.. index:: type .. _types: ***** Types ***** Solidity is a statically typed language, which means that the type of each variable (state and local) needs to be specified (or at least known - see :ref:`type-deduction` below) at compile-time. Solidity provides several elementary types which can be combined to complex types. .. index:: ! value type, ! type;value Value Types =========== The following types are also called value types because variables of these types will always be passed by value, i.e. they are always copied when they are used as function arguments or in assignments. .. index:: ! bool, ! true, ! false Booleans -------- ``bool``: The possible values are constants ``true`` and ``false``. Operators: * ``!`` (logical negation) * ``&&`` (logical conjunction, "and") * ``||`` (logical disjunction, "or") * ``==`` (equality) * ``!=`` (inequality) The operators ``||`` and ``&&`` apply the common short-circuiting rules. This means that in the expression ``f(x) || g(y)``, if ``f(x)`` evaluates to ``true``, ``g(y)`` will not be evaluated even if it may have side-effects. .. index:: ! uint, ! int, ! integer Integers -------- ``int`` / ``uint``: Signed and unsigned integers of various sizes. Keywords ``uint8`` to ``uint256`` in steps of ``8`` (unsigned of 8 up to 256 bits) and ``int8`` to ``int256``. ``uint`` and ``int`` are aliases for ``uint256`` and ``int256``, respectively. Operators: * Comparisons: ``<=``, ``<``, ``==``, ``!=``, ``>=``, ``>`` (evaluate to ``bool``) * Bit operators: ``&``, ``|``, ``^`` (bitwise exclusive or), ``~`` (bitwise negation) * Arithmetic operators: ``+``, ``-``, unary ``-``, unary ``+``, ``*``, ``/``, ``%`` (remainder), ``**`` (exponentiation) Division always truncates (it just maps to the DIV opcode of the EVM), but it does not truncate if both operators are :ref:`literals` (or literal expressions). .. index:: address, balance, send, call, callcode, delegatecall .. _address: Address ------- ``address``: Holds a 20 byte value (size of an Ethereum address). Address types also have members and serve as base for all contracts. Operators: * ``<=``, ``<``, ``==``, ``!=``, ``>=`` and ``>`` Members of Addresses ^^^^^^^^^^^^^^^^^^^^ * ``balance`` and ``send`` For a quick reference, see :ref:`balance` and :ref:`send`. It is possible to query the balance of an address using the property ``balance`` and to send Ether (in units of wei) to an address using the ``send`` function: :: address x = 0x123; address myAddress = this; if (x.balance < 10 && myAddress.balance >= 10) x.send(10); .. note:: If ``x`` is a contract address, its code (more specifically: its fallback function, if present) will be executed together with the ``send`` call (this is a limitation of the EVM and cannot be prevented). If that execution runs out of gas or fails in any way, the Ether transfer will be reverted. In this case, ``send`` returns ``false``. .. warning:: There are some dangers in using ``send``: The transfer fails if the call stack depth is at 1023 (this can always be forced by the caller) and it also fails if the recipient runs out of gas. So in order to make safe Ether transfers, always check the return value of ``send`` or even better: Use a pattern where the recipient withdraws the money. * ``call``, ``callcode`` and ``delegatecall`` Furthermore, to interface with contracts that do not adhere to the ABI, the function ``call`` is provided which takes an arbitrary number of arguments of any type. These arguments are padded to 32 bytes and concatenated. One exception is the case where the first argument is encoded to exactly four bytes. In this case, it is not padded to allow the use of function signatures here. :: address nameReg = 0x72ba7d8e73fe8eb666ea66babc8116a41bfb10e2; nameReg.call("register", "MyName"); nameReg.call(bytes4(sha3("fun(uint256)")), a); ``call`` returns a boolean indicating whether the invoked function terminated (``true``) or caused an EVM exception (``false``). It is not possible to access the actual data returned (for this we would need to know the encoding and size in advance). In a similar way, the function ``delegatecall`` can be used: The difference is that only the code of the given address is used, all other aspects (storage, balance, ...) are taken from the current contract. The purpose of ``delegatecall`` is to use library code which is stored in another contract. The user has to ensure that the layout of storage in both contracts is suitable for delegatecall to be used. Prior to homestead, only a limited variant called ``callcode`` was available that did not provide access to the original ``msg.sender`` and ``msg.value`` values. All three functions ``call``, ``delegatecall`` and ``callcode`` are very low-level functions and should only be used as a *last resort* as they break the type-safety of Solidity. .. note:: All contracts inherit the members of address, so it is possible to query the balance of the current contract using ``this.balance``. .. index:: byte array, bytes32 Fixed-size byte arrays ---------------------- ``bytes1``, ``bytes2``, ``bytes3``, ..., ``bytes32``. ``byte`` is an alias for ``bytes1``. Operators: * Comparisons: ``<=``, ``<``, ``==``, ``!=``, ``>=``, ``>`` (evaluate to ``bool``) * Bit operators: ``&``, ``|``, ``^`` (bitwise exclusive or), ``~`` (bitwise negation) * Index access: If ``x`` is of type ``bytesI``, then ``x[k]`` for ``0 <= k < I`` returns the ``k`` th byte (read-only). Members: * ``.length`` yields the fixed length of the byte array (read-only). Dynamically-sized byte array ---------------------------- ``bytes``: Dynamically-sized byte array, see :ref:`arrays`. Not a value-type! ``string``: Dynamically-sized UTF8-encoded string, see :ref:`arrays`. Not a value-type! As a rule of thumb, use ``bytes`` for arbitrary-length raw byte data and ``string`` for arbitrary-length string (utf-8) data. If you can limit the length to a certain number of bytes, always use one of ``bytes1`` to ``bytes32`` because they are much cheaper. .. index:: ! ufixed, ! fixed, ! fixed point number Fixed Point Numbers ------------------- **COMING SOON...** .. index:: literal, literal;rational .. _rational_literals: Rational and Integer Literals ----------------------------- All number literals retain arbitrary precision until they are converted to a non-literal type (i.e. by using them together with a non-literal type). This means that computations do not overflow but also divisions do not truncate. For example, ``(2**800 + 1) - 2**800`` results in the constant ``1`` (of type ``uint8``) although intermediate results would not even fit the machine word size. Furthermore, ``.5 * 8`` results in the integer ``4`` (although non-integers were used in between). If the result is not an integer, an appropriate ``ufixed`` or ``fixed`` type is used whose number of fractional bits is as large as required (approximating the rational number in the worst case). In ``var x = 1/4;``, ``x`` will receive the type ``ufixed0x8`` while in ``var x = 1/3`` it will receive the type ``ufixed0x256`` because ``1/3`` is not finitely representable in binary and will thus be approximated. Any operator that can be applied to integers can also be applied to literal expressions as long as the operators are integers. If any of the two is fractional, bit operations are disallowed and exponentiation is disallowed if the exponent is fractional (because that might result in a non-rational number). .. note:: Most finite decimal fractions like ``5.3743`` are not finitely representable in binary. The correct type for ``5.3743`` is ``ufixed8x248`` because that allows to best approximate the number. If you want to use the number together with types like ``ufixed`` (i.e. ``ufixed128x128``), you have to explicitly specify the desired precision: ``x + ufixed(5.3743)``. .. warning:: Division on integer literals used to truncate in earlier versions, but it will now convert into a rational number, i.e. ``5 / 2`` is not equal to ``2``, but to ``2.5``. .. note:: Literal expressions are converted to a permanent type as soon as they are used with other expressions. Even though we know that the value of the expression assigned to ``b`` in the following example evaluates to an integer, it still uses fixed point types (and not rational number literals) in between and so the code does not compile :: uint128 a = 1; uint128 b = 2.5 + a + 0.5; .. index:: literal, literal;string, string String Literals --------------- String Literals are written with double quotes (``"abc"``). As with integer literals, their type can vary, but they are implicitly convertible to ``bytes`` if they fit, to ``bytes`` and to ``string``. .. index:: enum .. _enums: Enums ===== Enums are one way to create a user-defined type in Solidity. They are explicitly convertible to and from all integer types but implicit conversion is not allowed. :: contract test { enum ActionChoices { GoLeft, GoRight, GoStraight, SitStill } ActionChoices choice; ActionChoices constant defaultChoice = ActionChoices.GoStraight; function setGoStraight() { choice = ActionChoices.GoStraight; } // Since enum types are not part of the ABI, the signature of "getChoice" // will automatically be changed to "getChoice() returns (uint8)" // for all matters external to Solidity. The integer type used is just // large enough to hold all enum values, i.e. if you have more values, // `uint16` will be used and so on. function getChoice() returns (ActionChoices) { return choice; } function getDefaultChoice() returns (uint) { return uint(defaultChoice); } } .. index:: ! type;reference, ! reference type, storage, memory, location, array, struct Reference Types ================== Complex types, i.e. types which do not always fit into 256 bits have to be handled more carefully than the value-types we have already seen. Since copying them can be quite expensive, we have to think about whether we want them to be stored in **memory** (which is not persisting) or **storage** (where the state variables are held). Data location ------------- Every complex type, i.e. *arrays* and *structs*, has an additional annotation, the "data location", about whether it is stored in memory or in storage. Depending on the context, there is always a default, but it can be overridden by appending either ``storage`` or ``memory`` to the type. The default for function parameters (including return parameters) is ``memory``, the default for local variables is ``storage`` and the location is forced to ``storage`` for state variables (obviously). There is also a third data location, "calldata", which is a non-modifyable non-persistent area where function arguments are stored. Function parameters (not return parameters) of external functions are forced to "calldata" and it behaves mostly like memory. Data locations are important because they change how assignments behave: Assignments between storage and memory and also to a state variable (even from other state variables) always create an independent copy. Assignments to local storage variables only assign a reference though, and this reference always points to the state variable even if the latter is changed in the meantime. On the other hand, assignments from a memory stored reference type to another memory-stored reference type does not create a copy. :: contract C { uint[] x; // the data location of x is storage // the data location of memoryArray is memory function f(uint[] memoryArray) { x = memoryArray; // works, copies the whole array to storage var y = x; // works, assigns a pointer, data location of y is storage y[7]; // fine, returns the 8th element y.length = 2; // fine, modifies x through y delete x; // fine, clears the array, also modifies y // The following does not work; it would need to create a new temporary / // unnamed array in storage, but storage is "statically" allocated: // y = memoryArray; // This does not work either, since it would "reset" the pointer, but there // is no sensible location it could point to. // delete y; g(x); // calls g, handing over a reference to x h(x); // calls h and creates an independent, temporary copy in memory } function g(uint[] storage storageArray) internal {} function h(uint[] memoryArray) {} } Summary ^^^^^^^ Forced data location: - parameters (not return) of external functions: calldata - state variables: storage Default data location: - parameters (also return) of functions: memory - all other local variables: storage .. index:: ! array .. _arrays: Arrays ------ Arrays can have a compile-time fixed size or they can be dynamic. For storage arrays, the element type can be arbitrary (i.e. also other arrays, mappings or structs). For memory arrays, it cannot be a mapping and has to be an ABI type if it is an argument of a publicly-visible function. An array of fixed size ``k`` and element type ``T`` is written as ``T[k]``, an array of dynamic size as ``T[]``. As an example, an array of 5 dynamic arrays of ``uint`` is ``uint[][5]`` (note that the notation is reversed when compared to some other languages). To access the second uint in the third dynamic array, you use ``x[2][1]`` (indices are zero-based and access works in the opposite way of the declaration, i.e. ``x[2]`` shaves off one level in the type from the right). Variables of type ``bytes`` and ``string`` are special arrays. A ``bytes`` is similar to ``byte[]``, but it is packed tightly in calldata. ``string`` is equal to ``bytes`` but does not allow length or index access (for now). So ``bytes`` should always be preferred over ``byte[]`` because it is cheaper. .. note:: If you want to access the byte-representation of a string ``s``, use ``bytes(s).length / bytes(s)[7] = x';``. Keep in mind that you are accessing the low-level bytes of the utf-8 representation, and not the individual characters! .. index:: ! array;allocating, new Allocating Memory Arrays ^^^^^^^^^^^^^^^^^^^^^^^^ Creating arrays with variable length in memory can be done using the ``new`` keyword. As opposed to storage arrays, it is **not** possible to resize memory arrays by assigning to the ``.length`` member. :: contract C { function f(uint len) { uint[] memory a = new uint[](7); bytes memory b = new bytes(len); // Here we have a.length == 7 and b.length == len a[6] = 8; } } .. index:: ! array;length, length, push, !array;push Members ^^^^^^^ **length**: Arrays have a ``length`` member to hold their number of elements. Dynamic arrays can be resized in storage (not in memory) by changing the ``.length`` member. This does not happen automatically when attempting to access elements outside the current length. The size of memory arrays is fixed (but dynamic, i.e. it can depend on runtime parameters) once they are created. **push**: Dynamic storage arrays and ``bytes`` (not ``string``) have a member function called ``push`` that can be used to append an element at the end of the array. The function returns the new length. .. warning:: It is not yet possible to use arrays of arrays in external functions. .. warning:: Due to limitations of the EVM, it is not possible to return dynamic content from external function calls. The function ``f`` in ``contract C { function f() returns (uint[]) { ... } }`` will return something if called from web3.js, but not if called from Solidity. The only workaround for now is to use large statically-sized arrays. :: contract ArrayContract { uint[2**20] m_aLotOfIntegers; // Note that the following is not a pair of arrays but an array of pairs. bool[2][] m_pairsOfFlags; // newPairs is stored in memory - the default for function arguments function setAllFlagPairs(bool[2][] newPairs) { // assignment to a storage array replaces the complete array m_pairsOfFlags = newPairs; } function setFlagPair(uint index, bool flagA, bool flagB) { // access to a non-existing index will throw an exception m_pairsOfFlags[index][0] = flagA; m_pairsOfFlags[index][1] = flagB; } function changeFlagArraySize(uint newSize) { // if the new size is smaller, removed array elements will be cleared m_pairsOfFlags.length = newSize; } function clear() { // these clear the arrays completely delete m_pairsOfFlags; delete m_aLotOfIntegers; // identical effect here m_pairsOfFlags.length = 0; } bytes m_byteData; function byteArrays(bytes data) { // byte arrays ("bytes") are different as they are stored without padding, // but can be treated identical to "uint8[]" m_byteData = data; m_byteData.length += 7; m_byteData[3] = 8; delete m_byteData[2]; } function addFlag(bool[2] flag) returns (uint) { return m_pairsOfFlags.push(flag); } function createMemoryArray(uint size) returns (bytes) { // Dynamic memory arrays are created using `new`: uint[2][] memory arrayOfPairs = new uint[2][](size); // Create a dynamic byte array: bytes memory b = new bytes(200); for (uint i = 0; i < b.length; i++) b[i] = byte(i); return b; } } .. index:: ! struct, ! type;struct .. _structs: Structs ------- Solidity provides a way to define new types in the form of structs, which is shown in the following example: :: contract CrowdFunding { // Defines a new type with two fields. struct Funder { address addr; uint amount; } struct Campaign { address beneficiary; uint fundingGoal; uint numFunders; uint amount; mapping (uint => Funder) funders; } uint numCampaigns; mapping (uint => Campaign) campaigns; function newCampaign(address beneficiary, uint goal) returns (uint campaignID) { campaignID = numCampaigns++; // campaignID is return variable // Creates new struct and saves in storage. We leave out the mapping type. campaigns[campaignID] = Campaign(beneficiary, goal, 0, 0); } function contribute(uint campaignID) { Campaign c = campaigns[campaignID]; // Creates a new temporary memory struct, initialised with the given values // and copies it over to storage. // Note that you can also use Funder(msg.sender, msg.value) to initialise. c.funders[c.numFunders++] = Funder({addr: msg.sender, amount: msg.value}); c.amount += msg.value; } function checkGoalReached(uint campaignID) returns (bool reached) { Campaign c = campaigns[campaignID]; if (c.amount < c.fundingGoal) return false; c.beneficiary.send(c.amount); c.amount = 0; return true; } } The contract does not provide the full functionality of a crowdfunding contract, but it contains the basic concepts necessary to understand structs. Struct types can be used inside mappings and arrays and they can itself contain mappings and arrays. It is not possible for a struct to contain a member of its own type, although the struct itself can be the value type of a mapping member. This restriction is necessary, as the size of the struct has to be finite. Note how in all the functions, a struct type is assigned to a local variable (of the default storage data location). This does not copy the struct but only stores a reference so that assignments to members of the local variable actually write to the state. Of course, you can also directly access the members of the struct without assigning it to a local variable, as in ``campaigns[campaignID].amount = 0``. .. index:: !mapping Mappings ======== Mapping types are declared as ``mapping _KeyType => _ValueType``, where ``_KeyType`` can be almost any type except for a mapping and ``_ValueType`` can actually be any type, including mappings. Mappings can be seen as hashtables which are virtually initialized such that every possible key exists and is mapped to a value whose byte-representation is all zeros. The similarity ends here, though: The key data is not actually stored in a mapping, only its ``sha3`` hash used to look up the value. Because of this, mappings do not have a length or a concept of a key or value being "set". Mappings are only allowed for state variables (or as storage reference types in internal functions). .. index:: assignment, ! delete, lvalue Operators Involving LValues =========================== If ``a`` is an LValue (i.e. a variable or something that can be assigned to), the following operators are available as shorthands: ``a += e`` is equivalent to ``a = a + e``. The operators ``-=``, ``*=``, ``/=``, ``%=``, ``a |=``, ``&=`` and ``^=`` are defined accordingly. ``a++`` and ``a--`` are equivalent to ``a += 1`` / ``a -= 1`` but the expression itself still has the previous value of ``a``. In contrast, ``--a`` and ``++a`` have the same effect on ``a`` but return the value after the change. delete ------ ``delete a`` assigns the initial value for the type to ``a``. I.e. for integers it is equivalent to ``a = 0``, but it can also be used on arrays, where it assigns a dynamic array of length zero or a static array of the same length with all elements reset. For structs, it assigns a struct with all members reset. ``delete`` has no effect on whole mappings (as the keys of mappings may be arbitrary and are generally unknown). So if you delete a struct, it will reset all members that are not mappings and also recurse into the members unless they are mappings. However, individual keys and what they map to can be deleted. It is important to note that ``delete a`` really behaves like an assignment to ``a``, i.e. it stores a new object in ``a``. :: contract DeleteExample { uint data; uint[] dataArray; function f() { uint x = data; delete x; // sets x to 0, does not affect data delete data; // sets data to 0, does not affect x which still holds a copy uint[] y = dataArray; delete dataArray; // this sets dataArray.length to zero, but as uint[] is a complex object, also // y is affected which is an alias to the storage object // On the other hand: "delete y" is not valid, as assignments to local variables // referencing storage objects can only be made from existing storage objects. } } .. index:: ! type;conversion, ! cast Conversions between Elementary Types ==================================== Implicit Conversions -------------------- If an operator is applied to different types, the compiler tries to implicitly convert one of the operands to the type of the other (the same is true for assignments). In general, an implicit conversion between value-types is possible if it makes sense semantically and no information is lost: ``uint8`` is convertible to ``uint16`` and ``int128`` to ``int256``, but ``int8`` is not convertible to ``uint256`` (because ``uint256`` cannot hold e.g. ``-1``). Furthermore, unsigned integers can be converted to bytes of the same or larger size, but not vice-versa. Any type that can be converted to ``uint160`` can also be converted to ``address``. Explicit Conversions -------------------- If the compiler does not allow implicit conversion but you know what you are doing, an explicit type conversion is sometimes possible:: int8 y = -3; uint x = uint(y); At the end of this code snippet, ``x`` will have the value ``0xfffff..fd`` (64 hex characters), which is -3 in two's complement representation of 256 bits. If a type is explicitly converted to a smaller type, higher-order bits are cut off:: uint32 a = 0x12345678; uint16 b = uint16(a); // b will be 0x5678 now .. index:: ! type;deduction, ! var .. _type-deduction: Type Deduction ============== For convenience, it is not always necessary to explicitly specify the type of a variable, the compiler automatically infers it from the type of the first expression that is assigned to the variable:: uint20 x = 0x123; var y = x; Here, the type of ``y`` will be ``uint20``. Using ``var`` is not possible for function parameters or return parameters. .. warning:: The type is only deduced from the first assignment, so the loop in the following snippet is infinite, as ``i`` will have the type ``uint8`` and any value of this type is smaller than ``2000``. ``for (var i = 0; i < 2000; i++) { ... }``