- Upgrade to 1.5.2-1;

- PBS can be provided by Torque;

- One more tip to configure astk-client.

4 files changed, 35 insertions, 12 deletions

diff --git a/cad/astk-serveur/Makefile b/cad/astk-serveur/Makefile
index b320e01ea6b1..43e019b7c82c 100644
--- a/cad/astk-serveur/Makefile
+++ b/cad/astk-serveur/Makefile
@@ -6,8 +6,8 @@
 #
 
 PORTNAME=	astk
-DISTVERSION=	1.5.0-1
-PORTREVISION=	2
+DISTVERSION=	1.5.2-1
+DISTVERSIONSUFFIX=	.noarch
 CATEGORIES=	cad
 MASTER_SITES=	http://www.code-aster.org/FICHIERS/
 .if !defined(CLIENT_SEUL)
@@ -15,7 +15,6 @@ PKGNAMESUFFIX=	-serveur
 .else
 PKGNAMESUFFIX=	-client
 .endif
-DISTNAME=	${PORTNAME}-${DISTVERSION}.noarch
 
 MAINTAINER=	ports@FreeBSD.org
 COMMENT?=	Graphical interface for Code_Aster (server side)
@@ -33,9 +32,6 @@ COMMENT?=	Graphical interface for Code_Aster (server side)
 # There exists a "logical" RUN_DEPENDS towards french/aster and french/eficas
 # for the server part, but it is not set to avoid circular dependences.
 RUN_DEPENDS+=	${SHELL_INSTALL_ASTER}:${PORTSDIR}/shells/${SHIADEP}
-.if defined(WITH_PBS) && !defined(CLIENT_SEUL)
-RUN_DEPENDS+=	${LOCALBASE}bin/pbs_tclsh:${PORTSDIR}/misc/pbs
-.endif
 
 USE_PYTHON=	yes
 NO_BUILD=	yes
@@ -60,6 +56,12 @@ PLIST_SUB=	ASTKDIR=${LINSTDIR}/ASTK_SERV SERV="" CLIENT="@comment "		\
 		vaster=${vaster}
 PATCH2RM=	conf/config bin/as_exec bin/as_serv lib/as_config.py	\
 		lib/as_exec.py conf/aster_profile.sh lib/as_system.py
+. if exists(${LOCALBASE}/sbin/pbs_server)
+WITH_PBS=	yes
+. endif
+. if defined(WITH_PBS)
+RUN_DEPENDS+=	qsub:${PORTSDIR}/sysutils/torque
+. endif
 .else
 RUN_DEPENDS+=	xterm:${PORTSDIR}/x11/xterm						\
 		wish${TK_VER}:${PORTSDIR}/x11-toolkits/tk${SHORT_TK_VER}
@@ -78,7 +80,7 @@ TCL_VER?=	${TK_VER}
 SHORT_TK_VER=	${TK_VER:S/.//}
 BWidget_VER=	1.7.0
 
-ASTER_VER=	9.0.0
+ASTER_VER=	9.1.0
 vaster=		STA${ASTER_VER:R}
 
 GIBI=		gibi2003
@@ -179,7 +181,7 @@ do-configure:
 # CLIENT_SEUL
 . for scripts in ${C_SCRIPTS}
 	@${REINPLACE_CMD} -e "s#?SHELL_EXECUTION?#${SHELL_INSTALL_ASTER}#"	\
-	-e "s#?HOME_ASTK?#${inst_dir}#"						\
+	-e "s#?HOME_ASTK?#${inst_dir}#;s#?ASTER_ROOT?#${PREFIX}/aster#"		\
 	-e "s#?WISH_EXE?#wish${TK_VER}#" ${WRKSRC}/${scripts}
 . endfor
 	@${REINPLACE_CMD} -e "s#GIBI#${GIBI}#"					\
@@ -189,6 +191,7 @@ do-configure:
 		-e "s#?XTERM?#${X11BASE}/bin/xterm#"				\
 		-e "s#?FULL_SERVER_NAME?#${SERVER_NAME}#"			\
 		-e "s#?SERVER_NAME?#${HOST_NAME}#"				\
+		-e "s#?ASTER_ROOT?#${PREFIX}/aster#"				\
 		-e "s#?EDITOR?#${WITH_ED}#" ${conf_dir}/config_serveurs
 	@${REINPLACE_CMD} -e "s#?XTERM?#${X11BASE}/bin/xterm#"			\
 		-e "s#?ASTER_VERSION?#${ASTER_VER}#"				\
@@ -199,7 +202,6 @@ do-configure:
 		${WRKSRC}/share/tkselecteur.tcl
 	@${REINPLACE_CMD} -e "s#%%unamesm%%#${unamesm}#"			\
 		${WRKSRC}/lib/ASTK/init.tcl
-	@${REINPLACE_CMD} -e 's|?ASTER_ROOT?|${PREFIX}/aster|' ${WRKSRC}/bin/astk
 .endif
 
 do-install:
diff --git a/cad/astk-serveur/distinfo b/cad/astk-serveur/distinfo
index 068be767f58b..bb1fc33bf401 100644
--- a/cad/astk-serveur/distinfo
+++ b/cad/astk-serveur/distinfo
@@ -1,3 +1,3 @@
-MD5 (astk-1.5.0-1.noarch.tar.gz) = ee37f0b8f155b906d39e59def130069e
-SHA256 (astk-1.5.0-1.noarch.tar.gz) = c865280387f4e7e5526f0bef726f88a83080165d189cd0e7da2d4950b9eb49a5
-SIZE (astk-1.5.0-1.noarch.tar.gz) = 404963
+MD5 (astk-1.5.2-1.noarch.tar.gz) = b50df13ecb74dbf60abc21cba7b8544c
+SHA256 (astk-1.5.2-1.noarch.tar.gz) = a7023684ec5bbbbf5a1355897f758c45755843c391598b4f449a0f93fc97bbed
+SIZE (astk-1.5.2-1.noarch.tar.gz) = 421318
diff --git a/cad/astk-serveur/files.client/pkg-message.in b/cad/astk-serveur/files.client/pkg-message.in
index ee9e50b3a203..a405a86ea706 100644
--- a/cad/astk-serveur/files.client/pkg-message.in
+++ b/cad/astk-serveur/files.client/pkg-message.in
@@ -12,6 +12,9 @@ ASTK utilise le protocole rcp/rsh, il faut donc l'activer (/etc/inetd.conf
 et ~/.rhosts) ; le paramètre --check passé à astk permet de vérifier votre
 configuration.
 
+ASTK lance xterm avec -display : il ne faut donc pas lancer Xorg avec
+-nolisten tcp
+
 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 
 Standard configuration files have been initialized in the directory
@@ -27,3 +30,6 @@ once Code_Aster has been installed on this machine, else:
 ASTK uses the rcp/rsh protocol: it must be configured (check /etc/inetd.conf
 and ~/.rhosts); if you launch astk with the parameter --check, it will check
 your configuration.
+
+ASTK launch xterm with -display: check that Xorg is not launched with
+-nolisten tcp
diff --git a/cad/astk-serveur/pkg-plist b/cad/astk-serveur/pkg-plist
index 8b58004f8d78..456b8fa903a0 100644
--- a/cad/astk-serveur/pkg-plist
+++ b/cad/astk-serveur/pkg-plist
@@ -196,12 +196,18 @@
 %%SERV%%%%ASTKDIR%%/lib/as_config.py
 %%SERV%%%%ASTKDIR%%/lib/as_config.pyc
 %%SERV%%%%ASTKDIR%%/lib/as_config.pyo
+%%SERV%%%%ASTKDIR%%/lib/as_etude.py
+%%SERV%%%%ASTKDIR%%/lib/as_etude.pyc
+%%SERV%%%%ASTKDIR%%/lib/as_etude.pyo
 %%SERV%%%%ASTKDIR%%/lib/as_exec.py
 %%SERV%%%%ASTKDIR%%/lib/as_exec.pyc
 %%SERV%%%%ASTKDIR%%/lib/as_exec.pyo
 %%SERV%%%%ASTKDIR%%/lib/as_job.py
 %%SERV%%%%ASTKDIR%%/lib/as_job.pyc
 %%SERV%%%%ASTKDIR%%/lib/as_job.pyo
+%%SERV%%%%ASTKDIR%%/lib/as_list.py
+%%SERV%%%%ASTKDIR%%/lib/as_list.pyc
+%%SERV%%%%ASTKDIR%%/lib/as_list.pyo
 %%SERV%%%%ASTKDIR%%/lib/as_maintenance.py
 %%SERV%%%%ASTKDIR%%/lib/as_maintenance.pyc
 %%SERV%%%%ASTKDIR%%/lib/as_maintenance.pyo
@@ -223,6 +229,9 @@
 %%SERV%%%%ASTKDIR%%/lib/as_timer.py
 %%SERV%%%%ASTKDIR%%/lib/as_timer.pyc
 %%SERV%%%%ASTKDIR%%/lib/as_timer.pyo
+%%SERV%%%%ASTKDIR%%/lib/as_utils.py
+%%SERV%%%%ASTKDIR%%/lib/as_utils.pyc
+%%SERV%%%%ASTKDIR%%/lib/as_utils.pyo
 %%SERV%%%%ASTKDIR%%/lib/astk_maintenance.py
 %%SERV%%%%ASTKDIR%%/lib/astk_maintenance.pyc
 %%SERV%%%%ASTKDIR%%/lib/astk_maintenance.pyo
@@ -237,12 +246,18 @@
 %%SERV%%%%ASTKDIR%%/lib/mystring.py
 %%SERV%%%%ASTKDIR%%/lib/mystring.pyc
 %%SERV%%%%ASTKDIR%%/lib/mystring.pyo
+%%SERV%%%%ASTKDIR%%/lib/progress.py
+%%SERV%%%%ASTKDIR%%/lib/progress.pyc
+%%SERV%%%%ASTKDIR%%/lib/progress.pyo
 %%SERV%%%%ASTKDIR%%/lib/schema.py
 %%SERV%%%%ASTKDIR%%/lib/schema.pyc
 %%SERV%%%%ASTKDIR%%/lib/schema.pyo
 %%SERV%%%%ASTKDIR%%/lib/stanley_post.comm
 %%SERV%%%%ASTKDIR%%/lib/sub_script
 %%SERV%%%%ASTKDIR%%/lib/sum_tps.awk
+%%SERV%%%%ASTKDIR%%/lib/user_filter.py
+%%SERV%%%%ASTKDIR%%/lib/user_filter.pyc
+%%SERV%%%%ASTKDIR%%/lib/user_filter.pyo
 %%SERV%%%%ASTKDIR%%/lib/utils.py
 %%SERV%%%%ASTKDIR%%/lib/utils.pyc
 %%SERV%%%%ASTKDIR%%/lib/utils.pyo