path: root/Mk/bsd.port.mk

#-*- mode: Fundamental; tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
#   $NetBSD: $
#
#   bsd.port.mk - 940820 Jordan K. Hubbard.
#   This file is in the public domain.
#
# Please view me with 4 column tabs!

# There are two different types of "maintainers" in the whole ports
# framework concept.  The maintainer of the bsd.port*.mk files
# is listed below in the ${OPSYS}_MAINTAINER entries (this file
# is used by multiple *BSD flavors).  You should consult him
# if you have any questions/suggestions regarding this file.
#
# DO NOT COMMIT CHANGES TO THIS FILE BY YOURSELF!

FreeBSD_MAINTAINER= asami@FreeBSD.org

# For each port, the MAINTAINER variable is what you should consult for
# contact information on the person(s) to contact if you have questions/
# suggestions about that specific port.  By default (if no MAINTAINER
# is listed), a port is maintained by the subscribers of the ports@FreeBSD.org
# mailing list, and any correspondece should be directed there.
#
# MAINTAINER    - The e-mail address of the contact person for this port
#                 (default: ports@FreeBSD.org).
#
# These are meta-variables that are automatically set to the system
# you are running on.
# 
# ARCH          - The architecture, as returned by "uname -m".
# OPSYS         - Portability clause.  This is the operating system the
#                 makefile is being used on.  Automatically set to
#                 "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
# OSREL         - The release version (numeric) of the operating system.
# OSVERSION     - The value of __FreeBSD_version.
# PORTOBJFORMAT - The object format ("aout" or "elf").
#
# These variables are used to identify your port.
#
# PORTNAME      - Name of software.
# PORTVERSION   - Version of software.
# PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc.
# PKGNAMESUFFIX - Suffix to specify compilation options.
# PKGNAME       - Always defined as
#                 ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}.
#                 Do not define this in your Makefile.
# DISTNAME      - Name of port or distribution used in generating
#                 WRKSRC and DISTFILES below (default:
#                 ${PORTNAME}-${PORTVERSION}).
# CATEGORIES    - A list of descriptive categories into which this port falls.
#
# These variable describe how to fetch files required for building the port.
#
# DISTFILES     - Name(s) of archive file(s) containing distribution
#                 (default: ${DISTNAME}${EXTRACT_SUFX}).  Set this to
#                 an empty string if the port doesn't require it.
# EXTRACT_SUFX  - Suffix for archive names (default: .tar.bz2 if USE_BZIP2
#                 is set, .zip if USE_ZIP is set, .tar.gz otherwise).  
#                 You never have to set both DISTFILES and EXTRACT_SUFX.
# MASTER_SITES  - Primary location(s) for distribution files if not found
#                 locally.
# PATCHFILES    - Name(s) of additional files that contain distribution
#                 patches (default: none).  make will look for them at
#                 PATCH_SITES (see below).  They will automatically be
#                 uncompressed before patching if the names end with
#                 ".gz" or ".Z".
# PATCH_SITES   - Primary location(s) for distribution patch files
#                 if not found locally.
# DIST_SUBDIR   - Suffix to ${DISTDIR}.  If set, all ${DISTFILES} 
#                 and ${PATCHFILES} will be put in this subdirectory of
#                 ${DISTDIR} (see below).  Also they will be fetched in
#                 this subdirectory from FreeBSD mirror sites.
# ALLFILES      - All of ${DISTFILES} and ${PATCHFILES}.
# IGNOREFILES   - If some of the ${ALLFILES} are not checksum-able, set
#                 this variable to their names.
# EXTRACT_ONLY  - If defined, a subset of ${DISTFILES} you want to
#                 actually extract.
#
# These three variables are typically set in /etc/make.conf to indicate
# the user's preferred location to fetch files from.
#
# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
#                 files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
#                 (default:
#                 ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/)
# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
#                 value.
# MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
#                 MASTER_SITES.
#
# Set these if your port should not be built under certain circumstances.
# These are string variables; you should set them to the reason why
# they are necessary.
#
# RESTRICTED    - Port is restricted (e.g., contains cryptography, etc.).
# NO_CDROM      - Port may not go on CDROM.
# NO_PACKAGE    - Port should not be packaged but distfiles can be put on
#                 ftp sites and CDROMs.
# BROKEN_ELF    - Port doesn't build on ELF machines.
# BROKEN        - Port is broken.
#
# In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles
# or patchfiles have redistribution restrictions, set the following
# to the list of such files.
#
# RESTRICTED_FILES - List of files that cannot be redistributed
#                 (default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED
#                 or NO_CDROM is set, empty otherwise).
#
# This variable is a boolean, so you don't need to set it to the reason.
#
# IS_INTERACTIVE - Set this if your port needs to interact with the user
#                 during any step in a package build.  User can then decide
#                 to skip this port by setting ${BATCH}, or compiling only
#                 the interactive ports by setting ${INTERACTIVE}.
#
# Set these if your port only makes sense to certain archetictures.
# They are lists containing names for them (e.g., "alpha i386").
#
# ONLY_FOR_ARCHS - Only build ports if ${ARCH} matches one of these.
# NOT_FOR_ARCHS  - Only build ports if ${ARCH} doesn't match one of these.
#
# Use these if your port uses some of the common software packages. By
# convention these should be set to 'yes', although they only need to be
# defined.
#
# USE_BZIP2     - Says that the port tarballs use bzip2, not gzip, for
#                 compression.
# USE_ZIP       - Says that the port distfile uses zip, not tar w/[bg]zip
#                 for compression.
# USE_NEWGCC    - Says that the port requirest the latest gcc, either in
#                 the system or installed from a port.
# USE_GMAKE     - Says that the port uses gmake.
# GMAKE         - Set to path of GNU make if not in $PATH (default: gmake).
# USE_AUTOMAKE  - Says that the port uses automake.  Implies USE_AUTOCONF.
# AUTOMAKE      - Set to path of GNU automake if not in $PATH (default:
#                 automake).
# USE_AUTOCONF  - Says that the port uses autoconf.  Implies GNU_CONFIGURE.
# AUTOCONF      - Set to path of GNU autoconf if not in $PATH (default:
#                 autoconf).
# USE_LIBTOOL   - Says that the port uses Libtool.  Implies GNU_CONFIGURE.
# LIBTOOL       - Set to path of libtool (default: libtool).
# LIBTOOLFILES  - Files to patch for libtool (defaults: "aclocal.m4" if
#                 USE_AUTOCONF is set, "configure" otherwise).
# LIBTOOLFLAGS  - Additional flags to pass to ltconfig
#                 (default: --disable-ltlibs)
# USE_PERL5     - Says that the port uses perl5 for building and running.
# PERL5         - Set to full path of perl5, either in the system or
#                 installed from a port.
# PERL          - Set to full path of perl5, either in the system or
#                 installed from a port, but without the version number.
#                 Use this if you need to replace "#!" lines in scripts.
# PERL_VERSION  - Full version of perl5 (see below for current value).
# PERL_VER      - Short version of perl5 (see below for current value).
# PERL_ARCH     - Directory name of architecture dependent libraries
#                 (value: ${ARCH}-freebsd).
# USE_BISON     - Says that the port uses bison for building.
# USE_IMAKE     - Says that the port uses imake.  Implies USE_X_PREFIX.
# XMKMF         - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
#                       target.
# USE_X_PREFIX  - Says that the port installs in ${X11BASE}.  Implies USE_XLIB.
# USE_XLIB      - Says that the port uses X libraries.
# USE_QT        - Says that the port uses version 1 of the qt toolkit.
#                 Implies USE_NEWGCC.
# USE_QT2       - Says that the port uses version 2 of the qt toolkit.
#                 Implies USE_NEWGCC.
#
# Dependency checking.  Use these if your port requires another port
# not in the list above.
#
# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
#                 package depends in the "fetch" stage.  "path" is the
#                 name of a file if it starts with a slash (/), an
#                 executable otherwise.  make will test for the
#                 existence (if it is a full pathname) or search for
#                 it in your $PATH (if it is an executable) and go
#                 into "dir" to do a "make all install" if it's not
#                 found.  If the third field ("target") exists, it will
#                 be used instead of ${DEPENDS_TARGET}.
# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
#                 package depends to build (between the "extract" and
#                 "build" stages, inclusive).  The test done to
#                 determine the existence of the dependency is the
#                 same as FETCH_DEPENDS.  If the third field ("target")
#                 exists, it will be used instead of ${DEPENDS_TARGET}.
# RUN_DEPENDS   - A list of "path:dir[:target]" tuples of other ports this
#                 package depends to run.  The test done to determine
#                 the existence of the dependency is the same as
#                 FETCH_DEPENDS.  This will be checked during the
#                 "install" stage and the name of the dependency will
#                 be put into the package as well.  If the third field
#                 ("target") exists, it will be used instead of
#                 ${DEPENDS_TARGET}.
# LIB_DEPENDS   - A list of "lib:dir[:target]" tuples of other ports this
#                 package depends on.  "lib" is the name of a shared library.
#                 make will use "ldconfig -r" to search for the
#                 library.  Note that lib can not contain regular expressions.
# DEPENDS       - A list of "dir[:target]" tuples of other ports this
#                 package depends on being made first.  Use this only for
#                 things that don't fall into the above four categories.
#                 If the second field ("target") exists, it will be used
#                 instead of ${DEPENDS_TARGET}.
# DEPENDS_TARGET - The default target to execute when a port is calling a
#                 dependency (default: "install").
#
# Various directory definitions and variables to control them.
# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
#
# X11BASE       - Where X11 ports install things (default: /usr/X11R6).
# LOCALBASE     - Where non-X11 ports install things (default: /usr/local).
# LINUXBASE     - Where Linux ports install things (default: /compat/linux).
# PREFIX        - Where *this* port installs its files (default: ${X11BASE}
#                 if USE_X_PREFIX is set, ${LINUXBASE} if USE_LINUX_PREFIX
#                 is set, otherwise ${LOCALBASE}).
# MASTERDIR     - Where the port finds patches, package files, etc.  Define
#                 this is you have two or more ports that share most of the
#                 files (default: ${.CURDIR}).
# PORTSDIR      - The root of the ports tree.  Defaults:
#                   FreeBSD/OpenBSD: /usr/ports
#                   NetBSD:          /usr/opt
# DISTDIR       - Where to get gzip'd, tarballed copies of original sources
#                 (default: ${PORTSDIR}/distfiles).
# PACKAGES      - A top level directory where all packages go (rather than
#                 going locally to each port). (default: ${PORTSDIR}/packages).
# WRKDIRPREFIX  - The place to root the temporary working directory
#                 hierarchy (default: none).
# WRKDIR        - A temporary working directory that gets *clobbered* on clean
#                 (default: ${WRKDIRPREFIX}${.CURDIR}/work).
# WRKSRC        - A subdirectory of ${WRKDIR} where the distribution actually
#                 unpacks to.  (Default: ${WRKDIR}/${DISTNAME} unless
#                 NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
# NO_WRKSUBDIR  - Assume port unpacks directly into ${WRKDIR}.
# PATCHDIR      - A directory containing any additional patches you made
#                 to port this software to FreeBSD (default:
#                 ${MASTERDIR}/patches)
# SCRIPTDIR     - A directory containing any auxiliary scripts
#                 (default: ${MASTERDIR}/scripts)
# FILESDIR      - A directory containing any miscellaneous additional files.
#                 (default: ${MASTERDIR}/files)
# PKGDIR        - A direction containing any package creation files.
#                 (default: ${MASTERDIR}/pkg)
#
# Motif support:
#
# REQUIRES_MOTIF - Set this in your port if it requires Motif.  It will  be
#                 built only if HAVE_MOTIF is set.
# HAVE_MOTIF    - If set, means system has Motif.  Typically set in
#                 /etc/make.conf.
# MOTIF_STATIC  - If set, link libXm statically; otherwise, link it
#                 dynamically.  Typically set in /etc/make.conf.
# MOTIFLIB      - Set automatically to appropriate value depending on
#                 ${MOTIF_STATIC}.  Substitute references to -lXm with 
#                 patches to make your port conform to our standards.
# MOTIF_ONLY    - If set, build Motif ports only.  (Not much use except for
#                 building packages.)
#
# Variables that serve as convenient "aliases" for your *-install targets.
# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
#
# INSTALL_PROGRAM - A command to install binary executables.
# INSTALL_SCRIPT - A command to install executable scripts.
# INSTALL_DATA  - A command to install sharable data.
# INSTALL_MAN   - A command to install manpages (doesn't compress).
#
# Set the following to specify all manpages that your port installs.
# These manpages will be automatically listed in ${PLIST}.  Depending
# on the setting of NOMANCOMPRESS, the make rules will compress the
# manpages for you.
#
# MAN<sect>     - A list of manpages, categorized by section.  For
#                 example, if your port has "man/man1/foo.1" and
#                 "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
#                 The available sections chars are "123456789LN".
# MLINKS        - A list of <target, source> tuples for creating links
#                 for manpages.  For example, "MLINKS= a.1 b.1 c.3 d.3"
#                 will do an "ln -sf a.1 b.1" and "ln -sf c.3 and d.3" in
#                 appropriate directories.  (Use this even if the port
#                 installs its own manpage links so they will show up
#                 correctly in ${PLIST}.)
# MANPREFIX     - The directory prefix for ${MAN<sect>} and ${MLINKS}
#                 (default: ${PREFIX}).
# MAN<sect>PREFIX - If manual pages of some sections install in different
#                 locations than others, use these (default: ${MANPREFIX}).
# MANCOMPRESSED - This variable can take values "yes", "no" or
#                 "maybe".  "yes" means manpages are installed
#                 compressed; "no" means they are not; "maybe" means
#                 it changes depending on the value of
#                 NOMANCOMPRESS.  The default is "yes" if USE_IMAKE
#                 is set and NO_INSTALL_MANPAGES is not set, and
#                 "no" otherwise.
#
# Default targets and their behaviors:
#
# fetch         - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
#                 into ${DISTDIR} as necessary.
# fetch-list    - Show list of files that would be retrieved by fetch.
# fetch-recursive - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined),
#                 for port and dependencies into ${DISTDIR} as necessary.
# fetch-recursive-list  - Show list of files that would be retrieved by
#                 fetch-recursive.
# extract       - Unpacks ${DISTFILES} into ${WRKDIR}.
# patch         - Apply any provided patches to the source.
# configure     - Runs either GNU configure, one or more local configure
#                 scripts or nothing, depending on what's available.
# build         - Actually compile the sources.
# install       - Install the results of a build.
# reinstall     - Install the results of a build, ignoring "already installed"
#                 flag.
# deinstall     - Remove the installation.
# package       - Create a package from an _installed_ port.
# describe      - Try to generate a one-line description for each port for
#                 use in INDEX files and the like.
# checkpatch    - Do a "patch -C" instead of a "patch".  Note that it may
#                 give incorrect results if multiple patches deal with
#                 the same file.
# checksum      - Use distinfo to ensure that your distfiles are valid.
# checksum-recursive - Run checksum in this port and all dependencies.
# makesum       - Generate distinfo (only do this for your own ports!).
# clean         - Remove ${WRKDIR} and other temporary files used for building.
# clean-depends - Do a "make clean" for all dependencies.
#
# Default sequence for "all" is:  fetch checksum extract patch configure build
#
# Please read the comments in the targets section below, you
# should be able to use the pre-* or post-* targets/scripts
# (which are available for every stage except checksum) or
# override the do-* targets to do pretty much anything you want.
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
#
# Set these variables if your port doesn't need some of the steps.
# Note that there are no NO_PATCH or NO_CONFIGURE variables becuase
# those steps are empty by default.  NO_EXTRACT is not allowed anymore
# since we need to at least create ${WRKDIR}.  Also, NO_CHECKSUM is a user
# variable and is not to be set in a port's Makefile.  See above for NO_PACKAGE.
#
# NO_BUILD      - Use a dummy (do-nothing) build target.
# NO_INSTALL    - Use a dummy (do-nothing) install target.
#
# Here are some variables used in various stages.
#
# For fetch:
#
# FETCH_CMD     - Full path to ftp/http fetch command if not in $PATH
#                 (default: "/usr/bin/fetch -A").
# FETCH_BEFORE_ARGS -
#                 Arguments to ${FETCH_CMD} before filename (default: none).
# FETCH_AFTER_ARGS -
#                 Arguments to ${FETCH_CMD} following filename (default: none).
# FETCH_ENV     - Environment to pass to ${FETCH_CMD} (default: none).
#
# For extract:
#
# EXTRACT_CMD   - Command for extracting archive (default: "bzip2" if
#                 USE_BZIP2 is set, "unzip" if USE_ZIP is set, "gzip" 
#                 otherwise).
# EXTRACT_BEFORE_ARGS -
#                 Arguments to ${EXTRACT_CMD} before filename
#                 (default: "-dc").
# EXTRACT_AFTER_ARGS -
#                 Arguments to ${EXTRACT_CMD} following filename
#                 (default: "| tar -xf -").
# EXTRACT_PRESERVE_OWNERSHIP -
#                 Normally, when run as "root", the extract stage will
#                 change the owner and group of all files under ${WRKDIR}
#                 to 0:0.  Set this variable if you want to turn off this
#                 feature.
#
# For patch:
#
# EXTRA_PATCHES - Define this variable if you have patches not in
#                 ${PATCHDIR}.  This usually happens when you need to
#                 do some pre-processing before some distribution
#                 patches can be applied.  In that case, fetch them as
#                 extra distfiles, put the processed results in
#                 ${WRKDIR}, then point EXTRA_PATCHES to them.
#
#                 The patches specified by this variable will be
#                 applied after the normal distribution patches but
#                 before those in ${PATCHDIR}.
# PATCH_WRKSRC  - Directory to apply patches in (default: ${WRKSRC}).
#
# For configure:
#
# HAS_CONFIGURE - Says that the port has its own configure script.  The
#                 configure stage will not do anything if this is not set.
# GNU_CONFIGURE - Set if you are using GNU configure (optional).  Implies
#                 HAS_CONFIGURE.
# PERL_CONFIGURE - Configure using Perl's MakeMaker.  Implies USE_PERL5.
# CONFIGURE_WRKSRC - Directory to run configure in (default: ${WRKSRC}).
# CONFIGURE_SCRIPT - Name of configure script, relative to ${CONFIGURE_WRKSRC}
#                 (default: "Makefile.PL" if PERL_CONFIGURE is set,
#                 "configure" otherwise).
# CONFIGURE_TARGET - The name of target to call when GNU_CONFIGURE is
#                 defined (default: ${MACHINE_ARCH}--freebsd${OSREL}).
# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set
#                 (default: "--prefix=${PREFIX} ${CONFIGURE_TARGET}" if
#                 GNU_CONFIGURE is set, "CC=${CC} CCFLAGS=${CFLAGS}
#                 PREFIX=${PREFIX}" if PERL_CONFIGURE is set, empty otherwise).
# CONFIGURE_ENV - Pass these env (shell-like) to configure if
#                 ${HAS_CONFIGURE} is set.
# CONFIGURE_LOG - The name of configure log file (default: config.log).
#                 It will be printed to the screen if configure fails.
#
# For build and install:
#
# ALL_TARGET    - Default target for sub-make in build stage (default: all).
# BUILD_WRKSRC  - Directory to do build in (default: ${WRKSRC}).
# MAKE_ENV      - Additional environment vars passed to sub-make in build
#                 and install stages (default: see below).
# MAKE_ARGS     - Any extra arguments to sub-make in build and install
#                 stages (default: none).
#
# For install:
#
# INSTALL_TARGET - Default target for sub-make in install stage 
#                 (default: install).
# INSTALL_WRKSRC - Directory to install from (default: ${WRKSRC}).
# NO_MTREE      - If set, will not invoke mtree from bsd.port.mk from
#                 the "install" target.
# MTREE_FILE    - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
#                 if USE_X_PREFIX is set, /etc/mtree/BSD.local.dist
#                 otherwise.)
# PLIST         - Name of the `packing list' file (default: ${PKGDIR}/PLIST).
#                 Change this to ${WRKDIR}/PLIST or something if you
#                 need to write to it.  (It is not a good idea for a port
#                 to write to any file outside ${WRKDIR} during a normal
#                 build.)
# TMPPLIST      - Name of the `packing list' file after processing
#                 (default: ${WRKDIR}/.PLIST.mktmp).
# PLIST_SUB     - List of "variable=value" pair for substitution in ${PLIST}
#                 (default: see below).
# INSTALLS_SHLIB - If set, bsd.port.mk will automatically run ldconfig commands
#                 from post-install and also add appropriate @exec/@unexec
#                 directives to directories listed in LDCONFIG_DIRS.
# LDCONFIG_DIRS - List of directories to run ldconfig if
#                 INSTALLS_SHLIB is set (default: %%PREFIX%%/lib).
#                 Note that this is passed through sed just like the
#                 rest of PLIST, so ${PLIST_SUB} substitutions also
#                 apply here.  It is recommended that you use
#                 %%PREFIX%% for ${PREFIX}, %%LOCALBASE%% for
#                 ${LOCALBASE} and %%X11BASE%% for ${X11BASE}.
# 
# Note that the install target will automatically add manpages (see
# above) and also substitute special sequences of characters (delimited
# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}.  For
# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
# ${TMPPLIST} is generated between the do-install and post-install
# stages.  If you are generating the packing list on-the-fly, make
# sure it's generated by the end of do-install!
#
# For package:
#
# NO_LATEST_LINK - Do not install the "Latest" link for package.  Define this
#                 if this port is a beta version of another stable port
#                 which is also in the tree.
#
# This is used in all stages:
#
# SCRIPTS_ENV   - Additional environment vars passed to scripts in
#                 ${SCRIPTDIR} executed by bsd.port.mk (default: see below).
#
# Finally, variables to change if you want a special behavior.  These
# are for debugging purposes.  Don't set them in your Makefile.
#
# ECHO_MSG      - Used to print all the '===>' style prompts - override this
#                 to turn them off (default: /bin/echo).
# PATCH_DEBUG   - If set, print out more information about the patches as
#                 it attempts to apply them.
# PKG_DBDIR     - Where package installation is recorded (default: /var/db/pkg)
# NO_PKG_REGISTER - Don't register a port installation as a package.
# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
#                 registration information in ${PKG_DBDIR}/${PKGNAME}.
# NO_DEPENDS    - Don't verify build of dependencies.
# NO_CHECKSUM   - Don't verify the checksum.  Typically used when
#                 when you noticed the distfile you just fetched has
#                 a different checksum and you intend to verify if
#                 the port still works with it.

# Start of pre-makefile section.
.if !defined(AFTERPORTMK)

.if defined(_PREMKINCLUDED)
.BEGIN:
    @${ECHO} "${PKGNAME}: You cannot include bsd.port[.pre].mk twice"
    @${FALSE}
.endif

_PREMKINCLUDED= yes

AWK?=       /usr/bin/awk
BASENAME?=  /usr/bin/basename
CAT?=       /bin/cat
CHMOD?=     /bin/chmod
CHOWN?=     /usr/sbin/chown
CP?=        /bin/cp
ECHO?=      /bin/echo
EXPR?=      /bin/expr
FALSE?=     /usr/bin/false
GREP?=      /usr/bin/grep
GUNZIP_CMD?=    /usr/bin/gunzip -f
GZCAT?=     /usr/bin/gzcat
GZIP?=      -9
GZIP_CMD?=  /usr/bin/gzip -nf ${GZIP}
LDCONFIG?=  /sbin/ldconfig
LN?=        /bin/ln
MKDIR?=     /bin/mkdir -p
MV?=        /bin/mv
RM?=        /bin/rm
RMDIR?=     /bin/rmdir
SED?=       /usr/bin/sed
SETENV?=    /usr/bin/env
SH?=        /bin/sh
TR?=        /usr/bin/tr
TRUE?=      /usr/bin/true
UNAME?=     /usr/bin/uname
WHICH?=     /usr/bin/which

# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?=      ${ECHO}

# Get the architecture
.if !defined(ARCH)
ARCH!=  ${UNAME} -m
.endif

# Kludge for pre-3.0 systems
MACHINE_ARCH?=  i386

# Get the operating system type
.if !defined(OPSYS)
OPSYS!= ${UNAME} -s
.endif

# Get the operating system revision
.if !defined(OSREL)
OSREL!= ${UNAME} -r | ${SED} -e 's/[-(].*//'
.endif

# Get __FreeBSD_version
.if !defined(OSVERSION)
.if exists(/sbin/sysctl)
OSVERSION!= /sbin/sysctl -n kern.osreldate
.else
OSVERSION!= /usr/sbin/sysctl -n kern.osreldate
.endif
.endif

# Get the object format.
.if !defined(PORTOBJFORMAT)
PORTOBJFORMAT!= test -x /usr/bin/objformat && /usr/bin/objformat || echo aout
.endif

MASTERDIR?= ${.CURDIR}

# If they exist, include Makefile.inc, then architecture/operating
# system specific Makefiles, then local Makefile.local.

.if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc)
.include "${.CURDIR}/../Makefile.inc"
.endif

.if exists(${MASTERDIR}/../Makefile.inc)
.include "${MASTERDIR}/../Makefile.inc"
.endif

.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS})
.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}"
.elif exists(${MASTERDIR}/Makefile.${OPSYS})
.include "${MASTERDIR}/Makefile.${OPSYS}"
.elif exists(${MASTERDIR}/Makefile.${ARCH})
.include "${MASTERDIR}/Makefile.${ARCH}"
.endif

.if exists(${MASTERDIR}/Makefile.local)
.include "${MASTERDIR}/Makefile.local"
.endif

.if !defined(PORTNAME) || !defined(PORTVERSION) || defined(PKGNAME)
.BEGIN:
    @${ECHO} "${PKGNAME}: You need to define PORTNAME and PORTVERSION instead of PKGNAME."
    @${ECHO} "(This port is too old for your bsd.port.mk, please update it to match"
    @${ECHO} " your bsd.port.mk.)"
    @${FALSE}
.endif

PORTREVISION?=  0
.if ${PORTREVISION} != 0
_SUF1=  _${PORTREVISION}
.endif

PORTEPOCH?=     0
.if ${PORTEPOCH} != 0
_SUF2=  ,${PORTEPOCH}
.endif

PKGNAME=    ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}${_SUF1}${_SUF2}
DISTNAME?=  ${PORTNAME}-${PORTVERSION}

# These need to be absolute since we don't know how deep in the ports
# tree we are and thus can't go relative.  They can, of course, be overridden
# by individual Makefiles or local system make configuration.
.if (${OPSYS} == "NetBSD")
PORTSDIR?=      /usr/opt
.else
PORTSDIR?=      /usr/ports
.endif
LOCALBASE?=     ${DESTDIR}/usr/local
X11BASE?=       ${DESTDIR}/usr/X11R6
LINUXBASE?=     ${DESTDIR}/compat/linux
DISTDIR?=       ${PORTSDIR}/distfiles
_DISTDIR?=      ${DISTDIR}/${DIST_SUBDIR}
.if defined(USE_BZIP2)
EXTRACT_SUFX?=          .tar.bz2
.elif defined(USE_ZIP)
EXTRACT_SUFX?=          .zip
.else
EXTRACT_SUFX?=          .tar.gz
.endif
PACKAGES?=      ${PORTSDIR}/packages
TEMPLATES?=     ${PORTSDIR}/Templates

.if (!defined(PATCHDIR) && exists(${MASTERDIR}/patches)) || \
    (!defined(PKGDIR) && exists(${MASTERDIR}/pkg)) || \
    (!defined(MD5_FILE) && exists(${MASTERDIR}/files/md5))
pre-everything::
    @${ECHO} "Error: your port uses an old layout.  Please update it to match this bsd.port.mk."
    @${FALSE}
.endif
PATCHDIR?=      ${MASTERDIR}/files
FILESDIR?=      ${MASTERDIR}/files
SCRIPTDIR?=     ${MASTERDIR}/scripts
PKGDIR?=        ${MASTERDIR}

.if defined(USE_IMAKE)
USE_X_PREFIX=   yes
.endif
.if defined(USE_X_PREFIX)
USE_XLIB=       yes
.endif
.if defined(USE_LINUX_PREFIX)
USE_LINUX=      yes
.endif
.if defined(USE_X_PREFIX)
PREFIX?=        ${X11BASE}
.elif defined(USE_LINUX_PREFIX)
PREFIX?=        ${LINUXBASE}
NO_MTREE=       yes
.else
PREFIX?=        ${LOCALBASE}
.endif

.if defined(USE_OPENSSL)
.if ${OSVERSION} >= 400014
.if !exists(/usr/lib/libcrypto.so)
.BEGIN:
    @${ECHO} "This port requires the OpenSSL library, which is part of"
    @${ECHO} "the FreeBSD crypto distribution but not installed on your"
    @${ECHO} "machine. Please see the \"OpenSSL\" section in the handbook"
    @${ECHO} "(at \"http://www.FreeBSD.org/handbook/openssl.html\", for instance)"
    @${ECHO} "for instructions on how to obtain and install the FreeBSD"
    @${ECHO} "OpenSSL distribution."
    @${FALSE}
.else
OPENSSLBASE=    /usr
OPENSSLDIR=     /etc/ssl
# OpenSSL in the base system may not include IDEA for patent licensing reasons.
.if defined(MAKE_IDEA) && !defined(OPENSSL_IDEA)
OPENSSL_IDEA=   ${MAKE_IDEA}
.else
OPENSSL_IDEA?=  NO
.endif
.if ${OPENSSL_IDEA} == "NO"
# XXX This is a hack to work around the fact that /etc/make.conf clobbers
#     our CFLAGS. It might not be enough for all future ports.
.if defined(HAS_CONFIGURE)
CFLAGS+=        -DNO_IDEA
.else
OPENSSL_CFLAGS+=-DNO_IDEA
.endif
MAKE_ARGS+=     OPENSSL_CFLAGS="${OPENSSL_CFLAGS}"
.endif
.endif
.else
LIB_DEPENDS+=   crypto.1:${PORTSDIR}/security/openssl
OPENSSLBASE?=   ${LOCALBASE}
OPENSSLDIR?=    ${OPENSSLBASE}/openssl
.endif
OPENSSLLIB=     ${OPENSSLBASE}/lib
OPENSSLINC=     ${OPENSSLBASE}/include
MAKE_ENV+=      OPENSSLLIB=${OPENSSLLIB} OPENSSLINC=${OPENSSLINC} \
                OPENSSLBASE=${OPENSSLBASE} OPENSSLDIR=${OPENSSLDIR}
### crypto
#RESTRICTED=        "Contains cryptography."
.endif

.if defined(EMACS_PORT_NAME)
.include "${PORTSDIR}/Mk/bsd.emacs.mk"
.endif

.if defined(USE_PYTHON) || defined(PYTHON_VERSION)
.include "${PORTSDIR}/Mk/bsd.python.mk"
.endif

.if defined(USE_RUBY) || defined(USE_LIBRUBY)
.include "${PORTSDIR}/Mk/bsd.ruby.mk"
.endif

.include "${PORTSDIR}/Mk/bsd.gnome.mk"

# defaults to 3.3.6; will be changed to 4.0 when it is ready
XFREE86_VERSION?=   3

.endif
# End of pre-makefile section.

# Start of post-makefile section.
.if !defined(BEFOREPORTMK)

.if defined(_POSTMKINCLUDED)
.BEGIN:
    @${ECHO} "${PKGNAME}: You cannot include bsd.port[.post].mk twice"
    @${FALSE}
.endif

_POSTMKINCLUDED=    yes

WRKDIR?=        ${WRKDIRPREFIX}${.CURDIR}/work
.if defined(NO_WRKSUBDIR)
WRKSRC?=        ${WRKDIR}
.else
WRKSRC?=        ${WRKDIR}/${DISTNAME}
.endif

PATCH_WRKSRC?=  ${WRKSRC}
CONFIGURE_WRKSRC?=  ${WRKSRC}
BUILD_WRKSRC?=  ${WRKSRC}
INSTALL_WRKSRC?=${WRKSRC}

PLIST_SUB+= OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}

CONFIGURE_ENV+= PORTOBJFORMAT=${PORTOBJFORMAT}
SCRIPTS_ENV+=   PORTOBJFORMAT=${PORTOBJFORMAT}
MAKE_ENV+=      PORTOBJFORMAT=${PORTOBJFORMAT}
PLIST_SUB+=     PORTOBJFORMAT=${PORTOBJFORMAT}

.if defined(MANCOMPRESSED)
.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \
    ${MANCOMPRESSED} != maybe
.BEGIN:
    @${ECHO} "${PKGNAME}: Value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"".
    @${FALSE}
.endif
.endif

.if defined(USE_IMAKE) && ${OPSYS} != OpenBSD && !defined(NO_INSTALL_MANPAGES)
MANCOMPRESSED?= yes
.else
MANCOMPRESSED?= no
.endif

.if defined(USE_QT)
LIB_DEPENDS+=   qt.3:${PORTSDIR}/x11-toolkits/qt145
USE_NEWGCC= yes
.endif

.if defined(USE_QT2)
LIB_DEPENDS+=   qt2.4:${PORTSDIR}/x11-toolkits/qt22
USE_NEWGCC= yes
.endif

.if defined(USE_BZIP2)
BUILD_DEPENDS+=     bzip2:${PORTSDIR}/archivers/bzip2
.endif
.if defined(USE_ZIP)
BUILD_DEPENDS+=     unzip:${PORTSDIR}/archivers/unzip
.endif
.if defined(USE_GMAKE)
BUILD_DEPENDS+=     gmake:${PORTSDIR}/devel/gmake
CONFIGURE_ENV+= MAKE=${GMAKE}
.endif
.if defined(USE_AUTOMAKE)
USE_AUTOCONF=   yes
BUILD_DEPENDS+=     automake:${PORTSDIR}/devel/automake
.endif
.if defined(USE_AUTOCONF)
GNU_CONFIGURE=  yes
BUILD_DEPENDS+=     autoconf:${PORTSDIR}/devel/autoconf
.endif
.if defined(USE_LIBTOOL)
GNU_CONFIGURE=  yes
BUILD_DEPENDS+=     libtool:${PORTSDIR}/devel/libtool
.if defined(USE_AUTOCONF)
LIBTOOLFILES?=      aclocal.m4
.else
LIBTOOLFILES?=      configure
.endif
LIBTOOLFLAGS?=      --disable-ltlibs
.endif
.if defined(USE_NEWGCC) && ${OSVERSION} < 400012
CC=             gcc295
CXX=            g++295
BUILD_DEPENDS+= gcc295:${PORTSDIR}/lang/egcs
MAKE_ENV+=      CC=${CC} CXX=${CXX}
.endif

.if defined(USE_LINUX)
RUN_DEPENDS+=   ${LINUXBASE}/etc/redhat-release:${PORTSDIR}/emulators/linux_base
.endif

.if defined(REQUIRES_MOTIF)
USE_XPM=            yes
.if defined(MOTIF_OPEN)
LIB_DEPENDS+=       Xm.2:${PORTSDIR}/x11-toolkits/open-motif
.else
.if defined(PARALLEL_PACKAGE_BUILD)
BUILD_DEPENDS+=     ${X11BASE}/lib/libXm.a:${PORTSDIR}/x11-toolkits/Motif-dummy
.endif
.endif
.endif

.if defined(USE_FREETYPE)
LIB_DEPENDS+=           ttf.4:${PORTSDIR}/print/freetype
.endif

.if ${XFREE86_VERSION} == 3
.if defined(USE_XPM)
LIB_DEPENDS+=           Xpm.4:${PORTSDIR}/graphics/xpm
.endif
.if defined(USE_DGS)
LIB_DEPENDS+=           dps.0:${PORTSDIR}/x11/dgs
.endif
.if defined(USE_MESA)
LIB_DEPENDS+=           GL.14:${PORTSDIR}/graphics/Mesa3
.endif
XAWVER=                 6
PKG_IGNORE_DEPENDS?=    '(XFree86-3\.3\.6_4|Motif-2\.1\.10)'
.else
.if defined(USE_IMAKE)
BUILD_DEPENDS+=         imake:${PORTSDIR}/devel/imake-4
.endif
.if defined(USE_XPM) || defined(USE_DGS)
USE_XLIB=               yes
.endif
.if defined(USE_MESA)
LIB_DEPENDS+=           GLU.1:${PORTSDIR}/graphics/Mesa3
.endif
XAWVER=                 7
PKG_IGNORE_DEPENDS?=    'Motif-2\.1\.10'
.endif
PLIST_SUB+=             XAWVER=${XAWVER}

.if defined(USE_BISON)
.if ${OSVERSION} >= 400014
BUILD_DEPENDS+= bison:${PORTSDIR}/devel/bison
.endif
.endif

.if ${OSVERSION} >= 500007
PERL_VERSION=   5.6.0
PERL_VER=       5.6.0
PERL_ARCH=      mach
.else
.if ${OSVERSION} >= 300000
PERL_VERSION=   5.00503
.else
PERL_VERSION=   5.00502
.endif
PERL_VER=       5.005
PERL_ARCH=      ${ARCH}-freebsd
.endif
PLIST_SUB+=     PERL_VERSION=${PERL_VERSION} \
                PERL_VER=${PERL_VER} \
                PERL_ARCH=${PERL_ARCH}

.if exists(/usr/bin/perl5) && ${OSVERSION} >= 300000
# 3.0-current after perl5 import
.if !exists(/usr/bin/perl${PERL_VERSION}) && defined(USE_PERL5)
pre-everything::
    @${ECHO} "Error: you don't have the right version of perl in /usr/bin."
    @${FALSE}
.endif
PERL5=          /usr/bin/perl${PERL_VERSION}
PERL=           /usr/bin/perl
.else
PERL5=          ${LOCALBASE}/bin/perl${PERL_VERSION}
PERL=           ${LOCALBASE}/bin/perl
.if defined(USE_PERL5)
BUILD_DEPENDS+= perl${PERL_VERSION}:${PORTSDIR}/lang/perl5
RUN_DEPENDS+=   perl${PERL_VERSION}:${PORTSDIR}/lang/perl5
.endif
.endif

.if defined(USE_XLIB)
.if ${XFREE86_VERSION} == 3
# Don't try to build XFree86-3 even if ALWAYS_BUILD_DEPENDS is defined --
# it's just too big....
.if !defined(ALWAYS_BUILD_DEPENDS)
LIB_DEPENDS+=   X11.6:${PORTSDIR}/x11/XFree86
.endif
.else
LIB_DEPENDS+=   X11.6:${PORTSDIR}/x11/XFree86-4-libraries
.endif
.endif

.include "${PORTSDIR}/Mk/bsd.gnome.mk"

.if exists(${PORTSDIR}/../Makefile.inc)
.include "${PORTSDIR}/../Makefile.inc"
.endif

# Don't change these!!!  These names are built into the _TARGET_USE macro,
# there is no way to refer to them cleanly from within the macro AFAIK.
EXTRACT_COOKIE?=    ${WRKDIR}/.extract_done
CONFIGURE_COOKIE?=  ${WRKDIR}/.configure_done
INSTALL_COOKIE?=    ${WRKDIR}/.install_done
BUILD_COOKIE?=      ${WRKDIR}/.build_done
PATCH_COOKIE?=      ${WRKDIR}/.patch_done
PACKAGE_COOKIE?=    ${WRKDIR}/.package_done

# How to do nothing.  Override if you, for some strange reason, would rather
# do something.
DO_NADA?=       /usr/bin/true

# Use this as the first operand to always build dependency.
NONEXISTENT?=   /nonexistent

# Miscellaneous overridable commands:
GMAKE?=         gmake
AUTOMAKE?=      automake
AUTOCONF?=      autoconf
LIBTOOL?=       libtool
XMKMF?=         xmkmf -a
.if exists(/sbin/md5)
MD5?=           /sbin/md5
.elif exists(/bin/md5)
MD5?=           /bin/md5
.elif exists(/usr/bin/md5)
MD5?=           /usr/bin/md5
.else
MD5?=           md5
.endif
MD5_FILE?=      ${MASTERDIR}/distinfo

MAKE_FLAGS?=    -f
MAKEFILE?=      Makefile
MAKE_ENV+=      PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" LIBDIR="${LIBDIR}" CFLAGS="${CFLAGS}" CXXFLAGS="${CXXFLAGS}"

.if exists(/usr/bin/fetch)
# avoid -A for 2.2 -- it's not ported to that branch
.if ${OSVERSION} < 300000
FETCH_CMD?=     /usr/bin/fetch
.else
FETCH_CMD?=     /usr/bin/fetch -A
.endif
#FETCH_BEFORE_ARGS+=    $${CKSIZE:+-S $$CKSIZE}
.else
FETCH_CMD?=     /usr/bin/ftp
.endif

TOUCH?=         /usr/bin/touch
TOUCH_FLAGS?=   -f

PATCH?=         /usr/bin/patch
PATCH_STRIP?=   -p0
PATCH_DIST_STRIP?=  -p0
.if defined(PATCH_DEBUG)
PATCH_DEBUG_TMP=    yes
PATCH_ARGS?=    -d ${PATCH_WRKSRC} -E ${PATCH_STRIP}
PATCH_DIST_ARGS?=   -d ${PATCH_WRKSRC} -E ${PATCH_DIST_STRIP}
.else
PATCH_DEBUG_TMP=    no
PATCH_ARGS?=    -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_STRIP}
PATCH_DIST_ARGS?=   -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
.endif
.if defined(BATCH)
PATCH_ARGS+=        --batch
PATCH_DIST_ARGS+=   --batch
.endif

.if defined(PATCH_CHECK_ONLY)
PATCH_ARGS+=    -C
PATCH_DIST_ARGS+=   -C
.endif

.if exists(/bin/tar)
TAR?=   /bin/tar
.else
TAR?=   /usr/bin/tar
.endif

# EXTRACT_SUFX is defined in .pre.mk section
.if defined(USE_ZIP)
EXTRACT_CMD?=           unzip
EXTRACT_BEFORE_ARGS?=   -q
EXTRACT_AFTER_ARGS?=    -d ${WRKDIR}
.else
EXTRACT_BEFORE_ARGS?=   -dc
EXTRACT_AFTER_ARGS?=    | ${TAR} -xf -
.if defined(USE_BZIP2)
EXTRACT_CMD?=           bzip2
.else
EXTRACT_CMD?=           ${GZIP_CMD}
.endif
.endif

# Figure out where the local mtree file is
.if !defined(MTREE_FILE) && !defined(NO_MTREE)
.if defined(USE_X_PREFIX)
.if ${XFREE86_VERSION} == 3
MTREE_FILE= /etc/mtree/BSD.x11.dist
.else
MTREE_FILE= /etc/mtree/BSD.x11-4.dist
.endif
.else
MTREE_FILE= /etc/mtree/BSD.local.dist
.endif
.endif
MTREE_CMD?= /usr/sbin/mtree
MTREE_ARGS?=    -U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p

# A few aliases for *-install targets
INSTALL_PROGRAM= \
    ${INSTALL} ${COPY} ${STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_SCRIPT= \
    ${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_DATA= \
    ${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
INSTALL_MAN= \
    ${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}

INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
            BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
            BSD_INSTALL_DATA="${INSTALL_DATA}" \
            BSD_INSTALL_MAN="${INSTALL_MAN}"
MAKE_ENV+=  ${INSTALL_MACROS}
SCRIPTS_ENV+=   ${INSTALL_MACROS}

# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
.undef NO_PACKAGE
.endif

COMMENT?=       ${PKGDIR}/pkg-comment
DESCR?=         ${PKGDIR}/pkg-descr
PLIST?=         ${PKGDIR}/pkg-plist
PKGINSTALL?=    ${PKGDIR}/pkg-install
PKGDEINSTALL?=  ${PKGDIR}/pkg-deinstall
PKGREQ?=        ${PKGDIR}/pkg-req
PKGMESSAGE?=    ${PKGDIR}/pkg-message

TMPPLIST?=  ${WRKDIR}/.PLIST.mktmp

PKG_CMD?=       /usr/sbin/pkg_create
PKG_DELETE?=    /usr/sbin/pkg_delete
PKG_INFO?=      /usr/sbin/pkg_info
.if !defined(PKG_ARGS)
PKG_ARGS=       -v -c ${COMMENT} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`${MAKE} package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | sort -u`" ${EXTRA_PKG_ARGS}
.if exists(${PKGINSTALL})
PKG_ARGS+=      -i ${PKGINSTALL}
.endif
.if exists(${PKGDEINSTALL})
PKG_ARGS+=      -k ${PKGDEINSTALL}
.endif
.if exists(${PKGREQ})
PKG_ARGS+=      -r ${PKGREQ}
.endif
.if exists(${PKGMESSAGE})
PKG_ARGS+=      -D ${PKGMESSAGE}
.endif
.if !defined(NO_MTREE)
PKG_ARGS+=      -m ${MTREE_FILE}
.endif
.endif
.if defined(PKG_NOCOMPRESS)
PKG_SUFX?=      .tar
.else
PKG_SUFX?=      .tgz
.endif
# where pkg_add records its dirty deeds.
PKG_DBDIR?=     /var/db/pkg

# shared/dynamic motif libs
.if defined(HAVE_MOTIF)
.if defined(MOTIF_STATIC) && !defined(MOTIF_OPEN)
MOTIFLIB?=  ${X11BASE}/lib/libXm.a -L${X11BASE}/lib -lXp
.else
MOTIFLIB?=  -L${X11BASE}/lib -lXm -lXp
.endif
.endif

ALL_TARGET?=        all
INSTALL_TARGET?=    install

# Popular master sites
.include "bsd.sites.mk"

# Empty declaration to avoid "variable MASTER_SITES recursive" error
MASTER_SITES?=
PATCH_SITES?=

# Substitute subdirectory names
.if defined(MASTER_SITE_SUBDIR)
.for dir in ${MASTER_SITE_SUBDIR}
MASTER_SITES_TMP+=  ${MASTER_SITES:S^%SUBDIR%^${dir}^}
.endfor
.else
MASTER_SITES_TMP=   ${MASTER_SITES:S^%SUBDIR%/^^}
.endif
MASTER_SITES:=  ${MASTER_SITES_TMP}
.if defined(PATCH_SITE_SUBDIR)
.for dir in ${PATCH_SITE_SUBDIR}
PATCH_SITES_TMP+=   ${PATCH_SITES:S^%SUBDIR%^${dir}^}
.endfor
.else
PATCH_SITES_TMP=    ${PATCH_SITES:S^%SUBDIR%/^^}
.endif
PATCH_SITES:=   ${PATCH_SITES_TMP}

# The primary backup site.
MASTER_SITE_BACKUP?=    \
    ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
MASTER_SITE_BACKUP:=    ${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^}

# If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository
# for everything, but don't search it twice by appending it to the end.
.if defined(MASTER_SITE_FREEBSD)
_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_BACKUP}
_MASTER_SITE_BACKUP:=   # empty
.else
_MASTER_SITE_OVERRIDE=  ${MASTER_SITE_OVERRIDE}
_MASTER_SITE_BACKUP=    ${MASTER_SITE_BACKUP}
.endif

# Search CDROM first if mounted, symlink instead of copy if
# FETCH_SYMLINK_DISTFILES is set
CD_MOUNTPT?=    /cdrom
.if exists(${CD_MOUNTPT}/ports/distfiles)
_MASTER_SITE_OVERRIDE:= file:${CD_MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${_MASTER_SITE_OVERRIDE}
.if defined(FETCH_SYMLINK_DISTFILES)
FETCH_BEFORE_ARGS+= -l
.endif
.endif

#
# Sort the master site list according to the patterns in MASTER_SORT
#
MASTER_SORT?=
MASTER_SORT_REGEX?=
MASTER_SORT_REGEX+= ${MASTER_SORT:S|.|\\.|g:S|^|//[^/]*|:S|$|/|}

MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX}"; }
.for srt in ${MASTER_SORT_REGEX}
MASTER_SORT_AWK+= /${srt:S^/^\\/^g}/ { good["${srt}"] = good["${srt}"] " " $$0 ; next; } 
.endfor
MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; }
SORTED_MASTER_SITES_CMD=    cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites
SORTED_PATCH_SITES_CMD=     cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites

master-sites:
    @echo ${_MASTER_SITE_OVERRIDE} `echo '${MASTER_SITES}' | ${AWK} '${MASTER_SORT_AWK}'` ${_MASTER_SITE_BACKUP}
patch-sites:
    @echo ${_MASTER_SITE_OVERRIDE} `echo '${PATCH_SITES}' | ${AWK} '${MASTER_SORT_AWK}'` ${_MASTER_SITE_BACKUP}

DISTFILES?=     ${DISTNAME}${EXTRACT_SUFX}
ALLFILES?=  ${DISTFILES} ${PATCHFILES}

.if defined(IGNOREFILES)
.if !defined(CKSUMFILES)
CKSUMFILES!=    \
    for file in ${ALLFILES}; do \
        ignore=0; \
        for tmp in ${IGNOREFILES}; do \
            if [ "$$file" = "$$tmp" ]; then \
                ignore=1; \
            fi; \
        done; \
        if [ "$$ignore" = 0 ]; then \
            echo "$$file"; \
        fi; \
    done
.endif
.else
CKSUMFILES=     ${ALLFILES}
.endif

# List of all files, with ${DIST_SUBDIR} in front.  Used for checksum.
.if defined(DIST_SUBDIR)
_CKSUMFILES?=   ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
_IGNOREFILES?=  ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
.else
_CKSUMFILES?=   ${CKSUMFILES}
_IGNOREFILES?=  ${IGNOREFILES}
.endif

# This is what is actually going to be extracted, and is overridable
#  by user.
EXTRACT_ONLY?=  ${DISTFILES}

# Documentation
MAINTAINER?=    ports@FreeBSD.org

.if !target(maintainer)
maintainer:
    @${ECHO} ${MAINTAINER}
.endif

.if !defined(CATEGORIES)
.BEGIN:
    @${ECHO} "${PKGNAME}: CATEGORIES is mandatory."
    @${FALSE}
.else
VALID_CATEGORIES+=  afterstep archivers astro audio benchmarks biology \
    cad chinese comms converters databases deskutils devel \
    editors elisp emulators french ftp games german gnome graphics \
    hebrew ipv6 irc japanese java kde korean lang linux \
    mail math mbone misc net news \
    offix palm perl5 plan9 print python ruby russian \
    security shells sysutils \
    tcl76 tcl80 tcl81 tcl82 tcl83 textproc \
    tk42 tk80 tk82 tk83 tkstep80 \
    vietnamese windowmaker www \
    x11 x11-clocks x11-fm x11-fonts x11-servers x11-toolkits x11-wm zope
check-categories:
.for cat in ${CATEGORIES}
    @if ${ECHO} ${VALID_CATEGORIES} | ${GREP} -wq ${cat}; then \
        ${TRUE}; \
    else \
        ${ECHO} "${PKGNAME}: category ${cat} not in list of valid categories."; \
        ${FALSE}; \
    fi
.endfor
.endif

PKGREPOSITORYSUBDIR?=   All
PKGREPOSITORY?=     ${PACKAGES}/${PKGREPOSITORYSUBDIR}
.if exists(${PACKAGES})
PKGFILE?=       ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
.else
PKGFILE?=       ${.CURDIR}/${PKGNAME}${PKG_SUFX}
.endif

# The "latest version" link -- ${PKGNAME} minus everthing after the last '-'
PKGLATESTREPOSITORY?=   ${PACKAGES}/Latest
PKGBASE?=           ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}
PKGLATESTFILE?=     ${PKGLATESTREPOSITORY}/${PKGBASE}${PKG_SUFX}

.if defined(PERL_CONFIGURE)
CONFIGURE_ARGS+=    CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}"
CONFIGURE_SCRIPT?=  Makefile.PL
USE_PERL5=          yes
.undef HAS_CONFIGURE
.endif

CONFIGURE_SCRIPT?=  configure
CONFIGURE_TARGET?=  ${MACHINE_ARCH}--freebsd${OSREL}
CONFIGURE_LOG?=     config.log

.if defined(GNU_CONFIGURE)
CONFIGURE_ARGS+=    --prefix=${PREFIX} ${CONFIGURE_TARGET}
HAS_CONFIGURE=      yes
.endif

# Passed to most of script invocations
SCRIPTS_ENV+=   CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \
          WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
          SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
          PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \
          PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}

.if defined(BATCH)
SCRIPTS_ENV+=   BATCH=yes
.endif

MANPREFIX?= ${PREFIX}

.for sect in 1 2 3 4 5 6 7 8 9
MAN${sect}PREFIX?=  ${MANPREFIX}
.endfor
MANLPREFIX?=    ${MANPREFIX}
MANNPREFIX?=    ${MANPREFIX}

MANLANG?=   ""  # english only by default

.if !defined(NOMANCOMPRESS)
MANEXT= .gz
.endif

.if (defined(MLINKS) || defined(_MLINKS_PREPEND)) && !defined(_MLINKS)
__pmlinks!= ${ECHO} '${MLINKS:S/    / /}' | ${AWK} \
 '{ if (NF % 2 != 0) { print "broken"; exit; } \
    for (i=1; i<=NF; i++) { \
        if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \
            { $$i = $$(i-2); printf " " $$i " "; } \
        else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \
            printf " " $$i " "; \
        else \
            { print "broken"; exit; } \
    } \
  }' | ${SED} -e 's \([^/ ][^ ]*\.\(.\)[^. ]*\) $${MAN\2PREFIX}/man/$$$$$$$${__lang}/man\2/\1.gzg' -e 's/ //g' -e 's/MANlPREFIX/MANLPREFIX/g' -e 's/MANnPREFIX/MANNPREFIX/g'
.if ${__pmlinks:Mbroken} == "broken"
.BEGIN:
    @${ECHO} "${PKGNAME}: Unable to parse MLINKS."
    @${FALSE}
.endif
_MLINKS=    ${_MLINKS_PREPEND}
.for lang in ${MANLANG}
.for ___pmlinks in ${__pmlinks}
.for __lang in ${lang}
_MLINKS+=   ${___pmlinks:S// /g}
.endfor
.endfor
.endfor
.endif

.for lang in ${MANLANG}

.for sect in 1 2 3 4 5 6 7 8 9
.if defined(MAN${sect})
_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%}
.endif
.endfor

.if defined(MANL)
_MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%}
.endif

.if defined(MANN)
_MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%}
.endif

.endfor

.if defined(_MLINKS) && make(generate-plist)
_TMLINKS!=  ${ECHO} ${_MLINKS} | ${AWK} '{for (i=2; i<=NF; i+=2) print $$i}'
.else
_TMLINKS=
.endif

.if defined(_MANPAGES) && defined(NOMANCOMPRESS)
__MANPAGES:=    ${_MANPAGES:S^${PREFIX}/^^:S/""//:S^//^/^g}
.elif defined(_MANPAGES)
__MANPAGES:=    ${_MANPAGES:S^${PREFIX}/^^:S/""//:S^//^/^g:S/$/.gz/}
.endif

.if defined(_MANPAGES) && ${MANCOMPRESSED} == "yes"
_MANPAGES:= ${_MANPAGES:S/$/.gz/}
.endif

.if ${XFREE86_VERSION} == 3
XFREE86_HTML_MAN=   no
.else
.if defined(USE_IMAKE)
XFREE86_HTML_MAN?=  yes
.else
XFREE86_HTML_MAN?=  no
.endif
.endif

# Put this for down as possible so it will catch all PLIST_SUB definitions.

.if defined(INSTALLS_SHLIB)
LDCONFIG_DIRS?= %%PREFIX%%/lib
LDCONFIG_PLIST!=    ${ECHO} ${LDCONFIG_DIRS} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/}
LDCONFIG_RUNLIST!=  ${ECHO} ${LDCONFIG_PLIST} | ${SED} -e "s!%D!${PREFIX}!"
.endif

.MAIN: all

################################################################
# Many ways to disable a port.
#
# If we're in BATCH mode and the port is interactive, or we're
# in interactive mode and the port is non-interactive, skip all
# the important targets.  The reason we have two modes is that
# one might want to leave a build in BATCH mode running
# overnight, then come back in the morning and do _only_ the
# interactive ones that required your intervention.
#
# Don't attempt to build ports that require Motif if you don't
# have Motif.
#
# Ignore ports that can't be resold if building for a CDROM.
#
# Don't build a port if it's restricted and we don't want to get
# into that.
#
# Don't build a port on an ELF machine if it's broken for ELF.
#
# Don't build a port if it's broken, unless we're running a parallel
# build (in case it's fixed).
#
# Don't build a port if it's forbidden for whatever reason.
#
# Don't build a port if the system is too old.
################################################################

.if ${OSVERSION} >= 300000
# You need an upgrade kit or make world newer than this
BSDPORTMKVERSION=   20000201
.if exists(/var/db/port.mkversion)
VERSIONFILE=    /var/db/port.mkversion
.else
VERSIONFILE=    ${PKG_DBDIR}/.mkversion
.endif
.if exists(${VERSIONFILE})
.if !defined(SYSTEMVERSION)
SYSTEMVERSION!= cat ${VERSIONFILE}
.endif
.else
SYSTEMVERSION=  0
.endif
.if ${BSDPORTMKVERSION} > ${SYSTEMVERSION}
IGNORE= ": Your system is too old to use this bsd.port.mk.  You need a fresh make world or an upgrade kit.  Please go to http://www.FreeBSD.org/ports/ or a mirror site and follow the instructions"
.endif
.endif

.if defined(ONLY_FOR_ARCHS)
.for __ARCH in ${ONLY_FOR_ARCHS}
.if ${MACHINE_ARCH:M${__ARCH}} != ""
__ARCH_OK?=     1
.endif
.endfor
.else
__ARCH_OK?=     1
.endif

.if defined(NOT_FOR_ARCHS)
.for __NARCH in ${NOT_FOR_ARCHS}
.if ${MACHINE_ARCH:M${__NARCH}} != ""
.undef __ARCH_OK
.endif
.endfor
.endif

.if !defined(__ARCH_OK)
.if defined(ONLY_FOR_ARCHS)
IGNORE=     "is only for ${ONLY_FOR_ARCHS},"
.else # defined(NOT_FOR_ARCHS)
IGNORE=     "does not run on ${NOT_FOR_ARCHS},"
.endif
IGNORE+=    "and you are running ${ARCH}"
.endif

.if !defined(NO_IGNORE)
.if (defined(IS_INTERACTIVE) && defined(BATCH))
IGNORE= "is an interactive port"
.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
IGNORE= "is not an interactive port"
.elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF))
IGNORE= "requires Motif.  LessTif is an LGPL implementation of the Motif API.  A port is available in ports/x11-toolkits/lesstif.  Please see /etc/make.conf"
.elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF))
IGNORE= "does not require Motif"
.elif (defined(NO_CDROM) && defined(FOR_CDROM))
IGNORE= "may not be placed on a CDROM: ${NO_CDROM}"
.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
IGNORE= "is restricted: ${RESTRICTED}"
.elif defined(NO_WRKDIR)
IGNORE= "defines NO_WRKDIR, which is obsoleted.  If you are defining NO_WRKDIR and NO_EXTRACT, try changing it to NO_WRKSUBDIR=yes and EXTRACT_ONLY= \(the right side intentionally left empty\)"
.elif defined(NO_EXTRACT)
IGNORE= "defines NO_EXTRACT, which is obsoleted.  Try changing it to EXTRACT_ONLY= \(the right side intentionally left empty\)"
.elif defined(NO_CONFIGURE)
IGNORE= "defines NO_CONFIGURE, which is obsoleted"
.elif defined(NO_PATCH)
IGNORE= "defines NO_PATCH, which is obsoleted"
.elif defined(BROKEN_ELF) && (${PORTOBJFORMAT} == "elf") && \
      !defined(PARALLEL_PACKAGE_BUILD)
IGNORE= "is broken for ELF: ${BROKEN_ELF}"
.elif defined(BROKEN)
.if defined(PARALLEL_PACKAGE_BUILD)
# try building even if marked BROKEN
TRYBROKEN=  yes
.else
IGNORE= "is marked as broken: ${BROKEN}"
.endif
.elif defined(FORBIDDEN)
IGNORE= "is forbidden: ${FORBIDDEN}"
.endif

.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING) && !defined(PARALLEL_PACKAGE_BUILD))
IGNORE= "has to be built manually: ${MANUAL_PACKAGE_BUILD}"
clean:
    @${IGNORECMD}
.endif

.if defined(IGNORE)
.if defined(IGNORE_SILENT)
IGNORECMD=  ${DO_NADA}
.else
IGNORECMD=  ${ECHO_MSG} "===>  ${PKGNAME} ${IGNORE}."
.endif
fetch:
    @${IGNORECMD}
checksum:
    @${IGNORECMD}
extract:
    @${IGNORECMD}
patch:
    @${IGNORECMD}
configure:
    @${IGNORECMD}
all:
    @${IGNORECMD}
build:
    @${IGNORECMD}
install:
    @${IGNORECMD}
reinstall:
    @${IGNORECMD}
package:
    @${IGNORECMD}
.endif

.endif

.if defined(IGNORE) || defined(NO_PACKAGE)
ignorelist: package-name
.else
ignorelist:
    @${DO_NADA}
.endif

################################################################
# Clean directories for ftp or CDROM.
################################################################

.if defined(RESTRICTED)
clean-restricted:   delete-distfiles delete-package
clean-restricted-list: delete-distfiles-list delete-package-list
RESTRICTED_FILES?=  ${DISTFILES} ${PATCHFILES}
.else
clean-restricted:
clean-restricted-list:
.endif

.if defined(NO_CDROM)
clean-for-cdrom:    delete-distfiles delete-package
clean-for-cdrom-list:   delete-distfiles-list delete-package-list
RESTRICTED_FILES?=  ${DISTFILES} ${PATCHFILES}
.else
clean-for-cdrom:
clean-for-cdrom-list:
.endif

.if defined(ALL_HOOK)
all:
    @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
      DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
      PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
      FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
      DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \
      RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
    ${ALL_HOOK}
.endif

.if !target(all)
all: build
.endif

.if !defined(DEPENDS_TARGET)
.if make(reinstall)
DEPENDS_TARGET= reinstall
.else
DEPENDS_TARGET= install
.endif
.if defined(DEPENDS_CLEAN)
DEPENDS_TARGET+=    clean
DEPENDS_ARGS+=  NOCLEANDEPENDS=yes
.endif
.else
DEPENDS_ARGS+=  FORCE_PKG_REGISTER=yes
.endif
.if defined(DEPENDS)
# pretty much guarantees overwrite of existing installation
.MAKEFLAGS: FORCE_PKG_REGISTER=yes
.endif

################################################################
# The following are used to create easy dummy targets for
# disabling some bit of default target behavior you don't want.
# They still check to see if the target exists, and if so don't
# do anything, since you might want to set this globally for a
# group of ports in a Makefile.inc, but still be able to
# override from an individual Makefile.
################################################################

# Disable checksum
.if defined(NO_CHECKSUM) && !target(checksum)
checksum: fetch
    @${DO_NADA}
.endif

# Disable build
.if defined(NO_BUILD) && !target(build)
build: configure
    @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif

# Disable install
.if defined(NO_INSTALL) && !target(install)
install: build
    @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif

# Disable package
.if defined(NO_PACKAGE) && !target(package)
package:
.if defined(IGNORE_SILENT)
    @${DO_NADA}
.else
    @${ECHO_MSG} "===>  ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
.endif
.endif

# Disable describe
.if defined(NO_DESCRIBE) && !target(describe)
describe:
    @${DO_NADA}
.endif

################################################################
# More standard targets start here.
#
# These are the body of the build/install framework.  If you are
# not happy with the default actions, and you can't solve it by
# adding pre-* or post-* targets/scripts, override these.
################################################################

# Fetch

.if !target(do-fetch)
do-fetch:
    @${MKDIR} ${_DISTDIR}
    @(cd ${_DISTDIR}; \
     for file in ${DISTFILES}; do \
        if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
            if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
                ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
                ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
                ${ECHO_MSG} ">> Please correct this problem and try again."; \
                exit 1; \
            fi ; \
            if [ -f ${MD5_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \
                if ! ${GREP} -q "^MD5 (.*$$file)" ${MD5_FILE}; then \
                    ${ECHO_MSG} ">> $$file is not in ${MD5_FILE}."; \
                    ${ECHO_MSG} ">> Either ${MD5_FILE} is out of date, or"; \
                    ${ECHO_MSG} ">> $$file is spelled incorrectly."; \
                    exit 1; \
                fi; \
            fi; \
            ${ECHO_MSG} ">> $$file doesn't seem to exist in ${_DISTDIR}."; \
            for site in `${SORTED_MASTER_SITES_CMD}`; do \
                ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
                DIR=${DIST_SUBDIR}; \
                CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
                case $${file} in \
                */*)    ${MKDIR} $${file%/*}; \
                        args="-o $${file} $${site}$${file}";; \
                *)      args=$${site}$${file};; \
                esac; \
                if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
                    continue 2; \
                fi \
            done; \
            ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
            ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
            exit 1; \
        fi \
     done)
.if defined(PATCHFILES)
    @(cd ${_DISTDIR}; \
     for file in ${PATCHFILES}; do \
        if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
            if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
                ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
                ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
                ${ECHO_MSG} ">> Please correct this problem and try again."; \
                exit 1; \
            fi ; \
            ${ECHO_MSG} ">> $$file doesn't seem to exist in ${_DISTDIR}."; \
            for site in `${SORTED_PATCH_SITES_CMD}`; do \
                ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
                DIR=${DIST_SUBDIR}; \
                CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
                case $${file} in \
                */*)    ${MKDIR} $${file%/*}; \
                        args="-o $${file} $${site}$${file}";; \
                *)      args=$${site}$${file};; \
                esac; \
                if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
                    continue 2; \
                fi \
            done; \
            ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
            ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
            exit 1; \
        fi \
     done)
.endif
.endif

# Extract

.if !target(do-extract)
do-extract:
    @${RM} -rf ${WRKDIR}
    @${MKDIR} ${WRKDIR}
    @for file in ${EXTRACT_ONLY}; do \
        if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
        then \
            exit 1; \
        fi \
    done
.if !defined(EXTRACT_PRESERVE_OWNERSHIP)
    @if [ `id -u` = 0 ]; then \
        ${CHMOD} -R ug-s ${WRKDIR}; \
        ${CHOWN} -R 0:0 ${WRKDIR}; \
    fi
.endif
.endif

# Patch

.if !target(do-patch)
do-patch:
.if defined(PATCHFILES)
    @${ECHO_MSG} "===>  Applying distribution patches for ${PKGNAME}"
    @(cd ${_DISTDIR}; \
      for i in ${PATCHFILES}; do \
        if [ ${PATCH_DEBUG_TMP} = yes ]; then \
            ${ECHO_MSG} "===>   Applying distribution patch $$i" ; \
        fi; \
        case $$i in \
            *.Z|*.gz) \
                ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
                ;; \
            *) \
                ${PATCH} ${PATCH_DIST_ARGS} < $$i; \
                ;; \
        esac; \
      done)
.endif
.if defined(EXTRA_PATCHES)
    @for i in ${EXTRA_PATCHES}; do \
        ${ECHO_MSG} "===>  Applying extra patch $$i"; \
        ${PATCH} ${PATCH_ARGS} < $$i; \
    done
.endif
    @if [ -d ${PATCHDIR} ]; then \
        if [ "`echo ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \
            ${ECHO_MSG} "===>  Applying ${OPSYS} patches for ${PKGNAME}" ; \
            PATCHES_APPLIED="" ; \
            for i in ${PATCHDIR}/patch-*; do \
                case $$i in \
                    *.orig|*.rej|*~) \
                        ${ECHO_MSG} "===>   Ignoring patchfile $$i" ; \
                        ;; \
                    *) \
                        if [ ${PATCH_DEBUG_TMP} = yes ]; then \
                            ${ECHO_MSG} "===>   Applying ${OPSYS} patch $$i" ; \
                        fi; \
                        if ${PATCH} ${PATCH_ARGS} < $$i ; then \
                            PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \
                        else \
                            ${ECHO_MSG} `${ECHO} ">> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \
                            if [ x"$$PATCHES_APPLIED" != x"" ]; then \
                                ${ECHO_MSG} `${ECHO} ">> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \
                            fi; \
                            ${FALSE} ; \
                        fi; \
                        ;; \
                esac; \
            done; \
        fi; \
    fi
.endif

# Configure

.if !target(do-configure)
do-configure:
.if defined(USE_AUTOMAKE)
    @(cd ${CONFIGURE_WRKSRC} && ${AUTOMAKE})
.endif
.if defined(USE_AUTOCONF)
    @(cd ${CONFIGURE_WRKSRC} && ${AUTOCONF})
.endif
    @if [ -f ${SCRIPTDIR}/configure ]; then \
        cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
          ${SCRIPTDIR}/configure; \
    fi
.if defined(HAS_CONFIGURE)
    @(cd ${CONFIGURE_WRKSRC} && \
        if ! ${SETENV} CC="${CC}" CXX="${CXX}" \
        CFLAGS="${CFLAGS}" CXXFLAGS="${CXXFLAGS}" \
        INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
        INSTALL_DATA="${INSTALL_DATA}" \
        INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
        INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
        ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \
            ${ECHO} "===>  Script \"${CONFIGURE_SCRIPT}\" failed: here are the contents of \"${CONFIGURE_LOG}\""; \
            ${CAT} ${CONFIGURE_LOG}; \
            ${ECHO} "(end of \"${CONFIGURE_LOG}\")"; \
            ${FALSE}; \
        fi)
.endif
.if defined(PERL_CONFIGURE)
    @cd ${CONFIGURE_WRKSRC} && \
        ${SETENV} ${CONFIGURE_ENV} \
        ${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
.endif
.if defined(USE_IMAKE)
    @(cd ${CONFIGURE_WRKSRC}; ${SETENV} ${MAKE_ENV} ${XMKMF})
.endif
.endif

# Build

.if !target(do-build)
do-build:
.if defined(USE_GMAKE)
    @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET})
.else
    @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET})
.endif
.endif

# Install

.if !target(do-install)
do-install:
.if defined(USE_GMAKE)
    @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
    @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
.endif
.else defined(USE_GMAKE)
    @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
    @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
.endif
.endif
.endif

# Package

.if !target(do-package)
do-package: ${TMPPLIST}
    @${ECHO_MSG} "===>  Building package for ${PKGNAME}"
    @if [ -d ${PACKAGES} ]; then \
        if [ ! -d ${PKGREPOSITORY} ]; then \
            if ! ${MKDIR} ${PKGREPOSITORY}; then \
                ${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
                exit 1; \
            fi; \
        fi; \
    fi
    @__softMAKEFLAGS='${__softMAKEFLAGS:S/'/'\''/g}'; \
    if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
        if [ -d ${PACKAGES} ]; then \
            eval ${MAKE} $${__softMAKEFLAGS} package-links; \
        fi; \
    else \
        eval ${MAKE} $${__softMAKEFLAGS} delete-package; \
        exit 1; \
    fi
.endif

# Some support rules for do-package

.if !target(package-links)
package-links:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} delete-package-links
    @for cat in ${CATEGORIES}; do \
        if [ ! -d ${PACKAGES}/$$cat ]; then \
            if ! ${MKDIR} ${PACKAGES}/$$cat; then \
                ${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
                exit 1; \
            fi; \
        fi; \
        ${LN} -sf `${ECHO} $$cat | ${SED} -e 'sa[^/]*a..ag'`/${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
    done
.if !defined(NO_LATEST_LINK)
    @if [ ! -d ${PKGLATESTREPOSITORY} ]; then \
        if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \
            ${ECHO_MSG} ">> Can't create directory ${PKGLATESTREPOSITORY}."; \
            exit 1; \
        fi; \
    fi
    @${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE}
.endif
.endif

.if !target(delete-package-links)
delete-package-links:
    @for cat in ${CATEGORIES}; do \
        ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
    done
.if !defined(NO_LATEST_LINK)
    @${RM} -f ${PKGLATESTFILE}
.endif
.endif

.if !target(delete-package)
delete-package:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} delete-package-links
    @${RM} -f ${PKGFILE}
.endif

.if !target(delete-package-links-list)
delete-package-links-list:
    @for cat in ${CATEGORIES}; do \
        ${ECHO} ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
    done
.if !defined(NO_LATEST_LINK)
    @${ECHO} ${RM} -f ${PKGLATESTFILE}
.endif
.endif

.if !target(delete-package-list)
delete-package-list:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} delete-package-links-list
    @${ECHO} "[ -f ${PKGFILE} ] && (${ECHO} deleting ${PKGFILE}; ${RM} -f ${PKGFILE})"
.endif

################################################################
# This is the "generic" port target, actually a macro used from the
# six main targets.  See below for more.
################################################################

_PORT_USE: .USE
.if make(real-fetch)
.if defined(TRYBROKEN)
    @${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN."
.endif
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch-depends
.endif
.if make(real-extract)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} checksum REAL_EXTRACT=yes
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} build-depends lib-depends misc-depends
.endif
.if make(real-install)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} check-categories
.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
    @if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \
        ${ECHO} "===>  ${PKGNAME} is already installed - perhaps an older version?"; \
        ${ECHO} "      If so, you may wish to \`\`make deinstall'' and install"; \
        ${ECHO} "      this port again by \`\`make reinstall'' to upgrade it properly."; \
        ${ECHO} "      If you really wish to overwrite the old port of ${PKGNAME}"; \
        ${ECHO} "      without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
        ${ECHO} "      in your environment or the \"make install\" command line."; \
        exit 1; \
    fi
.endif
    @if [ `${SH} -c umask` != 0022 ]; then \
        ${ECHO_MSG} "===>  Warning: your umask is \"`${SH} -c umask`"\".; \
        ${ECHO_MSG} "      If this is not desired, set it to an appropriate value"; \
        ${ECHO_MSG} "      and install this port again by \`\`make reinstall''."; \
    fi
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} run-depends lib-depends
.endif
.if make(real-install)
    @${MKDIR} ${PREFIX}
    @if [ `id -u` != 0 ]; then \
        if [ -w ${PREFIX}/ ]; then \
            ${ECHO_MSG} "Warning: not superuser, you may get some errors during installation."; \
        else \
            ${ECHO_MSG} "Error: ${PREFIX}/ not writable."; \
            ${FALSE}; \
        fi; \
    fi
.if !defined(NO_MTREE)
    @if [ `id -u` = 0 ]; then \
        if [ ! -f ${MTREE_FILE} ]; then \
            ${ECHO} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
            ${ECHO} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
            exit 1; \
        else \
            ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \
        fi; \
    else \
        ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
        ${ECHO_MSG} "You may want to become root and try again to ensure correct permissions."; \
    fi
.endif
.endif
.if make(real-configure) && defined(USE_LIBTOOL)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-libtool
.endif
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.TARGET:S/^real-/pre-/}
    @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
        cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
            ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
    fi
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.TARGET:S/^real-/do-/}
# put here so ports can change the contents of ${TMPPLIST} if necessary
.if make(real-install)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} generate-plist
.endif
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.TARGET:S/^real-/post-/}
    @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
        cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
            ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
    fi
.if make(real-install) && (defined(_MANPAGES) || defined(_MLINKS))
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} compress-man
.endif
.if make(real-install) && defined(INSTALLS_SHLIB)
    @${ECHO_MSG} "===>   Running ldconfig"
    ${LDCONFIG} -m ${LDCONFIG_RUNLIST}
.endif
.if make(real-install) && !defined(NO_PKG_REGISTER)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fake-pkg
.endif
.if !make(real-fetch) \
    && (!make(real-patch) || !defined(PATCH_CHECK_ONLY)) \
    && (!make(real-package) || !defined(PACKAGE_NOINSTALL))
    @${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.${.TARGET:S/^real-//}_done
.endif

################################################################
# Skeleton targets start here
# 
# You shouldn't have to change these.  Either add the pre-* or
# post-* targets/scripts or redefine the do-* targets.  These
# targets don't do anything other than checking for cookies and
# call the necessary targets/scripts.
################################################################

.if !target(pre-everything)
pre-everything:
    @${DO_NADA}
.endif

.if !target(fetch)
fetch:  pre-everything
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} real-fetch
.endif

.if !target(extract)
extract: ${EXTRACT_COOKIE}
.endif

.if !target(patch)
patch: ${PATCH_COOKIE}
.endif

.if !target(configure)
configure: ${CONFIGURE_COOKIE}
.endif

.if !target(build)
build: ${BUILD_COOKIE}
.endif

.if !target(install)
install: ${INSTALL_COOKIE}
.endif

.if !target(package)
package: ${PACKAGE_COOKIE}
.endif

${EXTRACT_COOKIE}:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} real-extract
${PATCH_COOKIE}:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} extract
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} real-patch
${CONFIGURE_COOKIE}:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} real-configure
${BUILD_COOKIE}:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} configure
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} real-build
${INSTALL_COOKIE}:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} build
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} real-install
# Scan PLIST for setugid files and startup scripts
    -@for i in `${GREP} -v '^@' ${TMPPLIST}`; do \
        /usr/bin/find ${PREFIX}/$$i -prune -type f \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) -ls 2>/dev/null; \
    done > ${WRKDIR}/.PLIST.setuid; \
    ${GREP} '^etc/rc.d/' ${TMPPLIST} > ${WRKDIR}/.PLIST.startup; \
    if [ -s ${WRKDIR}/.PLIST.setuid -o -s ${WRKDIR}/.PLIST.startup ]; then \
        echo "===>  SECURITY NOTE: "; \
        if [ -s ${WRKDIR}/.PLIST.setuid ] ; then \
            echo "      This port has installed the following binaries which execute with"; \
            echo "      increased privileges."; \
            ${CAT} ${WRKDIR}/.PLIST.setuid; \
            echo; \
        fi; \
        if [ -s ${WRKDIR}/.PLIST.startup ] ; then \
            echo "      This port has installed the following startup scripts which may cause"; \
            echo "      network services to be started at boot time."; \
            ${SED} s,^,${PREFIX}/, < ${WRKDIR}/.PLIST.startup; \
            echo; \
        fi; \
        echo "      If there are vulnerabilities in these programs there may be a security"; \
        echo "      risk to the system. FreeBSD makes no guarantee about the security of"; \
        echo "      ports included in the Ports Collection. Please type 'make deinstall'"; \
        echo "      to deinstall the port if this is a concern."; \
        if [ ! -z "`make www-site`" ]; then \
            echo; \
            echo "      For more information, and contact details about the security"; \
            echo "      status of this software, see the following webpage: "; \
            ${MAKE} www-site; \
        fi; \
    fi

${PACKAGE_COOKIE}:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} install
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} real-package

# And call the macros

real-fetch: _PORT_USE
real-extract: _PORT_USE
    @${ECHO_MSG} "===>  Extracting for ${PKGNAME}"
real-patch: _PORT_USE
    @${ECHO_MSG} "===>  Patching for ${PKGNAME}"
real-configure: _PORT_USE
    @${ECHO_MSG} "===>  Configuring for ${PKGNAME}"
real-build: _PORT_USE
    @${ECHO_MSG} "===>  Building for ${PKGNAME}"
real-install: _PORT_USE
    @${ECHO_MSG} "===>  Installing for ${PKGNAME}"
real-package: _PORT_USE

# Empty pre-* and post-* targets, note we can't use .if !target()
# in the _PORT_USE macro

.for name in fetch extract patch configure build install package

.if !target(pre-${name})
pre-${name}:
    @${DO_NADA}
.endif

.if !target(post-${name})
post-${name}:
    @${DO_NADA}
.endif

.endfor

.if defined(GNOME_OPTION_MSG) && (!defined(PACKAGE_BUILDING) || !defined(BATCH))
pre-everything:: echo-gnome-option-msg

echo-gnome-option-msg:
    @for m in ${GNOME_OPTION_MSG}; do \
        ${ECHO_MSG} $$m; \
    done
.endif

# Patch-libtool
#
# Special target to automatically make libtool using ports use the
# libtool port.  See above for default values of LIBTOOLFILES.
#
# This target works by first checking the version of the installed
# libtool shell script, which is not actually used.  Rather its path
# is determined, and used to find the path to ltconfig and ltmain.sh
# (which is ../share/libtool/).  Then the configure script is copied
# and the default paths for ltconfig and ltmain.sh (normally ./) is
# replaced.  The port's configure script therefore uses the files
# installed by the libtool port in place of it's own.
#
# Also passed to ltconfig are ${LIBTOOLFLAGS}, which can be used to
# customise the behaviour of the port.  Besides the normal flags the
# freebsd port of libtool supports three special flags:
#  --disable-ltlibs     Don't install the .la files. (on by default)
#  --release-ignore     Ignore any -release flags. (off by default)
#  --release-suffix     Add the -release to all libraries, not just
#                       the shared library. (off by default)
#

.if !target(patch-libtool)
patch-libtool:
    @(if ${LIBTOOL} --version | grep -vq "1\.3\.4-freebsd-ports"; then \
        (${ECHO} "Your libtool installation is out of date. Please remove"; \
         ${ECHO} "and reinstall ${PORTSDIR}/devel/libtool."; \
         exit 1); \
      fi; \
     LIBTOOLDIR=`${WHICH} ${LIBTOOL} | ${SED} -e 's^/bin/libtool^/share/libtool^'` || ${LOCALBASE}/share/libtool; \
     cd ${PATCH_WRKSRC}; \
     for file in ${LIBTOOLFILES}; do \
        ${CP} $$file $$file.tmp; \
        ${SED} -e "s^\$$ac_aux_dir/ltconfig^$${LIBTOOLDIR}/ltconfig^g" \
            -e "s^\$$ac_aux_dir/ltmain.sh^${LIBTOOLFLAGS} $${LIBTOOLDIR}/ltmain.sh^g" \
            $$file.tmp > $$file; \
     done);
.endif

# Checkpatch
#
# Special target to verify patches

.if !target(checkpatch)
checkpatch:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} PATCH_CHECK_ONLY=yes patch
.endif

# Reinstall
#
# Special target to re-run install

.if !target(reinstall)
reinstall:
    @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
    @cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} install
.endif

# Deinstall
#
# Special target to remove installation

.if !target(deinstall)
deinstall:
    @${ECHO_MSG} "===>  Deinstalling for ${PKGNAME}"
    @if ${PKG_INFO} -e ${PKGNAME}; then \
        ${PKG_DELETE} -f ${PKGNAME}; \
     else \
        ${ECHO_MSG} "===>   ${PKGNAME} not installed, skipping"; \
     fi
    @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
.endif

################################################################
# Some more targets supplied for users' convenience
################################################################

# Cleaning up

.if !target(do-clean)
do-clean:
    @if [ -d ${WRKDIR} ]; then \
        if [ -w ${WRKDIR} ]; then \
            ${RM} -rf ${WRKDIR}; \
        else \
            ${ECHO_MSG} "===>   ${WRKDIR} not writable, skipping"; \
        fi; \
    fi
.endif

.if !target(clean)
clean:
.if !defined(NOCLEANDEPENDS)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} clean-depends
.endif
    @${ECHO_MSG} "===>  Cleaning for ${PKGNAME}"
.if target(pre-clean)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pre-clean
.endif
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} do-clean
.if target(post-clean)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} post-clean
.endif
.endif

.if !target(pre-distclean)
pre-distclean:
    @${DO_NADA}
.endif

.if !target(distclean)
distclean: pre-distclean clean
    @cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${DISTFILES} ${PATCHFILES}"
.endif

.if !target(delete-distfiles)
delete-distfiles:
    @${ECHO_MSG} "===>  Deleting distfiles for ${PKGNAME}"
    @(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \
        cd ${_DISTDIR}; \
        for file in ${RESTRICTED_FILES}; do \
            ${RM} -f $${file}; \
            dir=$${file%/*}; \
            if [ "$${dir}" != "$${file}" ]; then \
                ${RMDIR} -p $${dir} >/dev/null 2>&1 || :; \
            fi; \
        done; \
    fi)
.if defined(DIST_SUBDIR)
    -@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE}
.endif
.endif

.if !target(delete-distfiles-list)
delete-distfiles-list:
    @${ECHO} "# ${PKGNAME}"
    @if [ "X${RESTRICTED_FILES}" != "X" ]; then \
        for file in ${RESTRICTED_FILES}; do \
            ${ECHO} "[ -f ${_DISTDIR}/$$file ] && (${ECHO} deleting ${_DISTDIR}/$$file; ${RM} -f ${_DISTDIR}/$$file)"; \
            dir=$${file%/*}; \
            if [ "$${dir}" != "$${file}" ]; then \
                ${ECHO} "(cd ${_DISTDIR} && ${RMDIR} -p $${dir} 2>/dev/null)"; \
            fi; \
        done; \
    fi
.if defined(DIST_SUBDIR)
    @${ECHO} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}"
.endif
.endif

# Prints out a list of files to fetch (useful to do a batch fetch)

.if !target(fetch-list)
fetch-list:
    @${MKDIR} ${_DISTDIR}
    @(cd ${_DISTDIR}; \
     for file in ${DISTFILES}; do \
        if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
            for site in `${SORTED_MASTER_SITES_CMD}`; do \
                DIR=${DIST_SUBDIR}; \
                CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
                case $${file} in \
                */*)    args="-o $${file} $${site}$${file}";; \
                *)      args=$${site}$${file};; \
                esac; \
                ${ECHO} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '||' ; \
                    break; \
            done; \
            ${ECHO} "echo $${file} not fetched" ; \
        fi \
    done)
.if defined(PATCHFILES)
    @(cd ${_DISTDIR}; \
     for file in ${PATCHFILES}; do \
        if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
            for site in `${SORTED_PATCH_SITES_CMD}`; do \
                DIR=${DIST_SUBDIR}; \
                CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
                case $${file} in \
                */*)    args="-o $${file} $${site}$${file}";; \
                *)      args=$${site}$${file};; \
                esac; \
                ${ECHO} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '||' ; \
                    break; \
            done; \
            ${ECHO} "echo $${file} not fetched" ; \
        fi \
     done)
.endif
.endif

# Checksumming utilities

.if !target(makesum)
makesum:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch NO_CHECKSUM=yes
    @if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi
    @(cd ${DISTDIR}; \
     for file in ${_CKSUMFILES}; do \
        ${MD5} $$file >> ${MD5_FILE}; \
     done)
    @for file in ${_IGNOREFILES}; do \
        ${ECHO} "MD5 ($$file) = IGNORE" >> ${MD5_FILE}; \
    done
.endif
# this line goes after the ${MD5} above
#       echo "SIZE ($$file) = "`wc -c < $$file` >> ${MD5_FILE}; \


.if !target(checksum)
checksum:
.if !defined(REAL_EXTRACT)
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch
.endif
    @if [ ! -f ${MD5_FILE} ]; then \
        ${ECHO_MSG} ">> No MD5 checksum file."; \
    else \
        (cd ${DISTDIR}; OK="true"; \
          for file in ${_CKSUMFILES}; do \
            CKSUM=`${MD5} < $$file`; \
            CKSUM2=`${GREP} "^MD5 ($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
            if [ "$$CKSUM2" = "" ]; then \
                ${ECHO_MSG} ">> No checksum recorded for $$file."; \
                OK="false"; \
            elif [ "$$CKSUM2" = "IGNORE" ]; then \
                ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in distinfo file even though"; \
                ${ECHO_MSG} "   the file is not in the "'$$'"{IGNOREFILES} list."; \
                OK="false"; \
            elif ${EXPR} "$$CKSUM2" : ".*$$CKSUM" > /dev/null; then \
                ${ECHO_MSG} ">> Checksum OK for $$file."; \
            else \
                ${ECHO_MSG} ">> Checksum mismatch for $$file."; \
                OK="false"; \
            fi; \
          done; \
          for file in ${_IGNOREFILES}; do \
            CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
            if [ "$$CKSUM2" = "" ]; then \
                ${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
                OK="false"; \
            elif [ "$$CKSUM2" != "IGNORE" ]; then \
                ${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in distinfo file even though"; \
                ${ECHO_MSG} "   the file is in the "'$$'"{IGNOREFILES} list."; \
                OK="false"; \
            fi; \
          done; \
          if [ "$$OK" != "true" ]; then \
            ${ECHO_MSG} "Make sure the Makefile and distinfo file (${MD5_FILE})"; \
            ${ECHO_MSG} "are up to date.  If you are absolutely sure you want to override this"; \
            ${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \
            exit 1; \
          fi) ; \
    fi
.endif

################################################################
# The special package-building targets
# You probably won't need to touch these
################################################################

# Nobody should want to override this unless PKGNAME is simply bogus.

.if !target(package-name)
package-name:
    @${ECHO} ${PKGNAME}
.endif

# Build a package but don't check the package cookie

.if !target(repackage)
repackage: pre-repackage package

pre-repackage:
    @${RM} -f ${PACKAGE_COOKIE}
.endif

# Build a package but don't check the cookie for installation, also don't
# install package cookie

.if !target(package-noinstall)
package-noinstall:
    @${MKDIR} ${WRKDIR}
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
    @${RM} -f ${TMPPLIST}
    -@${RMDIR} ${WRKDIR}
.endif

################################################################
# Dependency checking
################################################################

.if !target(depends)
depends: lib-depends misc-depends
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch-depends
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} build-depends
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} run-depends

.if make(fetch-depends)
DEPENDS_TMP+=   ${FETCH_DEPENDS}
.endif

.if make(build-depends)
DEPENDS_TMP+=   ${BUILD_DEPENDS}
.endif

.if make(run-depends)
DEPENDS_TMP+=   ${RUN_DEPENDS}
.endif

.if defined(ALWAYS_BUILD_DEPENDS)
_DEPEND_ALWAYS= 1
.else
_DEPEND_ALWAYS= 0
.endif

_DEPENDS_USE:   .USE
.if defined(DEPENDS_TMP)
.if !defined(NO_DEPENDS)
    @for i in ${DEPENDS_TMP}; do \
        prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
        dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
        if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
            target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
            dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
        else \
            target="${DEPENDS_TARGET}"; \
            depends_args="${DEPENDS_ARGS}"; \
        fi; \
        if ${EXPR} "$$prog" : \\/ >/dev/null; then \
            if [ -e "$$prog" ]; then \
                ${ECHO_MSG} "===>   ${PKGNAME} depends on file: $$prog - found"; \
                if [ ${_DEPEND_ALWAYS} = 1 ]; then \
                    ${ECHO_MSG} "       (but building it anyway)"; \
                    notfound=1; \
                else \
                    notfound=0; \
                fi; \
            else \
                ${ECHO_MSG} "===>   ${PKGNAME} depends on file: $$prog - not found"; \
                notfound=1; \
            fi; \
        else \
            if ${WHICH} "$$prog" > /dev/null 2>&1 ; then \
                ${ECHO_MSG} "===>   ${PKGNAME} depends on executable: $$prog - found"; \
                if [ ${_DEPEND_ALWAYS} = 1 ]; then \
                    ${ECHO_MSG} "       (but building it anyway)"; \
                    notfound=1; \
                else \
                    notfound=0; \
                fi; \
            else \
                ${ECHO_MSG} "===>   ${PKGNAME} depends on executable: $$prog - not found"; \
                notfound=1; \
            fi; \
        fi; \
        if [ $$notfound != 0 ]; then \
            ${ECHO_MSG} "===>    Verifying $$target for $$prog in $$dir"; \
            if [ ! -d "$$dir" ]; then \
                ${ECHO_MSG} "     >> No directory for $$prog.  Skipping.."; \
            else \
                (cd $$dir; ${MAKE} $$target $$depends_args) ; \
                ${ECHO_MSG} "===>   Returning to build of ${PKGNAME}"; \
            fi; \
        fi; \
    done
.endif
.else
    @${DO_NADA}
.endif

fetch-depends:  _DEPENDS_USE
build-depends:  _DEPENDS_USE
run-depends:    _DEPENDS_USE

lib-depends:
.if defined(LIB_DEPENDS)
.if !defined(NO_DEPENDS)
    @for i in ${LIB_DEPENDS}; do \
        lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
        dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
        if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
            target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
            dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
        else \
            target="${DEPENDS_TARGET}"; \
            depends_args="${DEPENDS_ARGS}"; \
        fi; \
        if ${LDCONFIG} -r | ${GREP} -qwF -e "-l$$lib"; then \
            ${ECHO_MSG} "===>   ${PKGNAME} depends on shared library: $$lib - found"; \
            if [ ${_DEPEND_ALWAYS} = 1 ]; then \
                ${ECHO_MSG} "       (but building it anyway)"; \
                notfound=1; \
            else \
                notfound=0; \
            fi; \
        else \
            ${ECHO_MSG} "===>   ${PKGNAME} depends on shared library: $$lib - not found"; \
            notfound=1; \
        fi; \
        if [ $$notfound != 0 ]; then \
            ${ECHO_MSG} "===>    Verifying $$target for $$lib in $$dir"; \
            if [ ! -d "$$dir" ]; then \
                ${ECHO_MSG} "     >> No directory for $$lib.  Skipping.."; \
            else \
                (cd $$dir; ${MAKE} $$target $$depends_args) ; \
                ${ECHO_MSG} "===>   Returning to build of ${PKGNAME}"; \
                if ${LDCONFIG} -r | ${GREP} -qwF -e "-l$$lib"; then \
                    ${TRUE}; \
                else \
                    ${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \
                    ${FALSE}; \
                fi; \
            fi; \
        fi; \
    done
.endif
.else
    @${DO_NADA}
.endif

misc-depends:
.if defined(DEPENDS)
.if !defined(NO_DEPENDS)
    @for dir in ${DEPENDS}; do \
        if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
            target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
            dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
        else \
            target="${DEPENDS_TARGET}"; \
            depends_args="${DEPENDS_ARGS}"; \
        fi; \
        ${ECHO_MSG} "===>   ${PKGNAME} depends on: $$dir"; \
        ${ECHO_MSG} "===>    Verifying $$target for $$dir"; \
        if [ ! -d $$dir ]; then \
            ${ECHO_MSG} "     >> No directory for $$dir.  Skipping.."; \
        else \
            (cd $$dir; ${MAKE} $$target $$depends_args) ; \
        fi \
    done
    @${ECHO_MSG} "===>   Returning to build of ${PKGNAME}"
.endif
.else
    @${DO_NADA}
.endif

.endif

# Dependency lists: both build and runtime, recursive.  Print out directory names.

all-depends-list:
    @${ALL-DEPENDS-LIST}

ALL-DEPENDS-LIST= \
    checked="${PARENT_CHECKED}"; \
    for dir in $$(${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//') $$(${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//'); do \
        if [ -d $$dir ]; then \
            if (${ECHO} $$checked | ${GREP} -qwv "$$dir"); then \
                child=$$(cd $$dir; ${MAKE} PARENT_CHECKED="$$checked" all-depends-list); \
                for d in $$child; do ${ECHO} $$d; done; \
                ${ECHO} $$dir; \
                checked="$$dir $$child $$checked"; \
            fi; \
        else \
            ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
        fi; \
    done | sort -u

.if !target(clean-depends)
clean-depends:
    @for dir in $$(${ALL-DEPENDS-LIST}); do \
        (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
    done
.endif

.if !target(deinstall-depends)
deinstall-depends:
    @for dir in $$(${ALL-DEPENDS-LIST}); do \
        (cd $$dir; ${MAKE} deinstall); \
    done
.endif

.if !target(fetch-recursive)
fetch-recursive:
    @${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies"
    @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
        (cd $$dir; ${MAKE} fetch); \
    done
.endif

.if !target(fetch-recursive-list)
fetch-recursive-list:
    @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
        (cd $$dir; ${MAKE} fetch-list); \
    done
.endif

.if !target(checksum-recursive)
checksum-recursive:
    @${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies"
    @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
        (cd $$dir; ${MAKE} checksum); \
    done
.endif

# Dependency lists: build and runtime.  Print out directory names.

build-depends-list:
    @${BUILD-DEPENDS-LIST}

BUILD-DEPENDS-LIST= \
    for dir in $$(${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u) $$(${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u); do \
        if [ -d $$dir ]; then \
            ${ECHO} $$dir; \
        else \
            ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
        fi; \
    done | sort -u

run-depends-list:
    @${RUN-DEPENDS-LIST}

RUN-DEPENDS-LIST= \
    for dir in $$(${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u) $$(${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u); do \
        if [ -d $$dir ]; then \
            ${ECHO} $$dir; \
        else \
            ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
        fi; \
    done | sort -u

# Package (recursive runtime) dependency list.  Print out directory names.

package-depends-list:
    @${PACKAGE-DEPENDS-LIST}

PACKAGE-DEPENDS-LIST= \
    checked="${PARENT_CHECKED}"; \
    for dir in $$(${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//') $$(${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//'); do \
        if [ -d $$dir ]; then \
            if (${ECHO} $$checked | ${GREP} -qwv "$$dir"); then \
                child=$$(cd $$dir; ${MAKE} PARENT_CHECKED="$$checked" package-depends-list); \
                for d in $$child; do ${ECHO} $$d; done; \
                ${ECHO} $$dir; \
                checked="$$dir $$child $$checked"; \
            fi; \
        else \
            ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
        fi; \
    done | sort -u

# Print out package names.

package-depends:
    @for dir in $$(${PACKAGE-DEPENDS-LIST}); do \
        (cd $$dir; ${MAKE} package-name); \
    done

################################################################
# Everything after here are internal targets and really
# shouldn't be touched by anybody but the release engineers.
################################################################

# This target generates an index entry suitable for aggregation into
# a large index.  Format is:
#
# distribution-name|port-path|installation-prefix|comment| \
#  description-file|maintainer|categories|build deps|run deps|www site

.if !target(describe)
describe:
    @${ECHO} `perl -e ' \
        print "${PKGNAME}|${.CURDIR}|${PREFIX}|"; \
        if (open (COMMENT, "${COMMENT}")) { \
            $$_ = <COMMENT>; \
            chomp; \
            print; \
        } else { \
            print "** No Description"; \
        } \
        if ( -f "${DESCR}" ) { \
            print "|${DESCR}"; \
        } else { \
            print "|/dev/null"; \
        } \
        print q#|${MAINTAINER}|${CATEGORIES}|#; \
        for (split /\s+/, "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}") { \
            next if /^$$/; \
            s/^[^:]*\://; \
            s/\:.*//; \
            if ( ! -d $$_ ) { \
                print STDERR "${PKGNAME}: \"$$_\" non-existent -- dependency list incomplete"; \
            } else { \
                push @bdirs, $$_; \
            } \
        } \
        for (split /\s+/, "${LIB_DEPENDS} ${RUN_DEPENDS}") { \
            next if /^$$/; \
            s/^[^:]*\://; \
            s/\:.*//; \
            if ( ! -d $$_ ) { \
                print STDERR "${PKGNAME}: \"$$_\" non-existent -- dependency list incomplete"; \
            } else { \
                push @rdirs, $$_; \
            } \
        } \
        for (split /\s+/, "${DEPENDS}") { \
            next if /^$$/; \
            s/\:.*//; \
            if ( ! -d $$_ ) { \
                print STDERR "${PKGNAME}: \"$$_\" non-existent -- dependency list incomplete"; \
            } else { \
                push @mdirs, $$_; \
            } \
        } \
        for (sort (@bdirs, @mdirs)) { \
            if ($$_ ne $$l) { \
                $$a .= $$_ . " "; \
                $$l = $$_; \
            } \
        } \
        chop $$a; \
        print "$$a|"; \
        for (sort (@rdirs, @mdirs)) { \
            if ($$_ ne $$m) { \
                $$b .= $$_ . " "; \
                $$m = $$_; \
            } \
        } \
        chop $$b; \
        print "$$b|"; \
        if (open (DESCR, "${DESCR}")) { \
            until (/^WWW\:\s/ or eof DESCR) { \
                $$_ = <DESCR>; \
            } \
            if (/^WWW\:\s/) { \
                chomp; \
                split /\s+/; \
                print $$_[1]; \
            } \
        } \
        print "\n";'`
.endif

www-site:
.if exists(${DESCR})
    @${GREP} '^WWW:[    ]' ${DESCR} | ${AWK} '{print $$2}' | head -1
.else
    @${ECHO}
.endif

.if !target(readmes)
readmes:    readme
.endif

.if !target(readme)
readme:
    @rm -f ${.CURDIR}/README.html
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.CURDIR}/README.html
.endif

${.CURDIR}/README.html:
    @${ECHO_MSG} "===>   Creating README.html for ${PKGNAME}"
    @${CAT} ${TEMPLATES}/README.port | \
        ${SED} -e 's
%%PORT%%
'`${ECHO} ${.CURDIR} | ${SED} -e 's.*/\([^/]*/[^/]*\)$$\1'`'
g' \
            -e 's
%%PKG%%
${PKGNAME}
g' \
            -e '/%%COMMENT%%/r${COMMENT}' \
            -e '/%%COMMENT%%/d' \
            -e 's
%%DESCR%%
'"`${ECHO} ${DESCR} | ${SED} -e 's${.CURDIR}/'`"'
' \
            -e 's
%%BUILD_DEPENDS%%
'"`cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pretty-print-build-depends-list`"'
' \
            -e 's
%%RUN_DEPENDS%%
'"`cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pretty-print-run-depends-list`"'
' \
            -e 's
%%TOP%%
'"`${ECHO} ${CATEGORIES} | ${SED} -e 'sa .*aa' -e 'sa[^/]*a..ag'`"'/..
' \
        >> $@

# The following two targets require an up-to-date INDEX in ${PORTSDIR}

.if !target(pretty-print-build-depends-list)
pretty-print-build-depends-list:
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
    defined(LIB_DEPENDS) || defined(DEPENDS)
    @${ECHO} -n 'This port requires package(s) "'
    @${ECHO} -n `${GREP} '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$8;}'`
    @${ECHO} '" to build.'
.endif
.endif

.if !target(pretty-print-run-depends-list)
pretty-print-run-depends-list:
.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
    @${ECHO} -n 'This port requires package(s) "'
    @${ECHO} -n `${GREP} '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$9;}'`
    @${ECHO} '" to run.'
.endif
.endif

# Generate packing list.  Also tests to make sure all required package
# files exist.

.if !target(generate-plist)
generate-plist:
    @${ECHO_MSG} "===>   Generating temporary packing list"
    @${MKDIR} `dirname ${TMPPLIST}`
    @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME}."; exit 1; fi
    @>${TMPPLIST}
    @for man in ${__MANPAGES}; do \
        ${ECHO} $${man} >> ${TMPPLIST}; \
    done
.for _PREFIX in ${PREFIX}
.if ${_TMLINKS:M${_PREFIX}*}x != x
    @for i in ${_TMLINKS:M${_PREFIX}*:S,^${_PREFIX}/,,}; do \
        ${ECHO} "$$i" >> ${TMPPLIST}; \
    done
.endif
.if ${_TMLINKS:N${_PREFIX}*}x != x
    @${ECHO} @cwd / >> ${TMPPLIST}
    @for i in ${_TMLINKS:N${_PREFIX}*:S,^/,,}; do \
        ${ECHO} "$$i" >> ${TMPPLIST}; \
    done
    @${ECHO} '@cwd ${PREFIX}' >> ${TMPPLIST}
.endif
.if ${XFREE86_HTML_MAN} == "yes"
.for mansect in 1 2 3 4 5 6 7 8 9 L N
.for man in ${MAN${mansect}}
    @echo lib/X11/doc/html/${man}.html >> ${TMPPLIST}
.endfor
.endfor
.endif
.endfor
    @${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}
.if !defined(NO_MTREE)
    @${ECHO} "@unexec if [ -f %D/info/dir ]; then if sed -e '1,/Menu:/d' %D/info/dir | grep -q '^[*] '; then true; else rm %D/info/dir; fi; fi" >> ${TMPPLIST}
.endif
.if defined(INSTALLS_SHLIB)
    @${ECHO} "@exec ${LDCONFIG} -m ${LDCONFIG_PLIST}" >> ${TMPPLIST}
    @${ECHO} "@unexec ${LDCONFIG} -R" >> ${TMPPLIST}
.endif
.if !defined(NO_FILTER_SHLIBS)
.if (${PORTOBJFORMAT} == "aout")
    @${SED} -e 's,\(/lib.*\.so\.[0-9]*\)$$,\1.0,' ${TMPPLIST} > ${TMPPLIST}.tmp
.else
    @${SED} -e 's,\(/lib.*\.so\.[0-9]*\)\.[0-9]*$$,\1,' ${TMPPLIST} > ${TMPPLIST}.tmp
.endif
    @${MV} -f ${TMPPLIST}.tmp ${TMPPLIST}
.endif
.endif

${TMPPLIST}:
    @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} generate-plist

# Compress (or uncompress) and symlink manpages.
.if !target(compress-man)
compress-man:
.if ${MANCOMPRESSED} == yes && defined(NOMANCOMPRESS)
    @${ECHO_MSG} "===>   Uncompressing manual pages for ${PKGNAME}"
    @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GUNZIP_CMD} $${_manpages} ) || ${TRUE}
.elif ${MANCOMPRESSED} == no && !defined(NOMANCOMPRESS)
    @${ECHO_MSG} "===>   Compressing manual pages for ${PKGNAME}"
    @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GZIP_CMD} $${_manpages} ) || ${TRUE}
.endif
.if defined(_MLINKS)
    @set ${_MLINKS:S,"",,g:S,//,/,g}; \
    while :; do \
        [ $$# -eq 0 ] && break || ${TRUE}; \
        ${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \
        ${LN} -fs `${ECHO} $$1 $$2 | ${AWK} '{ \
                    z=split($$1, a, /\//); x=split($$2, b, /\//); \
                    while (a[i] == b[i]) i++; \
                    for (q=i; q<x; q++) printf "../"; \
                    for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \
        shift; shift; \
    done
.endif
.endif

# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed port is recognized correctly in
# accordance to the @pkgdep directive in the packing lists

.if !target(fake-pkg)
fake-pkg:
    @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
    @${RM} -f /tmp/${PKGNAME}-required-by
.if defined(FORCE_PKG_REGISTER)
    @if [ -e ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY ]; then \
        ${CP} ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY /tmp/${PKGNAME}-required-by; \
    fi
    @${RM} -rf ${PKG_DBDIR}/${PKGNAME}
.endif
    @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
        ${ECHO_MSG} "===>   Registering installation for ${PKGNAME}"; \
        ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
        ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
        ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
        ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
        if [ -f ${PKGINSTALL} ]; then \
            ${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
        fi; \
        if [ -f ${PKGDEINSTALL} ]; then \
            ${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
        fi; \
        if [ -f ${PKGREQ} ]; then \
            ${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
        fi; \
        if [ -f ${PKGMESSAGE} ]; then \
            ${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
        fi; \
        for dep in `cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} package-depends ECHO_MSG=/usr/bin/true | sort -u`; do \
            if [ -d ${PKG_DBDIR}/$$dep -a -z `echo $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \
                if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
                    >/dev/null 2>&1; then \
                    ${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
                fi; \
            fi; \
        done; \
    fi
    @if [ -e /tmp/${PKGNAME}-required-by ]; then \
        ${CAT} /tmp/${PKGNAME}-required-by >> ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY; \
        ${RM} -f /tmp/${PKGNAME}-required-by; \
    fi
.endif

# Depend is generally meaningless for arbitrary ports, but if someone wants
# one they can override this.  This is just to catch people who've gotten into
# the habit of typing `make depend all install' as a matter of course.
#
.if !target(depend)
depend:
.endif

# Same goes for tags
.if !target(tags)
tags:
.endif

.if !defined(NOPRECIOUSMAKEVARS)
.for softvar in CKSUMFILES _MLINKS
.if defined(${softvar})
__softMAKEFLAGS+=      '${softvar}+=${${softvar}:S/'/'\''/g}'
.endif
.endfor
# These won't change, so we can pass them through the environment
.MAKEFLAGS: \
    ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    PORTOBJFORMAT="${PORTOBJFORMAT:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    SYSTEMVERSION="${SYSTEMVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}"
.endif

.endif
# End of post-makefile section.