2000-05-23 Jeffrey Stedfast * providers/imap: Added some initial code to the camel tree for IMAPv4 * providers/imap/.cvsignore: Added to repository * providers/smtp/camel-smtp-transport.c: Added debug fprintf's so that testers can provide more information. Tested with simple messages and a reply to the hello@helixcode.com default message but should really be tested more. (smtp_data): Fixed to use data_wrapper_write_to_stream. * camel-mime-filter-smtp.c (filter): Modified to escape all lines beginning with a '.' and to place a \r before each \n if one did not previously exist. Removed code to escape "From " as it was found to not be needed for SMTP. 2000-05-22 Jeffrey Stedfast * providers/smtp/camel-smtp-transport.c (smtp_data): Fixed the filtered stream. Fixes for stream changes, updated to use camel-mime-filter-smtp. * Makefile.am: Added camel-mime-filter-smtp.c * camel-mime-filter-smtp.[c,h]: Added to camel tree Smtp filter used to change \n into \r\n, escape lone dots, and escape "From "'s. 2000-05-19 NotZed * camel-simple-data-wrapper.c (construct_from_stream): If we already have been constructed, unref our content. (write_to_stream): Check we've been constructued, and change for stream api changes. * camel-mime-parser.c: Removed exception stuff. * md5-utils.c (md5_get_digest_from_stream): repaired. * camel-mime-message.c: Remove exception from write_to_stream, and fix, and fix formatting. * providers/sendmail/camel-sendmail-transport.c (_send_internal): Fix for stream changes. * providers/pop3/camel-pop3-store.c (camel_pop3_command): Fixes for stream changes. * providers/mbox/camel-mbox-folder.c, and elsewhere, fix all stream api changes. (mbox_append_message): Use stream_close() now its back. (mbox_append_message): unref the from filter. * camel-stream-mem.c: And here. * camel-stream-fs.[ch]: Here too. * camel-stream-filter.c: Likewise. This is getting tedious. * camel-stream-buffer.c (stream_write): Fix a few little problems. (stream_close): Reimplmeent. (camel_stream_buffer_read_line): Slightly more efficient version, that also only allocates the right amount of memory for strings. * camel-seekable-substream.c: Likewise. * camel-seekable-stream.[ch]: Remove exceptions, fix formatting, changes for stream (re)fixes. set_bounds returns an error. * camel-stream.[ch]: Remove exceptions. Make flush and reset return an error code, repair all the screwed up formatting, and put back close. * camel-mime-part-utils.c (camel_mime_part_construct_content_from_parser): And here. * camel-mime-part.c (camel_mime_part_set_content): And this too. (write_to_stream): Fixed for stream changes. * camel.h: Fixed. * providers/vee/camel-vee-folder.c (vee_search_by_expression): Implement. Performs an intersection of the two searches. (camel_vee_folder_finalise): Unref search folders. (vee_append_message): Implement append. 2000-05-18 Dan Winship * camel-folder.c: remove message_number_capability and require uid capatibility. (camel_folder_list_subfolders, camel_folder_get_uid_list, camel_folder_get_subfolder_info, camel_folder_get_message_info): removed (camel_folder_get_subfolder_names, camel_folder_free_subfolder_names): new subfolder interfaces. (camel_folder_get_uids, camel_folder_free_uids): new uid interfaces (camel_folder_get_summary, camel_folder_free_summary): new summary interfaces * providers/mbox/camel-mbox-folder.c, * providers/nntp/camel-nntp-folder.c: * providers/vee/camel-vee-folder.c: Update for changes * providers/pop3/camel-pop3-folder.c: Implement get_uids, update for other changes. 2000-05-18 NotZed * providers/vee/camel-vee-folder.c: Guess! * camel-folder-search.c (search_user_flag): Implement user_flag search term. * camel-folder-search.h: Added user_flag search capability (user-flag "blah") * providers/mbox/camel-mbox-folder.c (mbox_init): Set USER flag in permanent flags for the folder. 2000-05-17 Dan Winship * camel-folder.c: Remove unused async open/close and copy_message_to functions. Rename functions without initial _. Fix glib preconditions and gtk-doc comments. 2000-05-17 Dan Winship * camel-data-wrapper.c: remove get/set_output_stream operations. They're redundant with write_to_stream, and CamelMimePart and CamelMimeMessage only implement the latter, meaning that trying to get_output_stream on a CamelMimeMessage that was built from pieces rather than being parsed from a stream doesn't work. Anything that uses get_output_stream can be rewritten to use write_to_stream, so we'll standardize on that. (camel_data_wrapper_new): remove this: CamelDataWrapper is supposed to be an abstract class. (write_to_stream): remove default implementation. (Moved to CamelSimpleDataWrapper) * camel-simple-data-wrapper.c: resurrect, although it's not really the same thing it was before. A simple data wrapper, which is backed by a CamelStream. * camel-mime-part-utils.c (simple_data_wrapper_construct_from_parser): Use construct_from_stream rather than set_output_stream. (camel_mime_part_construct_content_from_parser): Change camel_data_wrapper_new to camel_simple_data_wrapper_new. * camel-mime-part.c (camel_mime_part_set_content): Change camel_data_wrapper_new to camel_simple_data_wrapper_new. 2000-05-17 Darin Adler * camel-folder-summary.c: (message_info_load): Quick fix to get it to compile. I hope I don't get into trouble. 2000-05-17 Dan Winship * camel.h: Don't include the no-longer-distributed possibly-to-be-removed headers. * providers/smtp/camel-smtp-transport.c (smtp_get_email_addr_from_text): fix an off-by-one error in address parsing (smtp_data): use camel_data_wrapper_get_output_stream rather than data_wrapper->output_stream 2000-05-17 NotZed * providers/mbox/camel-mbox-folder.c (message_changed): Snoop changes to user flags on the message into the summary as well. * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_init): Changed version init to include the parent class version info (i.e. add it not overwrite it). * camel-folder-summary.c (message_info_new): Initialise user_flags to empty. (message_info_load): And load user flags. (message_info_save): And save user flags. (message_info_free): And free them. (CAMEL_FOLDER_SUMMARY_VERSION): Bumped file revision. * camel-folder-summary.h: Added user-flags to summary. * camel-mime-message.c (camel_mime_message_set_user_flag): Dont use a hashtable for user flags. (camel_mime_message_get_user_flag): And changed here too. (camel_flag_get): New interface to get a flag from a flag list. Flag lists are easier to work with than hash tables, and save memory too. (camel_flag_set): And set. (camel_flag_list_free): And free. (free_key_only): Discard. (finalize): Remove the flag list. 2000-05-17 Jeffrey Stedfast * providers/smtp/camel-smtp-transport.c: (smtp_helo): Error checking on gethostbyaddr() eliminating a possible segfault. 2000-05-16 NotZed * providers/mbox/camel-mbox-folder.c (mbox_delete_message_by_uid): Implement. 2000-05-12 NotZed * camel-movemail.c (camel_movemail): Open the destination with O_APPEND, so we dont blow away a partially transferred mbox. (camel_movemail): Loop if we get errno=INTR, and not fail. 2000-05-11 NotZed * providers/mbox/camel-mbox-summary.c (summary_rebuild): Update the summarised file size, if everything went ok. (camel_mbox_summary_expunge): Clear header flags after updating. 2000-05-16 Chris Toshok * providers/nntp/camel-nntp-folder.c: * providers/nntp/camel-nntp-folder.h: * providers/nntp/camel-nntp-provider.c: * providers/nntp/camel-nntp-store.c: * providers/nntp/camel-nntp-utils.c: * providers/nntp/camel-nntp-utils.h: get things working with new camel summary stuff. * providers/nntp/camel-nntp-summary.c: * providers/nntp/camel-nntp-summary.h: removed files since camel-folder-summary does all we need. 2000-05-15 Jeffrey Stedfast * providers/smtp/camel-smtp-transport.c: Added some preliminary AUTH support. 2000-05-15 Dan Winship * camel-folder.h: Remove camel_folder_get_summary, which no longer exists. 2000-05-11 Dan Winship * Makefile.am: remove some cruft that we're not currently using. * camel-stream-mem.c (camel_stream_mem_new_with_buffer): Change to match prototype (size_t vs unsigned int) so it works on 64-bit machines. Noted by msw. 2000-05-11 NotZed * providers/mbox/camel-mbox-folder.c (message_changed): Indicate the summary changed also. 2000-05-11 Jeffrey Stedfast * providers/smtp/camel-smtp-transport.c: (smtp_helo): Updated to more closely comply with RFC 821 standards 2000-05-11 NotZed * camel-mime-part.c (write_to_stream): Unref the filter after adding it to the filtering stream. * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_finalise): Free the folder path. (camel_mbox_summary_update): Also save summary when done. (camel_mbox_summary_expunge): Unindex items when deleting them. (camel_mbox_summary_expunge): Save the index as well as the summary. * camel-folder-summary.c (camel_folder_summary_finalise): Free the summary path. (camel_folder_summary_touch): New function, indicate the summary info changed. (camel_folder_summary_remove): Dirty here. * camel-internet-address.c (internet_decode): Free multiple entry addresses properly. * camel-mime-utils.c (header_decode_mailbox): Plugged another memleak, free text after converting it. (header_decode_addrspec): More leaks plugged. * camel-mime-message.c (finalize): Free message_uid. (finalize): Free the recipients hashtable. 2000-05-11 * camel-folder-summary.c (camel_folder_summary_finalise): Free summary items and charset filters. 2000-05-10 * camel-folder-summary.c (camel_folder_summary_finalise): Don't free stuff in p, after we've free'd p. * providers/mbox/camel-mbox-folder.c (mbox_append_message): Unref the stream we created for appending. 2000-05-10 Jeffrey Stedfast * providers/smtp/camel-smtp-transport.c: (camel_smtp_transport_class_init): Added initialization for service_class 2000-05-10 Dan Winship * camel-multipart.c (write_to_stream): fix a stupid typo. Thank you, C. * camel-mime-part.c (write_to_stream): don't ref the stream before wrapper a filter around it, since nothing will ever unref it. 2000-05-10 Christopher James Lahey * Makefile.am: Added camel-types.h, camel-folder-pt-proxy.h, and camel-thread-proxy.h. 2000-05-09 Dan Winship * providers/sendmail/camel-sendmail-transport.c (_send_internal): Bleah. Can't fsync a pipe. As a quick kludge, just don't stream_flush it. The right fix will require bringing back stream_close though. 2000-05-09 Jeffrey Stedfast * camel-internet-address.[c,h]: Undid my changes (moved struct _address back into came-internet-address.c) * providers/smtp/camel-smtp-transport.c: (_send): changed from using it's own address manipulation (using struct _address) to using camel_internet_address_get(). Also some format changes to keep consistant with the rest of Camel 2000-05-09 Jeffrey Stedfast * camel-internet-address.[c,h]: Moved struct _address from camel-internet-address.c to camel-internet-address.h (hopefully this doesn't break anything...) * providers/smtp/camel-smtp-transport.c: (_send): now populates the recipient list with To, Cc, and Bcc addresses. Should now be able to use this module. 2000-05-09 Dan Winship * providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid): one more refcounting fix I missed before. 2000-05-08 Jeffrey Stedfast * providers/smtp/camel-smtp-transport.c: no longer frees memory it shouldn't, updated to reflect camel-stream changes involving CamelException (perhaps it should use a different CamelException variable than is passed to the camel smtp module?) 2000-05-08 Dan Winship * camel-stream.c (camel_stream_read, camel_stream_write, camel_stream_flush, camel_stream_reset, camel_stream_printf, camel_stream_write_to_stream): Use CamelException to signal failure. (camel_stream_write_strings): Remove. camel_stream_printf is more useful in most of the places that used this. (camel_stream_write_string): Change from macro to function to prevent problems with double-evaluation. * camel-seekable-stream.c (camel_seekable_stream_seek, camel_seekable_stream_set_bounds): Use CamelException. (reset): Update. * camel-seekable-substream.c, camel-stream-buffer.c, camel-stream-filter.c, camel-stream-fs.c, camel-stream-mem.c: Update. * camel-stream-fs.c: Remove the virtual init functions and move the code into the creator functions. Add CamelExceptions to creation functions that could fail. * camel-data-wrapper.c (camel_data_wrapper_write_to_stream): Use CamelException. * camel-mime-message.c, camel-mime-part.c, camel-multipart.c (write_to_stream): Update. * camel-mime-parser.c: add an exception to the mime parser private data and pass that to stream functions as needed. * gmime-content-field.c, md5-utils.c: Update (badly) for stream changes. * camel-exception.h (camel_exception_is_set): convenience macro. * providers/Makefile.am: disable SMTP for now * providers/mbox/camel-mbox-folder.c (mbox_append_message): Pass CamelException to the functions that now need it. Check the exception after calling camel_stream_flush, and fail if it fails. (mbox_get_message_by_uid): More updates. * providers/pop/camel-pop3-folder.c, providers/pop/camel-pop3-store.c, providers/sendmail/camel-sendmail/transport.c: Update. 2000-05-08 NotZed * camel-mime-message.c (process_header): Format From and Reply-To to at least a decoded string. Should probably store them as an camelinternetaddress. * Merged NEW_SUMMARY branch back to trunk, and resolved conflicts. * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_update): Return status. (camel_mbox_summary_expunge): Force an update of the summary before we do anything. (camel_mbox_summary_expunge): Build new xev line in xevnew, and free that, and consify xev. (camel_mbox_summary_load): If we are rebuilding from scratch, make sure we clear the summary content. * camel-stream-filter.c (do_close): We NEED a stream close. 2000-05-07 Dan Winship Make camel not leak like a sieve. * camel-object.c: New subclass of GtkObject which is now the base of the Camel object hierarchy. Currently the only difference between CamelObject and GtkObject is that CamelObjects don't start out floating. * *.h: Move a bunch of typedefs to camel-types.h. Standardize on using in header files rather than , "foo.h", or "camel/foo.h". Remove some unneeded includes. * camel-address.c, camel-data-wrapper.c, camel-folder-search.c, camel-folder-summary.c, camel-folder.c, camel-mime-filter.c, camel-mime-parser.c, camel-service.c, camel-session.c, camel-stream.c: These are now subclasses of CamelObject. * camel-data-wrapper.c (set_output_stream): * camel-medium.c (set_content_object): * camel-seekable-substream.c (init_with_seekable_stream_and_bounds): * providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid): remove gtk_object_sink calls. * camel-stream-buffer.c (init_vbuf): * camel-stream-filter.c (camel_stream_filter_new_with_stream): ref the original stream. * camel-folder-summary.c (camel_folder_summary_finalise): unref the filters when finalizing. * camel-mime-part-utils.c (simple_data_wrapper_construct_from_parser, camel_mime_part_construct_content_from_parser): * camel-mime-part.c (camel_mime_part_set_content): Unref objects that are created only to be handed off to other objects. If they're going to be needed later, they will have been additionally ref'ed by the object that needs them. * providers/pop3/camel-pop3-folder.c (get_message_by_number): unref the message stream after creating the data from it. * camel-stream.c, camel-stream-buffer.c, camel-stream-filter.c, camel-stream-fs.c, camel-stream-mem.c: Remove camel_stream_close, since its semantics are dubious (what happens when you close a stream other people still have references on?). * providers/nntp/camel-nntp-store.c: * providers/smtp/camel-smtp-transport.c: * providers/pop3/camel-pop3-store.c: replace camel_stream_close calls with gtk_object_unref. * providers/mbox/camel-mbox-folder.c: * providers/nntp/camel-nntp-folder.c: * providers/sendmail/camel-sendmail-transport.c: replace camel_stream_close with camel_stream_flush + gtk_object_unref 2000-05-06 Dan Winship * providers/pop3/camel-pop3-store.c (query_auth_types): A machine which serves neither POP nor KPOP is not a POP server. * providers/smtp/camel-smtp-provider.c: Note in the description that this provider is not yet tested. 2000-05-08 * camel-mime-part.c (write_to_stream): Free the filter stream when done. * camel-mime-parser.c (folder_seek): Make sure we add the \n terminal when we seek as well (frob!). * camel-mime-utils.c (header_decode_addrspec): Plug minor memleak. * camel-mime-part.c (finalize): Free header tables once finished. * camel-folder-summary.c (camel_folder_summary_remove): Dont try to access info after its free'd. 2000-05-07 NotZed * camel-mime-part.c (write_to_stream): Apply encoding to content part, when writing to a stream *sigh*. * camel-stream-filter.c (do_write): implement write for the filtering stream. Writes shouldn't be mixed with reads. (do_flush): Implemented flush. Again write/flush shouldn't be mixed with reads. Only flushes if the last op was write. (do_close): Force flush on close. * camel-mime-filter.c (filter_run): Oops, make sure we include the backlen in the total length before passing onto the filter. * camel-mime-filter-from.c: New filter, munges 'From ' lines into '>From ', for mbox. * camel-mime-parser.c (camel_mime_parser_header_remove): New function to remove the parser's raw header, rather than manipulating the header directly (wich doesn't work with mempools). * camel-mime-utils.c (header_address_list_clear): Fixed some broken(tm) logic, which would leak entries on multivalued lists. * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load): Use ibex_save() to save the ibex. Makes a big difference to startup times for very large mailboxes. (camel_mbox_summary_expunge): Dum de dum, reimplemented. Designed to be much more robust, and to stop immediately if anything awry happens. (copy_block): Utility function to copy n bytes from one fd to another. (header_write): Utility function to write out raw headers to an fd. (camel_mbox_summary_update): Incremental summary updater. * providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid): Dont unref the stream, because of the broken(tm) ref model of gtk widget that for some odd reason is being perpetuated in camel. (mbox_expunge): Reenable expunge again. (mbox_append_message): Removed the optimised mbox append. If its an issue, it can go back later. Cleaned up a lot, checks error returns, and automagically translates 'From ' into '>From' as necessary. 2000-05-07 * camel-mime-filter.c (filter_run): Oops, forgot to add the backlen to the pre-buffer (*poof*). 2000-05-07 NotZed * camel-mime-message.c (construct_from_parser): Allow HSCAN_FROM_END to terminate the processing of a message. * camel-folder-summary.c (perform_content_info_load): Ick, dont try and append a node onto its own list. (camel_folder_summary_clear): Actually clear the indexes after we've removed the messages. (camel_folder_summary_clear): Set dirty if it changes. (camel_folder_summary_load): Clear dirty. (camel_folder_summary_save): Only save if dirty. * providers/mbox/camel-mbox-summary.c (summary_header_load): Oops, remember to call that parent class first ... (summary_header_save): Here too. (camel_mbox_summary_load): Do more checking to verify the index contents as well as teh summary contents, against the mbox contents. (camel_mbox_summary_load): Removed some fo that checking, it needs more code to work reliably. 2000-05-07 * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load): Set the size and mtime of the mbox we indexed once done. * camel-folder-summary.c (camel_folder_summary_set_index): Dont write the index if it changes - let the claler fix it (uh, kind of impacts performance). (camel_folder_summary_load): close in. * camel-folder-summary.c (summary_format_string): Check header exists before trying to strip its leading spaces. 2000-05-06 NotZed * camel-folder.h: Removed summary info from here, and include camel-folder-summary.h as well. * camel-mime-parser.c (camel_mime_parser_step): Allow it to accept a NULL databuffer. * providers/mbox/camel-mbox-summary.c: Totally new file, now subclasses camel-folder-summary. * camel-folder-summary.c (message_info_load): Load the uid as a string. (message_info_save): And save too. (camel_folder_summary_clear): New function, clears the contents of the summary. * providers/mbox/camel-mbox-folder.c: Fixes for summary changes. (mbox_get_message_by_uid): Completely redone. Now cross-checks the summary information to make sure we get a real message. (mbox_append_message): Disabled the copy version of append for now. (mbox_expunge): Temporarily disabled the expunge function, until it is put back in camel-mbox-summary.c 2000-05-05 NotZed * camel-folder-summary.c: And same here ... (camel_folder_summary_encode_fixed_int32): Ugh, fwrite doesn't return -1 on error .. (camel_folder_summary_decode_fixed_int32): Neither deos fread. (camel_folder_summary_encode_token): Fix here too. (summary_build_content_info): Use start-headers to get the pos of the message, not parser_tell(), which might not be what we expected because of parser_unstep(). (camel_folder_summary_encode_token): Use bserch() to tokenise the values, rather than a linear search. * camel-mime-utils.c: Defined out some memory profiling stuff I left there by mistake. (header_decode_mailbox): Dont try to append the word part of a local address if we ran out of words. * camel-mime-parser.c (folder_scan_content): Apply the fix from the header scanner to here too. (folder_scan_header): Only check for end of header if we have space for it (didn't end the read with a newline) (folder_scan_header): inptr is the only real thing we need registerised for performance. Try to help the compiler be smart about it .. (folder_scan_header): Simplified the save header case a tad. Commented out some memory profiling stuff. 2000-05-05 * camel-mime-utils.c (header_decode_mailbox): Plug a memory leak. (header_decode_text): Fixed memory leaks with g_string_append(). (header_encode_string): And here too, and a few other places. The glib api is so awful ... (header_content_type_decode): More memory leaks. 2000-05-05 * camel-mime-parser.c (folder_scan_init_with_fd): Make sure we init the end of buffer sentinal! (folder_scan_init_with_stream): And here too ... 2000-05-04 NotZed * providers/mbox/camel-mbox-folder.c (summary_get_message_info): Maxcount is minimum of the max and the requested count, not the maximum :) * camel-mime-parser.c (folder_scan_content): Properly set midline, so we dont falsely catch offset boundary markers (i.e. From inside content). (folder_read): Set a sentinal on the end of the read data (\n) so we dont have to check the buffer boundary in the inner loop. (mempool_*): New experimental memory management routines, speed up simple structure parsing by about 25% ... not compiled in by default. Something similar may be needed for camel-mime-utils to address performance issues with g_malloc and friends. * camel-mime-utils.c: Added a macro w(x) used to wrap all warnings about mime/rfc violations, so they can be turned off. * camel-folder-summary.c (summary_build_content_info): Step after the end of a message ... Turn into a stand-alone program for testing and profiling. 2000-05-04 Dan Winship * providers/pop3/camel-pop3-store.c (pop3_connect): Don't fall back to plaintext passwords if APOP fails, since it should also fail. 2000-05-04 Dan Winship * camel-session.c (camel_session_list_providers): New function to replace camel_provider_scan. Returns a list of either (a) all currently-loaded providers, or (b) all available providers. * camel-url.[ch]: Add an "empty" flag to CamelURL (indicating that it contains only a protocol). * camel-service.c (camel_service_query_auth_types): Make this take a CamelException (since it may have to try to connect to the server, and it might not able to.) * providers/pop3/camel-pop3-store.c: add KPOP (Kerberized POP) support. This is mostly so I have two kinds of authmech to play with instead of just one. (But it does actually work.) * providers/smtp/camel-smtp-transport.c (query_auth_types): update for prototype change, but disable the functionality, since it doesn't really support any auth types yet. (camel_smtp_transport_get_type): add an object init function to set the service url_flags. 2000-05-04 NotZed * providers/mbox/camel-mbox-summary.c: Yes, and anotherone. * camel-mime-utils.c: And another one. * camel-mime-part.c: And another one. * camel-mime-part-utils.c: And another one. * camel-folder-search.c: And another one. * camel-mime-parser.c: Reverted a change wihtout a ChangeLog entry. 2000-05-04 NotZed * camel-folder-summary.[hc]: Yes, CamelFolderSummary is back ... ... re-usable class to summarise and index any stream or message and to manage/load/save the created summaries. * camel-folder.c: Include string.h to kill a warning. 2000-05-03 Jason Leach * Makefile.am (INCLUDES): add $(UNICODE_CFLAGS) to the INCLUDES, people who installed libunicde in non-standard include paths need this. 2000-05-03 NotZed * camel-folder.h: Added pos/bodypos/endpos to the basic message content info object. Size to be removed? Moved the messageconentinfo and messageinfo back to camel-folder-summary.h. * camel-mime-filter-index.c (camel_mime_filter_index_set_ibex): New function to (re)set the index to use on a filter. * camel-mime-parser.c (camel_mime_parser_scan_from): Whole bunch of inline docs. (camel_mime_parser_drop_step): New function to drop a state from the parser. Needs more testing. * camel-mime-utils.c (rfc2047_decode_word): If the iconv handle is -1, then dont try and convert (crashes unicode_iconv?). (rfc2047_decode_word): Use alloca for variables instead of g_malloc - by the rfc they should always be short. (rfc2047_decode_word): If we can't do the charset conversion, undo the quoted-printable/base64 at least? Should probably convert unknown characters to the utf-8 unknown character. 2000-05-02 Larry Ewing * camel-mime-utils.c (header_decode_date): fix typo when dereferencing saveoffset. 2000-05-02 NotZed * camel-folder-search.c: Added some header doco. * camel.h: REmove gmime-utils.h from here. * providers/mbox/camel-mbox-search.[ch]: Removed. Functionally redundant. * providers/mbox/camel-mbox-folder.c (mbox_search_by_expression): Use the new CamelFolderSearch class to do the actual searching, just setup the search here. * camel-folder-search.[ch]: A helper class that providers may subclass to provide their own search functionality, or they can simply use as is, it supports body searches if an ibex is supplied, and header searches if a summary is supplied. 2000-05-02 Matt Loper * Makefile.am: set G_LOG_DOMAIN. * providers/MH/Makefile.am: same. * providers/maildir/Makefile.am: same. * providers/mbox/Makefile.am: same. * providers/nntp/Makefile.am: same. * providers/pop3/Makefile.am: same. * providers/sendmail/Makefile.am: same. * providers/smtp/Makefile.am: same. 2000-05-02 NotZed * providers/mbox/camel-mbox-search.c (camel_mbox_folder_search_by_expression): Dont store/remove current search from the search list. * providers/mbox/camel-mbox-folder.h: Removed searches list, searches are all sync now. * gmime-utils.[ch]: What the hell, remove it. This will break the nntp provider. The mime parser can be used instead though. Removed from all code including it (but none were using it). * gmime-utils.c (_store_header_pair_from_string): Removed bizarre string_dichotomy version of this. This code is somewhat redundant now, and is headed for death anyway. * gstring-util.c (g_string_dichotomy): Same with this one. (g_string_clone): Removed a memory leak, g_string_new() allocates its own memory. (g_string_append_g_string): Allow to append an empty gstring onto another gstring, dont abort()! * string-utils.c (string_dichotomy): Removed this incredibly weird function. * camel-folder.c (_create): Replaced the rather obtuse use of "string_dichotomy" function with a simple strrchr(). Still not sure it'll work. * camel-folder-summary.c: cvs removed a long-removed file. * camel-mime-parser.c (folder_scan_header): Fix the previous overflow problem properly (can happen in 2 places). (header_append): A new macro to include the code changed above, so it only appears in one place. (folder_scan_step): Change the content type to text/plain if the multipart is broken. Doesn't actually change the header though. (header_append): Also move the header-start tracking stuff here. Could be a static function to save code. 2000-05-02 * camel-mime-part-utils.c (simple_data_wrapper_construct_from_parser): Dont use autofill on these fucking long function anmes!!!!!! 2000-05-02 NotZed * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_expunge): Fix the offset for the summary when an item is expunged to take account of the From line. 2000-05-01 NotZed * providers/mbox/camel-mbox-folder.h (CamelMboxFolder): Removed search_id. * providers/mbox/camel-mbox-search.c (camel_mbox_folder_search_cancel): Remove.d (camel_mbox_folder_search_complete): Removed. (camel_mbox_folder_search_by_expression): Changed back to sync api. (struct _searchcontext): Removed cancelled flag. (find_context): Removed. (func_header_contains): Debug out some search stuff. * providers/mbox/camel-mbox-search.h (camel_mbox_folder_search_by_expression): Moved back to sync api. * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_set_flags_by_uid): New function to update the flags in the summary. (camel_mbox_summary_expunge): Expunge messages from a folder. (offset_content): Re-align offsets of summary when messages added/removed to an existing summary. (camel_mbox_summary_remove_uid): Remove a message summary entry by uid. (index_folder): Restore flags from X-Evolution header, if they are set. (index_folder): Make sure we index using a decimal uid, since thats what everything else indexes off (oops). Upped SUMMARY_VERSION as a result. (camel_mbox_summary_expunge): Oops, my wrong, use the string uid to unindex on. * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Connect to the message_changed signal. (_init): Set permanent flags to something reasonable. No user flags yet ... (message_changed): If the flags of the message change, update the flags in the summary. (mbox_expunge): Implement the expunge. (camel_mbox_folder_class_init): Renamed all leading _'s to mbox_'s (mbox_expunge): Emit a folder_changed signal on expunge (uh, even if it didn't ...) * camel-folder.c (_finalize): Uh, dont free permanent_flags anymore (this wouldn't failed anyway, it was a GList !!!) (camel_folder_search_complete): Removed. (camel_folder_search_cancel): Removed. (camel_folder_expunge): Changed to only allow expunge on an open folder. It doesn't make sense for mbox, otherwise (?) (camel_folder_class_init): Added a folder_changed signal. * camel-folder.h (struct _CamelFolder): Change permanent_flags to a bitfield. (list_permanent_flags): Renamed to get_permanent_flags, and returns a bitfield. (camel_folder_expunge): Changed expunge to a void type. The messages would no longer be useful after they have been removed ... (CamelFolderClass): New function summary_get_by_uid() to get a single summary. (*search*): Moved back to synchronous search api ... *sigh* * camel-folder.h: Removed CamelSearchFunc. * camel-mime-message.c (set_flag): Removed. (camel_mime_message_set_flag): Removed. (get_flag): Removed. (camel_mime_message_get_flag): Removed. (add_flag_to_list): Removed. (get_flag_list): Removed. (camel_mime_message_get_flag_list): Removed. (camel_mime_message_get_flags): New interface to get system flags. (camel_mime_message_set_flags): " to set ". (camel_mime_message_get_user_flag): To get a user flag. (camel_mime_message_set_user_flag): To set a user flag. (finalize): Hmm, the old one free'd the key and data, not good when the data is a boolean ... 2000-04-30 Dan Winship * camel-provider.h: Tweak the definition of CamelProvider. Among other things, a provider may now be both a store and a transport. * camel-provider.c: Remove a lot of code we had no intention of using. This now only contains two functions: camel_provider_init to read the installed .urls files, and camel_provider_load to load and register a new provider. * camel-session.c: Remove more unused code and simplify some of the remaining code. The list of available provider modules is now stored in the session, and it handles calling camel_provider_load to load them as needed. Provider registration is now done by calling back from the module init routine, which allows a single module to register providers for multiple URL types. * providers/*: Update provider structures and init routines for the new stuff. Add a .urls file to each provider specifying what urls it handles, and install that with the library. * providers/nntp/camel-nntp-provider.c: Add hints towards supporting both news: and nntp: URLs, and using nntp as both a store and a transport. 2000-04-29 Dan Winship * camel-internet-address.c (camel_internet_address_get): const poison * camel-mime-part-utils.c (simple_data_wrapper_construct_from_parser): camel_mime_parser_tell() returns an offset from where it started parsing, not necessarily from the start of data. Since we're parsing a bounded seekable_stream, we need to add the stream's starting bound to camel_mime_parser_tell's return value to create the substream in the right place. * camel-seekable-substream.c (camel_seekable_substream_new_with_seekable_stream_and_bounds): say CAMEL_STREAM_UNBOUND rather than -1 in doc. * camel-seekable-stream.c (camel_seekable_stream_seek): Add more info to docs. 2000-04-28 Dan Winship * camel-mime-parser.c (folder_scan_header): fix a bug that would cause corruption with very long headers. 2000-04-27 Ettore Perazzoli * providers/pop3/Makefile.am (INCLUDES): Add `-I$(srcdir)/../../..' to pick the Camel includes. * providers/sendmail/Makefile.am (INCLUDES): Likewise. * camel.h: Don't #include anymore. 2000-04-27 NotZed * camel-mime-utils.c (check_header): Dont try and check a NULL header. * camel-recipient.[ch]: Dead. Its not pining. * camel-mime-message.h: Dont include recipients.h anymore. * camel-mime-message.c (camel_mime_message_add_recipient): Accept name/address separately, and store in an CamelInternetAddress. (add_recipient): Removed. (remove_recipient): Removed. (remove_recipient_address): Renamed from remove_receipient, works via address. (camel_mime_message_remove_recipient_name): New function to remove by name. (get_recipients): Removed. (camel_mime_message_get_recipients): Return a camel-internet-address. (write_to_stream): No longer write receipients directly. (write_recipients_to_stream): Removed. (write_one_recipient_to_stream): Removed. (camel_mime_message_init): Setup recipients hashtable, rather than usign the recipients stuff. (set_recipient_list_from_string): Killed, a violent and lengthy death. (process_header): Simplified recipient handling code a lot. (received_date_str, sent_date_str, reply_to_str, subject_str, from_str): Removed some oddly-defined global statics. (camel_mime_message_class_init): Dont initialise above variables anymore. (init_header_name_table): Removed, use a table to init this, and do it in class init (2 lines of code ...). * camel-news-address.c: Class to represent news addresses - currently empty, and not built. * camel-internet-address.h: Class to represent internet (email) addresses. * camel-address.h: Abstract class to represent (lists of) addresses. 2000-04-27 Dan Winship * camel-mime-part.c (write_to_stream): Revert previous change. I was confused. * camel-url.[ch] (camel_url_encode, camel_url_decode): expose these routines. 2000-04-26 Dan Winship * camel-mime-part.c (write_to_stream): Only write a newline between the headers and the content object if the content object is not a CamelMedium. (If the content is a medium, it may have its own headers, which then need to go before the blank line.) * camel-mime-body-part.[ch]: Remove. We weren't using the fields that made this different from camel-mime-part, so it basically just forced us to do lots of gratuitous typecasting. * camel-multipart.[ch]: Use CamelMimePart. Remove the multipart parent stuff, since we weren't using that either. * etc: update for CamelMimeBodyPart -> CamelMimePart 2000-04-26 Dan Winship * camel-medium.c (set_content_object): sink the content object after referencing it. * camel-mime-part.c: fix various little things in the handling of CamelMedium methods. Change camel_mime_part_set_text to the more generic camel_mime_part_set_content. * camel.h: sync to current reality * camel-folder-utils.[ch]: removed * camel-mime-utils.c (header_format_date): fix format specifier for time zone. Fix typo in month names array. 2000-04-26 NotZed * camel-seekable-substream.c (stream_seek): Changed to have absolute seek semantics, not relative to the bounds. * camel-seekable-stream.c (reset): When we reset, seek to the start of the bound, if there is one. (stream_tell): Make tell virtual. * camel-stream-filter.c (do_available): Removed. * camel-stream-buffer.c: Remove leading _'s from static functions. (stream_read): Renamed from read(). Fancy that conflicting! (my boo!) Others too. * providers/pop3/camel-pop3-folder.c (get_message_by_number): Changed to stream_mem interface. * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Fixed for streamfs interface changes, and implement a failure case. (_append_message): Changed for fs stream interface change. * camel-multipart.c (print_part): Iterate rahter than callback. I hate glists's interface (hence, move this to write_to_stream). (write_to_stream): Return an error (yuck, this is a royal PITA to do with the stream write interface). * camel-mime-message.c: Removed leading _ from static names. * camel-mime-part.h: construct_from_parser() now returns an error code. * camel-mime-part-utils.c (camel_mime_part_construct_content_from_parser): Changed to use a camel-data-wrapper instead of a camel-simple-data-wrapper (no change needed elsewhere?). (simple_data_wrapper_construct_from_parser): Fixes for stream-mem interface changes. * camel-simple-data-wrapper.[ch], camel-simple-data-wrapper-stream.[ch], camel-stream-data-wrapper.[ch], removed. Fixed including of these files. * camel-mime-part.c (camel_mime_part_set_text): Remove the use of the camel-simple-data-wrapper-stream, just use a mem stream. (write_to_stream): Renamed from my_* (construct_from_stream): Return an error on error. * camel-stream-mem.c (camel_stream_mem_new*): Remove mode parameter. * camel-stream-mem.h (enum CamelStreamMemMode): Removed. It wasn't used at all. * camel-data-wrapper.h: Add camel_data_wrapper_new() to create these. (write_to_stream, construct_from_stream): Return an error indicator for success. Fixed all methods to match (ICK). * Makefile.am (libcamel_la_SOURCES): Remove camel-simple-data-wrapper.c, camel-simple-data-wrapper-stream.c, camel-stream-data-wrapper.c. Obsoleted by code re-use! * camel-data-wrapper.c (construct_from_stream): Change the default implementation to just set the output stream == construction stream. Well, this lets me get rid of both simple-data-wrapper and stream-data-wrapper (unused anyway), and simple-data-wrapper-stream in one hit. CamelDataWrapper is now also a concrete class. (write_to_stream): Use camel_stream_write_to_stream() to calculate/return values (and save code). Include for obvious reasons. * camel-stream.c (eos): Provide a default implementation of .eos(). (camel_stream_write_to_stream): Make it return an error code on error. (camel_stream_printf): Changed to return the number of bytes written/error. (camel_stream_available): Removed. * camel-stream-fs.h (enum CamelStreamFsMode): Removed. Changed to use unix modes and so forth (wasn't used for anything but new file creation and didn't work well either). * camel-stream-fs.c: Removed leading _'s for names. And removed some virtual method 'documentation'. (destroy): Dont try and close a closed/error fd. Only report error if close returns -1. Moved all the code to finalise(), and killed this function. (init_with_fd): Properly setup the seek offset, if it is a valid and seekable file descriptor. (init_with_fd_and_bounds): Use off_t for bounds, set bounds on the seekable stream. (init_with_name): Return error codes. (init_with_name_and_bounds): Ditto. (camel_stream_fs_new_with_name): REturn NULL object if it failed. (camel_stream_fs_new_with_name_and_bounds): Return NULL object on failure. Changed with_name* api's to take unix open style args and flags. (read): The bounded stream bounds checking seemed off, simplified code a bit. (write): Implement bounds checking for writing, the comment was wrong, it could make sense to bound writing. Cleaned up a little. (available): Gone. (eos): Removed. Use CamelStream's implementation now. (close): Reset the fd to -1, provide a warning for bad usage. (seek): Cleaned up. Changed the behaviour a little, the returned offset is the absolute position in the file, even in bounded streams. (seek): Seek from end mirrors lseek() behaviour (reverse seeking). 2000-04-25 NotZed * camel-stream-fs.h (struct _CamelStreamFs): Moved bounds and eof indicator to other parent classes. * camel-stream.c (camel_stream_printf): New utility function. Obvious use. * camel-stream-mem.c: Removed leading _'s from static func's. (camel_stream_mem_new_with_byte_array): Fixed for api changes, set the owner for the byte array to us. : Removed A bunch of gtk doc stuff for static (implementation) functions. (available): Removed. (write): Fixed the write implementation so that seek() works on a seekable memory stream, as expected. Seeking past the end of the buffer has unix semantics (filling with 0). (available): Removed. (write): Implement seekable stream bounded stream. (read): Implement seekable stream bounded stream. (close): Dont free the stream_mem if we're not the owner. (seek): Allow to seek beyond the end of memory area, implement bounds checking. (seek): Set errno on bad policy. * camel-stream-mem.h (struct _CamelStreamMem): Changed position to off_t. (new_with_buffer): Changed len to be a size_t. (set_buffer, set_byte_array): New interface functions. (struct _CamelStreamMem): Removed position, it is stored in the superclass. * camel-stream.h: Removed some of the seemingly random whitespace. Removed the available method (its not impelemented/useful enough). * camel-seekable-substream.c (init_with_seekable_stream_and_bounds): Remove the data_available stuff, it hasn't been properly implemented/finished, and may never work (unfortunately *sigh). (reemit_parent_signal): Removed part of the above change. (set_bounds): Removed (moved to seekable-stream). : Fixed up some of the generally unreadable indenting (sorry, wrapping at 80 characters with camels_really_long_function_names() just_doesnt_work_very_well_does_it(). (available): Removed. (stream_seek): Fixup for object changes. Make sure we return -1 if the parent stream can't seek. * camel-seekable-stream.c (ccamel_seekable_stream_set_bounds): New function to bound any seekable stream. : Removed _'s. (camel_seekable_stream_class_init): Implement an init function, to setup the stream bounds to unbound. * camel-seekable-stream.h (CamelSeekableStreamClass): New virtual method set_bounds for seekable streams. (CAMEL_STREAM_UNBOUND): New define for no bound. * camel-seekable-substream.h (struct _CamelSeekableSubstream): Removed sup_bound and inf_bound, moved to CamelSeekableStream (and renamed, and changed to off_t's). (new_with_seekable_stream_and_bounds): Use off_t as the bounds. (CamelSeekableSubstreamClass): Uh, why was the intialiser virtual? Removed. * camel-seekable-stream.[ch] (CamelSeekableStreamClass): Changed seek to accept an off_t as the offset. (struct _CamelSeekableStream): Renamed cur_pos to position and changed it to an off_t type. (enum CamelStreamSeekPolicy): Set to match the SEEK_* constants from lseek(). (get_current_position): Renamed to tell(). * camel-stream-buffer.h: Commented out set_vbuf - never implemented. 2000-04-25 Dan Winship * camel-stream-buffer.c (_eos): only return TRUE if the parent is at eos AND the buffer has been exhausted * camel-mime-message.c: fix some incorrect macro usage that resulted in bogus casts 2000-04-24 Dan Winship * camel-mime-part-utils.c (simple_data_wrapper_construct_from_parser): fix a cut-and-pasto. * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): ref (and sink) the message stream if we're going to unref it later. Otherwise it could get destroyed while there are still substreams attached to it. This needs a cleaner solution. * camel.h: remove data-wrapper-repository.h include(s) 2000-04-24 NotZed * camel-mime-message.c (construct_from_parser): Allow MESSAGE_END _or_ EOF as valid termination conditions. * providers/mbox/camel-mbox-summary.c (message_struct_new): Decode and then re-encode the addresses, so they are consistently formatted. * camel-mime-utils.c (header_decode_mailbox): Store the address in a _header_address. And try to get a comment-stored name if there is one. (header_decode_address): Actually return an address. (header_to_decode): Renamed to header_address_decode() (header_mailbox_decode): New function to get a single mailbox. (header_mime_decode): Return the major/minor value, as appropriate. (header_address_new, and friends): Whole bunch of utility functions for working with the address thingies. (header_decode_domain): Free the string header, and dont expand '.' into ' . '. * camel.c (camel_init): No longer call data_wrapper_repository_init. * camel-medium.c (write_to_stream): Moved (back) to camel-mime-part. (add_header): (set_header): (remove_header): (get_header): Make all these abstract, and spit warnings if called. I guess it could manage the list, but well, it doesn't. * camel-medium.h (struct _CamelMedium): Dont store headers here, the implementor is the only one who knows their format. (CamelMediumClass): Changed header values to be void *'s. They need not be strings? * camel-simple-data-wrapper.c (construct_from_stream): And we're back. Set the output stream. (construct_from_parser): Moved to camel-mime-part-utils. * camel-mime-part-utils.c (camel_mime_part_construct_content_from_parser): Create the contents of multipart and simple messages. (camel_mime_part_construct_content_from_parser): Oops, this was totally screwed up, try creating the right cotnent on the right object. * camel-multipart.c (construct_from_parser): Moved to camel-mime-part-utils. (separate_part): Removed. * camel-mime-part.c (construct_from_stream): Back again! This now switches over to using a mime parser for any mime parts, only. (my_write_to_stream): Write our headers and so forth here. (add_header): Add header directly, parent class is abstract. (remove_header): Ditto. (set_header): Ditto. * camel-data-wrapper.c (camel_data_wrapper_construct_from_stream): Remade abstract. (camel_data_wrapper_construct_from_parser): Moved to camel_mime_part. * camel-data-wrapper.h: Put back construct_from_stream. * camel-mime-part.h: Put construct_from_parser in here, the data-wrapper shouldn't know about mime. Ok, so now to undo half of the last hours changes ... duh. 2000-04-23 Dan Winship * camel-mime-utils.c (header_to_decode, header_mime_decode): fix some obvious minor bugs noted by -Wall. 2000-04-23 NotZed * providers/pop3/camel-pop3-folder.c (get_message_by_number): Use construct_from_stream instead of set_input_stream(). * camel-simple-data-wrapper-stream.c (camel_simple_data_wrapper_stream_construct): REmoved the destroy callback code. (wrapper_destroy_cb): Removed. * camel-simple-data-wrapper.h: Add prototype for _construct() method. * camel.c: Include unicode.h to kill a warning. * camel-data-wrapper.h (CameldataWrapperClass): Removed construct_from_stream virtual method. Removed get/set input stream. * data-wrapper-repository.[ch]: Removed&from build. Obsoleted? The justification as is follows: It is mixing storage protocol/format with message architecture. It really just doesn't serve any purpose, as each medium implementor will have to have its own type->handler mapping, and the only current implementor, mimepart has a very simple structure and no need for this. * camel-medium.c (write_to_stream): Moved here from most of the stuff in camel-mime-part. Well, the MEDIUM is the one that knows what the headers are, and the content is, let it write it out. * camel-mime-part-utils.c (camel_mime_part_construct_content): Copied from camel-mime-part.c, removed handling of message followon state (moved to camel-mime-message). (camel_mime_part_construct_content_from_parser): Renamed from construct_content. (camel_mime_part_construct_headers_from_stream): (camel_mime_part_construct_content_from_stream): (camel_mime_part_store_stream_in_buffer): Removed. Replaced by the new construct from parser stuff. * camel-mime-message.c (construct_from_parser): Do construct_from_parser for mime-message. (_write_to_stream): Set the mime-version header for medium to write out, rather than writing it out ourselves. * camel-data-wrapper.c (set_mime_type_field): Ref the content_field when we get it? (construct_from_stream): Removed. (camel_data_wrapper_construct_from_stream): Changed to a helper function, creates a mime_parser, and constructs from that. (set_input_stream): Removed. (camel_data_wrapper_set_input_stream): Removed. (get_input_stream): Removed. (camel_data_wrapper_get_input_stream): Removed. * camel-mime-parser.c (camel_mime_parser_unstep): New function. Cause a subsequent call to mime_parser_step() to return the same state over again. * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Initial test code using the mime parser to construct the message. (_get_message_by_uid): Use construct_from_stream() instead of creating our own parser. * camel-mime-part.c (construct_from_parser): part constructor. (camel_mime_part_construct_content): Basically a simpler replacement for the datawrapper repository. (camel_mime_part_init): Set the default type to text/plain. (camel_mime_part_construct_content): Removed to camel-mime-part-utils.c (my_get_output_stream): Removed. The streeam is in the data-wrapper. (my_get_content_object): Removed. The content object is stored in the medium. If none is there, the object wasn't created properly. (my_write_content_to_stream): Removed. The content object is the one that knows how to write itself out!!!!!!!! (my_write_to_stream): Remove the base header writing stuff - has been moved to camel-medium, where it belongs. This can just be used to check for mandatory headers. (my_construct_from_stream): Removed. (my_set_input_stream): What the hell, i'll remove this too. Nobody seems to understand how it differs from create from stream, and they both seem to serve the same purpose ... * camel-simple-data-wrapper.c (construct_from_parser): Initial implementation of a content constructor. (construct_from_stream): Removed! Job taken over by construct_from_parser. * camel-multipart.c (construct_from_parser): Multipart construction routine. (camel_multipart_init): Set the default multipart type to multipart/mixed. Duh, no subtype is not allowed anyway. (set_input_stream): REmoved. Replaced by construct_from_parser. 2000-04-22 Dan Winship * camel-multipart.[ch]: clean, document, etc. (camel_multipart_init): pick a prettier default boundary. Still need to deal with the larger problem 2000-04-22 NotZed * camel-mime-message.h (struct _CamelMimeMessage): Removed send_date, and received_date, and replaced it with a time_t 'date' (this is what the header is called), and date_offset to store the GMT offset of the date. * camel-mime-message.c (camel_mime_message_set_from): Update raw header as we go. (_set_from): Removed. (_get_from): Removed. (camel_mime_message_get_from): Moved implementation here. (camel_mime_message_get_subject): Move implementation here. (_get_subject): Nuked. (camel_mime_message_set_subject): Handle utf-8 input, and also update raw header when changed. (_set_subject): Removed. (_set_received_date): Removed. (camel_mime_message_set_received_date): Removed. (_get_received_date): Removed. (camel_mime_message_get_received_date): Removed. (_get_sent_date): Removed. (camel_mime_message_get_sent_date): Removed. (camel_mime_message_get_date): New function to get the date as a time_t/offset. (camel_mime_message_set_date): Set the date as a time_t/offset. (camel_mime_message_get_date_string): Get the date as a string. (camel_mime_message_init): Initialise the current date as 'CMAEL_MESSAGE_DATE_CURRENT'. (_set_reply_to): Removed. (camel_mime_message_set_reply_to): Moved implementation here. This is still broken, reply-to can have multiple addresses. (_get_reply_to): Removed. (_set_field): Removed, no longer used anywhere. (_get_field): Also removed. (_init_header_name_table): Add the Date header. (process_header): Also handle snooping of Date header here. * camel-stream-filter.c (finalise): Unref the source stream on finalise, and also call the parent class (oops). * camel-mime-parser.c (camel_mime_parser_state): New function to get the current parser state. (camel_mime_parser_stream): Allow you to get the stream back from the mime_parser. (camel_mime_parser_fd): Alternative to allow you to get the fd back from the mime_parser. (folder_scan_init_with_stream): Properly ref/unref the stream. (folder_scan_close): Properly unref the stream/close the fd on exit. (folder_scan_init_with_fd): Close the old fd if there is one. * camel-data-wrapper.c (camel_data_wrapper_construct_from_parser): New method, construct a data wrapper from an initialised parser. (construct_from_parser): Empty implementation. * providers/mbox/camel-mbox-summary.c (message_struct_new): Convert subject line to unicode, before storing in the summary. (strdup_trim): Removed, no longer needed. * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Ref the folder after setting it in the new message. * camel-mime-part.c (my_set_content_object): Have the headers follow the content-type change here too. (my_write_to_stream): Dont write content-type here, automatically stored in the headers ... (my_write_to_stream): Use header_disposition_format() to format the content-disposition header. (my_write_to_stream): Removed old code, all headers are now stored in the camel-medium level, always. Need to do the same with camel-mime-message i suppose ... (my_write_to_stream): Write the content using the parent class, not some weird function. (camel_mime_part_class_init): Dont override get_output_stream. (camel_mime_part_encoding_from_string): Bleh, make it case-insensitive. * camel-mime-utils.c (header_content_type_is): Handle empty types. (header_encode_string): Start of an implementation of the rfc2047 encoder. It does iso-8859-1, and us-ascii, and utf-8 (others get tricky *sigh*) (rfc2047_encode_word): Convert a single word/string into rfc2047 encoding. (quoted_encode): Different quoted-printable encoding for rfc2047 encoding of headers. * gmime-content-field.c (gmime_content_field_write_to_stream): Use header_content_type_format() to format it. 2000-04-21 NotZed * camel-mime-utils.h: Add prototype for header_param_list_free. * camel-recipient.c: New function to remove all the types of a recipient list. I think this whole object needs a major review. * camel-mime-message.c (camel_mime_message_class_init): Removed parse_header_pair override, override add_header instead. (_parse_header_pair): Renamed to add_header. (remove_header): Add this method, to make sure we keep upto date with removed headers too. (_set_field): If given a NULL value, clear it out. (_set_recipient_list_from_string): Constify. (set_header): Override set_header from camel_medium. (process_header): Local function to handle set/add/remove of each header we know about. * camel-mime-part.c (camel_mime_part_class_init): Removed parse_header_pair setup. (my_parse_header_pair): Moved into add_header(), removed. (my_set_disposition): Allow a NULL disposition to clear it. (my_set_content_id): Allow NULL content id to clear it. (remove_header): Track removed headers. (my_set_description): Allow NULL description to clear it. (my_set_content_MD5): Make sure we copy the md5 value, and allow a NULL value to reset it. (my_set_filename): Copy the filename. (my_set_header_lines): Removed. Nothing uses it, it doesn't actually serve any purpose. (camel_mime_part_set_header_lines): Ditto. (my_get_header_lines): Ditto. (camel_mime_part_get_header_lines): Ditto. (camel_mime_part_class_init): Remove *_header_lines setup. (camel_mime_part_init): Remove header_lines init. (my_finalize): Remove header_lines finalise. (my_write_to_stream): Write the headers here. This is just WRONG, camel_medium should be doing this. (my_get_output_stream): Kill a warning. (camel_mime_part_encoding_to_string): Ditto. (camel_mime_part_set_description): Unvirtualiase, use add_header() to do the processing. (my_set_description): Removed. (set_disposition): Renamed from my_set_disposition. (camel_mime_part_get_description): Get the descriptionf rom the get_header method. (my_get_description): Removed. (my_set_filename): Removed. (camel_mime_part_get_filename): Get the parameter from the disposition. (camel_mime_part_encoding_from_string): Handle NULL string. (camel_mime_part_init): Remove reference to filename. (my_finalize): Dont free filename. * camel-mime-part.h (CamelMimePartClass): Removed parse_header_pair() method, it doesn't add anything that add_header() can't be used for. (CamelMimePartClass): Remove *_header_lines methods. (struct _CamelMimePart): Remove header_lines list. (struct _CamelMimePart): Removed filename attribute. * camel-medium.c (camel_medium_init): Init headers to null, not a hashtable. (add_header): Append the headers as a list. (remove_header): Remove headers as a list. (get_header): Likewise for lookup. (free_header): Removed, no longer needed. (finalize): Free headers using header_raw_clear(). (camel_medium_set_header): New function, to reset and override all values of a header with a new value. * camel-medium.h (struct _CamelMedium): Changed to use a header_raw struct rather than a hash table, to store headers (many headers can occur multiple times). * camel-mime-utils.c (header_raw_find_next): New function, allows you to find multi-valued header fields. (header_disposition_format): New function to format/create content-disposition header string. (header_param_list_format_append): Function to format parameter lists into a GString. (header_content_type_format): Function to format content-type into a usable format. (header_set_param): allow NULL value to remove the parameter. (decode_token): Renamed from header_decode_token. (header_decode_token): New interface for external use. (quoted_decode): Made static to kill annoying warnings. (g_strdup_len): Killed, replaced with calls to g_strndup(). (rfc2047_decode_word): Made static to kill warnings. (decode_coded_string): Terminated. (g_string_append_len): Made static to kill warnings. (header_decode_text): Made static to kill warnings. (header_decode_text): Constify. (rfc2047_decode_word): Constify. (header_param): Constify. (header_content_type_new): Copy the type/subtype strings. (header_param_list_decode): Made static. (header_param_list_format_append): Made static. (quoted_decode): Constify. (g_string_append_len): Constify. (header_token_decode): New function to decode a single token. * providers/mbox/camel-mbox-summary.c (header_write): Append a trailing \n when writing headers. (strdup_trim): Killed a warning. (camel_mbox_summary_set_uid): Make sure the next uid is at least 1 higher than any existing one. (header_evolution_decode): Use header_token_decode to get the token. * camel-mime-parser.c (folder_scan_header): Strip the trailing \n of the end of all header lines. 2000-04-20 NotZed * providers/mbox/camel-mbox-utils.[ch]: Removed. * providers/mbox/camel-mbox-parser.[ch]: Removed. Removed references to it. 2000-04-20 Dan Winship * camel-mime-utils.c (rfc2047_decode_word): use libunicode iconv functions rather than libc ones (since libc might not have them). (header_decode_date): add autoconfiscation on timezone code * camel.c (camel_init): call unicode_init () 2000-04-20 NotZed * providers/mbox/camel-mbox-summary.c (message_struct_new): Trim leading/trailing spaces off the raw headers. * MERGE NEW_PARSER branch into HEAD, fixed conflicts. * gmime-content-field.c (_print_parameter): Duh, removed again (@@#$@ cvs merge). * camel-mime-utils.c (header_content_type_is): Constify. (header_content_type_unref): Killed a couple warnings. * camel-folder.c (_init): Removed more log crap. * providers/Makefile.am (SUBDIRS): Removed nntp, pending fixes for summary changes. * providers/mbox/camel-mbox-folder.c (_get_message_by_number): Fixed for new summary interface. Added a warning for using this broken api. (_get_message_by_uid): Fixed for message new with session vanishing. 2000-04-19 Dan Winship * camel-simple-data-wrapper-stream.c (camel_simple_data_wrapper_stream_get_type): This is a subtype of CamelSeekableStream, not CamelStream. * camel-seekable-substream.c: clean up a lot. (eos): When testing for end-of-stream, reset the parent position before testing if it is at end-of-stream, since either (a) it may have been seek'ed to eos by someone else, or (b) we may have been seek'ed away from eos and it hasn't been synced yet. * camel-medium.[ch] (camel_medium_add_header): const poison. (Belatedly goes with my change of 2000-02-23.) (camel_medium_init): Use g_strcase_{hash,equal} on the header array. 2000-04-18 Dan Winship * camel-mime-part.c (my_set_input_stream): * camel-data-wrapper.c (set_input_stream, set_output_stream): do better reference counting of streams so they actually go away when they should. * camel-log.[ch], *: Nuke camel log stuff. Replace calls to CAMEL_LOG_WARNING with calls to g_warning. * camel-data-wrapper.[ch]: * camel-simple-data-wrapper.[ch]: * camel-medium.[ch]: Clean, polish, document. Most of the gtk-doc comments added to camel-data-wrapper.c note serious problems that need to be fixed. 2000-04-17 Dan Winship * camel-mime-message.[ch]: Remove the "session" field from CamelMimeMessage. Nothing uses it, about half of the existing calls to camel_mime_message_new_with_session pass NULL, and there's no obvious reason for it to be there. * providers/MH/camel-mh-folder.c: * providers/maildir/camel-maildir-folder.c: * providers/mbox/camel-mbox-folder.c: * providers/mbox/camel-mbox-utils.c: * providers/nntp/camel-nntp-folder.c: * providers/pop3/camel-pop3-folder.c: Use camel_mime_message_new instead of camel_mime_message_new_with_session. * camel-session.c (get_store_for_protocol_with_url): Set the exception if no provider is found. * camel-url.c: Add code to encode and decode %-escapes in URLs, and do some additional correctness-checking on URL syntax. From Tiago Antào with modifications by me. 2000-04-14 Chris Toshok * providers/Makefile.am (SUBDIRS): add nntp 2000-04-14 Christopher James Lahey * providers/mbox/camel-mbox-folder.c: Fix switch statement. 2000-04-14 Chris Toshok * providers/nntp/camel-nntp-folder.c (_exists): always return TRUE for now. we need to check the server response to make sure the group exists. (_get_message_by_uid): make sure to account for the \n we add to the string after every line. * providers/nntp/camel-nntp-utils.c (get_XOVER_headers): function to get the headers using the XOVER command. (get_HEAD_headers): function to get the headers using the HEAD command on each message. slooooooow. (camel_nntp_get_headers): make this function use either XOVER or HEAD versions depending on whether or not the server extension is present. 2000-04-14 Dan Winship * camel-formatter.[ch]: This didn't belong in Camel. Move to mail/ * Makefile.am, camel-types.h: remove references to camel-formatter. 2000-04-12 Matt Loper * camel-folder-pt-proxy.c (_folder_open_cb): Print warning message for broken function. (_folder_close_cb): Same. 2000-04-12 Miguel de Icaza * Makefile.am (pthread_SRC): Use correct names for the pthread source variables. 2000-04-10 Dan Winship * providers/pop3/camel-pop3-store.c (pop3_connect): fix various bugs in APOP code (still untested) and some of the error cases. * camel-provider.h: Clarify what provider.protocol, provider.name, and provider.description should be. * providers/mbox/camel-mbox-provider.c: * providers/pop3/camel-pop3-provider.c: * providers/sendmail/camel-sendmail-provider.c: * providers/smtp/camel-smtp-provider.c: update protocols, names, and descriptions * providers/mbox/camel-mbox-folder.c (_get_message_by_number): implement get_message_by_number for the mail fetch code. 2000-04-09 Jeffrey Stedfast * providers/smtp/camel-smtp-transport.c: reformatted to fit the standard indent format used by helix code 2000-04-09 Dan Winship * camel-movemail.c: New file with new function to dot-lock an mbox file and copy it to a safe private directory. 2000-04-08 Christopher James Lahey * providers/smtp/.cvsignore: Added a .cvsignore file. 2000-04-08 Dan Winship * providers/sendmail/camel-sendmail-transport.c (_send_internal): actually record the pid returned by fork(). Noticed by clahey. * providers/smtp/camel-smtp-transport.c: #include for MAXHOSTNAMELEN. (This is a stopgap: some of the uses of MAXHOSTNAMELEN are wrong anyway...) 2000-04-07 Jeffrey Stedfast * providers/smtp/camel-smtp-transport.c: fixes to numerous bugs; should now build fine. * providers/Makefile.am: Readded smtp now that smtp builds without error. 2000-04-20 NotZed * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_next_uid): Public function to get the next uid, makes sure its saved to disk too. * camel-mime-part.c (my_finalize): Fix disposition crap with a real disposition. (my_set_disposition): Likewise. (my_get_disposition): And here. (my_write_to_stream): And here, needs more cleanup. * providers/mbox/camel-mbox-folder.c (_append_message): Assign a new uid at this point. * gmime-content-field.c (gmime_content_field_write_to_stream): Make something up if we have an invalid/missing content type (i.e. text/plain). 2000-04-19 NotZed * providers/mbox/camel-mbox-folder.c (_delete): Fixed completely broken switch() syntax, only compiled because errno is a macro on some systems. (_list_subfolders): Likewise. 2000-04-18 NotZed * camel-mime-parser.c (folder_scan_init): init stream to null. * providers/mbox/camel-mbox-summary.c (CAMEL_MBOX_SUMMARY_VERSION): Moved to .c file, incremented. (index_folder): Changed to have index passed via the summary. (decode_string): Do a sanity check on the string size, so we dont visit g_malloc()'s friendly abort(). * camel-folder-pt-proxy.c (camel_folder_pt_proxy_class_init): Removed reference to set_name. (_set_name): Removed. * providers/mbox/camel-mbox-utils.c (parsed_information_to_mbox_summary): Removed. Most of this file is about to be binned. * providers/mbox/camel-mbox-search.c (func_header_contains): Fixes for changes to summary interface. (struct _searchcontext): Remove pointer to message info, get it straight from the mboxsummary. (camel_mbox_folder_search_by_expression): New summary interface. (camel_mbox_folder_search_by_expression): Uh, the summary is not an object anymore (well not yet). * providers/mbox/camel-mbox-folder.c (camel_mbox_folder_class_init): Removed set_name init. (_set_name): Removed. (_open): Call new summary interface. (_close): Use new summary interface. (_create): Removed a summary object leak. (_get_message_count): New summary interface. (_get_uid_list): Use new summary interface. FIXME: this is leaky. (_get_message_by_uid): Use the new summary interface, some cleanup. (_append_message): Totally changed, basically just appends the message directly, ignores the summary (for now), the summary will fix itself up if it needs to. (_check_get_or_maybe_generate_summary_file): Bye bye old code. (summary_get_message_info): Implement get_message_info again, for folder. * camel-folder.c (camel_folder_class_init): Removed set_name setup. (_set_name): Moved contents into _init. (_init): Perform the old functions of set_name here. * camel-folder.h: Removed the set_name internal interface. 2000-04-14 NotZed * providers/mbox/camel-mbox-summary.[ch]: Completely replaced with new code. * Makefile.am (libcamel_la_SOURCES): Removed camel-folder-summary.[ch]. * camel-folder.h (struct _CamelFolder): Removed summary. (struct _CamelFolder): Changed flags to be 1 bit bitfields. * camel-folder-summary.[ch]: Class removed entirely. * camel-folder.c (camel_folder_get_summary): Removed. (camel_folder_summary_get_message_info): Moved from camel-folder-summary.c (camel_folder_summary_get_subfolder_info): Moved from camel-folder-summary.c * camel-mime-parser.c (folder_scan_step): Store the start of headers and start of from in the scan state. (camel_mime_parser_tell_start_headers): Query the start of the headers. (camel_mime_parser_tell_start_from): Query the cached start of from marker. 2000-04-13 NotZed * gmime-content-field.c (gmime_content_field_free): Removed this function. If its too dangerous to use, it shouldn't be here. (gmime_content_field_ref): Also ref the embedded content-type. (gmime_content_field_unref): Ditto to unref it. * camel-mime-utils.h: Add a refcount for content-type header. * camel-mime-utils.c (header_content_type_unref): Implement unref for content-type. (header_content_type_ref): Implement ref for header content type. 2000-04-12 NotZed * gmime-content-field.h: Changed to use a _header_content_type. Added type/subtype back for compatability with clients. * gmime-content-field.c: Basically a total rewrite, and now just a thin wrapper ontop of header_content_type. (_free_parameter): Got rid of it. (gmime_content_field_new): Use header_content_type_* functions. (gmime_content_field_set_parameter): Likewise. (_print_parameter): Blow away. (gmime_content_field_write_to_stream): Get details from the content_type field. Should check if it needs to escape chars in the paramter value. (gmime_content_field_get_mime_type): Likewise. (___debug_print_parameter): Get rid of this rather annoyingly named function. (gmime_content_field_get_parameter): Simplified function. (gmime_content_field_construct_from_string): Fixed this to use a real parser. (gmime_content_field_is_type): New function to test if a type matches. (gmime_content_field_construct_from_string): Track type/subtype from subordinate content_type header struct. * gmime-rfc2047.[ch]: Removed. Unused. * camel-stream-b64.[ch]: Blown away more duplicated code. * Makefile.am: Removed camel-stream-b64.[ch], and gmime-base64.[ch]. * camel-mime-part.c (my_get_content_object): Replaced camel-stream-b64 with camel-stream-filter/camel-mime-filter-basic. (my_write_content_to_stream): Replaced camel-stream-b64 with the camel-stream-filter with an encoder. (my_get_content_object): Also implement quoted-printable decoding. (my_write_content_to_stream): Also implement quoted-printable encoding. (my_get_output_stream): Took out stream-b64 code (nothing's being executed yet anyway). * gmime-base64.[ch]: Blown away. Not used, dont need it. * camel-mime-utils.h: Added offset for this header. Records where it is in the source. * camel-mime-utils.c (header_raw_append_parse): Add offset parameter, to store where the header is stored in the stream. (header_raw_append): Added offset param. (header_raw_find): Return offset, if a pointer supplied for it. (header_raw_replace): Add offset param. (header_content_type_new): New function, to create an empty content type. (header_content_type_set_param): Set a parameter in the content-type. (header_set_param): Generic header parameter setting function. (header_decode_string): Handle NULL input. * camel-mime-parser.c (camel_mime_parser_headers_raw): New function to get access to all the raw headers. (folder_scan_header): Keep track of the header start position, and store it when saving the header. 2000-04-11 NotZed * camel-mime-utils.c: Moved a bunch of printf's to debug. * camel-mime-parser.c: Moved a bunch of printf's to debug. (folder_scan_header): Detect end of each header line using the last scanned char, and not the last scanned position. * camel-mime-filter-index.[ch]: Indexing filter. Indexes unicode sequences into ibex files. 2000-04-09 NotZed * camel-mime-part.c: Dont include gmime-base64.h * camel-mime-filter-charset.c (complete): Implement the completion function. * camel-mime-parser.c (folder_scan_step): If we get to the end of the body data, check any filters for outstanding completion data. (camel_mime_parser_scan_from): Set whether we scan for "From " headers or not. * camel-stream-filter.c (do_read): If we get to end of stream on the source, then call the filtering completion function to see if we have any more data to return. * camel-mime-filter-basic.c (filter): Implement quoted printable encoding and decoding filters. (complete): And the complete function as well. * camel-mime-utils.c (base64_encode_close): Also take an input buffer, allow closing of filters. (quoted_encode_step): First cut, simple quoted-printable encoder. Doesn't handle trailing spaces/tabs on end of line properly yet. (quoted_encode_close): Complete a quoted-encoding. (is_qpsafe): New type check, for quoted-printable safe characters (that do not need encoding). Thats all bits used in the type table! Rebuilt the types table. (header_content_type_is): Checks a content type against at type/subtype match. (header_content_type_param): Handle NULL content type pointer. 2000-04-08 NotZed * camel-mime-filter-basic.c (filter): Implement the base64 encoder. Problem is, there is no way to know when to close it. Close/Reset will have to provide the same args as filter, so it can flush remaining data *sigh* * camel-mime-utils.c (base64_encode_step): A rather complex base64 encoder, fast? (base64_step_close): Companion function to finish off the base64 sequence. * camel-mime-part.c (my_write_content_to_stream): Changed to use camel_stream_write_to_stream(). * camel-stream.[ch] (camel_stream_write_to_stream): From camel_stream_b64_write_to_stream(). Fixed some infinite loop bugs with error conditions. * camel-stream-b64.[ch] (camel_stream_b64_write_to_stream): Removed. This has nothing to do with stream-b64, so i've moved it to CamelStream. * camel-mime-utils.h: Add a comment about refcounting header_content_type struct. * Makefile.am: Added camel-stream-filter*.[ch]. * camel-stream-filter.[ch]: Class to implement a generic (multipass) filter ontop of a stream. Only implements a read-only stream. * camel-mime-parser.c (camel_mime_parser_filter_add): Ref the filter we just added. * Makefile.am: Added camel-mime-filter*.[ch]. * camel-mime-filter-charset.[ch]: A filter to preform character set conversion (uses unicode_iconv). * camel-mime-filter-save.[ch]: A simple filter which will save all data directly to a file or file descriptor. * camel-mime-filter-basic.[ch]: Implements the basic mime filters, base64 and quoted-printable decoding (encoding not implemented yet). * camel-mime-filter.[ch]: A filtering class, which can filter streams of data without having to copy them. Simpler than stream classes, and can be plugged into a single stream class (when i write it). 2000-04-07 Dan Winship * providers/pop3/camel-pop3-store.c (pop3_connect): Clarify error messages. (finalize): fix a bug in camel_exception usage (pop3_connect): Remember the password after asking for it the first time. 2000-04-07 NotZed * Makefile.am: Added camel-mime-parser/camel-mime-utils. * camel-mime-parser.c: Fast mime parser. * camel-mime-utils.c: Mime utility functions, and email header parsers. 2000-04-07 NotZed * providers/Makefile.am: Removed smtp for now, its a long way from building. * providers/smtp/Makefile.in: Removed file that shouldn't have been checked in. 2000-04-06 Matt Loper * camel-folder-pt-proxy.c (_get_full_name): Remove exception param from get_full_name() called, since get_full_name() was changed to not have an exception in the last param (see dan's notes below). (_get_name): same. 2000-04-06 Dan Winship * camel-store.[ch]: Reorganize the folder-fetching methods and implement a folder cache so that multiple requests for the same folder will yield the same CamelFolder object (as long as it remains active). Includes some code to remove no-longer-active folders from the cache, but it doesn't get used since nothing is ever unref'ed in Camel right now... * providers/mbox/camel-mbox-store.c: * providers/pop3/camel-pop3-store.c: update for CamelStore changes. * camel-folder.[ch]: Remove the (unused) CamelException argument from camel_folder_get_name and camel_folder_get_full_name. (camel_folder_set_name): make this go away since changing a folder's name after it has been created could result in it conflicting with a separately-issued folder. 2000-04-05 Dan Winship * g_url_new really wanted to take a CamelException. So, rename Gurl to CamelURL, g_url_* to camel_url_* (with camel_url_new taking an exception), and url-util.[ch] to camel-url.[ch]. Also force url->port to be numeric and remove camel_service_getport. (I was confused before: the URL RFC says the port must be numeric, so we don't want to do getportbyname.) 2000-04-01 Dan Winship * providers/mbox/camel-mbox-folder.c (_check_get_or_maybe_generate_summary_file): Compare mbox_file_size and mbox_modtime to the results of stat()ing the mbox file, not the summary file. Duh. (_close): Update the summary's mbox_file_size and mbox_modtime before writing it to disk. * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_save, camel_mbox_summary_load): Wow. I must have been tired when I wrote this code. First, the comparison bug above. Second, it was using ntohs and htons instead of ntohl and htonl. Third, I was reading the status flag byte in two different places and thus getting out of sync. Fourth, it was writing out field_length bytes of each header field after having converted field_length to network byte order, resulting in lots of random crap being appended, and the summary files being huge. (Fortunately, since the size/modtime comparison was biffed, the garbage summary read from disk was always immediately discarded.) * providers/mbox/camel-mbox-parser.c (camel_mbox_parse_file): fix an off-by-one error that caused the last-used UID to be reused if the summary file was regenerated. (That one wasn't my fault. :-) 2000-03-31 Dan Winship * camel-stream-mem.c: implement unimplemented methods * gmime-content-field.c (gmime_content_field_construct_from_string): * data-wrapper-repository.c (data_wrapper_repository_get_data_wrapper_type): * camel-simple-data-wrapper.c (my_write_to_stream): * camel-mime-part.c (my_set_input_stream): remove debugging printf()s that no longer seem useful. 2000-03-31 Matt Loper * camel-formatter.c (text_to_html): Added "convert_newlines_to_br" boolean param, to give the option of not converting '\n's to
tags. This way, when we stick stuff in a 
 tag, newlines stay
	newlines.

2000-03-30  Matt Loper  

	* camel-formatter.c (handle_text_plain): Use 
 tag to force
	the use of monospaced fonts.

2000-03-30  Dan Winship  

	* camel-service.c (camel_service_getport): Add a htons in the
	default_number case, and document the fact that the function
	returns the port in network byte order.

	* providers/pop3/camel-pop3-store.c (pop3_connect): Revert
	Miguel's change. The port number bug was actually somewhere
	else, and the IP address copying code was fine already.
	
2000-03-29  Miguel de Icaza  

	* providers/pop3/camel-pop3-store.c (pop3_connect): Add htons
	(port), and only copy 4 bytes for the IP address to prevent a DNS
	attack. 

2000-03-28  Dan Winship  

	* camel-seekable-substream.c
	(camel_seekable_substream_new_with_seekable_stream_and_bounds):
	make this return a CamelStream rather than a
	CamelSeekableSubstream, because that's the way Gtk objects tend to
	work.

	* camel-service.c (camel_service_gethost,
	camel_service_getport): convenience functions to canonicalize
	the host and port values of a service's URL.
	* providers/pop3/camel-pop3-store.c: use them

	* providers/mbox/camel-mbox-folder.c
	(_check_get_or_maybe_generate_summary_file): Make this work when
	the inbox file doesn't yet exist.

2000-03-27  Dan Winship  

	* providers/mbox/camel-mbox-folder.c (_append_message): uncomment
	the call to unlink the temp file: there's no way to tell
	camel_stream_fs to truncate a file, so reusing the same file was
	resulting in junk at the ends of messages.

	* camel-folder.[ch]: add delete_message_by_{number,uid}.

	* providers/pop3/camel-pop3-folder.[ch]: implement
	delete_message_by_uid. Add a close method to do expunging
	of deleted messages if requested.

	* providers/pop3/camel-pop3-store.[ch]: support for
	CamelPop3Folder::close. (You have to close the connection
	in order to expunge the folder, thus the store may be
	connected in the CamelService::is_connected sense when it
	is not actually connected to the server.) Also some bugfixes.

2000-03-27  NotZed  

	* providers/mbox/camel-mbox-folder.c (_append_message): Unref the
	output_stream when done, close doesn't do it.
	(_append_message): Clear all uid's from the appending messages, so
	they are reassigned proper unique id's.

	* gmime-utils.c (get_header_array_from_stream): Actually free the
	header, it is copied elsewhere.

2000-03-26  NotZed  

	* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Added
	folder parameter to function.  Fixed callers.
	(index_message): Index a message as it is assigned a unique id.

	* camel-mime-part.c (my_set_content_id): Make sure we malloc and
	copy the content_id, otherwise *poof*

2000-03-25  NotZed  

	* camel-medium.c (_finalize): Another leak, unref the content if
	finished with it.

	* camel-recipient.c (camel_recipient_table_free): Plug another
	memory leak - actually free the recipient table.

	* camel-mime-message.c (_finalize): Plugged a memory leak with the
	flags table.

	* gmime-utils.c (_store_header_pair_from_string): A simpler, more
	debuggable and functionally identical header extraction function.

2000-03-24  NotZed  

	* gmime-content-field.c (gmime_content_field_set_parameter):
	Remove the hash table entry before freeing its key and data.

2000-03-27  Dan Winship  

	* providers/Makefile.am (SUBDIRS): Add pop3.

	* providers/pop3/camel-pop3-store.c: keep separate input and
	output streams so the output doesn't end up being buffered.

	* providers/pop3/camel-pop3-folder.c (get_message_by_number):
	finish implementing this.

2000-03-27  Michael Meeks  

	* camel-mime-part.c (my_set_disposition): fix so less broken.
	(my_finalize): remove dodgy disposition free.

	* camel-data-wrapper.c (my_set_mime_type_field): unref instead of
	free on mime_type.

2000-03-27  Dan Winship  

	* camel-service.c (camel_service_free_auth_types): new routine to
	free the data allocated by camel_service_query_auth_types.

	* providers/pop3/camel-pop3-store.c (free_auth_types): implement

	* camel-stream-mem.c (camel_stream_mem_new_with_buffer): rename
	camel_stream_mem_new_with_buffer to ..._with_byte_array and add a
	new ..._with_buffer that takes a char * rather than a GByteArray.

	* Remove CamelStreamBufferedFs, since CamelStreamBuffer makes it
	redundant.

2000-03-25  Dan Winship  

	* camel-folder-summary.[ch]: change the CamelFolderSummary
	interfaces to allow partial summary queries (for dealing
	with very large folders). Remove the "extended_fields" from
	CamelFolderInfo and CamelMessageInfo: this is better dealt
	with by subtyping.

	* providers/mbox/camel-mbox-summary.[ch]: Make CamelMboxSummary a
	subclass of CamelFolderSummary. Update interfaces for that. Remove
	the internal/external summary distinction. Remove the (unused) md5
	checksum in the folder summary. Change the summary file format
	(primarily to make it no longer byte-order dependent) and add a
	version number to it so it will be easier to change in the future.
	
	* providers/mbox/camel-mbox-folder.[ch]
	* providers/mbox/camel-mbox-search.c
	* providers/mbox/camel-mbox-utils.c: update for summary changes

	* camel-exception-list.def: add
	CAMEL_EXCEPTION_FOLDER_SUMMARY_INVALID
	
2000-03-23  NotZed  

	* providers/mbox/camel-mbox-provider.c: Added flag to provider
	initialisation, to match changed structure.

2000-03-22  NotZed  

	* camel-folder.[ch]: Added async search api.

	* providers/mbox/camel-mbox-search.c
	(camel_mbox_folder_search_by_expression): Changed to use an
	asynchronous interface.
	(camel_mbox_folder_search_cancel): Cancel function for async
	interface.

2000-03-23  Dan Winship  

	* camel-stream-buffer.c (camel_stream_buffer_read_line): Function
	to read one line of any size from a stream and return it in
	allocated memory.

2000-03-22  Dan Winship  

	* camel-service.c (camel_service_query_auth_types): New function
	to query a service for the authentication protocols it supports.
	* providers/pop3/camel-pop3-store.c (query_auth_types): implement

	* camel-provider.c (camel_provider_scan): New function to
	scan the provider dir and return a list of all providers.

	* providers/pop3/camel-pop3-folder.c: fill this in partially
	* providers/pop3/camel-pop3-store.c: make camel_pop3_command
	return the text after "+OK"/"-ERR" and add a separate
	camel_pop3_get_additional_data to get the message body or
	whatever. Also make them take a CamelPop3Store rather than
	a CamelStreamBuffer.

2000-03-22  Matt Loper  

	* camel-formatter.c (debug): Disabled some useless debug
	messaging.

2000-03-21  Dan Winship  

	* providers/pop3: some initial bits of the POP3 provider, to
	make Matt happy. Incomplete, untested, etc.

2000-03-21  bertrand  

	* providers/mbox/camel-mbox-summary.c 
	(camel_mbox_summary_append_internal_to_external): copy the size field

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): initialize 
	message_info to NULL

	* camel-folder-summary.h: added the size field.

	* providers/mbox/camel-mbox-summary.h: 
	added the received_date field.

	* providers/mbox/camel-mbox-summary.c:
	documented all functions.

	* camel-folder-summary.h: name change and 
	new fields.

	* providers/mbox/camel-mbox-search.c: update to 
	conform to name change in the summary fields.

2000-03-10  bertrand  

	* camel-service.h: cosmetic changes.

2000-03-09  Dan Winship  

	* s/HelixCode/Helix Code, Inc./ in the copyrights

2000-03-07  bertrand  

	* camel-formatter.c (handle_mime_part): 
	plug mem leaks due to bad documentation
	of camel_content_field_get_mime_type
	(print_camel_body_part): idem
	(handle_multipart_alternative): idem

	* gmime-content-field.c (gmime_content_field_get_mime_type): 
	documentation fix.


	* camel-mime-part.c (my_finalize): unref the 
	content_input_stream if any. 

2000-03-06  bertrand  

	* camel-stream-fs.c (_seek): fix a bogus calculation
	in the return position.

2000-03-05  bertrand  

	* camel-session.h: cosmetic fixes.

	* camel-stream-fs.c (_read): 
	(_seek): fixed the current position so that it refers
	to the current position in the stream, not in its parent.

2000-03-04  NotZed  

	* providers/mbox/camel-mbox-search.c
	(camel_mbox_folder_search_by_expression): Ref the summary
	after we have got it.

2000-03-04  bertrand  

	* camel-mime-part.c (my_write_content_to_stream): 
	stream the raw content instead of nothing if the encoding
	is not supported.

	* camel-stream-fs.c (_seek): handle eos more
	properly.

	* camel-formatter.c (get_bonobo_tag_for_object): 
	bonobo-goad-id is the good key to look for. 
	(get_bonobo_tag_for_object): close the  tag.
	(get_bonobo_tag_for_object): the correct syntax for the
	to set a parameter inside an  tag is :
	  
	

2000-03-03  bertrand  

	* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): 
	use set_input_stream instead of construct_from_stream
	to feed the message object. 

	* camel-data-wrapper.c (my_write_to_stream): reset output stream.
	(my_set_input_stream): unref the previous input stream.
	use the set_output_stream for default behaviour.
	(my_set_output_stream): unref previous output stream.

	* camel-mime-part.c (my_write_content_to_stream): reset content
	object output stream.

2000-03-03  NotZed  

	* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Make
	sure we open with create with a creation mask.

2000-03-01  NotZed  

	* camel-mime-part-utils.c
	(camel_mime_part_construct_content_from_stream): DO NOT assert on
	content type, we have fallback code 4 lines below it ... *sigh*

2000-02-29  NotZed  

	* Makefile.am (libcamelinclude_HEADERS): Added camel-stream-buffer
	to build.

	* camel-stream-buffer.[ch]: Generic buffer which can be applied to
	any stream.

2000-03-03  bertrand  

	* camel-formatter.c (handle_image): in the case
	of images, put the content object output stream
	in the url. This allows the message browser
	to show inline images.

	* camel-stream-b64.c (my_read_encode): fixed state
	0 keep value. 

2000-03-02  bertrand  

	* camel-stream-b64.c (my_read_encode): don't forget to 
	set the state to 0 after 3.
	(my_read_encode): don't forget to encode, even in state 3.

	* camel-simple-data-wrapper.c: static functions are prefixed 
	with my_ instead of _
	* camel-multipart.c: static functions are prefixed 
	with my_ instead of _
	(my_write_to_stream): commented.
	(my_write_to_stream): warning in case the boudary is set
	but is a zero length string.

	* camel-mime-part.c (camel_mime_part_encoding_from_string): 
	remove debug trace. 
	
	* camel-mime-part.c: Replaced all static functions
	with name begining with _ by the same name begining
	with "my_" to prevent the possible conflicts 
	with system symbols Dan warned us about. 
	
	* camel-stream-b64.c (camel_stream_b64_write_to_stream): 
	use CamelStreamB64 type for the input stream.

	* camel-mime-part.c (_get_content_object): remove 
	debugging trace
	(_write_content_to_stream): implement the b64 
	encoding the new way (that is using camel_stream_b64)

	* camel-data-wrapper.c (my_write_to_stream): 
	fix implementation so that it writes properly
	to the output stream even.

	* camel-stream-b64.c (camel_stream_b64_write_to_stream): 
	fix implementation. 

2000-02-29  bertrand  

	* camel-stream-b64.c (camel_stream_b64_write_to_stream): new
	utility function. 

	* camel-data-wrapper.c (_write_to_stream): default
	implementation. 

	* gmime-utils.c (_store_header_pair_from_string): 
	revert strange changes. 

	* camel-stream-b64.c (my_read_decode): set eos to true when we
	have read the whole input stream. 
	(my_reset): set eos to FALSE.

2000-02-28  NotZed  

	* camel-mime-part.c (_parse_header_pair): Dont free this either.

	* camel-medium.c (_remove_header): Ugh, dont free the header
	before we actually remove it.
	(_add_header): Ugh, dont free hashtable entries which may be
	duplicated (hash_insert _will_ reference that memory).

	* string-utils.c (string_trim): Trimming a 0-length string is not
	an error.

	* camel-mime-message.c (_parse_header_pair): Fixed very broken
	memory handling of header_name/value.

	* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev):
	Initialise end_of_last_message always.
	(camel_mbox_copy_file_chunk): Stop trying to read if we run out of
	data, rather than looping forever.
	(camel_mbox_write_xev): Use an open flag when opening with create.

	* camel-folder.c (camel_folder_search_by_expression): No, its not
	a fatal error to search on a non-searchable folder, you just dont
	get any matches.
	(_open): Dont open an opened folder (i dont see why this is really
	a bug, but what the hell ...)

	* providers/mbox/camel-mbox-folder.c (_init): Set search cap on.
	(_open): Call parent class to perform open.  Remove folder-open
	check to parent instead.
	(_create): open takes a creation mask, dont use umask to try and
	set the open mode.
	(_delete): Dont bother checking folder==NULL, its already been
	checked on the external interface (changed to an assertion, this
	would have to be a camel bug).
	(_delete_messages): Likewise.
	(_create): Ditto.
	(_init): Dont go and clear all the paths and shit that the parent
	open just setup for us.
	(_delete_messages): Get rid of more umask stuff.
	(_append_message): Make sure we pass file mode to open with create.
	(_append_message): Cleaned up some indenting to make it readable.

	* camel-stream-b64.c (my_read_encode): Fixed a typo.

	* providers/mbox/camel-mbox-search.c: Changed to use e-sexp,
	rather than filter-sexp.

2000-02-28  bertrand  

	* camel-stream-b64.c (my_read_encode): encoding
	filter.

2000-02-23  bertrand  

	* camel-stream-b64.c: changed the __static 
	suffix into a my_ prefix. 
	(camel_stream_b64_set_mode): reset the persistent
	status. 
	(my_read_decode): remove superfluous %
	
	* providers/mbox/camel-mbox-utils.c (camel_mbox_copy_file_chunk): 
	fix exception description message.

2000-02-24  Dan Winship  

	* camel-session.c: Add camel_session_get_transport_for_protocol.

	* camel-transport.h:
	* camel-transport.c: Add an abstract CamelTransport class.

	* providers/sendmail/*: A CamelTransport that uses sendmail
	to deliver mail.

2000-02-24  Dan Winship  

	* camel-folder.c: use CamelExceptions for run-time errors, not
	incorrect code. Don't bother validating that an object exists from
	inside one of its methods, since you couldn't have gotten there if
	it didn't. Fix some code style bugs.

	(_init): Rename init_with_store to init and add parent_folder,
	separator, and name arguments.
	(_set_name): Get separator from self, not parent_store now.

	* camel-store.h:
	* camel-store.c: Remove get/set_separator.

	* providers/mbox/: Update for above.

2000-02-23  Dan Winship  

	* camel-medium.c (_finalize): Free the data in the headers hash
	table.
	(_add_header): g_strdup the header name and value when adding it.

	* camel-mime-part-utils.c
	(camel_mime_part_construct_headers_from_stream): Free the header
	data after calling camel_medium_add_header, since it will have
	g_strdup()ed it itself.

2000-02-22  NotZed  

	* providers/mbox/camel-mbox-search.c: Dont compile by default.

	* providers/mbox/Makefile.am: Fuck off the filter code.

2000-02-22  bertrand  

	* camel-stream-b64.c (read_decode__static): 
	don't read the char if we reached the length
	of the output buffer. Hours lost on this
	%$!@# bug : 3.5

	* camel-folder.c (camel_folder_get_subfolder): 
	(camel_folder_create): 
	(camel_folder_delete): 
	(camel_folder_delete_messages): 
	(camel_folder_list_subfolders): 
	(camel_folder_expunge): 
	(camel_folder_get_message_by_number): 
	(camel_folder_get_message_count): 
	(camel_folder_append_message): 
	(camel_folder_copy_message_to): 
	(camel_folder_get_summary): 
	(camel_folder_get_message_uid): 
	(camel_folder_get_message_by_uid): 
	(camel_folder_get_uid_list): 
	Check folder state (open/close) and raise an
	exception if it is not ok. 
	
	* providers/mbox/camel-mbox-folder.c (_create): 
	create the file and the path with two different
	names.

	* camel-folder.c (_create): handle the case 
	when the folder name starts with '/'

	* camel-exception.c (camel_exception_new): use 
	(void) instead of () in decl.

	* camel-exception.h: cosmetic fixes.

	* camel-exception.c (camel_exception_init): new routine.
	Fix a bug in mail/message-list.c
	

	* camel-folder.h: cosmetic changes.

	* camel-stream-b64.c (reset__static): added a
	reset method. Thanks message-browser to find
	so much bugs :)

	* providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): readd
	Unicode libs.

2000-02-21  bertrand  

	* camel-formatter.c (lookup_unique_id): 
	awful hack to test get_output_stream.
	* camel-stream-b64.[ch] :
	b64 encoding/decoding is now implemented as
	a stream. 
	

2000-02-21  bertrand  

	* camel-seekable-substream.c (_reemit_parent_signal): 
	emit "data_available" when parent stream emits it. 


2000-02-21  NotZed  

	* providers/mbox/Makefile.am: Uh, fixed LIBADD again.  What was
	there was never ever going to work, wasn't it tested?


2000-02-21  Dan Winship  

	* camel-session.h: (struct _CamelSession): Add authenticator.

	* camel-session.c (camel_session_new): Add authenticator.
	(camel_session_query_authenticator): New function to query the
	session authenticator for password, etc, information.

2000-02-21  Dan Winship  

	* camel-session.c: add CamelExceptions to several functions. Use
	camel_session_new to initialize the session and URL fields of
	created CamelStores as appropriate.

	* camel-store.h:
	* camel-store.c
	* camel-service.h:
	* camel-service.c: Move the session and url (and associated
	functions) from CamelStore to CamelService. Add url_flags to
	CamelService so subclasses can specify which URL components
	are mandatory for them.	Add camel_session_new for
	camel_session_get_store* to use.

	* providers/mbox/camel-mbox-folder.c:
	* providers/mbox/camel-mbox-store.c:
	* providers/mbox/camel-mbox-store.h: Update for above changes.

	* camel-exception-list.def: Once camel is being used for real,
	exceptions won't be renumberable. So renumber them now to make
	more room to add exceptions to the various categories later, and
	add a big warning message.

2000-02-20  Dan Winship  

	* providers/mbox/Makefile.am: add libibex back to
	libcamelmbox_la_LIBADD

2000-02-18  NotZed  

	* providers/mbox/camel-mbox-search.h
	(camel_mbox_folder_search_by_expression): Added exception to call,
	and fixed caller.

	* providers/mbox/camel-mbox-search.c
	(camel_mbox_folder_search_by_expression): Major changes, to use
	the sexp evaluator from filter/filter-sexp.c to implement the
	searching.
	(func_body_contains): Changed to support multiple strings in 1
	command (results or'd together)

	* url-util.c (g_url_new): Fixed a typo (colon == 0 isn't right),
	and made it so full url's are absolute pathed (Dan, this is how it
	has to work!).  Also, always include a path part, even if it is an
	empty string.

2000-02-18  Dan Winship  

	* camel/camel-types.h: New header with the typedefs for all camel
	classes. Now the class headers can just include this and the
	header for the parent type. This makes it possible for
	CamelService to include a CamelSession without creating an
	#include loop.

	* camel/*:	
	* composer/e-msg-composer-attachment-bar.h:
	* mail/folder-browser.c:
	* mail/message-list.c: frob #includes to match the new reality

2000-02-17  Dan Winship  

	* camel/camel-service.h:
	* camel/camel-service.c: Make camel-service us a Gurl internally.
	Remove the login/password interfaces and instead provide
	camel_service_connect_with_url. Add CamelExceptions

2000-02-17  bertrand  

	* camel/camel-formatter.c (handle_text_plain): 
	(handle_text_html): use camel_stream_reset instead
	of seek. The formatter should be able to work 
	with all streams, not only seekable streams. 
	In the case where some provider implementation
	would not be able to provide a reset method 
	to their stream, implementors would have
	to find a workaround.

	* camel/camel-session.c (camel_session_new): use
	(void) instean of () in function decl.

	* camel/camel-folder.c: ifdef async operation 
	related code. 

	* camel/camel-seekable-stream.c (_seek): added a warning.
	(_reset): default implementation of reset for seekable
	stream.

	* camel/camel-mime-message.h: set_received_date declaration fix.
	cosmetic changes.

	* camel/providers/mbox/camel-mbox-provider.c (camel_provider_module_init): 
	use (void) instead of ().

	* camel/camel-stream.c (camel_stream_reset): 
	new method for CamelStream.

2000-02-17  Dan Winship  

	* camel/url-util.c (g_url_to_string): New function to convert
	a Gurl back into a char *.

2000-02-17  bertrand  

	* camel/camel-formatter.c (handle_text_plain): 
	revamped so that it uses the output stream
	of the data wrapper
	(handle_text_html): ditto.
	
	
	* camel/camel-simple-data-wrapper.h: 
	* camel/camel-simple-data-wrapper.c (camel_simple_data_wrapper_new): 
	use (void) instead of ().
	(_get_output_stream): simple implementation. 

2000-02-16  bertrand  

	* camel/camel-data-wrapper.c (_set_input_stream): ref input stream
	(_set_output_stream): ref output stream
	(_finalize): unref input and output streams

	* camel/camel-seekable-substream.c (_set_bounds): don't
	seek the begining of the substream.
	(_eos): fix eos condition testing. 
	(_finalize): unref parent stream
	(_init_with_seekable_stream_and_bounds): ref parent stream

	* camel/gstring-util.c (g_string_equal_for_hash): 
	(g_string_equal_for_glist): return type is int.

	* camel/camel.h: 
	* camel/camel.c (camel_init): use (void) 
	instead of ().
	
2000-02-16  NotZed  

	* providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Added
	libfilter to link line (temporarily?).  Required for
	filter-sexp.

2000-02-15  bertrand  

	* camel/camel-multipart.c (_localize_part): 
	this routine replaces the _read_part routine
	and does not store the part in a buffer. 
	(_set_input_stream): use the set_input_stream
	instead of the construct_from_stream.
	each bodypart is given an input stream. 

	* camel/camel-mime-part-utils.c: 
	include the data-wrapper-repository header. 
	(camel_mime_part_construct_content_from_stream): 
	use the set_input_stream instead of the 
	construct_from_stream method. 

	* camel/camel-seekable-substream.c (_set_bounds): 
	cur position is set to 0 not to inf_bound.

2000-02-15  bertrand  

	* camel/camel-mime-part.c: include gmime-base64.h
	various compilation and runtime fixes.
	(_set_input_stream): store the input substream 
	for the content object.

	* camel/camel-data-wrapper.h: declare the 
	set/get function on input/output stream.

	* camel/camel-mime-part.c (_get_content_object): 
	don't use a temporary mem stream. 	

	* camel/camel-seekable-substream.c (_seek): 
	(_eos): 
	(_read): the substream can be unlimited in length

	* camel/camel-data-wrapper.c (camel_data_wrapper_class_init): 
	set the get/set_input/output_stream methods. 	

	* camel/camel-multipart.c (_construct_from_stream): 
	camel_stream_seek -> camel_seekable_stream_seek

2000-02-14  Miguel de Icaza  

	* camel/providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Add
	the unicode libraries as well.

	* camel/camel-provider.c (camel_provider_register_as_module): Add
	error reporting here.  Desire to use Solaris increases.  Hair loss
	in the last two hours: 5,400.

	* camel/providers/mbox/camel-mbox-provider.c
	(camel_mbox_get_provider): Renamed function.

	* camel/camel.h: All include files use camel/ now here.

	* camel/providers/mbox/Makefile.am: Drop all the dynamism from
	Camel, and make this a standard library.

2000-02-14  bertrand  

	* camel/gmime-utils.c (get_header_array_from_stream): use the 
	eos stream method. 
	(gmime_read_line_from_stream): ditto.

	* camel/camel-stream-fs.h (struct ): add the eof field
	cosmetics changes. 

	* camel/camel-stream-fs.c (camel_stream_fs_init): set eof.
	(_read): set eof on end of file.
	(_eos): implemented.

	* camel/gmime-utils.c (get_header_array_from_stream): 
	make a blocking version of the header parser. 
	When the fs stream uses gnome-vfs, this should
	be changed. 
	(gmime_read_line_from_stream): ditto. 

2000-02-11  bertrand  

	* camel/camel-stream-fs.c: 
	everywhere, when using the cur_pos field, do it
	on the CamelSeekableStream object.
	(_seek): small fix. 

	* camel/camel-seekable-stream.c (camel_seekable_stream_seek): 
	s/camel_stream_seek/camel_seekable_stream_seek/g

	* camel/camel-seekable-stream.h: 
	(struct ): added a field to store the
	current position.

	* camel/camel-seekable-stream.c (camel_seekable_stream_get_current_position): 
	New function. Allows to get the current position 
	of a seekable stream.
	

2000-02-13  NotZed  

	* providers/mbox/camel-mbox-search.c: New file, implements the
	search api for mbox folders.

	* providers/mbox/Makefile.am: Link with ibex.

	* camel-folder.c (camel_folder_has_search_capability): Api
	additions.
	(camel_folder_search_by_expression): Ditto.

2000-02-12  NotZed  

	* providers/mbox/camel-mbox-folder.c (_set_name): Setup index
	filename as well.
	(_init_with_store): Init index filename.  Hmm, none of these
	names ever seem to get free'd (FIXME?)

	* providers/mbox/camel-mbox-folder.h: Add index file name.

2000-02-12  NotZed  

	* camel-folder.h: Add folder search functions.

	** Created ChangeLog just for camel **
	 - refer to ../ChangeLog for changes prior to this date.