2000-09-20 JP Rosevear * pcs/cal-backend.c (cal_backend_get_log_entries): Oops 2000-09-20 JP Rosevear * pcs/cal-backend.c (cal_backend_get_log_entries): Use a local sax handler. * conduits/todo/todo-conduit.c (pre_sync): Use xmlSAXParseFile (map_sax_parse): Delete 2000-09-20 JP Rosevear * pcs/cal-backend.c (cal_backend_log_sax_start_element): Properly assign the CalObjChange type. (cal_backend_log_sax_parse): Delete (cal_backend_get_log_entries): Use xmlSAXUserParseFile 2000-09-19 JP Rosevear * pcs/cal-backend.c (cal_backend_set_uri): New utility function (cal_backend_load): use above (cal_backend_create): use above (cal_backend_log_name): Take a uri instead of a backend param * pcs/cal-backend-file.c: Get rid of useless hash functions (cal_backend_file_load): Check to make sure path exists and is local (cal_backend_file_load): Unref the current uri if there is one (cal_backend_file_create): ditto * pcs/cal-backend.c (cal_backend_last_client_gone): Sync before shooting ourselves in the foot * pcs/cal-backend-file.c (save): Fully implement backing up the calendar before writing out the new entry. 2000-09-19 JP Rosevear * conduits/todo/todo-conduit.c (check_for_slow_setting): Add some other cases where a slow sync is in order (pre_sync): Pre load the uids, the map and the add/mod/del lists (match_record): Use the map hash to match records (iterate): Iterate using the pre-loaded uid list (iterate_specific): Iterate using the add/mod/del lists (purge): Delete all entries in the del list (set_status): Set status by adding to an appropriate list (set_pilot_id): Set pilot_id by updating map hash * conduits/todo/todo-conduit.h: Add lists for added, modified and deleted objects * conduits/todo/todo-conduit.c (map_name): Get the pilot_id->uid map file name (map_sax_start_element): SAX handler to extract a pilot_id->uid mapping (map_sax_parse): Parse the given file and build a pilot_id->uid hash (map_write_foreach): Write out individual mapping elements (map_write): Write out the pilot_id->uid mapping (start_calendar_server_cb): Rename from gnome_calendar_load_cb * conduits/todo/todo-conduit-config.h: Rename pilotID to pilot_id * conduits/todo/e-todo.conduit.in: A little renaming * conduits/todo/Makefile.am: Fix build slightly * pcs/cal.c (build_change_seq): Build a corba sequence out of a list of CalObjChanges (Cal_get_objects_in_range): Implement new corba function * pcs/cal-backend.c (cal_backend_init): Intiliaze to NULL (cal_backend_load): Track the uri so we can write the log file to the same place (cal_backend_log_name): Figure out the log filename/path based on the calendar uri (cal_backend_set_node_timet): Set an xml node property value from a time_t (cal_backend_log_entry): Adds a log entry to list waiting to be written out (cal_backend_log_sync): Syncs the log entries to disk (cal_backend_log_sax_start_element): SAX callback for reading in log entries (cal_backend_log_sax_end_element): ditto (cal_backend_log_sax_parse): Main SAX parser call to parse the log file looking for particular log entries and creating a CalObjChange hash with the last change for each object (cal_backend_get_log_entries): Returns a hash of objects of a given type changed since the given time (cal_backend_update_object): Add appropriate log entries (cal_backend_remove_object): ditto (cal_backend_get_changed_uids): Implement new idl interface call (cal_backend_foreach_changed): Convert CalObjChange hash into a list * pcs/cal-backend-imc.[hc]: Remove crufty files * pcs/cal-backend-file.c (cal_backend_file_get_type_by_uid): New function that returns the CalObjType for a uid. * cal-client/cal-client.h: Update prototypes. * cal-client/cal-client.c (build_change_list): Build a list of CalObjChange items from a corba sequence. (cal_client_get_changed_uids): New accessor method for the similarly named addition to the idl file. * cal-util/cal-util.h: Update prototypes and add CalObjChangeType enum. * cal-util/cal-util.c (cal_obj_change_list_free): New utility method to free a list of CalObjChange objects. * idl/evolution-calendar.idl: Add get_changed_uids method and associated types. 2000-09-18 Christopher James Lahey * gui/Makefile.am: Added $(EXTRA_GNOME_CFLAGS) and $(EXTRA_GNOME_LIBS). Removed unneeded libraries. * gui/calendar-model.h, gui/e-calendar-table.c, gui/e-day-view.c, gui/e-week-view-event-item.c, gui/e-week-view.c, gui/event-editor.c, gui/gncal-todo.c, gui/gnome-cal.c, gui/main.c, gui/print.c, gui/dialogs/task-editor.c: Fixed the #include lines to deal properly with gal. * gui/check-filled.xpm: New file since we can't include it from e-table anymore. 2000-09-16 Michael Meeks * gui/Makefile.am (INCLUDES): add datadir * gui/calendar-commands.c (calendar_control_activate): use it. 2000-09-14 JP Rosevear * conduits/todo/.cvsignore: Shush 2000-09-14 JP Rosevear * Add headers with GPL notice and credit copyright to those appropriate * conduits/todo/todo-conduit-control-applet.c (doHelp): Update name, authors, copyright for about dialog. (activate_sync_type): Tidy * conduits/todo/Makefile.am: Rename binaries and libs to e-todo* to avoid conflicts. * conduits/todo/e-todo.conduit.in: Reflect binary/lib name changes * conduits/todo/e-todo-conduit-control-applet.desktop: ditto * conduits/todo/todo.conduit.in: Removed * conduits/todo/todo-conduit-control-applet.desktop: Removed * conduits/todo/todo-conduit-config.h (todoconduit_load_configuration): The config file will now be called e-todo-conduit (todoconduit_save_configuration): ditto * conduits/todo/todo-conduit.c: Some renaming to keep consistent. (pre_sync): Remove commented out function that does not exist. * conduits/todo/todo-conduit-control-applet.c: ditto * conduits/todo/todo-conduit-config.h: ditto * conduits/todo/todo-conduit.h: ditto 2000-09-07 Michael Meeks * gui/calendar-commands.c: Re-write most UI handler code. 2000-09-13 Federico Mena Quintero * gui/calendar-model.c (obj_updated_cb): Removed an unused variable. * gui/calendar-model.c (obj_updated_cb): See if the new object matches the type of objects we were told to deal with. (load_objects): Likewise. 2000-09-13 JP Rosevear * pcs/cal-backend-file.c (remove_component): Only remove the pilot item from the hash if it exists in the first place. 2000-09-12 JP Rosevear * pcs/cal-backend-file.c (add_component): plug leakage 2000-09-12 JP Rosevear * conduits/calendar/calendar-conduit.c: Hack to compile for distcheck. * conduits/calendar/calendar-conduit.h: Remove calobj.h dependency 2000-09-12 JP Rosevear * pcs/cal-backend-file.c (cal_backend_file_load): Use g_int_* for now (cal_backend_file_create): ditto * conduits/todo/todo-conduit.c (local_record_from_compobject): Make this actually fill in the todo record. (find_record_in_repository): Add debug stuff (iterate_specific): Use the already exisiting utility function * pcs/cal-backend-file.c (cal_backend_file_update_pilot_id): correct the status and id types. g_strdup the uid since this is not a constified return (cal_backend_file_get_uid_by_pilot_id): correct the id type 2000-09-12 Ettore Perazzoli * gui/Makefile.am: Remove `ui.xml' stuff. * pcs/cal-backend.c: Dont' #include calobj.h anymore as it's gone. 2000-09-12 Federico Mena Quintero * gui/gnome-cal.c (gnome_calendar_construct): Connect to the "cal_loaded" signal of the client here. (connect_load): Removed function. (disconnect_load): Removed function. (cal_loaded_cb): Store the URI we are loading in the GnomeCal structure instead of in a weird closure. This gets rid of the connect/disconnect mess as well. (gnome_calendar_open): Store the URI in the GnomeCal. 2000-09-11 Christopher James Lahey * gui/e-day-view.c: Fixed a warning (removed unused variable gfloat width from e_day_view_get_event_position.) 2000-09-11 JP Rosevear * conduits/todo/todo-conduit.c: Handle renaming, header cleanup * conduits/todo/todo-conduit.h: Rename GCalLocalRecord to EToDoLocalRecord, header cleanup 2000-09-11 JP Rosevear * conduits/todo/todo-conduit.c (comp_from_remote_record): Use description list instead of comment list for pilot todo note (transmit): Check for null cal component properties, set priority correctly, use description list instead of comment list. Make pilot record private when appropriate. 2000-09-10 JP Rosevear * conduits/todo/todo-conduit.c (comp_from_remote_record): Only set the due date only if it exists 2000-09-10 JP Rosevear * gui/calendar-model.c (get_is_complete): Relying on the status field is somewhat faulty since it is related to group scheduling 2000-09-10 JP Rosevear * conduits/todo/todo-conduit.c (update_calendar_entry_in_repository): Make log output a little more sensible (comp_from_remote_record): Minor correction when making a CalComponent from scratch. (update_record): Use comp_from_remote_record for new items, rather than repeating the code here. 2000-09-10 JP Rosevear * conduits/todo/todo-conduit.c: Remove catch_ret_val function since its no longer useful. Fix naming of various fields from the header changes. Use GnomePilotRecord* stuff instead of ICAL_PILOT_SYNC_* (e_todo_context_new): Rename from gcalconduit_new_context. Now takes a pilot id and loads the configuration here (e_todo_context_destroy): Rename from gcalconduit_destroy_context. Unref the client and destroy the configuration if they exist here (start_calendar_server): Change the default calendar name (local_record_from_comp_uid): Rename from local_record_from_ical_uid (local_record_from_compobject): Rename from local_record_from_icalobject. Properly do the pilot id and status. (comp_from_remote_record): Rename from ical_from_remote_record. Handle due, complete, classification and pilot stuff properly (pre_sync): Remove some old stuff. We need to figure out how to set some of the field values. (set_status): Reflect pilot status changes from above (conduit_destroy_gpilot_conduit): Remove cleanup stuff that is now done by e_todo_context_destroy (conduit_get_gpilot_conduit): Only set the context as object data of the conduit. * conduits/todo/todo-conduit.h: Rename GCalConduitContext to EToDoConduitContext. Remove some unused struct fields. For GCalLocalRecord, rename ical to comp. 2000-09-11 Damon Chaplin * gui/dialogs/task-editor.c: changed to use EDateEdit. * gui/dialogs/task-editor-dialog.glade: added "None" option to Classification option menu, and used custom widgets for the date entries so we can use EDateEdit widgets. * gui/event-editor.c: changed to use EDateEdit. Note that this needs to be fixed at some point to handle invalid dates, i.e. when e_date_edit_get_time returns -1. * gui/calendar-model.c (ensure_task_complete): (ensure_task_not_complete): new functions to set the related properties to make sure a task is marked as complete on not, i.e. "Date Completed" "Status" and "Percent" properties. 2000-09-08 Damon Chaplin * gui/calendar-model.c (get_is_complete): use the status field rather than the completed date, as it is more reliable. (get_is_overdue): use get_is_complete(). (calendar_model_mark_task_complete): check if it is already complete, and if so don't update it. * cal-util/cal-component.c (cal_component_get_status): (cal_component_set_status): added functions to support the STATUS property. Also added the property to CalComponentPrivate and set it to NULL in free_icalcomponent(). Someone should check my code as I've mainly done a Cut & Paste job. 2000-09-10 JP Rosevear * conduits/todo/todo-conduit.c: Convert "//" style comments (local_record_from_ical_uid): Remove iCalObject cruft (ical_from_remote_record): ditto (free_match): Properly unref the CalComponent 2000-09-10 JP Rosevear * conduits/todo/todo-conduit.c (local_record_from_icalobject): Use cal component pilot stuff properly (find_record_in_repository): Remove cruft (ical_from_remote_record): Remove cruft (update_record): Set the vtype immediately after creation. Remove cruft * conduits/todo/todo-conduit.h: Remove iCalObject stuff * conduits/todo/todo-conduit-config.h: Move all the config stuff here, I need to kill the warnings at some point * conduits/todo/todo-conduit-control-applet.c (doRevertSettings): Set all the state variables correctly on a revert (doSaveSettings): Update original state (doHelp): Rename from about_cb (main): Destroy configurations when done * conduits/todo/Makefile.am: Tidy * pcs/cal-backend-file.c (cbf_pilot_hash): Function for hashing pilot ids (cbf_pilot_equal): For hash table of pilot ids (cal_backend_file_destroy): Destroy pilot id hash (add_component): Insert the uid into the pilot hash (remove_component): Remove the uid from the pilot hash (cal_backend_file_load): Create the pilot hash (cal_backend_file_create): ditto (cal_backend_file_get_uid_by_pilot_id): Implement using the pilot hash (cal_backend_file_update_pilot_id): ditto * cal-util/cal-component.h: Update prototypes * cal-util/cal-component.c (cal_component_get_pilot_id): Implement using ical X properties (cal_component_set_pilot_id): ditto (cal_component_get_pilot_status): ditto (cal_component_set_pilot_status): ditto (cal_component_free_pilot_id): Free a pilot id (cal_component_free_pilot_status): Free a pilot status 2000-09-09 Ettore Perazzoli * gui/dialogs/Makefile.am (INCLUDES): Add `-I$(top_builddir)/libical/src/libical' so that we get `icalversion.h' from the build directory instead of taking it from the installation directory, which is of course Wrong (tm). * gui/Makefile.am (INCLUDES): Likewise. 2000-09-08 Federico Mena Quintero * gui/gnome-cal.c (cal_loaded_cb): New function with the loading/creation state machine. It is carefully modelled after the state machine that started the Universe, so bow before it. (gnome_calendar_construct): Do not connect to cal_loaded here. (connect_load): The closure for the cal_loaded callback is a bit tricky, so provide a function to create it and connect to the signal. (disconnect_load): Disconnect from the signal and free the closure. (gnome_calendar_load_cb): Removed obsolete buggy function. (gnome_calendar_open): Use the new mechanism. * gui/control-factory.c (set_prop): The default filename is now calendar.ics. 2000-09-08 JP Rosevear * conduits/calendar/calendar-conduit.c (transmit): Use icaltime_as_timet 2000-09-08 Christopher James Lahey * cal-util/cal-recur.c, gui/e-day-view.c, gui/e-week-view.c, gui/event-editor.c, gui/getdate.y, gui/gncal-todo.c, gui/gnome-cal.c, gui/dialogs/task-editor.c: Fixed some warnings. 2000-09-08 JP Rosevear * conduits/calendar/Makefile.am: Tidy * conduits/todo/Makefile.am: Tidy 2000-09-08 Federico Mena Quintero Fall equinox cleanup! OK, I know the equinox is not here yet, but weather has changed enough to warrant it. Sigh. This place is definitely not the tropics. * gui/gnome-cal.c (obj_updated_cb): Renamed from gnome_calendar_object_updated_cb(); fixed prototype. (obj_removed_cb): Renamed from gnome_calendar_object_removed_cb(); fixed prototype. (GnomeCalendarPrivate): Moved all the GnomeCalendar fields to a private structure so I don't have to rebuild the whole calendar GUI directory every time something changes in the object. (GnomeCalendarPrivate): Removed the property bag and the control fields; they are local to the control-factory now. (gnome_calendar_update_view_buttons): Remove the ignore_view_button_clicks mess and just block the signal. (gnome_calendar_set_view): Added a "focus" argument to indicate whether we want the main widget in the specified view to grab the focus. (gnome_calendar_set_view_internal): Handle the focus argument here. (gnome_calendar_set_view_buttons): Temporary hack to notify the calendar about its buttons. (gnome_calendar_get_selected_time_range): New function. (gnome_calendar_get_cal_client): New function. * gui/control-factory.c (calendar_properties_init): Keep the property bag local to here; it does not need to be in the calendar object yet. (control_factory_fn): Renamed from control_factory(). Just use control_factory_new_control(). (control_factory_new_control): Moved the stuff over from create_control(), and keep the control local to here. Check the return value of bonobo_control_new(). * gui/calendar-commands.c (show_day_view_clicked): Remove the ignore_view_button_clicks mess. (new_calendar): Removed the useless "page" argument. (calendar_control_activate): Use gnome_calendar_set_view_buttons() for now. 2000-09-07 Lauris Kaplinski * cal-client/Makefile.am: Added -lunicode * gui/dialogs/task-editor.c: More UTF-8 wrappers (priority_index_to_value): Kill warning, add assertion 2000-09-06 JP Rosevear * gui/e-day-view-main-item.c (e_day_view_main_item_draw_day_event): Use new cal_component_has_recurrences convenience function * gui/e-week-view.c (e_week_view_show_popup_menu): ditto * gui/e-week-view-event-item.c (e_week_view_event_item_draw_icons): ditto * gui/calendar-model.c (calendar_model_value_at): ditto (calendar_model_value_at): ditto * gui/e-day-view.c (e_day_view_on_event_click): ditto (e_day_view_on_event_right_click): ditto (e_day_view_on_top_canvas_motion): ditto (e_day_view_on_top_canvas_motion): ditto (e_day_view_on_main_canvas_motion): ditto (e_day_view_on_main_canvas_motion): ditto (e_day_view_reshape_day_event): ditto * gui/e-day-view-top-item.c (e_day_view_top_item_draw_long_event): ditto * gui/e-day-view.c (e_day_view_on_long_event_click): ditto 2000-09-06 JP Rosevear * cal-util/cal-recur.c (cal_recur_generate_instances): Use new convenience functions and only get the recurrence stuff if needed. Free the recurrence stuff if used. 2000-09-05 JP Rosevear * cal-util/cal-component.h: Add new prototypes * cal-util/cal-component.c (cal_component_has_exrules): Utility function to determine whether a cal component has any exrules (cal_component_has_exdates): Ditto for exdates (cal_component_has_exceptions): Utility function to determine whether a cal component has any exception rules (cal_component_has_recurrences):Utility function to determine whether a cal component has any recurrence rules 2000-09-05 JP Rosevear * gui/event-editor.c (dialog_to_comp_object): Kill all exdates if there are no dates in the box * cal-util/cal-recur.c (generate_instances_for_year): Add a special case for when there are exceptions but no rrules or rdates. (cal_obj_remove_exceptions): Use date only compare func (cal_obj_date_only_compare_func): New compare function that compares the date only, not the time. * gui/event-editor.c (dialog_to_comp_object): Need a break for the yearly recurrence type (dialog_to_comp_object): We need to allocate icaltimetypes for the exdate list (fill_widgets): Handle a weekly recurrence with no particular day set (dialog_to_comp_object): Kill all rrules if "None" is selected as the recurrence type by the user 2000-09-06 Damon Chaplin * gui/e-calendar-table.c (e_calendar_table_open_task): uses the new TaskEditor dialog. * gui/dialogs/task-editor.[hc]: * gui/dialogs/task-editor-dialog.glade: updated. Still need to fix the 'Status' property (CalComponent doesn't support it yet), and use a replacement for GnomeDateEdit, since we need to support setting 'None' as the date. 2000-09-04 Damon Chaplin * gui/event-editor.c (obj_updated_cb): (obj_removed_cb): compare the updated object's uid with the one we are editing, and just return if it doesn't match. 2000-09-01 Damon Chaplin * gui/gnome-cal.c (gnome_calendar_tag_calendar): added check to see if the client has loaded successfully. Gets rid of a few warnings. 2000-09-05 JP Rosevear * cal-util/cal-recur.c (generate_instances_for_year): The exdate and rdate lists are a list of icaltimetypes, not CalComponentPeriods *gui/e-day-view.c (e_day_view_on_delete_occurrence): The exdate list is a list of icaltimetypes, not CalComponentDateTimes 2000-09-05 JP Rosevear * gui/e-day-view.c (e_day_view_on_delete_occurrence): Append the exdate to the list AFTER we create the date value. 2000-09-05 JP Rosevear * cal-util/cal-component.c (cal_component_free_recur_list): Free the data, not the list element. 2000-09-05 JP Rosevear * cal-util/cal-recur.c (cal_recur_generate_instances): Compute the event duration using the event start/end times, not the interval times. 2000-09-05 JP Rosevear * cal-util/cal-recur.c (cal_recur_from_icalrecurrencetype): Check to see if r->enddate is (time_t)-1 and set to 0 if so 2000-09-02 Ettore Perazzoli * conduits/calendar/Makefile.am (INCLUDES): Add libical include directories and `$(BONOBO_GNOME_CFLAGS)'. * conduits/todo/Makefile.am (INCLUDES): Likewise. 2000-09-02 Lauris Kaplinski * gui/event-editor.c: e_utf8 wrappers * gui/gncal-todo.c: e_utf8_wrappers 2000-09-02 Christopher James Lahey * conduits/calendar/calendar-conduit.c, conduits/todo/todo-conduit.c, gui/e-week-view.c, gui/gnome-cal.c: Fixed some warnings. 2000-09-01 Federico Mena Quintero * gui/gnome-cal.c (gnome_calendar_new): Use gnome_calendar_construct() so that we can check for proper creation of the client. (gnome_calendar_destroy): Check that the client exists before we unref it. (gnome_calendar_construct): Do the CalClient creation here. Bind the views to it here as well instead of in setup_widgets(). (gnome_calendar_init): Call setup_widgets() here. * gui/e-calendar-table.c (e_calendar_table_destroy): Unref the model. 2000-09-01 JP Rosevear * conduits/todo/todo-conduit.c: Update for new libical. Conduits should atleast compile now. * conduits/calendar/calendar-conduit.c: ditto * Makefile.am: Build the conduits only when they've been enabled. 2000-09-01 JP Rosevear * gui/event-editor.c: Make toolbar save and close button. We should put a similar menu option in sometime. 2000-08-31 JP Rosevear * cal-util/cal-recur.c (array_to_list): Use ICAL_RECURRENCE_ARRAY_MAX instead of MAX_SHORT 2000-08-31 JP Rosevear * gui/event-editor.c (file_delete_cb): Implement delete option (dialog_to_comp_object): Set the weekday start value and use local not UTC time 2000-08-31 Federico Mena Quintero * gui/event-editor.c (file_delete_cb): No need to spit a warning if removal fails. (event_editor_destroy): Free the exception clist data. Unref the calendar client here. (close_dialog): Just call gtk_object_destroy() on the event editor; the destroy handler will free everything else. * cal-client/cal-client.c (cal_client_object_exists): Removed function; this is not useful because we operate asynchronously. * gui/e-day-view.c (e_day_view_on_delete_appointment): No need to spit a warning if removal fails. * gui/e-week-view.c (e_week_view_on_delete_appointment): Likewise. * gui/calendar-model.c (calendar_model_delete_task): Likewise. 2000-08-31 JP Rosevear * gui/event-editor.c (file_delete_cb): Implement delete option (recurrence_toggled): Make an ugly hack to get the recurrence pages showing properly since we don't yet implement all of the recurrence rule stuff. * cal-client/cal-client.c (cal_client_object_exists): New function to see if an object exists and is obtainable from the backend * cal-client/cal-client.h: Add prototype 2000-08-31 JP Rosevear * gui/gnome-cal.c (editor_closed_cb): Event editor destroyed callback to do hash cleanup (gnome_calendar_edit_object): Set event editor calendar client. * gui/event-editor.h: Add new prototype * gui/event-editor.c: Trash signal stuff. We will manipulate the client directly. Make the toolbar save and menu save items work identically. Add icons to the toolbar. (save_event_object): Call cal_client_update_object (close_dialog): Unref the client and disconnect signals Actually destroy the event editor object. (obj_updated_cb): New function. Doesn't really do anything yet but it will inform the user the event has changed elsewhere in the future. (obj_removed_cb): ditto (event_editor_set_cal_client): New function to set the calendar client * gui/gnome-cal.c (gnome_calendar_new_appointment): Commit the sequence to the cal component and use non UTC times. 2000-08-30 Lauris Kaplinski * gui/print.c: Countless small changes for gnome-print 0.21+ 2000-08-30 Damon Chaplin * gui/e-day-view.[hc]: * gui/e-day-view-main-item.c: * gui/e-week-view.[hc]: * gui/e-week-view-main-item.c: * gui/calendar-commands.c: * gui/gnome-cal.[hc]: switched to using new ECalendar widget, and a few other fixes. 2000-08-30 Federico Mena Quintero * gui/gnome-cal.h (GnomeCal): Removed unused field event_editor. * gui/e-day-view.c (e_day_view_key_press): Oops, set the dtstart/dtend on the component before adding it. (e_day_view_on_editing_stopped): No need to check for an UID. Update the summary properly. 2000-08-30 JP Rosevear * gui/e-week-view.c: Make sure the is_utc flag is always FALSE for icaltime_from_timet (e_week_view_on_unrecur_appointment): Use icaltimetype struct from the stack and make sure tzid is always NULL (e_week_view_key_press): ditto 2000-08-30 JP Rosevear * gui/e-day-view.c: Make sure the is_utc flag is always FALSE for icaltime_from_timet (e_day_view_on_unrecur_appointment): Use icaltimetype struct from the stack and make sure tzid is always NULL (e_day_view_finish_long_event_resize): ditto (e_day_view_finish_resize): ditto (e_day_view_on_top_canvas_drag_data_received): ditto (e_day_view_on_main_canvas_drag_data_received): ditto 2000-08-30 JP Rosevear * cal-client/cal-client.c (add_instance): Actually add the comp_instance struct to the instances list. We now appear to able to keep events and todos between sessions. Yay! 2000-08-29 Federico Mena Quintero Now the views monitor the client by themselves; it does not make sense to proxy all notifications through the GnomeCal. The GnomeCal should just be a meta-widget that holds all the views. At some later point we'll want to decouple the views from the GnomeCal so that they can be embedded anywhere; they should emit signals to request appropriate actions from the toplevel GUI instead of calling the GnomeCal directly. * gui/e-day-view.c (e_day_view_set_cal_client): New function; now the day view monitors the client by itself. (cal_loaded_cb): New callback; moved over from e_day_view_update_all_events(). (obj_updated_cb): New callback; moved over from e_day_view_update_event(). (obj_removed_cb): New callback; moved over from e_day_view_remove_event(). (e_day_view_update_all_events): Removed function. (e_day_view_update_event): Removed function. (e_day_view_remove_event): Removed function. (*): Use the day_view->client directly instead of fetching it from the GnomeCal. (e_day_view_destroy): Unref the client. (e_day_view_reload_events): Check if the client is loaded. (e_day_view_key_press): Set the vtype of the new component. * gui/e-week-view.c (e_week_view_set_cal_client): New function. (cal_loaded_cb): New callback. (obj_updated_cb): New callback. (obj_removed_cb): New callback. (e_week_view_update_all_events): Removed function. (e_week_view_update_event): Removed function. (e_week_view_remove_event): Removed function. (*): Use the week_view->client directly. (e_week_view_destroy): Unref the client. (e_week_view_reload_events): Check if the client is loaded. * gui/gnome-cal.c (setup_widgets): Set the cal_client on all the views. (gnome_calendar_update_all): Do not update the views, since now they do it themselves. (gnome_calendar_object_updated_cb): Likewise. (gnome_calendar_object_removed_cb): Likewise. (setup_widgets): Remove all to-do list cruft. (gnome_calendar_colors_changed): Likewise. (gnome_calendar_todo_properties_changed): Likewise. * gui/calendar-commands.h (todo_style_changed): Removed variable. * gui/gncal-todo.c: Removed old clist cruft; just left in the temporary dialog box for now. 2000-08-29 Dan Winship * cal-client/client-test.c: * cal-client/cal-client.c: * conduits/todo/todo-conduit.h: * conduits/calendar/calendar-conduit.h: remove USING_OAF checks. 2000-08-29 JP Rosevear * gui/gnome-cal.c (gnome_calendar_edit_object): Use event_editor_set_event_object * gui/event-editor.c (event_editor_set_event_object): Rename from event_editor_set_ical_object * gui/event-editor.h: Update prototype * gui/e-week-view.c (e_week_view_on_new_appointment): Call cal_component_commit_sequence after event changes. Default to these being all day events. 2000-08-29 JP Rosevear * gui/event-editor.c (dialog_to_comp_object): These are not UTC times 2000-08-28 Federico Mena Quintero * cal-client/cal-client.c (cal_client_is_loaded): New function. We need this from code that dynamically updates from a client and could not have connected to the "cal_loaded" signal right after the client was created. * gui/calendar-model.c (load_objects): Do not try to load the objects if the client has not been loaded yet. (cal_loaded_cb): Check the status value. * gui/calendar-model.h (CalendarModel): Declare the private structure here so that gdb will give me love. * pcs/cal-factory.h (CalFactory): Likewise. * pcs/cal.h (Cal): Likewise. * cal-client/cal-listener.h (CalListener): Likewise. * cal-client/cal-client.h (CalClient): Likewise. * pcs/cal-backend.h (CalBackend): This no longer has a private structure, so remove it. * cal-util/Makefile.am (libcal_util_la_SOURCES): Removed the vCalendar and old iCalendar cruft. (libcal_utilinclude_HEADERS): Likewise. Removed the obsolete iCalendar test program. 2000-08-28 JP Rosevear * cal-util/timeutil.h: We no longer need time_from_icaltimetype as libical has the API for this * cal-util/timeutil.c: ditto * cal-util/cal-recur.c: Replace time_from_icaltimetype with icaltime_as_timet * gui/calendar-model.c: ditto * gui/event-editor.c: ditto * gui/gnome-cal.c: ditto 2000-08-28 Federico Mena Quintero * pcs/cal-backend-file.c (remove_component): Remove the icalcomponent from the toplevel calendar here. (cal_backend_file_update_object): Do not remove it here. (cal_backend_file_remove_object): Do not remove it here. (add_component): Add the icalcomponent to the toplevel calendar if asked to. (cal_backend_file_update_object): Do not add it here. 2000-08-28 JP Rosevear * gui/event-editor.c (dialog_to_comp_object): Initiliaze tzid to null, only set recurrence rules and exception dates if there are any 2000-08-27 JP Rosevear * pcs/cal-backend-file.c (save): Write out the calendar object (cal_backend_file_update_object): Remove/add the icalcomponent from our master icalcomponent (the calendar) (cal_backend_file_remove_object): Remove the icalcomponent from our master icalcomponent 2000-08-26 JP Rosevear * gui/Makefile.am: Remove gnorba stuff * gui/main.c: ditto * gui/component-factory.c: ditto * gui/control-factory.c: ditto * gui/*.gnorba: ditto 2000-08-25 JP Rosevear * gui/e-calendar-table.c (e_calendar_table_init): Uncomment debug code. * gui/calendar-model.c (set_complete): Set the completed date to the current date (calendar_model_set_value_at): Handle complete field 2000-08-25 JP Rosevear * gui/calendar-model.c (get_is_complete): Don't attempt to free this if its null (calendar_model_duplicate_value): Implement for summary field value (calendar_model_initialize_value): Remove debug code * gui/e-calendar-table.c: Correct etable init xml (create_column): Pass the id to e_table_header_add_column rather than a hard coded one (e_calendar_table_init): Make sure summary column isn't added twice. Add an alarms column, else etable won't work with columns who have an ID higher than that 2000-08-24 JP Rosevear * gui/gncal-todo.c (ok_button): Properly append to list * gui/event-editor.c (dialog_to_comp_object): ditto * gui/e-day-view.c (e_day_view_on_new_appointment): The base times are not UTC * gui/e-week-view.c (e_week_view_on_new_appointment): ditto 2000-08-24 JP Rosevear * Update for libical 0.19 2000-08-24 Christopher James Lahey * gui/calendar-commands.c, gui/e-day-view.c, gui/e-week-view.c, gui/event-editor.c, gui/gncal-todo.c, gui/gnome-cal.c, gui/prop.c: Fixed some warnings. 2000-08-24 JP Rosevear * gui/e-week-view.c (e_week_view_on_new_appointment): Do not alloc the struct icaltimetype but point to one on the stack. More importantly, set the date.tzid to NULL. 2000-08-24 JP Rosevear * gui/gnome-cal.c (save_event_object_cb): Make signal names saner (released_event_object_cb): ditto (gnome_calendar_edit_object): ditto * gui/event-editor.h: Make signal names saner * gui/event-editor.c (event_editor_class_init): Make signal names saner now that we don't use ical object (save_event_object): ditto with callback names (file_save_cb): ditto (tb_save_and_close_cb): ditto (event_editor_set_ical_object): ditto * gui/e-day-view.c (e_day_view_update_event): Umm, != CAL_COMPONENT_EVENT (I hope that wasn't me!) 2000-08-24 Federico Mena Quintero * gui/e-day-view.c (e_day_view_on_new_appointment): Do not alloc the struct icaltimetype but point to one on the stack. More importantly, set the date.tzid to NULL. 2000-08-24 JP Rosevear * gui/event-editor-dialog.glade: Remove owner field * gui/event-editor.c (clear_widgets): Forget about owner field (get_widgets): ditto (fill_widgets): ditto 2000-08-24 JP Rosevear * gui/calendar-model.c (calendar_model_initialize_value): Handle summary field (calendar_model_value_is_empty): ditto (calendar_model_free_value): ditto 2000-08-23 JP Rosevear * gui/event-editor-dialog.glade: Remove status bar * cal-util/cal-component.c (cal_component_set_rrule_list): Allow a null list (cal_component_set_rdate_list): Allow a null list * gui/e-day-view.c (e_day_view_on_new_appointment): Commit the CalComponent sequence 2000-08-23 Federico Mena Quintero * gui/main.c: #include * gui/e-day-view-time-item.c (e_day_view_time_item_draw): Initialize time_min_x1 and hour_r to keep gcc happy. * gui/e-day-view.c (e_day_view_update_event_label): Warning fix. (e_day_view_update_main_canvas_drag): Initialize start_row. * gui/e-week-view-event-item.c (e_week_view_event_item_draw): Initialize time_y_small_min, icon_x. * Makefile.am (SUBDIRS): Re-enable the gui directory. * gui/prop.c (prop_store_alarm_default_values): Temporarily #if 0 out. 2000-08-23 JP Rosevear * gui/e-week-view.c (e_week_view_key_press): Set vtype of new CalComponent (e_week_view_on_new_appointment): ditto * gui/e-day-view.c (e_day_view_on_new_appointment): ditto 2000-08-23 JP Rosevear * gui/e-day-view-time-item.c: Include gnome.h for gettext purposes * gui/gnome-cal.c: ditto * gui/prop.c: #if out some alarm stuff 2000-08-23 Federico Mena Quintero * gui/e-calendar-table.c (e_calendar_table_init): Updated function. (e_calendar_table_open_task): Updated function. 2000-08-21 Federico Mena Quintero * gui/calendar-model.c (calendar_model_duplicate_value): Updated function. (calendar_model_free_value): Updated function. (calendar_model_initialize_value): Updated function. (calendar_model_value_is_empty): Updated function. (remove_object): Updated function. (obj_updated_cb): Updated function. (calendar_model_get_cal_client): Added inline docs. (calendar_model_delete_task): Updated. (calendar_model_mark_task_complete): Updated. (calendar_model_get_cal_object): Updated. 2000-08-21 Federico Mena Quintero * gui/calendar-model.c (set_categories): New function. (parse_time): Moved over from the old set_time_t(). This just parses the time and leaves the warning dialog for the caller. (set_datetime): New function. (set_geo): Updated old function. (set_percent): Updated old function. (set_priority): Updated old function. (set_summary): New function. (set_url): New function. (calendar_model_set_value_at): Updated function. (calendar_model_is_cell_editable): Updated function. (calendar_model_append_row): Updated. Added an ugly hack to accomodate ETable's lack of a real API for adding new items. Also, don't try to set columns that are not editable. 2000-08-21 JP Rosevear * gui/e-week-view.c (e_week_view_reload_events): Use CalObjType * gui/e-day-view.c (e_day_view_reload_events): ditto 2000-08-21 JP Rosevear * gui/e-day-view-main-item.c (e_day_view_main_item_draw_day_event): Use CalComponent instead of iCalObject. #if some alarm stuff 2000-08-21 JP Rosevear * gui/e-day-view-top-item.c (e_day_view_top_draw_long_event): Use CalComponent instead of iCalObject. #if some alarm stuff 2000-08-21 JP Rosevear * gui/e-day-view.h: Update prototypes * gui/e-day-view.c (e_day_view_on_unrecur_appointment): Remove commented out portions. * gui/e-week-view.c (e_week_view_on_unrecur_appointment): Tidy. 2000-08-21 JP Rosevear * gui/e-day-view.c (e_day_view_update_event): Use CalComponent instead of iCalObject. Work around not having a compare dates routine for two CalComponents. (e_day_view_reshape_long_event): Use CalComponent instead of iCalObject, #if some alarm stuff (e_day_view_reshape_day_event): ditto (e_day_view_reload_events): Use revamped CalClient (e_day_view_update_event_cb): Use CalComponent instead of iCalObject (e_day_view_foreach_event_with_uid): ditto (e_day_view_remove_event_cb): ditto (e_day_view_update_event_label): ditto (e_day_view_find_event_from_uid): ditto (e_day_view_on_event_click): ditto (e_day_view_on_event_right_click): ditto (e_day_view_on_new_appointment): ditto (e_day_view_on_edit_appointment): ditto (e_day_view_on_delete_occurrence): ditto (e_day_view_on_delete_appointment): ditto (e_day_view_on_unrecur_appointment): ditto (e_day_view_on_top_canvas_motion): ditto (e_day_view_on_main_canvas_motion): ditto (e_day_view_finish_long_event_resize): ditto (e_day_view_finish_resize): ditto (e_day_view_free_event_array): ditto (e_day_view_add_event): ditto (e_day_view_key_press): ditto (e_day_view_on_editing_stopped): ditto (e_day_view_update_top_canvas_drag): ditto (e_day_view_update_main_canvas_drag): ditto (e_day_view_on_drag_data_get): ditto (e_day_view_on_top_canvas_drag_data_received): ditto (e_day_view_on_main_canvas_drag_data_received): ditto 2000-08-20 JP Rosevear * gui/e-week-view-event-item.c (e_week_view_event_item_draw_icons): Use CalComponent instead of iCalObject. #if some alarm stuff 2000-08-20 JP Rosevear * gui/e-week-view.c (e_week_view_update_event): Use CalComponent instead of iCalObject. Work around not having a compare dates routine for two CalComponents. (e_week_view_reload_events): Use revamped CalClient (e_week_view_reshape_event_span): Use CalComponent instead of iCalObject, #if some alarm stuff (e_week_view_update_event_cb): Use CalComponent instead of iCalObject (e_week_view_foreach_event_with_uid): ditto (e_week_view_remove_event_cb): ditto (e_week_view_free_events): ditto (e_week_view_add_event): ditto (e_week_view_on_editing_stopped): ditto (e_week_view_find_event_from_uid): ditto (e_week_view_key_press): ditto (e_week_view_show_popup_menu): ditto (e_week_view_on_new_appointment): ditto (e_week_view_on_edit_appointment): ditto (e_week_view_on_delete_occurrence): ditto (e_week_view_on_delete_appointment): ditto (e_week_view_on_unrecur_appointment): ditto * gui/e-week-view.h: Update prototypes. 2000-08-18 JP Rosevear * gui/event-editor.h: Update prototypes. * gui/event-editor.c: Need to come back here later to fix the alarm stuff. The gui also needs to be completely redone to support the fancier CalComponent settings (exrules, rdates, etc) There are some warnings that I put in to mark some of these spots (event_editor_destroy): Use Calcomponent instead of iCalObject (make_title_from_comp): ditto (clear_widgets): ditto (fill_widgets): ditto (classification_get): ditto (dialog_to_comp_object): ditto (save_ical_object): ditto (close_dialog): ditto (event_editor_set_ical_object): ditto 2000-08-17 JP Rosevear * gui/gncal-todo.c (ok_button): Use CalComponent instead of iCalObject (cancel_button): ditto (gncal_todo_edit): ditto (add_todo): ditto (edit_todo): ditto (delete_todo): ditto (insert_in_clist): ditto (gncal_todo_update): ditto * gui/gncal-todo.h: Update prototypes 2000-08-16 JP Rosevear Rework gnome-cal.c - alarms are a tad broken ATM so this will need more cleaning later. * gui/gnome-cal.c (snooze): Use CalComponent instead of iCalObject (edit): ditto (audio_notification): ditto (display_notification_cb): Use CalComponent member of alarm_notify_closure rather than iCalObject (display_notification): ditto (trigger_alarm_cb): ditto. Use CalComponent alarm types (gnome_calendar_tag_calendar_cb): New cal_client_generate_instances callback to mark_gtk_calendar_day's (gnome_calendar_tag_calendar): Use above callback (save_ical_object_cb): Use CalComponent instead of iCalObject (gnome_calendar_edit_object): ditto (gnome_calendar_new_appointment): ditto 2000-08-15 JP Rosevear * gui/mark.c (mark_month_item_cb): Callback used to mark every event in a month. (mark_month_item): Use cal_client_generate_instances with above callback 2000-08-15 JP Rosevear * gui/print.c (print_month_small): Use cal_client_get_objects_in_range (print_day_details_cb): Callback used to create columns and fill events into a day view. Code should be shared with e-day-view in reality. Maybe need to go back to layout.[hc] a bit later (print_day_details): Use cal_client_generate_instances with above callback. Iterate over results to expand events to fit. (print_day_summary_cb): Callback to build list of event info for a day (print_day_summary): Use cal_client_generate_instances with above callback to generate the required event info for printing (print_todo_details_cb): Callback used create list of todo info (print_todo_details): Use cal_client_generate_instances with above callback to generate required todo info for printing. * gui/layout.[hc]: No longer used. 2000-08-12 Federico Mena Quintero * gui/calendar-model.c (get_is_overdue): Finished implementing. (calendar_model_value_at): Handle the color field. 2000-08-11 Seth Alves * cal-util/cal-component.c (cal_component_get_pilot_id): (cal_component_set_pilot_id): stubs for pilot id accessors (cal_component_get_pilot_status): (cal_component_set_pilot_status): stubs for pilot status accessors * conduits/calendar/calendar-conduit.c (transmit): start to convert to cal-component interface * conduits/todo/todo-conduit.c (transmit): same 2000-08-11 Federico Mena Quintero * gui/calendar-model.c (get_geo): Generate a prettier string for the geographical position. (get_classification): New function. (get_categories): New function. (get_completed): New function. (get_dtend): New function. (get_dtstart): New function. (get_due): New function. (get_percent): New function. (get_priority): New function. (get_summary): New function. (get_transparency): New function. (get_url): New function. (get_has_alarms): New function. (get_has_recurrences): New function. (get_is_complete): New function. (get_is_overdue): New function. * cal-util/cal-component.c (scan_property): Handle the GEO property. (free_icalcomponent): Likewise. (cal_component_get_geo): Likewise. (cal_component_set_geo): Likewise. (cal_component_free_geo): Likewise. (cal_component_set_exdate_list): Removed incorrect assertion. (cal_component_set_exrule_list): Removed incorrect assertion. (cal_component_get_next_alarm): Oops, this had not been implemented at all. (cal_component_has_rdates): New function. (cal_component_has_rrules): New function. * cal-util/cal-component.h (CalComponentField): Added the GEO property. 2000-08-11 Federico Mena Quintero * cal-util/cal-component.c (scan_property): Handle the PERCENT-COMPLETE property. (free_icalcomponent): Likewise. (cal_component_get_percent): Likewise. (cal_component_set_percent): Likewise. (cal_component_free_percent): Likewise. (scan_property): Handle the PRIORITY property. (free_icalcomponent): Likewise. (cal_component_get_priority): Likewise. (cal_component_set_priority): Likewise. (cal_component_free_priority): Likewise. * cal-util/cal-component.h (CalComponentField): New enumeration with the list of fields we support for ETable. 2000-08-10 Dan Winship * gui/component-factory.c (owner_set_cb): Update prototype. 2000-08-10 Federico Mena Quintero * gui/gnome-cal.c (gnome_calendar_new_appointment): New function. Mostly moved over from calendar-commands.c:display_objedit(). * gui/calendar-commands.c (calendar_iterate): Removed. Wheee! (display_objedit): Removed. (new_appointment_cb): New function. Just call gnome_calendar_new_appointment(). (display_objedit_today): Removed. (calendar_control_activate): Removed the "New appointment for today" option, since it is pretty useless. 2000-08-10 Federico Mena Quintero * cal-client/cal-client.c (cal_client_generate_instances): There. A pretty function to generate recurrence instances atomically so that clients don't have to jump through hoops. Now we can get rid of the ugly calendar_iterate() function. 2000-08-09 Cody Russell * gui/calendar-commands.c: Make the toolbar honor the user's gnomecc settings for detachable toolbars. 2000-08-09 Federico Mena Quintero * gui/alarm.c (pop_alarm): Oops, subtract the new alarm's trigger time from the current time. 2000-08-09 Christopher James Lahey * cal-client/cal-client.c: Fixed a warning. 2000-08-09 Christopher James Lahey * cal-client/cal-client.c, gui/e-calendar-table.c, pcs/cal.c: Fixed some warnings. 2000-08-08 Federico Mena Quintero * idl/evolution-calendar.idl (Cal): Added a get_objects_in_range() method. Takes in a time range and the type of component we are interested in; returns a list of UIDs. The idea is that ocurrences get computed in the client; we can have multiple recurrences in iCalendar and we cannot identify them trivially across the wire. (Cal): Removed the get_events_in_range() method. * pcs/cal-backend.c (cal_backend_free_uid_list): New function. (cal_backend_get_objects_in_range): New function. (cal_backend_get_events_in_range): Removed. * pcs/cal-backend-file.c (cal_backend_file_get_objects_in_range): Implemented new method. (cal_backend_file_get_events_in_range): Removed. * pcs/cal.c (Cal_get_events_in_range): Removed. (uncorba_obj_type): New function. (Cal_get_uids): Use uncorba_obj_type(). (Cal_get_n_objects): Likewise. (Cal_get_objects_in_range): Implemented new method. * cal-client/cal-client.c (cal_client_get_events_in_range): Removed. (cal_client_get_objects_in_range): Implemented. (corba_obj_type): New function. (cal_client_get_n_objects): Use corba_obj_type(). (cal_client_get_uids): Likewise. 2000-08-07 Federico Mena Quintero * cal-util/cal-component.c (cal_component_clone): New function. (cal_component_get_icalcomponent): Ensure that the SEQUENCE property does not need incrementing. * gui/dialogs/alarm-notify-dialog.c (alarm_notify_dialog): Use CalComponent. Deal with an empty summary property. 2000-08-07 Federico Mena Quintero * cal-util/cal-component.c (cal_component_get_as_string): Doh, libical owns the string's memory, so do not free it. * cal-client/client-test.c (create_client): Connect to the destroy signal of the client here. * cal-client/test.ics: New test file, modified from Eric Busboom's test file from RFC 2445. 2000-08-05 Federico Mena Quintero * cal-client/client-test.c (dump_component): This was gone for some reason. (main): Load a new test file. 2000-08-04 Federico Mena Quintero * cal-util/cal-component.c (cal_component_commit_sequence): New function to commit changes to the SEQUENCE property. (cal_component_get_as_string): Ensure that the sequence has been committed. * cal-client/cal-client.c (cal_client_get_object): Use CalComponent instead of the old iCalObject. (cal_client_update_object): Use iCalObject. Commit the SEQUENCE property before stringifying the object and piping it over to the Wombat. 2000-08-04 Seth Alves * conduits/todo/todo-conduit.c (conduit_get_gpilot_conduit): if oaf isn't initialized by the time the conduit starts, start it up. we do this because we need to start wombat with oaf, and gpilotd doesn't currently start oaf. 2000-08-04 Michael Meeks * gui/calendar-commands.c (calendar_control_activate): unref. 2000-08-02 Federico Mena Quintero * pcs/cal-backend-file.c (cal_backend_file_get_uid_by_pilot_id): Added stub for now. (cal_backend_file_update_pilot_id): Likewise. * pcs/Makefile.am (libpcs_a_SOURCES): Removed cal-backend-imc.[ch] from the list of sources. The idea is to move vCalendar importing to the GUI as a convenience function. 2000-08-02 Seth Alves * pcs/cal-backend-imc.c (cal_backend_imc_update_pilot_id): call save (cbimc) after setting the pilot id and status. 2000-08-02 Joe Shaw * pcs/cal-backend-file.c (cal_backend_file_update_pilot_id): Fixed a g_return_if_fail that had two parameters and thus wouldn't build. 2000-08-03 Damon Chaplin * gui/calendar-model.c (calendar_model_append_row): updated to match the new ETableModel append_row. This meant we could also get rid of the row_being_added and idle_id hack. 2000-08-02 Christopher James Lahey * gui/calendar-model.c: Emit "model_pre_change" signals as appropriate. 2000-08-02 Federico Mena Quintero * pcs/cal-backend-file.[ch]: New files for the iCalendar file backend. * pcs/Makefile.am (libpcs_a_SOURCES): Added cal-backend-file.[ch]. * cal-util/cal-component.c (cal_component_set_icalcomponent): Return an operation success code for if we are passed a component of a type we don't support. 2000-07-31 Federico Mena Quintero * cal-util/cal-recur.c (*): Use CalComponent and the new property types instead of the old iCalObject stuff. (cal_recur_generate_instances): Renamed from cal_object_generate_events(). Ensure that the component has the DTSTART property. (generate_instances_for_year): Renamed from cal_object_generate_events_for_year(). (cal_obj_expand_recurrence): Made static. (cal_recur_from_icalrecurrencetype): New function. We should really convert this whole file to use struct icalrecurrencetype instead. (cal_recur_free): New function. * cal-util/cal-recur.h (CalRecurType): Renamed from CalObjRecurType. (CalRecurrence): Renamed from CalObjRecurrence. * cal-util/timeutil.c (time_from_icaltimetype): New function. * cal-util/Makefile.am: Commented out the test-recur program. 2000-08-01 Damon Chaplin * Removed doc directory, since it is the old gnome-pim docs which aren't used any more. * Makefile.am (SUBDIRS): removed doc. 2000-07-26 Peter Williams * gui/calendar-model.c: compile fix for Solaris (works under Linux, too; don't know about others) * this is a test of whether CVS merge does what I think it will do. 2000-07-26 Federico Mena Quintero OK, it seems that we have all the interesting properties for single-user calendars now. RFC 2445 can bite me. * cal-util/cal-component.c (scan_property): Handle the RRULE property. Yay!. (scan_recur): Likewise, yow! (get_recur_list): Likewise, yeehaw! (get_recur_list): Likewise, honk honk! (set_recur_list): Likewise, booooga booooga! (cal_component_get_rrule_list): Likewise, squeek squeek! (cal_component_set_rrule_list): That's it, I ran out of sounds. (cal_component_free_recur_list): Likewise. (scan_property): Handle the EXRULE property. (free_icalcomponent): Likewise. (cal_component_get_exrule_list): Likewise. (cal_component_set_exrule_list): Likewise. (set_period_list): Oops, free the old properties as well as removing them. (set_text_list): Ditto. (cal_component_set_exdate_list): Ditto. * cal-util/cal-component.c: Put all the functions used to free returned values all together. (cal_component_set_rdate_list): Oops, mark SEQUENCE property to be incremented since the RFC requires it. (scan_property): Handle the EXDATE property. (scan_exdate): Likewise. (free_icalcomponent): Likewise. (cal_component_get_exdate_list): Likewise. (cal_component_set_exdate_list): Likewise. (cal_component_free_exdate_list): Likewise. 2000-07-26 Jeffrey Stedfast * gui/Makefile.am: Fixed a typo 2000-07-26 Jeffrey Stedfast * gui/Makefile.am: Added a few xpm files to the EXTRA DIST section 2000-07-25 Federico Mena Quintero * cal-util/cal-component.c (cal_component_free_period_list): New function. (scan_property): Handle the RDATE property. (scan_period): Likewise. (free_icalcomponent): Likewise. (get_period_list): Likewise. (set_period_list): Likewise. (cal_component_get_rdate_list): Likewise. (cal_component_set_rdate_list): Likewise. (scan_text): Simplify a bit since we only handle the ALTREP parameter; there is no need to iterate over all parameters. (scan_datetime): Simplify; just handle the TZID parameter. (scan_summary): Simplify; just handle the ALTREP parameter. (cal_component_get_as_string): New function. * idl/evolution-calendar.idl (CalObjType): Removed the TYPE_OTHER; now we only expose the types of objects we know about. * cal-util/cal-util.h (CalObjType): Likewise. * cal-client/cal-client.c (cal_client_get_n_objects): Likewise. (cal_client_get_uids): Likewise. * conduits/calendar/calendar-conduit.c (get_calendar_objects): Likewise. (check_for_slow_setting): Likewise. * pcs/cal-backend-imc.c (count_objects): Likewise. (build_uids_list): Likewise. * pcs/cal.c (Cal_get_uids): Likewise. (Cal_get_n_objects): Likewise. 2000-07-25 Damon Chaplin * gui/e-calendar-table.[hc]: new ECalendarTable to show an ETable view for Todo/Event items. * gui/task-assigned-to.xpm: * gui/task-recurring.xpm: * gui/task-assigned.xpm: * gui/task.xpm: new pixmaps (all the same at present) to go in the icon column of the ETable. * gui/event-editor.c: hid the silly 'Calendar' labels on the GnomeDateEdits and hid the times when you select 'All day event'. Also adjusted the time_t's so that when an all day event finishes on say midnight 13th May, we show 12th May in the dialog, since it implicitly includes all of that day up to midnight. * gui/dialogs/task-editor-dialog.glade: * gui/dialogs/task-editor.[hc]: unfinished dialog to edit tasks. * gui/gncal-todo.c: temporary hack so that we can use the simple dialog with our new ETable. 2000-07-23 Damon Chaplin * cal-util/calobj.h: added a few more fields. * cal-util/calobj.c (ical_object_create_from_vobject): check for a NULL return from vObjectUStringZValue for URL property to avoid SEGV. For some reason an empty 'URL:' property appears and causes trouble. 2000-07-20 Ettore Perazzoli * gui/component-factory.c (factory_fn): Update for the new `evolution_shell_component_new()' arg. 2000-07-19 Federico Mena Quintero * cal-util/cal-component.c (cal_component_alarm_set_trigger): Finish filling the trigger. What a pain, again. (cal_component_alarm_free_trigger): Implemented. 2000-07-19 Fatih Demir * conduits/calendar/calendar-conduit-control-applet.desktop: * conduits/todo/todo-conduit-control-applet.desktop: Added the Turkish desktop entries. 2000-07-18 Federico Mena Quintero * cal-util/cal-component.c (cal_component_alarm_free): Free the icalcomponent if this is an unattached alarm. (scan_alarm_property): Handle the TRIGGER property. (cal_component_alarm_get_trigger): Ditto. Royal pain. (cal_component_alarm_set_trigger): Ditto. Less pain. 2000-07-17 Federico Mena Quintero * cal-client/cal-client.c (cal_client_get_object): Fixed inline docs. (cal_client_new): Ditto. (cal_client_get_n_objects): Added inline docs. 2000-07-14 Federico Mena Quintero * cal-util/cal-component.c (CalComponentAlarm): New internal represntation for alarm components. We really don't map them to a CalComponent because it is more convenient to handle them as "child" structures. (make_alarm): New function to create a CalComponentAlarm from an icalcomponent representing a VALARM. (scan_alarm_property): New function to scan a property from an alarm component. We support ACTION. (cal_component_get_first_alarm): New function to start an iterator over the alarms in a calendar component. (cal_component_alarm_get_action): New function. (cal_component_alarm_set_action): New function. 2000-07-13 Seth Alves * conduits/todo/todo-conduit.c: conduit based on the calendar conduit. this conduit syncs a pilot's ToDoDB database to wombat's list of "todo" events. * gui/gncal-todo.c (simple_todo_editor): set todo's priority control based on value from ical object during edit. 2000-07-12 Federico Mena Quintero * gui/print.c: Revert Michael's GnomeFont patch until the gnome-print API stabilizes. 2000-07-12 Michael Meeks * gui/print.c (titled_box, print_text, print_month_small), (bound_text): GnomeFont update. 2000-07-12 Seth Alves * conduits/calendar/calendar-conduit.c: fixed various problems * cal-client/Makefile.am: build a static version of the library to link with the conduits * cal-util/Makefile.am: same 2000-07-11 Federico Mena Quintero * cal-util/cal-component.c (scan_property): Handle the COMPLETED property. (free_icalcomponent): Ditto. (cal_component_get_completed): Ditto. (cal_component_set_completed): Ditto. (scan_property): Handle the TRANSPARENCY property. (free_icalcomponent): Ditto. (cal_component_get_transparency): Ditto. (cal_component_set_transparency): Ditto. (scan_property): Handle the URL property. (free_icalcomponent): Ditto. (cal_component_get_url): Ditto. (cal_component_set_url): Ditto. * pcs/cal-factory.c (queue_load_create_job): Removed unneeded check for the URI. (load_fn): Be more paranoid about the URI and notify the listener if we got passed a bad URI. Simplify the termination code a bit. (create_fn): Likewise. (queue_load_create_job): Be more paranoid about the URI. 2000-07-10 Ettore Perazzoli * gui/Makefile.am: Remove pilot stuff for now. * Makefile.am (SUBDIRS): Remove `conduits'. 2000-07-10 Dan Winship * gui/Makefile.am (EXTRA_DIST): remove gnomecal.conduit * conduits/calendar/Makefile.am (EXTRA_DIST): We want calendar.conduit.in, not calendar.conduit. 2000-07-10 Seth Alves * gui/Makefile.am (SUBDIRS): * conduits/calendar/Makefile.am: moved calendar-conduit stuff from the gui directory to here. * Makefile.am (SUBDIRS): added conduits to SIBDIRS 2000-07-08 Ettore Perazzoli * gui/calendar-commands.c (calendar_control_activate): Remove "close calendar" command. 2000-07-08 Anders Carlsson * gui/e-week-view.c (e_week_view_on_button_press): Handle mouse wheel scrolling. * gui/e-day-view.c (e_day_view_on_time_canvas_button_press): New function to handle mouse wheel scrolling. (e_day_view_on_main_canvas_button_press): Handle mouse wheel scrolling. 2000-07-07 Federico Mena Quintero * cal-util/cal-component.c (scan_property): Handle the SEQUENCE property. (free_icalcomponent): Ditto. (cal_component_get_sequence): Ditto. (cal_component_set_sequence): Ditto. (cal_component_free_sequence): Ditto. (cal_component_set_last_modified): Removed incorrect assertion. (CalComponentPrivate): New need_sequence_inc flag. The sequence number must be incremented when certain properties change, so we store a flag that says if we need to bump it when piping the object over the wire. (free_icalcomponent): Reset need_sequence_inc. (cal_component_set_dtstart): Set need_sequence_inc. (cal_component_set_dtend): Ditto. (cal_component_set_due): Ditto. 2000-07-06 Federico Mena Quintero * cal-util/cal-component.c (scan_property): Handle the LAST-MODIFIED property. (free_icalcomponent): Ditto. (cal_component_get_last_modified): Ditto. (cal_component_set_last_modified): Ditto. (get_icaltimetype): New function to get struct icaltimetype values. (cal_component_get_created): Use get_icaltimetype(). (set_icaltimetype): New function to set struct icaltimetype values. (cal_component_set_created): Use set_icaltimetype(). * cal-util/cal-component.c (scan_property): Handle the CREATED property. (free_icalcomponent): Ditto. (cal_component_free_icaltimetype): Ditto. (cal_component_get_created): Ditto. (cal_component_set_created): Ditto. (cal_component_init): Do not create an UID here. (ensure_mandatory_properties): New function to ensure that the mandatory RFC properties are indeed in the component. If they are not, we create them on the fly. (cal_component_set_new_vtype): Use ensure_mandatory_properties(). (cal_component_set_icalcomponent): Ditto. (cal_component_get_uid): Return the UID in a parameter, not as a function return value, for consistency's sake. (scan_property): Handle the DTSTAMP property. (free_icalcomponent): Ditto. (cal_component_get_dtstamp): Ditto. (cal_component_set_dtstamp): Ditto. 2000-07-04 Damon Chaplin * gui/gncal-todo.c (gncal_todo_update): Use &obj instead of &ico in the call to cal_client_get_object(). The ToDo list should work now. * gui/event-editor-dialog.glade: set the toplevel GnomeApp to invisible so it doesn't appear and then resize. 2000-07-03 Federico Mena Quintero * cal-util/cal-component.c (cal_component_get_summary): Use CalComponentText instead of CalComponentPropSummary. Removed the latter typedef. (cal_component_set_summary): Likewise. (scan_property): Handle the CLASSIFICATION property. (cal_component_get_classification): Ditto. (cal_component_set_classification): Ditto. * cal-util/cal-component.c (cal_component_free_text_list): Renamed from cal_component_free_description_list(). We can share this function since both comments and descriptions have the same form. (scan_text): Ditto. (get_text_list): New function. (set_text_list): New function. (cal_component_get_description_list): Use get_text_list(). (cal_component_set_description_list): Use set_text_list(). (cal_component_set_uid): Add sanity check. (cal_component_get_summary): Ditto. (cal_component_get_description_list): Ditto. (cal_component_get_dtstart): Ditto. (cal_component_get_dtend): Ditto. (cal_component_get_due): Ditto. (scan_property): Handle the COMMENT property. (cal_component_get_comment_list): Ditto. (cal_component_set_comment_list): Ditto. 2000-07-02 Federico Mena Quintero * cal-util/cal-component.c (scan_categories): Handle CATEGORIES. This can appear multiple times, so we maintain a list. We compress them later to a single property with multiple values. (cal_component_get_categories_list): Ditto. (cal_component_set_categories_list): Ditto. (cal_component_free_categories_list): Ditto. (free_icalcomponent): Properly free the mappings. 2000-07-02 Federico Mena Quintero * cal-util/cal-component.c (scan_datetime): Handle date/time and timezone pairs. (scan_property): Handle DTSTART and DTEND. (cal_component_free_datetime): Ditto. (get_datetime): Ditto. (cal_component_get_dtstart): Ditto. (set_datetime): Ditto. (cal_component_set_dtstart): Ditto. (cal_component_get_dtend): Ditto. (cal_component_set_dtend): Ditto. (scan_property): Handle DUE date. (cal_component_get_due): Ditto. (cal_component_set_due): Ditto. 2000-07-01 Federico Mena Quintero * cal-util/cal-component.c (cal_component_get_description_list): Handle the DESCRIPTION property. There can be multiple descriptions with parameters each, so we deal with a list instead of a single structure. (cal_component_set_description_list): Ditto. (cal_component_free_description_list): Ditto. (scan_property): Ditto. (scan_description): Ditto. 2000-06-30 Federico Mena Quintero * cal-util/cal-component.c (cal_component_get_summary): To avoid passing a million parameters to setters/getters for properties that support parameters, we now pass client-side structures instead. Here we use CalComponentPropSummary. (cal_component_set_summary): Ditto. 2000-06-29 Christopher James Lahey * gui/component-factory.c: Make calendar die when evolution quits. 2000-06-30 Federico Mena Quintero * cal-util/cal-component.c: Change of plans. We use an icalcomponent from libical as our core representation so that we can preserve extension fields and fields that we don't (yet) support. CalComponent is just a wrapper with a nice API that provides non-iterative, random access to the ical's fields. (cal_component_destroy): Free the thing correctly. (cal_component_get_vtype): Re-implement in terms of icalcomponent. (cal_component_set_icalcomponent): New function to set the CalComponent's data from an existing icalcomponent. (cal_component_get_icalcomponent): New function. (cal_component_set_new_vtype): New convenience function to create an empty component. (scan_icalcomponent): Core scanning function. (scan_property): Another core scanning function. (cal_component_get_uid): Use the property directly. (cal_component_get_summary): Ditto. Handle the altrep parameter as well. (cal_component_set_summary): Ditto. Feel the pain, motherfucker. It is ridiculous how much code this involves. (scan_summary): Ditto. 2000-06-29 Ettore Perazzoli * gui/component-factory.c (owner_set_cb): Get an EvolutionShellClient instead of an Evolution_Shell to match the changes in libeshell. 2000-06-29 Federico Mena Quintero * gui/Makefile.am: Do not link and include the pilot stuff for the calendar component, just for the Pilot conduit. Commented out the Pilot part so that Evolution can build. Sigh, we'll have to modify gnome-pilot to use OAF. 2000-06-29 Peter Williams * gui/Makefile.am (LINK_FLAGS): Make the calendar-pilot-sync program conditional on HAVE_GNOME_PILOT, and add GNOME_PILOT_CFLAGS, GNOME_PILOT_LIBS, and PISOCK_LIBS in the appropriate places. 2000-06-29 Seth Alves * pcs/cal.c (Cal_get_uid_by_pilot_id): (Cal_update_pilot_id): * pcs/cal-backend-imc.c (cal_backend_imc_update_pilot_id): (cal_backend_imc_get_uid_by_pilot_id): * pcs/cal-backend.c (cal_backend_get_uid_by_pilot_id): (cal_backend_update_pilot_id): server code to service these: * gui/calendar-pilot-sync.c: updated to make use of cal-client. also uses dirty bits on both sides to aid in syncing. * cal-client/cal-client.c (cal_client_get_uid_by_pilot_id): new function -- ask the cal server to return uid given an object's pilot id. (cal_client_update_pilot_id): new function -- inform the cal server of an objects pilot id and pilot dirty-flag. 2000-06-28 Federico Mena Quintero * cal-util/cal-component.[ch]: New files for the new iCalendar component object. Today's properties: basic component type, UID, SUMMARY. * cal-util/Makefile.am: Added cal-component.[ch] to the list of sources. 2000-06-27 Michael Meeks * pcs/Makefile.am (INCLUDES): use BONOBO_VFS_GNOME_CFLAGS. 2000-06-26 Christopher James Lahey * gui/calendar-model.c: Added an #ifdefed value_to_string handler assignment. 2000-06-26 Federico Mena Quintero * gui/calendar-model.c (calendar_model_duplicate_value): Implement. (calendar_model_initialize_value): Implement. (calendar_model_value_is_empty): Implement. 2000-06-21 Damon Chaplin * gui/e-day-view.c (e_day_view_reshape_long_event): set event before using it! (e_day_view_init): used new colors from tigert. 2000-06-21 Christopher James Lahey * gui/e-day-view.c, gui/e-week-view.c: Remove the usage of the "x" and "y" arguments. 2000-06-21 Damon Chaplin * gui/gnome-cal.c (gnome_calendar_direction): changed so it keeps the selection range. It just moves it on one day/week etc. This makes it very handy for the keyboard shortcut code. * gui/calendar-commands.c (calendar_control_activate): fixed bug setting the radio button active. * gui/e-day-view.[hc]: added support for keyboard navigation and selection of the time range. 2000-06-20 Federico Mena Quintero * gui/calendar-model.c (calendar_model_set_value_at): Implemented. (calendar_model_is_cell_editable): Implemented. * cal-client/cal-client.c (cal_client_update_object): Take in an iCalObject instead of a stringified version. * gui/gnome-cal.c (gnome_calendar_update_object): Removed. (gnome_calendar_remove_object): Removed. (save_ical_object_cb): Use the CalClient function. * gui/e-day-view.c (e_day_view_on_delete_occurrence): Likewise. (e_day_view_on_unrecur_appointment): Likewise. (e_day_view_finish_long_event_resize): Likewise. (e_day_view_finish_resize): Likewise. (e_day_view_key_press): Likewise. (e_day_view_on_editing_stopped): Likewise. (e_day_view_on_top_canvas_drag_data_received): Likewise. (e_day_view_on_main_canvas_drag_data_received): Likewise. (e_day_view_on_delete_appointment): Likewise. * gui/e-week-view.c (e_week_view_on_editing_stopped): Likewise. (e_week_view_key_press): Likewise. (e_week_view_on_delete_occurrence): Likewise. (e_week_view_on_unrecur_appointment): Likewise. (e_week_view_on_delete_appointment): Likewise. * gui/gncal-todo.c (ok_button): Likewise. (delete_todo): Likewise. 2000-06-19 Damon Chaplin * gui/event-editor-dialog.glade: tidied up dialog a bit, adding space etc. * gui/e-week-view.c (e_week_view_reshape_events): removed debug msg. 2000-06-18 Ettore Perazzoli * cal-util/Makefile.am (INCLUDES): Include from `$(top_builddir)/libical/src/libical' too. [For the generated libical `icalversion.h' header.] * cal-client/Makefile.am (INCLUDES): Likewise. 2000-06-18 Damon Chaplin * gui/e-day-view.c (e_day_view_on_top_canvas_drag_data_received): fixed a DnD bug. 2000-06-17 Dan Winship * cal-client/Makefile.am (INCLUDES): Fix to not depend on installed ical.h 2000-06-17 Damon Chaplin * gui/e-week-view.c: added little buttons which are shown when there are more events than will fit in a day. Clicking on the button takes the user to the 1-Day view and shows the full day. * gui/e-day-view.c: * gui/e-week-view.c: set the "use_ellipsis" arg to TRUE for the EText items so we get tooltips automatically. Though we may want to use our own code to show tooltips so we can show the tips when the mouse is around the edges of the event box, and we may want to show the start and end times of the event in full. * gui/calendar-commands.c (calendar_control_activate): * gui/gnome-cal.h: added view_toolbar_buttons[] so we can access the radio buttons in the code easily. We need this if we want to jump to another view programmatically. 2000-06-16 Damon Chaplin * gui/jump.xpm: new icon for the EWeekView to jump to the day. * gui/Makefile.am (EXTRA_DIST): added jump.xpm 2000-06-16 Damon Chaplin * gui/calendar-model.c (calendar_model_class_init): #ifdef'ed out references to functions which don't exist yet, so evolution still compiles. 2000-06-16 Damon Chaplin * cal-util/test-recur.c: updated. * cal-util/cal-recur.[hc]: mostly finished, though it depends on the iCalObject struct being updated to support more of iCalendar. 2000-06-16 Damon Chaplin * pcs/.cvsignore: added icalendar-test. 2000-06-15 Damon Chaplin * cal-util/Makefile.am (test_recur_LDADD): use libical.a 2000-06-15 Dan Winship * cal-util/Makefile.am (noinst_PROGRAMS): merge the two separate noinst_PROGRAMS declarations into one so automake accepts it. (INCLUDES): include libical src dir so we don't depend on having ical.h already installed 2000-06-14 Federico Mena Quintero * gui/calendar-model.c: GPtrArray cannot insert stuff in the middle of the array (!), so use plain GArray everywhere. Sigh. 2000-06-13 Federico Mena Quintero * cal-client/cal-client.c (cal_client_get_object): Use vCalendar again. * cal-util/calobj.c (ical_object_find_in_string): From Seth, make it use vCalendar again. 2000-06-13 Federico Mena Quintero * gui/calendar-model.c (obj_updated_cb): Juggle some eggs in asynchronous fashion. Finished implementing. (obj_removed_cb): Implemented. This one needs no juggling. (calendar_model_set_cal_client): Only load the objects if we have a client. (calendar_model_destroy): Disconnect from the client's signals. * gui/Makefile.am (evolution_calendar_SOURCES): Added calendar-model.[ch] to the list of sources. * pcs/cal-backend-imc.c (cal_backend_imc_get_n_objects): Doh, return the computed value. 2000-06-13 Federico Mena Quintero * gui/calendar-model.c (CalendarModelPrivate): Added the array of objects and the hash table of UID->array index. (calendar_model_row_count): Return the length directly from the array instead of asking the Wombat. (calendar_model_value_at): Implemented. (calendar_model_new): Create an empty model. We provide a new setter function now. (calendar_model_construct): Removed function. (calendar_model_set_cal_client): New function to set the calendar client and object type at any time. This lets us reuse a calendar model object. * cal-util/calobj.h (iCalObjectField): Just report whether the object has alarms; not every single alarm. 2000-06-13 Ettore Perazzoli * gui/Makefile.am (SHELL_OBJS): Removed. (evolution_calendar_LDADD): Link with `$(top_builddir)/shell/libeshell.a'. 2000-06-09 Ettore Perazzoli * gui/component-factory.c (factory_fn): Pass NULL for the new args @create_folder_fn and @remove_folder_fn. (create_view): Updated to match the new `EvolutionShellComponentCreateViewFn'. Return `EVOLUTION_SHELL_COMPONENT_UNSUPPORTEDTYPE' if type is not "calendar". 2000-06-09 Federico Mena Quintero * idl/evolution-calendar.idl (Cal): Added a get_n_objects() method. * pcs/cal-backend.c (cal_backend_get_n_objects): New function. * pcs/cal-backend-imc.c (cal_backend_imc_get_n_objects): Implemented. * pcs/cal.c (Cal_get_n_objects): Implemented. * cal-client/cal-client.c (cal_client_get_uids): Free the ev. (cal_client_get_n_objects): Implemented. * cal-util/calobj.h (iCalObjectField): New enumeration to identify the fields in an iCalObject. 2000-06-08 Federico Mena Quintero * gui/event-editor.c (event_editor_destroy): Free the private structure. 2000-06-08 Federico Mena Quintero * cal-util/calobj.c (ical_object_to_vobject): Allow for NULL summaries. 2000-06-07 Federico Mena Quintero * gui/event-editor.c (toolbar): Added missing tooltips. We still need icons, though. 2000-06-07 Seth Alves * cal-util/calobj.c (ical_object_find_in_string): put this back in, it's still used in cal-backend-imc.c:cal_backend_imc_update_object * cal-client/cal-client.c (cal_client_get_object): instead of returning a text representation, decode the text and return an iCalObject. Also added CalClientGetStatus which indicates success or type of failure. * cal-util/calobj.c (ical_object_find_in_string): #ifed out ical_object_find_in_string since it is unused now. * cal-client/client-test.c (list_uids): track get_object change * gui/calendar-commands.c (calendar_iterate): same * gui/e-day-view.c (e_day_view_update_event): same * gui/e-week-view.c (e_week_view_update_event): same * gui/print.c (print_day_details): same (print_day_summary): same (print_todo_details): same * gui/gnome-cal.c (trigger_alarm_cb): same * gui/gncal-todo.c (gncal_todo_update): same 2000-06-06 Seth Alves * cal-util/icalendar.c, icalendar-save.c: fixed a bunch of problems * cal-util/calobj.c (ical_object_find_in_string): use libical instead of libversit (ical_object_to_string): same (dump_icalobject): prints the contents of an icalobject for debugging * gui/Makefile.am (LINK_FLAGS): link libical.a instead of libical.la so we don't have to modify the build system of the released libical * cal-client/Makefile.am (client_test_LDADD): same * cal-util/Makefile.am (icalendar_test_LDADD): same 2000-06-06 Federico Mena Quintero * cal-util/calobj.c (ical_object_destroy): Removed from the public header; made static. Now everyone should use refcounting. * pcs/cal-backend-imc.c (free_ical_object): Use ical_object_unref(). (remove_object): Likewise. 2000-06-02 Federico Mena Quintero * gui/calendar-commands.c (print): New function to call the print engine. (calendar_toolbar): Added the Print button. (calendar_control_activate): Added the File/Print item. * gui/e-day-view.c (e_day_view_get_selected_time_range): Allow start_time and end_time to be NULL. * gui/e-week-view.c (e_week_view_get_selected_time_range): Likewise. * gui/print.c (range_selector_new): Show the range selector widgets. Use the correct radio group for all of them! (print_calendar): Do the dialog box here. We may want to split this function later into smaller chunks. 2000-06-05 Damon Chaplin * gui/e-week-view-event-item.c (e_week_view_event_item_button_press): allow the right button to popup the menu, even when the event is being edited. * gui/e-week-view.c: * gui/e-day-view.c: Set the keyboard focus to the EDayView/EWeekView when the right button is clicked, so that any event being edited is saved before any action (e.g. opening the Event Editor dialog) is started. Note that this won't work if we switch to asynchronous notification. 2000-06-02 Federico Mena Quintero * gui/event-editor.c (tb_save_and_close_cb): Implemented. (toolbar): Added an icon for the Save and Close command. (save_ical_object): Recompute the title of the window here. Maybe it would be better to do it when we actually get the "object_changed" signal from the CalClient. (file_close_cb): Implemented. 2000-06-02 Federico Mena Quintero * gui/gnome-cal.c (save_ical_object_cb): Implemented. (gnome_calendar_add_object): Removed function, since it was identical to gnome_calendar_update_object(). Modified the rest of the code to use only the latter. (gnome_calendar_remove_object): Be more paranoid about the UID. (gnome_calendar_update_object): Ditto. Also, renamed this function from gnome_calendar_object_changed(), for consistency with the lower-level CalClient interface. * gui/event-editor.c (event_editor_class_init): New "save_ical_object" signal to ask that our parent store the calendar object to the backend. (save_ical_object): New function to save the calendar object, actually if just emits the signal. (file_save_cb): Implemented. (dialog_to_ical_object): We want priv-> alarm_program_run_program_entry (i.e. the entry inside the GnomeFileEntry), not the file entry itself. (dialog_to_ical_object): Only insert the recurrence ending date if the event is recurrent! 2000-06-02 Christopher James Lahey * gui/Makefile.am: Fixed EXTRA_DIST. 2000-06-01 Federico Mena Quintero * gui/gnome-cal.c (editor_closed_cb): Handler for the "editor_closed" signal of the event editor; we just destroy it then. * gui/event-editor.c (app_delete_event_cb): Callback used when the dialog is closed. Release the iCalObject here instead of the event editor's destroy handler, and emit the new "editor_closed" signal. 2000-06-01 Federico Mena Quintero * gui/event-editor-dialog.glade: Change of plans. The toplevel GnomeApp is now generated with Glade instead of being created in the program code. Otherwise we can't migrate the accelerators to the new toplevel and they won't work. * gui/event-editor.[ch]: EventEditor now derives from GtkObject. This lets us use the GnomeApp created by libglade and still have signals and stuff. * gui/event-editor.c (create_menu): Tell the UI handler that the menubar is the GnomeApp's existing one, not to create a new one. (create_toolbar): Tell the UI handler to use the GnomeApp's existing toolbar. (event_editor_focus): New function to raise/focus an event editor. * gui/gnome-cal.c (gnome_calendar_edit_object): Use event_editor_focus(). 2000-06-01 Ettore Perazzoli * gui/calendar-commands.c (calendar_control_activate): Put the toolbar into a frame to make it look like standard GNOME toolbars. Also, set `GNOME_DOCK_ITEM_BEH_NEVER_VERTICAL' so that it does not do evil things when its moved to the left or the right of the window. 2000-05-31 Federico Mena Quintero * gui/gnome-cal.h (GnomeCalendar): Added a hash table to map calendar objects to their respective event editors. * gui/gnome-cal.c (gnome_calendar_init): Create the object_editor_hash. (gnome_calendar_destroy): Free the object_editor_hash. (gnome_calendar_edit_object): New function to centralize the launching of event editors; if one already exists for a particular calendar object, we just raise its window. (edit): Use gnome_calendar_edit_object(). * gui/calendar-commands.c (display_objedit): Use gnome_calendar_edit_object(). (display_objedit_today): Likewise. * gui/e-day-view.c (e_day_view_on_new_appointment): Likewise. (e_day_view_on_edit_appointment): Likewise. * gui/e-week-view.c (e_week_view_on_new_appointment): Likewise. (e_week_view_on_edit_appointment): Likewise. * gui/event-editor.c (event_editor_new): Do not take in an iCalObject; rather provide an event_editor_set_ical_object() function. We need this because a single editor may be switched between different calendar objects. Also, do not show the event editor; leave it up to the client code. (event_editor_construct): Likewise. (clear_widgets): New function to clear the widgets to default values. (fill_widgets): New function to fill in the widgets from the iCalObject. We don't do this in init_widgets() anymore. (free_exception_clist_data): New function to free the exceptions clist data. We were leaking the row data. (init_widgets): Hook to the destroy signal of the exceptions clist. (event_editor_set_ical_object): New function. Now it also makes a copy of the calendar object for the event editor; clients do not need to copy it anymore. (event_editor_destroy): Unref the UI handler as well. (event_editor_class_init): New "ical_object_released" signal to notify the parent that we are no longer editing the calendar object. (make_title_from_ico): Handle NULL objects. * gui/event-editor.h (EventEditor): Removed fields that are no longer used. 2000-05-31 Damon Chaplin * cal-util/Makefile.am: added test-recur test program. * cal-util/test-recur.c: new file to test the recurrence code. * cal-util/.cvsignore: added test-recur. * cal-util/cal-recur.c: updated. 2000-05-30 Federico Mena Quintero * gui/event-editor.c (event_editor_construct): Create the UI handler after we have constructed the parent GnomeApp. (main_menu): Menu template is now in place. (toolbar): Tollbar template is now in place. (create_toolbar): Turn off labels in the toolbar since it sucks; it should support non-homogeneous buttons with horizontal icons and text. 2000-05-29 Federico Mena Quintero * gui/gnome-cal.c (gnome_calendar_object_changed): Removed the flags argument, since now we just proxy the calendar object to the calendar client. * gui/event-editor.c (alarm_unit_get): Moved over from event-editor-utils.c. * gui/event-editor-utils.[ch]: Removed files, since the two functions that were left there (i.e. the ones not present in e-dialog-widgets) can simply be moved to event-editor.c. * gui/Makefile.am (evolution_calendar_SOURCES): Removed event-editor-utils.[ch] from the list of sources. 2000-05-27 Federico Mena Quintero * gui/event-editor-utils.c: Moved many functions to e-util/e-dialog-widgets.c. 2000-05-25 Federico Mena Quintero * gui/event-editor-dialog.glade: Put the main notebook directly under a simple GtkWindow. We are going to pull out the notebook and slap it into our custom-built GnomeApp, anwyays. * gui/event-editor.c: Made the EventEditor derive from GnomeApp. Added a BonoboUIHandler for its menu and toolbar. (make_title_from_ico): Create a nice title for the window. (get_widgets): Fetch the Glade widgets here instead of all over the place. (event_editor_new): Temporary hack to show the dialog here, just so that I can test it. * gui/Makefile.am (EXTRA_DIST): Added the Glade messages file. 2000-05-25 Federico Mena Quintero * gui/main.c (init_bonobo): Do not initialize libglade twice. * gui/component-factory.c (create_view): Set the folder_uri property, otherwise the calendar will not get loaded into the view. 2000-05-25 Christopher James Lahey * gui/main.c: Make it so that warnings don't crash calendar. 2000-05-25 Ettore Perazzoli * gui/evolution-calendar-control.c: Removed. * gui/main.c: New. * gui/control-factory.c: New. * gui/control-factory.h: New. * gui/calendar-component-factory.c: New. * gui/calendar-component-factory.c: New. * gui/evolution-calendar-control.c (calendar_control_factory): Renamed from `calendar_factory'. (calendar_control_factory_init): Renamed from `calendar_factory_init'. * gui/Makefile.am: Link with the files from `$(builddir)/shell'. * gui/evolution-calendar.gnorba: New. * gui/evolution-calendar.oafinfo: New. 2000-05-24 Federico Mena Quintero * gui/print.c (range_selector_new): New function to create the custom range selector. (print_dialog): New function to show the print dialog. (print_calendar): Use the print dialog. 2000-05-24 Christopher James Lahey * gui/Makefile.am: Added libepaned.a. * gui/gnome-cal.c: Switched from GtkPaned to EPaned. 2000-05-22 Federico Mena Quintero * gui/calendar-commands.c (calendar_get_events_in_range): Removed function. * gui/mark.c (mark_month_item): Use cal_client_get_events_in_range(). * gui/calendar-commands.c (show_year_view_clicked): Comment out, since we don't have a year view. * gui/gnome-cal.c (setup_widgets): Removed the year view stuff. (gnome_calendar_get_current_view_name): Likewise. (gnome_calendar_update_view_times): Likewise. (gnome_calendar_direction): Likewise. (gnome_calendar_set_view): Likewise. (gnome_calendar_update_all): Likewise. (gnome_calendar_object_updated_cb): Likewise. (gnome_calendar_object_removed_cb): Likewise. (gnome_calendar_time_format_changed): Likewise. (gnome_calendar_get_current_time_range): Likewise. * gui/gnome-cal.h (GnomeCalendar): Removed the year view stuff. * gui/Makefile.am (evolution_calendar_SOURCES): Added layout.[ch], print.[ch]. Removed quick-view.[ch], year-view.[ch] since they are no longer used. Removed all the old Pilot crap. 2000-05-20 Damon Chaplin * cal-util/cal-recur.[hc]: new files to implement iCalendar recurrence rules. These are only part finished, but people may like to check that the architecture seems OK. 2000-05-17 Damon Chaplin * gui/e-day-view.c (e_day_view_on_delete_occurrence): * gui/e-week-view.c (e_week_view_on_delete_occurrence): use a copy of the iCalObject so we detect the change in the "update_event" callback. Maybe we should just update the view ourselves and then we wouldn't need to detect any change in the callback. * cal-util/calobj.c (ical_object_reset_recurrence): new function to get rid of any recurrence rules. Used when we 'unrecur' an event. * gui/e-day-view.c (e_day_view_key_press): don't add a new event if it won't fit, or we end up adding a new event for each key press. (e_day_view_update_event_label): don't update it if it doesn't have an EText item (i.e. it isn't visible). * gui/e-day-view-time-item.c: allow selection of times using this column. 2000-05-19 Federico Mena Quintero * cal-util/timeutil.c (time_add_minutes): Fixed warning message. (time_add_day): Likewise. (time_add_month): Likewise. (time_add_year): Likewise. (time_from_day): Of all functions, *this* one had to have a bug. Set the tm.tm_isdst to -1 to specify that we don't know whether the time is in DST or not. This fixes *many* bugs upstream. (time_week_begin): Likewise. We never noticed this since the week functions are never used. (time_week_end): Likewise. 2000-05-17 Seth Alves * gui/event-editor.c: hooked up more widget signals to callbacks to the gladified dialog acts more like the original one. 2000-05-16 Seth Alves * gui/event-editor.c (recurrence_toggled): hook the radio buttons to the pages of the notebook. (append_exception): (recurrence_exception_added): (recurrence_exception_deleted): (recurrence_exception_changed): code to deal with the recurrence exception list. 2000-05-15 Seth Alves * gui/event-editor.[ch]: gladeified replacement for eventedit.c * gui/event-editor-utils.[ch]: utilities used by event-editor.c * gui/event-editor-dialog.glade: glade file used by event-editor.c 2000-05-14 Federico Mena Quintero * gui/gnome-cal.c (display_notification): Use the alarm notification dialog. (display_notification_cb): New callback for the result of the alarm notification dialog. * gui/dialogs/alarm-notify.glade: New file with the alarm notification dialog. * gui/dialogs/alarm-notify-dialog.[ch]: New file. * gui/dialogs/Makefile.am: New file. * gui/Makefile.am (SUBDIRS): Added the dialogs directory. 2000-05-13 Federico Mena Quintero * gui/gnome-cal.c (trigger_alarm_cb): Better error checking, and plug leaks of str_ico and ico. * gui/evolution-calendar-control.c (main): Initialize libglade. 2000-05-13 Ettore Perazzoli * pcs/Makefile.am (INCLUDES): Add `-I$(top_builddir)/libical/src/libical'. 2000-05-12 Federico Mena Quintero * cal-util/calobj.c (generate): Use a (dtend - dtstart) offset to compute the ending time of the occurrence. This takes care of recurring events that span multiple days. Also, removed the DST condition since it did not look right at all: if you have a daily appointment at 18:00, it still should happen at 18:00 even during daylight savings. * gui/gnome-cal.c (gnome_calendar_tag_calendar): Use the timeutil functions instead of calculating the month's times by hand. Use cal_obj_instance_list_free() instead of freeing the list by hand. Clip the range we pass to mark_gtk_calendar_day(). (mark_gtk_calendar_day): Fixed off-by-one error at the end of the month by adding real day offsets. 2000-05-11 Federico Mena Quintero * gui/gnome-cal.c (add_alarms_for_object): New function to add today's alarms for a single object. (gnome_calendar_object_updated_cb): Update the object's alarms. * idl/evolution-calendar.idl (Cal): Added a get_alarms_for_object() method. * pcs/cal.c (Cal_get_alarms_for_object): Implemented method. * pcs/cal-backend.c (cal_backend_get_alarms_for_object): New function. * pcs/cal-backend-imc.c (cal_backend_imc_get_alarms_for_object): Implemented. * cal-client/cal-client.c (cal_client_get_alarms_for_object): New function. 2000-05-11 Dan Winship * gui/calendar-commands.c (calendar_control_activate): Now that we depend on current gnome-libs we can make the toolbar detachable again. * pcs/icalendar-save.c (timet_to_icaltime): remove unused timezone variable to make this compile on BSD systems (where timezone is the name of a function) 2000-05-11 Federico Mena Quintero * gui/gnome-cal.c (gnome_calendar_update_all): Removed unused arguments. Load the initial alarms here. (load_alarms): New function to load a day's worth of alarms. (gnome_calendar_class_init): Eeeek! This was taking in an incorrect argument type. (gnome_calendar_init): Now the calendar keeps a hash table of UIDs->queued alarms. Create the hash table here. (gnome_calendar_destroy): Destroy the alarms hash table. (gnome_calendar_object_updated_cb): Remove the alarms for the object and regenerate them. (gnome_calendar_object_removed_cb): Remove the alarms for the object. * gui/alarm.c (alarm_add): Do not take in a CalendarAlarm, just the trigger time, the callback and the closure data. Return an opaque identifier for the alarm so that it can be removed by the client code if needed. Use the queue_alarm() helper function. (queue_alarm): Helper function to actually queue the alarm and set up the itimer. Deal with a nonzero return value from setitimer(). (alarm_remove): New function to remove an alarm based on its ID. (pop_alarm): New helper function; pops the first alarm of the queue and resets the timer as appropriate. (alarm_ready): Simplified a lot by using pop_alarm(). * idl/evolution-calendar.idl (Cal): Added get_alarms_in_range(). * pcs/cal.c (build_instance_seq): New function to build a CORBA sequence from the internal list of instances. (Cal_get_events_in_range): Use build_instance_seq(). (Cal_get_alarms_in_range): Implemented new method. * pcs/cal-backend.c (cal_backend_get_alarms_in_range): New function with the get_alarms_in_range() engine. * pcs/cal-backend-imc.c (cal_backend_imc_get_alarms_in_range): Implemented the get_alarms_in_range() method. * cal-client/cal-client.c (cal_client_get_alarms_in_range): New client-side function for getting the alarms. (build_instance_list): New helper function to build the CalObjInstance list from the CORBA sequence. (cal_client_get_events_in_range): Use build_instance_list(). * gui/calendar-commands.h: #include . #include "gnome-cal.h". * gui/e-week-view.c: #include "calendar-commands.h" instead of main.h; the latter is an obsolete file and will be killed. * gui/evolution-calendar-control.c (main): Call init_bonobo() before anything else. We need the GTK+ object system initialized. * gui/Makefile.am (evolution_calendar_SOURCES): Do not use main.h. * cal-util/cal-util.c (cal_alarm_instance_list_free): New function. 2000-05-10 Matt Loper * gui/calendar-commands.c (calendar_control_activate): Move "about" menuitem to the help menu. 2000-05-10 Christopher James Lahey * gui/Makefile.am: Added main.h. Combined the two EXTRA_DIST sections. 2000-05-09 Christopher James Lahey * pcs/cal-backend-imc.c: Set the format when creating a new calendar. 2000-05-09 Christopher James Lahey * pcs/cal-factory.c: Removed double free of method_string in uri->method_string. 2000-05-08 Ettore Perazzoli * pcs/cal.h: Include "calendar/pcs/evolution-calendar.h" instead of "evolution-calendar.h". * pcs/cal-backend.h: Include "calendar/pcs/evolution-calendar.h" instead of "evolution-calendar.h". 2000-05-08 Seth Alves * gui/e-day-view.c (e_day_view_on_delete_appointment): call e_day_view_stop_editing_event here to avoid a divide by zero a bit further on. i'm not sure if this is the best fix for this. 2000-05-08 Federico Mena Quintero * pcs/cal-backend.h (CalBackendClass): CalBackendClass now is just an interface for calendar backends; this is an abstract class. Put in the vtable for the backend methods. * pcs/cal-backend.c (cal_backend_new): Removed function, since CalBackend is not just an abstract class. Removed implementation-specific functions and made public functions call the virtual methods instead. * pcs/cal-backend-imc.[ch]: New files with the CalBackendIMC implementation; this implements a backend for iCalendar and vCalendar files. Moved the implementation-specific stuff from cal-backend.[ch] to here. * pcs/cal-backend-imc.c (CalendarFormat): Moved enumeration to here. Added a CAL_UNKNOWN value for when the backend is not loaded yet. (cal_backend_imc_init): Initialize priv->format as CAL_UNKNOWN. (save_to_vcal): Use the same VCProdIdProp value as in cal-util/calobj.c. Use "1.0" as the VCVersionProp as per the vCalendar spec. (ensure_uid): Return nothing, since the result value need not be used anymore. (add_object): Since we mark the calendar as dirty anyways, we do not need to check the result value of ensure_uid() anymore. (remove_object): Asssert that we know how to handle the object's type. We do this in add_object() anyways. * pcs/Makefile.am (libpcs_a_SOURCES): Added cal-backend-imc.[ch]. * gui/gnome-cal.c: Replaced debugging printf()s with g_message() so that we can see the line number where they occur. * gui/gnome-cal.c (gnome_calendar_load_cb): Sort of handle the LOAD_METHOD_NOT_SUPPORTED result code, and added a default for the switch. * cal-client/cal-listener.h (CalListenerLoadStatus): Removed enumeration; it is stupid to translate all values for the CalClient when it is going to translate them again. (CalListenerClass::cal_loaded): This signal now passes the LoadStatus directly from the CORBA side. * cal-client/cal-listener.c (Listener_cal_loaded): Do not translate the status value. * cal-client/cal-client.h (CalClientLoadStatus): Added the CAL_CLIENT_LOAD_METHOD_NOT_SUPPORTED error code. * cal-client/cal-client.c (cal_loaded_cb): Translate the CORBA version of the LoadStatus result code. * pcs/cal-factory.c (CalFactoryPrivate): New methods field for the hash table from method strings to the GtkTypes for backend class types. (cal_factory_init): Create the priv->methods hash table. (cal_factory_destroy): Free the priv->methods hash table. (cal_factory_register_method): New function to register a backend class for a particular URI method. (launch_backend_for_uri): New function to launch a backend for a particular URI's method. (load_backend): Use launch_backend_for_uri(). Move the error notification code from load_fn() to here. (create_backend): Use launch_backend_for_uri(). Move the error notification code form create_fn() to here; it is #ifdefed out since currently cal_backend_create() does not have any error reporting capabilities. * idl/evolution-calendar.idl (Listener::LoadStatus): Added a PROTOCOL_NOT_SUPPORTED error code. * pcs/cal-factory.c (cal_factory_load cal_factory_create): Removed functions, since they were supposed to be internal only. (CalFactory_load): Call queue_load_create_job() directly. (CalFactory_create): Likewise. 2000-05-08 Damon Chaplin * gui/e-week-view.c (e_week_view_remove_event_cb): * gui/e-day-view.c (e_day_view_remove_event_cb): don't set the ico->uid to NULL or we won't find any other occurrences of the event. Set the editing_event_day/num to -1 instead. * gui/e-week-view-event-item.c (e_week_view_event_item_draw): fixed the positioning of the icons for long events. * cal-util/calobj.c (ical_object_normalize_summary): forgot to terminate the string. 2000-05-07 Damon Chaplin * gui/e-day-view.c (e_day_view_on_main_canvas_drag_data_received): (e_day_view_on_top_canvas_drag_data_received): show the EText item, just in case it hasn't moved, otherwise it won't appear. * gui/e-day-view.h (E_DAY_VIEW_BAR_WIDTH): increased from 6 to 8 to make it easier to drag an event. Also increased E_DAY_VIEW_GAP_WIDTH since it must be >= the BAR_WIDTH. 2000-05-07 Matt Loper * gui/evolution-calendar-control.c (PROPERTY_CALENDAR_URI): Changed to "folder_uri" from "calendar_uri". (set_prop): The uri given to us is a directory, so we append a filename onto the end before we use it. 2000-05-06 Damon Chaplin * cal-util/timeutil.c (time_day_begin): (time_day_end): changed these so they just do a simple localtime(), update the struct tm, then do a mktime(). I don't know why it used to look at the tm_isdst flags etc. From a little test program I wrote which steps through testing every hour for a year it wasn't working correctly, and the new code does. (time_add_day): also got rid of the stuff that looked at tm_isdst here. My test program now works better. 2000-05-06 Chris Toshok * gui/.cvsignore: ignore evolution-calendar.pure * gui/Makefile.am: add support for building evolution-calendar.pure 2000-05-06 Damon Chaplin * gui/e-day-view.c: * gui/e-week-view.c: finish editing event when user hits Return key. (e_week_view_on_text_item_event): stop event signals after doing any other calls, since otherwise it will also stop any other resulting event signals. * gui/e-week-view-event-item.c (e_week_view_event_item_draw): don't draw the start/end times while editing. * gui/eventedit.c: changed the Summary field to a GtkEntry, since we now only want a single line of text. * cal-util/calobj.c (ical_object_normalize_summary): new function to convert the summary field to a single line of text, by converting any sequence of CR & LF characters to a single space. (ical_object_create_from_vobject): call the above function. I think all functions that load iCalObjects go through this. (ical_new): called it here as well just in case. 2000-05-06 Damon Chaplin * gui/week-view.[hc]: removed. 2000-05-06 Damon Chaplin * gui/gncal-day-panel.[hc]: * gui/gncal-day-view.[hc]: * gui/gncal-full-day.[hc]: * gui/gncal-week-view.[hc]: * gui/layout.[hc]: * gui/view-utils.[hc]: removed old calendar view files. 2000-05-06 Damon Chaplin * cal-util/calobj.[hc]: added guint ref_count to iCalObject struct, and ical_object_ref/unref() functions. I've updated all the gui/ stuff to use ref_counts but I haven't touched the pcs/ stuff. Maybe just using ical_object_destroy() is OK there. * gui/gncal-todo.c: * gui/calendar-commands.c: * gui/eventedit.c: * gui/e-week-view.c: * gui/e-day-view.c: use refcounting for iCalObjects. * gui/e-day-view-main-item.c: * gui/e-day-view-top-item.c: * gui/e-day-view.c: try not to ever draw outside the event, even when the event is very small. 2000-05-05 Damon Chaplin * gui/e-day-view.c: don't allow recurring events to be resized or dragged, and don't show the resize/drag cursors. Actually it may be better to let the user do the resize/drag and then ask them what they want to do - change the single occurrence or the entire series. * gui/e-day-view-time-item.c (e_day_view_time_item_show_popup_menu): use e_auto_kill_popup_menu_on_hide() to destroy the popup menu. * gui/popup-menu.c: include e-gui-utils.h 2000-05-04 Damon Chaplin * gui/e-day-view.c (e_day_view_foreach_event_with_uid): for the long events pass E_DAY_VIEW_LONG_EVENT as the day. Fixes SEGV. * gui/calendar-commands.c: when we switch views, grab the focus. * gui/gnome-cal.c (gnome_calendar_tag_calendar): (gnome_calendar_mark_gtk_calendar_day): changed this so it uses cal_client_get_events_in_range(), and doesn't load any objects. Also just return if it isn't visible. * gui/calendar-commands.c (calendar_get_events_in_range): call g_list_sort() to sort the list rather than g_list_insert_sorted() for each element. It is much more efficient. Also changed it so that the co->ev_start/end fields are copied from the CalObjInstance rather than the parameters to the function (that is right, isn't it?) Also freed the list elements, and finally the list. (calendar_iterate): changed this to use cal_client_get_events_in_range since that is more efficient than getting all the uids and then loading and parsing all the events. * pcs/cal-backend.c (save): output the '... saved' message before freeing the string! * gui/gncal-todo.c (gncal_todo_update): * gui/e-week-view.c (e_week_view_update_event): * gui/e-day-view.c (e_day_view_update_event): * gui/calendar-commands.c (calendar_get_events_in_range): (calendar_iterate): free obj_string after it is parsed. 2000-05-02 Damon Chaplin * gui/calendar-commands.c (calendar_control_activate): set the active radio button here. Oops - it wasn't a Bonobo problem after all. * gui/popup-menu.c (popup_menu): added call to e_auto_kill_popup_menu_on_hide() to destroy the menu. * gui/e-week-view.c (e_week_view_show_popup_menu): * gui/e-day-view.c (e_day_view_on_event_right_click): ico->user_data isn't useful any more, since the event editor keeps its own iCalObject. So for now we make the menu commands available even when the event is being edited in the event editor. Also corrected misspellings of 'occurance' -> 'occurrence'. * gui/eventedit.c (event_editor_destroy): destroy the iCalObject. The event editor now uses its own independent iCalObject. * gui/e-week-view.c (e_week_view_on_unrecur_appointment): * gui/e-day-view.c (e_day_view_on_unrecur_appointment): create a new uid for the new single instance. I'm not sure what we should do about the creation/last modification times of the objects. * gui/e-week-view.c (e_week_view_on_edit_appointment): * gui/e-day-view.c (e_day_view_on_edit_appointment): duplicate the iCalObject before passing it to the event editor, since it will change the fields. If we don't duplicate it we won't know what has changed when we get the "update_event" callback. * gui/e-week-view.c (e_week_view_key_press): * gui/e-day-view.c (e_day_view_key_press): set the created and last_mod times of the new iCalObject. We may want to set the default alarm as well. * cal-util/calobj.c (ical_gen_uid): made this function public so we can generate new uids if necessary. 2000-05-01 Damon Chaplin * gui/gnome-cal.[hc] (gnome_calendar_get_current_time_range): new function to get the currently seleted time range form the current view. * gui/calendar-commands.c (display_objedit): use the above function to get the time for the new appointment. * gui/e-week-view.c: * gui/e-day-view.c: use a shallow copy of the ico when we update the times (when resizing/dragging). Otherwise we won't detect that the time has changed in the "update_event" callback. Also added functions to get the currently selected time range. 2000-04-30 Seth Alves * pcs/icalendar-save.c (icalcomponent_create_from_ical_object): set attendee and contact address correctly. * pcs/cal-backend.c (icalendar_calendar_load): init priv->object_hash when loading. (cal_get_type_from_filename): if file extension is .ical, consider the file an ical file. 2000-05-01 Damon Chaplin * cal-util/calobj.c (ical_object_compare_dates): new function to see if the event dates have changed (including any recurrence rules). It is used for optimization when we get the "object_changed" signal. We have to do far less work if the dates are unchanged. * gui/e-week-view.c: * gui/e-day-view.c: only draw the selection when we have the keyboard focus, since the user expects to be able to type in a new event when the selection is shown. Also keep the selection when we lose focus, but just don't show it. Also quite a few changes to cope with the new client/server architecture. * gui/e-day-view-top-item.c (e_day_view_top_item_draw): * gui/e-day-view-main-item.c (e_day_view_main_item_draw): * gui/e-week-view-main-item.c (e_week_view_main_item_draw_day): only draw the selection if the widget has the keyboard focus. * gui/gnome-cal.c (mark_gtk_calendar_day): fixed so it works with events longer than one day. And changed the code for updating events in the new views. 2000-04-27 Ettore Perazzoli * gui/evolution-calendar-control.c (init_bonobo): OAFized. * gui/main.c (main): Initialize with OAF if `USING_OAF'. * gui/evolution-calendar-control.c: New #define `CONTROL_FACTORY_ID', varying according to whether we are `USING_OAF'. (calendar_factory_init): Use `CONTROL_FACTORY_ID'. * gui/Makefile.am: Updated for OAF. * pcs/cal-factory.h: Explicitly #include "calendar/pcs/evolution-calendar.h" instead of just "evolution-calendar.h". * cal-client/cal-client.c (cal_client_construct) [USING_OAF]: Use OAF. * cal-client/client-test.c (init_corba): New function, implemented differently depending on `USING_OAF'. 2000-04-27 * pcs/cal-backend.c (cal_backend_load): fix memory leak (save_to_vcal): same (save): same (cal_backend_load): same 2000-04-26 Christopher James Lahey * cal-util/.cvsignore: Replaced libcal-util.la with *.la * pcs/.cvsignore: Added *.la and *.lo. 2000-04-25 Federico Mena Quintero * pcs/cal-factory.c (backend_last_client_gone_cb): Renamed from backend_destroy_cb. Now we use it for the "last_client_gone" signal from the backend. Also, unref the backend to destroy it. (add_backend): Connect to the "last_client_gone" signal of the backend. (cal_factory_get_n_backends): New function to query the number of running backends. * pcs/cal-backend.c (cal_backend_class_init): Register the new "last_client_gone" signal. It is emitted when the last Cal client goes away. It is used to notify the factory when a backend may be safely destroyed. (cal_destroy_cb): Emit the "last_client_gone" signal when the last client disconnects from the backend. 2000-04-25 Seth Alves * gui/e-day-view.c (e_day_view_find_event_from_ico): compare iCalObjects by their UIDs instead of by their pointers. * pcs/cal-backend.c (cal_backend_destroy): don't save on destroy. 2000-04-25 Ettore Perazzoli * cal-client/Makefile.am: Add `$(datadir)/idl'. * pcs/Makefile.am (idl_flags): Add `$(datadir)/idl'. (INCLUDES): Use `$(BONOBO_GNOME_CFLAGS)'. 2000-04-25 Seth Alves * gui/gnome-cal.c (gnome_calendar_destroy): hook for widget destroy -- used to unref the CalClient so wombat knows we are gone. (gnome_calendar_class_init): added a class init for this widget. * gui/e-day-view.c (e_day_view_update_event): allow for null ico * gui/e-week-view.c (e_week_view_update_event): allow for null ico 2000-04-24 Federico Mena Quintero * cal-client/client-test.c (main): The path to the test calendar changed when we moved stuff around. Users will have to tweak this for their CVS setup, anyways. (create_client): Create or load the calendar as appropriate. (client_destroy_cb): Exit the main loop if both clients are gone. (main): Connect to the "destroy" signal of the clients so that we can terminate the test program. 2000-04-24 Seth Alves * pcs/icalendar.c (parse_person): allow for null CN (parse_person): allow for null sent_by * pcs/Makefile.am: build icalendar-test * pcs/icalendar-test.c: a test which loads an ical file and converts it to our internal format, and then saves it back out. 2000-04-24 Damon Chaplin * gui/Makefile.am: added new source files and pixmaps, and removed old source files, which can be deleted. * gui/e-week-view-titles-item.[hc]: * gui/e-week-view-main-item.[hc]: * gui/e-week-view-event-item.[hc]: * gui/e-week-view.[hc]: new files implementing the week/month views. * gui/yearview.xpm: * gui/monthview.xpm: * gui/weekview.xpm: * gui/workweekview.xpm: * gui/dayview.xpm: new pixmaps for the toolbar buttons. These aren't intended to be the final pixmaps. * gui/calendar-commands.c: added radio buttons to the toolbar to switch between the calendar views, and moved the am_pm_flag here so we can get rid of view-utils.c. * gui/gnome-cal.[hc]: made it a subclass of GtkVBox, rearranged the widgets into 2 notebooks, and added the selection_start_time and selection_end_time fields. * gui/goto.c: updated to use new selection time range. * gui/quick-view.c: added '#include ' so it compiles. * gui/e-day-view.[hc]: changed the interface to support the new selection time range, got rid of a few debugging messages and changed a few bits. 2000-04-21 Seth Alves * pcs/icalendar-save.c: start on code to do the opposite of icalendar.c (convert from iCalObjects to libical's icalcomponents). * gui/calendar-commands.c (calendar_control_activate): moved "About Calendar" into the View menu so it shows up. 2000-04-20 Seth Alves * gui/gnome-cal.c (gnome_calendar_changed_cb): new function: callback for listener's object updated signal. (gnome_calendar_object_removed_cb): new function: callback for listener's object removed signal. (gnome_calendar_new): hook up listener's "obj_updated" and "obj_removed" signals so if evolution is running twice, they will both see changes right away. (gnome_calendar_object_changed): don't call update_all, since it will be called by the listener. (gnome_calendar_remove_object): don't call update_all (gnome_calendar_add_object): don't call update_all * gui/gncal-full-day.c (child_realize): create fullday's gcs even if pixmap_bell has already been created. this was causing crashes if the calendar was run twice. 2000-04-19 Seth Alves * gui/eventedit.c (ee_rp_init_rule): changed the order around a bit to avoid a Gtk-CRITICAL crash * gui/gncal-todo.c (gncal_todo_update): fixed code to populate the todo clist * cal-client/cal-client.c (cal_client_get_uids): don't check type against CALOBJ_TYPE_ANY since it will always match. (cal_client_get_uids): same (re: CALOBJ_TYPE_ANY) * pcs/cal-backend.c (build_uids_list): same (re: CALOBJ_TYPE_ANY) * pcs/cal.c (Cal_get_uids): same (re: CALOBJ_TYPE_ANY) * pcs/cal-backend.c (remove_object): don't call save from here because in all cases the caller of remove_object calls save * gui/calendar-commands.c (calendar_set_uri): calls gnome_calendar_open instead of checking on disk and calling load or create. * gui/gnome-cal.c (gnome_calendar_object_changed): fixed to use cal_client_update_object -- editing and dragging events works again (gnome_calendar_open): collapsed gnome_calendar_load and gnome_calendar_create into this function. added new type GnomeCalendarOpenMode which has the value CALENDAR_OPEN or CALENDAR_OPEN_OR_CREATE. * gui/evolution-calendar-control.c (calendar_properties_init): create a property bag for this control (set_prop): callback for property sets (get_prop): callback for proprety gets * gui/calendar-commands.c (calendar_set_uri): new function, called when the "calendar_uri" property is set on the calendar- control's property bag. 2000-04-18 Federico Mena Quintero * cal-util/Makefile.am (INCLUDES): Fix include path. 2000-04-16 Federico Mena Quintero * pcs/cal-factory.h (CalFactoryClass): We have a new "last_calendar_gone" signal that Wombat can use to terminate itself properly. * pcs/cal-factory.c (cal_factory_class_init): Register the "last_calendar_gone" signal. (backend_destroy_cb): Emit the "last_calendar_gone" signal instead of killing the factory. * pcs/Makefile.am: Added $(CORBA_GENERATED) to BUILT_SOURCES. (INCLUDES): Make the log domain be "wombat-pcs". 2000-04-17 Seth Alves * pcs/cal-backend.c (add_object): removed implicit save, since we don't want to save as we load from disk. (cal_backend_update_object): added a call to save, since it isn't done by add_object now. 2000-04-16 Federico Mena Quintero * cal-util/Makefile.am: Renamed library from libcalutil to libcal-util, to be consistent with libcal-client. Install header files in $(includedir)/evolution/cal-util. (INCLUDES): Add "cal-util" log domain for glib. (libcal_clientincludedir): The header files are now installed in $(includedir)/evolution/cal-client. * cal-util/cal-util.h: Fix includes. * cal-client/client-test.c: Fix includes. * pcs/Makefile.am: Create libpcs.a, not a shared library, because it is for internal use by Wombat only. The header files should not be installed, either. Removed all the old Tlacuache stuff. * gui/Makefile.am (EXTRA_DIST): We no longer distribute gncal.desktop. (evolution_calendar_INCLUDES): Add "calendar-gui" for the glib log domain. * gui/*.[ch]: Fix cal-util and cal-client includes. * pcs/Makefile.am (INCLUDES): Added "pcs" log domain for glib. * pcs/*.[ch]: Fix cal-util includes. 2000-04-11 Chris Toshok * pcs/icalendar.c (icaltime_to_timet): use HAVE_TIMEZONE to switch between linux's timezone variable and *bsd's method of getting the gmt offset. 2000-04-10 Seth Alves * pcs/cal-backend.c (save_to_vcal): create and save an actual vcalendar instead of a list of vcal objects. 2000-04-10 Damon Chaplin * gui/Makefile.am (INCLUDES): moved srcdir directories to the top so we search headers in the evolution tree before installed headers. (Otherwise when you do 'make install' lots of files in gui/ get rebuilt, since they depend on the installed cal-client.h which has just been updated.) 2000-04-09 Seth Alves * gui/gnome-cal.c (gnome_calendar_load): catch cal_loaded signal on the cal client. (gnome_calendar_load_cb): callback for cal_loaded signal. moved gnome_calendar_update_all from gnome_calendar_load to here. * gui/calendar-commands.c: minor cleanups * pcs/cal-backend.c (save_to_vcal): copied code from gnome-pim to write vcal to a file (save): filled it with more gnome-pim code (add_object): call save () after changing (remove_object): same (cal_backend_create): same (cal_backend_remove_object): same 2000-04-08 Christopher James Lahey * gui/Makefile.am: Removed linking with libetable and libeminicard since they weren't being used. 2000-04-08 Seth Alves * gui/gnome-cal.c (gnome_calendar_create): new function: friendly wrapper for cal_client_create_calendar * gui/calendar-commands.c (new_calendar): call gnome_calendar_create if no filename is provided * gui/prop.c (properties): calendar is a frame * gui/calendar-commands.c (calendar_control_activate): sort out the menus a bit, more of them show up now. * gui/Makefile.am: don't build library or test, just the bonobo control * gui/gncal-todo.c (simple_todo_editor): calendar is a frame instead of a window, now. * gui/gnome-cal.c (gnome_calendar_new): same * gui/goto.c (goto_dialog): same 2000-04-06 Seth Alves * gui/calendar-commands.c (calendar_control_activate): removed uih from the argument list, added cal. use cal as user_data in callbacks rather than the control. (calendar_control_deactivate): removed uih from argument list 2000-04-05 Seth Alves * gui/calendar-commands.c (setup_menu): removed (setup_appbar): removed (calendar_control_activate): new function -- does the work that setup_appbar and setup_menu used to do. (calendar_control_deactivate): undoes what calendar_control_activate does by removing the toolbar items and menu items. * gui/Makefile.am: build test-calendar-widget and evolution-calendar, common stuff is in a library * gui/gnome-cal.c (gnome_calendar_get_type): made the calendar widget based on a gtk_frame rather than a gnome_app * gui/calendar-commands.c: split out some of main.c * gui/evolution-calendar-control.c: bonobo bung so evolution can use the calendar widget 2000-04-01 Matt Loper * pcs/.cvsignore: Added *.lo. 2000-03-30 Seth Alves * gui/main.c (calendar_get_events_in_range): cal_client_get_events_in_range returns a list of CalObjInstance *, not a list of (char *) uid. * Makefile.am (SUBDIRS): readded the gui directory * gui/main.c: temporarily added alarm_defaults back in, since the calendar doesn't link without it 2000-03-29 Matt Loper * Makefile.am: remove the gui directory, which doesn't compile. 2000-03-28 Matt Loper * pcs/Makefile.am: create a libpcs.la library, for use in the wombat. 2000-03-28 Seth Alves * gui/Makefile.am (LINK_FLAGS): added libeutil.la and libetext.a * gui/main.c (calendar_iterate): switch from string_to_ical_object to ical_object_find_in_string (calendar_get_events_in_range): same (session_save_state): commented out references to gcal->client->filename 2000-03-27 Federico Mena Quintero * pcs/cal-backend.c (cal_backend_get_object): Use ical_object_to_string(). * cal-util/calobj.c (ical_object_to_string): Moved over from pcs/cal-backend.c (was string_from_ical_object). (get_calendar_base_vobject): Likewise, moved over from pcs/cal-backend.c. * cal-util/cal-util.c: Removed string_to_ical_object(); the correct function is in calobj.[ch], called ical_object_find_in_string(). Removed ical_object_to_string, since we now implement it in calobj.c. * cal-util/calobj.c: Removed ical_object_new_from_string(); see above. * idl/evolution-calendar.idl (CalObjInstance): Calendar object instances now contain only the UID for the object, not the whole string representation of the object. This allows clients to implement caching of objects if they wish. * pcs/cal.c (Cal_get_events_in_range): Likewise. * pcs/cal-backend.c (build_event_list): Likewise. * cal-client/cal-client.c (cal_client_get_events_in_range): Likewise. * cal-util/cal-util.h (CalObjInstance): Likewise. * cal-util/cal-util.c (cal_obj_instance_list_free): Likewise. (cal_obj_uid_list_free): Assert that the UIDs in the list are not NULL. * pcs/tlacuache.gnorba (repo_id): The calendar factory also supports the Unknown interface. 2000-03-17 Federico Mena Quintero * gui/e-day-view.c: Fix includes. (e_day_view_on_delete_occurance): Do not call save_default_calendar(). (e_day_view_on_delete_appointment): Likewise. (e_day_view_on_unrecur_appointment): Likewise. (e_day_view_finish_long_event_resize): Likewise. (e_day_view_finish_resize): Likewise. (e_day_view_key_press): Likewise. (e_day_view_on_editing_stopped): Likewise. (e_day_view_on_top_canvas_drag_data_received): Likewise. (e_day_view_on_main_canvas_drag_data_received): Likewise. 2000-03-13 Damon Chaplin * gui/e-day-view*.[hc]: new files for the Day/Work-Week views. 2000-03-12 Federico Mena Quintero * gui/main.c (gnome_calendar_locate): Removed function now that it is no CORBA server in the GUI. (save_default_calendar): Removed function. Now the personal calendar server will take care of saving modified calendars when appropriate. (close_cmd): Do not call unregister_calendar_services(). * gui/eventedit.c (ee_ok): Do not save the calendar. * gui/gncal-day-panel.c (day_view_range_activated): Likewise. * gui/gncal-todo.c (ok_button): Likewise. (delete_todo): Likewise. * gui/gncal-full-day.c (delete_occurance): Likewise. (delete_appointment): Likewise. (unrecur_appointment): Likewise. (child_focus_out): Likewise. (update_from_drag_info): Likewise. * gui/gnome-cal.c (gnome_calendar_new): Removed obsolete call to create the CORBA server. * gui/gnome-cal.h (GnomeCalendar): Renamed `calc' field to `client'. * cal-client/cal-client.h (CalClient): Removed filename and corba_server fields. 2000-03-10 Federico Mena Quintero * gui/main.c (main): Do not pass the INIT_SERVER flag to gnome_CORBA_init_with_popt_table(). Check for exceptions properly. (main): Initialize Bonobo. (main): Call process_dates() to parse the dates from the command line before we dump the events or the TODOs. (main): Use bonobo_main() instead of gtk_main(). * cal-util/calobj.c (ical_new): Initialize the alarm types here. Do not call default_alarm() anymore, since that is a GUI issue. (default_alarm): Removed function. (alarm_defaults): Removed defaults data. * pcs/tlacuache.c (calendar_notify): Removed stubs for alarm_defaults, calendar_notify(), debug_alarms. 2000-03-09 Federico Mena Quintero * gui/Makefile.am: Removed the corba-cal stuff. Commented out the Pilot conduit stuff for now. * gui/calendar.c: Random #ifdefs to make it build, although this file is going away. * gui/Makefile.am: Removed referenes to calobj.[ch] and timeutil.[ch]. * gui/calendar-conduit.c: Fixup includes. * gui/calendar-conduit.h: Fixup includes. 2000-03-09 Seth Alves * gui/gnome-cal.h: replaced "Calendar *cal" with "CalClient *calc" in the GnomeCalendar struct. * gui/*.c: tracked change from Calendar * to CalClient * gui/main.c: moved alarm_defaults from here to cal-util/calobj.c (calendar_get_events_in_range): pulled this out of calendar.c and fixed it up to use cal-client stuff. i'm not sure where to put it yet. * gui/main.c (calendar_iterate): pulled this one out of calendar.c also 2000-03-07 Federico Mena Quintero * cal-client/Makefile.am: Removed cal-client-alarm.[ch] from the list of sources. This was a miscommunication on our part. 2000-03-05 Seth Alves * cal-client/cal-client-alarm.c: stubs for client side access to alarm structures. this will probably change, since i don't know what i'm doing. * cal-util/alarm-enums.h: enums for alarms needed by both the client and the server * remaining source files in calendar/... have been moved to calendar/gui. * gui/alarm.c: start to decouple the view from the model in the alarm editing code 2000-03-03 Seth Alves * cal-util/Makefile.am: new file -- things shared between the client and server go in this directory * calobj.c calobj.h icalendar.c icalendar.h timeutil.c timeutil.h cal-util.c cal-util.h where moved backend stuff went into pcs. shared stuff went into cal-util. 2000-03-02 Federico Mena Quintero At this point the calendar client and personal calendar server files were moved to the idl/, cal-client/, and pcs/ directories. * idl/Makefile.am: New file. * cal-client/Makefile.am: New file. Moved the libcal-client stuff from calendar/Makefile.am to here. * pcs/Makefile.am: New file. Moved the tlacuache stuff from calendar/Makefile.am to here. * Makefile.am (SUBDIRS): Added the idl and cal-client directories. * calendar.h: Removed the references to cal-backend.h and its stuff. This file is going away soon! * icalendar.c: #include . Also, we don't need to include cal-backend.h or gnome.h. * icalendar.h: Protect from multiple inclusions. 2000-03-01 Federico Mena Quintero * Makefile.am: Use the gnome-config flags for orbit-idl. Create a libcal-client library with the calendar client object. 2000-02-29 Federico Mena Quintero * Makefile.am: Removed stale rule for the conduit. 2000-02-21 Matt Loper * .cvsignore: Added *.lo. 2000-02-19 Matt Loper * .cvsignore: Added tlacuache and tl-test. 2000-02-18 Miguel de Icaza * Makefile.am (INCLUDES): Use BONOBO_VFS_GNOME_CFLAGS instead of GNOMEUI_INCLUDES, as we use Bonobo and VFS. 2000-02-17 Seth Alves * cal-backend.h: moved CalendarFormat type def here * cal-backend.c (cal_backend_load): if extension suggests an ical file, attempt to load an iCal file. (cal_get_type_from_filename): returns CAL_ICAL if file extension is 'ics' or 'ifb', else returns CAL_VCAL (icalendar_calendar_load): moved this here from icalendar.c because it needs to call the static function add_object. 2000-02-17 Federico Mena Quintero * cal-client.c (cal_client_remove_object): Implemented. * cal.c (cal_notify_remove): Implemented. (Cal_remove_object): Implemented. (cal_get_epv): Fill in the remove_object field in the epv. * cal-backend.c (cal_backend_remove_object): Implemented. (notify_remove): New function to notify clients that an object was removed. 2000-02-16 Russell Steinthal * calobj.[ch], eventedit.c, main.c: Change iCalObject.organizer from char* to iCalPerson* * calobj.[ch]: Change iCalObject.related from list of char* to list of iCalRelation*; assorted related fixes * icalendar.c: interface between libical and the gnomecal internal representation 2000-02-11 Federico Mena Quintero * cal-client.c (cal_client_update_object): Implemented. * cal.c (cal_notify_update): New function to notify the listener about an updated object. (Cal_update_object): Implemented. (Cal_get_uids): set_release() the sequence to TRUE. (Cal_get_events_in_range): Likewise. * cal-backend.c (remove_object): New function to remove objects from a calendar backend. (cal_backend_update_object): New public function to update an object and notify clients about it. * evolution-calendar.idl (Cal): Added update_object() and delete_object() methods. (Listener): Removed the obj_changed method and renamed obj_added to obj_updated. We now only have updated and removed notifiers. * cal-listener.[ch]: Removed the "changed" notification code. Changed the "added" notification code to the "updated" notification. * cal-client.c: Likewise. * tlacuache.c (create_cal_factory): Connect to "destroy" on the factory and exit the main loop when the factory is destroyed. * cal-factory.c (backend_destroy_cb): New callback used when a backend is destroyed. Removes the backend from the factory's hash table and unrefs the factory if all backends go away. (add_calendar_client): Free the environment. * cal.c (cal_new): Use bonobo_object_unref() if we fail to initialize. * cal-listener.c (cal_listener_new): Likewise. * layout.c (layout_events): Plug li.partition memory leak. 2000-02-10 Federico Mena Quintero * cal-backend.c (cal_backend_add_cal): Connect to the Cal's destroy signal. (cal_backend_remove_cal): Killed function now that removal of Cal objects is done in their destroy callback. (cal_destroy_cb): New callback to remove a Cal from the backend's list of clients. Also, the backend destroys itself when there are no more clients connected to it. (save): New placeholder function to save a backend. (destroy): New function to destroy a backend's data. (cal_backend_destroy): Save the calendar and destroy it. * cal.c (cal_destroy): Reset the priv->backend to NULL. * cal-factory.c (add_calendar_client): There is no need to call cal_backend_remove_cal(); we can now just destroy the Cal object. (create_fn): Make sure we always unref the URI. (load_fn): Move the URI unref to the end of the function for safety. * cal-factory.c (add_calendar_client): Unref the Cal only if notification of the listener was unsuccessful. Otherwise, the calendar user agent (Listener side) keeps the reference. * tl-test.c (list_uids): Free the calobj. * cal-client.c (cal_loaded_cb): Use bonobo_object_unref() to get rid of the listener. (load_or_create): Likewise. (destroy_factory): New function to get rid of the factory. (destroy_listener): New function to get rid of the listener. (destroy_cal): New function to get rid of the calendar client interface object. (cal_client_destroy): Free all resources. (cal_client_get_object): CORBA_free() the calobj string. Boy, I love memprof. * cal-listener.c (cal_listener_destroy): Reset the priv->cal to CORBA_OBJECT_NIL. * cal-backend.c (cal_backend_remove_cal): Do not unref the Cal, since the calendar user agent owns it. (cal_backend_add_cal): Do not ref the Cal, since the calendar user agent owns it. * cal-factory.c (add_calendar_client): Use bonobo_object_unref() to get rid of the calendar client interface object. * calobj.c (ical_object_create_from_vobject): Duplicate the default "PUBLIC" string. 2000-02-09 Federico Mena Quintero * cal-factory.c (cal_factory_load): Added documentation comment. (load_fn): Do not print a message if the backend could not be loaded due to a non-fatal error. (queue_load_create_job): Moved the stuff from cal_factory_load() to here. Now this function serves to queue load or create requests. (cal_factory_load): Use queue_load_create_job(). (cal_factory_create): Implemented; use queue_load_create_job(). (create_fn): New job handler for creating new calendars. (create_backend): New function to create a new backend with a new calendar. (add_backend): New helper function to add backends to the factory's hash table. (load_backend): Use add_backend() instead of adding the backend by ourselves. * cal-client.c (load_or_create): Moved the functionality from cal_client_load_calendar() to here, and added an option to create a new calendar instead of loading an existing one. (cal_client_load_calendar): Use load_or_create(). (cal_client_create_calendar): Implemented. * cal-backend.c (cal_backend_create): Implemented. * evolution-calendar.idl (LoadStatus): Added an IN_USE error for create requests. * cal-listener.h (CalListenerLoadStatus): Added CAL_LISTENER_LOAD_IN_USE. * cal-listener.c (Listener_cal_loaded): Convert the IN_USE error. * cal-client.h (CalClientLoadStatus): Added CAL_CLIENT_LOAD_IN_USE. * cal-client.c (cal_loaded_cb): Handle CAL_LISTENER_LOAD_IN_USE. * tl-test.c: New test program for the calendar client side; it also exercises the server side by sending commands to it. * Makefile.am: Added the tl-test program. * tlacuache.gnorba: Updated. * tlacuache.c (create_cal_factory): Use the right GOAD id. * cal-client.c (cal_client_construct): Use the right GOAD id. 2000-02-08 Federico Mena Quintero * evolution-calendar.idl (Cal): Added get_uids() method to get a list of UIDs based on object types. * cal-backend.c (cal_backend_get_uids): Implemented get_uids() in the backend. * cal.c (Cal_get_uids): Implemented get_uids() method. * cal-client.c (cal_client_get_uids): Implemented client-side function. * cal-util.c (cal_obj_instance_list_free): Doh. Free the list, not the last link. (cal_obj_uid_list_free): New function to free a list of UIDs. * GnomeCal.idl (Repository): Removed unused method get_object_by_id_list(). This is just for cleanup purposes and to remind me exactly of what needs to be moved over to evolution-calendar.idl. (Repository): Removed unused get_objects() method. * corba-cal.c (init_calendar_repo_class): Removed the unused get_objects method. * calobj.h (CalObjFindStatus): New status value enumeration for the find function. * calobj.c (ical_object_find_in_string): New function to parse a complete calendar and find a calendar object in it. This should be used instead ical_object_new_from_string() in the future. * evolution-calendar.idl (CalObjInstance): Added an uid field. Now the idea is that whenever calendar object strings are passed around, their UIDs are passed along with them so that the actual object can be pulled from the whole VCAL object using its UID to identify it. * cal-util.h (CalObjInstance): Added uid field. * cal-util.c (cal_obj_instance_list_free): Free the UIDs. * cal-backend.c (build_event_list): Store the object's UID in the instance structure. * cal.c (Cal_get_events_in_range): Copy the UID field to the CORBA structure. * cal-client.c (cal_client_get_events_in_range): Copy the UID field from the CORBA structure. * main.c (gnome_cal_file_menu): Removed unfinished html-month stuff. * Makefile.am (gnomecal_SOURCES): Removed html-month.c. * gnome-cal.c: #include "alarm.h" (mail_notify): Made static. * alarm.h: #include "calobj.h" * corba-cal-factory.h (init_corba_server): Fixed prototype. * quick-view.c (create_items_for_event): Made static. * gncal-todo.c (column_resized): Made static. * layout.c (find_index): Made static. 2000-02-08 Federico Mena Quintero * evolution-calendar.idl (CalObjInstance): New struct to wrap instances of calendar objects for recurrencies and alarms. (Cal::get_events_in_range): New method to get ocurring and recurring events by time range. * cal-backend.c (cal_backend_get_events_in_range): New function to get a list of event instances in a time range. (string_from_ical_object): New internal function. (cal_backend_get_object): Use string_from_ical_object() instead of doing everything ourselves. (cal_backend_get_events_in_range): New function to get a list of the events that occur or recur in a specified time range. * cal-client.c (cal_client_get_events_in_range): Implemented client-side function. * cal-util.h: * cal-util.c: New files with utilities and types common to the client and server parts. (CalObjInstance): New structure to hold an instance of an actual occurrence, recurrence, or alarm trigger of a calendar object. (cal_obj_instance_list_free): New function to free a list of calendar object instances. * cal.c (Cal_get_events_in_range): Implemented new method. * corba-cal.c (cal_repo_get_updated_objects): Free `str' with free(), not g_free(), since calendar_get_as_vcal_string() uses writeMemVObject(), which uses realloc(). Fixed in gnome-pim as well. 2000-02-04 Federico Mena Quintero * cal-backend.c (get_calendar_base_vobject): New function to create the base VObject for a calendar. (cal_backend_get_object): Create the base calendar and add the sought object to it, then stringify it. * evolution-calendar.idl (Listener::obj_added Listener::obj_changed): Now these pass in just the UIDs, not the complete objects. * cal-listener.c (Listener_obj_added): Changed to pass in the uid, not the object. (Listener_obj_changed): Likewise. * cal-client.h (CalClientClass): Made the obj_added and obj_changed signals take in the UIDs, not the full objects. * cal-client.c (obj_added_cb): Likewise. (obj_changed_cb): Likewise. 2000-02-04 Federico Mena Quintero * cal-backend.c (CalBackendPrivate): Renamed the event_hash field to object_hash. Now we hash all the calendar's objects here based on their UIDs. (ensure_uid): New function to create UIDs for calendar objects that don't have them. (add_object): Ensure the object has an UID before inserting it in the calendar. (cal_backend_get_object): New function. 2000-02-03 Federico Mena Quintero * evolution-calendar.idl (Cal): Added the get_object() method. * cal-client.c (cal_client_get_object): New function to get a calendar object by its UID. * cal.c (Cal_get_object): Implemented. * cal-backend.c (cal_backend_get_object): New unfinished backend function. We need some reorganizing of how the calendar objects are stored. 2000-02-02 Federico Mena Quintero * Makefile.am (gnomecal_SOURCES): Added the CORBA generated sources. 2000-02-01 Federico Mena Quintero * cal-client.c (cal_loaded): Handle the cal_loaded signal from the listener. Store the calendar client interface object, and emit our own cal_loaded signal. (cal_client_load_calendar): Connect to the listener's signals. (cal_client_class_init): Added the "obj_added", "obj_removed", öbj_changed" signals. (obj_added_cb): Handle the signal from the listener. (obj_removed_cb): Likewise. (obj_changed_cb): Likewise. 2000-01-30 Federico Mena Quintero * Makefile.am (gnomecal_SOURCES): Added cal-client.[ch] and cal-listener.[ch]. 2000-01-30 Federico Mena Quintero * evolution-calendar.idl: Changed the namespace from GNOME::Calendar to Evolution::Calendar. (Listener::LoadStatus): Fixed SUCESSS -> SUCCESS typo. And I never noticed it in the implementation. Ain't M-/ grand? * Makefile.am: Changed ocurrences of gnome-calendar.idl to evolution-calendar.idl. * *.[ch]: Changed GNOME_Calendar_foo identifiers to Evolution_Calendar_foo. 2000-01-25 Federico Mena Quintero * cal-client.c cal-client.h: New files with the calendar client object. 2000-01-25 Federico Mena Quintero * cal-factory.c (CalFactory_load): Check that the listener is not nil and emit and exception if it is. * gnome-calendar.idl (CalFactory::load CalFactory::create): Now these raise the NilListener exception. * tlacuache.c (calendar_notify): Error stub for alarms. (alarm_defaults): Stub array. (debug_alarms): Stub variable. (main): Initialize gnome-vfs. 2000-01-24 Federico Mena Quintero * tlacuache.c: New main module for the Tlacuache personal calendar server. * tlacuache.gnorba: New gnorba file for Tlacuache, the GNOME personal calendar server. * Makefile.am: Added the stuff necessary to build Tlacuache. * cal.c (Cal_get_uri): Convert the URI to a string before returning it. * cal-factory.c (CalFactory_create): Doh, this function is void. * job.c (job_add): Use g_idle_add(), not gtk_idle_add(). 2000-01-24 Federico Mena Quintero * cal-backend.c (cal_backend_remove_cal): New function to remove a calendar client interface object from a backend. (cal_backend_load): Convert the URI to string and use Parse_MIME_FromFileName(). The conversion is not very smart, though. * cal-factory.c (load_backend): Moved most of the error handling upstream to load_fn(). (load_fn): Handle failure in case the backend could not be loaded. (cal_factory_destroy): Free the backends and the backend hash table. (add_calendar_client): Implemented. We create a Cal client interface object and attach it to the backend, and we notify the listener. 2000-01-22 Federico Mena Quintero * cal-factory.c (lookup_backend): Renamed from lookup_calendar(). Also, return a backend instead of a Cal client object. * cal-backend.c (cal_backend_load): Take in a GnomeVFSURI, not a string. * cal-listener.c (Listener_cal_loaded): Pass the load status to the signal. (cal_listener_destroy): Better error checking. (cal_listener_new): Better error checking. * cal-listener.h (CalListenerLoadStatus): New enum for the load status of a calendar. (CalListenerClass): Added the status argument to the cal_loaded signal. * gnome-calendar.idl (cal_loaded): Added a load status code. * cal-backend.h (CalBackendLoadStatus): Renamed from CalBackendLoadResult. 2000-01-18 Federico Mena Quintero * cal-backend.c cal-backend.h: Moved the calendar backend here. This is the actual calendar-handling object. (load_from_vobject): Moved over from calendar.c. Modified to use a CalBackend instead of the old Calendar structure. (add_object): Likewise. * cal.c: Now the Cal object is just a calendar client interface object; we use it as a "viewport" onto a CalBackend. This also lets us do correct resource management. * cal-common.h: New file with common forward declarations; we can't have circular dependencies between headers. 2000-01-18 Federico Mena Quintero * cal-factory.c (cal_factory_load): Queue a load job. (load_fn): Load job handler. Lookup the calendar by URI, load it if it is not loaded, or just report it to the new listener if it is. * job.c job.h: New files with a simple job queue manager. * gnome-calendar.idl (Listener::cal_loaded): Do not return the whole calendar object string. The client will be able to query the calendar for the events it needs. * cal-listener.c (Listener_cal_loaded): Ref the calendar GNOME object. We unref it when the listener is destroyed. 2000-01-17 Federico Mena Quintero The files from the gncal directory of the gnome-pim module on CVS were moved here, to evolution/calendar, in preparation for the Evolution work. The calendar is being split into a model/view architecture. The model is a personal calendar server (PAS): it provides storage, notification, and event generation; the views/controllers are the calendar user agents and things like Pilot synchronizers. 2000-01-11 Federico Mena Quintero * cal.c: Removed the CORBA listener methods, adjusted for the new IDL. * cal-listener.c (cal_listener_init): Create the private structure. In it we hold a reference to the calendar the listener is watching. (cal_listener_destroy): Destroy the private structure and unref the calendar. (Listener_cal_loaded): Stuff the calendar into our private data. (Listener_obj_added): Adjusted for new IDL. (Listener_obj_removed): Likewise. * gnome-calendar.idl: New IDL for the personal calendar server. * cal.h cal.c: New files with the calendar object. * cal-listener.h cal-listener.c: New files with the calendar listener object. * cal-factory.h cal-factory.c: New files with the calendar factory object. 2000-01-09 Eskil Heyn Olsen * Makefile.am: Changes to remove todo capplet stuff from distro. 2000-01-08 Vadim Strizhevsky * calendar-conduit-control-applet.c: Added pilotID argument to gpilotd_conduit_mgmt_new. 2000-01-05 Eskil Heyn Olsen * GnomeCal.idl: Added an argument to get_number_of_objects, so you can choose which state the object should have (any/new/modified/...). Will also add one to choose type (event/journal etc). * corba-cal.c (cal_repo_get_number_of_objects): Implemented the new version of get_number_of_objects. * calendar-conduit.c (pre_sync): Calls various gnome_pilot_conduit_standard_abs_set_num_yadayda to get progress bars. 2000-01-04 Eskil Heyn Olsen * calendar-conduit.c (start_calendar_server): Let's not call g_error, but g_warning instead. (pre_sync): Get record numbers info, total, new, deleted etc, and tell gpilotd. 1999-12-31 Eskil Heyn Olsen * eventedit.c (ee_store_recur_end_to_ical): Adds 86400 secs (1 day) to the date chooses by the user. This ensures the recurrence also occurs on that date. (ee_rp_init_ending_date): And subtracts 86400 secs when about to redisplay the box. * calendar.h: Added an argument to calendar_new, to enable certain features, such as initing alarms or nor. * calendar.c (calendar_new): Implemented support for the CALENDAR_INIT_ALARMS option to calendar_new. * corba-cal.c (cal_repo_get_updated_objects): Added CALENDAR_INIT_ALARMS to calendar_new calls. * main.c: Added CALENDAR_INIT_ALARMS to calendar_new calls. This should probably be CALENDAR_INIT_NIL, but I'm not sure, guess steintr should check it. * gnome-cal.c: Added CALENDAR_INIT_ALARMS to calendar_new calls. * calendar-pilot-sync.c: Added CALENDAR_INIT_NIL to calendar_new calls. 1999-12-10 Russell Steinthal * eventedit.c (ee_create_ae): Fix sensitivity bug when used to create default alarm box (widgets in that box should always be sensitive, even if the enabled checkbutton is not set) 1999-12-08 Eskil Heyn Olsen * calendar-conduit-control-applet.c (setSettings): Capplets now sets first_sync on enable, this should make the conduit copy old entries from the pilot to gnomecal. 1999-12-07 Eskil Heyn Olsen * calendar-conduit.c (pre_sync): Check if local store is empty. If, force slow sync. * GnomeCal.idl (GNOME): Added get_number_of_objects. * corba-cal.c (cal_repo_get_number_of_objects): implemented the get_number_of_objects. * calendar-conduit-control-applet.c (setStateCfg): Fixed bug that caused the capplet to always set the sync action to Disable upon start. 1999-12-05 Eskil Heyn Olsen * Makefile.am (Conduits_second_DATA): Also install .desktop files for conduit capplets in the gnome/apps menu dir. 1999-12-04 Eskil Heyn Olsen * Makefile.am (EXTRA_DIST): Added .desktop files to EXTRA_DIST. 1999-10-12 Clifford R. Conover * gncal-todo.c Todo List improvements. Cleaned up todo item highlighting, added support for highlighting events due today, and events not due yet. Colors are configurable on the Colors Tab of the properties window. Renamed Frame in Properties window to Colors rather then Month Colors since we are now asking for Todo item colors. Added ability to display time until todo item is due in list, it automatically selects the best denomination of time (up to weeks) and down to seconds to display. This should be made configurable in a future version. Changed Todo dialog to ask for time that event is due. This allows more accurate tracking of then the item is due, before the dialog was only asking for the date of the todo item. 1999-12-03 Eskil Heyn Olsen * calendar-conduit.c: undef DEBUG_CALCONDUT, suppresses debug output. 1999-12-02 Russell Steinthal * alarm.c: Enhanced debug support: can be toggled on and off by SIGUSR1, reports alarms which could not be added * gnome-cal.c, main.[ch], prop.c: Add snooze capability for audio and display alarms. Snooze interval can be configured in the Properties box. 1999-11-30 Eskil Heyn Olsen * calendar-conduit.c (compare): Fixed compare bug. Also neated up some of the if's in set_status. 1999-11-22 Russell Steinthal * Merged todo list coloring patch from stable * Added myself to AUTHORS, about box (per Miguel) 1999-11-22 Eskil Heyn Olsen * calendar-conduit.c (pre_sync): Writes some warning messages when pre_sync fails. 1999-11-14 Eskil Heyn Olsen * Makefile.am: Stupid misplaced endif cause gncal to depend on an install gnome-pilot... fixed... sorry. 1999-11-12 Eskil Heyn Olsen * Makefile.am (extra_pilot_bins): Fixed the if then else problem, using solution suggested by James Henstridge, appears to be caused by a (by now fixed) bug in my automake. 1999-11-12 Russell Steinthal * prop.c: Config code for timeout, make Alarms property page use a vbox instead of an hbox so that the propbox stays a reasonable width. * gnome-cal.c, main.[ch]: Add timeout for audio alarms, code to load from config file * eventedit.c: Give some static functions external linkage so they can be used elsewhere (make_spin_button); add some prototypes to appease gcc. 1999-11-11 Russell Steinthal * calendar.c (calendar_day_change): Add call to calendar_init_alarms() to schedule another day change alarm. 1999-11-09 Eskil Heyn Olsen * calendar-conduit.c: Enabled debug output. Sets a g_log_domain, now version 0.8.5. Consistent use of GSList/GList. Implemented compare, default uses one that compares the contents of a struct Appointment, but also has #ifdeffed code that does a field level comparison, not complete, but perhaps educational. * Makefile.am (#todo_conduit_control_applet_SOURCES): Fixed an unwanted conditional on libcalendar_conduit_la_LDFLAGS 1999-11-05 Eskil Heyn Olsen * calendar-conduit-control-applet.c (readStateCfg): Commented the code out, thus the capplet works again. 1999-11-04 Eskil Olsen * Makefile.am: Uses the PISOCK_LIBDIR, for people with odd install dirs for their pilot-link. Also install a pretty icon for the calendar-conduit. * calendar-conduit-control-applet.c: Modfied the try/revert/ok/cancel scheme to be more intuitive, also uses a GtkOptionMenu for the possible sync methods. * calendar-conduit-control-applet.desktop: use the nice icon... * calendar-conduit.c: Ack, had to define debug_alarms and alarm_default, otherwise they are undefined. Is gncal code messy or is this considered a way of configuring the cal engine ? Implemented delete_all syncabs methods. * calendar-pilot-sync.c: also had to declare debug_alarms and alarm_defaults, just as ugly. 1999-11-02 Russell Steinthal * prop.c: Add new alarm page to properties box * prop.c, calobj.c, main.[ch] eventedit.c: New support for default alarms, configurable in the properties box. * gnome-cal.c, prop.c, main.[ch]: add option to beep on Display alarms 1999-10-23 Russell Steinthal * calendar.c (calendar_new): Correctly initialize calendar_day_end and calendar_day_begin *before* installing day-change alarm. 1999-10-21 Russell Steinthal * alarm.c, main.c: Added alarm debugging code * main.c (open_ok): Show an error box if the user tries to open a non-existent file; fixes bug #1818 1999-10-19 Russell Steinthal * gnome-cal.c (calendar_notify): Fix typos which were causing invalid times in audio notification dialogs; fixes Bug #2561 1999-10-18 Russell Steinthal * gncal-day-panel.c (gncal_day_panel_new): Placed the various elements of the day view in paned windows so that the user can adjust the relative sizes of the daily schedule, monthly calendar, and to-do list. 1999-10-18 Martin Norbäck * gncal.desktop: Added swedish translation 1999-10-13 Eskil Olsen * Makefile.am: Hopefully the fixes the much-hated gnome-pilot dependency. 1999-10-07 Eskil Olsen * calendar.c (calendar_object_changed): moved the pilot_status = MOD up, so even a CHANGE_SUMMARY will set the modified flag. * calendar-conduit.c: more _free calls, vamped the noise on output. 1999-10-06 Eskil Olsen * *conduit*[ch]: checks return values from gpilotd_init/connect. * calender.c (vcalendar_create_from_calendar): removed a set of cleanVObject cleanStrTbl, since the freed memory that the function returned. 1999-09-27 Timur Bakeyev * timeutil.c (time_from_isodate): Use tm.gmtoff or timezone to get correct offset from UTC, according to HAVE_TM_GMTOFF or HAVE_TIMEZONE. See also 1999-07-19 Matt Martin 1999-09-27 Miguel de Icaza * month-view.c (add_event): ditto (mark_current_day): ditto (month_view_set): ditto * goto.c (goto_dialog): ditto. * gnome-month-item.c (gnome_month_item_init): ditto. * gncal-day-panel.c (gncal_day_panel_new): ditto. * getdate.c (RelativeDate): ditto. * eventedit.c (set_all_day): ditto. (ee_rp_init_rule): ditto. * calendar.c (vcalendar_create_from_calendar): ditto. * calendar-conduit.c (update_record): ditto. * calobj.c (ical_object_generate_events): Get rid of pointers to values returned from localtime, as it uses a static buffer. 1999-09-26 Eskil Olsen * corba-cal.c: the g_free that was commented out since glib said was a duplicate free, was supposed to be a free. * GnomeCal.idl/corba-cal.c: added a get_object_id_list and a get_objects_by_id_list. Latter is not done. * calendar-conduit.c: rewrote the way the conduit iterates over records. It no longers fetches all entries (since that didn't work with more then 285 entries. It now fetches the id list, and gets each record. (will be using get_objects_by_id_list to get records in amounts of 10 or so later, to reduce amount of corba calls). * calendar-conduit.c: now sets alarm parameters when transferring from gnomecal to pilot. 1999-09-23 Eskil Olsen * calendar-conduit.c: better merge of summary/description when doing ical_from_remote (update_record), also handles import from gnomecal to pilot better, and on both ways, repeat events are much better now. 1999-09-22 Eskil Olsen * corba-cal.c: commented out a g_free that glib reported as being a duplicate free. * calendar-conduit.c: got gnomecal->pilot up and runnning. 1999-02-06 Lauris Kaplinski * gncal.desktop: Added Estonian translations. 1999-09-14 Federico Mena Quintero * gncal-full-day.c (child_popup_menu): Set the data pointers for all the items. 1999-09-14 Kjartan Maraas * doc/C/gnomecal.sgml: Merge from gnome-pim-1-0. Synced with newest user-guide. 1999-09-01 Miguel de Icaza * eventedit.c (ee_create_buttons): Make the OK button the default button per Russell's suggestion. 1999-08-30 Miguel de Icaza * calendar.c (calendar_object_changed): Modify the object->last_mod field. (calendar_add_object): Ditto. Closes bug #676 * main.c (save_calendar_cmd): Fix problem in which we warned the user about the calendar being modified the first time the calendar was used. 1999-08-22 Tomas Ogren * gnomecal.gnorba: "GenericFactoy" is wrong... 1999-08-15 Miguel de Icaza * calobj.c (ical_gen_uid): Fix the hostname part. 1999-08-07 Peter Teichman * calendar-pilot-sync.c (sync_pilot): sync correctly for objects created on the pilot, but not dirty (because they have been synced with some other program in the past) 1999-07-30 Miguel de Icaza * month-view.c (month_view_init): Release points here. 1999-08-02 Peter Teichman * Makefile.am (libcalendar_conduit_la_LDFLAGS): libcalendar_conduit now installs * calendar-pilot-sync.c (sync_pilot): do deletion of appointments correctly, when they are deleted on the pilot (conduit_free_Appointment): protect against double-freeing parts of the Appointment structure (update_record): all-day events from the pilot are handled a bit more reasonably 1999-08-01 Peter Teichman * calendar-pilot-sync.c (sync_object_to_pilot): The multi-day appointment corruption bug is dead. Whoo! 1999-07-31 Peter Teichman * Makefile.am: fixed this up slightly with respect to pilot conduits 1999-07-30 Jonathan Blandford * Makefile.am (libcalendar_conduit_la_LIBADD): More autoconf-stuff 1999-07-29 Jonathan Blandford * gnome-cal.c (setup_widgets): Add scrolling to the yearview. 1999-07-28 Miguel de Icaza * calendar-pilot-sync.c: (sync_object_to_pilot): If the enddate is not set, set the repeatForever to 1. This fixes all of the birthdays problems I had. Make the code not take arguments (sync_cal_to_pilot): Nice event update information * calendar.c (calendar_new): Add Event UID hash table. (calendar_add_object): Add events to the hash table here. (calendar_remove_object): Remove events here. (calendar_object_find_event): Use the hash table here. * main.c (save_calendar_cmd): The object is already destroyed by gnome_dialog_run. * calendar-pilot-sync.c (sync_object_to_pilot): Do not turn archived bit on. * calobj.c (ical_gen_uid): Use the hostname, not the domain name. (ical_gen_uid): Add a serial number. Isodates can be small. * corba-cal.c (cal_repo_update_pilot_id): New method to update the pilot status. (cal_repo_get_updated_objects): New method. Returns a list of modified and not-sycned objects * calendar-pilot-sync.c (sync_cal_to_pilot): New function to sync from the GnomeCalendar to the pilot. (sync_object_to_pilot): Sync a single event to the pilot. (try_alarm): Alarm syncing code. 1999-07-27 Miguel de Icaza * calendar-pilot-sync.c: New file. Implements PalmPilot syncronization with the Gnome Calendar. * calobj.c (ical_object_new_from_string): New function. Creates an iCalObject from a vCalendar string that is supposed to contain only one vEvent. * calendar.c: (calendar_save): Split this routine in two. * gnome-cal.c (gnome_calendar_new): Create the corba server here. * main.c: Include gnorba.h, and corba-cal-factory.h here (close_cmd): Kill the calendar server on shutdown. * calobj.c (load_recur_yearly_day): Added a fixme comment. WE need to handle intervals in the years. * calendar.c (calendar_object_find_in_list, calendar_object_find, calendar_object_find_todo, calendar_object_find_event): New functions for looking up information. * main.c (gnome_calendar_locate): New function. * corba-cal.c (calendar_create_object): New file. Implements the corba server. * calendar.c (calendar_object_changed): Flag pilot-status as changed. * calobj.c (ical_object_to_vobject): Save pilot information for syncing. (ical_object_create_from_vobject): Load syncing information for pilot. Do it in a way compatible with KOrganizer. 1999-07-26 Miguel de Icaza * calobj.c (ical_object_create_from_vobject): Generate unique IDs on Vevents we load that lack it. WE need this for the old gnome calendar generated files (ie, before now :-). Required to sync with the Palm 1999-07-26 Miguel de Icaza * calobj.c (ical_object_create_from_vobject): Generate unique IDs on Vevents we load that lack it. WE need this for the old gnome calendar generated files (ie, before now :-). Required to sync with the Palm 1999-07-19 Matt Martin * timeutil.c (time_from_isodate): Handle the 'Z' parameter to the ISO date format to convert from GMT time. 1999-07-17 Nat Friedman * calendar.c (calendar_add_object): Copy the new UID into the iCalObject structure. 1999-07-16 Miguel de Icaza * gnome-month-item.c (gnome_month_item_set_arg): Merge fix from gnome-pim-1-0: Fixed cut&paste bug for day fontsets. 1999-07-14 Miguel de Icaza * calobj.c (ical_gen_uid): Returns a UID. (ical_object_new): Use a UID when creating an event. Should get syncing done easier. 1999-07-14 Nicholas J Kreucher * calobj.c (skip_numbers): Actually skip over the numbers. (ical_object_to_vobject): Test the proper variable for storing the proper information. 1999-07-14 Jean-Noel Guiheneuf * timeutil.c (time_add_month): Fixed the problem with next month going from a 31-day to a 30-day by adjusting the date to the closest day at the end of the month. 1999-06-07 Mike McEwan * timeutil.c (time_add_month): Tell ktime' that we don't know about daylight saving time so that it does *not* make adjustments when we traverse a DST boundary. (time_year_begin): ditto. (time_year_end): ditto. (time_month_begin): ditto. (time_month_end): ditto. 1999-06-16 Anders Carlsson * main.c (new_calendar): Realize the toplevel widget when --hidden is passed to gnomecal. This fixes a segfault. 1999-06-04 Robert Brady * gnome-cal.h, gnome-cal.c: Fix abort() problem with the year view. (Bug #1367). Thanks to Owen Cliffe for helping track it down. 1999-06-03 Miguel de Icaza * calobj.c (daynumberlist): One line bug fix from Sergey I Panov. 1999-06-02 Miguel de Icaza * view-utils.c (nicetime): Use %H instead of %k, as %k is a GNU extension, not available in other systems. 1999-06-01 Miguel de Icaza * calobj.c (daynumberlist): Work around broken software that writes a broken month-of-day as "zero". Use the dtstart date for this on this event. 1999-05-28 Miguel de Icaza * Makefile.am (install-data-local): help files be gone. They are now installed from the Docbook stuff. 1999-05-26 Russell Steinthal * gncal-todo.c main.c main.h prop.c: Added support for priorities for todo items. Doesn't do much, but you can set them and sort by them. (Use the properties box to enable them; should they be on by default?) 1999-05-25 Miguel de Icaza * main.c (parse_an_arg): Added missing break here. It was causing core dumps when invoked with --userfile. * gnome-cal.c (gnome_calendar_set_view): Add some assertions here, to pin point the bug reported on gnome-list. * calobj.c (load_recurrence): Make intervals always exist. a 0 interval is wrong. 1999-05-25 Federico Mena Quintero * year-view.c: Removed unused macro CALENDAR_HEIGHT. 1999-05-25 Federico Mena Quintero * year-view.c (idle_handler): Set the canvas scroll region here, not in size_allocate(). Also, use the correct width and height based on the allocation and the precomputed minimum width/height values. * gnome-cal.c (setup_widgets): Set the scrollbar policy of the scrolled window. * main.c (setup_appbar): Use the correct type for the appbar. * gncal-day-view.c: Removed unused function switch_to_day(). * gncal-day-panel.c (calendar_day_selected): Removed unused variable. 1999-05-25 Nat Friedman * doc/C/gnomecal.sgml: Fixed a typo. * gnome-cal.c (setup_widgets): Added a scrolled window widget into which the year view is placed. * year-view.c (CALENDAR_HEIGHT): The height of the total year view inside the scrolled window. (idle_handler): Set the height of the year view to CALENDAR_HEIGHT. (year_view_size_allocate): Set the scroll region of the year view canvas to allocation->width, CALENDAR_HEIGHT. 1999-04-25 Miguel de Icaza * main.c (dump_todo): Add --todo flag to dump the todo contents. 1999-04-19 Miguel de Icaza * gncal-todo.c (add_activated): Use same hack used in edit_activated 1999-04-16 Miguel de Icaza * gncal-todo.c (edit_activated): Kill all grabs from the CList before running the new dialog box. This fixes the problem of button-3/Edit on the todo item blocking the GUI (actually, the main window responds, but not the todo window). 1999-04-08 Miguel de Icaza * gncal-todo.c (gncal_todo_init): Make sure we can get events for button3. The code for the nice popup menu was there but was not getting invoked. 1999-04-01 Steve Murphy * calobj.c (weekdaynum): Added this routine so Monthly recurrences use the weekday field as a simple integer for a single weekday. * calobj.c (load_recur_monthly_pos): Call weekdaynum instead of weekdaylist. The interface only lets the user input a single value anyway. * calobj.c (ical_object_to_vobject): instead of code to output day names from a bit array, use instead the value as an int and output a single dayname. * calobj.c (ical_object_generate_events): first_week_day gets the day int instead of the first entry in the bit field. I inserted a fair chunk of code to avoid calling generate if the day is out of range for a month. It may be unneccessary, because mktime will turn the extra days into a valid date the next month. But not all mktimes are equal, I fear. * eventedit.c (ee_store_recur_rule_to_ical): For case 3, (Monthly), I added code to set the interval slot of the recur struct; without this value, selecting a monthly recursing, by date, would lead to an infinite loop broken only by a failure to alloc more memory. Also, in the "by position" case, both u.month_pos and u.month_day were being assigned values. This is a mistake, as they are both part of an union, and the same thing. The weekday field should get the recur_rr_month_weekday value. * eventedit.c (ee_rp_init_rule): set default day from the weekday field instead of the u.month_day field, which is really the month_pos value. * gnome-cal.c (gnome_calendar_tag_calendar): Month days start with 1, not 0; thus, setting tm.tm_mday = 0, and then calling mktime will generate a time corresponding to the end of the previous month, which may have a mday anywhere from 28 to 31. The end time just adds 1 to the month, so your end time may not cover the last few days of this month, depending on what the biggest mday of last month was. I changed it so tm_mday is set to 1 instead. 1999-03-30 Federico Mena Quintero * gncal-todo.c (convert_time_t_to_char): Made static. Make it use the full year format for strftime(). 1999-03-27 Nuno Ferreira * calobj.c: Include So that strings get translated. 1999-03-26 Tomas Ogren * prop.c (build_hours_menu): Made it respect 12/24h settings.. Doesn't show until next time you open the dialog.. yet.. 1999-03-24 Tomas Ogren * gncal-week-view.c (gncal_week_view_set): Did some i18n work * eventedit.c (get_exception_string): Did some i18n work 1999-03-24 Tomas Ogren * gncal-todo.c (gncal_todo_init): Made clist titles i18n:able * main.c (poptOption): Added which views that are possible for --view in the --help text (closes #367) * main.c (dump_events): Added (short) month to the strftime and made the strings i18n:able 1999-03-23 Tomas Ogren * gncal/calobj.c: Added 2 paranthesis.. "foobar = d / 60*60" is _NOT_ the same as "foobar = d / (60*60)" which caused heavy alarm-corruption with alarms between 2 hrs and 2 days. 1999-03-23 Nat Friedman * eventedit.c (ee_store_recur_rule_to_ical): Set the recur->interval to the value of the recur_rr_month_period spin button if the event is being set "by day." This closes bug #675 as reported by bagfors@hpc2n.umu.se. Thanks for the report! 1999-03-10 Clifford R. Conover * gncal-todo.c (simple_todo_editor): Add support for Due Date when adding a TODO item here. (column_resized): New function (init_column_sorting): New function. (todo_click_column): New function. (convert_time_t_to_char, make_overdue_todo_style): New functions. * gnome-cal.c (gnome_calendar_todo_properties_changed): New function used to update the TODO when the properties have been chagned for it. * prop.c (prop_apply_todo): Apply TODO properties. * gncal-day-panel.c (todo_list_properties_changed): Update the TODO display here. * eventedit.c (date_edit_new): Made public 1999-03-10 Craig A Soules (soules+@andrew.cmu.edu) * timeutil.c, calendar.c, calobj.c, gncal-day-panel.c: Add support for daylight time savings. 1999-02-28 Martin Baulig * gncal-full-day.c (recompute_motion): For DRAG_MOVE, DRAG_SIZE_TOP and DRAG_SIZE_BOTTOM: call child_focus_out () if the child currently has the focus. 1999-02-27 Changwoo Ryu * quick-view.c (QUICK_VIEW_FONTSET): Added Korean font to the fontset string. * mark.h (*_FONTSET): Likewise. 1999-02-23 Miguel de Icaza * calobj.c (ical_object_to_vobject): Save the owner/organizer of the event. (ical_object_create_from_vobject): Load the owner/organizer of the event. * gncal-full-day.c (delete_occurance): Assign child to data (fixes crash on "delete this occurrance"). 1999-02-22 Timur Bakeyev * calendar.c: According to configured values, use either tm.tm_zone or tzname. In last case, also declare it extern. * prop.c: langinfo.h not available everywhere. Wrapped. BTW, works fine without it. 1999-02-20 Tomas Ogren * main.c (init_username): Made use of g_get_{user,real}_name() instead of our own home-brew... 1999-02-17 Sergey Panov * gnome-month-item.c,gnome-month-item.h,goto.c,mark.h, month-view.c,prop.c,quick-view.c,year-view.c: will define fonts via fontset. Friendlier to locales that use iso8859-[^1] and koi8-r encodings. Does not solve problem for Asian languiges --- better solution is needed (e.g. standart GNOME fontstyles defined in gtkrc). 1999-02-16 Sergey Panov * main.c: Use N_() macro for color settings labels in color_props structure. 1999-02-15 Federico Mena Quintero * goto.c (goto_dialog): Indentation fixes. 1999-02-15 Tomas Ogren * goto.c: Made a private copy of what localtime() returns, to be able to keep the data after more calls to localtime(). 1999-02-11 Miguel de Icaza * main.c (save_default_calendar): New function. Saves the calendar if it is the user's default calendar * gncal-full-day.c (unrecur_appointment): * gncal-day-panel.c (day_view_range_activated): * eventedit.c (ee_ok): * gncal-todo.c (ok_button): Added autosave for the default calendar. 1999-02-09 Tomas Ogren * main.c: Removed the gtk_widget_realize call. 1999-02-06 Changwoo Ryu * gncal.desktop: Added Korean translations. 1999-02-04 Federico Mena Quintero * eventedit.c (date_edit_new): New convenience function to create a properly-configured date editor widget. 1999-02-03 Federico Mena Quintero * gncal-week-view.c (gncal_week_view_new): Make the calendar start weeks on Monday if appropriate. (gncal_week_view_time_format_changed): New function to notify the week view that the time format has changed. * gncal-day-panel.c (gncal_day_panel_new): Make the calendar start weeks on Monday if appropriate. (gncal_day_panel_time_format_changed): New function to notify the day panel that the time format has changed. * gnome-cal.c (gnome_calendar_time_format_changed): Tell the day and week views that the time format has changed. 1999-02-01 Federico Mena Quintero * eventedit.c (event_editor_init): Set the title of the event editor window. 1999-01-31 Federico Mena Quintero * gncal-day-view.c (gncal_day_view_expose): Do not remove the clipping rectangle here. * view-utils.c (view_utils_draw_events): Remove the clipping rectangle here, since the user of this function should not know about it. 1999-01-30 Miguel de Icaza * view-utils.c (view_utils_draw_events): Improve this draw routine. Now it can split the text in lines and fit as many events as possible. (nicetime): Return strings without spaces at the beginning. * gncal-day-view.c (gncal_day_view_expose): Move clip-clear operation here. 1999-01-29 Jason Tackaberry * gncal-full-day.c (child_popup_menu): if the user clicks on an event that is an occurance, the menu will allow the user to delete all occurances of this event, or just the selected occurance. (delete_occurance): added. * eventedit.c (append_exception): force the clist to select the new exception. (fixes segfault) (delete_exception): if the last exception in the clist is deleted, move the selection index up. (fixes segfault) 1999-01-28 Miguel de Icaza * main.c (parse_an_arg): Add --hidden key to hide the calendar at startup. Only works with GNOME window managers though :-( * calendar.c (calendar_day_change): Reschedule alarms for the new day. (calendar_init_alarms): Schedule an alarm for midnight to change the calendar_day_begin/calendar_day_end. * alarm.c (alarm_ready): If we reschedule, there is no need to activate any pending alarms. 1999-01-28 Federico Mena Quintero * gncal-full-day.c (child_new): Insert the summary text here. (child_focus_in): No need to raise the window, since we have Spiffo(tm) layout code. Boy, this is old code. (gncal_full_day_focus_child): Now that GtkText works better, we can avoid synthesizing a click which was causing grief, anyway. (child_button_press): Grab the focus before popping up the menu. * layout.c (find_index): Added a sanity check. * gncal-full-day.c (child_destroy): Unmap and unrealize the child before unparenting/destroying it. (child_unrealize): Unrealize the widget. What was I thinking? (child_new): Save the focus_out_event signal connection id in Child structure (in a new field). (child_destroy): Disconnect from the focus_out_event signal, since we don't want to get such an event when the widget is destroyed. (gncal_full_day_destroy): Destroy the children properly; it was leaking memory. 1999-01-27 Miguel de Icaza * main.c (save_calendar_cmd): Warn if the calendar file has changed. * calendar.c (calendar_load, calendar_save): Keep track of the modification time for the calendar file. 1999-01-20 Nat Friedman * gncal-full-day.c (gncal_full_day_key_press): Only trap printable characters such that hotkeys work. (UNSELECT_TIMEOUT): Changed to 0. Much saner behavior. * prop.c (properties): Connect gnome_help_pbox_display to the GnomePropertyBox help button. 1999-01-19 Federico Mena Quintero * quick-view.c (quick_view_do_popup): Do not grab the mouse here (it was being grabbed incorrectly, anyways). (quick_view_map_event): Grab the mouse when the window is mapped. This avoids the ugly "while (xGrabPointer () != Success)" hack. (quick_view_button_release): Handle button releases here. 1999-01-19 Tomas Ogren * main.c: do gtk_widget_realize on the toplevel window.. 1999-01-13 Federico Mena Quintero * gncal-day-panel.c (gncal_day_panel_new): Make the little calendar start up with the correct date. * gncal-week-view.c (gncal_week_view_set): Add the month to the date range display label. 1999-01-08 Nat Friedman * main.c: Converted some more stuff to use the standards. 1999-01-08 Nat Friedman * main.c (setup_appbar): New function to create the status bar. (setup_menu): Install menu hints. Menu items updated to match the standards. New Settings menu created. 1998-12-30 Jeff Garzik * gncal/calendar.c, gncal/gnome-cal.c, gncal/main.c, gncal/quick-view.c: s/g_copy_strings/g_strconcat/ 1998-12-16 Miguel de Icaza Rewrote the old and broken alarm system. It never actually worked properly. Now it works properly, and I figured a nice way to get the Audio alarm do something nicer (it is now like an alarm clock :-). * gnome-cal.c (calendar_notify): Now we take a CalendarAlarm to actually distinguish which alarm was triggered. * alarm.c (alarm_ready): The code was only activating the first alarm. Reschedule the timer upon delivery of an alarm. 1998-12-14 Federico Mena Quintero * year-view.c (idle_handler): Use the allocation size instead of the old fields in the canvas structure. * goto.c (create_days): Use gtk_widget_set_usize() instead of gnome_canvas_set_size(). * quick-view.c (setup_event_list): Likewise. 1998-12-09 Miguel de Icaza * gncal-todo.c (simple_todo_editor): Use gnome_dialog_set_parent. * goto.c (goto_dialog): ditto * prop.c (properties): ditto. 1998-11-23 Miguel de Icaza * eventedit.c (ee_rp_init_exceptions): Update GtkClist usage. 1998-11-23 Andrew T. Veliath * gncal-day-panel.c (gncal_day_panel_new): Use gtk_scrolled_window_add_with_viewport instead of gtk_container_add (gtk changes). 1998-11-23 Herbert V. Riedel * eventedit.c: use GPOINTER_TO_INT * gncal-todo.c: same. 1998-11-22 Matthew Wilson * main.c: Fixed the popt event parsing callback to have the correct number of arguments. This stops it from segfaulting. 1998-11-16 Federico Mena Quintero * eventedit.c (ee_classification_widgets): Doh. Fixed stupid bug where the classification buttons were not being set correctly. (ee_store_general_values_to_ical): Take into account the fact that radio group lists are stored in reverse order of insertion. * gncal-todo.c (gncal_todo_init): Use a scrolled window to put the clist into. 1998-11-11 Miguel de Icaza * calendar.c (calendar_save): Backup the old file before saving the caledar. 1998-11-06 Miguel de Icaza * calobj.c: Add ctype.h 1998-10-31 Federico Mena Quintero * gnome-cal.c (gnome_calendar_direction): Add the offset from the beginning of the current time unit (day/month/etc), otherwise it does not work right, for example, you are on the 31st day of a month and the next month is a 30-day one and you jump to the next month. 1998-10-16 Federico Mena Quintero * month-view.c: Changed a lot of stuff not to use the layout code -- the month view's days are too small to display layout usefully. Now they display a little list of the events in each day. We also have a popup menu for the days in the month view. * calendar.c (calendar_get_objects_in_range): Reverse the list so that it is returned in increasing order. * eventedit.c (event_editor_new_whole_day): New public function to create an event for the complete span of day_begin to day_end. * year-view.c (new_appointment): Use event_editor_new_whole_day(). * year-view.c (yv_popup_menu): Mark strings for i18n. 1998-10-12 Ji Lee * eventedit.c (ee_store_recur_rule_to_ical): The interval was never being loaded from the spin button. 1998-10-09 Federico Mena Quintero * month-view.c (month_view_update): Create a list of children and lay them out nicely. Lots of functions added for this purpose. (adjust_segment): Main event segment adjustment routine. (adjust_children): Adjusts all the children in the month view. (child_create_segments): Creates the segments for a particular event. (layout_children): Uses the generic layout engine to organize the children. 1998-10-08 Federico Mena Quintero * gncal-todo.c (clist_row_selected): Set the sensitivity of the edit/delete buttons. (gncal_todo_update): Likewise. Thanks to Dirk Luetjens for the bug report. * layout.c: Do some cleanup; now we pass a struct with the layout algorithm's state instead of passing a trillion parameters around. * gncal-full-day.c (layout_children): Use the new generic layout engine. (child_compare): Sort keys are start time then end time, not just start time. This produces somewhat nicer results for the layout algorithm. The new layout code uses a partition of the time range occupied by the events, rather than using a fixed time granularity. This is better since the different parts of the program that use the layout module will have different semantics regarding snapping the event bounds to a fixed "time grid". 1998-10-07 Federico Mena Quintero * layout.[ch]: New files that abstract the event layout code from gncal-full-day.c into something useful for other parts of the program. Now all event layout is done here. * Makefile.am (gnomecal_SOURCES): Added layout.[ch] to the list of sources. 1998-10-07 Carsten Schaar * main.c (main): Replaced the 'gnome_client_new_default' call with 'gnome_master_client'. 1998-10-02 Federico Mena Quintero * timeutil.c (time_day_begin): Changed name from time_start_of_day() to be consistent with the other begin/end functions. (time_day_end): Likewise. * calobj.c (ical_object_get_first_weekday): New public function to get the first toggled day in a weekday mask. Since we do not support multiple weekdays in a monthly-by-pos rule, we just fetch the first toggled one. (ical_object_generate_events): Added a missing break statement. * timeutil.c (time_month_end): Made it consistent with the rest of the time begin/end functions -- now it returns the first second of the *next* month. (time_week_end): Actually implemented this function. It will be used when the week view is rewritten. * calobj.c (time_in_range): Fix off-by-one in the comparison of the time against the end time. * gncal-full-day.c (expand_space): Fixed bug where the columns not were being expanded due to a missing "slot + j". 1998-10-01 Federico Mena Quintero * month-view.c (month_view_init): Use the font #defines. (month_view_new): Set the colors of the month view upon creation. (mark_current_day): New function to mark the current day in the month view. (month_view_set): Mark the current day. (month_view_colors_changed): Mark the current day and colorify the month item appropriately. * month-view.h: Added year and month fields to the MonthView structure. * main.c: Renamed the Appointments color property, since it will be used by the month view as well. * goto.c (update): Set the current day's font and color. * year-view.c (year_view_init): Set the fonts of the month items when creating them. * mark.h: Added new #defines for HEADING_FONT and TITLE_FONT. * year-view.c (year_view_init): Use the new font #defines. * prop.c (prop_apply_colors): Fixed to work with the I-am-paranoid-and-I-need-to-size-my-ints changes to GnomeColorPicker. (color_spec_from_picker): Likewise. 1998-09-30 Federico Mena Quintero * goto.c (create_days): Colorify the month item and prepare it for prelighting here. * main.c (color_props): Changed the default colors to something not dull. * year-view.c (compute_min_size): New function to compute the minimum size of the year view properly. (year_view_size_request): Added two new fields to the year view structure that contain the minimum size. Return this in the size_request method. (year_view_new): Call compute_min_size to save the minimum size for later use. (idle_handler): Make it resize the items correctly. * gnome-month-item.c (gnome_month_item_set_arg): Reshape when necessary. This is needed becaues we now actually calculate a minimum size for the month item based on the font sizes and paddings. (check_heading_sizes): New function to calculate a minimum size based on the headings' dimensions. (check_day_sizes): New function to calculate a minimum size based on the day number labels' dimensions. (check_sizes): New function that computes a minimum size for the month item. (reshape): Now calls check_sizes() to ensure a minimum size for the month item. * year-view.c (mark_current_day): New function to mark the current day in the year view. * mark.c: Removed mark_current_day from here. 1998-09-29 Federico Mena Quintero * prop.c (fetch_color_spec): Changed name from fetch_prelight_spec and made it conform to the new prelighting mechanism. (fake_mark_days): Set the proper day attributes. (reconfigure_month): Use colorify_month_item(). (fake_mark_days): Use mark_month_item_index(). * mark.c (colorify_month_item): New public function to reset the colors in a month item. (get_attributes): New internal function that creates an array of attributes for the days in a month item. This is the basis of all the new optimizations to month item marking. (unmark_month_item): Now it uses the attributes array to unmark only the days that need unmarking. (mark_event_in_month): Update the day attributes array. (month_item_prepare_prelight): Changed the definition of the prelight color query function. Use the new function. (day_event): Do color changes based on the day attributes array. (mark_month_item_index): New public function to mark a single day by index. (mark_event_in_month): Use mark_month_item_index(). * gnome-month-item.c (gnome_month_item_num2child): Now takes an int, not a GnomeMonthItemChild. (gnome_month_item_child2num): Now returns an int, not a GnomeMonthItemChild. (gnome_month_item_num2day): Now takes an int, not a GnomeMonthItemChild. * goto.c (goto_dialog): Create the days before the year spin button, because the year_changed callback expects the month item to be created. The new semantics of the spin button cause it to emit a value_changed signal on the adjustment upon creation -- is this the behavior we want from it? (goto_dialog): Use gtk_window_set_modal() instead of the deprectaed gnome_dialog_set_modal(). * quick-view.c (quick_view_new): Make it look not as crappy by putting the title inside the frame. (quick_view_do_popup): Fixed the pointer grab and added a cursor. (create_items_for_event): Query the text width/height from the text item using the new object arguments, so that the size of the popup window can be set properly. * year-view.c (do_quick_view_popup): Calculate a nice date string for the popup window. 1998-09-28 Federico Mena Quintero * quick-view.[ch]: New file that presents a quick view of the events in a particular day when the mouse is clicked on the year view. Work in progress. * year-view.c (do_quick_view_popup): New function that creates a quick view for the events in a day. * Makefile.am (gnomecal_SOURCES): Added quick-view.[ch] to the list of sources. 1998-09-27 Federico Mena Quintero * main.c: Hotkey for File/Exit should be C-q, not C-x. 1998-09-24 Federico Mena Quintero * year-view.c (do_popup_menu): New function to execute the popup menu in the year view. (day_event): Invoke the popup menu with the context set to days. (new_appointment): New function to create a new appointment from the year view. (do_jump): New function to do the appropriate view/date jumping from the popup menu. * main.c: Fixed two icons in the File menu. 1998-09-21 Federico Mena Quintero * main.c: Added underlined shortcuts and accelerators to the main menu. 1998-09-16 Raja R Harinath * gncal-week-view.c (): Include. * gncal-week-view.h (): Include. 1998-09-06 Miguel de Icaza * gnome-cal.c (mail_notify): Fixed the bug reported about the mail notification not beint sent until the program was terminated. 1998-09-03 Federico Mena Quintero * gncal-full-day.c (gncal_full_day_forall): Updated foreach -> forall from Gtk changes, bleah. * year-view.c (day_event): New function to handle events from days. Jumps to the day that is clicked. * main.c: Use a watch cursor while the previous/today/next functions are doing their job. * mark.c (month_item_prepare_prelight): New public utility function to prepare a month item for prelighting. It will store the proper prelight information and attach the appropriate signals. (mark_current_day): Make the current day bold as well (useful for color-blind people, I guess). * prop.c (set_current_day): Reset the date in the sample calendar and mark the current day. (fake_mark_days): Mark fake events in the sample calendar. * year-view.c (year_view_set): Use the general prelighting engine. * goto.c (day_event): Just process button presses, as prelighting is done behind the scenes now. (update): Use the general prelighting engine. * prop.c (create_colors_page): We can now configure the colors of the monthly calendars! Wheeeeee! There are still some nits to be fixed, which are listed in the TODO file. (build_color_spec): New function to build color specifications. (parse_color_spec): New function to parse color specifications. * mark.c: Modified all functions to use the configured colors. * goto.c: Likewise. * main.c (colors_changed): New function that notifies all calendars that colors have changed. * gnome-cal.c (gnome_calendar_colors_changed): New function that notifies all the views that the colors have changed. * month-view.c (month_view_colors_changed): New function that notifies the month view that colors have changed. * year-view.c (year_view_colors_changed): New function that notifies the year view that colors have changed. * gnome-month-item.h (struct _GnomeMonthItem): Added fields for outline and day box colors. * gnome-month-item.c (gnome_month_item_set_arg): Added outline_color, outline_color_gdk, day_box_color, and day_box_color_gdk arguments to month items. These are convenient to quickly set the colors of the month item. (gnome_month_item_get_arg): Likewise. * main.[ch]: Added a global array of structures for color preferences. 1998-08-31 Federico Mena Quintero * goto.c: Small code cleanup. (day_event): Upon receiving a LeaveNotify event, Reset the day's background to the correct color. 1998-08-29 Federico Mena Quintero * mark.[ch]: New files with utility functions to mark calendars with their events. * mark.c (mark_month_item): New public function to mark a month item with events. (unmark_month_item): New public function to unmark all the days in a month item to their default appearance. * year-view.c (year_view_set): Use the new unmark_month_item() and mark_month_item() to mark the months with events. * goto.c (update): New function that updates the calendar in the Go-to dialog by marking the days. * timeutil.c (time_year_begin): Modified to take a time_t value. (time_year_end): Likewise. (time_month_begin): Actually implemented this function, which was in the header file but not here. (time_days_in_month): New public function that returns the number of days in a month. * Makefile.am (gnomecal_SOURCES): Added mark.[ch] to the sources. * year-view.c (unmark_days): Use unmark_month_item(). * gncal-full-day.c (gncal_full_day_destroy): Fixed crash when destroying the full day view. The full day's destroy method is unusual in that it destroys the list of child widgets itself, as it does not have a remove method, so it needs to reset the list to NULL. 1998-08-27 Federico Mena Quintero * gnome-month-item.c (build_month): Now does the correct thing when the user wants weeks to start on Monday. Now all the Monday special casing, as far as day numbering is concerned, is only in this function. * year-view.c (mark_days): This function marks the days that have events in them. It also fixes a memory leak in the old implementation (it was leaking the whole list). (unmark_days): New function used to unmark all the days in the year view. (mark_event): New function that marks all the days that are spanned by a time range. It also fixes the bug in the old implementation where it could possibly mark days past the ends of the year (if the event crosses year boundaries, for example). * timeutil.c (time_year_begin): Take the year parameter since year 1, not 1900. (time_year_end): Likewise. * year-view.c (year_view_size_allocate): Now changing the size of the calendars is done in the idle loop. (idle_handler): This function actually does the resizing of the items. * year-view.h (struct _YearView): Added idle_id and need_resize fields. 1998-08-26 Federico Mena Quintero * year-view.c: Beginning of the new year view. Sizing and event marking needs to be finished. * gnome-cal.c: Updated for year-view. (gnome_calendar_time_format_changed): Use year_view_time_format_changed(). * year-view.[ch]: Renamed the gncal-year-view.[ch] files to year-view.[ch]. * Makefile.am (gnomecal_SOURCES): Updated year-view.[ch] in the list of source files. 1998-08-25 Federico Mena Quintero * goto.c (create_days): Set the heading color of the month item. * main.c: Use GNOME_STOCK_PIXMAP_JUMP_TO, now that it exists, instead of goto.xpm. Also, removed goto.xpm from cvs. * gnome-month-item.h (struct _GnomeMonthItem): Added fields for the heading and day number fonts. Added fields for heading and day number label colors. * gnome-month-item.c (gnome_month_item_class_init): ARG_DAY_NAMES should be write-only. Also, added arguments for heading and day number fonts. Added arguments for heading and day number colors. 1998-08-24 Federico Mena Quintero * prop.c (build_two_radio_group): Doh. Set the state of the radio buttons properly. * month-view.c (month_view_time_format_changed): New public function that notifies the month view of a time format change. * gnome-cal.c (gnome_calendar_time_format_changed): New public function that notifies the calendar of a time format change. * main.c (time_format_changed): Use gnome_calendar_time_format_changed(). * month-view.c (month_view_update): New public function to update the month view when an event changes. This is still unfinished. (month_view_set): New public function to set the month in the month view. * gnome-cal.c (gnome_calendar_direction): Add case for month view. (gnome_calendar_set_view): Likewise. (gnome_calendar_update_all): Likewise. * timeutil.c (time_add_week): Implemented the time_add_week() function, which was on the header file. (time_add_month): Added public month-adding routine. * gnome-cal.c (gnome_calendar_get_current_view_name): Add case for month view. (gnome_calendar_goto): Likewise, and set the time on the month view. * month-view.c (month_view_new): Now it takes the calendar plus the time_t representing the month. * gnome-month-item.h: Added documentation on the object arguments for the month item. * month-view.c (month_view_init): Added a month/year heading to the month view. * TODO: Updated the TODO list a bit. * main.c (gnome_cal_file_menu): The preferences menu option should go in the File menu. (gnome_cal_edit_menu): Added stock pixmaps to the menu items. (gnome_cal_menu): Renamed the Calendar menu to Edit. (gnome_cal_help_menu): Use "About Gnomecal", not just "About". * prop.c (hour_activated): Notify the property box that it has changed. * main.c: Changed the Properties menu item to Preferences. These are global application preferences, not a single calendar's properties. * prop.c (prop_apply): Save the week_starts_on_monday flag to the configuration file. (properties): Added a check button for weeks starting on Monday. (properties): Beautified the Preferences dialog. * month-view.c (month_view_init): * goto.c (create_days): Set the month item to start weeks on Monday if appropriate. * main.c (init_calendar): A boolean is not an hour, so don't range_check_hour() on it. (init_calendar): Added a global week_starts_on_monday flag. * main.h: Added global week_starts_on_monday flag. 1998-08-21 Miguel de Icaza * calobj.c (ical_object_create_from_vobject): If mail alarm or program alarm are missing the action, then set an empty default. 1998-08-18 Federico Mena Quintero * gnome-month-item.c (gnome_month_item_day2index): New public function to get the displayed day index of the specified date. * gnome-cal.c (gnome_calendar_goto_today): New public function to jump to the current day. * goto.c (day_event): Jump to the selected day when the user clicks the mouse, and prelight days as appropriate. * timeutil.c (time_from_day): New public function to build a time_t from a year/month/day triplet. * gnome-month-item.c (gnome_month_item_num2child): (gnome_month_item_child2num): New public functions to convert an index into a child and vice-versa, respectively. (gnome_month_item_num2day): New public function to convert a child number into a displayed day number. * goto.c (goto_dialog): Doh, use gnome-dialog properly :-) * gnome-month-item.c (create_items): Use g_strdup()ed day names from the start. 1998-08-17 Federico Mena Quintero * main.c (gnome_toolbar): Made it use goto.xpm. * Makefile.am (EXTRA_DIST): Added goto.xpm to the list of files. 1998-08-13 Federico Mena Quintero * gnome-month-item.c (gnome_month_item_set_arg): Doh. Actually recalculate the days using the month and year. * main.c: Added "Go to" button to quickly jump to a specific date. * goto.c: New file that defines the quick go-to date dialog. * Makefile.am (gnomecal_SOURCES): Added goto.c to the sources. 1998-08-11 Nuno Ferreira * main.c (new_calendar): Made title i18n friendly. This was bug #215. * eventedit.c (ee_store_recur_end_to_ical): Set recur->enddate to recur->_enddate, not to itself, when adding recurring event and supplying an end date. This fixes (at least part of) bug #99. 1998-08-10 Federico Mena Quintero * month-view.[ch]: Start of the month view widget. This will use the generic month item and extend it to have the semantics desired for the gnomecal month view. * gnome-month-item.[ch]: New generic canvas item for the month view and the "small calendars". This is intended to be a high-level display engine for monthly calendars. This is a work in progress. * gnome-cal.h (GnomeCalendar): Added a month_view field. * gnome-cal.c (setup_widgets): Create the month view and insert it into the notebook. * Makefile.am: Added month-view.[ch] and gnome-month-item.[ch] to the sources. 1998-08-03 Federico Mena Quintero * main.c (about_calendar_cmd): Use an array of const strings to keep gcc happy. * alarm.c (alarm_compare_by_time): Use gconstpointer to keep gcc happy. * calendar.c (calendar_object_compare_by_start): Likewise. * gncal-full-day.c (child_compare_by_start): Likewise. 1998-07-07 Miguel de Icaza * main.c: Add support for --view flag. (session_save_state): Save the view mode; (new_calendar): Now takes a view mode flag. * gnome-cal.c (gnome_calendar_get_current_view_name): New function for enhancing the session management support for gnomecal. (gnome_calendar_set_view): New function that makes a given page active. 1998-07-01 Nuno Ferreira * gncal.desktop: Added Portuguese translation. Mon Jun 22 13:01:16 1998 Havoc Pennington * main.c (session_save_state): Use gnome_geometry_string to get the geometry string. 1998-06-04 Federico Mena Quintero * eventedit.c (ee_rp_init_rule): Do not subtract 1 from tm->tm_mday for the default_day. * gnome-cal.c (gnome_calendar_new): (gnome_calendar_goto): Use the start of the day -- things expect it to be that way. 1998-05-27 Nuno Ferreira * eventedit.c (ee_store_recur_rule_to_ical): Fill in ical->recur->interval from value in spin_button. This ixed an infinnite loop. 1998-05-30 Federico Mena Quintero * gncal-full-day.c (child_draw): Paint the decorations correctly. (child_draw_decor): Paint the recurrence/bell icons correctly. 1998-05-25 Miguel de Icaza * eventedit.c (ee_rp_init_rule): Use the contents of ee->ical->dtstart for computing the predefined values of the recurrence. * gncal-full-day.c (gncal_full_day_unrealize): Fix the gc destruction in the unrealization code and fix the pixmap unrefing. * main.c (close_cmd): Remove a bad hack that disabled calendar widget destruction. * calobj.c (ical_object_generate_events): Fix for the weekly event generation. Was reported on the bug tracking system. 1998-05-18 Miguel de Icaza * gncal-full-day.c (layout_children): Implemented ultra-cool layout for the events that share the same time range. Gals and guys you can now drop Outlook on the recycle bin. Which reminds me. We do not have a recycle bin. How could that happen in a project as cool as this one? Someone explain this to me. 1998-05-18 Federico Mena * gncal-full-day.c (paint_back): Eliminated unnecessary border repainting. Sun May 17 17:55:03 1998 Havoc Pennington * gncal-todo.c (simple_todo_editor): Close dialog when return is pressed. 1998-05-15 Miguel de Icaza * gnome-cal.c (mark_gtk_calendar_day): Bug free version of the range computation in place. * gncal-year-view.c (year_view_mark_day): Use the same new version of the range computation here. * calobj.c (ical_object_generate_events): Fix the begin/end condition. 1998-05-14 Miguel de Icaza * timeutil.c (isodate_from_time_t): Do not add the spurious padding. * calobj.c (store_date_list): Bug fix: I was using the wrong pointer when saving the exception date list. (set_date_list): Bug fix: load correctly the complete exception date list. (set_date_list): Use ',' for the exception date separator as the versit people can not get their standard right. * gncal-full-day.c (unrecur_appointment): Support for making an existing recurrent event `movable' for a day. * calobj.c (ical_object_add_exdate): New routine, used to add exception dates. (ical_object_duplicate): New routine: used to do the magic recur->no-recur event. 1998-05-08 Miguel de Icaza * gncal-full-day.c (new_appointment): Use gtk_calendar freeze/thaw * gncal-year-view.c (gncal_year_view_set_year): Use gtkcalendar freeze/thaw. * eventedit.c (event_editor_init): Use gnome_dialog_set_close to avoid the ugly warning. * main.c (display_objedit): Default to the day the user is looking at. 1998-05-05 Miguel de Icaza * gncal-day-panel.c (full_day_size_allocated): Do not emit a value changed signal if the value is the same. 1998-05-04 Miguel de Icaza * prop.c (prop_apply): Only run the apply code once. 1998-05-03 Miguel de Icaza * gncal-day-panel.c (update): Draw the day at startup. (gncal_day_panel_set): Fix selected-day display. (gncal_day_panel_new): Switch day on double clicks, not on single clicks. * calobj.c (ical_object_compute_end): Removed debug messages. 1998-04-30 Miguel de Icaza * prop.c (prop_apply): Do not call prop_cancel, ths is now using GnomePropertyDialog. 1998-04-29 Miguel de Icaza * gncal-week-view.c (sync_week): Use gnome_calendar_tag_calendar. * gnome-cal.c (gnome_calendar_tag_calendar): New routine used to fill a gtk_calendar with the events on a GnomeCalendar object. * gncal-week-view.c (gncal_week_view_new): Set the week to the day we double clicked. 1998-04-28 Miguel de Icaza * gnome-cal.c (calendar_notify): Apply black magic to get mail notifications to work. * gncal-full-day.c (child_focus_out): Temporary optimization, the child_focus_out is constantly calling the gnome_calendar_object_changed when the property editor has been invoked. This happens every time the mouse moves crosses the main window. * calendar.c (calendar_object_changed): Reschedule alarms when a calendar object has changed its times. Sat Apr 25 22:20:45 1998 Havoc Pennington * eventedit.c, eventedit.h: Descend from GnomeDialog. Took vbox out of class structure; use GnomeDialog vbox instead. gnome_dialog_set_destroy instead of destroying in button callbacks. Don't create buttons, separator, or vbox manually. #include . 1998-04-24 Miguel de Icaza * calobj.c (ical_object_create_from_vobject): Fixed alarm loading; Load snooze time and snooze count 1998-04-23 Federico Mena Quintero * calendar.c (calendar_save): Actually save the to-do entries. * gncal-todo.c (simple_todo_editor): Now you can add and edit to-do entries. 1998-04-22 Federico Mena Quintero * gncal-full-day.c: Made it use popup_menu(). * popup-menu.c: New file with utility functions for creating popup menus. Maybe such a thing would be useful in libgnomeui, a la gnome-app-helper? * Makefile.am (gnomecal_SOURCES): Added popup-menu.[ch] to the sources. 1998-04-22 Miguel de Icaza * prop.c (properties): Added Calendar properties editor. (properties): Make the code use a propery box. * main.c: Save/load properties (fix to old commit). 1998-04-21 Federico Mena Quintero * gncal-todo.c: New widget for editing TODO lists. This will be worked on a lot. * Makefile.am (gnomecal_SOURCES): Added gncal-todo.[ch] to the sources. * gncal-day-panel.c: Make it use the new TODO widget. 1998-04-21 Miguel de Icaza * timeutil.c (isodate_from_time_t): Do not save with the global time flag (Z at the end of the isodate). When we figure out a way to load times in GMT time, we will add this back * view-utils.c (popup_menu): Moved this routine here as there are more users of this code. * gncal-day-view.c (gncal_day_view_class_init): Add button press handler. (new_appointment): New routine for creating appointments on a day. * main.c (save_ok): Added call to gtk_window_set_wmclass. * gncal-day-panel.c (calendar_day_selected): Fix, years for mktime should substract 1900 and gtk_calendar stores years relative to year 0. * gncal-week-view.c (gncal_week_view_new): Make the week view descend from VBox so that we can add a label to it. (gncal_week_view_set): Display the ending day of the week correctly. Added a label that displays the week range. 1998-04-21 Federico Mena Quintero * gnome-cal.c: Made it use GncalDayPanel. * gncal-day-panel.c: New widget for the day view in the main calendar toplevel. It basically takes care of everything gnome-cal did by hand with respect to the day view. * Makefile.am (gnomecal_SOURCES): Added gncal-day-panel.[ch] to the rules. * main.c: Added a separator between the About menu item and the help topics. 1998-04-20 Miguel de Icaza * eventedit.c (ee_ok): Mark the event as non-new after accepting changes. 1998-04-20 Federico Mena Quintero * gncal-full-day.c (gncal_full_day_get_day_start_yoffset): New public function that returns the y offset for the row corresponding to the "day begin" time. * gncal-full-day.c (gncal_full_day_key_press): Now any printable keystroke (not just Return) will activate the selected range. * gncal-full-day.c (paint_back): Made it use the new paint_row function instead of painting everything directly. We calculate areas in a smarter way so there is even less flicker than before, especially when selecting regions. * eventedit.c: Sensitize recurrence widgets properly. * calobj.c (duration_callback): Pass the correct pointer type to is_date_in_list(). 1998-04-20 Miguel de Icaza * calobj.c (duration_callback): Take exception dates into account. * gncal-full-day.c (new_appointment): Setup the event editor dates to those of the currently displayed day. (gncal_full_day_selection_range): Use sensible values in the case no range is selected. (new_appointment): Events now use the current day for event creation. * view-utils.c: Pretty up the time display. * calobj.c (ical_object_compute_end): Initialize ico->recur->enddate, otherwise we loop forever during final date computation. * eventedit.c: Now recurrence is toggled by a radio button in the recurrence page, as the checkbox is confusing. * calobj.c (is_date_in_list): Add support for the exclussion dates. 1998-04-18 Miguel de Icaza * gncal-year-view.c (double_click): Fix this routine as well. * gncal-week-view.c (jump_to_day): Bind the gtkcalendar signals to the week. * gncal-year-view.c (gncal_year_view_set_year): Put things in the proper range. Now the year view actually matches this year. * gnome-cal.html: Added small documentation. * main.c: Add more icons to the menus; Rename some menubar entries; Add `new' icon to the toolbar. (dump_events): Added argument handling and dumping of events from the command line. Extremely cool. * getdate.y: Taken from the CVS source code. Used for date parsing in the command line. Internationalized getdate.y. Wee! It even works with spanish. * calobj.c (ical_object_to_vobject): Add Quoted printable property to items containing new lines. (duration): Use unsigned integers, to work around buggy calendar files generated by korganizer. * main.c (save_calendar_cmd): Do not ask for file name if we are saving. (save_as_calendar_cmd): New command. 1998-04-17 Miguel de Icaza * alarm.c (alarm_kill, alarm_init, alarm_add): Implement the alarm management framework. 1998-04-17 Federico Mena Quintero * calobj.c (ical_new): Added mandatory status property. (ical_object_to_vobject): Only store "related" list if it exists. (store_list): Add terminating null char and free the correct data. * main.c (save_calendar_cmd): Implemented calendar saving. (open_calendar_cmd): Implemented calendar loading. (new_calendar_cmd): Implemented calendar creation. (new_calendar): Don't load our test calendar by default. * gncal-full-day.c (delete_appointment): Delete appointment implemented. * eventedit.c (ee_store_recur_values_to_ical): Free/create ical's recurrence appropriately. (ee_rp_init_rule): Initialize all missing parameters from ical. (ee_rp_init_ending_date): Initialize missing fields from ical. 1998-04-17 Miguel de Icaza * gnome-cal.c (gnome_calendar_remove_object): Add support for removing objects. 1998-04-17 Federico Mena Quintero * eventedit.c (ee_init_recurrence_page): New function that creates the recurrence page in the toplevel notebook. (ee_store_recur_values_to_ical): Now we can also store the recurrences. 1998-04-17 Miguel de Icaza * calobj.c (ical_object_generate_events): Implement RECUR_MONTHLY_BY_POS implemented. (ical_object_create_from_vobject): Fix the alarm initialization code. (save_alarm): Save alarms. (ical_object_generate_events): Fixed the recurrent code to take into account the recur->endate field (if at all specified). (ical_object_to_vobject): Implement recurrence rule saving. 1998-04-16 Federico Mena Quintero * eventedit.c (ee_store_alarm): Use menu_shell->children, not menu->children. Why does GtkMenu have a children field in the object structure? (check_dates): New function that insures that start_date < end_date. (check_times): In addition to checking whether the event spans the whole day, now it insures that start_time < end_time. * gncal-full-day.c (child_set_size): Now children get bigger temporarily while they are focused. This allows the handles not to "overlap" the rows used by the child and thus allow editing of very thin events. (recompute_motion): Fix for new child coordinates. (gncal_full_day_expose): Make it use find_child_by_window() instead of looking for it by hand. * bell.xpm recur.xpm: XPM files for events with alarm and recurrence, respectively. 1998-04-15 Federico Mena Quintero * gncal-full-day.c (button_1): Preserve the up/down cursor while dragging. * gncal-full-day.c (child_draw): Now children have a vertical handle as well. This can be used to move the child anytime, not only when it is focused. (recompute_motion): Modified for new drag behavior. * eventedit.c (ee_init_general_page): The general_owner may be null. Do the proper thing when creating the label. (ee_ok): Update the gnome calendar appropriately. * timeutil.h: * gncal-year-view.h: Add some missing prototypes. * gncal-full-day.c (child_popup_menu): Set the sensitivity of menu items according to whether the ical object is being edited or not. * eventedit.c (event_editor_new): Set the "being edited" flag on the ical object (stored as the ical object's user data). (event_editor_destroy): Release the flag. * calobj.h: The iCalObject structure now has a generic user_data pointer. * calobj.c (ical_object_set_user_data ical_object_get_user_data): Functions to set this data. * gncal-full-day.c (child_button_press): Do child popup menu correctly. * main.c (about_calendar_cmd): Fixed my address and added Arturo to the authors in the about box. * gncal-full-day.c (find_child_by_window): Compare child's widget windows by user_data (which will be the parent widget, that is, the text widget). We cannot assume that child->widget->window will be *the* window we are interested on because there may be child widgets with multiple windows. 1998-04-15 Miguel de Icaza * calobj.c (ical_foreach): Define iterator routine. 1998-04-15 Arturo Espinosa Aldama * gncal-year-view.[hc]: Now using time_t for new and set. Random fixes, as well. 1998-04-15 Federico Mena Quintero * gncal-full-day.c (button_3): New popup menus activated with mouse button 3. (create_appointment): Create a new appointment from the popup menus. See the FIXME. 1998-04-15 Miguel de Icaza * gncal-full-day.c (layout_kill_rows): Routine to destory rows array properly. * gncal-year-view.c (gncal_year_view_new): Add missing year in call to strftime. * calobj.c (ical_object_create_from_vobject): Fixed memory leaks from the return values of versit's fakeCString. 1998-04-14 Arturo Espinosa Aldama * gncal-year-view.[hc]: New widget for the year view. * Makefile.am: added required compilation of the new files. 1998-04-14 Federico Mena Quintero * eventedit.c (event_editor_setup_time_frame): Fixed some table expansions to make the dialog look nicer when resized. * calobj.c (ignore_space): Fixed compiler warning about unused computed value. (ocurrencelist): Replace str by p confusion. Removed unused variables value and q. (daynumber): Fixed a couple of warnings about unused values. (load_recurrence): Removed unused variable c. Added a default clause to the switch(type). * eventedit.c (ee_rp_init_frequency): Removed unused variable content. Fixed a compiler warning by adding a missing cast. * calobj.c (ical_object_create_from_vobject): Make the load_recurrence() part work correctly. Eliminated use of syntax_error variable. 1998-04-13 Federico Mena Quintero * gncal-full-day.c (child_key_press): Unfocus the child and focus the parent fullday widget when the user presses Esc. * gncal-week-view.c (gncal_week_view_update): Now takes object and flags parameters. * gncal-day-view.c (gncal_day_view_update): Likewise. * gncal-full-day.c (gncal_full_day_update): Likewise. (child_focus_in): New function. In conjunction with child_focus_out(), these only display the handles in the child when it is focused. The result is that the user can see more of the child's text when nothing is focused, and we can also display fatter and nicer drag handles. * gnome-cal.c (gnome_calendar_object_changed): Now takes an additional flags parameter (gnome_calendar_update_all): Made function static. Now takes changed object and flags parameters as well. (gnome_calendar_object_changed): Now takes additional flags parameter to indicate what changed in the specified object. * calobj.h (CalObjectChange): New enum with flags to describe what has been changed in an object. * gncal-full-day.h: * gncal-full-day.c (gncal_full_day_focus_child): New function to let the outside world decide which child to focus. (gncal_full_day_focus_child): Bleah. We have to synthesize a click because GtkText will not set the cursor when you focus it. * gnome-cal.c (day_view_range_activated): Focus the new child in the full day widget. * eventedit.c (event_editor_setup_time_frame): Re-aligned some widgets to make it look prettier. (ee_alarm_widgets): Likewise. (ee_init_general_page): Likewise. (ee_classification_widgets): Likewise. (event_editor_init_widgets): Likewise. * gnome-cal.c (day_view_range_activated): Create new object and add it to the calendar. You can now select a range in the full-day view, hit Return, and a new event will be added at the selected range. I still have to figure out how to focus this new child. * gncal-full-day.c (paint_back): Rewrote function to avoid painting an area more than once -- eliminate flicker. (paint_back_rows): New function that calls paint_back() only for the area of the specified rows. (gncal_full_day_button_press): (gncal_full_day_button_release): (gncal_full_day_motion): Made these functions use paint_back_rows() instead of paint_back(), to eliminate flicker. Wheee! 1998-04-12 Federico Mena Quintero * gnome-cal.c (setup_day_view): We now connect to the range_activated signal of the fullday widget instead of catching key presses ourselves. (day_view_range_activated): New function that creates a new iCalObject and inserts it into the calendar, not finished yet. 1998-04-11 Federico Mena Quintero * gncal-full-day.c (get_time_from_rows): New function, calculates a pair of time_t values from the specified start and number of rows. * gncal-full-day.h (GncalFullDayClass): New signal "range_activated". It is emitted when a range is selected and the user hits Return. (gncal_full_day_selection_range): New function, returns the selected range. * gncal-full-day.c (struct drag_info): Moved selection information to their own fields instead of sharing the child's drag fields. This allows us to keep the selection when a child is moved. (recompute_motion): Made the case when (row < di->sel_click_row) work correctly. 1998-04-11 Miguel de Icaza * gnome-cal.c (gnome_calendar_goto): Add support for navigating on the day view. * timeutil.c (time_start_of_day, time_end_of_day, time_day_hour): New time manipulation functions. * eventedit.c (ee_rp_init_frequency): Add the different frequency editors to a notebook. Make the notebook startup on the entry selected recurrence type; 1998-04-11 Federico Mena Quintero * gncal-full-day.c (recompute_motion): Now we support selecting a range in the main window (by clicking+dragging). It flickers horribly and is not perfect, but it is a start. 1998-04-09 Federico Mena Quintero * gncal-full-day.c: #include * gncal-full-day.c (child_map): Show instead of just map the child widget (otherwise the text widget gets confused and will not focus). * calobj.c (ical_object_to_vobject): Quote chars as 'x', not "x". * calobj.h: Added prototype for ical_object_to_vobject(). * gnome-cal.c (gnome_calendar_object_changed): New function. This should be called when a calendar object is changed. * gncal-full-day.c (update_from_drag_info): Call gnome_calendar_object_changed() instead of updating manually. * calendar.c (calendar_add_object): (calendar_remove_object): Set the modified flag to true. * gncal-full-day.c (gncal_full_day_draw): Finished implementing this function. 1998-04-08 Raja R Harinath * gncal.c (update_calendar): Say `#if 0', not `#ifdef 0'. 1998-04-07 Federico Mena Quintero * eventedit.c: Removed unused global variable parent_class. * eventedit.h: Renamed gtk_window field to window. Made the parent_class field in the EventEditorClass structure be a GtkWindowClass, not a gnome property box class. Added prototype for event_editor_get_type(). 1998-04-06 Federico Mena Quintero * gncal-week-view.c (gncal_week_view_new): Use the new gtk_table_set_homogeneous() instead of setting the variable directly. 1998-04-03 Federico Mena Quintero * eventedit.c (ee_create_ae): Make it return void. (ee_alarm_widgets): Remove some unused variables. (ee_store_alarm): Make it return void. #include * eventedit.h: #include "gnome-cal.h" * calobj.c (list_free): Don't use g_free in the g_list_foreach. * calendar.h: Add prototype for calendar_load(). * timeutil.h: Add prototypes for time_add_*(). * calendar.c: * calobj.c: * eventedit.c: * gnome-cal.c: #include "timeutil.h" * gncal-day-view.c (gncal_day_view_size_request): Make the minimum width equal or larger to the title width. * main.c: #include "eventedit.h" (main): Add a return statement. (new_calendar): Show stuff *after* the calendar has been loaded. * gnome-cal.c (gnome_calendar_load): Update the day view. (setup_widgets): Hackish setup of a day view widget - will fix later. (gnome_calendar_init): Initialize all fields. * gnome-cal.h: Added day_view field. Maybe this should be changed when the a complete day view panel is complete. * gncal-day-view.c (gncal_day_view_update): Draw after update, not before. 1998-04-06 Carsten Schaar * versit/.cvsignore: New file. Fri Apr 3 22:31:54 1998 Tom Tromey * calendar.c: Include . 1998-04-03 Miguel de Icaza * timeutil.c (time_add_year, time_add_year, time_add_week): Routines for time manipulation. * calobj.c (ical_object_destroy): Full destruction of the object. * eventedit.c: Finished the main event editor form; It still lacks the details and the recurrence bits. It now adds events and cancels. 1998-04-03 Federico Mena Quintero * view-utils.c (view_utils_draw_events): The "better" format string for strftime() wasn't better, after all :-( 1998-04-02 Federico Mena Quintero * gncal-full-day.c: New full-day widget. It is still a work in progress. It will be similar to M$ Schedule's nifty full day view widget, but with Gtk's elegance :-) * Makefile.am (gnomecal_SOURCES): Added gncal-full-day.[ch] to the sources. 1998-04-02 Miguel de Icaza * eventedit.c: Object editor widget. We dropped ObjEdit. * timeutil.c (time_from_isodate): Fix. * view-utils.c (view_utils_draw_events): Changed the display formats. 1998-04-02 Federico Mena Quintero * view-utils.c (view_utils_draw_events): Use better format specifier for strftime(). (view_utils_draw_textured_frame): Ultra-nifty function to draw textured "metal" frames, like Netscape's handles. 1998-04-02 Miguel de Icaza * gncal-day-view.c (gncal_day_view_update): Day events are now cached inside the widget. They get initialized at this time. * view-utils.c (view_utils_draw_events): Use the list of events. 1998-04-02 Federico Mena Quintero * gncal-day-view.c (gncal_day_view_set_shadow): New customization function. We can't decide on a stupid border type :-) (gncal_day_view_init): Made GTK_SHADOW_ETCHED_IN be the default shadow type. Looks good. 1998-04-02 Miguel de Icaza * main.c: New main program that uses our new datatypes and objects. * calendar.c (calendar_load_from_vobject, calendar_load): Implement loading of vCalendar objects and vCalendar files. * calobj.c (ical_object_create_from_vobject): Implement loading of vCalendar event and todo objects. * timeutil.c (isodate_from_time_t): New function. * gnome-cal.c, gnome-cal.h: Implement a toplevel widget, derived from GnomeApp. It holds all of the day views and arbitrates the display. 1998-04-02 Federico Mena Quintero * gncal-week-view.[ch]: New week view composite widget. This provides a full week view (7 day views plus busy time display -- the latter is currently unimplemented). 1998-04-01 Federico Mena Quintero * gncal-day-view.c: New day view widget. It is intended to be a child widget of the week view composite widget. * calendar.c (calendar_get_objects_in_range): (calendar_get_events_in_range): (calendar_get_journal_in_range): (calendar_get_journal_in_range): These functions now take a sort_func parameter, which is of type GCompareFunc. If the specified value is non-NULL, it will return a sorted list. Otherwise, it will return an unordered list. (calendar_compare_by_dtstart): Provide a generic sorting routine for calendar objects. 1998-04-01 Miguel de Icaza * Start from scratch Tue Mar 31 23:46:50 1998 Tom Tromey * timeutil.c (format_simple_hour): `buf' now static. 1998-03-31 Federico Mena Quintero * gncal.c: Removed #include "gtkcalendar.h", because it now comes from libgnomeui. * Makefile.am (gncal_SOURCES): Added new source files to the rules. * timeutil.c (format_simple_hour): New function, formats an hour/am_pm pair into a string of the form "3am", "12pm", "05h", "19h", etc. It is used by the day view widget for its labels. 1998-03-31 Craig Small * Now has (non working) session maangement * Uses a clist for the dailylist like gtt Sat Mar 21 15:43:20 1998 Tom Tromey * gncal.c: Use gnome_message_box_*, not gnome_messagebox_*. 1998-03-12 Craig Small * Now linked (in some horrible way) to the gtkcalendar widget. Sun Mar 8 16:38:10 1998 Tom Tromey * Makefile.am (INCLUDES): Added GNOME_INCLUDEDIR. (gncal_LDADD): Don't include libsupport.a. * gncal.c (main): Use new gnome_init. 1998-02-19 Federico Mena Quintero * gncal.c (main): Added app_id "gncal". 1998-02-19 Carsten Schaar * Makefile.am (gncal_LDADD): Added '$(INTLLIBS)' 1998-02-18 Raja R Harinath * Makefile.am (gncal_LDADD): Include `libsupport.a'. * calcs.c (month_atoi): Replace buggy explicit loop string compare with strcasecmp. (day_atoi): Likewise. Sun Jan 25 23:38:30 1998 Miguel de Icaza * menus.c: Replace "Quit" with "Exit".