aboutsummaryrefslogtreecommitdiffstats
path: root/mail
diff options
context:
space:
mode:
Diffstat (limited to 'mail')
-rw-r--r--mail/exim-devel/Makefile30
-rw-r--r--mail/exim-devel/distinfo4
-rw-r--r--mail/exim-devel/files/patch-..::texinfo-3.30::doc::spec.texinfo40
-rw-r--r--mail/exim-devel/files/patch-scripts::exim_install28
-rw-r--r--mail/exim-devel/files/patch-src::EDITME163
-rw-r--r--mail/exim-devel/files/patch-src::configure.default55
-rw-r--r--mail/exim-devel/files/patch-src::exim.c20
-rw-r--r--mail/exim-devel/files/patch-src::filter.c31
-rw-r--r--mail/exim-devel/files/patch-src::smtp_in.c10
-rw-r--r--mail/exim-devel/files/patch-xxx::no_fsync103
-rw-r--r--mail/exim-devel/pkg-install4
-rw-r--r--mail/exim-devel/pkg-plist12
12 files changed, 134 insertions, 366 deletions
diff --git a/mail/exim-devel/Makefile b/mail/exim-devel/Makefile
index 5409d9731389..3c1c909cd7dc 100644
--- a/mail/exim-devel/Makefile
+++ b/mail/exim-devel/Makefile
@@ -6,18 +6,21 @@
#
PORTNAME= exim
-PORTVERSION= 3.33
-PORTREVISION= 6
+PORTVERSION= 3.951
CATEGORIES= mail
-MASTER_SITES= ftp://ftp.csx.cam.ac.uk/pub/software/email/exim/exim3/ \
- http://www.exim.org/ftp/exim3/ \
- ftp://ftp.is.co.za/networking/mail/transport/exim/exim3/
-DISTFILES= exim-3.33.tar.bz2 exim-texinfo-3.30.tar.bz2
+MASTER_SITES= ftp://ftp.csx.cam.ac.uk/pub/software/email/exim/Testing/ \
+ http://www.exim.org/ftp/Testing/ \
+ ftp://ftp.is.co.za/networking/mail/transport/exim/Testing/
+DISTFILES= exim-3.951.tar.bz2 exim-texinfo-3.951.tar.bz2
MAINTAINER= sheldonh@FreeBSD.org
+NO_LATEST_LINK= yes
+
USE_BZIP2= yes
+MAN8= exim.8
+
.if defined(NOPORTDOCS)
PKGMESSAGE= ${FILESDIR}/POST-INSTALL-NOTES
.endif
@@ -81,6 +84,10 @@ RUN_DEPENDS= ${LOCALBASE}/sbin/eximon:${PORTSDIR}/mail/exim-monitor
.include <bsd.port.pre.mk>
+PORTDOC_FILES= Exim3.upgrade Exim4.upgrade OptionLists.txt README \
+ dbm.discuss.txt exim.8 filter.txt pcre.txt pcretest.txt \
+ spec.txt
+
.if ${OSVERSION} < 400014
WITHOUT_IPV6= yes
.endif
@@ -183,7 +190,7 @@ do-configure:
${MKDIR} ${WRKSRC}/Local
${SED} ${SEDLIST} < ${WRKSRC}/src/EDITME > ${WRKSRC}/Local/Makefile
cd ${WRKSRC}/doc && \
- for i in ../../exim-texinfo-3.30/doc/* ; do \
+ for i in ../../exim-texinfo-3.951/doc/* ; do \
${LN} -sf $$i ; \
done
@@ -194,9 +201,12 @@ post-install:
.if !defined(NOPORTDOCS)
${MKDIR} ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${FILESDIR}/POST-INSTALL-NOTES ${PREFIX}/share/doc/exim
- ${INSTALL_DATA} ${WRKSRC}/doc/filter.txt ${PREFIX}/share/doc/exim
- ${INSTALL_DATA} ${WRKSRC}/doc/oview.txt ${PREFIX}/share/doc/exim
- ${INSTALL_DATA} ${WRKSRC}/doc/spec.txt ${PREFIX}/share/doc/exim
+.for file in ${PORTDOC_FILES}
+ ${INSTALL_DATA} ${WRKSRC}/doc/${file} ${PREFIX}/share/doc/exim
+.endfor
+.for file in ${MAN8}
+ ${INSTALL_MAN} ${WRKSRC}/doc/${file} ${PREFIX}/man/man8
+.endfor
.endif
@${CAT} ${PKGMESSAGE}
diff --git a/mail/exim-devel/distinfo b/mail/exim-devel/distinfo
index 5f3ac9e4caa8..53d5c6b10599 100644
--- a/mail/exim-devel/distinfo
+++ b/mail/exim-devel/distinfo
@@ -1,2 +1,2 @@
-MD5 (exim-3.33.tar.bz2) = d93a6f6387e18cf94c709f93c725b823
-MD5 (exim-texinfo-3.30.tar.bz2) = 6400cc7988036991b6bbe7ed9b4d9eeb
+MD5 (exim-3.951.tar.bz2) = 426b88630cd54659f770f88d48e90acb
+MD5 (exim-texinfo-3.951.tar.bz2) = 9b8b8e781a4ca338aee97d9feb4ac5b3
diff --git a/mail/exim-devel/files/patch-..::texinfo-3.30::doc::spec.texinfo b/mail/exim-devel/files/patch-..::texinfo-3.30::doc::spec.texinfo
deleted file mode 100644
index 8053631d6c83..000000000000
--- a/mail/exim-devel/files/patch-..::texinfo-3.30::doc::spec.texinfo
+++ /dev/null
@@ -1,40 +0,0 @@
---- ../exim-texinfo-3.30/doc/spec.texinfo.orig Tue Jun 12 12:20:49 2001
-+++ ../exim-texinfo-3.30/doc/spec.texinfo Mon Jun 18 17:50:02 2001
-@@ -6571,20 +6571,24 @@
-
-
- @cindex gid: caller
--@center aller_gid: The group id under which the process that called Exim was
-+$caller_gid:
-+The group id under which the process that called Exim was
- running. This is not the same as the group id of the originator of a message
- (see $originator_gid). If Exim re-execs itself, this variable in the new
- incarnation normally contains the Exim gid.
-
- @cindex uid: caller
--@center aller_uid: The user id under which the process that called Exim was
-+$caller_uid:
-+The user id under which the process that called Exim was
- running. This is not the same as the user id of the originator of a message
- (see $originator_uid). If Exim re-execs itself, this variable in the new
- incarnation normally contains the Exim uid.
-
--@center ompile_date: The date on which the Exim binary was compiled.
-+$compile_date:
-+The date on which the Exim binary was compiled.
-
--@center ompile_number: The building process for Exim keeps a count of the number
-+$compile_number:
-+The building process for Exim keeps a count of the number
- of times it has been compiled. This serves to distinguish different
- compilations of the same version of the program.
-
-@@ -6630,7 +6634,7 @@
- transport, the value is available in that transport. In all other situations,
- this variable expands to nothing.
-
-- rrmsg_recipient:
-+$errmsg_recipient:
- This is set to the recipient address of an error message while Exim is creating
- it. It is useful if a customized error message text file is in use (see
- chapter "Customizing error and warning messages").
diff --git a/mail/exim-devel/files/patch-scripts::exim_install b/mail/exim-devel/files/patch-scripts::exim_install
index db0bc1168f0a..1eeb130a08a9 100644
--- a/mail/exim-devel/files/patch-scripts::exim_install
+++ b/mail/exim-devel/files/patch-scripts::exim_install
@@ -1,23 +1,14 @@
-*) Causes the configure file to be installed as a sample only. The
- administrator needs to rename this file to "activate" exim.
-
---- scripts/exim_install.orig Mon Aug 2 17:43:03 1999
-+++ scripts/exim_install Tue Aug 3 14:31:20 1999
-@@ -199,25 +199,20 @@
- fi
- done
-
--
--
--# If there is no configuration file, install the default.
-+# Install only a sample configuration, which encourages the admin to look
-+# at it, since Exim won't run without a configure file.
+--- scripts/exim_install.orig Fri Nov 23 17:31:15 2001
++++ scripts/exim_install Tue Dec 18 22:23:28 2001
+@@ -293,30 +293,15 @@
echo $com ""
-if [ ! -f ${CONFIGURE_FILE} ]; then
- echo $com Installing default configuration in ${CONFIGURE_FILE}
- echo $com because there is no existing configuration file.
+- echo ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}`
+- ${real} ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}`
- echo ${CP} ../src/configure.default ${CONFIGURE_FILE}
- ${real} ${CP} ../src/configure.default ${CONFIGURE_FILE}
+ echo $com Installing default configuration file in ${CONFIGURE_FILE%/*}/configure.default
@@ -29,6 +20,15 @@
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
+- if [ ! -f /etc/aliases ]; then
+- echo $com '****'
+- echo $com Installing a dummy /etc/aliases file because you do not have
+- echo $com one, and the default configuration requires it. You should
+- echo $com edit /etc/aliases and at least create an alias for postmaster.
+- echo $com '***'
+- echo ${CP} ../src/aliases.default /etc/aliases
+- ${real} ${CP} ../src/aliases.default /etc/aliases
+- fi
-else
- echo $com Configuration file ${CONFIGURE_FILE} already exists
-fi
diff --git a/mail/exim-devel/files/patch-src::EDITME b/mail/exim-devel/files/patch-src::EDITME
index 2e25772f2520..7dfc0926d464 100644
--- a/mail/exim-devel/files/patch-src::EDITME
+++ b/mail/exim-devel/files/patch-src::EDITME
@@ -1,133 +1,96 @@
---- src/EDITME.orig Fri Jan 19 11:32:06 2001
-+++ src/EDITME Mon Jun 11 09:45:26 2001
-@@ -103,7 +103,7 @@
- # installed in this directory. There is no default for this variable built into
- # the source files; it must be set in one of the local configuration files.
+--- src/EDITME.orig Tue Dec 18 22:01:44 2001
++++ src/EDITME Tue Dec 18 22:11:42 2001
+@@ -95,7 +95,7 @@
+ # /usr/local/sbin. The installation script will try to create this directory,
+ # and any superior directories, if they do not exist.
-BIN_DIRECTORY=/usr/exim/bin
+BIN_DIRECTORY=XX_PREFIX_XX/sbin
- # The default distribution of Exim contains only the plain text form of the
-@@ -114,21 +114,21 @@
- # your info directory; "make install" will then build the info files and
- # install them there.
-
--# INFO_DIRECTORY=/usr/local/info
-+INFO_DIRECTORY=XX_PREFIX_XX/info
+ #------------------------------------------------------------------------------
+@@ -110,7 +110,7 @@
+ # directories if they don't exist. It will also install a default run time
+ # configuration if this file does not exist.
+-CONFIGURE_FILE=/usr/exim/configure
++CONFIGURE_FILE=XX_PREFIX_XX/etc/exim/configure
- # The compress command is used by the exicyclog script to compress old log
- # files. Both the name of the command and the suffix that it adds to files
- # need to be defined here. See also the EXICYCLOG_MAX configuration.
--COMPRESS_COMMAND=/opt/gnu/bin/gzip
-+COMPRESS_COMMAND=/usr/bin/gzip
- COMPRESS_SUFFIX=gz
+ #------------------------------------------------------------------------------
+@@ -123,8 +123,8 @@
+ # owner of a local mailbox.) Specifying these values as root is very strongly
+ # discouraged. These values are compiled into the binary.
+-EXIM_USER=
+-EXIM_GROUP=
++EXIM_USER=mailnull
++EXIM_GROUP=mail
- # If the exigrep utility is fed compressed log files, it tries to uncompress
- # them using this command.
+ # If the setting of EXIM_USER is numeric (e.g. EXIM_USER=42), there must
+ # also be a setting of EXIM_GROUP. If, on the other hand, you use a name
+@@ -266,8 +266,8 @@
+ # don't need to set LOOKUP_INCLUDE if the relevant directories are already
+ # specified in INCLUDE.
--ZCAT_COMMAND=/opt/gnu/bin/zcat
-+ZCAT_COMMAND=/usr/bin/zcat
+-# LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include
+-# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq
++LOOKUP_INCLUDE=XX_MYSQL_INCLUDE_XX XX_PGSQL_INCLUDE_XX XX_LDAP_INCLUDE_XX
++LOOKUP_LIBS=XX_MYSQL_LIBS_XX XX_PGSQL_LIBS_XX XX_LDAP_LIBS_XX
- # The runtime configuration file: This variable defines where Exim's runtime
-@@ -137,7 +137,7 @@
- # location of all other runtime files and directories can be changed in the
- # runtime configuration file.
+ #------------------------------------------------------------------------------
+@@ -278,7 +278,7 @@
+ # files are defaulted in the OS/Makefile-Default file, but can be overridden in
+ # local OS-specific make files.
--CONFIGURE_FILE=/usr/exim/configure
-+CONFIGURE_FILE=XX_PREFIX_XX/etc/exim/configure
+-EXIM_MONITOR=eximon.bin
++#EXIM_MONITOR=eximon.bin
- # In some installations there may be multiple machines sharing file systems,
-@@ -231,8 +231,8 @@
- # "security" setting, which controls how privilege is released (setuid vs
- # seteuid).
--# EXIM_UID=
--# EXIM_GID=
-+EXIM_UID=26
-+EXIM_GID=6
+@@ -312,7 +312,7 @@
+ # settings commented out.
+ # SUPPORT_TLS=yes
+-# TLS_LIBS=-lssl -lcrypto
++TLS_LIBS=-lssl -lcrypto
- # Compiling the Exim monitor: If you want to compile the Exim monitor,
-@@ -243,7 +243,7 @@
- # are defaulted in the OS/Makefile-Default file, and can be overridden
- # in local OS-specific make files.
+ # If you are running Exim as a server, note that just building it with TLS
+ # support is not all you need to do. You also need to set up a suitable
+@@ -354,7 +354,7 @@
+ # Once you have done this, "make install" will build the info files and
+ # install them in the directory you have defined.
--EXIM_MONITOR=eximon.bin
-+#EXIM_MONITOR=eximon.bin
+-# INFO_DIRECTORY=/usr/share/info
++INFO_DIRECTORY=XX_PREFIX_XX/info
- # Compiling in support for embedded Perl: If you want to be able to
-@@ -286,7 +286,7 @@
- # "panic", or "reject" to form the final file name. For example, some
- # installations may want something like this:
+ #------------------------------------------------------------------------------
+@@ -367,7 +367,7 @@
+ # %s. This will be replaced by one of the strings "main", "panic", or "reject"
+ # to form the final file names. Some installations may want something like this:
-# LOG_FILE_PATH=/var/log/exim_%slog
+LOG_FILE_PATH=/var/log/exim/%slog
# which results in files with names /var/log/exim_mainlog, etc. The directory
# in which the log files are placed must exist; Exim does not try to create
-@@ -352,6 +352,8 @@
-
- # LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include
- # LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq
-+LOOKUP_INCLUDE=XX_MYSQL_INCLUDE_XX XX_PGSQL_INCLUDE_XX XX_LDAP_INCLUDE_XX
-+LOOKUP_LIBS=XX_MYSQL_LIBS_XX XX_PGSQL_LIBS_XX XX_LDAP_LIBS_XX
+@@ -455,7 +455,7 @@
- # If you have set LDAP=yes, you should set LDAP_LIB_TYPE to indicate which LDAP
- # library you have. Unfortunately, though most of their functions are the
-@@ -365,6 +367,7 @@
- # LDAP_LIB_TYPE=OPENLDAP2
- # LDAP_LIB_TYPE=NETSCAPE
- # LDAP_LIB_TYPE=SOLARIS
-+LDAP_LIB_TYPE=XX_LDAP_TYPE_XX
+ # USE_TCP_WRAPPERS=yes
+ # CFLAGS=-O -I/usr/local/include
+-# EXTRALIBS_EXIM=-L/usr/local/lib -lwrap
++EXTRALIBS=XX_TCP_WRAPPERS_LIBS_XX XX_PAM_LIBS_XX
- # If you don't set any of these, Exim assumes the original University of
- # Michigan (OpenLDAP 1) library.
-@@ -411,7 +414,7 @@
- # the file name, allowing sites that run two separate daemons to distinguish
- # them. Some installations may want something like this
+ # but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
+ # as well.
+@@ -652,7 +652,7 @@
+ # (process id) to a file so that it can easily be identified. The path of the
+ # file can be specified here. Some installations may want something like this:
--# PID_FILE_PATH=/var/lock/exim%s.pid
-+PID_FILE_PATH=/var/run/exim%s.pid
+-# PID_FILE_PATH=/var/lock/exim.pid
++PID_FILE_PATH=/var/lock/exim%s.pid
# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
- # (see SPOOL_DIRECTORY below) with the name "exim-daemon.pid" for the standard
-@@ -460,7 +463,7 @@
- # uid and gid.
-
- # Many installations will want something like this:
--# SPOOL_DIRECTORY=/var/spool/exim
-+SPOOL_DIRECTORY=/var/spool/exim
-
- # Others may prefer to keep all Exim things under one directory:
- # SPOOL_DIRECTORY=/usr/exim/spool
-@@ -525,7 +528,7 @@
- # with TLS support.
-
- # SUPPORT_TLS=yes
--# TLS_LIBS=-lssl -lcrypto
-+TLS_LIBS=-lssl -lcrypto
-
- # If you are running Exim as a server, note that just building it with TLS
- # support is not usually all you need to do. You normally need to set up a
-@@ -575,5 +578,14 @@
- # chapter on building and installing Exim.
-
- # USE_TCP_WRAPPERS=yes
-+EXTRALIBS=XX_TCP_WRAPPERS_LIBS_XX XX_PAM_LIBS_XX
-+
-+
-+# IPv6 is coming. Exim has experimental support that has been tried out on
-+# one or two OS. See the file README.IPV6 for the current status of this
-+# support. Do not set this option unless you are working on IPv6 and know
-+# what you are doing.
-+
-+# HAVE_IPV6=yes
-
- # End of EDITME
+ # using the name "exim-daemon.pid".
diff --git a/mail/exim-devel/files/patch-src::configure.default b/mail/exim-devel/files/patch-src::configure.default
index 9b24cf348686..b913b1c91cd3 100644
--- a/mail/exim-devel/files/patch-src::configure.default
+++ b/mail/exim-devel/files/patch-src::configure.default
@@ -1,8 +1,8 @@
---- src/configure.default.orig Thu Jun 14 19:39:54 2001
-+++ src/configure.default Thu Jun 14 20:10:52 2001
-@@ -99,7 +99,9 @@
- # normal user. This isn't usually a problem, as most sites have an alias for
- # root that redirects such mail to a human administrator.
+--- src/configure.default.orig Fri Nov 23 17:31:16 2001
++++ src/configure.default Tue Dec 18 23:34:07 2001
+@@ -138,7 +138,9 @@
+ # were a normal user. This isn't usually a problem, as most sites have an alias
+ # for root that redirects such mail to a human administrator.
-never_users = root
+exim_user = mailnull
@@ -10,42 +10,33 @@
+never_users = root : mailnull
- # The use of your host as a mail relay by any host, including the local host
-@@ -122,6 +124,8 @@
- # See the section of the manual entitled "Control of relaying" for more
- # information.
-
-+host_accept_relay = 127.0.0.1
-+
-
# The setting below causes Exim to do a reverse DNS lookup on all incoming
- # IP calls, in order to get the true host name. If you feel this is too
-@@ -230,8 +234,8 @@
- delivery_date_add
- envelope_to_add
- return_path_add
--# group = mail
--# mode = 0660
-+ group = mail
-+ mode = 0660
-
-
- # This transport is used for handling pipe deliveries generated by alias
-@@ -300,7 +304,8 @@
- driver = aliasfile
- file = /etc/aliases
- search_type = lsearch
+@@ -343,7 +345,8 @@
+ allow_fail
+ allow_defer
+ data = ${lookup{$local_part}lsearch{/etc/aliases}}
-# user = exim
+ user = mailnull
+ group = mail
file_transport = address_file
pipe_transport = address_pipe
-@@ -334,6 +339,7 @@
+@@ -377,6 +380,7 @@
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
-+ match_directory = !^/nonexistent
++ condition = !match{${rxquote:${home}}}{^/nonexistent}
+
+
+ # This router matches local user mailboxes.
+@@ -420,8 +424,8 @@
+ delivery_date_add
+ envelope_to_add
+ return_path_add
+-# group = mail
+-# mode = 0660
++ group = mail
++ mode = 0660
- # This director matches local user mailboxes.
+ # This transport is used for handling pipe deliveries generated by alias or
diff --git a/mail/exim-devel/files/patch-src::exim.c b/mail/exim-devel/files/patch-src::exim.c
deleted file mode 100644
index c16f4a861e8e..000000000000
--- a/mail/exim-devel/files/patch-src::exim.c
+++ /dev/null
@@ -1,20 +0,0 @@
---- src/exim.c.orig Wed Aug 15 13:09:09 2001
-+++ src/exim.c Fri Nov 2 12:22:38 2001
-@@ -2197,7 +2197,8 @@
-
- if (!admin_user)
- {
-- if (deliver_give_up || daemon_listen || count_queue ||
-+ if (deliver_give_up || daemon_listen ||
-+ (count_queue && queue_list_requires_admin) ||
- (list_queue && queue_list_requires_admin) ||
- (queue_interval >= 0 && prod_requires_admin))
- {
-@@ -3462,6 +3463,7 @@
- }
-
- /* The loop will repeat if more is TRUE. */
-+ while (waitpid(-1, NULL, WNOHANG) > 0);
- }
-
- exim_exit(EXIT_SUCCESS); /* Never returns */
diff --git a/mail/exim-devel/files/patch-src::filter.c b/mail/exim-devel/files/patch-src::filter.c
deleted file mode 100644
index 5b662add1022..000000000000
--- a/mail/exim-devel/files/patch-src::filter.c
+++ /dev/null
@@ -1,31 +0,0 @@
-Fix the message_body_size filter variable bug reported by Phil Chambers
-to the exim-users mailing list on 2001-09-19 using the patch posted to
-the list by the author on 2001-09-24.
-
---- src/filter.c.orig Wed Aug 15 13:09:09 2001
-+++ src/filter.c Wed Sep 26 18:16:20 2001
-@@ -2566,7 +2566,7 @@
- BOOL
- filter_runtest(int fd, BOOL is_system, BOOL dot_ended)
- {
--int rc, body_len, action;
-+int rc, body_len, action, header_size;
- register int ch;
- BOOL yield, delivered;
- struct stat statbuf;
-@@ -2658,6 +2658,7 @@
- s = message_body_end;
- body_len = 0;
- body_linecount = 0;
-+header_size = message_size;
-
- if (!dot_ended && !feof(stdin))
- {
-@@ -2713,6 +2714,7 @@
- }
-
- message_body[body_len] = 0;
-+message_body_size = message_size - header_size;
-
- /* body_len stops at message_body_visible; it if got there, we may have
- wrapped round in message_body_end. */
diff --git a/mail/exim-devel/files/patch-src::smtp_in.c b/mail/exim-devel/files/patch-src::smtp_in.c
deleted file mode 100644
index 4edda1daf19c..000000000000
--- a/mail/exim-devel/files/patch-src::smtp_in.c
+++ /dev/null
@@ -1,10 +0,0 @@
---- src/smtp_in.c.orig Wed Aug 15 13:09:12 2001
-+++ src/smtp_in.c Wed Nov 14 13:24:12 2001
-@@ -2482,6 +2482,7 @@
- mail_from_size + 5000 : 0))
- {
- smtp_printf("452 space shortage, please try later\r\n");
-+ sender_address = NULL;
- break;
- }
-
diff --git a/mail/exim-devel/files/patch-xxx::no_fsync b/mail/exim-devel/files/patch-xxx::no_fsync
deleted file mode 100644
index fc0f4791ac86..000000000000
--- a/mail/exim-devel/files/patch-xxx::no_fsync
+++ /dev/null
@@ -1,103 +0,0 @@
-diff -udrN src.orig/accept.c src/accept.c
---- src.orig/accept.c Thu Sep 6 15:25:28 2001
-+++ src/accept.c Thu Sep 6 15:28:03 2001
-@@ -2140,7 +2140,7 @@
- anything until the terminating dot line is sent. */
-
- if (fflush(data_file) == EOF || ferror(data_file) ||
-- fsync(fileno(data_file)) < 0 || (accept_ferror)(fin))
-+ (perform_fsync && fsync(fileno(data_file))) < 0 || (accept_ferror)(fin))
- {
- char *msg_errno = strerror(errno);
- BOOL input_error = (accept_ferror)(fin) != 0;
-diff -udrN src.orig/deliver.c src/deliver.c
---- src.orig/deliver.c Thu Sep 6 15:25:28 2001
-+++ src/deliver.c Thu Sep 6 15:29:22 2001
-@@ -578,7 +578,8 @@
- {
- BOOL return_output = FALSE;
- struct stat statbuf;
-- fsync(addr->return_file);
-+ if (perform_fsync)
-+ fsync(addr->return_file);
-
- /* If there is no output, do nothing. */
-
-@@ -1580,7 +1581,7 @@
-
- /* Ensure the journal file is pushed out to disc. */
-
-- if (fsync(journal_fd) < 0)
-+ if (perform_fsync && fsync(journal_fd) < 0)
- log_write(0, LOG_MAIN|LOG_PANIC, "failed to fsync journal: %s",
- strerror(errno));
- }
-diff -udrN src.orig/globals.c src/globals.c
---- src.orig/globals.c Thu Sep 6 15:25:28 2001
-+++ src/globals.c Thu Sep 6 15:24:49 2001
-@@ -494,6 +494,7 @@
- BOOL parse_allow_group = FALSE;
- BOOL parse_found_group = FALSE;
- char *percent_hack_domains = NULL;
-+BOOL perform_fsync = TRUE;
- char *pid_file_path = PID_FILE_PATH
- "\0<--------------Space to patch pid_file_path->";
- BOOL preserve_message_logs = FALSE;
-diff -udrN src.orig/globals.h src/globals.h
---- src.orig/globals.h Thu Sep 6 15:25:28 2001
-+++ src/globals.h Thu Sep 6 15:41:35 2001
-@@ -364,6 +364,7 @@
- extern BOOL parse_allow_group; /* Allow group syntax */
- extern BOOL parse_found_group; /* In the middle of a group */
- extern char *percent_hack_domains; /* Local domains for which '% operates */
-+extern BOOL perform_fsync; /* Use fsync() to flush to disk */
- extern char *pid_file_path; /* For writing daemon pids */
- extern BOOL preserve_message_logs; /* Save msglog files */
- extern char *primary_hostname; /* Primary name of this computer */
-diff -udrN src.orig/readconf.c src/readconf.c
---- src.orig/readconf.c Thu Sep 6 15:25:28 2001
-+++ src/readconf.c Thu Sep 6 15:24:19 2001
-@@ -81,6 +81,7 @@
- { "finduser_retries", opt_int, &finduser_retries },
- { "forbid_domain_literals", opt_bool, &forbid_domain_literals },
- { "freeze_tell_mailmaster", opt_bool, &freeze_tell_mailmaster },
-+ { "fsync", opt_bool, &perform_fsync },
- { "gecos_name", opt_stringptr, &gecos_name },
- { "gecos_pattern", opt_stringptr, &gecos_pattern },
- { "headers_check_syntax", opt_bool, &headers_check_syntax },
-diff -udrN src.orig/spool_out.c src/spool_out.c
---- src.orig/spool_out.c Thu Sep 6 15:25:28 2001
-+++ src/spool_out.c Thu Sep 6 15:29:51 2001
-@@ -277,7 +277,7 @@
- just pushes it out of C, and fclose() doesn't guarantee to do the write
- either. That's just the way Unix works... */
-
--if (fsync(fileno(f)) < 0)
-+if (perform_fsync && fsync(fileno(f)) < 0)
- return spool_write_error(where, errmsg, "sync", temp_name, f);
-
- /* Get the size of the file, and close it. */
-diff -udrN src.orig/transports/appendfile.c src/transports/appendfile.c
---- src.orig/transports/appendfile.c Thu Sep 6 15:25:28 2001
-+++ src/transports/appendfile.c Thu Sep 6 15:31:40 2001
-@@ -2556,7 +2556,7 @@
- /* Force out the remaining data to check for any errors; some OS don't allow
- fsync() to be called for a FIFO. */
-
--if (yield == OK && !isfifo && fsync(fd) < 0) yield = DEFER;
-+if (perform_fsync && yield == OK && !isfifo && fsync(fd) < 0) yield = DEFER;
-
- /* Handle error while writing the file. Control should come here directly after
- the error, with the reason in errno. In the case of expansion failure in prefix
-diff -udrN src.orig/transports/smtp.c src/transports/smtp.c
---- src.orig/transports/smtp.c Thu Sep 6 15:25:28 2001
-+++ src/transports/smtp.c Thu Sep 6 15:31:55 2001
-@@ -1462,7 +1462,7 @@
-
- /* Ensure the journal file is pushed out to disc. */
-
-- if (fsync(journal_fd) < 0)
-+ if (perform_fsync && fsync(journal_fd) < 0)
- log_write(0, LOG_MAIN|LOG_PANIC, "failed to fsync journal: %s",
- strerror(errno));
- }
diff --git a/mail/exim-devel/pkg-install b/mail/exim-devel/pkg-install
index 3a1673907c5c..69539a8c560f 100644
--- a/mail/exim-devel/pkg-install
+++ b/mail/exim-devel/pkg-install
@@ -20,11 +20,11 @@ group=mail
if [ "$2" = "PRE-INSTALL" ]; then
# uid=26(mailnull) gid=26(mailnull) groups=26(mailnull)
- if ! /usr/bin/id ${uid} | /usr/bin/grep "uid=${uid}(${user})"; then
+ if ! /usr/bin/id ${uid} | /usr/bin/grep -q "uid=${uid}(${user})"; then
echo "Exim requires user ${user} (UID ${uid}). Please update your system." 1>&2
exit 1
fi
- if ! /usr/bin/grep "^${group}:[^:]*:${gid}:" < /etc/group; then
+ if ! /usr/bin/grep -q "^${group}:[^:]*:${gid}:" < /etc/group; then
echo "Exim requires group ${group} (GID ${gid}). Please update your system." 1>&2
exit 1
fi
diff --git a/mail/exim-devel/pkg-plist b/mail/exim-devel/pkg-plist
index 996ab003b2a9..1e36de2c7780 100644
--- a/mail/exim-devel/pkg-plist
+++ b/mail/exim-devel/pkg-plist
@@ -1,8 +1,9 @@
etc/exim/configure.default
-info/exim_overview.info
info/exim.info
info/exim_filter.info
sbin/exim
+sbin/exim-3.951-1
+sbin/exim_checkaccess
sbin/exim_dumpdb
sbin/exim_fixdb
sbin/exim_lock
@@ -15,8 +16,15 @@ sbin/exigrep
sbin/eximstats
sbin/exiqsumm
%%PORTDOCS%%share/doc/exim/POST-INSTALL-NOTES
+%%PORTDOCS%%share/doc/exim/Exim3.upgrade
+%%PORTDOCS%%share/doc/exim/Exim4.upgrade
+%%PORTDOCS%%share/doc/exim/OptionLists.txt
+%%PORTDOCS%%share/doc/exim/README
+%%PORTDOCS%%share/doc/exim/dbm.discuss.txt
+%%PORTDOCS%%share/doc/exim/exim.8
%%PORTDOCS%%share/doc/exim/filter.txt
-%%PORTDOCS%%share/doc/exim/oview.txt
+%%PORTDOCS%%share/doc/exim/pcre.txt
+%%PORTDOCS%%share/doc/exim/pcretest.txt
%%PORTDOCS%%share/doc/exim/spec.txt
@unexec install-info --delete %D/info/exim_overview.info %D/info/dir
@unexec install-info --delete %D/info/exim.info %D/info/dir
generated by cgit (git 2.34.1) at 2024-11-09 06:20:02 +0800