See e_book_listener_check_queue below.

2001-09-08  Jon Trowbridge  <trow@ximian.com>

	* backend/ebook/e-book-view-listener.c
	(e_book_view_listener_check_queue): See
	e_book_listener_check_queue below.
	(e_book_view_listener_queue_response): See
	e_book_listener_queue_response below.

	* backend/ebook/e-book-listener.c (e_book_listener_check_queue):
	Explicitly prohibit reentrancy.  Use gtk-unref rather than
	bobobo-unref.
	(e_book_listener_queue_response): Hold a gtk-ref to the listener
	while the idle function runs, not a bonobo-ref.  As far as I can
	tell, it is impossible to avoid a race condition here when we have
	to worry about bonobo reentrancy.

	* gui/component/select-names/e-select-names-text-model.c
	(e_select_names_text_model_insert_length): Alter a copy of the
	original EDestination, rather than just using a new one.  We need
	to do this to preserve prior-card information for possible
	reversion later.
	(e_select_names_text_model_delete): Ditto.

	* backend/ebook/e-destination.c (e_destination_clear_card): When
	clearing a destination where ->card != NULL, store it for possible
	reversion later.
	(e_destination_revert): If we have an old card stored, go back to
	using it for the destination.
	(e_destination_is_valid): Tries to detect obviously broken
	addresses.
	(e_destination_cardify): If our destination is invalid, first try
	to cardify simply by reverting to an older card.
	(e_destination_destroy): Unref any cached old card.
	(e_destination_copy): Copy the old card information.

2001-09-07  Jon Trowbridge  <trow@ximian.com>

	* gui/component/select-names/e-select-names.c
	(sync_table_and_models): Show all rows in the table, and then
	remove the rows that correspond to entries in the
	ESelectNamesModels in the children.
	(real_add_address): Freeze/thaw our ESelectNamesModel, so that we
	don't change our table while we are in the middle of iterating
	over the selection.
	(remove_address): Just delete the address from the
	ESelectNamesModel, the signal handler will do the rest.
	(selected_rows_foreach_cb): Call remove_address to do our dirty
	work.
	(e_select_names_add_section): Connect to the 'changed' signal from
	the ESelectNamesModel, and call sync_table_and_models explicitly to
	get our initial state correct.

	* gui/component/select-names/e-select-names-table-model.c
	(fill_in_info): Deal with EDestinations in our table that don't
	come from cards.

	* gui/component/select-names/e-select-names-manager.c: Added
	another ESelectNamesModel* to the ESelectNamesManagerSection
	struct.  Called 'original_model', this contains a copy of the
	model as it is when we begin using the SelectNames dialog.
	(section_copy): Copy the original model.
	(section_free): Free the original model.
	(e_select_names_manager_add_section_with_limit): Initialize the
	original model.
	(e_select_names_clicked): I've changed the semantics of this
	dialog quite a bit... no UI freeze can stop me!  If OK is clicked,
	we do nothing.  If Cancel is clicked, we revert to the
	'original_model' copy of our address entry state before we started
	editting.  Finally, we close the dialog before any of thing. Doing
	it last caused problems, because signals were being triggered
	which had dangling pointers as their closures.
	(e_select_names_manager_activate_dialog): Copy our current state
	to the original model, and share the same ESelectNamesModel
	between the dialog and the address entry in the composer..
	(e_select_names_manager_get_cards): Removed.  It had been
	#if 0/#endif-ed out for a while.

	* gui/component/select-names/e-select-names-model.c
	(e_select_names_model_freeze): Added.
	(e_select_names_model_thaw): Added.
	(e_select_names_model_uncardify): Added.  If possible,
	"uncardifies" a specific model entry.
	(e_select_names_model_changed): Changed to pay attention
	to the freeze count.

	* gui/component/select-names/e-select-names-completion.c
	(clean_query_text): Strip leading/trailing whitespace from
	queries.

	* backend/ebook/e-destination.c (e_destination_uncardify): Added.
	Converts a card-associated destination into a text-associated
	destination w/ the e-mail address.
	(e_destination_list_to_vector): Added.  A convenience routine.
	(e_destination_freev): Added.  A convenience routine.
	(e_destination_touchv): Added.  I'm lazy.

svn path=/trunk/; revision=12708

1 files changed, 97 insertions, 0 deletions

diff --git a/addressbook/ChangeLog b/addressbook/ChangeLog
index 0ea44d6521..067be8e1e2 100644
--- a/addressbook/ChangeLog
+++ b/addressbook/ChangeLog
@@ -1,3 +1,99 @@
+2001-09-08  Jon Trowbridge  <trow@ximian.com>
+
+	* backend/ebook/e-book-view-listener.c
+	(e_book_view_listener_check_queue): See
+	e_book_listener_check_queue below.
+	(e_book_view_listener_queue_response): See
+	e_book_listener_queue_response below.
+
+	* backend/ebook/e-book-listener.c (e_book_listener_check_queue):
+	Explicitly prohibit reentrancy.  Use gtk-unref rather than
+	bobobo-unref.
+	(e_book_listener_queue_response): Hold a gtk-ref to the listener
+	while the idle function runs, not a bonobo-ref.  As far as I can
+	tell, it is impossible to avoid a race condition here when we have
+	to worry about bonobo reentrancy.
+
+	* gui/component/select-names/e-select-names-text-model.c
+	(e_select_names_text_model_insert_length): Alter a copy of the
+	original EDestination, rather than just using a new one.  We need
+	to do this to preserve prior-card information for possible
+	reversion later.
+	(e_select_names_text_model_delete): Ditto.
+
+	* backend/ebook/e-destination.c (e_destination_clear_card): When
+	clearing a destination where ->card != NULL, store it for possible
+	reversion later.
+	(e_destination_revert): If we have an old card stored, go back to
+	using it for the destination.
+	(e_destination_is_valid): Tries to detect obviously broken
+	addresses.
+	(e_destination_cardify): If our destination is invalid, first try
+	to cardify simply by reverting to an older card.
+	(e_destination_destroy): Unref any cached old card.
+	(e_destination_copy): Copy the old card information.
+
+2001-09-07  Jon Trowbridge  <trow@ximian.com>
+
+	* gui/component/select-names/e-select-names.c
+	(sync_table_and_models): Show all rows in the table, and then
+	remove the rows that correspond to entries in the
+	ESelectNamesModels in the children.
+	(real_add_address): Freeze/thaw our ESelectNamesModel, so that we
+	don't change our table while we are in the middle of iterating
+	over the selection.
+	(remove_address): Just delete the address from the
+	ESelectNamesModel, the signal handler will do the rest.
+	(selected_rows_foreach_cb): Call remove_address to do our dirty
+	work.
+	(e_select_names_add_section): Connect to the 'changed' signal from
+	the ESelectNamesModel, and call sync_table_and_models explicitly to
+	get our initial state correct.
+
+	* gui/component/select-names/e-select-names-table-model.c
+	(fill_in_info): Deal with EDestinations in our table that don't
+	come from cards.
+
+	* gui/component/select-names/e-select-names-manager.c: Added
+	another ESelectNamesModel* to the ESelectNamesManagerSection
+	struct.  Called 'original_model', this contains a copy of the
+	model as it is when we begin using the SelectNames dialog.
+	(section_copy): Copy the original model.
+	(section_free): Free the original model.
+	(e_select_names_manager_add_section_with_limit): Initialize the
+	original model.
+	(e_select_names_clicked): I've changed the semantics of this
+	dialog quite a bit... no UI freeze can stop me!  If OK is clicked,
+	we do nothing.  If Cancel is clicked, we revert to the
+	'original_model' copy of our address entry state before we started
+	editting.  Finally, we close the dialog before any of thing. Doing
+	it last caused problems, because signals were being triggered
+	which had dangling pointers as their closures.
+	(e_select_names_manager_activate_dialog): Copy our current state
+	to the original model, and share the same ESelectNamesModel
+	between the dialog and the address entry in the composer..
+	(e_select_names_manager_get_cards): Removed.  It had been
+	#if 0/#endif-ed out for a while.
+
+	* gui/component/select-names/e-select-names-model.c
+	(e_select_names_model_freeze): Added.
+	(e_select_names_model_thaw): Added.
+	(e_select_names_model_uncardify): Added.  If possible,
+	"uncardifies" a specific model entry.
+	(e_select_names_model_changed): Changed to pay attention
+	to the freeze count.
+
+	* gui/component/select-names/e-select-names-completion.c
+	(clean_query_text): Strip leading/trailing whitespace from
+	queries.
+
+	* backend/ebook/e-destination.c (e_destination_uncardify): Added.
+	Converts a card-associated destination into a text-associated
+	destination w/ the e-mail address.
+	(e_destination_list_to_vector): Added.  A convenience routine.
+	(e_destination_freev): Added.  A convenience routine.
+	(e_destination_touchv): Added.  I'm lazy.
+
 2001-09-08  Chris Toshok  <toshok@ximian.com>
 
 	(make_contact_editor_cb): show the right contact editor (the list
@@ -32,6 +128,7 @@
 	* gui/component/addressbook-component.c: Removed unused factory
 	variable.
 
+>>>>>>> 1.757
 2001-09-06  Chris Toshok  <toshok@ximian.com>
 
 	* gui/component/addressbook-storage.c (notify_listener): new