Adding files to help translating evolution guide using a .po way

Adding initial release of the spanish translation of evolution guide.

svn path=/trunk/; revision=8671

1 files changed, 1526 insertions, 0 deletions

diff --git a/help/es/usage-mail.sgml b/help/es/usage-mail.sgml
new file mode 100644
index 0000000000..e1e02327fc
--- /dev/null
+++ b/help/es/usage-mail.sgml
@@ -0,0 +1,1526 @@
+<!--
+<!DOCTYPE Chapter PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN">
+-->
+
+<chapter id="usage-mail"> 
+  <title>Correo en Evolution</title>
+  <abstract>
+    <title> Una Vista General del Correo en Evolution</title>
+    <para>
+       <application>Evolution</application> email is like other email
+       programs in all the ways you would hope:
+     <itemizedlist>
+       <listitem>
+	 <para>
+	   It can sort and organize your mail in a wide variety of ways with
+	   folders, searches, and filters.
+	 </para>
+       </listitem>
+       <listitem>
+	 <para>
+	  It can send and receive mail in HTML or as plain text, and
+	  permits multiple file attachments.
+	 </para>
+       </listitem>
+       <listitem>
+	 <para>
+	   It supports multiple mail sources, including <glossterm
+	   linkend="imap">IMAP</glossterm>, <glossterm
+	   linkend="pop">POP3</glossterm>, local
+	   <systemitem><filename>mbox</filename></systemitem> and
+	   <systemitem><filename>mh</filename></systemitem> files, and
+	   even NNTP messages (newsgroups), which aren't technically
+	   email.
+	 </para>
+       </listitem>
+     </itemizedlist>
+    </para>
+    <para>
+      However, <application>Evolution</application> has some important
+      differences.  First, it's built to handle very large amounts of
+      mail without slowing down or crashing.  Both the <link
+      linkend="usage-mail-organize-filters">filtering</link> and <link
+      linkend="usage-mail-organize-search">searching</link> functions
+      were built for speed and efficiency on gargantuan volumes of
+      mail. There's also the <application>Evolution</application>
+      <link linkend="usage-mail-organize-vFolders">Virtual
+      Folder</link>, an advanced organizational feature not found in
+      other mail clients.  If you get a lot of mail, or if you keep
+      every message you get in case you need to refer to it later,
+      you'll find this feature especially useful.
+    </para>
+  </abstract>
+
+  <sect1 id="usage-mail-getnsend">
+    <title>Leyendo, Obteniendo y Enviando Correo</title>
+
+    <sect2 id="usage-mail-getnsend-read">
+      <title>Leyendo el Correo</title>
+      <para>
+       You can start reading email by clicking
+       <guibutton>Inbox</guibutton> in the shortcut bar. The first
+       time you use <application>Evolution</application>, it will
+       start with the <interface>Inbox</interface> open and show you a
+       message from Ximian welcoming you to the application.
+      </para>
+      <para>
+	Your <application>Evolution</application>
+	<guilabel>Inbox</guilabel> will look something like the one in
+	<xref linkend="usage-mail-intro-fig">. Just below the toolbar
+	is the <interface>message list</interface>, showing message
+	header information like <guilabel>Subject</guilabel> and
+	<guilabel>Date</guilabel>.  The message itself appears below
+	that, in the <interface>view pane</interface>.  If you find
+	the <interface>view pane</interface> too small, you can resize
+	the pane, enlarge the whole window, or double-click on the
+	message in the <interface>message list</interface> to have it
+	open in a new window.  Just like with folders, you can
+	right-click on messages in the message list and get a menu of
+	possible actions.
+     </para>
+
+ <!-- ==============Figure=================================== -->
+ 
+      <figure id="usage-mail-intro-fig">
+	  <title>Correo de Evolution</title>
+	  <screenshot>
+	    <screeninfo>Inbox</screeninfo>
+	    <graphic fileref="fig/mail-pic" format="png" srccredit="Aaron Weber">
+	</graphic>
+	</screenshot>
+      </figure>
+<!-- ==============End of Figure============================== -->
+
+      <para>
+         Most of the mail-related actions you'll want to perform are
+         listed in the <guimenu>Message</guimenu> menu in the menu
+         bar.  The most frequently used ones, like
+         <guimenuitem>Reply</guimenuitem> and
+         <guimenuitem>Forward</guimenuitem>, also appear as buttons in
+         the toolbar, and almost all of them are duplicated in the
+         right-click menu and as keyboard shortcuts, which tend to be
+         faster once you get the hang of them.  You can choose
+         whichever way you like best; the idea is that the software
+         should work the way you want, rather than making you work the
+         way the it does.
+	 <tip id="view-headers">
+	 <title>Take a look at the headers</title>
+	 <para>
+	 To look at the entire source of your email message, including
+	 all the header information, select
+	 <menuchoice><guimenu>View</guimenu><guimenuitem>Source</guimenuitem></menuchoice>
+	 </para>
+	 </tip>
+       </para>
+
+      <sect3 id="usage-mail-listorder">
+	<title>Ordenando la lista de mensajes</title>
+	<para>
+          One of the ways <application>Evolution</application> lets
+          you choose the way you work is the way it lets you sort your
+          message lists.  To sort by sender, subject, or date, click
+          on the bars with those labels at the top of the message
+          list. The direction of the arrow next to the label indicates
+          the direction of the sort, and if you click again, you'll
+          sort them in reverse order. For example, click once on
+          <guilabel>Date</guilabel> to sort messages by date from
+          oldest to newest.  Click again, and
+          <application>Evolution</application> sorts the list from
+          newest to oldest. You can also right-click on the message
+          header bars to get a set of sorting options, and add or
+          remove columns from the message list.  You can find detailed
+          instructions on how to customize your message display
+          columns in <xref linkend="usage-mail-organize-columns">.
+        </para>
+	<para>
+          You can also choose a threaded message view. Select
+          <menuchoice> <guimenu>View</guimenu>
+          <guimenuitem>Threaded</guimenuitem> </menuchoice> to turn
+          the threaded view on or off.  When you select this option,
+          <application>Evolution</application> groups the replies to a
+          message with the original, so you can follow the thread of a
+          conversation from one message to the next.
+        </para>
+      </sect3>
+      <sect3 id="usage-mail-getnsend-delete">
+        <title>Borrando Correo</title>
+        <para>
+          Once you've read your mail, you may want to get rid of
+          it. To mark a message for deletion, select it in the the
+          <interface>message list</interface> by clicking on it once.
+          Then click on the <guibutton>Delete</guibutton> button in
+          the tool bar. Or, right-click on a message and choose
+          <guimenuitem>Delete</guimenuitem> from the right-click
+          menu. The message will appear with a line through it, to
+          show that you've marked it for deletion.
+        </para>
+        <para>
+          If you change your mind and decide you want to keep it,
+          select <menuchoice> <guimenu>Message</guimenu>
+          <guimenuitem>Undelete</guimenuitem></menuchoice>.  If you
+          really want to get rid of it, choose
+          <guimenuitem>Expunge</guimenuitem> from the
+          <guimenu>Folder</guimenu> menu.  That will delete it
+          permanently.
+        </para>
+      </sect3>
+    </sect2>
+
+    <sect2 id="usage-mail-getnsend-get">
+      <title>Comprobando el Correo</title>
+      <para>
+	Now that you've had a look around the
+	<interface>Inbox</interface>, it's time to check for new mail.
+	Click <guibutton>Get mail</guibutton> in the toolbar to check
+	your mail.  If it's the first time you've done so, the
+	<interface>mail setup assistant</interface> will ask you for
+	the information it needs to check your mail (see <xref
+	linkend="config-setupassist"> for more information). 
+     </para>
+     <para>
+        Then, you need to enter your email
+        password. <application>Evolution</application> will remember
+        your password until until you select <menuchoice>
+        <guimenu>Settings</guimenu> <guimenuitem>Forget
+        Passwords</guimenuitem> </menuchoice>.
+      </para>
+      <para>
+        Once it's validated the password,
+	<application>Evolution</application> will check your mail.
+	New mail will appear in the local <interface>Inbox</interface>
+	if you're using a <glossterm>POP</glossterm> account, and in
+	your <glossterm>IMAP</glossterm> folders if you use IMAP.  If
+	you have chosen to use IMAP, and you have multiple folders on
+	your IMAP server, you may need to subscribe to them.  To learn
+	how to use the subscription manager, read <xref
+	linkend="usage-mail-subscriptions">.
+      </para>
+   
+     <note id="badmailsettings">
+     <title>¿No Puede Leer su Correo?</title> 
+     <para>
+	If you get an error message instead of mail, you probably need
+	to change your network settings.  To learn how to do that,
+	have a look at <xref linkend="config-prefs-mail-network">, or
+	ask your system administrator.
+      </para>
+    </note>
+
+      <sect3 id="usage-mail-getnsend-get-news">
+         <title>Usando Evolution para las Noticias </title>
+       <para>
+         Newsgroups are so similar to email that there's no reason not
+         to read them side by side.  If you want to do that, add a
+         news source to your configuration (see <xref
+         linkend="config-prefs-network-news">). The news server will
+         appear as a remote server, and will look quite similar to an
+         IMAP folder.  When you click <guibutton>Get Mail</guibutton>,
+         <application>Evolution</application> will also check for news
+         messages.
+       </para>
+       </sect3>
+
+      <sect3 id="usage-mail-getnsend-get-attach">
+	<title>Adjuntos y correo en HTML</title>
+	<para>
+	  Si alguien le envía un <glossterm>adjunto</glossterm>, un
+	  archivo adjunto aun mensaje,
+	  <application>Evolution</application> mostrará en archivo en la
+	  parte de abajo del mensaje al que está adjuntado.  Texto,
+	  HTML, y la mayoría de imágenes se mostrarán dentro del mensaje.
+	  Para otros archivos,
+	  <application>Evolution</application> mostrará un icono al final
+	  del mensaje.  Pulse con el botón derecho sobre el icono para obtener
+	  una lista de opciones que variarán dependiendo del tipo de adjunto.
+	  Tendrá la opción de mostrar la mayoría de los archivos como parte del
+	  mensaje, exportarlos a otra aplicación (imágenes a Eye of GNOME, hojas
+	  de cálculo a Gnumeric, y así sucesivamente), o guardarlo en el disco.
+        </para>
+
+	<para>
+	   <application>Evolution</application> tambien puede mostrar
+	   correo formateado en HTML, completo con gráficos.  El formateado
+	   en HTML se mostrará automaticamente, aunque puede deshabilitarlo
+	   si lo prefiere.
+	</para>
+      </sect3>
+    </sect2>
+
+    <sect2 id="usage-mail-getnsend-send">
+      <title>Escribiendo y Enviando Correo</title>
+      <para>
+	 You can start writing a new email message by selecting
+	 <menuchoice> <guimenu>File</guimenu>
+	 <guisubmenu>New</guisubmenu> <guimenuitem>
+	 Mail Message</guimenuitem></menuchoice>, or by pressing the
+	 <guibutton>Compose</guibutton> button in the Inbox toolbar.
+	 When you do so, the <interface>New Message</interface> window
+	 will open, as shown in <xref
+	 linkend="usage-mail-newmsg-fig">.
+      </para>
+
+<!--   ==============Figure=================================== -->
+      <figure id="usage-mail-newmsg-fig">
+	<title>Ventana de Nuevo Mensaje</title>
+	<screenshot>
+	  <screeninfo>Evolution Main Window</screeninfo>
+	  <graphic fileref="fig/newmsg-pic" format="png" srccredit="Kevin Breit">
+	</graphic>
+	</screenshot>
+      </figure>
+<!-- ==============End of Figure=================================== -->
+
+ <!-- Check the alignment of the following paragraph in the PS and
+ HTML output: it's indented for no good reason -->
+      <para>
+	 Enter an address in the <guilabel>To:</guilabel> field, a
+	 subject in the <guilabel>Subject:</guilabel> and a message in
+	 the big empty box at the bottom of the window, and press
+	 <guibutton>Send</guibutton>.
+       </para>
+
+      <sect3 id="usage-mail-getnsend-send-delay">
+	<title>Guardando Mensajes para más tarde</title>
+	<para>
+	   Evolution enviará el mensaje inmediatamente a menos que le diga lo
+	   contrario seleccionando <menuchoice>
+	   <guimenu>Archivo</guimenu> <guimenuitem>Enviar más
+	   Tarde</guimenuitem></menuchoice>.  Esto añadirá sus mensajes
+	   a la cola de <guilabel>Outbox</guilabel>.  Esntonces,
+	   cuando pulse <guibutton>Enviar</guibutton> en otro
+	   mensaje, u <guibutton>Obtener</guibutton> en la ventana principal
+	   del correo, todos los mensajes no enviados se enviarán en ese momento.
+	   Me gusta usar "Enviar más Tarde" porque me permite tener la oportunidad
+	   de cambiar de opinión acerca de un mensaje antes de enviarlo.  De esa forma
+	   no envio nada de lo que me arrepentiré al día siguiente.
+	</para>
+	   Para aprender más acerca de como puede especificar el comportamiento de
+	   la cola de mensajes y de los filtros, vea <xref linkend="config-prefs-mail">.
+	</para>
+
+	<para>
+           You can also choose to save messages as drafts or as text
+           files.  Choose
+           <menuchoice>
+             <guimenu>File</guimenu>
+             <guimenuitem>Save</guimenuitem>
+	  </menuchoice>
+          or <guimenuitem>Save As</guimenuitem> to save your message
+          as a text file. If you prefer to keep your message in a
+          folder (the <guilabel>Drafts</guilabel> folder would be the
+          obvious place), you can select <menuchoice>
+          <guimenu>File</guimenu> <guimenuitem>Save In
+          Folder</guimenuitem> </menuchoice>. 
+        </para>
+      </sect3>
+      <sect3 id="usage-mail-getnsend-send-compose">
+        <title>Composición Avanzada de Correo</title>
+        <para>
+	  You can probably guess the purpose of the buttons labelled
+	  <guibutton>Cut</guibutton>, <guibutton>Copy</guibutton>,
+	  <guibutton>Paste</guibutton>, <guibutton>Undo</guibutton>
+	  and <guibutton>Redo</guibutton>, but there's a bit more to
+	  sending mail that's less obvious.  In the next few sections,
+	  you'll see how <application>Evolution</application> handles
+	  additional features, including large recipient lists,
+	  attachments, and forwarding.
+        </para>
+      <sect4 id="usage-mail-getnsend-send-attach">
+	<title>Adjuntos</title>
+	<para>
+	    Si quiere adjuntar un archivo a su mensaje de correo, puede
+	    arrastrarlo desde su escritorio hasta la ventana del mensaje, o
+	    pulsar el botón con un clip de la barra de herramientas,
+	    con el título <guibutton>Adjuntar</guibutton>.  Si presiona el
+	    botón <guibutton>Adjuntar</guibutton>,
+	    <application>Evolution</application> abrirá una ventana de selección
+	    de archivos para preguntarle que archivo quiere enviar.
+	    Seleccione el archivo y pulse <guilabel>Aceptar</guilabel>.
+        </para>
+	<para>
+            To hide the display of files you've attached to the
+            message, select <menuchoice>
+            <guimenu>View</guimenu> <guimenuitem>Hide
+            Attachments</guimenuitem> </menuchoice>; to show them
+            again, choose <guimenuitem>Show Attachments</guimenuitem>.
+        </para>
+	<para>
+            When you send the message, a copy of the attached file
+	    will go with it.  Be aware that big attachments can take a
+	    long time to download.
+          </para>
+	</sect4>
+        <sect4 id="usage-mail-getnsend-send-to-types">
+         <title>Tipos de Destinatarios</title>
+        <para>
+	    <application>Evolution</application>, como la mayoría de
+	    los programas de correo reconoce tres tipos de direcciones
+	    destinatarios principales, destinatarios secundarios, y
+	    destinatarios escondidos ("oculto").
+         </para>
+         <para>
+	    La manera más simple de dirigir un mensaje es poner la dirección
+           o direcciones de correo en el campo <guilabel>A:</guilabel>,
+           el cual denota a los destinatarios principales.  Para enviar
+           correo a más de una o dos personas, puede usar el campo
+            <guilabel>Cc:</guilabel>.
+	  </para>
+	  <para>
+	    Volviendo la vista a las edades oscuras cuando la gente usaba máquinas
+	    de escribir y no habia fotocopiadoras, "Cc" significa
+	    "Copia de Carbón".  Uselo cuando quiera compartir un mensaje que ha
+	    escrito a otra persona.
+	    <example id="ex-mail-cc">
+	      <title>Usando el campo Cc:</title>
+	      <para>
+	         Cuando Susan envia un mensaje a un cliente, pone a su compañero,
+	         Tim, en el campo <guilabel>Cc:</guilabel>, para que sepa como van
+	         las cosas.  El cliente puede ver que Tim también recivió el
+	         mensaje, y sabe que también puede hablar con Tim acerca del
+	         mensaje.
+	      </para>
+	    </example>
+	  </para>
+	  <para>
+	    Si tiene un gran número de destinatarios, o si quiere mandar mensajes
+	    a varias personas sin mostrar la lista de destinatarios, debe usar
+	    <guilabel>Cco:</guilabel>. "Cco" significa "Con Copia Oculta",
+	    y envía los mensajes discretamente.  En otras palabras,
+	    las personas en el campo <guilabel>Cco:</guilabel> reciven el mensaje,
+	    pero nadie vee que lo recibieron.  Note que el contenido de los campos
+	    <guilabel>A:</guilabel> y <guilabel>Cc:</guilabel> son visibles para
+	    todos los destinatarios, incluso para las personas en la lista
+	    <guilabel>Cco:</guilabel>.
+
+	    <example id="ex-mail-bcc">
+	      <title>Usando el campo Cco:</title>
+	      <para>
+	         Tim está enviando un anuncio por correo a todos los clientes
+	         de su compañía, algunos de los cuales son competidores entre si,
+	         y todos ellos valoran su privacidad. En este caso necesita usar
+	         el campo <guilabel>Cco:</guilabel>.  Si pone todas las
+	         direcciones de su agenda de direcciones de "Clientes" en el
+	         campo <guilabel>A:</guilabel> o en el campo
+	         <guilabel>Cc:</guilabel>, hara que <emphasis>toda</emphasis>
+	         la lista de clientes de la compañía sea pública.
+	         Parece una pequeña diferencia, pero en ocasiones puede tener
+	         una gran importancia.
+	     </para>
+	    </example>
+	  </para>
+	</sect4>
+
+        <sect4 id="usage-mail-getnsend-send-to">
+	<title>Eligiendo Rápidamente a los Destinatarios</title>
+	<para>
+	  Si ha creado tarjetas de direcciones en el administrador de contactos,
+	  puede escribir apodos o otras porciones de los datos de la dirección, y
+	  <application>Evolution</application> completará la dirección por usted
+	  <!-- (INSERTAR descripción de la IU para esta caracteristica,
+	  una vez que se decida). --> Si escribe un nombre oun apodo
+	  puede coincidir con más de una tarjeta, Evolution abrirá una ventana de
+	  diálogo y le preguntará a quien se refiere.
+	  <!-- (TODAVIA NO) Tambien, <application>Evolution</application>
+	  añadirá un dominio a cualquier direccion incompleta.  Por defecto, será
+	  su dominio, pero puede elegirlo en el diálogo de preferencias del
+	  correo. -->
+          </para>
+	  <para>
+            Alternativamente, puede pulsar en los botones
+            <guibutton>A:</guibutton>, <guibutton>Cc:</guibutton>, o
+            <guibutton>Cco:</guibutton> para obtener una lista &mdash;
+            potencialmente muy larga &mdash; de las direcciones de correo
+            de su administrador de contactos.  Seleccione las direcciones y
+            pulse sobre las flechas para moverlas a la columna de direcciones
+            apropiada.
+          </para>
+	  <para>
+            Para más información acerca de usar el correo junto con el
+	    administrador de contactos y el calendario, vea <xref
+	    linkend="usage-contact-automate"> y <xref
+	    linkend="usage-calendar-apts">.
+	  </para>
+        </sect4>
+      </sect3>
+      
+      <sect3 id="usage-mail-getnsend-send-reply">
+	<title>Respondiendo Mensajes</title>
+	<para>
+	   Para resonder a un mensaje, pulse el botón
+	   <guibutton>Responder</guibutton> mientras está seleccionado,
+	   o elija <guimenuitem>Responder al Remitente</guimenuitem> del menu
+	   del botón derecho del mensaje.  Esto abrirá el
+	   <interface>compositor de mensajes</interface>.  Los campos
+	   <guilabel>A:</guilabel> y <guilabel>Asunto</guilabel>
+	   ya estarán escritos, aunque puede alterarlos si lo desea.
+	   Ademas, el texto completo del antiguo mensaje es insertado en el
+	   nuevo mensaje, bien sea con itálicas (para vista en HTML) o con el
+	   caracter &gt; precediendo cada línea (en modo texto plano), para
+	   indicar que es parte del mensaje previo.  Habitualmente la gente
+	   escribe su mensaje intercalado con el mensaje anterior, como se
+	   muestra en <xref linkend="usage-mail-getnsend-reply-fig">.
+
+<!-- note que esta imagen debe tener un mensaje de respuesta listo para ser
+enviado con partes quoteadas y las respuestas relevante intercaladas-->
+ <!-- ==============Imagen=================================== -->
+       <figure id="usage-mail-getnsend-reply-fig">
+	 <title>Ventana de Respuesta de Mensajes</title>
+	 <screenshot>
+	  <screeninfo>Ventana Principal de Evolution</screeninfo>
+	  <graphic fileref="fig/replymsg" format="png" srccredit="Aaron Weber">
+	</graphic>
+	</screenshot>
+      </figure>
+<!-- ==============Fin de la Imagen=================================== -->
+	</para>
+
+	<para>
+	  If you're reading a message with several recipients, you may
+	   wish to use <guibutton>Reply to All</guibutton> instead of
+	   <guibutton>Reply</guibutton>.  If there are large numbers
+	   of people in the <guilabel>Cc:</guilabel> or
+	   <guilabel>To:</guilabel> fields, this can save substantial
+	   amounts of time. 
+	  <example>
+	    <title>Using the Reply to All feature</title>
+	    <para>
+	      Susan sends an email to a client and sends copies to Tim
+	      and to an internal company mailing list of co-workers.
+	      If Tim wants to make a comment for all of them to read,
+	      he uses <guibutton>Reply to All</guibutton>, but if he
+	      just wants to tell Susan that he agrees with her, he
+	      uses <guibutton>Reply</guibutton>.  Note that his reply
+	      will not reach anyone that Susan put on her
+	      <guilabel>Bcc</guilabel> list, since that list is not
+	      shared with anyone.
+	    </para>
+	  </example>
+	</para>
+      </sect3>
+      <sect3 id="usage-mail-getnsend-send-find">
+        <title>Searching and Replacing with the Composer</title>
+	<para>
+           You're probably familiar with search and replace features,
+           and if you come from a Linux or Unix background, you
+           probably know what <guimenuitem>Find Regex</guimenuitem>
+           does.  If you aren't among the lucky who already know,
+           here's a quick rundown of an important section of the
+           <guimenu>Edit</guimenu> menu.
+        </para>
+	<para>
+           <variablelist>
+	    <varlistentry>
+	      <term><guimenuitem>Find</guimenuitem></term>
+	      <listitem><para> Enter a word or phrase, and
+	      <application>Evolution</application> will find it
+              in your message.
+	      </para></listitem>
+	    </varlistentry>
+	    
+	    <varlistentry>
+	      <term><guimenuitem>Find Regex</guimenuitem></term>
+	      <listitem>
+		<para>
+                  Find a regex, also called a
+                  <glossterm linkend="regular-expression">regular
+                  expression</glossterm>, in your composer window.
+               </para>
+             </listitem>
+	    </varlistentry>
+
+	    <varlistentry>
+	      <term><guimenuitem>Find Again</guimenuitem></term>
+	      <listitem><para>
+                   Select this item to repeat the last search you performed.
+              </para></listitem>
+	    </varlistentry>
+
+	    <varlistentry>
+	       <term><guimenuitem>Replace</guimenuitem></term>
+	       <listitem><para> 
+                 Find a word or phrase, and replace it with
+	         something else.  
+               </para></listitem>
+	    </varlistentry>
+
+	  </variablelist>
+        </para>  
+	<para>
+            For all of these menu items, you can choose whether or not
+            to <guilabel>Search Backwards</guilabel> in the document
+            from the point where your cursor is.  For all but the
+            regular expression search (which doesn't need it), you are
+            offered a check box to determine whether the search is to
+            be <guilabel>Case Sensitive</guilabel> when it determines
+            a match.
+        </para>
+      </sect3>
+      <sect3 id="usage-mail-getnsend-send-html">
+	<title>Embelleciendo su correo con HTML</title>
+	<para>
+            Normally, you can't set text styles or insert pictures in
+            emails, which is why you've probably seen people use far
+            too many exclamation points for emphasis, or use
+            <glossterm linkend="emoticon">emoticons</glossterm> to
+            convey their feelings.  However, most newer email programs
+            can display images and text styles as well as basic
+            alignment and paragraph formatting. They do this with
+            <glossterm linkend="html">HTML</glossterm>, just like web
+            pages do.
+        </para>
+	<note>
+	  <title>El correo con HTML no está seleccionado por defecto</title>
+	  <para>
+	    Algunas personas no tienen clientes con capacidad para mostrar HMTL, o
+	    prefieren no recibir mensajes con HTML porque tarda más en descargar
+	    y en ser mostrado.  <emphasis>Algunas</emphasis> personas se hablan
+	    correo con HTML como "la raíz de todos los males" y se enfadan
+	    mucho si les envia correo con HTML, por lo cual
+	    <application>Evolution</application> envía texto plano a menos que
+	    pida explicitamente HTML.  Para enviar correo con HTML, necesitará
+	    seleccionar <menuchoice> <guimenu>Formato</guimenu>
+	    <guimenuitem>HTML</guimenuitem></menuchoice>.
+	    Alternativamente, puede elegir el formato por defecto de sus mensajes
+	    en el diálogo de configuración del correo.
+	    Vea <xref linkend="config-prefs-mail-other"> para más información.
+          </para>
+	</note>
+	<para>
+           HTML formatting tools are located in the toolbar just above
+	   the space where you'll actually compose the message, and
+	   they also appear in the <guimenu>Insert</guimenu> and
+	   <guimenu>Format</guimenu> menus.  
+	  </para>
+	  <para>
+            Los iconos de la barra de herramientas estan explicados en <glossterm
+            linkend="tooltip">Mensajes de Ayuda</glossterm>, los cuales aparecen
+            cuando detiene el ratón sobre los botónes.  Los botones entran en cuatro
+            categorías:
+            <variablelist>
+             <varlistentry>
+             <term>Cabeceras y listas</term>
+	      <listitem>
+		<para>
+                  En el lado izquierdo de la barra de herramientas, puede elegir entre
+                  <guilabel>Normal</guilabel> para un estilo de texto por defecto
+                  o <guilabel>Cabecera 1</guilabel> a
+                  <guilabel>Cabecera 6</guilabel> para variar los tamaños de las
+                  cabeceras desde grande (1) hasta pequeño (6). Otros estilos
+                  incluyen <guilabel>pre</guilabel>, para usar etiquetas HTML
+                  para preformatear los bloques de texto, y tres tipos de
+                  <guilabel>Elementos de Lista</guilabel> para los más
+                  organizados.
+                </para>
+	      </listitem>
+           </varlistentry>
+           <varlistentry>
+             <term>Estilo del texto</term>
+	      <listitem>
+		<para>
+                  Use estos botones para determinar el aspecto de sus cartas.
+                  Si tiene un texto seleccionado, el estilo se aplicará al texto
+                  seleccionado.  Si no tiene texto seleccionado el estilo se
+                  aplicará a lo siguiente que escriba.  Los botones son:
+                  <itemizedlist mark="none">      
+		  <listitem><para>Presione <guibutton>B</guibutton> para texto en negrita</para></listitem>   
+                  <listitem><para>Presione <guibutton>I</guibutton> para itálicas</para></listitem>
+		  <listitem><para>Presione <guibutton>U</guibutton> para subrayado</para></listitem>
+		  <listitem><para>Presione <guibutton>S</guibutton> para tachado.</para></listitem>
+                 </itemizedlist>
+               </para>               
+	      </listitem>    
+	    </varlistentry>
+	    <varlistentry>
+	      <term>Alineación</term>
+	      <listitem>
+		<para>
+                   Localizado al lado de los botones de estilo del texto, estos tres
+                   iconos de párrafo deberian ser familiares para aquellos usuarios de
+                   la mayoría de los procesadores de texto.  El botón más a la izquierda
+                   hará que su texto se alinee a la izquierda, el botón central, lo
+                   centrará, y el botón a la derecha, lo alinerá al lado derecho.
+                </para>
+	      </listitem>
+	      </varlistentry>
+
+	    <varlistentry>
+	      <term>Reglas de indentación</term>
+	      <listitem>
+		<para>
+                  El botón con la flecha hacia la izquierda reducirá
+                  la indentación de un párrafo, y la flecha a la derecha
+                  incrementará su indentación.
+               </para>
+	    </listitem>
+	  </varlistentry>
+
+	    <varlistentry>
+	      <term>Selección de colores</term>
+	      <listitem>
+		<para>
+                  En la parte derecha esta la herramienta de selección de color.
+                  La caja coloreada muestra el color actual del texto. Para
+                  elegir uno nuevo, pulse el botón con la flecha justo a su derecha.
+                  Si tiene texto seleccionado, el color será aplicado al texto
+                  seleccionado.  Si no tiene texto seleccionado, el color será aplicado
+                  a lo que escriba a continuación.
+               </para>
+	    </listitem>
+	  </varlistentry>
+
+
+	  </variablelist>
+        </para>
+	<para>
+           There are three tools that you can find only in the
+           <guimenu>Insert</guimenu> menu.
+           <variablelist>
+             <varlistentry>
+               <term><guimenuitem>Insert Link</guimenuitem>:</term>
+	       <listitem>
+	        <para>
+                  Use this tool to put hyperlinks in your HTML
+                  messages.  When you select it,
+                  <application>Evolution</application> will prompt you
+                  for the <guilabel>Text</guilabel> that will appear,
+                  and the <guilabel>Link</guilabel>, where you should
+                  enter the actual web address (URL). If you don't
+                  want special link text, you can just enter the address
+                  directly, and <application>Evolution</application>
+                  will recognize it as a link.
+               </para>
+	    </listitem>
+          </varlistentry>
+          <varlistentry>
+            <term> <guimenuitem>Insert Image</guimenuitem>:</term>
+	    <listitem>
+	      <para>
+               Select this item to embed an image into your email, as
+               was done in the welcome message.  Images will appear at
+               the location of the cursor. This is different from
+               attaching them to a message, but not very different.
+              </para>
+	    </listitem>
+           </varlistentry>
+          <varlistentry>
+             <term><guimenuitem>Insert Rule</guimenuitem>:</term>
+             <listitem><para>
+               This will insert a horizontal line, or rule, into your document.
+               You'll be presented with a dialog box which gives you
+               the choice of size, percentage of screen, shading, and
+               alignment; if you leave everything at the default
+               values you'll get a thin black rule all the way across
+               the screen.</para></listitem>
+	</varlistentry>
+
+	  </variablelist>
+          </para>
+	  <note>
+	    <title>Una nota Técnica sobre las Etiquetas HTML</title>
+	    <para>
+	      El compositor de correo en un editor WYSIWYG (What You See Is What
+	      You Get "Lo Que Ve Es Lo Que Obtiene") de HTML. Esto significa que
+	      si escribe directamente HTML en el editor&mdash; digamos, 
+	      <markup role="html">&lt;B&gt;Bold Text&lt;/B&gt</markup>, el
+	      editor asumirá que quiere escribir exactamente esa cada de
+	      caracteres, y no "hacer poner texto en Negrita," como haría una
+	      herramienta de composición de HTML o un editor de texto.
+	    </para>
+	</note>
+      </sect3>
+   
+
+<!-- Function not implemented, 
+possibly never will be due to security evil. -->
+<!--
+	<sect3 id="usage-mail-getnsend-send-live">
+	  <title>Live Documents</title>
+	  <para>
+	    Later versions of <application>Evolution</application>
+	    will allow you to enliven your email with almost any
+	    sort of document, and even with entire
+	    applications. At this point, however, this feature has not 
+	    yet been implemented.
+	  </para>
+	</sect3>
+-->
+
+      <sect3 id="usage-mail-getnsend-fwd">
+	<title>Reenviando Correo</title>      
+	<para>
+	  The post office forwards your mail for you when you change
+	  addresses, and you can forward mail when you get a letter by
+	  mistake.  The email <guilabel>Forward</guilabel> button
+	  works in much the same way.  It's particularly useful if you
+	  have received a message and you think someone else would
+	  like to see it.  You can forward a message as an attachment
+	  to a new message (this is the default) or
+	  you can send it <glossterm linkend="inline">inline</glossterm> as a quoted
+	  portion of the message you are sending.  Attachment
+	  forwarding is best if you want to send the full, unaltered
+	  message on to someone else.  Inline forwarding is best if
+	  you want to send portions of a message, or if you have a
+	  large number of comments on different sections of the
+	  message you are forwarding.  Remember to note from whom the
+	  message came, and where, if at all, you have removed or
+	  altered content.
+	</para>
+	<para>
+	  To forward a message you are reading, press
+	  <guibutton>Forward</guibutton> on the toolbar, or select
+	  <menuchoice> <guimenu>Message</guimenu>
+	  <guimenuitem>Forward</guimenuitem> </menuchoice>.  If you
+	  prefer to forward the message <glossterm linkend="inline">inline</glossterm>
+	  instead of attached, select <menuchoice>
+	  <guimenu>Message</guimenu> <guimenuitem>Forward
+	  Inline</guimenuitem> </menuchoice> from the menu.  Choose an
+	  addressee as you would when sending a new message; the
+	  subject will already be entered, but you can alter it.
+	  Enter your comments on the message in the
+	  <interface>composition frame</interface>, and press
+	  <guibutton>Send</guibutton>.
+	</para>
+      </sect3>
+      <sect3 id="usage-mail-getnsend-ettiquette">
+	<title>Siete Consejos de Cortesía en el Correo</title>
+	<para>
+	  Comenze con diez, pero cuatro eran "No envie
+	  <glossterm linkend="spam">spam</glossterm>."
+	  <itemizedlist>
+
+	    <listitem>
+	      <para>
+		 No envie spam ni reenvie cartas encadenadas.  Si debe hacerlo,
+		 tenga cuidado con los timos y las leyendas urbanas, y asegurese
+		 que el mensaje no tiene múltiples capas de signos mayor que, (&gt;)
+		 indicando multiples capas de reenvios desconsiderados.
+	      </para>
+	    </listitem>
+
+	    <listitem>
+	      <para>
+		Siempre comienze y acabe con un saludo. Diga "por favor"
+		y "gracias", tal como hace en la vida real. Puede mantener
+		su cortesía excasa, pero ¡sea cortes!
+	      </para>
+	    </listitem>
+
+	    <listitem>
+	      <para>
+		¡TODO EN MAYUSCULAS SIGNIFICA QUE ESTÁ GRITANDO! No escriba todo el
+		mensaje en mayusculas.  Hace daño a los oidos de la gente.
+	      </para>
+	    </listitem>
+
+	    <listitem>
+	      <para>
+		 Nunca escriba en un mensaje electrónico nada que no diría en público.
+		 Los mensajes antiguos tienen la mala costumbre de reaparecer cuando
+		 menos se lo espera.
+	      </para>
+	    </listitem>
+
+	    <listitem>
+	      <para>
+	       Compruebe su ortografía y use frases completas.
+	      </para>
+	    </listitem>
+
+	    <listitem>
+	      <para>
+		No envie mensajes desagradebles (broncas).  Si recive uno,
+		no lo conteste.
+	      </para>
+	    </listitem>
+
+	    <listitem>
+	      <para>
+		 Cuando responde o reenvía, incluya justo lo suficiente del mensaje
+		 anterior para tener un contexto: no incluya demasiado,
+		 ni demasiado poco.
+	       </para>
+	    </listitem>
+	  </itemizedlist>
+	</para>
+	<para> ¡Feliz envío de correo! </para>
+      </sect3>
+    </sect2>
+  </sect1>
+
+  <sect1 id="usage-mail-organize">
+    <title>Organizando Su Correo</title>
+    <para>
+      Even if you only get a few email messages a day, you probably
+      want to sort and organize them.  When you get a hundred a day
+      and you want to refer to a message you received six weeks ago,
+      you <emphasis>need</emphasis> to sort and organize them.
+      Fortunately, <application>Evolution</application> has the tools
+      to help you do it.
+    </para>
+    <sect2 id="usage-mail-organize-columns">
+      <title>Ordenando el Correo según las Columnas</title>
+      <para>
+         By default, the message list has columns with the following
+         headings: an envelope icon indicating whether you have read
+         or replied to a message (closed for unread, open for read,
+         and open with an arrow on it to indicate you've sent a
+         reply), an exclamation point indicating priority, and the
+         <guilabel>From</guilabel>, <guilabel>Subject</guilabel>, and
+         <guilabel>Date</guilabel> fields. You can change their order
+         and remove them by dragging and dropping them.  You can add
+         new ones with the <guimenuitem>Field Chooser</guimenuitem>
+         item in the right click menu for the column headings.
+      </para>
+      <para>
+         Right-click on one of the column headers to get a list of
+         options:
+             <variablelist>
+
+               <varlistentry>
+                  <term><guimenuitem>Sort Ascending</guimenuitem>,
+                  <guimenuitem>Sort Descending</guimenuitem>, and
+                  <guimenuitem>Unsort</guimenuitem></term>
+                  <listitem><para>Which should be pretty obvious. You
+                  can also set these sorts by just clicking on the
+                  column headers.</para></listitem>
+               </varlistentry>
+
+              <varlistentry>
+                  <term><guimenuitem>Group By this Field</guimenuitem></term>
+                  <listitem><para>
+                     Groups messages instead of sorting them. (FIXME: Explain further) 
+                  </para></listitem>
+               </varlistentry>
+
+              <varlistentry>
+                  <term><guimenuitem>Remove this
+                  Column</guimenuitem></term> <listitem><para> Remove
+                  this column from the display. You can also remove
+                  columns by dragging the header off the list and
+                  letting it drop.  </para></listitem>
+               </varlistentry>
+
+              <varlistentry>
+                  <term><guimenuitem>Field
+                  Chooser</guimenuitem></term> <listitem><para> A list
+                  of column headers; just drag and drop them into
+                  place between two existing headers. A red arrow will
+                  appear to show you where you're about to put the
+                  column.  </para></listitem>
+               </varlistentry>
+            </variablelist>
+      </para>
+    </sect2>
+
+    <sect2 id="usage-mail-organize-folders">
+      <title>Estar Organizando con Carpetas</title>
+      <para>
+	<application>Evolution</application> keeps mail, as well as
+	address cards and calendars, in folders.  You start out with a
+	few, like <guilabel>Inbox</guilabel>,
+	<guilabel>Outbox</guilabel>, and <guilabel>Drafts</guilabel>,
+	but you can create as many as you like.  Create new folders by
+	selecting <guisubmenu>New</guisubmenu> and then
+	<guimenuitem>Folder</guimenuitem> from the
+	<guimenu>File</guimenu> menu.
+	<application>Evolution</application> will as you for the name
+	and the type of the folder, and will provide you with a folder
+	tree so you can pick where it goes.
+      </para>
+      <para>
+        When you click <guibutton>OK</guibutton>, your new folder will
+	appear in the <interface>folder view</interface>.  You can
+	then put messages in it by dragging and dropping them, or by
+	using the <guibutton>Move</guibutton> button in the
+	toolbar. If you want to move several messages at once, click
+	on the ones you want to move while holding down the
+	<keycap>CTRL</keycap> key, or use <keycap>Shift</keycap> to
+	select a range of messages.  If you create a filter with the
+	<interface>filter assistant</interface>, you can have mail
+	moved to your folder automatically.
+      </para>
+        </sect2>    
+
+    <sect2 id="usage-mail-organize-search">
+      <title>Buscando Mensajes</title>
+      <para>
+	Most mail clients can search through your messages for you,
+	but <application>Evolution</application> does it faster. You
+	can search through just the message subjects, just the message
+	body, or both body and subject.
+      </para>
+      <para>
+	To start searching, enter a word or phrase in the text area
+	right below the toolbar, and choose a search type:
+	<variablelist>
+	  <varlistentry>
+	    <term><guilabel>Body or subject contains:</guilabel></term>
+	  <listitem>
+	      <para>
+	        This will search message subjects and the messages
+	        themselves for the word or phrase you've entered in
+	        the search field.
+   	      </para>
+	    </listitem>
+	  </varlistentry>
+	  <varlistentry>
+	    <term> <guilabel>Body contains:</guilabel> </term>
+	    <listitem>
+	      <para>
+	        This will search only in message text, not the subject
+	        lines.
+	      </para>
+	    </listitem>
+	  </varlistentry>
+	  <varlistentry>
+	    <term><guilabel>Subject contains:</guilabel></term>
+	    <listitem>
+	      <para>
+	        This will show you messages where the search text is
+	        in the subject line.  It will not search in the
+	        message body.
+	      </para>
+	    </listitem>
+	  </varlistentry>
+	  <varlistentry>
+	    <term><guilabel>Body does not contain:</guilabel></term>
+	    <listitem>
+	      <para>
+	        This finds every email message that does not have the
+	        search text in the message body.  It will still show
+	        messages that have the search text in the subject
+	        line, if it is not also in the body.
+	      </para>
+	    </listitem>
+	  </varlistentry>
+	  <varlistentry>
+	    <term><guilabel>Subject does not contain:</guilabel></term>
+	    <listitem>
+	      <para>
+	        This finds every mail whose subject does not contain
+	        the search text.
+	      </para>
+	    </listitem>
+	  </varlistentry>
+	</variablelist>
+
+        When you've entered your search phrase, press
+        <keycap>Enter</keycap>.  <application>Evolution</application>
+        will show your search results in the message list.
+      </para>
+
+      <para>
+         If you think you'll want to return to a search again, you can
+         save it as a virtual folder by selecting <guilabel>Store
+         Search as Virtual Folder</guilabel>.
+      </para>
+
+      <para>
+         When you're done with the search, go back to seeing all your
+         messages by choosing <guimenuitem>Show All</guimenuitem> from
+         the <guilabel>Search</guilabel> drop-down box. If you're
+         sneaky, just enter a blank search: since every message has at
+         least one space in it, you'll see every message in the
+         folder.
+      </para>
+
+      <para>
+        If you'd like to perform a more complex search, open the
+        advanced search dialog by selecting
+        <guilabel>Advanced...</guilabel> from the
+        <guilabel>Search</guilabel> drop-down menu.  Then, create your
+        search criteria (each with the same options you saw in the
+        regular search bar), and decide whether you want to find
+        messages that match all of them, or messages that match even
+        one. Then, click <guibutton>Search</guibutton> to go and find
+        those messages.
+     </para>
+
+     <para>
+        You'll see a similar approach to sorting messages when you
+        create filters and virtual folders in the next few sections.
+     </para>
+
+    </sect2>
+
+    <sect2 id="usage-mail-organize-filters">
+      <title>Estar organizado: Filtros de correo en Evolution</title>
+      <para>
+        I once worked in the mail room of a large company, where my
+        job was to bundle, sort, and distribute mail to the various
+        mail boxes and desks throughout the building.  Filters do that
+        same job with email, but they lose much less mail than I did.
+        In addition, you can have multiple filters performing multiple
+        actions that may effect the same message in several ways.  For
+        example, your filters could put copies of one message into
+        multiple folders, or keep a copy and send one to another
+        person as well, and it can do that in under a second. Which is
+        to say, it's faster and more flexible than an actual person
+        with a pile of envelopes.
+      </para>
+      <para>
+        Most often, you'll want to have
+        <application>Evolution</application> put mail into different
+        folders, but you can have it do almost anything you like.
+        People who get lots of mail, or who often need to refer to old
+        messages, find filters especially helpful, but they're good
+        for anybody who gets more than a few messages a day.  To
+        create a filter, open the <interface>filter
+        assistant</interface> by selecting
+	<menuchoice>
+	  <guimenu>Settings</guimenu> 
+          <guimenuitem>Mail Filters</guimenuitem>
+        </menuchoice>.
+      </para>
+            
+       <figure id="usage-mail-filters-fig-assist">
+	 <title>El Asistente de Filtros</title>
+	 <screenshot>
+	  <screeninfo>The Filter Assistant</screeninfo>
+	  <graphic fileref="fig/filter-assist-fig" format="png" srccredit="Aaron Weber">
+	</graphic>
+	</screenshot>
+      </figure>
+
+      <para>
+        The <interface>filter assistant</interface> window contains a
+        list of your current filters, sorted by the order in which
+        they are used.  From the drop-down box at the top of the
+        window, choose <guilabel>Incoming</guilabel> to display
+        filters for incoming mail, and <guilabel>Outgoing</guilabel>
+        for those which sort only outgoing mail.
+      </para>
+      <para>
+         The <interface>filter assistant</interface> also has a set of
+         buttons:
+        <itemizedlist>
+
+           <listitem><para>
+            <guibutton>Add</guibutton> &mdash; Create a new filter.
+           </para></listitem>
+
+           <listitem><para>
+            <guibutton>Edit</guibutton> &mdash; Edit an existing filter.
+           </para></listitem>
+
+           <listitem><para>
+            <guibutton>Delete</guibutton> &mdash; Delete the selected filter.
+           </para></listitem>
+
+           <listitem><para> <guibutton>Up</guibutton> &mdash; Move the
+            selected filter up in the list so it gets applied first.
+           </para></listitem>
+
+           <listitem><para>
+            <guibutton>Down</guibutton> &mdash;  Move the selected filter down 
+             in the list, so it comes into play later.
+           </para></listitem>
+        </itemizedlist>
+
+        If you don't have any filters set up, the only one of those
+        buttons you can click is <guibutton>Add</guibutton>, which
+        will open a dialog to let you add a filter rule.  If you do
+        have filters, you can either add a new filter rule, or select
+        one from your list and click <guibutton>Edit</guibutton>.
+      </para>
+      <para>
+        The filter rule editor, shown in <xref
+        linkend="usage-mail-filters-fig-new">, is where you'll
+        actually create your filtering rule.
+
+       <figure id="usage-mail-filters-fig-new">
+	 <title>Creating a new Filter</title>
+	 <screenshot>
+	  <screeninfo>Creating a new Filter</screeninfo>
+	  <graphic fileref="fig/filter-new-fig" format="png" srccredit="Aaron Weber">
+	</graphic>
+	</screenshot>
+      </figure>
+      </para>
+      <para>
+        Enter a name for your filter in the <guilabel>Rule
+        Name</guilabel> field, and then begin choosing the criteria
+        you'd like to use as you sort your mail.  Choose how many
+        criteria you'd like by pressing <guibutton>Add
+        Criterion</guibutton> and <guibutton>Remove
+        Criterion</guibutton>.  If you have multiple criteria, you
+        should then decide whether to have the filter do its job only
+        <guilabel>if all criteria are met</guilabel>, or <guilabel>if
+        any criteria are met</guilabel>.
+     </para>
+     <para>
+        For each filter criterion, you must first select what
+        part of the message you want the filter to examine:
+        <variablelist>
+	  <varlistentry>
+	    <term><guilabel>Sender</guilabel></term>
+	    <listitem><para>
+                The sender's address.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Recipients</guilabel></term>
+	    <listitem><para>
+               The recipients of the message.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Subject</guilabel></term>
+	    <listitem><para>
+                The subject line of the message.
+            </para></listitem>
+	  </varlistentry>
+
+
+	  <varlistentry>
+	    <term><guilabel>Specific Header</guilabel></term>
+	    <listitem><para>
+              The filter can look at any header you
+	      want, even obscure or custom ones. Enter the header name
+	      in the first text box, and put your search text in the
+	      second one.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Message Body</guilabel></term>
+	    <listitem><para>
+                Search in the actual text of the message.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Expression</guilabel></term>
+	    <listitem>
+             <para>
+               Enter a <glossterm linkend="regular-expression">regular
+	       expression</glossterm>, and
+	       <application>Evolution</application> will search the
+	       entire message, including headers, to match it for you.
+	     </para>
+           </listitem>
+	  </varlistentry>
+
+
+	  <varlistentry>
+	    <term><guilabel>Date Sent</guilabel></term>
+	    <listitem><para> Filter messages by when they were sent:
+	    First, choose the conditions you want a message to
+	    meet&mdash; <guilabel>before</guilabel> a given time,
+	    <guilabel>after</guilabel> it, and so forth.  Then, choose
+	    the time. The filter will compare the message's time-stamp
+	    to the system clock when the filter is run, or to a
+	    specific time and date you choose from a calendar.  You
+	    can even have it look for messages within a range of time
+	    relative to the filter&mdash perhaps you're looking for
+	    messages less than two days old.  </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Date Recieved</guilabel></term>
+	    <listitem><para>
+                This works the same way as the <guilabel>Date Sent</guilabel> 
+                option, except that it compares the time you got the message 
+                with the dates you specify.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Priority</guilabel></term>
+	    <listitem><para>
+               Emails have a standard priority range from -3 (least
+               important) to 3 (most important). You can have filters set the
+               priority of messages you recieve, and then have other filters 
+               applied only to those messages which have a certain priority.
+            </para></listitem>
+           </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Regex Match</guilabel></term>
+	    <listitem>
+              <para>
+                If you know your way around a <glossterm
+  	        linkend="regular-expression">regex</glossterm>, or
+  	        regular expression, put your knowledge to use here.
+  	       </para>
+            </listitem>
+          </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Source</guilabel></term>
+	    <listitem>
+               <para>
+               Filter messages according the server you got them from.
+               You can enter a URL or choose one from the drop-down
+               list.  This ability is only relevant if you use more
+               than one mail source.
+             </para>
+            </listitem>
+	  </varlistentry>
+	</variablelist>
+      </para>
+        <para>
+        Now, tell it what to do with those messages.  If you want more
+        actions, click <guibutton>Add Action</guibutton>; if you want
+        fewer, click <guibutton>Remove Action</guibutton>.  And choose
+        again:
+        <variablelist>
+
+	  <varlistentry>
+	    <term><guilabel>Copy to Folder</guilabel></term>
+	    <listitem><para>
+               If you select this item, <application>Evolution</application>
+               will put the messages into a folder you specify.  Click the 
+               <guibutton>&lt;click here to select a folder&gt;</guibutton> button
+               to select a folder. 
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Move to Folder</guilabel></term>
+	    <listitem><para>
+               If you select this item, <application>Evolution</application>
+               will put the messages into a folder you specify.  Click the 
+               <guibutton>&lt;click here to select a folder&gt;</guibutton> button
+               to select a folder. 
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Forward to Address</guilabel></term>
+	    <listitem><para>
+                Select this, enter an address, and the addressee will
+                get a copy of the message.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Delete</guilabel></term>
+	    <listitem><para>
+                Marks the message for deletion.  You can still get the message
+                back, at least until you <guimenuitem>Expunge</guimenuitem> your
+                mail yourself.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Stop Processing</guilabel></term>
+	    <listitem><para>
+              Select this if you want to tell all other filters to ignore 
+              this message, because whatever you've done with it so far
+              is plenty.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Assign Color</guilabel></term>
+	    <listitem><para>
+                Select this item, and <application>Evolution</application>
+                will mark the message with whatever color you please.
+            </para></listitem>
+	  </varlistentry>
+
+	  <varlistentry>
+	    <term><guilabel>Assign Score</guilabel></term>
+	    <listitem><para> If you know that all mail with
+	    "important" somewhere in the message body line is
+	    important, you can give it a high priority score. In a subsequent filter you can 
+            then arrange your messages by their priority score.
+	  </para></listitem>
+	  </varlistentry>
+
+	</variablelist>
+      </para>
+      <para>
+        You're done.  Click <guibutton>OK</guibutton> to use this
+        filter, or <guibutton>Cancel</guibutton> to close the window
+        without saving any changes.
+      </para>
+
+
+
+   <!-- FIXME: This needs to be in there.  But the feature is temporarily
+         disabled and I don't know how it will be reimplemented.
+
+	  <itemizedlist>
+	    <listitem>
+	       <para>
+		 <guilabel>When mail arrives:</guilabel> Select
+		 this option to have messages filtered as they
+		 arrive.
+	       </para>
+	     </listitem>
+	     <listitem>
+	       <para>
+		 <guilabel>When mail is sent:</guilabel> Select
+		 this option to filter your outgoing mail.  You
+		 can use this feature to keep your
+		 <interface>Outbox</interface> as organized as
+		 your <interface>Inbox</interface>.
+	     </para>
+	  </listitem>
+	</itemizedlist>
+      </para>
+
+    -->
+
+      <note>
+	<title>Dos Características Notables de los Filtros</title>
+	<para>
+	  <itemizedlist>
+	    <listitem><para>
+              El correo de entrada que sus filtros no mueven va a la carpeta Inbox; 
+              el correo de salida que no mueven acaba en la carpeta Sent.
+             </para>
+	    </listitem>
+
+	    <listitem><para>Si mueve una carpeta, sus filtros
+	    la seguirán.  </para></listitem>
+	  </itemizedlist>
+	</para>
+      </note>
+    </sect2>
+
+
+
+    <sect2 id="usage-mail-organize-vFolders">
+      <title>Estar Realmente Organizado con Carpetas Virtuales</title>
+      <para>
+	If filters aren't flexible enough for you, or you find
+	yourself performing the same search again and again, consider
+	a virtual folder. Virtual folders, or vFolders, are an
+	advanced way of viewing your email messages within
+	<application>Evolution</application>.  If you get a lot of
+	mail or often forget where you put messages, virtual folders can help
+	you stay on top of things.
+      </para>
+      <para>
+	A virtual folder is really a hybrid of all the other organizational
+	tools: it looks like a folder, it acts like a search, and you
+	set it up like a filter.  In other words, while a conventional
+	folder actually contains messages, a virtual folder is a view of
+	messages that may be in several different folders.  The
+	messages it contains are determined on the fly using a set of
+	criteria you choose in advance.
+      </para>
+
+      <para>
+	As messages that meet the virtual folder criteria arrive or are
+	deleted, <application>Evolution</application> will
+	automatically place them in and remove them from the
+	virtual folder contents list.  When you delete a message, it gets
+	erased from the folder in which it actually exists, as well as
+	any virtual folders which display it.
+      </para>
+
+      <para>
+	Imagine a business trying to keep track of mail from hundreds
+	of vendors and clients, or a university with overlapping and
+	changing groups of faculty, staff, administrators and
+	students.  The more mail you need to organize, the less you
+	can afford the sort of confusion that stems from an
+	organizational system that's not flexible enough.  Virtual folders
+	make for better organization because they can accept
+	overlapping groups in a way that regular folders and filing
+	systems can't.
+      </para>
+
+      <example id="usage-mail-organize-vFolders-ex">
+	<title>Usando Carpetas, Búsquedas, y Carpetas Virtuales</title>
+	<para>
+	   Para organizar el correo en mi buzón, defino una carpeta virtual para
+	   los mensajes de mi amiga y compañera Anna.  Tengo otra para los
+	   los mensajes que tienen "ximian.com" en la dirección y "Evolution"
+	   en el asunto, así puedo registrar que personas del trabajo me escriben
+	   acerca de <application>Evolution</application>. Si Anna me envía un
+	   mensaje acerca de cualquier cosa excepto Evolution, solo aparece
+	   en la carpeta "Anna". Cuando Anna me escribe acerca de la interfaz
+	   de usuario de <application>Evolution</application>, puedo ver ese
+	   mensaje en la carpeta virtual "Anna" y en la carpeta virtual
+	   "Discusión Interna sobre Evolution".
+	</para>
+      </example>
+
+	<!--  (INSERT SCREENSHOT HERE: virtual folders in action) -->
+
+      <para>
+	 To create a virtual folder, select <menuchoice>
+	 <guimenu>Settings</guimenu> <guimenuitem>Virtual Folder
+	 Editor</guimenuitem> </menuchoice>.  This will bring up a
+	 dialog box that looks suspiciously like the filter window
+	 (for more information on filters, see <xref
+	 linkend="usage-mail-organize-filters">), and which
+	 presents you with a list of virtual folders you have previously
+	 created. If you have created any virtual folders, they are listed
+	 here, and you can select, edit or remove them if you wish.
+	 If you have not created any, there will be only one available
+	 option: click <guibutton>Add</guibutton> to add a new
+	 Virtual Folder.
+      </para>
+      <para>
+	 You can enter a name for your virtual folder in the
+	 <guilabel>Name</guilabel>.  Then, tell
+	 <application>Evolution</application> what messages to look
+	 for.  This process is exactly like filter creation: decide
+	 between <guilabel>Match all parts</guilabel> and
+	 <guilabel>Match any part</guilabel>, then choose what part of
+	 the message to look in, what sort of matching to perform, and
+	 specify exactly what it is that you want to find, be it a
+	 line of text, a score, a regular expression, or a particular date or
+	 range of dates.
+       </para>
+       <para>
+         The second part, however, is slightly different.  In the
+         section of the window labelled <guilabel>Virtual Folder Sources
+         </guilabel> is a list of folders in which
+         <application>Evolution</application> will search for the
+         contents of your vFolder.  Click <guibutton>Add</guibutton>
+         to add a folder, or <guibutton>Remove</guibutton> to remove
+         one.  That way, you can have your vFolder search in
+         newsgroups, or just in one of your mailboxes, or just in a
+         select few folders you've already screened with filters.
+       </para>
+       <para>
+        The vFolder creation window is shown in <xref
+	linkend="usage-mail-vfolder-fig-createrule">
+
+       <figure id="usage-mail-vfolder-fig-createrule">
+	 <title>Selecting a vFolder Rule</title>
+	 <screenshot>
+	  <screeninfo>Creating a vFolder Rule</screeninfo>
+	  <graphic fileref="fig/vfolder-createrule-fig" format="png" srccredit="Aaron Weber">
+	</graphic>
+	</screenshot>
+      </figure>
+      </para>
+    </sect2>
+    <sect2 id="usage-mail-subscriptions">
+      <title>Subscription Management</title>
+      <para>
+         <application>Evolution</application> lets you handle your
+         IMAP and newsgroup subscriptions with the same tool: the
+         subscriptions manager.  To start using it, choose
+         <menuchoice> <guimenu>Settings</guimenu> <guimenuitem>Manage
+         Subscriptions</guimenuitem> </menuchoice>.
+      </para>
+      <para>
+         If you have configured any IMAP (mail) or NNTP (news)
+         servers, you will see them listed in the left half of the
+         subscription management window.  Click on a server to select
+         it, and you will see the folders or newsgroups available to
+         you.  You can then select individual folders and subscribe to
+         them, or remove yourself from the subscription list.
+      </para>
+      <para>
+        Once you have subscribed to a folder or newsgroup, your system
+        will check for new messages whenever you press the
+        <guibutton>Get Mail</guibutton> button.
+      </para>
+
+    </sect2>
+  </sect1>
+</chapter>
+
+