From 9b2f64d7769515d85770f1693959a5e4664c94e3 Mon Sep 17 00:00:00 2001 From: "Jordan K. Hubbard" Date: Tue, 8 Aug 1995 22:09:07 +0000 Subject: The Python programming language. --- lang/python-devel/Makefile | 26 ++++ lang/python-devel/distinfo | 1 + lang/python-devel/files/Setup | 276 +++++++++++++++++++++++++++++++++++++++ lang/python-devel/files/patch-aa | 17 +++ lang/python-devel/pkg-comment | 1 + lang/python-devel/pkg-descr | 2 + lang/python-devel/pkg-plist | 2 + 7 files changed, 325 insertions(+) create mode 100644 lang/python-devel/Makefile create mode 100644 lang/python-devel/distinfo create mode 100644 lang/python-devel/files/Setup create mode 100644 lang/python-devel/files/patch-aa create mode 100644 lang/python-devel/pkg-comment create mode 100644 lang/python-devel/pkg-descr create mode 100644 lang/python-devel/pkg-plist (limited to 'lang/python-devel') diff --git a/lang/python-devel/Makefile b/lang/python-devel/Makefile new file mode 100644 index 000000000000..a8ea89a2cc8d --- /dev/null +++ b/lang/python-devel/Makefile @@ -0,0 +1,26 @@ +# New ports collection makefile for: python +# Version required: 1.2 +# Date created: 08 August 1995 +# Whom: jkh +# +# $Id$ +# + +DISTNAME= python1.2 +CATEGORIES+= languages +MASTER_SITES= ftp://www.python.org/pub/python/src/ + +MAINTAINER= jkh@FreeBSD.org +WRKSRC= ${WRKDIR}/Python-1.2 +HAS_CONFIGURE= yes + +LIB_DEPENDS= tcl\\.7\\.:${PORTSDIR}/lang/tcl \ + tk\\.3\\.:${PORTSDIR}/x11/tk + +post-configure: + cp ${FILESDIR}/Setup ${WRKSRC}/Modules + +pre-install: + cd ${WRKSRC}; ${MAKE} libinstall + +.include diff --git a/lang/python-devel/distinfo b/lang/python-devel/distinfo new file mode 100644 index 000000000000..c2ecc13bd8c1 --- /dev/null +++ b/lang/python-devel/distinfo @@ -0,0 +1 @@ +MD5 (python1.2.tar.gz) = f4a9c715b24c680ddfed9c5378ec09a0 diff --git a/lang/python-devel/files/Setup b/lang/python-devel/files/Setup new file mode 100644 index 000000000000..b840d2860e0d --- /dev/null +++ b/lang/python-devel/files/Setup @@ -0,0 +1,276 @@ +# The file Setup is used by the makesetup script to construct the files +# Makefile and config.c, from Makefile.pre and config.c.in, +# respectively. The file Setup itself is initially copied from +# Setup.in; once it exists it will not be overwritten, so you can edit +# Setup to your heart's content. Note that Makefile.pre is created +# from Makefile.pre.in by the toplevel configure script. + +# (VPATH notes: Setup and Makefile.pre are in the build directory, as +# are Makefile and config.c; the *.in files are in the source +# directory.) + +# Each line in this file describes one or more optional modules. +# Comment out lines to suppress modules. +# Lines have the following structure: +# +# ... [ ...] [ ...] [ ...] +# +# is anything ending in .c (.C, .cc, .c++ are C++ files) +# is anything starting with -I, -D, -U or -C +# is anything ending in .a or beginning with -l or -L +# is anything else but should be a valid Python +# identifier (letters, digits, underscores, beginning with non-digit) +# +# Lines can also have the form +# +# = +# +# which defines a Make variable definition inserted into Makefile.in +# +# Finally, if a line has the literal form +# +# *noconfig* +# +# (that is including the '*' and '*' !) then the following modules will +# not be included in the config.c file, nor in the list of objects to be +# added to the library archive, and their linker options won't be added +# to the linker options, but rules to create their .o files and their +# shared libraries will still be added to the Makefile, and their +# names will be collected in the Make variable SHAREDMODS. This is +# used to build modules as shared libraries. (They must be installed +# using "make sharedinstall".) + +# NOTE: As a standard policy, as many modules as can be supported by a +# platform should be present. The distribution comes with all modules +# enabled that are supported by most platforms and don't require you +# to ftp sources from elsewhere. + + +# Some special rules to define PYTHONPATH. +# Edit the definitions below to indicate which options you are using. +# Don't add any whitespace or comments! + +# Don't edit this (usually) +DESTLIB=$(prefix)/lib/python + +# Standard enabled (tests are always available) +TESTPATH=:$(DESTLIB)/test + +# Path for machine- or system-dependent modules (and shared libraries) +MACHDEPPATH=:$(DESTLIB)/$(MACHDEP) + +COREPYTHONPATH=.:$(DESTLIB)$(TESTPATH)$(MACHDEPPATH)$(STDWINPATH)$(TKPATH) +PYTHONPATH=$(COREPYTHONPATH) + + +# The modules listed here can't be built as shared libraries for +# various reasons; therefore they are listed here instead of in the +# normal order. + +# Some modules that are normally always on: + +posix posixmodule.c # posix (UNIX) system calls +signal signalmodule.c # signal(2) + +# The SGI specific GL module: + +#gl glmodule.c -lgl -lX11 # Graphics Library -- SGI only + +# Thread module -- works on selected systems only, e.g. SGI IRIX and +# on SunOS 5.x (SOLARIS) only. +# Note that you must have configured (and built!) Python with the +# --with-thread option passed to the configure script for this to work: + +#thread threadmodule.c + +# Uncommenting the following line tells makesetup that all following +# modules are to be built as shared libraries (see above for more +# detail): + +#*noconfig* + + +# Modules that should always be present (non UNIX dependent): + +array arraymodule.c # array objects +math mathmodule.c -lm # math library functions, e.g. sin() +parser parsermodule.c # raw interface to the Python parser +regex regexmodule.c regexpr.c # Regular expressions, GNU Emacs style +strop stropmodule.c # fast string operations implemented in C +struct structmodule.c # binary structure packing/unpacking +time timemodule.c # time operations and variables + + +# Modules with some UNIX dependencies -- on by default: +# (If you have a really backward UNIX, select and socket may not be +# supported...) + +fcntl fcntlmodule.c # fcntl(2) and ioctl(2) +pwd pwdmodule.c # pwd(3) +grp grpmodule.c # grp(3) +crypt cryptmodule.c -lcrypt # crypt(3); needs -lcrypt on some systems +select selectmodule.c # select(2); not on ancient System V +socket socketmodule.c # socket(2); not on ancient System V + + +# Some more UNIX dependent modules -- off by default, since these +# are not supported by all UNIX systems: + +dbm dbmmodule.c # dbm(3) may require -lndbm or similar +nis nismodule.c # Sun yellow pages -- not everywhere +termios termios.c # Steen Lumholt's termios module + + +# Multimedia modules -- on by default. +# These represent audio samples or images as strings: + +audioop audioop.c # Operations on audio samples +imageop imageop.c # Operations on images +rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably) + + +# The stdwin module provides a simple, portable (between X11 and Mac) +# windowing interface. You need to ftp the STDWIN library, e.g. from +# ftp://ftp.cwi.nl/pub/stdwin. (If you get it elsewhere, be sure to +# get version 1.0 or higher!) The STDWIN variable must point to the +# STDWIN toplevel directory. + +# Uncomment and edit as needed: +#STDWIN=/usr/ports/devel/stdwin/work/stdwin1.0 + +# Uncomment these lines: +#STDWINPATH=:$(DESTLIB)/stdwin +#LIBTEXTEDIT=$(STDWIN)/$(MACHDEP)/Packs/textedit/libtextedit.a +#LIBX11STDWIN=$(STDWIN)/$(MACHDEP)/Ports/x11/libstdwin.a +#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBX11STDWIN) -lX11 + +# Use this instead of the last two lines above for alphanumeric stdwin: +#LIBALFASTDWIN=$(STDWIN)/$(MACHDEP)/Ports/alfa/libstdwin.a +#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBALFASTDWIN) -ltermcap + + +# The md5 module implements the RSA Data Security, Inc. MD5 +# Message-Digest Algorithm, described in RFC 1321. The necessary files +# md5c.c and md5.h are included here. + +md5 md5module.c md5c.c + + +# The mpz module interfaces to the GNU Multiple Precision library. +# You need to ftp the GNU MP library. +# The GMP variable must point to the GMP source directory. +# This was originally written and tested against GMP 1.2. I have +# compiled it against GMP 1.3.2 (the latest I believe) and it seems to +# work OK, but I haven't tested it thoroughly (lacking knowledge about +# it). + +# A compatible MP library unencombered by the GPL also exists. It was +# posted to comp.sources.misc in volume 40 and is widely available from +# FTP archive sites. One URL for it is: +# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z + +#GMP=/ufs/guido/src/gmp +#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a + + +# SGI IRIX specific modules -- off by default. + +# These module work on any SGI machine: + +# *** gl must be enabled higher up in this file *** +#fm fmmodule.c -lfm -lgl # Font Manager +#sgi sgimodule.c # sgi.nap() and a few more + +# This module requires the header file +# /usr/people/4Dgifts/iristools/include/izoom.h: + +#imgfile imgfile.c -limage -lgutil -lm # Image Processing Utilities + + +# These modules require the Multimedia Development Option (I think): + +#al almodule.c -laudio # Audio Library +#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library +#cl clmodule.c -lcl -lawareaudio # Compression Library +#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video + + +# The FORMS library, by Mark Overmars, implements user interface +# components such as dialogs and buttons using SGI's GL and FM +# libraries. You must ftp the FORMS library separately from +# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a. +# The FORMS variable must point to the FORMS subdirectory of the forms +# toplevel directory: + +#FORMS=/ufs/guido/src/forms/FORMS +#fl flmodule.c -I$(FORMS) $(FORMS)/libforms.a -lfm -lgl + + +# SunOS specific modules -- off by default: + +#sunaudiodev sunaudiodev.c + + +# George Neville-Neil's timing module: + +#timing timingmodule.c + + +# Steen Lumholt's tkinter module. +# +# For use with plain Tk, use the first line. +# +# For use with extended Tk (i.e. if you have added extra widgets to +# the Tk library, such as the common "studButton" and "triButton" +# extensions), edit tkappinit.c, add appropriate -DWITH_... and +# libraries/objects to the second line, and use that. +# +# In all cases also enable the last line (TKPATH). +# +# This was designed to build with Tk 3.6 and Tcl 7.3, but also seems +# to work Tk 4.0 beta. (Tkinter.py hasn't been fixed though, so for +# the time being Tk 3.6 is the version of choice!) + +# *** Use ONE of the following two lines, see previous comments *** +tkinter tkintermodule.c -I/usr/local/include -I/usr/X11R6/include -L/usr/local/lib -L/usr/X11R6/lib -ltk -ltcl -lX11 +#tkinter tkintermodule.c tkappinit.c -DWITH_APPINIT -I/usr/local/include -L/usr/local/lib -ltk -ltcl -lX11 + +# *** ALWAYS use this line as well *** +TKPATH=:$(DESTLIB)/tkinter + + +# Lance Ellinghaus's modules: + +rotor rotormodule.c # enigma-inspired encryption +syslog syslogmodule.c # syslog daemon interface +curses cursesmodule.c -lncurses -ltermcap # guess what? + # (On Linux, try -lncurses) + + + +# Tommy Burnette's 'new' module (creates new empty objects of certain kinds): + +#new newmodule.c + + +# John Redford's sybase module (requires sybase): + +#sybase sybasemodule.c + + +# Generic (SunOS / SVR4) dynamic loading module. +# This is not needed for dynamic loading of Python modules -- +# it is a highly experimental and dangerous device for calling +# *arbitrary* C functions in *arbitrary* shared libraries: + +#dl dlmodule.c + + +# Anthony Baxter's gdbm module (derived from Jack's dbm module) +# GNU dbm(3) will require -lgdbm: + +#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm + + +# Example -- included for reference only: +# xx xxmodule.c diff --git a/lang/python-devel/files/patch-aa b/lang/python-devel/files/patch-aa new file mode 100644 index 000000000000..a57bbba6ffa6 --- /dev/null +++ b/lang/python-devel/files/patch-aa @@ -0,0 +1,17 @@ +diff -c -r Modules/cursesmodule.c.orig Modules/cursesmodule.c +*** Modules/cursesmodule.c.orig Fri Mar 17 04:18:36 1995 +--- Modules/cursesmodule.c Tue Aug 8 13:31:40 1995 +*************** +*** 145,151 **** +--- 145,155 ---- + + #include "Python.h" + ++ #ifdef __FreeBSD__ ++ #include ++ #else + #include ++ #endif + + typedef struct { + PyObject_HEAD diff --git a/lang/python-devel/pkg-comment b/lang/python-devel/pkg-comment new file mode 100644 index 000000000000..35436ed862ed --- /dev/null +++ b/lang/python-devel/pkg-comment @@ -0,0 +1 @@ +Python - an interpreted object-oriented programming language. diff --git a/lang/python-devel/pkg-descr b/lang/python-devel/pkg-descr new file mode 100644 index 000000000000..a2103f1521db --- /dev/null +++ b/lang/python-devel/pkg-descr @@ -0,0 +1,2 @@ +Python is an interpreted object-oriented programming language, and is +often compared to Tcl, Perl or Scheme. diff --git a/lang/python-devel/pkg-plist b/lang/python-devel/pkg-plist new file mode 100644 index 000000000000..5d3c2a4b3c27 --- /dev/null +++ b/lang/python-devel/pkg-plist @@ -0,0 +1,2 @@ +bin/python +lib/python -- cgit