postface(mp)); d(printf("Created multi-part\n")); break; } default: g_warning("Invalid state encountered???: %d", camel_mime_parser_state(mp)); } if (content) { #ifndef NO_WARNINGS #warning there just has got to be a better way ... to transfer the mime-type to the datawrapper #endif /* would you believe you have to set this BEFORE you set the content object??? oh my god !!!! */ camel_data_wrapper_set_mime_type_field (content, camel_mime_part_get_content_type ((CamelMimePart *)dw)); camel_medium_set_content_object((CamelMedium *)dw, content); camel_object_unref ((CamelObject *)content); } } span>/+256 * - Actually make nagios work with stagingmat2013-12-271-10/+4 * Fix tac.cgi location for people with redefined $cgi_base_url in config.inc.php.demon2013-12-271-3/+11 * Replace meaningless startpage with tactical overview.demon2013-12-271-0/+11 * Update to 3.5.1.demon2013-09-161-7/+8 * - update to 3.5.0rm2013-03-241-5/+5 * - update to 3.4.4rm2013-02-162-122/+5 * - Fix all cases of 'No newline at end of file' in ports treeak2013-02-011-1/+1 * - add upstream patch for CVE-2012-6096rm2013-01-111-0/+117 * - update to 3.4.3 [1]rm2013-01-111-5/+5 * - Update to Nagios 3.4.1.scheidell2012-05-212-46/+49 * In the rc.d scripts, change assignments to rcvar to use thedougb2012-01-141-1/+1 * - Add configtest command to rc scriptzi2011-09-301-1/+2 * - Update to 3.3.1 [1]zi2011-08-237-123/+65 * - Update to 3.2.1 [1]mm2010-04-181-12/+12 * Begin the process of deprecating sysutils/rc_subr bydougb2010-03-271-1/+1 * - The nagios documentationpgollucci2010-01-081-1/+35 * - Remov empty patchmiwi2009-12-021-0/+0 * - Minor change of pkg-message.inwen2009-12-021-1/+1 * - Update to 3.2.0miwi2009-11-286-116/+26 * Fix a few "bad example" problems in the rc.d scripts that have beendougb2009-07-161-1/+0 * - Address command injection vulnerabilitywxs2009-07-141-0/+51 * - Fix runtime problem with embedded perl.wxs2009-05-041-0/+38 * - Update to 3.0.5miwi2008-11-093-26/+17 * - Update to 3.0.4miwi2008-10-243-2/+33 * - repocopy net-mgmt/nagios -> net-mgmt/nagios2pgollucci2008-09-0311-88/+149 * - Update to 2.11 [1]rafan2008-03-221-3/+12 * Link with libthr when available. This should fix the CPU consumptionwxs2008-02-051-4/+38 * - Update to 2.10miwi2007-12-122-22/+16 * - Use registered UID and GID. See UPDATING for migration.rafan2007-04-071-2/+7 * - Update to 2.7pav2007-01-282-0/+60