- Update to 0.8.2

PR:		129906
Submitted by:	Dominic Fandrey <kamikaze@bsdforen.de> (maintainer)

4 files changed, 96 insertions, 35 deletions

diff --git a/x11-drivers/input-wacom/Makefile b/x11-drivers/input-wacom/Makefile
index 3638f824c686..e935874af872 100644
--- a/x11-drivers/input-wacom/Makefile
+++ b/x11-drivers/input-wacom/Makefile
@@ -30,10 +30,11 @@ MAN4DIR=	man/man4
 WRKSRC=		${WRKDIR}
 
 PLIST_SUB+=	KMODDIR=${KMODDIR} \
-		XINPUTMODDIR=${XINPUTMODDIR}
+		XINPUTMODDIR=${XINPUTMODDIR} \
+		PORTTYPE=${PORTTYPE}
 SUB_LIST:=	${PLIST_SUB}
-SUB_FILES+=	pkg-message
-PKGMESSAGE=	${WRKDIR}/pkg-message
+SUB_FILES+=	pkg-message-${PORTTYPE}
+PKGMESSAGE=	${WRKDIR}/pkg-message-${PORTTYPE}
 
 XORG_CAT=	driver
 USE_XORG=	xi
@@ -49,14 +50,16 @@ OPTIONS=	UWACOMKLD "Install USB kernel module" On
 
 .if defined(WITH_UWACOMKLD)
 PLIST_SUB+=	UWACOMKLD="uwacom.ko"
+PORTTYPE=	usb
 .else
 PLIST_SUB+=	UWACOMKLD="@noinst UWACOMKLD uwacom.ko"
+PORTTYPE=	serial
 .endif
 
 do-configure:
 	@cd ${WRKDIR}/linuxwacom \
 		&& ${LN} -s ${DISTDIR}/${DIST_SUBDIR}/${LINUXWACOM}.tar.bz2 \
-		&& ${SETENV} PREFIX=${PREFIX} ./run_configure
+		&& ${SETENV} ${MAKE_ENV} ./run_configure
 
 do-build:
 .if defined(WITH_UWACOMKLD)
@@ -73,7 +76,7 @@ do-install:
 .endif
 	@${MKDIR} ${PREFIX}/${XINPUTMODDIR} ${PREFIX}/${MAN4DIR}
 	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/util/ \
-		&& ${GMAKE} install
+		&& ${SETENV} ${MAKE_ENV} ${GMAKE} install
 	@${INSTALL} ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/xdrv/wacom_drv.so \
 		${PREFIX}/${XINPUTMODDIR}/
 	@${INSTALL_MAN} ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/wacom.4x.gz \
@@ -84,11 +87,12 @@ plist: clean configure
 	@${TOUCH} ${PLIST}
 	@${RM} ${PLIST}
 	@cd ${WRKDIR}/linuxwacom \
-		&& ${SETENV} PREFIX=${WRKDIR}/plist ./run_configure
+		&& ${SETENV} ${MAKE_ENV} PREFIX=${WRKDIR}/plist ./run_configure
 	@${MKDIR} ${WRKDIR}/plist
-	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/util && ${GMAKE} install
+	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/util \
+		&& ${SETENV} ${MAKE_ENV} ${GMAKE} install
 	@cd ${WRKDIR}/linuxwacom \
-		&& ${SETENV} PREFIX=${PREFIX} ./run_configure
+		&& ${SETENV} ${MAKE_ENV} ./run_configure
 	@${FIND} ${WRKDIR}/plist/ -not -type d \
 		| ${SED} "s|${WRKDIR}/plist/||1" \
 		>> ${PLIST}
diff --git a/x11-drivers/input-wacom/files/pkg-message-serial.in b/x11-drivers/input-wacom/files/pkg-message-serial.in
new file mode 100644
index 000000000000..f64f53d181ce
--- /dev/null
+++ b/x11-drivers/input-wacom/files/pkg-message-serial.in
@@ -0,0 +1,12 @@
+To setup the wacom driver for X run the following commands as the root user:
+# %%PREFIX%%/etc/rc.d/wacom onesetup
+
+Now open your xorg.conf file and check weather the correct serial device
+was chosen. If you are using a USB to serial converter you might have
+to change it to cuaUX.
+
+You can clean up the Xorg configuration by running the following command
+before deinstalling:
+# %%PREFIX%%/etc/rc.d/wacom onecleanup
+
+Now (re)plug in your tablet and restart X.
diff --git a/x11-drivers/input-wacom/files/pkg-message.in b/x11-drivers/input-wacom/files/pkg-message-usb.in
index fdf3c418c99c..fdf3c418c99c 100644
--- a/x11-drivers/input-wacom/files/pkg-message.in
+++ b/x11-drivers/input-wacom/files/pkg-message-usb.in
diff --git a/x11-drivers/input-wacom/files/wacom.in b/x11-drivers/input-wacom/files/wacom.in
index 79c8c4357add..aa320ca85089 100644
--- a/x11-drivers/input-wacom/files/wacom.in
+++ b/x11-drivers/input-wacom/files/wacom.in
@@ -92,6 +92,34 @@ get_first() {
 }
 
 #
+# Returns the line numbers of lines matching the extended regular
+# expression $2 in the file $1.
+#
+# @param $1
+#	The file to get the line numbers from.
+# @param $2
+#	An extend regular expression.
+# @stdout
+#	The line numbers of lines matching $2.
+#
+get_all() {
+	local entry result IFS
+	IFS='
+'
+
+	result="$(/usr/bin/grep -Ein "$2" "$1")"
+
+	# No match.
+	if [ -z "$result" ]; then
+		return 1
+	fi
+
+	for entry in $result; {
+		echo "${entry%%:*}"
+	}
+}
+
+#
 # Returns the line number of the line before line number $2 that matches the
 # extended regular expression $3 in the file $1.
 #
@@ -171,44 +199,50 @@ get_behind() {
 
 #
 # Inserts a line at the end of a section of an Xorg configuration file.
-# Only works on the first matching section.
+# The insertion is done on all matching sections!
 #
 section_insert_line() {
-	local file section insert begin end length
+	local file section insert sections begin end length
 	file="$1"
 	section="$2"
 	insert="$3"
 
 	# Find the beginning of the section.
-	begin="$(get_first "$file" \
+	# Start with the last section to avoid moving sections around
+	# before something is inserted into them.
+	sections="$(get_all "$file" \
 		"^[[:space:]]*Section[[:space:]]+\"$section\"" \
+		| /usr/bin/sort -nr
 	)"
 
-	if [ -z "$begin" ]; then
+	if [ -z "$sections" ]; then
 		echo "Identifying section $section has failed." 1>&2
 		return 1
 	fi
 
-	# Find the end of the section.
-	end="$(get_behind "$file" "$begin" "^[[:space:]]*EndSection")"
+	for begin in $sections; {
 
-	if [ -z "$end" ]; then
-		echo "The section $section is not closed." 1>&2
-		return 2
-	fi
+		# Find the end of the section.
+		end="$(get_behind "$file" "$begin" "^[[:space:]]*EndSection")"
 
-	# Determine the length of the configuration file.
-	length="$(/usr/bin/wc -l "$file")"
-	length=${length% *}
+		if [ -z "$end" ]; then
+			echo "The section $section($begin) is not closed." 1>&2
+			return 2
+		fi
+
+		# Determine the length of the configuration file.
+		length="$(/usr/bin/wc -l "$file")"
+		length=${length% *}
 
-	# Insert the line.
-	/bin/cp "$file" "$file.$$"
+		# Insert the line.
+		/bin/cp "$file" "$file.$$"
 
-	/usr/bin/head -n$(($end - 1)) "$file.$$" > "$file"
-	echo "$insert" >> "$file"
-	/usr/bin/tail -n$(($length - $end + 1)) "$file.$$" >> "$file"
+		/usr/bin/head -n$(($end - 1)) "$file.$$" > "$file"
+		echo "$insert" >> "$file"
+		/usr/bin/tail -n$(($length - $end + 1)) "$file.$$" >> "$file"
 	
-	/bin/rm "$file.$$"
+		/bin/rm "$file.$$"
+	}
 }
 
 #
@@ -225,7 +259,7 @@ do_setup() {
 	echo "Setting up configuration in $config."
 
 	# Add all the necessary sections.
-	for ident in stylus eraser cursor pad touch; {
+	for ident in $(eval "echo \${${name}_types}"); {
 		if /usr/bin/grep -Eqi "^[[:space:]]*Identifier[[:space:]]+\"$ident\"" "$config"; then
 			echo "Skipping $ident, because it already exists in $config."
 			continue
@@ -236,10 +270,17 @@ do_setup() {
 		echo "Section \"InputDevice\"
 	Driver		\"wacom\"
 	Identifier	\"$ident\"
-	Option		\"Device\"	\"/dev/event0\"
-	Option		\"Type\"	\"$ident\"
-	Option		\"USB\"		\"on\"
-EndSection
+	Option		\"Type\"	\"$ident\"" >> "$config"
+
+	if [ "$(eval "echo \${${name}_porttype}")" = "usb" ]; then
+		echo "	Option		\"Device\"	\"/dev/event0\"
+	Option		\"USB\"		\"on\"" >> "$config"
+	else
+		echo "	Option		\"Device\"	\"/dev/ttyd0\"
+	Option		\"ForceDevice\"	\"ISDV4\"" >> "$config"
+	fi
+
+	echo "EndSection
 " >> "$config"
 
 		section_insert_line "$config" "ServerLayout" "	InputDevice	\"$ident\"	\"SendCoreEvents\""
@@ -318,13 +359,14 @@ do_cleanup() {
 
 	echo "Cleaning up ServerLayout section."
 
-	for ident in stylus eraser cursor pad touch; {
+	for ident in $(eval "echo \${${name}_types}"); {
+		while true; do
 		driver="$(get_first "$config" \
 			"[[:space:]]*InputDevice[[:space:]]+\"$ident\"" \
 		)"
 
 		# There is no line matching this driver.
-		test -z "$driver" && continue
+		test -z "$driver" && break 
 
 		# Determine the length of the configuration file.
 		length="$(/usr/bin/wc -l "$config")"
@@ -337,6 +379,7 @@ do_cleanup() {
 		/usr/bin/tail -n$(($length - $driver)) "$config.$$" >> "$config"
 	
 		/bin/rm "$config.$$"
+		done
 	}
 }
 
@@ -360,6 +403,8 @@ do_stop() {
 
 load_rc_config $name
 
-: ${wacom_enable="NO"}
+eval ": \${${name}_enable=\"NO\"}"
+eval ": \${${name}_types=\"stylus eraser cursor pad touch\"}"
+eval ": \${${name}_porttype=\"%%PORTTYPE%%\"}"
 
 run_rc_command "$1"