<chapter id="usage-mail">
  <title>Using Evolution for Email</title>
  <para>
    This chapter, and <xref linkend="usage-mail-organize">, will
      provide you with an in-depth guide to the capabilities of
      Evolution as a mail client.  For information about how to set up
      your mail account, see <xref linkend="config-prefs-mail">.
  </para>
  
  <note>
    <title>If you use IMAP Mail</title>
    <para>
      If you chose IMAP mail during the setup process, you must
      subscribe to your mail folders before you can read mail in
      them. Read <xref linkend="usage-mail-subscriptions"> to find out
      how.
    </para>
  </note>  
  
  <sect1 id="usage-mail-getnsend-read">
    <title>Reading Mail</title>    
    <para>
      Start the mail client by clicking on the
      <guibutton>Inbox</guibutton> icon in the shortcut bar, or by
      selecting a mail folder in the folder bar.  To read a message,
      select it in the message list; if you'd like to see it in its
      own window, double-click on it or press
      <keycombo action="simul">
	<keycap>Ctrl</keycap>
	<keycap>O</keycap>
      </keycombo>.
    </para>

      <tip id="spaceandbs">
	<title>Reading Mail with the Keyboard</title>
	<para>
	  You can click the spacebar to page down while you're reading
	  an email, and press backspace to page up in an email.  This
	  may help to make reading your email faster.
	</para>
      </tip>

    <sect2 id="usage-mail-listorder">
      <title>Sorting the message list</title>
      <para>
	<application>Evolution</application> helps you work by letting you sort
	your email.  To sort by sender, subject, or date, click
	on the bars with those labels at the top of the message
	list. The direction of the arrow next to the label indicates
	the direction of the sort, and if you click again, you'll
	sort them in reverse order. For example, click once on
	<guilabel>Date</guilabel> to sort messages by date from
	oldest to newest.  Click again, and
	<application>Evolution</application> sorts the list from
	newest to oldest. You can also right-click on the message
	header bars to get a set of sorting options, and add or
	remove columns from the message list.  You can find detailed
	instructions on how to customize your message display
	columns in <xref linkend="usage-mail-organize-columns">.
      </para>

      <tip id="view-headers">
	<title>Email Headers</title>
	<para>
	  To look at the complete headers for email messages, select
	  <menuchoice><guimenu>View</guimenu><guisubmenu>Message
	  Display</guisubmenu><guimenuitem>Show Full
	  Headers</guimenuitem></menuchoice>. To see absolutely every
	  bit, choose
	  <menuchoice><guimenu>View</guimenu><guisubmenu>Message
	  Display</guisubmenu><guimenuitem>Show Email Source
	  </guimenuitem></menuchoice>.
       </para>
      </tip>

      <para>
	You can also choose a threaded message view. Select
	<menuchoice> 
	  <guimenu>View</guimenu>
          <guimenuitem>Threaded</guimenuitem> 
	</menuchoice> 
	to turn the threaded view on or off.  When you select this option,
	<application>Evolution</application> groups the replies to a
	message with the original, so you can follow the thread of a
	conversation from one message to the next.
      </para>
      <figure>
        <title>Threaded Mail View</title>
	<screenshot>
	  <screeninfo>Threaded Mail View</screeninfo>
	  <mediaobject><imageobject>
	      <imagedata  format="png" fileref="figures/mail-threaded" srccredit="Aaron Weber">
	    </imageobject></mediaobject>
	</screenshot>
      </figure>

    </sect2>
    
    <sect2 id="usage-mail-getnsend-delete">
        <title>Deleting Mail</title>
        <para>
          Once you've read your mail, you may want to get rid of
          it. 
	To delete a message:
	<orderedlist numeration="arabic">
	  <listitem>
	    <para>
	      Click the message to select it
	    </para>
	  </listitem>
	  <listitem>
	    <para>
	      Press delete button or right click on the message and
	      choose <guilabel>Delete</guilabel>.
	    </para>
	    <note>
	      <title>Why do I still see deleted mail?</title>
	      <para>
		When you press <guibutton>Delete</guibutton> or click
		the trash button, your mail isn't actually deleted,
		but is marked for deletion.  Your email is not gone
		until you have <glossterm
		linkend="expunge">expunged</glossterm> it. When you
		expunge a folder, you remove all the mail that you
		have marked for deletion.
	      </para>
              <para>
                 If you don't like this behavior, select
                 <menuchoice><guimenu>View</guimenu><guimenuitem>Hide
                 Deleted Messages</guimenuitem></menuchoice>.
                 You will only see deleted messages when you look in
                 your <guilabel>Trash</guilabel> folder.
              </para>
	    </note>
	  </listitem>
	  <listitem>
	    <para>
	      Click
	      <menuchoice>
		<guimenu>Actions</guimenu>
		<guimenuitem>Expunge</guimenuitem>
	      </menuchoice>
	      or press
	      <keycombo action="simul">
		<keycap>Ctrl</keycap>
		<keycap>E</keycap>
	      </keycombo>
	    </para>
	  </listitem>
	</orderedlist>
      </para>
      <note>
	<title>Trash is Actually a vFolder?</title>
	<para>
	   Both local and IMAP Trash folders are actually vFolders that
          display all messages you have marked for later deletion.
          For more information about vFolders, see <xref
          linkend="usage-mail-organize-vfolders">.  Since emptying
          your trash expunges the messages in your Trash folder,
          choosing <menuchoice> <guimenu>Actions</guimenu>
          <guimenuitem>Empty Trash</guimenuitem> </menuchoice> is the
          same as expunging deleted mail from <emphasis>all</emphasis>
          your folders.
	</para>
      </note>
    </sect2>
    <sect2 id="usage-mail-getnsend-undelete">
      <title>Undeleting Messages</title>
      <para>
	To undelete a message:
	<orderedlist numeration="arabic">
	  <listitem>
	    <para>
	      Select a message you have marked for deletion.
	    </para>
	  </listitem>
	  <listitem>
	    <para>
	      Press <keycombo
	      action="simul"><keycap>Ctrl</keycap><keycap>U</keycap>
	      </keycombo>
	      or choose
	      <menuchoice>
		<guimenu>Actions</guimenu>
		<guimenuitem>Undelete</guimenuitem>
	      </menuchoice>

	    </para>
	    <note>
	      <title>What does Undelete actually do?</title>
	      <para>
                If you have marked a message for deletion, undeleting
		it will unmark it and the message will be removed
		from the Trash folder. However, it can't bring back
		messages that have been expunged.
	      </para>
	    </note>
	  </listitem>
	</orderedlist>
      </para>
    </sect2>
  </sect1>

  <sect1 id="usage-mail-getnsend-get">
    <title>Checking for New Mail</title>
    <para>
      Now that you've had a look around the
      <interface>Inbox</interface>, it's time to check for new mail.
      Click <guibutton>Get Mail</guibutton> in the toolbar to check
      your mail.  If you haven't entered any mail settings yet, the
      <interface>setup assistant</interface> will ask you for the
      information it needs to check your email.
    </para>
    <para>
      The assistant will give you several dialog boxes where you configure:
      <itemizedlist>
	<listitem>
	  <para>
	    Your personal information.
	  </para>
	</listitem>
	<listitem>
	  <para>
	    Your outgoing email server information.
	  </para>
	</listitem>
	<listitem>
	  <para>
	    Your mail account identity name.
	  </para>
	</listitem>
      </itemizedlist>
    </para>
    <para>
      To check your email, press the <guibutton>Check Mail</guibutton>
      button.  If this is your first time checking mail, or you
      haven't asked <application>Evolution</application> to store your
      password, you'll be prompted for the password.  Enter your
      password and your email will be downloaded.
    </para>
    <note id="badmailsettings">
      <title>Can't Check Mail?</title>
      <para>
	If you get an error message instead of mail, you probably need
	to check your network settings.  For more information on your
	network seeings, refer to <xref linkend="config-prefs-mail">,
	or ask your system administrator.
       </para>
     </note>

    <tip>
      <title>Sharing Mailboxes with Other Mail Programs</title>
      <para>
	If you want to use <application>Evolution</application>
	and another email client, such as
	<application>Mutt</application>, at the same time,
	here's how:
	<orderedlist numeration="arabic">
	  <listitem>
	    <para>
	      Download your mail in the other application as
	      you would normally.
	    </para>
	  </listitem>
	  <listitem>
	    <para>
              Select
	      <menuchoice><guimenu>Tools</guimenu><guimenuitem>Configure</guimenuitem></menuchoice>,
	      click the <guibutton>Mail Accounts</guibutton> button,
	      and pick the account you'd like to use to share
	      mail. You may want to create a new account just for this
	      source of mail.
	    </para>
	  </listitem>                     
	  <listitem>
	    <para>
	      Under the <guilabel>Receiving Mail</guilabel>
	      tab, select the type of mail file that your
	      other mail application uses, and then enter the
	      full path to that file.
	    </para>
	  </listitem>
	  <listitem>
	    <para>
	      Click the <guibutton>OK</guibutton> button.
	    </para>
	  </listitem>
	</orderedlist>
      </para>
    </tip>


<!-- NOT FOR 1.0
       <sect2 id="usage-mail-getnsend-get-news">
	  <title>Using Evolution for News</title>
	<para>
	  Newsgroups are so similar to email that there's no reason not
	  to read them side by side.  If you want to do that, add a
	  news source to your configuration (see <xref
	  linkend="config-prefs-network-news">). The news server will
	  appear as a remote server, and will look quite similar to an
	  IMAP folder.  When you click <guibutton>Get Mail</guibutton>,
	  <application>Evolution</application> will also check for news
	  messages.
	</para>
	</sect2>
-->

     <sect2 id="usage-mail-getnsend-get-attach">
      <title>Working with Attachments and HTML Mail</title>
      <para>
	If someone sends you an <glossterm linkend="attachment">attachment</glossterm>,
	a file attached to an email,
	<application>Evolution</application> will display the file
	at the bottom of the message to which it's attached.  Text,
	including HTML formatting and embedded images, will appear
	as part of the message, rather than at the end of the
	message as an attachment.
      </para>

     <sect3 id="usage-mail-getnsend-get-attach-actions">
	<title>Saving or Opening Attachments</title>
	<para>
	  If you get an attachment with an email message,
	  <application>Ximian Evolution</application> can help you save
	  it or open it with the appropriate applications.
	</para>
	<para>
	  To save an attachment to disk:
	  <orderedlist numeration="arabic">
	    <listitem>
	      <para>
		Click the downward pointing arrow on the attachment icon
		and select <guimenuitem>Save to Disk</guimenuitem>.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Choose a location and name for the file.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Click <guibutton>OK</guibutton>.
	      </para>
	    </listitem>
	  </orderedlist>
	</para>
	
	<para>
	  To Open an Attachment in a Program:
	  <orderedlist numeration="arabic">
	    <listitem>
	      <para>
		Open the mail message with the attachment you want to read.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Click the arrow next the attachment icon.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Select the program you'd like to use. It will start up
		and open the document.
	      </para>
	    </listitem>
	  </orderedlist>
	</para>
	<para>
	</para>
      </sect3>
      
      <sect3 id="usage-mail-getnsend-get-attach-html">
	<title>Inline Images in HTML Mail</title>
	<para>
	  When someone sends you HTML mail that includes an image in
	  the body of the message (for example, the welcome message in your
	  Inbox when you first start <application>Ximian
	   Evolution</application>) <application>Evolution</application>
	  will display the image inside the message.  You can create
	  messages like this by using the
	  <menuchoice>
	    <guimenu>Insert</guimenu>
	    <guimenuitem>Image</guimenuitem>
	  </menuchoice>
	  tool in the message composer.
	</para>

      <para>
         If the image isn't included in the message, but is
         a link to an image, <application>Evolution</application> can
         download the image from the Internet for you.  By default,
         <application>Evolution</application> will not display the image.
         This is because remotely hosted
         images can be slow to load and display, and can even be used
         by spammers to track who reads their email.  Having images
         not load automatically helps protect your privacy.
      </para>
      <para>
	 If you want the images to load for one message, select 
	 <menuchoice>
	   <guimenu>View</guimenu>
	   <guisubmenu>Message Display</guisubmenu>
	   <guimenuitem>Load Images</guimenuitem>
         </menuchoice>.  

         If you want <application>Ximian Evolution</application> to
         load remotely hosted images more often, select the
         <menuchoice>
	   <guimenu>Tools</guimenu>
	   <guimenuitem>Configure</guimenuitem> </menuchoice> menu
	   item and click the <guibutton>Mail Preferences</guibutton>
	   button in the configuration tool. There, select the
	   <guibutton>HTML Mail</guibutton> tab and choose
	   <guilabel>Load images if sender is in
	   addressbook</guilabel> or <guilabel>Always load images off the net</guilabel>
      </para>
      <note id="http-proxy">
	<title>Loading Images from the Net through an HTTP Proxy</title>
        <para>
           If you use an HTTP proxy,
           <application>Evolution</application> must be able to find
           it through the <systemitem>gnome-vfs</systemitem> subsystem
           before it can load images from the Internet.  This is also
           the case if you wish to access weather and news information
           through the Summary tool. You can tell the GNOME Virtual
           File System about your HTTP proxy in one of three
           ways. From easiest to most complicated, they are:
            <variablelist>

	      <varlistentry>
	      <term>Configure it with the Gnome-VFS Proxy Configuration Tool</term>
	      <listitem>
		<para>
                  Ximian ships a small utility called the Gnome-VFS
                  Proxy Configuration Tool, which you can run from the
                  <guimenu>Desktop Preferences</guimenu> menu or with
                  the <command>gnome-vfs-proxy-capplet</command>
                  command. All it does is let you tell GNOME what your
                  HTTP proxy is:
         <orderedlist numeration="arabic">
		    <listitem>
		      <para>
	               Run the configuration tool with the
	               <command>gnome-vfs-proxy-capplet</command>
	               command or by selecting it from the
	               <guimenu>Desktop Preferences</guimenu> menu.
	               </para>
		    </listitem>
      		    <listitem>
		      <para>
                          Enter the name of your HTTP proxy where
                          indicated. If you are not sure what it is,
                          ask your system administrator.
	               </para>
		    </listitem>
      		    <listitem>
		      <para>
                        Click OK. You're done.
	               </para>
		    </listitem>
		  </orderedlist>
                </para>
	      </listitem>
	    </varlistentry>

	      <varlistentry>
	      <term>Configure it with Nautilus</term>
	      <listitem>
		<para>
                 <orderedlist numeration="arabic">
		    <listitem>
		      <para>
			Open a Nautilus window.
	               </para>
		    </listitem>
      		    <listitem>
		      <para>
	                 Select <menuchoice>
			  <guimenu>Preferences</guimenu>
			  <guimenuitem>Edit Preferences</guimenuitem>
			</menuchoice>.
	               </para>
		    </listitem>
      		    <listitem>
		      <para>
			Go to the <guilabel>Navigation</guilabel> tab.
	               </para>
		    </listitem>
      		    <listitem>
		      <para>
			Click the <guilabel>Use HTTP Proxy</guilabel>
			checkbox and enter the location of your HTTP
			proxy in the <guilabel>Location</guilabel> field.
	               </para>
		    </listitem>
		  </orderedlist>
                </para>
	      </listitem>
	    </varlistentry>
	    <varlistentry>
	      <term>Configure it with gconftool or gconf-editor </term>
	      <listitem>
	      <para>
                  There are two tools you can use to edit the GNOME
                  configuration system directly:
                  <command>gconftool</command> is a command-line
                  application for experts only, and
                  <application>gconf-editor</application> is a
                  graphical tool that is easier to use, but is still
                  strictly a power-user application. Both programs are
                  beyond the scope of this manual.  For more
                  information about gconftool and gconf-editor, read
                  their man pages.
                </para>
	      </listitem>
	    </varlistentry>
	  </variablelist>
         </para>
      </note>
     </sect3>
    </sect2>
  </sect1>

  <sect1 id="usage-mail-getnsend-send">
    <title>Composing New Email Messages</title>
    <para>
      You can start writing a new email message by selecting
      <menuchoice>
	<guimenu>File</guimenu>
	<guisubmenu>New</guisubmenu> 
	<guimenuitem>Mail Message</guimenuitem>
      </menuchoice>, or by pressing the
      <guibutton>Compose</guibutton> button in the Inbox toolbar.
      When you do so, the <interface>New Message</interface> window
      will open, as shown in <xref
				   linkend="usage-mail-newmsg-fig">.
    </para>

<!--   ==============Figure=================================== -->
      <figure id="usage-mail-newmsg-fig">
        <title>New Message Window</title>
        <screenshot>
          <screeninfo>Evolution Main Window</screeninfo>
          <mediaobject><imageobject><imagedata fileref="figures/newmsg" format="png" srccredit="Aaron Weber">
        </imageobject></mediaobject>
        </screenshot>
      </figure>
<!-- ==============End of Figure=================================== -->

      <para>
      Enter an address in the <guilabel>To:</guilabel> field.  If you
      wish, enter a subject in the <guilabel>Subject:</guilabel>, and
      a message in the box at the bottom of the window.
      Once you have written your message, press
      <guibutton>Send</guibutton>.
    </para>

      <sect2 id="usage-mail-getnsend-send-delay">
        <title>Sending Composed Messages Later</title>
        <para>
           <application>Evolution</application> will send mail
           immediately unless you tell it to do otherwise by selecting
           <menuchoice> <guimenu>File</guimenu> <guimenuitem>Send
           Later</guimenuitem></menuchoice>.  This will add your
           messages to the <guilabel>Outbox</guilabel> queue.  The
           "Send Later" feature is particularly useful if you use a
           modem to connect to the Internet and pay per-minute
           charges: you can remain offline until you need to send
           mail, then connect and send all your mail at once.  Mail in
           the outbox is sent when you click
           <guibutton>Send/Receive</guibutton> in the main window.
        </para>
        <para>
           To learn more about how you can specify message queue and
           filter behavior, see <xref linkend="config-prefs-mail">.
        </para>
	  <note>
            <title>Working Offline</title>
            <para>
	      Select
	      <menuchoice><guimenu>File</guimenu><guimenuitem>Work
	      Offline</guimenuitem></menuchoice> to have
	      <application>Ximian Evolution</application> disconnect
	      from the Internet while you work. When you want to
	      reconnect, choose
	      <menuchoice><guimenu>File</guimenu><guimenuitem>Work
	      Online</guimenuitem></menuchoice>.  Alternativly, you
	      can click the connection button at the bottom left side
	      of the window.
            </para>
         </note>

      <para>
	You can also choose to save messages as drafts or as text
	files. Your options are:
       <itemizedlist>
        <listitem><para>
          Choose
	  <menuchoice>
	   <guimenu>File</guimenu>
	    <guimenuitem>Save Draft</guimenuitem>
          </menuchoice>
          to store your messages in the drafts folder for later
          revision.
       </para></listitem>

       <listitem><para>
         If you'd like to have the message sent later, you
         can choose <guimenuitem>Send Later</guimenuitem>. That way,
         the message will be added to the queue, and you can send a 
         batch of messages all at once.
        </para></listitem>
        
        <listitem><para> 
         If you prefer to save your message as a text file,
         choose <guimenuitem>Save As</guimenuitem> and then choose a
         file name.
           </para>
	  </listitem>
	</itemizedlist>
      </para>
    </sect2>

    <sect2 id="usage-mail-getnsend-send-compose">
      <title>More About Mail Composition</title>
      <para>
        In the next few sections, you'll see how
	<application>Evolution</application> handles advanced email
	features, including large recipient lists, attachments, and
	forwarding.
      </para>
      <sect3 id="usage-mail-getnsend-send-attach">
        <title>Attachments</title>
        <para>
	  To attach a file to your email:
	  <orderedlist numeration="arabic">
	    <listitem>
	      <para>
		Push the attach button in the composer toolbar.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Select the file you want to attach.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Press <guibutton>OK</guibutton>
	      </para>
	    </listitem>
	  </orderedlist>
	</para>
	<para>
	  You can drag a file from your desktop into the composer window to
	  attach it as well.
        </para>
        <para>
	  To hide the display of files you've attached to the
	  message, select <menuchoice>
            <guimenu>View</guimenu> <guimenuitem>Hide
	      Attachments</guimenuitem> </menuchoice>; to show them
	  again, choose <guimenuitem>Show Attachments</guimenuitem>.
        </para>
        <para>
	  When you send the message, a copy of the attached file
	  will go with it.  Be aware that big attachments can take a
	  long time to download.
        </para>
      </sect3>
      
      <sect3 id="usage-mail-getnsend-send-to-types">
	<title>Specifying Recipients for Email</title>
        <para>
	  <application>Evolution</application>, like most email
	   programs, recognizes three types of addressee: primary
	   recipients, secondary recipients, and hidden ("blind")
	   recipients.
         </para>
         <para>
            The simplest way to direct a message is to put the email
            address or addresses in the <guilabel>To:</guilabel>
            field, which denotes primary recipients.  To send mail to
            more than one or two people, you can use the
            <guilabel>Cc:</guilabel> field.
          </para>
          <para>
            Hearkening back to the dark ages when people used
            typewriters and there were no copy machines, "Cc" stands
            for "Carbon Copy."  Use it whenever you want to share a
            message you've written to someone else.
          </para>
          <para>
            <guilabel>Bcc:</guilabel> is a little more complex.  You
            use it like <guilabel>Cc:</guilabel>, but people on the
            <guilabel>Bcc:</guilabel> list are hidden from the other
            recipients of the message. Use it to send mail to large
            groups of people, especially if they don't know each other
            or if privacy is a concern.  If your <guilabel>Bcc:</guilabel> field is absent, click
	    <menuchoice>
	      <guimenu>View</guimenu>
	      <guimenuitem>Bcc Field</guimenuitem>
	    </menuchoice>.
		
          </para>

         <para>
           If you frequently write email to the same groups of people,
           you can create address lists in the Contact Manager, and
           then send them mail as though they had a single address.
           To learn how to do that, read <xref
           linkend="usage-contact-organize-group-list">.
        </para>

	<tip id="reply-to-per-mail">
	  <title>Setting Reply-to On a Per-Mail Basis</title>
	  <para>
	    <application>Evolution</application> has the ability to
	    let you specify the Reply-To in an email. Using this, you
	    can setup a special Reply-To for an email.  To do this:
	    <orderedlist numeration="arabic">
	      <listitem>
                <para>
		  Open a composer window
			 </para>
			 </listitem>
			 <listitem>
			 <para>
			 Open the Reply-To field by selecting
			 <menuchoice>
			 <guimenu>View</guimenu>
			 <guimenuitem>Reply To</guimenuitem>
			 </menuchoice>
			 </para>
			 </listitem>
			 <listitem>
			 <para>
			 Enter the address you wish to have be the
			 Reply-To address in the new Reply-To field.
			 </para>
			 </listitem>
			 </orderedlist>			 
	  </para>
	</tip>
        </sect3>
			 
			 <sect3 id="usage-mail-getnsend-send-to">
	      <title>Choosing Recipients Quickly</title>
	      <para>
		If you have created address cards in the contact manager,
          you can also enter nicknames or other portions of address
          data, and <application>Evolution</application> will offer a
          drop down list of possible address completions from your
          address book.  If you enter a name or nickname that can go
          with more than one card, Evolution will open a dialog box to
          ask you which person you meant. 

<!-- Also, <application>Evolution</application> will add a
          domain to any unqualified addresses.  By default, this is
          your domain, but you can choose which one mail preferences
          dialog. NOTE: Bug filed on this: it's not available now,
          but may be in the future. 
-->

          </para>

          <para>
            Alternately, you can click on the
            <guibutton>To:</guibutton>, <guibutton>Cc:</guibutton>, or
            <guibutton>Bcc:</guibutton> buttons to get a list --
            potentially a very long one -- of the email addresses
            in your contact manager.  Select addresses and click on
            the arrows to move them into the appropriate address
            columns.
          </para>
          <para>
            For more information about using email together with the
            contact manager and the calendar, see <xref
            linkend="contact-automation-basic"> and <xref
            linkend="usage-calendar-apts">.
          </para>
        </sect3>
      </sect2>

      <sect2 id="usage-mail-getnsend-send-reply">
        <title>Replying to Email Messages</title>
        <para>
           To reply to a message, press the
           <guibutton>Reply:</guibutton> button while it is selected,
           or choose <guimenuitem>Reply to Sender:</guimenuitem> from
           the message's right-click menu.  That will open the
           <interface>message composer</interface>.  The
           <guilabel>To:</guilabel> and <guilabel>Subject:</guilabel>
           fields will already be filled, although you can alter them
           if you wish.  In addition, the full text of the old message
           is inserted into the new message, either grey (for
           HTML display) or with the &gt; character before each line
           (in plain text mode), to indicate that it's part of the
           previous message.  People often intersperse their message
           with the quoted material as shown in <xref
           linkend="usage-mail-getnsend-reply-fig">.

 <!-- ==============Figure=================================== -->
       <figure id="usage-mail-getnsend-reply-fig">
         <title>Reply Message Window</title>
         <screenshot>
          <screeninfo>Evolution Main Window</screeninfo>
          <mediaobject><imageobject><imagedata fileref="figures/replymsg" format="png" srccredit="Aaron Weber">
        </imageobject></mediaobject>
        </screenshot>
      </figure>
<!-- ==============End of Figure=================================== -->
        </para>
        <para>
          If you're reading a message with several recipients, you may
           wish to use <guibutton>Reply to All</guibutton> instead of
           <guibutton>Reply</guibutton>.  If there are large numbers
           of people in the <guilabel>Cc:</guilabel> or
           <guilabel>To:</guilabel> fields, this can save substantial
           amounts of time.
          <example>
            <title>Using the Reply to All feature</title>
            <para>
              Susan sends an email to a client and sends copies to Tim
              and to an internal company mailing list of co-workers.
              If Tim wants to make a comment for all of them to read,
              he uses <guibutton>Reply to All</guibutton>, but if he
              just wants to tell Susan that he agrees with her, he
              uses <guibutton>Reply</guibutton>.  Note that his reply
              will not reach anyone that Susan put on her
              <guilabel>Bcc</guilabel> list, since that list is not
              shared with anyone.
            </para>
          </example>
        </para>
        <para>
          If you're subscribed to a mailing list, and want your reply
          to go just to the list, rather than to the sender, choose
          <guibutton>Reply to List</guibutton> instead of
          <guibutton>Reply</guibutton> or <guibutton>Reply to
          All</guibutton>.
          <note>
            <title>What is a Mailing List?</title>
            <para>
              Mailing Lists are one of the most popular tools for
              group collaboration on the Internet. Here's how they work: 
              <simplelist>
                <member>
                  Someone sends a message to a single address, like
                  <email>evolution@ximian.com</email>.
                </member>
                <member>
                  That address belongs to a program that distributes
                  the message to a list of recipients.
                </member>
             </simplelist>
               The mail management program lets individuals subscribe
               to or unsubscribe from the list at will, without
               requiring the message writers to remember the addresses
               of every recipient.
            </para>
            <para>
              Mailing list servers can also let network administrators
              control mail flow, list membership, and even moderate
              the content of mailing lists.
            </para>
          </note>
        </para>
      </sect2>

      <sect2 id="usage-mail-getnsend-send-find">
        <title>Searching and Replacing with the Composer</title>
        <para>
           You are probably familiar with search and replace features
           in any sort of text-editing software, and if you come from
           a Linux or Unix background, you may know what
           <guimenuitem>Find Regex</guimenuitem> does.  If you aren't
           among the lucky who already know, here's a quick rundown of
           the automated text searching features that the message
           composer makes available to you.
        </para>
        <para>
           <variablelist>
            <varlistentry>
              <term><guimenuitem>Find:</guimenuitem></term>
              <listitem><para> Enter a word or phrase, and
              <application>Evolution</application> will find it
              in your message.
              </para></listitem>
            </varlistentry>

            <varlistentry>
              <term><guimenuitem>Find Regex:</guimenuitem></term>
              <listitem>
                <para>
                  Find a regex, also called a
                  <glossterm linkend="regular-expression">regular
                  expression</glossterm>, in your composer window.
               </para>
             </listitem>
            </varlistentry>

            <varlistentry>
              <term><guimenuitem>Find Again:</guimenuitem></term>
              <listitem><para>
                   Select this item to repeat the last search you performed.
              </para></listitem>
            </varlistentry>

            <varlistentry>
               <term><guimenuitem>Replace:</guimenuitem></term>
               <listitem><para>
                 Find a word or phrase, and replace it with
                 something else.
               </para></listitem>
            </varlistentry>

          </variablelist>
        </para>

        <para>
            For all of these menu items, you can choose whether or not
            to <guilabel>Search Backwards</guilabel> in the document
            from the point where your cursor is.  For all but the
            regular expression search (which doesn't need it), you are
            offered a check box to determine whether the search is to
            be <guilabel>Case Sensitive</guilabel> when it determines
            a match.
        </para>
      </sect2>

      <sect2 id="usage-mail-getnsend-send-html">
        <title>Enhance your email with HTML</title>
        <para>
            Normally, you can't set text styles or insert pictures in
            emails, which is why email is often regarded as
            uncommunicative and cold, and why people often resort to
            using far too many exclamation points to convey their
            feelings.  However, most newer email programs can display
            images and text styles as well as basic alignment and
            paragraph formatting. They do this with <glossterm
            linkend="html">HTML</glossterm>, just like web pages do.
        </para>
        <note>
          <title>HTML Mail is not a Default Setting</title>
          <para>
            Some people do not have HTML-capable mail clients, or
            prefer not to receive HTML-enhanced mail because it is
            slower to download and display. Because some people may
            prefer not to get HTML mail,
            <application>Evolution</application> sends plain text
            unless you explicitly ask for HTML.  
           </para>
	 </note>

	 <para> You can change the format of an email message between
            plain text and HTML by choosing <menuchoice>
            <guimenu>Format</guimenu> <guimenuitem>
            HTML</guimenuitem></menuchoice>.
	  </para>
	  <para>
            To send all your mail as HTML by default, set your mail
            format preferences in the mail configuration dialog.  See
            <xref linkend="config-prefs-mail"> for more
            information.
      </para>
      <para>
	HTML formatting tools are located in the toolbar just above
	the space where you'll actually compose the message, and
	they also appear in the <guimenu>Insert</guimenu> and
	<guimenu>Format</guimenu> menus.
      </para>
      <para>
	The icons in the toolbar are explained in <glossterm
            linkend="tooltip">tool-tips</glossterm>, which appear when
            you hold your mouse over the buttons.  The buttons fall
            into four categories:
            <variablelist>
             <varlistentry>
             <term>Headers and lists:</term>
              <listitem>
                <para>
                  At the left edge of the toolbar, you can choose
                  <guilabel>Normal</guilabel> for a default text style
                  or <guilabel>Header 1</guilabel> through
                  <guilabel>Header 6</guilabel> for varying sizes of
                  header from large (1) to tiny (6). Other styles
                  include <guilabel>preformat</guilabel>, to use the HTML
                  tag for preformatted blocks of text, and three types
                  of bullet points for the highly
                  organized.
                </para>
	      <tip>
		<title>Using Bullets to Make Your Email More
		Attractive</title>
		<para>
		  Often times, people use asterisks instead of real bullets.
		  Not only do asterisks look nicer, but
		  <application>Evolution</application> will word wrap for you,
		  which makes your text looks nicer.
		</para>
	      </tip>
	    </listitem>
	  </varlistentry>
	  <varlistentry>
	    <term>Text style:</term>
	    <listitem>
	      <para>
		Use these buttons to determine the way your letters
		look.  If you have text selected, the style will
		apply to the selected text.  If you do not have text
		selected, the style will apply to whatever you type
		next.  The buttons are:
		<itemizedlist mark="none">
		  <listitem><para>Push <guibutton>B</guibutton> for bold text</para></listitem>
		  <listitem><para>Push <guibutton>I</guibutton> for italics</para></listitem>
		  <listitem><para>Push <guibutton>U</guibutton> to underline</para></listitem>
		  <listitem><para>Push <guibutton>S</guibutton> for a strikethrough.</para></listitem>
		</itemizedlist>
	      </para>
	    </listitem>
	  </varlistentry>
	  <varlistentry>
              <term>Alignment:</term>
	    <listitem>
	      <para>
		Located next to the text style buttons, these three
		paragraph icons should be familiar to users of most
		word processing software.  The leftmost button will
		make your text aligned to the left, the center
		button, centered, and the right hand button,
		aligned on the right side.
	      </para>
	    </listitem>
	  </varlistentry>

            <varlistentry>
              <term>Indentation rules:</term>
              <listitem>
                <para>
                  The button with the arrow pointing left will reduce
                  a paragraph's indentation, and the right arrow will
                  increase its indentation.
               </para>
            </listitem>
          </varlistentry>

            <varlistentry>
              <term>Color Selection:</term>
              <listitem>
                <para>
                  At the far right is the color section tool.  The
                  colored box displays the current text color; to
                  choose a new one, click the arrow button just to the
                  right. If you have text selected, the color will
                  apply to the selected text.  If you do not have text
                  selected, the color will apply to whatever you type
                  next.  You can select a background color or image by
                  right-clicking on the message background and
                  selecting <guilabel>Page</guilabel>.
               </para>
            </listitem>
          </varlistentry>
          </variablelist>
        </para>
        <para>
	The <guimenu>Insert</guimenu> gives you opinions which let you
           spruce up your email to make it more interesting:
	<variablelist>
	  <varlistentry>
	    <term><guimenuitem>Link:</guimenuitem></term>
	    <listitem>
	      <para>
		Lets you link some text to a website.  Use this tool to put hyperlinks in your HTML
                  messages.  If you don't want special link text, you can just enter the address
                  directly, and <application>Evolution</application>
                  will recognize it as a link.  To add a link:
		<orderedlist numeration="arabic">
		  <listitem>
		    <para>
		      Select the text you wish to link from.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Right click on the text and click on <guibutton>Link</guibutton>.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Put the URL you want to use in the <guilabel>URL</guilabel> field.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Click <guibutton>OK</guibutton>.
		    </para>
		  </listitem>
		</orderedlist>
	      </para>
	      <note>
		<para>
		  If you're typing a webpage address to be automatically formatted, keep in mind that a space terminates the link.
		</para>
	      </note>
	    </listitem>
	  </varlistentry>
	  <varlistentry>
	    <term><guimenuitem>Image:</guimenuitem></term>
	    <listitem>
	      <para>
		Lets you put an image alongside text.
	      </para>
	      <para>
		To insert an image into your email:
		<orderedlist numeration="arabic">
		  <listitem>
		    <para>
		      Open a new email by clicking <guibutton>New Message</guibutton>
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Make sure that you have the
		      <menuchoice>
			<guimenu>Format</guimenu>
			<guimenuitem>HTML</guimenuitem>
		      </menuchoice>
                      selector checked.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Click the <guibutton>Insert Image</guibutton> button in the toolbar, or select		   
		         <menuchoice>
			<guimenu>Insert</guimenu>
			<guimenuitem>Image</guimenuitem>
		      </menuchoice>.
		      </para>
		  </listitem>
		  <listitem>
		    <para>
		      Choose your image by clicking the <guibutton>Browse</guibutton> button.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Press <guibutton>Insert</guibutton> to insert the image.
		    </para>
		  </listitem>
		</orderedlist>
	      </para>
	    </listitem>
	  </varlistentry>
	  <varlistentry>
	    <term><guimenuitem>Rule:</guimenuitem></term>
	    <listitem>
	      <para>
		Inserts a horizontal line into the text to help divide two
		sections.
	      </para>
	      <para>
		To insert a rule:
		<orderedlist numeration="arabic">
		  <listitem>
		    <para>
		      Open a new email by clicking <guibutton>New Message</guibutton>
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Make sure that you have the
		      <menuchoice>
			<guimenu>Format</guimenu>
			<guimenuitem>HTML</guimenuitem>
		      </menuchoice>
                      selector checked.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Click the <guibutton>Rule</guibutton> button in the <guilabel>Toolbar</guilabel>.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Select the type of rule. You can use a plain
		      line, a 3D line, or a yellow line with flowers.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Choose the size of the line, as a percentage of the width of the email window.
		    </para>
		  </listitem>

		  <listitem>
		    <para>
		      Choose the alignment and style.  For the plain
		      line, you can choose the thickness of the line,
		      and whether it will be shaded, or solid.  For the
		      other types, you can only choose alignment.
		    </para>
		  </listitem>

		  <listitem>
		    <para>
		      Click <guibutton>Insert</guibutton> to insert the rule.
		    </para>
		  </listitem>
		</orderedlist>
	      </para>
	    </listitem>
	  </varlistentry>
	  <varlistentry>
	    <term>Table:</term>
	    <listitem>
	      <para>
		Inserts a table into the text to help divide two
		sections.
	      </para>
	      <para>
		To insert a rule:
		<orderedlist numeration="arabic">
		  <listitem>
		    <para>
		      Open a new email by clicking <guibutton>New Message</guibutton>
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Make sure that you have the
		      <menuchoice>
			<guimenu>Format</guimenu>
			<guimenuitem>HTML</guimenuitem>
		      </menuchoice>
                      selector checked.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Click the <guibutton>Table</guibutton> button in the <guilabel>Toolbar</guilabel>.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Select the <guibutton>Template</guibutton> you wish to use.  Each template has a slightly different feel and layout.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      If you so desire, you may change the other options such as: number of rows, columns, spacing of each cell, and more.
		    </para>
		  </listitem>
		  <listitem>
		    <para>
		      Click the <guibutton>Insert</guibutton> button.
		    </para>
		  </listitem>
		</orderedlist>
	      </para>
	    </listitem>
	  </varlistentry>
	</variablelist>
	To add a hyperlink to your HTML message:
	<orderedlist numeration="arabic">
	  <listitem>
	    <para>
	      Select the text you want to display as a link.
	    </para>
	  </listitem>
	  <listitem>
	    <para>
	      Right click on text and select
	      <guimenuitem>Link</guimenuitem>
	    </para>
	  </listitem>
	  <listitem>
	    <para>
	      Enter the address you wish to link to in the
	      <guilabel>URL</guilabel> field.
	    </para>
	  </listitem>
	  <listitem>
	    <para>
	      Press <guibutton>OK</guibutton>.
	    </para>
	  </listitem>
	</orderedlist>
      </para>

      <para>
	To add an image to your HTML message:
	<orderedlist numeration="arabic">
	  <listitem>
	    <para>
	     Select
	      <menuchoice>
		<guimenu>Insert</guimenu>
		<guimenuitem>Image</guimenuitem>
	      </menuchoice>.
	    </para>
	  </listitem>
	  <listitem>
	    <para>
	      Click <guibutton>Browse</guibutton> to select the image
	      you want to include in your email.
	    </para>
	  </listitem>

	  <listitem>
	    <para>
	    Along the right side of the window, choose the alignment,
	    border, and other attributes of the image. If you change
	    the size attributes, the image will be shrunk or stretched
	    to fit the size you have chosen.
	    </para>
	  </listitem>

	  <listitem>
	    <para>
	     If you would like to make the image a clickable link,
	     enter a URL in the <guilabel>Link</guilabel> tab of the
	     window.
	    </para>
	  </listitem>

	  <listitem>
	    <para>
	      When you are finished, press
	      <guibutton>Insert</guibutton> to include the image in
	      your message.
	    </para>
	  </listitem>
	</orderedlist>
      </para>
      <para>
        You can insert an image into the background of your message by
        right-clicking on the message background and selecting
        <guimenuitem>Page</guimenuitem>. From that dialog, you may
        also select background color and set other general options
        about the html message you are composing.
     </para>
      <sect3 id="html-templates">
	<title>HTML Templates</title>
	<para>
          <application>Evolution</application> not only allows you to
	  decorate your email with HTML text and graphics, but
	  provides you with prebuilt templates for you to use when
	  making these improvements.  You can use these to emphasize a
	  point or frame an image in an attractive manner.
        </para>
	<para>
	  To include a template into your HTML based email:
	  <orderedlist numeration="arabic">
	    <listitem>
	      <para>
		Create a new email by clicking <guibutton>New Message</guibutton>.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Make sure that the
		<menuchoice>
		  <guimenu>
		    Format
		  </guimenu>
		  <guimenuitem>
		    HTML
		  </guimenuitem>
		</menuchoice>
		selector is checked.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Click the <guibutton>HTML Template</guibutton> button in the 
		<guilabel>Toolbar</guilabel> or select 		
		<menuchoice>
		  <guimenu>
		  Insert
		  </guimenu>
		  <guimenuitem>
		    HTML Template
		  </guimenuitem>
		</menuchoice>
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Select the template type in the
		<guilabel>Template</guilabel> selection box. Your
		options are <guilabel>Note</guilabel> and
		<guilabel>Image Frame</guilabel>.  
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Set the size and alignment of the HTML template.
	      </para>
	    </listitem>

	    <listitem>
	      <para>
		Click <guibutton>Insert</guibutton> to insert it where the 
		cursor is.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Click on the text in the template, and enter the text
		you want to use.
              </para>
	      <para>
		If you have selected an image frame template,
		right-click on the image and select
		<guimenuitem>Image</guimenuitem> to select the image
		you want to place in the frame.
	      </para>
	    </listitem>
	  </orderedlist>
	</para>
      </sect3>
      <sect3 id="composer-tables">
	<title>Tables in Email</title>
	<para>
	  <application>Evolution</application> allows you to put
	  tables in your HTML email to help organize your thoughts.
	  These tables are a simplified version of what you might find
	  in a spreadsheet program like
	  <application>Gnumeric</application>.
	</para>
	<para>
	  To include a table in your email:
	  <orderedlist numeration="arabic">
	    <listitem>
	      <para>
		Create a new email by clicking <guibutton>New Message</guibutton>.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Make sure you have the
		<menuchoice>
		  <guimenu>
		    Format
		  </guimenu>
		  <guimenuitem>
		    HTML
		  </guimenuitem>
		</menuchoice>
		selector checked.
	      </para>
	    </listitem>

	    <listitem>
	      <para>
	      Select
		<menuchoice>
		  <guimenu>
		    Insert
		  </guimenu>
		  <guimenuitem>
		    Table
		  </guimenuitem>
		</menuchoice>
		or click the <guiicon>Table</guiicon> button in the
		toolbar.
	      </para>
	    </listitem>

	    <listitem>
	      <para>
		Select the template, or style, you want to use for the
		table.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Set the number of rows and columns you want.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Click the <guibutton>Insert</guibutton> button.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Click in a cell and type to insert text into the table.
	      </para>
	    </listitem>
	  </orderedlist>
	</para>
	<para>
	  You can also edit a table after creation.  Just right-click
	  on it and select <guimenuitem>Table</guimenuitem> to open
	  the table editing window again. Or, you can select items
	  from the <guimenu>Table Delete</guimenu> and <guimenu>Table
	  Insert</guimenu> menus.
	  </para>
	
	<para>
	  <tip id="table-tip">
	  <title>Deleting an Entire Table</title>
	  <para>
	    You can delete an entire table by right-clicking on
            a table or other HTML object in a message, and selecting
	  <menuchoice>
	    <guimenu>Table Delete</guimenu>
	    <guimenuitem>Table</guimenuitem> </menuchoice>.  In an
	    HMTL message, your signature, templates, and image
	    inclusions all have tables around them, and you can remove
	    them completely and quickly with this shortcut.
	  </para>
         </tip>
        </para>

      </sect3>
    </sect2>
    
    <sect2 id="usage-mail-getnsend-fwd">
        <title>Forwarding Mail</title>
        <para>
          The post office forwards your mail for you when you change
          addresses, and you can forward a letter if it comes to you by mistake.
          The email <guilabel>Forward</guilabel> button
          works in much the same way.  It's particularly useful if you
          have received a message and you think someone else would
          like to see it.  You can forward a message as an attachment
          to a new message (this is the default) or
          you can send it <glossterm linkend="inline">inline</glossterm> as a quoted
          portion of the message you are sending.  Attachment
          forwarding is best if you want to send the full, unaltered
          message on to someone else.  Inline forwarding is best if
          you want to send portions of a message, or if you have a
          large number of comments on different sections of the
          message you are forwarding.  Remember to note from whom the
          message came, and where, if at all, you have removed or
          altered content.
        </para>
        <para>
          To forward a message you are reading, press
          <guibutton>Forward</guibutton> on the toolbar, or select
          <menuchoice> <guimenu>Message</guimenu>
          <guimenuitem>Forward</guimenuitem> </menuchoice>.  If you
          prefer to forward the message <glossterm linkend="inline">inline</glossterm>
          instead of attached, select <menuchoice>
          <guimenu>Message</guimenu> <guimenuitem>Forward
          Inline</guimenuitem> </menuchoice> from the menu.  Choose an
          addressee as you would when sending a new message; the
          subject will already be entered, but you can alter it.
          Enter your comments on the message in the
          <interface>composition frame</interface>, and press
          <guibutton>Send</guibutton>.
        </para>
      </sect2>

      <sect2 id="usage-mail-getnsend-ettiquette">
        <title>Seven Tips for Email Courtesy</title>
        <para>

          <itemizedlist>

            <listitem>
              <para>
                 Don't send spam or forward chain mail.  If you must,
                 watch out for hoaxes and urban legends, and make sure
                 the message doesn't have multiple layers of
                 greater-than signs, (&gt;) indicating multiple layers
                 of careless in-line forwarding.
              </para>
            </listitem>

            <listitem>
              <para>
                Always begin and close with a salutation. Say "please"
                and "thank you," just like you do in real life. You
                can keep your pleasantries short, but be pleasant!
              </para>
            </listitem>

            <listitem>
              <para>
                WRITING IN CAPITAL LETTERS MEANS YOU'RE SHOUTING!
                Don't write a whole message in capital letters.  It
                hurts people's ears.
              </para>
            </listitem>

            <listitem>
              <para>
               Check your spelling and use complete sentences. By
               default, <application>Evolution</application> will put
               a red line beneath words it doesn't recognize, as you
               type them.
              </para>
            </listitem>

            <listitem>
              <para>
                Don't send nasty emails (flames).  If you get one,
                don't write back.
              </para>
            </listitem>
	  
	  <listitem>
	    <para>
	      When you reply or forward, include just enough of
	      the previous message to provide context: not too
	      much, not too little.
	    </para>
	  </listitem>

	  <listitem>
	    <para>
	      Don't send spam.
	    </para>
	  </listitem>
	</itemizedlist>
      </para>
    </sect2>
    <sect2 id="fancy-mail">
      <title>Improving Email Appearance with HTML</title>
      <para>
	<application>Evolution</application> can do a lot with email
	by utilizing the HTML features.  Making an email functional
	and visually attractive can be challenging.  The following
	section provides tips to make your mail functional, while
	being more visually attractive than ever.
      </para>
      <sect3 id="sections-bolded-title">
	<title>Sections Outlined in Bold</title>
	<para>
	  Indented sections are a great way to categorize and group
	  your thoughts together.  Below is an example of indented
	  text with headings to help separate your thoughts into the
	  proper sections:
	  <figure>
	    <title>Indented Text with Headlines</title>
	    <screenshot>
	      <screeninfo></screeninfo>
	      <graphic  format="png" fileref="figures/outline"
		       srccredit="Kevin Breit">
	    </screenshot>
	  </figure>
	</para>
	<para>
	  This message is not only more attractive, but more
	  informative.  Each section is broken down into subsctions.
	  The title for each section is in bold text, with the
	  following content indented.
	</para>
	<para>
	Making your headlines a larger size instead of bold can help
	as well.  Header size 4 is often the best alternative for
	bold.  You can change your text to size 4 by selecting it and
	pressing <keycombo
	action="simul"><keycap>Ctrl</keycap><keycap>4</keycap></keycombo>,
	and change it back to normal size with <keycombo
	action="simul"><keycap>Ctrl</keycap><keycap>0</keycap></keycombo>.
	</para>
      </sect3>
      <sect3 id="bulleted-lists">
	<title>Bulleted Lists</title>
	<para>
	  Select the <guimenuitem>Bulleted List</guimenuitem> option
	  from the text style drop-down box to begin making a bulleted
	  list. <application>Evolution</application> will handle the
	  word wrap and indentation for you.  If you prefer to send
	  the message in plain text, you can still write it up in
	  HTML, and <application>Evolution</application> will convert
	  to a well-formed plain-text bulleted list, using asterisks
	  instead of HTML bullets.
	</para>
      </sect3>
      <sect3 id="inline-images">
	<title>Images In Your Email</title>
	<para>
	  Another way to improve the appearance of messages is to add
	  images to them.  Especially if you want to discuss a
	  particular image in the message, the the HTML picture frame
	  template in <application>Evolution</application>, as it
	  looks good and has captions below it.
	</para>
	<para>
	  If you do choose to use images, try to keep them narrow.  If
	  your images are wider than 400 pixels, the image may not fit
	  in the whole email window, making it hard for your reader to
	  read the email and view the image.  Instead, you should
	  consider using a thumbnail and creating a link on the image
	  which opens a browser with the full image.
	  <figure>
	    <title>Images in an email</title>
	    <screenshot>
	      <screeninfo></screeninfo>
	      <graphic  format="png" fileref="small_desktop" srccredit="Kevin Breit">
	    </screenshot>
	  </figure>
	</para>
      </sect3>
      <sect3 id="color-suggestions">
	<title>Coloring Your Text</title>
	<para>
	  Colors can help bring words or sentences out for emphasis.
	  You should choose your colors carefully though, because the
	  wrong color can be distracting.  Some good colors to use
	  are:
	  <itemizedlist>
	    <listitem>
	      <para>
		Light brown
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Dull purple
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Dark red
	      </para>
	    </listitem>
	  </itemizedlist>
	  <!-- Include a screenshot --> 

  All of these colors are of a similar level of saturation and are
  easy to read on a white background.

	</para>
      </sect3>
      <sect3 id="signature-howto">
	<title>HTML Signatures in Your Email</title>
	<para>
	  The last few lines of an email message are often devoted to
	  a signature block.  Typically, the signature block is
	  inserted by the mail program.   You
	  can use the signature to add your address and any other
	  contact information you think is important, or simply to
	  provide an amusing or interesting closing line for your
	  message.  <application>Evolution</application> gives you the
	  option of designing your signatures in HTML or in plain
	  text.
	</para>
	<sect4 id="html-signature-howto">
	  <title>Setting Up Your HTML Signature</title>
	  <para>
	    To set up an HTML signature:
	    <orderedlist numeration="arabic">
	      <listitem>
		<para>
                Select
		  <menuchoice>
		    <guimenu>Tools</guimenu>
		    <guimenuitem>Configure</guimenuitem>
		  </menuchoice>.
		</para>
	      </listitem>
	      <listitem>
		<para>
		  Click the <guibutton>Composer
		  Preferences</guibutton> on the left side of the
		  configuration window.
		</para>
	      </listitem>
	      <listitem>
		<para>
		  In the <guilabel>Composer Preferences</guilabel>
		  window, click the second tab on the top labeled
		  <guibutton>Signatures</guibutton>.
		</para>
	      </listitem>
	      <listitem>
		<para>
		  If you have a pre-made signature, click the
		  <guibutton>Browse</guibutton> to select your
		  signature.  You can find pre-made signatures at <ulink
									 url="http://www.ximian.com/devzone/projects/art/signatures.html">the
		    Ximian signature page</ulink>.
		</para>
	      </listitem>
	      <listitem>
		<para>
		  If you are creating a new signature, click the
		  <guibutton>Edit</guibutton> button to open up the HTML
		  signature editor.
		</para>
	      </listitem>
	      <listitem>
		<para>
		  The HTML signature editor uses the same interface as
		  the composer.  You can create your signature in this
		  window.
		</para>
	      </listitem>
	      <listitem>
		<para>
		  Once you have completed your signature, click
		  <menuchoice>
		    <guimenu>File</guimenu>
		    <guimenuitem>Save and Close</guimenuitem>
		  </menuchoice>
		</para>
	      </listitem>
	      <listitem>
		<para>
		  When you select your mail to be composed in HTML
		  format, your HTML signature will automatically show up.
		</para>
	      </listitem>
	    </orderedlist>
	  </para>
	</sect4>
      </sect3>
    </sect2>
  </sect1>
  <sect1 id="rsvp-stuff">
    <title>RSVPs in Mail</title>
    <para>
      If you create an event in the calendar component, you can then
      send invitations to the attendee list through the
      <application>Ximian Evolution</application> email tool.  The
      invitation card is sent as an attachment in iCal format.
    </para>
    <para>
      If you click on the attachment button and click the
      <guibutton>View Inline</guibutton>, <application>Ximian
      Evolution</application> will show you information about the
      meeting, and let you respond to the meeting in several ways.
      Select the response that you would like, and then click the
      <guibutton>OK</guibutton> button.
   </para>
   <para>
  Your options are:
      <variablelist>
	<varlistentry>
	  <term>Accept:</term>
	  <listitem>
	    <para>
	  Select this entry if you will attend the meeting.  When you
	  click the <guibutton>OK</guibutton> button, the meeting will
	  be entered into your calendar.
	    </para>
	  </listitem>
	</varlistentry>

	<varlistentry>
	  <term>Tentatively Accept:</term>
	  <listitem>
	    <para>
	  Select this entry if you will probably attend the meeting.
	  When you click the <guibutton>OK</guibutton> button, the
	  meeting will be entered into your calendar, but marked as
	  tentative.
	    </para>
	  </listitem>
	</varlistentry>

	<varlistentry>
	  <term>Decline:</term>
	  <listitem>
	    <para>
	  Select this item if you will be unable to attend the
	  meeting. The meeting will not be entered into your calendar
	  when you click the <guibutton>OK</guibutton>, although your
	  response will be sent to the meeting host if you have
	  checked the <guilabel>RSVP</guilabel> box.
	    </para>
	  </listitem>
	</varlistentry>

	<varlistentry>
	  <term>RSVP:</term>
	  <listitem>
	    <para>
	     Check this box if you would like your response sent to
	     the meeting organizers.
	    </para>
	  </listitem>
	</varlistentry>
     </variablelist>
    </para>
  </sect1>

  <sect1 id="usage-mail-subscriptions">
    <title>Subscription Management</title>
    <para>
      Since IMAP folders exist on the server, and opening them or
      checking them takes time, you need fine-grained control over the
      way that you use IMAP folders.  That's why
      <application>Evolution</application> has an IMAP subscriptions
      manager.  If you prefer to have every mail folder displayed, you
      can select that option as well. However, if you'd like to choose
      specific items in your mailbox, and exclude others, you can use
      the subscription management tool to do that.
    </para>
    <para>
    Here's how:
      <orderedlist numeration="arabic">
	
	<listitem>
	  <para>
	   Select
	   <menuchoice><guimenu>Tools</guimenu><guimenuitem>Subscribe
	   to Folders</guimenuitem></menuchoice>.
	  </para>
	</listitem>

	<listitem>
	  <para>
	    If you have accounts on multiple IMAP servers, select the
	    server where you'd like to manage your
	    subscriptions. <application>Evolution</application> will
	    display a list of available files and folders.
	  </para>
	</listitem>

	<listitem>
	  <para>
            Select a file or folder by clicking on it.  You will want
            to select at least the <guilabel>INBOX</guilabel>
            folder. Depending upon the way your IMAP server is
            configured, the list of available files may include
            non-mail folders. If it does, you can ignore them.
	  </para>
	</listitem>

	<listitem>
	  <para>
	    Click the <guibutton>Subscribe</guibutton> to add it to
	    the subscribed list.
	  </para>
	</listitem>
	<listitem>
	  <para>
	    When you have subscribed to the folders you want, close
	    the window.
	  </para>
	</listitem>
      </orderedlist>
    </para>
  </sect1>

  <sect1 id="encryption">
    <title>Encryption</title>
    <sect2 id="encryption-whatis">
      <title>What is Encryption?</title>
      <para>
	Encryption is an ancient method of keeping information safe
	from prying eyes. <application>Evolution</application> helps
	you you protect your privacy by using
	<application>gpg</application>, an implementation of strong
	<glossterm linkend="public-key-encryption">Public Key
	Encryption.</glossterm>
      </para>

	<note id="pub-priv">
	  <title>Public Key?  Private Key?  What is the difference?</title>
	  <para>
	    GPG uses two keys: public and private.  You can give your
	    public key to anyone you want to receive
	    encrypted messages, or put it on a public key server so
	    that people can look it up before contacting you.
	    <emphasis>Never give your private key to anyone,
	    ever</emphasis>.  Your private key lets you decrypt any
	    message encrypted with your public key.
	  </para>
 	</note>

      <para>
        Using encryption takes a bit of forethought.  When you send a
        message that is encrypted, you must encrypt it using your
        intended recipient's public key.  To <emphasis>get</emphasis>
        an encrypted message, you must make sure that the sender has
        your public key in advance.
      </para>

      <para>
	You can use encryption in two different ways:
        <simplelist>
          <member>
             Encrypt the entire message, so that nobody but the recipient can read it.
          </member>
          <member>
            Attach an encrypted signature to a plain text message, so
            that the recipient can read the message without decrypting it, and 
            only needs decryption to verify the sender's identity.
           </member>
         </simplelist>
      </para>

	<example> 
         <title>Sending an Encrypted Message</title>
	  <para>
	    Kevin wants to send an encrypted message to his friend
	    Rachel.  He looks up her public key on a general key
	    server, and then tells
	    <application>Evolution</application> to encrypt the
	    message.  The message now reads "@#$23ui7yr87#@!48970fsd."
	    When the information gets to Rachel, she decrypts it using
	    her private key, and it appears as plain text for her to
	    read.
	  </para>
	</example>
      <tip id="always-sign">
	<title>Always Sign</title>
	<para>
	  You can set <application>Evolution</application> to always
	  sign your email messages:
	  <orderedlist numeration="arabic">
	    <listitem>
	      <para>
		Open your account preferences.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Open the <guilabel>Security</guilabel> tab.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
		Click the <guibutton>Always sign outgoing messages
		when using this account</guibutton> button.
	      </para>
	    </listitem>
	  </orderedlist>
	</para>
      </tip>
    </sect2>

    <sect2 id="encryption-keygen">
      <title>Making Encryption Keys</title>
      <para>
        Before you can get or send encrypted mail, you need to
	generate your public and private keys with GPG. Here's how:
      </para>
      <tip>
	<title>GPG Versions</title>
	<para>
	  This manual covers version 1.0.6 of GPG.  If your version is
	  different, this may not be entirely accurate.  You may find
	  out your version number by typing in: <command>gpg
	  --version</command>.
	</para>
      </tip>
      <para>
        <orderedlist numeration="arabic">
	  <listitem>
      	   <para>
            Open a terminal and type <command>gpg --gen-key</command>.
	  </para>
         </listitem>

	  <listitem>
      	   <para> 
             Choose the default algorythm, "DSA and ElGamal."
	  </para>
         </listitem>

	  <listitem>
      	   <para>
            Choose a key length. The default, 1024 bits, should be
            long enough, and 2048 bits is considered very strong
            indeed.
	  </para>
         </listitem>

	  <listitem>
      	   <para>
             Decide if you want your key to expire automatically, and if so, when.
	  </para>
         </listitem>


	  <listitem>
      	   <para>
            Enter your name, email address, and any additional
            personal information you think is appropriate. Do not
            falsify this information, because it will be needed to
            verify your identity later on.
	  </para>
         </listitem>

	  <listitem>
      	   <para>
             Next, enter your passphrase. It does not have to be the
             same as your email password or your login password. In
             fact, it probably shouldn't. Don't forget it. If you lose
             it, your keys will be useless and you will be unable to
             decrypt messages sent to you with those keys.
	  </para>
         </listitem>

	  <listitem>
      	   <para>
             Now, GPG will generate your keys.  This may take awhile,
             so feel free to do something else while it's
             happening. In fact, using your computer for something
             else actually helps to generate better keys, because it
             increases the randomness in the key generation seeds.
	  </para>
         </listitem>
	</orderedlist>
      </para>
      <para>
	Once the keys are generated, you can view your key information
        by typing <command>gpg --list-keys</command>.  You should see
        something similar to this:
        <programlisting>
	    /home/you/.gnupg/pubring.gpg
	    ----------------------------
	    pub 1024D/32j38dk2 2001-06-20 you &lt;you@your-address.com&gt;
	    sub 1024g/289sklj3 2001-06-20 [expires: 2002-11-14]
	</programlisting>
      </para>
      <para>
         GPG will create one list, or keyring, for your public keys
         and one for your private keys. All the public keys you know
         are stored in the file
         <filename>~/.gnupg/pubring.gpg</filename>. If you want to
         give other people your key, send them that file.
      </para>
      <para>
          If you wish, you can upload your keys to a keyserver. Here's
          how:
        <orderedlist>
	  <listitem>
	    <para>
              Check your public key ID with <command>gpg
--list-keys</command>. It will be the string after 1024D on the line
beginning with "pub." In this example, it's 32j38dk2.
            </para>
	  </listitem>
	  <listitem>
	    <para>
	     Enter the command <command>gpg --send-keys --keyserver
wwwkeys.pgp.net 32j38dk2</command>.  Substitute your key ID for
32j38dk2. You will need your password to do this.
             </para>
           </listitem>
    </orderedlist>

	<note id="why-keyserver">
	  <title>Why Use a Keyserver?</title>
	  <para>
	    Keyservers store your public keys for you so that your
	    friends can decrypt your messages.  If you choose not to
	    use a keyserver, you can manually send your people public
	    key, include it in your signature file, or put it on your
	    own web page. However, it's easier to publish them once,
	    and then let people download them from the keyserver when
	    they want.
	  </para>
	</note>

      </para>
    </sect2>

    <sect2 id="encrypt-getting-key">
      <title>Getting and Using Public Keys</title>
      <para>
	To encrypt a message to your someone else you'll need to use
	their public key in combination with your private key.
	<application>Evolution</application> does that for you, but
	you still need to get their key and add it to your keyring.
     </para>
     <para>
        To get public keys from a public key server, enter the
        command:
	<command>
	  gpg --recv-keys --keyserver wwwkeys.pgp.net keyid
	</command>, substituting "keyid" for your recipient's ID.  You
	will need to type in your password, and then their ID will
	automatically be added to your keyring. When you send mail to
	them, <application>Evolution</application> will allow you to
	encrypt your messages.
      </para>
      <para>
        If someone sends you their public key directly, save it as a
        plain text file and enter the command <command>gpg --import
        filename</command>. This will add it to your keyring.
      </para>
    </sect2>

    <sect2 id="encrypt-evo-integ">
      <title>Setting up Evolution's Encryption</title>
      <para>
	You'll need to open
	<menuchoice>
	  <guimenu>Tools</guimenu>
	  <guimenuitem>Mail Settings</guimenuitem>
	</menuchoice>
	Once there, select the account with which you'd like to send
	and receive encrypted mail, and click the
	<guibutton>Edit</guibutton> button.  In the
	<guilabel>Security</guilabel> tab is a section labeled
	<guilabel>Pretty Good Privacy</guilabel>.  Enter your key ID
	and click <guibutton>OK</guibutton>.  Your key is now
	integrated into your identity in
	<application>Evolution</application>.
      </para>
      <note>
	<title>What is my Key ID again?</title>
	<para>
	  <application>Evolution</application> requires that you know your key ID.  If you don't remember it, you can find it by typing <command>gpg --list-keys</command> in a console window.  Your key ID will be an eight character string with random numbers and letters.
	</para>
      </note>
    </sect2>

    <sect2 id="encrypt-sending">
      <title>Sending Encrypted Messages</title>
      <para>
	As you know, you can use encryption to hide the entire
	message, or just to verify your signature. Once you've
	generated your public and private keys, and have the public
	keys of the people to whom you want to send mail, here's what
	to do:
      </para>
    </sect2>
    
    <sect2 id="sign-msg">
      <title>Signing a Message</title>
      <para>
	To sign a message, choose:
	<menuchoice>
	  <guimenu>Security</guimenu>
	  <guimenuitem>PGP Sign</guimenuitem>
	</menuchoice>
	.  You will be prompted for your PGP password.  Once you enter it,
	click <guibutton>OK</guibutton> and your message will be signed.
      </para>
    </sect2>
      
      <sect2 id="encrypt-msg">
	<title>Encrypting a Message</title>
	<para>
	  Encrypting a message is very similar to signing a message.
	  Just choose the menu item
	  <menuchoice>
	    <guimenu>Security</guimenu>
	    <guimenuitem>PGP Encrypt</guimenuitem>
	  </menuchoice>
	</para>
      </sect2>
      <sect2 id="unencrypting">
	<title>Unencrypting a Received Message</title>
	<para>
	  If you get an encrypted message, you will need to decrypt it
	  before you read it. Remember, the sender has to have your
	  public key before they can send you an encrypted message.
	</para>
	<para>
	  When you view the message,
	  <application>Evolution</application> will ask you for your
	  PGP password.  Enter it, and the message will be displayed
	  properly.  
       </para>
    </sect2>
  </sect1>
</chapter>