10 files changed, 0 insertions, 559 deletions
diff --git a/sysutils/Makefile b/sysutils/Makefile
index 4193552ab434..2ea45d76c85e 100644
--- a/sysutils/Makefile
+++ b/sysutils/Makefile
@@ -415,7 +415,6 @@
     SUBDIR += linux-acu
     SUBDIR += linux-afaapps
     SUBDIR += linux-megacli
-    SUBDIR += linux-megacli2
     SUBDIR += linux-megamgr
     SUBDIR += linux-nero
     SUBDIR += linux-procps
diff --git a/sysutils/linux-megacli2/Makefile b/sysutils/linux-megacli2/Makefile
deleted file mode 100644
index 030ff8388bea..000000000000
--- a/sysutils/linux-megacli2/Makefile
+++ /dev/null
@@ -1,62 +0,0 @@
-# Ports collection makefile for:  linux-megacli
-# Date created:			  Wed, Nov 29th, 2006
-# Whom:				  Ruben van Staveren (ruben@verweg.com)
-#
-# $FreeBSD$
-#
-
-PORTNAME=	megacli
-PORTVERSION=	2.00.12
-PORTREVISION=	1
-CATEGORIES=	sysutils linux
-MASTER_SITES=	http://www.lsi.com/DistributionSystem/AssetDocument/support/downloads/megaraid/miscellaneous/linux/
-PKGNAMEPREFIX=	linux-
-DISTNAME=	${PORTVERSION}_Linux_CLI
-
-MAINTAINER=	ruben@verweg.com
-COMMENT=	LSI MegaRAID SAS controller management utility
-
-NO_WRKSUBDIR=	yes
-USE_ZIP=	yes
-RESTRICTED=	Redistribution prohibited, see: http://lsi.com/cm/License.do
-ONLY_FOR_ARCHS=	i386 amd64
-USE_LINUX=	yes
-SUB_FILES=	megacli 407.status-mfi-raid mfi_tty_log
-
-CONFLICTS=	linux-megacli-1*
-LATEST_LINK=	megacli2
-
-# From bsd.linux.rpm.mk
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-post-extract:
-	cd ${WRKSRC} && \
-		${UNZIP_CMD} -qo MegaCliLin.zip && \
-		${RPM2CPIO} MegaCli-${PORTVERSION}-1.i386.rpm | ${CPIO} -id --quiet
-
-do-build:
-	@${BRANDELF} -t Linux ${WRKSRC}/opt/MegaRAID/MegaCli/MegaCli
-
-do-install:
-	${INSTALL_SCRIPT} ${WRKSRC}/megacli ${PREFIX}/sbin/megacli
-	${MKDIR} ${PREFIX}/etc/periodic/daily
-	${INSTALL_SCRIPT} ${WRKSRC}/407.status-mfi-raid ${PREFIX}/etc/periodic/daily
-	${INSTALL_SCRIPT} ${WRKSRC}/mfi_tty_log ${PREFIX}/etc/rc.d
-	${INSTALL_PROGRAM} ${WRKSRC}/opt/MegaRAID/MegaCli/MegaCli ${PREFIX}/libexec
-
-post-install:
-.if !defined(NOPORTDOCS)
-	${MKDIR} ${DOCSDIR}
-	${INSTALL_MAN} ${WRKSRC}/${PORTVERSION}_Linux_Cli.txt ${DOCSDIR}/readme.txt
-	${INSTALL_MAN} ${FILESDIR}/README-status-mfi-raid.txt ${DOCSDIR}/README-status-mfi-raid.txt
-.endif
-	@${CAT} ${PKGMESSAGE}
-
-.include <bsd.port.pre.mk>
-
-.if ${OSVERSION} < 602000
-IGNORE=			needs at least FreeBSD 6.2 and mfi_linux.ko
-.endif
-
-.include <bsd.port.post.mk>
diff --git a/sysutils/linux-megacli2/distinfo b/sysutils/linux-megacli2/distinfo
deleted file mode 100644
index 5041fc6d5776..000000000000
--- a/sysutils/linux-megacli2/distinfo
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 (2.00.12_Linux_CLI.zip) = e37232a86ee81591949f06dbe1f9bf82
-SHA256 (2.00.12_Linux_CLI.zip) = be4fde18f0192df20ffa022ca55fe5c6a0b9ceff36299ff69beab6fabaaeff58
-SIZE (2.00.12_Linux_CLI.zip) = 1367859
diff --git a/sysutils/linux-megacli2/files/407.status-mfi-raid.in b/sysutils/linux-megacli2/files/407.status-mfi-raid.in
deleted file mode 100644
index 25c5ef5f9616..000000000000
--- a/sysutils/linux-megacli2/files/407.status-mfi-raid.in
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# Show status of LSI Logic's MegaRAID SAS RAID controllers.
-#
-# $FreeBSD$
-#
-
-# If there is a global system configuration file, suck it in.
-#
-if test -r /etc/defaults/periodic.conf; then
-    . /etc/defaults/periodic.conf
-    source_periodic_confs
-fi
-
-# Defaults.
-: ${daily_status_mfi_raid_enable:=NO}
-: ${daily_status_mfi_raid_verbose:=NO}
-: ${daily_status_mfi_raid_persist_logs:=YES}
-: ${daily_status_mfi_raid_tty_log:=NO}
-
-megacli=${megacli:-%%PREFIX%%/sbin/megacli}
-logdir=${logdir:-/var/log}
-
-case "$daily_status_mfi_raid_enable" in
-    [Yy][Ee][Ss])
-	echo
-	echo 'Checking status of MFI RAID controllers:'
-	;;
-    *)
-	exit 0
-	;;
-esac
-
-if test `id -u` -ne 0; then
-	echo "You must be root to run `basename $0`." >&2
-	exit 1
-fi
-
-ADPCOUNT=$(${megacli} -adpCount | \
-	awk '/Controller Count:/ { gsub("\\.", ""); print $3 }')
-
-case ${ADPCOUNT} in
-	0)	echo "Error: Cannot find an adapter." >&2
-		exit 1
-		;;
-	[1-9]|[1-9][0-9]|[1-2][0-9][0-9])
-		;;
-	*)
-		echo "Error: Cannot get the number of adapters: ${ADPCOUNT}" >&2
-		exit 1
-		;;
-esac
-
-ADPMINIDX=0
-ADPMAXIDX=`expr ${ADPCOUNT} - 1`
-
-rc=0
-for ctrl in `jot ${ADPCOUNT} ${ADPMINIDX} ${ADPMAXIDX}`; do
-	echo "Adapter: ${ctrl}"
-
-	# Print summary information.
-	echo "------------------------------------------------------------------------"
-	echo "Physical Drive Information:"
-	echo "ENC SLO DEV SEQ MEC OEC PFC LPF STATE"
-	${megacli} -PDList -a${ctrl} | \
-	awk '
-		BEGIN {
-			E=-1; S=-1; D=-1; s=-1; mec=-1; oec=-1; pfc=-1; lpfeqn=-1;
-			state="";
-		}
-		/^Enclosure (Number:/ { E=$3; }
-		/^Enclosure Device ID:/ { E=$4; }
-		/^Slot Number:/ { S=$3; }
-		/^Device Id:/ { D=$3; }
-		/^Sequence Number:/ { s=$3; }
-		/^Media Error Count:/ { mec=$4; }
-		/^Other Error Count:/ { oec=$4; }
-		/^Predictive Failure Count:/ { pfc=$4; }
-		/^Last Predictive Failure Event Seq Number:/ { lpfeqn=$7 }
-		/^Firmware state:/ { state=$3; }
-		/^$/ { 
-			if (E!=-1 && S!=-1 && D!=-1) {
-				printf "%-3d %-3d %-3d %-3d %-3d %-3d %-3d %-3d %s\n",
-					E, S, D, s, mec, oec, pfc, lpfeqn, state;
-			}
-			E=-1; S=-1; D=-1; s=-1; mec=-1; oec=-1; pfc=-1; lpfeqn=-1;
-			state="";
-		}
-	' | sort -n -k1 -k2 -k3
-	echo
-	echo "Virtual Drive Information:"
-	${megacli} -LDInfo -lall -a${ctrl} | \
-	awk '
-		BEGIN {
-			drvs=-1; vd=-1; state=""; name=""; s=-1; strs=-1;
-			rlp=-1; rls=-1; rlq=-1;
-			printf "VD  DRV RLP RLS RLQ STS    SIZE        STATE         NAME\n";
-		}
-		/^Name:/ { sub("^Name:", ""); name=$0; }
-		/^RAID Level:/ {
-			#Primary-1, Secondary-0, RAID Level Qualifier-0
-			_p=_s=_q=$0;
-			sub(".*Primary-", "", _p);
-			sub(", Secondary.*", "", _p);
-			rlp=_p;
-			sub(".*Secondary-", "", _s);
-			sub(", RAID Level.*", "", _s);
-			rls=_s;
-			sub(".*Qualifier-", "", _q);
-			rlq=_q;
-		}
-		/^Size:/ { sub("^Size:", ""); s=$0; }
-		/^State:/ { state=$2; }
-		/^Stripe Size:/ { strs=$3; }
-		/^Number Of Drives:/ { sub("Drives:", "", $3); drvs=$3; }
-		/^Virtual Disk:/ {
-			if (vd!=-1) {
-				printf "%-3d %-3d %-3d %-3d %-3d %-6s %-11s %-13s %s\n",
-					vd, drvs, rlp, rls, rlq, strs, s, state, name; 
-			}
-			drvs=-1; vd=-1; state=""; name=""; s=-1; strs=-1;
-			rlp=-1; rls=-1; rlq=-1;
-			vd=$3;
-		}
-		END {
-			if (vd!=-1) {
-				printf "%-3d %-3d %-3d %-3d %-3d %-6s %-11s %-13s %s\n",
-					vd, drvs, rlp, rls, rlq, strs, s, state, name; 
-			}
-		}
-	'
-	# Print BBU Information, if we found something
-	${megacli} -AdpBbuCmd -a${ctrl} | \
-	awk '
-		BEGIN {
-			type=""; temp=-1; isok="-"; rsoc=-1; asoc=-1;
-			rc=-1; cc=-1; me=-1;
-		}
-		/^BatteryType:/ { type=$2; }
-		/^Temperature:/ { temp=$2; }
-		/^isSOHGood:/ { isok=$2; }
-		/^Relative State of Charge:/ { rsoc=$5; }
-		/^Absolute State of charge:/ { asoc=$5; }
-		/^Remaining Capacity:/ { rc=$3; }
-		/^Cycle Count:/ { cc=$3; }
-		/^Max Error:/ { me=$3; }
-		END {
-			if (type == "") { exit 0 };
-			printf "\nBBU Information:\n"
-			printf "TYPE  TEMP  OK   RSOC  ASOC      RC   CC  ME\n";
-			printf "%-5s  %2dC  %-3s %4d%% %4d%% %4dmAh %4d %2d%%\n",
-				type, temp, isok, rsoc, asoc, rc, cc, me;
-
-		}
-	'
-	echo
-
-	# Give very long outputs.
-	case "$daily_status_mfi_raid_verbose" in
-	[Yy][Ee][Ss])
-		${megacli} -AdpAllInfo -a${ctrl}
-		${megacli} -EncInfo -a${ctrl}
-		${megacli} -PDList -a${ctrl}
-		${megacli} -LDGetNUm -a${ctrl}
-		${megacli} -LDInfo -Lall -a${ctrl}
-		${megacli} -AdpBbuCmd -GetBbuStatus -a${ctrl}
-		;;
-	    *)
-		;;
-	esac
-
-	# Diff daily logs.
-	echo "Controller Logs:"
-	ctrl_log=${logdir}/mfi_raid_${ctrl}
-	case "$daily_status_mfi_raid_persist_logs" in
-	[Yy][Ee][Ss])
-		if test ! -f ${ctrl_log}.today; then
-			touch ${ctrl_log}.today
-		fi
-		mv -f ${ctrl_log}.today ${ctrl_log}.yesterday
-		;;
-	*)
-		;;
-	esac
-	${megacli} -AdpEventLog -GetEvents -f ${ctrl_log}.tmp -a${ctrl}
-	awk '
-		BEGIN {
-			inrecord=0;
-		}
-		printed=0;
-		/^seqNum: / {
-			inrecord=0;
-			print "";
-			print "====================================" \
-				"====================================";
-		}
-		/^Event Data:/ { inrecord=1; printed=1; }
-		/^seqNum: /, /^Event Data:/
-		/^===========/ { printed=1; }
-		/^$/ { printed=1; }
-		{ if (inrecord && !printed) { printf "\t%s\n", $0; } }
-	' < ${ctrl_log}.tmp > ${ctrl_log}.today
-	rm -f ${ctrl_log}.tmp
-	# Now show the differences or the entire log.
-	case "$daily_status_mfi_raid_persist_logs" in
-	[Yy][Ee][Ss])
-		cmp -s ${ctrl_log}.yesterday ${ctrl_log}.today
-		raid_rc=$?
-		if test $raid_rc -ne 0; then
-			diff -u ${ctrl_log}.yesterday ${ctrl_log}.today | \
-				grep -v '^-\|^$'
-		fi
-		;;
-	*)
-		# XXX we might consider clearing the logs here
-		# ${megacli} -AdpEventLog -Clear -a${ctrl}
-		raid_rc=0
-		lines=`wc -l ${ctrl_log}.today | awk '{ print $1 }'`
-		if test $lines -gt 4; then
-			cat ${ctrl_log}.today
-			raid_rc=1
-		fi
-	esac
-	if test $raid_rc -eq 0; then
-		echo "  No new log messages."
-	fi
-
-	# TTY Log
-	echo "TTY Log:"
-	tty_log=${logdir}/mfi_raid_${ctrl}_tty
-	tty_rc=0
-	case "$daily_status_mfi_raid_tty_log" in
-	[Yy][Ee][Ss])
-		if test ! -f ${tty_log}.today; then
-			touch ${tty_log}.today
-		fi
-		mv -f ${tty_log}.today ${tty_log}.yesterday
-		${megacli} -FwTermLog Dsply -a${ctrl} > ${tty_log}.today
-		cmp -s ${tty_log}.yesterday ${tty_log}.today
-		tty_rc=$?
-		if test $tty_rc -ne 0; then
-			diff -u ${tty_log}.yesterday ${tty_log}.today | \
-				grep -v '^-\|^$'
-		else
-			echo "  No new TTY log messages."
-		fi
-		;;
-	*)
-		;;
-	esac
-	[ $rc -eq 0 ] && [ $raid_rc -ne 0 -o $tty_rc -ne 0 ] && rc=3
-done
-
-exit ${rc}
-
-# end
diff --git a/sysutils/linux-megacli2/files/README-status-mfi-raid.txt b/sysutils/linux-megacli2/files/README-status-mfi-raid.txt
deleted file mode 100644
index 7f6cbae76998..000000000000
--- a/sysutils/linux-megacli2/files/README-status-mfi-raid.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-# $FreeBSD$
-
-The output of periodic/daily/407.status-mfi-raid uses several
-abbreviations. This document maps the abbreviations to the
-names MegaCli uses, which were just too long for summary mails.
-
-Section 'Physical Drive Information:'
---------------------------------------------------
-ENC	Enclosure Number
-SLO	Slot Number
-DEV	Device Id
-SEQ	Sequence Number
-MEC	Media Error Count
-OEC	Other Error Count
-PFC	Predictive Failure Count
-LPF	Last Predictive Failure Event Seq Number
-STATE	Firmware state
-
-Section 'Virtual Drive Information:'
---------------------------------------------------
-VD	Virtual Disk
-DRV	Number Of Drives
-RLP	RAID Level: Primary
-RLS	RAID Level: Secondary
-RLQ	RAID Level: RAID Level Qualifier
-STS	Stripe Size
-SIZE	Size
-STATE	State
-NAME	Name
-
-Section 'BBU Information:'
---------------------------------------------------
-TYPE	BatteryType
-TEMP	Temperature
-OK	isSOHGood
-RSOC	Relative State of Charge
-ASOC	Absolute State of charge
-RC	Remaining Capacity
-CC	Cycle Count
-ME	Max Error
-
-# end
diff --git a/sysutils/linux-megacli2/files/megacli.in b/sysutils/linux-megacli2/files/megacli.in
deleted file mode 100644
index acd82899f556..000000000000
--- a/sysutils/linux-megacli2/files/megacli.in
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/sh
-
-# check for root user
-#
-if [ `id -u` -ne 0 ]
-then
-	echo "You must be root to run `basename $0`." >&2
-	exit 1
-fi
-
-osrelease=`sysctl -n compat.linux.osrelease`
-
-case $osrelease in
-	2.6.*)
-		if [ `echo $osrelease | cut -d . -f 3` -lt 12 ]; then
-		osrelease=TOOLOW
-		fi
-	;;
-	2.*)
-		if [ `echo $osrelease | cut -d . -f 2` -lt 6 ]; then
-		osrelease=TOOLOW
-		fi
-	;;
-	*)
-		if [ `echo $osrelease | cut -d . -f 1` -lt 2 ]; then
-		osrelease=TOOLOW
-		fi
-	;;
-esac
-
-if [ $osrelease = "TOOLOW" ]; then
-        echo "You need to set compat.linux.osrelease to atleast 2.6.12 to run `basename $0`." >&2
-        exit 1
-fi
-
-
-lpfs=`mount -t linprocfs | awk 'END{ print NR }'`
-if [ ${lpfs} -le 0 ]; then
-	echo "You need to mount linprocfs to run `basename $0`." >&2
-	exit 1
-fi
-lsfs=`mount -t linsysfs | awk 'END{ print NR }'`
-if [ ${lsfs} -le 0 ]; then
-	echo "You need to mount linsysfs to run `basename $0`." >&2
-	exit 1
-fi
-
-# check for active mfi_linux.ko
-#
-if ! kldstat -q -m mfi_linux
-then
-	if kldload mfi_linux
-	then
-		echo 'mfi_linux module loaded.' >&2
-	else
-		echo 'mfi_linux module failed to load.' >&2
-		exit 1
-	fi
-fi
-
-if [ $# -le 0 ]; then
-	echo "usage: `basename $0` [options]" >&2
-	exec %%PREFIX%%/libexec/MegaCli -h
-fi
-
-exec %%PREFIX%%/libexec/MegaCli ${*}
diff --git a/sysutils/linux-megacli2/files/mfi_tty_log.in b/sysutils/linux-megacli2/files/mfi_tty_log.in
deleted file mode 100644
index 43f5114ee010..000000000000
--- a/sysutils/linux-megacli2/files/mfi_tty_log.in
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/sh
-#
-# $FreeBSD: /tmp/pcvs/ports/sysutils/linux-megacli2/files/Attic/mfi_tty_log.in,v 1.2 2009-01-18 19:50:26 pgollucci Exp $
-#
-
-# PROVIDE: mfi_tty_log
-# REQUIRE: abi
-# KEYWORD: nojail
-
-: ${rc_mfi_raid_tty_log:=NO}
-
-. /etc/rc.subr
-
-name="mfi_tty_log"
-start_cmd="${name}_start"
-stop_cmd=":"
-
-mfi_tty_log_start()
-{
-	megacli=${megacli:-%%PREFIX%%/sbin/megacli}
-	logdir=${logdir:-/var/log}
-
-	case "$rc_mfi_raid_tty_log" in
-	    [Yy][Ee][Ss])
-		echo
-		echo 'Checking for TTY logs of MFI(4) RAID controllers:'
-		;;
-	    *)
-		return 0
-		;;
-	esac
-
-	if test `id -u` -ne 0; then
-		echo "You must be root to run `basename $0`." >&2
-		return 1
-	fi
-
-	ADPCOUNT=$(${megacli} -adpCount | \
-		awk '/Controller Count:/ { gsub("\\.", ""); print $3 }')
-
-	case ${ADPCOUNT} in
-		0)	echo "Error: Cannot find an adapter." >&2
-			return 1
-			;;
-		[1-9]|[1-9][0-9]|[1-2][0-9][0-9])
-			;;
-		*)
-			echo "Error: Cannot get the number of adapters: ${ADPCOUNT}" >&2
-			return 1
-			;;
-	esac
-
-	ADPMINIDX=0
-	ADPMAXIDX=`expr ${ADPCOUNT} - 1`
-
-	for ctrl in `jot ${ADPCOUNT} ${ADPMINIDX} ${ADPMAXIDX}`; do
-		tty_log=${logdir}/mfi_raid_${ctrl}_tty.boot
-		echo " Adapter: ${ctrl} - TTY log saved to ${tty_log}"
-		${megacli} -FwTermLog Dsply -a${ctrl} > ${tty_log}
-	done
-}
-
-run_rc_command "$1"
diff --git a/sysutils/linux-megacli2/pkg-descr b/sysutils/linux-megacli2/pkg-descr
deleted file mode 100644
index b6c873ae443a..000000000000
--- a/sysutils/linux-megacli2/pkg-descr
+++ /dev/null
@@ -1,10 +0,0 @@
-LSI Logic MegaRAID SAS MegaCLI Release
-
-This is the Linux console based management utility for the LSI
-MegaRAID SAS family of controllers.
-
-FreeBSD >= 6.1 supports running this tool by the means of the
-mfi_linux.ko kernel module and the /dev/mfi0 device.
-
-Author:	LSI Logic Corporation
-WWW:	http://www.lsi.com/
diff --git a/sysutils/linux-megacli2/pkg-message b/sysutils/linux-megacli2/pkg-message
deleted file mode 100644
index 4e4a56e2ba26..000000000000
--- a/sysutils/linux-megacli2/pkg-message
+++ /dev/null
@@ -1,47 +0,0 @@
-
-===================================================================
-This port installed a commercial software product with a restricted
-license. Please review the license terms at this URL:
-
-	http://www.lsi.com/cm/License.do
-
-===================================================================
-
-Add the following to /boot/loader.conf
-
-	# For MegaCLi
-	mfi_linux_load="YES"
-
-Add the following to /etc/sysctl.conf
-
-	# For MegaCLi
-	compat.linux.osrelease=2.6.12
-
-Add the following to /etc/fstab
-
-	# For MegaCLi
-	linproc     /compat/linux/proc  linprocfs rw 0 0
-	linsys      /compat/linux/sys   linsysfs  rw 0 0
-
-Add the following to /etc/periodic.conf
-
-	# !!! Warning: test before running on a production system !!!
-	# !!! Warning: might hang your system                     !!!
-	# For daily summary mails and log diffs:
-	daily_status_mfi_raid_enable="YES"
-	# In case you want really lots of details enable this:
-	daily_status_mfi_raid_verbose="YES"
-	# In case you want the tty logs from the controller
-	daily_status_mfi_raid_tty_log="YES"
-
-Add the following to /etc/rc.conf
-
-# Save tty log on reboot (you want this)
-rc_mfi_raid_tty_log="YES"
-
-
-If you find mfi(4) too verbose, see mfi_evt_class_t in
-/usr/src/sys/dev/mfi/mfireg.h for values you can use in the
-	hw.mfi.event_class
-sysctl variable.
-
diff --git a/sysutils/linux-megacli2/pkg-plist b/sysutils/linux-megacli2/pkg-plist
deleted file mode 100644
index c565df0de4a7..000000000000
--- a/sysutils/linux-megacli2/pkg-plist
+++ /dev/null
@@ -1,9 +0,0 @@
-sbin/megacli
-libexec/MegaCli
-etc/periodic/daily/407.status-mfi-raid
-etc/rc.d/mfi_tty_log
-%%PORTDOCS%%%%DOCSDIR%%/readme.txt
-%%PORTDOCS%%%%DOCSDIR%%/README-status-mfi-raid.txt
-%%PORTDOCS%%@dirrm %%DOCSDIR%%
-@dirrmtry etc/periodic/daily
-@dirrmtry etc/periodic