pancho - A perl script useful to configure Cisco devices via TFTP

PR:		ports/31734
Submitted by:	Nicolas Jombart <Nicolas.Jombart@hsc-labs.com>

7 files changed, 80 insertions, 0 deletions

diff --git a/net-mgmt/pancho/Makefile b/net-mgmt/pancho/Makefile
new file mode 100644
index 000000000000..c70867e8ba36
--- /dev/null
+++ b/net-mgmt/pancho/Makefile
@@ -0,0 +1,40 @@
+# New ports collection makefile for:    pancho
+# Date created:                         november 2nd, 2001
+# Whom: 				Nicolas Jombart <Nicolas.Jombart@hsc-labs.com>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	pancho
+PORTVERSION=	2.6
+CATEGORIES=	net
+MASTER_SITES=	http://pancho.lunarmedia.net/
+DISTNAME=	pancho-v2.6
+
+MAINTAINER=	Nicolas.Jombart@hsc-labs.com
+
+RUN_DEPENDS=    ${LOCALBASE}/lib/perl5/site_perl/${PERL_VER}/Net/SNMP.pm:${PORTSDIR}/net/p5-Net-SNMP
+
+NO_BUILD=	YES
+
+pre-patch:
+	@${MV} ${WRKSRC}/pancho ${WRKSRC}/pancho.old
+	@${SED} -e '1,1s:/usr/bin/perl:${PERL5}:' \
+		< ${WRKSRC}/pancho.old > ${WRKSRC}/pancho
+.if defined(WITH_PANCHO_LOGGING)
+	@${MV} ${WRKSRC}/pancho ${WRKSRC}/pancho.old
+	@${SED} -e '35,1s:logging = "":logging = "1":' \
+		< ${WRKSRC}/pancho.old > ${WRKSRC}/pancho
+.endif
+	@${RM} ${WRKSRC}/pancho.old
+
+do-install:
+	${INSTALL_SCRIPT} ${WRKSRC}/pancho ${PREFIX}/bin
+.if !defined(NOPORTDOCS)
+	${MKDIR} ${PREFIX}/share/doc/pancho
+.for i in README LOGGING
+	${INSTALL_DATA} ${WRKSRC}/${i} ${PREFIX}/share/doc/pancho
+.endfor
+.endif
+
+.include <bsd.port.mk>
diff --git a/net-mgmt/pancho/distinfo b/net-mgmt/pancho/distinfo
new file mode 100644
index 000000000000..6300ade0f036
--- /dev/null
+++ b/net-mgmt/pancho/distinfo
@@ -0,0 +1 @@
+MD5 (pancho-v2.6.tar.gz) = b806b9cdca03247a1200595254711dea
diff --git a/net-mgmt/pancho/files/patch-aa b/net-mgmt/pancho/files/patch-aa
new file mode 100644
index 000000000000..302d0f26475d
--- /dev/null
+++ b/net-mgmt/pancho/files/patch-aa
@@ -0,0 +1,11 @@
+--- pancho.orig	Sat Nov  3 16:12:13 2001
++++ pancho	Sat Nov  3 16:13:03 2001
+@@ -34,7 +34,7 @@
+ 
+ my $logging = "";	# set this to "1" to enable logging
+ 
+-my $logfile = "";	# full path to your logfile 
++my $logfile = $ENV{HOME}."/pancho.log";	# full path to your logfile 
+ 
+ ############ NO FURTHER EDITING SHOULD BE REQUIRED.    ############
+ ############ DOING SO IS AT YOUR OWN RISK.	       ############
diff --git a/net-mgmt/pancho/files/patch-ab b/net-mgmt/pancho/files/patch-ab
new file mode 100644
index 000000000000..79ef97212ce2
--- /dev/null
+++ b/net-mgmt/pancho/files/patch-ab
@@ -0,0 +1,10 @@
+--- LOGGING.orig	Sat Nov  3 16:26:20 2001
++++ LOGGING	Sat Nov  3 17:31:18 2001
+@@ -69,3 +69,7 @@
+ 
+     % touch /var/log/pancho
+     % chmod 600 /var/log/pancho
++
++Note: The FreeBSD port compiled with -DWITH_PANCHO_LOGGING enables
++logging into ~/pancho.log so the setuid bit isn't set.
++
diff --git a/net-mgmt/pancho/pkg-comment b/net-mgmt/pancho/pkg-comment
new file mode 100644
index 000000000000..f2259e2c34e1
--- /dev/null
+++ b/net-mgmt/pancho/pkg-comment
@@ -0,0 +1 @@
+Perl script useful to configure Cisco routers via TFTP
diff --git a/net-mgmt/pancho/pkg-descr b/net-mgmt/pancho/pkg-descr
new file mode 100644
index 000000000000..ca9959cf4262
--- /dev/null
+++ b/net-mgmt/pancho/pkg-descr
@@ -0,0 +1,14 @@
+Pancho was written with the goal of allowing network
+admnistrators make a change to a group of Cisco routers
+without being required to log into each host. 
+
+Pancho also provides the flexibility to allow admins to
+use its function against a single host, a select group
+or the entire whole. In addition to changes to current
+configurations on remote routers, pancho is also capable
+of archiving router configurations manually or through
+automated runs.
+
+WWW: http://pancho.lunarmedia.net/
+
+--Nicolas Jombart <Nicolas.Jombart@hsc-labs.com>
diff --git a/net-mgmt/pancho/pkg-plist b/net-mgmt/pancho/pkg-plist
new file mode 100644
index 000000000000..a5e94a3d5058
--- /dev/null
+++ b/net-mgmt/pancho/pkg-plist
@@ -0,0 +1,3 @@
+bin/pancho
+%%PORTDOCS%%share/doc/pancho/README
+%%PORTDOCS%%share/doc/pancho/LOGGING