path: root/Mk/bsd.port.subdir.mk

#-*- mode: makefile; tab-width: 4; -*-
# ex:ts=4
#
#   from: @(#)bsd.subdir.mk 5.9 (Berkeley) 2/1/91
# $FreeBSD$
#
# The include file <bsd.port.subdir.mk> contains the default targets
# for building ports subdirectories.
#
#
# +++ variables +++
#
# STRIP         - The flag passed to the install program to cause the binary
#                 to be stripped.  This is to be used when building your
#                 own install script so that the entire system can be made
#                 stripped/not-stripped using a single knob. [-s]
#
# OPSYS         - Get the operating system type [`uname -s`]
#
# SUBDIR        - A list of subdirectories that should be built as well.
#                 Each of the targets will execute the same target in the
#                 subdirectories.
#
#
# +++ targets +++
#
#   README.html:
#       Creating README.html for package.
#
#   afterinstall, all, beforeinstall, build, checksum, clean,
#   clean-for-cdrom, clean-restricted,
#   clean-for-cdrom-list, clean-restricted-list,
#   configure, deinstall,
#   depend, depends, describe, extract, fetch, fetch-list,
#   ignorelist, ignorelist-verbose,
#   install, maintainer, makesum, package, readmes, realinstall, reinstall,
#   tags
#
#   search:
#       Search for ports using either 'make search key=<keyword>'
#       or 'make search name=<keyword>'.

PORTSDIR?=      /usr/ports
TEMPLATES?=     ${PORTSDIR}/Templates
.if defined(PORTSTOP)
README=         ${TEMPLATES}/README.top
.else
README=         ${TEMPLATES}/README.category
.endif
MOVEDDIR?=      ${PORTSDIR}
MOVEDFILE?=     MOVED

# XXX Are these needed here?  DESCR was set wrong for a few years
MASTERDIR?=     ${.CURDIR}
PKGDIR?=        ${MASTERDIR}
DESCR?=         ${PKGDIR}/pkg-descr

.include "${PORTSDIR}/Mk/bsd.commands.mk"

.MAIN: all

.if !defined(DEBUG_FLAGS)
STRIP?= -s
.endif

# These are variables that are invariant for the lifetime of a recursive port traversal
# (index build, etc), so it is more efficient to precompute them here and pass them in
# to child makes explicitly, instead of recomputing them tens of thousands of times.

.if !defined(NOPRECIOUSMAKEVARS)
.if !defined(ARCH)
ARCH!=  ${UNAME} -p
.endif

.if !defined(OSVERSION)
.if exists(/usr/include/sys/param.h)
OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h
.elif exists(/usr/src/sys/sys/param.h)
OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/src/sys/sys/param.h
.else
OSVERSION!= ${SYSCTL} -n kern.osreldate
.endif
.endif

.if !defined(_OSRELEASE)
_OSRELEASE!=            uname -r
.endif
.if !defined(OSREL)
OSREL=  ${_OSRELEASE:C/[-(].*//}
.endif

.if !defined(OPSYS)
OPSYS!= ${UNAME} -s
.endif

.if ${ARCH} == "amd64" || ${ARCH} =="ia64"
.if !defined(HAVE_COMPAT_IA32_KERN)
HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi
.endif
.endif

.if !defined(CONFIGURE_MAX_CMD_LEN)
CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax
.endif

.if !defined(PYTHON_DEFAULT_VERSION)
PYTHON_DEFAULT_VERSION!=    make -V PYTHON_DEFAULT_VERSION USE_PYTHON=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif

.if !defined(PYTHON_DEFAULT_PORTVERSION)
# We are caching the PYTHON_PORTVERSION of the default python version so we can reuse it in the
# common case.
PYTHON_DEFAULT_PORTVERSION!=    make -V PYTHON_PORTVERSION USE_PYTHON=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif

.if !defined(PYTHONBASE)
PYTHONBASE!=            make -V PYTHONBASE USE_PYTHON=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif

.if !defined(_JAVA_VERSION_LIST_REGEXP)
_JAVA_VERSION_LIST_REGEXP!= make -V _JAVA_VERSION_LIST_REGEXP USE_JAVA=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif

.if !defined(_JAVA_VENDOR_LIST_REGEXP)
_JAVA_VENDOR_LIST_REGEXP!=  make -V _JAVA_VENDOR_LIST_REGEXP USE_JAVA=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif

.if !defined(_JAVA_OS_LIST_REGEXP)
_JAVA_OS_LIST_REGEXP!=      make -V _JAVA_OS_LIST_REGEXP USE_JAVA=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif

.if !defined(_JAVA_PORTS_INSTALLED)
_JAVA_PORTS_INSTALLED!=     make -V _JAVA_PORTS_INSTALLED USE_JAVA=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif

.if !defined(UID)
UID!=   ${ID} -u
.endif

.if exists(${LOCALBASE}/sbin/pkg_info)
PKG_INFO?=  ${LOCALBASE}/sbin/pkg_info
.else
PKG_INFO?=  /usr/sbin/pkg_info
.endif
.if !defined(PKGINSTALLVER)
PKGINSTALLVER!= ${PKG_INFO} -P 2>/dev/null | ${SED} -e 's/.*: //'
.endif

.endif

INDEXDIR?=  ${PORTSDIR}
INDEXFILE?= INDEX-${OSVERSION:C/([0-9]).*/\1/}

# local customization of the ports tree
.if exists(${.CURDIR}/Makefile.local)
.include "${.CURDIR}/Makefile.local"
.endif

TARGETS+=   all
TARGETS+=   build
TARGETS+=   checksum
TARGETS+=   clean
TARGETS+=   clean-for-cdrom
TARGETS+=   clean-for-cdrom-list
TARGETS+=   clean-restricted
TARGETS+=   clean-restricted-list
TARGETS+=   configure
TARGETS+=   deinstall
TARGETS+=   depend
TARGETS+=   depends
TARGETS+=   distclean
TARGETS+=   extract
TARGETS+=   fetch
TARGETS+=   fetch-list
TARGETS+=   ignorelist
TARGETS+=   ignorelist-verbose
TARGETS+=   makesum
TARGETS+=   maintainer
TARGETS+=   package
TARGETS+=   package-recursive
TARGETS+=   realinstall
TARGETS+=   reinstall
TARGETS+=   tags

.for __target in ${TARGETS}
.if !target(${__target})
.if defined(SUBDIR) && !empty(SUBDIR)
${__target}: ${SUBDIR:S/^/_/:S/$/.${__target}/}
.else
${__target}:
.endif
.endif
.endfor

.if defined(SUBDIR) && !empty(SUBDIR)

.for __target in ${TARGETS} checksubdirs describe readmes
${SUBDIR:S/^/_/:S/$/.${__target}/}: _SUBDIRUSE
.endfor

_SUBDIRUSE: .USE
    @OK=""; sub=${.TARGET:S/^_//:R}; \
    for dud in $$DUDS; do \
        if [ $${dud} = $$sub ]; then \
            OK="false"; \
            ${ECHO_MSG} "===> ${DIRPRFX}$$sub skipped"; \
        fi; \
    done; \
    if test -d ${.CURDIR}/$${sub}.${MACHINE_ARCH}; then \
        edir=$${sub}.${MACHINE_ARCH}; \
    elif test -d ${.CURDIR}/$${sub}; then \
        edir=$${sub}; \
    else \
        OK="false"; \
        ${ECHO_MSG} "===> ${DIRPRFX}$${sub} non-existent"; \
    fi; \
    if [ "$$OK" = "" ]; then \
        ${ECHO_MSG} "===> ${DIRPRFX}$${edir}"; \
        cd ${.CURDIR}/$${edir}; \
        ${MAKE} -B ${.TARGET:E:realinstall=install} \
            DIRPRFX=${DIRPRFX}$$edir/; \
    fi

.for _subdir in ${SUBDIR:S/^/_/}
${_subdir}::   ${_subdir:S/$/.all/}
.endfor

.endif

.if !target(install)
.if !target(beforeinstall)
beforeinstall:
.endif
.if !target(afterinstall)
afterinstall:
.endif
install: afterinstall
afterinstall: realinstall
realinstall: beforeinstall ${SUBDIR:S/^/_/:S/$/.realinstall/}
.endif

IGNOREDIR=  CVS Mk Templates Tools distfiles packages pkg

.if !target(checksubdirs)
.if defined(PORTSTOP)
checksubdirs: checksubdir ${SUBDIR:S/^/_/:S/$/.checksubdirs/}
.else
checksubdirs: checksubdir
.endif
.endif

.if !target(checksubdir)
checksubdir:
    @for d in *; do \
      if [ -d "$$d" ]; then \
        found=0; \
        for s in ${SUBDIR} ${IGNOREDIR}; do \
          if [ "x$$s" = "x$$d" ]; then \
            found=1; \
            break; \
          fi; \
        done; \
        if [ $$found = 0 ]; then \
          ${ECHO_MSG} "Warning: directory $$d not in SUBDIR"; \
        fi; \
      fi; \
    done
    @for s in ${SUBDIR}; do \
      if ! [ -d ${.CURDIR}/$$s ]; then \
        ${ECHO_MSG} "Warning: directory $$s in SUBDIR does not exist"; \
      fi \
    done
.endif

.if !target(describe)
.if defined(PORTSTOP)
# This is a bit convoluted to deal with the fact that make will overlap I/O from child make processes
# if they write more than 2k: this will corrupt the INDEX file.  make -P does not do this, but it adds
# extraneous output and redirects stderr, so we lose error reporting from child makes.  Instead we have
# to roll our own implementation of make -P and make sure that each child make writes to their own file,
# which we will combine at the end.  This gives substantial performance benefits over doing a make -j1

.if defined(BUILDING_INDEX)
describe: ${SUBDIR:S/^/describe./}

.for i in ${SUBDIR}
describe.$i:
    @cd ${.CURDIR}; ${MAKE} -B ${i:S/^/_/:S/$/.describe/} > ${INDEX_TMPDIR}/${INDEXFILE}.desc.${i}
.endfor
.else
describe: ${SUBDIR:S/^/_/:S/$/.describe/}
.endif
.else
describe:
    @for sub in ${SUBDIR}; do \
    if ${TEST} -d ${.CURDIR}/$${sub}; then \
        ${ECHO_MSG} "===> ${DIRPRFX}$${sub}"; \
        cd ${.CURDIR}/$${sub}; \
        ${MAKE} -B describe || \
            (${ECHO_CMD} "===> ${DIRPRFX}$${sub} failed" >&2; \
            exit 1) ;\
    else \
        ${ECHO_MSG} "===> ${DIRPRFX}$${sub} non-existent"; \
    fi; \
    done
.endif
.endif

.if !target(readmes)
.if defined(PORTSTOP)
readmes: readme ${SUBDIR:S/^/_/:S/$/.readmes/}
    @${ECHO_MSG} "===>   Creating README.html for all ports"
    @perl ${PORTSDIR}/Tools/make_readmes < ${INDEXDIR}/${INDEXFILE}
.else
readmes: readme
.endif
.endif

.if !target(readme)
readme:
    @${RM} -f README.html
    @${MAKE} README.html
.endif

HTMLIFY=    ${SED} -e 's/&/\&amp;/g' -e 's/>/\&gt;/g' -e 's/</\&lt;/g'

package-name:
    @${ECHO_CMD} ${.CURDIR} | ${SED} -e 's^.*/^^'

README.html:
    @${ECHO_CMD} "===>  Creating README.html"
    @> $@.tmp
.for entry in ${SUBDIR}
.if exists(${entry})
.if defined(PORTSTOP)
    @${ECHO_CMD} -n '<a href="'${entry}/README.html'">'"`${ECHO_CMD} ${entry} | ${HTMLIFY}`"'</a>: ' >> $@.tmp
.else
    @${ECHO_CMD} -n '<a href="'${entry}/README.html'">'"`cd ${entry}; ${MAKE} package-name | ${HTMLIFY}`</a>: " >> $@.tmp
.endif
    @${ECHO_CMD} `cd ${entry}; ${MAKE} -V COMMENT` | ${HTMLIFY} >> $@.tmp
.endif
.endfor
    @${SORT} -t '>' +1 -2 $@.tmp > $@.tmp2
.if exists(${DESCR})
    @${HTMLIFY} ${DESCR} > $@.tmp3
.else
    @> $@.tmp3
.endif
.if defined(COMMENT)
    @${ECHO_CMD} "${COMMENT}" | ${HTMLIFY} > $@.tmp4
.else
    @> $@.tmp4
.endif
    @${CAT} ${README} | \
        ${SED} -e 's/%%CATEGORY%%/'"`basename ${.CURDIR}`"'/g' \
            -e '/%%COMMENT%%/r$@.tmp4' \
            -e '/%%COMMENT%%/d' \
            -e '/%%DESCR%%/r$@.tmp3' \
            -e '/%%DESCR%%/d' \
            -e '/%%SUBDIR%%/r$@.tmp2' \
            -e '/%%SUBDIR%%/d' \
        > $@
    @${RM} -f $@.tmp $@.tmp2 $@.tmp3 $@.tmp4

# Pass in the cached invariant variables to child makes.
# XXX Why are we trying to escape these characters using regexps and not using ':Q'?
.if !defined(NOPRECIOUSMAKEVARS)
.MAKEFLAGS: \
    ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    UID="${UID:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    PKGINSTALLVER="${PKGINSTALLVER:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
    HAVE_COMPAT_IA32_KERN="${HAVE_COMPAT_IA32_KERN}" \
    CONFIGURE_MAX_CMD_LEN="${CONFIGURE_MAX_CMD_LEN}" \
    PYTHON_DEFAULT_VERSION="${PYTHON_DEFAULT_VERSION}" \
    PYTHON_DEFAULT_PORTVERSION="${PYTHON_DEFAULT_PORTVERSION}" \
    PYTHONBASE="${PYTHONBASE}" \
    _JAVA_VERSION_LIST_REGEXP="${_JAVA_VERSION_LIST_REGEXP}" \
    _JAVA_VENDOR_LIST_REGEXP="${_JAVA_VENDOR_LIST_REGEXP}" \
    _JAVA_OS_LIST_REGEXP="${_JAVA_OS_LIST_REGEXP}" \
    _JAVA_PORTS_INSTALLED="${_JAVA_PORTS_INSTALLED}"
.endif

PORTSEARCH_DISPLAY_FIELDS?=name,path,info,maint,index,bdeps,rdeps,www
PORTSEARCH_KEYLIM?=0
PORTSEARCH_XKEYLIM?=0
PORTSEARCH_IGNORECASE?=1
PORTSEARCH_MOVED?=1

_PORTSEARCH=    \
    here=${.CURDIR}; \
    if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \
        ${ECHO_MSG} "The ${.TARGET} target requires ${INDEXFILE}. Please run make index or make fetchindex."; \
    else \
    cd ${PORTSDIR}; \
    if [ -z "$$key"   -a -z "$$xkey"   -a \
         -z "$$name"  -a -z "$$xname"  -a \
         -z "$$path"  -a -z "$$xpath"  -a \
         -z "$$info"  -a -z "$$xinfo"  -a \
         -z "$$maint" -a -z "$$xmaint" -a \
         -z "$$cat"   -a -z "$$xcat"   -a \
         -z "$$bdeps" -a -z "$$xbdeps" -a \
         -z "$$rdeps" -a -z "$$xrdeps" -a \
         -z "$$www"   -a -z "$$xwww"   ]; \
    then \
      ${ECHO_MSG} "The ${.TARGET} target requires a keyword parameter or name parameter,"; \
      ${ECHO_MSG} "e.g.: \"make ${.TARGET} key=somekeyword\""; \
      ${ECHO_MSG} "or    \"make ${.TARGET} name=somekeyword\""; \
      exit; \
    fi; \
    ${AWK} -F\| -v there="$$here/" -v top="$$(pwd -P)" \
        -v key="$$key"          -v xkey="$$xkey" \
        -v name="$$name"        -v xname="$$xname" \
        -v path="$$path"        -v xpath="$$xpath" \
        -v info="$$info"        -v xinfo="$$xinfo" \
        -v maint="$$maint"      -v xmaint="$$xmaint" \
        -v cat="$$cat"          -v xcat="$$xcat" \
        -v bdeps="$$bdeps"      -v xbdeps="$$xbdeps" \
        -v rdeps="$$rdeps"      -v xrdeps="$$xrdeps" \
        -v www="$$www"          -v xwww="$$xwww" \
        -v icase="$${icase:-${PORTSEARCH_IGNORECASE}}" \
        -v keylim="$${keylim:-${PORTSEARCH_KEYLIM}}" \
        -v xkeylim="$${xkeylim:-${PORTSEARCH_XKEYLIM}}" \
        -v display="$${display:-${PORTSEARCH_DISPLAY_FIELDS}}" \
        -v xdisplay="$$xdisplay" \
    'BEGIN { \
            gsub(/\+/,"\\+",name); \
        if (substr(there, 1, length(top)) == top) \
          there = "${PORTSDIR}" substr(there, 1 + length(top)); \
        therelen = length(there); \
        keylen = length(key); keylim = keylim && keylen; \
        if (!keylim && keylen) \
          parms[0] = (icase ? tolower(key) : key); \
        xkeylen = length(xkey); xkeylim = xkeylim && xkeylen; \
        if (!xkeylim && xkeylen) \
          xparms[0] = (icase ? tolower(xkey) : xkey); \
        if (icase) { \
        if (length(name))  parms[1]  = tolower(name);  if (length(xname))  xparms[1]  = tolower(xname); \
        if (length(path))  parms[2]  = tolower(path);  if (length(xpath))  xparms[2]  = tolower(xpath); \
        if (length(info))  parms[4]  = tolower(info);  if (length(xinfo))  xparms[4]  = tolower(xinfo); \
        if (length(maint)) parms[6]  = tolower(maint); if (length(xmaint)) xparms[6]  = tolower(xmaint); \
        if (length(cat))   parms[7]  = tolower(cat);   if (length(xcat))   xparms[7]  = tolower(xcat); \
        if (length(bdeps)) parms[8]  = tolower(bdeps); if (length(xbdeps)) xparms[8]  = tolower(xbdeps); \
        if (length(rdeps)) parms[9]  = tolower(rdeps); if (length(xrdeps)) xparms[9]  = tolower(xrdeps); \
        if (length(www))   parms[10] = tolower(www);   if (length(xwww))   xparms[10] = tolower(xwww); \
      } else { \
        if (length(name))  parms[1]  = name;  if (length(xname))  xparms[1]  = xname; \
        if (length(path))  parms[2]  = path;  if (length(xpath))  xparms[2]  = xpath; \
        if (length(info))  parms[4]  = info;  if (length(xinfo))  xparms[4]  = xinfo; \
        if (length(maint)) parms[6]  = maint; if (length(xmaint)) xparms[6]  = xmaint; \
        if (length(cat))   parms[7]  = cat;   if (length(xcat))   xparms[7]  = xcat; \
        if (length(bdeps)) parms[8]  = bdeps; if (length(xbdeps)) xparms[8]  = xbdeps; \
        if (length(rdeps)) parms[9]  = rdeps; if (length(xrdeps)) xparms[9]  = xrdeps; \
        if (length(www))   parms[10] = www;   if (length(xwww))   xparms[10] = xwww; \
      } \
        fields["name"]  = 1;  names[1]  = "Port"; \
        fields["path"]  = 2;  names[2]  = "Path"; \
        fields["info"]  = 4;  names[4]  = "Info"; \
        fields["maint"] = 6;  names[6]  = "Maint"; \
        fields["cat"]   = 7;  names[7]  = "Index"; \
        fields["bdeps"] = 8;  names[8]  = "B-deps"; \
        fields["rdeps"] = 9;  names[9]  = "R-deps"; \
        fields["www"]   = 10; names[10] = "WWW"; \
        split(display, d, /,[ \t]*/); \
        split(xdisplay, xd, /,[ \t]*/); \
        for (i in d) { \
            toprint = 1; \
          for (j in xd) { \
                if (d[i] == xd[j] ) { \
                       toprint=0; \
                       break; \
                 }\
          } \
        if (toprint == 1 ) disp[fields[d[i]]] = 1; \
        } \
      } \
      { \
        if (match($$2, "^/usr/ports/[^/]*/[^/]*$$") > 0) \
          sub("^/usr/ports", "${PORTSDIR}", $$2); \
        if (substr($$2, 1, therelen) != there) \
          next; \
        for (i in parms) \
          if ((icase ? tolower($$i) : $$i) !~ parms[i]) \
            next; \
        for (i in xparms) \
          if ((icase ? tolower($$i) : $$i) ~ xparms[i]) \
            next; \
        found = 0; \
        for (i = 1; i < 11; i++) \
          if (i in disp) { \
            if (xkeylim && (icase ? tolower($$i) : $$i) ~ xkey) \
              next; \
            if (!found && keylim && (icase ? tolower($$i) : $$i) ~ key) \
              found = 1; \
          } \
        if (keylim && !found) \
          next; \
        for (i = 1; i < 11; i++) \
          if (i in disp) \
            printf("%s:\t%s\n", names[i], $$i); \
        print(""); \
      }' ${INDEXDIR}/${INDEXFILE}; \
      if [ "$$name" -o "$$xname" ] && [ ${PORTSEARCH_MOVED} -gt 0 ]; \
      then \
        ${AWK} -F\| -v name="$$name"        -v xname="$$xname" \
            -v icase="$${icase:-${PORTSEARCH_IGNORECASE}}" \
        'BEGIN { \
            if (icase) { \
            if (length(name))  name = tolower(name);  if (length(xname))  xname = tolower(xname); \
            } \
            fields["name"]  = 1;  names[1]  = "Port"; \
            fields["destination"]  = 2;  names[2]  = "Moved"; \
            fields["date"]  = 3;  names[3]  = "Date"; \
            fileds["reason"] = 4;  names[4] = "Reason"; \
         } \
        { \
        oldname = $$1;  newname = $$2; \
        if (oldname ~ /^\#/) next; \
        sub(".*\/", "", oldname);  newname = sub(".*\/", "", newname); \
            if (((icase ? tolower(oldname) : oldname) ~ name) || \
          ((icase ? tolower(newname) : newname) ~ name)) { \
                for (i = 1; i <= 4; i++) { \
                printf("%s:\t%s\n", names[i], $$i); \
                } \
            print(""); \
            } \
        }' ${MOVEDDIR}/${MOVEDFILE}; \
      fi \
    fi 

search:
    @${_PORTSEARCH}

quicksearch:
    @export display="name,path,info" ; \
    ${_PORTSEARCH}