2004-08-10 Rodrigo Moya * gui/alarm-notify/alarm-queue.c (tray_icon_destroyed_cb): disconnect from signals also when using only the system tray. Fixes a crash when removing an event that had an alarm popup recently. 2004-08-09 Rodrigo Moya * gui/e-calendar-view.c: re-added 'Make this occurrence movable' menu item, gone by mistake. (on_unrecur_appointment): new callback for the new menu item. 2004-08-06 JP Rosevear Fixes #62452 * gui/e-itip-control.c (find_my_address): take option to retrieve current status as well, actually look for the delegator in the list so we can retrieve status there as well (show_current_event): use find_my_address to get the status so we properly handle not finding the address in the list of attendees (show_current): pass extra param (ok_clicked_cb): ditto 2004-08-06 JP Rosevear Fixes #62021 * gui/dialogs/event-page.c (source_changed_cb): set the default timezone * gui/e-itip-control.c (start_calendar_server): set the default timezone * gui/calendar-component.c (setup_create_ecal): set the default timezone, as the component view is not alive and hence has not set it * gui/tasks-component.c (setup_create_ecal): ditto 2004-08-05 Parthasarathi S A Fix for bug #61673. * calendar/gui/dialogs/save_comp.c(save_component_dialog): The function takes two arguments now, instead of one. The second argument is the pointer to the ECalComponent from which the component type can be determined. Based on the component type the corresponding error message is displayed. * calendar/gui/dialogs/save_comp.h: Function definition updated for save_component_dialog. * calendar/gui/dialogs/comp_editor.c(prompt_to_save_changes): passing the ECalComponent pointer to the 'save_component_dialog' function * calendar/calendar-errors.xml: New error message string for task included * calendar/calendar-errors.xml.h 2004-08-05 Rodrigo Moya Fixes #62030 * gui/alarm-notify/alarm-queue.c (tray_icon_destroyed_cb): only remove the tray icon blinking timeout if we installed it. (display_notification): only install the tray icon blinking timeout if using the system tray. (tray_icon_blink_cb): use g_object_unref instead of the deprecated gdk_pixbuf_unref. * gui/alarm-notify/alarm.c (alarm_add): added missing argument documentation. 2004-08-03 JP Rosevear * gui/gnome-cal.c (gnome_calendar_destroy): clean up all the default clients (default_client_cal_opened_cb): change the if statement to a switch to be consistent with the other code bits and set the default client for the source type (gnome_calendar_add_source): look at the default based on the source type (gnome_calendar_set_default_source): set the default for the source type (gnome_calendar_new_task): bail out if we have no ecal * gui/gnome-cal.c (set_timezone): set the timezone for all the default clients * gui/calendar-component.c (update_primary_task_selection): look in the task source list, not the plain source list 2004-08-05 JP Rosevear * gui/tasks-control.c (tasks_control_sensitize_commands): kill warning by checking if there is a default client first (can happen when first starting up) 2004-08-05 JP Rosevear Fixes #62363 * gui/calendar-component.c (create_new_event): commit the sequence 2004-08-04 Harish Krishnaswamy * gui/e-itip-control.c: (ok_clicked_cb): Handle decline request by using update_item rather than remove_item, so the backend receives the notification and can handle it. Also, do not rsvp if the backend has the 'save_schedule' capability. 2004-08-01 JP Rosevear * conduits/todo/todo-conduit.c (todoconduit_load_configuration): get source list and source (todoconduit_dupe_configuration): copy source list and source (todoconduit_destroy_configuration): unref source list and source (start_calendar_server): open the source that was set earlier (fill_widgets): set the source option menu value (create_settings_window): pass source list to pilot settings (save_settings): mark source with pilot-sync property * conduits/calendar/calendar-conduit.c: as above * conduits/todo/Makefile.am: link to and include misc. widgets * conduits/calendar/Makefile.am: ditto 2004-07-30 Rodrigo Moya Fixes #57622 * gui/e-cal-model.h: added ECalModelFlags enum type. * gui/e-cal-model.c (e_cal_model_set_flags, e_cal_model_get_flags): new functions. (e_cal_model_init): initialize the new internal field to keep the flags. (e_cal_view_objects_added_cb): expand recurrences if the model flags contain the EXPAND_RECUR bit. (e_cal_view_objects_modified_cb): if EXPAND_RECUR is on, remove all recurrences and regenerate them. (e_cal_view_objects_removed_cb): remove all instances for given UIDs. (add_new_client): killed warning. (get_dtstart): use the instance_start time when dealing with recurrences. * gui/e-cal-model-calendar.c (get_dtend): use the instance_end time when dealing with recurrences. * gui/e-cal-list-view.c (e_cal_list_view_new): set the EXPAND_RECUR flag on the model for the list view. * gui/e-week-view.c (e_week_view_add_event): * gui/e-day-view.c (e_day_view_add_event): fill in the instance's start and end times in the ECalModelComponent struct. * gui/e-calendar-view.c (e_calendar_view_delete_selected_occurrence): use the instance_start field to retrieve the RECUR-ID, now that all the views fill it in. 2004-07-29 JP Rosevear * gui/e-calendar-view.c: creating new items no longer needs to be disabled since the user can switch to a writable calendar and the editor ui is disabled properly 2004-07-31 JP Rosevear * gui/dialogs/event-editor.c (show_meeting): use Invitations not Meetings (event_editor_edit_comp): ditto 2004-07-31 JP Rosevear * gui/e-day-view.c (e_day_view_finish_long_event_resize): guard with is_instance instead of has_recurrences because most of the backends don't support this yet (e_day_view_finish_resize): ditto (e_day_view_change_event_time): ditto (e_day_view_on_editing_stopped): ditto (e_day_view_on_top_canvas_drag_data_received): ditto (e_day_view_on_main_canvas_drag_data_received): ditto * gui/e-week-view.c (e_week_view_change_event_time): ditto (e_week_view_on_editing_stopped): ditto 2004-07-30 Harish Krishnaswamy * gui/e-tasks.c: (client_cal_opened_cb), (default_client_cal_opened_cb): * gui/gnome-cal.c: (client_cal_opened_cb), (default_client_cal_opened_cb): Handle E_CALENDAR_STATUS_BUSY conditions and do not remove the source from the gnome-calendar. The fix for #59335 exposed this problem. 2004-07-28 Larry Ewing * gui/dialogs/calendar-setup.c (dialog_hide_unused_options): hide dialog items that don't apply when editing properties. (general_update_dialog): check to make sure we have a source before checking its state. 2004-07-27 JP Rosevear Fixes #62006 * gui/e-cal-model.c (add_new_client): don't load the events if we are already doing the query 2004-07-25 JP Rosevear Fixes #61058 * gui/e-week-view.c (process_component_recur_cb): add but don't prepend (process_component): use above as call back so we can pass the prepend bool (e_week_view_add_event): take a prepend bool and prepend to the events array if asked so the event will be shown first when drawn (e_week_view_do_key_press): If the event can't be fit on the screen, ie not even one event can be shown in the day, don't try to edit it 2004-07-26 Rodney Dawes * gui/dialogs/event-page.glade: Fix mnemonic for "Location" to not be duplicated with "OK" * gui/dialogs/meeting-page.c (get_widgets): Get the "Attendees" label (meeting_page_construct): Fix padding of GtkScrolledWindow widget Set the mnemonic widget for the "Attendees" label * gui/dialogs/meeting-page.glade: Fix HIG spacing to be correct Fix the mnemonic for "Organizer" to not conflict Add mnemonic for "Attendees" * gui/dialogs/task-page.glade: Add mnemonic for "Description" 2004-07-26 JP Rosevear * gui/dialogs/calendar-setup.c (calendar_setup_edit_calendar): set a different title if we are editing; de-sensitize option menu if we are editing (calendar_setup_edit_task_list): set a different title if we are editing * gui/dialogs/calendar-setup.glade: use task list instead of tasks group * gui/tasks-component.c (impl__get_userCreatableItems): add assigned task as an item, use task list instead of tasks group * gui/calendar--component.c (impl__get_userCreatableItems): fiddle with shortcuts 2004-07-25 pchenthill Fixes #59983 If the ecal component is already loaded, check for the participation status of the attendee and display the menu for selecting the calendar. 2004-07-23 JP Rosevear Fixes #61571 * gui/e-week-view.c (e_week_view_start_editing_event): if the event moves, find it again using the model data as the invariant and then find the span again 2004-07-23 JP Rosevear Fixes #61760 * gui/e-cal-model.c (add_new_client): don't check against the URI, just against the client 2004-07-23 pchenthill * Retracting the commit made below for #59983 as it has results in crash some cases 2004-07-23 pchenthill Fixes #59983 * gui/e-itip-control.c (show_current_event): If the ecal component is already loaded, check for the participation status of the attendee and display the menu for selecting the calendar. 2004-07-22 Larry Ewing * gui/e-meeting-time-sel.c (e_meeting_time_selector_style_set): fix the row heights and tweek the offsets so that things come out OK. 2004-07-21 JP Rosevear Fixes #61776 * gui/e-calendar-table.c (clipboard_get_text_cb): make sure the text is not NULL 2004-07-21 JP Rosevear Fixes #61738 * gui/dialogs/meeting-page.c (clear_widgets): by default we have a user as organizer (sensitize_widgets): use user_org to determine widget sensitivity (meeting_page_fill_widgets): set user_org value appropriately (change_clicked_cb): set user_org to TRUE 2004-07-21 JP Rosevear Fixes #61779 * gui/dialogs/task-page.c (init_widgets): listen for changes on start and due dates * gui/dialogs/task-details-page.c (init_widgets): listen for changes on completion date 2004-07-20 Not Zed * gui/e-cal-model.c: * importers/icalendar-importer.c: * gui/dialogs/select-source-dialog.c: * gui/dialogs/copy-source-dialog.c: * gui/alarm-notify/util.c: * common/authentication.c: * gui/migration.c: include config.h. See #61395. 2004-07-16 JP Rosevear Fixes #61451 * gui/e-itip-control.c (get_cancel_options): don't give a cancel option if the event is no where to be found (show_current_event): pass in kind (show_current_todo): ditto 2004-07-16 Larry Ewing * gui/e-meeting-time-sel.c (e_meeting_time_selector_style_set): fix the row heights and tweek the offsets so that things come out OK. 2004-07-16 Larry Ewing * gui/calendar-component.c (set_info): use short month forms to limit the maximum width of the label. 2004-07-15 Rodrigo Moya Fixes #57142 * gui/e-day-view.c (e_day_view_on_editing_stopped): commit the sequence on the object before sending it to the backend. (e_day_view_add_event): s/abort_sequence/commit_sequence. * gui/e-week-view.c (e_week_view_on_editing_stopped): commit the sequence here also. (e_week_view_add_event): s/abort_sequence/commit_sequence. * gui/comp-util.c (cal_comp_event_new_with_current_time): don't commit the sequence here. 2004-07-14 JP Rosevear Fixes #61572 * gui/dialogs/schedule-page.c (times_changed_cb): call notify changed * gui/dialogs/comp-editor.c (page_summary_changed_cb): no need to mark the editor changed here, it doesn't do the right thing anyhow (page_dates_changed_cb): ditto 2004-07-14 JP Rosevear Fixes #60678 * gui/dialogs/cancel-comp.c (cancel_component_dialog): flip the messages around, the "deleting" flag means something else is doing the deleting 2004-07-12 JP Rosevear Fixes #57287, 58748 * gui/tasks-component.c (source_added_cb): if the source was added in the main calendar, select it because the user caused this to happen by creating a task (create_component_view): listen for source_added signal on the tasks * gui/gnome-cal.c (view_selection_changed_cb): if the user created a task, make sure we are displaying the relevant event list (set_timezone): set the default zone of the default client (setup_widgets): listen for the user_created signal (gnome_calendar_destroy): clean up default client (client_cal_opened_cb): disconnect from the open signal (default_client_cal_opened_cb): set the default client on the models (open_ecal): make the callback function a param (gnome_calendar_add_source): include the default client when searching for an existing client (gnome_calendar_set_default_source): make the default client independent of the rest of the clients * gui/e-week-view.c (e_week_view_on_editing_stopped): emit user_created signal * gui/e-tasks.c (user_created_cb): if the user created a task, make sure we are displaying the relevant task list (set_timezone): set the timezone on the client (setup_widgets): listen for user_created signal (e_tasks_destroy): unref default client (default_client_cal_opened_cb): set the default on the model when it opens (open_ecal): open a task list (e_tasks_add_todo_source): include the default client when searching for an existing client (e_tasks_set_default_source): make the default client independent of the rest of the clients * gui/e-day-view.c (e_day_view_on_editing_stopped): emit user_created signal * gui/e-calendar-view.h: add signal proto * gui/e-calendar-view.c (e_calendar_view_class_init): add user_created signal * gui/e-calendar-table.h: add signal proto * gui/e-calendar-table.c (e_calendar_table_class_init): add user_created signal (row_appended_cb): if row is appended, emit user_created signal (e_calendar_table_init): listen for row_appended signal * gui/e-cal-model.h: add signal proto * gui/e-cal-model.c (e_cal_model_class_init): add row_appended signal (ecm_append_row): don't leak, emit row appended signal (e_cal_model_set_default_client): remove the existing default if it was only used as the default (update_e_cal_view_for_client): short circuit query create (add_new_client): look for an existing client and update its record if found, handle opening things here (e_cal_model_add_client): just call add_new_client (remove_client_objects): just remove a client's objects (remove_client): use above, handle removal of client if its default * gui/calendar-component.c (source_added_cb): if the source was added in the main calendar, select it because the user caused this to happen by creating an appointment (create_component_view): listen for source_added signal on the calendar 2004-07-08 Radek Doulik * gui/e-cal-model.c (e_cal_model_date_value_to_string): as below * gui/e-cal-model-calendar.c (ecmc_value_to_string): as below * gui/e-cal-model.c (ecm_value_to_string): as below * gui/e-cal-model-tasks.c (ecmt_value_to_string): dup the string value, it's free-ed later. instead of returning NULL return g_strdup ("") as gal does Fixes #56271 2004-07-12 Rodney Dawes * gui/e-tasks.c (pane_realized): Add this callback so we can set the paned position on realize (setup_widgets): Move the paned widget to the priv structure so that we can access it elsewhere (display_view_cb): Set the paned position when the view gets displayed Fixes #55653 2004-07-12 Rodney Dawes * gui/dialogs/recur-comp.c (recur_component_dialog): Update the layout of the dialog to be more usable Partially fixes #56171 2004-07-11 Jürg Billeter * gui/dialogs/event-page.c (event_page_fill_component): busy should be opaque, not transparent 2004-07-09 Rodrigo Moya Revert my patches from July 5th and 6th. * gui/gnome-cal.c (gnome_calendar_init): call setup_config/widgets in the previous order. (setup_widgets): set the timezone on the views when creating them. (set_timezone): no need to set the timezone on the views here. (client_cal_opened_cb): removed call to set_timezone(). 2004-07-09 Rodney Dawes * gui/e-day-view-top-item.c (e_day_view_top_item_draw_triangle): Add an argument for the event_num so we can get the event object Draw the left/right triangles with the right color for the event Fix a small alignment bug with the triangle points * gui/e-week-view-event-item.c (e_week_view_event_item_draw_triangle): Draw the left/right triangles with the right color for the event Fix a small alignment bug with the triangle points 2004-07-09 Rodrigo Moya Fixes #60289 * gui/dialogs/select-source-dialog.c (select_source_dialog): set the absolute URI on the selected source, so that the ESource we keep around has a valid URI. * gui/e-calendar-view.c (transfer_item_to): when copying appointments, change the UID. (transfer_selected_items): don't pass hardcoded values to transfer_item_to. 2004-07-08 Frederic Crozat * gui/Makefile.am: tarball should ship .schemas.in.in files, not generated files. 2004-07-06 Rodrigo Moya * gui/gnome-cal.c (gnome_calendar_init): setup the widgets before the configuration. 2004-07-06 JP Rosevear Fixes #60645 * gui/e-calendar-view.c (e_calendar_view_new_appointment_full): guess when an item should be all day based on the selection time 2004-07-05 Rodrigo Moya * gui/gnome-cal.c (setup_widgets): don't set the timezone on the views here. (set_timezone): do it here. (client_cal_opened_cb): call set_timezone() here. 2004-07-02 Rodrigo Moya * gui/gnome-cal.c (set_view): update the internal current_view_type field and focus the newly selected view. 2004-07-02 Rodney Dawes * gui/dialogs/url-editor-dialog.c (get_widgets): Get the label for the calendar list header also (init_widgets): Set the border widths for the dialog's vbox and action area to be more compliant with the HIG Set the mnemonic widget for the calendar label, to the Source Selector Remove the unneeded settings for the scrolled window, these are in the glade xml for the widget Set the icon list on the correct dialog widget, not the settings dialog * gui/dialogs/url-editor-dialog.h: Add the calendar_list_label widget here so we can access it * gui/dialogs/url-editor-dialog.glade: Change the dialog's layout to be HIG compliant and fix some strings to do the same Add mnemonics to all the labels that are associated with widgets 2004-06-29 Sivaiah Nallagatla * gui/e-tasks.c (e_tasks_add_todo_source) (e_tasks_remove_todo_source) : store and lookup clients based on ESource uid instead of uri in priv->clients 2004-06-28 Not Zed * gui/tasks-component.c (impl__get_userCreatableItems): same. * gui/calendar-component.c (impl__get_userCreatableItems): fix up shortcuts. #56746. 2004-06-25 JP Rosevear * gui/dialogs/alarm-dialog.glade: don't show option tabs 2004-06-25 JP Rosevear * gui/dialogs/task-editor.c (task_editor_construct): use "Task" instead of "Basic" * gui/dialogs/event-editor.c (event_editor_construct): use "Invitations" instead of "Meeting" 2004-06-25 JP Rosevear * gui/dialogs/e-delegate-dialog.glade: use "Contacts..." * gui/dialogs/alarm-dialog.glade: add custom message email toggle * gui/dialogs/alarm-dialog.c (get_widgets): get custom email message toggle (check_custom_email): check the custom message when setting sensitivity of OK button (malarm_message_toggled_cb): check custom email (malarm_description_changed_cb): ditto (action_selection_done_cb): ditto 2004-06-25 JP Rosevear * gui/dialogs/alarm-dialog.c (alarm_to_dialog): set the default address here if possible (dialog_to_alarm): don't set it here (check_custom_email): check for To: entries (malarm_addresses_changed_cb): update when the text in the to entry changes (action_selection_done_cb): for the custom email settings (init_widgets): listen for email To: changes (alarm_dialog_run): only save the alarm if the response was "OK" 2004-06-25 JP Rosevear * gui/dialogs/event-page.c (event_page_init): init alarm interval to -1 (clear_widgets): give the alarm time option menu a sensible default (is_custom_alarm): account for the user defined alarm time if it doesn't match the default set (event_page_fill_widgets): default the option menu to the 15 minute or user define alarm if no alarm is currently set (event_page_fill_component): account for the user defined alarm tme (init_widgets): add in the user defined alarm time if it doesn't match the default set 2004-06-25 JP Rosevaer * gui/dialogs/alarm-dialog.c (palarm_widgets_to_alarm): the args are optional, don't store them if they aren't there (check_custom_sound): sensitize the ok button based on whether or not there needs to be input (check_custom_message): ditto (check_custom_program): ditto (dalarm_message_toggled_cb): check custom message (dalarm_description_changed_cb): ditto (aalarm_sound_toggled_cb): check custom sound (aalarm_attach_changed_cb): ditto (palarm_program_changed_cb): check custom program (action_selection_done_cb): use above checks as appropriate (init_widgets): listen for changed signals 2004-06-25 JP Rosevear * gui/dialogs/event-page.c (event_page_finalize): free old_summary (is_custom_alarm): take description into account when checking for custom alarm (is_custom_alarm_uid_list): pass old_summary (is_custom_alarm_store): ditto (is_custom_alarm_store): ditto (sensitize_widgets): ditto (event_page_fill_component): ditto (event_page_fill_widgets): store the initial summary (alarm_changed_cb): make sure the needs description property gets set on the default alarm (alarm_custom_clicked_cb): copy the current store in case the user hits cancel, if all the alarms are erased uncheck the alarm toggle * gui/dialogs/alarm-dialog.glade: add toggles for custom messages and sound * gui/dialogs/alarm-dialog.c (aalarm_widgets_to_alarm): store custom sound only if the toggle is checked (dalarm_widgets_to_alarm): store custom message only if toggle is checked (get_widgets): load new widgets (aalarm_sound_toggled_cb): sensitize sound entry (dalarm_message_toggled_cb): sensitize message entry (init_widgets): listen for toggle signals 2004-06-24 JP Rosevear * gui/dialogs/alarm-list-dialog.c (selection_changed_cb): sensitize the buttons (init_widgets): listen for selection changes so we can delete alarms 2004-06-24 JP Rosevear * gui/dialogs/event-page.c (event_page_fill_component): store all the custom alarms (alarm_custom_clicked_cb): emit changed signal if necessary * gui/dialogs/alarm-list-dialog.c (alarm_list_dialog_run): return true/false based on button pushed * gui/dialogs/alarm-dialog.c: move repeat options and per alarm type options here * gui/dialogs/alarm-dialog.glade: ditto * gui/dialogs/Makefile.am: remove alarm options dialog 2004-06-24 Rodney Dawes * gui/calendar-component.c (create_component_view): * gui/tasks-component.c (create_component_view): Add a call to e_source_selector_set_select_new here so that we can select new sources when we create them 2004-06-23 Jeffrey Stedfast * conduits/todo/todo-conduit.c: Bump the version to 0.1.5 to help track down bug #59726. 2004-06-23 JP Rosevear * gui/dialogs/comp-editor.c (comp_editor_init): set the window type hint to normal so it can go below the shell window 2004-06-23 Rodrigo Moya * gui/dialogs/comp-editor.c (comp_editor_notify_client_changed): fixed gtk-doc comments and made it enable/disable the dialog's OK button depending on the selected source. 2004-06-23 Rodney Dawes * gui/calendar-component.c: Revert previous change to add the callbacks for notification of calendar selection changes (create_new_view): Update the comment for watching notification on the tasks selection to state it is for the mini tasks view 2004-06-23 JP Rosevear Fixes #57862 * gui/gnome-cal.c (connect_day_view_focus): connect after the focus events happen so the day view knows what is selected 2004-06-23 JP Rosevear * gui/e-itip-control.c (update_attendee_status): tidy up to work again (ok_clicked_cb): use above when replying 2004-06-23 JP Rosevear * gui/dialogs/meeting-page.c (remove_attendee): util function to do the actual removal (remove_attendee_at_row): ditto based on row number (remove_clicked_cb): make the remove button work (popup_delete_cb): use utility routines to do removal (button_press_event): do the icon properly 2004-06-22 Rodney Dawes * gui/calendar-component.c (config_calendars_selection_changed_cb): (config_primary_calendar_selection_changed_cb): Add these two callbacks so that we can update the selection in the calendar when the gconf key changes, like we do for tasks (create_component_view): Register the two callbacks that we created for updating the selection in the view, and their notification IDs 2004-06-22 JP Rosevear * gui/e-meeting-time-sel.c (e_meeting_time_selector_construct): clean up mnemonic handling and put the proper icon in the contacts button 2004-06-22 JP Rosevear * gui/dialogs/recurrence-page.glade: fix mnemonics * gui/dialogs/event-page.glade: ditto 2004-06-22 JP Rosevear * gui/dialogs/comp-editor.c: kill warnings 2004-06-22 JP Rosevear * gui/calendar-component.c (create_new_event): kill warning 2004-06-22 Rodrigo Moya * gui/dialogs/Makefile.am: removed alarm-page.*. 2004-06-22 JP Rosevear * gui/dialogs/Makefile.am, gui/dialogs/alarm-dialog.c, gui/dialogs/alarm-dialog.glade, gui/dialogs/alarm-dialog.h, gui/dialogs/alarm-list-dialog.c, gui/dialogs/alarm-list-dialog.glade, gui/dialogs/alarm-list-dialog.h, gui/dialogs/alarm-options.c, gui/dialogs/alarm-options.h, gui/dialogs/alarm-page.c, gui/dialogs/alarm-page.glade, gui/dialogs/alarm-page.h, gui/dialogs/comp-editor.c, gui/dialogs/comp-editor.h, gui/dialogs/event-editor.c, gui/dialogs/event-page.c, gui/dialogs/event-page.glade, gui/dialogs/meeting-page.c, gui/dialogs/meeting-page.glade, gui/dialogs/recurrence-page.c, gui/dialogs/recurrence-page.glade, gui/dialogs/task-details-page.c, gui/dialogs/task-details-page.glade, gui/dialogs/task-editor.c, gui/dialogs/task-page.c, gui/dialogs/task-page.glade: HIGify and newer design; alarm page is gone, Cancel/OK buttons for the dialog, no more menus; slightly improve read-only workings for entry areas 2004-06-22 JP Rosevear * gui/e-meeting-time-sel.c (e_meeting_time_selector_construct): rename widgets to be consistent with those else where (e_meeting_time_selector_set_read_only): cast properly (e_meeting_time_selector_on_invite_others_button_expose): remove, the widget sensitization is taken care of elsewhere 2004-06-22 Larry Ewing Fixes #59824 * gui/e-week-view.h: increase some of the passing so that the text does not appear to run together. Ideally this would be based on the font size but this will work for now. 2004-06-21 Rodney Dawes Fixes #56892 * gui/dialogs/select-source-dialog.c (row_activated_cb): Add this callback to activate the OK button when we double-click or press the Enter key on a row (select_source_dialog): Change the default size to be reasonable Use ensure_style instead of realize on the dialog Set the default response for the dialog to OK Fix the packing of the group label to not have extraneous padding Connect up the callback for row_activated 2004-06-18 Jeffrey Stedfast Fixes bug #57592 * conduits/calendar/calendar-conduit.c (pre_sync): Same as below. * conduits/todo/todo-conduit.c (pre_sync): s/wombat/evolution-data-server/g 2004-06-18 Rodrigo Moya Fixes #58747 * gui/dialogs/comp-editor.c (prompt_to_save_changes): if the source is read only, don't prompt the user. 2004-06-18 Rodrigo Moya Fixes #56323 * gui/calendar-component.c (create_new_event): removed read-only check, just call the editor with the currently selected client and let it do the job. * gui/tasks-component.c (create_new_todo): ditto. 2004-06-18 Rodrigo Moya Fixes #60293 * gui/dialogs/recurrence-page.c (type_toggled_cb): make sure we enable/disable correctly the 'Add' button. 2004-06-17 Sivaiah Nallagatla * gui/itip-utils.c (itip_publish_comp) : check for host being non-NULL in soup uri. host can be null for uri's of the form file:/foo or http:/foo etc 2004-06-17 Rodrigo Moya Fixes #60309 * gui/meeting-page.c (sensitize_widgets): moved up in the file, to be declared before any use. 2004-06-16 Rodrigo Moya * gui/e-itip-control.c: use e-util's HTML conversion function, instead of camel's. (write_html): use e_text_to_html_full(). 2004-06-15 JP Rosevear Fixes #56197 * gui/e-cal-list-view.etspec: add back categories * gui/e-calendar-table.etspec: ditto 2004-06-15 JP Rosevear Fixes #59401 * gui/e-week-view.c (e_week_view_on_text_item_event): if we are editing the event, don't ignore the right click, stop editing the event and continue on 2004-06-15 JP Rosevear Fixes #57393 * gui/e-week-view.c (e_week_view_set_compress_weekend): redraw the titles as well since the spacing is different 2004-06-15 Rodrigo Moya * gui/dialogs/meeting-page.c (meeting_page_construct): connect to "client_changed" signal on the page. (client_changed_cb): new callback. (sensitize_widgets): new function. (meeting_page_fill_widgets): call sensitize_widgets(). * gui/e-meeting-time-sel.[ch] (e_meeting_time_selector_set_read_only): new function. (e_meeting_time_selector_construct): store some missing buttons in the EMeetingTimeSelector structure. * gui/dialogs/schedule-page.c (schedule_page_construct): connect to "client_changed" signal on the page. (client_changed_cb): new callback. (sensitize_widgets): new function. (schedule_page_fill_widgets): call sensitize_widgets(). 2004-06-10 Rodrigo Moya * gui/e-cal-model.c (e_cal_view_objects_modified_cb): removed g_assert call, since we shouldn't crash when getting wrong notifications from a backend. 2004-06-10 JP Rosevear * gui/gnome-cal.c (gnome_calendar_on_date_navigator_selection_changed): only do the range selected hack in one case 2004-06-10 JP Rosevear * gui/gnome-cal.c (setup_widgets): set 6 weeks shown (display_view): ditto 2004-06-10 Rodrigo Moya Fixes #58748 * gui/gnome-cal.c (setup_widgets): set the timezone on all views when creating them. 2004-06-10 Rodrigo Moya * gui/e-calendar-table.c (e_calendar_table_init): don't set the "bg_color_column" property on the ECellToggle class. 2004-06-10 Rodrigo Moya Fixes #58799 * gui/e-calendar-view.c (e_calendar_view_delete_selected_occurrence): Use the timezone for getting the RECUR-ID from the instance start date if available. Also, use dates only as the recurrence ID, and do nothing if not a recurrent appointment. 2004-06-09 JP Rosevear Fixes #59242, #57404, ##55394 * gui/gnome-cal.c (get_times_for_views): calculate the work week, week, and month views more exactly (update_adjustment): update the view based on week view scrolling (setup_widgets): listen for the scroll bar moving on the week views (gnome_calendar_update_date_navigator): adjust for compressed weekends in the month view (gnome_calendar_on_date_navigator_selection_changed): ditto * gui/e-week-view.h: add protos * gui/e-week-view.c (time_range_changed_cb): calculate the base_date and first_day_shown more simply, allows multi-week selection to work better; update the base date when told to do so (e_week_view_init): init update_base_value var (e_week_view_get_update_base_date): accessor (e_week_view_set_update_base_date): ditto 2004-06-08 Rodrigo Moya Fixes #57578 * gui/e-calendar-view.c (on_move_to, on_copy_to): simplified to just call transfer_selected_items() with the approppriate arguments. (transfer_selected_items): new function to transfer all selected items to another calendar. (transfer_item_to): added missing implementation. 2004-06-08 Rodrigo Moya Fixes #57579 * gui/dialogs/select-source-dialog.c (select_source_dialog): start with the OK button disabled. (primary_selection_changed_cb): enable/disable the OK button depending on the selection on the ESourceSelector. 2004-06-08 Rodrigo Moya * gui/dialogs/comp-editor.[ch] (comp_editor_notify_client_changed): new function for notifying all pages of the client change. (page_client_changed_cb): no need for this callback. (comp_editor_append_page): no need to connect to "client_changed" signal on the pages. * gui/dialogs/comp-editor-page.c (comp_editor_page_notify_client_changed): re-added the call to comp_editor_page_set_e_cal(), the client was not being set anywhere. * gui/dialogs/event-page.c (source_changed_cb): use comp_editor_notify_client_changed() so that all pages get informed of the client change. * gui/dialogs/task-page.c (source_changed_cb): ditto. 2004-06-08 Rodrigo Moya * gui/dialogs/comp-editor-page.c (comp_editor_page_notify_client_changed): do not set the private client here, it is set in comp-editor.c. * gui/dialogs/event-page.c (sensitize_widgets): new function. (source_changed_cb): call sensitize_buttons(). * gui/dialogs/recurrence-page.c (sensitize_buttons): new function, to deal correctly with the sensitivity of all widgets in the page. (recurrence_page_fill_widgets, type_toggled_cb, client_changed_cb): call sensitize_buttons() instead of sensitize_recur_widgets(). (recurrence_page_construct): g_signal_connect_after for "client_changed", to get notifications after CompEditorPage gets his. * gui/dialogs/alarm-page.c (sensitize_buttons): sensitize the missing widgets in the page. (alarm_page_construct): g_signal_connect_after for "client_changed", to get notifications after CompEditorPage gets his. 2004-06-08 JP Rosevear * gui/e-week-view.c (e_week_view_do_key_press): cast week view correctly 2004-06-08 Rodrigo Moya * gui/dialogs/recurrence-page.c (recurrence_page_construct): connect to "client_changed" signal on the page. (client_changed_cb): new callback. * gui/dialogs/alarm-page.c (sensitize_buttons): fixed missing stuff in last commit. 2004-06-08 Rodrigo Moya Fixes #59650 * gui/dialogs/alarm-page.c (alarm_page_construct): connect to "client_changed" signal on the page. (client_changed_cb): new callback. (sensitize_buttons): added code for dealing with read only calendars and disable/enable buttons approppriately. 2004-06-07 Dan Winship * gui/dialogs/comp-editor.c (pixmaps): s/stock_save_as/stock_save-as/ 2004-06-07 Rodrigo Moya * gui/e-tasks.c (e_tasks_add_todo_source): open task lists asynchronously. (client_cal_opened_cb): callback from the client when opened. * gui/gnome-cal.c (client_cal_opened_cb): disconnect from all signals of the client when opening it fails. Clean up the status messages correctly, based on source type. (open_ecal): for tasks, use e_calendar_table_set_status_message not e_calendar_view_set_status_message. (gnome_calendar_remove_source_by_uid): call update_query only when removing calendars, not tasks lists. (update_query): set meaningful status messages. 2004-06-06 Vardhman Jain * Bug #36247 * gui/e-itip-control.c (write_html, set_date_label): Changes to improve the performance of _(str) function call on strings str of the type str to avoid translation of tag. 2004-06-04 * gui/gnome-cal.c: define G_MAXINT32 if it isn't already 2004-06-04 JP Rosevear Fixes #58739 * gui/migration.c (migrate_calendars): guard against NULL gconf_val 2004-06-04 JP Rosevear Fixes #59058 * gui/gnome-cal.c (gnome_calendar_purge): make purging actually work 2004-06-04 JP Rosevear * gui/dialogs/task-page.c (task_page_fill_widgets): guard against the text value being NULL * gui/dialogs/event-page.c (event_page_fill_widgets): add guards here as well 2004-06-03 Jeffrey Stedfast * conduits/calendar/calendar-conduit.c (calconduit_load_configuration): If the last_uri string value is the Evolution 1.4 URI, change it to the new URI. Fixes bug #54134. 2004-06-03 Rodrigo Moya Fixes #59481 * gui/e-tasks.c (set_status_message): don't use vsprintf with NULL strings, crashes on FreeBSD. 2004-06-03 Rodrigo Moya * gui/dialogs/comp-editor-page.c (comp_editor_page_notify_client_changed): update the internal client when it changes. 2004-06-03 Rodrigo Moya Fixes #56875 * gui/dialogs/event-editor.c (event_editor_construct): connect to "client_changed" signal on the EventPage. (client_changed_cb): set menu sensibility when the client changes. * gui/dialogs/task-editor.c (task_editor_construct): connect to "client_changed signal on the TaskPage. (client_changed_cb): set menu sensibility when the client changes. 2004-06-02 JP Rosevear * gui/alarm-notify/alarm-notify.c (process_removal_in_hash): free the correct uri, preventing bad memory corruption (list_changed_cb): track the removals in a list so we don't clobber the hash table data during the foreach loop 2004-06-02 Chris Toshok * gui/migration.c (migrate_calendars): remove absolute_uri from ESource's. (migrate_tasks): same. 2004-06-02 Rodrigo Moya * gui/e-meeting-list-view.c (start_addressbook_server): removed pre-completion code, not needed anymore. (emlv_finalize): no need to unref the book anymore. (emlv_init): don't call start_addressbook_server. * gui/dialogs/copy-source-dialog.c (copy_source): fixed leak and pass the correct icalcomponent to e_cal_modify_object. 2004-06-02 Rodrigo Moya Fixes #59333 * gui/dialogs/task-page.c (task_page_fill_widgets): guard against list items being NULL. 2004-06-02 Larry Ewing * gui/e-tasks.c (table_drag_data_delete): add a drag delete handler. (table_drag_data_get): support text/vcard drags. (setup_widgets): setup the etable as a drag source. * gui/tasks-component.c: add source selector Drag & Drop handlers. 2004-06-01 Larry Ewing * gui/dialogs/calendar-setup.c: rename can_add to is_mutable, add sensitivity logic for both readonly and mutable cases. The esource attributes are a complete mess and need discussion. * gui/dialogs/calendar-setup.glade: remove edit dialogs and name the tables. 2004-06-01 Rodrigo Moya Fixes #59369 * gui/e-calendar-view.c (clipboard_get_text_cb): don't pass NULL strings to libical functions. 2004-05-31 Priyanshu Raj * Bug #51968 "Invite others.." button confusing in Appointment editor dialog(Fixed)" 2004-05-29 Priyanshu Raj * Bug #48134: Menu items in Scheduling tab should have sentence capitalization (Fixed) 2004-05-28 Kidd Wang * gui/e-week-view.c: (e_week_view_event_move), (e_week_view_get_day_offset_of_event): a more straightforward way to calculate the offset of a day within the week. 2004-05-26 Jeffrey Stedfast Fix for bug #57818. * gui/e-tasks.c (setup_widgets): Same. * gui/gnome-cal.c (setup_widgets): Updated to pass a set of bitflags to cal_search_bar_new(). * gui/cal-search-bar.c (cal_search_bar_new): Now takes a bit flag argument specifying which search options to present. (cal_search_bar_construct): Same as above. Construct the search menu to use based on the bit flags. * gui/apps_evolution_calendar.schemas.in.in: Changed the default "Tasks due today" colour to be a light-blue (one of the default colour values in the colour picker dialog). Fixes bug #53412. 2004-05-26 Rodrigo Moya Fixes #57759 * gui/gnome-cal.c (gnome_calendar_remove_source_by_uid): remove all queries we've got for the removed source. 2004-05-26 Kidd Wang * gui/e-week-view.c: (e_week_view_event_move), (e_week_view_get_day_offset_of_event): a more straightforward way to calculate the offset of a day within the week. 2004-05-26 Kidd Wang * gui/e-week-view.c: (e_week_view_event_move), (e_week_view_change_event_time): In week view all-day events should keep all-dayness when moved around. 2004-05-25 Larry Ewing * gui/dialogs/calendar-setup.c: remove now unused functions. (source_group_can_add): fix can add logic, remove more unused functions. * gui/dialogs/calendar-setup.c (calendar_setup_edit_task_list): use the new dialog. (calendar_setup_edit_calendar): use the new dialog. (key_press_event): look for escape press and destroy dialog. 2004-05-25 Jeffrey Stedfast * gui/dialogs/url-editor-dialog.c (init_widgets): Use gtk_window_set_icon_list() here instead of gtk_window_set_icon(). * gui/dialogs/select-source-dialog.c (select_source_dialog): Use gtk_window_set_icon_list() here instead of gtk_window_set_icon(). * gui/dialogs/calendar-setup.c (source_to_dialog): Huh?? Why are integer colours in an array of char*? Fixed to be an array of guint32. * gui/dialogs/changed-comp.c (changed_component_dialog): Use gtk_window_set_icon_list() here instead of gtk_window_set_icon(). * gui/dialogs/calendar-setup.c (calendar_setup_new_calendar): Don't bother calling tk_window_set_icon() if we are gonna call gtk_window_set_icon_list a few lines later. (calendar_setup_edit_calendar): Same. instead. (calendar_setup_new_task_list): Same. (calendar_setup_edit_task_list): Same. * gui/dialogs/alarm-options.c (alarm_options_dialog_run): Use gtk_window_set_icon_list() instead of gtk_window_set_icon() so gtk can do the Right Thing (tm). 2004-05-25 Jeffrey Stedfast * Makefile.am: Make calendar-errors.xml.h and install the xml file. * calendar-errors.xml: New error definitions file. * gui/gnome-cal.c (backend_died_cb): Use e-error * gui/e-tasks.c (backend_died_cb): Use e-error * gui/dialogs/send-comp.c (send_component_dialog): Use e-error * gui/dialogs/save-comp.c (save_component_dialog): Use e-error * gui/dialogs/delete-comp.c (delete_component_dialog): Use e-error * gui/dialogs/cancel-comp.c (cancel_component_dialog): Use e-error 2004-05-25 Sivaiah Nallagatla * common/authentication.c (auth_func_cb): read the "auth-domain" property to use as component name for e-password calls instead of hard coded component name 2004-05-25 Trent Lloyd Fixes: #57472 * gui/dialogs/alarm-options.c: * gui/dialogs/calendar-setup.c: * gui/dialogs/cancel-comp.c: * gui/dialogs/changed-comp.c: * gui/dialogs/delete-comp.c: * gui/dialogs/delete-error.c: * gui/dialogs/save-comp.c: * gui/dialogs/select-source-dialog.c: * gui/dialogs/send-comp.c * gui/dialogs/url-editor-dialog.c: - Add include of e-icon-factory.h - Set icon on window to be calendar/tasks icon rather than mail icon 2004-05-21 Larry Ewing * gui/dialogs/calendar-setup.c: set the dialog icons appropriately for add task and calendar dialogs. 2004-05-21 Larry Ewing * gui/dialogs/calendar-setup.c: remove references to the uri buttons. * gui/dialogs/calendar-setup.glade: remove uri buttons, make add task window wider and make the button spacing larger. 2004-05-21 H P Nadig * gui/dialogs/calendar-setup.glade: Adjusted the default size of New Calendar Dialog. Fixes 57469. 2004-05-20 JP Rosevear * gui/e-itip-control.c (find_server): proper look for figuring out if the object is on the server 2004-05-20 JP Rosevear * gui/tag-calendar.c (tag_calendar_by_comp): pass the client properly 2004-05-19 Chris Toshok * gui/e-meeting-store.c (start_addressbook_server): use the new e_book_new_* and e_book_open apis. * gui/e-meeting-list-view.c (start_addressbook_server): use the new e_book_new_* and e_book_open apis. 2004-05-19 William Jon McCann * gui/GNOME_Evolution_Calendar.server.in.in: Add menu_label and menu_accelerator. 2004-05-18 JP Rosevear * idl/evolution-calendar.idl: add arg * gui/alarm-notify/alarm-queue.c (edit_component): send a mode type * gui/alarm-notify/alarm-notify.c: add fixme note * gui/comp-editor-factory.c (impl_editExisting): take a editor mode and twist it into a source type (impl_editNew): ditto (open_client): take a source type for creating the client (lookup_open_client): ditto 2004-05-18 JP Rosevear * gui/alarm-notify/notify-main.c (init_alarm_service): just set up the alarm notify object * gui/alarm-notify/alarm-notify.h: update proto * gui/alarm-notify/alarm-notify.c (process_removal_in_hash): process removals using the source list (list_changed_cb): when the list changes, update (load_calendars): initially load the calendars (alarm_notify_init): load the calendars here and don't listen for a selection notification (alarm_notify_add_calendar): get the source type when adding a calendar * gui/alarm-notify/notify-main.c (main): no need to init/shutdown gnome vfs * gui/alarm-notify/config-data.h: new proto * gui/alarm-notify/config-data.c (config_data_get_notify_with_tray): routine to get schema value * gui/alarm-notify/alarm.c (alarm_ready_cb): no timeout checking here, setup_timeout does that (queue_alarm): ditto (setup_timeout): calculate the timeout better * gui/alarm-notify/alarm-queue.c (query_objects_changed_cb): tidy (edit_component): clean up exception handling (display_notification): don't show the tray icon if we aren't notifying with the tray * gui/apps_evolution_calendar.schemas.in.in: add notify_with_tray option 2004-05-18 Kidd Wang * gui/e-week-view.c: (e_week_view_do_cursor_key_up), (e_week_view_do_cursor_key_down), (e_week_view_do_cursor_key_left), (e_week_view_do_cursor_key_right), (e_month_view_do_cursor_key_up), (e_month_view_do_cursor_key_down), (e_month_view_do_cursor_key_left), (e_month_view_do_cursor_key_right), (e_week_view_cursor_key_up), (e_week_view_cursor_key_down), (e_week_view_cursor_key_left), (e_week_view_cursor_key_right), (e_week_view_do_key_press): make the focus movable in week/month view when no events are selected. 2004-05-17 Jeffrey Stedfast * gui/dialogs/event-editor.c: Same. * gui/dialogs/comp-editor.c: Change E_PIXMAP size args over to E_ICON_SIZE_* values. * gui/alarm-notify/alarm-queue.c (tray_icon_blink_cb): Use E_ICON_SIZE enum here. (display_notification): Same. * gui/alarm-notify/alarm-notify-dialog.c (write_html_heading): Use E_ICON_SIZE_DIALOG here. * gui/e-week-view.c (e_week_view_realize): Same as below. * gui/e-day-view.c (e_day_view_realize): Use E_ICON_SIZE_MENU for the icon sizes rather than using pixel values. * gui/calendar-commands.c (pixmaps): Change E_PIXMAP size args over to E_ICON_SIZE_* values. * gui/tasks-component.c (add_popup_menu_item): Use E_ICON_SIZE_MENU * gui/e-timezone-entry.c (e_timezone_entry_init): Use E_ICON_SIZE_BUTTON * gui/e-itip-control.c (write_error_html): Use E_ICON_SIZE enums. (write_html): Same. * gui/e-calendar-view.c (e_calendar_view_set_status_message): Use E_ICON_SIZE_STATUS (setup_popup_icons): Use E_ICON_SIZE_MENU * gui/e-calendar-table.c (e_calendar_table_init): Use E_ICON_SIZE_LIST rather than a hard-coded value of 16 pixels. (e_calendar_table_set_status_message): Use E_ICON_SIZE_STATUS * gui/calendar-component.c (add_popup_menu_item): Use E_ICON_SIZE_MENU rather than hard-coding the pixel size. 2004-05-17 JP Rosevear Fixes #56373 * gui/comp-editor-factory.c (open_client): guess its an event for now 2004-05-17 V Ravi Kumar Raju * gui/e-alarm-list.c (get_alarm_string): * gui/dialogs/alarm-page.glade: Change dropdown list item 'Display a message' for reminder types to 'Pop up an alert' 2004-05-17 Rodrigo Moya * gui/e-calendar-view.c (e_calendar_view_delete_selected_occurrence): if we don't have a RECURRENCE-ID, remove nothing, and use the instance start time for the RECURRENCE-ID as the default. 2004-05-17 H P Nadig Fixes #56885 * gui/dialogs/select-source-dialog.c (select_source_dialog): Changed the window size of source dialog and a minor naming issue. 2004-05-14 Rodrigo Moya * gui/e-day-view.c (process_component): * gui/e-week-view.c (process_component): * gui/gnome-cal.c (gnome_calendar_purge): * gui/tag-calendar.c (tag_calendar_by_comp): * gui/e-cal-model.c (e_cal_model_generate_instances): use e_cal_generate_instances_for_object instead of e_cal_recur_generate_instances. 2004-05-14 Nicel KM * gui/dialogs/alarm-page.c (button_options_clicked_cb): invoke options dialog even if backend does not support email alarms and get email address only if supported. 2004-05-13 Rodrigo Moya * gui/dialogs/alarm-page.c (add_clicked_cb): only get the email address for alarms if the backend supports email alarms. 2004-05-13 Not Zed Fixes #57644. * gui/e-day-view.c (row_deleted_check_cb): strdup the uid, as below. (remove_uid_cb): and free it. * gui/e-week-view.c (row_deleted_check_cb): strdup the uid, 'cause otherwise it can go away later as we delete stuff. (remove_uid_cb): free the uid. * gui/e-week-view-event-item.c (e_week_view_event_item_draw): add some array bounds checking as an attempt to isolate the crash in #57644. 2004-05-11 Not Zed * gui/migration.c (migrate_calendars, migrate_tasks): add GError return for error details & return errors. * gui/calendar-component.c (impl_upgradeFromVersion): fix for api change, and erturn exception if we need to. 2004-05-11 Rodrigo Moya * gui/e-itip-control.c (update_item): get error information from the call to e_cal_receive_objects, and use that as the error message. 2004-05-11 Dan Winship * gui/GNOME_Evolution_Calendar.server.in.in: Remove the calendar and task list controls * gui/main.c (factory): Remove support for the calendar and task list controls * gui/control-factory.c: Remove the property-bag stuff * gui/tasks-control.c: Likewise 2004-05-11 Rodrigo Moya Fixes #53137 * gui/dialogs/schedule-page.c (schedule_page_fill_widgets): check dates from the ECalComponent before using them. 2004-05-11 Rodrigo Moya * gui/e-cal-model-tasks.c (set_due): use/set the DUE date, not the DTEND date. 2004-05-07 Umeshtej Fixes #58014 * gui/e-meeting-list-view.c (process_section):Run the for loop for the number of elements in cards. 2004-05-10 Trent Lloyd * gui/dialogs/select-source-dialog.c: Include gtkhbox.h and gtkvbox.h to fix implicit declaration * gui/dialogs/meeting-page.c: (get_current_page) Cast GTK_ENTRY from GTK_COMBO to fix compiler warning * gui/dialogs/cal-prefs-dialog.c: Remove lvalue casts, produces compiler warnings and are not necessary 2004-05-07 JP Rosevear Fixes #52294 * gui/e-cal-model.c (set_dtstart): set the tzid properly (ecm_is_cell_editable): set check properly * gui/e-cal-model-tasks.c (set_due): set the tzid properly (ecmt_is_cell_editable): set check properly * gui/e-cal-model-calendar.c (set_dtend): set the tzid properly (ecmc_is_cell_editable): kill fixme and set check properly 2004-05-07 JP Rosevear * gui/e-cal-model.c (ecm_is_cell_editable): fix comment and check * gui/e-cal-model-tasks.c (ecmt_set_value_at): set a parent field properly (ecmt_is_cell_editable): fix comment and check 2004-05-06 Larry Ewing * gui/dialogs/calendar-setup.c (source_to_dialog): use random color for calendar default. 2004-05-05 JP Rosevear Fixes #58025 * gui/gnome-cal.c (set_search_query): kill warning (setup_config): don't set time out here (setup_widgets): set it here (gnome_calendar_destroy): clear the time out * gui/e-tasks.c (search_bar_sexp_changed_cb): kill warning (setup_config): don't set time out here (setup_widgets): set it here and remember the time out id (e_tasks_destroy): clear the time out 2004-05-05 Larry Ewing * gui/dialogs/calendar-setup.c: make sure that we don't crash if there are no sources. (calendar_setup_new_task_list): fix the previous fix to work if there are sources. 2004-05-04 Larry Ewing * gui/dialogs/calendar-setup.c: fix logic error. (source_group_can_add): helper function to fix groupwise case. I'm still not happy with this but it will work for now. * gui/dialogs/calendar-setup.c (source_to_dialog): convert units. (dialog_to_source): convert time units. * gui/dialogs/calendar-setup.glade. name the unit option menus. 2004-05-03 Rodney Dawes * gui/dialogs/select-source-dialog.c (select_source_dialog): Make this dialog be HIG-compliant and accessible 2004-05-03 Edgar Luna Díaz * gui/dialogs/select-source-dialog.c (select_source_dialog): Set the default window size to 276 x 320 Fixes #57298 2004-05-03 Larry Ewing * gui/dialogs/calendar-setup.glade: rename the cancel button. 2004-04-29 Larry Ewing * gui/e-cal-model.c (ecm_get_color_for_component): use the source color if it is set. Yay for ugly colors. * gui/e-cal-model.h: add a color holder to the ECalModelComponent since the return value of the color stuff is const. 2004-05-03 JP Rosevear Fixes #51714 * gui/e-cal-list-view.c (setup_e_table): listen for double click signal (e_cal_list_view_on_table_double_click): edit the appointment that was double clicked on 2004-05-03 JP Rosevear * gui/calendar-component.c (set_info): set the info label (calendar_dates_changed_cb): call back for when the dates of the calendar change (create_component_view): store the info label for later use; listen for date changes to set the info label 2004-05-03 JP Rosevear Fixes #57897 * gui/e-tasks.c (setup_widgets): no need to listen for the deleted signal, the cursor will change in that case 2004-05-03 JP Rosevear * gui/e-cal-model-tasks.c (set_completed): remove useless debug statement 2004-05-03 JP Rosevear * gui/tasks-component.c (set_info): set the info label message (model_changed_cb): call above (table_selection_change_cb): ditto (model_rows_inserted_cb): ditto (model_rows_deleted_cb): ditto (create_component_view): remember the info in the view struct; listen for events that require the info label to be updated 2004-05-03 JP Rosevear Fixes #57899 * gui/e-day-view.c (e_day_view_do_key_press): bail if the client is read only (or we get an error trying to find out) * gui/e-week-view.c (e_week_view_do_key_press): ditto 2004-05-03 JP Rosevear Fixes #57894 * gui/gnome-cal.c (gnome_calendar_new_task): make sure we use the default component of the correct model 2004-04-30 Rodney Dawes * gui/alarm-notify/alarm-notify-dialog.c (alarm_notify_dialog): * gui/alarm-notify/alarm-notify.glade: Update the alarm notify dialog to be HIG compliant Fixes #41224 2004-04-30 Gary Ekker * gui/e-tasks.c: (e_tasks_init): Set up the model to use the correct query. Setup callbacks for gconf changes. Add an idle timeout to hide completed items. Add update_view, update_view_cb, and config_hide_completed_tasks_changed_cb to update the model view. * gui/gnome-cal.c: ditto * gui/calendar-config.h: Add notifications for hide_completed_tasks settings. * gui/calendar-config.c: ditto 2004-04-30 Not Zed * gui/dialogs/meeting-page.c (get_widgets): make the entry non-editable. Quick fix for #48132 (could convert to optionmenu but then we need to change again for gnome >?2.6). 2004-04-29 Rodney Dawes * gui/dialogs/cal-prefs-dialog.glade: Update the prefs dialog pages for the calendar and tasks components to be HIG compliant 2004-04-29 JP Rosevear * gui/tasks-component.h (tasks_component_peek_source_list): remove prototypes * gui/tasks-component.c (source_removed_cb): unselect the source in the selector if source removed from calendar (create_component_view): create the activity handler and listen to source remove signal * gui/gnome-cal.h: add signals, protos * gui/gnome-cal.c (gnome_calendar_class_init): add source added and removed signals (client_cal_opened_cb): emit source removed signal (open_ecal): set the status message (backend_died_cb): emit source removed signal (gnome_calendar_set_activity_handler): allow an activity handler to be set (gnome_calendar_add_source): emit source added signal (gnome_calendar_remove_source): emit source removed signal (display_view): update the active activity handler * gui/e-tasks.h: add signal prototypes * gui/e-tasks.c (e_tasks_class_init): add source added and removed signals (backend_died_cb): emit source removed signal (e_tasks_add_todo_source): emit source added/removed signals (e_tasks_remove_todo_source): emit source removed signal * gui/e-calendar-view.h: add proto * gui/e-calendar-view.c (e_calendar_view_set_activity_handler): allow an activity handler to be set (e_calendar_view_set_status_message): use private activity handler (if any) to set status message * gui/e-calendar-table.h: add data member and proto * gui/e-calendar-table.c (e_calendar_table_set_activity_handler): allow an activity handler to be set (e_calendar_table_set_status_message): use private activity handler (if any) to set status message * gui/e-calendar-marshal.list: add extra marshallers * gui/calendar-component.h: kill protos * gui/calendar-component.c (source_removed_cb): unselect the source in the selector if source removed from calendar (create_component_view): create the activity handler and listen to source remove signal 2004-04-29 JP Rosevear * gui/dialogs/comp-editor.c (send_timezone): ditto * gui/dialogs/task-page.c (task_page_fill_component): kill warning 2004-04-29 JP Rosevear * gui/e-cal-model.c (e_cal_model_set_default_client): kill warning 2004-04-29 Jeffrey Stedfast * gui/migration.c (migrate_pilot_data): Removed the terminating NULL vararg since we don't need it for g_strdup_printf, it was only needed when it was g_build_filename(). Gets rid of a gcc warning. 2004-04-29 Not Zed * gui/e-itip-control.c (e_itip_control_set_data): check we find any usable components of the icalendar entry before dereferncing it. Fixes crash in #57264. 2004-04-28 Not Zed * gui/e-itip-control.c (object_requested_cb): dont shadow source with another source in the fallback case. Related to #54094. 2004-04-27 JP Rosevear * gui/cal-search-bar.c: disable comment searching which is currently useless 2004-04-27 JP Rosevear Fixes #52270 and #57593 * gui/e-cal-model-tasks.c (ecmt_set_value_at): remove checks for start after due (ecmt_duplicate_value): copy the completed and due dates properly (ecmt_fill_component_from_model): only set the percent and status if the completion isn't set (ensure_task_partially_complete): ensure the task is not complete, in progress and make the percentage sensible if its 0 or 100 (set_status): make sure the status and related vars are set properly (ecmt_set_value_at): handle status (ecmt_fill_component_from_model): make sure the click to add fields don't clobber each other (ecmt_is_cell_editable): status is editable * gui/e-cal-model-calendar.c (ecmc_duplicate_value): copy the dtend correctly 2004-04-27 Larry Ewing * gui/dialogs/calendar-setup.c: hook up the color picker and test buttons in the new task dialog. * gui/dialogs/calendar-setup.glade: fix visibility and color picker names. 2004-04-27 Larry Ewing * gui/dialogs/calendar-setup.c (new_calendar_test_uri): add handler for test button. (calendar_setup_new_calendar): connect test button, fill in color picker member. (source_to_dialog): set the color picker color if the source has one. (dialog_to_source): set the source color. 2004-04-27 Jeffrey Stedfast * gui/migration.c (migrate_tasks): Fixed the version checks for migrating pilot data. (migrate_calendars): Same. (migrate_pilot_data): Doh. Take a third argument to specify what component we are migrating ("todo" vs "calendar") so that we can compare against the correct filename. Might help :-) (migrate_pilot_db_key): Just set an empty value for the data since there's no way to actually get it and I don't think it really matters anyway. 2004-04-27 Kidd Wang * gui/e-cal-model-tasks.c: (ecmt_set_value_at): compare the start time and the due time only when both are not null. 2004-04-26 Jeffrey Stedfast * gui/migration.c (migrate_pilot_data): New function to migrate pilot data. (migrate_calendars): Migrate pilot data if upgrade version <=1.5.9 (migrate_tasks): Same. 2004-04-23 Rodney Dawes * gui/alarm-notify/notify-main.c (main): Call e_icon_factory_init () Fixes #57497 2004-04-22 Jeffrey Stedfast * conduits/calendar/calendar-conduit.c (start_calendar_server): Use e_cal_open_default() instead of e_cal_open(). (map_name): Changed the path for the pilot map filename. (pre_sync): Changed the query to "#t" instead of "(#t)" and removed a duplicate block of code (seems to have been a paste-o?). * conduits/todo/todo-conduit.c (start_calendar_server): Use e_cal_open_default() instead of e_cal_open(). (map_name): Changed the path for the pilot map filename. (pre_sync): Changed the query to "#t" instead of "(#t)" and removed a duplicate block of code (seems to have been a paste-o?). 2004-04-22 JP Rosevear Fixes #56092 * gui/e-day-view.c (e_day_view_show_popup_menu): weak ref for the menu to be destroyed (popup_destroyed_cb): reset popup_event_num and popup_event_day * gui/e-week-view.c (e_week_view_show_popup_menu): weak ref for the menu to be destroyed (popup_destroyed_cb): reset the popup_event_num 2004-04-21 JP Rosevear * gui/calendar-component.c (create_new_event): make sure we don't deref a NULL pointer 2004-04-21 JP Rosevear Fixes #56504 * gui/gnome-cal.c (gnome_calendar_destroy): no need to destroy the creatable item handler (gnome_calendar_set_ui_component): don't do the creatable item stuff here * gui/e-tasks.c (e_tasks_set_ui_component): don't do the creatable item stuff here (e_tasks_destroy): no need to destroy creatable item handler * gui/e-calendar-table.c (e_calendar_table_set_status_message): comment out temporarily * gui/e-calendar-view.c (e_calendar_view_set_status_message): ditto * gui/calendar-component.c: switch to using per component view information; don't listen for config changes to the primary selection and selection so that different windows can have different calendar selections; use a local creatable items handler so that the new button is associated with the right window when setting the default times * gui/tasks-component.c: ditto 2004-04-21 JP Rosevear * gui/e-tasks.c (set_timezone): only set the preview zone if the preview has been created (setup_widgets): set the default zone for the preview pane 2004-04-21 JP Rosevear Fixes #55797 * gui/calendar-component.c (create_new_event): force an all day event if we are viewing the week, month or list view, which mimics double click in the view 2004-04-21 Frederic Crozat * gui/migration.c: (migrate_calendars): Fix crash when gconf value are not existing in the gconf database. 2004-04-21 Not Zed ** Fixes #57034. * gui/dialogs/calendar-setup.c (create_new_source_with_group): NULL out source if we can't open the calendar. (source_group_menu_add_groups): if the group is readonly, then desensitise it. (source_group_menu_add_groups): return the first non-readonly calendar index. (calendar_setup_new_calendar): set the group history to the first non-readonly group. (calendar_setup_new_task_list): same. * gui/gnome-cal.c (gnome_calendar_set_ui_component): fix for user_creatable_items api changes. * gui/e-tasks.c (e_tasks_set_ui_component): fix for user_creatable_items api changes. 2004-04-19 Michael Terry * gui/GNOME_Evolution_Calendar.server.in.in: * gui/calendar-commands.c: * gui/calendar-component.c: * gui/e-calendar-table.c: * gui/e-calendar-view.c: * gui/e-day-view-main-item.c: * gui/e-day-view-top-item.c: * gui/e-day-view.c: * gui/e-day-view.h: * gui/e-itip-control.c: * gui/e-timezone-entry.c: * gui/e-week-view-event-item.c: * gui/e-week-view.c: * gui/e-week-view.h: * gui/tasks-component.c: * gui/alarm-notify/alarm-notify-dialog.c: * gui/alarm-notify/alarm-queue.c: * gui/dialogs/comp-editor.c: * gui/dialogs/event-editor.c: Update the calendar to use the icon theme through the EIconFactory object in e-util 2004-04-19 JP Rosevear * gui/gnome-cal.c (set_view): take a range_selected boolean for internal use (gnome_calendar_set_view): use above (display_view): use priv->range_selected, we'll set it correctly before this (display_view_cb): only pass focus boolean (gnome_calendar_on_date_navigator_selection_changed): set the view so the view menu is accurate 2004-04-18 JP Rosevear Fixes #54021 * importers/icalendar-importer.c (update_single_object): ensure UID exists 2004-04-18 JP Rosevear Fixes #53124 * gui/e-tasks.c: remove preview pieces, they are in their own class now; use the new class for preview * gui/e-cal-component-preview.[hc]: implement a preview area for tasks and events 2004-04-17 Trent Lloyd * gui/e-calendar-view.c: include libecal/e-cal-component.h to kill implicit declaration of e_cal_component_get_recur_id_as_string at line 869. 2004-04-15 Gary Ekker Fixes #52271 * gui/e-cal-model-tasks.c: (set_percent): shouldn't call ensure_task_not_complete here, it removes the percent property that we just set. 2004-04-15 JP Rosevear * gui/dialogs/task-page.c (task_page_fill_component): don't actually check if start date is after due date, its perfectly valid for that to occur 2004-04-15 JP Rosevear Fixes #53903 * gui/dialogs/meeting-page.c (meeting_page_fill_widgets): show/hide add button properly (change_clicked_cb): ditto * gui/dialogs/comp-editor.c (needs_send_cb): call back when "needs_send" (page_changed_cb): use accessor 2004-04-15 JP Rosevear * gui/dialogs/comp-editor.c (save_comp): stop listening to changes since we are just going to save and close (save_cmd): remove, its ok since we are toasting menus shortly anyhow (obj_modified_cb): no need to look at update flag (obj_removed_cb): ditto 2004-04-15 Gary Ekker * gui/calendar-component.h: move the calendar publishing initialization from createControls to main.c * gui/calendar-component.c: (create_controls): Ditto * gui/main.c: (initialize): Ditto * gui/dialogs/cal-prefs-dialog.c: (url_list_changed): remove a gfree that was freeing a before it should have been. Also removed cruft from a previous attempt to fix the crash. 2004-04-15 Rodrigo Moya * gui/dialogs/select-source-dialog.c (select_source_dialog): added some spacing. * gui/e-calendar-view.c (e_calendar_view_delete_selected_occurrence): use the DTSTART for the recur-id if it's not available. 2004-04-14 Larry Ewing * gui/calendar-component.c (selector_tree_drag_motion): fix missing parameters, wow that was a mess. * gui/dialogs/calendar-setup.glade: add the new "new" dialogs, remove the old druids. * gui/dialogs/calendar-setup.c (calendar_setup_new_calendar): use the new dialogs, colors are still not functional. (calendar_setup_new_task_list): use the new dialogs, with no colors. 2004-04-14 JP Rosevear Fixes #56613 * gui/gnome-cal.h: add proto * gui/gnome-cal.c (client_cal_opened_cb): key the clients by uid (backend_died_cb): ditto (gnome_calendar_add_source): ditto (gnome_calendar_remove_source): use remove_source_by_uid (gnome_calendar_remove_source_by_uid): new function to remove a source by uid (gnome_calendar_set_default_source): key the clients by uid * gui/calendar-component.c (update_task_selection): the source could be NULL if the source was deleted rather than unchecked (update_primary_task_selection): look at the task source list 2004-04-14 JP Rosevear Fixes #56553 * importers/icalendar-importer.c (prepare_events): don't double free or continue, we need to move to the next item (prepare_tasks): don't continue, move to the next item 2004-04-14 Not Zed * gui/tasks-component.c (impl_createControls): Same as below for the tasks component. * gui/calendar-component.c (impl_createControls): add the info area label widget to the sidebar control (c&p the addressbook code). 2004-04-12 Gary Ekker Fixes #56628 * gui/calendar-component.c (create_new_event): Add informational dialog when user attempts event creation in read-only calendar. 2004-04-09 Gary Ekker * gui/dialogs/url-editor-dialog.c: Fixed to use e-passwords. * gui/dialogs/cal-prefs-dialog.c: Fixed crash and bugs created by changes made for instant apply. * gui/itip-utils.c: Fixed to use e-passwords. * gui/e-pub-utils.c: Fixed to use e-passwords. (just_published): Fixed error in logic. (e_pub_publish): Fixed crash if ESource is NULL. 2004-04-09 Chris Toshok * gui/dialogs/e-delegate-dialog.c (e_delegate_dialog_construct): EABDestination -> EDestination. (e_delegate_dialog_get_delegate): same. (e_delegate_dialog_get_delegate_name): same. * gui/dialogs/alarm-options.c (alarm_to_malarm_widgets): EABDestination -> EDestination. (malarm_widgets_to_alarm): same. * gui/e-select-names-editable.c (e_select_names_editable_get_address): EABDestination -> EDestination. (e_select_names_editable_get_name): same. * gui/e-meeting-list-view.c (process_section): EABDestination -> EDestination. (select_names_ok_cb): same. 2004-04-09 Dan Winship * gui/gnome-cal.c (gnome_calendar_set_ui_component): Create an EUserCreatableItemsHandler for the view if there isn't one yet, and then activate it. (gnome_calendar_destroy): destroy it. * gui/calendar-component.c (impl__get_userCreatableItems): add object/folder flags to items. * gui/e-tasks.c (e_tasks_set_ui_component): Create an EUserCreatableItemsHandler for the view if there isn't one yet, and then activate it. (e_tasks_destroy): destroy it. * gui/tasks-component.c (impl__get_userCreatableItems): add object/folder flags. Change "Task List" to "Tasks Group" per new specs. * gui/calendar-commands.c (calendar_control_deactivate): clear the GnomeCal's ui_component rather than setting it again 2004-04-07 Jeffrey Stedfast * gui/dialogs/cal-prefs-dialog.c: Fixed to be instant-apply. 2004-04-07 JP Rosevear * gui/e-cal-model.c (e_cal_model_set_default_client): just add the client, we have protection against re-adding it any how (cal_opened_cb): stop listening to the open signal 2004-04-07 JP Rosevear * gui/gnome-cal.c (gnome_calendar_dayjump): remove extra set view params (gnome_calendar_set_view): simplify, just set the current view id and let the gal view stuff do the rest (display_view): modify from set_view, don't set the view id here or update the default view config setting (display_view_cb): update the date navigator (gnome_calendar_construct): kill the default view stuff, gal view handles that (gnome_calendar_on_date_navigator_selection_changed): use display_view * gui/e-week-view.c (time_range_changed_cb): ditto (e_week_view_set_selected_time_range): just set the selection, don't fool with the base date (e_week_view_on_button_press): do a full day event if double clicked on * gui/e-day-view.c (time_range_changed_cb): only set the selection if we can't preserve an existing selection * gui/control-factory.c (set_prop): allow list view, remove default view usage * gui/calendar-config.h: remove protos * gui/calendar-config.c: remove default view calls * gui/calendar-commands.c (show_day_view_clicked): remove extra params to gnome_calendar_set_view (show_work_week_view_clicked): ditto (show_week_view_clicked): ditto (show_month_view_clicked): ditto (show_list_view_clicked): ditto * gui/apps_evolution_calendar.schemas.in.in: remove default view setting, gal view remembers this for us 2004-04-05 JP Rosevear * gui/e-week-view.c (time_range_changed_cb): only select one day 2004-04-05 Rodrigo Moya * gui/alarm-notify/alarm-queue.c: removed commented code. * gui/alarm-notify/notify-main.c (main): removed useless call to set the POA after construction. 2004-04-05 Rodrigo Moya Fixes #56316 * gui/dialogs/comp-editor-page.[ch]: added "fill_timezones" virtual method to CompEditorPage class. (comp_editor_page_fill_timezones): new function. (comp_editor_page_class_init): initialize new virtual method. * gui/dialogs/event-page.c (event_page_fill_timezones, event_page_class_init): * gui/dialogs/task-page.c (task_page_fill_timezones, task_page_class_init): * gui/dialogs/task-details-page.c (task_details_page_fill_timezones, task_details_page_class_init): implemented new virtual method for pages dealing with timezones. * gui/dialogs/comp-editor.c (save_comp): call the "fill_timezones" method on all pages, and call... (send_timezone): ...this function for each hash table item. 2004-04-01 Rodrigo Moya * gui/gnome-cal.c (client_cal_opened_cb): set the default timezone on all clients when opened. 2004-04-01 Radek Doulik * gui/e-calendar-view.c (e_calendar_view_delete_selected_occurrence): fix small typo 2004-04-01 Rodrigo Moya * gui/dialogs/recur-comp.c (recur_component_dialog): return correct values (boolean). 2004-03-31 JP Rosevear * gui/migration.c (migrate_calendars): make sure we unset the float value for the panes if converting from 1.4 and earlier 2004-03-31 JP Rosevear Fixes #56120 * gui/gnome-cal.c (append_category_cb): update the correct element (client_categories_changed_cb): pass the array, not a reference to it 2004-03-31 Rodrigo Moya * gui/gnome-cal.c: fixed documentation typos. 2004-03-31 Sarfraaz Ahmed * gui/config-control.c (set_prop) : Replaced add_event_source with add_source and passed the VEVENT type as argument. 2004-03-30 William Jon McCann * gui/dialogs/calendar-setup.glade: * gui/dialogs/calendar-setup.c (new_task_list_finish) (calendar_setup_new_task_list, calendar_setup_edit_task_list): add remote calendar setup page to task list setup assistant and edit dialog. Remove separators from dialog. 2004-03-29 Larry Ewing * gui/calendar-component.c (selector_tree_drag_data_received): deal with the action type a properly. in the normal case. * gui/calendar-component.c (selector_tree_drag_data_received): call drag_finish properly, change the uid. (selector_tree_drag_motion): set drag status properly. 2004-03-29 William Jon McCann * gui/tasks-component.c (delete_task_list_cb): * gui/calendar-component.c (delete_calendar_cb): don't require client to be loaded in order to remove the source * gui/migration.c (create_task_sources, migrate_tasks): create On The Web source group for tasks. 2004-03-29 Hari Prasad Nadig * gui/goto-dialog.glade: Naming issue, Go to Date -> Select Date, Go to Today -> Select today. Solves 48293 * gui/e-calendar-view.c: gives aid to the above change. 2004-03-29 Rodrigo Moya * gui/alarm-notify/alarm-queue.c (query_objects_changed_cb): removed misplaced return statement that prevented the rest of the objects list to be processed. 2004-03-29 Kidd Wang * gui/e-calendar-view.c: (e_calendar_view_class_init): remove the EVENT_MOVE signal which was binded to Alt + Arrows. * gui/e-calendar-view.h: ditto. * gui/e-day-view.c: (e_day_view_class_init), (e_day_view_do_key_press), (e_day_view_event_move): handle Alt + Arrows in the more general place e_day_view_do_key_press so that we can avoid the conflicting accessible key. When an appointment is selected, pressing Alt + Arrows causes it to be moved around. Otherwise, pressing Alt + LEFT/RIGHT will move the focus to the same day in the previous/next week. * gui/e-week-view.c: (e_week_view_class_init), (e_week_view_event_move), (e_week_view_do_key_press): ditto. 2004-03-26 JP Rosevear * gui/e-cal-model.c (update_e_cal_view_for_client): guard against the case that we redo queries while still waiting for a client to open 2004-03-26 JP Rosevear Fixes #53134 * gui/e-cal-model.c (get_description): make sure to set the string to NULL so that if this component doesn't have a description we don't double free next time we are called 2004-03-26 JP Rosevear * gui/migration.c (migrate_calendars): no need to explicitly add the contacts group, the create function does this properly 2004-03-26 JP Rosevear * gui/migration.c (migrate_calendars): make sure we always sync the source list and just do it once; unref the sources we get (migrate_tasks): make sure we always sync the source list and just do it once 2004-03-26 JP Rosevear Fixes #55648 * gui/print.c (print_todo_details): get the default from the model * gui/gnome-cal.h: remove and update protos * gui/gnome-cal.c (update_query): the clients and client_list members are now arrays of source types (setup_widgets): default the query to everything for tasks, cast the config items (gnome_calendar_init): init all the client hashs (gnome_calendar_destroy): clean them up, clean up all categories (client_cal_opened_cb): handle based on source type (append_category_cb): don't track the size in the closure (client_categories_changed_cb): do all the merging here (backend_died_cb): handle based on source type (gnome_calendar_construct): we don't special case the task stuff any more (gnome_calendar_get_default_client): return the default of the current view (gnome_calendar_add_source): take a source type argument and append accordingly (gnome_calendar_remove_source): similar, but remove accordingly (gnome_calendar_set_default_source): take a source type argument and set the default accordingly (gnome_calendar_new_task): use the default of the task model * gui/e-calendar-view.c (e_calendar_view_add_event): kill warning * gui/calendar-component.c (update_uris_for_selection): pass source type when adding/removing (update_uri_for_primary_selection): ditto (update_task_selection): make sure we show the correct list of tasks (update_primary_task_selection): make sure we track the primary task correctly (delete_calendar_cb): pass source type when removing (config_primary_selection_changed_cb): config listener callback for tasks (config_tasks_selection_changed_cb): ditto (impl_createControls): load the initial task selection, listen for changes (calendar_component_init): get the source lists * gui/calendar-commands.c (sensitize_taskpad_commands): get the task pad and then the default client from that 2004-03-26 JP Rosevear * gui/e-cal-model.c (find_client_data): finds the client data for a client (cal_opened_cb): update the query (add_new_client): return client data (e_cal_model_add_client): add the client immediately no matter what, and possibly wait for it to open (remove_client): guard against NULL query (e_cal_model_remove_client): use find_client_data (e_cal_model_dispose): guard against a NULL query 2004-03-25 JP Rosevear * gui/e-cal-model.c (remove_client): fix off by one error when emitting deleted signal 2004-03-25 JP Rosevear Fixes #53499 * gui/gnome-cal.c (setup_widgets): don't give the state file to the list view (set_view): ensure that if the list view was in custom mode it stays that way (display_view_cb): attach to the etable of the list view (gnome_calendar_setup_view_menus): use an etable gal view for the list view and don't set the view twice * gui/e-tasks.c (e_tasks_setup_view_menus): the instance should no longer be per task uri since all the uris are shown together * gui/e-cal-list-view.h: update/add protos * gui/e-cal-list-view.etspec: limit the available columns to what product design agreed on * gui/e-calendar-table.etspec: ditto * gui/e-cal-list-view.c (e_cal_list_view_class_init): ignore update query calls (e_cal_list_view_load_state): make public (e_cal_list_view_save_state): ditto (setup_e_table): don't handle state saving ourselves (e_cal_list_view_construct): ditto (e_cal_list_view_new): ditto (e_cal_list_view_destroy): ditto * gui/calendar-view.c (calendar_view_get_type_code): we don't handle the list view here * gui/calendar-view-factory.c (calendar_view_factory_get_type_code): we don't handle the list view here (calendar_view_factory_get_title): ditto 2004-03-24 Rodrigo Moya * gui/gnome-cal.c (update_query): don't create queries for the clients that are not loaded yet. 2004-03-24 JP Rosevear * gui/gnome-cal.c (client_cal_opened_cb): remove debug code that slipped in 2004-03-24 Danilo Šegan * gui/e-alarm-list.c (get_alarm_duration_string): Use ngettext for handling plural forms (fixes bug #53464). * gui/dialogs/delete-comp.c (delete_component_dialog): Likewise. * gui/e-itip-control.c (write_recurrence_piece): Likewise. 2004-03-23 JP Rosevear Fixes #51948 * gui/dialogs/meeting-page.c (button_press_event): compile this again, determine the row with a different method (button_press_event): pass mpage (meeting_page_construct): listen for button press event * gui/e-meeting-list-view.c: remove commit that wasn't supposed to go in 2004-03-23 JP Rosevear * gui/e-calendar-view.c: make the flow control correct 2004-03-23 JP Rosevear * gui/migration.c (create_calendar_sources, create_task_sources): ensure that only one Personal calendar/task list gets created when moving between minor versions 2004-03-23 JP Rosevear * gui/dialogs/copy-source-dialog.c (copy_source): remove unused variable * gui/e-cal-model.c (e_cal_model_copy_component_data): make the precondition return NULL * gui/control-factory.c (get_prop): make sure this code isn't reached * gui/calendar-component.c (calendar_component_peek_source_selector): cast to kill warning 2004-03-23 Umesh Tiwari For bug#53417 * gui/e-tasks.c: Clear the preview panel after the last task is deleted. 2004-03-23 Alfred Peng * gui/dialogs/alarm-options.c (malarm_widgets_to_alarm): get the mail alarm description message from "malarm_description" instead of "dalarm_description". 2004-03-23 Alfred Peng * gui/alarm-notify/alarm-queue.c (audio_notification): If there is no attachment for a audio reminder, only a message window shows up. Get a beep sound even without attachment for audio reminder. 2004-03-22 Rodrigo Moya * gui/e-calendar-view.c (e_calendar_view_add_event): get the UID from the server on newly created events and set the ECalComponent's UID to that, for further operations. 2004-03-20 Rodrigo Moya * gui/e-calendar-view.c: added 'Copy/Move to Calendar' menu entries. (on_copy_to, on_move_to): callbacks for new menu items. (on_print_event): don't leak selection list. 2004-03-19 JP Rosevear Fixes #55716 * gui/e-cal-model.c (remove_client): unset the default if the client removed was the default 2004-03-19 Rodrigo Moya * gui/calendar-component.c (update_uris_for_selection): if gnome_calendar_add_event_source fails, don't add the client to the internal client list. 2004-03-19 JP Rosevear Fixes #55723 * gui/e-day-view.c (process_component): compare ecalcomponents, not icalcomponents (the compare func is borked), check recurrence changes better (e_day_view_init): just use the model the parent creates * gui/e-week-view.c (process_component): create the temporary item from the correct icalcomp (e_week_view_init): just use the model the parent creates 2004-03-18 Rodrigo Moya * gui/dialogs/select-source-dialog.c (select_source_dialog): create an ESourceSelector instead of a ESourceOptionMenu, to be consistent with the other components, and create a scrolled window to hold the source selector. (primary_selection_changed_cb): callback for "primary_selection_changed" signal in the ESourceSelector. 2004-03-18 Alfred Peng * Fix #51187 on bugzilla of ximian * gui/alarm-notify/alarm-queue.c (query_objects_changed_cb): If "alarms" or "alarms->alarms" is NULL after querying a calendar for the alarms of a particular object, the reuse of "cqa" will probably cause evolution-alarm-notify to crash. So remove "cqa" when "alarms" or "alarms->alarms" is NULL. Otherwise update it. 2004-03-17 hpnadig * gui/dialogs/task-page.glade: Capitalized words changed. Solves 48115. * gui/dialogs/task-details-page.glade: s/Date Completed/Date completed. * gui/e-calendar-table.etspec: Capitalization checked. Solves 48130. 2004-03-17 Gary Ekker Fixes #55292 * gui/e-pub-utils.c (e_pub_publish): fix a crash when trying to publish a NULL component 2004-03-16 Rodrigo Moya * gui/dialogs/select-source-dialog.[ch]: new dialog for allowing the user to select a source. * gui/dialogs/copy-source-dialog.c (copy_source_dialog): use the select_source_dialog function to ask user for the source to use. (source_selected_cb): removed unneeded function. * gui/dialogs/Makefile.am: added new files. 2004-03-16 Rodrigo Moya * gui/calendar-commands.c (calendar_control_sensitize_calendar_commands): check if the selected event has its associated ECalModelComponent. 2004-03-15 JP Rosevear * gui/e-tasks.c (search_bar_sexp_changed_cb): set the search query (e_tasks_init): set the query to be #t by default * gui/e-cal-model.c (redo_queries): use the search query if there is one (and no time is set), make sure to dup the #f 2004-03-15 JP Rosevear * gui/dialogs/comp-editor-page.c (comp_editor_page_fill_widgets): use right cast macro 2004-03-15 JP Rosevear * Rename e-cal-view to e-calendar-view and fix includes * gui/dialogs/comp-editor-page.c (comp_editor_page_fill_widgets): pre-conditions should return FALS * gui/e-cal-model.c (copy_ecdv): return the new struct * gui/Makefile.am: build renamed files 2004-03-15 JP Rosevear Fixes #52253 * gui/print.c (print_week_summary_cb): copy component data * gui/gnome-cal.c (get_times_for_views): calculate the time range for each view (set_search_query): set the search query on the model (set_week_start): set the week start day (week_start_changed_cb): track if it changes (setup_config): set its notification (setup_widgets): update the view times and date navigator (gnome_calendar_init): remove dead values (gnome_calendar_goto_date): just calc the new time and let update_view_times handle it (gnome_calendar_goto): ditto (gnome_calendar_direction): ditto (gnome_calendar_set_selected_time_range): ditto (gnome_calendar_dayjump): ditto (update_view_times): set the time ranges on the models (set_view): use the new preserve day setting (gnome_calendar_set_view): don't update the view times, just switch (gnome_calendar_get_selected_time_range): get the time range (gnome_calendar_on_date_navigator_selection_changed): don't re-update the date navigator, centralize the view setting * gui/e-week-view.c (time_range_changed_cb): handle the time range changing (process_component): move here (model_changed_cb): handle the model changing (update_row): updated a changed row (model_row_changed_cb): update a row (model_cell_changed_cb): ditto (model_rows_inserted_cb): handle events being added (row_deleted_check_cb, remove_uid_cb, model_rows_deleted_cb): handle events being deleted (timezone_changed_cb): handle timezone changing (e_week_view_init): create the model and listen to it (e_week_view_new): don't create the model here (e_week_view_set_selected_time_range): no need to cast (e_week_view_set_first_day_shown): ditto (e_week_view_set_weeks_shown): ditto (e_week_view_update_event_cb): free and copy the data using new routines (e_week_view_foreach_event): step through every event (e_week_view_remove_event_cb): we no longer track allocated status (e_week_view_on_button_release): don't set the seleciton in the calendar (e_week_view_free_events): free the data with the util (e_week_view_add_event): no need to track allocated status (e_week_view_on_adjustment_changed): no need to cast * gui/e-day-view.c (e_day_view_class_init): update query is no longer used via class method (time_range_changed_cb): handle the time range changing (process_component): move here (model_changed_cb): handle the model changing (update_row): updated a changed row (model_row_changed_cb): update a row (model_cell_changed_cb): ditto (model_rows_inserted_cb): handle events being added (row_deleted_check_cb, remove_uid_cb, model_rows_deleted_cb): handle events being deleted (timezone_changed_cb): handle timezone changing (e_day_view_init): create a model, connect to its signals (e_day_view_destroy): we don't have our own query anymore (e_day_view_update_event_cb): free and copy the data using new routines (e_day_view_remove_event_cb): we no longer track allocated status (e_day_view_set_selected_time_range): actually set the selection (e_day_view_recalc_day_starts): no need to cast (e_day_view_recalc_work_week): ditto (e_day_view_update_calendar_selection_time): don't call back to the main calendar (e_day_view_free_event_array): use the free util (e_day_view_add_event): don't track allocated status * gui/e-calendar-marshal.list: add marshaller * gui/e-cal-view.h: remove field * gui/e-cal-view.c: no longer listen for model signals (e_calendar_view_class_init): make the model arg not construct time * gui/e-cal-model.h: update/add protos * gui/e-cal-model.c (e_cal_model_class_init): set the dispose handler and add a time_range_changed signal (e_cal_model_init): defaults for queries (e_cal_model_dispose): dispose of things (e_cal_model_finalize): remove bits that are in dispose now (search_by_uid_and_client): allow NULL client to find any uid (e_cal_view_objects_added_cb): ref the client (update_e_cal_view_for_client): use the full query (remove_client): pre change for each row and emit deleted signals (redo_queries): relaunch the query for each client (e_cal_model_get_time_range): get the time range (e_cal_model_set_time_range): set the time range and redo the queries (e_cal_model_set_search_query): get the search query (e_cal_model_set_search_query): set the search query and redo the queries (e_cal_model_get_component_for_uid): get the component info based on uid (copy_ecdv): copy and ECellDateEditValue (e_cal_model_copy_component_data): copy component data (e_cal_model_free_component_data): unref the client 2004-03-15 Rodrigo Moya Fixes #48112 * gui/calendar-commands.c (calendar_control_sensitize_calendar_commands): disable the 'Delete' menu item on recurring meetings, since 'Delete all Occurrences' already deals with that. 2004-03-15 Rodrigo Moya Fixes #35577 * gui/e-cal-view.c (e_calendar_view_delete_selected_occurrence): if the component is an instance, pass the recurrence ID to e_cal_remove_object_with_mod. Also, make the user confirm the deletion, and send the cancellation message for meetings. 2004-03-12 Not Zed * gui/e-cal-model.c (ecm_initialize_value): return "" instead of NULL if there is no default_category set. Fixes #53419. 2004-03-09 Kidd Wang * gui/e-day-view.c: (e_day_view_finish_long_event_resize): add a call to e_cal_component_commit_sequence since we have changed the property of the component. Whether the new event is all day should also be set properly according to the value of the original event. 2004-03-08 Rodrigo Moya Fixes #48106 * gui/dialogs/alarm-page.glade: s/Send an Email/Send an email. 2004-03-05 Rodrigo Moya * gui/alarm-notify/alarm-notify.c (alarm_notify_init): set a GConf listener callback to list for changes in selected calendars. (alarm_notify_finalize): remove the GConf notification listener. (conf_changed_cb): callback to react on configuration changes. Process the new selected calendars and remove the unselected ones. (process_removal_in_hash): callback to remove unselected calendars. 2004-03-04 Rodrigo Moya Fixes #50294 * gui/e-tasks.c (setup_widgets): connect to "model_rows_deleted" signal on the ETable's model. (model_rows_deleted_cb): callback for clearing the preview widget when the currently selected task is removed. 2004-03-04 Rodrigo Moya * gui/calendar-commands.c (calendar_control_sensitize_calendar_commands): set the sensitivity correctly, depending on whether the command applied to the currently selected event or the default client. (calendar_control_activate): make sure we start with the menu items correctly enabled/disabled. 2004-03-04 Rodrigo Moya Fixes #53496 * gui/dialogs/cal-prefs-dialog.glade: set the same spacing for all tabs in the notebook. 2004-03-04 Rodrigo Moya * gui/dialogs/comp-editor.c (comp_editor_append_page): always add the page. * gui/dialogs/event-page.c (event_page_fill_widgets): continue filling up all other fields even if there are missing ones, and return the validation result. 2004-03-04 Rodrigo Moya * gui/alarm-notify/alarm-notify-dialog.c (alarm_notify_dialog): don't make the dialog window sticky, the icon on the system tray already shows in all workspaces. 2004-03-04 Rodrigo Moya Fixes #54028 * gui/alarm-notify/alarm-queue.c (query_objects_changed_cb): fixed the time range for the alarm query, to include the end of today. 2004-03-04 Rodrigo Moya Fixes #53137 * gui/dialogs/comp-editor-page.[ch]: made fill_widgets virtual method return a gboolean. (comp_editor_page_fill_widgets): return value from virtual method implementation. * gui/dialogs/event-page.c (event_page_fill_widgets): * gui/dialogs/meeting-page.c (meeting_page_fill_widgets): * gui/dialogs/recurrence-page.c (recurrence_page_fill_widgets): * gui/dialogs/schedule-page.c (schedule_page_fill_widgets): * gui/dialogs/task-details-page.c (task_details_page_fill_widgets): * gui/dialogs/task-page.c (task_page_fill_widgets): * gui/dialogs/alarm-page.c (alarm_page_fill_widgets): return value, as expected from the virtual method signature. * gui/dialogs/comp-editor.c (comp_editor_append_page): dont add the page if there was an error calling the fill_widgets method. 2004-03-03 Rodrigo Moya * gui/e-cal-model.c (e_cal_model_add_client): prevent from adding the same client more than once. 2004-03-02 Rodrigo Moya * gui/cal-search-bar.c: added support for searching the location field also. (regen_query): take into account the new search field. 2004-03-02 JP Rosevear * gui/Makefile.am: remove conduit dir creation 2004-03-02 Larry Ewing * gui/calendar-component.c: add untested start of dnd support for source selector. 2004-03-01 Dan Winship * gui/alarm-notify/alarm-notify.c: fix rampant double-freeing. 2004-03-01 Rodrigo Moya * gui/itip-utils.c (comp_server_send): pass the user list and returned icalcomponent to e_cal_send_objects(). 2004-03-01 Kidd Wang * gui/print.c: (print_date_label): ignore the timezone info of all-day events. 2004-02-27 JP Rosevear * gui/gnome-cal.h: remove proto * gui/gnome-cal.c (set_query): rename from gnome_calendar_set_query and make static * gui/e-day-view.h: remove proto for dead function * gui/e-day-view.c: guard config.h include 2004-02-26 Rodney Dawes * gui/e-meeting-time-sel.c (e_meeting_time_selector_construct): Create the arrows in these widgets as GTK_SHADOW_NONE, since the default arrow type in GTK+ 2.x is flat triangle arrows, and shadow types are generally ignored for arrows anyway, and so we don't look ugly with themes that handle shadow types on arrows correctly 2004-02-26 Rodney Dawes * gui/alarm-notify/GNOME_Evolution_Calendar_AlarmNotify.server.in.in: Fix the repo_id to include the evolution base version 2004-02-26 JP Rosevear * gui/gnome-cal.c (client_cal_opened_cb): make sure we unref the task pad client and the calendar clients are unreffed by the hash table 2004-02-24 JP Rosevear * gui/migration.c (migrate_calendars): fix float type pane position keys (we migrated these improperly in the past), just use the default value Fixes #53087 2004-02-18 Rodrigo Moya * gui/alarm-notify/alarm-notify.c (free_client_hash): remove the client from the queue also. * gui/gnome-cal.c (client_cal_opened_cb): set the task pad client to NULL if opening it failed. Show more verbose status bar messages. 2004-02-18 Rodrigo Moya * common/authentication.c (auth_func_cb): call first e_passwords_get_password before calling _ask_password. * gui/alarm-notify/alarm-queue.c (query_objects_changed_cb): add 1 second to the last notification time, or we'll get many times the same notification. 2004-02-18 Kidd Wang * gui/e-cal-view.c: (e_calendar_view_add_event), (clipboard_get_text_cb): make copy & paste and drag & drop behave the same way described as follows: In day view and work week view from main canvas to top canvas before copy or drag: short event after paste or drop: all-day event from main canvas to main canvas before copy or drag: short event after paste or drop: short event from top canvas to top canvas before copy or drag: all-day event after paste or drop: all-day event before copy or drag: long event after paste or drop: long event from top canvas to main canvas before copy or drag: all-day event after paste or drop: short event before copy or drag: long event after paste or drop: short event In week view, month view and list view life is pretty simple since there's no top canvas in these three views. We just get what we copy or drag after we perform paste or drop. 2004-02-18 Kidd Wang * gui/itip-utils.c: (itip_send_comp): set the string length properly. 2004-02-16 Rodrigo Moya * gui/alarm-notify/alarm-queue.c (tray_icon_clicked_cb): removed buggy characters from menu items' texts. 2004-02-16 Rodrigo Moya * gui/alarm-notify/alarm-notify.c (alarm_notify_add_calendar): open the calendars asynchonously. (cal_opened_cb): callback for "cal_opened" signal. Add the calendars to the alarm queue here. * gui/alarm-notify/alarm-queue.c (query_objects_changed_cb): get alarms since the last notification, only use current time when there is no previous notification time. * gui/alarm-notify/notify-main.c (init_session): set session restart style to RESTART_IF_RUNNING. 2004-02-16 Rodrigo Moya * gui/alarm-notify/notify-main.c: no need to keep the master client. (init_session): just set the daemon's restart style, not the restart command. Connect to "save_yourself" signal on the session also. (save_session_cb): set the restart command here. 2004-02-12 Hans Petter Jansson * gui/dialogs/copy-source-dialog.c (copy_source_dialog): Instead of saying "Select destination source", we now say "... calendar" or "... task list", based on object type. 2004-02-12 Chris Toshok * gui/migration.c (CONTACTS_BASE_URI): rename from CONTACT_BASE_URI, and change to contacts:// to match e-d-s. (create_calendar_contact_source): CONTACT -> CONTACTS. (create_calendar_sources): same. 2004-02-13 Bruce Tao See #51567 * gui/dialogs/delete-comp.c (delete_component_dialog): use "gtk_dialog_add_buttons" to change the response_id of button "YES" and "NO". 2004-02-11 Rodrigo Moya Fixes #53886 * gui/gnome-cal.c (gnome_calendar_paste_clipboard, gnome_calendar_delete_selection, gnome_calendar_cut_clipboard, gnome_calendar_copy_clipboard): removed g_assert_if_reached calls since we might get a different widget getting the focus. (get_focus_location): check the canvas's' focused item. 2004-02-11 Rodrigo Moya Fixes #53271 * gui/calendar-component.c (delete_calendar_cb): remove the source from the GnomeCalendar widget also. * gui/tasks-component.c (delete_task_list_cb): ditto. 2004-02-11 Kidd Wang * gui/print.c: (print_date_label): guarantee we do have some timezone before the time convertion. 2004-02-10 JP Rosevear * importers/icalendar-importer.c: remove useless include * importers/Makefile.am: remove executable build cruft 2004-02-09 Rodrigo Moya * gui/gnome-cal.c (client_cal_opened_cb): don't add the clients to the internal hash/list here, just remove it if opening the calendar fails. (gnome_calendar_add_event_source): add the client to the internal hash/list here. 2004-02-09 Kidd Wang * gui/e-cal-model-tasks.c: (ecmt_set_value_at): refuse to update the task info if due date is before start date. 2004-02-05 JP Rosevear * Convert the calendar_config_get_timezone and icaltimezone_get_builtin_timezone pair to just calendar_config_get_icaltimezone, this also guarantees we will have some timezone (even if its just UTC) Fixes #53754 2004-02-05 JP Rosevear * gui/calendar-config.h: add proto * gui/calendar-config.c (calendar_config_get_icaltimezone): return the icaltimezone based on the location and default to utc if we can't find one (calendar_config_get_hide_completed_tasks_sexp): use above 2004-02-05 JP Rosevear * gui/dialogs/cal-prefs-dialog.c (set_color_picker): make failure not so draconian - make the color black Fixes #53547 2004-02-05 Kidd Wang * gui/goto-dialog.glade: add a mnemonic for the 'Go to Today' button in the 'Go To Date' dialog. 2004-02-05 Sarfraaz Ahmed Fixes #53388 * gui/e-itip-control.c (get_next): added a check for NULL 2004-02-04 JP Rosevear * importers/icalendar-importer.c (gnome_calendar_import_data_fn): use new cal auth functions * common/authentication.c (auth_new_cal_from_default): get a default calendar with auth * common/authentication.h: add proto 2004-02-04 JP Rosevear * importers/icalendar-importer.c (importer_destroy_cb): we only have a single client to free (prepare_events): make the vtodo list optional (button_toggled_cb): handle the type of thing to import switching (primary_selection_changed_cb): handle the selected item switching (create_control_fn): create a control with types (events, tasks) and corresponding source selectors (process_item_fn): only import one type of item at a time (load_file_fn): load the ecal as dictated by the source and type (vcal_importer_new): pass in control function (gnome_calendar_import_data_fn): get the default calendars * importers/Makefile.am (importersdir): add lib 2004-02-04 Rodrigo Moya Fixes #52970 * idl/evolution-calendar.idl: added back the AlarmNotify interface. * gui/alarm-notify/GNOME_Evolution_Calendar_AlarmNotify.server.in.in: changed to have the AlarmNotify component be created via a factory. * gui/alarm-notify/alarm-notify.[ch]: converted to implement the AlarmNotify interface. * gui/alarm-notify/notify-main.c (main): register the factory with bonobo_generic_factory_new, not the object itself. Removed redundant call to bonobo_object_unref. Call e_passwords_shutdown on exit. * gui/alarm-notify/config-data.c (config_data_get_calendars_to_load): get only the selected calendars/task lists. 2004-02-04 Rodrigo Moya * gui/gnome-cal.c (gnome_calendar_add_event_source): don't update the date navigator query nor the internal lists here... (client_cal_opened_cb): do it here. 2004-02-04 Rodrigo Moya * gui/main.c (launch_alarm_daemon_cb): display the exception message on error. * gui/gnome-cal.c (open_ecal): open calendars asynchronously. (client_cal_opened_cb): on success, add the clients to the models here. (gnome_calendar_add_event_source, gnome_calendar_construct): not here. 2004-02-04 Kidd Wang * gui/dialogs/alarm-page.glade: change the access key for adding a reminder from Alt+a to Alt+d to avoid conflict with the menuitem. 2004-02-04 Yong Sun * gui/print.c: Fix a bug in evolution/calendar/gui/print.c: bound_text(). It does not break lines with the correct boundary of UTF-8 characters. So, for non-latin locales, it will cause printing issues. 2004-02-03 Dan Winship * gui/tasks-component.h: Fix location of e-activity-handler.h #include * gui/Makefile.am (INCLUDES): add widgets/misc for e-activity-handler.h and e-task-bar.h * gui/dialogs/Makefile.am (INCLUDES): Likewise 2004-02-02 JP Rosevear * importers/icalendar-importer.c (support_format_fn): use g_file_get_contents (load_file_fn): ditto (vcal_support_format_fn): ditto (load_vcalendar_file): ditto 2004-01-30 JP Rosevear * remove dead files 2004-01-29 Gary Ekker Fixes #51871 * gui/dialogs/calendar-setup.c (calendar_setup_edit_calendar): add activate handler for name_entry (calendar_setup_edit_task_list): ditto 2004-01-30 JP Rosevear * gui/tasks-component.c (create_new_todo): remove extraneous ; Fixes #53418 2004-01-29 JP Rosevear * gui/migration.c (create_calendar_contact_source): don't set the group to be read only until after the source is added. 2004-01-29 JP Rosevear * gui/migration.c (migrate_ical_folder_to_source): migrate to a specific source (migrate_ical_folder): create a new source based on the new source name/uid (create_calendar_contact_source): use the #define for the base uri (create_calendar_sources): try and find the right sources if they already exist (create_task_sources): ditto (migrate_calendars): make sure the personal source is the system source (migrate_tasks): ditto 2004-01-29 Rodrigo Moya * gui/calendar-view.c (calendar_view_get_type_code): added support for the list view also. 2004-01-28 Rodrigo Moya * gui/gnome-cal.c (update_query): * gui/e-cal-list-view.c (e_cal_list_view_update_query): * gui/e-cal-view.c (e_calendar_view_update_query): stop status bar messages madness. 2004-01-27 JP Rosevear * gui/calendar-component.c (delete_calendar_cb): use e_cal_remove * gui/tasks-component.c (delete_task_list_cb): ditto 2004-01-27 Rodrigo Moya Fixes #53276 * gui/dialogs/copy-source-dialog.c (show_error): new function to create an error message dialog. (copy_source): check if the destination calendar is read only, and if so, don't try to copy components over. Fixed leaks. Call show_error to display meaningful error messages. 2004-01-26 JP Rosevear * gui/migration.c (migrate_ical_folder): add the source to the group so it actually shows up 2004-01-26 JP Rosevear * gui/migration.c (migrate_calendars): get the source name with out using freed memory (migrate_tasks): ditto 2004-01-26 Rodrigo Moya Fixes #53338 * gui/dialogs/calendar-setup.c (dialog_to_source): set the relative URI on the source for remote sources. 2004-01-26 Rodrigo Moya Fixes #52312 * gui/dialogs/calendar-setup.c (create_new_source_with_group): * gui/migration.c (migrate_ical_folder, create_calendar_sources, create_task_sources): set the relative URI for local calendars and task lists to be the source UID. 2004-01-24 Rodrigo Moya * gui/calendar-component.[ch] (calendar_component_peek_source_selector): new function. * gui/tasks-component.[ch] (tasks_component_peek_source_selector): new function. * gui/e-tasks.c (backend_died_cb): * gui/gnome-cal.c (backend_died_cb): don't tell the user to restart Evolution, there is no need now, just unselecting and selecting back the calendar loads it again. Also, remove the crashed client from the list of loaded clients. Also, unselect the source on the source selector. 2004-01-24 JP Rosevear * gui/tasks-component.c (update_primary_selection): use e_source_list_peek_source_any (setup_create_ecal): ditto (create_new_todo): just use the default call directly (update_uris_for_selection): just use e-tasks remove/add todo source directly 2004-01-24 JP Rosevear * gui/e-tasks.c (e_tasks_add_todo_source): don't unref and ref, the hash table does this (e_tasks_remove_todo_source): ditto Fixes #53281 2004-01-24 Rodrigo Moya * gui/e-calendar-table.c (e_calendar_table_init): use the colors from the model as background, not as foreground. * gui/e-cal-model-tasks.c (ecmt_get_color_for_component): return the color assigned to each URI if it's not overdue. 2004-01-24 JP Rosevear * gui/tasks-component.c (delete_task_list_cb): sync the source list after the source removal * gui/calendar-component.c (delete_calendar_cb): ditto Fixes #53271 2004-01-24 JP Rosevear * gui/migration.c (setup_progress_dialog): display a progress dialog (dialog_close): destroy it (dialog_set_folder_name): display the folder being migrated (dialog_set_progress): update the progress (check_for_conflict): make sure we don't name anything the same (get_source_name): create a source name (migrate_ical): migrate the events/tasks from one ecal to another (migrate_ical_folder): migrate a specific folder (migrate_calendars): use above (migrate_tasks): ditto 2004-01-23 Rodney Dawes * gui/e-itip-control.c: Use PUBLISH if no METHOD defined Fixes #45564 2004-01-22 Rodrigo Moya * gui/e-cal-model.c (e_cal_view_objects_removed_cb): don't assert if we can't find the component, just continue with next item in the list. 2004-01-22 JP Rosevear * gui/migration.c (process_old_dir): remove useless e_mkdir_hier call. Fixes #53065 2004-01-22 JP Rosevear * gui/e-tasks.c (e_tasks_setup_view_menus): Remove debugging statement 2004-01-22 JP Rosevear * gui/gnome-cal.c (setup_widgets): use the calendar component config dir (gnome_calendar_setup_view_menus): use the calendar component base dir for the view storage * gui/e-tasks.c (e_tasks_setup_view_menus): use the task component base dir for the view storage Fixes #53133 2004-01-21 Rodrigo Moya * gui/e-tasks.c (e_tasks_add_todo_source): check return value from auth_new_cal_from_source(). Connect to "backend_died" signal on the ECal class. (backend_died_cb): callback for "backend_died" that displays an error message when that happens. * gui/gnome-cal.c (backend_died_cb): use a GtkMessageDialog. 2004-01-21 Rodrigo Moya * gui/e-tasks.[ch] (e_tasks_add_todo_uri, e_tasks_remove_todo_uri, e_tasks_get_default_uri): renamed to _source and made them work with ESource's. * gui/tasks-component.c (update_uri_for_primary_selection, add_uri_for_source, remove_uri_for_source): * gui/tasks-control.c (tasks_control_set_property): updated for changes in e-tasks.[ch]. 2004-01-21 Rodrigo Moya * gui/dialogs/calendar-setup.c (create_new_source_with_group): added 'ECalSourceType' argument to be able to create the ECal correctly. Added a call to e_cal_open with 'only_if_exists' set to FALSE so that the backend creates the calendar. (new_calendar_finish, new_task_list_finish): pass new argument to create_new_source_with_group. 2004-01-21 Rodrigo Moya * gui/tasks-component.c (delete_task_list_cb): call e_cal_remove_calendar to actually remove the task list via the backend. 2004-01-21 Rodrigo Moya Fixes #51705 * gui/calendar-component.c (delete_calendar_cb): call e_cal_remove_calendar to actually remove the calendar via the backend. 2004-01-21 JP Rosevear * gui/dialogs/calendar-setup.c (calendar_setup_new_calendar): just use the convienence function for the default gconf client (fixes leak) (calendar_setup_new_task_list): ditto (new_task_list_finish): we don't support task uri's 2004-01-21 JP Rosevear * gui/dialogs/calendar-setup.c (source_to_dialog): only block widgets that exist 2004-01-19 JP Rosevear * gui/e-cal-model-tasks.c (ensure_task_not_complete): correct property name c/p error Fixes # 52269 2004-01-19 JP Rosevear * gui/tasks-component.c (update_primary_selection): handle the case where we have a bogus uid * gui/calendar-component.c (update_primary_selection): ditto 2004-01-19 Radek Doulik * gui/print.c (print_day_add_event): uncomment and use ECalModelComponent (print_day_details): use e_cal_model_generate_instances (print_day_details_cb): use ECalModelGenerateInstancesData (print_day_long_event): use event color (print_day_event): ditto (print_month_small): use e_cal_model_generate_instances (instance_cb): use ECalModelGenerateInstancesData 2004-01-18 Radek Doulik * gui/print.c (print_border_with_triangles): use rgb color as fillcolor (print_week_day_event): ditto (print_table): set page orientation, it may be changed from last printing (print_comp): ditto * gui/e-cal-model.c (e_cal_model_get_rgb_color_for_component): new helper function, gets component color as rgb double values * gui/print.c (print_week_summary_cb): uncommented and updated for e_cal_model_generate_instances (print_week_summary): use e_cal_model_generate_instances (print_border_with_triangles): pass rgb fillcolor (print_border_rgb): new function to print border with rgb color background * gui/e-cal-model.c (e_cal_model_generate_instances): new function, similar to e_cal_generate_instances. see comments to understand how to use cb_data 2004-01-17 JP Rosevear * gui/e-calendar-table.c (e_calendar_table_delete_selected): don't create the component if there is a multiple selection Fixes #52266 2004-01-17 JP Rosevear * gui/e-cal-view.c (on_print): we are required to pass in the end in-out arg Fixes #52972 2004-01-17 JP Rosevear * gui/print.h: update protos * gui/print.c (print_title): util routine to print a title (print_table): print out an etable * gui/calendar-commands.c (print): handle printing the list view * gui/e-cal-list-view.etspec: draw the grid to mimic tasks * gui/tasks-control.c (tasks_control_print_cmd): use print_table Fixes #51751, #52958 2004-01-16 JP Rosevear * gui/calendar-commands.c (print): handle list view by printing the month 2004-01-16 JP Rosevear * gui/e-itip-control.c (find_server): we actually want to not return on any error as well (like NOT FOUND) 2004-01-16 JP Rosevear * gui/e-comp-editor-registry.h: convert to GObject * gui/e-comp-editor-registry.c (registry_data_free): routine to free the registry data (dispose): destroy the registry data (finalize): finalize it (class_init): setup above (init): create full hash table (e_comp_editor_registry_add): weak ref the editor and strdup the hash table key (editor_destroy_cb): we get the registry data now, just remove it * gui/dialogs/comp-editor.c (close_dialog): disconnect the signal handlers, its a bit of a hack but it is a simple fix 2004-01-16 Radek Doulik * gui/print.c (print_calendar): don't set old orientation, preview needs right orientation even after everything is printed 2004-01-16 Rodrigo Moya Fixes #52920 * gui/dialogs/calendar-setup.glade: match label's text with the button's text. 2004-01-16 Rodrigo Moya * gui/tasks-component.c (impl_dispose): unref the activity handler. 2004-01-16 Rodrigo Moya * gui/tasks-component.[ch] (tasks_component_peek_activity_handler): new function. (impl_createControls): create a task bar also for the tasks component. We can't rely on the calendar component's one. (tasks_component_init): create the private activity handler. * gui/e-calendar-table.c (e_calendar_table_set_status_message): use the tasks component's activity handler. * gui/e-tasks.c (on_url_cb): new callback to display status bar messages when mousing over links. (setup_widgets): connect to "on_url" signal on the HTML widget. 2004-01-15 Rodrigo Moya * gui/dialogs/comp-editor.c: reverted my changes made on Jan 8th. 2004-01-15 Rodrigo Moya * gui/alarm-notify/save.[ch]: removed. * gui/alarm-notify/Makefile.am: removed save.[ch]. * gui/alarm-notify/notify-main.c: removed obsolete headers. * gui/alarm-notify/config-data.[ch] (config_data_set_last_notification_time, config_data_get_last_notification_time, config_data_save_blessed_program, config_data_is_blessed_program): new functions. * gui/alarm-notify/alarm-queue.c: dont use removed functions. (alarm_trigger_cb, procedure_notification_dialog, alarm_queue_init): use config_data_* functions. * gui/alarm-notify/alarm-notify.c: dont use removed functions. 2004-01-15 JP Rosevear * gui/tasks-component.h: update protos * gui/tasks-component.c (impl_finalize): free base dir (impl_upgradeFromVersion): just call migrate_tasks (tasks_component_init): set base dir value (tasks_component_peek_base_directory): accessor (tasks_component_peek_source_list): ditto * gui/migration.c (process_old_dir): look for a source with the name and fallback to creating it (create_calendar_contact_source): create the contacts:// source (create_calendar_sources): use above and create all the necessary sources (create_task_sources): create all the necessary sources (migrate_calendars): do all the migration logic here, upgrade bonobo-conf to gconf (migrate_tasks): ditto * gui/calendar-component.h: update prototypes * gui/calendar-component.c (impl_finalize): free the base directory (impl_upgradeFromVersion): just call migrate_calendars (calendar_component_init): fill in base dir value (calendar_component_peek_base_directory): accessor (calendar_component_peek_source_list): ditto 2004-01-15 Radek Doulik * gui/calendar-component.c (create_new_event): test priv->calendar is not NULL before getting current view * gui/tasks-component.c (primary_source_selection_changed_cb): reset create_ecal * gui/calendar-component.c (impl_requestCreateItem): merge with JP's changes (primary_source_selection_changed_cb): reset create_ecal 2004-01-14 Radek Doulik * gui/e-cal-list-view.c (e_cal_list_view_get_selected_time_range): new implementation, use time range from selected event * gui/e-cal-view.c (e_calendar_view_get_selected_time_range): return gboolean, TRUE if requested time was set, FALSE otherwise (e_calendar_view_new_appointment_full): use current time if time range is unavailable * gui/calendar-component.c (impl_requestCreateItem): use e_calendar_view_new_appointment_full instead of cal_comp_event_new_with_current_time * gui/e-cal-view.c (e_calendar_view_new_appointment_full): new helper function * gui/comp-editor-factory.c (edit_new): use cal_comp_event_new_with_current_time * gui/calendar-component.c (impl_requestCreateItem): use cal_comp_event_new_with_current_time * gui/comp-util.c (cal_comp_event_new_with_current_time): new function, cut'n'pasted from get_default_event (calendar-component.c and comp-editor-factory.c) 2004-01-14 JP Rosevear * gui/tasks-component.c (impl_requestCreateItem): new utility routine to create new tasks (create_new_todo): use above so we don't try to set up the creation ecal unless we are actually creating a new item * gui/calendar-component.c (create_new_event): new utility routine to create new events (impl_requestCreateItem): use above so we don't try to set up the creation ecal unless we are actually creating a new item 2004-01-14 Rodrigo Moya * gui/e-calendar-table.c (e_calendar_table_show_popup_menu): use get_selected_objects() instead of get_selected_comp(). 2004-01-14 Rodrigo Moya * gui/e-cal-model-tasks.c (get_status): removed assertion. 2004-01-14 Rodrigo Moya * common/authentication.c (auth_new_cal_from_source): check return value from e_cal_new(). * gui/gnome-cal.c (gnome_calendar_construct): if there is no default tasks folder, don't create the ECal from it. 2004-01-14 JP Rosevear * gui/tasks-component.c (impl_requestCreateItem): don't try to set up the creation ecal unless we are actually creating a new item 2004-01-13 Rodney Dawes * gui/Makefile.am: Only link in libsoup where we need it 2004-01-13 Rodrigo Moya * gui/calendar-component.c (impl_upgradeFromVersion): free 'base_uri' at the end of the function, or it will leak, and removed duplicated code to create the birthdays backend. 2004-01-12 Gary Ekker * gui/Makefile.am: add e-pub-utils.[ch] for Free/Busy publishing * gui/apps_evolution_calendar.schemas.in.in: add schema for /apps/evo/calendar/free_busy key * gui/calendar-commands.c (publish_freebusy_cmd): change to publish component rather than attach as email * gui/calendar-config-keys.h: add free_busy/urls key definition * gui/calendar-config.[ch] (calendar_config_get_free_busy): new method for retrieving FB gconf key (calendar_config_set_free_busy): new method for saving FB gconf key * gui/e-cal-view.c (on_publish): change to publish component rather than attach as email * gui/itip-utils.[ch] (itip_publish_begin): new method to process e_cal_components and aggregate the data if we are publishing for multiple calendars (itip_publish_comp): new method to publish the ical data to an http server via libsoup (comp_fb_normalize): new static method to ensure rfc 2446 compliant data before publishing icalcomponent_get_uid (fb_sort): new static method to sort FB properties in ascending order * gui/dialogs/Makefile.am: add url-editor-dialog.[ch] and url-editor-dialog.glade for configure FB publishing * gui/dialogs/cal-prefs-dialog.[ch] (cal_prefs_dialog_url_add_clicked): (cal_prefs_dialog_url_edit_clicked):new method for events in FB tab of cal-prefs-dialog (cal_prefs_dialog_url_remove_clicked): ditto (cal_prefs_dialog_url_enable_clicked): ditto (cal_prefs_dialog_url_url_list_change): ditto (cal_prefs_dialog_url_url_list_enable_toggled): ditto (cal_prefs_dialog_url_url_list_double_click): ditto (show_fb_config): new method for updating dialog with FB specific data in gconf (update_fb_config): new method for updating gconf with FB specific data from dialogs (setup_changes): detect changes in url_list gtk_tree_view (get_widgets): include new dialog widgets for FB config (init_widgets): connect signals for new FB config widgets * gui/dialogs/cal-prefs-dialog.glade: add new widgets for FB config * gui/dialogs/url-editor-dialog.[ch]: add files for FB url-editor dialog * gui/dialogs/url-editor-dialog.glade: ditto * gui/e-pub-utils.[ch]: add files with FB publishing utilities * gui/calendar-component.c (init_calendar_publishing): sets up listeners to publish calendar, g_idle_add, and on gconf change (init_calendar_publishing_cb): ditto (conf_changed_callback): ditto (impl_createControls): ditto 2004-01-12 Rodrigo Moya * gui/calendar-component.c (impl_upgradeFromVersion): sync the source list after creating the remote source group. 2004-01-12 JP Rosevear * Revert William McCann's patch of 2003-12-19 until we can get consistent across all of evolution 2004-01-12 Hans Petter Jansson * gui/dialogs/calendar-setup.c (source_to_dialog): Only update dialog widgets if they exist. 2004-01-11 JP Rosevear * gui/tasks-component.c: Fix copyright notice, its copyright Novell not our hackers * gui/tasks-component.h: ditto * gui/calendar-component.c: ditto * gui/calendar-component.h: ditto 2004-01-10 Rodrigo Moya * gui/gnome-cal.c (open_ecal): cast the views to E_CALENDAR_VIEW, not to E_CAL_VIEW. 2004-01-10 Rodrigo Moya * gui/alarm-notify/notify-main.c: added missing headers. * gui/alarm-notify/alarm-notify.c (alarm_notify_remove_calendar): use the correct variable when calling alarm_queue_remove_client(). * gui/calendar-component.c (impl_upgradeFromVersion): removed redundant variable declarations. * gui/migration.c (process_old_dir): * gui/e-timezone-entry.c (e_timezone_entry_mnemonic_activate): * gui/e-date-time-list.c (e_date_time_list_finalize): * gui/e-alarm-list.c (e_alarm_list_finalize): fixed warnings. * gui/e-calendar-table.c: added missing prototypes at the top to avoid warnings. * gui/e-week-view.c (e_week_view_scroll_a_step): * gui/e-day-view.c (e_day_view_event_move): directly return in the default: case. * gui/e-tasks.c (setup_widgets): connect to changes on the model. (model_row_changed_cb): callback to update the HTML detailed view when the currently selected task changes. (client_obj_updated_cb): removed unused function. (set_status_message): changed to accept a variable list of arguments. (e_tasks_add_todo_uri): display status messages and get error message from backend and display it in a dialog. (cal_opened_cb, load_error, method_error, permission_error): removed unused functions. * gui/gnome-cal.c (open_ecal): added a GnomeCalendar argument, and display status messages. (gnome_calendar_construct, gnome_calendar_add_event_source): adapted to changes in open_ecal(). 2004-01-10 Rodrigo Moya * gui/alarm-notify/alarm-queue.c (display_notification): keep all the tray icons we create in a list. (tray_icon_destroyed_cb): remove the tray icon data from the list. (popup_dismiss_cb, popup_dismiss_all_cb): implemented missing popup menu items. 2004-01-09 Hans Petter Jansson * gui/calendar-component.c (new_calendar_cb): calendar_config -> calendar_setup. (edit_calendar_cb): Ditto. (impl_requestCreateItem): Ditto. * gui/tasks-component.c (new_task_list_cb): Use calendar_setup. (edit_task_list_cb): Implement properties callback. (rename_task_list_cb): Remove. (fill_popup_menu_cb): Remove "rename" and add "properties". (impl_requestCreateItem): Use calendar_setup. * gui/dialogs/Makefile.am (libcal_dialogs_la_SOURCES): calendar_config -> calendar_setup. Remove new-task-list.[ch]. (glade_DATA): calendar_config -> calendar_setup. Remove new-task-list.glade. * gui/dialogs/new-task-list.[ch]: Remove. * gui/dialogs/calendar-config.[ch]: Rename to calendar-setup.[ch]. * gui/dialogs/calendar-config.glade: Rename to calendar-setup.glade. 2004-01-09 JP Rosevear * gui/calendar-component.c (impl_upgradeFromVersion): make sure we sync the source list when appropriate * gui/tasks-component.c (impl_upgradeFromVersion): ditto 2004-01-09 ERDI Gergo * gui/calendar-component.c (impl_upgradeFromVersion): Create ESource for anniversaries 2004-01-09 Hans Petter Jansson * gui/calendar-component.c (new_calendar_cb): Call calendar_config_new_calendar(). (rename_calendar_cb): Remove. (edit_calendar_cb): Implement properties callback. (fill_popup_menu_cb): Add "Properties..." item and remove "Rename". * gui/dialogs/Makefile.am (libcal_dialogs_la_SOURCES): Add calendar-config.[ch] and remove new-calendar.[ch]. (glade_DATA): Add calendar-config.glade and remove new-calendar.glade. * gui/dialogs/calendar-config.[ch]: Implement calendar creation and editing. * gui/dialogs/calendar-config.glade: Add GUI for above. 2004-01-09 JP Rosevear * gui/tasks-component.c (impl_upgradeFromVersion): return the corba values * gui/calendar-component.c (impl_upgradeFromVersion): ditto 2004-01-09 Rodrigo Moya * gui/calendar-component.c (impl_upgradeFromVersion): only migrate old calendars if migrating from <= 1.4.x. * gui/tasks-component.c (impl_upgradeFromVersion): ditto for tasks. 2004-01-09 Andrew Wu * gui/e-cal-view.c (e_calendar_view_class_init): add a new signal "event_move" and its key binding. * gui/e-cal-view.h: add a new type "ECalViewMoveDirection". add a new virtual method "event_move" for ECalView. * gui/e-day-view.c (e_day_view_event_move), (e_day_view_change_event_time): Use "Alt + Arrow" to move a selected event through time lines or different days. * gui/e-day-view.h: add a new property "last_edited_comp_string" for EWeekView. * gui/e-week-view.c (e_week_view_class_init), (e_week_view_init), (e_week_view_reshape_events), (e_week_view_event_move), (e_week_view_get_day_offset_of_event), (e_week_view_scroll_a_step), (e_week_view_change_event_time), (e_week_view_do_key_press), (e_week_view_move_selection_day), (e_week_view_get_adjust_days_for_move_up), (e_week_view_get_adjust_days_for_move_down), (e_week_view_get_adjust_days_for_move_left), (e_week_view_get_adjust_days_for_move_right): Use "Alt + Arrow" to move a selected event through different days. * gui/e-week-view.h: add a new property "last_edited_comp_string" for EWeekView. 2004-01-08 Rodrigo Moya * gui/alarm-notify/alarm-queue.c (display_notification): store the ECal's associated ECalView, and connect to its "objects_removed" signal. (notifiy_dialog_cb): disconnect signals from the ECalView, not the ECal. (on_dialog_objs_removed_cb): adapted to respond to "objects_removed" signal on ECalView. Made it destroy the tray bar icon also. (add_popup_menu_item): new function to create the popup items. (tray_icon_clicked_cb): remove connection to obsolete signal, and made it popup a menu on right-click. (popup_open_cb, popup_dismiss_cb, popup_dismiss_all_cb): callbacks for popup menu. * gui/gnome-cal.c (connect_week_view_focus): don't access the widget's private fields if NULL. 2004-01-08 Rodrigo Moya * gui/dialogs/comp-editor.c (save_comp): moved the line that sets priv->updating to FALSE up some lines, to avoid getting callbacks with an incorrect value on it. (obj_modified_cb): check the UIDs of the objects we get passed to see if the one being edited is amongst them. 2004-01-08 Kidd Wang * gui/e-cal-view.h: delete the ECalViewMoveDirection type declaration which was added by mistake yesterday. * ChangeLog: add a missed entry for calender-commands.c. 2004-01-07 Rodrigo Moya * gui/alarm-notify/alarm-queue.c (load_alarms): call e_cal_view_start to actually start the live query. (add_component_alarms): check the 'alarms' parameter before using it. 2004-01-07 Rodrigo Moya * gui/alarm-notify/alarm-queue.c: added an ECalQuery for each loaded client. (load_alarms): use a live query to the calendar instead of calling e_cal_get_alarms_in_range(). (alarm_queue_add_client): set query initially to NULL. (query_objects_changed_cb): renamed and made it manage both "objects_added" and "objects_modified" signals of ECalView. (query_objects_removed_cb): manage the "objects_removed" signal of ECalView. (alarm_queue_remove_client): unref the live query. 2004-01-06 JP Rosevear * gui/gnome-cal.c (gnome_calendar_add_event_source): remove the item from the hash last and don't free its members because the hash table does that for us 2004-01-06 Rodrigo Moya * gui/calendar-component.c (impl_upgradeFromVersion): new method's implementation. (calendar_component_class_init): initialize new epv's member. (calendar_component_init): moved migration code to impl_upgradeFromVersion. (update_uri_for_primary_selection): fixed warning. * gui/tasks-component.c (impl_upgradeFromVersion): new method's implementation. (tasks_component_class_init): initialize new epv's member. (tasks_component_init): moved migration code to impl_upgradeFromVersion. 2004-01-06 JP Rosevear * gui/e-select-names-renderer.c (esnr_editing_done): disconnect the activated signal 2004-01-06 JP Rosevear * gui/dialogs/comp-editor.c (comp_editor_finalize): we don't put any signal handlers on the client or source client now, but we do on the view (real_set_e_cal): no signal handlers on the client (obj_modified_cb): we are guaranteed this is a signal for our component (obj_removed_cb): ditto (listen_for_changes): listen for changes on the object (save_comp): use above since the source_client changed (real_edit_comp): use above since the comp changed 2004-01-06 JP Rosevear * gui/e-select-names-renderer.c (esnr_activated): if we are de-activated, the editing is done (esnr_start_editing): listen for activated signal on the control frame Fixes #52196 2004-01-06 Kidd Wang * gui/e-calendar-table.[ch] (e_calendar_table_open_selected): open a dialog for the selected task. * gui/e-tasks.[ch] (e_tasks_open_task): ditto. * gui/tasks-control.c (tasks_control_sensitize_commands), (tasks_control_open_task_cmd): add a menu item for "Open Task". * gui/calender-commands.c: the event should also be allowed to open even when it's readonly. 2004-01-05 Rodrigo Moya * gui/gnome-cal.c (open_ecal): new function to open ECal's, get any error information and display it to the user, all-in-one. (gnome_calendar_construct, gnome_calendar_add_event_source): use the above function, instead of e_cal_open(). (open_error, method_error, permission_error): removed unneeded functions, we just display the error message returned from the backend. 2004-01-05 Rodrigo Moya * gui/gnome-cal.c (gnome_calendar_construct): no need to connect to the "cal_opened" signal on the task client. Also, added code to add the client to the ECalendarTable's model. (client_cal_opened_cb, update_e_cal_view_timeout): removed unneeded function. 2004-01-05 Rodrigo Moya * gui/gnome-cal.c (gnome_calendar_construct): display the tasks' primary selection in the task list, and actually open the tasks folder. * gui/e-tasks.c (e_tasks_set_default_uri): use the ECalModel to get the client for a given URI. 2004-01-04 Rodrigo Moya * gui/calendar-component.c (add_uri_for_source, remove_uri_for_source): removed redundant functions. (update_uris_for_selection): dont call above functions, use gnome_calendar_* directly. 2003-12-29 Kidd Wang * gui/calendar-commands.c (file_open_event_cb): add a menu item for "open appointment". * gui/e-cal-view.[ch] (e_calendar_view_open_event): add a signal "open_event" and bind it to "ctrl+o". When the signal is delivered, a dialog will be opened to edit the selected event. * gui/e-calendar-table.c (e_calendar_table_on_key_press): press "ctrl-o" to open a dialog. 2003-12-24 JP Rosevear * gui/e-select-names-renderer.c (esnr_start_editing): fix the signal name * gui/dialogs/meeting-page.glade: add Add Attendee button * gui/dialogs/meeting-page.c (get_widgets): extract add button (add_clicked_cb): edit the attendee after we add it (init_widgets): listen for add clicked (meeting_page_construct): the add button is in the glade file now * gui/e-select-names-editable.c (esne_start_editing): activate the control (e_select_names_editable_get_address): handle null dest (e_select_names_editable_get_name): ditto * gui/e-meeting-store.h: add proto * gui/e-meeting-store.c (e_meeting_store_find_attendee_path): create the path to a given attendee * gui/e-meeting-list-view.h: add proto * gui/e-meeting-list-view.c (e_meeting_list_view_edit): start editing the address of a particular 2003-12-22 Rodrigo Moya * gui/gnome-cal.[ch] (gnome_calendar_add_event_source, gnome_calendar_remove_event_source): renamed from *_uri, to work with ESource's rather than with plain URIs. (gnome_calendar_set_default_source): ditto. * gui/control-factory.c (set_prop): * gui/calendar-component.c (add_uri_for_source, remove_uri_for_source, update_uri_for_primary_selection): use sources instead of uris with the GnomeCalendar widget. 2003-12-22 Rodrigo Moya * gui/alarm-notify/save.c (get_saved_notification_time): if the setting is not in the config database, use the current time, to avoid getting hundreds of alarms for past events. 2003-12-22 Rodrigo Moya * common/authentication.[ch]: new files for managing interactive authentication with backends. * common/Makefile.am: build new private library. * gui/alarm-notify/alarm-notify.c (alarm_notify_add_calendar): * gui/dialogs/event-page.c (source_changed_cb): * gui/dialogs/task-page.c (source_changed_cb): * gui/dialogs/copy-source-dialog.c (copy_source): * gui/calendar-component.c (setup_create_ecal): * gui/calendar-offline-handler.c (backend_go_offline, backend_go_online, calendar_offline_handler_init): * gui/comp-editor-factory.c (open_client): * gui/e-itip-control.c (start_calendar_server): * gui/e-tasks.c (e_tasks_add_todo_uri): * gui/gnome-cal.c (gnome_calendar_construct, gnome_calendar_add_event_uri): * gui/tasks-component.c (setup_create_ecal): * importers/icalendar-importer.c (load_file_fn, vcal_load_file_fn, gnome_calendar_import_data_fn): create the ECal's via the auth_new_cal_from* functions in the authentication module. * gui/alarm-notify/Makefile.am: * gui/Makefile.am: * importers/Makefile.am: link new private library. * Makefile.am: added new directory to the build. 2003-12-21 JP Rosevear * gui/e-itip-control.[hc]: rewrite for new ecal api, cache all ecal's by type and minimize loading. Switch to using the source option menu * conduits/todo/todo-conduit.c (start_calendar_server): ditto * conduits/calendar/calendar-conduit.c (start_calendar_server): use ECalSourceType * importers/icalendar-importer.c (load_file_fn): ditto (vcal_load_file_fn): ditto (gnome_calendar_import_data_fn): ditto * gui/dialogs/task-page.c (source_changed_cb): ditto * gui/dialogs/event-page.c (source_changed_cb): ditto * gui/dialogs/copy-source-dialog.h: update proto * gui/dialogs/copy-source-dialog.c (copy_source_dialog): ditto * gui/alarm-notify/alarm-notify.c (alarm_notify_add_calendar): ditto * gui/tasks-component.c (copy_task_list_cb): ditto (setup_create_ecal): ditto * gui/gnome-cal.c (gnome_calendar_construct): ditto (gnome_calendar_add_event_uri): ditto * gui/e-tasks.c (e_tasks_add_todo_uri): ditto * gui/comp-editor-factory.c (open_client): ditto * gui/calendar-offline-handler.c (backend_go_offline): ditto (backend_go_online): ditto (calendar_offline_handler_init): ditto * gui/calendar-component.c (copy_calendar_cb): ditto (setup_create_ecal): ditto * gui/print.c (print_month_small): don't pass type to e_cal_generate_instances (print_day_details): ditto (print_week_summary): ditto * gui/tag-calendar.c (tag_calendar_by_client): ditto 2003-12-19 JP Rosevear * gui/tasks-control.c (tasks_control_sensitize_commands): make sure there is a ui container * gui/calendar-commands.c (calendar_control_sensitize_calendar_commands): ditto * gui/tasks-component.c (impl_createControls): update after the signals are connected so that the ecal's are actually loaded * gui/calendar-component.c: ditto 2003-12-19 William Jon McCann * gui/dialogs/task-page.c (source_changed_cb): * gui/dialogs/send-comp.c (send_component_dialog): * gui/dialogs/save-comp.c (save_component_dialog): * gui/dialogs/recur-comp.c (recur_component_dialog): * gui/dialogs/event-page.c (source_changed_cb): * gui/dialogs/delete-error.c (delete_error_dialog): * gui/dialogs/delete-comp.c (delete_component_dialog): * gui/dialogs/changed-comp.c (changed_component_dialog): * gui/dialogs/cancel-comp.c (cancel_component_dialog): * gui/dialogs/alarm-options.glade: * gui/dialogs/alarm-page.glade: * gui/dialogs/cal-prefs-dialog.glade: * gui/dialogs/e-delegate-dialog.glade: * gui/dialogs/event-page.glade: * gui/dialogs/new-calendar.glade: * gui/dialogs/new-task-list.glade: * gui/dialogs/recurrence-page.glade: * gui/dialogs/task-details-page.glade: * gui/dialogs/task-page.glade: * gui/tasks-control.c (confirm_purge): * gui/tasks-component.c (delete_task_list_cb) (rename_task_list_cb, setup_create_ecal): * gui/goto-dialog.glade: * gui/e-cal-model-tasks.c (show_geo_warning): * gui/comp-editor-factory.c (cal_opened_cb): * gui/calendar-component.c (delete_calendar_cb) (rename_calendar_cb, setup_create_ecal, delete_calendar_cb): * gui/calendar-commands.c (purge_cmd): Remove separators from dialogs. Use frame style recommended by the HIG. 2003-12-18 Rodrigo Moya * gui/tasks-component.c (impl_createControls): * gui/calendar-component.c (impl_createControls): make sure we connect to the "changed" signals after setting the initial selections on the ESourceSelector. Fixes some nasty warnings because of calendar_control_sensitize_calendar_commands being called with no container yet for the control. 2003-12-17 Hans Petter Jansson * gui/dialogs/comp-editor.c: Add the concept of a source client, where the object lives currently. The plain client is where it will be stored. (comp_editor_finalize): If we have a source client, disconnect from and unref it. (save_comp): Check if the object is being moved, and if so, remove it from the source client, and make the target client the new source. (comp_editor_append_page): Connect to client_changed signal. (real_set_e_cal): Change an old gtk_signal_disconnect_by_data() to the GLib equivalent, and don't cast ECal to GtkObject. If the source client is not set, make it equivalent to the target client. (page_client_changed_cb): Implement. Handles a client change. * gui/dialogs/comp-editor-page.c (comp_editor_page_class_init): Add a new signal, "client_changed", that notifies that the ECal client was changed from one of the editor pages. (comp_editor_page_set_e_cal): Fix two bugs in this function; if the same client is set twice, its ref count could drop to 0. Additionally, it was unreffing the new client instead of the old one. (comp_editor_page_notify_client_changed): Implement. * gui/dialogs/event-page.c (event_page_fill_widgets): Fill in the source menu. (get_widgets): Get the source menu. (source_changed_cb): Implement. Try to open a client for the new source, and if successful, notify of the change. Show a dialog on failure, and revert to last selected source. (init_widgets): Connect to source menu. (event_page_create_source_option_menu): Implement Glade helper. * gui/dialogs/task-page.c (task_page_fill_widgets): Fill in the source menu. (get_widgets): Get the source menu. (source_changed_cb): Implement, similar to the event page, but for tasks. (init_widgets): Connect to source menu. (task_page_construct): Fix a message booboo. (task_page_create_source_option_menu): Implement Glade helper. * gui/dialogs/event-page.glade: Add source menu widget. * gui/dialogs/task-page.glade: Add source menu widget. 2003-12-17 Rodrigo Moya * gui/tasks-component.c (add_popup_menu_item): * gui/calendar-component.c (add_popup_menu_item): use g_file_test to check if the 'pixmap' argument is a file. If so, get the pixmap from it, or gtk_image_new_from_stock will return an empty pixmap. 2003-12-17 Rodrigo Moya * gui/gnome-cal.c (client_cal_opened_cb): set a correct status message. * gui/tasks-component.c (fill_popup_menu_cb): * gui/calendar-component.c (fill_popup_menu_cb): use the folder*.png icons for folder operations. * gui/Makefile.am: removed cal-client directory from $INCLUDES. 2003-12-17 Harry Lu Fixes #51665. * gui/e-week-view.c: (e_week_view_focus): call e_week_view_check_layout() so that the spans won't be NULL. 2003-12-17 Rodrigo Moya * gui/calendar-commands.c: removed the 'NewCalendar' verb. (file_new_calendar_cb): removed callback for 'NewCalendar' verb. * gui/calendar-component.c: (impl__get_userCreatableItems): added 'New Calendar' to the list of user creatable items. (impl_requestCreateItem): implemented 'New Calendar'. * gui/tasks-component.c (impl__get_userCreatableItems): added 'New Task List' to the list of user creatable items. (impl_requestCreateItem): implemented 'New Task List'. 2003-12-17 Rodrigo Moya * gui/tasks-control.[ch] (tasks_control_sensitize_commands): made it public. * gui/tasks-component.c (update_uri_for_primary_selection): call tasks_control_sensitize_commands() when the primary selection changes. 2003-12-17 Rodrigo Moya * gui/calendar-component.c (update_uri_for_primary_selection): call calendar_control_sensitize_calendar_commands when the primary selection changes. (impl_createControls): keep the view_control in the private structure and use control_factory_new_control() to create the control. (control_activate_cb): removed unneeded function. * gui/tasks-component.c (impl_createControls): use tasks_control_new to create the tasks view control. (control_activate_cb): removed unneeded function. * gui/gnome-cal.c (gnome_calendar_add_event_uri): check the return value from e_cal_new_from_uri. 2003-12-17 Rodrigo Moya * gui/alarm-notify/alarm-notify.c (alarm_notify_remove_calendar): make sure we free the data stored in the hash table. (alarm_notify_add_calendar): call alarm_queue_add_client, or we wont have alarms at all. * gui/alarm-notify/alarm-queue.c: no need to hold a ref count. (alarm_queue_add_client, alarm_queue_remove_client): don't use the refcount private member. (alarm_queue_add_client): don't connect to non-existing ECal signals. (display_notification, free_client_alarms_cb): fixed warnings. 2003-12-16 Rodrigo Moya Fixes part of #41237 * gui/e-calendar-table.c: use GtkClipboard instead of GtkInvisible for cut/copy/paste. (selection_clear_event, selection_received, selection_get): removed unneeded functions. (e_calendar_table_init): don't create the invisible widget. (e_calendar_table_copy_clipboard): use gtk_clipboard_set_text(). (e_calendar_table_paste_clipboard): use gtk_clipboard_request_text(). (clipboard_get_text_cb): callback for gtk_clipboard_request_text(). * gui/e-cal-view.c (e_calendar_view_init, e_calendar_view_destroy, e_calendar_view_copy_clipboard): no need anymore to keep the last clipboard selection, GtkClipboard does it for us. 2003-12-16 Rodrigo Moya * gui/alarm-notify/notify-main.c (alarm_notify_factory_fn): return a reference to the alarm_notify_service, not NULL and ref the object before returning it. 2003-12-15 JP Rosevear * gui/gnome-cal.c (setup_widgets): set the list view config properly (so we don't blow away the month view config 2003-12-15 JP Rosevear * gui/gnome-cal.c (setup_widgets): set the calendar for the day view 2003-12-14 JP Rosevear * gui/calendar-component.c (impl_requestCreateItem): set a proper exception if we fail 2003-12-14 JP Rosevear * gui/calendar-config.c (calendar_config_get_hide_completed_tasks_units): make sure the string is non-null before strcmp'ing it Fixes #52033 2003-12-10 Rodrigo Moya * gui/gnome-cal.c (gnome_calendar_add_event_uri): remove the client from the list if there are errors, instead of re-adding it again. Also, unref the ECal object on errors, for not leaking. 2003-12-10 Bolian Yin *gui/e-week-view.c: Fix a event/jump button tabbing bug 2003-12-10 Harry Lu Fix for bugzilla bug #51628. * gui/weekday-picker.c: (weekday_picker_class_init): setup focus handler. (day_clicked): new function to set day_mask when mouse clicked or keyboard input of space/enter. (handle_key_press_event): new function to handle key press event. (day_event_cb): handle key press event too. (weekday_picker_init): set widget can be focused. (colorize_items): change the box's outline if it is focused. (weekday_picker_focus): new function to handler focus event. 2003-12-09 Andrew Wu * gui/e-week-view-main-item.c (e_week_view_main_item_class_init): init a11y. * gui/e-week-view.c: emit signal "selected_time_changed". 2003-12-08 Bolian Yin * gui/e-day-view.c (e_day_view_on_editing_started): remove setting property of "handle_popup". * gui/e-week-view.c (e_week_view_on_editing_started): remove setting property of "handle_popup". 2003-12-08 Carl Sun Fixes #46351 * gui/e-timezone-entry.c (e_timezone_entry_mnemonic_activate): new function. override the member function of GtkWidget to handle nemonic_activate signal of custom class ETimezoneEntry. 2003-12-08 Bolian Yin * gui/gnome-cal.c (gnome_calendar_class_init): correct argument mismatch in "goto_date" signal definition. 2003-12-05 Yong Sun Fix for #51337 * gui/dialogs/alarm-page.c Change raw string "Action/Trigger" to _("Action/Trigger") * gui/dialogs/recurrence-page.c Change raw string "Date/Time" to _("Date/Time") 2003-12-04 Harry Lu Fix for bugzilla bug #51627. * gui/goto.c: (create_ecal): set calitem's move_selection_when_moving to FALSE so that changing month and year won't send out a "selection_changed" signal. 2003-12-03 Ettore Perazzoli * gui/tasks-control.c (tasks_control_activate): Do not call control_util_set_folder_bar_label(). * gui/e-calendar-table.c (e_calendar_table_set_status_message): Use e_activity_handler_operation_progressing(), not evolution_activity_client_update(). * gui/e-cal-view.c: Remove settings menu. (on_settings): Remove. * gui/calendar-commands.c (get_shell_view_interface): Remove. (control_util_set_folder_bar_label): Remove. (calendar_set_folder_bar_label): Remove. (control_util_show_settings): Remove. (gcal_calendar_dates_change_cb): Remove. (calendar_control_activate): Do not connect, do not call calendar_set_folder_bar_label(). 2003-12-03 JP Rosevear * gui/gnome-cal.c (gnome_calendar_destroy): free the notification list * gui/tasks-component.c (impl_dispose): ditto * gui/calendar-component.c (impl_dispose): ditto 2003-12-03 JP Rosevear * gui/tasks-component.c (impl_dispose): free up the notifications and the ecal (config_create_ecal_changed_cb): clear the create_ecal if the primary selection changes (setup_create_ecal): find a default ecal to do creation with (impl_requestCreateItem): use above 2003-12-03 JP Rosevear * gui/tasks-component.c (rename_task_list_cb): cast the parent (impl_createControls): add notification for primary tasks (config_primary_selection_changed_cb): handle primary selection changing in gconf * gui/calendar-config-keys.h: fix config key for primary tasks 2003-12-03 JP Rosevear * gui/calendar-component.c (rename_calendar_cb): cast the parent (config_primary_selection_changed_cb): handle the primary selection changing elsewhere (impl_dispose): remove the list of notifications (impl_createControls): add primary calendar notification (config_create_ecal_changed_cb): clear create_ecal if the primary key changes (setup_create_ecal): find an ecal to use for creation (impl_requestCreateItem): use above 2003-12-03 Ettore Perazzoli * importers/icalendar-importer.c: Do not #include shell stuff. * gui/main.c: Do not #include . * gui/e-itip-control.c: Do not #include nor . (start_default_server): Return FALSE. (default_server_started_cb): Do not connect the "selected" signal on the button since it's now NULL. (button_selected_cb): #if 0 out. * gui/e-cal-list-view.h: Do not #include "evolution-activity-client.h". * gui/tasks-component.c (impl_createControls): Give an empty label for the status bar. * gui/e-day-view.h: Remove all deps on evolution-activity-client. 2003-12-02 Rodney Dawes * gui/Makefile.am: Version the schemas * gui/apps_evolution_calendar.schemas: Removed * gui/apps_evolution_calendar.schemas.in.in: Added 2003-12-02 Rodrigo Moya * gui/dialogs/copy-source-dialog.c (copy_source_dialog): added a label to the dialog to make it look less ugly. 2003-12-02 Rodrigo Moya * gui/dialogs/copy-source-dialog.c: converted to use an ESourceOptionMenu instead of the ESourceSelector. (primary_selection_changed_cb): removed. (copy_source_dialog): create the ESourceOptionMenu here. (source_selected_cb): callback for the "source_selected" signal on the ESourceOptionMenu widget. 2003-12-02 Ettore Perazzoli * gui/e-calendar-table.h (struct _ECalendarTable): Replace member "activity" with an "activity_id". * gui/e-cal-view.c (struct _ECalendarViewPrivate): Replace member "activity" with "activity_id". (e_calendar_view_destroy): Don't unref activity here anymore. (e_calendar_view_set_status_message): Report progress using the EActivityHandler off the CalendarComponent. * gui/calendar-component.c (struct _CalendarComponentPrivate): New member activity_handler. (calendar_component_init): Init. (calendar_component_peek_activity_handler): New. (impl_dispose): Unref. (impl_createControls): Return an ETaskBar for the statusbar control. 2003-12-01 Ettore Perazzoli * gui/calendar-component.c (impl_createControls): Pass a label for the status bar control for now. * gui/tasks-component.c (impl_createControls): Pass a label for the status bar control for now. 2003-12-01 Rodney Dawes * gui/GNOME_Evolution_Calendar.server.in.in: * gui/calendar-commands.c: * gui/e-meeting-list-view.c: * gui/e-meeting-model.c: * gui/e-select-names-editable.c: * gui/itip-bonobo-control.c: * gui/itip-utils.c: * gui/main.c: * gui/alarm-notify/GNOME_Evolution_Calendar_AlarmNotify.server.in.in: * gui/alarm-notify/alarm-queue.c: * gui/alarm-notify/notify-main.c: * gui/dialogs/alarm-options.c: * gui/dialogs/e-delegate-dialog.c: * importers/GNOME_Evolution_Calendar_Importer.server.in.in: * importers/main.c: Use BASE_VERSION for repo_ids and OAFIIDs 2003-12-01 JP Rosevear * conduits/todo/Makefile.am: put the conduits in their own dir * conduits/calendar/Makefile.am: ditto * conduits/todo/e-todo.conduit.in: subst in correct thing * conduits/calendar/e-calendar.conduit.in: ditto 2003-12-01 JP Rosevear * conduits/todo/Makefile.am: install to privlibdir * conduits/calendar/Makefile.am: ditto * conduits/todo/e-todo.conduit.in: subst in correct thing * conduits/calendar/e-calendar.conduit.in: subst in correct thing 2003-12-01 Rodrigo Moya * gui/alarm-notify/alarm-notify.c (add_uri_to_load, remove_uri_to_load): removed unneeded functions. (alarm_notify_add_calendar, alarm_notify_remove_calendar): no need anymore to add/remove URIs to load on startup to the configuration. 2003-12-01 Rodrigo Moya * gui/alarm-notify/save.c (save_calendars_to_load): removed this function, since we now use the ESourceList to know what calendars to load. (get_calendars_to_load): moved to config-data.c. (save_notification_time, get_saved_notification_time, save_blessed_program, is_blessed_program): use the shared GConfClient. * gui/alarm-notify/config-data.[ch]: use a GConfClient instead of a EConfigListener. (config_data_get_conf_client): renamed from _get_listener. (config_data_get_timezone, config_data_get_24_hour_format): changed to use the GConfClient. (config_data_get_calendars_to_load): new function. (ensure_inited): create the source lists for calendar and tasks here. (do_cleanup): cleanup the source lists here. * gui/alarm-notify/notify-main.c (load_calendars): use config_data_get_calendars_to_load(). 2003-11-28 JP Rosevear * gui/e-tasks.c (e_tasks_delete_completed): we want to skip if it *is* read only 2003-11-28 JP Rosevear * gui/e-meeting-store.c (e_meeting_store_get_type): allocate the type information correctly 2003-11-26 Hans Petter Jansson * gui/calendar-offline-handler.c (backend_go_offline): e_cal_new () -> e_cal_new_from_uri (). (backend_go_online): Ditto. (calendar_offline_handler_init): Ditto. * gui/comp-editor-factory.c (open_client): Ditto. * gui/e-itip-control.c (start_calendar_server): Ditto. (object_requested_cb): Ditto. * gui/e-tasks.c (e_tasks_add_todo_uri): Ditto. * gui/gnome-cal.c (gnome_calendar_construct): Ditto. (gnome_calendar_add_event_uri): Ditto. * gui/alarm-notify/alarm-notify.c (alarm_notify_add_calendar): Ditto. * importers/icalendar-importer.c (load_file_fn): Ditto. (vcal_load_file_fn): Ditto. (gnome_calendar_import_data_fn): Ditto. * gui/dialogs/copy-source-dialog.c (copy_source): Pass sources to e_cal_new (). 2003-11-24 Rodrigo Moya * gui/dialogs/copy-source-dialog.c (copy_source): use the correct icalcomponent when calling e_cal_create_object. * gui/tasks-control.c (sensitize_commands): no need to have a selection for Paste to work. * gui/e-calendar-table.c (e_calendar_table_show_popup_menu): disable editing items if the selected task list is read only, not if it's not. 2003-11-24 Rodrigo Moya * gui/dialogs/new-task-list.glade: * gui/dialogs/new-task-list.[ch]: new files containing the implementation of the 'New Task List' dialog. * gui/dialogs/Makefile.am: added new files. * gui/dialogs/new-calendar.c (new_calendar_dialog): use G_STRLOC for g_warning messages. * gui/tasks-component.c (new_task_list_cb): implemented. 2003-11-24 Rodrigo Moya * gui/dialogs/copy-source-dialog.c (copy_source_dialog): actually add the source selector to the dialog's box. 2003-11-23 Rodrigo Moya * gui/tasks-component.c: * gui/dialogs/copy-source-dialog.[ch]: fixed compilation errors. * gui/dialogs/Makefile.am: added missing header directories. 2003-11-23 Rodrigo Moya * gui/dialogs/new-calendar.[ch]: fixed copyright notices. * gui/dialogs/copy-source-dialog.[ch]: implementation of the Copy command for sources. * gui/dialogs/Makefile.am: added new files. * gui/calendar-component.c (fill_popup_menu_cb, copy_calendar_cb): added Copy command. * gui/tasks-component.c (fill_popup_menu_cb, copy_task_list_cb): added Copy command. 2003-11-23 Ross Burton * gui/alarm-notify/GNOME_Evolution_Calendar_AlarmNotify.server.in.in: Append "_2" to the OAFIID to avoid conflicting with Evo 1.4. * gui/main.c: * gui/alarm-notify/notify-main.c: Updated with new OAFIID. 2003-11-20 JP Rosevear * Remove a bunch of gal includes that are no longer needed 2003-11-19 Rodrigo Moya Fixes #43556 * gui/e-cal-view.c (selection_get, selection_clear_event, selection_received): removed this unneeded functions. (e_calendar_view_init): don't create a GtkInvisible anymore. (e_calendar_view_destroy): no need to destroy the GtkInvisible. (e_cal_view_copy_clipboard, e_cal_view_paste_clipboard): use GtkClipboard. 2003-11-19 JP Rosevear * gui/e-cal-model-tasks.c (get_due): make sure timezone value is sane (get_completed): ditto * gui/e-cal-model.c (get_dtstart): add more guards * gui/e-cal-model-calendar.c (get_dtend): ditto 2003-11-19 Rodrigo Moya Fixes #51052 * importers/icalendar-importer.c (prepare_events, prepare_tasks): call icalcompiter_next to move the pointer to the next before removing a component avoid breaking the link. 2003-11-18 JP Rosevear * gui/e-cal-model.c (get_dtstart): make sure the timezone value is sane * gui/e-cal-model-calendar.c (get_dtend): ditto 2003-11-18 JP Rosevear * gui/calendar-config.h: add protos * gui/calendar-config.c (calendar_config_get_primary_calendar): get the primary calendar (calendar_config_set_primary_calendar): set it (calendar_config_add_notification_primary_calendar): set notifications for it (calendar_config_get_primary_tasks): get the primary task list (calendar_config_set_primary_tasks): set it (calendar_config_add_notification_primary_tasks): set notifications for it * gui/calendar-config-keys.h: add primary keys * gui/calendar-component.c (find_first_source): find any source (update_uri_for_primary_selection): set the default uri and save the source uid (update_primary_selection): set the primary selection (primary_source_selection_changed_cb): use above (impl_createControls): set the primary selection * gui/tasks-component.c: as above 2003-11-18 JP Rosevear * gui/Makefile.am: remove db3 include 2003-11-18 Rodrigo Moya * gui/calendar-commands.c (calendar_control_sensitize_calendar_commands, sensitize_taskpad_commands): removed the 'New...' menu items from the UI, it's now implemented in the shell. (file_new_appointment_cb, file_new_event_cb, file_new_meeting_cb, file_new_task_cb): removed. 2003-11-18 Rodrigo Moya * gui/calendar-component.c (add_popup_menu_item): added 'sensitive' argument. (fill_popup_menu_cb): disable/enable menu items depending on whether there is a selection or not. * gui/tasks-component.c (add_popup_menu_item, fill_popup_menu_cb): ditto. 2003-11-17 JP Rosevear * Cleanup some ref/unref calls 2003-11-17 Rodrigo Moya * gui/calendar-component.c (delete_calendar_cb, rename_calendar_cb): * gui/tasks-component.c (delete_task_list_cb, rename_task_list_cb): peek the primary selection. 2003-11-17 Rodrigo Moya * gui/tasks-component.c (fill_popup_menu_cb): added 'Delete' and 'Rename' menu items. (delete_task_list_cb, rename_task_list_cb): callbacks for new menu items. 2003-11-17 Rodrigo Moya * gui/calendar-component.c (add_popup_menu_item): try first to create the icon from the stock, and then from a file. (fill_popup_menu_cb): set callback for 'Rename' menu item. (rename_calendar_cb): callback for 'Rename' menu item. (new_calendar_cb): fixed arguments. * gui/tasks-component.c (impl_createControls): connect to "fill_popup_menu" signal on the source selector. (fill_popup_menu_cb): callback to create our menu items. 2003-11-17 Rodrigo Moya * idl/evolution-calendar.idl: remove the AlarmNotify service, no more need for it, since the alarm daemon will listen for changes on the GConf key. * gui/gnome-cal.c (add_alarms): removed function to talk to the alarm daemon. (client_cal_opened_cb): don't call add_alarms(). * gui/alarm-notify/alarm-notify.[ch]: made it a basic GObject. (AlarmNotify_addCalendar, AlarmNotify_removeCalendar): removed AlarmNotify interface implementation. (alarm_notify_class_init): no epv to initialize. (alarm_notify_remove_calendar): new function, copied from the CORBA method implementation. (alarm_notify_factory_fn): return NULL, since there is no objects that can be created via this factory now. * gui/alarm-notify/notify-main.c (main): now the factory is the alarm notification service itself. (load_calendars): no need to use exceptions here. * gui/alarm-notify/GNOME_Evolution_Calendar_AlarmNotify.server.in.in: now the factory is the alarm notification service itself. * gui/main.c (launch_alarm_daemon_cb): dont use the AlarmNotify CORBA types. 2003-11-17 Harry Lu * gui/dialogs/recurrence-page.c (make_ending_count_special): Make ending count of occurrences of Recurrence tab numeric only. 2003-11-16 JP Rosevear * gui/tasks-control.c (tasks_control_set_property): add a uri * gui/e-tasks.c: kill e_tasks_open * gui/e-tasks.h: remove proto 2003-11-16 JP Rosevear * gui/e-cal-model.c (e_cal_view_objects_added_cb): emit the added signal for the correct rows 2003-11-16 JP Rosevear * gui/tasks-component.c (is_in_uids): copy in here (update_uris_for_selection): save the selection (update_selection): update the selection when its changed somewhere else (config_selection_changed_cb): update the selection if the configuration changes (impl_createControls): store the source selector * gui/calendar-config.h: add protos * gui/calendar-config.c (calendar_config_get_tasks_selected): get the list of task lists selected (calendar_config_set_tasks_selected): save it (calendar_config_add_notification_tasks_selected): get notified about it 2003-11-16 JP Rosevear * gui/tasks-component.c (add_uri_for_source): add it via e-tasks (remove_uri_for_source): remove it via e-tasks (get_default_task): provide a default for editing (impl_createControls): create the control directly (impl_requestCreateItem): implement * gui/gnome-cal.c (gnome_calendar_purge): don't let the two list iterators clobber each other * gui/e-tasks.h: add protos * gui/e-tasks.c (e_tasks_destroy): free the client list and the hash, disconnect signals (e_tasks_new_task): use the default client (e_tasks_add_todo_uri): add a uri (e_tasks_remove_todo_uri): remove a uri (e_tasks_set_default_uri): set default uri (e_tasks_get_default_client): get default client (e_tasks_delete_completed): expunge from all clients (e_tasks_setup_view_menus): use default client uri * gui/e-tasks.c (set_timezone): set the timezone for all clients (e_tasks_init): set up the clients has table * gui/e-calendar-table.etspec: yank some useless display columns * gui/e-cal-model.c (remove_client): remove objects in reverse order so we don't clobber ourselves * gui/calendar-component.c: add FIXME 2003-11-16 JP Rosevear * gui/calendar-component.c (get_default_event): set up a event to be edited (impl_requestCreateItem): implement 2003-11-14 JP Rosevear * gui/*.[hc]: include e-source* from e-d-s 2003-11-14 JP Rosevear * gui/calendar-config.c (calendar_config_get_calendars_selected): config accessor (calendar_config_set_calendars_selected): ditto (calendar_config_add_notification_calendars_selected): config notification * gui/calendar-config.h: add protos * gui/calendar-config-keys.h: add new key * gui/calendar-component.c (is_in_uids): util function (update_uris_for_selection): save the selection in the configuration (update_selection): update the selection from the config info (source_selection_changed_cb): only pass one param (config_selection_changed_cb): listen for config changes (impl_dispose): remove config notification (impl_createControls): use bonobo_exception_set; add a config notification 2003-11-13 Ettore Perazzoli * gui/tasks-component.c (impl__get_userCreatableItems): New. (impl_requestCreateItem): New. (tasks_component_class_init): Install. * gui/calendar-component.c (impl__get_userCreatableItems): New. (impl_requestCreateItem): New, for now just a stub. (calendar_component_class_init): Install into the EPV. 2003-11-13 Ettore Perazzoli * gui/GNOME_Evolution_Calendar.server.in.in: Add a component_alias of "calendar" for the calendar and "tasks" for the tasks. 2003-11-12 Hans Petter Jansson * gui/calendar-component.c (add_popup_menu_item): Use non-deprecated gtk_menu_shell_append (). 2003-11-11 Bolian Yin Fixes #50808 * gui/goto.c (goto_dialog): set initial selection to current day. 2003-11-11 JP Rosevear * gui/calendar-offline-handler.c (backend_cal_opened_offline): use a standard calendar status (backend_cal_opened_online): ditto * gui/alarm-notify/alarm-queue.c (cal_opened_cb): ditto * gui/gnome-cal.c (client_cal_opened_cb): ditto * gui/e-tasks.c (cal_opened_cb): ditto * gui/e-itip-control.c (default_server_started_cb): ditto * gui/e-cal-model.c (cal_opened_cb): ditto * gui/comp-editor-factory.c (cal_opened_cb): ditto 2003-11-11 JP Rosevear * conduits/todo/todo-conduit.c (start_calendar_server): load the calendar synchronously * conduits/calendar/calendar-conduit.c (start_calendar_server): ditto 2003-11-10 JP Rosevear * importers/icalendar-importer.c (update_single_object): return boolean not ECalStatus (update_objects): ditto (process_item_fn): handle above returns 2003-11-10 JP Rosevear * gui/e-cal-model-tasks.c (get_due_status): just check the boolean 2003-11-10 JP Rosevear * conduits/calendar/calendar-conduit.c (e_calendar_context_destroy): use proper change list free function name (post_sync): ditto * conduits/todo/todo-conduit.c: same 2003-11-10 Dan Winship * gui/e-tasks.c (e_tasks_delete_completed): Remove get-vtype check from the completed-tasks query (and don't leak the sexp string). * gui/e-cal-model.c (update_e_cal_view_for_client): Don't adjust the sexp to use get-vtype. * gui/gnome-cal.c (adjust_e_cal_view_sexp, gnome_calendar_purge): Remove get-vtype check from queries 2003-11-07 JP Rosevear * gui/Makefile.am: remove includes for toplevel libical dir * gui/dialogs/Makefile.am: ditto * importers/Makefile.am: ditto 2003-11-07 JP Rosevear * In the gui this is a search and replace commit for moving the calendar to evolution-data-server; it also deletes the old backend files; e-cal-view was rename to e-calendar-view to remove name conflict 2003-11-05 JP Rosevear * gui/migration.c: fix typo 2003-11-05 Larry Ewing * gui/migration.c (process_old_dir): add a unimplemented warning so we at least avoid relocation errors. 2003-11-04 Rodrigo Moya * gui/calendar-component.c (fill_popup_menu_callback): added more menu items. (delete_calendar_cb): callbacks for new popup menu items. (impl_createControls): add the source selector widget to the CalendarComponentPrivate structure. * gui/migration.[ch] (migrate_old_tasks): new function to migrate old tasks setups. (process_old_dir): renamed and added a "filename" argument, so that the same function can be used for tasks and calendar directories. (migrate_old_calendars): added new argument when calling process_old_dir(). * gui/tasks-component.c (tasks_component_init): call migrate_old_tasks() if there are no groups defined. 2003-11-04 Bolian Yin * gui/e-cal-view.c: add new signal "selected_time_changed" * gui/e-day-view-main-item.c (e_day_view_main_item_class_init): a11y initialization * gui/e-day-view-top-item (e_day_view_top_item_get_day_label): new public function. * gui/e-day-view.c (e_day_view_ensure_rows_visible, e_day_view_update_calendar_selection_time): make static functions public (e_day_view_cursor_key_up, e_day_view_cursor_key_down, e_day_view_cursor_key_left, e_day_view_cursor_key_right): emit "selected_time_changed". 2003-11-03 Ettore Perazzoli * gui/e-meeting-model.c (SELECT_NAMES_OAFID): Append "_2". * gui/e-select-names-editable.c (SELECT_NAMES_OAFIID): Likewise. * gui/e-meeting-list-view.c (SELECT_NAMES_OAFID): Likewise. * gui/dialogs/alarm-options.c (SELECT_NAMES_OAFID): Likewise. * gui/dialogs/e-delegate-dialog.c (SELECT_NAMES_OAFID): Likewise 2003-11-03 Ettore Perazzoli * gui/GNOME_Evolution_Calendar.server.in.in: use "evolution2:config_item" properties instead of "evolution:config_item" ones. 2003-11-03 Harry Lu Fix for #50387. * importers/icalendar-importer.c (support_format_fn): Call icalcomponent_is_valid() to check whether the returned icalcomponent is valid. 2003-10-31 Hans Petter Jansson * gui/calendar-component.c (calendar_component_init): Add the webcal source group. * gui/dialogs/new-calendar.c (print_uri_noproto): Implement. (group_is_remote): Implement. (create_new_source_with_group): Implement webcal case. (new_calendar_dialog): Get optional location from dialog. * gui/dialogs/new-calendar.glade: Add location entry. * pcs/Makefile.am: Build http backend. * pcs/cal-backend-http.[ch]: Add skeleton based on cal-backend-file. 2003-10-31 Dan Winship * cal-util/cal-util.h: Add CAL_STATIC_CAPABILITY_NO_THISANDFUTURE and CAL_STATIC_CAPABILITY_NO_THISANDPRIOR * gui/dialogs/recur-comp.c (recur_component_dialog): Add a CalClient argument. Use cal_client_get_static_capability to decide whether or not to offer THISANDFUTURE and THISANDPRIOR options * gui/dialogs/comp-editor.c (prompt_to_save_changes, save_cmd, save_close_cmd): Pass a CalClient to recur_component_dialog. * gui/e-day-view.c (e_day_view_finish_long_event_resize, e_day_view_finish_resize, e_day_view_on_editing_stopped, e_day_view_on_top_canvas_drag_data_received, e_day_view_on_main_canvas_drag_data_received): Likewise * gui/e-week-view.c (e_week_view_on_editing_stopped): Likewise * gui/calendar-component.c (impl_createControls): set an exception if we fail, so evo won't crash. 2003-10-31 Rodrigo Moya * gui/e-calendar-table.c (e_calendar_table_show_popup_menu): fixed mismatched condition in if/else statement. 2003-10-30 Rodrigo Moya * gui/e-tasks.[ch] (e_tasks_get_cal_client): removed. * gui/tasks-control.c (sensitize_commands): fixed to work correctly with the ECalView's model. (tasks_control_set_property): don't use e_tasks_get_cal_client. * gui/alarm-notify/alarm-notify.c (free_client_hash): new function to remove items from the CalClient's hash table. (alarm_notify_finalize): call free_client_hash() for each item in the hash table. 2003-10-30 Rodrigo Moya * gui/alarm-notify/notify-main.c (client_die_cb): use bonobo_main_quit, not gtk_main_quit. * gui/alarm-notify/alarm-queue.c (free_client_alarms_cb): callback for freeing ClientAlarms stored in the hash table. (alarm_queue_done): call free_client_alarms_cb() for each opened client. 2003-10-30 Rodrigo Moya * pcs/cal-backend-file.c (mark_dirty, save_idle): removed, since we dont save the file anymore in idle callbacks. (cal_backend_file_dispose): removed all traces of the idle saving. (check_dup_uid, create_cal, cal_backend_file_add_timezone, cal_backend_file_create_object, cal_backend_file_modify_object, cal_backend_file_remove_object, cal_backend_file_receive_objects): call save() directly instead of mark_dirty(). 2003-10-30 Rodrigo Moya * pcs/cal-backend-file.c (cal_backend_file_modify_object): implemented THIS and ALL recurrences cases, blowing away or detaching recurrences from the main component as required. (get_rid_string): make it return const. (get_rid_timetype): new convenience function for getting libical's recurrence ID from a CalComponent. (cal_backend_file_is_read_only, remove_recurrence_cb, remove_component): fixed warnings. (remove_object_instance_cb): callback to remove the instances from the hash on the THISANDPRIOR and THISANDFUTURE cases. (cal_backend_file_remove_object): replaced mismatched if/else statement with proper management of each of the recurrence cases. 2003-10-29 JP Rosevear * gui/Makefile.am: build new files * gui/dialogs/comp-editor-util.c (date_edit_destroy_cb): unref the config manager (comp_editor_new_date_edit): set up a config manager for the date editor * gui/e-date-edit-config.[hc]: config manager for e-date-edit 2003-10-29 JP Rosevear * gui/dialogs/cal-prefs-dialog.c (update_config): no need to update config settings everywhere explicitly * gui/tasks-component.c (update_uris_for_selection): cast the widget * gui/gnome-cal.h: remove proto * gui/gnome-cal.c (setup_widgets): don't update config settings explicitly (gnome_calendar_update_config_settings): kill * gui/e-week-view.c: remove null chars * gui/e-tasks.h: remove proto * gui/e-tasks.c (set_timezone): set the timezone on the client (timezone_changed_cb): changed timezone callback (setup_config): setup config stuff (e_tasks_init): setup config and widgets here (e_tasks_new): construct is dead, no need to track all widgets (cal_opened_cb): set the timezone upon opening (e_tasks_update_all_config_settings): kill * gui/control-factory.c (control_factory_new_control): create the calendar ourselves * gui/calendar-config.c (on_timezone_set): don't update the settings everywhere here, we have config managers now * gui/calendar-component.c (impl_createControls): create the calendar ourselves * gui/calendar-commands.h: remove protos * gui/calendar-commands.c: remove dead functions 2003-10-29 JP Rosevear * gui/e-day-view-config.c (set_twentyfour_hour): set the format on the cal view * gui/e-week-view-config.c (set_twentyfour_hour): ditto * gui/e-cal-list-view-config.c (set_twentyfour_hour): set the 24 hour format on the view (twentyfour_hour_changed_cb): 24 hour format change callback (e_cal_list_view_config_set_view): handle 24 hour format changes 2003-10-29 JP Rosevear * gui/dialogs/recurrence-page.c (recurrence_page_finalize): unref config manager (init_widgets): create config manager for the e-calendar * gui/e-tasks.c (setup_widgets): create config manager for the table view (e_tasks_destroy): unref config manager (e_tasks_open): return FALSE not NULL (e_tasks_update_all_config_settings): don't configure the calendar table here, we have a manager * gui/calendar-config.c: remove dead config functions (handled by config managers now) 2003-10-29 JP Rosevear * gui/gnome-cal.c (set_timezone): set the timezone for all clients (timezone_changed_cb): callback for changes (setup_config): setup the configuration (setup_widgets): setup up configuration managers for the list view, task list and date navigator (gnome_calendar_init): setup config (gnome_calendar_destroy): destroy configuration managers and notifications (gnome_calendar_update_config_settings): remove dead bits * gui/e-mini-calendar-config.[hc]: manage configuration of an e-calendar * gui/e-day-view-config.h: remove extraneous comment, type the parent class correctly * gui/e-week-view-config.h: ditto * gui/e-day-view-config.c (e_day_view_config_class_init): type the class correctly (set_timezone): set timezone (timezone_changed_cb): timezone changed callback (e_day_view_config_set_view): track timezone changes * gui/e-week-view-config.c: ditto * gui/e-cell-date-edit-config.[hc]: manage configuration of a date edit cell * gui/e-calendar-table-config.[hc]: manage configuration of a e-calendar-table * gui/e-cal-list-view.c (get_current_time_cb): use the view timezone to compute * gui/e-cal-list-view-config.[hc]: manage configuration of a list view * gui/calendar-config.h: update protos * gui/calendar-config.c (calendar_config_add_notification_timezone): notify of timezone change (calendar_config_add_notification_dnav_show_week_no): notify of show week number setting change * gui/calendar-component.c (calendar_component_peek): remove bad comma * gui/Makefile.am: build new config classes 2003-10-29 Rodrigo Moya * gui/calendar-component.c (fill_popup_menu_callback): fixed typo in menu item label. * gui/e-cal-model.[ch] (e_cal_model_get_use_24_hour_format): new function. * gui/e-cal-view.[ch]: no need to keep the 'use_24_hour' setting, it's already in the model. (e_cal_view_get_use_24_hour_format, e_cal_view_set_use_24_hour_format): new functions. * gui/e-day-view.[ch] (e_day_view_get_24_hour_format, (e_day_view_set_24_hour_format): removed. (e_day_view_convert_time_to_display, e_day_view_update_event_label, e_day_view_get_time_string_width): use the ECalView's function to get the 24 hour format. * gui/e-week-view.[ch] (e_week_view_get_24_hour_format, e_week_view_set_24_hour_format): removed. (e_week_view_convert_time_to_display, e_week_view_get_time_string_width): use the ECalView's function to get the 24 hour format. * gui/e-day-view-top-item.c (e_day_view_top_item_draw_long_event): * gui/e-day-view-time-item.c (e_day_view_time_item_draw): * gui/e-week-view-event-item.c (e_week_view_draw_time): don't use the view's use_24_hour_format, but the ECalView method. 2003-10-28 Rodrigo Moya * gui/calendar-component.c (impl_createControls): connect to "fill_popup_menu" on the ESourceSelector. (fill_popup_menu_callback): add popup menu items here. (add_popup_menu_item): new function to add items to the popup menu. (new_calendar_cb): callbacks for the popup menu items. 2003-10-28 Rodrigo Moya * gui/e-cal-view.c: no need to keep the timezone here, it is already stored in the model. (e_cal_view_get_timezone): call e_cal_model_get_timezone(). (e_cal_view_set_timezone): call e_cal_model_set_timezone(). (e_cal_view_new_appointment_for): use the model's timezone. 2003-10-27 Dan Winship * pcs/cal-backend.c (cal_backend_notify_object_created, cal_backend_notify_object_modified, cal_backend_notify_object_removed): New; tell each query about a created/modified/removed object. * pcs/cal.c (cal_notify_object_created): Use cal_backend_notify_object_created. (cal_notify_object_modified, cal_notify_object_removed): Likewise for modified/removed (cal_notify_objects_received): we need both the before and after forms for the modified objects so they can be resolved as adds/modifies/removes per-query. But the caller can just call the cal_backend_* routines for each object anyway, so just remove the created/modified/removed lists. * pcs/cal-backend-sync.c (cal_backend_sync_receive_objects): Remove created/modified/removed list arguments. (_cal_backend_receive_objects): Likewise. * pcs/cal-backend-file.c (cal_backend_file_receive_objects): Remove created/modified/removed list arguments. Replace the one use of *removed with a call to cal_backend_notify_object_removed. 2003-10-27 JP Rosevear * gui/gnome-cal.c (setup_widgets): store config objects as well (gnome_calendar_set_default_uri): return FALSE if the pre-condition fails (gnome_calendar_update_config_settings): remove settings that are now handled by the config objects * gui/e-week-view.c (e_week_view_set_compress_weekend): queue a draw * gui/e-itip-control.c (start_default_server): comment out * gui/e-day-view-config.[hc]: a class to track config changes of interest to day views * gui/e-week-view.[hc]: ditto for week views * gui/calendar-config.h: add protos * gui/calendar-config.c: use the #defines for the keys and add notification routines * gui/calendar-config-keys.h: a list of defines for gconf keys * gui/Makefile.am: build new files 2003-10-27 Rodrigo Moya * gui/e-cal-model.h: changed fill_component_from_model virtual method to get an ETableModel, not an ECalModel. * gui/e-cal-model.c (ecm_append_row): the source model sent from ETable is an ETableModel, not an ECalModel. * gui/e-cal-model-calendar.c (ecmc_fill_component_from_model): get an ETableModel for the 'source_model' argument. * gui/e-cal-model-tasks.c (ecmt_fill_component_from_model): ditto. 2003-10-27 Rodrigo Moya * gui/tasks-component.c (add_uri_for_source): pass FALSE as the 'only_if_exists' parameter, so that the calendar gets created when it still does not exist. 2003-10-24 Rodrigo Moya * gui/tasks-component.c (tasks_component_init): initialize private structure on TasksComponent. 2003-10-24 Rodrigo Moya * gui/calendar-component.c (calendar_component_class_init): removed repeated initialization. (calendar_component_peek): use G_STRLOC for g_warning's. * gui/tsaks-control.[ch] (tasks_control_activate, tasks_control_deactivate): made these 2 functions public. * gui/tasks-component.[ch]: implementation of the tasks component. * gui/Makefile.am: * gui/GNOME_Evolution_Calendar.server.in.in: added tasks component. * gui/main.c: ditto. (factory): added code to create the tasks component when requested. 2003-10-24 Dan Winship * cal-client/cal-client.c (cal_client_get_changes): Remove type arg * conduits/calendar/calendar-conduit.c (pre_sync, post_sync): Update for that * conduits/todo/todo-conduit.c (pre_sync, post_sync): Likewise * idl/evolution-calendar.idl (getChanges): Remove type arg. * pcs/cal.c (impl_Cal_getChanges): Likewise * pcs/cal-backend.c (cal_backend_get_changes): Likewise * pcs/cal-backend-sync.c (cal_backend_sync_get_changes): Likewise * pcs/cal-backend-file.c (cal_backend_file_get_changes): Update for that * pcs/Makefile.am: build libpcs.la and libpcsfile.la instead of just .a. (libpcs_la_LIBADD): depend on libcal-util.la and libeutil.la (libpcsfile_la_LIBADD): depend on libpcs.la 2003-10-24 Rodrigo Moya * cal-util/cal-util.[ch] (cal_util_construct_instance, cal_util_remove_instances): new functions for individual instances management. * pcs/cal-backend-file.c (cal_backend_file_get_object): if we dont have a recurrence in our hash table, generate one for the specified recurrence ID. (match_recurrence_sexp): new function to match recurrences on regular expresessions. (match_object_sexp): call match_recurrence_sexp() for all recurrences. (cal_backend_file_modify_object): handle mod_types. (cal_backend_file_remove_object): handle mod_types. 2003-10-24 JP Rosevear * gui/gnome-cal.h: update protos * gui/gnome-cal.c (gnome_calendar_set_default_uri): set the default client based on uri * gui/calendar-component.c (add_uri_for_source): rename from load_uri_for_source and take a calendar (remove_uri_for_source): utility routine to remove the source's uri from the calendar (is_in_selection): checks to see if the uid of the given source matches any of those in the given selection (update_uris_for_selection): remove any uris no longer in the selection, add those that still exist (source_selection_changed_callback): call above (primary_source_selection_changed_callback): we have the calendar easily now; set the default by uri (control_activate_cb): handle activation and de-activation (impl_createControls): create the calendar control ourselves so we have access to the calendar (impl_dispose): release the source selection 2003-10-23 Rodrigo Moya * pcs/cal-backend-file.c (add_component): if the component received is an instance, add it to the recurrences hash table. (free_recurrence): callback for g_hash_table_foreach() to free the recurrences in the CalBackendFileObject structure. (free_object): call free_recurrence for each recurrence. (remove_recurrence_cb): g_hash_table_foreach() callback to remove recurrences from the calendar. (remove_component): remove all recurrences. (cal_backend_file_open): check write access on the file, and set read_only flag appropriately. (cal_backend_file_is_read_only): return the private flag. (cal_backend_file_init): initialize read_only flag. (cal_backend_file_get_object): deal with recurrences. * gui/alarm-notify/notify-main.c (main): unref the alarm notification service when terminating. (client_die_cb): call bonobo_main_quit instead of gtk_main_quit. 2003-10-23 * gui/gnome-cal.c (gnome_calendar_get_current_view_widget): just uses the views array and the current view type (setup_widgets): ditto (set_view): ditto (backend_died_cb): ditto (gnome_calendar_get_calendar_model): ditto (gnome_calendar_update_config_settings): ditto 2003-10-23 Rodrigo Moya * gui/e-day-view.c: accept also text/calendar for D&D. 2003-10-23 JP Rosevear * gui/e-day-view.c (e_day_view_on_top_canvas_drag_data_received): fix typo (e_day_view_on_main_canvas_drag_data_received): fix C99 issue, fix typo 2003-10-23 JP Rosevear * gui/gnome-cal.c (update_query): use the internal client list to create the queries (gnome_calendar_destroy): use the internal client list to disconnect signal handlers (gnome_calendar_add_event_uri): add the client to the internal list (gnome_calendar_remove_event_uri): remove the client from the internal list and lookup the client (gnome_calendar_update_config_settings): use the internal client list to update the config settings 2003-10-23 Harry Lu * cal-client/cal-client.c: (cal_client_get_timezone): remove and free op before return. * gui/e-cal-view.c (e_cal_view_add_event): modified from selection_received_add_event() so that it call be called out of e-cal-view.c. (selection_received): modified to call e_cal_view_add_event(). * gui/e-cal-view.h: add declaration for e_cal_view_add_event(). * gui/e-day-view.c (e_day_view_on_drag_data_get): Provide a icalcomponent for both TARGET_CALENDAR_EVENT and TARGET_VCALENDAR. (e_day_view_on_top_canvas_drag_data_received): If dragging between different windows, make it works like a copy and paste. (e_day_view_on_main_canvas_drag_data_received): ditto. 2003-10-23 JP Rosevear * cal-util/cal-recur.c: update g_date calls to non-deprecated calls * cal-util/Makefile.am: turn off deprecated funcs * cal-client/Makefile.am: turn off deprecated funcs * cal-client/cal-client.c (cal_client_get_error_message): add OK message * pcs/cal-backend.[hc]: remove dead funcs * pcs/query.c: tidy headers 2003-10-23 JP Rosevear * pcs/query.c (query_notify_objects_removed_1): Fix c/p typo - call removed instead of modify 2003-10-23 Rodrigo Moya * gui/e-cal-view.c (e_cal_view_init): connect also to ETableModel's "model_cell_changed" signal. (e_cal_view_set_model): likewise. (model_cell_changed_cb): callback for "model_cell_changed". (e_cal_view_destroy): use g_signal_handlers_disconnect_matched instead of g_signal_handlers_disconnect_by_func, so that all handlers are disconnected. 2003-10-23 JP Rosevear * pcs/cal.c (cal_notify_object_modified): guard against irrelevant args (ie if there was an error) (cal_notify_object_removed): ditto (cal_notify_timezone_added): ditto * pcs/cal-backend-sync.c (_cal_backend_is_read_only): init value to something known (_cal_backend_get_cal_address): ditto (_cal_backend_get_alarm_email_address): ditto (_cal_backend_get_ldap_attribute): ditto (_cal_backend_get_static_capabilities): ditto (_cal_backend_modify_object): ditto (_cal_backend_remove_object): ditto (_cal_backend_get_object_list): ditto 2003-10-22 JP Rosevear * gui/e-cal-list-view.c (e_cal_list_view_new): create a model and pass it as an arg during creation * gui/e-day-view.c (e_day_view_new): unref the model * gui/e-week-view.c (e_week_view_new): ditto 2003-10-22 JP Rosevear * cal-client/cal-client.c (cal_client_get_object): only change to invalid object error code if we got the object but couldn't parse it, and only check for timezones if we had success * gui/comp-util.c (cal_comp_is_on_server): don't throw a warning if the object simply does not exist 2003-10-22 Rodrigo Moya * gui/gnome-cal.[ch] (gnome_calendar_remove_event_uri): new function to remove calendars from the views. 2003-10-22 Ettore Perazzoli * gui/GNOME_Evolution_Calendar.server.in.in: Add an "evolution:button_icon" attribute. 2003-10-22 Ettore Perazzoli * gui/GNOME_Evolution_Calendar.server.in.in: Add an "evoution:button_sort_order" attribute. 2003-10-22 Ettore Perazzoli * gui/calendar-component.c (impl_createControls): Make the scrolled window have a GTK_SHADOW_IN shadow. * gui/dialogs/meeting-page.c (meeting_page_construct): Likewise. 2003-10-22 Ettore Perazzoli * gui/calendar-component.c (impl_createControls): Set the scrollbar policy to "automatic" for both the horizontal and vertical scrollbars around the source selector. 2003-10-22 Ettore Perazzoli * gui/GNOME_Evolution_Calendar.server.in.in: Add an "evolution:button_label" property on the component for use in the shell. 2003-10-21 Rodney Dawes * cal-client/Makefile.am: Fix typo in libcal_client_la_SOURCES 2003-10-21 Rodrigo Moya * gui/calendar-component.c (calendar_component_init): fixed a leak caused by only freeing 'base_uri' in some cases. 2003-10-21 JP Rosevear * gui/control-factory.c (get_prop): fix parse error (set_prop): gnome_calendar_open was renamed * conduits/todo/todo-conduit.c (start_calendar_server): adapt to the cal_client_new changes and the lack of a default calendar routine (pre_sync): don't have to pass a type for the default object any more * conduits/calendar/calendar-conduit.c (start_calendar_server): adapt to the cal_client_new changes and the lack of a default calendar routine (pre_sync): don't have to pass a type for the default object any more * cal-client/cal-client.c (cal_client_open_async): add FIXME comment 2003-10-21 Rodrigo Moya * pcs/cal-backend-file.c: store recurrences per object. (free_object): free correctly the CalBackendFileObject's contained in 'priv->comp_uid_hash'. (lookup_component, check_dup_uid, add_component, remove_component, match_object_sexp): adapted to changes in comp_uid_hash. 2003-10-20 Rodrigo Moya * gui/gnome-cal.[ch] (gnome_calendar_add_event_uri): renamed from gnome_calendar_open. * gui/calendar-component.c (load_uri_for_source): call gnome_calendar_add_event_uri instead of setting the URI property on the Bonobo control. 2003-10-17 Rodrigo Moya * gui/migration.c (process_calendar_dir): process subfolders. 2003-10-17 Rodrigo Moya * gui/migration.[ch] (migrate_old_calendars): new function. * gui/calendar-component.c (calendar_component_init): call the above function to migrate from old setups. * gui/Makefile.am: added new files. 2003-10-17 Jeffrey Stedfast * conduits/calendar/Makefile.am: Fixed for libical build changes. * conduits/todo/Makefile.am: Same. 2003-10-17 Rodrigo Moya * gui/e-cal-view.c (on_print): call e_cal_view_get_visible_time_range, not the gnome_calendar_ version. (e_cal_view_new_appointment_for, e_cal_view_new_appointment, e_cal_view_edit_appointment): new functions. * gui/gnome-cal.[ch] (gnome_calendar_new_appointment_for, gnome_calendar_new_appointment, gnome_calendar_edit_object): removed these functions, now available in e-cal-view. * gui/calendar-commands.c: * gui/e-day-view.c: * gui/e-week-view-event-item.c: * gui/e-week-view.c: replaced calls to gnome_calendar_* with e_cal_view_* equivalents. 2003-10-17 Rodrigo Moya * gui/e-cal-view.[ch] (e_cal_view_get_default_category): (e_cal_view_set_default_category): new functions. (e_cal_view_destroy): free the default_category field. * gui/e-day-view.[ch] (e_day_view_set_default_category): removed obsolete function. (e_day_view_init, e_day_view_destroy, e_day_view_do_key_press): use the ECalView's default_category. * gui/e-week-view.[ch] (e_week_view_set_default_category): removed obsolete function. (e_week_view_init, e_week_view_destroy, e_week_view_do_key_press): use the ECalView's default_category. * gui/gnome-cal.c (gnome_calendar_set_query): set the query also on the list view by using the priv->views array. (search_bar_category_changed_cb, gnome_calendar_set_default_client): use the priv->views array. (gnome_calendar_get_calendar_model): return the model for the current view widget. (gnome_calendar_open): removed tasks opening code. 2003-10-16 Rodrigo Moya * gui/dialogs/new-calendar.c (new_calendar_dialog): if the user presses Cancel, just terminate. 2003-10-16 Rodrigo Moya * gui/calendar-component.c (calendar_component_init): create directories for the newly-created calendars. * gui/dialogs/new-calendar.c (create_new_source_with_group): use e_mkdir_hier instead of mkdir. 2003-10-16 Rodrigo Moya * gui/calendar-component.c (calendar_component_init): if no groups are present in the configuration, create the "On This Computer" group and the "Personal" and "Work" calendars on it. * gui/dialogs/new-calendar.c (new_calendar_dialog): moved the source creation... (create_new_source_with_group): ...here, and made the code create the directory for the new calendar. 2003-10-15 Hans Petter Jansson * gui/e-select-names-editable.c (e_selct_names_editable_get_address): EDestination -> EABDestination. * gui/gnome-cal.c (setup_widgets): evolution_dir -> ".evolution". 2003-10-15 Rodrigo Moya * gui/e-select-names-editable.c (e_select_names_editable_get_address): use EABDestination instead of EDestination. * gui/gnome-cal.c (gnome_calendar_open): disabled tasks opening code. 2003-10-15 Rodrigo Moya * gui/e-meeting-list-view.c: adapted to new addressbook API. * gui/e-meeting-store.c: adapted to new addressbook API. (find_zone): fixed usage of icalcomponent where an icalproperty is expected. (refresh_busy_periods): fixed call to cal_client_get_free_busy(). * gui/e-meeting-time-sel.c (e_meeting_time_selector_construct): added missing variable. 2003-10-15 Jeffrey Stedfast * gui/dialogs/meeting-page.c: #include 2003-10-15 Rodrigo Moya * gui/e-meeting-list-view.c (start_addressbook_server): updated to new addressbook API. (book_open_cb): removed unneeded function, since we load the local addressbook synchronously. 2003-10-15 Rodrigo Moya * pcs/Makefile.am: added missing header directories. * pcs/cal-factory.h: include , not . * gui/dialogs/meeting-page.c: added missing headers. (meeting_page_construct): free 'backend_address' as returned by cal_client_get_cal_address(). Removed code to create the meeting model's ETable not removed with the merge. * gui/e-meeting-list-view.c: updated addressbook headers. * gui/gnome-cal.h: added missing ',' in the GnomeCalendarViewType enum. 2003-10-14 Rodrigo Moya * gui/e-day-view.c (e_day_view_update_query): dont set status messages here, already set in e_cal_view_update_query. (update_query): removed this function. (e_day_view_recalc_day_starts): call e_day_view_update_query, not update_query. * gui/e-week-view.c (e_week_view_update_query): dont set status messages here, already set in e_cal_view_update_query. * gui/gnome-cal.c (adjust_query_for_view): new function to adjust the query for the visible time range on a given view. (gnome_calendar_set_query): call adjust_query_for_view for each one of the views. 2003-10-14 Rodrigo Moya * gui/e-cal-view.c (e_cal_view_init): connect to signals on the model we create here, so that we get notifications for changes. * gui/gnome-cal.c (gnome_calendar_set_query): set the query on all models. (gnome_calendar_open): update the date navigator query. 2003-10-14 Rodrigo Moya * pcs/cal.c (cal_notify_timezone_requested): never send NULL strings to ORBit. * gui/e-cal-view.c (e_cal_view_create_popup_menu): removed unneeded variables. Also, fixed a typo that was making the menu options be disabled when they should be enabled. 2003-10-13 Rodrigo Moya * gui/e-cal-model.[ch] (e_cal_model_get_client_for_uri): new function. * gui/gnome-cal.[ch] (gnome_calendar_set_default_client): new function. * gui/calendar-component.c (primary_source_selection_changed_callback): set the default client on the calendar view to be the primary selection on the source list. 2003-10-13 Rodrigo Moya * gui/dialogs/new-calendar.c (new_calendar_dialog): set a default group on the calendar group option menu and create the source if all checks are passed. 2003-10-12 Rodrigo Moya * gui/dialogs/new-calendar.c (new_calendar_dialog): set up widgets loaded from the Glade file. 2003-10-10 Hans Petter Jansson * gui/Makefile.am (etspec_DATA): Add e-cal-list-view.etspec. (libevolution_calendar_la_SOURCES): Add e-cal-list-view.[ch]. * gui/calendar-commands.c (show_list_view_clicked): Implement. (calendar_get_text_for_folder_bar_label): Add case for list view. Use month case and tweak it so it doesn't show "%d - %d" if the time span contains only one day. (verbs): Add list view. (pixmaps): Add list view. * gui/calendar-view-factory.c (calendar_view_factory_get_title): Add list view case. (calendar_view_factory_get_type_code): Add list view case. * gui/control-factory.c (get_prop): Add list view case. * gui/e-cal-model.c (get_classification): Fix to conform to updated libical. (ecm_set_value_at): Add missing break statements. (ecm_get_color_for_component): Add braces for clarity. * gui/gnome-cal.c (gnome_calendar_get_current_view_widget): Add list view case. (get_focus_location): Add list view case. (connect_list_view_focus): Implement. (setup_widgets): Set up list view. (gnome_calendar_direction): Add list view case. (set_view): Add list view case. (gnome_calendar_setup_view_menus): Add list view factory. (gnome_calendar_construct): Account for list view. (gnome_calendar_update_config_settings): Account for list view. (get_days_shown): Implement list view case. * gui/gnome-cal.h (GnomeCalendarViewType): Add list view. * gui/e-cal-list-view.[ch]: Implement ECalListView, subclassing ECalView. 2003-10-10 Rodrigo Moya * gui/dialogs/new-calendar.[ch]: added new widget, which implements the dialog to create new calendars. * gui/dialogs/new-calendar.glade: basic mockup of the dialog. * gui/dialogs/Makefile.am: added new files. * gui/calendar-commands.c (file_new_calendar_cb): open the new calendar dialog to allow user to create a new cal. 2003-10-10 Rodrigo Moya * gui/control-factory.c (calendar_properties_init): pass the BonoboControl to get_prop/set_prop. (get_prop): obtain the GnomeCalendar from the control. (set_prop): ditto, and when the URI property is changed, sensitize the UI as approppriate. * gui/calendar-commands.c (calendar_control_sensitize_calendar_commands): made this function public. * gui/calendar-commands.h: added new prototype. 2003-10-10 Rodrigo Moya * gui/calendar-commands.c (file_new_calendar_cb, file_new_appointment_cb, file_new_event_cb, file_new_meeting_cb, file_new_task_cb): callbacks for "New..." verbs. (sensitize_calendar_commands): sensitize new verbs, and made it sensitize correctly based on the set of clients currently loaded. (sensitize_taskpad_commands): likewise. 2003-10-09 Hans Petter Jansson * gui/e-cal-model.c (get_classification): Adapt to libical API changes. (ecm_set_value_at): Break after each case, so we don't set the passed value in more than one field. 2003-10-09 Rodrigo Moya * gui/e-cal-view.c (e_cal_view_delete_selected_occurrence): * cal-client/cal-client.c (cal_client_remove_object): added missing argument when calling cal_client_remove_object_with_mod(). 2003-10-09 Rodrigo Moya * idl/evolution-calendar.idl: added missing 'rid' argument to the removeObject method. * cal-client/cal-client.c (cal_client_remove_object_with_mod): * pcs/cal-backend.h: * pcs/cal-backend.c (cal_backend_remove_object): * pcs/cal-backend-sync.h: * pcs/cal-backend-sync.c (cal_backend_sync_remove_object, _cal_backend_remove_object): * pcs/cal-backend-file.c (cal_backend_file_remove_object): * pcs/cal.c (impl_cal_removeObject): adapted to changes in IDL. 2003-10-09 Jeffrey Stedfast * cal-client/Makefile.am: INCLUDE path fixes for changes made to libical build. * cal-util/Makefile.am: INCLUDE path fixes for changes made to libical build. * cal-util/*.[c,h]: #include instead of * gui/Makefile.am: INCLUDE path fixes for changes made to libical build. * gui/*.[c,h]: #include instead of * gui/alarm-notify/Makefile.am: INCLUDE path fixes for changes made to libical build. * gui/alarm-notify/config-data.h: #include instead of * gui/dialogs/Makefile.am: INCLUDE path fixes for changes made to libical build. * gui/dialogs/comp-editor-util.c: #include instead of * gui/dialogs/e-delegate-dialog.c: #include instead of * importers/Makefile.am: INCLUDE path fixes for changes made to libical build. * pcs/Makefile.am: INCLUDE path fixes for changes made to libical build. * pcs/cal.c: #include instead of 2003-10-08 Harry Lu * gui/dialogs/alarm-options.glade: Make repeat-quantity and repeat-value of alarm option dialog numeric only. * gui/dialogs/task-details-page.glade: Make percent-complete of task details dialog numeric only. 2003-10-08 Chris Toshok * gui/dialogs/e-delegate-dialog.c (e_delegate_dialog_construct): EDestination => EABDestination, and e_destination => eab_destination. (e_delegate_dialog_get_delegate): same. (e_delegate_dialog_get_delegate_name): same. * gui/dialogs/comp-editor-util.c: remove unnecessary #include of e-destination.h. * gui/dialogs/alarm-options.c (alarm_to_malarm_widgets): EDestination => EABDestination, and e_destination => eab_destination. (malarm_widgets_to_alarm): same. * gui/e-meeting-model.c (book_open_cb): track change to error return codes. (start_addressbook_server): use e_book_async_get_default_addressbook. (contacts_cb): rename cursor_cb to this, as we no longer get passed a cursur, and we don't need to check the email address since the query is now "is" instead of "contains". (refresh_busy_periods): use an "is" query, and use e_book_async_get_contacts instead of getting a CardCursor. (process_section): this takes an EABDestination** instead of a SimpleCardList*, which is gone. (select_names_ok_cb): get "destinations" instead of "simple_card_list". 2003-10-08 Rodrigo Moya * cal-client/cal-client.c (cal_client_is_read_only): fixed documentation comments. * gui/calendar-commands.c (sensitize_calendar_commands): figure out read-only menu items to disable based on the currently selected object's CalClient. 2003-10-08 Rodrigo Moya * cal-client/cal-client.c: set better error m,essages on the E_CALENDAR_CHECK_STATUS macro. (cal_client_get_error_message): new function. * cal-client/cal-client.h: added new prototype. * gui/dialogs/comp-editor.c (save_comp): use the GError argument for the cal_client_create/_modify_object calls, and display the error message coming from the backend. * gui/comp-util.c (cal_comp_is_on_server): likewise. 2003-10-07 Dan Winship * idl/evolution-calendar.idl (getDefaultObject): Remove the "type" arg; the backend knows what type it is * pcs/cal.c (impl_Cal_getDefaultObject): Likewise * pcs/cal-backend.c (cal_backend_get_default_object): Likewise * pcs/cal-backend-sync.c (cal_backend_sync_get_default_object, _cal_backend_get_default_object): Likewise * pcs/cal-backend-file.c (cal_backend_file_get_default_object): Likewise. (Use cal_backend_get_kind() instead.) * cal-client/cal-client.c (cal_client_get_default_object): Likewise * gui/comp-util.c (cal_comp_event_new_with_defaults, cal_comp_task_new_with_defaults): Update calls to cal_client_get_default_object(). * pcs/cal-backend-sync.c (_cal_backend_get_static_capabilities): Use the right cal notification 2003-10-07 Rodrigo Moya * gui/e-cal-model.c (e_cal_model_create_component_with_defaults): dont clone NULL icalcomponent's. 2003-10-07 Rodrigo Moya * gui/e-cal-model.c (e_cal_model_get_default_client): make sure we always return a default client, if possible, since we rely on having a default client in many places. * gui/e-day-view.c (e_day_view_do_key_press): dont create event if e_cal_model_create_component_with_defaults returns NULL. * gui/e-week-view.c (e_week_view_do_key_press): dont create event if e_cal_model_create_component_with_defaults returns NULL. 2003-10-06 Rodrigo Moya * gui/e-cal-model.c (e_cal_model_create_component_with_defaults): make sure the component has always an UID. * gui/e-day-view.c (e_day_view_find_event_from_uid): * gui/e-week-view.c (e_week_view_find_event_from_uid): check pointers passed to strcmp(). 2003-10-06 Rodrigo Moya * gui/gnome-cal.c (gnome_calendar_open): added missing call to cal_client_open(). * cal-client/cal-client.c (cal_client_new): fixed documentation comments. (cal_client_open): emit CAL_OPENED signal with appropriate status codes. (open_sync): dont emit CAL_OPENED signal, it's already emitted in cal_client_open(). 2003-10-06 Rodrigo Moya * gui/comp-editor-factory.c (open_client): * gui/gnome-cal.c (gnome_calendar_open, gnome_calendar_construct): * gui/calendar-offline-handler.c (backend_go_offline, backend_go_online, calendar_offline_handler_init): adapted to changes in cal_client and manage GError's returned by cal_client_open. * gui/e-itip-control.c: dont run anymore sub event loops. (start_calendar_server): use synchronous interface for opening calendars. (start_default_server): renamed it from *_async. (start_calendar_server_cb): removed unneeded function. (object_requested_cb): use sync interface. * gui/e-tasks.c (e_tasks_construct): dont create the CalClient here. (e_tasks_open): do it here, where we've got all the info needed. * importers/icalendar-importer.c (update_single_object): killed warning. (ical_importer_new, vcal_importer_new): don't create CalClient's here. (load_file_fn): create them here. (vcal_load_file_fn): and here. (gnome_calendar_import_data_fn): fixed usage of cal_client_*. * */*: integrated JP's changes for synchronous open's in cal_client and one model per view instead of one model for all views. 2003-10-02 Rodrigo Moya * cal-client/cal-client.c (cal_client_modify_object): return FALSE if the icalcomponent is NULL. * gui/e-day-view.c (e_day_view_finish_resize): commit sequence on CalComponent after changing start/end dates. 2003-10-01 Rodrigo Moya * gui/e-day-view.c (process_component): * gui/e-week-view.c (process_component): expand recurrences here. 2003-09-30 Rodrigo Moya * pcs/cal-backend-file.c (match_recurrence_sexp): removed. (match_object_sexp): dont expand recurrences here. 2003-09-30 Mike Kestner * cal-util/cal-util-marshal.list : new VOID:STRING,STRING,STRING * gui/Makefile.am : build the new view/store/renderer/editable * gui/e-select-names-renderer.* : new completion cell renderer * gui/e-select-names-editable.* : new completion cell editable * gui/e-meeting-model.* : killed. code reused in list-view/store * gui/e-meeting-store.* : port of EMeetingModel to GtkTreeModel * gui/e-meeting-list-view.* : GtkTreeView subclass for attendee lists * gui/e-meeting-time-sel.c : Use the new store/view * gui/e-meeting-time-sel-item.c : Use the new store/view * gui/dialogs/Makefile.am : don't install the etspec anymore. * gui/dialogs/event-editor.c : Use the new store/view. * gui/dialogs/meeting-page.c : Use the new store/view. * gui/dialogs/shedule-page.c : Use the new store/view. * gui/dialogs/task-editor.c : Use the new store/view. 2003-09-29 JP Rosevear * conduits/todo/Makefile.am: link to libical-evolution * conduits/calendar/Makefile.am: ditto 2003-09-26 JP Rosevear * pcs/cal-backend.c (cal_backend_class_init): remove cal_added signal 2003-09-26 JP Rosevear * pcs/cal.h: add protos * pcs/cal.c (cal_get_backend): accessor (cal_get_listener): ditto * pcs/cal-factory.c (impl_CalFactory_getCal): update to new routine name * pcs/cal-backend.h: add protos * pcs/cal-backend.c (cal_backend_init): init client mutex (cal_backend_finalize): destroy client mutex (cal_destroy_cb): just remove the client (listener_died_cb): remove the client, the listener died so it can't really do anything (last_client_gone): signal the last client gone (cal_backend_add_client): add a client with locking and listen for the death of the listener (cal_backend_remove_client): remove client 2003-09-26 Rodrigo Moya * pcs/cal-backend-sync.c (_cal_backend_create_object): only free the returned UID if it's not NULL. * pcs/cal.c (cal_notify_object_created): dont send NULL strings to ORBit code. 2003-09-26 Rodrigo Moya * gui/comp-util.c (cal_comp_is_on_server): free the icalcomponent returned from cal_client_get_object, and return TRUE if we find the component on the backend. * gui/e-day-view.c (process_component): * gui/e-week-view.c (process_component): added missing case, so that we also display recurrent meetings starting before the time range and ending after the time range. * cal-client/cal-listener.c (impl_notifyReadOnly): pass the 'read_only' argument to the signal callback correctly (a gboolean not a 'gboolean *'). * gui/comp-editor-factory.c (resolve_pending_requests): removed the g_assert on 'oc->pending != NULL', since there are now cases (local calendar) where we get to call this function (cal_opened_cb) with no pending requests yet. 2003-09-25 JP Rosevear * gui/calendar-commands.c (publish_freebusy_cmd): adapt to new get_free_busy api * conduits/calendar/calendar-conduit.c (post_sync): ditto (pre_sync): ditto * conduits/todo/todo-conduit.c (pre_sync): ditto (post_sync): ditto * gui/e-meeting-model.c (refresh_busy_periods): ditto * gui/e-itip-control.c (send_freebusy): ditto * gui/e-cal-view.c (on_publish): ditto * cal-client/cal-listener.h: add signals * cal-client/cal-listener.c (build_change_list): move here from cal-client.c (impl_notifyChanges): implement (build_free_busy_list): util to create the GList of free busy objects (impl_notifyFreeBusy): implement (cal_listener_class_init): set free busy and changes epv methods, add signals * cal-client/cal-client.h: update protos * cal-client/cal-client.c (cal_get_changes_cb): get changes call back (cal_get_free_busy_cb): get free busy call back (cal_client_init): listen for free busy and changes signals (cal_client_get_changes): convert to new threaded sync api (cal_client_get_free_busy): ditto * pcs/cal.h: add protos * pcs/cal.c: remove dead type conversion function (impl_Cal_getChanges): implement by just calling, no return stuff (impl_Cal_getFreeBusy): ditto (cal_notify_changes): do getChanges callback (cal_notify_free_busy): do getFreeBusy callback * pcs/cal-backend.h: update protos, vmethods * pcs/cal-backend.c (cal_backend_get_free_busy): call through (cal_backend_get_changes): ditto * pcs/cal-backend-sync.h: add vmethods, protos * pcs/cal-backend-sync.c (cal_backend_sync_get_changes): call through (cal_backend_sync_get_free_busy): ditto (_cal_backend_get_changes): backend implementation, notify (_cal_backend_get_free_busy): ditto (cal_backend_sync_class_init): set free busy and changes implementations * pcs/cal-backend-file.c (cal_backend_file_get_free_busy): convert to sync backend method (cal_backend_file_compute_changes_foreach_key): remove from the hash here (cal_backend_file_compute_changes): no need to build the sequence here (cal_backend_file_get_changes): convert to sync backend method (cal_backend_file_class_init): set sync backend methods for free busy and changes * idl/evolution-calendar.idl: convert getChanges and getFreeBusy to new async api 2003-09-25 JP Rosevear * pcs/cal-backend.h: remove dead result enums * pcs/cal-backend.c: fix comments * idl/evolution-calendar.idl: remove dead exceptions 2003-09-25 JP Rosevear * pcs/cal.c (cal_notify_default_object): send back the empty string if the object is NULL (cal_notify_object): ditto 2003-09-25 JP Rosevear * gui/comp-editor-factory.c (edit_existing): convert to api changes * conduits/todo/todo-conduit.c (local_record_from_uid): ditto (pre_sync): ditto * conduits/calendar/calendar-conduit.c (local_record_from_uid): ditto (pre_sync): ditto * importers/icalendar-importer.c (update_single_object): ditto * gui/dialogs/comp-editor.c (obj_updated_cb): ditto * gui/e-itip-control.c (get_real_item): ditto (find_server): ditto * gui/comp-util.c (cal_comp_is_on_server): ditto (cal_comp_event_new_with_defaults): ditto (cal_comp_task_new_with_defaults): ditto * cal-client/cal-listener.h: add signals * cal-client/cal-listener.c (impl_notifyDefaultObjectRequested): implement (impl_notifyObjectRequested): ditto (cal_listener_class_init): set above epv implementations, add signals * cal-client/cal-client.h: update protos * cal-client/cal-client.c (cal_default_object_requested_cb): get default object callback (cal_object_requested_cb): get object callback (cal_client_init): listen for get and get default object signals (cal_client_get_default_object): convert to new sync api (cal_client_get_object): ditto * pcs/cal.h: add protos * pcs/cal.c (impl_Cal_getDefaultObject): just call the backend, it does the notification now (impl_Cal_getObject): ditto (cal_notify_default_object): do getDefaultObject response (cal_notify_object): do getObject response * pcs/cal-backend.h: remove vmethods, protos * pcs/cal-backend.c: remove a couple of dead functions (cal_backend_class_init): get_object_component is no longer a vmethod (cal_backend_get_default_object): call through (cal_backend_get_object): ditto * pcs/cal-backend-sync.h: add protos, vmethods * pcs/cal-backend-sync.c (cal_backend_sync_get_default_object): call through (cal_backend_sync_get_object): ditto (_cal_backend_discard_alarm): pass correct params to cal_notify_discard_alarm (_cal_backend_get_default_object): call through and notify (_cal_backend_get_object): ditto (cal_backend_sync_class_init): set backend implementations * pcs/cal-backend-file.c (cal_backend_file_get_default_object): convert to sync backend method (cal_backend_file_get_object): ditto (cal_backend_file_compute_changes_foreach_key): just look up the component rather than using the backend vmethod (cal_backend_file_remove_object): return valid sync status codes (cal_backend_file_class_init): move get_object, get_default_object to sync class * idl/evolution-calendar.idl: convert getObject and getDefaultObject to new async idl 2003-09-25 JP Rosevear * pcs/cal.c (impl_Cal_discardAlarm): just call the backend function, it does the notification (cal_notify_alarm_discarded): notify of discard alarm call * pcs/cal-backend.h: update proto * pcs/cal-backend.c (cal_backend_discard_alarm): call through * pcs/cal-backend-sync.h: add proto, vmethod * pcs/cal-backend-sync.c (cal_backend_sync_discard_alarm): call through (_cal_backend_discard_alarm): call through and notify (cal_backend_sync_class_init): set discard alarm implementation * pcs/cal-backend-file.c (cal_backend_file_discard_alarm): match sync backend vmethod (cal_backend_file_class_init): set alarm vmethod implementation * idl/evolution-calendar.idl: switch discardAlarm to new api * gui/alarm-notify/alarm-queue.c (remove_queued_alarm): match new api * cal-client/cal-listener.h: add signal * cal-client/cal-listener.c (impl_notifyAlarmDiscarded): implement (cal_listener_class_init): add alarm, send, receive epv functions, alarm signal * cal-client/cal-client.h: update proto * cal-client/cal-client.c (cal_alarm_discarded_cb): discardAlarm callback (cal_client_init): listen to discard alarm signal (cal_client_discard_alarm): implement with new threaded sync api 2003-09-25 JP Rosevear * idl/evolution-calendar.idl: remove unused user exceptions 2003-09-24 Rodrigo Moya * pcs/cal-backend-util.[ch] (cal_backend_util_fill_alarm_instances_seq): removed unneeded function. 2003-09-24 JP Rosevear * conduits/*/*.c: adjust to new timezone api calls * gui/*.c: ditto * gui/dialogs/*.c: ditto * cal-client/cal-listener.h: add new signals * cal-client/cal-listener.c (convert_status): convert invalid object as well (impl_notifyTimezoneRequested): implement (impl_notifyDefaultTimezoneSet): ditto (cal_listener_class_init): set epv implementations for timezone functions (cal_listener_class_init): create timezone response signals * cal-client/cal-client.h: update protos * cal-client/cal-client.c: fix return values all over the place (cal_get_timezone_cb): getTimezone response (cal_query_cb): setDefaultTimezone response (cal_client_init): listen for new response signals (cal_client_get_timezone): implement using new thread sync api (cal_client_ensure_timezone_on_server): use add timezone call (cal_client_set_default_timezone): oimplement using new thread sync api * cal-client/cal-client-types.h: add invalid object status code * idl/evolution-calendar.idl: getQuery no longer raises any user exceptions, remove dead types and exceptions 2003-09-24 JP Rosevear * pcs/cal.h: new protos * pcs/cal.c (impl_Cal_getTimezone): call backend implementation (impl_Cal_addTimezone): ditto (impl_Cal_setDefaultTimezone): ditto (cal_class_init): set epv implementations of timezone functions (cal_notify_timezone_requested): notify of get timezone response (cal_notify_default_timezone_set): notify of default timezone being set * pcs/cal-backend.h: new vmethods, protos * pcs/cal-backend.c (cal_backend_class_init): init new timezone vmethods (cal_backend_get_timezone): call through (cal_backend_set_default_timezone): ditto (cal_backend_add_timezone): ditto (cal_backend_internal_get_default_timezone): ditto (cal_backend_internal_get_timezone): ditto * pcs/cal-backend-sync.h: add vmethods, protos * pcs/cal-backend-sync.c (cal_backend_sync_get_timezone): call through (cal_backend_sync_set_default_timezone): ditto (_cal_backend_set_default_timezone): call through and notify (_cal_backend_get_timezone): ditto (cal_backend_sync_class_init): set backend implementations for new funcs * pcs/cal-backend-object-sexp.c (func_occur_in_time_range): get time_t values based on the zone * pcs/cal-backend-file.c: reorg so we don't have to prototype everything (cal_backend_file_get_timezone): implement the sync backend way (cal_backend_file_add_timezone): ditto (cal_backend_file_set_default_timezone): ditto (cal_backend_file_internal_get_default_timezone): internal method, for sexp comparison (cal_backend_file_internal_get_timezone): ditto * idl/evolution-calendar.idl: convert timezone routines to async api 2003-09-23 Rodrigo Moya * pcs/cal-backend-object-sexp.c (func_occur_in_time_range): dont expand recurrences, since they are supposed to be expanded in the backends. (instance_occur_cb, resolve_tzid): removed unneeded functions. * pcs/cal-backend-file.c (cal_backend_file_add_timezone): guard against adding the timezone if it's already there. 2003-09-23 JP Rosevear * pcs/cal.c (cal_notify_object_created): notify with the object, not the uid * gui/e-cal-model.c (add_new_client): don't listen for non-existent signal 2003-09-23 JP Rosevear * cal-client/cal-client.h: remove dead proto 2003-09-23 JP Rosevear * cal-client/cal-client.h: remove send result enum * gui/itip-utils.c (comp_server_send): use the new send_objects routine 2003-09-23 JP Rosevear * cal-client/cal-client.h: remove send result enum 2003-09-23 JP Rosevear * cal-client/cal-client.h: remove enum, protos * cal-client/cal-client.c: remove remove status enum typing 2003-09-23 Rodrigo Moya * importers/icalendar-importer.c (update_objects): new function to manage the update of components, taking into account VTIMEZONE components. (process_item_fn, gnome_calendar_import_data_fn): use update_objects instead of cal_client_update_objects. 2003-09-23 JP Rosevear * pcs/cal.h: update proto * pcs/cal.c (impl_Cal_addTimezone): just call add_timezone, it does the notification (cal_notify_object_created): only notify the query if the object matches (cal_notify_object_removed): ditto * pcs/cal-backend.h: update proto, vmethod * pcs/cal-backend.c (cal_backend_add_timezone): returns void * pcs/cal-backend-sync.h: update proto, vmethod * pcs/cal-backend-sync.c (cal_backend_sync_remove_object): add the object as an out param (_cal_backend_remove_object): get the object and pass it in the notification * pcs/cal-backend-file.c (cal_backend_file_create_object): kill cal_backend_file_update_objects call, its more efficient to create the comp ourselves; stamp the creation time, add the component to the toplevel (cal_backend_file_modify_object): kill the cal_backend_file_update_objects call, add the component to the toplevel (cal_backend_file_remove_object): pass back the object when removing 2003-09-23 JP Rosevear * cal-client/cal-query.c (cal_query_finalize): disconnect the signal handlers * cal-client/cal-client.c (cal_client_get_query): unref the listener when done 2003-09-23 Rodrigo Moya * gui/e-cal-view.c (selection_received): add VTIMEZONE components contained in the clipboard data to the backend. 2003-09-22 JP Rosevear * gui/dialogs/comp-editor.c (save_comp): modify and create instead of update, simplify mod code 2003-09-22 JP Rosevear * gui/e-day-view.c (e_day_view_finish_long_event_resize): modify the object instead of update, simplify the instance handling (e_day_view_finish_resize): ditto (e_day_view_on_top_canvas_drag_data_received): ditto (e_day_view_on_main_canvas_drag_data_received): ditto 2003-09-22 Rodrigo Moya * cal-client/cal-client.c (cal_client_get_alarms_in_range): use 'has-alarms' function in the search expression. * pcs/cal-backend-object-sexp.c (func_has_alarms): new SExp function. 2003-09-22 JP Rosevear * gui/e-day-view.c (e_day_view_on_editing_stopped): create the object if its not on the server or modify it if it is * gui/e-week-view.c (e_week_view_on_editing_stopped): we return if there is no text and it *not* on the server 2003-09-22 JP Rosevear * gui/e-week-view.c (e_week_view_on_editing_stopped): create the object if its not on the server or modify it if it is 2003-09-22 JP Rosevear * gui/gnome-cal.h: remove proto * gui/gnome-cal.c: remove gnome_calendar_unrecur_selection * gui/e-week-view.h: remove proto * gui/e-week-view.c: remove e_week_view_unrecur_appointment * gui/e-day-view.h: remove proto * gui/e-day-view.c: remove e_day_view_unrecur_appointment * gui/e-cal-view.c: remove on_unrecur_appointment (this is handled better via recurrence id's now) 2003-09-22 JP Rosevear * gui/e-itip-control.c (update_attendee_status): ifdef out, leave temporarily for reference, but otherwise it shouldn't be needed (update_item): switch to using receive objects (ok_clicked_cb): update item when receiving a reply * gui/e-calendar-table.c (selection_received): switch to using create object from update_objects * gui/e-cal-view.c (selection_received_add_event): util routine to prevent duplication (selection_received): use above * gui/e-cal-model.c (ecm_set_value_at): switch to using modify object from update_objects (ecm_append_row): switch to using create object from update_objects * gui/e-cal-model-calendar.c (ecmc_set_value_at): switch to using modify object from update_objects * gui/e-cal-model-tasks.c (ecmt_set_value_at): ditto 2003-09-22 Hans Petter Jansson * cal-util/Makefile.am (libical_util_la_LIBADD): libical.la -> libical-evolution.la * importers/Makefile.am (libevolution_calendar_importers_la_LIBADD): libicalvcal.la -> libicalvcal-evolution.la 2003-09-19 Rodrigo Moya * idl/evolution-calendar.idl: removed getAlarmsInRange and getAlarmsForObject methods. * pcs/cal.c (impl_Cal_getAlarmsInRange, impl_Cal_getAlarmsForObject): removed unneeded CORBA methods. (cal_class_init): dont set removed methods in the epv. * pcs/cal-backend.[ch]: removed get_alarms_in_range and get_alarms_for_object virtual methods. (cal_backend_get_alarms_in_range, cal_backend_get_alarms_for_object): removed. (cal_backend_class_init): dont set removed virtual methods. * pcs/cal-backend-file.c (cal_backend_file_get_alarms_in_range, cal_backend_file_get_alarms_for_object): removed. (cal_backend_file_class_init): dont set removed virtual methods. 2003-09-19 Rodrigo Moya * cal-client/cal-client.c (cal_client_get_alarms_in_range): changed to use queries. (build_component_alarms_list): create the alarm list from a list of iCalendar strings. (build_alarm_instance_list): removed. (cal_client_get_alarms_for_object): dont call the CORBA methods, just get alarms by itself. 2003-09-18 Rodrigo Moya * cal-client/cal-listener.[ch]: added "add_timezone" signal. (impl_notifyTimezoneAdded): implemented new CalListener method. (cal_listener_class_init): create "add_timezone" signal for the class. * cal-client/cal-client.[ch] (cal_client_add_timezone): new function. (cal_client_init): connect to "add_timezone" signal on the CalListener. (cal_add_timezone_cb): callback for the "add_timezone" signal. 2003-09-18 Rodrigo Moya * idl/evolution-calendar.idl: added 'notifyTimezoneAdded' method to the Calendar::Listener interface. * pcs/cal-backend-sync.[ch] (cal_backend_sync_add_timezone): (_cal_backend_add_timezone): new functions for the new virtual method implementation. * pcs/cal.[ch] (cal_notify_timezone_added): new function. * pcs/cal-backend-file.c (cal_backend_add_timezone): converted to return a CalBackendSyncStatus. (cal_backend_file_class_init): the 'add_timezone' method we implement is the one in the CalBackendSync class. (cancel_receive_object): added missing 'return'. (free_cal_component): removed unused function. 2003-09-17 Rodrigo Moya * pcs/cal-backend-file.c (cal_backend_add_timezone): added new virtual method implementation. * pcs/cal.c (impl_Cal_addTimezone): check return value from cal_backend_add_timezone, and set an exception if an error is returned. 2003-09-16 Rodrigo Moya * idl/evolution-calendar.idl: added addTimezone method. * pcs/cal.c (impl_Cal_addTimezone): implemented new method. (cal_class_init): set new method on the epv. * pcs/cal-backend.[ch]: added 'add_timezone' virtual method. (cal_backend_add_timezone): implemented new virtual method. * pcs/cal-backend-file.c (cal_backend_file_modify_object): it's cal_component_get_as_string, not cal_component_as_string. * cal-client/cal-client.c (cal_client_ensure_timezone_on_server): dont use anymore updateObjects method, use addTimezone instead. 2003-09-16 Rodrigo Moya * conduits/todo/Makefile.am: removed libwombat reference. 2003-09-15 Rodrigo Moya * pcs/cal-backend-file.c (cal_backend_file_create_object): return the UID of the added object. (cal_backend_file_remove_object): ditto for old_object. 2003-09-15 JP Rosevear * conduits/todo/todo-conduit.c (replace_record): switch to modify object (add_record): switch to using create object * conduits/calendar/calendar-conduit.c (process_multi_day): switch to using create object (add_record): switch to using create object (replace_record): switch to modify object * cal-client/cal-listener.h: add signals * cal-client/cal-listener.c (impl_notifyObjectsReceived): implement listener method (build_object_list): ditto (cal_listener_class_init): create receive_objects and send_objects signals * cal-client/cal-client.h: add, update protos * cal-client/cal-client.c (cal_objects_received_cb): receive_objects callback (cal_objects_sent_cb): send_objects callback (cal_client_init): listen for above signals (cal_client_create_object): pass back uid (cal_client_receive_objects): implement (cal_client_send_objects): ditto * idl/evolution-calendar.idl: add receive/send objects methods and yank updateObjects * pcs/cal.h: add protos * pcs/cal.c (impl_Cal_receiveObjects): implement (impl_Cal_sendObjects): ditto (cal_class_init): add epv methods (cal_notify_objects_received): notify of objects received call, updating queries (cal_notify_objects_sent): notify of objects sent * pcs/cal-backend.h: remove proto * pcs/cal-backend.c (cal_backend_class_init): remove obj_updated signal (cal_backend_class_init): init vmethods properly (cal_backend_receive_objects): call through (cal_backend_send_objects): ditto * pcs/cal-backend-sync.h: add protos, vmethods * pcs/cal-backend-sync.c (cal_backend_sync_receive_objects): call through (cal_backend_sync_send_objects): ditto (_cal_backend_receive_objects): call backend method and notify (_cal_backend_send_objects): ditto (cal_backend_sync_class_init): override send/receive object vmethods * pcs/cal-backend-file.c (cal_backend_file_class_init): set remove/send objects sync vmethods (cal_backend_file_create_object): remove call to dead method (cal_backend_file_remove_object): ditto (cal_backend_file_modify_object): ditto (cancel_received_object): cancel an object (check_tzids): check we have all the tzid's for the object (cal_backend_file_receive_objects): receive a bunch of objects via itip (cal_backend_file_send_objects): skeleton implementation 2003-09-15 Rodrigo Moya * idl/evolution-calendar.idl: added InvalidObject CallStatus. * pcs/cal-backend-file.c (cal_backend_file_create_object): implemented. (cal_backend_file_modify_object): implemented. 2003-09-15 Harry Lu * gui/apps_evolution_calendar.schemas: change last_notification_time's type from string to int. 2003-09-12 Bolian Yin * e-week-view.c (e_week_view_focus): make jump button focusable (e_week_view_on_jump_button_event): key_press and focus event for jump button (e_week_view_jump_to_button_item): new function, jump to the day view. (e_week_view_is_jump_button_visible): new function. 2003-09-12 Rodrigo Moya * pcs/cal.c (cal_notify_cal_address, cal_notify_alarm_email_address, cal_notify_ldap_attribute, cal_notify_static_capability): make sure we always notify listeners, regardless of whether the string is empty or not. * cal-client/cal-client.c (check_capability): guard against using NULL strings with strstr. 2003-09-12 JP Rosevear * cal-client/client-test.c (cal_opened_cb): listen for other query signals * cal-client/cal-listener.h: add signals * cal-client/cal-listener.c (impl_notifyObjectCreated): implement (impl_notifyObjectModified): implement (cal_listener_class_init): assign epv implementations (cal_listener_class_init): add create/modify object signals * cal-client/cal-client.h: add protos * cal-client/cal-client.c (cal_object_created_cb): object created callback (cal_object_modified_cb): object modified callback (cal_client_init): listen for create/modify object signals from the listener (cal_client_create_object): call the create object method (cal_client_modify_object): call the modify object method * cal-client/client-test.c (cal_opened_cb): listen for all the query signals, tidy 2003-09-12 JP Rosevear * pcs/cal.c (impl_Cal_createObject): implement (impl_Cal_modifyObject): ditto (cal_class_init): set epv methods for create/modify * pcs/cal-backend.h: add protos, vmethod * pcs/cal-backend.c (cal_backend_class_init): init new vmethods (cal_backend_create_object): call through (cal_backend_modify_object): ditto * pcs/cal-backend-sync.h: add protos, vmethods * pcs/cal-backend-sync.c (cal_backend_sync_create_object): call through (cal_backend_sync_modify_object): ditto (_cal_backend_create_object): create object and notify (_cal_backend_modify_object): modify object and notify * pcs/cal-backend-file.c (cal_backend_file_create_object): skeleton routine for creating objects (cal_backend_file_modify_object): ditto for modifying * idl/evolution-calendar.idl: add createObject and modifyObject calls 2003-09-12 JP Rosevear * pcs/cal.c (cal_notify_object_removed): its uid, not uids 2003-09-12 JP Rosevear * pcs/query.h: add protos * pcs/query.c (query_object_matches): use the sexp to check for a match (query_notify_objects_added_1): notify of one object added to query (query_notify_objects_modified_1): ditto for modification (query_notify_objects_removed_1): ditto for removal * pcs/cal.h: add protos * pcs/cal.c (cal_notify_object_created): notify of object creation (cal_notify_object_modified): notify of object modification (cal_notify_object_removed): use the _1 routines * pcs/cal-backend-file.c (match_recurrence_sexp): this returns a boolean (cal_backend_file_update_objects): don't signal removals here now * idl/evolution-calendar.idl: add object created and modified responses 2003-09-11 JP Rosevear * pcs/cal.h: update proto * pcs/cal.c (cal_notify_object_removed): notify relevant queries of removal * pcs/cal-backend.c (cal_backend_get_queries): ref the list before passing it back * pcs/cal-backend-sync.c (_cal_backend_remove_object): pass uid to notification 2003-09-11 JP Rosevear * pcs/cal-backend-file.c (match_recurrence_sexp): don't unref the component * cal-client/client-test.c (cal_opened_cb): listen to objects added signal (objects_added_cb): print the object uid 2003-09-11 JP Rosevear * pcs/cal-backend-object-sexp.c (cal_backend_object_sexp_text): return the base text 2003-09-11 JP Rosevear * gui/gnome-cal.c (update_query): fix c/p typo 2003-09-11 JP Rosevear * gui/gnome-cal.c (update_query): start the query * gui/e-cal-model.c (update_query_for_client): ditto * cal-client/client-test.c (cal_opened_cb): ditto 2003-09-11 JP Rosevear * cal-client/cal-query.h: add proto * cal-client/cal-query.c (cal_query_start): start the query 2003-09-11 JP Rosevear * gui/dialogs/delete-error.c (delete_error_dialog): accept GError and base error messages on that * gui/dialogs/delete-error.h: update proto * gui/e-tasks.c (e_tasks_delete_completed): pass extra param to cal_client_remove_object * conduits/todo/todo-conduit.c (delete_record): ditto * conduits/calendar/calendar-conduit.c (process_multi_day): ditto (delete_record): ditto * gui/gnome-cal.c (gnome_calendar_purge): ditto * gui/dialogs/comp-editor.c (delete_comp): ditto * gui/e-cal-view.c (e_cal_view_cut_clipboard): pass the error to delete_error_dialog (delete_event): ditto (e_cal_view_delete_selected_occurrence): ditto * gui/e-itip-control.c (remove_item): ditto * gui/e-calendar-table.c (delete_selected_components): ditto * cal-client/cal-listener.h: add signal * cal-client/cal-listener.c (impl_notifyObjectRemoved): implement (cal_listener_class_init): set object removed implementation and create signal * cal-client/cal-client.h: update protos * cal-client/cal-client.c (cal_object_removed_cb): object removal callback (cal_client_init): listen for object removal signal (cal_client_remove_object_with_mod): make call synchronous (cal_client_remove_object): pass new params * pcs/cal.h: add proto * pcs/cal.c (impl_Cal_removeObject): just call the backend function (cal_notify_object_removed): notify of removal * pcs/cal-backend.h: remove and update protos, remove signal * pcs/cal-backend.c (cal_backend_class_init): kill obj_removed signal (cal_backend_remove_object): there is no return value now * pcs/cal-backend-sync.h: add vmethod, proto * pcs/cal-backend-sync.c (cal_backend_sync_remove_object): call through (_cal_backend_remove_object): remove the object and then do the notification * pcs/cal-backend-file.c (cal_backend_file_class_init): remove object is not part of the sync class (cal_backend_file_update_objects): there is no more removed signal (cal_backend_file_remove_object): return sync status codes * idl/evolution-calendar.idl: make removeObject oneway and and a notification method in the listener 2003-09-11 Rodrigo Moya * pcs/query.[ch] (query_get_text): new function. (query_get_object_sexp): new function. * pcs/cal-backend-file.c (cal_backend_file_start_query): implemented. 2003-09-11 Hans Petter Jansson * cal-util/Makefile.am (libcal_util_la_LIBADD): libical-evolution.la -> libical.la * cal-util/cal-component.c (cal_component_get_classification) (cal_component_set_classification) (get_text_list) (get_icaltimetype) (get_datetime) (get_period_list) (get_recur_list) (cal_component_get_transparency) (cal_component_set_transparency): Adapt to new libical. * cal-util/cal-util.c (cal_util_event_dates_match): Ditto. * pcs/cal-backend-file.c (create_user_free_busy): Ditto. * gui/e-cal-model-tasks.c (get_completed) (get_due) (get_due_status): Ditto. * gui/e-cal-model.c (get_dtstart) (set_classification): Ditto. * gui/e-cal-model-calendar.c (get_dtend) (get_transparency) (set_transparency): Adapt to new libical and fix a comparison bug. * importers/Makefile.am (libevolution_calendar_importers_la_LIBADD): libical-evolution.la -> libical.la 2003-09-11 Dan Winship * cal-util/Makefile.am (privlib_LTLIBRARIES): Remove libcal-util-static.la * cal-client/Makefile.am (noinst_LTLIBRARIES): Remove libcal-client-static.la * conduits/calendar/Makefile.am (libecalendar_conduit_la_LIBADD): use non-static libraries. The static ones were only needed for libtool 1.3. * conduits/todo/Makefile.am (libetodo_conduit_la_LIBADD): Likewise * gui/Makefile.am (IDL_GENERATED): Don't compile the calendar idl here. It's already in libcal-client. 2003-09-11 Frederic Crozat * conduits/todo/Makefile.am: Statically link with wombat. Fix ETodo conduit. (Mdk bug #5348) 2003-09-10 JP Rosevear * pcs/cal.h: update proto * pcs/cal.c (impl_Cal_getObjectList): just call the backend, it will do the notification now (cal_notify_object_list): the list is a list of strings * pcs/cal-backend.h: update vmethod, proto * pcs/cal-backend.c (cal_backend_get_object_list): call through * pcs/cal-backend-sync.h: add proto, vmethod * pcs/cal-backend-sync.c (cal_backend_sync_get_object_list): call through (_cal_backend_get_object_list): get the list of objects from the sync backend and do the notification (cal_backend_sync_class_init): set vmethod implementation * pcs/cal-backend-file.c (cal_backend_file_class_init): the get object list call is now part of the sync backend (cal_backend_file_get_object_list): return a status and put the object list in the passed in param 2003-09-10 JP Rosevear * pcs/cal-backend.c (cal_backend_finalize): unref the elist (cal_backend_init): init the query elist 2003-09-10 JP Rosevear * gui/gnome-cal.c (dn_query_objects_added_cb): match new query signals - just tag here (dn_query_objects_modified_cb): always retag (dn_query_objects_removed_cb): ditto (update_query): connect to new signals (gnome_calendar_destroy): we don't keep a list of expunging queries (gnome_calendar_purge): no need to do the expunge async, just get the object list immediately * gui/e-tasks.c (e_tasks_delete_completed): no need to do the expunge async, just get the object list immediately * gui/e-cal-model.c (query_objects_added_cb): callback for objects added to the query (query_objects_modified_cb): ditto for modifications (query_objects_removed_cb): ditto for removed (query_progress_cb): progress of the query (query_done_cb): query is done (update_query_for_client): connect to the new signals * cal-client/client-test.c (cal_opened_cb): run a query * cal-client/cal-query.c: we are given the listener now - listen for signals from the listener and emit signals matching the api changes * cal-client/query-listener.[hc]: rewrite to match new query listener methods and emit signals rather than using function callbacks * cal-client/cal-marshal.list: add to marshallers * cal-client/cal-listener.h: add query signal * cal-client/cal-listener.c (impl_notifyQuery): implement (cal_listener_class_init): set notifyQuery method (cal_listener_class_init): add query signal * cal-client/cal-client.h: update protos * cal-client/cal-client.c (cal_query_cb): handle response to getQuery (cal_client_init): listen for query signal (cal_client_get_query): get a query from the calendar * pcs/query.h: update protos * pcs/query.c: rewrite to implement the query start method and provide notification calls * pcs/cal.h: add proto * pcs/cal.c (impl_Cal_getQuery): re-implement so the backend doesn't create the query for us (cal_notify_query): respond with the query * pcs/cal-factory.c: re-order includes * pcs/cal-common.h: add types * pcs/cal-backend.h: update protos, vmethods * pcs/cal-backend.c (cal_backend_class_init): init start_query vmethod (cal_backend_finalize): free mutex (cal_backend_start_query): call through (cal_backend_add_query): add a query to the list the backend is running (cal_backend_get_queries): get the query list * pcs/cal-backend-object-sexp.h: add proto * pcs/cal-backend-file.c (cal_backend_file_start_query): skeleton for new backend implementation * pcs/Makefile.am: don't build dead files * idl/evolution-calendar.idl: make the getQuery call async, make the query listener calls oneway and match the addressbook 2003-09-09 Rodrigo Moya * pcs/cal-backend-file.c (cal_backend_file_get_object_component): added case for getting the individual recurrences if 'rid' is not NULL, 2003-09-09 Rodrigo Moya * pcs/cal-backend-file.c (match_object_sexp): expand recurrences for recurrent objects. (match_recurrence_sexp): add the recurrences that match the query expression to the object list. 2003-09-08 Rodrigo Moya * pcs/cal-backend-file.c: don't store all recurrences in the private structure. 2003-09-04 Rodrigo Moya * gui/e-day-vie