Add port entry for the base system LPR sources.

When world is installed w/ WITHOUT_LPR, they will not be present. Like
the compat packages this allows it to be added back in; this also supports
novel uses like using pfSense to build an embedded print server.

FYI: For raw queue use, bsd lpd's footprint is a few 100k on disk; cups
is ~12MB.

Reviewed by:	dougb

7 files changed, 252 insertions, 0 deletions

diff --git a/print/Makefile b/print/Makefile
index c38e4379dd98..c299b4031063 100644
--- a/print/Makefile
+++ b/print/Makefile
@@ -36,6 +36,7 @@
     SUBDIR += bjfilters600
     SUBDIR += bjfilters630
     SUBDIR += bjfilters6300
+    SUBDIR += bsd_lpr
     SUBDIR += c2ps-a4
     SUBDIR += c2ps-letter
     SUBDIR += catdvi
diff --git a/print/bsd_lpr/Makefile b/print/bsd_lpr/Makefile
new file mode 100644
index 000000000000..a39a81e4e9c2
--- /dev/null
+++ b/print/bsd_lpr/Makefile
@@ -0,0 +1,121 @@
+# New ports collection makefile for:	bsd_lpr
+# Date created:		7th February 2010
+# Whom:			Bruce M Simpson <bms@FreeBSD.org>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	bsd_lpr
+PORTVERSION=	2010020702
+CATEGORIES=	print
+MASTER_SITES=	${MASTER_SITE_LOCAL}
+MASTER_SITE_SUBDIR=	bms
+DISTNAME=	bsd_lpr-${PORTVERSION}
+
+MAINTAINER=	bms@FreeBSD.org
+COMMENT=	BSD lpr suite
+
+CONFLICTS=	cups-base-[0-9]* LPRng-[0-9]*
+
+USE_BZIP2=	yes
+MAKE_JOBS_SAFE=	defined
+
+OPTIONS=	\
+	INET6	 "Build with IPv6 support" On
+
+USE_RC_SUBR=	bsd_lpd
+SUB_FILES+=	pkg-message
+
+#
+# To roll snapshot: as bms: make BOOTSTRAP=defined fetch
+#
+.if defined(BOOTSTRAP)
+FETCH_DEPENDS+=	svn:${PORTSDIR}/devel/subversion
+SVN_REV=	202921		# svn tip at epoch 2010020702
+SVNROOT_URI=	svn://svn.freebsd.org/base
+SVN_BRANCH=	stable/8
+SVN_SUBDIR=	usr.sbin/lpr
+
+do-fetch:
+	${MKDIR} ${WRKDIR}
+	svn export -r ${SVN_REV} ${SVNROOT_URI}/${SVN_BRANCH}/${SVN_SUBDIR} ${WRKSRC}
+	cd ${WRKDIR}; tar cvfy ${DISTDIR}/${DISTNAME}.tar.bz2 ${DISTNAME}
+.if ${USER} == bms
+	${CHMOD} ugo+r ${DISTDIR}/${DISTNAME}.tar.bz2
+	scp -p ${DISTDIR}/${DISTNAME}.tar.bz2 \
+	    freefall.freebsd.org:public_distfiles/
+.endif
+.endif # defined(BOOTSTRAP)
+
+PLIST_FILES=\
+	sbin/chkprintcap \
+	sbin/lp \
+	sbin/lpc \
+	sbin/lpd \
+	sbin/lpq \
+	sbin/lpr \
+	sbin/lprm \
+	sbin/lptest \
+	sbin/pac \
+	sbin/lpf \
+	sbin/bjc-240.sh.sample
+
+LPR_SUBST_FILES=	${WRKSRC}/common_source/pathnames.h
+
+.if defined(WITHOUT_INET6)
+MAKE_ARGS+=	WITHOUT_INET6_SUPPORT=defined
+.endif
+
+MAKE_ARGS+=\
+	BINDIR="${PREFIX}/sbin" \
+	SHAREDIR="${PREFIX}/share" \
+	MANDIR="${MANPREFIX}/man/man"
+
+.if !defined(NOPORTDOCS) && !defined(NO_INSTALL_MANPAGES)
+MANCOMPRESSED=	yes
+MAN1=	lp.1 lpq.1 lpr.1 lprm.1 lptest.1
+MAN5=	printcap.5
+MAN8=	chkprintcap.8 lpc.8 lpd.8 pac.8
+
+LPR_SUBST_FILES+=\
+	${WRKSRC}/lp/lp.1 \
+	${WRKSRC}/lpq/lpq.1 \
+	${WRKSRC}/lpr/lpr.1 \
+	${WRKSRC}/lprm/lprm.1 \
+	${WRKSRC}/lptest/lptest.1 \
+	${WRKSRC}/lpr/printcap.5 \
+	${WRKSRC}/chkprintcap/chkprintcap.8 \
+	${WRKSRC}/lpc/lpc.8 \
+	${WRKSRC}/lpd/lpd.8 \
+	${WRKSRC}/pac/pac.8
+.else
+NOMAN=		defined
+MAKE_ARGS+=	WITHOUT_MAN=defined
+.endif
+
+.include <bsd.port.pre.mk>
+
+.if ${OSVERSION} < 800107
+IGNORE=		unsupported on FreeBSD versions prior to 8.0-RELEASE
+.endif
+
+# XXX clobbering ETCDIR
+ETCDIR=	${PREFIX}/etc
+
+post-patch:
+	@${TOUCH} ${WRKDIR}/Makefile.inc
+	@${REINPLACE_CMD} -e \
+	    's!/etc/printcap!${ETCDIR}/printcap!g ; \
+	     s!/usr/sbin!${PREFIX}/sbin!g' \
+	    ${LPR_SUBST_FILES}
+
+do-install:
+	@(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
+.if !defined(NOPORTDOCS) && !defined(NO_INSTALL_MANPAGES)
+	@(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} maninstall)
+.endif
+
+post-install:
+	@${CAT} ${PKGMESSAGE}
+
+.include <bsd.port.post.mk>
diff --git a/print/bsd_lpr/distinfo b/print/bsd_lpr/distinfo
new file mode 100644
index 000000000000..9d97f16cc2db
--- /dev/null
+++ b/print/bsd_lpr/distinfo
@@ -0,0 +1,3 @@
+MD5 (bsd_lpr-2010020702.tar.bz2) = f22991564bb47d4dba00e6c3acc4cf05
+SHA256 (bsd_lpr-2010020702.tar.bz2) = 51681e56f51da12b0cdf0a72bc0954320ccca9acb6b90e35f0521429c77bea03
+SIZE (bsd_lpr-2010020702.tar.bz2) = 105394
diff --git a/print/bsd_lpr/files/bsd_lpd.in b/print/bsd_lpr/files/bsd_lpd.in
new file mode 100644
index 000000000000..8d3adf9f1f6a
--- /dev/null
+++ b/print/bsd_lpr/files/bsd_lpd.in
@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: bsd_lpd
+# REQUIRE: DAEMON
+# BEFORE:  LOGIN
+# KEYWORD: shutdown
+
+. /etc/rc.subr
+
+name="bsd_lpd"
+rcvar=`set_rcvar`
+command="%%PREFIX%%/sbin/lpd"
+required_files="%%PREFIX%%/etc/printcap"
+start_precmd="bsd_chkprintcap"
+
+bsd_chkprintcap()
+{
+	if checkyesno bsd_chkprintcap_enable ; then
+		%%PREFIX%%/sbin/chkprintcap ${chkprintcap_flags}
+	fi
+}
+
+load_rc_config $name
+run_rc_command "$1"
diff --git a/print/bsd_lpr/files/patch-lpr-as-port b/print/bsd_lpr/files/patch-lpr-as-port
new file mode 100644
index 000000000000..aa427568e898
--- /dev/null
+++ b/print/bsd_lpr/files/patch-lpr-as-port
@@ -0,0 +1,76 @@
+--- Makefile.orig	2010-02-07 03:08:55.000000000 +0000
++++ Makefile	2010-02-07 03:09:01.000000000 +0000
+@@ -1,7 +1,7 @@
+ # $FreeBSD: /tmp/pcvs/ports/print/bsd_lpr/files/Attic/patch-lpr-as-port,v 1.1 2010-02-08 14:52:39 bms Exp $
+ 
+ SUBDIR=	common_source chkprintcap lp lpc lpd lpq lpr lprm lptest pac \
+-	filters filters.ru SMM.doc
++	filters filters.ru #SMM.doc
+ 
+ # Questions/ideas for lpr & friends could also be sent to:
+ #	freebsd-print@bostonradio.org
+--- SMM.doc/Makefile.orig	2004-10-24 16:33:08.000000000 +0100
++++ SMM.doc/Makefile	2010-02-07 03:08:45.000000000 +0000
+@@ -1,7 +1,7 @@
+ #	From: @(#)Makefile	8.1 (Berkeley) 6/8/93
+ # $FreeBSD: /tmp/pcvs/ports/print/bsd_lpr/files/Attic/patch-lpr-as-port,v 1.1 2010-02-08 14:52:39 bms Exp $
+ 
+-BINDIR=	/usr/share/doc
++BINDIR=	${PREFIX}/share/doc
+ VOLUME=	smm/07.lpd
+ SRCS=	0.t 1.t 2.t 3.t 4.t 5.t 6.t 7.t
+ MACROS=	-ms
+--- filters/Makefile.orig	2006-03-09 19:52:44.000000000 +0000
++++ filters/Makefile	2010-02-07 03:08:45.000000000 +0000
+@@ -1,7 +1,7 @@
+ #	@(#)Makefile	8.1 (Berkeley) 6/6/93
+ # $FreeBSD: /tmp/pcvs/ports/print/bsd_lpr/files/Attic/patch-lpr-as-port,v 1.1 2010-02-08 14:52:39 bms Exp $
+ 
+-BINDIR=	/usr/libexec/lpr
++BINDIR=	${PREFIX}/libexec/lpr
+ 
+ PROG=	lpf
+ NO_MAN=
+--- lp/Makefile.orig	2001-07-20 07:20:32.000000000 +0100
++++ lp/Makefile	2010-02-07 03:08:45.000000000 +0000
+@@ -1,6 +1,6 @@
+ # $FreeBSD: /tmp/pcvs/ports/print/bsd_lpr/files/Attic/patch-lpr-as-port,v 1.1 2010-02-08 14:52:39 bms Exp $
+ 
+-BINDIR=	/usr/bin
++BINDIR=	${PREFIX}/bin
+ 
+ SCRIPTS=lp.sh
+ MAN=	lp.1
+--- lpq/Makefile.orig	2002-06-23 21:57:18.000000000 +0100
++++ lpq/Makefile	2010-02-07 03:08:45.000000000 +0000
+@@ -1,7 +1,7 @@
+ #	From: @(#)Makefile	8.1 (Berkeley) 6/6/93
+ # $FreeBSD: /tmp/pcvs/ports/print/bsd_lpr/files/Attic/patch-lpr-as-port,v 1.1 2010-02-08 14:52:39 bms Exp $
+ 
+-BINDIR=	/usr/bin
++BINDIR=	${PREFIX}/bin
+ 
+ PROG=	lpq
+ BINOWN=	root
+--- lpr/Makefile.orig	2002-06-23 21:57:18.000000000 +0100
++++ lpr/Makefile	2010-02-07 03:08:45.000000000 +0000
+@@ -3,7 +3,7 @@
+ 
+ .PATH: ${.CURDIR}/../common_source
+ 
+-BINDIR=	/usr/bin
++BINDIR=	${PREFIX}/bin
+ 
+ PROG=	lpr
+ MAN=	lpr.1 printcap.5
+--- lprm/Makefile.orig	2002-06-23 21:57:18.000000000 +0100
++++ lprm/Makefile	2010-02-07 03:08:45.000000000 +0000
+@@ -3,7 +3,7 @@
+ 
+ .PATH: ${.CURDIR}/../common_source
+ 
+-BINDIR=	/usr/bin
++BINDIR=	${PREFIX}/bin
+ 
+ PROG=	lprm
+ BINOWN=	root
diff --git a/print/bsd_lpr/files/pkg-message.in b/print/bsd_lpr/files/pkg-message.in
new file mode 100644
index 000000000000..268ff2e490cb
--- /dev/null
+++ b/print/bsd_lpr/files/pkg-message.in
@@ -0,0 +1,11 @@
+==================================================================
+
+To enable this package, please add the following to /etc/rc.conf,
+and create the file %%ETCDIR%%/printcap :-
+ bsd_lpd_enable="YES"
+ bsd_chkprintcap_enable="YES"
+
+All knobs documented in rc.conf(5) for lpd(8) should be valid for
+this package, however, they must be prefixed with 'bsd_' as above.
+
+==================================================================
diff --git a/print/bsd_lpr/pkg-descr b/print/bsd_lpr/pkg-descr
new file mode 100644
index 000000000000..a62bb257ad69
--- /dev/null
+++ b/print/bsd_lpr/pkg-descr
@@ -0,0 +1,13 @@
+This is a port of the BSD lpr sources.
+
+Like the compat ports, this allows lpr to be installed as a package,
+at a later date, even if the options were not built with the base
+FreeBSD system, i.e. when world was built and installed with WITHOUT_LPR
+defined in /etc/make.conf.
+
+It may also be of use to folk who are managing embedded systems.
+Currently it is used as a testbed for the OpenPrinting API with pfSense,
+to build a very tight embedded printing appliance.
+
+Bruce
+bms@FreeBSD.org