Added support for substituting chickens for goats in ritual sacrifice.

Completely rewrote the automake/autoconf support. The comments at the top of the file have been greatly expanded in order to explain just what you are allowed to do and what will get you a visit from Mr. Hose. Please read this information.

Added DOCSDIR, EXAMPLESDIR to PLIST_SUB.

Added a PERL_LEVEL variable (documented up top) that gives an integer
value that can be used for comparisons to determine whether the user's
perl is new enough or not, or to enable or disable certain dependencies
(AHEM FILE::SPEC) based on the perl version.

Added a SITE_PERL variable, which points to the correct "site-packages"
directory. This is also added to PLIST_SUB.

No gerbils were harmed (seriously, anyway) in the making of this patch,
however some of them may be a bit sore for a few days.

Submitted by:	billg
Reviewed by:	kris
Approved by:	kris
Obtained from:	you really don't want to know this one

1 files changed, 240 insertions, 80 deletions

diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk
index 9e674cd73662..28f14a0dfb27 100644
--- a/Mk/bsd.port.mk
+++ b/Mk/bsd.port.mk
@@ -1,4 +1,4 @@
-#-*- mode: Fundamental; tab-width: 4; -*-
+#-*- mode: makefile; tab-width: 4; -*-
 # ex:ts=4
 #
 # $FreeBSD$
@@ -145,54 +145,74 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #				  the system or installed from a port.
 # USE_GMAKE		- Says that the port uses gmake.
 # GMAKE			- Set to path of GNU make if not in $PATH (default: gmake).
-# USE_AUTOMAKE		- Says that the port uses automake.  Implies
-#			USE_AUTOCONF and USE_AUTOMAKE_VER?=14.
-# USE_AUTOMAKE_VER	- Says that the port uses automake. Possible
-#				values: 14, 15;
-#				each specify a version of automake to use
-#				and appropriatly set both AUTOMAKE{,_DIR}
-#				and ACLOCAL{,_DIR} variables.
-#				Implies USE_AUTOMAKE.  If set with
-#				unknown value, defaults to 14.
-# AUTOMAKE		- Set to path of GNU automake if not in $PATH (default:
-#				according to USE_AUTOMAKE_VER value)
-# AUTOMAKE_ARGS	- Pass these args to ${AUTOMAKE} if ${USE_AUTOMAKE_VER} is set.
-# AUTOMAKE_ENV	- Pass these env (shell-like) to ${AUTOMAKE} if
-#				${USE_AUTOMAKE_VER} is set.
-# ACLOCAL	- Set to path of GNU automake aclocal if not in $PATH (default:
-#				according to USE_AUTOMAKE_VER value)
-# ACLOCAL_DIR	- Set to path of GNU automake aclocal shared directory (default:
-#				according to USE_AUTOMAKE_VER value)
-# AUTOMAKE_DIR	- Set to path of GNU automake shared directory (default:
-#				according to USE_AUTOMAKE_VER value)
-# USE_AUTOCONF_VER	- Says that the port uses autoconf. Possible
-#				values: 213;
-#				each specify a version of autoconf to use
-#				and appropriatly set both AUTOCONF{,_DIR}
-#				and ACLOCAL{,_DIR} variables.
-#				Implies USE_AUTOCONF.  If set with
-#				unknown value, defaults to 213.
-# USE_AUTOCONF	- Says that the port uses autoconf.  Implies
-#				GNU_CONFIGURE and USE_AUTOCONF_VER?=213.
-# AUTOCONF	- Set to path of GNU autoconf if not in $PATH (default:
-#				according to USE_AUTOCONF_VER value)
-# AUTOCONF_ARGS	- Pass these args to ${AUTOCONF} if ${USE_AUTOCONF} is set.
-# AUTOCONF_ENV	- Pass these env (shell-like) to ${AUTOCONF} if
-#				${USE_AUTOCONF} is set.
-# AUTOHEADER	- Set to path of GNU autoconf autoheader
-#				if not in $PATH (default: according
-#				to USE_AUTOCONF_VER value)
-# AUTORECONF	- Set to path of GNU autoconf autoreconf
-#				if not in $PATH (default: according
-#				to USE_AUTOCONF_VER value)
-# AUTOSCAN	- Set to path of GNU autoconf autoscan
-#				if not in $PATH (default: according
-#				to USE_AUTOCONF_VER value)
-# AUTOIFNAMES	- Set to path of GNU autoconf autoifnames
-#				if not in $PATH (default: according
-#				to USE_AUTOCONF_VER value)
-# AUTOCONF_DIR	- Set to path of GNU autoconf shared directory (default:
-#				according to USE_AUTOCONF_VER value)
+# USE_AUTOMAKE (PORT MAY SET THIS VALUE)	
+#				- Says that the port uses automake.  
+#				- Implies USE_AUTOCONF and USE_AUTOMAKE_VER?=14.
+#				- Causes automake execution prior to configure step.
+# USE_AUTOMAKE_VER (PORT MAY SET THIS VALUE)
+#				- Says that the port uses automake; legal values
+#				  are: 14, 15, 17.
+#				- Each specify a version of automake to use
+#				  and appropriatly set both AUTOMAKE{,_DIR}
+#				  and ACLOCAL{,_DIR} variables.
+#				- Implies USE_AUTOMAKE. 
+#				- If set with an unknown value, the port is marked BROKEN.
+# AUTOMAKE_ARGS (PORT MAY ALTER THIS VALUE)
+#				- Pass these args to ${AUTOMAKE} if ${USE_AUTOMAKE_VER} 
+#				  is set. If an application sets this value, it should
+#				  use the += form of assignment to append, not overwrite.
+# USE_AUTOCONF (PORT MAY SET THIS VALUE)
+#				- Says that the port uses autoconf.
+#				- Implies GNU_CONFIGURE=yes and USE_AUTOCONF_VER?=213.
+#				- Causes autoconf execution prior to configure step.
+# USE_AUTOCONF_VER (PORT MAY SET THIS VALUE)
+#				- Says that the port uses autoconf; legal values
+#				  are: 213, 253, 254.
+#				- Each specify a version of autoconf to use
+#				  and appropriatly set AUTOCONF{,_DIR} and other
+#				  autoconf-related program paths.
+#				- Implies USE_AUTOCONF.
+#				- If set with an unknown value, the port is marked BROKEN.
+# AUTOCONF_ARGS (PORT MAY ALTER THIS VALUE)
+#				- Pass these args to ${AUTOCONF} if ${USE_AUTOCONF_VER} 
+#				  is set. If an application sets this value, it should
+#				  use the += form of assignment to append, not overwrite.
+# AUTOMAKE (READ-ONLY)
+#				- Set to path of GNU automake (default:
+#				  according to USE_AUTOMAKE_VER value)
+# AUTOMAKE_ENV (READ-ONLY)
+#				- Pass these env var=value pairs (shell-like) 
+#				  to ${AUTOMAKE} if ${USE_AUTOMAKE_VER} is set.
+# ACLOCAL (READ-ONLY)
+#				- Set to path of GNU automake aclocal (default:
+#				  according to USE_AUTOMAKE_VER value)
+# ACLOCAL_DIR (READ-ONLY)
+#				- Set to path of GNU automake aclocal shared directory 
+#                 (default:	according to USE_AUTOMAKE_VER value)
+# AUTOMAKE_DIR (READ-ONLY)
+#				- Set to path of GNU automake shared directory (default:
+#				  according to USE_AUTOMAKE_VER value)
+# AUTOCONF (READ-ONLY)
+#				- Set to path of GNU autoconf (default:
+#				  according to USE_AUTOCONF_VER value)
+# AUTOCONF_ENV (READ-ONLY)
+#				- Pass these env var=value pairs (shell-like) 
+#				  to ${AUTOCONF} if ${USE_AUTOCONF_VER} is set.
+# AUTOHEADER (READ-ONLY)
+#				- Set to path of GNU autoconf autoheader
+#				  (default: according to USE_AUTOCONF_VER value)
+# AUTORECONF (READ-ONLY)
+#				- Set to path of GNU autoconf autoreconf
+#				  (default: according to USE_AUTOCONF_VER value)
+# AUTOSCAN (READ-ONLY)
+#				- Set to path of GNU autoconf autoscan
+#				  (default: according to USE_AUTOCONF_VER value)
+# AUTOIFNAMES (READ-ONLY)
+#				- Set to path of GNU autoconf autoifnames
+#				  (default: according to USE_AUTOCONF_VER value)
+# AUTOCONF_DIR (READ-ONLY)
+#				- Set to path of GNU autoconf shared directory (default:
+#				  according to USE_AUTOCONF_VER value)
 # USE_LIBTOOL	- Says that the port uses Libtool.  Implies GNU_CONFIGURE.
 # LIBTOOL		- Set to path of libtool (default: libtool).
 # LIBTOOLFILES	- Files to patch for libtool (defaults: "aclocal.m4" if
@@ -209,8 +229,16 @@ FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
 #				  Use this if you need to replace "#!" lines in scripts.
 # PERL_VERSION	- Full version of perl5 (see below for current value).
 # PERL_VER		- Short version of perl5 (see below for current value).
+# PERL_LEVEL	- Perl version as an integer of the form MNNNPP, where
+#					M is major version, N is minor version, and P is
+#					the patch level. E.g., PERL_VERSION=5.6.1 would give
+#					a PERL_LEVEL of 500601. This can be used in comparisons
+#					to determine if the version of perl is high enough,
+#					whether a particular dependency is needed, etc.
 # PERL_ARCH		- Directory name of architecture dependent libraries
 #				  (value: ${ARCH}-freebsd).
+# SITE_PERL		- Directory name where site specific perl packages go.
+#					This value is added to PLIST_SUB.
 # USE_BISON		- Says that the port uses bison for building.
 # USE_IMAKE		- Says that the port uses imake.  Implies USE_X_PREFIX.
 # XMKMF			- Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
@@ -878,36 +906,146 @@ BUILD_DEPENDS+=		unzip:${PORTSDIR}/archivers/unzip
 BUILD_DEPENDS+=		gmake:${PORTSDIR}/devel/gmake
 CONFIGURE_ENV+=	MAKE=${GMAKE}
 .endif
-.if defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER)
-USE_AUTOMAKE?=	yes
-USE_AUTOMAKE_VER?=	14
 
-USE_AUTOCONF=	yes
-.endif
-.if defined(USE_AUTOMAKE_VER)
-.if ${USE_AUTOMAKE_VER} == 15
-BUILD_DEPENDS+=		automake:${PORTSDIR}/devel/automake
+######################################################################
+# AUTOMAKE/AUTOCONF
+# current => non-renamed, non-relocated version
 
-ACLOCAL?=		aclocal
-AUTOMAKE?=		automake
-ACLOCAL_DIR?=		${LOCALBASE}/share/aclocal
-AUTOMAKE_DIR?=		${LOCALBASE}/share/automake
-.else
-BUILD_DEPENDS+=		automake14:${PORTSDIR}/devel/automake14
+########## private variables
+#	old_{am,ac}ver		==>	numeric version of "old" port[*]
+#	cur_{am,ac}ver		==>	numeric version of "current" port
+#	dev_{am,ac}ver		==>	numeric version of "devel" port
+#	use_{am,ac}path		==> numeric version we are using here
+#	{am,ac}path			==> path to non-suffixed binary, if any
+#	autotools_path		==> string to prepend to PATH, if any
+#
+# [*] "default" version in case of USE_AUTOMAKE or USE_AUTOCONF w/o version
 
-AUTOMAKE_ARGS+=		-i
-USE_AUTOCONF_VER?=	213
-.endif
-.endif
-.if defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER)
-USE_AUTOCONF?=	yes
-USE_AUTOCONF_VER?=	213
+##########
+#.if defined(AUTOMAKE) || defined(AUTOCONF)
+#BROKEN="AUTOMAKE and AUTOCONF are read-only values. \
+#	You may not assign to them"
+#.endif # defined(AUTOMAKE) || defined(AUTOCONF)
+
+########## versions
+old_amver=	14
+cur_amver=	15
+dev_amver=	17
+old_acver=	213
+cur_acver=	253
+dev_acver=	254
 
+########## automake setup
+.if defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER)
+USE_AUTOMAKE?=		yes
+USE_AUTOMAKE_VER?=	${old_amver}
+use_amver=			${USE_AUTOMAKE_VER:L}
+.if ${use_amver} == ${cur_amver}
+ACLOCAL_DIR=		${LOCALBASE}/share/aclocal
+AUTOMAKE_DIR=		${LOCALBASE}/share/automake
+BUILD_DEPENDS+=		automake:${PORTSDIR}/devel/automake
+USE_AUTOCONF_VER=	${cur_acver}
+.elif ${use_amver} == ${old_amver} || ${use_amver} == ${dev_amver}
+ACLOCAL_DIR=	${LOCALBASE}/share/aclocal${use_amver}
+AUTOMAKE_DIR=	${LOCALBASE}/share/automake${use_amver}
+BUILD_DEPENDS+=	automake${use_amver}:${PORTSDIR}/devel/automake${use_amver}
+ampath=			${LOCALBASE}/libexec/automake${use_amver}:
+.if ${use_amver} == ${old_amver}
+AUTOMAKE_ARGS+=	-i
+USE_AUTOCONF_VER=${old_acver}
+.else
+USE_AUTOCONF_VER=${dev_acver}
+.endif # ${use_amver} == ${old_amver}
+.else # bad automake version
+BROKEN="unknown AUTOMAKE version: ${USE_AUTOMAKE_VER}"
+.endif # ${use_amver} == ${cur_amver}
+.endif # defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER)
+
+########## autoconf setup
+.if defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER)
+USE_AUTOCONF?=		yes
+USE_AUTOCONF_VER?=	${old_acver}
+use_acver=			${USE_AUTOCONF_VER:L}
+.if ${use_acver} == ${cur_acver}
+AUTOCONF_DIR=		${LOCALBASE}/share/autoconf
+BUILD_DEPENDS+=		autoconf:${PORTSDIR}/devel/autoconf
+USE_AUTOCONF_VER=	${cur_acver}
+.elif ${use_acver} == ${old_acver} || ${use_acver} == ${dev_acver}
+AUTOCONF_DIR=	${LOCALBASE}/share/autoconf${use_acver}
+BUILD_DEPENDS+=	autoconf${use_acver}:${PORTSDIR}/devel/autoconf${use_acver}
+acpath=			${LOCALBASE}/libexec/autoconf${use_acver}
+.else # bad autoconf version
+BROKEN="unknown AUTOCONF version: ${USE_AUTOCONF_VER}"
+.endif # ${use_acver} == ${cur_acver}
+.endif # defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER)
+
+########## auto* ==> GNU 'configure'
+.if defined(USE_AUTOMAKE_VER) || defined(USE_AUTOCONF_VER)
 GNU_CONFIGURE=	yes
-.endif
-.if defined(USE_AUTOCONF_VER)
-BUILD_DEPENDS+=		autoconf213:${PORTSDIR}/devel/autoconf213
-.endif
+.endif # defined(USE_AUTOMAKE_VER) || defined(USE_AUTOCONF_VER)
+
+########## set up paths to tools
+.if defined(ampath)
+autotools_path=${ampath}${acpath}
+.elif defined(acpath)
+autotools_path=${acpath}
+.endif # defined(ampath)
+
+########## prefix to path, add to env vars
+.if defined(autotools_path)
+MAKE_ENV+=	PATH=${autotools_path}:${PATH}
+CONFIGURE_ENV+=	PATH=${autotools_path}:${PATH}
+SCRIPTS_ENV+=	PATH=${autotools_path}:${PATH}
+AUTOCONF_ENV+=	PATH=${autotools_path}:${PATH}
+AUTOMAKE_ENV+=	PATH=${autotools_path}:${PATH}
+AUTOTOOLS_ENV+=	PATH=${autotools_path}:${PATH}
+.endif # defined(autotools_path)
+
+########## set up automake "names"
+.if defined(use_amver)
+.if !defined(ampath)
+ACLOCAL?=	aclocal
+AUTOMAKE?=	automake
+.else # defined(ampath)
+ACLOCAL?=	${ampath:S/://}/aclocal
+AUTOMAKE?=	${ampath:S/://}/automake
+.endif # !defined(ampath)
+.endif # defined(use_amver)
+
+########## set up autoconf "names"
+.if defined(use_acver)
+.if !defined(acpath)
+AUTOCONF?=		autoconf
+AUTOHEADER?=	autoheader
+AUTOIFNAMES?=	ifnames
+AUTORECONF?=	autoreconf
+AUTOSCAN?=		autoscan
+AUTOUPDATE?=	autoupdate
+.else # defined(acpath)
+AUTOCONF?=		${acpath}/autoconf
+AUTOHEADER?=	${acpath}/autoheader
+AUTOIFNAMES?=	${acpath}/ifnames
+AUTORECONF?=	${acpath}/autoreconf
+AUTOSCAN?=		${acpath}/autoscan
+AUTOUPDATE?=	${acpath}/autoupdate
+.endif # !defined(acpath)
+.endif # defined(use_acver)
+
+########## stupid port error checking
+# Set all unset vars for the programs to ${FALSE}. This way
+# we can catch a certain class of port Makefile errors quickly.
+ACLOCAL?=	${FALSE}
+AUTOMAKE?=	${FALSE}
+AUTOCONF?=	${FALSE}
+AUTOHEADER?=${FALSE}
+AUTOIFNAMES?=${FALSE}
+AUTORECONF?=${FALSE}
+AUTOSCAN?=	${FALSE}
+AUTOUPDATE?=${FALSE}
+
+# END AUTOMAKE/AUTOCONF
+######################################################################
+
 .if defined(USE_LIBTOOL)
 GNU_CONFIGURE=	yes
 BUILD_DEPENDS+=		libtool:${PORTSDIR}/devel/libtool
@@ -1004,9 +1142,27 @@ PERL_VER?=		5.005
 PERL_ARCH?=		${ARCH}-freebsd
 .endif
 .endif
+
+.if !defined(PERL_LEVEL)
+perl_major=		${PERL_VERSION:C|^([1-9]+).*|\1|}
+_perl_minor=	00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
+perl_minor=		${_perl_minor:C|^.*(...)|\1|}
+.if ${perl_minor} >= 100
+perl_minor=		${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
+perl_patch=		${PERL_VERSION:C|^.*(..)|\1|}
+.else # ${perl_minor} < 100
+_perl_patch=	0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
+perl_patch=		${_perl_patch:C|^.*(..)|\1|}
+.endif # ${perl_minor} < 100
+PERL_LEVEL=	${perl_major}${perl_minor}${perl_patch}
+.endif # !defined(PERL_LEVEL)
+
+SITE_PERL?=	${LOCALBASE}/lib/perl5/site_perl/${PERL_VER}
+
 PLIST_SUB+=		PERL_VERSION=${PERL_VERSION} \
 				PERL_VER=${PERL_VER} \
-				PERL_ARCH=${PERL_ARCH}
+				PERL_ARCH=${PERL_ARCH} \
+				SITE_PERL=${SITE_PERL:S|^${LOCALBASE}/||}
 
 .if defined(PERL_CONFIGURE)
 USE_PERL5=	yes
@@ -1869,7 +2025,15 @@ XFREE86_HTML_MAN?=	no
 .endif
 .endif
 
-# Put this for down as possible so it will catch all PLIST_SUB definitions.
+DOCSDIR?=	${PREFIX}/share/doc/${PORTNAME}
+EXAMPLESDIR?=	${PREFIX}/share/examples/${PORTNAME}
+DATADIR?=	${PREFIX}/share/${PORTNAME}
+
+PLIST_SUB+=	DOCSDIR="${DOCSDIR:S,^${PREFIX}/,,}" \
+		EXAMPLESDIR="${EXAMPLESDIR:S,^${PREFIX}/,,}" \
+		DATADIR="${DATADIR:S,^${PREFIX}/,,}"
+
+# Put this as far down as possible so it will catch all PLIST_SUB definitions.
 
 .if defined(INSTALLS_SHLIB)
 LDCONFIG_DIRS?=	%%PREFIX%%/lib
@@ -1877,10 +2041,6 @@ LDCONFIG_PLIST!=	${ECHO_CMD} ${LDCONFIG_DIRS} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/
 LDCONFIG_RUNLIST!=	${ECHO_CMD} ${LDCONFIG_PLIST} | ${SED} -e "s!%D!${PREFIX}!g"
 .endif
 
-DOCSDIR?=	${PREFIX}/share/doc/${PORTNAME}
-EXAMPLESDIR?=	${PREFIX}/share/examples/${PORTNAME}
-DATADIR?=	${PREFIX}/share/${PORTNAME}
-
 .MAIN: all
 
 ################################################################