path: root/addressbook/ChangeLog

2001-09-14  Ettore Perazzoli  <ettore@ximian.com>

    [Automake 1.5 fixes pointed out by Richard Boulton
    <richard@tartarus.org>, as per #9258.]

    * gui/component/select-names/Makefile.am: Set CLEANFILES directly
    instead of using `+='.

    * backend/pas/Makefile.am: Rename `LDAP_BACKEND_SOURCES' to
    `LDAP_BACKEND_FILES'.

    * backend/ebook/Makefile.am: Set CLEANFILES directly instead of
    using `+='.

2001-09-13  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_connect): use
    ldap_init.  ldap_open is deprecated in openldap 2.x.

2001-09-12  Iain Holmes  <iain@ximian.com>

    * backends/ebook/evolution-vcard-importer.c (check_file_is_vcard):
    Fix the check.

2001-09-12  Larry Ewing  <lewing@ximian.com>

    * backend/ebook/e-destination.c: free the values that are being
    leaked here.

2001-09-12  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c (match_email): 
    printf arguments were reversed by mistake.  Fixed bug #9693.

2001-09-09  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-popup.c
    (popup_menu_list): Added.  Treat right-clicks on a contact list as
    a special case.
    (e_select_names_popup): Check if we are dealing with a contact
    list.

    * backend/ebook/e-book-view-listener.c
    (e_book_view_listener_check_queue): See
    e_book_listener_check_queue below.
    (e_book_view_listener_queue_response): See
    e_book_listener_queue_response below.

    * backend/ebook/e-book-listener.c (e_book_listener_check_queue):
    Explicitly prohibit reentrancy.  Use gtk-unref rather than
    bobobo-unref.
    (e_book_listener_queue_response): Hold a gtk-ref to the listener
    while the idle function runs, not a bonobo-ref.  As far as I can
    tell, it is impossible to avoid a race condition here when we have
    to worry about bonobo reentrancy.

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_insert_length): Alter a copy of the
    original EDestination, rather than just using a new one.  We need
    to do this to preserve prior-card information for possible
    reversion later.
    (e_select_names_text_model_delete): Ditto.

    * backend/ebook/e-destination.c (e_destination_clear_card): When
    clearing a destination where ->card != NULL, store it for possible
    reversion later.
    (e_destination_revert): If we have an old card stored, go back to
    using it for the destination.
    (e_destination_is_valid): Tries to detect obviously broken
    addresses.
    (e_destination_cardify): If our destination is invalid, first try
    to cardify simply by reverting to an older card.
    (e_destination_destroy): Unref any cached old card.
    (e_destination_copy): Copy the old card information.

2001-09-07  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names.c
    (sync_table_and_models): Show all rows in the table, and then
    remove the rows that correspond to entries in the
    ESelectNamesModels in the children.
    (real_add_address): Freeze/thaw our ESelectNamesModel, so that we
    don't change our table while we are in the middle of iterating
    over the selection.
    (remove_address): Just delete the address from the
    ESelectNamesModel, the signal handler will do the rest.
    (selected_rows_foreach_cb): Call remove_address to do our dirty
    work.
    (e_select_names_add_section): Connect to the 'changed' signal from
    the ESelectNamesModel, and call sync_table_and_models explicitly to
    get our initial state correct.

    * gui/component/select-names/e-select-names-table-model.c
    (fill_in_info): Deal with EDestinations in our table that don't
    come from cards.

    * gui/component/select-names/e-select-names-manager.c: Added
    another ESelectNamesModel* to the ESelectNamesManagerSection
    struct.  Called 'original_model', this contains a copy of the
    model as it is when we begin using the SelectNames dialog.
    (section_copy): Copy the original model.
    (section_free): Free the original model.
    (e_select_names_manager_add_section_with_limit): Initialize the
    original model.
    (e_select_names_clicked): I've changed the semantics of this
    dialog quite a bit... no UI freeze can stop me!  If OK is clicked,
    we do nothing.  If Cancel is clicked, we revert to the
    'original_model' copy of our address entry state before we started
    editting.  Finally, we close the dialog before any of thing. Doing
    it last caused problems, because signals were being triggered
    which had dangling pointers as their closures.
    (e_select_names_manager_activate_dialog): Copy our current state
    to the original model, and share the same ESelectNamesModel
    between the dialog and the address entry in the composer..
    (e_select_names_manager_get_cards): Removed.  It had been
    #if 0/#endif-ed out for a while.

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_freeze): Added.
    (e_select_names_model_thaw): Added.
    (e_select_names_model_uncardify): Added.  If possible,
    "uncardifies" a specific model entry.
    (e_select_names_model_changed): Changed to pay attention
    to the freeze count.

    * gui/component/select-names/e-select-names-completion.c
    (clean_query_text): Strip leading/trailing whitespace from
    queries.

    * backend/ebook/e-destination.c (e_destination_uncardify): Added.
    Converts a card-associated destination into a text-associated
    destination w/ the e-mail address.
    (e_destination_list_to_vector): Added.  A convenience routine.
    (e_destination_freev): Added.  A convenience routine.
    (e_destination_touchv): Added.  I'm lazy.

2001-09-08  Chris Toshok  <toshok@ximian.com>

    (make_contact_editor_cb): show the right contact editor (the list
    editor for list cards).
    
2001-09-08  Chris Toshok  <toshok@ximian.com>

    * gui/component/select-names/e-select-names-popup.c
    (popup_menu_card): do the EDestination xml magic on email
    addresses we put in the popup.

2001-08-27  Zbigniew Chyla  <cyba@gnome.pl>

    * gui/component/addressbook.c (addressbook_factory_new_control):
    For every category:
    - set .translate to FALSE (e_categories_master_list_nth returns
    translated category name)
    - convert category name in UTF-8 to locale's encoding

2001-08-23  Zbigniew Chyla  <cyba@gnome.pl>

    * gui/component/select-names/e-select-names-popup.c
    (popup_menu_card): Fixed two bugs:
    - missing coversion of contact name to GTK+ locale,
    - passing dynamically created string (contact name) inside uiinfo struct
    to gnome-app-helper functions.
    Remember: these functions may change strings, trying to translate them!
    (popup_menu_nocard): Ditto

2001-09-07  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook-component.c: Removed unused factory
    variable.

2001-09-06  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-storage.c (notify_listener): new
    function, notify the bonobo listener.
    (remove_ldap_folder): track change to EvolutionStorage signal.
    (create_ldap_folder): same, and make sure the type is
    "ldap-contacts".
    (load_source_data): folders that we create should have
    "ldap-contacts" as their type.
    (addressbook_storage_add_source): same.

    * gui/component/addressbook-component.c: (folder_types): add
    "ldap-contacts", for display of ldap servers (they get their own
    icon, and their own name in the Create New Folder dialog.
    (create_view): use IS_CONTACT_TYPE since we support two folder
    types now.
    (create_folder): same.
    (remove_folder): same.
    (xfer_folder): same.

2001-09-06  Chris Toshok  <toshok@ximian.com>

    * gui/contact-editor/e-contact-editor.c: (pixmaps): change
    /Toolbar/ContactEditorSave to /Toolbar/ContactEditorSaveClose.

2001-09-06  Chris Toshok  <toshok@ximian.com>

    * gui/component/Makefile.am (INCLUDES): add -DEVOLUTION_IMAGESDIR.

    * gui/widgets/e-addressbook-view.c (card_deleted_cb): remove
    status messages from here.
    (e_addressbook_view_delete_selection): same.

    * gui/widgets/e-addressbook-model.c (sequence_complete): emit a
    NULL status message along with the stop_state_changed.  The null
    status message will clear the status bar for this view.

    * gui/component/addressbook.c (set_status_message): use the
    EvolutionActivityClient stuff.

    * backend/pas/pas-backend-ldap.c (view_destroy): remove status
    message for abandoning a search.
    (ldap_op_process_current): wrap status messages in _().
    (ldap_op_process): same.
    (create_card_handler): same, and remove the notify_status for ""
    and add a notify_complete call after the card is added.
    (remove_card_handler): same.
    (modify_card_handler): same.
    (poll_ldap): wrap status messages with _(), and remove the "Search
    Complete" message.
    (ldap_search_handler): wrap status message.

    * backend/pas/pas-backend-file.c (pas_backend_file_search): use
    _() on status messages, and make sure the last notify_* called is
    notify_complete.

2001-09-05  Ettore Perazzoli  <ettore@ximian.com>

    [Fix #958, ShellComponents should not be created by factories, for
    the addressbook.]

    * gui/component/addressbook-component.c
    (GNOME_EVOLUTION_ADDRESSBOOK_COMPONENT_FACTORY_ID): Removed.
    (GNOME_EVOLUTION_ADDRESSBOOK_COMPONENT_ID): New.
    (create_component): Renamed from `factory_fn'.  Just register the
    thing on OAF.
    (addressbook_component_factory_init): Just call it.

    * gui/component/GNOME_Evolution_Addressbook.oaf.in: Remove the
    ShellComponentFactory.

2001-09-04  Iain Holmes  <iain@ximian.com>

    * backend/ebook/evolution-vcard-importer.c (load_file_fn): Return FALSE
    if the file isn't a valid VCard file.

2001-08-05  Zbigniew Chyla  <cyba@gnome.pl>

    I18n fixes (mainly making buttons on the right side less Anglocentric :-)

    * backend/ebook/e-card-simple.c
    (field_data): Marked "name" and "short_name" fields for translation.
    (e_card_simple_get_name, e_card_simple_get_short_name): Return
    localized version of the name (using U_() macro).

    * gui/contact-editor/e-contact-editor.c (set_entry_changed_signals):
    Connect "changed" signal from "entry-web" entry to widget_changed.
    (changing this field wasn't making "Save and Close" button sensitive)

    * gui/widgets/Makefile.am (glade_DATA): Removed alphabet.glade.

    * gui/widgets/e-addressbook-view.c
    (button_labels, button_letters): New strings containing a list of
    labels and "values" of all buttons placed on the right side of the
    addressbook view (intended for localization).
    (struct LetterClosure): Changed the type of letter field to gunichar.
    (e_utf8_split): New function, similar to g_strsplit, but operates on
    UTF-8 strings.
    (jump_to_letter): Don't hardcode letters, build queries dynamically
    using UTF-8 and localized letters stored in button_letters.
    (connect_button): Removed.
    (create_alphabet): Don't use glade file, build buttons manually using
    (localized) labels from button_labels. Use (localized) values from
    button_letters when creating LetterClosure.

    * gui/widgets/e-minicard-view-widget.[ch]
    (e_minicard_view_widget_jump_to_letter): Changed the type of the
    second argument from char to gunichar.

    * gui/widgets/e-minicard-view.c
    (compare_to_utf_str): Renamed from compare_to_letter, now operates on
    UTF-8 string.
    (e_minicard_view_jump_to_letter): Changed the type of the second
    argument from char to gunichar + conversion to UTF-8 string.

    * gui/widgets/e-minicard-view.h
    (e_minicard_view_jump_to_letter): Changed the type of the second
    argument from char to gunichar.

2001-09-02  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book.c (e_book_add_card, e_book_commit_card),
    backend/pas/pas-backend-file.c (do_create),
    backend/pas/pas-backend-ldap.c
    (create_card_handler, remove_card_handler, modify_card_handler,
    pas_backend_ldap_process_get_vcard, poll_ldap): Use
    e_card_get_vcard_assume_utf8 instead of e_card_get_vcard here
    since all internal communications and database storage are assumed
    to be utf8.

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h
    (e_card_simple_duplicate): Simplified this function considerably.
    (e_card_simple_get_vcard_assume_utf8): Added this function.

    * backend/ebook/e-card.c, backend/ebook/e-card.h (e_card_new,
    e_card_load_cards_from_file, e_card_load_cards_from_string): Made
    these functions pay attention to charset attributes.
    (e_card_new_with_default_charset,
    e_card_load_cards_from_file_with_default_charset,
    e_card_load_cards_from_string_with_default_charset): New functions
    that let you change the default charset from UTF-8.
    (e_card_get_vcard): Made this write out charset attributes when
    necessary.
    (e_card_get_vcard_assume_utf8): New function that writes out a
    card without writing out charset attributes.

    * backend/ebook/evolution-vcard-importer.c (book_open_cb),
    backend/ebook/load-gnomecard-addressbook.c (book_open_cb),
    backend/ebook/test-card.c (main),
    gui/component/addressbook-component.c
    (destination_folder_handle_drop), gui/contact-editor/test-editor.c
    (main), gui/contact-list-editor/e-contact-list-editor.c
    (table_drag_data_received_cb), gui/widgets/e-addressbook-view.c
    (selection_received), gui/widgets/e-minicard-control.c
    (pstream_load): Changed the default charset to be used here to
    ISO-8859-1.

    * backend/ebook/load-gnomecard-addressbook.c (add_card_cb),
    backend/ebook/load-pine-addressbook.c (add_card_cb),
    backend/ebook/test-client-list.c (get_cursor_cb),
    backend/ebook/test-client.c (get_cursor_cb, get_card_cb): Use
    e_card_get_vcard_assume_utf8 to print out testing strings.

    * gui/component/select-names/e-select-names-model.c,
    gui/component/select-names/e-select-names-model.h
    (e_select_names_model_contains): Changed this to be const
    EDestination *dest to fix a warning.

    * gui/contact-editor/e-contact-editor.c (e_contact_editor_init):
    Translate window title here.

2001-08-31  Zbigniew Chyla  <cyba@gnome.pl>

    * gui/component/addressbook-storage.c
    (addressbook_get_other_contact_storage): s/_/U_/

    * gui/widgets/e-addressbook-reflow-adapter.c (addressbook_compare):
    Use g_utf8_collate.

    * gui/widgets/e-minicard.c (e_minicard_compare):
    Ditto.

    * printing/e-contact-print.c (card_compare):
    Ditto.

2001-08-29  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_clicked): Use e_select_names_model_merge to
    combine the selected names with any existing ones.  This causes
    you to not lose addresses typed directly into the entry while the
    SelectNames dialog is up. (Bug #8058)

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_merge): Merge the contents of one
    ESelectNamesModel into another, avoiding duplicates.

    * backend/ebook/e-destination.c (e_destination_equal): Added.
    Determines if two destinations appear to refer to the same
    recipient.

    * backend/ebook/e-card.c (e_card_list_send): Added cast to
    g_free args to silence compiler warnings.

    * gui/contact-editor/e-contact-quick-add.c (quick_add_set_name):
    Paranoia.  Check that name != qa->name.
    (quick_add_set_email): Check that email != qa->email.
    (ce_have_book): Store the QuickAdd data structure in object data,
    so that we can be extra-careful and avoid having a dangling
    pointer floating around out somewhere as the closure for a signal.
    Fixes bug #8155, I think.
    (card_added_cb): Clear object data to ensure single unref.
    (editor_closed_cb): Clear object data to ensure single unref.

    * gui/component/select-names/e-select-names-completion.c
    (book_query_score): Make sure that comp->priv->query_text isn't
    NULL.  (Fixes bug #8195)

    * backend/ebook/e-book-listener.c (e_book_listener_check_queue):
    This function can be re-entrant during the signal emission; Added
    extra ref/unrefs and checks to avoid problems if this happens.
    This is similar to my recent changes to
    e_book_view_listener_check_queue.  (Fixes bug #7400)

2001-08-27  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook-component.c: Get rid of a warning by
    initializing the closing NULL element in folder_types correctly.

    * gui/component/select-names/e-select-names.c: Updated to match
    the studlyCapsification of attributes in shell/Evolution*.idl.

2001-08-27  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (sexp_file_as): Added.  Generated queries against file_as.
    (match_file_as): Added.  Match results of queries against
    file_as. (Bug #8152)

    * backend/ebook/e-book-view-listener.c
    (e_book_view_listener_check_queue): Added ref/unref pair to make
    sure that our listener doesn't get finalized during the signal
    emission and leave us with a dangling pointer. (Bug #7661)

    * backend/ebook/e-card.c (e_card_list_send): Removed some debugging
    spew that I left in by mistake.

    * gui/widgets/e-addressbook-model.c (create_card): Removed debugging
    spew.

    * backend/ebook/e-card.c (e_card_list_send): Do the right thing if
    the card we are trying to send to is a contact list. (Bug #6580)

2001-08-27  Zbigniew Chyla  <cyba@gnome.pl>

    * gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
    Display localized status string (added missing _()).

2001-08-24  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-destination.c (e_destination_set_card): Put a
    freeze/thaw around our the set of operations that changes the
    internal state of our card, so 'changed' signal callbacks won't be
    invoked on a card in an intermediary state.  This fixes the bug
    that was causing the e-mail addresses in cards to be blank when
    replying to a message.  (An unexpected side-effect of toshok's
    change on 8/22 to make sure that priv->email != NULL).
    (e_destination_get_name): Code slightly rearranged for (IMO)
    clarity.

2001-08-23  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard.c (e_minicard_event): add
    BUTTON_PRESS_MASK so double clicks still work.

2001-08-23  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c (addressbook_query_changed): switch
    "full_name" to "x-evolution-any-field" in all the queries where we
    want to match all cards, since the backends universally handle
    this special case more efficiently.

2001-08-22  Jon Trowbridge  <trow@ximian.com>

    * gui/contact-list-editor/e-contact-list-editor.c (extract_info):
    In the GUI, the toggle is labelled "hide addresses", not "show
    addresses" -- so we have to reverse the boolean value we read in.
    (fill_in_info): Same bug as before: since the GUI reads "hide", we
    have to initialize the toggle to '!show_addresses', not
    'show_addresses'.

    * backend/ebook/e-destination.c
    (e_destination_list_show_addresses): Added.
    (e_destination_xml_encode): Encode the value of
    e_destination_list_show_addresses into the XML.
    (e_destination_xml_decode): Read and store the "show_addresses"
    flag.

2001-08-22  jacob berkman  <jacob@ximian.com>

    * gui/component/e-address-popup.c (emit_event): emit an event from
    our event source
    (contact_editor_cb): emit a destroy event so our control frame can
    be destroyed.
    (edit_contact_info_cb): emit a hide event so our control frame can
    be hidden
    (e_address_popup_cardify):
    (add_contacts_cb): emit the destroy event
    (e_address_popup_factory_new_control): don't unref our object at
    widget destroy time as that was really really broken
    (e_address_popup_factory_new_control): create an event source and
    aggregate ourself with it

    * gui/contact-editor/e-contact-editor.c (enable_writable_fields):
    display a nicer warning when we can't find a widget for a given
    field
    (e_contact_editor_raise): only raise if there is a window

    * gui/contact-editor/contact-editor.glade: name some widgets that
    got unnamed, and set the first entry as defaultable

    * gui/contact-editor/e-contact-editor.c: envelope printing is
    disabled in 1.0

2001-08-22  Chris Toshok  <toshok@ximian.com>

    * backend/ebook/e-destination.c (e_destination_get_email): make
    sure we don't get into a situation where priv->email == NULL.

2001-08-21  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard.c (e_minicard_event): if we're dragging,
    drag_button_down won't be true in the BUTTON_RELEASE case, since
    we set it to false in MOTION_NOTIFY once the threshold is reached.
    (e_minicard_drag_end): remove this function, since it was needed
    to work around a bug in gnome-canvas.
    
2001-08-20  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names.c
    (e_addressbook_create_ebook_table): Wrap our addressbook table
    adapter in an ETableWithout, so that we can make addresses appear
    and disappear when we remove/add them to the section lists
    (To/Cc/Bcc) on the right of the dialog.
    (real_add_address_cb): When we add an address, hide it in the main
    list.
    (e_select_names_init): Get pointer to our without table from the
    table's object data, and store it.
    (remove_address): When we remove an address, show it in the main
    list.
    (card_key): Added.  Allocate a unique key from an ECard.
    (esn_get_key_fn): Added.  Callback for ETableWithout.
    (esn_dup_key_fn): Added.  Callback for ETableWithout.
    (esn_free_gotten_key_fn): Added.  Callback for ETableWithout.
    (esn_free_duped_key_fn): Added.  Callback for ETableWithout.

    * backend/ebook/e-card-simple.c (e_card_simple_get): Changed
    E_CARD_SIMPLE_FIELD_NAME_OR_ORG to first try the FILE_AS
    type.  This allows the cards in the ESelectName dialog to
    appear in proper sort order (i.e. as 'Doe, John' rather than
    'John Doe').  Fixes ximian #6002.

2001-08-20  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-addressbook-reflow-adapter.c
    (e_addressbook_reflow_adapter_class_init): fix arg info - we're
    only passing 1 GTK_TYPE_POINTER arg, not 2.

    * gui/widgets/e-minicard.c (e_minicard_event): lots of fixes for
    DnD.  For GDK_BUTTON_PRESS, we grab immediately.  For
    GDK_BUTTON_MOTION, we start the drag after a certain threshold,
    and connect to the "drag_end" signal on our canvas so we'll know
    when the drag is complete.  For GDK_BUTTON_RELEASE, we release the
    grab if we were dragging and get the event.
    (e_minicard_drag_end): new function, just remove the pointer/gtk
    grabs and disconnect.

    * gui/widgets/e-minicard.h (struct _EMinicard): add "gint
    drag_button"

2001-08-20  JP Rosevear  <jpr@ximian.com>

    * backend/pas/pas-backend-file.c
    (pas_backend_file_changes_foreach_key): use DB_NOTFOUND const
    
2001-08-20  JP Rosevear  <jpr@ximian.com>

    * backend/pas/pas-backend-file.c
    (pas_backend_file_process_get_changes): null out card_sexp so that
    we don't crash when copying

2001-08-20  JP Rosevear  <jpr@ximian.com>

    * conduit/address-conduit.c: fix warnings, get compiling again

    * conduit/address-conduit-config.h: remove c/p typos

    * conduit/address-conduit.h: ditto

    * conduit/Makefile.am: link against the static camel

2001-08-20  Damon Chaplin  <damon@ximian.com>

    * gui/contact-editor/e-contact-editor.c: use bigger Save icon for
    toolbar. Used Delete icon in menu.

    * gui/component/addressbook.c: use 'Save As' icon rather than 'Save'
    as it seems more appropriate. Also added delete icon for menu.

2001-08-19  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook-component.c: Update the folder list to
    include a display name and a description.

2001-08-19  Damon Chaplin  <damon@ximian.com>

    * gui/component/addressbook.c: use new Cut/Copy/Paste/Save/Search
    icons.

2001-08-19  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook.c (set_folder_bar_label),
    gui/widgets/e-addressbook-model.c,
    gui/widgets/e-addressbook-model.h (update_folder_bar_message),
    gui/widgets/e-addressbook-view.c, gui/widgets/e-addressbook-view.h
    (folder_bar_message): Set the folder bar message here.  Fixes
    Ximian bug #4670.

    * gui/component/select-names/e-select-names-model.c (SEPLEN): Use
    strlen(SEPARATOR) here so that if the separator changes the length
    will work properly.

2001-08-19  Christopher James Lahey  <clahey@ximian.com>

    * gui/contact-editor/fulladdr.glade: Added full country list.
    Fixes Ximian bug #5123.

2001-08-18  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook.c: Hook up `delete-message.png' as the
    icon for "ContactDelete".
    * gui/contact-editor/e-contact-editor.c: Likewise.

2001-08-17  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-storage.h: add prototype for
    addressbook_get_other_contact_storage.

    * gui/component/addressbook-storage.c
    (addressbook_get_other_contact_storage): rename register_storage
    to this, and return the EvolutionStorage.
    (load_source_data): register_storage =>
    addressbook_get_other_contact_storage.
    (addressbook_storage_add_source): register_storage =>
    addressbook_get_other_contact_storage.

2001-08-17  Chris Toshok  <toshok@ximian.com>

    * gui/contact-editor/e-contact-editor.c
    (set_entry_changed_signals): connect to the "changed" signal on
    "entry-web" to update command state.

2001-08-17  Chris Toshok  <toshok@ximian.com>

    * gui/contact-list-editor/e-contact-list-editor.c (list_added_cb):
    call e_card_set_id on the list's card so we can continue to use
    this dialog.  also, call command_state_changed if we aren't
    closing the dialog so the toolbar is properly sensitized.
    (list_deleted_cb): always close the dialog after we successfully
    delete a list.

    * gui/contact-editor/e-contact-editor.c (card_added_cb): call
    e_card_set_id on the card so we can continue to use this dialog
    (to modify or delete the card.)
    (card_deleted_cb): always close the dialog after we successfully
    delete a card.

2001-08-17  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c (addressbook_query_changed): call
    e_sexp_encode_string on the search string the user types in so it
    doesn't break sexp parsing in the wombat.

2001-08-17  Damon Chaplin  <damon@ximian.com>

    * gui/component/addressbook.c: changed to new print icon.

2001-08-17  Chris Toshok  <toshok@ximian.com>

    * gui/component/select-names/e-select-names.c: (struct
    ESelectNamesFolder): rename physical_uri to uri, since it includes
    the addressbook.db for file: uris.
    (e_select_names_folder_free): physical_uri => uri.
    (e_select_names_option_activated): physical_uri => uri, and we
    don't need to strdup_printf "addressbook.db" onto the end anymore.
    (new_folder): if the physical_uri is a file: uri, append
    /addressbook.db onto it.
    (hookup_listener): new function, split out lots of code from
    e_select_names_hookup_shell_listener.
    (e_select_names_hookup_shell_listeners): rename
    e_select_names_hookup_shell_listener to this, and hookup both the
    local and "Other Contacts" listener, using hookup_listener.
    (e_select_names_destroy): disconnect from the
    other_contacts_listener and unref it.

    * gui/component/select-names/e-select-names.h (struct
    _ESelectNames): add a listener for Other Contacts, and rename
    "listener" to "local_listener."

2001-08-17  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (e_select_names_completion_seq_complete_cb): If we get the
    "sequence_complete" signal when we aren't searching, it means the
    addressbook changed out from under us.  Clear the search cache, so
    that future completion requests won't use the out-of-date cached
    data.  Also, don't unref book_view... we leave the EBookView open
    so that we can catch these addressbook changes.
    (e_select_names_completion_do_query): Don't use the book_view
    being non-NULL as a sign that another query is still running.
    (e_select_names_completion_got_book_view_cb): Properly unref any
    previous value in book_view.

2001-08-17  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-reflow-adapter.c
    (e_addressbook_reflow_adapter_right_click),
    gui/widgets/e-addressbook-view.c (table_right_click): Changed the
    messages here in the right click menus.

2001-08-17  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (view_destroy): unref our
    card_sexp.
    (create_card_handler): make sure to set the id of the vcard so it
    gets properly transmitted back to the BookView, and notify all
    matching BookViews to add the created card.
    (remove_card_handler): notify all matching BookViews to remove the
    card.
    (modify_card_handler): notify all matching BookViews to modify the
    card.
    (pas_backend_ldap_process_get_book_view): init card_sexp based on
    the view's search.

2001-08-17  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-file.c
    (pas_backend_file_book_view_copy): use card_sexp.
    (pas_backend_file_book_view_free): same.
    (vcard_matches_search): use the new pas_backend_card_sexp_match_vcard call.
    (pas_backend_file_search): use card_sexp.
    (pas_backend_file_process_get_book_view): same.

    * backend/pas/Makefile.am (libpas_a_SOURCES): add
    pas-backend-card-sexp.[ch].

2001-08-17  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook-component.c (factory_fn): Added code
    so the user can create a new contact or contact list from anywhere
    in evolution.

2001-08-16  Jeffrey Stedfast  <fejj@ximian.com>

    * backend/pas/evolutionperson.schema: Added a closing paren.

2001-08-16  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (e_select_names_completion_handle_request): Renamed from _begin to
    match changes in gal 0.10.99.3.

    * gui/contact-editor/e-contact-quick-add.c (e_contact_quick_add): 
    Check that name != NULL before we start messing with it.
    (Fixes bug #7329)

2001-08-16  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (match_nickname): Boost scoring on an exact nickname match.
    Manually addressify match.
    (match_name): Manually addressify matches.
    (book_query_score): Remove automatic addressification.

    * gui/component/addressbook.c (addressbook_query_changed): Minor
    tweak to avoid a crash if we have a negative subid with id
    ESB_CATEGORY.  This should never happen.
    (addressbook_menu_activated): Reset the entry/option when we
    select "Clear".
    Some changes to reflect renaming in ESearchBar.

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_set_property_fn): Cardify after importing destinations.
    This might fix a problem that Damon is having.
 
2001-08-15  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-config.glade: set title of initial
    dialog to Addressbook Sources (bug #6704).

2001-08-15  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-storage.c (create_ldap_folder): don't
    let people add subdirs in the ldap server storage - everything is
    toplevel there.

2001-08-14  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_process_get_vcard): implement using
    search_for_dn.

2001-08-14  Federico Mena Quintero  <federico@ximian.com>

    * gui/component/addressbook.c (addressbook_factory_new_control):
    Tell the search bar to translate the subitem texts.

2001-08-14  Jon Trowbridge  <trow@ximian.com>

    * gui/component/addressbook.c (addressbook_factory_new_control):
    Add "Any Category" option for category searches.
    (addressbook_query_changed): Do the right thing on an
    "Any Category" search.

2001-08-14  Dan Winship  <danw@ximian.com>

    * backend/pas/pas-backend-ldap.c: Fix up to match the
    pas_book_new/get_vcard changes.

2001-08-14  Christopher James Lahey  <clahey@ximian.com>

    * gui/merging/e-card-merging-book-commit-duplicate-detected.glade:
    Got rid of an extraneous _ here.

    * gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
    Changed Canceled to Cancelled here.  Fixes Ximian bug #2465.

2001-08-14  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-book.c (pas_book_respond_get_vcard): Oops,
    forgot to write this function.

2001-08-14  Christopher James Lahey  <clahey@ximian.com>

    * gui/contact-editor/contact-editor.glade: Added focus targets
    here.  Fixes part of Ximian bug #5843.

2001-08-14  Christopher James Lahey  <clahey@ximian.com>

    * gui/contact-editor/e-contact-editor.c (e_contact_editor_init):
    Grab focus here.  Fixes Ximian bug #2265.

2001-08-14  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook.c (addressbook_factory_new_control): 
    (addressbook_query_changed): Fixed two const warnings here.

    * printing/e-contact-print-envelope.c,
    printing/e-contact-print-envelope.h: Fixed some missing includes
    here.

2001-08-14  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book-view.c (add_book_iterator): Call
    e_card_set_book here.

    * backend/ebook/e-book.c (e_book_do_response_get_vcard): Call
    e_card_set_book here.

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Pulled out the
    part where the uri is made part of the uid.  Made uri a separate
    field.  Fixes Ximian bug #6490.

    * backend/ebook/e-destination.c, backend/ebook/e-destination.h:
    Change this to use ECard's split uids and uris.

2001-08-13  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (add_to_supported_fields): don't
    g_strdup the stuff we're passing into e_list_append, since it does
    the copy for us.
    (check_schema_support): don't initialize supported_fields list
    here, since there's a gross case where the programmer/user can
    bring up the contact editor before the connection stuff is
    finished, and we don't want to crash.
    (pas_backend_ldap_init): move it here to we can guarantee it's
    there. (bug #6546).

2001-08-13  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-config.c
    (addressbook_source_dialog_set_source): don't access source->auth
    if source == NULL (bug #7086).

2001-08-13  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book-listener.c,
    backend/ebook/e-book-listener.h, backend/ebook/e-book.c,
    backend/ebook/e-book.h, backend/idl/addressbook.idl,
    backend/pas/pas-backend-file.c, backend/pas/pas-book.c,
    backend/pas/pas-book.h: Changed get_card to be asyncronous.

    * backend/ebook/e-card.c, backend/ebook/test-client.c: Changed
    these to deal with the new get_card functionality.

2001-08-11  Kjartan Maraas  <kmaraas@gnome.org>

    * gui/component/select-names/e-select-names.c: Mark a string for translation.
    * This fixes bug #7052
    * printing/e-contact-print.h: Add headers to make it stand on itw own.
    * printing/e-contact-print.c: Marked some strings for translation.
    * printing/e-contact-print-envelope.c: Same here.
    
2001-08-10  Jon Trowbridge  <trow@ximian.com>

    * gui/contact-editor/e-contact-quick-add.c (e_contact_quick_add):
    Remove single- or double-quotes from names before sticking them
    into the addressbook. (Bug #6499)

    * gui/component/addressbook.c (addressbook_query_changed):
    Properly handle "Category is" queries by checking the search bar
    suboption.
    (addressbook_factory_new_control): Attach subitems corresponding
    to all wombat categories to the "Category is" ESearchBarItem.

    * gui/component/addressbook.c: Set the ESearchBarItem
    subitems explicitly to NULL.

2001-08-10  Anna Marie Dirks <anna@ximian.com>
     * gui/component/select-names/select-names.glade: did a little
    packing-magic to get the two tables at bottom of this dialog
    to seem to line up. 

    *gui/component/select-names/e-select-names.c: changed the title
    of this dialog to "Select Contacts from Addressbook". 

2001-08-09  Anna Marie Dirks <anna@ximian.com>
        * gui/component/select-names/select-names.glade: redesigned
        this dialog to fix bug #6815. 

    *gui/component/select-names/e-select-names.c: connected the
    widgets (or one of them anyway. clahey did the rest) for my
    new and lovely glade file.
    
2001-08-09  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c: remove passwd_cb.

2001-08-09  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-text-model.c
    This change is dedicated to Jacob Berkman.
    (e_select_names_text_model_insert_length): If the last character
    we inserted was a "magic comma", remember its position.
    (e_select_names_text_model_delete): If the last character we
    inserted was a "magic comma", and if the next thing we do is to
    hit backspace, delete both the comma and the extra whitespace we
    added.
    (e_select_names_text_model_init): Initialize our last magic comma
    position.

2001-08-09  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_manager_create_entry): Hook up some magic to
    (basically) cardify an entry on focus-out.  (What we do is actually
    more complicated than that.)

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_set_property_fn): After we set an entry's text, try to
    cardify it.  We need to do this so that (for example) reply
    e-mails get properly cardified.

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_duplicate): Use e_select_names_model_append,
    rather than manipulating lists directly.
    (e_select_names_model_insert): Connect "changed" signal proxy for
    added EDestination.
    (e_select_names_model_append): Ditto.
    (e_select_names_model_replace): Ditto, and disconnect signals for
    replaced EDestination.
    (e_select_names_model_delete): Ditto on the disconnection.
    (e_select_names_model_delete_all): Ditto.
    (e_select_names_model_cardify): Added.  Try to cardify a specified
    EDestination.
    (e_select_names_model_cancel_cardify): Added.  Cancel the pending
    cardification of a single EDestination.
    (e_select_names_model_cardify_all): Added.  Cardify all of the
    EDestinations in the model.
    (e_select_names_model_cancel_cardify_all): Added.  Cancel's any
    and all pending cardifications.

    * backend/ebook/e-destination.c (e_destination_class_init): Added
    "changed" and "cardified" signals.
    (e_destination_freeze): Added (static).
    (e_destination_thaw): Added (static).
    (e_destination_clear_card): Reset allow_cardify and
    cannot_cardify, cancel any pending cardifications, and emit the
    "changed" signal.
    (e_destination_clear_strings): Emit the "changed" signal.
    (e_destination_clear): Do freeze/thaw to prevent multiple signal
    emissions.
    (e_destination_set_card): Check that the card we are setting is
    not equal to the current card, and emit the "changed" signal if we
    are actually changing.
    (e_destination_set_card_uri): Emit "changed" signal, if necessary.
    (e_destination_set_name): Emit "changed" signal, if necessary.
    (e_destination_set_email): Emit "changed" signal, if necessary.
    (e_destination_set_html_mail_pref): Emit "changed" signal, if
    necessary.
    (use_card_cb): If we've just loaded/set the ECard, emit the
    "changed" signal.
    (e_destination_set_raw): Emit "changed" signal, if necessary.
    (e_destination_allow_cardification): Added.
    (e_destination_set_allow_cardification): Added.
    (e_destination_cardify): Added.  Tries to automatically convert
    a string-based EDestination to one based on an ECard.
    (e_destination_cardify_delayed): Added.  Cardifies in a timeout.
    (e_destination_cancel_cardify): Added.  Cancels any pending
    cardifications.
    (e_destination_xml_decode): Added freeze/thaw.

    * backend/ebook/e-book-util.c (e_book_nickname_query): Added.  A
    canned simple query for nicknames.

    * backend/ebook/e-card.c (e_card_email_find_number): Added.  Given
    a card and an string containing an email address, return the index
    number of the address inside of the card, or -1 if the address is
    not found.

2001-08-09  Chris Toshok  <toshok@ximian.com>

    [ Fixes ximian bugs #5080, #6021, #6704, #6705 ] 
    
    * gui/component/addressbook.c (book_open_cb): create our own
    dialog that prompts for both the email address and the password.
    the email address is stored in the source and filled in for the
    user after the first time they enter one and press OK.

    * gui/component/addressbook-storage.c (create_ldap_folder): has a
    return value, not a int* parameter.
    (create_ldap_folder): new function, we can create ldap servers
    from the File->New->Folder menu item now.
    (register_storage): hook up the "create_folder" signal.
    (addressbook_storage_init_source_uri): remove the file case, we
    only build ldap uris here.
    (load_source_data): remove the file source stuff, and handle
    "emailaddr".
    (save_source_data): call ldap_source_foreach directly.
    (addressbook_source_free): remove file source stuff.
    (addressbook_source_copy): same.

    * gui/component/addressbook-storage.h: get rid of all the file
    source stuff from AddressbookSource, since this is only being used
    for ldap servers.

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_process_authenticate_user): look up the ldap
    entry based on the provided email address and use the resulting
    DN/passwd to authenticate.

    * gui/component/addressbook-config.c: pretty much gutted to make
    it work with the new UI.

    * gui/component/addressbook-config.glade: new version from anna.
    
2001-08-09  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-view.c (SPEC): Upped the minimum width
    on all addressbook columns to 75.  Fixes Ximian bug #2773.

2001-08-08  Chris Toshok  <toshok@ximian.com>

    * gui/contact-editor/e-contact-quick-add.c (ce_have_book): mark
    the dialog as changed so the save button is immediately available.

    * gui/contact-editor/e-contact-editor.c (card_modified_cb): once
    we save reset the change flag to false if we aren't closing the
    dialog.
    (card_added_cb): same.
    (e_contact_editor_class_init): add a "changed" arg.
    (e_contact_editor_set_arg): add setter for "changed".
    (e_contact_editor_get_arg): add getter for "changed".

2001-08-08  Chris Toshok  <toshok@ximian.com>

    * gui/contact-editor/e-contact-quick-add.c (ce_have_book): better
    to assume that we can write to the local addressbook than that we
    can't write to it :)

2001-08-08  Chris Toshok  <toshok@ximian.com>

    * gui/contact-list-editor/e-contact-list-editor.c (create_ui):
    call e_pixmap_update so we can use the same save/save-as pixmaps
    as the contact editor.

2001-08-08  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-addressbook-reflow-adapter.c (open_card): new
    function, used by the context menu.
    (e_addressbook_reflow_adapter_right_click): put "Open" at the top
    of the menu.  also, disable "Delete" if the addressbook isn't
    writable.

2001-08-08  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (rfc2254_escape): escape *, \, (,
    and ), as per rfc2254.
    (func_contains): escape the string.
    (func_is): same.
    (func_beginswith): same.
    (func_endswith): same.

2001-08-08  Nat Friedman  <nat@ximian.com>

    * gui/widgets/e-addressbook-reflow-adapter.c (print_envelope): If 0'd out
    since Envelope printing is disabled for 1.0.    
    * gui/widgets/e-addressbook-view.c (print_envelope): Likewise.
    * gui/contact-editor/e-contact-editor.c (print_envelope_cb): Likewise.

    * gui/widgets/e-addressbook-reflow-adapter.c
    (e_addressbook_reflow_adapter_right_click): Removed "Print
    Envelope" menu item.
    * gui/widgets/e-addressbook-view.c (table_right_click): Likewise.
    * gui/contact-editor/e-contact-editor.c (verbs): Likewise.

2001-08-07  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-storage.c (remove_ldap_folder): ifdef
    this HAVE_LDAP.

2001-08-07  Chris Toshok  <toshok@ximian.com>

    * gui/search/e-addressbook-search-dialog.c
    (e_addressbook_search_dialog_init): set the title of the window to
    "Advanced Search".

2001-08-07  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c (search_cb): pass view->view instead
    of the EBook.
    (addressbook_search_menu_items): remove E_FILTERBAR_ADVANCED.
    (addressbook_menu_activated): remove E_FILTERBAR_ADVANCED.
    (addressbook_search_option_items): add "Advanced..." here.
    (addressbook_query_changed): add special handling for Advanced...

    * gui/search/e-addressbook-search-dialog.h (struct
    _EAddressbookSearchDialog): add EAddressbookView and remove the
    model/adapter fields.  Also fix prototype of
    e_addressbook_search_dialog_new.

    * gui/search/e-addressbook-search-dialog.c
    (e_addressbook_search_dialog_class_init): get rid of
    set_arg/get_arg.
    (button_press): set the query on the EAddressbookView, and always
    close the dialog.
    (e_addressbook_search_dialog_init): get rid of the minicard view,
    and pack the other widgets accordingly.
    (e_addressbook_search_dialog_new): pass EAddressbookView instead
    of EBook.
    (e_addressbook_search_dialog_destroy): remove model/adapter stuff.

2001-08-07  Chris Toshok  <toshok@ximian.com>

    [ Fixes bug #5066 ]
    * gui/component/addressbook-storage.c (remove_ldap_folder): new
    function, remove the source.
    (register_storage): connect to the "remove_folder" signal so we
    know when to remove the folder.

2001-08-07  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (build_card_from_entry): use
    g_strcasecmp since ldap attribute names are not case sensitive.

2001-08-07  Chris Toshok  <toshok@ximian.com>

    * gui/contact-list-editor/e-contact-list-editor.c
    (table_drag_data_received_cb): make sure we update the changed
    state if a successful drop happens.

2001-08-07  Jason Leach  <jleach@ximian.com>

    * gui/component/select-names/e-select-names.c
    (e_select_names_init): Make the OK button the keyboard default
    instead of Cancel.  Bug #4942.

2001-08-06  Radek Doulik  <rodo@ximian.com>

    * backend/ebook/e-book.c (e_book_op_free): new EBookOp destructor
    (e_book_unqueue_op): use e_book_op_free
    (e_book_do_response_create_card): ditto
    (e_book_do_response_generic): ditto
    (e_book_do_response_get_cursor): ditto
    (e_book_do_response_get_view): ditto
    (e_book_do_response_get_changes): ditto
    (e_book_do_response_open): ditto
    (e_book_do_response_get_supported_fields): ditto

2001-08-05  Radek Doulik  <rodo@ximian.com>

    * backend/ebook/e-book.c (e_book_do_response_get_view): set
    op->listener to NULL to catch possible use of freed op
    (e_book_do_response_get_changes): ditto

    * backend/ebook/e-book-view-listener.c
       (e_book_view_listener_check_queue): this callback could be (and
       indeed is) called from signal emited above, 
       signal handler could call e_book_view_listener_stop, so we need to check
       if idle is still set and if not we don't want to unref again

2001-08-04  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card-compare.c (e_card_compare_name): Made it so
    that if there's one less match than possible compares are
    considered more VAGUE.  Fixes Ximian bug #3400.

2001-08-03  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names.c
    (e_select_names_hookup_shell_listener): Check for storage != NULL
    here.  This shouldn't come up unless addressbook has crashed
    previously within this session of evolution, but this is just a
    bit of insurance.  Fixes Ximian bug #3699.

2001-08-03  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card.c (e_card_name_match_string): Changed the
    criteria of whether the first part of each iteration matched or
    the second one did.  Before it got it wrong sometimes and caused
    the pointer to jump off the end of the array.  Fixes Ximian bug
    #4674.

2001-08-03  Jason Leach  <jleach@ximian.com>

    * gui/component/addressbook-storage.c (load_source_data): Update
    for EvolutionStorage API changes.
    (addressbook_storage_add_source): Ditto.

2001-08-03  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-view.c (jump_to_letter): Made this
    change the query based on which letter is clicked.  Fixes Ximian
    bug #2202.

2001-08-03  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook.c (addressbook_factory_new_control):
    Fixed warnings here.

    * gui/component/select-names/e-select-names-completion.c
    (hash_cleanup_fn): Removed this unused function.

2001-08-03  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card-simple.c (e_card_simple_sync_card,
    fill_in_info): Made the list of E_CARD_PHONE types in
    phone_correspondences more complete by adding the new 5
    E_CARD_PHONE types.  Also, made it a bit less restrictive for some
    types (E_CARD_PHONE_HOME will actually match
    E_CARD_SIMPLE_PHONE_ID_HOME now.)  Made e_card_simple_sync_card
    and fill_in_info search for an exact match in the list of
    phone_correspondences and then look for a partial match.  Got rid
    of not going forward when doing a remove from an EList since EList
    handles this case automatically.

    * backend/ebook/e-card-types.h: Added E_CARD_PHONE types for
    assistant, callback, radio, telex, and ttytdd.

    * backend/ebook/e-card.c (get_phone_flags, set_phone_flags):
    Handle the new E_CARD_PHONE types.

2001-08-02  Jon Trowbridge  <trow@ximian.com>

    * printing/Makefile.am (ecpsdir): Add camel dependency.

    * gui/component/Makefile.am: Add camel dependency.

    * backend/ebook/Makefile.am: Add camel dependency.

    * gui/component/addressbook-factory.c (main): Properly init camel.

    * backend/ebook/e-destination.c (e_destination_clear_strings):
    Clear ->raw.
    (e_destination_is_empty): We aren't empty if ->raw is set..
    (e_destination_set_raw): Replaces e_destination_set_string.
    (e_destination_get_name): Use camel's parser to extract the name
    from ->raw.
    (e_destination_get_email): Use camel's parser to extract the email
    address from ->raw.
    (e_destination_get_address): Use camel to produce properly quoted,
    RFC-compliant addresses.  Thanks camel! (Bug #5860)

    * gui/component/select-names/e-select-names-completion.c
    (emailify_match): Always append an e-mail address, as long as it
    doesn't have one already at it's beginning or end.  Don't limit
    self to just emailifying entries tied to cards with multiple
    addresses.  (I didn't really want to do this, but people seem to
    like keeping multiple cards for the same person, and other
    solutions (like scanning all matches for duplicate names, and only
    emailifying those) just seemed like way too much work for such a
    limited payoff.)

    * gui/component/select-names/e-select-names-text-model.c:
    s/e_destination_set_string/e_destination_set_raw/.

    * gui/component/select-names/e-select-names-popup.c
    (popup_menu_card): Quote _'s in our popup menus, so that "foo_bar"
    doesn't get displayed as "foobar" w/ the 'b' underlined. (Bug
    #5558)
    (popup_menu_nocard): Ditto.

2001-08-02  Jason Leach  <jleach@ximian.com>

    * gui/component/addressbook.c (addressbook_factory_new_control):
    Removed some extra padding and pack the addressbook view into a
    frame with inward shadowing, just because it looks prettier.

    * gui/contact-editor/e-contact-editor.c: Use the updated Save,
    Save As, and Print icons for the menus and toolbar.

2001-08-02  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook.c: Added ContactsSaveAsVCard,
    ContactsSendContactToOther, and ContactsSendMessageToContact verbs
    here.

    * gui/widgets/e-addressbook-view.c,
    gui/widgets/e-addressbook-view.h (e_addressbook_view_save_as,
    e_addressbook_view_send, e_addressbook_view_send_to): New
    functions to allow outside users to cause the addressbook to save,
    send, or send a message to its selection.

2001-08-01  Christopher James Lahey  <clahey@ximian.com>

    * contact-editor/.cvsignore: Removed this file from this unused
    directory.

2001-08-01  Christopher James Lahey  <clahey@ximian.com>

    * gui/contact-editor/Makefile.am: Added file-exists.glade.

    * gui/contact-editor/e-contact-save-as.c (file_exists),
    gui/contact-editor/file-exists.glade: Added a dialog to ask the
    user whether to replace an already existing file.  Mostly from a
    patch by Jos Dehaes.  Fixes Ximian bug #2231.

2001-08-01  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book-view-listener.c
    (e_book_view_listener_check_queue): Removed thrash checking code
    here since thrashing shouldn't happen now that we've cleaned this
    up some.

    * backend/ebook/e-book.c (e_book_do_response_get_view): Properly
    handle cases where construction fails.

2001-07-30  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/evolution-vcard-importer.c: Added #include
    <e-util/e-path.h>.

2001-07-23  Zbigniew Chyla  <cyba@gnome.pl>

    * gui/component/addressbook-config.c (addressbook_source_dialog):
    Convert translated string to UTF8 before calling put_html.

2001-07-30  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (e_select_names_completion_do_query): Properly handle the case
    where our "cleaned" completion is the empty string.  This happens,
    for example, if the query text is the string "\"".  (Bug #5610).

    * backend/ebook/e-destination.c (e_destination_get_address_textv):
    Reassure fejj that I'm not doing something stupid here.
    (e_destination_get_address): Fix address quoting.  This is a
    stop-gap measure until I can change this code to use Camel's
    superior address-handling routines.  (Also Bug #5610)

2001-07-30  Jason Leach  <jleach@ximian.com>

    * gui/component/addressbook-storage.c (load_source_data): Fix a
    return value bug, to make it so if it fails to load an
    addressbook-sources.xml file (either a parse error or it doesn't
    exist for example), it deregisters the storage.
    (register_storage): Don't make a storage for users who don't have
    LDAP support built in.  Bug #1950.

2001-07-30  Frederic Crozat  <fcrozat@mandrakesoft.com>

    * addressbook/gui/component/addressbook-factory.c: Fix crashes
    when gtkhtml is compiled with gconf support

2001-07-27  JP Rosevear  <jpr@ximian.com>

    * conduit/Makefile.am: Tidy ldadds

2001-07-26  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-bonobo.c: Fixing a
    small, stupid mistake; use e_select_names_model_get_textification
    for the getter for "text".

    * backend/ebook/e-card.c: Removed some debugging chatter.

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_manager_create_entry): Store the completion
    handler in the entry's object data.

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_get_property_fn): Added support for getting "destinations"
    and "allow_contact_lists" properties.
    (entry_set_property_fn): Added support for setting "destinations"
    and "allow_contact_lists" properties.
    (impl_SelectNames_get_entry_for_section): Added definitions for
    "destinations" and "allow_contact_lists" properties.

    * gui/component/select-names/e-select-names-completion.c
    (e_select_names_completion_get_match_contact_lists): Added.
    (e_select_names_completion_set_match_contact_lists): Added.
    Controls whether contact lists are offered as options during
    completion.
    (book_query_process_card_list): Check if match_contact_lists
    is set before (duh!) matching on a contact list.
    (e_select_names_completion_init): Set match_contact_lists
    to TRUE by default.

2001-07-25  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (func_contains): change the way
    x-evolution-any-field is converted to an ldap query.  it used to
    be we'd nest queries like: (|(|(|(foo=*x*))(bar=*x*))(baz=*x*)).
    now we build it like: (|(foo=*x*)(bar=*x*)(baz=*x*)).  much more
    efficient (both in the building, and on the server side no doubt).

2001-07-25  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-destination.c (e_destination_get_name): Properly dup
    the results of e_destination_get_email.

    * gui/component/select-names/e-select-names-popup.c
    (e_select_names_popup): Check that our destination isn't empty
    before building our popup. (Bug #5250)

    * backend/ebook/e-destination.c (e_destination_is_empty): Made
    argument const.

2001-07-24  Jon Trowbridge  <trow@ximian.com>

    * gui/contact-list-editor/e-contact-list-model.c: Added checks
    for all of the args of the exposed functions, so that
    we won't crash on bad inputs.  (Related to bug #4856.)

2001-07-24  Jason Leach  <jleach@ximian.com>

    * gui/merging/e-card-duplicate-detected.glade: "_Add Anyway" to
    "Add Anyway".

2001-07-24  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-destination.c (e_destination_get_name): Added
    fallbacks for the name in the case of an e-card, to avoid the
    "nameless contact" bug.

2001-07-24  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard.c (remodel): need the EDestination magic
    here too for when we modify an already shown card.

    * gui/contact-list-editor/e-contact-list-model.c: make
    parent_class static, just to be anal.

    * gui/contact-list-editor/e-contact-list-editor.c
    (remove_entry_cb): removing entries changes the list, so flag it.
    (table_drag_data_received_cb): restrict cards we add to lists to
    be non-list cards.
    (extract_info): clear out the email list in the card before we
    repopulate it from the contact list model.
    (fill_in_info): set the checkbox to active/inactive based on
    thecard.

2001-07-24  Chris Toshok  <toshok@ximian.com>

    * gui/contact-editor/e-contact-editor.c (wants_html_changed): call
    widget_changed.
    (phone_entry_changed): same.
    (email_entry_changed): same.
    (address_text_changed): same.
    (name_entry_changed): same.
    (company_entry_changed): same.
    (widget_changed): new function that we can either call or set as a
    signal to change the "changed" flag on the dialog.
    (set_entry_changed_signals): connect lots of "changed" signals on
    widgets to widget_changed.
    (add_lists): connect "changed" to widget_changed.

2001-07-24  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names.c
    (e_select_names_hookup_shell_listener): Check if
    evolution_shell_client_get_local_storage returns CORBA_OBJECT_NIL,
    which it should never do.  If it does, print a warning in a dialog
    and try to recover w/o crashing.  (Bug #5193)

2001-07-24  Dan Winship  <danw@ximian.com>

    * backend/ebook/e-book-listener.c (e_book_listener_stop): Don't
    stop the idle_queue and unref from here, since this might be
    called from inside e_book_listener_check_queue, and we don't want
    to return to that function with the listener having been
    destroyed.
    (e_book_listener_check_queue): Don't exit early if the queue is
    stopped. Proceed through the check if the queue is NULL (which is
    must be if the queue is stopped), and then reach the existing code
    to remove the idle handler. Combined with the above, this fixes
    ximian #4485 (again). This is not a plot to boost my
    showstopper-bugfixing count by fixing the same bug over and over
    again.

2001-07-23  Dan Winship  <danw@ximian.com>

    Re-fix for my 07-18 not-quite-fix.

    * backend/ebook/e-book-listener.c: Add a "stopped" flag like
    EBookViewListener.
    (e_book_listener_check_queue): Don't emit signals if the listener
    is stopped.
    (e_book_listener_queue_generic_response, etc): Don't queue
    responses if the listener is stopped.
    (e_book_listener_stop): Flush the queue and stop queue/emitting
    further responses.

    * backend/ebook/e-book.c (e_book_unload_uri): Revert the previous
    change and call e_book_listener_stop() instead.

    * backend/ebook/e-book-view-listener.c
    (e_book_view_listener_stop): When removing an idle handler, unref
    the listener as well, since e_book_view_listener_queue_response
    will have ref'ed it.

2001-07-22  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook-component.c (remove_folder): Add a
    @type arg.  If the type is not "contacts", report an
    `UNSUPPORTED_TYPE' error through the listener.  Also, remove
    `g_print()' debugging messages.
    (xfer_folder): Likewise.

2001-07-21  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook-component.c: Make the "contacts"
    folders user-creatable by setting `user_creatable' to %TRUE in the
    `EvolutionShellComponentFolderType's.

2001-07-18  Chris Toshok  <toshok@ximian.com>

    [ patch contributed by Jos Dehaes <jos.dehaes@bigfoot.com> ]
    
    * gui/component/addressbook-storage.c (register_storage): new
    function, register our evolution_storage.
    (addressbook_storage_setup): remove storage registration from
    here.
    (load_source_data): register the storage here before we load
    addressbook-sources.xml, and deregister it if there are no sources
    listed.
    (addressbook_storage_remove_source): unregister the storage if the
    list of sources hits 0 length.

2001-07-18  Dan Winship  <danw@ximian.com>

    * backend/ebook/e-book.c (e_book_unload_uri): Flush the listener's
    queue before unreffing it to ensure that it doesn't emit any more
    "responses_queued" signals after the EBook is destroyed.

    * backend/ebook/e-book-listener.c (e_book_listener_check_queue,
    e_book_listener_queue_response, e_book_listener_new): Use
    bonobo_object_ref/unref rather than gtk_object_ref/unref.

    * backend/ebook/e-book-view-listener.c
    (e_book_view_listener_queue_response, e_book_view_listener_new):
    Likewise.

2001-07-18  Chris Toshok  <toshok@ximian.com>

    * backend/ebook/e-card-compare.c (simple_query_cb): prune the list
    of cards that match our query using the avoid list here, instead
    of using the avoid list in the query itself, since ldap can't
    handle that.
    (use_common_book_cb): remove the block of code including the avoid
    list in the query sent to wombat.

2001-07-17  Chris Toshok  <toshok@ximian.com>

    [ Fixes bugs #4611 - crash searching in the name field at Bigfoot for "\"
            and  #4554 - general ldap search crash ]
    
    * backend/pas/pas-backend-ldap.c (func_contains): the length of
    the big query string needs to take into account the length of the
    footer as well as the header - fix random memory corruption here.

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_build_query):
    list can be NULL, specifically if there's a parsing error in the
    sexp, so deal with it.

2001-07-17  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-book-view-listener.c
    (e_book_view_listener_queue_response): Hold a reference to our
    listener while the idle function is active.
    (e_book_view_listener_check_queue): Only unref the listener when
    the idle function is finished.

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_clicked): Instead of replacing section->model with
    source, copy source onto section->model with
    e_select_names_model_overwrite_copy.  #if 0/#endif out all of the
    stuff related to ETextModels, because it doesn't make any sense to
    me, and everything appears to work without it.
    (Die bug #2059.  Die! Die! Die!)

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_overwrite_copy): Added.  Copies the contents
    of one ESelectNamesModel onto another.

    * backend/ebook/e-destination.c (e_destination_copy): Made the argument
    const.

    * backend/ebook/e-destination.c (e_destination_set_string): Removed
    old, broken code and annoying g_messages.

    * backend/ebook/e-book-listener.c
    (e_book_listener_queue_response): Hold a reference to the listener
    while the idle function is active.
    (e_book_listener_check_queue): Only release our reference to the
    listener when the queue is empty.  These two changes fix a race
    condition, since the listener could be unrefed while the listener
    was still active. (Seems to fix bug #4485)

2001-07-17  Christopher James Lahey  <clahey@ximian.com>

    * gui/contact-editor/contact-editor.glade,
    gui/merging/e-card-duplicate-detected.glade,
    gui/merging/e-card-merging-book-commit-duplicate-detected.glade,
    printing/e-contact-print.glade: Patch from Taylor Hayward
    <thayward@gjpc.com>.  Added accelerators to a few dialogs.

2001-07-16  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/Evolution-Addressbook-SelectNames.idl:
    Added addSectionWithLimit to the SelectNames interface.

    * gui/component/select-names/e-select-names-bonobo.c
    (impl_SelectNames_add_section_with_limit): Added.  Implements
    addSectionWithLimit.
    (e_select_names_bonobo_construct): Set up as a BonoboEventSource.
    (init): Listen for "changed" signals from our manager.
    (manager_changed_cb): Notify our listeners if we get a changed
    signal from our manager.

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_manager_class_init): Added a "changed" signal".
    (section_copy): Propogate the signal connection.
    (section_free): Disconnect the changed handler.
    (e_select_names_manager_add_section_with_limit): Connect to the
    new section's model, listening for changes.
    (e_select_names_manager_activate_dialog): Connect to the "working
    copy" model, listening for changes.
    (e_select_names_manager_add_section_with_limit): Added.
    (e_select_names_manager_add_section): Changed to just be a special
    case of e_select_names_manager_add_section_with_limit.

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_set_limit): Added.  Allows a max number of
    names allowed in the model.
    (e_select_names_model_get_limit): Added.  Returns the limit.
    (e_select_names_model_at_limit): Added.  Returns TRUE if the
    model is "full".
    (e_select_names_model_insert): Check that we aren't at the
    limit before inserting.  Silently return if we are.
    (e_select_names_model_append): Check that we aren't at the
    limit before appending.  Silently return if we are.

2001-07-16  Chris Toshok  <toshok@ximian.com>

    [ Fix bug #4705 - LDAP storage gets saved with corrupted binddn]
    
    * gui/component/addressbook-config.c (addressbook_dialog_apply):
    call addressbook_storage_write_sources here after we're done
    rebuilding them.

    * gui/component/addressbook-storage.c
    (addressbook_storage_clear_sources): don't write the source file
    here.
    (addressbook_storage_add_source): same.
    (addressbook_storage_remove_source): same.
    (addressbook_storage_write_sources): new function, write the
    source file out.
    (addressbook_source_copy): g_strdup the binddn so we don't end up
    free'ing it multiple times thanks to copies freeing theirs.

    * gui/component/addressbook-storage.h: add prototype for
    address_storage_write_sources.

2001-07-16  Iain Holmes  <iain@ximian.com>

    * backend/pas/evolution-vcard-importer.c (ebook_create): Don't just 
    use the default directory. Use the directory that is passed into the
    load file function.

2001-07-15  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-destination.c (e_destination_set_string):
    Commented out some unused variables and labels.
    (e_destination_importv): Check for the xml not parsing correctly
    and just return NULL here.

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_import_destinationv): Handle a NULL destv
    here.

2001-07-15  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-view.c (table_drag_data_get): Added a
    call to e_table_view_to_model_row here.
    (e_addressbook_view_can_print, e_addressbook_view_can_delete,
    e_addressbook_view_can_copy): If the selection model is NULL here,
    return NULL (this was done before in a g_return_val_if_fail which
    is only conditionally included.)

2001-07-13  Christopher James Lahey  <clahey@ximian.com>

    * gui/contact-editor/contact-editor.glade: Changed Company to
    Organization here.

2001-07-12  JP Rosevear  <jpr@ximian.com>

    * backend/pas/Makefile.am: add ldap cflags

2001-07-12  Jeffrey Stedfast  <fejj@ximian.com>

    * backend/ebook/e-destination.c (e_destination_xml_decode):
    Oops. I introduced my own bug, accidently set `email' to a
    g_free'd pointer - eek!

2001-07-12  Jeffrey Stedfast  <fejj@ximian.com>

    * backend/ebook/e-destination.c (e_destination_importv): Optimized
    the same way I optimized g_strsplit. If you use a GPtrArray
    instead of a linked list, you save yourself from having to iterate
    through the list an extra 3 times.
    (e_destination_xml_decode): Do NOT, I repeat: do NOT!
    e_utf8_xml1_decode something which is already in UTF-8 or you'll
    corrupt it!! I smack thee who hath done this evil deed!

2001-07-12  Iain Holmes  <iain@ximian.com>

    * backend/e-book/evolution-vcard-importer.c (support_format_fn):
    Check for no extension. Actually same as Jason's fix below :) but
    also check the file contents.

2001-07-12  JP Rosevear  <jpr@ximian.com>

    * gui/component/addressbook-config.glade: add accelerators,
    taylor's patch

2001-07-12  Jason Leach  <jleach@ximian.com>

    * backend/ebook/evolution-vcard-importer.c (support_format_fn):
    Crash fix because strcmp() hates NULL arguments.  Bug #3777.

2001-07-11  Jason Leach  <jleach@ximian.com>

    * gui/component/select-names/e-select-names.c (remove_cb): Added
    some comments for clarity and fixed a pretty noticable bug with
    how right click "Remove" was deleting more than it should with
    consecutive runs.

2001-07-10  Chris Toshok  <toshok@ximian.com>

    * backend/pas/evolutionperson.schema: assign OID's to the schema
    entries, and add schema support for contact lists.

2001-07-10  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c (pas_backend_file_load_uri): Set
    bf->priv->file_db before calling do_create.

2001-07-06  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook-component.c (factory_fn): Fixed order
    of arguments to evolution_shell_component_new.

2001-07-08  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_insert_length): Check that str isn't
    the empty string before doing an insert.

    * backend/ebook/e-destination.c (e_destination_set_string): We were
    being too smart for our own good here, and causing problems for
    the completion code... (bug #4253, bug #4255, bug #4280)
    (e_destination_set_name): Clear any cached address.
    (e_destination_set_email): Clear any cached address.
    (e_destination_get_address): Handle the cases where the name
    contains some e-mail information.

2001-07-09  Kjartan Maraas  <kmaraas@gnome.org>

    * gui/contact-list-editor/e-contact-list-editor.c: Marked a
    string for translation. Also add the neccesary includes to make
    _() macros work.
    
2001-07-07  Jon Trowbridge  <trow@ximian.com>

    * gui/widgets/e-minicard.c (add_field): Detect the embedded
    EDestination XML, and convert it to a nice-looking e-mail address.

    * gui/contact-list-editor/e-contact-list-editor.c: Adjusted to
    reflect changes to EContactListModel.  (Yeah, this is vague,
    but the changes are _really_ obvious and boring.)

    * gui/contact-list-editor/e-contact-list-model.c: Revamped
    to make everything an EDestination, rather than storing either
    cards or strings.

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_insert_length): Use
    e_destination_get_textrep.

    * gui/component/select-names/e-select-names-table-model.c
    (fill_in_info): Use e_destination_get_name and
    e_destination_get_email.

    * gui/component/select-names/e-select-names-popup.c
    (popup_menu_card): Use e_destination_get_name instead of
    e_card_name_to_string.
    (quick_add_cb): Use e_destination_get_address.
    (popup_menu_nocard): Use e_destination_get_name.

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_changed): Removed obsolete debugging code.
    (e_select_names_model_get_textification): Use e_destination_get_textrep.
    (e_select_names_model_get_address_text): Use e_destination_get_address.
    (e_select_names_model_get_string): Use e_destination_get_textrep.
    (e_select_names_model_replace): Use e_destination_get_textrep.
    (e_select_names_model_name_pos): Use e_destination_get_textrep.

    * gui/component/select-names/e-select-names-completion.c
    (emailify_match): Match only if this isn't a contact list.
    (match_email): Match only if this isn't a contact list.
    (match_name): Do the right thing in the case of a contact list.
    (book_query_process_card_list): Don't construct a match for
    each possible e-mail address if this is a contact list.

    * backend/ebook/e-destination.c: Major-league de-crufting and
    rationalization, combined with lots of hacks to make things work
    properly with contact lists.
    (e_destination_copy): Copy contact list info.
    (e_destination_clear_card): Clear contact list info.
    (e_destination_is_empty): If we contain a contact list, we aren't
    empty.
    (e_destination_set_card_uri): Added.  Allows us to set a
    destination by card URI.
    (e_destination_set_name): Allows the contact's name only ("Jane
    Smith") to be set.
    (e_destination_set_email): Allows the contact's e-mail only
    ("jane@assbarn.com") to be set.
    (e_destination_set_string): Takes a free-form string containing a
    contact's name and/or e-mail, and tries to do the right thing with
    it.
    (e_destination_contains_card): Renamed.  Used to be
    e_destination_has_card.
    (e_destination_from_card): Added.  Returns TRUE if the
    EDestination comes from either a ECard (which we presently hold)
    or is specified by an ECard URI.
    (e_destination_use_card): Allows an EDestination's ECard to be
    accessed, via a callback.  If we only are holding the URI, the
    card will be loaded and stored in the EDestination.
    (e_destination_get_name): Returns the name only ("Jane Smith"), or
    NULL.
    (e_destination_get_email): Returns the email only
    ("jane@assbarn.com"), or NULL.
    (e_destination_get_address): Added.  Returns a "full address" if
    both the name & e-mail are available ("Jane Smith
    <jane@assbarn.com>"), or just the e-mail if the name is unknown
    ("jane@assbarn.com>").  If the destination is a contact list,
    returns a comma-separated list of addresses.
    (e_destination_get_textrep): Added.  Returns a "text
    representation" of the EDestination.  This is what is now
    displayed for completed, "cardified" destinations in addressbook
    entries.
    (e_destination_is_evolution_list): Check to see if this
    destination is for a contact list.
    (e_destination_xml_encode): Added.  Build an XML data structure
    representing an EDestination.
    (e_destination_xml_decode): Added.  Parse an XML data structure,
    constructing an EDestination.
    (e_destination_export): Added.  Returns a null-terminated string
    containing an XML representation of the EDestination, with
    newlines and excess whitespace removed.
    (e_destination_import): Added.  Parses a string containing an XML
    representation of an EDestination.
    (e_destination_exportv): Added.  Returns a null-terminated string
    containing an XML representation of a collection of EDestinations,
    with newlines and excess whitespace removed.
    (e_destination_importv): Added.  Takes an XML representation of a
    collection of destinations, parses it, and returns a vector of
    EDestinations.

    * backend/ebook/e-card.c (e_card_duplicate): Copy the ->book
    pointer.
    (e_card_get_id): Check that the argument is valid.
    (e_card_set_id): Check that the argument is valid.
    (e_card_get_book): Added.  Return the EBook the ECard came from.
    (e_card_get_uri): Added.  Tries to returns a URI for the ECard,
    which is of the form (EBook URI)/(ECard unique ID).  Returns NULL
    if the EBook URI or the ID are unknown/not set.
    (e_card_get_vobject): If we have the URI, use it as the
    VCUniqueStringProp, rather than just the ID.  This is a hack to
    make DnD work properly.
    (parse_id): Detect if the unique ID we've been passed is a URI or
    just a plain card ID, and do the right thing in either case.
    (e_card_uri_extract_book_uri): Added.  Convenience function for
    parsing card URIs.
    (e_card_uri_extract_card_id): Added.  Convenience function for
    parsing card URIs.
    (e_card_load_uri): Added.  Allows an ECard to be loaded by its
    URI.

    * backend/ebook/e-book-view.c: Added a EBook * to the
    _EBookViewPrivate struct.  This is meant to contain the EBook the
    EBookView is associated with.
    (add_book_iterator): Added.  A convenience function for attaching
    the EBook to a GList of cards (if no EBook is already stored).
    (e_book_view_do_added_event): Record the EBook in the added
    ECards.
    (e_book_view_do_modified_event): Record the EBook in the modified
    ECards.
    (e_book_view_set_book): Added.  Stores a pointer to the
    EBookView's "parent" EBook.
    (e_book_view_init): Init book_view->priv->book to NULL.
    (e_book_view_destroy): Unref book_view->priv->book.

    * backend/ebook/e-book.c: Added a uri field to _EBookPrivate.
    (e_book_unqueue_op): Removed debugging spew.
    (e_book_do_response_get_view): Attach the current EBook to the
    created EBookView.
    (e_book_do_response_get_changes): Attach the current EBook to the
    created EBookView.
    (e_book_load_uri): Save a copy of the uri in the EBook.
    (e_book_get_uri): Added.  Just returns book->priv->uri.
    (e_book_get_card): Attach a pointer to the Ebook to the
    newly-loaded ECard.
    (e_book_add_card): Attach a pointer to the EBook to the
    newly-added ECard.
    (e_book_commit_card): Attach a pointer to the EBook to the
    committed ECard.
    (e_book_init): Initialize the uri to NULL.
    (e_book_destroy): Free the uri string on destruction.

2001-07-06  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook-component.c (populate_context_menu):
    Removed.  [It was just bogus testing code for the right-click menu
    populating interface in the shell].
    (factory_fn): Pass NULL as the PopulateContextMenuFn.

2001-07-05  Anna Marie Dirks  <anna@ximian.com>

    * gui/contact-list-editor/contact-list-editor.glade: 
    Added some accelerators, padding, and a "memebers" frame;
    also fixed spacing and growth behaviour of this dialog. 

2001-07-05  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c (compare_category): Fix a memory
    leak here.

2001-07-05  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card-compare.c (match_search_info_free): Set
    info->avoid = NULL.  This shouldn't make a difference, but it
    can't hurt.

2001-07-05  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-table-adapter.c
    (addressbook_is_cell_editable): Check if the row is within our
    table and return from this function as if the card is a standard
    card, not a list.

2001-07-03  Damon Chaplin  <damon@ximian.com>

    * backend/ebook/Makefile.am (evolution_vcard_importer_LDADD): 
    added $(BONOBO_CONF_LIBS) to get it to compile.

2001-07-02  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/Makefile.am (evolution_addressbook_LDADD): Added
    $(BONOBO_CONF_LIBS).

    * gui/component/select-names/e-select-names.c
    (e_select_names_create_categories),
    gui/contact-editor/e-contact-editor.c (categories_clicked):
    Switched to an ECategoriesMasterListWombat instead of an
    ECategoriesMasterListArray here.

2001-07-02  Peter Williams  <peterw@ximian.com>

    * gui/contact-editor/Makefile.am (INCLUDES): srcdir !=
    builddir compile fix.

    * gui/contact-list-editor/Makefile.am (INCLUDES): Same.

    * gui/widgets/Makefile.am (INCLUDES): Same.

    * gui/search/Makefile.am (INCLUDES): Same.

2001-07-02  Christopher James Lahey  <clahey@ximian.com>

    * gui/contact-editor/e-contact-editor.c (categories_clicked):
    Turned off wombatification of the categories master list here.

2001-07-01  Chris Toshok  <toshok@ximian.com>

    * gui/contact-list-editor/e-contact-list-editor.c (fill_in_info):
    use ECARD_UID_LINK_PREFIX.

    * gui/contact-list-editor/e-contact-list-model.c
    (e_contact_list_model_get_email): use ECARD_UID_LINK_PREFIX.

    * backend/ebook/e-destination.h: add prototype for
    e_destination_importv_list.

    * backend/ebook/e-destination.c (e_destination_importv_list): new
    function, take an ECard corresponding to an address list and
    resolve any linked cards, returning an EDestination vector.

    * backend/ebook/e-card.h (ECARD_UID_LINK_PREFIX): #define this here,
    since we need to use it in a few places.

2001-07-02  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added
    related_contacts field.

    * gui/component/select-names/e-select-names-model.c,
    gui/component/select-names/e-select-names-model.h
    (e_select_names_model_import_destinationv): Added this function.

    * gui/contact-editor/contact-editor.glade: Replaced the entry here
    for related contacts with a table which is filled in in the C code.

    * gui/contact-editor/e-contact-editor.c,
    gui/contact-editor/e-contact-editor.h (add_lists): Added a select
    names entry here for the related contacts field.

    * gui/widgets/Makefile.am: Removed all the test programs here
    since there are circular dependencies now.

2001-07-01  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-destination.c (e_destination_get_string): Fall
    back to use the name field if all else fails (which can happen
    with imported EDestinations).

    * backend/ebook/e-destination.c (e_destination_is_empty): Fix for the
    "recipient not specified" bug --- we were not correctly checking
    for whether or not an EDestination was actually empty.

2001-06-30  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-card.c (e_card_evolution_list): Check args.
    Somewhere in the code (somewhere in the minicard stuff) this can
    be called with a NULL arg, which was causing crashes.
    (e_card_evolution_list_show_addresses): Check args.

    * backend/ebook/e-destination.c (build_field): I was accidentally
    comparing characters and strings here, and didn't see the compiler
    warning.  Fixed.
    (e_destination_exportv): Don't export any empty destinations.
    (bug#3825).

2001-06-30  Zbigniew Chyla  <cyba@gnome.pl>

    * gui/component/e-address-popup.c (e_address_popup_construct): Marked
    strings for translation.

2001-06-30  Jon Trowbridge  <trow@ximian.com>

    * gui/merging/e-card-merging.c (match_query_callback): Make the
    standard for considering two cards to be match stricter.

    * gui/component/select-names/e-select-names-completion.c
    (make_match): Use the card's use-score to set the match's
    sort_major value.
    (match_name): Removed obsolete code.
    (e_select_names_completion_begin): Added (double) cast to make
    match->score calculation come out properly.

    * backend/ebook/e-card.c: Added X-EVOLUTION-LAST-USE and
    X-EVOLUTION-USE-SCORE to attribute_jump_array.
    (e_card_get_today): Added.  A convenience routine for getting
    today's date and putting it in a GDate.
    (e_card_get_use_score): Added.  Compute the current, time-decayed,
    use-score for the card.
    (e_card_touch): Increment the use-score by one; update the last
    used date.
    (e_card_date_to_string): Added as a convenience routine, getting
    rid of some code duplication.
    (e_card_get_vobject): Add handlers for X-EVOLUTION-USE-SCORE and
    X-EVOLUTION-LAST-USE.
    (parse_last_use): Added.
    (parse_use_score): Added.
    (e_card_class_init): Added args for last-use and use-score.
    (e_card_get_arg): Added handlers for last-use and use-score.
    o
    (e_card_set_arg): Added handlers for last-use and use-score.

    * backend/ebook/e-destination.c: Added pending_card_id to
    EDestinationPrivate struct.
    (e_destination_copy): Copy the pending_card_id.
    (e_destination_is_empty): Check for a pending_card_id.  We are
    non-empty if we have one.
    (e_destination_clear_card): Clear pending_card_id.
    (e_destination_set_card): Clear pending_card_id.
    (e_destination_has_pending_card): Added.
    (e_destination_use_card): Added.  An asynchronous way to load a
    pending card and then apply a callback to it.
    (build_field): Be paranoid, map our special characters to '_'.
    (e_destination_export): Use EXPORT_MAX_FIELDS symbol rather than a
    hard-wired array size.  Added the "card" entry.
    (e_destination_import): Fix bug in handling of the "name" field.
    Process the "card" field.
    (e_destination_touch): "Touch" and commit the ECard corresponding
    to the e-mail address in the destination.  (A query against the
    local addressbook is actually performed, in case the destination
    isn't cardified.

    * backend/ebook/e-card-compare.c (e_card_compare_name): Revamp the
    way E_CARD_MATCH_FOO results are mapped to comparison results.
    Report better matches when the family name is matched.

2001-06-29  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names.c (update_query):
    Added a search field to the query here.
    (e_select_names_init): Update the query on a number of signals here.

    * gui/component/select-names/e-select-names.h: Added search_entry
    here.

    * gui/component/select-names/select-names.glade: Added the search
    entry here.  Added some labels.  Removed the update button.

2001-06-29  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names.c
    (e_select_names_option_activated): Change the uri here to have
    addressbook.db at the end.

    * gui/component/select-names/select-names.glade: Changed the name
    of the folder option menu here to match the name used in the code.

2001-06-29  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names.c (update_query):
    Change the query when the "Update List" button is pushed.

    * gui/component/select-names/e-select-names.h: Removed
    currently_selected field.  Added categories_entry field.

    * gui/component/select-names/select-names.glade: Added "Update
    List" button.

2001-06-29  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/Makefile.am (INCLUDES): add EVOLUTION_IMAGESDIR
    define.

    * gui/widgets/e-minicard.h (struct _EMinicard): add our pixbuf and
    pixbuf size.

    * gui/widgets/e-minicard.c (e_minicard_init): init the icon pixbuf
    and its size.
    (e_minicard_destroy): unref the list_icon_pixbuf.
    (e_minicard_realize): create the list_icon GnomeCanvasPixbuf.
    (e_minicard_resize_children): clip the header_text by the
    list_icon, and place the list_icon in the right spot.
    (remodel): show the list_icon if we're a list, and hide it
    otherwise.

2001-06-28  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-addressbook-view.c (table_double_click): pop up
    list editor for lists, contact editor otherwise.

    * gui/widgets/e-minicard.c (e_minicard_event): same.

    * gui/widgets/e-minicard.h (struct _EMinicard): change "editor" to
    GtkOjbect, since it can be either a contact editor or contact list
    editor.

    * gui/widgets/e-addressbook-table-adapter.c
    (addressbook_is_cell_editable): don't allow editting of any fields
    except the name and file_as for lists.

2001-06-28  Chris Toshok  <toshok@ximian.com>

    * gui/contact-list-editor/Makefile.am (INCLUDES): remove ancient
    e-table include, and add include for contact-editor so we can
    reuse the confirm_delete dialog.

    * gui/contact-list-editor/e-contact-list-editor.h (struct
    _EContactListEditor): remove prototype for
    e_contact_list_editor_close, since the function no longer exists.

    * gui/contact-list-editor/e-contact-list-editor.c
    (list_deleted_cb): new function, emit our "list_deleted" signal.
    (delete_cb): new function, called from the Delete toolbar item.
    (e_contact_list_editor_raise): flesh out function.
    (extract_info): "evolution_list" => "list".
    (fill_in_info): same.

2001-06-28  Chris Toshok  <toshok@ximian.com>

    * backend/ebook/e-card.c (e_card_get_vobject): add support for
    X-EVOLUTION-LIST and X-EVOLUTION-LIST-SHOW-ADDRESSES.
    (parse_list): new function, parse the boolean X-EVOLUTION-LIST.
    (parse_list_show_addresses): new function, parse the boolean
    X-EVOLUTION-LIST-SHOW-ADDRESSES.
    (e_card_class_init): add args for "list" and
    "list_show_addresses".
    (e_card_set_arg): add support for list and list_show_addresses.
    (e_card_get_arg): same.
    (e_card_init): init list and list_show_addresses.

2001-06-27  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook-component.c (factory_fn): Pass NULL as
    the @external_uri_schemas argument to
    `evolution_shell_component_new()'.

2001-06-27  Chris Toshok  <toshok@ximian.com>

    * gui/contact-list-editor/e-contact-list-model.c
    (contact_list_row_count): track storage change - we're only using
    1 array now.
    (contact_list_value_at): same.
    (contact_list_model_destroy): same.
    (e_contact_list_model_init): same.
    (e_contact_list_model_add_email): same.
    (e_contact_list_model_add_card): same.
    (e_contact_list_model_remove_row): same.
    (e_contact_list_model_remove_all): new function - just free/unref
    all existing rows.
    (e_contact_list_model_get_email): new function, returns the
    alloc'ed string containing either an email address or an encoded
    ECardId.

    * gui/contact-list-editor/e-contact-list-model.h: remove the 2
    separate arrays for email and cards, and store them in the same
    array.

    * gui/contact-list-editor/e-contact-list-editor.h (struct
    _EContactListEditor): add the visible_addr_checkbutton widget.

    * gui/contact-list-editor/e-contact-list-editor.c
    (visible_addrs_toggled_cb): new function.
    (e_contact_list_editor_init): connect to "toggled" on
    visible_addrs_checkbutton.
    (file_save_cb): new function.
    (tb_save_and_close_cb): new function.
    (verbs): add Save and Save & Close.
    (list_added_cb): new function.
    (list_modified_cb): new function.
    (save_card): new function - we do *not* use e_card_merging_* calls
    here.
    (e_contact_list_editor_get_arg): un-#if 0 code in the "card"
    getter.
    (e_contact_list_editor_set_arg): same for the "card" setter.
    (extract_info): new function.
    (fill_in_info): new function.

    * gui/contact-list-editor/contact-list-editor.glade: add a
    checkbutton at the bottom to determine whether to visibly include
    mail addresses in mail sent to this list.

2001-06-26  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names.c
    (e_select_names_create_categories): Oops.  Can't use the wombat
    version of the master categories list yet.

2001-06-26  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-table-adapter.c (create_card): memmove
    counts were off in this function.
    (remove_card, modify_card): Moved the table notifications around a
    bit here.

2001-06-26  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names.c,
    gui/component/select-names/e-select-names.h,
    gui/component/select-names/select-names.glade
    (e_select_names_create_categories): Added a categories combo here.
    It's not used yet.

2001-06-26  Christopher James Lahey  <clahey@ximian.com>

    * gui/search/addresstypes.xml: Added category searching to the
    advanced search dialog here.
    
2001-06-26  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c (compare_category): Added
    category searching to the file backend.

    * gui/component/addressbook.c (addressbook_query_changed): Added
    category searching to the search bar.

2001-06-25  Peter Williams  <peterw@ximian.com>

    * conduit/Makefile.am (INCLUDES): Fix for srcdir != builddir.

2001-06-25  Chris Toshok  <toshok@ximian.com>

    * gui/contact-list-editor/contact-list-editor.glade: change layout
    slightly, the icon no longer pushes everything to the left, and
    make the buttons on the right smaller and more in line with the
    other widgets.

    * gui/contact-list-editor/e-contact-list-model.c
    (contact_list_value_at): return the SimpleAndString->string
    instead of querying the ecardsimple.
    (e_contact_list_model_init): initially allocate 10 of each type
    (email and simple).
    (e_contact_list_model_add_email): realloc if need be.
    (e_contact_list_model_add_card): same, and initialize the string
    displayed to be "[Name] [<email>]".
    (e_contact_list_model_remove_row): change for SimpleAndString.
    (contact_list_model_destroy): free our 2 arrays.

    * gui/contact-list-editor/e-contact-list-model.h: add alloc counts
    and the SimpleAndString struct.

    * gui/contact-list-editor/e-contact-list-editor.c: Helix Code =>
    Ximian.
    (e_contact_list_editor_init): hook up d&d destination signals, and
    un-#if 0 the delete_event signal.
    (table_drag_motion_cb): new function.
    (table_drag_drop_cb): new function.
    (table_drag_data_received_cb): new function.
    (file_close_cb): new function.
    (verbs) uncomment the close verb.
    (close_dialog): new function.
    (app_delete_event_cb): new function.

    * gui/contact-list-editor/e-contact-list-editor.h: Helix Code =>
    Ximian.

2001-06-25  Jon Trowbridge  <trow@ximian.com>

    * gui/component/e-address-popup.c: Add a huge steaming pile of
    code to handle the case of single-address merging.  In other
    words, if you go to "harvest" an address by right-clicking on it
    in the mail viewer, and you already have a closely-matching
    contact (w/ a different e-mail address), this gives you the
    option of editting that contact's e-mail addresses to add the
    one you just clicked on.

    * backend/ebook/e-card-compare.c (match_search_info_free): It is
    amazing how much better things work when you don't try to
    dereference the pointer you just freed.

2001-06-24  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/Makefile.am (minicard_test_LDADD): correct path to
    libecontacteditor.a.
    (minicard_widget_test_LDADD): same.
    (INCLUDES): same, for the includes.

    * gui/widgets/e-minicard.h: correct e-contact-editor.h path.

    * gui/widgets/e-addressbook-util.h: correct path to
    e-contact-editor.h, and add e-contact-list-editor.h.  Add
    prototype for e_addressbook_show_contact_list_editor.

    * gui/widgets/e-addressbook-util.c: remove #include
    "e-contact-editor.h" (our header includes it.)
    (added_cb): rename card_added_cb to this, and make it so it can be
    reused in both the list and card cases.  remove the g_print too.
    (modified_cb): same for modified case.
    (deleted_cb): same for deleted case.
    (editor_closed_cb): change first arg to GtkObject* so we can reuse
    this for both list and card.
    (e_addressbook_show_contact_editor): use added_cb, modified_cb,
    deleted_cb, and pass FALSE as user_data.
    (e_addressbook_show_contact_list_editor): new function, same as
    above but creating a contact-list-editor, and pass TRUE as
    user_data.

    * gui/component/e-address-popup.c: correct path to contact-editor.

    * gui/component/e-address-widget.c: same.
    
    * gui/component/select-names/e-select-names-popup.c: same.

    * gui/component/select-names/e-select-names-text-model.c: same.

    * gui/component/addressbook.c (new_contact_list_cb): new function.
    (update_command_state): update ContactNewList command.
    (verbs): remove ViewAll from the toolbar from the verb list.  Add
    ContactNewList.
    (pixmaps): same for pixmaps.
    
    * gui/component/Makefile.am (evolution_addressbook_LDADD): new
    path for contact-editor.
    (INCLUDES): same.

    * gui/contact-list-editor/e-contact-list-model.h:
    * gui/contact-list-editor/e-contact-list-model.c:
    * gui/contact-list-editor/e-contact-list-editor.h:
    * gui/contact-list-editor/e-contact-list-editor.c:
    * gui/contact-list-editor/Makefile.am: Initial contact-list editor
      commit.

    * gui/Makefile.am (SUBDIRS): add contact-editor.

    * Makefile.am: (SUBDIRS): remove contact-editor.

2001-06-21  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-popup.c
    (make_contact_editor_cb): Renamed.  (The old name,
    edit_contact_info_have_book_cb was a hold-over from before, when
    we weren't using e_book_use_local_address_book.)

    * gui/component/e-address-popup.c
    (e_address_popup_schedule_refresh): A Added.  We now do the name
    refreshes in an idle function, rather than in the setters.
    (e_address_popup_set_free_form): Added.  Properly handle inputs of
    the form "Foo <bar@zar.com>", extracting the name and e-mail
    address.
    (e_address_popup_set_name): Check to make sure that the free-form
    handler shouldn't be used to handle the input.  Schedule a refresh
    after making any changes.
    (e_address_popup_set_email): Check to make sure that the free-form
    handler shouldn't be used to handle the input.  Schedule a refresh
    after making any changes.
    (e_address_popup_name_only_matches): Temporary place-holder for
    handling name-only matches.
    (query_cb): If our initial query fails (and included e-mail
    information), do a name-only query.  This is to handle the case of
    adding new e-mail addresses to existing contacts.
    (e_address_popup_query): Eliminated the "common_book" crap; using
    e_book_use_local_address_book instead.

    * backend/ebook/e-card-compare.c (match_search_info_free): Make
    sure that the ->avoid list gets properly freed.

2001-06-20  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-file.c
    (pas_backend_file_process_get_supported_fields): fix a refcounting
    memleak.

2001-06-20  Chris Toshok  <toshok@ximian.com>

    * backend/ebook/e-book-listener.c
    (e_book_listener_queue_get_supported_fields_response): fix memory
    leak.

2001-06-20  Chris Toshok  <toshok@ximian.com>

    * contact-editor/e-contact-editor.c: add prototype for
    close_dialog to remove warnings.

2001-06-20  Dave Camp  <dave@ximian.com>

    * backend/ebook/e-card.c (e_card_list_send): Changed attach_data
    to be a GNOME_Evolution_Composer_AttachmentData rather than a
    CORBA_char*.

2001-06-19  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-addressbook-view.c (table_double_click): track
    change to e_addressbook_show_contact_editor signature.

    * gui/widgets/e-minicard-view.c (e_minicard_view_event): same.

    * gui/widgets/e-minicard.c (e_minicard_event): same.

    * gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
    add an entry for "Card ID already exists".
    (e_addressbook_show_contact_editor): track the change to signal
    names and e_contact_editor_new signature here.

    * gui/widgets/e-addressbook-util.h: change
    e_addressbook_show_contact_editor's signature to match
    e_contact_editor_new more closely.

    * gui/widgets/e-addressbook-table-adapter.c (unlink_model): free
    up the simple mapping to plug a potentially sizeable memory leak.

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_activate_obj): call
    e_addressbook_show_contact_editor here.

    * gui/component/select-names/e-select-names-popup.c
    (edit_contact_info_have_book_cb): remove the get_supported_fields
    stuff, since the contact editor handles it for us now, and call
    e_addressbook_show_contact_editor.

    * gui/component/e-address-popup.c (edit_contact_info_cb): same.

    * gui/component/addressbook.c (new_contact_cb): track change to
    e_addressbook_show_contact_editor.

2001-06-19  Chris Toshok  <toshok@ximian.com>

    * contact-editor/e-contact-quick-add.c (ce_have_book): rename
    ce_book_found_fields to this, remove the fetching of fields (the
    contact editor code handles that now.), and change the add_card
    signal to card_added.
    (card_added_cb): copied somewhat from merge_cb above.  we don't
    need to do the merge here, just call the callback.

    * contact-editor/e-contact-editor.c (e_contact_editor_class_init):
    track signal change.  add book arg, and is_read_only -> editable.
    (wants_html_changed): if the card isn't already changed, flag it
    as such (and update the commands.)
    (phone_entry_changed): same.
    (email_entry_changed): same.
    (address_text_changed): same.
    (name_entry_changed): same.
    (company_entry_changed): same.
    (full_name_clicked): is_read_only -> editable.
    (full_addr_clicked): same.
    (card_added_cb): new function, emit our card_added signal, and
    close the dialog if we're supposed to.  properly deal with error
    status here.
    (card_modified_cb): same, modulo card_added -> card_modified.
    (save_card): actually call e_card_merging_book_{add/commit}_card
    instead of using a signal.  Also, add a gboolean arg to tell
    whether or not to close the dialog after saving the card.
    (card_deleted_cb): new function, just emit our "card_deleted"
    signal.
    (delete_cb): actually call e_book_remove_card here, instead of
    using a signal.
    (tb_save_and_close_cb): call save_card with TRUE for should_close.
    (e_contact_editor_init): init changed = FALSE;
    (e_contact_editor_destroy): unref our book if we have one.
    (e_contact_editor_new): new signature, set the "book" arg, and
    call e_book_get_supported_fields here.
    (supported_fields_cb): new function, show the contact editor.
    (e_contact_editor_set_arg): initialize changed to FALSE when
    setting the card (but *after*, since the changed callbacks will
    set it to TRUE.)  also, call command_state_changed if editable
    changes.  also handle setting "book".  oh, and is_read_only ->
    editable.
    (command_state_changed): new function - set the state of the
    commands we care about.
    (e_contact_editor_get_arg): add "book" handling, and is_read_only
    -> editable.
    (_phone_arrow_pressed): is_read_only -> editable.
    (_email_arrow_pressed): same.
    (_address_arrow_pressed): same.
    (enable_writable_fields): same.
    (set_editable): rename set_read_only to this, and is_read_only ->
    editable.

    * contact-editor/e-contact-editor.h (struct _EContactEditor):
    is_read_only -> editable, add a "changed" flag so we can sensitize
    commands correctly, and add an EBook* arg to e_contact_editor_new
    and to the EContactEditor struct.  Also, change all the signals to
    past tense, and send the EBookStatus in them.

    * contact-editor/e-contact-editor-address.c
    (e_contact_editor_address_class_init): is_read_only -> editable.
    (e_contact_editor_address_set_arg): same.
    (e_contact_editor_address_get_arg): same.

    * contact-editor/e-contact-editor-address.h (struct
    _EContactEditorAddress): same.

    * contact-editor/e-contact-editor-fullname.c
    (e_contact_editor_fullname_class_init): same.
    (e_contact_editor_fullname_set_arg): same.
    (e_contact_editor_fullname_get_arg): same.

    * contact-editor/e-contact-editor-fullname.h (struct
    _EContactEditorFullname): same.

    * contact-editor/Makefile.am: don't build contact-editor-test now,
    until contact-editor gets moved to gui/ and we can more easily
    depend on the e_card_merging_* calls.

    * backend/pas/pas-backend-ldap.c (ldap_error_to_response): return
    CardIdAlreadyExists for LDAP_ALREADY_EXISTS.

    * backend/idl/addressbook.idl: Add CardIdAlreadyExists to the
    BookListener status enum.

    * backend/ebook/e-book-types.h: add
    E_BOOK_STATUS_CARD_ID_ALREADY_EXISTS.

    * backend/ebook/e-book-listener.c
    (e_book_listener_convert_status): add support for
    CardIdAlreadyExists.

2001-06-19  Jon Trowbridge  <trow@ximian.com>

    * contact-editor/e-contact-quick-add.c: Serious de-crufting,
    removal of gtk_object_set_data() hacks, simplified by using
    some of the newer ebook convenience routines, etc.
    (ce_book_found_fields):
    s/e_contact_editor_raise/e_contact_editor_show/, to accomodate the
    small changes in the contact editor API.

2001-06-18  Eskil Heyn Olsen  <eskil@eskil.dk>

    * conduit/address-conduit.c: (check_for_slow_setting),
    (conduit_get_gpilot_conduit):
    Tweaked for some gnome-pilot api changes

2001-06-15  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (search_for_dn): implement this
    properly, using base and (objectclass=*).

2001-06-14  Chris Toshok  <toshok@ximian.com>

    * contact-editor/e-contact-editor.c (delete_cb): save ourselves a
    function call - call close_dialog instead of file_close_cb.

2001-06-14  Jeffrey Stedfast  <fejj@ximian.com>

    * gui/component/addressbook-component.c: Set the
    "expoted_dnd_types" to NULL in the folder_types.

2001-06-11  Dan Winship  <danw@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (search_override_check): Add a workaround for an EText bug.
    (e_select_names_completion_begin): Fix up the match scoring in the
    search_override case so the lines are offered in the correct
    order.

2001-06-11  Christopher James Lahey  <clahey@ximian.com>

    * gui/merging/Makefile.am (glade_DATA): Added
    e-card-merging-book-commit-duplicate-detected.glade here.

    * gui/merging/e-card-merging-book-commit-duplicate-detected.glade:
    Added this file.  The GUI for asking whether to commit a modified
    card.

    * gui/merging/e-card-merging.c, gui/merging/e-card-merging.h
    (e_card_merging_book_commit_card): Added this function.

    * gui/widgets/e-addressbook-table-adapter.c
    (addressbook_set_value_at), gui/widgets/e-addressbook-util.c
    (commit_card_cb), gui/widgets/e-minicard.c (e_minicard_event): Use
    e_card_merging_book_commit_card instead of e_book_commit_card here.

2001-06-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
    Made e_card_simple_get_id return const char *.

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Made
    e_card_get_id return const char *.

    * gui/component/e-cardlist-model.c (e_cardlist_model_add): Made id
    variable const here.  Added a break to make it slightly more
    efficient.

    * gui/widgets/e-minicard.c, gui/widgets/e-minicard.h: Made
    e_minicard_get_card_id return const char *.

2001-06-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c (entry_compare): Made this handle
    the "id" property in searches.
    (pas_backend_file_process_modify_card): Made id variable const
    here.

    * backend/pas/pas-backend-ldap.c (modify_card_handler): Made id
    variable const here.

2001-06-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book-listener.c,
    backend/ebook/e-book-listener.h, backend/ebook/e-book.c: Rolled
    back the change 2 ago, dated 06/11/2001 01:51 in CVS, involving
    e-book-listener.[ch] and e-book.c.

2001-06-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book.c (e_book_load_uri,
    e_book_get_supported_fields, e_book_authenticate_user,
    e_book_remove_card_by_id, e_book_add_vcard, e_book_commit_vcard,
    e_book_get_cursor, e_book_get_book_view, e_book_get_changes): Made
    it so that all of these functions queue their ops before calling
    their CORBA functions.  This way, if the response is sent back
    before the CORBA function returns there's no problem.  Added
    e_book_unqueue_op so that the op could be unqueued if the CORBA
    call fails.

2001-06-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book-listener.c, backend/ebook/e-book-listener.h
    (e_book_listener_unpop_response): Added this function to put a
    response back into the queue.

    * backend/ebook/e-book.c (e_book_check_listener_queue,
    e_book_queue_op): Handle the case where the op hasn't been queued
    yet when we get the response.  In this case we unpop the response.
    Also, when queueing an op, we check to see if there are any
    responses waiting.

    * This change has been reverted.

2001-06-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card-compare.c, backend/ebook/e-card-compare.h
    (e_card_locate_match_full): Added this function to let you do
    slightly more complicated searches.

    * gui/merging/e-card-merging.c (e_card_merging_book_add_card): Use
    e_card_locate_match_full to check if the card exists in the book
    it's being added to instead of in the default book.

2001-06-09  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (match_name): Removed unused email variable.

2001-06-09  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card-compare.c (use_common_book_cb): Null
    terminate the strv here.
    (e_card_locate_match): ref here instead of unref.

    * backend/ebook/e-card-simple.c (e_card_simple_get): Handle a NULL
    card here.

    * contact-editor/Makefile.am (INCLUDES), gui/widgets/Makefile.am
    (INCLUDES): Added addressbook/gui/merging here.

    * contact-editor/e-contact-quick-add.c (book_ready_cb),
    gui/component/addressbook-component.c (dnd_drop_book_open_cb),
    gui/widgets/e-addressbook-table-adapter.c
    (addressbook_append_row), gui/widgets/e-addressbook-util.c
    (add_card_cb), gui/widgets/e-addressbook-view.c
    (selection_received), gui/widgets/e-minicard-control.c
    (book_open_cb): Use e_card_merging_book_add_card instead of
    e_book_add_card here.

    * gui/Makefile.am (SUBDIRS): Added merging.

    * gui/component/Makefile.am (evolution_addressbook_LDADD),
    gui/widgets/Makefile.am (minicard_test_LDADD,
    minicard_widget_test_LDADD): Added libecardmerging.a here.

    * gui/merging/, gui/merging/.cvsignore, gui/merging/Makefile.am:
    New addressbook library.

    * gui/merging/e-card-duplicate-detected.glade: Glade file for
    duplicate detected dialog.

    * gui/merging/e-card-merging.c, gui/merging/e-card-merging.h: New
    files for detecting duplicates before adding and putting up a
    dialog if duplicates are found.

    * gui/widgets/e-minicard-view.c: Include e-addressbook-util.h
    here.

2001-06-08  Chris Toshok  <toshok@ximian.com>

    * contact-editor/e-contact-editor.c (e_contact_editor_new): remove
    the gtk_widget_show call...
    (e_contact_editor_show): and put it here.

    * contact-editor/e-contact-editor.h: add prototype for
    e_contact_editor_show.

    * gui/widgets/e-minicard.c (e_minicard_event): call
    e_addressbook_show_contact_editor.
    (card_modified_cb): call e_addressbook_error_dialog if status !=
    SUCCESS.

    * gui/widgets/e-minicard-view.c (e_minicard_view_event): call
    e_addressbook_show_contact_editor.  also, use card_modified_cb as
    the commit_card callback.

    * gui/widgets/e-addressbook-view.c (table_double_click): clean
    this area up alot, call e_addressbook_show_contact_editor.
    (card_deleted_cb): call e_addressbook_error_dialog.

    * gui/widgets/e-addressbook-table-adapter.c
    (card_modified_cb): new function, call e_addressbook_error_dialog
    if the status != SUCCESS.
    (addressbook_set_value_at): use card_modified_cb as the callback
    for e_book_commit_card.

    * gui/widgets/Makefile.am (libeminicard_a_SOURCES): add
    e-addressbook-util.[ch].

    * gui/component/addressbook.c (new_contact_cb): use
    e_addressbook_show_contact_editor here.

2001-06-05  Christopher James Lahey  <clahey@ximian.com>

    * contact-editor/e-contact-editor.c (categories_clicked): Remove
    references to ECategoryMasterListWombat.

2001-06-05  Jason Leach  <jleach@ximian.com>

    * gui/component/select-names/e-select-names.c (remove_cb): Make
    this work when multiple names are selected then right
    click->Remove.

2001-06-05  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card.c (e_card_set_arg): Copy dates as they come
    in.

    * backend/pas/pas-backend-file.c
    (pas_backend_file_changes_foreach_key, pas_backend_file_changes,
    pas_backend_file_process_remove_card,
    pas_backend_file_process_modify_card,
    pas_backend_file_build_all_cards_list, pas_backend_file_get_vcard,
    pas_backend_file_maybe_upgrade_db): memset DBTs to 0 before using
    them.
    (pas_backend_file_build_all_cards_list): Reindented.

    * contact-editor/contact-editor.glade: Replaced GnomeDateEdits
    with a custom widget that creates an EDateEdit.

    * contact-editor/e-contact-editor.c: Use an EDateEdit here instead
    of a GnomeDateEdit.

2001-06-05  Jason Leach  <jleach@ximian.com>

    (Fix bug #655: SelectNames doesn't let you remove addresses after
     you add them)
    
    * gui/component/select-names/e-select-names.c
    (section_right_click_cb): New function, provides a popup menu with
    just "Remove" in it.
    (remove_cb): New callback to do the remove.
    (e_select_names_add_section): Attach the "right_click" signal to
    the section_right_click_cb above.

2001-06-05  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-manager.c
    (completion_handler): Change the completion handler to use the
    ECompletionMatch.

    * gui/component/select-names/e-select-names-completion.c
    General changes to convert for ECompletionMatch use.
    (emailify_match): Use extra sort keys in ECompletionMatch to let
    us ensure that the primary email address is always the first
    option, the secondary comes second, etc.  There was no nice way to
    do this previously.
    (match_name): Removed code that adjusted score based on
    similarities between the "real name" and the e-mail address.  It
    seemed like a good idea at the time, but produced unexpected and
    confusing results.

2001-06-04  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-card-compare.c: Added.  Code for testing
    if two ECards appear to pertain to the same contact (using loose
    matching rules, as opposed to requiring exact equality) and to
    query the addressbook for the "best match" to ECard.

2001-06-03  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c (set_status_message): remove spew,
    and don't call the ShellView CORBA method if the interface doesn't
    exist (for whatever reason.)

    * gui/widgets/e-addressbook-view.c (e_addressbook_view_destroy):
    unref the EAddressbookModel.
    (create_minicard_view): unref the adapter.
    (card_added_cb): call e_book_error_dialog if status != SUCCESS.
    (card_modified_cb): same.
    (card_removed_cb): new function, and same.
    (delete_card_cb): pass card_removed_cb as the callback.
    (emit_status_message): new function, just emit status_message.
    (status_message): change to call emit_status_message.
    (card_deleted_cb): emit_status_message ("Done."), and call
    e_book_error_dialog if status != SUCCESS.
    (do_remove): pass view in the closure arg.
    (e_addressbook_view_delete_selection): emit status "Removing
    cards..." before starting the removal.
    (e_book_error_dialog): new function - pop up a (possibly) helpful
    message about why an operation failed.

    * gui/widgets/e-minicard-view-widget.c
    (e_minicard_view_widget_new): ref the EAddressbookReflowAdapter.
    (e_minicard_view_widget_destroy): unref the adapter.
    (e_minicard_view_widget_get_selection_model): if there isn't a
    minicard view return NULL.

    * gui/widgets/e-addressbook-table-adapter.c
    (e_addressbook_table_adapter_construct): ref the
    EAddressbookModel.

    * gui/widgets/e-addressbook-reflow-adapter.c
    (addressbook_finalize): rename this from addressbook_destroy, to
    reflect the method change.
    (e_addressbook_reflow_adapter_class_init): same.
    (e_addressbook_reflow_adapter_construct): ref the
    EAddressbookModel.

    * gui/widgets/e-addressbook-model.h: add editable_set flag.

    * gui/widgets/e-addressbook-model.c (writable_status): only record
    the writable state of the addressbook if the user hasn't set it.
    (e_addressbook_model_init): init editable_set to FALSE.
    (e_addressbook_model_set_arg): set editable_set to TRUE.

2001-06-03  Ettore Perazzoli  <ettore@ximian.com>

    * backend/ebook/Makefile.am (evolution_vcard_importer_LDADD): Move
    `$(DB3_LDADD)' before libeutil.

2001-06-01  Ettore Perazzoli  <ettore@ximian.com>

    * backend/ebook/Makefile.am (evolution_vcard_importer_LDADD): Add
    $(DB3_LDADD)'.

2001-05-31  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/Makefile.am (INCLUDES): Added db3 cflags.

    * backend/pas/pas-backend-file.c: Updated this to use db3.

2001-05-31  Federico Mena Quintero  <federico@ximian.com>

    * gui/widgets/e-addressbook-view.h (EAddressbookView): Added
    fields for the GalViewMenus and GalViewCollection; we need to keep
    them around while the component is active.

    * gui/widgets/e-addressbook-view.c
    (e_addressbook_view_setup_menus): Plug leak; unref the spec.
    Unref the factories.  Do not unref the collection, since we need
    it for the signal emission (okay, so the views object adds a
    reference to it, but if we are interested in it we should keep a
    reference anyways).
    (e_addressbook_view_setup_menus): Create the collection and views
    on the EAddressbookView's fields so that we can keep them around.
    (e_addressbook_view_discard_menus): New function; gets rid of the
    collection and views objects.

    * gui/component/addressbook.c (control_activate_cb): Call
    e_addressbook_view_discard_menus().

2001-05-31  Chris Toshok  <toshok@ximian.com>

    * gui/component/select-names/e-select-names.h (struct
    _ESelectNames): add the EAddressbookModel* and change the
    ETableModel's name to "adapter".

    * gui/component/select-names/e-select-names.c (set_book),
    (addressbook_model_set_uri): these two things take an
    EAddressbookModel* instead of an ETableModel now.
    (e_addressbook_create_ebook_table): don't case the
    EAddressbookModel* to ETableModel*, create an EAddressbookTableAdapter
    on the EAddressbookModel instead.
    (e_select_names_init): set e_select_names->adapter.

2001-05-31  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-addressbook-model.c (remove_card): decrement
    data_count before emitting the card_removed signal, and break
    after we've removed the matching card.
    (e_addressbook_model_class_init): change signature of
    "card_removed" signal to match what we emit (and what is
    expected.)

    * gui/widgets/e-addressbook-view.c (e_addressbook_view_init): the
    signal name is "destroy", not "destroyed".
    (do_remove): new function, actually remove the card.
    (e_addressbook_view_delete_selection): get this working for both
    view types.

2001-05-31  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c: Print Preview =>
    ContactsPrintPreview.  Changed peter's change so that the node
    name is more in line with "Print.."'s

2001-05-30  Peter Williams  <peterw@ximian.com>

    * gui/component/addressbook.c: Use the correct path to the print
    preview menu item.

2001-05-30  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c (cut_contacts_cb): new function, for
    the Cut verb.
    (copy_contacts_cb): new function, for the Copy verb.
    (paste_contacts_cb): new function, for the Paste verb.
    (select_all_contacts_cb): new function, for the Select All verb.
    (update_command_state): add handling for sensitivity of
    Cut/Copy/Paste/Select All.

    * gui/widgets/e-addressbook-view.c (e_addressbook_view_init): init
    the invisible and set up selection/destroy signals.
    (get_selection_model): new function, so we can get the
    ETableSelectionModel from either view type.  makes lots of the
    other functions easier, since we can get the list of selected
    cards using the same code regardless of view type.
    (invisible_destroyed): new function.
    (selection_get): new function.  convert the clipboard list to
    string.
    (selection_clear_event): new function - free up the list of
    ECards.
    (selection_received): if the selection data is valid and
    well-formed, add the corresponding cards to the ebook.
    (add_to_list): new function.
    (get_selected_cards): new function.
    (e_addressbook_view_cut): new function, implement in terms of
    _copy and _delete_selection.
    (e_addressbook_view_copy): claim ownership of the CLIPBOARD
    selection after saving the list of selected ECards.
    (e_addressbook_view_paste): call gtk_selection_convert.
    (e_addressbook_view_select_all): new function, using
    e_selection_model_select_all.
    (e_addressbook_view_can_print): re-implement in terms of
    get_selection_model.
    (e_addressbook_view_can_delete): same.
    (e_addressbook_view_can_cut): new function.
    (e_addressbook_view_can_copy): new function.
    (e_addressbook_view_can_paste): new function.  hmm, always return
    TRUE here.
    (e_addressbook_view_can_select_all): new function.

    * gui/widgets/e-addressbook-view.h (struct _EAddressbookView): add
    selection stuff - the list of selected cards, and the GtkInvisible
    selection owner, and add prototypes for
    e_addressbook_view_[can]_{cut,copy,paste,select_all}.
    
    * gui/widgets/e-minicard-view-widget.h: add a prototype for
    e_minicard_view_widget_get_selection_model.

    * gui/widgets/e-minicard-view-widget.c
    (e_minicard_view_widget_get_selection_model): new function.

2001-05-27  Dan Winship  <danw@ximian.com>

    * gui/component/addressbook.c: #include
    "evolution-shell-component-utils.h" rather than "e-gui-utils.h"
    for e_pixmaps_update.

2001-05-25  Peter Williams  <peterw@ximian.com>

    * gui/component/Makefile.am: Reference libeshell.la instead of
    libeshell.a.

2001-05-25  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-reflow-adapter.c (addressbook_height):
    Correct the height calculation here to not include the
    E_CARD_SIMPLE_FIELD_FAMILY_NAME since it won't be displayed.

    * gui/widgets/e-minicard.c (remodel): Changed this to continue to
    be more consistent and simpler.

2001-05-23  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (view_destroy): fix strings such
    that ones that happening at the beginning or during an operation
    are followed by "..." and those that stop the operation are
    followed by "."
    (create_card_handler): same.
    (ldap_op_process_current): same, and also call _notify_complete if
    we can't connect to ldap server.
    (poll_ldap): same, and change "Polling for LDAP search result" to
    "Receiving LDAP search results"

    * backend/pas/pas-backend-file.c (pas_backend_file_search): call
    notify_status_message at the beginning of this function, and
    whenever we call _notify_complete.

2001-05-23  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-addressbook-model.h: add sequence_complete_id to
    EAddressbookModel and stop_state_changed to
    EAddressbookModelClass.  also, add prototype for
    e_addressbook_model_can_stop.

    * gui/widgets/e-addressbook-model.c (remove_book_view): disconnect
    from "sequence_complete", and set search_in_progress to FALSE.
    (sequence_complete): set search_in_progress to FALSE and emit
    "stop_state_changed."
    (e_addressbook_model_class_init): create the "stop_state_changed"
    signal.
    (e_addressbook_model_init): init stuff.
    (book_view_loaded): connect to "sequence_complete" signal.
    (book_view_loaded): set search_in_progress to TRUE and emit
    "stop_state_changed"
    (e_addressbook_model_stop): set search_in_progress to false, emit
    "stop_state_changed", and set our status to "Search Interrupted."
    (e_addressbook_model_can_stop): return search_in_progress.

    * gui/widgets/e-addressbook-view.c (e_addressbook_view_init):
    connect to the stop_state_changed signal on EAddressbookModel.
    (stop_state_changed): new function.
    (e_addressbook_view_can_stop): call e_addressbook_model_can_stop.

    * gui/component/addressbook.c (update_command_state): use
    e_addressbook_view_can_stop to set the sensitivity of the stop
    button.

2001-05-22  Dan Winship  <danw@ximian.com>

    * backend/ebook/e-book-listener.c (e_book_listener_check_queue):
    ref the listener for the duration of this function, since emitting
    "responses_queued" may cause it to be unreffed by its EBook in
    some cases, which could cause the second response_queue check to
    look at garbage data if it got destroyed.
    (e_book_listener_destroy): Call g_source_remove if idle_id is set.

2001-05-22  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c: track the change in
    evolution-addressbook.xml's bonobo ui path's.

2001-05-21  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c (change_view_type): update_view_type
    is gone, since the menu item is gone.

    * gui/widgets/e-addressbook-table-adapter.c (create_card): use
    e_table_model_rows_inserted here.

2001-05-20  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook-config.c
    (addressbook_source_item_new): Removed an unused variable.

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_get_property_fn): Made text here non-const.

    * gui/component/select-names/e-select-names-popup.c
    (edit_contact_info_cb): Cast to a gpointer here.

    * gui/component/select-names/e-select-names.c
    (e_addressbook_create_ebook_table): Cast to E_TABLE_MODEL here.

2001-05-18  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (match_name): Do a better job constructing match strings, so we
    never try to use a segment of the name that isn't there (resulting
    in ugly (null)'s in the string).  Boost our score if some part of
    the name also matches the front part of the e-mail address, so the
    name match will always trump the e-mail match.

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_get_property_fn): Return the serialized EDestinations
    (rather than just a string w/ e-mail addresses) through the bonobo
    component's property bag.

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_export_destinationv): Added.  A convenience routine
    for serializing the model's EDestinations into a string.

    * gui/component/select-names/e-select-names-popup.c
    (add_html_mail): Added.  Puts in a check menu item for whether or
    not the recipient wants HTML mail.
    (popup_menu_card): Add menu item for HTML mail.  Enable edit
    contact info item.
    (popup_menu_nocard): Add menu item for HTML mail.  Enable edit
    contact info item.

    * backend/ebook/e-book-util.c (e_book_use_local_address_book):
    Added.  Fetches the local addressbook and caches it on the first
    call.  This is meant to be an easy and efficient way to get at the
    local addressbook with the minimum of code.
    (e_book_query_address_locally): Added.  Convenience code that
    does an e-mail only e_book_name_and_email_query against the
    local address book.

    * backend/ebook/e-destination.c
    (e_destination_set_html_mail_pref): Added.  Allows the intended
    recipient's HTML mail preference to be manipulated.
    (e_destination_get_email_verbose): Added.  Cleaned up to use
    e_destination_get_name.
    (e_destination_get_html_mail_pref): Added.  Read the recipient's HTML mail
    preference.  If the destination is linked to a card, the
    preference is taken from the card (unless it has been explicitly
    overridden by a called to e_destination_set_html_mail_pref).
    (e_destination_get_address_textv): Added.  Form a unified address string
    from a NULL-terminated vector of EDestinations.
    (e_destination_export): Added.  Serialize an EDestination to a string.
    (e_destination_import): Added.  Unserialize a string to build an
    EDestination.
    (e_destination_exportv): Added.  Serialize a NULL-terminated vector of
    EDestinations to a string.
    (e_destination_importv): Added.  Unserialize a string to build a
    NULL-terminated vector of EDestinations.

    * gui/component/select-names/e-select-names-completion.c:
    Implemented local versions of g_strcasecmp and g_strncasecmp
    (which should really be in glib, I think...) for utf8, and used
    them to make this code utf8-safe.

2001-05-17  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c (update_command_state): no more
    ContactFind command.

2001-05-17  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard-view-widget.c
    (e_minicard_view_widget_class_init): add our selection_change
    signal.
    (e_minicard_view_widget_realize): connect to the ESelectionModel's
    selection_changed signal.
    (e_minicard_view_widget_selected_count): new function.
    (selection_change): new function - emit our "selection_change"
    signal.

    * gui/widgets/e-minicard-view-widget.h (struct
    _EMinicardViewWidgetClass): add selection_change signal.  also,
    add prototype for e_minicard_view_widget_selected_count.  

    * gui/widgets/e-addressbook-view.c
    (e_addressbook_view_class_init): add our command_state_change
    signal.
    (e_addressbook_view_init): connect to the writable_status signal
    on the EAddressbookModel.
    (minicard_selection_change): new function - calls
    command_state_change.
    (create_minicard_view): connect to selection_change on the
    minicard_view so we know when to update command state.
    (table_selection_change): new function - calls
    command_state_change.
    (writable_status): new function - calls command_state_change.
    (command_state_change): new function - emits our
    "command_state_change" signal.
    (create_table_view): connect to the selection_change signal so we
    know to update the command state.
    (change_view_type): update the command state every time we change
    view types.
    (e_addressbook_view_can_create): new function.
    (e_addressbook_view_can_print): new function.
    (e_addressbook_view_can_delete): new function.
    (e_addressbook_view_can_stop): new function.

    * gui/widgets/e-addressbook-view.h (struct
    _EAddressbookViewClass): add command_state_change signal, and
    prototypes of functions the component can use to test the state of
    commands.

    * gui/widgets/e-addressbook-model.c (addressbook_destroy): unlink
    the writable_status signal on the EBook.
    (writable_status): new function.
    (e_addressbook_model_class_init): add our writable_status signal.
    (e_addressbook_model_init): init writable_status_id.
    (e_addressbook_model_set_arg): unlink the writable_status signal
    on the old EBook, and connect it on the new one.

    * gui/widgets/e-addressbook-model.h: add writable_status signal.

    * gui/component/addressbook.c (update_command_state): new
    function, set the sensitivity of the bonobo commands.
    (control_activate): update our command state immediately upon
    activating the control.
    (addressbook_factory_new_control): register command_state_change
    to update the commands.

2001-05-15  Chris Toshok  <toshok@ximian.com>

    * gui/search/e-addressbook-search-dialog.c
    (e_addressbook_search_dialog_init): initialize the model and
    adapter.
    (button_press): set on the model.
    (e_addressbook_search_dialog_new): same.
    (e_addressbook_search_dialog_set_arg): same.
    (e_addressbook_search_dialog_destroy): unref the model and
    adapter.

    * gui/search/e-addressbook-search-dialog.h (struct
    _EAddressbookSearchDialog): add our model and reflow adapter.

2001-05-16  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-minicard-view.c: (e_minicard_view_destroy): Fixed
    up the lifetime of the drag_data_get signal a bit.

2001-05-15  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard-view.c (add_to_list): MinicardViewModel
    -> ReflowAdapter name change.
    (get_card_list): same.
    (e_minicard_view_drag_begin): same.
    (supported_fields_cb): model -> adapter.
    (adapter_changed): hook up signals and set the empty message on
    our adapter.
    (e_minicard_view_set_arg): add support for "adapter", and set
    model -> adapter.
    (e_minicard_view_get_arg): same.
    (disconnect_signals): no more status_message.
    (do_remove): track to use adapter.
    (e_minicard_view_class_init): add adapter arg, and remove
    status_message.
    (e_minicard_view_init): all the code here is in adapter_changed
    now.

    * gui/widgets/e-minicard-view.h (struct _EMinicardView):
    EMinicardViewModel -> EAddressbookReflowAdapter.
    (struct _EMinicardViewClass): get rid of status_message.

    * gui/widgets/e-minicard-view-widget.c
    (e_minicard_view_widget_class_init): remove the status_message
    signal.
    (e_minicard_view_widget_new): take the adapter as our argument,
    and store it away for when we create the view.
    (e_minicard_view_widget_realize): when we create the view just set
    the adapter field on it.  also, don't connect to status_message.

    * gui/widgets/e-minicard-view-widget.h (struct
    _EMinicardViewWidget): add our adapter here, so we can pass it
    into the view when we create it.
    (struct _EMinicardViewWidgetClass): remove status_message.

    * gui/widgets/e-addressbook-view.c (status_message): new function,
    no more propagating status messages!
    (e_addressbook_view_init): create our model and conenct to its
    status_message signal.
    (book_writable_cb): set "editable" on the model, not our object.
    (e_addressbook_view_set_arg): same, but with "book" and "query" as
    well.
    (create_minicard_view): create our reflow adapter and pass it to
    the minicard view widget.  also, call e_reflow_model_changed so
    it'll pick up any already present cards.
    (table_double_click): ADDRESSBOOK_MODEL -> TABLE_ADAPTER.
    (get_card_list_1): remove the cast, since we don't need it any
    longer.
    (table_right_click): ADDRESSBOOK_MODEL -> TABLE_ADAPTER.
    (table_drag_data_get): same.
    (create_table_view): create the table adapter, and use it as our
    ETableModel.
    (change_view_type): remove the status_message hook up and setting
    of query/book/editable.
    (e_addressbook_view_stop): just call e_addressbook_model_stop here
    instead of switching on the view type.

    * gui/widgets/e-addressbook-view.h (struct _EAddressbookView): add
    our EAddressbookModel.

    * gui/widgets/Makefile.am (libeminicard_a_SOURCES): add the
    adapter files, and remove e-minicard-view-model.[ch].

    * gui/widgets/e-minicard-view-model.[ch]: removed.
    
    * gui/widgets/e-addressbook-table-adapter.c: new file.

    * gui/widgets/e-addressbook-table-adapter.h: new file.

    * gui/widgets/e-addressbook-reflow-adapter.c: new file.

    * gui/widgets/e-addressbook-reflow-adapter.h: new file.

    * gui/widgets/e-addressbook-model.c: rework this class to now
    subclass from ETableModel anymore.  It not subclasses from
    GtkObject, and we use table and reflow adapters to get at the
    data.

    * gui/widgets/e-addressbook-model.h: same.

2001-05-14  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-minicard-view-model.c (remove_card): Fix a small
    error not decreasing the data_count here.

2001-05-13  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.h: add prototype for
    addressbook_expand_uri.

    * gui/component/addressbook-component.c
    (destination_folder_handle_drop): create an EBook for
    @physical_uri.
    (dnd_drop_book_open_cb): actually add the dropped cards.

    * gui/component/addressbook.c (addressbook_expand_uri): abstract
    this code out from the set_prop method so we can use it in the
    component.
    (set_prop): call addressbook_expand_uri.

    * backend/ebook/e-card.c (e_card_load_cards_from_string): new
    function.

    * backend/ebook/e-card.h: add prototype for
    e_card_load_cards_from_string.

2001-05-12  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-component.c
    (destination_folder_handle_drop): spew the data passed to us.
    (destination_folder_handle_motion): the suggested_action is not an
    ActionSet, but an Action, so don't or together multiple actions.

2001-05-11  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-config.c (addressbook_source_dialog):
    correct bug causing the Ok button to never be enabled.

2001-05-11  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-component.c (populate_context_menu):
    example.

2001-05-11  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard-view.c (e_minicard_view_drag_data_get):
    use e_card_list_get_vcard to build up the data to send.
    (e_minicard_view_init): connect to the model's drag_begin signal.
    (e_minicard_view_drag_begin): gather the list of cards being
    dragged and call gtk_drag_begin.
    (add_to_list): new function.
    (get_card_list): same.
    (disconnect_signals): disconnect the drag_data_get signal.
    (e_minicard_view_init): connect to the drag_begin signal on our
    model.

    * gui/widgets/e-minicard-view.h (struct _EMinicardView): change
    drag_card to drag_list.
    
    * gui/widgets/e-minicard-view-model.c (minicard_drag_begin): new
    function, emit our drag_begin signal.
    (addressbook_incarnate): connect to the item's drag_begin signal.
    (e_minicard_view_model_class_init): init our drag_begin signal.

    * gui/widgets/e-minicard-view-model.h: add drag_begin signal.

    * gui/component/addressbook-config.c (addressbook_source_dialog):
    always loop through all source types here, making LDAP first so
    it's forces as the first notebook item.
    (addressbook_config_auth_label): remove SASL case.
    (addressbook_source_edit_changed): same.
    (addressbook_source_item_new): flag the area of code that needs to
    go into the advanced dialog (if we add one before someone
    graciously redesigns the entire addressbook gui :)


    * gui/component/addressbook-storage.c (ldap_unparse_auth): remove
    SASL case.
    (ldap_parse_auth): same.

    * gui/component/addressbook-storage.h: make LDAP come first in our
    source type enumeration, and remove the SASL auth type.

2001-05-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card.c (e_card_set_arg): If the name is set and
    the full_name or file_as haven't been yet, set them.

2001-05-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c: Reordered the includes here.
    (string_to_dbt): The sleepycat libdb documentation suggests
    memseting the DBT to 0 so we do that here.

    * gui/widgets/e-minicard-view-model.c (addressbook_height): Skip
    the E_CARD_SIMPLE_FIELD_FAMILY_NAME field.

    * gui/widgets/e-minicard.c (remodel): Skip the
    E_CARD_SIMPLE_FIELD_FAMILY_NAME field.

2001-05-11  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_connect): only
    check schema support if we've connected.

2001-05-11  Chris Toshok  <toshok@ximian.com>

    * contact-editor/e-contact-editor.c (enable_writable_fields):
    don't leak the ECard or ECardSimple.

2001-05-08  Iain Holmes  <iain@ximian.com>

    * backend/ebook/GNOME_Evolution_Addressbook_VCard_Importer.oaf.in:
    Renamed the GnomeCard_Importer.oaf.in to this, and change the IID.

    * Makefile.am: Rename all the GnomeCard to VCard.

    * evolution-vcard-importer.c: Make the GnomeCard a generic 
    vcard importer.

2001-05-08  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/Makefile.am (libebookinclude_HEADERS): Removed
    e-card-pairs.h since we're not using it.

    * backend/ebook/e-book-view.c (e_book_view_check_listener_queue):
    Added break; to default: case here.

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
    Added changed variable so as to avoid sync_card when possible.
    (e_card_simple_destroy): Free all the data here properly.
    (e_card_simple_get_arg): Slight simplification here.
    (fill_in_info, e_card_simple_arbitrary_foreach,
    e_card_simple_get_arbitrary): Call e_card_free_empty_lists here to
    save a bit of memory.

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Fixed up
    includes a bit.
    (e_card_list_get_vcard, e_card_list_send): Added these functions
    for acting on a group of cards.
    (parse_org): Cleaned up this function a bit.
    (e_card_free_empty_lists): Added this function to delete
    unnecessary ELists and save a bit of memory.
    (e_v_object_get_child_value): Made this return NULL if not found
    instead of g_strdup("").

    * contact-editor/e-contact-save-as.c,
    contact-editor/e-contact-save-as.h (e_contact_list_save_as): Added
    this function to save multiple contacts.

    * gui/widgets/Makefile.am: Commented out reflow test.
    (libeminicard_a_SOURCES): Added e-minicard-view-model.c and
    e-minicard-view-model.h.

    * gui/widgets/e-minicard-view-model.c,
    gui/widgets/e-minicard-view-model.h: Model for use in
    EMinicardView.

    * gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h:
    Reworked this to use the new EReflow stuff.

    * gui/widgets/e-minicard.c (e_minicard_event): Doesn't handle
    right click menus now.  Emits a signal on the parent canvas item
    instead.

    * printing/e-contact-print-envelope.c,
    printing/e-contact-print-envelope.h
    (e_contact_print_envelope_list_dialog_new): Added this function to
    print multiple envelopes (only prints first for now.)

    * printing/e-contact-print.c, printing/e-contact-print.h
    (e_contact_print_card_list_dialog_new): Added this function to
    print multiple cards.  Only prints the first for now.

2001-05-07  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-component.c (remove_folder): flesh out
    the function more.  It should work now, but there's no way to
    invoke this method from the ui at the moment, heh.

2001-05-07  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook.c (book_open_cb): Use a different
    error message in the ldap support/no ldap support/file cases.

2001-05-07  Gediminas Paulauskas <menesis@delfi.lt>

    * gui/component/addressbook.c: use define from
    widgets/misc/e-filter-bar.h instead of own enumeration and search menu
    names.

    * gui/component/Makefile.am, gui/component/select-names/Makefile.am:
    removed EVOLUTION_VERSION.

2001-05-04  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-component.c (remove_folder): un-#if 0
    this.
    (xfer_folder): add skeleton code to validate xfer request.  always
    notifies with PERMISSION_DENIED at present.
    (populate_context_menu): un-#if 0 this.
    (get_dnd_selection): same.
    (destination_folder_handle_motion): new function.
    (destination_folder_handle_drop): new function.
    (factory_fn): create a EvolutionShellComponentDndDestinationFolder
    interface, and add it to our shell component.

2001-05-04  JP Rosevear  <jpr@ximian.com>

    * backend/pas/pas-backend-file.c
    (pas_backend_file_process_get_book_view): init change_id to NULL

2001-05-02  JP Rosevear  <jpr@ximian.com>

    * gui/component/addressbook.c (addressbook_view_free): unref the
    book if the view is being destroyed

    * backend/pas/pas-backend-file.c
    (pas_backend_file_process_get_book_view): unref the book_view when
    we are finished, it is only interesting if someone else has reffed
    it now (weak reference)
    (pas_backend_file_add_client): unref the book for the same reason
    as above

    * Fixes bug #2255

2001-04-30  JP Rosevear  <jpr@ximian.com>

    * backend/pas/pas-backend-file.c (vcard_matches_search): if the
    view does not contain a search context, the result is by default
    false fixes #2470

2001-04-25  Dan Winship  <danw@ximian.com>

    * gui/component/addressbook-factory.c (main): Remove call to
    unicode_init.

2001-04-23  Jon Trowbridge  <trow@ximian.com>

    * gui/component/e-address-popup.c: Lots of code has been
    simplified here.
    (e_address_popup_factory_new_control): Rather than directly pop
    our control up in a window (via the e_address_popup_popup
    function, which is now gone), just return the widget and let the
    caller do the popping.  This works better, since it means we don't
    have to work around the vagaries of bonobo focus & event handling.
    (e_address_popup_set_name): Refresh when both name & email have
    been set, rather than checking a stupid counter.
    (e_address_popup_set_email): Ditto.

2001-04-22  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook-storage.c
    (addressbook_storage_clear_sources): Added save_source_data here.

2001-04-21  Jon Trowbridge  <trow@ximian.com>

    * contact-editor/e-contact-quick-add.c (clicked_cb): Properly
    convert to utf8. (Bug #2256)
    (build_quick_add_dialog): Properly convert from utf8. (Bug #2256)

2001-04-16  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-destination.c (e_destination_get_name): Added.

    * gui/component/select-names/e-select-names.c
    (real_add_address_cb): Use e_select_names_model_append.  It's
    nicer.

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_append): Added.

    * gui/component/select-names/e-select-names-completion.c
    (book_query_process_card_list): Filter out completion matches that
    don't have an associated e-mail address.
    (book_query_score): Give a bonus to the primary address, so that
    it always comes up first in the completion results.

    * gui/component/e-address-popup.c (e_address_popup_refresh_names):
    Convert utf8 strings into gtk strings before displaying.

2001-04-14  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book-view-listener.c,
    backend/ebook/e-book-view-listener.h: Added the function
    e_book_view_listener_stop to tell the book view listener to stop
    sending signals.

    * backend/ebook/e-book-view.c (e_book_view_destroy): Tell the
    EBookViewListener to stop when we're destroyed.

    * backend/pas/pas-backend-file.c (view_destroy,
    pas_backend_file_process_get_book_view,
    pas_backend_file_process_get_changes): Cleaned these up a bit
    using bonobo_object_ref and bonobo_object_unref.
    (pas_backend_file_process_get_book_view,
    pas_backend_file_process_get_changes): bonobo_object_release_unref
    the EBookListener here.

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_process_get_book_view): Cleaned this up a bit
    using bonobo_object_ref.  Make sure to unref the listener when
    we're done with it.  Put the new book_view in the list before
    telling the book_listener that it's ready.

    * backend/pas/pas-book-view.c (pas_book_view_construct): Cleaned
    this up a bit using bonobo_object_dup_ref.
    (pas_book_view_destroy): Cleaned this up a bit using
    bonobo_object_release_unref.

    * backend/pas/pas-book.c (pas_book_queue_get_book_view,
    pas_book_queue_get_changes): bonobo_object_dup_ref here instead of
    just duplicating.

2001-04-14  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-book-listener.c
    (impl_BookListener_respond_get_cursor): Ref the cursor here when
    we receive it.
    (impl_BookListener_respond_get_view,
    impl_BookListener_respond_get_changes): Ref the book_view here
    when we receive it.
    (impl_BookListener_respond_open_book): Ref the book here when we
    receive it.
    (e_book_listener_destroy): Unref the objects in our queue here.

    * backend/ebook/e-book-view.c (e_book_view_construct): Cleaned
    this up using bonobo_object_dup_ref.
    (e_book_view_destroy): Cleaned this up using
    bonobo_object_release_unref.

    * backend/ebook/e-book.c (e_book_do_response_get_cursor,
    e_book_do_response_get_view, e_book_do_response_get_changes,
    e_book_unload_uri): Cleaned this up using
    bonobo_object_release_unref.

2001-04-13  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_get_property_fn): Get the ESelectNamesModel from the
    widget's text model instead of storing it as a gtk_object_set_data
    since it may change.

2001-04-12  Jason Leach  <jasonleach@usa.net>

    * backend/pas/pas-backend-file.c (INITIAL_VCARD): Update the Voice
    and Fax phone numbers too, finishing off bug #1667.

2001-04-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c (INITIAL_VCARD): Update the built
    in VCard.

2001-04-12  JP Rosevear  <jpr@ximian.com>

    * conduit/address-conduit.c (local_record_from_ecard): put the
    business address into the pilot record as that is what we put into
    the desktop record
    (ecard_from_remote_record): set both the address label and
    delivery address to avoid bad parser guessing, fixes #2143

    * backend/ebook/e-card-types.h: remove deprecated pilot code

    * backend/ebook/e-card.c: ditto

    * backend/ebook/e-card.h: ditto
    
2001-04-11  JP Rosevear  <jpr@ximian.com>

    * conduit/address-conduit.c (local_record_from_ecard): Don't add
    more than five phone numbers and set the remaining blank entries
    to some reasonable defaults

2001-04-11  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card-simple.h: Added
    E_CARD_SIMPLE_FIELD_LAST_SIMPLE_STRING.

    * gui/component/addressbook-component.c (accepted_dnd_types):
    Fixed a warning here.

    * gui/widgets/e-addressbook-model.c: Modified this to have more
    columns, but not let them be edited if they're not a simple
    string.

    * gui/widgets/e-minicard-view.c (e_minicard_view_init): Fixed a
    warning and a memory leak here.

2001-04-10  Gediminas Paulauskas <menesis@delfi.lt>

    * backend/ebook/evolution-gnomecard-importer.c: added missing #include.
    * contact-editor/e-contact-editor.c (_arrow_pressed): popup menu items were
    not translated after selecting one of them.
    * gui/widgets/e-addressbook-view.c: mark popup menu items with N_().
    Updated list[] for translators.
    * gui/widgets/e-minicard.c: same.
    * gui/widgets/e-minicard-view-widget.c (e_minicard_view_widget_set_arg): fix warning
    for "editable" arg.
    * gui/widgets/e-minicard-view.c: convert "empty_message" to utf8.

2001-04-09  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-component.c (remove_folder): stubbed,
    #if 0'ed
    (xfer_folder): same.
    (populate_context_menu): same.
    (get_dnd_selection): same.
    (factory_fn): add the accepted drag types ("text/x-vard") to
    folder_types.

2001-04-09  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard.c (e_minicard_event): on BUTTON_PRESS: if
    it's button 1, store the button x, y, and set drag_button_down to
    TRUE.  on BUTTON_RELEASE: always set drag_button_down to FALSE.
    for MOTION_NOTIFY: initiate drag if the pointer has moved 3
    pixels.

    * gui/widgets/e-minicard.h (struct _EMinicard): add fields for
    button x, y, and a bit for if the button has been pressed so we
    can tell whether a motion should be a drag.
    (struct _EMinicardClass): add drag_begin signal.

    * gui/widgets/e-minicard-view.c (e_minicard_view_drag_begin): new
    function, starts the drag.
    (book_view_loaded): connect the "drag_data_get" signal.
    (e_minicard_view_drag_data_get): new function.

    * gui/widgets/e-minicard-view.h (struct _EMinicardView): add
    drag_card and id for canvas_drag_data_get_id.

    * gui/widgets/e-addressbook-view.c (table_drag_data_get): new
    function.
    (create_table_view): add d&d stuff.

2001-04-08  Chris Toshok  <toshok@ximian.com>

    * printing/e-contact-print.c: add #include <sys/types.h> since
    gnome-print.h uses time_t without including it.  this really
    should be fixed in gnome-print.

2001-04-08  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_add_client):
    make sure to notify new clients to the writable status of an
    already open (and authenticated) book.

2001-04-04  Kjartan Maraas  <kmaraas@gnome.org>

    * contact-editor/e-contact-editor.[ch]: Fix headers.
    * component/addressbook-storage.c: Same here.
    * gui/search/e-addressbook-search-dialog.c: Same here.
    * gui/widgets/e-addressbook-view.c: Same here.
    * gui/widgets/e-minicard-label.c: Same here.
    * gui/widgets/e-minicard-view-widget.c: Same here.
    * gui/widgets/e-minicard-view.c: Same here.
    * gui/widgets/e-minicard-widget-test.c: Same here.
    * gui/widgets/e-minicard-widget.c: Same here.
    * gui/widgets/e-minicard.c: Same here.
    * gui/widgets/test-minicard-label.c: Same here.

2001-04-03  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-view.c (table_double_click): Fixed a
    crash here.

2001-04-03  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-model.c (COLS): Made this table model
    more consistent in the number of columns it has.
    (addressbook_append_row): Fixed this function.  We removed the col
    offset.

2001-04-02  Iain Holmes  <iain@ximian.com>

    * backend/ebook/evolution-gnomecard-importer.c (importer_init): Shut
    down and unregister the factory on exit. 

2001-04-01  Gediminas Paulauskas <menesis@delfi.lt>

    * contact-editor/contact-editor.glade: changed icon to
    evolution-contacts-plain.png.
    * gui/component/addressbook.c: use new pixmap cache. Added icon for new
    contact, print, print preview, changed filenames of renamed icons.

2001-03-31  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names.c
    (real_add_address_cb): Call e_select_names_model_clean after
    adding address.  This should deal with the bug reports related
    to stray commas.

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_clean): Added.  Remove all empty destinations.

    * backend/ebook/e-destination.c (e_destination_is_empty): Added.  Check
    if an EDestination is in essentially a null state.

2001-03-30  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c (pas_backend_file_add_client):
    Tell new clients that are added whether they're writable.

2001-03-29  Jon Trowbridge  <trow@ximian.com>

    * printing/e-contact-print.c: Added #include <libgnome/gnome-paper.h>
    
    * printing/e-contact-print-envelope.c: Added #include <time.h>
    and #include <libgnome/gnome-paper.h>

2001-04-03  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (match_email): Better handle matching of "nameless" contacts.

    * backend/ebook/e-destination.c (e_destination_get_string): Better
    handle the case of a "nameless" contact.

2001-03-29  Kjartan Maraas  <kmaraas@gnome.org>

    * *.*: Clean up #includes. Replace <gnome.h>, <bonobo.h> and
    <gtk/gtk.h> with more finegrained headers where needed.

2001-03-28  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card.c (e_card_set_arg): Fixed some crashes.

2001-03-28  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names-table-model.c
    (fill_in_info): Use E_CARD_SIMPLE_FIELD_NAME_OR_ORG instead of
    getting the NAME and then the ORG.  That way if we expand
    NAME_OR_ORG, this will use it.

    * gui/component/select-names/e-select-names.c
    (e_addressbook_create_ebook_table, SPEC): Use the correct column
    in the SPEC.

2001-03-25  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c
    (e_select_names_completion_seq_complete_cb): Rather than starting
    the pending query by directly calling
    e_select_names_completion_do_query, call
    e_completion_begin_search.  Circumventing the ECompletion API was
    causing it to get confused in some cases.

2001-03-23  Jon Trowbridge  <trow@ximian.com>

    * gui/widgets/e-minicard-widget.c (e_minicard_widget_set_card):
    Added.  Call me old-fashioned, but I just prefer to have a real
    API rather than doing everything via gtk_object_get/set-type
    calls.
    (e_minicard_widget_set_arg): Changed to call
    e_minicard_widget_set_card.

    * backend/ebook/e-book-util.c: Small changes to get rid of
    compiler warnings.  (Casting out const, removed unused variables,
    etc.)  Removed some debugging messages.

    * gui/component/addressbook-factory.c (main): Added call
    to e_address_popup_factory_init.

    * gui/component/e-address-popup.c: Added.  A popup gadget that is
    invoked (as a bonobo control) when an address is left-clicked in
    the mailer.  The addressbook is queries, and the address is either
    displayed as a minicard (if it already exists) or in a "generic
    format".  A button is provided for editting/adding the contact.
    Some of the semantics of this widget are a bit... non-standard,
    because of bonobo issues.  I can't really seem to replicate
    popup-menu behavior because of how bonobo propogates events, etc.
    so I've tried to produce something that I think is non-annoying.
    YMMV.

2001-03-22  Iain Holmes  <iain@ximian.com>

    * backend/ebook/evolution-gnomecard-importer.c: Update to the new
    IDL.

2001-03-20  Miguel de Icaza  <miguel@ximian.com>

    * gui/component/addressbook.c (update_pixmaps): Added artwork from
    Jakub. 

2001-03-19  Christopher James Lahey  <clahey@ximian.com>

    * Merged branch:

2001-03-14  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-minicard-view.c: Call
    e_selection_model_simple_insert_rows and
    e_selection_model_simple_delete_rows instead of
    e_selection_model_simple_insert_row and
    e_selection_model_simple_delete_row.

End of branch

2001-03-17  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-completion.c: Brutally
    refactored to boost performance in large-addressbook situations.
    These fixes give accepable performance (even with the suboptimal
    pas-backend-file searching) using tigert's addressbook-of-death.

    * backend/pas/pas-backend-file.c (pas_backend_file_search): 
    Start feeding query matches back to the caller before the
    entire search is complete; this gives us some "instant feedback"
    rather than causing evolution to totally lock up...

    * backend/ebook/e-book.c (e_book_queue_op): Tag all queued ops.
    (e_book_cancel_op): Added.  Search for a pending op with a given
    tag, and mark it as inactive.
    (e_book_do_response_get_cursor): Don't execute callback if this
    operations has been cancelled.
    (e_book_do_response_get_view): Ditto.
    (e_book_do_response_get_changes): Ditto.
    (e_book_do_response_get_supported_fields): Ditto.
    (e_book_get_supported_fields): Return an operation tag (that can
    be used to cancel the operation) rather than just TRUE/FALSE.
    Zero is always an invalid tag and is returned in the case of an
    error, so this shouldn't break any code that looked at the return
    value (unless it did so in a particularly stupid way, of course).
    (e_book_get_cursor): Ditto.
    (e_book_get_book_view): Ditto.
    (e_book_get_changes): Ditto.
    (e_book_cancel): Added.  Cancel a pending operation.  (Basically
    a call to e_book_cancel_op with error checking, etc.)

    * backend/ebook/e-book-types.h: Added E_BOOK_STATUS_CANCELLED.

2001-03-17  Chris Toshok  <toshok@ximian.com>

    * backend/ebook/e-book-listener.c
    (e_book_listener_queue_writable_status): new function.
    (impl_BookListener_report_writable): new function.
    (e_book_listener_get_epv): fill in epv->notifyWritable.

    * backend/ebook/e-book-listener.h: add writable status entries.

    * backend/ebook/e-book.c (e_book_do_writable_event): new function.
    (e_book_check_listener_queue): add WritableStatusEvent to the
    switch.
    (e_book_class_init): register writable_status signal.

    * backend/ebook/e-book.h: add writable_status signal.

    * backend/idl/addressbook.idl: add notifyWritable method to
    BookListener.

    * gui/widgets/e-minicard.c (e_minicard_class_init): add "editable"
    arg.
    (e_minicard_init): init editable.
    (e_minicard_set_arg): loop over the minicard fields setting their
    "editable".
    (e_minicard_get_arg): add editable.
    (supported_fields_cb): use editable when creating the
    contact_editor.
    (add_field): set "editable" when creatin the e_minicard.

    * gui/widgets/e-minicard.h (struct _EMinicard): add "editable".

    * gui/widgets/e-minicard-view.c (e_minicard_view_class_init): add
    editable arg.
    (e_minicard_view_init): init editable.
    (create_card): pass editable to e_minicard canvas item.
    (e_minicard_view_set_arg): bit of a hack - loop over all the
    canvas items setting their "editable."
    (e_minicard_view_get_arg): add editable.
    (supported_fields_cb): use editable when creating the contact
    editor.

    * gui/widgets/e-minicard-view.h (struct _EMinicardView): add
    "editable."

    * gui/widgets/e-minicard-view-widget.c
    (e_minicard_view_widget_class_init): add "editable" field.
    (e_minicard_view_widget_init): init editable to FALSE.
    (e_minicard_view_widget_set_arg): save editable, and pass it along
    the e-minicard-view.
    (e_minicard_view_widget_realize): same.
    (e_minicard_view_widget_get_arg): add editable.

    * gui/widgets/e-minicard-view-widget.h (struct
    _EMinicardViewWidget): add "editable" field.

    * gui/widgets/e-minicard-label.h (struct _EMinicardLabel): add
    "editable" field.

    * gui/widgets/e-minicard-label.c (e_minicard_label_class_init):
    add "editable" arg.
    (e_minicard_label_set_arg): editable, set it on the e_text too.
    (e_minicard_label_get_arg): editable.
    (e_minicard_label_construct): set the "editable" field when we
    create the e_text cavas item

    * gui/widgets/e-addressbook-view.c (e_addressbook_view_init):
    default editable to FALSE.
    (book_writable_cb): new function, set our editable field and
    gtk_object_set it on the active view.
    (e_addressbook_view_set_arg): set the active view's editable when
    we set the view's book, and connect the "writable_status" signal
    to book_writable_cb.
    (change_view_type): same.
    (supported_fields_cb): use our "editable" when creating the
    contact editor.

    * gui/widgets/e-addressbook-view.h (struct _EAddressbookView): add
    editable field.

    * gui/widgets/e-addressbook-model.c (e_addressbook_model_init):
    change the default of editable to FALSE.

    * backend/pas/pas-book.c (pas_book_report_writable): new function.

    * backend/pas/pas-book.h: prototype for pas_book_report_writable.

    * backend/pas/pas-backend-file.c (pas_backend_file_load_uri): if
    we open the file O_RDWR (or create it) report it as writable.  if
    we can't open it as O_RDWR, try opening it read-only before we
    attempt to create it.

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_process_authenticate_user): if we authenticate
    successfully, grant write permissions (this is lacking but there's
    really nothing we can do to determine the extent of the access
    afforded a user.)


2001-03-15  Jon Trowbridge  <trow@ximian.com>

    * gui/component/e-address-widget.c: Added addressbook querying and
    "cardification" functions, which are turned off by default for now
    because of addressbook bugs.  Added a popup menu option to turn
    queries on, so that others can enjoy the thrill of massive flaming
    death.

    * gui/component/addressbook-factory.c (main): Made warnings always
    be fatal.

    * backend/pas/pas-book-view.c: Added some debugging spew.

    * backend/pas/pas-backend-file.c (pas_backend_file_search): Added
    a little experimental code to try to make file searches scale
    better.  #if 0/#endif-ed out for now.

    * contact-editor/e-contact-quick-add.c: #included e-book-util.h.

    * backend/ebook/e-card.c (e_card_name_match_string): Added.
    Looser name-matching function.
    (e_card_email_match_string): Added.  Loose e-mail matching.

    * backend/ebook/e-book-view-listener.c
    (e_book_view_listener_check_queue): Added code to cause us to
    abort rather than get trapped in a 100%-CPU-consuming loop in
    certain situations.  Now we just need to figure out how to avoid
    these situations altogether.

    * backend/ebook/e-book-util.c: Added.  Now contains the simple
    query stuff and the open local addressbook functions.

    * backend/ebook/e-book.c: Moved simple query stuff and open local
    addressbook functions into e-book-util.c.

2001-03-15  Dan Winship  <danw@ximian.com>

    * gui/widgets/e-minicard-label.c (e_minicard_label_set_arg): 
    * gui/widgets/e-minicard.c (e_minicard_set_arg, e_minicard_event):
    Update arguments to e_canvas_item_grab_focus.

2001-03-13  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/addressbook.c (update_pixmaps): Fix a warning
    here.

2001-03-13  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/Makefile.am (minicard_label_test_LDADD): Change to
    ld order from Greg Williams.

2001-03-13  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c
    (pas_backend_file_process_get_book_view): Moved where we call
    pas_book_respond_get_book_view.

2001-03-12  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c: add E_STRING_PROP for
    categories.

    * backend/pas/evolutionperson.schema: add categories attribute.

    * backend/ebook/e-card-simple.c (field_data): add
    E_CARD_SIMPLE_FIELD_CATEGORIES.

    * backend/ebook/e-card-simple.h: add
    E_CARD_SIMPLE_FIELD_CATEGORIES.

2001-03-12  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard.c (supported_fields_cb): add is_read_only
    param.

    * gui/widgets/e-minicard-view.c (supported_fields_cb): add
    is_read_only param.

    * gui/widgets/e-addressbook-view.c (supported_fields_cb): add
    is_read_only param.

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_activate_obj): add is_read_only param.
    also, include a little policy here and make it TRUE, as the user
    shouldn't be editting in this context anyway (imo).

    * gui/component/addressbook.c (supported_fields_cb): add
    is_read_only param.

    * contact-editor/test-editor.c (main): add is_read_only param.

    * contact-editor/e-contact-editor.c (set_read_only): new function,
    that either enables or disables all the text fields, combo boxes,
    and some buttons, depending on the state of is_read_only.
    (e_contact_editor_class_init): add read/write arg "is_read_only".
    (full_name_clicked): set the is_read_only of the fullname dialog
    to the editor's.
    (full_addr_clicked): same.
    (e_contact_editor_new): add is_read_only param, that gets set
    along with the other params.
    (e_contact_editor_set_arg): add setter for is_read_only.
    (e_contact_editor_get_arg): add getter for is_read_only.
    (_phone_arrow_pressed): change TRUE to !editor->is_read_only for
    entry.
    (_email_arrow_pressed): same.
    (_address_arrow_pressed): same.
    (enable_writable_fields): same.

    * contact-editor/e-contact-editor-fullname.c
    (e_contact_editor_fullname_class_init): add read/write arg
    "is_read_only".
    (e_contact_editor_fullname_set_arg): add setter for is_read_only
    that enables/disables all the entries/combos.
    (e_contact_editor_fullname_get_arg): add getter for is_read_only.

    * contact-editor/e-contact-editor-fullname.h (struct
    _EContactEditorFullname): add is_read_only flag.

    * contact-editor/e-contact-editor-address.c
    (e_contact_editor_address_class_init): add read/write arg
    "is_read_only".
    (e_contact_editor_address_set_arg): add setter for is_read_only
    that disables/enables all the entries/combos.
    (e_contact_editor_address_get_arg): add getter for is_read_only.

    * contact-editor/e-contact-editor-address.h (struct
    _EContactEditorAddress): add is_read_only flag.

2001-03-13  Iain Holmes  <iain@ximian.com>

    * backend/ebook/Makefile.am: Change the importer includes around a bit.

    * backend/ebook/evolution-gnomecard-importer.c: Correctly add the includes.

2001-03-09  JP Rosevear  <jpr@ximian.com>

    * conduit/Makefile.am: PISOCK_INCLUDEDIR has become
    PISOCK_CFLAGS in gnome-pilot.m4 and remove capplet foo

2001-03-11  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-book.c (e_book_simple_query): Added. A
    simplified, cancellable query mechanism that lets you avoid
    dealing with EBookView.
    (e_book_simple_query_cancel): Added. Cancels a running query.

    * backend/ebook/e-book-types.h: Add enum EBookSimpleQueryStatus.

2001-03-08  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-popup.c
    (quick_add_cb): Switched to use e_contact_quick_add_free_form.
    Removed debugging code, hopefully without introducing any bugs
    in the process.

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_insert_length): Fix bug with commas
    inside of name/address combos.  As long as the comma is inside of
    quotes, it will be treated as part of the name rather than as a
    break between addresses.

    * gui/component/select-names/e-select-names-completion.c
    (match_nickname): Use e_card_name_to_string for nickname match
    strings.
    (match_email): Use e_card_name_to_string for email match strings.
    (e_select_names_completion_begin): Strip quotes out of query text,
    so we don't produce malformed sexps.
    Added William Blake quote easter egg.

    * contact-editor/e-contact-quick-add.c: Further attempts to fix...
    mostly unsuccessful.
    (e_contact_quick_add_free_form): Added.  Takes a single string
    and tries to parse out (using some simple, loose rules) the
    name and e-mail -- then calls e_contact_quick_add.  An attempt to 
    get the computer to automatically Do The Right Thing.

    * backend/ebook/e-book.c: Fixed some broken indentation.  Yes, I'm
    anal.

    * gui/component/GNOME_Evolution_Addressbook.oafinfo: Added oaf_server
    info for EAddressWidget.

    * gui/component/GNOME_Evolution_Addressbook.oaf.in: Added oaf_server
    info for EAddressWidget.

    * gui/component/addressbook-factory.c (main): Add call to
    e_address_widget_factory_init.

    * gui/component/e-address-widget.h: 
    * gui/component/e-address-widget.c: Added.  A little widget (and a
    Bonobo control, BTW) for displaying addresses, with a left-click
    menu.  Used to display addresses in the mail viewer (as embedded
    GtkHTML objects, replacing the text previously used).  Still quite
    incomplete.

2001-03-08  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook-component.c (factory_fn): Specify a
    NULL `EvolutionShellComponentGetDndSelectionFn'.

2001-03-06  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_insert_length): Fix glitch with
    inserting comma-delimited stuff when length > 1.

2001-03-06  Jon Trowbridge  <trow@ximian.com>

    * backend/ebook/e-book.c (e_book_load_local_address_book): Added.
    Just encapsulates opening
    file://~username/evolution/local/Contactes/addressbook.db, so that
    path doesn't need to be hardwired in throughout the code.

2001-03-06  Benjamin Kahn  <xkahn@cybersites.com>

    * contact-editor/e-contact-quick-add.c (clicked_cb): 
    Added the third argument to e_contact_editor_new.  (Cheated
    and send NULL for the field argument, which is probably
    troublesome.  It will be fixed soon by either clahey or 
    toshok.)

2001-03-06  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-model.c
    (e_select_names_model_replace): Fix a reference counting bug.

    * gui/component/select-names/e-select-names-manager.c (popup_cb):
    A callback for creating the appropriate popup by calling
    e_select_names_popup.
    (e_select_names_manager_create_entry): Connect popup_cb to the
    entry's popup signal

    * gui/component/select-names/e-select-names-popup.c: Added.  Code
    for popup right-click menus for recipient entries.  Still a bit
    incomplete.

    * backend/ebook/e-destination.c (e_destination_get_email_num):
    Added.

    * contact-editor/e-contact-quick-add.c: Added.  Some code and a
    dialog for very quickly adding entries to the address book.
    Still not fully working.

2001-03-04  Christopher James Lahey  <clahey@ximian.com>

    * backend/ebook/e-card-simple.c: Cleaned up the formatting in this
    file a bit.

    * contact-editor/e-contact-editor.c (e_contact_editor_set_arg):
    Made it so that passing in NULL to the writable_fields arg sets
    the set of writable fields to the empty set.

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_activate_obj): Pass NULL as the
    writable_fields argument here.

    * gui/widgets/e-addressbook-model.c: Don't offset by one here.
    This way we will get the file_as field as one of our
    ETableColumns.

    * gui/widgets/e-addressbook-view.c (SPEC): Updated this for the
    changes in ECardSimple.

    * gui/widgets/e-minicard.c (remodel): Don't remodel if the item
    isn't realized.

2001-03-02  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c: doh, track renaming of
    objectclass from evolvePerson to evolutionPerson.

2001-03-02  Chris Toshok  <toshok@ximian.com>

    * backend/pas/evolutionperson.schema: rename evolveperson.schema
    to this, and add remaining attributes.

    * backend/pas/pas-backend-ldap.c: add remaining fields, and fix up
    ones that were incorrent (either the ldap_attr or the query prop).

2001-03-02  JP Rosevear  <jpr@ximian.com>

    * conduit/Makefile.am: update sed script

    * conduit/e-address.conduit.in: update for new pilot foo

2001-03-02  Chris Toshok  <toshok@ximian.com>

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_activate_obj): track change to
    e_contact_editor_new.

2001-03-02  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (add_objectclass_mod): add
    objectclasses for "person", "organizationalPerson", and "top" as
    well, just to be complete.
    (check_schema_support): rename check_for_evolve_person to this, to
    reflect that we're doing more than just checking for that
    objectClass.
    (add_oc_attributes_to_supported_fields): new function.
    (add_to_supported_fields): new function.
    (pas_backend_ldap_destroy): unref supported_fields.

2001-03-02  Chris Toshok  <toshok@ximian.com>

    * gui/widgets/e-minicard-view.c (supported_fields_cb): new
    function.
    (e_minicard_view_event): split out the creation of the contact
    editor to the supported_fields callback.

    * gui/widgets/e-minicard.c (supported_fields_cb): new function.
    (e_minicard_event): split out the creation of the contact editor
    to the supported_fields callback.

    * gui/widgets/e-addressbook-view.c (table_double_click): split
    function into two functions, since e_book_get_supported_fields
    requires a callback now.
    (supported_fields_cb): new function.

    * gui/component/addressbook.c (new_contact_cb): split this into
    two functions, since e_book_get_supported_fields requires a
    callback now.
    (supported_fields_cb): new function.

    * contact-editor/test-editor.c (main): track change to
    e_contact_editor_new (pass NULL for the writable_fields arg.)

    * contact-editor/contact-editor.glade: fix several labels so they
    make better sense (since we look them up in e-contact-editor.c.)

    * contact-editor/e-contact-editor.h (struct _EContactEditor): add
    writable_fields.  also, add it to e_contact_editor_new.
    
    * contact-editor/e-contact-editor.c (e_contact_editor_class_init):
    add writable_fields arg.
    (e_contact_editor_destroy): unref the writable_fields list.
    (e_contact_editor_new): pass @fields as the writable_fields arg.
    (e_contact_editor_set_arg): add writable_fields support.
    (enable_writable_fields): new (very hairy) function, to disable
    everything and reenable just the fields listed in the
    writable_fields list.
    (_email_arrow_pressed): set label-email1, entry-email1, and
    checkbutton-htmlmail to be sensitive since the only way to get
    here is to activate a writable field in the menu.
    (_address_arrow_pressed): set label-address, button-fulladdr, and
    text-address to be sensitive for the same reason.
    (_phone_arrow_pressed): sensitize the label and entry for the same
    reason.

2001-03-02  Chris Toshok  <toshok@ximian.com>

    * backend/ebook/e-card-simple.c (field_data): add new entries for
    phone enums, and fill in the ecard_field with (bogus in all but a
    few cases) strings.  these are the strings sent from wombat to
    evolution-addressbook for supported_fields.
    (e_card_simple_get_ecard_field): new function.
    (e_card_simple_map_phone_to_field): new function.
    (e_card_simple_map_email_to_field): new function.
    (e_card_simple_map_address_to_field): new function.

    * backend/ebook/e-card-simple.h: add a few phone entries to the
    ECardSimpleField enum, and add prototypes for mapping the list
    types (phone, email, address) to ECardSimpleField.  Also, add
    prototype for e_card_simple_get_ecard_field.

    * backend/ebook/e-book.c
    (e_book_do_response_get_supported_fields): don't build the EList
    here, it's already built.

    * backend/ebook/e-book-listener.h: change fields from the CORBA
    sequence to the EList in our reponse struct.

    * backend/ebook/e-book-listener.c
    (e_book_listener_queue_get_supported_fields_response): we make the
    EList here, since after we return the CORBA list is freed up.

2001-03-02  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-file.c
    (pas_backend_file_process_get_supported_fields): implement
    properly, we support everything.

2001-03-01  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_set_property_fn): Oops, we do need to be able to write to
    "text" after all (for things like Reply-to: to work properly).
    Fixed.
    (impl_SelectNames_get_entry_for_section): Made "text" a writeable
    property again.

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_insert_length): Increment pos so that
    we don't reverse strings when length > 1 (a particularly amusing
    bug).

    * gui/component/select-names/e-select-names-completion.c
    (e_select_names_completion_destroy): Check for NULL before calling
    gtk_object_unref (GTK_OBJECT (---)), to get rid of annoying error
    messages.

2001-03-01  Jon Trowbridge  <trow@ximian.com>
    
    * gui/component/select-names/e-select-names-completion.c: I am an
    idiot.

2001-03-01  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-table-model.c
    (fill_in_info): Change for new EDestination/ESelectNamesModel API.

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_manager_get_source): Added.  A function for
    looking up the ESelectNamesModel by id.  (I didn't end up using
    this function, but it might come in handy later.)
    (e_select_names_manager_get_cards): #if 0/#endif out this
    function.
    (e_select_names_manager_create_entry): Modified to attach an
    ESelectNamesCompletion to the entry we create.
    (completion_handler): A post-completion handler for our EEntry, to
    take the completion's extra data (an EDestination) and properly
    stick it into our ESelectNamesModel.

    * gui/component/select-names/e-select-names.c
    (real_add_address_cb): Changed to operate on EDestinations rather
    than ECards and to use the new ESelectNamesModel API.  This leads
    to a rather nice code simplication.
    (remove_address): Changed for new ESelectNamesModel API.

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_get_property_fn): Rather than just passing the entry's text
    through the property bag, get the "address text" from the model.
    This returns a nice, verbose string of addresses with names
    expanded when the address is tied to an ECard (i.e. "Jon
    Trowbridge <trow@ximian.com>").
    (impl_SelectNames_get_entry_for_section): Make the text property
    read-only.
    (entry_set_property_fn): ...and since it is read-only now, chop
    out the setter code.
    
    * gui/component/select-names/e-select-names-text-model.h: 
    * gui/component/select-names/e-select-names-text-model.c: Again,
    this code has been (pretty much) totally rewritten to convert all
    text operations into changes on the ESelectNamesModel.  This lets
    us give the associated EEntry some (IMHO) nice semantics regarding
    whitespace, etc.  Includes object activation, so destinations tied
    to ECards are underlined and can be double-clicked to bring up a
    contact editor.

    * gui/component/select-names/e-select-names-model.h: 
    * gui/component/select-names/e-select-names-model.c: I've heavily
    modified this object to both hide all implementation details
    (which the old version exposed a bit too much for my peculiar
    tastes) and to act as an EDestination container.  The old code put
    the text model operations here.  I've moved them all to
    ESelectNamesTextModel --- so the text model actions (insert,
    delete, etc.) are all done through the API rather than operating on
    ESelectNamesModel internals.

    * gui/component/select-names/e-select-names-completion.c: Added.  A
    fairly complicated object derived from ECompletion that searches
    our local addressbook in various and sundry ways.

    * gui/component/select-names/e-select-names-completion.h: 

    * backend/ebook/e-destination.h: 
    * backend/ebook/e-destination.c: Added.  This object encapsulates
    a place to sent an email to, which can either be just a address as
    a string ("trow@ximian.com"), a fancier string ("Jon Trowbridge
    <trow@ximian.com>"), or an ECard and a specific address within
    that ECard.

2001-03-01  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h,
    gui/widgets/e-minicard.c, gui/widgets/e-minicard.h: Used
    ESelectionModelSimple and the changes to EReflow and EReflowSorted
    to get multiple selection in the minicard view.

    * gui/widgets/test-reflow.c: Changed this to get it to compile
    with the changes to EReflow.

2001-02-21  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-file.c (pas_backend_file_search): Made
    this pay attention to the return value of e_sexp_parse.

    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_activate_obj): Fixed a const
    inconsistency here.

2001-02-21  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-book.c (pas_book_queue_get_supported_fields):
    new function.
    (impl_GNOME_Evolution_Addressbook_Book_getSupportedFields): track
    change to idl.
    (pas_book_respond_get_supported_fields): new function.

    * backend/pas/pas-book.h: add GetSupportedFields to the
    PASOperation enum.  Also, add a stringlist field to the PASRequest
    struct.  lastly, add a prototype for
    pas_book_respond_get_supported_fields.
    
    * backend/pas/pas-backend.h: remove prototype for
    pas_backend_get_supported_fields, and remove it from the vtable.

    * backend/pas/pas-backend.c (pas_backend_get_supported_fields):
    remove.
    (pas_backend_class_init): no vtable entry for get_supported_fields
    anymore.

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_process_get_supported_fields): new function.
    (pas_backend_ldap_process_client_requests): add case for
    GetSupportedFields.
    (pas_backend_ldap_class_init): get_supported_fields isn't in
    vtable anymore.

    * backend/pas/pas-backend-file.c
    (pas_backend_file_process_get_supported_fields): new function.
    (pas_backend_file_process_client_requests): add case for
    GetSupportedFields.
    (pas_backend_file_class_init): get_supported_fields isn't in
    vtable anymore.

    * backend/idl/addressbook.idl: Book::getSupportedFields now
    returns void and add BookListener::notifySupportedFields.

    * backend/ebook/test-client.c (get_fields_cb): new function.
    (auth_user_cb): track change to e_book_get_supported_fields.

    * backend/ebook/e-book.c
    (e_book_do_response_get_supported_fields): new function.
    (e_book_check_listener_queue): add case
    GetSupportedFieldsResponse.
    (e_book_get_supported_fields): switch to async model.

    * backend/ebook/e-book.h: switch e_book_get_supported_fields to an
    async model.

    * backend/ebook/e-book-listener.c
    (e_book_listener_queue_get_supported_fields_response): new
    function.
    (impl_BookListener_response_get_supported_fields): new function.
    (e_book_listener_get_epv): fill in epv's "notifySupportedFields"

    * backend/ebook/e-book-listener.h: add an async response for
    GetSupportedFields and add a stringlist member to the
    EBookListenerResponse struct.

2001-02-20  Federico Mena Quintero  <federico@ximian.com>

    * backend/pas/pas-book-factory.c (pas_book_factory_activate):
    Moved the register_factory() code to here, since it was the only
    thing being called anyways.
    (PasBookFactoryPrivate): Added a "registered" flag.
    (pas_book_factory_activate): Set the registered flag.
    (pas_book_factory_destroy): Deactivate the factory when we go away.

2001-02-20  Chris Toshok  <toshok@ximian.com>

    * backend/ebook/e-book.c (e_book_get_supported_fields): new function.

    * backend/ebook/e-book.h: add e-book interface to getting
    supported fields.

    * backend/ebook/test-client.c (auth_user_cb): shoe-horn in some
    spew about supported fields.

2001-02-19  JP Rosevear  <jpr@ximian.com>

    * conduit/Makefile.am: Remove PISOCK_LIBDIR

2001-02-19  Jon Trowbridge  <trow@ximian.com>

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_manager_create_entry): When creating the entry,
    open up an ebook (corresponding to the local addressbook) and make
    the entry use an EAddressCompletion.
    (completion_handler): Added; this is the actual completion
    handler, which manipulates the entry when the user selects
    something from the drop-down.

    * gui/component/select-names/e-select-names-model.c: Various hacks
    by clahey to unbreak e_select_names_model_add_item,
    e_select_names_model_replace_item (which I added) and
    e_select_names_model_remove_item.
    
    * gui/component/select-names/e-select-names-text-model.c
    (e_select_names_text_model_obj_count,
    e_select_names_text_model_get_nth_obj): Make chunks of text that
    correspond to ECards in the ESelectNamesModel be embedded objects.
    (e_select_names_text_model_activate_obj): On activation, pop up a
    contact editor for the embedded object's card.
    (e_select_names_text_model_model_changed): Fixed to work with
    ETextModel API changes.
    (e_select_names_text_model_set_text): Make const correct.
    (e_select_names_text_model_insert): Make const correct.
    (e_select_names_text_model_insert_length): Make const correct.

    * backend/ebook/e-address-completion.h,
    backend/ebook/e-address-completion.c: Added.  EAddressCompletion
    is a derived class of ECompletion that does asynchronous address
    lookups for completions.

2001-02-17  Chris Toshok  <toshok@ximian.com>

    * backend/idl/addressbook.idl: add sequence<string> typedef, and
    add getSupportedFields method.

    * backend/pas/pas-book.c
    (impl_GNOME_Evolution_Addressbook_Book_getSupportedFields): new
    function.

    * backend/pas/pas-backend.c (pas_backend_class_init): init
    get_supported_fields = NULL.
    (pas_backend_get_supported_fields): new function.

    * backend/pas/pas-backend.h: add prototype for
    pas_backend_get_supported_fields.

    * backend/pas/pas-backend-file.c
    (pas_backend_file_get_supported_fields): new function.
    (pas_backend_file_class_init): fill in get_supported_fields.

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_get_supported_fields): new function.
    (pas_backend_ldap_class_init): fill in get_supported_fields.

2001-02-14  Christopher James Lahey  <clahey@ximian.com>

    * backend/pas/pas-backend-ldap.c: Undefine E_STRING_PROP and
    E_LIST_PROP here.

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h (e_contact_editor_raise): Added
    this function.

    * gui/widgets/e-minicard.c, gui/widgets/e-minicard.h
    (e_minicard_event): Added an editor field to the EMinicard object.
    Made it so that if you double click on the same card twice, it
    doesn't open a new window, but instead raises the old.

2001-02-08  Iain Holmes  <iain@ximian.com>

    * gui/component/addressbook-storage.c (addressbook_source_free):
    Free the ldap.binddn.

    * gui/widgets/e-addressbook-view.c
    (e_addressbook_view_setup_menus): Free the dir strings.

2001-02-08  Christopher James Lahey  <clahey@ximian.com>

    * contact-editor/e-contact-editor.c (categories_clicked): Set the
    header on the category dialog we pop up.

2001-02-12  Kjartan Maraas  <kmaraas@gnome.org>

    * backend/ebook/GNOME_Evolution_Addressbook_GnomeCard_Importer.oaf.in: Translations.
    * gui/component/select-names/GNOME_Evolution_Addressbook_SelectNames.oaf.in:
    Marked strings for translation in this newly created file.
    * gui/component/select-names/Makefile.am: Hook up the .oaf.in files in the
    xml-i18n-tools framework.
    * gui/component/Makefile.am: Same as above.
    * gui/component/GNOME_Evolution_Addressbook.oaf.in: Marked stuff for translation here
    too.
    
2001-02-11  Jason Leach  <jasonleach@usa.net>

    * gui/component/addressbook.c: Removed an ancient #include
    <libgnorba/gnorba.h>

2001-02-11  Gediminas Paulauskas <menesis@delfi.lt>

    Really use xml-i18n-tools.
    
    * conduit/e-address-conduit-control-applet.desktop: removed.
    * conduit/e-address-conduit-control-applet.desktop.in: added empty.
    * conduit/Makefile.am: reflect above changes, merge translations.
    
    * contact-editor/e-contact-editor-strings.h,
    contact-editor/fulladdr.glade.h, contact-editor/fullname-strings.h,
    contact-editor/e-contact-editor-confirm-delete.glade.h,
    gui/component/select-names/select-names.glade.h:
    removed these files, xml-i18n-extract takes care of strings itself.
    
    * contact-editor/*.glade,
    gui/component/select-names/select-names.glade,
    gui/widgets/alphabet.glade, printing/e-contact-print.glade:
    changed project options to not output_translatable_strings.
    
    * contact-editor/Makefile.am, gui/widgets/Makefile.am,
    gui/component/select-names/Makefile.am, printing/Makefile.am:
    do not include removed files in EXTRA_DIST.

2001-02-07  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (check_for_evolve_person): flesh
    out this check.  #ifdef the entire thing OPENLDAP2, as it only
    works with the new schema stuff in openldap 2.x (both on server
    and client, so upgrade your server.)
    
2001-02-07  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/e-addressbook-view.c: Added N_("* Click here to add
    a contact *").

2001-02-07  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_connect): only
    set the DEBUG_LEVEL if we're OPENLDAP2.

2001-02-06  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (email_compare): return TRUE if
    equal, FALSE otherwise.
    (business_compare): same.
    (homephone_compare): same.
    (email_ber): return NULL if there are no elements in our list.
    (homephone_ber): same.
    (business_ber): same.
    (build_mods_from_ecards): add smarts to handle list elements
    properly (like email, business_phone, home_phone.)  now we'll
    properly send updates if any element in the list changes.

2001-02-06  Christopher James Lahey  <clahey@ximian.com>

    * gui/widgets/Makefile.am (INCLUDES): Added
    -DEVOLUTION_DATADIR=\""$(datadir)"\".

    * gui/widgets/e-addressbook-view.c
    (e_addressbook_view_setup_menus): Changed the local and system
    directories.

2001-02-06  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (create_card_handler): doh,
    didn't mean to commit this.
    
2001-02-06  Chris Toshok  <toshok@ximian.com>

    * backend/pas/evolveperson.schema: new file.  this will eventually
    form the suggested additions to an existing openldap server that,
    along with support for inetorgperson, will allow people to store
    all evolution attributes in ldap.
    
2001-02-06  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_init): don't
    need the = NULL's since we g_new0.
    (check_for_evolve_person): new function.
    (pas_backend_ldap_connect): check to see if the evolvePerson
    objectclass is there.
    (build_mods_from_ecards): right now, just silently skip the extra
    attributes if we don't support evolvePerson.
    (add_objectclass_mod): new function, add both inetOrgPerson and
    (if it's available) evolvePerson as objectclasses.
    (pas_backend_ldap_process_authenticate_user): also check to see if
    evolvePerson is there, if we couldn't do it (due to auth reasons)
    in the connect method.
    (prop_info): change the telephoneNumber LDAP attribute to be used
    for evolution's business phone numbers.  the primary phone number
    will be a single valued attribute on evolvePerson.
    (business_populate): new function.
    (business_ber): new function.
    (business_compare): new function.

2001-02-05  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (create_card_handler): err,
    allocate 2 char*s when i assign 2 char*s.

2001-02-05  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (modify_card_handler): switch to
    ldap_modify_ext_s if OPENLDAP2, as ldap_modify_s is deprecated.
    (build_mods_from_ecards): don't include the mod if the value is ""
    - this isn't valid on schema checking ldap servers.
    (homephone_populate): new function.
    (homephone_ber): new function.
    (homephone_compare): new function.
    (create_card_handler): add spew when adding cards so I can see
    what's going on.
2001-02-05  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook-config.c (table_add_elem): Save the
    help_text in the closure.

2001-02-05  Christopher James Lahey  <clahey@helixcode.com>

    * gui/widgets/Makefile.am (libeminicard_a_SOURCES): Added
    gal-view-factory-minicard.c, gal-view-factory-minicard.h,
    gal-view-minicard.c, and gal-view-minicard.h.

    * gui/widgets/gal-view-factory-minicard.c,
    gui/widgets/gal-view-factory-minicard.h,
    gui/widgets/gal-view-minicard.c, and
    gui/widgets/gal-view-minicard.h: New classes for minicard view
    type.

    * gui/widgets/e-addressbook-view.c: Deploy gal-view stuff
    properly.
    
2001-02-05  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c (e_card_get_vcard): Make the Note field
    be quoted printable.

2001-01-27  Christopher James Lahey  <clahey@helixcode.com>

    * gui/search/e-addressbook-search-dialog.c
    (e_addressbook_search_dialog_init): This should be a close button,
    not a cancel button.

2001-02-04  Christopher James Lahey  <clahey@ximian.com>

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_manager_activate_dialog): Call
    e_select_names_set_default when appropriate.

    * gui/component/select-names/e-select-names.c,
    gui/component/select-names/e-select-names.h: Added support for
    double clicking sending the selected contacts to the default
    section.  Added a set_default function.  Made multiple selection
    work.

2001-01-29  Chris Toshok  <toshok@ximian.com>

    * gui/component/addressbook-config.c
    (addressbook_config_source_label): #ifdef INCLUDE_FILE_SOURCE.
    (table_add_elem): add help_text parameter and set up focus_in
    events to display the help in the dialog's html area.
    (focus_help): new function, calls put_html on the help text.
    (addressbook_ldap_auth_item_new): add help texts.
    (addressbook_source_item_new): add help texts.
    (addressbook_source_dialog): add help texts.

2001-01-27  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/select-names/e-select-names.c
    (e_select_names_add_section): Remove the butt-ugly arrow icon and
    replace it with a less invasive "->" icon.

2001-01-25  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (build_mods_from_ecards): add
    comment about the else block here.
    (prop_info): add home_address, business_address, business_fax,
    assistant, and isdn.

2001-01-25  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c (pas_backend_file_load_uri): Made
    this only add the initial VCard if it finds a file
    "create-initial" in the directory it's creating the database in.

    * gui/component/addressbook-component.c (factory_fn): Added a
    create_folder function.

    * gui/search/e-addressbook-search-dialog.c
    (e_addressbook_search_dialog_init): Fixed an unused variable
    warning.

2001-01-25  Christopher James Lahey  <clahey@helixcode.com>

    * gui/widgets/e-addressbook-view.c
    (e_addressbook_view_setup_menus): Setup the view collection
    properly and handle the "display_view" signal.

2001-01-25  Ettore Perazzoli  <ettore@ximian.com>
    
    * gui/component/addressbook.c (update_pixmaps): Consider the
    placeholder in the path for the "Print" item.

2001-01-25  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook.c (update_pixmaps): Set the icon for
    "/Toolbar/Find" to "24_find_contact.xpm".

2001-01-25  Ettore Perazzoli  <ettore@ximian.com>

    * gui/component/addressbook.c (set_pixmap): New.
    (update_pixmaps): New function, setting the pixmaps for the items
    of type "pixbuf", using `set_pixmap'.
    (control_activate): Call it.

2001-01-25  Not Zed  <NotZed@Ximian.com>

    * backend/pas/pas-backend-ldap.c: esexp api change fixes.

    * backend/pas/pas-backend-file.c (entry_compare): Fix for e_sexp api changes.
    (vcard_matches_search): esexp api fixes.
    (pas_backend_file_search): Ouch, unref the e-sexp properly (not gtk object).

2001-01-24  Chris Toshok  <toshok@ximian.com>

    * backend/pas/pas-backend-ldap.c (email_ber_func): make sure to
    add the lengths here (include the \0?  anyone?).
    (build_mods_from_ecards): if we're filling in mod->mod_bvalues,
    set mod_op |= LDAP_MOD_BVALUES.

2001-01-23  Jason Leach  <jasonleach@usa.net>
    
    (Fix #1225: advanced search cancel/close)
    
    * gui/search/e-addressbook-search-dialog.c
    (e_addressbook_search_dialog_init): Set it up with Search and a
    Cancel button, Search is still the default.

2001-01-23  JP Rosevear  <jpr@ximian.com>

    * conduit/address-conduit.c (local_record_from_ecard): properly ref
    the ecard. still need to kill some memory leaks.

2001-01-22  JP Rosevear  <jpr@ximian.com>

    * conduit/Makefile.am: remove vfs dependency

2001-01-21  JP Rosevear  <jpr@ximian.com>

    * conduit/address-conduit.c (delete_record):  Remove
    deleted records from the pilot map so we don't have dupes in the future
    
2001-01-19  Dan Winship  <danw@ximian.com>

    * gui/widgets/e-addressbook-view.c (table_right_click): 
    * gui/widgets/e-minicard.c (e_minicard_event): Update for
    e_popup_menu_run prototype change.

2001-01-19  Jason Leach  <jasonleach@usa.net>

    (Adding a boolean "entry_changed" BonoboPropertyBag arg)
    
    * gui/component/select-names/e-select-names-bonobo.c
    (entry_set_property_fn): Use a gtk_object_set_data to set the
    property to TRUE here.

    (entry_changed): New function, calls bonobo_control_set_property
    if entry_changed hasn't been set to TRUE yet.
    
    (impl_SelectNames_get_entry_for_section): Connect "changed" on
    each entry_widget to the new entry_changed() func.

2001-01-19  JP Rosevear  <jpr@ximian.com>

    * conduit/address-conduit.c (ecard_from_remote_record): always free 
    the delivery elements and correct embarrassingly stupid memory error 
    that was causing the addressbook conduit problems.

    * backend/ebook/e-book-view-listener.c 
    (e_book_view_listener_check_queue): ref/unref ourself when processing 
    in case someone we signal unrefs us.

    * conduit/address-conduit.c (sequence_complete): disconnect signals
    when complete

2001-01-17  Federico Mena Quintero  <federico@ximian.com>

    * backend/pas/pas-book-factory.c (pas_book_factory_activate): Made
    it return a gboolean; it was completely ignoring the return value
    from register_factory().

2001-01-17  Larry Ewing  <lewing@helixcode.com>

    * backend/ebook/.cvsignore: add evolution-gnomecard-importer.

    * backend/ebook/Makefile.am (oaf_DATA): don't require the pine
    oainfo file until it is actually added to the repository.  We need
    to keep the build working for nightlies to work.

2001-01-16  Jason Leach  <jasonleach@usa.net>

    * backend/pas/pas-backend-file.c (INITIAL_VCARD): s/Helix
    Code/Ximian/ for the initial contact card.

2001-01-15  JP Rosevear  <jpr@ximian.com>

    * conduit/address-conduit.c (print_local): prevent segfaults and 
    buffer overflows
    (print_remote): ditto

2001-01-14  JP Rosevear  <jpr@ximian.com>

    * conduit/Makefile.am: pass -module and -avoid-version to conduit
    linker

2001-01-12  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook-component.c (factory_fn): Pass NULL as
    the @copy_folder_fn arg to `evolution_shell_component_new'.

2001-01-12  Miguel de Icaza  <miguel@ximian.com>

    * gui/widgets/e-addressbook-view.c: added i18n for etable.

2001-01-11  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_process_create_card): get a book view from
    somewhere so we can give status messages - choose the first one in
    the list.
    (pas_backend_ldap_process_modify_card): same.
    (pas_backend_ldap_process_remove_card): same.
    (prop_info): add more properties, like home_phone, mobile, pager,
    uri, org_unit, office, title, and manager.

2001-01-09  Miguel de Icaza  <miguel@gnu.org>

    * gui/widgets/Makefile.am (minicard_widget_test_LDADD): Put GNOME
    libraries at the end to make the thing compile.

    * printing/Makefile.am: Order LDADD flags correctly so it compiles.

2001-01-09  Chris Toshok  <toshok@helixcode.com>

    * gui/component/addressbook.c (addressbook_factory_new_control):
    connect with the EAddressbookView's status_message signal.
    (set_status_message): set the status message on the ShellView
    Interface associated with our control.
    (retrieve_shell_view_interface_from_control): new function.  get
    the shell view inteface associated with a control.

    * gui/widgets/e-addressbook-view.c
    (e_addressbook_view_class_init): register status_message signal.
    (status_message): new function, emit our status_message signal.
    (change_view_type): connect with the view->object's
    "status_message" signal.

    * gui/widgets/e-addressbook-view.h (struct
    _EAddressbookViewClass): add status_message signal.

2001-01-09  Chris Toshok  <toshok@helixcode.com>

    * gui/widgets/e-minicard-view-widget.c
    (e_minicard_view_widget_class_init): register our status_message
    signal.
    (status_message): new function, emit our status_message signal.
    (e_minicard_view_widget_realize): connect to the EMinicardView's
    status_message signal.

    * gui/widgets/e-minicard-view-widget.h: add status_message signal.

    * gui/widgets/e-minicard-view.c (e_minicard_view_class_init):
    register our status_message signal.
    (e_minicard_view_init): init status_message_id.
    (status_message): new function, emit our status_message signal.
    (book_view_loaded): connect to the EBookView's status_message
    signal.
    (disconnect_signals): disconnect status_message_id.

    * gui/widgets/e-minicard-view.h: add status_mesage_id, and
    status_message signal.

    * gui/widgets/e-addressbook-model.c (status_message): new
    function, emit our status_message.
    (e_addressbook_model_class_init): register our "status_message"
    signal.
    (book_view_loaded): connect to the EBookView's status_message
    signal, so we can chain it to our parent.
    (e_addressbook_model_init): init status_message_id.
    (remove_book_view): disconnect status_message_id.

    * gui/widgets/e-addressbook-model.h: add status_message_id, and
    status_message signal.

    * backend/pas/pas-backend-ldap.c change the objectclass we create
    objects with to "inetOrgPerson" as it encompasses the fields we
    use.
    (create_dn_from_ecard): remove the mail/org handling from
    here.  we just prepend cn=$cn onto the base dn.
    (create_card_handler): remove the NULL that build_mods_from_ecards
    adds at the end, and insert our objectClass.
    (modify_card_handler): call search_for_dn to get the ECardSimple
    of the old card, since it might (and does in the current code)
    doing a brute force search.
    (search_for_dn): new function, to search for an entry by its dn.
    right now we brute force (objectclass=*) under the base dn and
    compare dn's.  going to add a first pass that explodes the dn and
    searches that way, using (objectclass=*) as a last resort.  also,
    here's where we'd put the extensibleMatch code if we want to go
    that route.

    * backend/ebook/e-card.c (e_card_set_arg): if we're setting the
    full name regenerate ecard->name.

2001-01-04  Chris Toshok  <toshok@helixcode.com>

    * backend/ebook/e-book-listener.c
    (e_book_listener_queue_authentication_response): new function.
    (impl_BookListener_respond_authentication_result): new function.
    (e_book_listener_get_epv): fill in
    epv->notifyAuthenticationResult.

    * backend/ebook/e-book-listener.h: add AuthenticationResponse to
    EBookListenerOperation.

    * backend/ebook/e-book.c (e_book_authenticate_user): new function.

    * backend/ebook/e-book.h: add prototype for
    e_book_authenticate_user.

    * backend/idl/addressbook.idl (GNOME:Evolution:Addressbook:Book):
    add authenticateUser method.
    (GNOME:Evolution:Addressbook:BookListener): add
    AuthenticationFailed and AuthenticationRequired to CallStatus.
    also add notifyAuthenticationResult method.

    * backend/pas/pas-backend-file.c
    (pas_backend_file_process_authenticate_user): dummy
    authenticate_user function that always succeeds.
    (pas_backend_file_process_client_requests): respond to the
    AuthenticateUser request.

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_build_query):
    gtk_object_unref(sexp) => s_exp_unref(sexp).
    (pas_backend_ldap_process_authenticate_user): fill in to use
    ldap_simple_bind_s.
    (pas_backend_ldap_process_client_requests): respond to the
    AuthenticateUser request.

    * backend/pas/pas-book.c (pas_book_queue_authenticate_user): new
    function.
    (impl_GNOME_Evolution_Addressbook_Book_authenticateUser): new
    function.
    (pas_book_respond_authenticate_user): new function.
    (pas_book_get_epv): fill in epv->authenticateUser.

    * backend/pas/pas-book.h: add AuthenticateUser operation type, and
    add user/passwd to the PASRequest struct.

    * gui/component/addressbook-storage.c
    (addressbook_storage_get_source_by_uri): new function.  should use
    a hashtable, perhaps, but the lists will generally be small
    anyway.

    * gui/component/addressbook-storage.h: add prototype for
    addressbook_storage_get_source_by_uri.

    * gui/component/addressbook-config.c
    (addressbook_source_dialog_set_source): fill in the binddn if the
    auth page is shown.

    * gui/component/addressbook.c (book_open_cb): shoe-horn
    authentication in here.  if the source was configured to use
    authentication, authenticate the user after opening the ebook.
    also, be paranoid and clear out the password after authenticating.
    (book_auth_cb): callback for auth.  set the "book" arg on the
    view->view here.
    (passwd_cb): set the view's passwd that'll be used in
    book_open_cb.
    (addressbook_view_free): g_free view->passwd.

2001-01-04  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook-component.c,
    gui/component/addressbook-component.h
    (addressbook_component_get_shell_client): Added this function.

    * gui/component/select-names/e-select-names.c,
    gui/component/select-names/e-select-names.h: Added code for the
    ability to switch between different folders.  This doesn't work
    yet.

    * gui/component/select-names/select-names.glade,
    gui/component/select-names/select-names.glade.h: Added an option
    menu to this dialog.

2001-01-04  JP Rosevear  <jpr@helixcode.com>

    * conduit/Makefile.am: Fix hard coded library names that were 
    accidentally committed (i'm looking at you miggie)

    * contact-editor/e-contact-editor.c (categories_clicked): Reflect
    renaming.

    * contact-editor/e-contact-editor-categories.[hc]: These are
    living in gal now
    
2001-01-04  JP Rosevear  <jpr@helixcode.com>

    * backend/pas/pas-backend-file.c (pas_backend_file_book_view_free): 
    Need to e_sexp_unref the the sexp, not gtk_object_unref it.

2001-01-03  Michael Meeks  <michael@helixcode.com>

    * gui/widgets/e-addressbook-model.c (get_view): check
    capabilities is valid before doing a strstr.

2001-01-03  Michael Meeks  <michael@helixcode.com>

    * backend/pas/pas-backend-file.c (pas_backend_file_search):
    g_strdup things we g_free.

2001-01-02  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c (delete_cb): Make sure this
    won't crash if the given contact is removed from the database
    while this function is being called.

    * gui/widgets/e-minicard.c: Made sure this won't crash if the
    given contact is removed from the database while the right click
    menu is being displayed.

2000-12-30  Chris Toshok  <toshok@helixcode.com>

    * gui/component/addressbook-config.c (edit_source_clicked): copy
    the dialog's source, destroy the dialog after we're done, and make
    sure to update both columns in the clist.
    (add_source_clicked): copy the dialog's source, and destroy the
    dialog when we're done.
    (addressbook_source_dialog_destroy): free up all the dialog's
    memory.

    * gui/component/addressbook.c (set_prop): allow file: uri's that
    point to files, not just dirs that contain addressbook.db.  The
    rule is the addressbook file has to end in .db.

    * gui/component/addressbook-storage.c (file_source_foreach):
    contactserver => contactfile.  cut and paste error.
    (addressbook_storage_init_source_uri): use file://%s to build the
    uri.

    * gui/component/e-ldap-server-dialog.[ch]: forgot to remove these
    in my last commit.

2000-12-29  Chris Toshok  <toshok@helixcode.com>

    * gui/component/addressbook.c (config_cb): new function, calling
    our new config ui code.
    (control_activate): no longer load evolution-addressbook-ldap.xml,
    as it's not there.

    * gui/component/addressbook-component.c (owner_set_cb):
    setup_ldap_storage => addressbook_storage_setup.

    * gui/component/Makefile.am (evolution_addressbook_SOURCES):
    remove e-ldap-storage.[ch] and add addressbook-storage.[ch].
    (glade_DATA): remove ldap-server-dialog.glade and add
    addressbook-config.glade.
    (EXTRA_DIST): same.

    * gui/component/addressbook-config.[ch]: add another dialog to
    give a list of our sources and offer the Add/Delete/Edit
    interface.  This plugs into the previous dialog work (the source
    editor.)

    * gui/component/addressbook-storage.[ch]: new files, containing
    the remains of e-ldap-storage.[ch] and adding the new
    AddressbookSource type and it's subordinates.  Also, the xml
    format has changed slightly and the file name is no longer
    ~/evolution/ldap-servers.xml - it's
    ~/evolution/addressbook-sources.xml.

    * gui/component/addressbook-config.glade: new file, new config
    interface.

    * gui/component/ldap-server-dialog.glade: removed.

    * gui/component/e-ldap-storage.[ch]: removed.

2000-12-28  Chris Toshok  <toshok@helixcode.com>

    * gui/component/Makefile.am (evolution_addressbook_SOURCES): add
    addressbook-config.[ch].

    * gui/component/addressbook-config.c,
    gui/component/addressbook-config.h: new files, containing at the
    moment a beautiful "new/edit source dialog" inspired by the
    mail-config-gui code.  It'll be ready for prime time after rev'ing
    the .xml file the addressbook uses to store it's "other sources"
    to include files, and the addition of the ldap auth stuff.

2000-12-25  Miguel de Icaza  <miguel@helixcode.com>

    * gui/widgets/e-minicard.c (e_minicard_realize): Set draw
    background to FALSE.
    
    * gui/widgets/e-minicard-label.c (e_minicard_label_construct): ditto.
    (e_minicard_label_construct): ditto

2000-12-23  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/fullname-strings.h,
    contact-editor/fullname.glade: Added Ms. and Miss to the prefix
    drop down box.  Patch submitted by Martin Hicks <mort@bork.org>.

2000-12-21  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.c (cursor_cb): Ref the cards that get put
    in the change list
    (next_changed_item): util function to get the real next changed item
    (compute_status): really compute the status of the record
    (local_record_from_uid): Set the id of the temporary card
    (check_for_slow_setting): Make this check a little saner
    (card_added): Only record the CardObjectChange if the card is not
    archived
    (card_changed): ditto
    (card_removed): ditto
    (set_status_cleared): actually clear the status
    (for_each_modified): Clean out cruft and use next_changed_item
    (add_record): Set the new id properly in our local card copy
    (replace_record): handle the case where the record has been deleted
    and we need to call add.  need to update the changed_hash entry
    (delete_record): Don't panic if the card is not found, its already
    been deleted.

    * backend/pas/pas-backend-file.c (pas_backend_file_book_view_copy): 
    The change_context no longer has a del_cards member
    (pas_backend_file_book_view_free): ditto
    (pas_backend_file_process_get_changes): ditto
    (pas_backend_file_changes_foreach_key): just record the id
    (pas_backend_file_changes): notify_remove needs an id not a vcard

2000-12-20  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.c (match): Use my own wrapper
    functions instead of trying to *directly* access the the data 
    structures my self
    (post_sync): Put in hack to prevent syncing the same records twice
    (local_record_from_uid): set the card id when creating a blank one
    (add_record): Set the id of the card we have and don't go to the
    server to get the latest version

2000-12-19  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.c (ecard_from_remote_record): Convert
    pilot strings to utf for the e-cards.
    
2000-12-19  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.c (local_record_from_ecard): Convert ecard
    strings to pilot encodings

2000-12-19  Christopher James Lahey  <clahey@helixcode.com>

    * gui/widgets/e-addressbook-view.c (delete): Made it so that if
    you select multiple contacts, the right click menu to delete
    deletes them all.

2000-12-18  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c (ldap_error_to_response): always
    use LDAP_NAME_ERROR (in the openldap1 case it's #defined to
    NAME_ERROR).
    (build_card_from_entry): ldap_get_values can return NULL.  also,
    openldap2 keeps us from getting at ldap->ld_errno, so we can't
    tell if there was a decoding error like we used to.  the double
    free problem where ldap would free the ber if there was a decoding
    problem might be fixed now..  further investigation is needed.
    for now we leak in openldap2.
    (ldap_search_handler): the ldap structure is opaque, so use
    ldap_search_ext to give the extra information (the max responses,
    timeout, etc.) in the openldap2 case.

2000-12-13  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-ldap.c (ldap_error_to_response): Test
    for the existance of LDAP_NAME_ERROR and if it exists as a macro,
    use it instead of NAME_ERROR.

2000-12-14  Michael Meeks  <michael@helixcode.com>

    * gui/component/GNOME_Evolution_Addressbook.oafinfo: update cut
    and paste description error.

2000-12-13  Dan Winship  <danw@helixcode.com>

    * gui/widgets/e-minicard-control.c (stream_read): NULL-terminate
    the returned vcard so we don't sometimes end up with trailing
    junk that makes libversit unhappy.

2000-12-13  Iain Holmes  <iain@helixcode.com>

    * gui/component/select-names/e-select-names.c 
    (e_select_names_add_section): Make the -> into a GNOME stock image.

2000-12-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/e-select-names.c
    (e_select_names_init): Connect to the "cursor_change" signal on
    the ETable here instead of the ETableScrolled.
    (remove_address): Added the col and event parameters to this
    callback to match the added parameters to the double click signal.
    (e_select_names_add_section): Connect to the "double_click" signal
    on the ETable here instead of the ETableScrolled.

2000-12-09  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c (e_card_set_arg): When setting the "name"
    argument, copy the incoming name.  This fixes a crash.

2000-12-09  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Made editing the name using
    the full name button set the file as entry properly.  Made it
    so that the address parse that the user chooses after
    clicking on the Full Address... button gets saved.

2000-12-08  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c (full_name_clicked): Made it
    so that the editor->name is set after the entry is changed.  This
    means that the reparse that the person chose is saved.

2000-12-07  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/e-ldap-storage.c (setup_ldap_storage): Pass NULL
    as the @toplevel_node_handler_id argument to
    `evolution_storage_new'.

2000-12-08  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Fixed some formatting.

    * contact-editor/e-contact-editor-categories.h: Removed an
    unneeded #include.

    * gui/widgets/e-addressbook-view.c: Connect to the signals on the
    ETable instead of the ETableScrolled.

2000-12-07  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.c (local_record_from_uid): Pass "" rather
    than NULL to e_card_new.
    (local_record_from_ecard): Make sure ecard->name is valid
    (check_for_slow_setting): Remove hard coded test value
    (card_added): g_strdup the resul of e_card_get_id
    (card_changed): ditto

2000-12-07  Christopher James Lahey  <clahey@helixcode.com>

    * gui/widgets/e-addressbook-view.c: Got rid of code referencing
    the ETableScrolled proxy functions.

2000-12-06  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Moved the gal view menu stuff from
    here to EAddressbookView.

    * gui/widgets/e-addressbook-view.c,
    gui/widgets/e-addressbook-view.h: New function to set up the menus
    for the EAddressbookView.

2000-12-06  JP Rosevear  <jpr@helixcode.com>

    * conduit/Makefile.am: Another conduit build fix

2000-12-05  JP Rosevear  <jpr@helixcode.com>

    * backend/pas/pas-backend-file.c (pas_backend_file_changes_foreach_key): 
    Create an empty vcard with the appropriate id for deleted cards

    * conduit/address-conduit.c (ecard_from_remote_record): Ensure the
    address fields are added sensibly

2000-12-05  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/e-ldap-storage.c (setup_ldap_storage): Updated the
    call to `evolution_storage_new()': pass NULL for
    @toplevel_node_uri.

2000-11-28  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.c (local_record_to_pilot_record): Return
    a struct rather than a pointer to a struct
    (view_cb): kill warning
    (compare): local_record_to_pilot_record now returns a struct
    (prepare): ditto
    (free_prepare): remove as per gnome-pilot changes
    (conduit_get_gpilot_conduit): don't listen for free_prepare signal

2000-11-27  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.h: Remove "complete" field

    * conduit/address-conduit.c (print_local): Make it print useful debug
    info
    (print_remote): ditto
    (local_record_from_ecard): Make sure phone numbers get out to the pilot
    (ecard_from_remote_record): Set phone strings to "" if they are null
    (sequence_complete): unref the book view
    (view_cb): ref the book view
    (free_prepare): do nothing

    * backend/pas/pas-backend-file.c (pas_backend_file_book_view_free): 
    Destroy the card lists with the rest of the view.
    (pas_backend_file_changes): Don't destroy the card lists here
    (pas_backend_file_book_view_free): Free the card/id lists in the
    change context here, the correct place.
    (pas_backend_file_changes): instead of here...

2000-11-22  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c: Set view.change_context to NULL
    in pas_backend_file_process_get_book_view.  Changed
    pas_backend_file_book_view_copy a bit.

    * backend/pas/pas-backend-ldap.c: Got rid of a warning.

2000-11-18  Matt Bissiri  <matt@bissiri.org>

    * gui/component/Makefile.am:
    Add widgets/menus/libmenus.la to evolution_addressbook_LDADD
    so that it will link properly now that gal-view-menus.[ch]
    was moved from gal into evolution.

2000-11-15  JP Rosevear  <jpr@helixcode.com>

    * backend/pas/pas-backend-file.c (pas_backend_file_book_view_copy): 
    Initialize destination struct with '0's.

2000-11-12  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Changed the mime type from "text/vcard"
    to "text/x-vcard".

2000-11-11  Matt Bissiri  <bissiri@eecs.umich.edu>

    * backend/ebook/.cvsignore: Add idl-generated files.
    * backend/ebook/e-book.c: (e_book_do_response_get_changes):
    * backend/ebook/e-card.c: (e_card_send):
    s/Evolution_/GNOME_Evolution_/g;

2000-11-11  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am: Link in composer bonobo code.

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added code to
    send mail to an ECard or send an ECard as a VCard attachment.

    * contact-editor/e-contact-editor.c: Add verbs to send the contact
    as a VCard or send mail to the contact.

    * gui/search/e-addressbook-search-dialog.c: Removed some unused
    variables.

    * gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard.c:
    Added menu items to send the contact as a VCard or send mail to
    the contact.

2000-11-11  Matt Bissiri  <bissiri@eecs.umich.edu>

    * gui/component/addressbook.oafinfo:
    * gui/component/select-names/evolution-addressbook-select-names.oafinfo:
    Update the remaining "IDL:Evolution*" to "IDL:GNOME/Evolution*"
    to sync up with yesterday's IDL re-scoping.

2000-11-09  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-ldap.c: Fixed a warning.

    * gui/component/addressbook.c: Put in gal view menus for testing
    purposes.

    * printing/e-contact-print-envelope.c: Fixed up envelope printing
    a bit.  Added code for printing return addresses.

2000-11-09  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.h: Add changed_hash, change list and complete bool

    * conduit/address-conduit.c (local_record_from_ecard): Add empty field checks
    (card_added): callback for book view
    (card_changed): ditto
    (card_removed): ditto
    (sequence_complete): ditto
    (view_cb): callback for the get changes call
    (pre_sync): force synchronous loading of book view
    (for_each): we already have the card so create the local record directly
    (for_each_modified): Uncomment and fix
    (delete_record): ditto

    * conduit/Makefile.am: link against gal for ebook - needs fixing

    * backend/ebook/e-book.c (e_book_do_response_get_changes): Properly respond
    to a get_changes call
    (e_book_check_listener_queue): define the get changes response operation

    * backend/ebook/e-book-listener.c (e_book_listener_queue_get_changes_response):
    Queue up a get changes response
    (impl_BookListener_respond_get_changes): Implement the get_changes method
    (e_book_listener_get_epv): add get_changes implementation to epv

    * backend/pas/pas-backend-file.c (pas_backend_file_book_view_copy): Only
    copy the search_context and change_context elements if they actually exist
    (pas_backend_file_changes): Hard code a path for now, only notify if
    there is something to notify about

2000-11-07  JP Rosevear  <jpr@helixcode.com>

    * backend/pas/pas-book.h: Update PASRequest structure

    * backend/pas/pas-book.c (impl_Evolution_Book_get_changes): update param name
    (pas_book_queue_get_changes): Use PASRequest change_id slot

    * backend/pas/pas-backend-file.c (pas_backend_file_book_view_copy): 
    Properly copy change_id and change_context
    (pas_backend_file_book_view_free): Free change_id/change_context
    (pas_backend_file_changes_foreach_key): Callback to figure out the
    deleted cards
    (pas_backend_file_changes): Use new e-dbhash stuff to implement.
    Write out updated hash

    * backend/idl/addressbook.idl: Rename get_changes param

2000-11-06  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Switched from EAddressbookSearch to
    ESearchBar.

    * gui/widgets/Makefile.am, gui/widgets/e-addressbook-search.c,
    gui/widgets/e-addressbook-search.h: Removed EAddressbookSearch.
    This has been moved to filter/ and renamed ESearchBar.

    * printing/e-contact-print-envelope.c: Forgot to set the font.
    This works for me now.

2000-11-06  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/select-names/e-select-names-bonobo.c
    (impl_SelectNames_get_entry_for_section): Duplicate the object
    reference before returning.

2000-11-05  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c,
    gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard.c: Add
    menus items to the envelope printing stuff.

    * gui/component/addressbook.c: Hook up the search menu.

    * gui/widgets/e-addressbook-search.c,
    gui/widgets/e-addressbook-search.h: Add the search menu.

    * printing/Makefile.am: Add e-contact-print-envelope.c and
    e-contact-print-envelope.h.

    * printing/e-contact-print-envelope.c,
    printing/e-contact-print-envelope.h: Added envelope printing.

2000-11-03  Federico Mena Quintero  <federico@helixcode.com>

    * gui/component/select-names/Makefile.am: Clean the idl-generated
    files properly.

2000-11-02  Christopher James Lahey  <clahey@helixcode.com>

    * ename/.cvsignore, gui/minicard/.cvsignore: Removed these
    unnecessary .cvsignores.

    * gui/component/addressbook.c: Switch to using EAddressbookSearch
    instead of custom quick search widget.

    * gui/component/select-names/e-select-names.c: Made this do a
    slightly better job of rendering names.

    * gui/widgets/Makefile.am: Added e-addressbook-search.c and
    e-addressbook-search.h.

    * gui/widgets/e-addressbook-search.c,
    gui/widgets/e-addressbook-search.h: New class that puts up an
    entry and a combo box.

2000-11-01  Dan Winship  <danw@helixcode.com>

    * gui/component/e-ldap-storage.c (load_ldap_data): 
    (e_ldap_storage_add_server): Add "highlighted" flag to
    evolution_storage_new_folder

2000-10-31  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.c (cursor_cb): Let the warning make sense
    (compute_pid): remove
    (local_record_from_ecard): Create local record from ecard - not finished
    (local_record_from_uid): Obtain local_record from uid with the proper
    e-book way
    (set_status_cleared): Add empty callback
    (add_archive_record): kill
    (delete_archive_record): kill
    (archive_record): Add empty callback
    (conduit_get_gpilot_conduit): Update signal connects

    * backend/pas/pas-backend-file.c (vcard_change_type): Function to determine
    the type of change - not finished
    (pas_backend_file_search_changes): Create a view and callback based on 
    how the cards have changed
    (pas_backend_file_process_get_changes): Implement the get changes operation
    for files
    (pas_backend_file_process_client_requests): Add GetChanges method for
    processing

    * backend/pas/pas-book.c (pas_book_queue_get_changes): Add changes to
    the list
    (impl_Evolution_Book_get_changes): implement object method
    (pas_book_get_epv): Add get changes to epv
    (pas_book_respond_get_changes): Respond to the get changes operation

    * backend/pas/pas-book.h: Add GetChanges PASOperation

    * backend/idl/addressbook.idl: add get_changes and respond_get_changes
    methods

    * backend/ebook/e-book.c (e_book_get_changes): Client function
    to a view of the changed objects

    * backend/ebook/e-book.h: New prototype

2000-10-30  Kjartan Maraas  <kmaraas@gnome.org>

    * backend/e-book/e-card.c: Fixed marking of strings
    for translation. Use "_(" instead of "_ (".
    * gui/component/addressbook-factory.c: Add missing
    calls to bindtextdomain() and textdomain noticed by
    Dan Winship.
    * gui/component/addressbook.c: Marked string for translation.
    
2000-10-27  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/Makefile.am, gui/search/Makefile.am,
    printing/Makefile.am: Fixed these to include EXTRA_GNOME_CFLAGS.

    * gui/component/select-names/e-select-names-manager.c: Turned off
    newlines in header fields.

2000-10-26  Michael Meeks  <michael@helixcode.com>

    * printing/e-contact-print.c (e_contact_print_letter_tab),
    (complete_sequence, e_contact_do_print_phone_list, lowify):
    unsigned charness.

2000-10-25  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c (ldap_op_process_current): only
    call the handler if the if we're connected, and if we fail to
    connect finish the op and post a message.
    (pas_backend_ldap_connect): add debug spew if DEBUG is defined.
    (modify_card_handler): LDAP_RES_SEARCH_ENTRY => LDAP_SUCCESS.
    (modify_card_handler): only perform the ldap_modify_s if we have a
    list of modifications.
    (get_cursor_handler): use ldap_error_to_response here.
    (pas_backend_ldap_load_uri): use LDAP_PORT instead of the constant
    389.

2000-10-23  Dan Winship  <danw@helixcode.com>

    * gui/component/select-names/Makefile.am (INCLUDES): 
    * gui/component/Makefile.am (INCLUDES): Update EVOLUTION_LOCALEDIR

    * backend/pas/Makefile.am (INCLUDES): 
    * backend/ebook/Makefile.am (INCLUDES): Update GNOMELOCALEDIR.

2000-10-23  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.h: Use new libeconduit calls and
    abstraction

    * conduit/address-conduit.c: ditto
    
2000-10-23  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.c (pre_sync): Use e_pilot_map_read
    (post_sync): Use e_pilot_map_write

    * conduit/Makefile.am: Link libeconduit and not libical

2000-10-20  Michael Meeks  <michael@helixcode.com>

    * contact-editor/e-contact-editor.c (tb_save_and_close_cb): 

    * gui/component/addressbook.c (toggle_view_as_cb): 

2000-10-20  JP Rosevear  <jpr@helixcode.com>

    * conduit/address-conduit.h: New structure of file - similar
    to calendar/todo conduits

    * conduit/address-conduit.c: ditto

    * conduit/address-conduit-config.h: Config stuff for conduit

    * conduit/.cvsignore: Update

    * conduit/Makefile.am: Build fixes

    * conduit/address-conduit-control-applet.desktop: Renamed
    to e-address-conduit-control-applet.desktop

    * conduit/address.conduit.in: Renamed to e-address.conduit.in

2000-10-19  Christopher James Lahey  <clahey@helixcode.com>

    * gui/widgets/e-addressbook-view.c (SPEC): Remove Family name
    column since it's a bit weird.  This also fixes the initial state
    since all of the column choices were off by one.

2000-10-19  Ettore Perazzoli  <ettore@helixcode.com>

    * printing/Makefile.am (glade_DATA): Remove
    `e-contact-print.glade.h'.
    (EXTRA_DIST): Move here.

    * gui/component/Makefile.am (glade_DATA): Remove
    `ldap-server-dialog.glade.h'.
    (EXTRA_DIST): Move here.

2000-10-19  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Change how the extension field acts when
    converting delivery addresses to labels.

2000-10-18  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added the
    function e_card_delivery_address_to_label.

    * contact-editor/e-contact-editor-address.c: Fixed a potential
    crash.

    * contact-editor/e-contact-editor.c: Made this save the changed
    data to the string version of the address.

2000-10-19  Michael Meeks  <michael@helixcode.com>

    * gui/component/addressbook.c (change_view_type): update to new
    UI handler.
    (update_view_type): split from (change_view_type).
    (control_activate): add an update_view_type.

2000-10-18  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c: Change NAME_OR_ORG to return the
    email address if both name and organization are taken.

    * gui/component/select-names/e-select-names.c: Fixed up the spec
    strings in this class.  Removed the "cursor_mode" argument to
    ETable since it's part of the spec now.

2000-10-17  Iain Holmes  <iain@helixcode.com>

    * contact-editor/contact-editor.glade: Change the initial dialog 
    visibility to FALSE
    so the contact editor doesn't flash when it appears.

2000-10-16  Iain Holmes  <iain@helixcode.com>

    * gui/component/select-names/e-select-names-manager.c 
    (e_select_names_manager_activate_dialog): Only allow one dialog
    per manager.

2000-10-16  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/fulladdr.glade: Fixed a typo.  Made this look a
    bit better.

2000-10-15  Dan Winship  <danw@helixcode.com>

    * gui/component/select-names/Makefile.am:
    * gui/component/Makefile.am: Remove CPPFLAGS since they just
    duplicate flags that were already in INCLUDES.

    * printing/Makefile.am (ecpsdir): 
    * gui/widgets/Makefile.am:
    * contact-editor/Makefile.am: Move -D flags from CPPFLAGS to
    INCLUDES so they don't override any CPPFLAGS set at configure
    time.

2000-10-14  Michael Meeks  <michael@helixcode.com>

    * gui/component/addressbook.c (control_activate): if we are in
    LDAP mode then merge in the extra few items, otherwise just merge
    the standard thing; saves duplication.

2000-10-14  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook.oafinfo: Added
    "evolution:shell-component-icon" property.

2000-10-14  Iain Holmes  <iain@helixcode.com>

    * gui/component/select-names/e-select-names.c 
    (e_select_names_manager_activate_dialog): Only allow one dialog
    per id.
    (e_select_names_manager_destroy): Destroy the hashtable.
    (e_select_names_manager_init): Init the hashtable.

2000-10-13  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/fulladdr.glade, contact-editor/fulladdr.glade.h:
    Rearranged these fields a bit more.

2000-10-13  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c,
    gui/component/select-names/e-select-names.c,
    gui/widgets/e-addressbook-view.c: Changed these for boolean
    ascending attribute instead of int ascending attribute.  Fixed
    e-select-names to not use a column past the end of its array.

    * contact-editor/e-contact-editor-address.c,
    contact-editor/fulladdr.glade, contact-editor/fulladdr.glade.h:
    Rearranged the address editor dialog.

2000-10-11  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c: Fixed the column
    elements, the no-headers attribute and added a cursor-mode=line
    attribute.

    * gui/component/select-names/e-select-names.c,
    gui/widgets/e-addressbook-view.c: Fixed the column elements here.

2000-10-11  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c,
    gui/component/select-names/e-select-names.c,
    gui/widgets/e-addressbook-view.c: Updated these to the new style
    ETables.

2000-10-06  Not Zed  <NotZed@HelixCode.com>

    * gui/search/e-addressbook-search-dialog.c (get_widget): Removed
    ondemand callback nonsense from rule_context_load().

2000-10-05  Michael Meeks  <michael@helixcode.com>

    * contact-editor/e-contact-editor.c (create_ui): upd.
    (e_contact_editor_init): upd.

    * gui/component/addressbook.c (control_activate_cb): upd.
    (control_deactivate): kill.
    (control_activate): upd.

2000-09-22  Michael Meeks  <michael@helixcode.com>

    * gui/component/addressbook.c (control_activate): update.

    * contact-editor/e-contact-editor.c (create_ui): upd.

Fri Sep 29 07:33:54 2000  Christopher James Lahey  <clahey@helixcode.com>

    * gui/widgets/e-minicard.c, gui/widgets/e-minicard.h: Made it so
    that minicard doesn't write out changes to the backend unless
    something's actually changed.

Tue Sep 26 16:28:47 2000  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Make sure that card->name and
    card->full_name are always valid.

    * contact-editor/e-contact-editor.c: Removed some unused
    variables.

2000-09-22  Matt Bissiri  <bissiri@eecs.umich.edu>

    * contact-editor/e-contact-editor-fullname.c (extract_info): If
    (editor->name == NULL), store ptr to newly allocated ECardName in
    editor->name, not just in a stack variable.  This fixes a crash
    which happened when you click "New", then click "Full Name...",
    then enter name, then click "OK".

    * backend/ebook/e-card.c (e_card_name_to_string): Add
    g_return_val_if_fail.

2000-09-25  Jeffrey Stedfast  <fejj@helixcode.com>

    * gui/widgets/Makefile.am:
    * gui/component/Makefile.am:
    * contact-editor/Makefile.am:
    * printing/Makefile.am: Look for ename in /e-util/ename instead of
    /addressbook/ename
    
    * backend/ebook/e-card.c: Updated to include e-util/ename/*.h

    * ename: Moved to /e-util so it could be shared

    * Makefile.am (SUBDIRS): took out ename

2000-09-25  Nat Friedman  <nat@helixcode.com>

    * ename/e-name-western-tables.h: Added a ton of new prefixes and
    suffixes.

2000-09-22  Michael Meeks  <michael@helixcode.com>

    * gui/component/addressbook.c (control_activate): update.

    * contact-editor/e-contact-editor.c (create_ui): upd.

2000-09-22  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c: lots of changes.  flesh out the
    remove/modify/create functions.  add another flag for the property
    table, PROP_DN, which makes it easy for us to determine when we
    need to create a new DN for a record when we're modifying.  also
    add a ber_func to the table for PROP_TYPE_LIST fields, which fills
    in the list of bvalues that we send to the ldap server.  The
    add/modify/delete stuff hasn't been tested yet, and it hopelessly
    complex (yay ldap).
    (ldap_search_handler): act synchronous when ldap_search responds
    with -1.
    (view_destroy): use pas_book_view_notify_status_message.
    (ldap_op_process_current): same
    (ldap_op_process): same
    (poll_ldap): same
    (ldap_search_handler): same

2000-09-22  Chris Toshok  <toshok@helixcode.com>

    * backend/ebook/e-card-simple.h: add
    E_CARD_SIMPLE_FIELD_FAMILY_NAME to the enum.

    * backend/ebook/e-card-simple.c (field_data): add
    E_CARD_SIMPLE_FIELD_FAMILY_NAME.
    (e_card_simple_get): add getter for FAMILY_NAME.

2000-09-22  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Made addresses be quoted printable again
    so that they will encode properly if they have carriage returns in
    them.  This is possible now because of a fix in libversit.

2000-09-22  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-book-view-listener.c,
    backend/ebook/e-book-view-listener.h, backend/ebook/e-book-view.c,
    backend/ebook/e-book-view.h, backend/idl/addressbook.idl,
    backend/pas/pas-book-view.c, backend/pas/pas-book-view.h: Added a
    function to set the status message associated with a given view.
    This is not yet implemented in the gui.

2000-09-22  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-book.c, backend/ebook/e-book.h,
    backend/idl/addressbook.idl, backend/pas/pas-backend-file.c,
    backend/pas/pas-backend-ldap.c, backend/pas-backend.c,
    backend/pas/pas-backend.h, backend/pas/pas-book.c,
    backend/pas/pas-book.h: Added a function to query static
    capabilities (capabilities that can be reported immediately) and
    implemented them in the 2 servers.

    * gui/component/addressbook.c: Added a View All button and a Stop
    button.  Sorted out the new directory server stuff a bit.

    * gui/widgets/e-addressbook-model.c,
    gui/widgets/e-addressbook-model.h: Cleaned up a bit.  Added a stop
    function.  Check for capabilities before deciding whether to load
    all cards when initially viewed.

    * gui/widgets/e-addressbook-view.c,
    gui/widgets/e-addressbook-view.h: Added stop and view all
    functions.

    * gui/widgets/e-minicard-view-widget.c,
    gui/widgets/e-minicard-view-widget.h,
    gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h:
    Added a stop function.  Check for capabilities before deciding
    whether to load all cards when initially viewed.

2000-09-21  Michael Meeks  <michael@helixcode.com>

    * gui/component/addressbook.c (control_activate): remove _UIHandler

2000-09-21  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/load-pine-addressbook.c: Added a missing include
    of ctype.h.

    * backend/pas/pas-backend-file.c: Fixed a problem where using a
    GList was causing us to not be reentrant.  We now use an EList
    here and so now this is reentrant.  This should fix the "wombat
    crashes every time you run evolution" bug.

    * contact-editor/e-contact-editor.c: Fixed a type mismatch.

2000-09-21  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/load-pine-addressbook.c: Make this work when a
    field is spread across multiple lines.

2000-09-20  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added a
    wants_html field to cards.  Uses "x-mozilla-html".

    * contact-editor/Makefile.am: Added definition of
    EVOLUTION_DATADIR.

    * contact-editor/contact-editor.glade: Make Wants HTML check
    button visible.

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h: Make Wants HTML check button
    active.  Fix UI stuff to use XML.  Set parent window of
    confirm_delete dialog.

    * gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard.c: Set
    the parent window of the confirm_delete dialog.
    
2000-09-20  Christopher James Lahey  <clahey@helixcode.com>

    * gui/widgets/e-addressbook-view.c: Fixed display of the minicards
    when the addressbook was first loading.  (It was overwriting a
    string with NULL during init.)

2000-09-19  Dan Winship  <danw@helixcode.com>

    * gui/search/Makefile.am (ruledir): Use $(datadir), not
    $(prefix)/share

2000-09-18  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am, contact-editor/Makefile.am,
    ename/Makefile.am, gui/component/Makefile.am,
    gui/widgets/Makefile.am: Added $(EXTRA_GNOME_CFLAGS) and
    $(EXTRA_GNOME_LIBS).  Removed unneeded libraries.

    * backend/ebook/e-card.c, backend/pas/pas-backend-file.c,
    contact-editor/e-contact-editor-address.c,
    contact-editor/e-contact-editor-categories.c,
    contact-editor/e-contact-editor-categories.h,
    contact-editor/e-contact-editor-fullname.c,
    contact-editor/e-contact-editor.c,
    contact-editor/e-contact-save-as.c, ename/e-address-western.c,
    ename/test-ename-western-gtk.c,
    gui/component/addressbook-factory.c, gui/component/addressbook.c,
    gui/component/e-cardlist-model.h, gui/component/e-ldap-storage.c,
    gui/component/select-names/e-select-names-bonobo.c,
    gui/component/select-names/e-select-names-manager.c,
    gui/component/select-names/e-select-names-model.c,
    gui/component/select-names/e-select-names-table-model.c,
    gui/component/select-names/e-select-names-table-model.h,
    gui/component/select-names/e-select-names-text-model.h,
    gui/component/select-names/e-select-names.c,
    gui/component/select-names/e-select-names.h,
    gui/search/e-addressbook-search-dialog.c,
    gui/widgets/e-addressbook-model.h,
    gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard-label.c,
    gui/widgets/e-minicard-view-widget.c,
    gui/widgets/e-minicard-view-widget.h,
    gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h,
    gui/widgets/e-minicard-widget.h, gui/widgets/e-minicard.c,
    gui/widgets/test-minicard-label.c, gui/widgets/test-reflow.c,
    printing/e-contact-print.c: Fixed the #include lines to deal
    properly with gal.
    
2000-09-15  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.h,
    contact-editor/e-contact-save-as.h,
    gui/widgets/e-addressbook-model.h,
    gui/widgets/e-minicard-view-widget.h,
    gui/widgets/e-minicard-view.h, gui/widgets/e-minicard.c,
    gui/widgets/e-minicard.h: Fixed the paths of some .h #includes.

    * gui/component/addressbook.c: Removed all of the code to actually
    create and display the correct view of the addressbook and moved
    it to the new class gui/widgets/e-addressbook-view.c.

    * gui/widgets/Makefile.am: Added everything necessary for
    e-addressbook-view.c and e-addressbook-view.h.

    * gui/widgets/e-addressbook-view.c,
    gui/widgets/e-addressbook-view.h: New class to deal with actual
    display of addresses and switching between card view and table
    view.

    * gui/widgets/e-minicard-view-widget.c: Made this deal more
    gracefully with having the book set to NULL.

2000-09-16  Michael Meeks  <michael@helixcode.com>

    * gui/component/select-names/e-select-names.c: fix broken include.

    * gui/component/Makefile.am (INCLUDES): define datadir.
    (evolution_addressbook_SOURCES): remove e-addressbook-model.[ch]

    * gui/component/addressbook.c (control_activate): use datadir.

2000-09-16  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/widgets/Makefile.am (gladedir): Define.
    (glade_DATA): Install `alphabet.glade'.
    (EXTRA_DIST): Define.

    * gui/component/Makefile.am (glade_DATA): Remove `alphabet.glade'.
    (EXTRA_DIST): Remove `alphabet.glade.h'.

    * gui/widgets/Makefile.am (libeminicard_a_SOURCES): Add
    `e-addressbook-model.c' and `e-addressbook-model.h'.  I hope this
    is what Chris meant to do.

    * gui/component/Makefile.am (INCLUDES): Add
    `-I$(top_srcdir)/addressbook/gui/widgets'.
    (evolution_addressbook_SOURCES): Remove `e-addressbook-model.c'
    and `e-addressbook-model.h'.

    * gui/component/select-names/e-select-names.c: #include
    "e-addressbook-model.h" from "addressbook/gui/widgets" instead of
    "addressbook/gui/component", as it has been moved there.

2000-09-15  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c: split all the ldap operations
    into 2 halves, a handler, and destructor, and create a structure
    containing two function pointers and any data they need.  this
    allows us queue up pending operations (since the LDAP*'s are no
    longer view specific.  there's one per backend.)  also, add
    support for restarting async operations if the SERVER DOWN error
    isn't communicated until sometime after the handler is called (as
    is the case with the async search stuff.)

2000-09-14  Dan Winship  <danw@helixcode.com>

    * gui/component/addressbook-factory.c (main): Call unicode_init
    for e-font stuff.

2000-09-14  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/Makefile.am, gui/widgets/Makefile.am: Added
    $(GNOME_PRINT_LIBS) to all of the test files in these directories.

2000-09-14  Michael Meeks  <michael@helixcode.com>

    * gui/component/Makefile.am (evolution_addressbook_LDADD): fix path.

    * gui/component/addressbook.c: update include.

    * gui/component/addressbook-factory.c: update include.

    * gui/widgets/e-minicard-view.h: update include.

    * gui/search/e-addressbook-search-dialog.c: update include path.

2000-09-13  Michael Meeks  <michael@helixcode.com>

    * contact-editor/e-contact-editor.c (e_contact_editor_init): hack.
    (create_toolbar): ditto.

2000-09-07  Michael Meeks  <michael@helixcode.com>

    * gui/component/addressbook.c: Radicaly update UI handler code.

2000-09-13  Christopher James Lahey  <clahey@helixcode.com>

    * gui/widgets/*, gui/minicard/*: Moved gui/minicard to
    gui/widgets, except for e-reflow.c, e-reflow.h, e-reflow-sorted.c,
    and e-reflow-sorted.h.

    * gui/widgets/Makefile.am: Added e-reflow to the INCLUDES list and
    libereflow.a to a bunch of LDADD lines.

    * gui/component/Makefile.am (evolution_addressbook_LDADD): Added
    libereflow.a here.

    * gui/Makefile.am (SUBDIRS): Replaced minicard with widgets.

2000-09-12  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/select-names/Makefile.am: Add space after `-I'
    when invoking `orbit-idl'.

2000-09-12  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/Makefile.am (EXTRA_DIST): Remove `ui.xml'.

2000-09-11  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Fixed a crash error.

2000-09-11  Christopher James Lahey  <clahey@helixcode.com>

    * ename/e-address-western.c: Fixed some warnings.

2000-09-11  Jesse Pavel <jpavel@helixcode.com>

    * ename/e-address-western.c: fixed certain address parsing
    problems.

2000-09-11  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/fulladdr.glade: Made this a bit better balanced.

    * gui/component/addressbook.c: Make the toolbar button for find do
    the same thing that the menu item for search does.

    * gui/search/e-addressbook-search-dialog.c: Made the top half of
    this not expand.

2000-09-11  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
    Removed a bunch of redundant code.  Made it so that when you set
    an address label, it sets the delivery address as well.  Added
    functions to set and get the delivery address.

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added code to
    convert and address label to a delivery address.

    * contact-editor/Makefile.am: Added e-contact-editor-address.[ch],
    fulladdr.glade, fulladdr.glade.h.

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor-strings.h: Switched from a label
    to a button to show the parsed address.

    * contact-editor/e-contact-editor-address.c,
    contact-editor/e-contact-editor-address.h: New class to implement
    the parsed address dialog.

    * contact-editor/e-contact-editor-fullname.c,
    contact-editor/e-contact-editor-fullname.h: Added const to the
    _new function.

    * contact-editor/e-contact-editor.c: Implemented clicking on the
    address button.

    * contact-editor/fulladdr.glade, contact-editor/fulladdr.glade.h:
    New glade files for the parsed address dialog.

    * contact-editor/fullname-strings.h, fullname.glade: Changed these
    accellabels to labels.

    * ename/Makefile.am: Added e-address-western.c.

    * ename/e-address-western.c: Fixed some warnings.

2000-09-10  Christopher James Lahey  <clahey@helixcode.com>

    * ename/e-address-western.c: Added by Jesse.

2000-09-08  Lauris Kaplinski  <lauris@helixcode.com>

    * gui/minicard/e-minicard-label.c (e_minicard_label_construct):
    Use canvas default font

    * gui/minicard/e-minicard.c (e_minicard_realize): Ditto
    (get_left_width): Ditto

2000-09-08  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c: Fixed a few warnings.

2000-09-02  Lauris kaplinski  <lauris@helixcode.com>

    * contact-editor/e-contact-editor-categories.c: e_utf8 wrappers

    * contact-editor/e-contact-editor.c: e_utf8 wrappers

2000-09-01  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/e-ldap-storage.c (load_ldap_data): Updated for the
    extra arg now needed by `evolution_storage_new_folder()'.
    (e_ldap_storage_add_server): Likewise.

2000-08-31  Ettore Perazzoli  <ettore@helixcode.com>

    * conduit/Makefile.am (INCLUDES): Add `BONOBO_GNOME_CFLAGS' and
    `-I$(top_srcdir)'.

2000-08-31  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am: Install load-gnomecard-addressbook
    and load-pine-addressbook.

2000-08-30  Lauris Kaplinski  <lauris@helixcode.com>

    * printing/e-contact-print.c: Countless small changes for gnome-print 0.21+

2000-08-30  Dan Winship  <danw@helixcode.com>

    * gui/component/addressbook.oafinfo: Add a name to the minicard
    viewer.

2000-08-29  Dan Winship  <danw@helixcode.com>

    * backend/ebook/e-book.c: 
    * backend/ebook/test-client.c: 
    * backend/ebook/test-client-list.c: 
    * backend/ebook/load-gnomecard-addressbook.c: 
    * backend/ebook/load-pine-addressbook.c: 
    * backend/pas/pas-book-factory.c: 
    * conduit/address-conduit.h: Remove USING_OAF checks

2000-08-28  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Use the right argument name to turn
    on grid lines.

2000-08-26  JP Rosevear  <jpr@helixcode.com>

    * gui/minicard/Makefile.am: Comment out minicard-view-test
    since its gnorba dependent
    
2000-08-26  JP Rosevear  <jpr@helixcode.com>

    * gui/component/addressbook-component.c: Remove gnorba stuff

    * gui/minicard/e-minicard-control.c (e_minicard_control_factory_init):
    ditto

    * gui/component/addressbook.c: ditto

    * gui/component/addressbook-factory.c: ditto

2000-08-25  Christopher James Lahey  <clahey@helixcode.com>

    * demo/* Removed the demo directory since it's no longer used.

2000-08-26  JP Rosevear  <jpr@helixcode.com>

    * gui/minicard/Makefile.am: Remove gnorba stuff

    * gui/minicard/e-minicard-control.gnorba: Kill
    
2000-08-26  JP Rosevear  <jpr@helixcode.com>

    * gui/component/addressbook.gnorba: Kill

    * gui/component/Makefile.am:  Remove gnorba stuff

2000-08-25  Dan Winship  <danw@helixcode.com>

    * gui/component/Makefile.am (evolution_addressbook_LDFLAGS): Add
    -export-dynamic so libglade will be able to resolve custom widget
    callbacks.

2000-08-23  Lauris Kaplinski  <lauris@helixcode.com>

    * backend/pas/pas-backend-file.c (func_contains): Use e_utf8_strstrcase

    * contact-editor/e-contact-editor-fullname.c (fill_in_field): Use e_utf8 wrapper
    (extract_field): Same

    * contact-editor/e-contact-editor.c (full_name_clicked): Don't crash

    * ename/Makefile.am: Link demo with libeutil.la

    * ename/test-ename-western-gtk.c (full_changed_cb): Use e_utf8 wrapper

    * gui/component/addressbook.c (find_contact_cb): Use e_utf8 wrapper
    (search_entry_activated): Same

2000-08-22  Christopher James Lahey  <clahey@helixcode.com>

    * gui/search/e-addressbook-search-dialog.c: Fix an error in the
    arguments to rule_context_load.

    * backend/ebook/e-card.c: Fix this to not mess up if the person
    passes a VCard with a carriage return in the mailing address.

2000-08-14  Not Zed  <NotZed@HelixCode.com>

    * gui/search/addresstypes.xml: Fixed fullname->full_name for
    search field.

    * gui/search/e-addressbook-search-dialog.c (get_widget): Check we
    actually got any parts to build the dialogue with.

2000-08-13  Not Zed  <NotZed@HelixCode.com>

    * gui/component/addressbook-component.c (owner_set_cb): Set the
    global_shell_client nastyhack when we know it.
    This is only required to link with the filter code ...

    * gui/component/Makefile.am (evolution_addressbook_LDADD): Added
    libfilter.a to the link line.

    * gui/search/Makefile.am (noinst_LIBRARIES): Change library name
    from libaddressbooksearchdialog to libaddressbooksearch, as used
    elsewhere.

    * gui/search/e-addressbook-search-dialog.c (get_widget):
    Implement.
    (get_query): Likewise.
    (e_addressbook_search_dialog_destroy): Unref filter stuff when
    done.

    * gui/component/addressbook.c (control_deactivate): Added chris's
    patch to put the meny in

2000-08-22  Lauris Kaplinski  <lauris@helixcode.com>

    * contact-editor/e-contact-editor.c: Use e_utf8 wrappers everywhere

2000-08-22  Christopher James Lahey  <clahey@helixcode.com>

    * backend/e-card.h: Started adding a time zone field to ECard.

    * gui/component/e-addressbook-model.c: Added
    e_table_model_pre_change where appropriate.

    * gui/minicard/e-minicard-control.c: Added a ref and unref pair.

2000-08-22  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Linked in the search dialog again.
    It looks like some changes in the shell made this not work.

2000-08-19  Christopher James Lahey  <clahey@helixcode.com>

    * conduit/address-conduit.c, conduit/address-conduit.h: Changed
    this to use ECardSimple.

    * contact-editor/e-contact-editor.c: Fixed a memory leak.

    * gui/component/addressbook.c: Added stuff to the right click
    menu.  Activated the new search dialog that doesn't quite work
    yet.

    * gui/minicard/e-minicard-view.c: Fixed some run time warnings.

2000-08-15  Larry Ewing  <lewing@helixcode.com>

    * gui/minicard/e-minicard.c (e_minicard_event): use style colors
    for the selected state.  This doesn't properly redraw the minicard
    when there is a style_change event, that is next.
    (e_minicard_realize): use style colors.

2000-08-14  Peter Williams  <peterw@helixcode.com>

    * backend/pas/pas-backend-file.c: Include the proper db1/db.h
    as in RedHat 7.0 -- patch from Kenny Graunke <kwg@teleport.com>

2000-08-13  Chris Toshok  <toshok@helixcode.com>

    * conduit/Makefile.am (libaddress_conduit_la_SOURCES): add
    address-conduit.h

    * Makefile.am (CONDUIT_SUBDIR): only set subdir if
    ENABLE_PILOT_CONDUITS is set.

2000-08-13  Chris Toshok  <toshok@helixcode.com>

    * Makefile.am (SUBDIRS): add conduit subdir.

2000-08-13  Chris Toshok  <toshok@helixcode.com>

    * conduit/address-conduit.c (conduit_get_gpilot_conduit): add
    special oaf initialization hack so conduit can find wombat, and
    accept all cookies so that we can actually talk to oaf.

2000-08-13  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c: Fixed a typo that cause the
    wrong field to be searched.

    * gui/component/select-names/e-select-names.c: Made the select
    names dialog only display entries with email addresses.

2000-08-12  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/contact-editor.glade: Fixed a typo in the name of
    the first phone entry.

2000-08-12  Christopher James Lahey  <clahey@helixcode.com>

    * gui/search/Makefile.am,
    gui/search/e-addressbook-search-dialog.c,
    gui/search/e-addressbook-search-dialog.h: A few small interface
    fixes.

    * gui/component/Makefile.am: Link in the addressbook search
    dialog.

2000-08-12  Christopher James Lahey  <clahey@helixcode.com>

    * gui/Makefile.am: Added the search directory.

    * backend/ebook/e-book.c: Fixed a potential crash.

    * gui/minicard/e-reflow-sorted.h: Fixed an include line.

    * gui/search/.cvsignore, gui/search/Makefile.am: New files.

    * gui/search/e-addressbook-search-dialog.c: Fixed compilation.

2000-08-12  Christopher James Lahey  <clahey@helixcode.com>

    * printing/Makefile.am: Ettore fixed compilation.

2000-08-12  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/.cvsignore: Added load-gnomecard-addressbook.

2000-08-12  Christopher James Lahey  <clahey@helixcode.com>

    * gui/search/e-addressbook-search-dialog.c,
    gui/search/e-addressbook-search-dialog.h: Made this into a Gtk
    object.

2000-08-12  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-book-view.c: Ref our book view listener.

    * gui/component/addressbook.c: Updated to use new minicard view
    widget.

    * gui/minicard/Makefile.am: Added e-minicard-view-widget.c and
    e-minicard-view-widget.h.

    * gui/minicard/e-minicard-view-widget.c,
    gui/minicard/e-minicard-view-widget.h: New class that's just a
    minicard view in an ECanvas.

    * gui/search/e-addressbook-search-dialog.c: New file for
    implementing a search dialog.

2000-08-11  Chris Toshok  <toshok@helixcode.com>

    * conduit/address-conduit.c (transmit): implement code to encode
    the first email address and send to the pilot.
    (get_phone_label_by_flag): rename find_phone_label_for_flags to
    this, and implement by calling get_phone_label_by_name.

2000-08-11  Chris Toshok  <toshok@helixcode.com>

    * conduit/address-conduit.c (ecard_from_remote_record): add code
    for handling email addresses from pilot (which stores it as a
    phone number entry.  go figure.)
    (check_for_slow_setting): #if 0 out, since we don't use it (yet).
    (update_record): un #if 0 the code to handle the case where the
    pilot info has changed for a local record.
    (merge_ecard_with_remote_record): implement function, but for now
    just return the existing (desktop) record - we still don't allow
    merge from the pilot.


2000-08-10  Christopher James Lahey  <clahey@helixcode.com>

    * gui/search/addresstypes.xml: Changed a couple of input field
    names.

2000-08-10  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook-component.c: Remove prototype for
    `setup_ldap_storage()', which shouldn't be here anyway.

2000-08-10  Christopher James Lahey  <clahey@helixcode.com>

    * gui/search/, gui/search/addresstypes.xml: New search dialog for
    addressbook.

2000-08-10  Dan Winship  <danw@helixcode.com>

    * gui/component/addressbook-component.c (owner_set_cb): Update for
    changed prototype, pass evolution_homedir arg to
    setup_ldap_storage.

    * gui/component/e-ldap-storage.c (setup_ldap_storage): Now takes
    an evolution_homedir arg, uses that to generate the path to the
    ldapservers.xml file, and stores the result in a static variable.
    (e_ldap_storage_add_server, e_ldap_storage_remove_server): Use that
    static variable rather than hardcoding the path to the file.

2000-08-10  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c: Fixed any search to not crash on
    missing phone numbers or email addresses.

2000-08-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard-control.c: Added a button to save to
    your addressbook.

2000-08-09  Cody Russell  <bratsche@gnome.org>

    * gui/component/addressbook.c: Make the toolbar honor the user's
    gnomecc settings for detachable toolbars.

2000-08-09  Nat Friedman  <nat@helixcode.com>

    * ename/e-name-western-tables.h: Added some military prefixes.

2000-08-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Fixed a warning.

2000-08-09  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook.c (control_activate): Add the stock
    print icon to the print item.

2000-08-09  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook.c (control_activate): Put the print
    item in the right placeholder so that it gets the right position
    in the "File" menu.
    (control_deactivate): Updated accordingly.

2000-08-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c, gui/minicard/e-minicard.c: Changed
    e_popup_menu_run call to match the new arguments.

    * gui/component/addressbook.oafinfo: Fixed this file to work
    properly.

    * gui/minicard/e-minicard-control.c: Use the correct oafinfo ID
    here.  Also cleaned up the code a bit with the help of Michael
    Meeks.

2000-08-08  Chris Toshok  <toshok@helixcode.com>

    * gui/component/e-addressbook-model.c (e_addressbook_model_init):
    use x-evolution-any-field.

    * gui/component/addressbook.c (search_entry_activated): use
    x-evolution-any-field.
    (change_view_type): same.

    * gui/minicard/e-minicard-view.c (e_minicard_view_init): set query
    to x-evolution-any-field.

    * backend/pas/pas-backend-ldap.c (func_contains): support
    x-evolution-any-field for matching any evolution supported field.

    * backend/pas/pas-backend-file.c (compare_email): switch to using
    ECardSimple calls.
    (compare_phone): same.
    (compare_address): same.
    (entry_compare): switch to using ECardSimple calls, and support a
    'x-evolution-any-field' wildcard field.
    (vcard_matches_search): use an ECardSimple.

2000-08-07  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Removed the next and prev
    toolbar buttons since they don't do anything.

2000-08-07  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor.c: Fixed the tab order to not
    repeat the web page address field.

2000-08-07  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Fixed the tab order for this
    dialog.

2000-08-05  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c: Fixed a warning.

    * backend/ebook/e-card.c: Cast to (char *) in
    e_card_load_cards_from_file since libversit isn't const correct.

    * backend/pas/pas-backend-file.c: Fixed a warning.

2000-08-04  Michael Meeks  <michael@helixcode.com>

    * gui/component/addressbook.c (control_activate): unref.

    * demo/addressbook.c (control_activate): unref.

2000-08-02  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c,
    gui/component/e-addressbook-model.c: Emit "model_pre_change"
    signal as appropriate.

2000-08-02  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/e-addressbook-model.c: Adapted this to supply the
    new append_row API of ETableModel.

2000-07-31  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Changed the default set of columns.

2000-07-29  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am: Added load-gnomecard-addressbook
    compilation.

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added
    e_card_load_cards_from_file helper function to load multiple cards
    from a single file.

    * backend/ebook/load-gnomecard-addressbook.c: New file to load
    vcard files.  I think this is the format that gnomecard uses so if
    you copy your gnomecard file to gnomecard.vcf and then run this
    program in the same directory, it'll copy all your gnome contacts
    into evolution.  It needs to be changed to take a filename as a
    parameter.  Some fields (phone and address information, for
    example) aren't displayed properly, but are saved.  This is new
    code, so some other than phone and address may be lost.

2000-07-28  Ettore Perazzoli  <ettore@helixcode.com>

    * backend/pas/Makefile.am: Add `pas-backend-ldap.c' and
    `pas-backend-ldap.h' to `EXTRA_DIST' so they get distributed even
    if the OpenLDAP support is not enabled.

2000-07-27  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/load-pine-addressbook.c: Changed the URI to load
    to.

2000-07-26  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard-widget-test.c: Fixed a warning.

2000-07-26  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c (view_destroy): wait to free the
    view until we've taken care of freeing its internals.  also, close
    the ldap connection here.
    (pas_backend_ldap_connect): rename p_b_l_ensure_connected to this,
    since it's always called when we create a view.
    (pas_backend_ldap_build_all_cards_list): open an ldap connection
    in this function and close it at the end.
    (poll_ldap): make sure to call ldap_unbind to close the view's
    connection here.
    (pas_backend_ldap_search): call pas_backend_ldap_connect here -
    ldap_unbind will either be called from poll_ldap or from
    view_destroy.
    (pas_backend_ldap_get_vcard): the PASBackendLDAP no longer has an
    LDAP*.

2000-07-26  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_build_all_cards_list): add support for user settable scope.
    (pas_backend_ldap_search): same.
    (pas_backend_ldap_load_uri): same.

2000-07-26  Dan Winship  <danw@helixcode.com>

    * gui/component/addressbook.oafinfo: lowercasify the
    supported_mime_types

2000-07-25  Chris Toshok  <toshok@helixcode.com>

    * backend/ebook/e-card-types.h: add enum for e-card pilot status.

    * conduit/address-conduit.c: #ifdef out all the archiving code with SUPPORT_ARCHIVING.
    (purge): implement correctly - deleting ecards whose pilot status is DELETED.
    (set_status): implement.
    (set_pilot_id): add gtk_main call here to change commit_card into a synchronous
    (delete_all): implement correctly - don't delete the records, just set their status to DELETED.
    (local_record_from_ecard): get the current status from the ecard.

    * backend/ebook/e-card.c (e_card_get_vcard): add vcard support for pilot status.
    (parse_pilot_status): new function.
    (e_card_class_init): add pilot status object arg.
    (e_card_set_arg): add pilot status support.
    (e_card_get_arg): same.
    (e_card_init): initialize pilot_status to 0.

2000-07-25  Chris Toshok  <toshok@helixcode.com>

    * conduit/address-conduit.c: add comment headers to signals that
    didn't have any.
    
2000-07-25  Chris Toshok  <toshok@helixcode.com>

    * conduit/address-conduit.c (start_address_server): use the user's
    Contact db.  not toshok's.

2000-07-25  Michael Meeks  <michael@helixcode.com>

    * backend/ebook/load-pine-addressbook.c (book_open_cb): check we
    opened ok.

2000-07-25  Seth Alves  <alves@hungry.com>

    * ename/Makefile.am (libename_static_la_LDFLAGS): build static
    version of the library for address conduit to use

    * backend/ebook/Makefile.am: build a static version of the library
    to link into the conduit

2000-07-25  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Added a #define for
    "X-EVOLUTION-PILOTID".  Added a parse_pilot_id to read pilot id's
    in properly from VCards.  Rearranged some field orders.  Added a
    get_arg case for ARG_PILOTID.  Initialize pilot_id field to 0.

2000-07-24  Chris Toshok  <toshok@helixcode.com>

    * backend/ebook/e-card.h: add pilot_id.

    * backend/ebook/e-card.c (e_card_get_vcard): add support for
    X-EVOLUTION-PILOTD vcard field.
    (e_card_class_init): add pilot_id arg.
    (e_card_set_arg): handle pilot_id arg.

2000-07-23  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-book-view-listener.c: Remove the idle handler
    when we're destroyed.

    * printing/e-contact-print.c: Fixed the spacing on the card
    header.

2000-07-20  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.oafinfo: Fixed the oaf info.

    * gui/minicard/.cvsignore, gui/minicard/Makefile.am,
    gui/minicard/e-minicard-widget-test.c: Added a test for the
    minicard widget.

    * gui/minicard/e-minicard-control.c: Fixed the mime type.

    * gui/minicard/e-minicard.c: Fixed some crashes if your parent
    isn't a minicard view.

    * gui/minicard/e-minicard-control.oafinfo: Removed.

2000-07-20  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook-component.c (factory_fn): Update for
    the new `evolution_shell_component_new()'.

2000-07-19  Fatih Demir <kabalak@gmx.net>
    
    * conduit/address-conduit-control-applet.desktop:
        Added the Turkish desktop entry.

2000-07-18  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard-control.c: Added "text/vCard" to the
    list of mime types we support.

2000-07-18  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/Makefile.am: Added
    gui/minicard/e-minicard-control.c,
    gui/minicard/e-minicard-control.h,
    gui/minicard/e-minicard-widget.c, and
    gui/minicard/e-minicard-widget.h.

    * gui/minicard/e-minicard-control.c,
    gui/minicard/e-minicard-control.h,
    gui/minicard/e-minicard-widget.c,
    gui/minicard/e-minicard-widget.h: Got these to compile.

    * gui/minicard/e-minicard-control.gnorba,
    gui/minicard/e-minicard-control.oafinfo: Copied directly from
    bonobo-clock-control.  These aren't done yet.

2000-07-18  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard-control.c,
    gui/minicard/e-minicard-control.h,
    gui/minicard/e-minicard-widget.c,
    gui/minicard/e-minicard-widget.h: New files for using a minicard
    as a widget or a bonobo control.

2000-07-14  Chris Toshok  <toshok@helixcode.com>

    * gui/component/e-ldap-storage.c (ldap_server_foreach): duh.
    don't save the port in the host slot either.

2000-07-13  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-confirm-delete.glade,
    contact-editor/e-contact-editor-confirm-delete.glade.h: Added
    these.

2000-07-13  Christopher James Lahey  <clahey@helixcode.com>

    * Makefile.am: Switched the order of compilation of printing and
    contact-editor.

    * contact-editor/Makefile.am: Added printing libraries and a
    confirm delete dialog glade file.

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h: Enabled the delete and print
    functions as well as providing a confirm delete dialog to the
    outside world.

    * gui/component/addressbook.c: Made the delete button on new cards
    active.

    * gui/minicard/Makefile.am: Added printing libraries to a number
    of test programs.

    * gui/minicard/e-minicard.c: Added print and delete to the right
    click menu.  Made the delete button on the card editor active.

    * printing/e-contact-print.c, printing/e-contact-print.h: Added a
    function to print a single card.

2000-07-12  Chris Toshok  <toshok@helixcode.com>

    * gui/component/e-ldap-storage.c (ldap_server_foreach): oops.  fix
    typo that was saving the port in the rootdn spot.
    (save_ldap_data): make this a bit safer - writing to a new file
    and renaming it.
    (load_ldap_data): make this a bit smarter - if parsing the
    ldapservers.xml file fails and there's a .new file there,
    rename it.
    
2000-07-12  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c: Do case insensitive compares.

    * addressbook/gui/component/addressbook.c: Make quick search
    search both name and company name.

2000-07-12  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Add icons to the toolbars.

2000-07-12  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/Makefile.am: Added installation of arrow.png.

    * contact-editor/e-contact-editor.c: Use EVOLUTIONDIR #define.

2000-07-11  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Removed an unused function

2000-07-10  Dan Winship  <danw@helixcode.com>

    * gui/component/select-names/Makefile.am (EXTRA_DIST): add idl
    file to EXTRA_DIST

2000-07-10  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook.c (control_activate): Remove the
    SelectNames test.

2000-07-10  Peter Williams  <peterw@curious-george.helixcode.com>

    * gui/component/select-names/e-select-names-model.c: (Clahey's fix)
    Make multiple addresses be concatenated correctly.

2000-07-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c,
    gui/component/select-names/e-select-names.c,
    gui/component/select-names/e-select-names.h: Switched from ETable
    to ETableScrolled.

    * addressbook/gui/minicard/e-minicard.c: Don't display mailer or
    "name or org" fields.

2000-07-09  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
    Added a field that gives the name if it exists and the company
    name otherwise.

    * gui/component/e-addressbook-model.c: Formatting changes.

    * gui/component/select-names/e-select-names-table-model.c: Added
    stripping of names and display of company name if name doesn't
    exist.

    * gui/component/select-names/e-select-names.c: Fixed up the
    display so that we display both name and email address.

2000-07-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/e-select-names-model.c: Fixed a small
    off by one error that was causing an extra character to get
    deleted sometimes.

2000-07-09  Anders Carlsson  <andersca@gnu.org>

    * gui/minicard/test-reflow.c (allocate_callback): Fix off by one bug with
    scroll region setting.
    (resize): Likewise.
    (main): Put the contacts list in an EScrolledFrame instead of using a
    separate GtkScrollbar.

    * gui/minicard/e-reflow.c (e_reflow_event): Don't change mouse cursor and
    don't allow drags on dividers that aren't visible.

    * gui/component/addressbook.c (allocate_callback): Fix off by one bug with
    scroll region setting.
    (resize): Likewise.
    (create_minicard_view): Put the contacts list in an EScrolledFrame instead of
    using a separate GtkScrollbar.

2000-07-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Removed unused do_nothing_cb
    function.

    * gui/component/select-names/e-select-names-manager.c,
    gui/component/select-names/e-select-names-manager.h: Made the OK
    and Cancel buttons in the ESelectNames dialog we create work
    properly.
    
    * gui/component/select-names/e-select-names-model.c,
    gui/component/select-names/e-select-names-model.h: Added
    e_select_names_model_duplicate.

    * gui/component/select-names/e-select-names-text-model.c: Made the
    text be set correctly if there's already data in the source when
    the text model is created.

    * gui/component/select-names/e-select-names.c,
    gui/component/select-names/e-select-names.h: Removed handling of
    the buttons (the user of this dialog will have to handle them.)
    Added e_select_names_get_source.  Fixed some typos.

2000-07-09  Not Zed  <NotZed@HelixCode.com>

    * gui/component/addressbook.c: Link the toolbar print button to
    the print callback.

2000-07-08  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/e-select-names.c
    (e_select_names_clicked): Hitting OK or Cancel at least closes the
    dialog now.

2000-07-08  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_manager_create_entry): Set the returned entry to
    use the ellipsis.

2000-07-08  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook-factory.c: Include
    e-select-names-factory.h.

    * gui/component/select-names/e-select-names-model.c: Handle a NULL
    iterator properly in the replace function.

    * gui/component/select-names/e-select-names-table-model.c: Fill in
    info properly in the value_at function.

    * gui/component/select-names/e-select-names-text-model.c: Don't
    strlen a NULL text object.

    * gui/component/select-names/e-select-names.c: Close if the person
    hits ok or cancel (doesn't yet actually undo changes if Cancel is
    hit.)  Handle removing addresses when they're double clicked on.

    * gui/component/select-names/select-names.glade,
    gui/component/select-names/select-names.glade.h: Hid some unused
    fields and changed the text at the top of the dialog.

2000-07-08  Jeffrey Stedfast  <fejj@helixcode.com>

    * gui/component/select-names/.cvsignore: Ignore dynamically 
    created source files

2000-07-08  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/select-names/e-select-names-bonobo.c
    (entry_get_property_fn): New function to set the properties.

2000-07-08  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook-factory.c (main): Start up the factory
    for `Evolution::Addressbook::SelectNames'.

    * gui/component/select-names/evolution-addressbook-select-names.oafinfo:
    New.

    * gui/component/select-names/e-select-names-factory.c: New.
    * gui/component/select-names/e-select-names-factory.h: New.

    * gui/component/select-names/e-select-names-bonobo.c: New.
    * gui/component/select-names/e-select-names-bonobo.h: New.

    * gui/component/addressbook-factory.c (main): Call
    `e_select_names_factory_init()'.

    * gui/component/select-names/e-select-names-manager.c
    (e_select_names_manager_add_section): Made const-aware.
    (e_select_names_manager_create_entry): Made const-aware.
    (e_select_names_manager_activate_dialog): Made const-aware.

    * gui/component/select-names/Evolution-Addressbook-SelectNames.idl:
    New.

2000-07-08  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/e-addressbook-model.c,
    gui/component/e-addressbook-model.h: Added an "editable" argument.

    * gui/component/select-names/e-select-names.c: Set our
    EAddressModel to not be editable.

2000-07-07  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/e-select-names.c: Changed to line
    mode.

2000-07-07  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/e-select-names-manager.c,
    gui/component/select-names/e-select-names-model.c: Implemented the
    get_cards function.

    * gui/component/select-names/e-select-names.c: Implemented adding
    cards through the interface.

2000-07-07  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/e-select-names-manager.c: Make the
    entry widgets we create editable.

    * gui/component/select-names/e-select-names-model.c: Use
    e_strsplit instead of g_strsplit.  Fixed an off by 1 error.

    * gui/component/select-names/e-select-names-table-model.c: When
    the model changes, send a model changed signal.

    * gui/component/select-names/e-select-names-text-model.c: Made
    changing this work correctly if it's empty.  Made change signals
    propagate properly.  Is a bit better about freeing iterators when
    done.

    * gui/component/select-names/e-select-names.c: Made the finished
    lists be in order instead of being sorted.

2000-07-07  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c (new_server_cb): Since
    ELDAPServer->port is a char *, allocate a string with the number
    389 contained.

    * gui/component/addressbook.c: Make the select names test test the
    new code instead of the old way of getting to an ESelectNames
    dialog.

    * gui/component/select-names/e-select-names-manager.c: Coded
    storing the model for each section, creating an entry and
    returning it, and for activating the dialog.  Wrote a bit of the
    get_cards code, but not all of it.

    * gui/component/select-names/e-select-names-model.c,
    gui/component/select-names/e-select-names-model.h: Coded all of
    the code needed to make ESelectNamesTextModel work (it doesn't
    yet, but all the code should be there.)  Removed
    E_SELECT_NAMES_MODEL_DATA_TYPE_SEPARATION_MATERIAL.

    * gui/component/select-names/e-select-names-table-model.c,
    gui/component/select-names/e-select-names-text-model.c: Changed
    these to compensate for removal of
    E_SELECT_NAMES_MODEL_DATA_TYPE_SEPARATION_MATERIAL.

    * gui/component/select-names/e-select-names-table-model.h,
    gui/component/select-names/e-select-names-text-model.h: Fixed some
    silly typos.

    * gui/component/select-names/e-select-names.c,
    gui/component/select-names/e-select-names.h: Added a parameter to
    add_section that lets you specify the source ESelectNamesModel.
    
2000-07-06  Chris Toshok  <toshok@helixcode.com>

    * gui/component/e-ldap-storage.h: add scope to ELDAPServer, and
    make port a string.

    * gui/component/e-ldap-storage.c (load_ldap_data): don't load a
    uri, load all the bits and pieces and build up the uri when
    creating the folder, according to the openldap url format.
    (ldap_server_foreach): store out each of the individual uri
    pieces.
    (e_ldap_storage_remove_server): free the new fields.
    (get_string_value): if the text is empty, return the empty string
    instead of NULL.

    * gui/component/e-ldap-server-dialog.c (extract_server_info): port is a string now.
    (fill_in_server_info): port is a string now.

2000-07-06  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Changed "FIXME: Save and
    Close" to "Save and Close".  Removed some toolbar items that will
    never be used.

    * gui/component/select-names/e-select-names-model.c,
    gui/component/select-names/e-select-names-model.h: Added functions
    to allow you to modify the model (not implemented yet.)

    * gui/component/select-names/e-select-names-table-model.c,
    gui/component/select-names/e-select-names-table-model.h: Finished
    this.  Doesn't support changing the model at all.

    * gui/component/select-names/e-select-names-text-model.c: Finished
    this.  Changing the model by typing is done, but doesn't work
    since none of the functions in the base model are implemented.

2000-07-05  Chris Toshok  <toshok@helixcode.com>

    * gui/component/addressbook.c (new_server_cb): call
    e_ldap_storage_add_server call.

    * gui/component/ldap-server-dialog.glade: add name row.

    * gui/component/e-ldap-server-dialog.h: remove the ELDAPServer type.

    * gui/component/e-ldap-server-dialog.c (extract_server_info): add
    support for the name-entry.

    * gui/component/e-ldap-server-dialog.c (fill_in_server_info): same.

    * gui/component/e-ldap-storage.h: add ELDAPServer type, and add
    prototypes for e_ldap_storage_add_server and
    e_ldap_storage_remove_server.

    * gui/component/e-ldap-storage.c (e_ldap_storage_add_server): new
    function, add it to our hash table, add a shell folder, and save
    out the metadata.
    (ldap_server_foreach): add the ldap server info under a
    "contactserver" node.
    (setup_ldap_storage): create our hashtable.

2000-07-05  Chris Toshok  <toshok@helixcode.com>

    * gui/component/addressbook.c (set_prop): remove hack to read
    "uri" file from local directory.

    * gui/component/Makefile.am (evolution_addressbook_SOURCES): add
    e-ldap-storage.{c,h}

    * gui/component/addressbook-component.c (owner_set_cb): call
    setup_ldap_storage.

    * gui/component/e-ldap-storage.c (setup_ldap_storage): Register
    the LDAP storage and load the .xml file.
    (load_ldap_data): function to load our xml file.
    (save_ldap_data): function to save our xml file.

    * gui/component/e-ldap-storage.h: new file.

2000-07-03  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/e-select-names-manager.c,
    gui/component/select-names/e-select-names-text-model.c,
    gui/component/select-names/e-select-names.c: Fixed more compile
    errors.

2000-07-03  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/Makefile.am: Fixed compile error.

2000-07-03  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am: Removed e-card-iterator.c,
    e-card-iterator.h, e-card-list-iterator.c, e-card-list-iterator.h,
    e-card-list.c, e-card-list.h.

    * backend/ebook/e-card-iterator.c,
    backend/ebook/e-card-iterator.h,
    backend/ebook/e-card-list-iterator.c,
    backend/ebook/e-card-list-iterator.h, backend/ebook/e-card-list.c,
    backend/ebook/e-card-list.h: Removed in favor or versions without
    the -card in the e-util directory since these classes are not
    specific to cards at all.

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h,
    backend/ebook/e-card.c, backend/ebook/e-card.h,
    backend/ebook/load-pine-addressbook.c, backend/ebook/test-card.c,
    backend/pas/pas-backend-file.c: Changed the references to
    e-card-list.c and friends to e-list.c and friends.

    * contact-editor/e-contact-editor.c: Added #include
    <e-contact-save-as.h> to fix a warning.

    * gui/component/Makefile.am: Moved a number of classes associated
    with the select-names object to the new select-names directory.

    * gui/component/addressbook.c: Changed the reference to
    e-select-names.h.

    * gui/component/e-select-names.c, gui/component/e-select-names.h,
    gui/component/select-names.glade,
    gui/component/select-names.glade.h: Moved these files into
    select-names/.

    * gui/component/select-names/.cvsignore,
    gui/component/select-names/Makefile.am,
    gui/component/select-names/e-select-names-manager.c,
    gui/component/select-names/e-select-names-manager.h,
    gui/component/select-names/e-select-names-model.c,
    gui/component/select-names/e-select-names-model.h,
    gui/component/select-names/e-select-names-table-model.c,
    gui/component/select-names/e-select-names-table-model.h,
    gui/component/select-names/e-select-names-text-model.c,
    gui/component/select-names/e-select-names-text-model.h,
    gui/component/select-names/e-select-names.c,
    gui/component/select-names/e-select-names.h,
    gui/component/select-names/recipient.glade,
    gui/component/select-names/select-names.glade,
    gui/component/select-names/select-names.glade.h: New files for
    select names dialog (e-select-names.c, e-select-names.h,
    select-names.glade, select-names.glade.h and recipient.glade moved
    from gui/component/.)

2000-06-29  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook-component.c (owner_set_cb): Get an
    EvolutionShellClient instead of an Evolution_Shell to match the
    changes in libeshell.

2000-06-28  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names/,
    gui/component/select-names/e-select-names-manager.c,
    gui/component/select-names/e-select-names-manager.h: New select
    names manager interface (Not complete.)

2000-06-26  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c,
    addressbook/gui/component/e-cardlist-model.c: Added
    value_to_string handlers.

    * demo/addressbook-widget.c, demo/demo.c: Removed usage of "x" and
    "y" arguments.

    * addressbook/gui/component/addressbook.c: Activated Click To Add
    and set the click to add message.

    * addressbook/gui/component/e-addressbook-model.c: Added
    value_to_string and append_row handlers.

    * addressbook/gui/component/e-select-names.c: Added a column.

2000-06-26  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c (poll_ldap): remove spew.
    (pas_backend_ldap_ensure_connected): duh, don't access a pointer
    we know to be NULL.
    (query_prop_to_ldap): rename map_e_card_prop_to_ldap to this.
    easier to type.

2000-06-21  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/test-minicard-label.c,
    gui/minicard/test-minicard.c, gui/minicard/test-reflow.c: Remove
    usage of "x" and "y" arguments.

2000-06-18    <ettore@helixcode.com>

    * contact-editor/Makefile.am (INCLUDES): Use
    `$(BONOBO_GNOME_CFLAGS)' so that we compile when Bonobo is not in
    the default GNOME prefix.

2000-06-17  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard-label.c,
    gui/minicard/e-minicard-label.h, gui/minicard/e-minicard.c: Made
    the left column of minicards not get any wider than the widest
    possible name.

2000-06-13  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/Makefile.am (SHELL_OBJS): Removed.
    (evolution_addressbook_LDADD): Link with
    `$(top_builddir)/shell/libeshell.a'.

2000-06-12  Federico Mena Quintero  <federico@helixcode.com>

    * contact-editor/e-contact-editor-categories.c: Removed the
    ETableModel thaw handler.
    * gui/component/e-cardlist-model.c: Likewise.

2000-06-11  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/e-select-names.c: Fixed the widget reparenting.

2000-06-11  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/Makefile.am: Added glade files.

    * gui/component/addressbook.c: Added a test of the Select Names
    functionality.

    * gui/component/e-addressbook-model.c: Made this class_init
    function a bit cleaner.

    * gui/component/e-select-names.c: Tested this and fixed some
    obvious errors.

    * gui/component/select-names.glade: The main window shouldn't be
    visible by default.

2000-06-11  Ettore Perazzoli  <ettore@helixcode.com>

    * contact-editor/Makefile.am (contact_editor_test_LDADD): Link
    with libemiscwidgets.a.
    * gui/component/Makefile.am (evolution_addressbook_LDADD): Likewise.
    * gui/minicard/Makefile.am (minicard_test_LDADD): Likewise.
    (reflow_test_LDADD): Likewise.
    (minicard_view_test_LDADD): Likewise.

2000-06-10  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/e-cardlist-model.c: Renamed a bunch of functions
    for better readability.

    * gui/component/e-select-names.c, gui/component/e-select-names.h:
    This should be a working dialog now.

    * gui/component/select-names.glade: Changed the name & creation
    function of the ETable here.

2000-06-10  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/select-names.glade,
    gui/component/select-names.glade.h: Glade files for Select Names
    dialog.

2000-06-10  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Do e_card_simple_sync and
    extract_info more often.

    * gui/component/addressbook.c: Added table printing code.

2000-06-09  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook-component.c (factory_fn): Pass NULL
    for the new args @create_folder_fn and @remove_folder_fn.

2000-06-08  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook-component.c (create_view): Updated for
    the new `EvolutionShellComponentCreateViewFn'.  Return
    `EVOLUTION_SHELL_COMPONENT_UNSUPPORTEDTYPE' if @type is not
    "contacts".

2000-06-08  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Bind Save As to save the
    current view of the contact as a vcard.

2000-06-08  Federico Mena Quintero  <federico@helixcode.com>

    * contact-editor/e-contact-editor.c (save_card): Doh, sync the
    card simple and extract the card info.

2000-06-08  Federico Mena Quintero  <federico@helixcode.com>

    * contact-editor/e-contact-editor.h (EContactEditor): Now this
    derives from GtkObject.  It follows the same strategy as the
    EventEditor in the calendar.
    (EContactEditor): Added an is_new_card field so that we can know
    whether to add() or commit() the card.

    * contact-editor/e-contact-editor.c (e_contact_editor_get_type):
    Derive from GtkObject.
    (e_contact_editor_class_init): Likewise.
    (e_contact_editor_class_init): Added an "is_new_card" argument.
    (e_contact_editor_set_arg): Handle ARG_IS_NEW_CARD.
    (e_contact_editor_get_arg): Likewise.
    (e_contact_editor_new): Take in an is_new_arg argument and set it
    on the object.
    (e_contact_editor_init): Load the app widget into the app field of
    the EContactEditor structure.  Create its UIHandler as well.
    (e_contact_editor_class_init): New "add_card", "commit_card", and
    "editor_closed" signals.

    * contact-editor/test-editor.c (main): Modified for the new API.
    (editor_closed_cb): Tweaked for the new API.
    Since this test program does not use Bonobo, it doesn't work,
    though.

    * gui/component/addressbook.c (new_contact_cb): Use the new
    contact editor API.
    (table_double_click): Ditto.

    * gui/minicard/e-minicard-view.c (e_minicard_view_event): Use the
    new contact editor API.

    * gui/minicard/e-minicard.c (e_minicard_event): Use the new
    contact editor API.

2000-06-08  Ettore Perazzoli  <ettore@helixcode.com>

    * contact-editor/Makefile.am (contact_editor_test_LDADD): Remove
    the `$(srcdir)/' prefix from `libecontacteditor.a' because [of
    course] the library is built in the build directory, not in the
    source directory.
    * gui/minicard/Makefile.am (minicard_test_LDADD): Likewise with
    `libeminicard.a'.
    (minicard_label_test_LDADD): Likewise.
    (reflow_test_LDADD): Likewise.
    (minicard_view_test_LDADD): Likewise.

2000-06-06  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Bind right click on the ETable to
    "Save to VCard."

2000-06-02  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Made phone/email/address
    labels change correctly again.

2000-06-02  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook-component.c: Made
    evolution-addressbook shut down when the shell is done with it.

2000-06-02  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard-view.c, gui/minicard/e-minicard.c: Made
    double click only work on the first button.

2000-06-01  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard.c: return TRUE if opening a contact
    editor so that we don't get a "new dialog" contact editor.

2000-06-01  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook.c (new_contact_cb): Use the stock
    cancel button for the dialog.
    (table_double_click): Likewise.
    (find_contact_cb): Likewise.

2000-05-31  Miguel de Icaza  <miguel@helixcode.com>

    * contact-editor/contact-editor.glade: Added accelerators for
    the remaining items.

    Add spacing, beautify the dialogs.

2000-06-01  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook.c (control_activate): Put the toolbar
    into a frame to make it look like standard GNOME toolbars.  Also,
    set `GNOME_DOCK_ITEM_BEH_NEVER_VERTICAL' so that it does not do
    evil things when its moved to the left or the right of the window.

2000-05-30  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/e-cardlist-model.c,
    gui/component/e-cardlist-model.h: New files for card list.

2000-05-30  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Fixed a memory leak.

2000-05-30  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/alphabet.glade: Made the alphabet buttons not
    focusable.

    * gui/minicard/e-minicard-view.c: Made the "123" button work.

    * gui/minicard/e-reflow-sorted.c: Made all buttons past the last
    letter available work.

2000-05-30  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/alphabet.glade: Added a bit of space around the
    alphabet bar.

2000-05-30  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/Makefile.am: Added alphabet.glade and
    alphabet.glade.h.

    * gui/component/addressbook.c, gui/component/alphabet.glade,
    gui/component/alphabet.glade.h: Added an alphabet bar.

    * gui/minicard/e-minicard-view.c, gui/minicard/e-minicard-view.h,
    gui/minicard/e-reflow-sorted.c, gui/minicard/e-reflow-sorted.h:
    Added the ability to just to a particular spot in the reflow.

2000-05-30  Christopher James Lahey  <clahey@helixcode.com>

    * printing/Makefile.am: Added BONOBO_GNOME_CFLAGS to CPPFLAGS.

2000-05-30  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard-view.c: Made double clicking create a
    new card.  Set the empty message.

    * gui/minicard/e-minicard.c: Made sorting be case insensitive.

    * gui/minicard/e-reflow-sorted.c, e-reflow.c, e-reflow.h: Added a
    message for when the reflow is empty.

    * printing/e-contact-print.c, printing/medbook.ecps: Made the
    default printout be full page.  Made sorting case insensitive.

2000-05-30  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-book-view-listener.c,
    backend/ebook/e-book-view-listener.h, backend/ebook/e-book-view.c,
    backend/ebook/e-book-view.h, backend/idl/addressbook.idl,
    backend/pas/pas-backend-file.c, backend/pas/pas-backend-ldap.c,
    backend/pas/pas-book-factory.c, backend/pas/pas-book-view.c,
    backend/pas/pas-book-view.h: Added "sequence_complete" signal.

    * printing/e-contact-print.c: Made printing wait for
    "sequence_complete" signal and made it sort.

2000-05-25  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c,
    gui/component/e-addressbook-model.c,
    gui/component/e-addressbook-model.h: Added double click to open
    contact editor.

2000-05-25  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Removed some columns.

2000-05-25  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/component/addressbook.c (addressbook_factory_new_control):
    New function.
    (addressbook_factory): Use it.

    * Makefile.am (evolution_addressbook_LDADD): Link with
    `evolution-shell-component.o' from the shell directory.

    * gui/component/addressbook-component.c: New.
    * gui/component/addressbook-component.h: New.

2000-05-23  Christopher James Lahey  <clahey@helixcode.com>

    * Makefile.am: Switched printing and gui.

    * backend/ebook/e-book-view-listener.h,
    backend/ebook/e-book-view.h, backend/ebook/e-book.h,
    backend/ebook/e-card-cursor.h, backend/ebook/e-card-list.h,
    backend/ebook/e-card-simple.h, backend/ebook/e-card.h: Fixed the
    #defines to work elsewhere in evolution.

    * gui/component/Makefile.am: Added linking to libecontactprint.

    * gui/component/addressbook.c: Added a menu item to print the
    current query.

    * printing/Makefile.am: Add linking to libebook and requirements.
    Add installation of ecps files.

    * printing/e-contact-print.c, printing/e-contact-print.h: Changed
    this to use real data from an EBook.

    * printing/test-print.c: Made this pass NULL, NULL to
    e_contact_print_dialog_new so that it will compile.

2000-05-23  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-save-as.c: Fixed some memory leaks.

2000-05-23  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/Makefile.am: Added e-contact-editor-save-as.c and
    e-contact-editor-save-as.h.

    * contact-editor/e-contact-save-as.c,
    contact-editor/e-contact-save-as.h: New files that display a save
    as dialog and then save the given card to that file.

    * gui/minicard/e-minicard.c: Call e_contact_save_as in a right
    click menu.

2000-05-19  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c,
    gui/component/e-addressbook-model.c: Added initialize_value and
    value_is_empty callbacks.

2000-05-19  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Fixed a bug that broke
    address field support.

2000-05-19  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h: Added support for arbitrary
    fields in the contact editor.

2000-05-18  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Fixed e_card_name_copy and
    e_card_arbitrary_copy to deal correctly with a passed NULL.

    * contact-editor/Makefile.am: Removed imagesdir stuff.

    * contact-editor/arrow.png: Made this transparent.

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor-strings.h: Renamed some widgets
    and added custom widgets for all of the images.

    * contact-editor/e-contact-editor.c: Worked on making this work
    decently well with messed up glade files.  Cleaned up a lot of code.

2000-05-18  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Fixed the code to write out and read in
    arbitrary fields.

2000-05-18  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h,
    backend/ebook/e-card-types.h, backend/ebook/e-card.c,
    backend/ebook/e-card.h: Implemented "MAILER" field.  Added
    arbitrary field support.

    * contact-editor/e-contact-editor-categories.c: Fixed a warning.

2000-05-16  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
    Added E_CARD_SIMPLE_FIELD_MAILER.  Not implemented yet.

2000-05-16  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c (construct_email_list): convert to use ECardSimple.
    (poll_ldap): same.

2000-05-16  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-book.h: add typedefs for the can_write
    functions, and add parameters to pas_book_new.

    * backend/pas/pas-book.c (pas_book_construct): add can_write/can_write_card params.
    (pas_book_new): same.
    (impl_Evolution_Book_can_write): new function.
    (impl_Evolution_Book_can_write_card): same.
    (pas_book_get_epv): assign the can_write/can_write_card slots in the epv.

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_can_write): new function.
    (pas_backend_ldap_can_write_card): same.
    (pas_backend_ldap_add_client): add can_write/can_write_card to pas_book_new call.

    * backend/pas/pas-backend-file.c (pas_backend_file_can_write_card): new function, calls can_write.
    (pas_backend_file_can_write): same.
    (can_write): return TRUE if we can write to the addressbook file.
    (pas_backend_file_add_client): add can_write/can_write_card to pas_book_new call.

    * backend/idl/addressbook.idl (Evolution): add can_write and
    can_write_card permission requests.

2000-05-16  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c (e_card_get_vcard): Fixed a large memory leak.

2000-05-16  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c (add_list_unique): Fixed another memory
    leak.

2000-05-16  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c, backend/pas/pas-backend-file.c,
    contact-editor/e-contact-editor.c, ename/e-name-western.c,
    gui/component/addressbook.c, gui/minicard/e-minicard-view.c: Fixed
    some memory leaks.

    * backend/ebook/e-card.c: Rearranged some code.

2000-05-16  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c: Fixed a reference
    leak.

2000-05-16  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c: Fixed a compile
    error.

2000-05-16  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c: Got rid of a
    memory leak.  Rearranged a couple functions.
    
    * gui/minicard/e-minicard-view.c, gui/minicard/e-minicard-view.h:
    Added some code to stop watching the EBook when the canvas is
    destroyed (apparently the canvas is destroyed before our widget is
    destroyed.)

2000-05-14  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-categories.c: Use the correct
    policy for resize.

2000-05-14  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am: Added libeutil for e-card's support
    for categories.

    * backend/ebook/e-card-list.c, backend/ebook/e-card-list.h: Added
    a function to get the length.

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added categories
    support (accessible either as "categories" or "category_list".)

    * contact-editor/Makefile.am: Added e-table and all of the
    categories files.

    * contact-editor/categories.glade,
    contact-editor/categories-strings.h,
    contact-editor/e-contact-editor-categories.c,
    contact-editor/e-contact-editor-categories.h:

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor-strings.h: Rearranged this dialog.

    * contact-editor/e-contact-editor.c: Rearranged dialog a bit.
    Added opening of categories dialog.

    * gui/component/Makefile.am: Rearranged libraries so that
    libetable would be available for the contact editor categories
    dialog.

    * gui/component/addressbook.c: Fix for new ETable resizing.  Make
    contact editor dialog resizable.

    * gui/minicard/Makefile.am: Added libetable contact editor
    categories dialog.

    * gui/minicard/e-minicard.c: Make contact editor dialog resizable.

2000-05-12  Miguel de Icaza  <miguel@gnu.org>

    * contact-editor/fulname.glade: Use accelerators here.

2000-05-13  Valek Filippov  <frob@df.ru>

    * gui/component/ldap-server-dialog.glade: save translatable strings
    * gui/component/ldap-server-dialog.glade.h: file with strings
    * printing/e-contact-print.glade: save translatable strings
    * printing/e-contact-print.glade.h: file with strings
        
2000-05-11  Dan Winship  <danw@helixcode.com>

    * gui/component/addressbook.c (control_activate): Now that we
    depend on recent gnome-libs we can make the toolbar detachable
    again.

2000-05-10  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Make the table view be sorted by
    name initially.

2000-05-10  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-book-factory.c: Send a proper response when you
    can't find the ldap URI.

    * gui/component/addressbook.c: Cleaned up the open error dialog a
    bit.

2000-05-10  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Added a dialog for when you can't
    open an addressbook.

2000-05-10  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am: Added e-book-types.h, e-card-pairs.h,
    e-card-types.h.

    * backend/pas/Makefile.am: Added pas-backend-ldap.h.

    * contact-editor/Makefile.am: Added a proper EXTRA_DIST section.
    Removed some old defines.

    * ename/Makefile.am: Added e-name-western-tables.h.

    * gui/component/Makefile.am: Added e-ldap-server-dialog.h.  Added
    a proper EXTRA_DIST section.

    * gui/minicard/e-reflow.c: Added a missed cast.

    * printing/Makefile.am: Added a proper EXTRA_DIST section.
    
2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Make sure that the canvas
    doesn't intercept keyboard focus.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Use new art.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor-strings.h: Replaced the Address
    button with a label and rearranged the address area a bit.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard.c: Reenable editting.

    * gui/minicard/e-reflow-sorted.c: Make reflow flow on deletion.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Destroy the view object when
    leaving the minicard view.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-reflow-sorted.c: Fixed reflow sorting to call
    reflow_request when sorting on an item changes.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c: Make File As change if name or
    company are changed pretty much anywhere.

    * gui/minicard/e-minicard.c: Turned off having minicard editing
    effect anything since it's so crashy.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-ldap.c: Enabled a couple more fields

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c: Added a default card to all new
    file backends.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/e-addressbook-model.c: Rearranged order of things
    getting destroyed.

    * gui/minicard/e-minicard-view.c: Rearranged order of things
    getting destroyed.  Don't set attributes of non-null or destroyed
    items.  Destroy parent object when destroyed.  Maintain ref_count
    of items in list.

    * gui/minicard/e-minicard.c: Don't set attributes of non-null
    items.

    * gui/minicard/e-reflow-sorted.c: Maintain ref_count of items in
    list.

    * gui/minicard/e-reflow.c: Maintain ref_count of items in list.
    Destroy parent object when destroyed.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c: Fixed some indentation.

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor-strings.h: Changed Email to
    Primary Email.

    * contact-editor/e-contact-editor.c: Added checkmarks to indicate
    if data exists in the pull down menus for the phone, address, and
    email fields.

2000-05-09  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c: Fixed the string duplication
    problem.  Fixed the business/home address string mix up.

    * gui/component/addressbook.c: Made the minicard view the default
    view.

2000-05-08  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c: Fixed this up a bit.  Syncing
    should work better now.

2000-05-08  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard-view.c, gui/minicard/e-minicard.c,
    gui/minicard/e-minicard.h, gui/minicard/e-reflow-sorted.c,
    gui/minicard/e-reflow-sorted.h: Made a minimal number of things be
    destroyed and recreated when updating a field.

2000-05-07    <toshok@the-dot-in.helixcode.com>

    * gui/minicard/e-minicard.c (remodel): make sure to free the
    return value of e_card_simple_get.

    * gui/component/addressbook.c (teardown_table_view): destroy the
    ECardSimple here, plug memory leak.
    (create_table_view): use view->simple so we can destroy the
    ECardSimple later on.

2000-05-07  Chris Toshok  <toshok@helixcode.com>

    * ename/e-name-western.c (e_name_western_extract_middle): comment
    function, and fix an ABR.

2000-05-07  Chris Toshok  <toshok@helixcode.com>

    * ename/e-name-western.c (e_name_western_cleanup_string): comment
    function, and fix an ABR.

2000-05-08  Christopher James Lahey  <clahey@helixcode.com>

    * gui/minicard/e-minicard.c: Added saving in minicard view.

2000-05-07  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c: Fixed an off by 2 error.

2000-05-07  Chris Toshok  <toshok@helixcode.com>

    * gui/component/addressbook.c (set_prop): don't create a new
    ebook.  instead, unload the current uri (if there is one) and load
    the new one.
    (addressbook_factory): create the ebook once.

2000-05-07  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/e-addressbook-model.c: Replaced some model_changed
    calls with row_inserted calls.

2000-05-07  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c, backend/pas/pas-backend-ldap.c:
    Removed some code that was notifying too many clients at the wrong
    times.

    * gui/component/addressbook.c: Set view->book.  Unreffed
    view->book.  Unreffed the model instead of destroying it.  Removed
    the /tmp/test.db stuff.

2000-05-07  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Make the addressbook create the
    correct file uri.  Added a default query.  Initialize view->model
    and view->view to NULL.

    * gui/component/e-addressbook-model.c,
    gui/minicard/e-minicard-view.c: Only call get_book_view if both
    book and query and non-null.

2000-05-06  Chris Toshok  <toshok@helixcode.com>

    * gui/component/addressbook.c (control_deactivate): remove the
    separator and toggle view items as well.
    (toggle_view_as_cb): callback for the "/View/Toggle View" menu
    item.
    (get_query): getter for the query string that takes into account
    the two view types.
    (set_query): setter for the query string that takes into account
    the two view types.
    (set_book): setter for the EBook type - not really a setter, since
    the book is kept in the AddressbookView, but this method actually
    sets the "book" property on the current view.
    (find_contact_cb): make use of get/set_query
    (search_entry_activated): make use of set_query.
    (control_activate): add a menu separator and an item to toggle
    between view types.
    (book_open_cb): make use of set_book.
    (ebook_create): no longer needs to return the EBook, since we set
    the book field in our view.
    (teardown_minicard_view): destructor function for the minicard
    specific ui.
    (create_minicard_view): constructor function for the minicard
    specific ui.
    (teardown_table_view): destructor function for the e-table
    specific ui.
    (create_table_view): constructor function for the e-table specific
    ui.
    (change_view_type): destroy the old and create the new view ui,
    change the label of the Toggle View menu item, and reset the book
    and query on the new view type.
    (addressbook_factory): create an all-encompassing vbox that the
    view uses to create the bonobo control, which contains 1 widget
    per ui specific view (the e-table in the table case, and another
    vbox in the minicard case.)  use change_view_type to create the
    initial view.

2000-05-07  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-book.c: Made a NULL callback just mean to not
    call back.

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
    Reordered fields.  Added a get_const function to get a constant
    string that persists until the simple is destroyed.

    * gui/component/Makefile.am: Added e-addressbook-model.c and
    e-addressbook-model.h and all of the libraries and includes that
    they are dependent on.

    * gui/component/addressbook-factory.c: Initialize e cursors.

    * gui/component/addressbook.c: Added inactive code to display an
    ETable view of the addressbook.

    * gui/component/e-addressbook-model.c,
    gui/component/e-addressbook-model.h: New files to implement an
    ETable model with a EBook back end.
    
2000-05-06  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
    Mostly finished ECardSimple.

    * contact-editor/e-contact-editor.c: Changed this to match with
    some of the changes to ECardSimple.

    * gui/component/addressbook.c: Changed this to look for
    "addressbook.db" in the given directory if it doesn't find the
    file "uri".

    * gui/minicard/e-minicard.c, gui/minicard/e-minicard.h: Changed
    this to use ECardSimple.

2000-05-06  Chris Toshok  <toshok@helixcode.com>
    
    * gui/component/.cvsignore: ignore evolution-addressbook.pure

    * gui/component/Makefile.am: add support for generating 
    evolution-addressbook.pure.

2000-05-06  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_load_uri): if a
    port isn't specified in the uri default to 389.

2000-05-06  Christopher James Lahey  <clahey@helixcode.com>

    * gui/component/addressbook.c: Made this take a uri through its
    property bag.

2000-05-05  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am: Added e-card-simple.c and
    e-card-simple.h.

    * backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
    New card wrapper class to simplify things.

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h: Changed e-contact-editor to use
    ECardSimple a bit.

2000-05-03  Chris Toshok  <toshok@helixcode.com>

    * gui/component/addressbook.c (control_deactivate): #ifdef
    HAVE_LDAP the ldap specific stuff.
    (null_cb): same.
    (control_activate): same.

2000-05-02  Ettore Perazzoli  <ettore@helixcode.com>

    * backend/ebook/Makefile.am (INCLUDES): Add
    `-I$(top_srcdir)/addressbook/ename'.

2000-05-02  Matt Loper  <matt@helixcode.com>

    * demo/Makefile.am: set G_LOG_DOMAIN.
    * printing/Makefile.am: same.

2000-05-01  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-book-factory.c: Add back in the
    CORBA_Object_release.

    * backend/pas/pas-book.c: Properly duplicate and release the
    listener passed to us.

2000-05-01  Christopher James Lahey  <clahey@helixcode.com>

    * backend/pas/pas-backend-file.c, backend/pas/pas-backend-ldap.c:
    Made uri slightly better managed.
    
    * backend/pas/pas-book-factory.c
    (pas_book_factory_process_request): Remove this
    CORBA_Object_release that causes things not to work.  This is just
    a temporary fix until we figure out what's actually wrong.

    * backend/pas/pas-book.c: Fixed a copy and paste error in a warning.
    
2000-05-01  Christopher James Lahey  <clahey@helixcode.com>

    * Makefile.am: Switched the subdirs order since backend depends on
    ename.

2000-05-01  Larry Ewing  <lewing@helixcode.com>

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_remove_client):
    fix a typo in the for loop.

2000-05-01  Michael Meeks  <michael@helixcode.com>

    * backend/pas/pas-book-factory.c: include gtk.

2000-04-30  Federico Mena Quintero  <federico@helixcode.com>

    * backend/ebook/e-book-types.h (EBookStatus): Added new status
    values for the IDL stuff.

    * backend/pas/pas-book-factory.h (PASBookFactoryClass): New
    "last_book_gone" signal.

    * backend/pas/pas-book-factory.c
    (pas_book_factory_launch_backend): Better error handling.
    (pas_book_factory_process_queue): Let
    pas_book_factory_process_request() free the request.
    (pas_book_factory_process_request): Free the request here.
    Perform better error handling.
    (free_active_server_map_entry): Free an active server map entry;
    free the URI key and unref the backend value.  This function was
    renamed; the old one was trying to CORBA_Object_unref() a GTK+
    object!
    (remove_backends_entry): Free a backend table entry; free the URI
    key.
    (backend_last_client_gone_cb): Remove the backend from the active
    server map and emit the "last_book_gone" signal if appropriate.
    (pas_book_factory_get_n_backends): New function to query the
    number of running backends in an addressbook factory.

    * backend/idl/addressbook.idl (BookListener::CallStatus): Added a
    ProtocolNotSupported code.  This is for when the addressbook
    factory cannot find a provider for the requested URI.

    * backend/pas/pas-backend.h (PASBackendClass): New
    "last_client_gone" signal.
    (PASBackendClass): New get_uri virtual method.

    * backend/pas/pas-backend.c (pas_backend_load_uri): Return a
    gboolean success code.
    (pas_backend_add_client): Return a gboolean success code.
    (pas_backend_last_client_gone): New function used by backend
    implementations to notify upwards when the backend's last client
    is destroyed.
    (pas_backend_get_uri): New function to get the URI of a backend.

    * backend/pas/pas-backend-file.c (pas_backend_file_add_client):
    Pass the backend as the closure data to the "destroy" handler of
    the book.  We cannot call pas_book_get_backend() in the callback
    since the book's private data has already been destroyed when the
    callback is invoked.  Alternatively, we could move the private
    data destruction step to the book's ::finalize() method.
    (pas_backend_file_book_destroy_cb): Get the backend from the
    callback's data, not from the book.
    (pas_backend_file_remove_client): Remove the book from the list of
    clients.  When all clients go away, call
    pas_backend_last_client_gone().
    (PASBackendFilePrivate): Added an uri field.
    (pas_backend_file_get_uri): Implement the get_uri method.
    (pas_backend_file_load_uri): Return a gboolean success code.
    Also, store the URI in the private structure.
    (pas_backend_file_add_client): Return a gboolean success code.
    Also, call pas_backend_last_client_gone() if appropriate.
    (pas_backend_file_destroy): Free the bf->priv->uri.

    * backend/pas/pas-backend-ldap.c (pas_backend_ldap_add_client):
    Pass the backend as the closure data to the "destroy" handler of
    the book.  See above for rationale.
    (pas_backend_ldap_book_destroy_cb): Get the backend from the
    callback's data.
    (pas_backend_ldap_remove_client): Remove the book from the list of
    clients.  When all clients go away, call
    pas_backend_last_client_gone().
    (pas_backend_ldap_load_uri): Return a gboolean success code.
    (pas_backend_ldap_add_client): Return a gboolean success code.
    Also, call pas_backend_last_client_gone() if appropriate.
    (PASBackendLDAPPrivate): New uri field.
    (pas_backend_ldap_get_uri): Implement the get_uri method.
    (pas_backend_ldap_load_uri): Store the uri in the private
    structure.
    (pas_backend_ldap_destroy): Free the bl->priv->uri.

2000-04-30  Chris Toshok  <toshok@helixcode.com>

    * gui/component/Makefile.am (evolution_addressbook_SOURCES): added
    e-ldap-server-dialog.c
    (glade_DATA): added ldap-server-dialog.glade

    * gui/component/ldap-server-dialog.glade: new file.

    * gui/component/e-ldap-server-dialog.h: new file.

    * gui/component/e-ldap-server-dialog.c: new file, contains logic
    associated with ldap server dialog.

    * gui/component/addressbook.c (control_deactivate): remove the
    directory server menu item.
    (null_cb): do nothing callback for e_book_load_uri call.  should
    change to (at the very least) pop up a dialog if there was an
    error.
    (new_server_cb): new function - really just switches to a
    particular ldap server, since the information isn't saved
    anywhere.
    (control_activate): add directory server menu item.

2000-04-30  Chris Toshok  <toshok@helixcode.com>

    * backend/ebook/e-book.c (e_book_load_uri): create the book
    listener here, since it's destroyed in unload_uri.
    (e_book_construct): remove the book listener construction here.

2000-04-30  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/.cvsignore: Added load-pine-addressbook.

2000-04-30  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor.c, gui/minicard/e-minicard.c: Made
    some fields invisible that were visible before.

2000-04-30  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c: Make file as not have the : after it if
    it's empty.  If there's no name, or file_as, fill in these fields
    with defaults based on full_name or name respectively.

    * backend/ebook/load-pine-addressbook.c: New file to do import of
    pine .addressbook files.

    * backend/pas/pas-backend-file.c: Made empty fields act as the
    empty string for searches.

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h: Made the File As field update
    properly as you edit the name and company fields.  Added the pull
    down list of File As choices.  Made sure that all fields will
    be set to NULL if they are deleted to the empty string.

    * gui/minicard/e-minicard.c: Use the File As field instead of the
    Full Name field for the header.  Make identical compares on the
    File As field do a compare on the uid.

2000-04-30  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor-fullname.c,
    contact-editor/fullname.glade: Fixed a string mismatch.

2000-04-30  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/Makefile.am: Added ename includes and libs.

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added
    e_card_name_from_string.  Added header for
    e_card_delivery_address_from_string, even though it's not
    implemented yet.

    * contact-editor/Makefile.am: Removed the ename includes since we
    no longer use ename directly here.

    * contact-editor/e-contact-editor.c: Fixed this to properly save
    the address labels displayed.  Updated this to use the function
    e_card_name_from_string instead of doing it by hand.

    * contact-editor/fullname-strings.h,
    contact-editor/fullname.glade: Deleted an unused field.  Changed
    the set of prefixes and suffixes.

2000-04-30  Chris Toshok  <toshok@helixcode.com>

    * backend/pas/pas-backend-ldap.c
    (pas_backend_ldap_ensure_connected): add support for a rootdn in
    the uri.
    (pas_backend_ldap_build_all_cards_list): make use of the rootdn in
    the call to ldap_search_s.
    (pas_backend_ldap_search): same.
    (pas_backend_ldap_load_uri): get the rootdn out of the passed in uri.

2000-04-29  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added
    e_card_phone_new e_card_delivery_address_new,
    e_card_delivery_address_to_string, e_card_name_copy,
    e_card_name_new, e_card_name_to_string, and made e_card_name_free
    public.  Removed some unused code.

    * backend/pas/pas-backend-file.c: Fixed a warning.

    * contact-editor/Makefile.am: Added e-contact-editor-fullname.[ch]
    and fullname.glade.  Added e-name libs and includes.

    * contact-editor/e-contact-editor-fullname.c,
    contact-editor/e-contact-editor-fullname.h,
    contact-editor/fullname-strings.h, contact-editor/fullname.glade:
    New dialog for editing the fields of a name separately.

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h: Create an
    EContactEditorFullname when you click on the Full Name button.
    Maintain a parsed name at all times.

    * gui/component/Makefile.am, gui/minicard/Makefile.am: Added
    e-name libs.

2000-04-28  Larry Ewing  <lewing@helixcode.com>

    * backend/pas/pas-book-factory.c (register_factory): fix the
    `USING_OAF' changes so that they work for when we are not using
    oaf.

2000-04-27  Ettore Perazzoli  <ettore@helixcode.com>

    * ename/Makefile.am
    (gnome_libs): Use `BONOBO_GNOME_LIBS'.
    (INCLUDES): Add `-I$(srcdir)/..'.

    * backend/pas/pas-book-factory.c
    (register_factory): New function to register the factory.
    Implementation different according to `USING_OAF'.
    (pas_book_factory_activate): Use `register_factory()'.

    * gui/component/addressbook.c: New #define `CONTROL_FACTORY_ID',
    varying depending on whether we are `USING_OAF'.
    (addressbook_factory_init): Use `CONTROL_FACTORY_ID'.

    * backend/ebook/test-client.c (init_corba): New function,
    implemented differently according to the `USING_OAF' #define.

    * backend/ebook/e-book.c: New #define `CARDSERVER_OAF_ID'.
    (e_book_construct): Work with OAF #if `USING_OAF'.

    * backend/ebook/Makefile.am (gnome_libs): Removed.
    (corbadir): Removed.
    (ebook_libs): Removed.
    (test_client_LDADD): Just add `libebook.la'.
    (test_card_LDADD): Likewise.
    (test_client_list_LDADD): Likewise.

    * gui/component/addressbook-factory.c
    (init_corba): New helper function, implemented differently
    according to `USING_OAF'.
    (main): Call `init_corba()'.

2000-04-27  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card.c, backend/ebook/e-card.h: Added file as,
    office, manager, assistant, spouse, and anniversary fields.  These
    all use "X-EVOLUTION-" fields in the VCards.

    * backend/pas/pas-backend-file.c: Added all the new fields (except
    anniversary) to the list of fields.

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor-strings.h: Fixed some misnamed
    fields and fixed the placement of the comments field.

    * contact-editor/e-contact-editor.c: Made the newly added fields
    display properly.

    * Makefile.am: Added ename.

    * ename/e-name-western.h, ename/test-ename-western-gtk.c,
    ename/test-ename-western.c: Fixed up some #includes.

    * ename/.cvsignore: Added .cvsignore.

2000-04-26  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-types.h, backend/ebook/e-card.c,
    backend/ebook/e-card.h: Added an address label field.

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor-strings.h: Got rid of some unused
    fields.

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h: Added the address label field.
    Load only.  Editing these fields seems to mess things up.

2000-04-26  Christopher James Lahey  <clahey@helixcode.com>

    * contact-editor/e-contact-editor.c: Added proper handling of the
    email field.

2000-04-26  Christopher James Lahey  <clahey@helixcode.com>

    * backend/ebook/e-card-types.h, backend/ebook/e-card.c,
    gui/minicard/e-minicard.c: Prefixed the ADDR_ flags.

    * contact-editor/contact-editor.glade,
    contact-editor/e-contact-editor-strings.h: Edited the glade file.
    Removed all the fields that we don't use.

    * contact-editor/e-contact-editor.c,
    contact-editor/e-contact-editor.h: Made the phone fields work
    properly.  The address and email fields are temporarily turned off
    until they can be made to work as the phone fields do.

2000-04-25  Ettore Perazzoli  <ettore@helixcode.com>

    * gui/minicard/Makefile.am (INCLUDES): Use
    `$(BONOBO_GNOME_CFLAGS)'.

    * backend/pas/Makefile.am (idl_flags): Add `-I $(datadir)/idl' to
    pick up IDL files in the installation prefix as well.
    (INCLUDES): Use `$(BONOBO_GNOME_CFLAGS)'.

    * backend/ebook/Makefile.am (ORBIT_IDL): Use `-I $(datadir)/idl'
    to get the IDLs from the installation prefix as well.
    (INCLUDES): Add `$(BONOBO_GNOME_CFLAGS)'.
    (test_client_LDADD): Use `$(BONOBO_GNOME_LIBS)' instead of
    hardcoding `-lbonobo'!  Also get rid of some other useless flags,
    as `$(BONOBO_GNOME_LIBS)' really has all what we need.
    (test_client_list_LDADD): Likewise.
    (test_card_LDADD): Likewise.

2000-04-18  Federico Mena Quintero  <federico@helixcode.com>

    * gui/minicard/Makefile.am (INCLUDES): Use "e-minicard" as the log
    domain.

    * gui/component/Makefile.am (INCLUDES): Use
    "evolution-addressbook" as the log domain.

    * backend/pas/Makefile.am: Build libpas.a, not a shared library.
    Do not install any header files.
    (INCLUDES): Remove spurious include paths.

    * backend/pas/*.[ch]: Fix includes.

    * backend/ebook/Makefile.am: Do not install the test programs.
    Fixed some include weirdness.

    * backend/ebook/*.[ch]: Fix includes.

    * contact-editor/Makefile.am (INCLUDES): Set the log domain to
    "contact-editor".
    (INCLUDES): Fix.

    * contact-editor/*.[ch]: Fix includes.

    * gui/minicard/*.[ch]: Fix includes.

    * ChangeLog: Started a ChangeLog here.