2000-07-25  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_summary_free): Fixed the
	real problem that Peter was running into.

2000-07-25  Dan Winship  <danw@helixcode.com>

	* camel-mime-message.c (write_to_stream): Don't add a Mime-Version
	header to a message that already has one.

	* camel-internet-address.c (internet_encode): Don't put <>s around
	addresses with no name part.

2000-07-25  Peter Williams  <peterw@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_expunge): Set 
	imap_folder->summary to NULL after calling imap_summary_free,
	so we don't get stuck with a junk summary pointer. Should
	we free it at all?

2000-07-25  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (camel_imap_folder_changed):
	Optimized to try and get the new message headers without reloading
	the entire summary from scratch.
	(imap_get_summary_internal): Will now sync() before attempting to
	reload the summary so that flags are set in the reloaded summary
	as well.

2000-07-24  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (get_folder): Updated to give
	special attention to the root folder.

	* providers/imap/camel-imap-folder.c
	(imap_get_subfolder_names_internal): Updated to handle the root
	folder
	(imap_get_message_count_internal): return 0 if folder can't hold
	messages
	(camel_imap_folder_new): Change so that root folder gets special
	attention and always gets can_hold_messages set to FALSE

2000-07-24  Dan Winship  <danw@helixcode.com>

	* camel-folder.c: Remove exceptions from a number of methods that
	work on what ought to be static data: get_parent_folder,
	get_parent_store, get_message_count, get_unread_message_count,
	get_permanent_flags, get_message_flags, set_message_flags,
	get_message_user_flag, set_message_user_flag, get_uids,
	get_summary, get_subfolder_names. Turn camel_folder_delete_message
	into a macro. (Mostly a pull-up from the camel-async branch.)

	* providers/{imap,mbox,nntp,pop3,vee}: Update for CamelFolder
	changes

2000-07-24  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_message_info): Updated
	to port easily to the new Camel API
	(imap_init): Don't SELECT INBOX, we don't need to do that

2000-07-24  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (camel_imap_folder_new): 
	Initialize the summary and subfolder listing.
	(imap_summary_free): Now takes a GPtrArray arg rather than a 
	CamelImapFolder as it increases it's usefullness for free()'ing
	temporary summaries.
	(imap_get_message_count_internal): A new convenience function for
	getting the actual message count on a server to be used by 
	imap_get_summary_internal)
	(imap_get_message_count): Since the Camel API is on the move again, 
	the future version of this function will not be able to make a
	call to the store, it must only access previously fetched data (thus 
	the creation of the _internal function)
	(imap_get_subfolder_names_internal): Again, because the future version
	of imap_get_subfolder_names will not take an exception, we must rename
	this function which will be called by camel_imap_folder_new()
	(imap_get_subfolder_names): We now return the previously collected
	subfolder listing that the _internal function fetched previously
	(imap_get_summary_internal): Again, same idea as the previous _internal
	functions...
	(imap_get_summary): Again... now returns a previously aquired summary

	* providers/imap/camel-imap-store.c (imap_noop): This will hopefully
	prevent the imap store from disconnecting.
	(imap_connect): Modified to add a gtk timeout event that will call
	imap_noop() every 10 minutes (we may want to change this time value)
	(imap_disconnect): Modified to remove the NOOP timeout event from the
	store.
	(camel_imap_command_extended): Commented out the code that would try
	and detect if the store was disconnected and then reconnect if it was
	needed.

2000-07-24  Dan Winship  <danw@helixcode.com>

	* camel-folder.[ch]: Remove camel_folder_get_message_uid, which
	was not used, and not implemented by any provider.

	* providers/nntp/camel-nntp-folder.c: Remove get_message_uid
	non-implementation.

	* camel-folder-pt-proxy.[ch], camel-arg-collector.c,
	camel-marshal-utils.[ch]: Bye bye bye.

	* Makefile.am: remove reference to camel-arg-collector.c

2000-07-23  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (imap_disconnect): Made it a
	little more forgiving. Also set current_folder to NULL as there is
	no selected folder after a disconnect.
	(stream_is_alive): Detects whether or not a socket is "alive"
	(camel_imap_command_extended): Use stream_is_alive() to aid in the
	detection of a disconnected state.

2000-07-22  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (get_folder): Clear
	CamelExceptions when appropriate (eg when folder is marked as
	\NoSelect). Still needs some cleanup and perhaps Dan will have a
	better way of doing this as this seems like a messy way of
	handling this.

	* providers/imap/camel-imap-folder.c (imap_get_uids): Took out
	some debug statements as they are no longer needed.

2000-07-21  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_subfolder_names):
	Updated to not strip out subfolders that are marked as \NoSelect
	because this will be correctly handled in store->get_folder from
	now on.

	* providers/imap/camel-imap-store.c (folder_is_selectable): New
	convenience function for use in get_folder().
	(parse_list_response): Now takes a char **flags argument which is
	needed by folder_is_selectable().
	(imap_connect): Updated to reflect changes to
	parse_list_response().

2000-07-21  Jeffrey Stedfast  <fejj@helixcode.com>
	
	* providers/imap/camel-imap-stream.c (stream_read): Updated with
	some of the same fixes I've made to camel-imap-folder.c like
	recalculating message part lengths.

	* providers/imap/camel-imap-store.c (camel_imap_command_extended):
	Rewrote the code to check for "* %d RECENT". Still needs to be
	modified, but should no longer cause an infinite loop by detecting
	mis-detecting RECENT messages.

2000-07-20  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_summary):
	(imap_get_message_info): Oops. Fix UID parser to allow 0 and 9 to
	be in the range of valid UID chars.

2000-07-19  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c: General cleanup working
	towards getting Actions->Expunge working correctly.

	* providers/imap/camel-imap-store.c
	(cammel_imap_command_extended): Added code to look for "* %d
	RECENT" and to emit the folder_changed signal if there are any
	recent messages. Note: this is a hack and needs to be rewritten
	badly.

2000-07-19  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_summary): If the
	folder's message count is not the same as the number of summaries,
	free the old summary and create a new summary.

2000-07-18  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c
	(camel_imap_folder_class_init): Added in
	imap_[g,s]et_message_user_flag() methods
	(imap_get_message_info): Rewrote to use the more efficient way of
	downloading summary information and also added a UID comparison so
	that if the UID requested doesn't match the UID received, it
	returns NULL.  FIXME: When the mailer gets NULL when it requested
	message info, it seems that it displays a row for that message and
	when you try and select the blank row, it segfaults.

	* providers/imap/camel-imap-store.c (get_folder): Oops, this
	should not be checking against "/", it should be checking against
	dir_sep.

	* providers/imap/camel-imap-folder.c (imap_parse_subfolder_line):
	Updated to trim out the leading namespace.
	(imap_get_subfolder_names): Let the subfolder parser trim the
	namespace off the folder name.

2000-07-17  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (imap_disconnect): Send a
	"LOGOUT" command.

	* providers/imap/camel-imap-folder.c (imap_get_message): Hacks to
	get IMAP code to work with CommunigatePro and MS Exchange (and any
	other servers that send back a UID at the end of each FETCH inside
	of the main body of the message part).
	(imap_sync): Un-#if 0 the code that sets the flags on the IMAP
	server for messages that have changed. Oops, don't mask with
	DELETED to find out if the message has been answered ;-)
	(imap_expunge): sync before expunging.

2000-07-16  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c: All SELECT calls now pass
	a NULL folder argument to camel_imap_command_extended() since it's
	not needed.
	(imap_connect): Moved service_class->connect() to the point right
	after a connection is established with the server rather than
	waiting until the end of the function.
	(camel_imap_command): Updated the documentation comment
	(camel_imap_command_extended): Before sending a command, first
	check to make sure we are connected; if we aren't, then reconnect.
	Don't strncmp() command with "SELECT" as it's redundant.

	* providers/imap/camel-imap-folder.c: All SELECT calls now pass
	a NULL folder argument to camel_imap_command_extended() since it's
	not needed. Also s/camel_imap_command/camel_imap_command_extended as
	I will probably be doing away with camel_imap_command() or at least
	only using it for LOGIN and similar commands where the server won't
	notify us of any recent messages.

2000-07-15  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (camel_imap_folder_new): 
	One last fix to get rid of hard-coded "/" directory separators

2000-07-14  Jeffrey Stedfast  <fejj@helixcode.com>

	* string-utils.c (string_unquote): New convenience function
	to unquote a string if it's encapsulated by "'s
	
	* providers/imap/camel-imap-folder.c:
	* providers/imap/camel-imap-store.c: Made the necessary changes
	to stop using hard coded directory separators.

2000-07-13  Dan Winship  <danw@helixcode.com>

	* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load):
	If the summary is for a smaller mbox, and rebuilding from the
	last-known end position fails, try rebuilding from the beginning.
	Deals with the case where the user edits the mbox and makes it
	bigger, without adding new messages.

2000-07-13  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c: 
	* providers/imap/camel-imap-store.c: If a SELECT fails, set
	imap_store->current_folder to NULL so a SELECT is forced before
	any message/folder operations are requested. Also, because some
	users don't use a namespace, make sure that if the url->path is 
	"/" we don't use it when creating the folder_path.
	(camel_imap_command[_extended]): Since we allow the passing of
	a NULL folder which we can use to bypass a forced SELECT, no need
	to check for the individual commands that don't require a folder
	to be selected.

2000-07-13  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c: 
	* providers/imap/camel-imap-store.c: Updated to use CAMEL_IMAP_OK, 
	CAMEL_IMAP_NO, CAMEL_IMAP_BAD, and CAMEL_IMAP_FAIL rather than the 
	ones copied from the POP3 provider. 

2000-07-13  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_summary): Oops.
	If the number of messages in the folder is 0, don't fetch
	summaries 1 thru 0, just return an empty summary.
	(imap_copy_message_to): Fixed to use message UID and also send
	the source folder as an arg to camel_imap_command rather than NULL.
	(imap_move_message_to): Same.
	(imap_init): If SELECT is successful, we need to set the current
	folder to the one selected, this was causing problems with move/copy

2000-07-13  Dan Winship  <danw@helixcode.com>

	* camel-service.h: define a set of CAMEL_SERVICE_URL_ALLOW_* flags
	parallel to the _NEED_* flags, and make the _NEED_* flags imply
	the _ALLOW_* ones.

	* providers/imap/camel-imap-store.c (camel_imap_store_init): imap
	urls ALLOW_PATH

2000-07-13  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_summary): New
	and improved approach to fetching an entire folder summary
	that should be much much faster than the old way as it gets
	the entire folder summary in 1 shot rather than requesting
	message by message. As with the last update, this version
	also only fetches the minimum number of header fields.
	(imap_get_summary): Oops, forgot to free the temp 
	GPtrArray *headers

2000-07-13  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_summary): Don't
	fetch the entire RFC822 header, just fetch the fields we want.
	(imap_get_message_info): Same.

2000-07-13  Not Zed  <NotZed@HelixCode.com>

	* camel-mime-filter-basic.c (camel_mime_filter_basic_new_type):
	Reset filter on setup.
	(reset): When resetting qp encoding, set the state to -1, instead
	of 0.

	* camel-mime-utils.c (quoted_encode_step): Actually count the
	characters output sofar (it never counted any).  Bunch of other
	fixes.
	(quoted_encode_close): Also flush out final character, if there's
	one.

2000-07-12  Jeffrey Stedfast  <fejj@helixcode.com>

	Chris forgot to add #include <e-util/e-util.h> to the source files
	
	* providers/imap/camel-imap-store.c (imap_connect): Fixed Peter's 
	fix, we don't want to send a string to a %d.

2000-07-12  Christopher James Lahey  <clahey@helixcode.com>

	* camel-folder-search.c, providers/imap/camel-imap-store.c:
	Changed from strstrcase to e_strstrcase.

	* string-utils.c, string-utils.h: Removed strstrcase (in favor of
	e_strstrcase in e-util/e-util.c.)

2000-07-12  Chris Toshok  <toshok@helixcode.com>

	* providers/nntp/camel-nntp-folder.c
	(nntp_folder_set_message_flags): get the article num out of our
	uid and mark it read in the newsrc.
	(nntp_folder_get_message): get the message id out of the uid to
	fetch the article.

	* providers/nntp/camel-nntp-utils.c (get_XOVER_headers): the uid
	is now <article-num>,<messageid>
	(get_HEAD_headers): same.

	* camel-mime-parser.c (folder_scan_step): go to HSCAN_MESSAGE
	state when ct->subtype is "news" as well as "rfc822".  this makes
	attachments of type "message/news" display properly.

2000-07-12  Dan Winship  <danw@helixcode.com>

	* camel-folder.c (camel_folder_free_deep,
	camel_folder_free_shallow, camel_folder_free_nop): Useful default
	implementations for free_{uids,subfolder_names,summary}.
	(free_subfolder_names, free_uids): Make these g_warning-ing
	default implementations.

	* providers/*/camel-*-folder.c: Use the new functions where
	appropriate, remove duplicated code.

2000-07-12  Peter Williams  <peterw@helixcode.com>

	* providers/imap/camel-imap-store.c (query_auth_types): Check for
	NULL parameters when setting the exception so as to not crash on
	Solaris (can't handle a %s passed NULL).
	(imap_connect): Same.
	
2000-07-12  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/mbox/camel-mbox-folder.c (mbox_delete_message): Use
	mbox_set_message_flags () instead of setting the flags by hand. This
	fixes the problem of the "message_changed" signal not being emitted
	at the correct time.

	* providers/imap/camel-imap-folder.c: "folder_changed" signals should
	pass a third argument (which is ignored).

	* camel-folder.c: Undo gtk signal emits done in set_flags and 
	expunge.
	(move_message_to): 
	(copy_message_to): Create info as a const CamelMessageInfo

2000-07-12  Chris Toshok  <toshok@helixcode.com>

	* providers/nntp/Makefile.am: don't add test-newsrc to the build
	since it needs libcamel (which isn't built at the time test-newsrc
	needs linking.)

	* providers/nntp/camel-nntp-utils.c (get_HEAD_headers): fill in
	MessageInfo->message_id.
	(get_XOVER_headers): same.

	* providers/nntp/camel-nntp-folder.c (nntp_folder_init): move
	summary loading here.
	(nntp_folder_sync): summary/newsrc changes should be stored here.
	put a comment to that effect.
	(nntp_folder_set_message_flags): don't save the newsrc here.
	(nntp_folder_get_uids): use g_ptr_array_index instead of the
	cast/addition.
	(nntp_folder_get_summary): no need to check if we should generate
	the summary here.  already done.
	(nntp_folder_get_message_info): implement.

	* providers/nntp/camel-nntp-store.c
	(camel_nntp_store_get_toplevel_dir): use evolution_dir instead of
	computing it ourselves.
	(nntp_store_disconnect): call camel_nntp_newsrc_write.
	(ensure_news_dir_exists): new function to create the news/<news
	server> subdir.
	(camel_nntp_store_class_init): hook up connect/disconnect and
	finalize.
	(nntp_store_connect): if ensure_news_dir_exists fails throw an
	exception.

2000-07-12  Peter Williams  <peterw@helixcode.com>

	* camel-folder.c (camel_folder_set_message_flags): Emit a message_changed
	signal once the flags are set on the message.
	(camel_folder_set_user_flag): Ditto.
	(camel_folder_expunge): Emit a folder_changed if no exception.

2000-07-12  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-stream.c: Use size_t and ssize_t for read/write methods
	
	* providers/imap/camel-imap-folder.c (imap_set_message_flags): 
	Updated to emit the message_changed signal.
	(imap_delete_message): Updated to use imap_set_message_flags ().
	(imap_move_message_to): Updated to use imap_set_message_flags ()
	and to emit the folder_changed signal on the destination folder.
	(imap_copy_message_to): Updated to emit the folder_changed signal 
	on the destination folder.
	(imap_append_message): Updated to emit the folder_changed signal 
	on the destination folder.

2000-07-11  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-folder.c (camel_folder_append_message): Now takes a
	flags argument to specify the flags to be set on the message
	since we might not necessarily want the flags to be wiped clean.
	(move_message_to):
	(copy_message_to): Updated to send a flags argument to 
	append_message (); currently sends the original message's flags.

	* providers/mbox/camel-mbox-folder.c (mbox_append_message): 
	* providers/imap/camel-imap-folder.c (imap_append_message): 
	Updated.

2000-07-11  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_search_by_expression): 
	This shouldn't return NULL, it should return g_ptr_array_new ()
	so the mailer gets what it expects.

2000-07-10  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-folder-summary.c (camel_folder_summary_decode_string): 
	Oops, an unsigned integer can never be < 0

2000-07-10  Dan Winship  <danw@helixcode.com>

	* providers/vee/camel-vee-folder.c (vee_search_by_expression):
	Initialize a variable to make this not crash again. And fix a bug
	so it actually does something.

2000-07-10  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-folder-summary.c: Cleaned up a bunch of compile warnings

2000-07-10  Dan Winship  <danw@helixcode.com>

	* providers/vee: kill more debugging messages

2000-07-10  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/mbox/camel-mbox-folder.c (mbox_get_unread_message_count): 
	* providers/vee/camel-vee-folder.c (vee_get_unread_message_count): 
	* providers/imap/camel-imap-folder.c (imap_get_unread_message_count):
	Implemented.

	* camel-folder.c (camel_folder_get_unread_message_count): New
	convenience function to allow the mailer to query the number
	of unread messages in a folder (for displaying message stats
	in a folder tree?).

2000-07-09  Dan Winship  <danw@helixcode.com>

	* camel-mime-utils.c (header_references_dup): New function to copy
	a header_references structure.

	* camel-folder-summary.c (camel_message_info_dup_to): New function
	to (deep) copy the data from one CamelMessageInfo into another.
	(camel_message_info_free): And free the data.

	* providers/vee/camel-vee-folder.c (vee_sync): Implement. (empty).
	(vee_search_by_expression): belatedly update for
	camel_folder_search change.
	(vee_folder_build): belatedly update for camel_folder_search
	change. Use camel_message_info_dup_to and camel_message_info_free
	(in particular, so that we get message_id and references info so
	vfolders can be threaded).
	(vee_folder_build_folder): Ditto.

2000-07-08  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/nntp/camel-nntp-folder.c: 
	* providers/nntp/camel-nntp-utils.c: 
	* providers/nntp/camel-nntp-store.c: Update to reflect past changes
	in the Camel API. Use gtk macro casts wherever possible and use glib's
	memory functions instead of standard c's (since they are not 
	compatable)

	* providers/smtp/camel-smtp-transport.c: 
	* providers/imap/camel-imap-store.c: Wrap debug print statements
	in a macro

	* providers/imap/camel-imap-stream.c (stream_read): Make sure
	that we get up to and including the last \n of the mime part.

	* providers/imap/camel-imap-folder.c (imap_get_message): Make sure
	that we get up to and including the last \n of the mime part.
	Wrap debug print statements in a macro.

	* providers/imap/camel-imap-stream.c (stream_read): Only cache
	the important data (aka the mime part requested and no extra
	server response stuff)

2000-07-07  Dan Winship  <danw@helixcode.com>

	* camel-mime-utils.c (header_references_decode): Work around
	In-Reply-To's with unquoted punctuation. So many broken mailers.

	* camel-folder.c (camel_folder_search_by_expression): Make this
	return a GPtrArray rather than a GList.

	* camel-folder-search.c (camel_folder_search_execute_expression):
	* providers/imap/camel-imap-folder.c (imap_search_by_expression):
	* providers/mbox/camel-mbox-folder.c (mbox_search_by_expression):
	* providers/nntp/camel-nntp-folder.c (nntp_search_by_expression):
	Update to return a GPtrArray rather than a GList.

2000-07-07  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/smtp/camel-smtp-transport.c (esmtp_get_authtypes): 
	Fixed the parser to actually work

2000-07-06  Dan Winship  <danw@helixcode.com>

	* camel-mime-utils.c (header_references_decode): Make this deal
	with the full RFC822 References/In-Reply-To format rather than
	just the more-nicely-behaved RFC1036 version. (Needed to parse
	In-Reply-To headers with extra junk in them.)

2000-07-06  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_summary): Parse for
	more header information to allow message threading in IMAP.
	(imap_get_message_info): Same.

	* camel-folder-summary.c: Renamed summary_format_* to
	camel_summary_format_* and moved them into public scope.

	* providers/smtp/camel-smtp-transport.c (smtp_connect): Oops. Don't
	pass port # as a string in the error code (if it fails to connect).

	* providers/imap/camel-imap-folder.c (imap_append_message): Changed
	over to camel_imap_command_extended as that was the source of the
	problems - apparently appending replies with more than just 1 line.

2000-07-05  Dan Winship  <danw@helixcode.com>

	* camel-folder-search.c (search_header_contains): make header
	matching case-insensitive

	* camel-folder-summary.c:
	* camel-session.c:
	* providers/mbox/camel-mbox-folder.c:
	* providers/mbox/camel-mbox-summary.c: Remove some non-error case
	debugging-type messages.

2000-07-05  Ettore Perazzoli  <ettore@helixcode.com>

	* providers/mbox/camel-mbox-summary.c (d): Define to empty so that
	we get rid of a ton of debugging messages.

2000-07-05  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-mime-utils.h: Added prototype for uudecode_step

	* camel-mime-utils.c (uudecode_step): Cleaned up some junk that
	should have been cleaned up when debugging printf's were taken out.

2000-07-05  Ettore Perazzoli  <ettore@helixcode.com>

	* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_sync):
	Update the X-Evolution: header even if the in-memory UID and the
	saved UID are not the same.  Otherwise mboxes with clashing UIDs
	can never be fixed.

	* camel-folder-summary.c
	(camel_folder_summary_add_from_parser): Add the message to the
	summary before doing any ibex stuff.  In fact, this might also
	have the side effect of reassigning the UID so it needs to be done
	before we start using the UID.

	* providers/mbox/camel-mbox-folder.c (mbox_append_message): Add
	debugging message to keep track of the UIDs we add.

2000-07-05  Dan Winship  <danw@helixcode.com>

	* camel-folder-summary.c: Add "Cc" to summary and bump summary
	version number.

	* camel-folder-search.c (search_header_contains): make "Cc" a
	searchable header.

2000-07-03  Ettore Perazzoli  <ettore@helixcode.com>

	* camel-folder-summary.c (camel_folder_summary_next_uid_string):
	New.
	(camel_folder_summary_add): Use
	`camel_folder_summary_next_uid_string()' instead of recomputing
	the UID manually here.
	(camel_folder_summary_add_from_parser): Likewise.

2000-07-03  Ettore Perazzoli  <ettore@helixcode.com>

	* camel-folder-summary.c (camel_folder_summary_set_uid): Removed.

2000-07-03  Dan Winship  <danw@helixcode.com>

	* camel-folder-summary.c (message_info_new): Parse In-Reply-To
	with header_references_decode, not header_msgid_decode.

	* camel-mime-message.c (camel_mime_message_class_init): message
	headers are case-insensitive.

	* providers/pop3/camel-pop3-store.c (camel_pop3_command): Fix a
	bug in error-setting code.
	(pop3_connect): Don't re-prompt for password in the KPOP case.
	(pop3_get_response): New function, split out from
	camel_pop3_command.
	(connect_to_server): Use pop3_get_response to parse the greeting
	message, and error out appropriately if it's -ERR.

2000-07-02  Dan Winship  <danw@helixcode.com>

	* camel-folder.c (camel_folder_freeze, camel_folder_thaw): New
	functions to freeze and thaw a folder (to prevent message/folder
	changed signals in the middle of a long series of operations).
	(camel_folder_class_init): Change signals to GTK_RUN_FIRST.
	(message_changed, folder_changed): Add default implementations
	that stop the emission and record info for later if the folder is
	frozen.

	* providers/mbox/camel-mbox-folder.c (mbox_sync): leftover fixes
	from the close->sync change: don't destroy the ibex, summary, and
	search when syncing.
	(append_message): emit "folder_changed" on a successful append.

2000-07-02  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-mime-utils.c (uudecode_step): A rather complex uudecoder
	written in the spirit of Zucchi-ness, is it up to par? Only the 
	Z-man can tell us :-)

2000-07-01  Dan Winship  <danw@helixcode.com>

	* camel-service.c (camel_service_get_name): New method, to return
	an end-user-friendly name corresponding to a service. (eg, "POP
	service for danw on trna.helixcode.com").

	* providers/imap/camel-imap-store.c,
	providers/mbox/camel-mbox-store.c,
	providers/nntp/camel-nntp-store.c,
	providers/pop3/camel-pop3-store.c,
	providers/sendmail/camel-sendmail-transport.c,
	providers/smtp/camel-smtp-transport.c: Implement.

	* providers/imap/Makefile.am: remove unneeded
	libcamelimap_la_LDADD.

	* providers/pop3/camel-pop3-store.c (connect_to_server): fix the
	CAPA-parsing code to not get into an infinite loop.

2000-07-01  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_message): Fixed
	the bug that would sometimes leave part of the server response
	tacked on to the end of the message.

	* camel-folder.c: Renamed _by_uid methods. Since we no longer
	have get-by-number methods, no need to have the _by_uid 
	extensions. 
	(get_message_by_uid): Renamed to get_message
	(delete_message_by_uid): Renamed to delete_message
	(summary_get_by_uid): Renamed to get_message_info

	* providers/mbox/camel-mbox-folder.c: 
	* providers/pop3/camel-pop3-folder.c:
	* providers/imap/camel-imap-folder.c:
	* providers/vee/camel-vee-folder.c: Updated to reflect
	camel-folder changes.

2000-06-30  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-folder.c (camel_folder_copy_message_to): New function, to
	copy a message from one folder to another. The default
	implementation just uses append_message, but providers can 
	implement more efficient versions for use when both folders are on 
	the same store.

	* broken-date-parser.[c,h]: Utilities for parsing broken
	date strings.
	
	* providers/imap/camel-imap-folder.c (imap_move_message_to): 
	(imap_copy_message_to): Implemented.

	* camel-mime-utils.c (header_decode_date): Wrote some code to try
	and un-mangle broken date formats and then parse that new string 
	instead.

2000-06-30  Dan Winship  <danw@helixcode.com>

	* camel-folder.c (camel_folder_move_message_to): New function, to
	move a message from one folder to another. The default
	implementation just uses append_message and delete_message, but
	providers can implement more efficient versions for use when both
	folders are on the same store.

2000-06-29  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_expunge): Should now
	print a meaningful error message when it doesn't succeed

2000-06-28  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (imap_connect): Changed to
	keep prompting user for a valid password until it either
	authenticates or until Canceled by the user.
	(camel_imap_command_extended): Improved speed (replaced the
	g_strjoinv call with a faster implementation)

	* providers/pop3/camel-pop3-store.c 
	(camel_pop3_command_get_additional_data): Fixed.
	(pop3_connect): Changed to keep prompting the user for a
	password until it either works or until Canceled by the user.

	* providers/mbox/camel-mbox-summary.c: General cleanup
	(camel_mbox_summary_sync): Fixed a memory leak and added
	CamelException handling.

	* providers/mbox/camel-mbox-store.c (delete_folder): Fixed a 
	memory leak

	* providers/mbox/camel-mbox-folder.c (mbox_append_message): 
	Default 'off_t seek' to -1 so as to make sure it's initialized
	before it's used in the case of a bad stat() call.
	(mbox_sync): Updated
	(mbox_expunge): Updated

2000-06-27  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (imap_connect): Move the 
	CAPABILITY command here so we don't have to keep checking
	each time we open a folder.
	(camel_imap_command_extended): If we are doing an EXAMINE,
	don't bother doing a SELECT first.

	* providers/imap/camel-imap-folder.c (imap_init): Update so
	folder->has_search_capability depends on the parent IMAP store
	(since this is really dependant on the IMAP implementation and
	not the folder)

2000-06-27  Christopher James Lahey  <clahey@helixcode.com>

	* providers/smtp/camel-smtp-transport.c: Don't close the filter
	stream when done with it (this causes the source stream to close);
	Instead, just flush it when done.

2000-06-27  Michael Zucchi  <zucchi@zedzone.mmc.com.au>

	* camel-folder-search.c (search_header_contains): Make header
	search 'to' match 'to', and not 'from', small typo, fixes #317.

2000-06-26  Christopher James Lahey  <clahey@helixcode.com>

	* providers/mbox/camel-mbox-summary.c: Added debugging
	information.

2000-06-23  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c: 
	* providers/imap/camel-imap-folder.c: Improved folder parsing.
	Not specifying a namespace should no longer list the entire
	filesystem.

2000-06-22  Chris Toshok  <toshok@helixcode.com>

	* providers/nntp/.cvsignore: ignore test-newsrc

	* providers/nntp/camel-nntp-store.c,
	providers/nntp/camel-nntp-store.h,
	providers/nntp/camel-nntp-folder.c,
	providers/nntp/camel-nntp-folder.h,
	providers/nntp/camel-nntp-utils.c: Bring the nntp provider up to a
	state where it builds and is usable with the current camel.  there
	are still warts (semi-broken .newsrc file handling, and a lack of
	a subscribe ui -- in fact no way to add a new server, really), but
	it'll display news messages.

	* providers/nntp/Makefile.am (libcamelnntp_la_SOURCES): add
	camel-nntp-newsrc.c
	(libcamelnntpinclude_HEADERS): add camel-nntp-newsrc.h
	also, add test-newsrc stuff.
	
	* providers/nntp/test-newsrc.c: new file that tests the newsrc
	stuff by parsing and regurgitating a .newsrc file for a particular
	server.

	* providers/nntp/camel-nntp-newsrc.c,
	providers/nntp/camel-nntp-newsrc.h: new files, initial support for .newsrc files.

2000-06-22  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_message_count): 
	Oops. Now appends the namespace to the folder before querying
	for the number of messages.

	* providers/imap/camel-imap-store.c (imap_folder_exists): New
	convenience function for use by imap_create().
	(get_folder): If folder is specified as "/", we really want
	"INBOX".

	* providers/sendmail/camel-sendmail-provider.c:
	* providers/vee/camel-vee-provider.c:
	* providers/smtp/camel-smtp-provider.c:
	* providers/mbox/camel-mbox-provider.c:
	* providers/pop3/camel-pop3-provider.c:
	* providers/imap/camel-imap-provider.c: Updated
	
	* camel-session.c: Moved service_cache hash table into the
	providers.
	(service_cache_remove): Updated.
	(camel_session_get_service): Updated.

	* camel-url.c (camel_url_hash): Took out the hashing of
	url->passwd. We don't want this anymore.

	* providers/imap/camel-imap-folder.c (imap_init): Took out
	references to 'namespace'
	(camel_imap_folder_init): Same

	* providers/imap/camel-imap-folder.h: No more namespace. We are
	instead going to use url->path as the namespace.

2000-06-21  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (imap_create): Modified to
	use the "namespace" (url->path) if it exists.

	* providers/imap/camel-imap-folder.c (imap_delete_message_by_uid):
	Now just sets the deleted flag on the summary rather than speaking 
	directly to the IMAP server. This is both faster and cleaner.

2000-06-21  Dan Winship  <danw@helixcode.com>

	* providers/pop3/camel-pop3-store.c (query_auth_types): Fix dumb
	bug.

2000-06-21  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_message_by_uid): 
	We are getting mail in IMAP now!! whoo-hoo!. Stripped out the 
	filtering so messages may have some dot-stuffing, but the 
	filtering can always be added back in later when we know it 
	works and isn't the problem.

2000-06-21  Peter Williams  <peterw@curious-george.helixcode.com>

	* providers/mbox/camel-mbox-folder.c (mbox_init): Use the basename
	of the mailbox so we don't get pathnames like ~/evolution/inbox///movemail.ibex

2000-06-21  Dan Winship  <danw@helixcode.com>

	* camel-folder-summary.c (message_info_new): Set date_received
	based on the first (most recent) "Received" header.

2000-06-20  Dan Winship  <danw@helixcode.com>

	* camel-mime-part.c (write_to_stream): flush the filter stream
	before unreffing it, so it will camel_mime_filter_complete.

	* camel-stream-filter.c (camel_stream_filter_class_init): Fix a
	braino so camel_stream_flush works here.

	* camel-stream-mem.c (stream_seek): Fix a bug that resulted in
	large attachments being silently dropped.

	* providers/pop3/camel-pop3-store.c
	(camel_pop3_command_get_additional_data): Don't use g_strjoinv
	here, since it is O(n^2) on the length of the output string, and
	we can do O(n).

	* camel-mime-part-utils.c
	(simple_data_wrapper_construct_from_parser): add a CRLF decoder
	after the QP/B64 decoder if it's text.

2000-06-20  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_summary): Only
	fetch the summary if the folder summary doesn't already exist.
	When the summary *does* exist, start fetching from 1, not 0.
	(imap_free_summary): Don't do anything here.
	(imap_finalize): Free the summary here instead of in
	imap_free_summary().
	(imap_set_message_flags): Implemented
	(imap_sync): Added code to set flags on messages that have had
	their flags changed (however I #if'd it out until we are more
	confidant in the IMAP code :)
	(imap_summary_get_by_uid): Now parese flags correctly.
	(imap_get_summary): Now parese flags correctly. Also correctly
	parses the UID correctly.

	* camel-url.c (check_equal): No need to check s1 if s2 is NULL
	(camel_url_equal): Don't check the passwd component of the url.

2000-06-20  Dan Winship  <danw@helixcode.com>

	* camel-folder-summary.c (camel_folder_summary_add): mark the
	message info with CAMEL_MESSAGE_FOLDER_FLAGGED if we change the
	uid, so the folder will know that it's dirty.

2000-06-20  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (camel_imap_command_extended): 
	Now returns the last line of data that the server sends back as
	well. This is needed for commands like SELECT (like Peter pointed
	out).
	(camel_imap_command): No longer checks for SELECT (no need)

	* providers/imap/camel-imap-folder.c: Added namespace stuff
	which we will need later on...
	(imap_parse_subfolder_line): Convenience function for use in
	get_subfolder_names()
	(imap_get_subfolder_names): Updated. Also changed it to use LIST
	instead of LSUB (temporary change).

2000-06-19  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (camel_imap_folder_init): Set
	summary equal to NULL.
	(imap_get_summary): Store the summary in the ImapFolder
	(imap_summary_get_by_uid): If we have a summary cache in the
	ImapFolder, first check to see if that message info is in the
	cached summary first, if not fetch it directly from the IMAP
	server and append it to the summary cache.
	(imap_get_message_flags): Don't free the message info that we get
	back from summary_get_by_uid as we don't want to be corrupting our
	cached summary.

2000-06-19  Peter Williams  <peterw@curious-george.helixcode.com>

	* providers/imap/camel-imap-store.c (camel_imap_command{,_extended}): When
	SELECT'ing a folder for an IMAP command, use _extended to grab the entire
	response (before we just used camel_imap_command and missed the OK codes)

2000-06-18  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_summary_get_by_uid): 
	Now gets the message flags as it should.
	(imap_get_summary): Same as imap_summary_get_by_uid
	(imap_get_permanent_flags): Return the permanent flags stored
	on the folder.
	(imap_get_message_flags): Return message flags associated with
	given uid. Note: we may want to somehow cache summary info so
	that we don't have to keep querying the IMAP provider in
	imap_summary_get_by_uid().

2000-06-17  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_free_summary): We were
	leaking memory - but not anymore!
	(imap_get_summary): We now get the UIDs and the beginnings of the
	code to get the message flags as well.

2000-06-17  Dan Winship  <danw@helixcode.com>

	* camel-mime-parser.c (folder_scan_header): Don't copy newlines
	into the parsed header text, and turn any number of tabs and
	spaces after a newline into a single space.

2000-06-17  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_init): Should now
	correctly do CAPABILITY.

2000-06-17  Dan Winship  <danw@helixcode.com>

	* providers/mbox/camel-mbox-summary.c: Add some debugging printfs
	when rebulding summary to help figure out why people's summaries
	are always being rebuilt.

2000-06-17  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_search_by_expression):
	Began to implement, need to get information on how to
	deconstruct @expression into an IMAP search expression and
	parse the results.
	(imap_init): Now queries the IMAP provider for CAPABILITY to
	determine if SEARCH is implemented or not.

	* providers/imap/imap.c: Removed - no longer a need to have
	this as an example for anyone interesting to help mecode IMAP
	support.
	
2000-06-16  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_sync): Added code
	to expunge if called for (still need to finish coding this).
	(imap_get_uids): Implemented.
	(imap_get_summary): Found a way to get the date
	(imap_summary_get_by_uid): Same.
	(imap_free_summary): Implemented.

	* string-utils.c (strstrcase): Fixed a compile warning

	* providers/imap/camel-imap-summary.c: Removed - we don't
	need a CamelImapSummary structure.

2000-06-16  Dan Winship  <danw@helixcode.com>

	Move flag handling from CamelMimeMessage to CamelFolder. This
	simplifies several flag-handling pieces of code in the mailer, and
	lets you change a message's flags without having to fetch the
	message body. It also means that fully-constructed
	CamelMimeMessages are now essentially constant, which will help
	simplify locking issues later since it means two threads
	interested in the same message can just work with separate copies
	of it.

	* camel-mime-message.h (struct _CamelMimeMessage): Removed flags
	and user_flags (moved to summary). Removed expunged and
	message_number which were unused. Removed message_uid and folder
	which are no longer needed in the new scheme.
	(struct CamelMimeMessageClass): Removed message_changed signal and
	get/set_message_number methods.

	* camel-mime-message.c: Updates for CamelMimeMessage changes.
	(camel_mime_message_get/set_flags,
	camel_mime_message_get/set_user_flag): Replaced with methods in
	CamelFolder.
	(camel_flag_get, camel_flag_set, camel_flag_list_size,
	camel_flag_list_free): Moved verbatim to camel-folder-summary.c
	
	* camel-folder.c (camel_folder_get/set_message_flags,
	camel_folder_get/set_message_user_flag): New methods (and
	corresponding useless default implementations)
	(camel_folder_class_init): add a message_changed signal

	* camel-folder-summary.c (camel_flag_get, camel_flag_set,
	camel_flag_list_size, camel_flag_list_free): Moved here from
	camel-mime-message.c

	* providers/mbox/camel-mbox-folder.c (message_changed): Removed.
	(mbox_get_message_flags, mbox_set_message_flags,
	mbox_get_message_user_flag, mbox_set_message_user_flag): Tweak
	summary bits as appropriate. (Functionality moved here from
	message_changed.)
	(mbox_get_message_by_uid): Update for CamelMimeMessage changes
	(less stuff to initialize).

	* providers/imap/camel-imap-folder.c (message_changed): Remove
	this. It was just copied from the mbox provider and doesn't deal
	with the real IMAP flag stuff anyway. (So there's currently no
	flag support in the IMAP provider.)
	(imap_get_message_by_uid): Update for CamelMimeMessage changes.

	* providers/vee/camel-vee-folder.c: (message_changed): Remove old
	one. Add a new one to listen for message_changed on each folder
	and re-emit message_changed signals that correspond to messages in
	the vfolder.
	(vee_get/set_message_flags, vee_get/set_message_user_flag): Proxy
	flag setting to the underlying real messages.
	(vee_append_message): Removed for now; there's no way to translate
	this into the new CamelMimeMessage/CamelFolder scheme, but (a)
	there's also no code which would ever call it and (b) we're
	probably going want a better interface than append_message for
	message drag and drop to work anyway. To be revisited.

2000-06-16  Dan Winship  <danw@helixcode.com>

	* camel-mime-utils.c (rfc2047_decode_word): 
	* camel-mime-part-utils.c (simple_data_wrapper_construct_from_parser): 
	* camel-folder-summary.c (summary_build_content_info): 
	KLUDGE! Since neither ETable nor GtkHTML supports UTF-8 yet,
	output ISO-8859-1 instead, so Ettore can read his Italian mail. :)
	This will be reverted later.

2000-06-15  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_summary): Started to 
	implement - may want to use ENVELOPE instead of BODY.PEEK[HEADER]
	(imap_summary_get_by_uid): Started to code, I've got to find a way to 
	get the date in time_t format and also get the flags

	* string-utils.c (strstrcase): Added this convenience function - I
	know about strcasestr() but it's not portable.

2000-06-15  Dan Winship  <danw@helixcode.com>

	* camel-service.c: Remove camel_service_connect_with_url. (URLs
	must be specified when the service is requested from the session,
	so that there can only ever be one service for any URL.)

	* camel-folder.c: (camel_folder_open, camel_folder_is_open,
	camel_folder_get_mode): Kill. Folders are now always open, and
	handle "closing" sorts of operations at sync or finalize time.
	(camel_folder_sync): renamed from camel_folder_close. Syncs state
	to the store but doesn't necessarily close/disconnect.

	* providers/*/camel-*-folder.c: Merge "open" methods into "init"
	methods. Rename close to sync and update appropriately.

	* providers/imap/camel-imap-store.c: Remove camel_imap_store_open
	and camel_imap_store_close, which should not have been copied from
	the POP provider (where the exist to work around limitations of
	the POP protocol).

	* providers/mbox/camel-mbox-summary.c: fix a bug. (don't expunge
	deleted messages if called with expunge == FALSE)
	
	* providers/pop3/camel-pop3-store.c (connect_to_server): Check
	server for various interesting extensions.

	* providers/pop3/camel-pop3-folder.c (get_uids): If the server
	supports UIDL, use real UIDs rather than fake ones.
	(etc): Map uids back to numbers appropriately

	* providers/mbox/camel-mbox-folder.c (mbox_append_message): Fix to
	previous change: make sure the "seek" variable ends up with the
	value it should.

	* providers/mbox/camel-mbox-summary.c (summary_rebuild): Update
	summary mtime as well as size.

2000-06-14  Dan Winship  <danw@helixcode.com>

	* providers/mbox/camel-mbox-folder.c (mbox_append_message): if the
	mbox doesn't end with a '\n', write one before appending the new
	message.

2000-06-14  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-mime-filter-crlf.c (filter): Updated the encoder to allocate 
	more memory (since we are also now adding dots). Also updated the
	decoder as we have found that it sometimes passes the end of the 
	buffer.

	* providers/pop3/camel-pop3-folder.c (get_message_by_uid): Took out the
	filter code (we already filter in 
	camel_pop3_command_get_additional_data)

	* camel-folder.c (init): Updated: a separator is now a char* rather 
	than a single char because IMAP can have a string for a directory 
	separator. Also, since IMAP does not begin with a directory separator,
	there is a new argument (path_begins_with_sep) which decides if a 
	directory should begin with a directory separator.

	* providers/imap/camel-imap-store.c (imap_create): Since, on connect,
	Camel tries to create INBOX (which already exists on every IMAP 
	provider) we can return TRUE when the folder name is "INBOX".

	* providers/vee/camel-vee-folder.c (vee_init): Updated.

	* providers/imap/camel-imap-folder.c (camel_imap_folder_new): Updated.

	* providers/mbox/camel-mbox-store.c (get_folder): Updated.

	* providers/mbox/camel-mbox-folder.c (mbox_init): Updated.

	* providers/pop3/camel-pop3-folder.c (camel_pop3_folder_new): Updated.

2000-06-14  Dan Winship  <danw@helixcode.com>

	* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_sync):
	Renamed from camel_mbox_summary_expunge. Takes a gboolean saying
	whether to expunge or just sync the mbox file. Change some
	g_errors to g_warning so we don't abort. Make the quick
	X-Evolution updating code lseek around correctly. Update the
	mbox mtime in the summary file even in the quick case.

	* providers/mbox/camel-mbox-summary.h: make
	CAMEL_MESSAGE_FOLDER_NOXEV not conflict with
	CAMEL_MESSAGE_FOLDER_FLAGGED defined in camel-mime-message.h

	* providers/mbox/camel-mbox-folder.c (mbox_close): call
	camel_mbox_summary_sync to save flag state if not expunging.
	(mbox_expunge): Update for camel_mbox_summary_expunge rename.

2000-06-13  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (camel_imap_store_open): 
	(camel_imap_store_close): Added.
	(camel_imap_command_extended): Fixed a segfault and updated
	to use camel_imap_status()
	(camel_imap_command): Updated to use camel_imap_status()
	(camel_imap_status): New convenience function for parsing
	the return status of an IMAP command

2000-06-12  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c (imap_get_message_by_uid): 
	Works like the POP fetch code, should work temporarily until
	we get around to coding it the way it "Should Be".

	* providers/pop3/camel-pop3-folder.c (get_message_by_uid): Now uses
	the camel-mime-filter-crlf decoder when retrieving messages.

	* camel-mime-filter-smtp.c: Deprecated.

	* providers/smtp/camel-smtp-transport.c (smtp_data): Updated to use
	camel-mime-filter-crlf with my 'dot' extension in place of
	camel-mime-filter-smtp

	* camel-mime-part.c (write_to_stream): Updated to reflect changes
	made to camel-mime-filter-crlf.c

	* camel-mime-filter-crlf.c (filter): Modified to be able to
	encode/decode dots ("\n.\n"<->"\n..\n"). Also fixed the decoder
	so that it should no longer get caught in an infinite loop.

2000-06-12  Dan Winship  <danw@helixcode.com>

	* providers/*/Makefile.am: don't pass a second (incorrect) -rpath
	in addition to the (correct) one automatically provided by
	automake.

	* camel-mime-filter-crlf.c: New filter to do CRLF<->LF conversion.
	(Currently only tested in the LF->CRLF direction.)

	* camel-mime-part.c (write_to_stream): if content-type is text,
	and it's QP or B64 encoded, pass through the CRLF filter before
	the other filter to satisfy the "canonical encoding" rules in the
	MIME spec.

2000-06-09  Dan Winship  <danw@helixcode.com>

	* camel-session.c (camel_session_query_authenticator): Add another
	argument, "mode", which can be CAMEL_AUTHENTICATOR_ASK or
	CAMEL_AUTHENTICATOR_TELL, so callers can get the app to un-cache
	bad info.

	* providers/pop3/camel-pop3-store.c (pop3_connect): uncache the
	password if it doesn't work.

2000-06-09  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-stream.c (stream_read): Updated to reflect
	changes made in camel-imap-store.c

	* providers/imap/camel-imap-store.c (imap_create): No longer checks to
	make sure a folder doesn't already exists (as this is no longer needed)
	(camel_imap_command): Now takes a CamelFolder argument so it can detect
	whether or not it needs to SELECT a folder or not
	(camel_imap_command_extended): Same.

	* providers/smtp/camel-smtp-transport.c (smtp_connect): Will now always
	send EHLO first, if that fails it will fall back on HELO.
	(esmtp_get_authtypes): Should now correctly parse authtypes.

2000-06-07  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-summary.c: Now builds (not that it's worth
	much yet).
	
	* providers/imap/camel-imap-folder.c (imap_get_uids): Now uses the 
	correct cast to a CamelImapMessageInfo structure (should get rid of 
	compile warnings).

	* providers/imap/Makefile.am: Added rules to build 
	camel-imap-stream
	
	* providers/imap/camel-imap-store.c (get_folder): Update.
	Moved imap_create here.

	* providers/imap/camel-imap-folder.c (delete_messages): Remove.
	(imap_create): Removed.
	(imap_delete): Removed.
	(imap_exists): Removed.

	* providers/imap/camel-imap-stream.h: Added typedef's for the stream

	* providers/imap/camel-imap-stream.c: Modified to build cleanly

2000-06-07  Not Zed  <NotZed@HelixCode.com>

	* camel-mime-utils.c (header_msgid_decode_internal): Properly
	dereference warning/debug messages.
	(header_references_decode): Check we actually have msgid stuff
	before trying to decode it ...

2000-06-06  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-imap-stream.[c,h]: Removed

	* providers/imap/camel-imap-stream.[c,h]: Relocated to this
	location

	* providers/imap/camel-imap-summary.c: Added

2000-06-06  Dan Winship  <danw@helixcode.com>

	* camel-folder.c: Remove exists, create, delete. A CamelFolder
	now always references an existing folder. Remove delete_messages
	too since it wasn't being used. Add a "create" flag to
	get_subfolder saying whether or not to create the subfolder if it
	doesn't yet exist.

	* camel-store.c (camel_store_get_folder): Add a "create" flag to
	say whether or not to create the folder if it doesn't yet exist.
	(camel_store_delete_folder): New method, moved from CamelFolder.
	(cache_folder, uncache_folder): Fix up a bit.
	(get_folder_name): Explain what this is for.

	* providers/mbox/camel-mbox-folder.c: 
	* providers/mbox/camel-mbox-store.c: Update. Remove support for
	hierarchical folders to simplify this for now, since we're not
	using it, and it's not completely clear how they should work in an
	ELocalStorage world. Needs to be revisited.

	* providers/pop3/camel-pop3-folder.c (delete_messages): Remove.
	* providers/pop3/camel-pop3-store.c (get_folder): Update.

	* providers/vee/camel-vee-folder.c (exists): Remove.
	* providers/vee/camel-vee-store.c (vee_get_folder): Update.

2000-06-06  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-*.[c,h]: Started on getting 
	imap to build cleanly (tho some work has not been completed
	so it still won't build until camel-imap-summary is finished
	along with a few methods in camel-imap-folder)

	* camel-stream.[c,h]: Changed the read and write method prototypes
	to return an ssize_t type rather than an int and also changed
	the 'number of bytes' to read or write to a size_t type

	* camel-stream-fs.c: same as above

	* camel-stream-mem.c: again, same as above

	* camel-stream-buffer.c: same

	* camel-imap-stream.[c,h]: Added this new stream, cache's previously 
	read data so each successive call will instead read from the cache
	
2000-06-05  Dan Winship  <danw@helixcode.com>

	* camel-mime-part.c (camel_mime_part_set_disposition): fix
	typo/braino (set "Content-Disposition", not "Content-Description")
	(camel_mime_part_set_filename): const poison

2000-06-02  Not Zed  <NotZed@HelixCode.com>

	* camel-mime-utils.c (base64_encode_step): Ick, damn signs!  Fix a
	bug with sign extended bytes.

	* camel-mime-filter-smtp.c (filter): Changed layout/logic slightly
	(to match From filter)

2000-06-02  Jeffrey Stedfast  <fejj@helixcode.com>

	* camel-mime-filter-smtp.c (filter): Fixed the filter so that it 
	wouldn't insert garbage under certain conditions.

2000-06-02  Christopher James Lahey  <clahey@helixcode.com>

	* camel-session.c: Don't ref the services in the cache.

2000-06-02  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/smtp/camel-smtp-transport.c: Rearanged where debug
	fprintf statements we placed so that any data the server sends 
	back is printed out before an exception is set and the function
	returns.

2000-06-02  Not Zed  <NotZed@HelixCode.com>

	* camel-mime-utils.c (header_decode_date): If we get a funny
	result, just throw it out.  Basically a fix for the one true
	broken TradeClient.

2000-06-01  Not Zed  <NotZed@HelixCode.com>

	* camel-folder-summary.c (message_info_free): Free
	references/messsage id.
	(message_info_save): Save them.
	(message_info_load): Load them.
	(message_info_new): And get them from the new message.
	(CAMEL_FOLDER_SUMMARY_VERSION): Bumped for new changes.

	* camel-folder-summary.h: Added references and messageid to
	summary.

2000-06-02  Christopher James Lahey  <clahey@helixcode.com>

	* camel-session.c: Ref and unref objects in the service cache
	properly.

	* camel-store.c: Ref the folder when returning it using
	lookup_folder.  Used the folder's full name for the key for the
	folder cache since that's used to uncache it.

2000-06-02  Dan Winship  <danw@helixcode.com>

	Fun with purify.

	* providers/pop3/camel-pop3-store.c (pop3_connect): free msg on
	success as well as failure.
	(camel_pop3_command_get_additional_data): free buf after reading
	the last line (".").

	* providers/pop3/camel-pop3-folder.c (get_message_by_uid): free
	body data after creating the memstream from it (which will copy
	the data).

	* providers/mbox/camel-mbox-folder.c (mbox_finalize): free summary
	and index paths.

	* camel-data-wrapper.c (finalize): unref the stream, if it exists.

2000-06-01  Not Zed  <NotZed@HelixCode.com>

	* camel-mime-part.c (construct_from_parser): For a message part,
	set the default content-type to message/rfc822.  Maybe needs to be
	done for multiparts too?

2000-05-31  Not Zed  <NotZed@HelixCode.com>

	* camel-mime-message.c (construct_from_parser): Typo in assersion.

	* camel-mime-parser.c (folder_scan_step): Use a default type of
	message/rfc822 for multipart/digest.  Bug Z192.
	(folder_scan_drop_step): Remove warning.

2000-05-30  Not Zed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-folder.c (mbox_append_message): Init
	filter_from to NULL, for exception case.
	(mbox_get_message_by_uid): Cast off_t to long int for diagnostics.

	* camel-url.c (camel_url_hash): Hash funciton for using camel
	url's as hash keys.
	(camel_url_equal): equal function for same.

	* camel-session.c (camel_session_finalise): Free cached services.
	(camel_session_init): Init service cache.
	(service_cache_remove): destroy callback to remove a service from
	the cache.

	* camel-store.c (get_folder_internal): Remove the extra ref of the
	folder.  That seems the right behaviour ...?
	(camel_store_get_type): Doh, actually call store init, so the
	cache works.
	(cache_folder): strdup the folder name!  no wonder it never found
	it again.

2000-05-30  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-folder.c: Implemented a few more
	methods like imap_append and 1 or 2 others

2000-05-29  Not Zed  <NotZed@HelixCode.com>

	* camel-store.c (camel_store_init): Move it to here.  If this
	level is going to maintain it, it should set it up.  Lets see what
	caching folders breaks :(

	* providers/pop3/camel-pop3-store.c (camel_pop3_store_init): Dont
	init folder cache here.

	* providers/mbox/camel-mbox-summary.c
	(camel_mbox_summary_expunge): Make sure we copy messages which are
	still intact to the new folder.
	(camel_mbox_summary_expunge): Update the frompos as well when
	moving the content.
	(camel_mbox_summary_expunge): Remove some debug, and dont offset
	frompos?

	* providers/vee/camel-vee-folder.c (vee_folder_build): Check the
	searched folder is open before trying to search it.
	(message_changed): Track changes to the source message in the
	summary.
	(folder_changed): Track folder changes, re-query the folder that
	changed, and cascade the changed event as well.
	(camel_vee_folder_finalise): Free subfolder and subfolder summary.

2000-05-29  Dan Winship  <danw@helixcode.com>

	* camel-service.c (camel_service_new): Fix up some glib
	precondition stuff. Try to set the URL in camel_service_new before
	checking whether or not it's "empty" so that you can successfully
	set "sendmail:" as a URL.

2000-05-28  Dan Winship  <danw@helixcode.com>

	* camel-provider.h: Add a domain field to CamelProvider, to say
	what kind of data it provides.

	* providers/imap/camel-imap-provider.c: 
	* providers/mbox/camel-mbox-provider.c: 
	* providers/pop3/camel-pop3-provider.c: 
	* providers/sendmail/camel-sendmail-provider.c: 
	* providers/smtp/camel-smtp-provider.c: Set domain to "mail".

	* providers/nntp/camel-nntp-provider.c: Set domain to "news".

	* providers/vee/camel-vee-provider.c: Set domain to "vfolder". (So
	it doesn't end up being listed as a potential mail source in the
	mail config wizard.)

	* providers/pop3/camel-pop3-store.c: Split apart password and APOP
	auth, since some servers seem to do both, but don't really.
	(connect_to_server): Renamed from try_connect. Now actually does
	the connection up to the point of checking the greeting for APOP
	support.
	(query_auth_types): Return APOP, if appropriate. Call
	pop3_disconnect after connect_to_server since we don't really want
	to be connected.
	(pop3_connect): Use connect_to_server rather than duplicating
	code. Fix a one-byte buffer overrun in the APOP code.
	(pop3_disconnect): Make this able to clean up after a partial
	connect.
	(connect_to_server): Remove port number from error message since
	it's not terribly useful and we were getting it from the wrong
	place anyway.

	* camel-mime-utils.c (header_address_list_format_append): Use
	`foo@bar' rather than `"" <foo@bar>' for email addresses with no
	name component.

2000-05-27  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c: Removed 
	camel_imap_command_get_additional_data() as it was
	completely useless, replaced with 
	camel_imap_command_extended() which may eventually replace
	camel_imap_command() as well.

	* providers/imap/camel-imap-store.h: Modified to reflect
	changes made to camel-imap-store.c

	* providers/imap/camel-imap-folder.c: Wrote the first of many
	methods: camel_imap_init(), imap_open(), imap_expunge(), 
	imap_get_message_count(), and imap_get_subfolder_names()

2000-05-26  Dan Winship  <danw@helixcode.com>

	* camel-multipart.c (camel_multipart_init): Don't set a default
	boundary. Require the caller to do that.
	(set_boundary): if boundary is NULL, generate a "random" boundary.

	* camel-mime-part-utils.c
	(camel_mime_part_construct_content_from_parser): Add a call to
	camel_multipart_set_boundary after creating a new multipart.

2000-05-25  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap/camel-imap-store.c (try_connect): Removed
	Exception code - Pop doesn't seem to set exceptions

	* providers/imap/camel-imap-folder.c: Initial code, mostly
	just a template for future code

	* providers/imap/imap.[c,h]: Source code from my personal
	mailer - for reference only!

2000-05-25  NotZed  <NotZed@HelixCode.com>

	* camel-mime-part-utils.c
	(camel_mime_part_construct_content_from_parser): Replace simple
	data wrapper here too, oops.

	* Makefile.am (libcamel_la_SOURCES): Removed
	camel-simple-data-wrapper again.  Less code to maintain == better
	code.
	
	* camel-data-wrapper.c (construct_from_stream): Fixes for bug
	where text attachments dont work.  Made data-wrapper concrete for
	the second time.

2000-05-23  NotZed  <NotZed@HelixCode.com>

	* providers/vee/camel-vee-folder.c (vee_folder_build_folder):
	Update the vfolder details for a single folder.

2000-05-25  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/smtp/camel-smtp-transport.c (_send_to): Took out code
	that had been there to reconnect to the server if it was not
	already connected - Mailer code was fixed so that this should not
	be needed.

	* providers/imap/camel-imap-store.[c,h]: Initial code.

2000-05-24  Dan Winship  <danw@helixcode.com>

	* camel.h: Re-add camel-simple-data-wrapper.h, which was removed
	for some reason.

2000-05-24  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/smtp/camel-smtp-transport.[c,h]: Moved global
	variables into struct CamelSmtpTransport to make SMTP
	thread-safe

	* providers/imap/camel-imap-*.h: Stolen from Mbox. Rough structure
	for Imap.
	
2000-05-23  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/imap: Added some initial code to the camel tree
	for IMAPv4

	* providers/imap/.cvsignore: Added to repository

	* providers/smtp/camel-smtp-transport.c: Added debug fprintf's
	so that testers can provide more information. Tested with simple
	messages and a reply to the hello@helixcode.com default message
	but should really be tested more.
	(smtp_data): Fixed to use data_wrapper_write_to_stream.

	* camel-mime-filter-smtp.c (filter): Modified to escape all lines
	beginning with a '.' and to place a \r before each \n if one did
	not previously exist. Removed code to escape "From " as it was
	found to not be needed for SMTP.

2000-05-22  Jeffrey Stedfast  <fejj@helixcode.com>

	* providers/smtp/camel-smtp-transport.c (smtp_data): Fixed the 
	filtered stream. Fixes for stream changes, updated to use 
	camel-mime-filter-smtp.

	* Makefile.am: Added camel-mime-filter-smtp.c
	
	* camel-mime-filter-smtp.[c,h]: Added to camel tree
	Smtp filter used to change \n into \r\n, escape lone dots,
	and escape "From "'s.

2000-05-19  NotZed  <NotZed@HelixCode.com>

	* camel-simple-data-wrapper.c (construct_from_stream): If we
	already have been constructed, unref our content.
	(write_to_stream): Check we've been constructued, and change for
	stream api changes.

	* camel-mime-parser.c: Removed exception stuff.

	* md5-utils.c (md5_get_digest_from_stream): repaired.

	* camel-mime-message.c: Remove exception from write_to_stream, and
	fix, and fix formatting.

	* providers/sendmail/camel-sendmail-transport.c (_send_internal):
	Fix for stream changes.

	* providers/pop3/camel-pop3-store.c (camel_pop3_command): Fixes
	for stream changes.

	* providers/mbox/camel-mbox-folder.c, and elsewhere, fix all
	stream api changes.
	(mbox_append_message): Use stream_close() now its back.
	(mbox_append_message): unref the from filter.

	* camel-stream-mem.c: And here.

	* camel-stream-fs.[ch]: Here too.

	* camel-stream-filter.c: Likewise.  This is getting tedious.

	* camel-stream-buffer.c (stream_write): Fix a few little problems.
	(stream_close): Reimplement.
	(camel_stream_buffer_read_line): Slightly more efficient version,
	that also only allocates the right amount of memory for strings.

	* camel-seekable-substream.c: Likewise.

	* camel-seekable-stream.[ch]: Remove exceptions, fix formatting,
	changes for stream (re)fixes.  set_bounds returns an error.

	* camel-stream.[ch]: Remove exceptions.  Make flush and reset return
	an error code, repair all the screwed up formatting, and put back
	close.

	* camel-mime-part-utils.c
	(camel_mime_part_construct_content_from_parser): And here.

	* camel-mime-part.c (camel_mime_part_set_content): And this too.
	(write_to_stream): Fixed for stream changes.

	* camel.h: Fixed.

	* providers/vee/camel-vee-folder.c (vee_search_by_expression):
	Implement.  Performs an intersection of the two searches.
	(camel_vee_folder_finalise): Unref search folders.
	(vee_append_message): Implement append.

2000-05-18  Dan Winship  <danw@helixcode.com>

	* camel-folder.c: remove message_number_capability and require uid
	capatibility.
	(camel_folder_list_subfolders, camel_folder_get_uid_list,
	camel_folder_get_subfolder_info, camel_folder_get_message_info):
	removed
	(camel_folder_get_subfolder_names,
	camel_folder_free_subfolder_names): new subfolder interfaces.
	(camel_folder_get_uids, camel_folder_free_uids): new uid
	interfaces
	(camel_folder_get_summary, camel_folder_free_summary): new summary
	interfaces

	* providers/mbox/camel-mbox-folder.c,
	* providers/nntp/camel-nntp-folder.c:
	* providers/vee/camel-vee-folder.c: Update for changes

	* providers/pop3/camel-pop3-folder.c: Implement get_uids, update
	for other changes.

2000-05-18  NotZed  <NotZed@HelixCode.com>

	* providers/vee/camel-vee-folder.c: Guess!

	* camel-folder-search.c (search_user_flag): Implement user_flag
	search term.

	* camel-folder-search.h: Added user_flag search capability
	(user-flag "blah")

	* providers/mbox/camel-mbox-folder.c (mbox_init): Set USER flag in
	permanent flags for the folder.

2000-05-17  Dan Winship  <danw@helixcode.com>

	* camel-folder.c: Remove unused async open/close and
	copy_message_to functions.
	Rename functions without initial _. Fix glib preconditions and
	gtk-doc comments.

2000-05-17  Dan Winship  <danw@helixcode.com>

	* camel-data-wrapper.c: remove get/set_output_stream operations.
	They're redundant with write_to_stream, and CamelMimePart and
	CamelMimeMessage only implement the latter, meaning that trying to
	get_output_stream on a CamelMimeMessage that was built from pieces
	rather than being parsed from a stream doesn't work. Anything that
	uses get_output_stream can be rewritten to use write_to_stream, so
	we'll standardize on that.
	(camel_data_wrapper_new): remove this: CamelDataWrapper is
	supposed to be an abstract class.
	(write_to_stream): remove default implementation. (Moved to
	CamelSimpleDataWrapper)
	
	* camel-simple-data-wrapper.c: resurrect, although it's not really
	the same thing it was before. A simple data wrapper, which is
	backed by a CamelStream.

	* camel-mime-part-utils.c
	(simple_data_wrapper_construct_from_parser): Use
	construct_from_stream rather than set_output_stream.
	(camel_mime_part_construct_content_from_parser): Change
	camel_data_wrapper_new to camel_simple_data_wrapper_new.

	* camel-mime-part.c (camel_mime_part_set_content): Change
	camel_data_wrapper_new to camel_simple_data_wrapper_new.
	

2000-05-17  Darin Adler  <darin@eazel.com>

	* camel-folder-summary.c: (message_info_load):
	Quick fix to get it to compile. I hope I don't get into trouble.

2000-05-17  Dan Winship  <danw@helixcode.com>

	* camel.h: Don't include the no-longer-distributed
	possibly-to-be-removed headers.

	* providers/smtp/camel-smtp-transport.c
	(smtp_get_email_addr_from_text): fix an off-by-one error in
	address parsing
	(smtp_data): use camel_data_wrapper_get_output_stream rather than
	data_wrapper->output_stream

2000-05-17  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-folder.c (message_changed): Snoop
	changes to user flags on the message into the summary as well.

	* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_init):
	Changed version init to include the parent class version info
	(i.e. add it not overwrite it).

	* camel-folder-summary.c (message_info_new): Initialise user_flags
	to empty.
	(message_info_load): And load user flags.
	(message_info_save): And save user flags.
	(message_info_free): And free them.
	(CAMEL_FOLDER_SUMMARY_VERSION): Bumped file revision.

	* camel-folder-summary.h: Added user-flags to summary.

	* camel-mime-message.c (camel_mime_message_set_user_flag): Dont
	use a hashtable for user flags.
	(camel_mime_message_get_user_flag): And changed here too.
	(camel_flag_get): New interface to get a flag from a flag
	list.  Flag lists are easier to work with than hash tables, and
	save memory too.
	(camel_flag_set): And set.
	(camel_flag_list_free): And free.
	(free_key_only): Discard.
	(finalize): Remove the flag list.

2000-05-17  Jeffrey Stedfast  <fejj@stampede.org>

	* providers/smtp/camel-smtp-transport.c: (smtp_helo): Error
	checking on gethostbyaddr() eliminating a possible segfault.

2000-05-16  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-folder.c (mbox_delete_message_by_uid):
	Implement.

2000-05-12  NotZed  <NotZed@HelixCode.com>

	* camel-movemail.c (camel_movemail): Open the destination with
	O_APPEND, so we dont blow away a partially transferred mbox.
	(camel_movemail): Loop if we get errno=INTR, and not fail.

2000-05-11  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-summary.c (summary_rebuild): Update
	the summarised file size, if everything went ok.
	(camel_mbox_summary_expunge): Clear header flags after updating.

2000-05-16  Chris Toshok  <toshok@helixcode.com>

	* providers/nntp/camel-nntp-folder.c:
	* providers/nntp/camel-nntp-folder.h:
	* providers/nntp/camel-nntp-provider.c: 
	* providers/nntp/camel-nntp-store.c: 
	* providers/nntp/camel-nntp-utils.c: 
	* providers/nntp/camel-nntp-utils.h: 
	get things working with new camel summary stuff.

	* providers/nntp/camel-nntp-summary.c: 
	* providers/nntp/camel-nntp-summary.h: 
	removed files since camel-folder-summary does all we need.

2000-05-15  Jeffrey Stedfast  <fejj@stampede.org>

	* providers/smtp/camel-smtp-transport.c: Added some preliminary
	AUTH support.

2000-05-15  Dan Winship  <danw@helixcode.com>

	* camel-folder.h: Remove camel_folder_get_summary, which no longer
	exists.

2000-05-11  Dan Winship  <danw@helixcode.com>

	* Makefile.am: remove some cruft that we're not currently using.

	* camel-stream-mem.c (camel_stream_mem_new_with_buffer): Change
	to match prototype (size_t vs unsigned int) so it works on 64-bit
	machines. Noted by msw.

2000-05-11  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-folder.c (message_changed): Indicate
	the summary changed also.

2000-05-11  Jeffrey Stedfast  <fejj@stampede.org>

	* providers/smtp/camel-smtp-transport.c: (smtp_helo): 
	Updated to more closely comply with RFC 821 standards

2000-05-11  NotZed  <NotZed@HelixCode.com>

	* camel-mime-part.c (write_to_stream): Unref the filter after
	adding it to the filtering stream.

	* providers/mbox/camel-mbox-summary.c
	(camel_mbox_summary_finalise): Free the folder path.
	(camel_mbox_summary_update): Also save summary when done.
	(camel_mbox_summary_expunge): Unindex items when deleting them.
	(camel_mbox_summary_expunge): Save the index as well as the
	summary.

	* camel-folder-summary.c (camel_folder_summary_finalise): Free the
	summary path.
	(camel_folder_summary_touch): New function, indicate the summary
	info changed.
	(camel_folder_summary_remove): Dirty here.

	* camel-internet-address.c (internet_decode): Free multiple entry
	addresses properly.

	* camel-mime-utils.c (header_decode_mailbox): Plugged another
	memleak, free text after converting it.
	(header_decode_addrspec): More leaks plugged.

	* camel-mime-message.c (finalize): Free message_uid.
	(finalize): Free the recipients hashtable.

2000-05-11    <notzed@helixcode.com>

	* camel-folder-summary.c (camel_folder_summary_finalise): Free
	summary items and charset filters.

2000-05-10    <notzed@helixcode.com>

	* camel-folder-summary.c (camel_folder_summary_finalise): Don't
	free stuff in p, after we've free'd p.

	* providers/mbox/camel-mbox-folder.c (mbox_append_message): Unref
	the stream we created for appending.

2000-05-10  Jeffrey Stedfast  <fejj@stampede.org>

	* providers/smtp/camel-smtp-transport.c: (camel_smtp_transport_class_init):
	Added initialization for service_class

2000-05-10  Dan Winship  <danw@helixcode.com>

	* camel-multipart.c (write_to_stream): fix a stupid typo. Thank
	you, C.

	* camel-mime-part.c (write_to_stream): don't ref the stream before
	wrapper a filter around it, since nothing will ever unref it.

2000-05-10  Christopher James Lahey  <clahey@helixcode.com>

	* Makefile.am: Added camel-types.h, camel-folder-pt-proxy.h, and
	camel-thread-proxy.h.

2000-05-09  Dan Winship  <danw@helixcode.com>

	* providers/sendmail/camel-sendmail-transport.c (_send_internal):
	Bleah. Can't fsync a pipe. As a quick kludge, just don't
	stream_flush it. The right fix will require bringing back
	stream_close though.

2000-05-09  Jeffrey Stedfast  <fejj@stampede.org>
	* camel-internet-address.[c,h]: Undid my changes (moved
	struct _address back into came-internet-address.c)
	* providers/smtp/camel-smtp-transport.c: (_send): changed
	from using it's own address manipulation (using struct _address)
	to using camel_internet_address_get(). Also some format changes
	to keep consistant with the rest of Camel

2000-05-09  Jeffrey Stedfast  <fejj@stampede.org>

	* camel-internet-address.[c,h]: Moved struct _address from
	camel-internet-address.c to camel-internet-address.h
	(hopefully this doesn't break anything...)
	* providers/smtp/camel-smtp-transport.c: (_send): now
	populates the recipient list with To, Cc, and Bcc addresses.
	Should now be able to use this module.

2000-05-09  Dan Winship  <danw@helixcode.com>

	* providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid):
	one more refcounting fix I missed before.

2000-05-08  Jeffrey Stedfast  <fejj@stampede.org>

	* providers/smtp/camel-smtp-transport.c: no longer frees memory it
	shouldn't, updated to reflect camel-stream changes involving
	CamelException (perhaps it should use a different CamelException
	variable than is passed to the camel smtp module?)

2000-05-08  Dan Winship  <danw@helixcode.com>

	* camel-stream.c (camel_stream_read, camel_stream_write,
	camel_stream_flush, camel_stream_reset, camel_stream_printf,
	camel_stream_write_to_stream): Use CamelException to signal
	failure.
	(camel_stream_write_strings): Remove. camel_stream_printf is more
	useful in most of the places that used this.
	(camel_stream_write_string): Change from macro to function to
	prevent problems with double-evaluation.

	* camel-seekable-stream.c (camel_seekable_stream_seek,
	camel_seekable_stream_set_bounds): Use CamelException.
	(reset): Update.

	* camel-seekable-substream.c, camel-stream-buffer.c,
	camel-stream-filter.c, camel-stream-fs.c, camel-stream-mem.c:
	Update.

	* camel-stream-fs.c: Remove the virtual init functions and move
	the code into the creator functions. Add CamelExceptions to
	creation functions that could fail.

	* camel-data-wrapper.c (camel_data_wrapper_write_to_stream): Use
	CamelException.
	* camel-mime-message.c, camel-mime-part.c, camel-multipart.c
	(write_to_stream): Update.

	* camel-mime-parser.c: add an exception to the mime parser private
	data and pass that to stream functions as needed.
	
	* gmime-content-field.c, md5-utils.c: Update (badly) for stream
	changes.
	
	* camel-exception.h (camel_exception_is_set): convenience macro.

	* providers/Makefile.am: disable SMTP for now

	* providers/mbox/camel-mbox-folder.c (mbox_append_message): Pass
	CamelException to the functions that now need it. Check the
	exception after calling camel_stream_flush, and fail if it fails.
	(mbox_get_message_by_uid): More updates.

	* providers/pop/camel-pop3-folder.c,
	providers/pop/camel-pop3-store.c,
	providers/sendmail/camel-sendmail/transport.c: Update.


2000-05-08  NotZed  <NotZed@HelixCode.com>

	* camel-mime-message.c (process_header): Format From and Reply-To
	to at least a decoded string.  Should probably store them as an
	camelinternetaddress.

	* Merged NEW_SUMMARY branch back to trunk, and resolved conflicts.
	
	* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_update):
	Return status.
	(camel_mbox_summary_expunge): Force an update of the summary
	before we do anything.
	(camel_mbox_summary_expunge): Build new xev line in xevnew, and
	free that, and consify xev.
	(camel_mbox_summary_load): If we are rebuilding from scratch, make
	sure we clear the summary content.

	* camel-stream-filter.c (do_close): We NEED a stream close.

2000-05-07  Dan Winship  <danw@helixcode.com>

	Make camel not leak like a sieve.

	* camel-object.c: New subclass of GtkObject which is now the base
	of the Camel object hierarchy. Currently the only difference
	between CamelObject and GtkObject is that CamelObjects don't start
	out floating.

	* *.h: Move a bunch of typedefs to camel-types.h. Standardize on
	using <camel/foo.h> in header files rather than <foo.h>, "foo.h",
	or "camel/foo.h". Remove some unneeded includes.

	* camel-address.c, camel-data-wrapper.c, camel-folder-search.c,
	camel-folder-summary.c, camel-folder.c, camel-mime-filter.c,
	camel-mime-parser.c, camel-service.c, camel-session.c,
	camel-stream.c: These are now subclasses of CamelObject.

	* camel-data-wrapper.c (set_output_stream):
	* camel-medium.c (set_content_object):
	* camel-seekable-substream.c
	(init_with_seekable_stream_and_bounds):
	* providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid): 
	remove gtk_object_sink calls.

	* camel-stream-buffer.c (init_vbuf): 
	* camel-stream-filter.c (camel_stream_filter_new_with_stream):
	ref the original stream.

	* camel-folder-summary.c (camel_folder_summary_finalise): unref
	the filters when finalizing.

	* camel-mime-part-utils.c
	(simple_data_wrapper_construct_from_parser,
	camel_mime_part_construct_content_from_parser):
	* camel-mime-part.c (camel_mime_part_set_content): Unref objects
	that are created only to be handed off to other objects. If
	they're going to be needed later, they will have been additionally
	ref'ed by the object that needs them.

	* providers/pop3/camel-pop3-folder.c (get_message_by_number):
	unref the message stream after creating the data from it.

	* camel-stream.c, camel-stream-buffer.c, camel-stream-filter.c,
	camel-stream-fs.c, camel-stream-mem.c: Remove camel_stream_close,
	since its semantics are dubious (what happens when you close a
	stream other people still have references on?).

	* providers/nntp/camel-nntp-store.c:
	* providers/smtp/camel-smtp-transport.c:
	* providers/pop3/camel-pop3-store.c:
	replace camel_stream_close calls with gtk_object_unref.

	* providers/mbox/camel-mbox-folder.c:
	* providers/nntp/camel-nntp-folder.c:
	* providers/sendmail/camel-sendmail-transport.c:
	replace camel_stream_close with camel_stream_flush +
	gtk_object_unref

2000-05-06  Dan Winship  <danw@helixcode.com>

	* providers/pop3/camel-pop3-store.c (query_auth_types): A machine
	which serves neither POP nor KPOP is not a POP server.

	* providers/smtp/camel-smtp-provider.c: Note in the description
	that this provider is not yet tested.

2000-05-08    <notzed@helixcode.com>

	* camel-mime-part.c (write_to_stream): Free the filter stream when
	done.

	* camel-mime-parser.c (folder_seek): Make sure we add the \n
	terminal when we seek as well (frob!).

	* camel-mime-utils.c (header_decode_addrspec): Plug minor memleak.

	* camel-mime-part.c (finalize): Free header tables once finished.

	* camel-folder-summary.c (camel_folder_summary_remove): Dont try
	to access info after its free'd.

2000-05-07  NotZed  <NotZed@HelixCode.com>

	* camel-mime-part.c (write_to_stream): Apply encoding to content
	part, when writing to a stream *sigh*.

	* camel-stream-filter.c (do_write): implement write for the
	filtering stream.  Writes shouldn't be mixed with reads.
	(do_flush): Implemented flush.  Again write/flush shouldn't be
	mixed with reads.  Only flushes if the last op was write.
	(do_close): Force flush on close.

	* camel-mime-filter.c (filter_run): Oops, make sure we include the
	backlen in the total length before passing onto the filter.

	* camel-mime-filter-from.c: New filter, munges 'From ' lines into
	'>From ', for mbox.

	* camel-mime-parser.c (camel_mime_parser_header_remove): New
	function to remove the parser's raw header, rather than
	manipulating the header directly (wich doesn't work with
	mempools).

	* camel-mime-utils.c (header_address_list_clear): Fixed some
	broken(tm) logic, which would leak entries on multivalued lists.

	* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load):
	Use ibex_save() to save the ibex.  Makes a big difference to
	startup times for very large mailboxes.
	(camel_mbox_summary_expunge): Dum de dum, reimplemented.  Designed
	to be much more robust, and to stop immediately if anything awry
	happens.
	(copy_block): Utility function to copy n bytes from one fd to
	another.
	(header_write): Utility function to write out raw headers to an
	fd.
	(camel_mbox_summary_update): Incremental summary updater.

	* providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid):
	Dont unref the stream, because of the broken(tm) ref model of gtk
	widget that for some odd reason is being perpetuated in camel.	
	(mbox_expunge): Reenable expunge again.
	(mbox_append_message): Removed the optimised mbox append.  If its
	an issue, it can go back later.  Cleaned up a lot, checks error
	returns, and automagically translates 'From ' into '>From' as
	necessary.

2000-05-07    <notzed@helixcode.com>

	* camel-mime-filter.c (filter_run): Oops, forgot to add the
	backlen to the pre-buffer (*poof*).

2000-05-07  NotZed  <NotZed@HelixCode.com>

	* camel-mime-message.c (construct_from_parser): Allow
	HSCAN_FROM_END to terminate the processing of a message.

	* camel-folder-summary.c (perform_content_info_load): Ick, dont
	try and append a node onto its own list.
	(camel_folder_summary_clear): Actually clear the indexes after
	we've removed the messages.
	(camel_folder_summary_clear): Set dirty if it changes.
	(camel_folder_summary_load): Clear dirty.
	(camel_folder_summary_save): Only save if dirty.

	* providers/mbox/camel-mbox-summary.c (summary_header_load): Oops,
	remember to call that parent class first ...
	(summary_header_save): Here too.
	(camel_mbox_summary_load): Do more checking to verify the index
	contents as well as teh summary contents, against the mbox
	contents.
	(camel_mbox_summary_load): Removed some fo that checking, it needs
	more code to work reliably.

2000-05-07    <notzed@helixcode.com>

	* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load):
	Set the size and mtime of the mbox we indexed once done.

	* camel-folder-summary.c (camel_folder_summary_set_index): Dont
	write the index if it changes - let the claler fix it (uh, kind of
	impacts performance).
	(camel_folder_summary_load): close in.

	* camel-folder-summary.c (summary_format_string): Check header
	exists before trying to strip its leading spaces.

2000-05-06  NotZed  <NotZed@HelixCode.com>

	* camel-folder.h: Removed summary info from here, and include
	camel-folder-summary.h as well.
	
	* camel-mime-parser.c (camel_mime_parser_step): Allow it to accept
	a NULL databuffer.

	* providers/mbox/camel-mbox-summary.c: Totally new file, now
	subclasses camel-folder-summary.

	* camel-folder-summary.c (message_info_load): Load the uid as a
	string.
	(message_info_save): And save too.
	(camel_folder_summary_clear): New function, clears the contents of
	the summary.

	* providers/mbox/camel-mbox-folder.c: Fixes for	summary changes.
	(mbox_get_message_by_uid): Completely redone.  Now cross-checks
	the summary information to make sure we get a real message.
	(mbox_append_message): Disabled the copy version of append for
	now.
	(mbox_expunge): Temporarily disabled the expunge function, until
	it is put back in camel-mbox-summary.c

2000-05-05  NotZed  <NotZed@HelixCode.com>

	* camel-folder-summary.c: And same here ...
	(camel_folder_summary_encode_fixed_int32): Ugh, fwrite doesn't
	return -1 on error ..
	(camel_folder_summary_decode_fixed_int32): Neither deos fread.
	(camel_folder_summary_encode_token): Fix here too.
	(summary_build_content_info): Use start-headers to get the pos of
	the message, not parser_tell(), which might not be what we
	expected because of parser_unstep().
	(camel_folder_summary_encode_token): Use bserch() to tokenise the
	values, rather than a linear search.

	* camel-mime-utils.c: Defined out some memory profiling stuff I
	left there by mistake.
	(header_decode_mailbox): Dont try to append the word part of a
	local address if we ran out of words.

	* camel-mime-parser.c (folder_scan_content): Apply the fix from
	the header scanner to here too.
	(folder_scan_header): Only check for end of header if we have
	space for it (didn't end the read with a newline)
	(folder_scan_header): inptr is the only real thing we need
	registerised for performance.  Try to help the compiler be smart
	about it ..
	(folder_scan_header): Simplified the save header case a tad.

	Commented out some memory profiling stuff.

2000-05-05    <notzed@helixcode.com>

	* camel-mime-utils.c (header_decode_mailbox): Plug a memory leak.
	(header_decode_text): Fixed memory leaks with g_string_append().
	(header_encode_string): And here too, and a few other places.  The
	glib api is so awful ...
	(header_content_type_decode): More memory leaks.

2000-05-05    <notzed@helixcode.com>

	* camel-mime-parser.c (folder_scan_init_with_fd): Make sure we
	init the end of buffer sentinal!
	(folder_scan_init_with_stream): And here too ...

2000-05-04  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-folder.c (summary_get_message_info):
	Maxcount is minimum of the max and the requested count, not the
	maximum :)

	* camel-mime-parser.c (folder_scan_content): Properly set midline,
	so we dont falsely catch offset boundary markers (i.e. From inside
	content).
	(folder_read): Set a sentinal on the end of the read data (\n) so
	we dont have to check the buffer boundary in the inner loop.
	(mempool_*): New experimental memory management routines, speed
	up simple structure parsing by about 25% ... not compiled in by
	default.  Something similar may be needed for camel-mime-utils to
	address performance issues with g_malloc and friends.

	* camel-mime-utils.c: Added a macro w(x) used to wrap all warnings
	about mime/rfc violations, so they can be turned off.

	* camel-folder-summary.c (summary_build_content_info): Step after
	the end of a message ...
	Turn into a stand-alone program for testing and profiling.

2000-05-04  Dan Winship  <danw@helixcode.com>

	* providers/pop3/camel-pop3-store.c (pop3_connect): Don't fall
	back to plaintext passwords if APOP fails, since it should also
	fail.

2000-05-04  Dan Winship  <danw@helixcode.com>

	* camel-session.c (camel_session_list_providers): New function to
	replace camel_provider_scan. Returns a list of either (a) all
	currently-loaded providers, or (b) all available providers.

	* camel-url.[ch]: Add an "empty" flag to CamelURL (indicating that
	it contains only a protocol).

	* camel-service.c (camel_service_query_auth_types): Make this take
	a CamelException (since it may have to try to connect to the
	server, and it might not able to.)

	* providers/pop3/camel-pop3-store.c: add KPOP (Kerberized POP)
	support. This is mostly so I have two kinds of authmech to play
	with instead of just one. (But it does actually work.)

	* providers/smtp/camel-smtp-transport.c (query_auth_types): update
	for prototype change, but disable the functionality, since it
	doesn't really support any auth types yet.
	(camel_smtp_transport_get_type): add an object init function to
	set the service url_flags.

2000-05-04  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-summary.c: Yes, and anotherone.

	* camel-mime-utils.c: And another one.

	* camel-mime-part.c: And another one.

	* camel-mime-part-utils.c: And another one.

	* camel-folder-search.c: And another one.

	* camel-mime-parser.c: Reverted a change wihtout a ChangeLog entry.

2000-05-04  NotZed  <NotZed@HelixCode.com>

	* camel-folder-summary.[hc]: Yes, CamelFolderSummary is back ...
	... re-usable class to summarise and index any stream or message
	and to manage/load/save the created summaries.
	
	* camel-folder.c: Include string.h to kill a warning.

2000-05-03  Jason Leach  <leach@wam.umd.edu>

	* Makefile.am (INCLUDES): add $(UNICODE_CFLAGS) to the INCLUDES,
	people who installed libunicde in non-standard include paths need
	this.

2000-05-03  NotZed  <NotZed@HelixCode.com>

	* camel-folder.h: Added pos/bodypos/endpos to the basic message
	content info object.  Size to be removed?  Moved the
	messageconentinfo and messageinfo back to camel-folder-summary.h.

	* camel-mime-filter-index.c (camel_mime_filter_index_set_ibex):
	New function to (re)set the index to use on a filter.

	* camel-mime-parser.c (camel_mime_parser_scan_from): Whole bunch
	of inline docs.
	(camel_mime_parser_drop_step): New function to drop a state from
	the parser.  Needs more testing.

	* camel-mime-utils.c (rfc2047_decode_word): If the iconv handle is
	-1, then dont try and convert (crashes unicode_iconv?).
	(rfc2047_decode_word): Use alloca for variables instead of
	g_malloc - by the rfc they should always be short.
	(rfc2047_decode_word): If we can't do the charset conversion, undo
	the quoted-printable/base64 at least?  Should probably convert
	unknown characters to the utf-8 unknown character.

2000-05-02  Larry Ewing  <lewing@helixcode.com>

	* camel-mime-utils.c (header_decode_date): fix typo when
	dereferencing saveoffset.

2000-05-02  NotZed  <NotZed@HelixCode.com>

	* camel-folder-search.c: Added some header doco.

	* camel.h: REmove gmime-utils.h from here.

	* providers/mbox/camel-mbox-search.[ch]: Removed.  Functionally
	redundant.

	* providers/mbox/camel-mbox-folder.c (mbox_search_by_expression):
	Use the new CamelFolderSearch class to do the actual searching,
	just setup the search here.

	* camel-folder-search.[ch]: A helper class that providers may
	subclass to provide their own search functionality, or they can
	simply use as is, it supports body searches if an ibex is
	supplied, and header searches if a summary is supplied.

2000-05-02  Matt Loper  <matt@helixcode.com>

	* Makefile.am: set G_LOG_DOMAIN.
	* providers/MH/Makefile.am: same.
	* providers/maildir/Makefile.am: same.
	* providers/mbox/Makefile.am: same.
	* providers/nntp/Makefile.am: same.
	* providers/pop3/Makefile.am: same.
	* providers/sendmail/Makefile.am: same.	
	* providers/smtp/Makefile.am: same.		

2000-05-02  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-search.c
	(camel_mbox_folder_search_by_expression): Dont store/remove
	current search from the search list.
	
	* providers/mbox/camel-mbox-folder.h: Removed searches list,
	searches are all sync now.

	* gmime-utils.[ch]: What the hell, remove it.  This will break the
	nntp provider.  The mime parser can be used instead though.
	Removed from all code including it (but none were using it).

	* gmime-utils.c (_store_header_pair_from_string): Removed bizarre
	string_dichotomy version of this.  This code is somewhat redundant
	now, and is headed for death anyway.

	* gstring-util.c (g_string_dichotomy): Same with this one.
	(g_string_clone): Removed a memory leak, g_string_new() allocates
	its own memory.
	(g_string_append_g_string): Allow to append an empty gstring onto
	another gstring, dont abort()!

	* string-utils.c (string_dichotomy): Removed this incredibly weird
	function.

	* camel-folder.c (_create): Replaced the rather obtuse use of
	"string_dichotomy" function with a simple strrchr().  Still not
	sure it'll work.

	* camel-folder-summary.c: cvs removed a long-removed file.

	* camel-mime-parser.c (folder_scan_header): Fix the previous
	overflow problem properly (can happen in 2 places).
	(header_append): A new macro to include the code changed above, so
	it only appears in one place.
	(folder_scan_step): Change the content type to text/plain if the
	multipart is broken.  Doesn't actually change the header though.
	(header_append): Also move the header-start tracking stuff here.
	Could be a static function to save code.

2000-05-02    <notzed@helixcode.com>

	* camel-mime-part-utils.c
	(simple_data_wrapper_construct_from_parser): Dont use autofill on
	these fucking long function anmes!!!!!!

2000-05-02  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-summary.c
	(camel_mbox_summary_expunge): Fix the offset for the summary when
	an item is expunged to take account of the From line.

2000-05-01  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-folder.h (CamelMboxFolder): Removed
	search_id.

	* providers/mbox/camel-mbox-search.c
	(camel_mbox_folder_search_cancel): Remove.d
	(camel_mbox_folder_search_complete): Removed.
	(camel_mbox_folder_search_by_expression): Changed back to sync
	api.
	(struct _searchcontext): Removed cancelled flag.
	(find_context): Removed.
	(func_header_contains): Debug out some search stuff.

	* providers/mbox/camel-mbox-search.h
	(camel_mbox_folder_search_by_expression): Moved back to sync api.

	* providers/mbox/camel-mbox-summary.c
	(camel_mbox_summary_set_flags_by_uid): New function to update the
	flags in the summary.
	(camel_mbox_summary_expunge): Expunge messages from a folder.
	(offset_content): Re-align offsets of summary when messages
	added/removed to an existing summary.
	(camel_mbox_summary_remove_uid): Remove a message summary entry by
	uid.
	(index_folder): Restore flags from X-Evolution header, if they are set.
	(index_folder): Make sure we index using a decimal uid, since
	thats what everything else indexes off (oops).
	Upped SUMMARY_VERSION as a result.
	(camel_mbox_summary_expunge): Oops, my wrong, use the string uid
	to unindex on.

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid):
	Connect to the message_changed signal.
	(_init): Set permanent flags to something reasonable.  No user
	flags yet ...
	(message_changed): If the flags of the message change, update the
	flags in the summary.
	(mbox_expunge): Implement the expunge.
	(camel_mbox_folder_class_init): Renamed all leading _'s to mbox_'s
	(mbox_expunge): Emit a folder_changed signal on expunge (uh, even
	if it didn't ...)

	* camel-folder.c (_finalize): Uh, dont free permanent_flags
	anymore (this wouldn't failed anyway, it was a GList !!!)
	(camel_folder_search_complete): Removed.
	(camel_folder_search_cancel): Removed.
	(camel_folder_expunge): Changed to only allow expunge on an open
	folder.  It doesn't make sense for mbox, otherwise (?)
	(camel_folder_class_init): Added a folder_changed signal.

	* camel-folder.h (struct _CamelFolder): Change permanent_flags to
	a bitfield.
	(list_permanent_flags): Renamed to get_permanent_flags, and
	returns a bitfield.
	(camel_folder_expunge): Changed expunge to a void type.  The
	messages would no longer be useful after they have been removed
	...
	(CamelFolderClass): New function summary_get_by_uid() to get a single
	summary.
	(*search*): Moved back to synchronous search api ... *sigh*
	
	* camel-folder.h: Removed CamelSearchFunc.

	* camel-mime-message.c (set_flag): Removed.
	(camel_mime_message_set_flag): Removed.
	(get_flag): Removed.
	(camel_mime_message_get_flag): Removed.
	(add_flag_to_list): Removed.
	(get_flag_list): Removed.
	(camel_mime_message_get_flag_list): Removed.
	(camel_mime_message_get_flags): New interface to get system flags.
	(camel_mime_message_set_flags):  " to set ".
	(camel_mime_message_get_user_flag): To get a user flag.
	(camel_mime_message_set_user_flag): To set a user flag.
	(finalize): Hmm, the old one free'd the key and data, not good
	when the data is a boolean ...

2000-04-30  Dan Winship  <danw@helixcode.com>

	* camel-provider.h: Tweak the definition of CamelProvider. Among
	other things, a provider may now be both a store and a transport.

	* camel-provider.c: Remove a lot of code we had no intention of
	using. This now only contains two functions: camel_provider_init
	to read the installed .urls files, and camel_provider_load to
	load and register a new provider.

	* camel-session.c: Remove more unused code and simplify some of
	the remaining code. The list of available provider modules is now
	stored in the session, and it handles calling camel_provider_load
	to load them as needed. Provider registration is now done by
	calling back from the module init routine, which allows a single
	module to register providers for multiple URL types.

	* providers/*: Update provider structures and init routines for
	the new stuff. Add a .urls file to each provider specifying what
	urls it handles, and install that with the library.

	* providers/nntp/camel-nntp-provider.c: Add hints towards
	supporting both news: and nntp: URLs, and using nntp as both a
	store and a transport.

2000-04-29  Dan Winship  <danw@helixcode.com>

	* camel-internet-address.c (camel_internet_address_get): const
	poison

	* camel-mime-part-utils.c
	(simple_data_wrapper_construct_from_parser):
	camel_mime_parser_tell() returns an offset from where it started
	parsing, not necessarily from the start of data. Since we're
	parsing a bounded seekable_stream, we need to add the stream's
	starting bound to camel_mime_parser_tell's return value to
	create the substream in the right place.

	* camel-seekable-substream.c
	(camel_seekable_substream_new_with_seekable_stream_and_bounds):
	say CAMEL_STREAM_UNBOUND rather than -1 in doc.

	* camel-seekable-stream.c (camel_seekable_stream_seek): Add more
	info to docs.

2000-04-28  Dan Winship  <danw@helixcode.com>

	* camel-mime-parser.c (folder_scan_header): fix a bug that would
	cause corruption with very long headers.

2000-04-27  Ettore Perazzoli  <ettore@helixcode.com>

	* providers/pop3/Makefile.am (INCLUDES): Add `-I$(srcdir)/../../..'
	to pick the Camel includes.
	* providers/sendmail/Makefile.am (INCLUDES): Likewise.

	* camel.h: Don't #include <camel/data-wrapper-repository.h> anymore.

2000-04-27  NotZed  <NotZed@HelixCode.com>

	* camel-mime-utils.c (check_header): Dont try and check a NULL
	header.

	* camel-recipient.[ch]: Dead.  Its not pining.

	* camel-mime-message.h: Dont include recipients.h anymore.

	* camel-mime-message.c (camel_mime_message_add_recipient): Accept
	name/address separately, and store in an CamelInternetAddress.
	(add_recipient): Removed.
	(remove_recipient): Removed.
	(remove_recipient_address): Renamed from remove_receipient, works
	via address.
	(camel_mime_message_remove_recipient_name): New function to remove
	by name.
	(get_recipients): Removed.
	(camel_mime_message_get_recipients): Return a camel-internet-address.
	(write_to_stream): No longer write receipients directly.
	(write_recipients_to_stream): Removed.
	(write_one_recipient_to_stream): Removed.
	(camel_mime_message_init): Setup recipients hashtable, rather than
	usign the recipients stuff.
	(set_recipient_list_from_string): Killed, a violent and lengthy
	death.
	(process_header): Simplified recipient handling code a lot.
	(received_date_str, sent_date_str, reply_to_str, subject_str,
	from_str): Removed some oddly-defined global statics.
	(camel_mime_message_class_init): Dont initialise above variables
	anymore.
	(init_header_name_table): Removed, use a table to init this, and
	do it in class init (2 lines of code ...).

	* camel-news-address.c: Class to represent news addresses -
	currently empty, and not built.

	* camel-internet-address.h: Class to represent internet (email)
	addresses.

	* camel-address.h: Abstract class to represent (lists of)
	addresses.

2000-04-27  Dan Winship  <danw@helixcode.com>

	* camel-mime-part.c (write_to_stream): Revert previous change. I
	was confused.

	* camel-url.[ch] (camel_url_encode, camel_url_decode): expose
	these routines.

2000-04-26  Dan Winship  <danw@helixcode.com>

	* camel-mime-part.c (write_to_stream): Only write a newline
	between the headers and the content object if the content object
	is not a CamelMedium. (If the content is a medium, it may have its
	own headers, which then need to go before the blank line.)

	* camel-mime-body-part.[ch]: Remove. We weren't using the fields
	that made this different from camel-mime-part, so it basically
	just forced us to do lots of gratuitous typecasting.

	* camel-multipart.[ch]: Use CamelMimePart. Remove the multipart
	parent stuff, since we weren't using that either.

	* etc: update for CamelMimeBodyPart -> CamelMimePart

2000-04-26  Dan Winship  <danw@helixcode.com>

	* camel-medium.c (set_content_object): sink the content object
	after referencing it.

	* camel-mime-part.c: fix various little things in the handling
	of CamelMedium methods. Change camel_mime_part_set_text to the
	more generic camel_mime_part_set_content.

	* camel.h: sync to current reality

	* camel-folder-utils.[ch]: removed

	* camel-mime-utils.c (header_format_date): fix format specifier
	for time zone. Fix typo in month names array.

2000-04-26  NotZed  <NotZed@HelixCode.com>

	* camel-seekable-substream.c (stream_seek): Changed to have
	absolute seek semantics, not relative to the bounds.

	* camel-seekable-stream.c (reset): When we reset, seek to the
	start of the bound, if there is one.
	(stream_tell): Make tell virtual.

	* camel-stream-filter.c (do_available): Removed.

	* camel-stream-buffer.c: Remove leading _'s from static functions.
	(stream_read): Renamed from read().  Fancy that conflicting!  (my
	boo!)  Others too.

	* providers/pop3/camel-pop3-folder.c (get_message_by_number):
	Changed to stream_mem interface.

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Fixed
	for streamfs interface changes, and implement a failure case.
	(_append_message): Changed for fs stream interface change.

	* camel-multipart.c (print_part): Iterate rahter than callback.  I
	hate glists's interface (hence, move this to write_to_stream).
	(write_to_stream): Return an error (yuck, this is a royal PITA to
	do with the stream write interface).

	* camel-mime-message.c: Removed leading _ from static names.

	* camel-mime-part.h: construct_from_parser() now returns an error
	code.

	* camel-mime-part-utils.c
	(camel_mime_part_construct_content_from_parser): Changed to use a
	camel-data-wrapper instead of a camel-simple-data-wrapper (no
	change needed elsewhere?).
	(simple_data_wrapper_construct_from_parser): Fixes for stream-mem
	interface changes.

	* camel-simple-data-wrapper.[ch],
	camel-simple-data-wrapper-stream.[ch],
	camel-stream-data-wrapper.[ch], removed.  Fixed including of these
	files.
	
	* camel-mime-part.c (camel_mime_part_set_text): Remove the use of
	the camel-simple-data-wrapper-stream, just use a mem stream.
	(write_to_stream): Renamed from my_*
	(construct_from_stream): Return an error on error.

	* camel-stream-mem.c (camel_stream_mem_new*): Remove mode
	parameter.

	* camel-stream-mem.h (enum CamelStreamMemMode): Removed.  It
	wasn't used at all.

	* camel-data-wrapper.h: Add camel_data_wrapper_new() to create
	these.
	(write_to_stream, construct_from_stream): Return an error
	indicator for success.  Fixed all methods to match (ICK).

	* Makefile.am (libcamel_la_SOURCES): Remove
	camel-simple-data-wrapper.c, camel-simple-data-wrapper-stream.c,
	camel-stream-data-wrapper.c.  Obsoleted by code re-use!

	* camel-data-wrapper.c (construct_from_stream): Change the default
	implementation to just set the output stream == construction
	stream.  Well, this lets me get rid of both simple-data-wrapper
	and stream-data-wrapper (unused anyway), and
	simple-data-wrapper-stream in one hit.  CamelDataWrapper is now
	also a concrete class.
	(write_to_stream): Use camel_stream_write_to_stream() to
	calculate/return values (and save code).
	Include <errno.h> for obvious reasons.

	* camel-stream.c (eos): Provide a default implementation of .eos().
	(camel_stream_write_to_stream): Make it return an error code on
	error.
	(camel_stream_printf): Changed to return the number of bytes
	written/error.
	(camel_stream_available): Removed.

	* camel-stream-fs.h (enum CamelStreamFsMode): Removed.  Changed to
	use unix modes and so forth (wasn't used for anything but new file
	creation and didn't work well either).

	* camel-stream-fs.c: Removed leading _'s for names.  And removed
	some virtual method 'documentation'.
	(destroy): Dont try and close a closed/error fd.  Only report
	error if close returns -1.  Moved all the code to finalise(), and
	killed this function.
	(init_with_fd): Properly setup the seek offset, if it is a
	valid and seekable file descriptor.
	(init_with_fd_and_bounds): Use off_t for bounds, set bounds on the
	seekable stream.
	(init_with_name): Return error codes.
	(init_with_name_and_bounds): Ditto.
	(camel_stream_fs_new_with_name): REturn NULL object if it failed.
	(camel_stream_fs_new_with_name_and_bounds): Return NULL object on
	failure.  Changed with_name* api's to take unix open style args
	and flags.
	(read): The bounded stream bounds checking seemed off, simplified
	code a bit.
	(write): Implement bounds checking for writing, the comment was
	wrong, it could make sense to bound writing.  Cleaned up a little.
	(available): Gone.
	(eos): Removed.  Use CamelStream's implementation now.
	(close): Reset the fd to -1, provide a warning for bad usage.
	(seek): Cleaned up.  Changed the behaviour a little, the returned
	offset is the absolute position in the file, even in bounded
	streams.	
	(seek): Seek from end mirrors lseek() behaviour (reverse seeking).

2000-04-25  NotZed  <NotZed@HelixCode.com>

	* camel-stream-fs.h (struct _CamelStreamFs): Moved bounds and eof
	indicator to other parent classes.

	* camel-stream.c (camel_stream_printf): New utility
	function.  Obvious use.

	* camel-stream-mem.c: Removed leading _'s from static func's.
	(camel_stream_mem_new_with_byte_array): Fixed for api changes, set
	the owner for the byte array to us.
	: Removed A bunch of gtk doc stuff for static (implementation) functions.
	(available): Removed.
	(write): Fixed the write implementation so that seek() works on a
	seekable memory stream, as expected.  Seeking past the end of the
	buffer has unix semantics (filling with 0).
	(available): Removed.
	(write): Implement seekable stream bounded stream.
	(read): Implement seekable stream bounded stream.
	(close): Dont free the stream_mem if we're not the owner.
	(seek): Allow to seek beyond the end of memory area,
	implement bounds checking.
	(seek): Set errno on bad policy.

	* camel-stream-mem.h (struct _CamelStreamMem): Changed position to off_t.
	(new_with_buffer): Changed len to be a size_t.
	(set_buffer, set_byte_array): New interface functions.
	(struct _CamelStreamMem): Removed position, it is stored in the
	superclass.

	* camel-stream.h: Removed some of the seemingly random
	whitespace.  Removed the available method (its not
	impelemented/useful enough).

	* camel-seekable-substream.c
	(init_with_seekable_stream_and_bounds): Remove the data_available
	stuff, it hasn't been properly implemented/finished, and may never
	work (unfortunately *sigh).
	(reemit_parent_signal): Removed part of the above change.
	(set_bounds): Removed (moved to seekable-stream).
	: Fixed up some of the generally unreadable indenting (sorry,
	wrapping at 80 characters with
	camels_really_long_function_names()
	just_doesnt_work_very_well_does_it().
	(available): Removed.
	(stream_seek): Fixup for object changes.  Make sure we return -1
	if the parent stream can't seek.

	* camel-seekable-stream.c (ccamel_seekable_stream_set_bounds): New
	function to bound any seekable stream.
	: Removed _'s.
	(camel_seekable_stream_class_init): Implement an init function, to
	setup the stream bounds to unbound.

	* camel-seekable-stream.h (CamelSeekableStreamClass): New virtual
	method set_bounds for seekable streams.
	(CAMEL_STREAM_UNBOUND): New define for no bound.

	* camel-seekable-substream.h (struct _CamelSeekableSubstream):
	Removed sup_bound and inf_bound, moved to CamelSeekableStream (and
	renamed, and changed to off_t's).
	(new_with_seekable_stream_and_bounds): Use off_t as the bounds.
	(CamelSeekableSubstreamClass): Uh, why was the intialiser virtual?
	Removed.

	* camel-seekable-stream.[ch] (CamelSeekableStreamClass): Changed seek
	to accept an off_t as the offset.
	(struct _CamelSeekableStream): Renamed cur_pos to position and
	changed it to an off_t type.
	(enum CamelStreamSeekPolicy): Set to match the SEEK_* constants
	from lseek().
	(get_current_position): Renamed to tell().

	* camel-stream-buffer.h: Commented out set_vbuf - never implemented.

2000-04-25  Dan Winship  <danw@helixcode.com>

	* camel-stream-buffer.c (_eos): only return TRUE if the parent is
	at eos AND the buffer has been exhausted

	* camel-mime-message.c: fix some incorrect macro usage that
	resulted in bogus casts

2000-04-24  Dan Winship  <danw@helixcode.com>

	* camel-mime-part-utils.c
	(simple_data_wrapper_construct_from_parser): fix a cut-and-pasto.

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): ref
	(and sink) the message stream if we're going to unref it later.
	Otherwise it could get destroyed while there are still substreams
	attached to it. This needs a cleaner solution.

	* camel.h: remove data-wrapper-repository.h include(s)

2000-04-24  NotZed  <NotZed@HelixCode.com>

	* camel-mime-message.c (construct_from_parser): Allow MESSAGE_END
	_or_ EOF as valid termination conditions.

	* providers/mbox/camel-mbox-summary.c (message_struct_new): Decode
	and then re-encode the addresses, so they are consistently
	formatted.

	* camel-mime-utils.c (header_decode_mailbox): Store the address in
	a _header_address.  And try to get a comment-stored name if there
	is one.
	(header_decode_address): Actually return an address.
	(header_to_decode): Renamed to header_address_decode()
	(header_mailbox_decode): New function to get a single mailbox.
	(header_mime_decode): Return the major/minor value, as
	appropriate.
	(header_address_new, and friends): Whole bunch of utility
	functions for working with the address thingies.
	(header_decode_domain): Free the string header, and dont expand
	'.' into ' . '.

	* camel.c (camel_init): No longer call
	data_wrapper_repository_init.

	* camel-medium.c (write_to_stream): Moved (back) to
	camel-mime-part.
	(add_header):
	(set_header):
	(remove_header): 
	(get_header): Make all these abstract, and spit warnings if
	called.  I guess it could manage the list, but well, it doesn't.

	* camel-medium.h (struct _CamelMedium): Dont store headers here,
	the implementor is the only one who knows their format.
	(CamelMediumClass): Changed header values to be void *'s.  They
	need not be strings?

	* camel-simple-data-wrapper.c (construct_from_stream): And we're
	back.  Set the output stream.
	(construct_from_parser): Moved to camel-mime-part-utils.

	* camel-mime-part-utils.c
	(camel_mime_part_construct_content_from_parser): Create the
	contents of multipart and simple messages.
	(camel_mime_part_construct_content_from_parser): Oops, this was
	totally screwed up, try creating the right cotnent on the right
	object.

	* camel-multipart.c (construct_from_parser): Moved to
	camel-mime-part-utils.
	(separate_part): Removed.

	* camel-mime-part.c (construct_from_stream): Back again!  This now
	switches over to using a mime parser for any mime parts, only.
	(my_write_to_stream): Write our headers and so forth here.
	(add_header): Add header directly, parent class is abstract.
	(remove_header): Ditto.
	(set_header): Ditto.

	* camel-data-wrapper.c (camel_data_wrapper_construct_from_stream):
	Remade abstract.
	(camel_data_wrapper_construct_from_parser): Moved to
	camel_mime_part.

	* camel-data-wrapper.h: Put back construct_from_stream.

	* camel-mime-part.h: Put construct_from_parser in here, the
	data-wrapper shouldn't know about mime.  Ok, so now to undo half
	of the last hours changes ... duh.
	
2000-04-23  Dan Winship  <danw@helixcode.com>

	* camel-mime-utils.c (header_to_decode, header_mime_decode): fix
	some obvious minor bugs noted by -Wall.

2000-04-23  NotZed  <NotZed@HelixCode.com>

	* providers/pop3/camel-pop3-folder.c (get_message_by_number): Use
	construct_from_stream instead of set_input_stream().

	* camel-simple-data-wrapper-stream.c
	(camel_simple_data_wrapper_stream_construct): REmoved the destroy
	callback code.
	(wrapper_destroy_cb): Removed.

	* camel-simple-data-wrapper.h: Add prototype for _construct()
	method.

	* camel.c: Include unicode.h to kill a warning.

	* camel-data-wrapper.h (CameldataWrapperClass): Removed
	construct_from_stream virtual method.
	Removed get/set input stream.

	* data-wrapper-repository.[ch]: Removed&from build.  Obsoleted?
	The justification as is follows: It is mixing storage
	protocol/format with message architecture.  It really just doesn't
	serve any purpose, as each medium implementor will have to have its
	own type->handler mapping, and the only current implementor,
	mimepart has a very simple structure and no need for this.

	* camel-medium.c (write_to_stream): Moved here from most of the
	stuff in camel-mime-part.  Well, the MEDIUM is the one that knows
	what the headers are, and the content is, let it write it out.

	* camel-mime-part-utils.c (camel_mime_part_construct_content):
	Copied from camel-mime-part.c, removed handling of message
	followon state (moved to camel-mime-message).
	(camel_mime_part_construct_content_from_parser): Renamed from
	construct_content.
	(camel_mime_part_construct_headers_from_stream):
	(camel_mime_part_construct_content_from_stream):
	(camel_mime_part_store_stream_in_buffer): Removed.  Replaced by
	the new construct from parser stuff.

	* camel-mime-message.c (construct_from_parser): Do
	construct_from_parser for mime-message.
	(_write_to_stream): Set the mime-version header for medium to
	write out, rather than writing it out ourselves.

	* camel-data-wrapper.c (set_mime_type_field): Ref the
	content_field when we get it?
	(construct_from_stream): Removed.
	(camel_data_wrapper_construct_from_stream): Changed to a helper
	function, creates a mime_parser, and constructs from that.
	(set_input_stream): Removed.
	(camel_data_wrapper_set_input_stream): Removed.
	(get_input_stream): Removed.
	(camel_data_wrapper_get_input_stream): Removed.

	* camel-mime-parser.c (camel_mime_parser_unstep): New function.
	Cause a subsequent call to mime_parser_step() to return the same
	state over again.

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid):
	Initial test code using the mime parser to construct the message.
	(_get_message_by_uid): Use construct_from_stream() instead of
	creating our own parser.

	* camel-mime-part.c (construct_from_parser): part constructor.
	(camel_mime_part_construct_content): Basically a simpler
	replacement for the datawrapper repository.
	(camel_mime_part_init): Set the default type to text/plain.
	(camel_mime_part_construct_content): Removed to
	camel-mime-part-utils.c
	(my_get_output_stream): Removed.  The streeam is in the
	data-wrapper.
	(my_get_content_object): Removed.  The content object is stored in
	the medium.  If none is there, the object wasn't created properly.
	(my_write_content_to_stream): Removed.  The content object is the
	one that knows how to write itself out!!!!!!!!
	(my_write_to_stream): Remove the base header writing stuff - has
	been moved to camel-medium, where it belongs.  This can just be
	used to check for mandatory headers.
	(my_construct_from_stream): Removed.
	(my_set_input_stream): What the hell, i'll remove this too.
	Nobody seems to understand how it differs from create from stream,
	and they both seem to serve the same purpose ...

	* camel-simple-data-wrapper.c (construct_from_parser): Initial
	implementation of a content constructor.
	(construct_from_stream): Removed!  Job taken over by
	construct_from_parser.

	* camel-multipart.c (construct_from_parser): Multipart
	construction routine.
	(camel_multipart_init): Set the default multipart type to
	multipart/mixed.  Duh, no subtype is not allowed anyway.
	(set_input_stream): REmoved.  Replaced by construct_from_parser.

2000-04-22  Dan Winship  <danw@helixcode.com>

	* camel-multipart.[ch]: clean, document, etc.
	(camel_multipart_init): pick a prettier default boundary. Still
	need to deal with the larger problem

2000-04-22  NotZed  <NotZed@HelixCode.com>

	* camel-mime-message.h (struct _CamelMimeMessage): Removed
	send_date, and received_date, and replaced it with a time_t
	'date' (this is what the header is called), and date_offset to
	store the GMT offset of the date.

	* camel-mime-message.c (camel_mime_message_set_from): Update raw
	header as we go.
	(_set_from): Removed.
	(_get_from): Removed.
	(camel_mime_message_get_from): Moved implementation here.
	(camel_mime_message_get_subject): Move implementation here.
	(_get_subject): Nuked.
	(camel_mime_message_set_subject): Handle utf-8 input, and also
	update raw header when changed.
	(_set_subject): Removed.
	(_set_received_date): Removed.
	(camel_mime_message_set_received_date): Removed.
	(_get_received_date): Removed.
	(camel_mime_message_get_received_date): Removed.
	(_get_sent_date): Removed.
	(camel_mime_message_get_sent_date): Removed.
	(camel_mime_message_get_date): New function to get the date as a
	time_t/offset.
	(camel_mime_message_set_date): Set the date as a time_t/offset.
	(camel_mime_message_get_date_string): Get the date as a string.
	(camel_mime_message_init): Initialise the current date as
	'CMAEL_MESSAGE_DATE_CURRENT'.
	(_set_reply_to): Removed.
	(camel_mime_message_set_reply_to): Moved implementation here.
	This is still broken, reply-to can have multiple addresses.
	(_get_reply_to): Removed.
	(_set_field): Removed, no longer used anywhere.
	(_get_field): Also removed.
	(_init_header_name_table): Add the Date header.
	(process_header): Also handle snooping of Date header here.

	* camel-stream-filter.c (finalise): Unref the source stream on
	finalise, and also call the parent class (oops).

	* camel-mime-parser.c (camel_mime_parser_state): New function to
	get the current parser state.
	(camel_mime_parser_stream): Allow you to get the stream back from
	the mime_parser.
	(camel_mime_parser_fd): Alternative to allow you to get the fd
	back from the mime_parser.
	(folder_scan_init_with_stream): Properly ref/unref the stream.
	(folder_scan_close): Properly unref the stream/close the fd on
	exit.
	(folder_scan_init_with_fd): Close the old fd if there is one.

	* camel-data-wrapper.c (camel_data_wrapper_construct_from_parser):
	New method, construct a data wrapper from an initialised parser.
	(construct_from_parser): Empty implementation.
	
	* providers/mbox/camel-mbox-summary.c (message_struct_new):
	Convert subject line to unicode, before storing in the summary.
	(strdup_trim): Removed, no longer needed.

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Ref
	the folder after setting it in the new message.

	* camel-mime-part.c (my_set_content_object): Have the headers
	follow the content-type change here too.
	(my_write_to_stream): Dont write content-type here, automatically
	stored in the headers ...
	(my_write_to_stream): Use header_disposition_format() to format
	the content-disposition header.
	(my_write_to_stream): Removed old code, all headers are now stored
	in the camel-medium level, always.  Need to do the same with
	camel-mime-message i suppose ...
	(my_write_to_stream): Write the content using the parent class,
	not some weird function.
	(camel_mime_part_class_init): Dont override get_output_stream.
	(camel_mime_part_encoding_from_string): Bleh, make it
	case-insensitive.

	* camel-mime-utils.c (header_content_type_is): Handle empty types.
	(header_encode_string): Start of an implementation of the rfc2047
	encoder.  It does iso-8859-1, and us-ascii, and utf-8 (others get
	tricky *sigh*)
	(rfc2047_encode_word): Convert a single word/string into rfc2047
	encoding.
	(quoted_encode): Different quoted-printable encoding for rfc2047
	encoding of headers.

	* gmime-content-field.c (gmime_content_field_write_to_stream): Use
	header_content_type_format() to format it.

2000-04-21  NotZed  <NotZed@HelixCode.com>

	* camel-mime-utils.h: Add prototype for header_param_list_free.

	* camel-recipient.c: New function to remove all the types of a
	recipient list.  I think this whole object needs a major review.

	* camel-mime-message.c (camel_mime_message_class_init): Removed
	parse_header_pair override, override add_header instead.
	(_parse_header_pair): Renamed to add_header.
	(remove_header): Add this method, to make sure we keep upto date
	with removed headers too.
	(_set_field): If given a NULL value, clear it out.
	(_set_recipient_list_from_string): Constify.
	(set_header): Override set_header from camel_medium.
	(process_header): Local function to handle set/add/remove of each
	header we know about.

	* camel-mime-part.c (camel_mime_part_class_init): Removed
	parse_header_pair setup.
	(my_parse_header_pair): Moved into add_header(), removed.
	(my_set_disposition): Allow a NULL disposition to clear it.
	(my_set_content_id): Allow NULL content id to clear it.
	(remove_header): Track removed headers.
	(my_set_description): Allow NULL description to clear it.
	(my_set_content_MD5): Make sure we copy the md5 value, and allow a
	NULL value to reset it.
	(my_set_filename): Copy the filename.
	(my_set_header_lines): Removed.  Nothing uses it, it doesn't
	actually serve any purpose.
	(camel_mime_part_set_header_lines): Ditto.
	(my_get_header_lines): Ditto.
	(camel_mime_part_get_header_lines): Ditto.
	(camel_mime_part_class_init): Remove *_header_lines setup.
	(camel_mime_part_init): Remove header_lines init.
	(my_finalize): Remove header_lines finalise.
	(my_write_to_stream): Write the headers here.  This is just WRONG,
	camel_medium should be doing this.
	(my_get_output_stream): Kill a warning.
	(camel_mime_part_encoding_to_string): Ditto.
	(camel_mime_part_set_description): Unvirtualiase, use add_header()
	to do the processing.
	(my_set_description): Removed.
	(set_disposition): Renamed from my_set_disposition.
	(camel_mime_part_get_description): Get the descriptionf rom the
	get_header method.
	(my_get_description): Removed.
	(my_set_filename): Removed.
	(camel_mime_part_get_filename): Get the parameter from the
	disposition.
	(camel_mime_part_encoding_from_string): Handle NULL string.
	(camel_mime_part_init): Remove reference to filename.
	(my_finalize): Dont free filename.

	* camel-mime-part.h (CamelMimePartClass): Removed
	parse_header_pair() method, it doesn't add anything that
	add_header() can't be used for.
	(CamelMimePartClass): Remove *_header_lines methods.
	(struct _CamelMimePart): Remove header_lines list.
	(struct _CamelMimePart): Removed filename attribute.

	* camel-medium.c (camel_medium_init): Init headers to null, not a
	hashtable.
	(add_header): Append the headers as a list.
	(remove_header): Remove headers as a list.
	(get_header): Likewise for lookup.
	(free_header): Removed, no longer needed.
	(finalize): Free headers using header_raw_clear().
	(camel_medium_set_header): New function, to reset and override all
	values of a header with a new value.

	* camel-medium.h (struct _CamelMedium): Changed to use a
	header_raw struct rather than a hash table, to store headers
	(many headers can occur multiple times).

	* camel-mime-utils.c (header_raw_find_next): New function, allows
	you to find multi-valued header fields.
	(header_disposition_format): New function to format/create
	content-disposition header string.
	(header_param_list_format_append): Function to format parameter
	lists into a GString.
	(header_content_type_format): Function to format content-type into
	a usable format.
	(header_set_param): allow NULL value to remove the parameter.
	(decode_token): Renamed from header_decode_token.
	(header_decode_token): New interface for external use.
	(quoted_decode): Made static to kill annoying warnings.
	(g_strdup_len): Killed, replaced with calls to g_strndup().
	(rfc2047_decode_word): Made static to kill warnings.
	(decode_coded_string): Terminated.
	(g_string_append_len): Made static to kill warnings.
	(header_decode_text): Made static to kill warnings.
	(header_decode_text): Constify.
	(rfc2047_decode_word): Constify.
	(header_param): Constify.
	(header_content_type_new): Copy the type/subtype strings.
	(header_param_list_decode): Made static.
	(header_param_list_format_append): Made static.
	(quoted_decode): Constify.
	(g_string_append_len): Constify.
	(header_token_decode): New function to decode a single token.

	* providers/mbox/camel-mbox-summary.c (header_write): Append a
	trailing \n when writing headers.
	(strdup_trim): Killed a warning.
	(camel_mbox_summary_set_uid): Make sure the next uid is at least 1
	higher than any existing one.
	(header_evolution_decode): Use header_token_decode to get the
	token.

	* camel-mime-parser.c (folder_scan_header): Strip the trailing \n
	of the end of all header lines.

2000-04-20  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-utils.[ch]: Removed.

	* providers/mbox/camel-mbox-parser.[ch]: Removed.  Removed
	references to it.

2000-04-20  Dan Winship  <danw@helixcode.com>

	* camel-mime-utils.c (rfc2047_decode_word): use libunicode iconv
	functions rather than libc ones (since libc might not have them).
	(header_decode_date): add autoconfiscation on timezone code

	* camel.c (camel_init): call unicode_init ()

2000-04-20  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-summary.c (message_struct_new): Trim
	leading/trailing spaces off the raw headers.

	* MERGE NEW_PARSER branch into HEAD, fixed conflicts.
	
	* gmime-content-field.c (_print_parameter): Duh, removed again
	(@@#$@ cvs merge).

	* camel-mime-utils.c (header_content_type_is): Constify.
	(header_content_type_unref): Killed a couple warnings.

	* camel-folder.c (_init): Removed more log crap.

	* providers/Makefile.am (SUBDIRS): Removed nntp, pending fixes for
	summary changes.

	* providers/mbox/camel-mbox-folder.c (_get_message_by_number):
	Fixed for new summary interface.  Added a warning for using this
	broken api.
	(_get_message_by_uid): Fixed for message new with session
	vanishing.

2000-04-19  Dan Winship  <danw@helixcode.com>

	* camel-simple-data-wrapper-stream.c
	(camel_simple_data_wrapper_stream_get_type): This is a subtype of
	CamelSeekableStream, not CamelStream.

	* camel-seekable-substream.c: clean up a lot.
	(eos): When testing for end-of-stream, reset the parent position
	before testing if it is at end-of-stream, since either (a) it may
	have been seek'ed to eos by someone else, or (b) we may have been
	seek'ed away from eos and it hasn't been synced yet.

	* camel-medium.[ch] (camel_medium_add_header): const poison.
	(Belatedly goes with my change of 2000-02-23.)
	(camel_medium_init): Use g_strcase_{hash,equal} on the header
	array.
	
2000-04-18  Dan Winship  <danw@helixcode.com>

	* camel-mime-part.c (my_set_input_stream): 
	* camel-data-wrapper.c (set_input_stream, set_output_stream): do
	better reference counting of streams so they actually go away
	when they should.

	* camel-log.[ch], *: Nuke camel log stuff. Replace calls to
	CAMEL_LOG_WARNING with calls to g_warning.

	* camel-data-wrapper.[ch]:
	* camel-simple-data-wrapper.[ch]:
	* camel-medium.[ch]: Clean, polish, document. Most of the gtk-doc
	comments added to camel-data-wrapper.c note serious problems that
	need to be fixed.

2000-04-17  Dan Winship  <danw@helixcode.com>

	* camel-mime-message.[ch]: Remove the "session" field from
	CamelMimeMessage. Nothing uses it, about half of the existing
	calls to camel_mime_message_new_with_session pass NULL, and
	there's no obvious reason for it to be there.

	* providers/MH/camel-mh-folder.c:
	* providers/maildir/camel-maildir-folder.c:
	* providers/mbox/camel-mbox-folder.c:
	* providers/mbox/camel-mbox-utils.c:
	* providers/nntp/camel-nntp-folder.c:
	* providers/pop3/camel-pop3-folder.c: Use camel_mime_message_new
	instead of camel_mime_message_new_with_session.

	* camel-session.c (get_store_for_protocol_with_url): Set the
	exception if no provider is found.

	* camel-url.c: Add code to encode and decode %-escapes in URLs,
	and do some additional correctness-checking on URL syntax. From
	Tiago Ant�o with modifications by me.

2000-04-14  Chris Toshok  <toshok@helixcode.com>

	* providers/Makefile.am (SUBDIRS): add nntp

2000-04-14  Christopher James Lahey  <clahey@helixcode.com>

	* providers/mbox/camel-mbox-folder.c: Fix switch statement.

2000-04-14  Chris Toshok  <toshok@helixcode.com>

	* providers/nntp/camel-nntp-folder.c (_exists): always return TRUE
	for now.  we need to check the server response to make sure the
	group exists.
	(_get_message_by_uid): make sure to account for the \n we add to
	the string after every line.

	* providers/nntp/camel-nntp-utils.c (get_XOVER_headers): function
	to get the headers using the XOVER command.
	(get_HEAD_headers): function to get the headers using the HEAD
	command on each message. slooooooow.
	(camel_nntp_get_headers): make this function use either XOVER or HEAD
	versions depending on whether or not the server extension is present.

2000-04-14  Dan Winship  <danw@helixcode.com>

	* camel-formatter.[ch]: This didn't belong in Camel. Move to mail/

	* Makefile.am, camel-types.h: remove references to
	camel-formatter.

2000-04-12  Matt Loper  <matt@helixcode.com>

	* camel-folder-pt-proxy.c (_folder_open_cb): Print warning message
	for broken function.
	(_folder_close_cb): Same.

2000-04-12  Miguel de Icaza  <miguel@gnu.org>

	* Makefile.am (pthread_SRC): Use correct names for the pthread
	source variables.

2000-04-10  Dan Winship  <danw@helixcode.com>

	* providers/pop3/camel-pop3-store.c (pop3_connect): fix various
	bugs in APOP code (still untested) and some of the error cases.

	* camel-provider.h: Clarify what provider.protocol, provider.name,
	and provider.description should be.

	* providers/mbox/camel-mbox-provider.c: 
	* providers/pop3/camel-pop3-provider.c: 
	* providers/sendmail/camel-sendmail-provider.c: 
	* providers/smtp/camel-smtp-provider.c: update protocols, names,
	and descriptions

	* providers/mbox/camel-mbox-folder.c (_get_message_by_number):
	implement get_message_by_number for the mail fetch code.

2000-04-09  Jeffrey Stedfast  <fejj@stampede.org>

	* providers/smtp/camel-smtp-transport.c: reformatted to fit
	the standard indent format used by helix code

2000-04-09  Dan Winship  <danw@helixcode.com>

	* camel-movemail.c: New file with new function to dot-lock an mbox
	file and copy it to a safe private directory.

2000-04-08  Christopher James Lahey  <clahey@helixcode.com>

	* providers/smtp/.cvsignore: Added a .cvsignore file.

2000-04-08  Dan Winship  <danw@helixcode.com>

	* providers/sendmail/camel-sendmail-transport.c (_send_internal):
	actually record the pid returned by fork(). Noticed by clahey.

	* providers/smtp/camel-smtp-transport.c: #include <sys/param.h>
	for MAXHOSTNAMELEN. (This is a stopgap: some of the uses of
	MAXHOSTNAMELEN are wrong anyway...)

2000-04-07  Jeffrey Stedfast  <fejj@stampede.org>

	* providers/smtp/camel-smtp-transport.c: fixes to numerous bugs;
	should now build fine.
	* providers/Makefile.am: Readded smtp now that smtp builds without
	error.

2000-04-20  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-summary.c
	(camel_mbox_summary_next_uid): Public function to get the next
	uid, makes sure its saved to disk too.

	* camel-mime-part.c (my_finalize): Fix disposition crap with a
	real disposition.
	(my_set_disposition): Likewise.
	(my_get_disposition): And here.
	(my_write_to_stream): And here, needs more cleanup.

	* providers/mbox/camel-mbox-folder.c (_append_message): Assign a
	new uid at this point.

	* gmime-content-field.c (gmime_content_field_write_to_stream):
	Make something up if we have an invalid/missing content type
	(i.e. text/plain).

2000-04-19  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-folder.c (_delete): Fixed completely
	broken switch() syntax, only compiled because errno is a macro on
	some systems.
	(_list_subfolders): Likewise.

2000-04-18  NotZed  <NotZed@HelixCode.com>

	* camel-mime-parser.c (folder_scan_init): init stream to null.

	* providers/mbox/camel-mbox-summary.c
	(CAMEL_MBOX_SUMMARY_VERSION): Moved to .c file, incremented.
	(index_folder): Changed to have index passed via the summary.
	(decode_string): Do a sanity check on the string size, so we dont
	visit g_malloc()'s friendly abort().

	* camel-folder-pt-proxy.c (camel_folder_pt_proxy_class_init):
	Removed reference to set_name.
	(_set_name): Removed.

	* providers/mbox/camel-mbox-utils.c
	(parsed_information_to_mbox_summary): Removed.  Most of this file
	is about to be binned.

	* providers/mbox/camel-mbox-search.c (func_header_contains): Fixes
	for changes to summary interface.
	(struct _searchcontext): Remove pointer to message info, get it
	straight from the mboxsummary.
	(camel_mbox_folder_search_by_expression): New summary interface.
	(camel_mbox_folder_search_by_expression): Uh, the summary is not
	an object anymore (well not yet).

	* providers/mbox/camel-mbox-folder.c
	(camel_mbox_folder_class_init): Removed set_name init.
	(_set_name): Removed.
	(_open): Call new summary interface.
	(_close): Use new summary interface.
	(_create): Removed a summary object leak.
	(_get_message_count): New summary interface.
	(_get_uid_list): Use new summary interface. FIXME: this is leaky.
	(_get_message_by_uid): Use the new summary interface, some
	cleanup.
	(_append_message): Totally changed, basically just appends the
	message directly, ignores the summary (for now), the summary will
	fix itself up if it needs to.
	(_check_get_or_maybe_generate_summary_file): Bye bye old code.
	(summary_get_message_info): Implement get_message_info again, for
	folder.

	* camel-folder.c (camel_folder_class_init): Removed set_name
	setup.
	(_set_name): Moved contents into _init.
	(_init): Perform the old functions of set_name here.

	* camel-folder.h: Removed the set_name internal interface.

2000-04-14  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-summary.[ch]: Completely replaced with
	new code.

	* Makefile.am (libcamel_la_SOURCES): Removed
	camel-folder-summary.[ch].

	* camel-folder.h (struct _CamelFolder): Removed summary.
	(struct _CamelFolder): Changed flags to be 1 bit bitfields.

	* camel-folder-summary.[ch]: Class removed entirely.

	* camel-folder.c (camel_folder_get_summary): Removed.
	(camel_folder_summary_get_message_info): Moved from
	camel-folder-summary.c
	(camel_folder_summary_get_subfolder_info): Moved from
	camel-folder-summary.c

	* camel-mime-parser.c (folder_scan_step): Store the start of
	headers and start of from in the scan state.
	(camel_mime_parser_tell_start_headers): Query the start of the
	headers.
	(camel_mime_parser_tell_start_from): Query the cached start of
	from marker.

2000-04-13  NotZed  <NotZed@HelixCode.com>

	* gmime-content-field.c (gmime_content_field_free): Removed this
	function.  If its too dangerous to use, it shouldn't be here.
	(gmime_content_field_ref): Also ref the embedded content-type.
	(gmime_content_field_unref): Ditto to unref it.

	* camel-mime-utils.h: Add a refcount for content-type header.

	* camel-mime-utils.c (header_content_type_unref): Implement unref
	for content-type.
	(header_content_type_ref): Implement ref for header content type.

2000-04-12  NotZed  <NotZed@HelixCode.com>

	* gmime-content-field.h: Changed to use a _header_content_type.
	Added type/subtype back for compatability with clients.
	
	* gmime-content-field.c: Basically a total rewrite, and now just a
	thin wrapper ontop of header_content_type.
	(_free_parameter): Got rid of it.
	(gmime_content_field_new): Use header_content_type_* functions.
	(gmime_content_field_set_parameter): Likewise.
	(_print_parameter): Blow away.
	(gmime_content_field_write_to_stream): Get details from the
	content_type field.  Should check if it needs to escape chars in
	the paramter value.
	(gmime_content_field_get_mime_type): Likewise.
	(___debug_print_parameter): Get rid of this rather annoyingly
	named function.
	(gmime_content_field_get_parameter): Simplified function.
	(gmime_content_field_construct_from_string): Fixed this to use a
	real parser.
	(gmime_content_field_is_type): New function to test if a type matches.
	(gmime_content_field_construct_from_string): Track type/subtype
	from subordinate content_type header struct.

	* gmime-rfc2047.[ch]: Removed.  Unused.

	* camel-stream-b64.[ch]: Blown away more duplicated code.

	* Makefile.am: Removed camel-stream-b64.[ch], and
	gmime-base64.[ch].

	* camel-mime-part.c (my_get_content_object): Replaced
	camel-stream-b64 with camel-stream-filter/camel-mime-filter-basic.
	(my_write_content_to_stream): Replaced camel-stream-b64 with the
	camel-stream-filter with an encoder.
	(my_get_content_object): Also implement quoted-printable decoding.
	(my_write_content_to_stream): Also implement quoted-printable
	encoding.
	(my_get_output_stream): Took out stream-b64 code (nothing's being
	executed yet anyway).

	* gmime-base64.[ch]: Blown away.  Not used, dont need it.

	* camel-mime-utils.h: Added offset for this header.  Records where
	it is in the source.

	* camel-mime-utils.c (header_raw_append_parse): Add offset
	parameter, to store where the header is stored in the stream.
	(header_raw_append): Added offset param.
	(header_raw_find): Return offset, if a pointer supplied for it.
	(header_raw_replace): Add offset param.
	(header_content_type_new): New function, to create an empty
	content type.
	(header_content_type_set_param): Set a parameter in the
	content-type.
	(header_set_param): Generic header parameter setting function.
	(header_decode_string): Handle NULL input.

	* camel-mime-parser.c (camel_mime_parser_headers_raw): New
	function to get access to all the raw headers.
	(folder_scan_header): Keep track of the header start position, and
	store it when saving the header.

2000-04-11  NotZed  <NotZed@HelixCode.com>

	* camel-mime-utils.c: Moved a bunch of printf's to debug.

	* camel-mime-parser.c: Moved a bunch of printf's to debug.
	(folder_scan_header): Detect end of each header line using the
	last scanned char, and not the last scanned position.

	* camel-mime-filter-index.[ch]: Indexing filter.  Indexes unicode
	sequences into ibex files.

2000-04-09  NotZed  <NotZed@HelixCode.com>

	* camel-mime-part.c: Dont include gmime-base64.h

	* camel-mime-filter-charset.c (complete): Implement the completion
	function.

	* camel-mime-parser.c (folder_scan_step): If we get to the end of
	the body data, check any filters for outstanding completion data.
	(camel_mime_parser_scan_from): Set whether we scan for "From "
	headers or not.

	* camel-stream-filter.c (do_read): If we get to end of stream on
	the source, then call the filtering completion function to see if
	we have any more data to return.

	* camel-mime-filter-basic.c (filter): Implement quoted printable
	encoding and decoding filters.
	(complete): And the complete function as well.

	* camel-mime-utils.c (base64_encode_close): Also take an input
	buffer, allow closing of filters.
	(quoted_encode_step): First cut, simple quoted-printable encoder.
	Doesn't handle trailing spaces/tabs on end of line properly yet.
	(quoted_encode_close): Complete a quoted-encoding.
	(is_qpsafe): New type check, for quoted-printable safe characters
	(that do not need encoding).  Thats all bits used in the type
	table!  Rebuilt the types table.
	(header_content_type_is): Checks a content type against at
	type/subtype match.
	(header_content_type_param): Handle NULL content type pointer.

2000-04-08  NotZed  <NotZed@HelixCode.com>

	* camel-mime-filter-basic.c (filter): Implement the base64
	encoder.  Problem is, there is no way to know when to close it.
	Close/Reset will have to provide the same args as filter, so it can
	flush remaining data *sigh*

	* camel-mime-utils.c (base64_encode_step): A rather complex base64
	encoder, fast?
	(base64_step_close): Companion function to finish off the base64
	sequence.

	* camel-mime-part.c (my_write_content_to_stream): Changed to use
	camel_stream_write_to_stream().

	* camel-stream.[ch] (camel_stream_write_to_stream): From
	camel_stream_b64_write_to_stream().  Fixed some infinite loop
	bugs with error conditions.

	* camel-stream-b64.[ch] (camel_stream_b64_write_to_stream): Removed.
	This has nothing to do with stream-b64, so i've moved it to
	CamelStream.

	* camel-mime-utils.h: Add a comment about refcounting
	header_content_type struct.

	* Makefile.am: Added camel-stream-filter*.[ch].

	* camel-stream-filter.[ch]: Class to implement a generic
	(multipass) filter ontop of a stream.  Only implements a read-only
	stream.

	* camel-mime-parser.c (camel_mime_parser_filter_add): Ref the
	filter we just added.

	* Makefile.am: Added camel-mime-filter*.[ch].

	* camel-mime-filter-charset.[ch]: A filter to preform character set
	conversion (uses unicode_iconv).

	* camel-mime-filter-save.[ch]: A simple filter which will save all
	data directly to a file or file descriptor.

	* camel-mime-filter-basic.[ch]: Implements the basic mime filters,
	base64 and quoted-printable decoding (encoding not implemented yet).

	* camel-mime-filter.[ch]: A filtering class, which can filter streams
	of data without having to copy them.  Simpler than stream classes,
	and can be plugged into a single stream class (when i write it).

2000-04-07  Dan Winship  <danw@helixcode.com>

	* providers/pop3/camel-pop3-store.c (pop3_connect): Clarify error
	messages.
	(finalize): fix a bug in camel_exception usage
	(pop3_connect): Remember the password after asking for it the
	first time.

2000-04-07  NotZed  <NotZed@HelixCode.com>

	* Makefile.am: Added camel-mime-parser/camel-mime-utils.

	* camel-mime-parser.c: Fast mime parser.

	* camel-mime-utils.c: Mime utility functions, and email header
	parsers.

2000-04-07  NotZed  <NotZed@HelixCode.com>

	* providers/Makefile.am: Removed smtp for now, its a long way from
	building.
	* providers/smtp/Makefile.in: Removed file that shouldn't have been
	checked in.

2000-04-06  Matt Loper  <matt@helixcode.com>

	* camel-folder-pt-proxy.c (_get_full_name): Remove exception param
	from get_full_name() called, since get_full_name() was changed to
	not have an exception in the last param (see dan's notes below).
	(_get_name): same.

2000-04-06  Dan Winship  <danw@helixcode.com>

	* camel-store.[ch]: Reorganize the folder-fetching methods and
	implement a folder cache so that multiple requests for the same
	folder will yield the same CamelFolder object (as long as it
	remains active). Includes some code to remove no-longer-active
	folders from the cache, but it doesn't get used since nothing is
	ever unref'ed in Camel right now...
	
	* providers/mbox/camel-mbox-store.c:
	* providers/pop3/camel-pop3-store.c: update for CamelStore
	changes.

	* camel-folder.[ch]: Remove the (unused) CamelException argument
	from camel_folder_get_name and camel_folder_get_full_name.
	(camel_folder_set_name): make this go away since changing a
	folder's name after it has been created could result in it
	conflicting with a separately-issued folder.
	
2000-04-05  Dan Winship  <danw@helixcode.com>

	* g_url_new really wanted to take a CamelException. So, rename
	Gurl to CamelURL, g_url_* to camel_url_* (with camel_url_new
	taking an exception), and url-util.[ch] to camel-url.[ch]. Also
	force url->port to be numeric and remove camel_service_getport. (I
	was confused before: the URL RFC says the port must be numeric, so
	we don't want to do getportbyname.)

2000-04-01  Dan Winship  <danw@helixcode.com>

	* providers/mbox/camel-mbox-folder.c
	(_check_get_or_maybe_generate_summary_file): Compare
	mbox_file_size and mbox_modtime to the results of stat()ing the
	mbox file, not the summary file. Duh.
	(_close): Update the summary's mbox_file_size and mbox_modtime
	before writing it to disk.

	* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_save,
	camel_mbox_summary_load): Wow. I must have been tired when I wrote
	this code. First, the comparison bug above. Second, it was using
	ntohs and htons instead of ntohl and htonl. Third, I was reading
	the status flag byte in two different places and thus getting out
	of sync. Fourth, it was writing out field_length bytes of each
	header field after having converted field_length to network byte
	order, resulting in lots of random crap being appended, and the
	summary files being huge. (Fortunately, since the size/modtime
	comparison was biffed, the garbage summary read from disk was
	always immediately discarded.)

	* providers/mbox/camel-mbox-parser.c (camel_mbox_parse_file): fix
	an off-by-one error that caused the last-used UID to be reused if
	the summary file was regenerated. (That one wasn't my fault. :-)

2000-03-31  Dan Winship  <danw@helixcode.com>

	* camel-stream-mem.c: implement unimplemented methods

	* gmime-content-field.c
	(gmime_content_field_construct_from_string):
	* data-wrapper-repository.c
	(data_wrapper_repository_get_data_wrapper_type):
	* camel-simple-data-wrapper.c (my_write_to_stream):
	* camel-mime-part.c (my_set_input_stream):
	remove debugging printf()s that no longer seem useful.

2000-03-31  Matt Loper  <matt@helixcode.com>

	* camel-formatter.c (text_to_html): Added "convert_newlines_to_br"
	boolean param, to give the option of not converting '\n's to <br>
	tags. This way, when we stick stuff in a <pre> tag, newlines stay
	newlines.

2000-03-30  Matt Loper  <matt@helixcode.com>

	* camel-formatter.c (handle_text_plain): Use <pre> tag to force
	the use of monospaced fonts.

2000-03-30  Dan Winship  <danw@helixcode.com>

	* camel-service.c (camel_service_getport): Add a htons in the
	default_number case, and document the fact that the function
	returns the port in network byte order.

	* providers/pop3/camel-pop3-store.c (pop3_connect): Revert
	Miguel's change. The port number bug was actually somewhere
	else, and the IP address copying code was fine already.
	
2000-03-29  Miguel de Icaza  <miguel@gnu.org>

	* providers/pop3/camel-pop3-store.c (pop3_connect): Add htons
	(port), and only copy 4 bytes for the IP address to prevent a DNS
	attack. 

2000-03-28  Dan Winship  <danw@helixcode.com>

	* camel-seekable-substream.c
	(camel_seekable_substream_new_with_seekable_stream_and_bounds):
	make this return a CamelStream rather than a
	CamelSeekableSubstream, because that's the way Gtk objects tend to
	work.

	* camel-service.c (camel_service_gethost,
	camel_service_getport): convenience functions to canonicalize
	the host and port values of a service's URL.
	* providers/pop3/camel-pop3-store.c: use them

	* providers/mbox/camel-mbox-folder.c
	(_check_get_or_maybe_generate_summary_file): Make this work when
	the inbox file doesn't yet exist.

2000-03-27  Dan Winship  <danw@helixcode.com>

	* providers/mbox/camel-mbox-folder.c (_append_message): uncomment
	the call to unlink the temp file: there's no way to tell
	camel_stream_fs to truncate a file, so reusing the same file was
	resulting in junk at the ends of messages.

	* camel-folder.[ch]: add delete_message_by_{number,uid}.

	* providers/pop3/camel-pop3-folder.[ch]: implement
	delete_message_by_uid. Add a close method to do expunging
	of deleted messages if requested.

	* providers/pop3/camel-pop3-store.[ch]: support for
	CamelPop3Folder::close. (You have to close the connection
	in order to expunge the folder, thus the store may be
	connected in the CamelService::is_connected sense when it
	is not actually connected to the server.) Also some bugfixes.

2000-03-27  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-folder.c (_append_message): Unref the
	output_stream when done, close doesn't do it.
	(_append_message): Clear all uid's from the appending messages, so
	they are reassigned proper unique id's.

	* gmime-utils.c (get_header_array_from_stream): Actually free the
	header, it is copied elsewhere.

2000-03-26  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Added
	folder parameter to function.  Fixed callers.
	(index_message): Index a message as it is assigned a unique id.

	* camel-mime-part.c (my_set_content_id): Make sure we malloc and
	copy the content_id, otherwise *poof*

2000-03-25  NotZed  <NotZed@HelixCode.com>

	* camel-medium.c (_finalize): Another leak, unref the content if
	finished with it.

	* camel-recipient.c (camel_recipient_table_free): Plug another
	memory leak - actually free the recipient table.

	* camel-mime-message.c (_finalize): Plugged a memory leak with the
	flags table.

	* gmime-utils.c (_store_header_pair_from_string): A simpler, more
	debuggable and functionally identical header extraction function.

2000-03-24  NotZed  <NotZed@HelixCode.com>

	* gmime-content-field.c (gmime_content_field_set_parameter):
	Remove the hash table entry before freeing its key and data.

2000-03-27  Dan Winship  <danw@helixcode.com>

	* providers/Makefile.am (SUBDIRS): Add pop3.

	* providers/pop3/camel-pop3-store.c: keep separate input and
	output streams so the output doesn't end up being buffered.

	* providers/pop3/camel-pop3-folder.c (get_message_by_number):
	finish implementing this.

2000-03-27  Michael Meeks  <michael@helixcode.com>

	* camel-mime-part.c (my_set_disposition): fix so less broken.
	(my_finalize): remove dodgy disposition free.

	* camel-data-wrapper.c (my_set_mime_type_field): unref instead of
	free on mime_type.

2000-03-27  Dan Winship  <danw@helixcode.com>

	* camel-service.c (camel_service_free_auth_types): new routine to
	free the data allocated by camel_service_query_auth_types.

	* providers/pop3/camel-pop3-store.c (free_auth_types): implement

	* camel-stream-mem.c (camel_stream_mem_new_with_buffer): rename
	camel_stream_mem_new_with_buffer to ..._with_byte_array and add a
	new ..._with_buffer that takes a char * rather than a GByteArray.

	* Remove CamelStreamBufferedFs, since CamelStreamBuffer makes it
	redundant.

2000-03-25  Dan Winship  <danw@helixcode.com>

	* camel-folder-summary.[ch]: change the CamelFolderSummary
	interfaces to allow partial summary queries (for dealing
	with very large folders). Remove the "extended_fields" from
	CamelFolderInfo and CamelMessageInfo: this is better dealt
	with by subtyping.

	* providers/mbox/camel-mbox-summary.[ch]: Make CamelMboxSummary a
	subclass of CamelFolderSummary. Update interfaces for that. Remove
	the internal/external summary distinction. Remove the (unused) md5
	checksum in the folder summary. Change the summary file format
	(primarily to make it no longer byte-order dependent) and add a
	version number to it so it will be easier to change in the future.
	
	* providers/mbox/camel-mbox-folder.[ch]
	* providers/mbox/camel-mbox-search.c
	* providers/mbox/camel-mbox-utils.c: update for summary changes

	* camel-exception-list.def: add
	CAMEL_EXCEPTION_FOLDER_SUMMARY_INVALID
	
2000-03-23  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-provider.c: Added flag to provider
	initialisation, to match changed structure.

2000-03-22  NotZed  <NotZed@HelixCode.com>

	* camel-folder.[ch]: Added async search api.

	* providers/mbox/camel-mbox-search.c
	(camel_mbox_folder_search_by_expression): Changed to use an
	asynchronous interface.
	(camel_mbox_folder_search_cancel): Cancel function for async
	interface.

2000-03-23  Dan Winship  <danw@helixcode.com>

	* camel-stream-buffer.c (camel_stream_buffer_read_line): Function
	to read one line of any size from a stream and return it in
	allocated memory.

2000-03-22  Dan Winship  <danw@helixcode.com>

	* camel-service.c (camel_service_query_auth_types): New function
	to query a service for the authentication protocols it supports.
	* providers/pop3/camel-pop3-store.c (query_auth_types): implement

	* camel-provider.c (camel_provider_scan): New function to
	scan the provider dir and return a list of all providers.

	* providers/pop3/camel-pop3-folder.c: fill this in partially
	* providers/pop3/camel-pop3-store.c: make camel_pop3_command
	return the text after "+OK"/"-ERR" and add a separate
	camel_pop3_get_additional_data to get the message body or
	whatever. Also make them take a CamelPop3Store rather than
	a CamelStreamBuffer.

2000-03-22  Matt Loper  <matt@helixcode.com>

	* camel-formatter.c (debug): Disabled some useless debug
	messaging.

2000-03-21  Dan Winship  <danw@helixcode.com>

	* providers/pop3: some initial bits of the POP3 provider, to
	make Matt happy. Incomplete, untested, etc.

2000-03-21  bertrand  <bertrand@helixcode.com>

	* providers/mbox/camel-mbox-summary.c 
	(camel_mbox_summary_append_internal_to_external): copy the size field

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): initialize 
	message_info to NULL

	* camel-folder-summary.h: added the size field.

	* providers/mbox/camel-mbox-summary.h: 
	added the received_date field.

	* providers/mbox/camel-mbox-summary.c:
	documented all functions.

	* camel-folder-summary.h: name change and 
	new fields.

	* providers/mbox/camel-mbox-search.c: update to 
	conform to name change in the summary fields.

2000-03-10  bertrand  <bertrand@helixcode.com>

	* camel-service.h: cosmetic changes.

2000-03-09  Dan Winship  <danw@helixcode.com>

	* s/HelixCode/Helix Code, Inc./ in the copyrights

2000-03-07  bertrand  <bertrand@helixcode.com>

	* camel-formatter.c (handle_mime_part): 
	plug mem leaks due to bad documentation
	of camel_content_field_get_mime_type
	(print_camel_body_part): idem
	(handle_multipart_alternative): idem

	* gmime-content-field.c (gmime_content_field_get_mime_type): 
	documentation fix.


	* camel-mime-part.c (my_finalize): unref the 
	content_input_stream if any. 

2000-03-06  bertrand  <bertrand@helixcode.com>

	* camel-stream-fs.c (_seek): fix a bogus calculation
	in the return position.

2000-03-05  bertrand  <bertrand@helixcode.com>

	* camel-session.h: cosmetic fixes.

	* camel-stream-fs.c (_read): 
	(_seek): fixed the current position so that it refers
	to the current position in the stream, not in its parent.

2000-03-04  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-search.c
	(camel_mbox_folder_search_by_expression): Ref the summary
	after we have got it.

2000-03-04  bertrand  <bertrand@helixcode.com>

	* camel-mime-part.c (my_write_content_to_stream): 
	stream the raw content instead of nothing if the encoding
	is not supported.

	* camel-stream-fs.c (_seek): handle eos more
	properly.

	* camel-formatter.c (get_bonobo_tag_for_object): 
	bonobo-goad-id is the good key to look for. 
	(get_bonobo_tag_for_object): close the <object> tag.
	(get_bonobo_tag_for_object): the correct syntax for the
	to set a parameter inside an <object> tag is :
	<object classid="..."> <param name="uid" value="..."> <param ...>
	</object>

2000-03-03  bertrand  <bertrand@helixcode.com>

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): 
	use set_input_stream instead of construct_from_stream
	to feed the message object. 

	* camel-data-wrapper.c (my_write_to_stream): reset output stream.
	(my_set_input_stream): unref the previous input stream.
	use the set_output_stream for default behaviour.
	(my_set_output_stream): unref previous output stream.

	* camel-mime-part.c (my_write_content_to_stream): reset content
	object output stream.

2000-03-03  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Make
	sure we open with create with a creation mask.

2000-03-01  NotZed  <NotZed@HelixCode.com>

	* camel-mime-part-utils.c
	(camel_mime_part_construct_content_from_stream): DO NOT assert on
	content type, we have fallback code 4 lines below it ... *sigh*

2000-02-29  NotZed  <NotZed@HelixCode.com>

	* Makefile.am (libcamelinclude_HEADERS): Added camel-stream-buffer
	to build.

	* camel-stream-buffer.[ch]: Generic buffer which can be applied to
	any stream.

2000-03-03  bertrand  <bertrand@helixcode.com>

	* camel-formatter.c (handle_image): in the case
	of images, put the content object output stream
	in the url. This allows the message browser
	to show inline images.

	* camel-stream-b64.c (my_read_encode): fixed state
	0 keep value. 

2000-03-02  bertrand  <bertrand@helixcode.com>

	* camel-stream-b64.c (my_read_encode): don't forget to 
	set the state to 0 after 3.
	(my_read_encode): don't forget to encode, even in state 3.

	* camel-simple-data-wrapper.c: static functions are prefixed 
	with my_ instead of _
	* camel-multipart.c: static functions are prefixed 
	with my_ instead of _
	(my_write_to_stream): commented.
	(my_write_to_stream): warning in case the boudary is set
	but is a zero length string.

	* camel-mime-part.c (camel_mime_part_encoding_from_string): 
	remove debug trace. 
	
	* camel-mime-part.c: Replaced all static functions
	with name begining with _ by the same name begining
	with "my_" to prevent the possible conflicts 
	with system symbols Dan warned us about. 
	
	* camel-stream-b64.c (camel_stream_b64_write_to_stream): 
	use CamelStreamB64 type for the input stream.

	* camel-mime-part.c (_get_content_object): remove 
	debugging trace
	(_write_content_to_stream): implement the b64 
	encoding the new way (that is using camel_stream_b64)

	* camel-data-wrapper.c (my_write_to_stream): 
	fix implementation so that it writes properly
	to the output stream even.

	* camel-stream-b64.c (camel_stream_b64_write_to_stream): 
	fix implementation. 

2000-02-29  bertrand  <bertrand@helixcode.com>

	* camel-stream-b64.c (camel_stream_b64_write_to_stream): new
	utility function. 

	* camel-data-wrapper.c (_write_to_stream): default
	implementation. 

	* gmime-utils.c (_store_header_pair_from_string): 
	revert strange changes. 

	* camel-stream-b64.c (my_read_decode): set eos to true when we
	have read the whole input stream. 
	(my_reset): set eos to FALSE.

2000-02-28  NotZed  <NotZed@HelixCode.com>

	* camel-mime-part.c (_parse_header_pair): Dont free this either.

	* camel-medium.c (_remove_header): Ugh, dont free the header
	before we actually remove it.
	(_add_header): Ugh, dont free hashtable entries which may be
	duplicated (hash_insert _will_ reference that memory).

	* string-utils.c (string_trim): Trimming a 0-length string is not
	an error.

	* camel-mime-message.c (_parse_header_pair): Fixed very broken
	memory handling of header_name/value.

	* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev):
	Initialise end_of_last_message always.
	(camel_mbox_copy_file_chunk): Stop trying to read if we run out of
	data, rather than looping forever.
	(camel_mbox_write_xev): Use an open flag when opening with create.

	* camel-folder.c (camel_folder_search_by_expression): No, its not
	a fatal error to search on a non-searchable folder, you just dont
	get any matches.
	(_open): Dont open an opened folder (i dont see why this is really
	a bug, but what the hell ...)

	* providers/mbox/camel-mbox-folder.c (_init): Set search cap on.
	(_open): Call parent class to perform open.  Remove folder-open
	check to parent instead.
	(_create): open takes a creation mask, dont use umask to try and
	set the open mode.
	(_delete): Dont bother checking folder==NULL, its already been
	checked on the external interface (changed to an assertion, this
	would have to be a camel bug).
	(_delete_messages): Likewise.
	(_create): Ditto.
	(_init): Dont go and clear all the paths and shit that the parent
	open just setup for us.
	(_delete_messages): Get rid of more umask stuff.
	(_append_message): Make sure we pass file mode to open with create.
	(_append_message): Cleaned up some indenting to make it readable.

	* camel-stream-b64.c (my_read_encode): Fixed a typo.

	* providers/mbox/camel-mbox-search.c: Changed to use e-sexp,
	rather than filter-sexp.

2000-02-28  bertrand  <bertrand@helixcode.com>

	* camel-stream-b64.c (my_read_encode): encoding
	filter.

2000-02-23  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel-stream-b64.c: changed the __static 
	suffix into a my_ prefix. 
	(camel_stream_b64_set_mode): reset the persistent
	status. 
	(my_read_decode): remove superfluous %
	
	* providers/mbox/camel-mbox-utils.c (camel_mbox_copy_file_chunk): 
	fix exception description message.

2000-02-24  Dan Winship  <danw@helixcode.com>

	* camel-session.c: Add camel_session_get_transport_for_protocol.

	* camel-transport.h:
	* camel-transport.c: Add an abstract CamelTransport class.

	* providers/sendmail/*: A CamelTransport that uses sendmail
	to deliver mail.

2000-02-24  Dan Winship  <danw@helixcode.com>

	* camel-folder.c: use CamelExceptions for run-time errors, not
	incorrect code. Don't bother validating that an object exists from
	inside one of its methods, since you couldn't have gotten there if
	it didn't. Fix some code style bugs.

	(_init): Rename init_with_store to init and add parent_folder,
	separator, and name arguments.
	(_set_name): Get separator from self, not parent_store now.

	* camel-store.h:
	* camel-store.c: Remove get/set_separator.

	* providers/mbox/: Update for above.

2000-02-23  Dan Winship  <danw@helixcode.com>

	* camel-medium.c (_finalize): Free the data in the headers hash
	table.
	(_add_header): g_strdup the header name and value when adding it.

	* camel-mime-part-utils.c
	(camel_mime_part_construct_headers_from_stream): Free the header
	data after calling camel_medium_add_header, since it will have
	g_strdup()ed it itself.

2000-02-22  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-search.c: Dont compile by default.

	* providers/mbox/Makefile.am: Fuck off the filter code.

2000-02-22  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel-stream-b64.c (read_decode__static): 
	don't read the char if we reached the length
	of the output buffer. Hours lost on this
	%$!@# bug : 3.5

	* camel-folder.c (camel_folder_get_subfolder): 
	(camel_folder_create): 
	(camel_folder_delete): 
	(camel_folder_delete_messages): 
	(camel_folder_list_subfolders): 
	(camel_folder_expunge): 
	(camel_folder_get_message_by_number): 
	(camel_folder_get_message_count): 
	(camel_folder_append_message): 
	(camel_folder_copy_message_to): 
	(camel_folder_get_summary): 
	(camel_folder_get_message_uid): 
	(camel_folder_get_message_by_uid): 
	(camel_folder_get_uid_list): 
	Check folder state (open/close) and raise an
	exception if it is not ok. 
	
	* providers/mbox/camel-mbox-folder.c (_create): 
	create the file and the path with two different
	names.

	* camel-folder.c (_create): handle the case 
	when the folder name starts with '/'

	* camel-exception.c (camel_exception_new): use 
	(void) instead of () in decl.

	* camel-exception.h: cosmetic fixes.

	* camel-exception.c (camel_exception_init): new routine.
	Fix a bug in mail/message-list.c
	

	* camel-folder.h: cosmetic changes.

	* camel-stream-b64.c (reset__static): added a
	reset method. Thanks message-browser to find
	so much bugs :)

	* providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): readd
	Unicode libs.

2000-02-21  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel-formatter.c (lookup_unique_id): 
	awful hack to test get_output_stream.
	* camel-stream-b64.[ch] :
	b64 encoding/decoding is now implemented as
	a stream. 
	

2000-02-21  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel-seekable-substream.c (_reemit_parent_signal): 
	emit "data_available" when parent stream emits it. 


2000-02-21  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/Makefile.am: Uh, fixed LIBADD again.  What was
	there was never ever going to work, wasn't it tested?


2000-02-21  Dan Winship  <danw@helixcode.com>

	* camel-session.h: (struct _CamelSession): Add authenticator.

	* camel-session.c (camel_session_new): Add authenticator.
	(camel_session_query_authenticator): New function to query the
	session authenticator for password, etc, information.

2000-02-21  Dan Winship  <danw@helixcode.com>

	* camel-session.c: add CamelExceptions to several functions. Use
	camel_session_new to initialize the session and URL fields of
	created CamelStores as appropriate.

	* camel-store.h:
	* camel-store.c
	* camel-service.h:
	* camel-service.c: Move the session and url (and associated
	functions) from CamelStore to CamelService. Add url_flags to
	CamelService so subclasses can specify which URL components
	are mandatory for them.	Add camel_session_new for
	camel_session_get_store* to use.

	* providers/mbox/camel-mbox-folder.c:
	* providers/mbox/camel-mbox-store.c:
	* providers/mbox/camel-mbox-store.h: Update for above changes.

	* camel-exception-list.def: Once camel is being used for real,
	exceptions won't be renumberable. So renumber them now to make
	more room to add exceptions to the various categories later, and
	add a big warning message.

2000-02-20  Dan Winship  <danw@helixcode.com>

	* providers/mbox/Makefile.am: add libibex back to
	libcamelmbox_la_LIBADD

2000-02-18  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/camel-mbox-search.h
	(camel_mbox_folder_search_by_expression): Added exception to call,
	and fixed caller.

	* providers/mbox/camel-mbox-search.c
	(camel_mbox_folder_search_by_expression): Major changes, to use
	the sexp evaluator from filter/filter-sexp.c to implement the
	searching.
	(func_body_contains): Changed to support multiple strings in 1
	command (results or'd together)

	* url-util.c (g_url_new): Fixed a typo (colon == 0 isn't right),
	and made it so full url's are absolute pathed (Dan, this is how it
	has to work!).  Also, always include a path part, even if it is an
	empty string.

2000-02-18  Dan Winship  <danw@helixcode.com>

	* camel/camel-types.h: New header with the typedefs for all camel
	classes. Now the class headers can just include this and the
	header for the parent type. This makes it possible for
	CamelService to include a CamelSession without creating an
	#include loop.

	* camel/*:	
	* composer/e-msg-composer-attachment-bar.h:
	* mail/folder-browser.c:
	* mail/message-list.c: frob #includes to match the new reality

2000-02-17  Dan Winship  <danw@helixcode.com>

	* camel/camel-service.h:
	* camel/camel-service.c: Make camel-service us a Gurl internally.
	Remove the login/password interfaces and instead provide
	camel_service_connect_with_url. Add CamelExceptions

2000-02-17  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel/camel-formatter.c (handle_text_plain): 
	(handle_text_html): use camel_stream_reset instead
	of seek. The formatter should be able to work 
	with all streams, not only seekable streams. 
	In the case where some provider implementation
	would not be able to provide a reset method 
	to their stream, implementors would have
	to find a workaround.

	* camel/camel-session.c (camel_session_new): use
	(void) instean of () in function decl.

	* camel/camel-folder.c: ifdef async operation 
	related code. 

	* camel/camel-seekable-stream.c (_seek): added a warning.
	(_reset): default implementation of reset for seekable
	stream.

	* camel/camel-mime-message.h: set_received_date declaration fix.
	cosmetic changes.

	* camel/providers/mbox/camel-mbox-provider.c (camel_provider_module_init): 
	use (void) instead of ().

	* camel/camel-stream.c (camel_stream_reset): 
	new method for CamelStream.

2000-02-17  Dan Winship  <danw@helixcode.com>

	* camel/url-util.c (g_url_to_string): New function to convert
	a Gurl back into a char *.

2000-02-17  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel/camel-formatter.c (handle_text_plain): 
	revamped so that it uses the output stream
	of the data wrapper
	(handle_text_html): ditto.
	
	
	* camel/camel-simple-data-wrapper.h: 
	* camel/camel-simple-data-wrapper.c (camel_simple_data_wrapper_new): 
	use (void) instead of ().
	(_get_output_stream): simple implementation. 

2000-02-16  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel/camel-data-wrapper.c (_set_input_stream): ref input stream
	(_set_output_stream): ref output stream
	(_finalize): unref input and output streams

	* camel/camel-seekable-substream.c (_set_bounds): don't
	seek the begining of the substream.
	(_eos): fix eos condition testing. 
	(_finalize): unref parent stream
	(_init_with_seekable_stream_and_bounds): ref parent stream

	* camel/gstring-util.c (g_string_equal_for_hash): 
	(g_string_equal_for_glist): return type is int.

	* camel/camel.h: 
	* camel/camel.c (camel_init): use (void) 
	instead of ().
	
2000-02-16  NotZed  <NotZed@HelixCode.com>

	* providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Added
	libfilter to link line (temporarily?).  Required for
	filter-sexp.

2000-02-15  bertrand  <bertrand@helixcode.com>

	* camel/camel-multipart.c (_localize_part): 
	this routine replaces the _read_part routine
	and does not store the part in a buffer. 
	(_set_input_stream): use the set_input_stream
	instead of the construct_from_stream.
	each bodypart is given an input stream. 

	* camel/camel-mime-part-utils.c: 
	include the data-wrapper-repository header. 
	(camel_mime_part_construct_content_from_stream): 
	use the set_input_stream instead of the 
	construct_from_stream method. 

	* camel/camel-seekable-substream.c (_set_bounds): 
	cur position is set to 0 not to inf_bound.

2000-02-15  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel/camel-mime-part.c: include gmime-base64.h
	various compilation and runtime fixes.
	(_set_input_stream): store the input substream 
	for the content object.

	* camel/camel-data-wrapper.h: declare the 
	set/get function on input/output stream.

	* camel/camel-mime-part.c (_get_content_object): 
	don't use a temporary mem stream. 	

	* camel/camel-seekable-substream.c (_seek): 
	(_eos): 
	(_read): the substream can be unlimited in length

	* camel/camel-data-wrapper.c (camel_data_wrapper_class_init): 
	set the get/set_input/output_stream methods. 	

	* camel/camel-multipart.c (_construct_from_stream): 
	camel_stream_seek -> camel_seekable_stream_seek

2000-02-14  Miguel de Icaza  <miguel@gnu.org>

	* camel/providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Add
	the unicode libraries as well.

	* camel/camel-provider.c (camel_provider_register_as_module): Add
	error reporting here.  Desire to use Solaris increases.  Hair loss
	in the last two hours: 5,400.

	* camel/providers/mbox/camel-mbox-provider.c
	(camel_mbox_get_provider): Renamed function.

	* camel/camel.h: All include files use camel/ now here.

	* camel/providers/mbox/Makefile.am: Drop all the dynamism from
	Camel, and make this a standard library.

2000-02-14  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel/gmime-utils.c (get_header_array_from_stream): use the 
	eos stream method. 
	(gmime_read_line_from_stream): ditto.

	* camel/camel-stream-fs.h (struct ): add the eof field
	cosmetics changes. 

	* camel/camel-stream-fs.c (camel_stream_fs_init): set eof.
	(_read): set eof on end of file.
	(_eos): implemented.

	* camel/gmime-utils.c (get_header_array_from_stream): 
	make a blocking version of the header parser. 
	When the fs stream uses gnome-vfs, this should
	be changed. 
	(gmime_read_line_from_stream): ditto. 

2000-02-11  bertrand  <Bertrand.Guiheneuf@aful.org>

	* camel/camel-stream-fs.c: 
	everywhere, when using the cur_pos field, do it
	on the CamelSeekableStream object.
	(_seek): small fix. 

	* camel/camel-seekable-stream.c (camel_seekable_stream_seek): 
	s/camel_stream_seek/camel_seekable_stream_seek/g

	* camel/camel-seekable-stream.h: 
	(struct ): added a field to store the
	current position.

	* camel/camel-seekable-stream.c (camel_seekable_stream_get_current_position): 
	New function. Allows to get the current position 
	of a seekable stream.
	

2000-02-13  NotZed  <notzed@zedzone.helixcode.com>

	* providers/mbox/camel-mbox-search.c: New file, implements the
	search api for mbox folders.

	* providers/mbox/Makefile.am: Link with ibex.

	* camel-folder.c (camel_folder_has_search_capability): Api
	additions.
	(camel_folder_search_by_expression): Ditto.

2000-02-12  NotZed  <notzed@zedzone.helixcode.com>

	* providers/mbox/camel-mbox-folder.c (_set_name): Setup index
	filename as well.
	(_init_with_store): Init index filename.  Hmm, none of these
	names ever seem to get free'd (FIXME?)

	* providers/mbox/camel-mbox-folder.h: Add index file name.

2000-02-12  NotZed  <notzed@helixcode.com>

	* camel-folder.h: Add folder search functions.

	** Created ChangeLog just for camel **
	 - refer to ../ChangeLog for changes prior to this date.