diff options
Diffstat (limited to 'dns')
37 files changed, 298 insertions, 175 deletions
diff --git a/dns/adsuck/files/pkg-message.in b/dns/adsuck/files/pkg-message.in index cc377f4315c1..608a3faed546 100644 --- a/dns/adsuck/files/pkg-message.in +++ b/dns/adsuck/files/pkg-message.in @@ -1,5 +1,6 @@ - - +[ +{ type: install + message: <<EOM Quick way to use adsuck chrooted in /var/adsuck mkdir /var/adsuck @@ -17,5 +18,6 @@ echo "nameserver 127.0.0.1" > /etc/resolv.conf If you're using DHCP consider configuring your dhclient.conf(5) to prevent resolv.conf updates. - - +EOM +} +] diff --git a/dns/bindgraph/pkg-message b/dns/bindgraph/pkg-message index 34faeed075ae..7484a16c5def 100644 --- a/dns/bindgraph/pkg-message +++ b/dns/bindgraph/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To get bindgraph working, you have to set querylog for bind. An example named.conf will be @@ -10,3 +13,6 @@ named.conf will be }; Make sure BINDGRAPH_USER (default www) can read this log file. +EOM +} +] diff --git a/dns/checkdns/files/pkg-message.in b/dns/checkdns/files/pkg-message.in index e44e163e4f29..b421700da7e6 100644 --- a/dns/checkdns/files/pkg-message.in +++ b/dns/checkdns/files/pkg-message.in @@ -1,8 +1,12 @@ - -------------------------------------------------------------------- - | >>> ATTENTION PLEASE <<< | - | | - | Please don't forget these : | - | - editing %%PREFIX%%/etc/checkdns.conf file ! | - | - copying checkdns.css file to Html Output Directory ! | - | | - -------------------------------------------------------------------- +[ +{ type: install + message: <<EOM + >>> ATTENTION PLEASE <<< + + Please don't forget these : + - editing %%PREFIX%%/etc/checkdns.conf file ! + - copying checkdns.css file to Html Output Directory ! + +EOM +} +] diff --git a/dns/cli53/pkg-message b/dns/cli53/pkg-message index bd48b2ebc3b8..e9d208f429b3 100644 --- a/dns/cli53/pkg-message +++ b/dns/cli53/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Please configure your AWS credentials, either through environment variables or ~/.aws/credentials config file. @@ -17,3 +20,6 @@ You can switch between different sets in the credentials file by passing For example: cli53 list --profile my_profile +EOM +} +] diff --git a/dns/credns/pkg-message b/dns/credns/pkg-message index 8f63a4185dd7..9786a03f8b52 100644 --- a/dns/credns/pkg-message +++ b/dns/credns/pkg-message @@ -1,10 +1,12 @@ -************************************************************************** -* * -* To run credns from startup, add credns_enable="YES" * -* to your /etc/rc.conf * -* * -* Take good care when using credns commands, since they often need to * -* be executed as user dedicated to credns, in order for the files it * -* touches or creates to have the proper permissions. * -* * -************************************************************************** +[ +{ type: install + message: <<EOM + To run credns from startup, add credns_enable="YES" + to your /etc/rc.conf + + Take good care when using credns commands, since they often need to + be executed as user dedicated to credns, in order for the files it + touches or creates to have the proper permissions. +EOM +} +] diff --git a/dns/curvedns/files/pkg-message.in b/dns/curvedns/files/pkg-message.in index 9daef969e220..9e3a4dd04f20 100644 --- a/dns/curvedns/files/pkg-message.in +++ b/dns/curvedns/files/pkg-message.in @@ -1,5 +1,6 @@ -########################################################### - +[ +{ type: install + message: <<EOM To start using curvedns, finish the following tasks: ------- generate/install keys ----------------------------- @@ -29,5 +30,6 @@ # examples: dig @<curvedns-ip> auth-dom.example any drill <curvedns-ip> auth-dom.example any - -########################################################### +EOM +} +] diff --git a/dns/ddclient/files/pkg-message.in b/dns/ddclient/files/pkg-message.in index a320b5b7808b..226e65398842 100644 --- a/dns/ddclient/files/pkg-message.in +++ b/dns/ddclient/files/pkg-message.in @@ -1,5 +1,6 @@ -*********************************************************** - +[ +{ type: install + message: <<EOM To configure ddclient, edit the following file: %%PREFIX%%/etc/ddclient.conf @@ -14,5 +15,6 @@ daily regardless of IP changes add the following line to your /etc/periodic.conf daily_ddclient_force_enable="YES" - -*********************************************************** +EOM +} +] diff --git a/dns/ddns/files/pkg-message.in b/dns/ddns/files/pkg-message.in index 72ae93afa443..0d039f8a68fb 100644 --- a/dns/ddns/files/pkg-message.in +++ b/dns/ddns/files/pkg-message.in @@ -1,4 +1,6 @@ -======================================================================== +[ +{ type: install + message: <<EOM ddns configuration files were installed in the following directory: %%ETCDIR%% @@ -38,4 +40,6 @@ Then you can start a ddns daemon by issuing the following command: or %%PREFIX%%/etc/rc.d/ddns_client start -======================================================================== +EOM +} +] diff --git a/dns/dns2blackhole/pkg-message b/dns/dns2blackhole/pkg-message index 813b8ce6b66a..403583aadda2 100644 --- a/dns/dns2blackhole/pkg-message +++ b/dns/dns2blackhole/pkg-message @@ -1,9 +1,11 @@ -######################################################################## - +[ +{ type: install + message: <<EOM dns2blackhole Malware Prevention through Domain Blocking (Black Hole) Issue "man dns2blackhole" For configuration and usage information - -######################################################################## +EOM +} +] diff --git a/dns/dnscheckengine/files/pkg-message.in b/dns/dnscheckengine/files/pkg-message.in index 10a3212947b9..c7953d00e17f 100644 --- a/dns/dnscheckengine/files/pkg-message.in +++ b/dns/dnscheckengine/files/pkg-message.in @@ -1,11 +1,10 @@ -************************************************************************* -* _ _____ _____ _____ _ _ _____ ___ ___ _ _ * -* / \|_ _|_ _| ____| \ | |_ _|_ _/ _ \| \ | | * -* / _ \ | | | | | _| | \| | | | | | | | | \| | * -* / ___ \| | | | | |___| |\ | | | | | |_| | |\ | * -* /_/ \_\_| |_| |_____|_| \_| |_| |___\___/|_| \_| * -* * -************************************************************************* +[ +{ type: install + message: <<EOM + / \|_ _|_ _| ____| \ | |_ _|_ _/ _ \| \ | | + / _ \ | | | | | _| | \| | | | | | | | | \| | + / ___ \| | | | | |___| |\ | | | | | |_| | |\ | + /_/ \_\_| |_| |_____|_| \_| |_| |___\___/|_| \_| The DNSCheck software included in the port is the PERL-based engine and includes a command line utility that uses that engine in %%PREFIX%%/bin @@ -32,3 +31,6 @@ Academ Consulting Services http://www.stanbarber.com http://www.academ.com +EOM +} +] diff --git a/dns/dnscrypt-proxy2/files/pkg-message.in b/dns/dnscrypt-proxy2/files/pkg-message.in index ba894e3b62c3..9d5b29a5b6cf 100644 --- a/dns/dnscrypt-proxy2/files/pkg-message.in +++ b/dns/dnscrypt-proxy2/files/pkg-message.in @@ -1,4 +1,6 @@ -====================================================================== +[ +{ type: install + message: <<EOM Version 2 of dnscrypt-proxy is written in Go and therefore isn't capable of dropping privileges after binding to a low port on FreeBSD. @@ -56,4 +58,6 @@ Below are a few examples on how to redirect local connections from port If you are using local_unbound, DNSSEC is enabled by default. You should comment the "auto-trust-anchor-file" line or change dnscrypt-proxy to use servers with DNSSEC support only. -====================================================================== +EOM +} +] diff --git a/dns/dnsmasq-devel/files/pkg-message.in b/dns/dnsmasq-devel/files/pkg-message.in index 4ec9add459b7..adcbeb5d5375 100644 --- a/dns/dnsmasq-devel/files/pkg-message.in +++ b/dns/dnsmasq-devel/files/pkg-message.in @@ -1,7 +1,11 @@ +[ +{ type: install + message: <<EOM + To enable dnsmasq, edit %%PREFIX%%/etc/dnsmasq.conf and + set dnsmasq_enable="YES" in /etc/rc.conf[.local] -*** To enable dnsmasq, edit %%PREFIX%%/etc/dnsmasq.conf and -*** set dnsmasq_enable="YES" in /etc/rc.conf[.local] -*** -*** Further options and actions are documented inside -*** %%PREFIX%%/etc/rc.d/dnsmasq - + Further options and actions are documented inside + %%PREFIX%%/etc/rc.d/dnsmasq +EOM +} +] diff --git a/dns/dnsmasq/files/pkg-message.in b/dns/dnsmasq/files/pkg-message.in index 88a8ae592f96..931dec5f38c0 100644 --- a/dns/dnsmasq/files/pkg-message.in +++ b/dns/dnsmasq/files/pkg-message.in @@ -1,14 +1,18 @@ +[ +{ type: install + message: <<EOM + To enable dnsmasq, edit %%PREFIX%%/etc/dnsmasq.conf and + set dnsmasq_enable="YES" in /etc/rc.conf[.local] -*** To enable dnsmasq, edit %%PREFIX%%/etc/dnsmasq.conf and -*** set dnsmasq_enable="YES" in /etc/rc.conf[.local] -*** -*** Further options and actions are documented inside -*** %%PREFIX%%/etc/rc.d/dnsmasq - -*** SECURITY RECOMMENDATION -*** ~~~~~~~~~~~~~~~~~~~~~~~ -*** It is recommended to enable the wpad-related options -*** at the end of the configuration file (you may need to -*** copy them from the example file to yours) to fix -*** CERT Vulnerability VU#598349. + Further options and actions are documented inside + %%PREFIX%%/etc/rc.d/dnsmasq + SECURITY RECOMMENDATION + ~~~~~~~~~~~~~~~~~~~~~~~ + It is recommended to enable the wpad-related options + at the end of the configuration file (you may need to + copy them from the example file to yours) to fix + CERT Vulnerability VU#598349. +EOM +} +] diff --git a/dns/dnsmax-perl/pkg-message b/dns/dnsmax-perl/pkg-message index 91cd01e5da5b..d134aa8f1e55 100644 --- a/dns/dnsmax-perl/pkg-message +++ b/dns/dnsmax-perl/pkg-message @@ -1,5 +1,6 @@ -*************************************************************** - +[ +{ type: install + message: <<EOM The DNSMax update client has been installed. You will need a dynamic dns account from a DNSMax enabled provider. @@ -8,5 +9,6 @@ Providers: - www.thatip.com To set up your configuration, run dnsmax-perl - -*************************************************************** +EOM +} +] diff --git a/dns/dnsproxy/files/pkg-message.in b/dns/dnsproxy/files/pkg-message.in index 1434e9d15655..89433f9442f0 100644 --- a/dns/dnsproxy/files/pkg-message.in +++ b/dns/dnsproxy/files/pkg-message.in @@ -1,4 +1,6 @@ -********************************************************************** +[ +{ type: install + message: <<EOM To enable dnsproxy you need: 1) Enable dnsproxy in /etc/rc.conf with the following line: @@ -8,7 +10,6 @@ To enable dnsproxy you need: dnsproxy.conf.sample file. For more information see man dnsproxy(1) - -********************************************************************** - - +EOM +} +] diff --git a/dns/dsc/files/pkg-message.in b/dns/dsc/files/pkg-message.in index 2c8de6a11f57..5e6b7fe0f104 100644 --- a/dns/dsc/files/pkg-message.in +++ b/dns/dsc/files/pkg-message.in @@ -1,7 +1,9 @@ -########################################### - +[ +{ type: install + message: <<EOM Before you configure: To obtain MaxMind's GeoIP tables, install net/geoipupdate and run %%LOCALBASE%%/bin/geoipupdate manually. - -########################################### +EOM +} +] diff --git a/dns/dynip/pkg-message b/dns/dynip/pkg-message index 89aec54092d9..bb5880260cc7 100644 --- a/dns/dynip/pkg-message +++ b/dns/dynip/pkg-message @@ -1,9 +1,11 @@ -######################################################################## - +[ +{ type: install + message: <<EOM dynip Dynamic IP Address Updater Issue "man dynip" For set up and usage information - -######################################################################## +EOM +} +] diff --git a/dns/gdnsd3/pkg-message b/dns/gdnsd3/pkg-message index c54265435d9f..ee928e7b98c2 100644 --- a/dns/gdnsd3/pkg-message +++ b/dns/gdnsd3/pkg-message @@ -1,4 +1,6 @@ -************************************************************************ +[ +{ type: install + message: <<EOM As of version 3.0.0, gdnsd no longer has the ability to bind to privileged ports and then drop privileges. As a result, you must use mac_portacl to allow the gdnsd user to bind to 53 udp/tcp. @@ -24,5 +26,6 @@ kldload mac_portacl kldload accf_dns kldload accf_data service sysctl reload - -************************************************************************ +EOM +} +] diff --git a/dns/getdns/files/pkg-message.in b/dns/getdns/files/pkg-message.in index f1ee9be4ba6a..36eda9b9e57b 100644 --- a/dns/getdns/files/pkg-message.in +++ b/dns/getdns/files/pkg-message.in @@ -1,12 +1,18 @@ -*** -*** !!! IMPORTANT !!!! libgetdns needs a DNSSEC trust anchor! -*** -*** For the library to be able to perform DNSSEC, the root -*** trust anchor needs to be present in presentation format -*** in the file: -*** %%LOCALBASE%%/etc/unbound/root.key -*** -*** We recomend using unbound-anchor to retrieve and install -*** the root trust anchor like this: -*** su -m unbound -c /usr/local/sbin/unbound-anchor -*** +[ +{ type: install + message: <<EOM + + !!! IMPORTANT !!!! libgetdns needs a DNSSEC trust anchor! + + For the library to be able to perform DNSSEC, the root + trust anchor needs to be present in presentation format + in the file: + %%LOCALBASE%%/etc/unbound/root.key + + We recomend using unbound-anchor to retrieve and install + the root trust anchor like this: + su -m unbound -c /usr/local/sbin/unbound-anchor + +EOM +} +] diff --git a/dns/kadnode/pkg-message b/dns/kadnode/pkg-message index f7954db4d331..617527a20ba8 100644 --- a/dns/kadnode/pkg-message +++ b/dns/kadnode/pkg-message @@ -1,6 +1,12 @@ +[ +{ type: install + message: <<EOM In order to resolve domains using kadnode all over the system, add this line to your /etc/nsswitch.conf: hosts: kadnode dns If the hosts line already exists, just add kadnode before the dns entry. +EOM +} +] diff --git a/dns/knot-resolver/files/pkg-message.in b/dns/knot-resolver/files/pkg-message.in index adb121c11ba8..d72c09dbfc0a 100644 --- a/dns/knot-resolver/files/pkg-message.in +++ b/dns/knot-resolver/files/pkg-message.in @@ -1,5 +1,6 @@ -###################################################################### - +[ +{ type: install + message: <<EOM Please consult the documentation: - man kresd - https://knot-resolver.readthedocs.io/ @@ -9,5 +10,6 @@ If upgrading: - https://knot-resolver.readthedocs.io/en/stable/upgrading.html - -###################################################################### +EOM +} +] diff --git a/dns/knot2/files/pkg-message.in b/dns/knot2/files/pkg-message.in index 175006c9cda8..a11ffed7f5d3 100644 --- a/dns/knot2/files/pkg-message.in +++ b/dns/knot2/files/pkg-message.in @@ -1,5 +1,6 @@ -################################################################################ - +[ +{ type: install + message: <<EOM To start using Knot DNS, you should complete the following tasks: cp %%ETCDIR%%/knot.conf.sample %%ETCDIR%%/knot.conf @@ -15,6 +16,6 @@ When upgrading from 2.4.x read: - https://www.knot-dns.cz/docs/2.5/html/migration.html#upgrade-2-4-x-to-2-5-x - -################################################################################ - +EOM +} +] diff --git a/dns/mDNSResponder_nss/pkg-message b/dns/mDNSResponder_nss/pkg-message index a232498a8961..09bffe7f6012 100644 --- a/dns/mDNSResponder_nss/pkg-message +++ b/dns/mDNSResponder_nss/pkg-message @@ -1,6 +1,10 @@ -================================================================================ +[ +{ type: install + message: <<EOM To enable the mDNSResponder NSS module, update the hosts entry in /etc/nsswitch.conf by adding mdns, preferably between files and dns: hosts: files mdns dns -================================================================================ +EOM +} +] diff --git a/dns/mdnsd/pkg-message b/dns/mdnsd/pkg-message index e63520068bd3..0eeef1006d09 100644 --- a/dns/mdnsd/pkg-message +++ b/dns/mdnsd/pkg-message @@ -1,4 +1,10 @@ +[ +{ type: install + message: <<EOM To use: mdnsd 'unique name' 12.34.56.78 80 '/optionalpath' For example: mdnsd audiotron 192.168.123.195 80 '/index.asp' & +EOM +} +] diff --git a/dns/mydns-ng/files/pkg-message.in b/dns/mydns-ng/files/pkg-message.in index c6bd630bf2a3..e3e73329db69 100644 --- a/dns/mydns-ng/files/pkg-message.in +++ b/dns/mydns-ng/files/pkg-message.in @@ -1,4 +1,6 @@ -********************************************************************** +[ +{ type: install + message: <<EOM To get MyDNS working you will need to do some configuration, first you will need to create %%PREFIX%%/etc/mydns.conf based on the installed sample file. Following that you will need to setup your @@ -17,5 +19,6 @@ You can use %%DOCSDIR%%/contrib/admin.php to maintain MyDNS. If you are looking for the web interface for MyDNS, it's included in the MyDNS distribution as %%DOCSDIR%%/contrib/admin.php. See %%DOCSDIR%%/contrib/README for installation instructions. - -********************************************************************* +EOM +} +] diff --git a/dns/mydns/files/pkg-message.in b/dns/mydns/files/pkg-message.in index a4840bb5b715..9b2c8280f262 100644 --- a/dns/mydns/files/pkg-message.in +++ b/dns/mydns/files/pkg-message.in @@ -1,4 +1,6 @@ -********************************************************************** +[ +{ type: install + message: <<EOM To get MyDNS working you will need to do some configuration, first you will need to create %%PREFIX%%/etc/mydns.conf based on the installed sample file. Following that you will need to setup your @@ -11,4 +13,6 @@ as a template. Finally enable MyDNS by adding mydns_enable="YES" into your rc.conf. -********************************************************************* +EOM +} +] diff --git a/dns/noip/files/pkg-message.in b/dns/noip/files/pkg-message.in index 8246aa2b0bb3..1b8c40373b8e 100644 --- a/dns/noip/files/pkg-message.in +++ b/dns/noip/files/pkg-message.in @@ -1,4 +1,6 @@ -########################################################### +[ +{ type: install + message: <<EOM You must have a registered host with No-IP (www.noip.com) to use the noip Dynamic DNS Update Client (DUC). @@ -27,4 +29,6 @@ Refer to the following for more information: /usr/local/bin/noip2 --help /usr/local/share/doc/noip/README.FIRST -########################################################### +EOM +} +] diff --git a/dns/nsd/pkg-message b/dns/nsd/pkg-message index 048c29c57cdc..19b102abda8c 100644 --- a/dns/nsd/pkg-message +++ b/dns/nsd/pkg-message @@ -1,12 +1,14 @@ -************************************************************************** -* -* To run nsd from startup, add nsd_enable="YES" to your etc/rc.conf -* -* Starting with nsd version 4 the old nsdc control program has been -* replaced by nsd-control. This requires some manual setup with -* nsd-control-setup and editing of the config files. -* -* nsd-control is incompatible with nsdc so when that is used in scripts, -* these should be adapted -* -************************************************************************** +[ +{ type: install + message: <<EOM + To run nsd from startup, add nsd_enable="YES" to your etc/rc.conf + + Starting with nsd version 4 the old nsdc control program has been + replaced by nsd-control. This requires some manual setup with + nsd-control-setup and editing of the config files. + + nsd-control is incompatible with nsdc so when that is used in scripts, + these should be adapted +EOM +} +] diff --git a/dns/opendnssec2/files/pkg-message.in b/dns/opendnssec2/files/pkg-message.in index 389bde5fcb4d..549cc3b4f398 100644 --- a/dns/opendnssec2/files/pkg-message.in +++ b/dns/opendnssec2/files/pkg-message.in @@ -1,27 +1,31 @@ -###### -# A manual migration step is needed to migration from 1.4 to 2.0. -# -# First migrate to at least the 1.4.10 release if you have not already done -# so. -# -# Review the documentation on the OpenDNSSEC site. This can be -# updated in between releases to provide more help. Especially if -# you have tooling around OpenDNSSEC you should be aware that some -# command line utilities have changed. A fair amount of backward -# compatibility has been respected, but changes are present. -# -# The enforcer does require a full migration, as the internal database has -# been completely revised. See the documentation in -# %%DOCSDIR%%/1.4-2.0_db_convert/README.md for a description. -# -# Migration scripts are installed in %%DOCSDIR%%. -# -# The signer does not require any migration. Backward compatibility is -# respected from earlier 1.4 release. The signer should not require a -# full resign of your zone when upgrading, however if you decide to downgrade -# a full resign is required. -###### +[ +{ type: install + message: <<EOM + A manual migration step is needed to migration from 1.4 to 2.0. + + First migrate to at least the 1.4.10 release if you have not already done + so. + + Review the documentation on the OpenDNSSEC site. This can be + updated in between releases to provide more help. Especially if + you have tooling around OpenDNSSEC you should be aware that some + command line utilities have changed. A fair amount of backward + compatibility has been respected, but changes are present. + + The enforcer does require a full migration, as the internal database has + been completely revised. See the documentation in + %%DOCSDIR%%/1.4-2.0_db_convert/README.md for a description. + + Migration scripts are installed in %%DOCSDIR%%. + + The signer does not require any migration. Backward compatibility is + respected from earlier 1.4 release. The signer should not require a + full resign of your zone when upgrading, however if you decide to downgrade + a full resign is required. An HowTo is provided at <https://wiki.opendnssec.org/display/DOCS20/Quick+start+guide> +EOM +} +] diff --git a/dns/openresolv/files/pkg-message.in b/dns/openresolv/files/pkg-message.in index b17d948ce23a..e25daf854019 100644 --- a/dns/openresolv/files/pkg-message.in +++ b/dns/openresolv/files/pkg-message.in @@ -1,8 +1,9 @@ -================================================= - +[ +{ type: install + message: <<EOM To make sure openresolv runs correctly please symlink /etc/resolv.conf to %%PREFIX%%/etc/resolvconf/run/resolv.conf - -================================================= - +EOM +} +] diff --git a/dns/powerdns-recursor/files/pkg-message.in b/dns/powerdns-recursor/files/pkg-message.in index a5480fd56ad2..36e346d90979 100644 --- a/dns/powerdns-recursor/files/pkg-message.in +++ b/dns/powerdns-recursor/files/pkg-message.in @@ -1,5 +1,6 @@ - -******************************************************************* +[ +{ type: install + message: <<EOM If you want to use the powerdns recursor, you need the following line in /etc/rc.conf(.local) @@ -7,5 +8,6 @@ Configuration templates are available in %%PREFIX%%/etc/pdns as recursor.conf-dist. -******************************************************************* - +EOM +} +] diff --git a/dns/powerdns/files/pkg-message.in b/dns/powerdns/files/pkg-message.in index 70defb2b70dd..7ad5592d6161 100644 --- a/dns/powerdns/files/pkg-message.in +++ b/dns/powerdns/files/pkg-message.in @@ -1,5 +1,6 @@ - -******************************************************************* +[ +{ type: install + message: <<EOM Enable powerdns in /etc/rc.conf with the following line: pdns_enable="YES" @@ -9,12 +10,17 @@ A pdns.conf with all possible options is available in %%EXAMPLESDIR%% - +EOM +} +{ type: upgrade + maximum_versio: 3.4 + message: <<EOM --------------------------------------------- IMPORTANT: PowerDNS Authoritive Server 3.4.0+: --------------------------------------------- This version needs a mandatory schema change for the gmsyql, gpgsql and gsqlite3 backends. SQL statements are available in %%DOCSDIR%% or http://doc.powerdns.com -******************************************************************* - +EOM +} +] diff --git a/dns/radns/files/pkg-message.in b/dns/radns/files/pkg-message.in index 8e6cf44d5520..c0307b41c3f8 100644 --- a/dns/radns/files/pkg-message.in +++ b/dns/radns/files/pkg-message.in @@ -1,5 +1,6 @@ -**************************************************** - +[ +{ type: install + message: <<EOM To enable radns, edit /etc/rc.conf and add: radns_enable="YES" @@ -9,5 +10,6 @@ own file %%PREFIX%%/etc/radns/radns-resolv.conf. To make sure the system's /etc/resolv.conf file is created from all sources, read %%PREFIX%%/share/doc/radns/README.FreeBSD. - -**************************************************** +EOM +} +] diff --git a/dns/rbldnsd/files/pkg-message.in b/dns/rbldnsd/files/pkg-message.in index 5eaa84203b17..fcea614b8e70 100644 --- a/dns/rbldnsd/files/pkg-message.in +++ b/dns/rbldnsd/files/pkg-message.in @@ -1,5 +1,6 @@ -======================================================================== - +[ +{ type: install + message: <<EOM The rbldnsd port has been installed with an example zone file, located in %%PREFIX%%/etc/rbldnsd/. @@ -13,5 +14,6 @@ or % nslookup -query=any 1.1.31.172.bl.example.com. localhost If you see a response that mentions 127.0.0.2, the install worked! - -======================================================================== +EOM +} +] diff --git a/dns/sleuth/pkg-message b/dns/sleuth/pkg-message index adedeb0e8cf6..5932f176156d 100644 --- a/dns/sleuth/pkg-message +++ b/dns/sleuth/pkg-message @@ -1,7 +1,9 @@ -============================================================ - +[ +{ type: install + message: <<EOM Before you can run "sleuth" you will need to copy ${PREFIX}etc/sleuth.conf.sample to ${PREFIX}etc/sleuth.conf - -============================================================ +EOM +} +] diff --git a/dns/unbound/files/pkg-message.in b/dns/unbound/files/pkg-message.in index eba979e3b205..94a1f3bc8975 100644 --- a/dns/unbound/files/pkg-message.in +++ b/dns/unbound/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Munin support requires additional configuration in the plugin config file: %%PREFIX%%/etc/munin/plugin-conf.d/plugins.conf @@ -8,3 +11,6 @@ env.unbound_conf %%PREFIX%%/etc/unbound/unbound.conf env.unbound_control %%PREFIX%%/sbin/unbound-control env.spoof_warn 1000 env.spoof_crit 100000 +EOM +} +] diff --git a/dns/void-zones-tools/files/pkg-message.in b/dns/void-zones-tools/files/pkg-message.in index ef5d20004008..690e2ee5df78 100644 --- a/dns/void-zones-tools/files/pkg-message.in +++ b/dns/void-zones-tools/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To download the host lists and convert them to void zones, run the following script: %%PREFIX%%/bin/void-zones-update.sh @@ -14,3 +17,6 @@ For future updates, run void-zones-update.sh and restart Unbound. For more information, see %%PREFIX%%/share/doc/void-zones-tools/README.md or https://github.com/cyclaero/void-zones-tools +EOM +} +] |