## Tangerine

Official golang implementation of the Tangerine Newtork fullnode.

Tangerine implementation is based-on the [go-ethereum](https://github.com/ethereum/go-ethereum) project. The consensus layer is replaced with the [Tangerine consensus](https://github.com/tangerine-network/tangerine-consensus) implementation.

[![API Reference](
https://camo.githubusercontent.com/915b7be44ada53c290eb157634330494ebe3e30a/68747470733a2f2f676f646f632e6f72672f6769746875622e636f6d2f676f6c616e672f6764646f3f7374617475732e737667
)](https://godoc.org/github.com/tangerine-network/go-tangerine)
[![Go Report Card](https://goreportcard.com/badge/github.com/tangerine-network/go-tangerine)](https://goreportcard.com/report/github.com/tangerine-network/go-tangerine)

<!--
Automated builds are available for stable releases and the unstable master branch.
Binary archives are published at https://gtan.ethereum.org/downloads/.
-->

## Building the source

For prerequisites and detailed build instructions please read the
[Installation Instructions](https://tangerine-network.github.io/wiki/#/Building-Tangerine)
on the wiki.

Building gtan requires both a Go (version 1.10 or later) and a C compiler.
You can install them using your favourite package manager.
Once the dependencies are installed, run

    make gtan

or, to build the full suite of utilities:

    make all

## Executables

The go-tangerine project comes with several wrappers/executables found in the `cmd` directory.

| Command    | Description |
|:----------:|-------------|
| **`gtan`** | Our main Ethereum CLI client. It is the entry point into the Ethereum network (main-, test- or private net), capable of running as a full node (default), archive node (retaining all historical state) or a light node (retrieving data live). It can be used by other processes as a gateway into the Ethereum network via JSON RPC endpoints exposed on top of HTTP, WebSocket and/or IPC transports. `gtan --help`<!-- and the [CLI Wiki page](https://github.com/tangerine-network/go-tangerine/wiki/Command-Line-Options) for command line options -->. |
| `nodekey` | Utility to generate key pair for operating a node. |
| `abigen` | Source code generator to convert Ethereum contract definitions into easy to use, compile-time type-safe Go packages. It operates on plain [Contract ABIs](https://solidity.readthedocs.io/en/develop/abi-spec.html) with expanded functionality if the contract bytecode is also available. However it also accepts Solidity source files, making development much more streamlined. Please see our [Native DApps](https://tangerine-network.github.io/wiki/#/Dapp-Development-Guide) wiki page for details. |
| `bootnode` | Stripped down version of our Ethereum client implementation that only takes part in the network node discovery protocol, but does not run any of the higher level application protocols. It can be used as a lightweight bootstrap node to aid in finding peers in private networks. |
| `evm` | Developer utility version of the EVM (Ethereum Virtual Machine) that is capable of running bytecode snippets within a configurable environment and execution mode. Its purpose is to allow isolated, fine-grained debugging of EVM opcodes (e.g. `evm --code 60ff60ff --debug`). |
| `rlpdump` | Developer utility tool to convert binary RLP <!-- ([Recursive Length Prefix](https://github.com/ethereum/wiki/wiki/RLP)) --> dumps (data encoding used by the Tangerine protocol both network as well as consensus wise) to user friendlier hierarchical representation (e.g. `rlpdump --hex CE0183FFFFFFC4C304050583616263`). |

## Running gtan

Going through all the possible command line flags is out of scope here <!-- (please consult our
[CLI Wiki page](https://github.com/tangerine-network/go-tangerine/wiki/Command-Line-Options)) -->, but we've
enumerated a few common parameter combos to get you up to speed quickly on how you can run your
own Gtan instance.

### Full node on the main Tangerine network

By far the most common scenario is people wanting to simply interact with the DRXON network:
create accounts; transfer funds; deploy and interact with contracts. For this particular use-case
the user doesn't care about years-old historical data, so we can fast-sync quickly to the current
state of the network. To do so:

```
$ gtan console
```

This command will:

 * Start gtan in fast sync mode (default, can be changed with the `--syncmode` flag), causing it to
   download more data in exchange for avoiding processing the entire history of the Ethereum network,
   which is very CPU intensive.
 * Start up Geth's built-in interactive JavaScript console [JavaScript console](https://github.com/ethereum/go-ethereum/wiki/JavaScript-Console),
   (via the trailing `console` subcommand) through which you can invoke all official [`web3` methods](https://tangerine-network.github.io/wiki/#/JSON-RPC-API?id=javascript-api)
   as well as Gtan's own [management APIs](https://github.com/ethereum/go-ethereum/wiki/Management-APIs)
   This tool is optional and if you leave it out you can always attach to an already running Geth instance
   with `gtan attach`.

### Full node on the Tangerine test network

Transitioning towards developers, if you'd like to play around with creating Tangerine contracts, you
almost certainly would like to do that without any real money involved until you get the hang of the
entire system. In other words, instead of attaching to the main network, you want to join the **test**
network with your node, which is fully equivalent to the main network, but with play-TAN only.

```
$ gtan --testnet console
```

The `console` subcommand have the exact same meaning as above and they are equally useful on the
testnet too. Please see above for their explanations if you've skipped to here.

Specifying the `--testnet` flag however will reconfigure your Gtan instance a bit:

 * Instead of using the default data directory (`~/.tangerine` on Linux for example), Gtan will nest
   itself one level deeper into a `testnet` subfolder (`~/.tangerine/testnet` on Linux). Note, on OSX
   and Linux this also means that attaching to a running testnet node requires the use of a custom
   endpoint since `gtan attach` will try to attach to a production node endpoint by default. E.g.
   `gtan attach <datadir>/testnet/gtan.ipc`. Windows users are not affected by this.
 * Instead of connecting the main Tangerine network, the client will connect to the test network,
   which uses different P2P bootnodes, different network IDs and genesis states.

*Note: Although there are some internal protective measures to prevent transactions from crossing
over between the main network and test network, you should make sure to always use separate accounts
for play-money and real-money. Unless you manually move accounts, Gtan will by default correctly
separate the two networks and will not make any accounts available between them.*

### Configuration

As an alternative to passing the numerous flags to the `gtan` binary, you can also pass a configuration file via:

```
$ gtan --config /path/to/your_config.toml
```

To get an idea how the file should look like you can use the `dumpconfig` subcommand to export your existing configuration:

```
$ gtan --your-favourite-flags dumpconfig
```

*Note: This works only with gtan v1.6.0 and above.*

#### Docker quick start

One of the quickest ways to get Tangerine up and running on your machine is by using Docker:

```
docker run -d --name tangerine-node -v /Users/bob/tangerine:/root \
           -p 8545:8545 -p 30303:30303 \
           byzantinelab/go-tangerine
```

This will start gtan in fast-sync mode with a DB memory allowance of 1GB just as the above command does. It will also create a persistent volume in your home directory for saving your blockchain as well as map the default ports. There is also an `alpine` tag available for a slim version of the image.

Do not forget `--rpcaddr 0.0.0.0`, if you want to access RPC from other containers and/or hosts. By default, `gtan` binds to the local interface and RPC endpoints is not accessible from the outside.
-->

### Programatically interfacing Gtan nodes

As a developer, sooner rather than later you'll want to start interacting with Gtan and the Tangerine
network via your own programs and not manually through the console. To aid this, Gtan has built-in
support for a JSON-RPC based APIs which are ethereum-compatible ([standard APIs](https://github.com/ethereum/wiki/wiki/JSON-RPC) and
[Gtan specific APIs](https://github.com/ethereum/go-ethereum/wiki/Management-APIs)). These can be
exposed via HTTP, WebSockets and IPC (unix sockets on unix based platforms, and named pipes on Windows).

The IPC interface is enabled by default and exposes all the APIs supported by Gtan, whereas the HTTP
and WS interfaces need to manually be enabled and only expose a subset of APIs due to security reasons.
These can be turned on/off and configured as you'd expect.

HTTP based JSON-RPC API options:

  * `--rpc` Enable the HTTP-RPC server
  * `--rpcaddr` HTTP-RPC server listening interface (default: "localhost")
  * `--rpcport` HTTP-RPC server listening port (default: 8545)
  * `--rpcapi` API's offered over the HTTP-RPC interface (default: "eth,net,web3")
  * `--rpccorsdomain` Comma separated list of domains from which to accept cross origin requests (browser enforced)
  * `--ws` Enable the WS-RPC server
  * `--wsaddr` WS-RPC server listening interface (default: "localhost")
  * `--wsport` WS-RPC server listening port (default: 8546)
  * `--wsapi` API's offered over the WS-RPC interface (default: "eth,net,web3")
  * `--wsorigins` Origins from which to accept websockets requests
  * `--ipcdisable` Disable the IPC-RPC server
  * `--ipcapi` API's offered over the IPC-RPC interface (default: "admin,debug,eth,miner,net,personal,shh,txpool,web3")
  * `--ipcpath` Filename for IPC socket/pipe within the datadir (explicit paths escape it)

You'll need to use your own programming environments' capabilities (libraries, tools, etc) to connect
via HTTP, WS or IPC to a Geth node configured with the above flags and you'll need to speak [JSON-RPC](https://www.jsonrpc.org/specification)
on all transports. You can reuse the same connection for multiple requests!

**Note: Please understand the security implications of opening up an HTTP/WS based transport before
doing so! Hackers on the internet are actively trying to subvert Ethereum nodes with exposed APIs!
Further, all browser tabs can access locally running webservers, so malicious webpages could try to
subvert locally available APIs!**

<!--
### Operating a private network

Maintaining your own private network is more involved as a lot of configurations taken for granted in
the official networks need to be manually set up.

#### Defining the private genesis state

First, you'll need to create the genesis state of your networks, which all nodes need to be aware of
and agree upon. This consists of a small JSON file (e.g. call it `genesis.json`):

```json
{
  "config": {
        "chainId": 0,
        "homesteadBlock": 0,
        "eip155Block": 0,
        "eip158Block": 0
    },
  "alloc"      : {},
  "coinbase"   : "0x0000000000000000000000000000000000000000",
  "difficulty" : "0x20000",
  "extraData"  : "",
  "gasLimit"   : "0x2fefd8",
  "nonce"      : "0x0000000000000042",
  "mixhash"    : "0x0000000000000000000000000000000000000000000000000000000000000000",
  "parentHash" : "0x0000000000000000000000000000000000000000000000000000000000000000",
  "timestamp"  : "0x00"
}
```

The above fields should be fine for most purposes, although we'd recommend changing the `nonce` to
some random value so you prevent unknown remote nodes from being able to connect to you. If you'd
like to pre-fund some accounts for easier testing, you can populate the `alloc` field with account
configs:

```json
"alloc": {
  "0x0000000000000000000000000000000000000001": {"balance": "111111111"},
  "0x0000000000000000000000000000000000000002": {"balance": "222222222"}
}
```

With the genesis state defined in the above JSON file, you'll need to initialize **every** Geth node
with it prior to starting it up to ensure all blockchain parameters are correctly set:

```
$ gtan init path/to/genesis.json
```

#### Creating the rendezvous point

With all nodes that you want to run initialized to the desired genesis state, you'll need to start a
bootstrap node that others can use to find each other in your network and/or over the internet. The
clean way is to configure and run a dedicated bootnode:

```
$ bootnode --genkey=boot.key
$ bootnode --nodekey=boot.key
```

With the bootnode online, it will display an [`enode` URL](https://github.com/ethereum/wiki/wiki/enode-url-format)
that other nodes can use to connect to it and exchange peer information. Make sure to replace the
displayed IP address information (most probably `[::]`) with your externally accessible IP to get the
actual `enode` URL.

*Note: You could also use a full fledged Geth node as a bootnode, but it's the less recommended way.*

#### Starting up your member nodes

With the bootnode operational and externally reachable (you can try `telnet <ip> <port>` to ensure
it's indeed reachable), start every subsequent Geth node pointed to the bootnode for peer discovery
via the `--bootnodes` flag. It will probably also be desirable to keep the data directory of your
private network separated, so do also specify a custom `--datadir` flag.

```
$ gtan --datadir=path/to/custom/data/folder --bootnodes=<bootnode-enode-url-from-above>
```

*Note: Since your network will be completely cut off from the main and test networks, you'll also
need to configure a miner to process transactions and create new blocks for you.*
-->

## Contribution

Thank you for considering to help out with the source code! We welcome contributions from
anyone on the internet, and are grateful for even the smallest of fixes!

If you'd like to contribute to go-tangerine, please fork, fix, commit and send a pull request
for the maintainers to review and merge into the main code base. If you wish to submit more
complex changes though, please check up with the core devs first on [our gitter channel](https://gitter.im/TangerineNetwork/lobby)
to ensure those changes are in line with the general philosophy of the project and/or get some
early feedback which can make both your efforts much lighter as well as our review and merge
procedures quick and simple.

Please make sure your contributions adhere to our coding guidelines:

 * Code must adhere to the official Go [formatting](https://golang.org/doc/effective_go.html#formatting) guidelines (i.e. uses [gofmt](https://golang.org/cmd/gofmt/)).
 * Code must be documented adhering to the official Go [commentary](https://golang.org/doc/effective_go.html#commentary) guidelines.
 * Pull requests need to be based on and opened against the `dev` branch.
 * Commit messages should be prefixed with the package(s) they modify.
   * E.g. "eth, rpc: make trace configs optional"

Please see the [Developers' Guide](https://github.com/tangerine-network/go-tangerine/wiki/Developers'-Guide)
for more details on configuring your environment, managing project dependencies and testing procedures.

## License

The go-tangerine repository is forked from dexon-foundation/dexon, which is forked as well
from ethereum/go-ethereum. Thus, it inherits the licensing terms from upstream go-ethereum license:

The go-tangerine library (i.e. all code outside of the `cmd` directory) is licensed under the
[GNU Lesser General Public License v3.0](https://www.gnu.org/licenses/lgpl-3.0.en.html), also
included in our repository in the `COPYING.LESSER` file.

The go-tangeirne binaries (i.e. all code inside of the `cmd` directory) is licensed under the
[GNU General Public License v3.0](https://www.gnu.org/licenses/gpl-3.0.en.html), also included
in our repository in the `COPYING` file.