Syslog-ng 3.5.4.1 is production ready. Copy syslog-ng-devel to syslog-ng.

Submitted by:	Peter Czanik <czanik@balabit.hu> (syslog-ng upline)

3 files changed, 260 insertions, 0 deletions

diff --git a/sysutils/syslog-ng/files/pkg-message.in b/sysutils/syslog-ng/files/pkg-message.in
new file mode 100644
index 000000000000..2b5582660897
--- /dev/null
+++ b/sysutils/syslog-ng/files/pkg-message.in
@@ -0,0 +1,29 @@
+
+syslog-ng is now installed!  To replace FreeBSD's standard syslogd
+(/usr/sbin/syslogd), complete these steps:
+
+1. Create a configuration file named %%PREFIX%%/etc/syslog-ng.conf
+   (a sample named syslog-ng.conf.sample has been included in
+   %%PREFIX%%/etc). Note that this is a change in 2.0.2
+   version, previous ones put the config file in
+   %%PREFIX%%/etc/syslog-ng/syslog-ng.conf, so if this is an update
+   move that file in the right place
+
+2. Configure syslog-ng to start automatically by adding the following
+   to /etc/rc.conf:
+
+        syslog_ng_enable="YES"
+
+3. Prevent the standard FreeBSD syslogd from starting automatically by
+   adding a line to the end of your /etc/rc.conf file that reads:
+
+        syslogd_enable="NO"
+ 
+4. Shut down the standard FreeBSD syslogd:
+
+     kill `cat /var/run/syslog.pid`
+
+5. Start syslog-ng:
+
+     %%PREFIX%%/etc/rc.d/syslog-ng start
+
diff --git a/sysutils/syslog-ng/files/syslog-ng.conf.sample b/sysutils/syslog-ng/files/syslog-ng.conf.sample
new file mode 100644
index 000000000000..051cfc53f463
--- /dev/null
+++ b/sysutils/syslog-ng/files/syslog-ng.conf.sample
@@ -0,0 +1,185 @@
+@version:3.5
+
+#
+# This sample configuration file is essentially equilivent to the stock
+# FreeBSD /etc/syslog.conf file.
+#
+# $FreeBSD$
+#
+
+#
+# options
+#
+options { chain_hostnames(off); flush_lines(0); threaded(yes); };
+
+#
+# sources
+#
+source src { unix-dgram("/var/run/log");
+             unix-dgram("/var/run/logpriv" perm(0600));
+	     udp(); internal(); file("/dev/klog"); };
+
+#
+# destinations
+#
+destination messages { file("/var/log/messages"); };
+destination security { file("/var/log/security"); };
+destination authlog { file("/var/log/auth.log"); };
+destination maillog { file("/var/log/maillog"); };
+destination lpd-errs { file("/var/log/lpd-errs"); };
+destination xferlog { file("/var/log/xferlog"); };
+destination cron { file("/var/log/cron"); };
+destination debuglog { file("/var/log/debug.log"); };
+destination consolelog { file("/var/log/console.log"); };
+destination all { file("/var/log/all.log"); };
+destination newscrit { file("/var/log/news/news.crit"); };
+destination newserr { file("/var/log/news/news.err"); };
+destination newsnotice { file("/var/log/news/news.notice"); };
+destination slip { file("/var/log/slip.log"); };
+destination ppp { file("/var/log/ppp.log"); };
+destination console { file("/dev/console"); };
+destination allusers { usertty("*"); };
+#destination loghost { udp("loghost" port(514)); };
+
+#
+# log facility filters
+#
+filter f_auth { facility(auth); };
+filter f_authpriv { facility(authpriv); };
+filter f_not_authpriv { not facility(authpriv); };
+#filter f_console { facility(console); };
+filter f_cron { facility(cron); };
+filter f_daemon { facility(daemon); };
+filter f_ftp { facility(ftp); };
+filter f_kern { facility(kern); };
+filter f_lpr { facility(lpr); };
+filter f_mail { facility(mail); };
+filter f_news { facility(news); };
+filter f_security { facility(security); };
+filter f_user { facility(user); };
+filter f_uucp { facility(uucp); };
+filter f_local0 { facility(local0); };
+filter f_local1 { facility(local1); };
+filter f_local2 { facility(local2); };
+filter f_local3 { facility(local3); };
+filter f_local4 { facility(local4); };
+filter f_local5 { facility(local5); };
+filter f_local6 { facility(local6); };
+filter f_local7 { facility(local7); };
+
+#
+# log level filters
+#
+filter f_emerg { level(emerg); };
+filter f_alert { level(alert..emerg); };
+filter f_crit { level(crit..emerg); };
+filter f_err { level(err..emerg); };
+filter f_warning { level(warning..emerg); };
+filter f_notice { level(notice..emerg); };
+filter f_info { level(info..emerg); };
+filter f_debug { level(debug..emerg); };
+filter f_is_debug { level(debug); };
+
+#
+# program filters
+#
+filter f_ppp { program("ppp"); };
+filter f_slip { program("startslip"); };
+
+#
+# *.err;kern.warning;auth.notice;mail.crit		/dev/console
+#
+log { source(src); filter(f_err); destination(console); };
+log { source(src); filter(f_kern); filter(f_warning); destination(console); };
+log { source(src); filter(f_auth); filter(f_notice); destination(console); };
+log { source(src); filter(f_mail); filter(f_crit); destination(console); };
+
+#
+# *.notice;authpriv.none;kern.debug;lpr.info;mail.crit;news.err	/var/log/messages
+#
+log { source(src); filter(f_notice); filter(f_not_authpriv); destination(messages); };
+log { source(src); filter(f_kern); filter(f_debug); destination(messages); };
+log { source(src); filter(f_lpr); filter(f_info); destination(messages); };
+log { source(src); filter(f_mail); filter(f_crit); destination(messages); };
+log { source(src); filter(f_news); filter(f_err); destination(messages); };
+
+#
+# security.*						/var/log/security
+#
+log { source(src); filter(f_security); destination(security); };
+
+#
+# auth.info;authpriv.info				/var/log/auth.log
+log { source(src); filter(f_auth); filter(f_info); destination(authlog); };
+log { source(src); filter(f_authpriv); filter(f_info); destination(authlog); };
+
+#
+# mail.info						/var/log/maillog
+#
+log { source(src); filter(f_mail); filter(f_info); destination(maillog); };
+
+#
+# lpr.info						/var/log/lpd-errs
+#
+log { source(src); filter(f_lpr); filter(f_info); destination(lpd-errs); };
+
+#
+# ftp.info						/var/log/xferlog
+#
+log { source(src); filter(f_ftp); filter(f_info); destination(xferlog); };
+
+#
+# cron.*						/var/log/cron
+#
+log { source(src); filter(f_cron); destination(cron); };
+
+#
+# *.=debug						/var/log/debug.log
+#
+log { source(src); filter(f_is_debug); destination(debuglog); };
+
+#
+# *.emerg						*
+#
+log { source(src); filter(f_emerg); destination(allusers); };
+
+#
+# uncomment this to log all writes to /dev/console to /var/log/console.log
+# console.info						/var/log/console.log
+#
+#log { source(src); filter(f_console); filter(f_info); destination(consolelog); };
+
+#
+# uncomment this to enable logging of all log messages to /var/log/all.log
+# touch /var/log/all.log and chmod it to mode 600 before it will work
+# *.*							/var/log/all.log
+#
+#log { source(src); destination(all); };
+
+#
+# uncomment this to enable logging to a remote loghost named loghost
+# *.*							@loghost
+#
+#log { source(src); destination(loghost); };
+
+#
+# uncomment these if you're running inn
+# news.crit						/var/log/news/news.crit
+# news.err						/var/log/news/news.err
+# news.notice						/var/log/news/news.notice
+#
+#log { source(src); filter(f_news); filter(f_crit); destination(newscrit); };
+#log { source(src); filter(f_news); filter(f_err); destination(newserr); };
+#log { source(src); filter(f_news); filter(f_notice); destination(newsnotice); };
+
+#
+# !startslip
+# *.*							/var/log/slip.log
+#
+log { source(src); filter(f_slip); destination(slip); };
+
+#
+# !ppp
+# *.*							/var/log/ppp.log
+#
+log { source(src); filter(f_ppp); destination(ppp); };
diff --git a/sysutils/syslog-ng/files/syslog-ng.in b/sysutils/syslog-ng/files/syslog-ng.in
new file mode 100644
index 000000000000..804bf6ec36fa
--- /dev/null
+++ b/sysutils/syslog-ng/files/syslog-ng.in
@@ -0,0 +1,46 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: syslogd
+# REQUIRE: mountcritremote cleanvar ldconfig
+# BEFORE:  SERVERS
+
+#
+# Add the following line to /etc/rc.conf.local or /etc/rc.conf
+# to enable this service:
+#
+#syslog_ng_enable="YES"
+#syslog_ng_config="-u daemon"
+#syslog_ng_pid="/var/run/syslog-ng.pid"
+#
+
+syslog_ng_purgeklog=${syslog_ng_purgeklog-"NO"}
+
+. /etc/rc.subr
+
+name=syslog_ng
+rcvar=syslog_ng_enable
+
+command=%%PREFIX%%/sbin/syslog-ng
+required_files=%%PREFIX%%/etc/syslog-ng.conf
+extra_commands=reload
+
+if checkyesno syslog_ng_purgeklog; then
+	start_precmd="echo \"Purging klog(9)\" && sysctl -w kern.msgbuf_clear=1 $start_precmd";
+fi
+
+stop_postcmd=stop_postcmd
+
+load_rc_config $name
+
+: ${syslog_ng_enable:="NO"}
+pidfile=${syslog_ng_pid:-"/var/run/syslog.pid"}
+command_args="-p ${pidfile} ${syslog_ng_config}"
+
+stop_postcmd() {
+  rm -f $pidfile
+}
+
+run_rc_command "$1"