o New port edonkey-core version 0.2000.15.16.58.0.2: eDonkey2000

  'core' command line client
o README.FreeBSD worked with pat

Reviewed by:	pat

8 files changed, 196 insertions, 0 deletions

diff --git a/net-p2p/linux-edonkey-core/Makefile b/net-p2p/linux-edonkey-core/Makefile
new file mode 100644
index 000000000000..550c7564338c
--- /dev/null
+++ b/net-p2p/linux-edonkey-core/Makefile
@@ -0,0 +1,57 @@
+# New ports collection makefile for:	eDonkey2000 'core' command line client
+# Date created:				Fri Jan 4 22:44:56 BRST 2002
+# Whom:			Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	edonkey
+PORTVERSION=	0.2000.15.16.58.0.2
+CATEGORIES=	net linux
+MASTER_SITES=	http://users.aber.ac.uk/tpm01/
+PKGNAMESUFFIX=	-core
+DISTNAME=	donkey_s_58test-2
+EXTRACT_SUFX=	.gz
+EXTRACT_ONLY=
+
+MAINTAINER=	lioux@FreeBSD.org
+
+ONLY_FOR_ARCHS=	i386
+USE_LINUX=	yes
+NO_WRKSUBDIR=	yes
+NO_BUILD=	yes
+STRIP=
+
+STRIP_CMD=	${LINUXBASE}/usr/bin/strip
+
+.if exists(/usr/bin/brandelf)
+BRANDELF?=	/usr/bin/brandelf
+.else
+BRANDELF?=	brandelf
+.endif
+
+BINARY_NAME=	donkey
+
+post-extract:
+	@${GZCAT} ${DISTDIR}/${DISTNAME}${EXTRACT_SUFX} > ${WRKSRC}/${BINARY_NAME}
+
+post-patch:
+	@${SED} -e "s|%%PREFIX%%|${PREFIX}|" ${FILESDIR}/wrapper.sh > \
+		${WRKDIR}/wrapper.sh
+
+pre-install:
+.if exists(${STRIP_CMD})
+	@${STRIP_CMD} ${WRKSRC}/${BINARY_NAME}
+.endif
+	@${BRANDELF} -t Linux ${WRKSRC}/${BINARY_NAME}
+
+do-install:
+	@${INSTALL_PROGRAM} ${WRKSRC}/${BINARY_NAME} ${PREFIX}/bin/${BINARY_NAME}-real
+	@${INSTALL_SCRIPT} ${WRKDIR}/wrapper.sh ${PREFIX}/bin/${BINARY_NAME}
+.ifndef(NOPORTDOCS)
+	@${MKDIR} ${DOCSDIR}${PKGNAMESUFFIX}
+	@${INSTALL_DATA} ${FILESDIR}/README.FreeBSD ${DOCSDIR}${PKGNAMESUFFIX}
+.endif
+	@${SED} s!/usr/local/share/doc/edonkey-core!${DOCSDIR}${PKGNAMESUFFIX}! ${PKGMESSAGE}
+
+.include <bsd.port.mk>
diff --git a/net-p2p/linux-edonkey-core/distinfo b/net-p2p/linux-edonkey-core/distinfo
new file mode 100644
index 000000000000..28c7fc8af2b7
--- /dev/null
+++ b/net-p2p/linux-edonkey-core/distinfo
@@ -0,0 +1 @@
+MD5 (donkey_s_58test-2.gz) = 072d816662a7d2cb9360861eca3424f9
diff --git a/net-p2p/linux-edonkey-core/files/README.FreeBSD b/net-p2p/linux-edonkey-core/files/README.FreeBSD
new file mode 100644
index 000000000000..8e5275788f25
--- /dev/null
+++ b/net-p2p/linux-edonkey-core/files/README.FreeBSD
@@ -0,0 +1,92 @@
+[ HELP file resumed from FAQ at
+  http://users.aber.ac.uk/tpm01/ed2k_tools/faq.html ]
+
+	Read the aforementioned FAQ for complete instructions.
+
+	1) You have to configure the 'core' client and add a password
+
+	Install the "net/edonkey-core" port and type 'donkey'
+from the command line and then typing 'pass username password' (and
+hitting ENTER). Once you are finished, type 'q' (ENTER) and 'y'
+(ENTER) to quit and make the core save its preferences.
+
+	Of course, username must be a username you desire; and,
+password, a password you want to use. These are for connecting to
+the 'core' client, not for anything else. Therefore, unless you
+want someone mischiefly connecting to your client, choose both
+carefully. :)
+
+	2) Start 'core' client prior to running any of the GUIs
+after you have setup a password
+
+	To start the core client to make it controllable via a GUI,
+type 'donkey - !' from the command line.
+
+	3) Run the GUI and connect to the core client
+
+	Install the port "net/edonkey-gui-gtk" or "net/edonkey-gui-java",
+whichever one you prefer. Next run 'ed2k_gui' (if you chose the GTK
+gui client) or 'edonkey2000-gui-java' (if you chose the Java gui
+client). The Java GUI still lacks many features but it can modify
+configuration parameters whereas the GTK has many features but
+cannot modify anything. Therefore, I would advise using both, each
+for what it is strong. The java one to configure and the GTK one
+for normal use.
+
+	Okay, the GUI starts and there is that 'connect to' dialog,
+now what do I do?
+
+	First of all, you'll need an edonkey core running somewhere.
+Usually this will be the computer you're running the GUI on. There
+should be a status message above the buttons that tell you if there
+is already a core running locally or not. If not, hit the 'spawn
+local donkey' button to start the edonkey2000 core program. Now the
+status message should change. If not, you'll have to start the core
+client manually (Refer to step #2).
+
+	Second, if you spawned the donkey core alright, you enter
+the admin username and password into the appropriate fields in the
+'connect to' dialog and hit the 'connect' button. Now the 'connect
+to' dialog should disappear and the GUI should be connected to the
+core. If this does not happen, there could be the following problems
+(also check the statusbar of the GUI main window for messages):
+
+  (a) If you have started the core manually, you forgot the '-'
+  option. Start it with 'donkey - !' from the command line.
+
+  (b) You're connecting to the wrong computer ('host'). This should
+  be 'localhost' by default.
+
+  (c) You're connecting to the wrong port on your computer. The
+  default GUI port can be set in the command line 'core' client via
+  the 'aport' command, but should be 4663 by default.
+
+  (d) You haven't set a username and/or password with the core
+  manually (Refer to step #1).
+
+  (e) Your username/password are wrong (run the core manually and
+  type the 'vo' command to see what they are set to).
+
+  (f) The 'connect to' dialog disappears, but nothing seems to
+  happen. Most notably, the options page shows 'pleasewait' as a
+  nickname: This happens if you connect to the core on the wrong
+  port, namely on the port the core uses as its _data_ port. Start
+  the core manually and type 'vo' to see what the admin port is.
+  Make sure the 'admin port' is different from the 'door port'
+  (=data port). If in doubt, type 'netstat -l' from the command
+  line to see on what ports the donkey is listening. It should be
+  one of those.
+
+  (g) If you're trying to control a GUI on a remote host, chances
+  are that there is a firewall between you and the remote host that
+  blocks all TCP connections on the admin port. If this is the case,
+  you have to check your firewall settings and allow these connections
+  or try a different port as an admin port.
+
+	Third, you're connected, and the options page does NOT show
+'pleasewait' as a nickname. This is a very good sign, meaning that
+the GUI and the core can actually talk to each other. Now you should
+be able to do whatever you want: Go to the servers page and connect
+to a server first. Then you can search and start to download things.
+If you right-click on the list-entries you'll get all the available
+actions. Don't forget to share! :)
diff --git a/net-p2p/linux-edonkey-core/files/wrapper.sh b/net-p2p/linux-edonkey-core/files/wrapper.sh
new file mode 100644
index 000000000000..46fd18de71cd
--- /dev/null
+++ b/net-p2p/linux-edonkey-core/files/wrapper.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+PREFIX="%%PREFIX%%"
+PROGRAM="${0}"
+DIRNAME=${HOME}/.edonkey2000-core
+
+if [ ! -d ${DIRNAME} ]
+then
+	mkdir -p ${DIRNAME}
+fi
+
+if [ ! -h ${DIRNAME}/${PROGRAM##*/} ]
+then
+	ln -sf ${PREFIX}/bin/${PROGRAM##*/}-real ${DIRNAME}/${PROGRAM##*/}
+fi
+
+echo " ${*} " | grep " \-createdironly " ||
+{
+	cd ${DIRNAME} &&
+	echo Running under ${DIRNAME} &&
+	exec ./${PROGRAM##*/} ${*} ||
+	echo PROBLEM. Cannot create directory ${DIRNAME}, make sure you have the proper permissions to create it and try again
+}
diff --git a/net-p2p/linux-edonkey-core/pkg-comment b/net-p2p/linux-edonkey-core/pkg-comment
new file mode 100644
index 000000000000..ee94e3fad6f4
--- /dev/null
+++ b/net-p2p/linux-edonkey-core/pkg-comment
@@ -0,0 +1 @@
+eDonkey2000 'core' command line client
diff --git a/net-p2p/linux-edonkey-core/pkg-descr b/net-p2p/linux-edonkey-core/pkg-descr
new file mode 100644
index 000000000000..16c9c6962ea4
--- /dev/null
+++ b/net-p2p/linux-edonkey-core/pkg-descr
@@ -0,0 +1,10 @@
+The eDonkey2000 'core' is the actual edonkey program which does
+everything behind the scenes - connecting to servers, searching,
+downloading, uploading, all that stuff.
+
+The 'core' comes with a very simple text interface (=command line
+client), where you can tell it what to do by typing in commands.
+
+Check http://www.edonkey2000.com/ and the WWW site below.
+
+WWW: http://users.aber.ac.uk/tpm01/guihome.html
diff --git a/net-p2p/linux-edonkey-core/pkg-message b/net-p2p/linux-edonkey-core/pkg-message
new file mode 100644
index 000000000000..49bb236a9a3b
--- /dev/null
+++ b/net-p2p/linux-edonkey-core/pkg-message
@@ -0,0 +1,8 @@
+	ATTENTIONATTENTION:
+
+Please make sure that you read
+/usr/local/share/doc/edonkey-core/README.FreeBSD.
+It contains important information about both configuring and running
+edonkey2000 under FreeBSD. You will have problems running it if you
+do not read it.
+
diff --git a/net-p2p/linux-edonkey-core/pkg-plist b/net-p2p/linux-edonkey-core/pkg-plist
new file mode 100644
index 000000000000..3f5b8784978a
--- /dev/null
+++ b/net-p2p/linux-edonkey-core/pkg-plist
@@ -0,0 +1,4 @@
+bin/donkey
+bin/donkey-real
+%%PORTDOCS%%share/doc/edonkey-core/README.FreeBSD
+%%PORTDOCS%%@dirrm share/doc/edonkey-core