path: root/www/squid31/Makefile

# New ports collection makefile for:    squid24
# Date created:     Tue Mar 27 14:56:08 CEST 2001
# Whom:         Adrian Chadd <adrian@FreeBSD.org>
#
# $FreeBSD$
#
# Tunables not (yet) configurable via 'make config':
# SQUID_{U,G}ID
#   Which user/group Squid should run as (default: squid/squid).
#   The user and group will be created if they do not already exist using
#   a uid:gid of 100:100.
#   NOTE: older versions of Squid defaulted to nobody/nogroup.
#   If you wish to run Squid as "nobody" (which is not recommended), please
#   define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment
#   before you start the update or installation of this port.
#
# SQUID_LANGUAGES
#   A list of languages for which error page files should be installed
#   (default: all available)
#
#   E.g. use `make SQUID_LANGUAGES="English French"' if you want to
#   install the files for these languages only.
#   Use `make -VSQUID_LANGUAGES' or scroll down to this variable's
#   definition to see which values are valid.
#
# SQUID_DEFAULT_LANG
#   If you define SQUID_LANGUAGES, select which language should be the default
#   one (this variable defaults to "templates"). This setting can be overwritten
#   with squid.conf's error_directory directive.
#
# SQUID_CONFIGURE_ARGS
#   Additional configuration options.
#
#   To enable them, use e.g
#   `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install'
#
#   The list below may be incomplete, please see the configure script
#   in the Squid source distribution for the complete list of additional
#   options.
#   Note that you probably do not need to worry about these options in most
#   cases, they are included in case you want to experiment with them.
#
#    --enable-xmalloc-statistics
#     Show malloc statistics in status page
#    --enable-cachemgr-hostname=some.hostname
#     Make cachemgr.cgi default to this host
#    --disable-unlinkd
#     Do not use "unlinkd"
#    --with-aufs-threads=N_THREADS
#     Tune the number of worker threads for the aufs object
#    --with-filedescriptors=N
#     Force Squid to use N filedescriptors.
#    --enable-ntlm-fail-open
#     Enable NTLM fail open, where a helper that fails one of the
#     Authentication steps can allow Squid to still authenticate the user
#    --enable-x-accelerator-vary
#     Enable support for the X-Accelerator-Vary HTTP header. Can be used
#     to indicate variance within an accelerator setup. Typically used
#     together with other code that adds custom HTTP headers to the
#     requests.

PORTNAME=   squid
PORTVERSION=    3.0.${SQUID_STABLE_VER}
PORTREVISION=   1
CATEGORIES= www
MASTER_SITES=   ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
        ftp://mirrors.24-7-solutions.net/pub/squid/%SUBDIR%/ \
        ftp://ftp.belnet.be/packages/squid/pub/%SUBDIR%/ \
        ftp://ftp.nl.uu.net/pub/unix/www/squid/%SUBDIR%/ \
        ftp://ftp.mirrorservice.org/sites/ftp.squid-cache.org/pub/%SUBDIR%/ \
        ftp://ftp.ntua.gr/pub/www/Squid/%SUBDIR%/ \
        ftp://ftp.ccs.neu.edu/pub/mirrors/squid.nlanr.net/pub/%SUBDIR%/ \
        ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid/&,} \
        http://www.squid-cache.org/Versions/v3/3.0/ \
        http://www3.us.squid-cache.org/Versions/v3/3.0/ \
        http://www1.at.squid-cache.org/Versions/v3/3.0/ \
        http://www2.nl.squid-cache.org/Versions/v3/3.0/ \
        http://www1.ru.squid-cache.org/Versions/v3/3.0/ \
        http://www1.uk.squid-cache.org/Versions/v3/3.0/ \
        http://www1.jp.squid-cache.org/Versions/v3/3.0/ \
        http://www2.tw.squid-cache.org/Versions/v3/3.0/
MASTER_SITE_SUBDIR= squid-3/STABLE
DISTNAME=   squid-3.0.STABLE${SQUID_STABLE_VER}
DIST_SUBDIR=    squid3.0

PATCH_SITES=    http://www.squid-cache.org/%SUBDIR%/ \
        http://www2.us.squid-cache.org/%SUBDIR%/ \
        http://www3.us.squid-cache.org/%SUBDIR%/ \
        http://www1.at.squid-cache.org/%SUBDIR%/ \
        http://www2.nl.squid-cache.org/%SUBDIR%/ \
        http://www1.ru.squid-cache.org/%SUBDIR%/ \
        http://www1.uk.squid-cache.org/%SUBDIR%/ \
        http://www1.jp.squid-cache.org/%SUBDIR%/ \
        http://www1.tw.squid-cache.org/%SUBDIR%/
PATCH_SITE_SUBDIR=  Versions/v3/3.0/changesets
PATCHFILES=

MAINTAINER= tmseck@web.de
COMMENT=    HTTP Caching Proxy

LATEST_LINK=    squid30

SQUID_STABLE_VER=   13

CONFLICTS=  squid-2.[0-9].* cacheboy-[0-9]*
GNU_CONFIGURE=  yes
USE_BZIP2=  yes
USE_PERL5=  yes
USE_RC_SUBR=    squid

SQUID_UID?= squid
SQUID_GID?= squid

MAN8=       cachemgr.cgi.8 squid.8 squid_radius_auth.8
docs=       QUICKSTART README RELEASENOTES.html doc/debug-sections.txt
PORTDOCS=   ${docs:T}
PORTEXAMPLES=   *
SUB_FILES+= pkg-deinstall pkg-install pkg-message
SUB_LIST+=  SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID}

OPTIONS=    SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
        SQUID_SASL_AUTH "Install SASL authentication helpers" off \
        SQUID_DELAY_POOLS "Enable delay pools" off \
        SQUID_SNMP "Enable SNMP support" on \
        SQUID_CARP "Enable CARP support" on \
        SQUID_SSL "Enable SSL support for reverse proxies" off \
        SQUID_PINGER "Install the icmp helper" off \
        SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \
        SQUID_HTCP "Enable HTCP support" off \
        SQUID_VIA_DB "Enable forward/via database" off \
        SQUID_CACHE_DIGESTS "Enable cache digests" off \
        SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \
        SQUID_WCCPV2 "Enable Web Cache Coordination Prot. v2" off \
        SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \
        SQUID_IDENT "Enable ident (RFC 931) lookups" on \
        SQUID_REFERER_LOG "Enable Referer-header logging" off \
        SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \
        SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
        SQUID_IPFW "Enable transparent proxying with IPFW" off \
        SQUID_PF "Enable transparent proxying with PF" off \
        SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \
        SQUID_ICAP "Enable ICAP client functionality" off \
        SQUID_ESI "Enable ESI support (experimental)" off \
        SQUID_AUFS "Enable the aufs storage scheme" off \
        SQUID_COSS "Enable COSS (currently not available)" off \
        SQUID_KQUEUE "Use kqueue(2) (experimental)" on \
        SQUID_LARGEFILE "Support log and cache files >2GB" off \
        SQUID_STACKTRACES "Create backtraces on fatal errors" off \
        SQUID_DEBUG "Enable debugging options" off

etc_files=  squid/cachemgr.conf.default \
        squid/mib.txt squid/mime.conf.default \
        squid/msntauth.conf.default squid/squid.conf.default

icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \
        anthony-box2.gif anthony-c.gif anthony-compressed.gif \
        anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \
        anthony-f.gif anthony-image.gif anthony-image2.gif \
        anthony-layout.gif anthony-link.gif anthony-movie.gif \
        anthony-pdf.gif anthony-portal.gif anthony-ps.gif \
        anthony-quill.gif anthony-script.gif anthony-sound.gif \
        anthony-tar.gif anthony-tex.gif anthony-text.gif \
        anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif

error_files=    ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \
        ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \
        ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_ESI ERR_FORWARDING_DENIED \
        ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \
        ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \
        ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \
        ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \
        ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \
        ERR_ONLY_IF_CACHED_MISS ERR_READ_ERROR ERR_READ_TIMEOUT \
        ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \
        ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT

libexec=    cachemgr.cgi digest_pw_auth diskd ip_user_check \
        msnt_auth ncsa_auth ntlm_auth pam_auth smb_auth \
        smb_auth.sh squid_db_auth squid_radius_auth squid_session \
        squid_unix_group wbinfo_group.pl
.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == ""
libexec+=   unlinkd
.endif

sbin=       RunAccel RunCache squidclient squid

CONFIGURE_ARGS= --with-default-user=${SQUID_UID} \
        --bindir=${PREFIX}/sbin  \
        --sbindir=${PREFIX}/sbin  \
        --datadir=${PREFIX}/etc/squid \
        --libexecdir=${PREFIX}/libexec/squid \
        --localstatedir=${PREFIX}/squid \
        --sysconfdir=${PREFIX}/etc/squid \
        --enable-removal-policies="lru heap" \
        --disable-linux-netfilter \
        --disable-linux-tproxy \
        --disable-epoll

.include <bsd.port.pre.mk>

# Authentication methods and modules:

basic_auth= DB NCSA PAM MSNT SMB squid_radius_auth
digest_auth=    password
external_acl=   ip_user session unix_group wbinfo_group
MAN8+=      ncsa_auth.8 pam_auth.8 squid_db_auth.8 squid_session.8 \
        squid_unix_group.8
.if defined(WITH_SQUID_LDAP_AUTH)
USE_OPENLDAP=   yes
CFLAGS+=    -I${LOCALBASE}/include
LDFLAGS+=   -L${LOCALBASE}/lib
MAN8+=      squid_ldap_auth.8 squid_ldap_group.8
basic_auth+=    LDAP
digest_auth+=   ldap
external_acl+=  ldap_group
libexec+=   digest_ldap_auth squid_ldap_auth squid_ldap_group
.endif
.if defined(WITH_SQUID_SASL_AUTH)
LIB_DEPENDS+=   sasl2.2:${PORTSDIR}/security/cyrus-sasl2
CFLAGS+=    -I${LOCALBASE}/include
CPPFLAGS+=  -I${LOCALBASE}/include
LDFLAGS+=   -L${LOCALBASE}/lib
basic_auth+=    SASL
libexec+=   sasl_auth
.endif
.if !defined(NO_NIS) && !defined(WITHOUT_NIS)
basic_auth+=    YP
libexec+=   yp_auth
.endif
CONFIGURE_ARGS+=    --enable-auth="basic digest negotiate ntlm" \
            --enable-basic-auth-helpers="${basic_auth}" \
            --enable-digest-auth-helpers="${digest_auth}" \
            --enable-external-acl-helpers="${external_acl}" \
            --enable-ntlm-auth-helpers="SMB"
.if !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS)
# XXX This currently only works with heimdal from the base system,
#     see files/patch-squid_kerb_auth:
CONFIGURE_ARGS+=    --enable-negotiate-auth-helpers="squid_kerb_auth"
libexec+=   squid_kerb_auth
.endif

# Storage schemes:

storage_schemes=    ufs diskd null
.if defined(WITH_SQUID_AUFS)
storage_schemes+=   aufs
# Only document switching from libpthread to libthr using libmap.conf
# where lipthread is the default threading library:
.if ${OSVERSION} < 700041
EXTRA_PATCHES+=     ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs
.endif
# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
CONFIGURE_ARGS+=    --with-pthreads
CFLAGS+=    ${PTHREAD_CFLAGS}
.endif
.if defined(WITH_SQUID_COSS)
# Starting with 3.0.STABLE9, COSS is disabled in Squid-3 until fixes
# from the 2.x series are backported to 3.x.
# storage_schemes+= coss
.endif
CONFIGURE_ARGS+=    --enable-storeio="${storage_schemes}"

# Other options set via 'make config':

.if defined(WITH_SQUID_DELAY_POOLS)
CONFIGURE_ARGS+=    --enable-delay-pools
.endif
.if defined(WITHOUT_SQUID_SNMP)
CONFIGURE_ARGS+=    --disable-snmp
.endif
.if defined(WITHOUT_SQUID_CARP)
CONFIGURE_ARGS+=    --disable-carp
.endif
.if defined(WITH_SQUID_SSL)
# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only
# works when it is defined before bsd.port{.pre}.mk is .included.
# This makes it currently impossible to combine this macro with OPTIONS to
# conditionally include OpenSSL support.
.include "${PORTSDIR}/Mk/bsd.openssl.mk"
CONFIGURE_ARGS+=    --enable-ssl \
            --with-openssl="${OPENSSLBASE}"
CFLAGS+=    -I${OPENSSLINC}
LDFLAGS+=   -L${OPENSSLLIB}
.endif
.if defined(WITH_SQUID_PINGER)
CONFIGURE_ARGS+=    --enable-icmp
libexec+=   pinger
.endif
.if defined(WITH_SQUID_DNS_HELPER)
CONFIGURE_ARGS+=    --disable-internal-dns
libexec+=   dnsserver
.endif
.if defined(WITH_SQUID_HTCP)
CONFIGURE_ARGS+=    --enable-htcp
.endif
.if defined(WITH_SQUID_VIA_DB)
CONFIGURE_ARGS+=    --enable-forw-via-db
.endif
.if defined(WITH_SQUID_CACHE_DIGESTS)
CONFIGURE_ARGS+=    --enable-cache-digests
.endif
.if defined(WITHOUT_SQUID_WCCP)
CONFIGURE_ARGS+=    --disable-wccp
.endif
.if defined(WITH_SQUID_WCCPV2)
CONFIGURE_ARGS+=    --enable-wccpv2
.endif
.if defined(WITH_SQUID_STRICT_HTTP)
CONFIGURE_ARGS+=    --disable-http-violations
.endif
.if defined(WITHOUT_SQUID_IDENT)
CONFIGURE_ARGS+=    --disable-ident-lookups
.endif
.if defined(WITH_SQUID_REFERER_LOG)
CONFIGURE_ARGS+=    --enable-referer-log
.endif
.if defined(WITH_SQUID_USERAGENT_LOG)
CONFIGURE_ARGS+=    --enable-useragent-log
.endif
.if defined(WITH_SQUID_ARP_ACL)
CONFIGURE_ARGS+=    --enable-arp-acl
.endif
.if defined(WITH_SQUID_IPFW)
CONFIGURE_ARGS+=    --enable-ipfw-transparent
.endif
.if defined(WITH_SQUID_PF)
CONFIGURE_ARGS+=    --enable-pf-transparent
.endif
.if defined(WITH_SQUID_IPFILTER)
CONFIGURE_ARGS+=    --enable-ipf-transparent
.endif
.if defined(WITH_SQUID_ICAP)
CONFIGURE_ARGS+=    --enable-icap-client
.endif
.if defined(WITH_SQUID_ESI)
CONFIGURE_ARGS+=    --enable-esi
LIB_DEPENDS+=   expat:${PORTSDIR}/textproc/expat2 \
        xml2:${PORTSDIR}/textproc/libxml2
CFLAGS+=    -I${LOCALBASE}/include -I${LOCALBASE}/include/libxml2
LDFLAGS+=   -L${LOCALBASE}/lib
.endif
.if defined(WITHOUT_SQUID_KQUEUE)
# Squid-3's kqueue support is still marked as experimental, so it is not yet
# enabled automatically as in Squid-2. We are explicit about disabling it,
# nonetheless:
CONFIGURE_ARGS+=    --disable-kqueue
.else
CONFIGURE_ARGS+=    --enable-kqueue
.endif
.if defined(WITH_SQUID_LARGEFILE)
CONFIGURE_ARGS+=    --with-large-files
.endif
.if defined(WITH_SQUID_STACKTRACES)
CONFIGURE_ARGS+=    --enable-stacktraces
CFLAGS+=        -g
STRIP=
.endif
.if defined(WITH_SQUID_DEBUG) || defined(WITH_DEBUG)
# TODO: are there other useful options that can/should be set to help
#       the developers in debugging failures?
CONFIGURE_ARGS+=    --disable-optimizations
WITH_DEBUG?=        yes
.endif
# Languages:
#
# If you do not define SQUID_LANGUAGES yourself, all available language files
# will be installed; the default language will be English.
SQUID_LANGUAGES?=   Armenian Azerbaijani Bulgarian Catalan Czech Danish \
            Dutch English Estonian Finnish French German Greek \
            Hebrew Hungarian Italian Japanese Korean Lithuanian \
            Polish Portuguese Romanian Russian-1251 Russian-koi8-r \
            Serbian Simplify_Chinese Slovak Spanish Swedish \
            Traditional_Chinese Turkish Ukrainian-1251 \
            Ukrainian-koi8-u Ukrainian-utf8
SQUID_DEFAULT_LANG?=    templates
CONFIGURE_ARGS+=    --enable-err-languages="${SQUID_LANGUAGES}" \
            --enable-default-err-language=${SQUID_DEFAULT_LANG}

# Finally, add additional user specified configuration options:
CONFIGURE_ARGS+=    ${SQUID_CONFIGURE_ARGS}

CONFIGURE_ENV+=     CFLAGS="${CFLAGS}" \
            CPPFLAGS="${CPPFLAGS}"\
            LDFLAGS="${LDFLAGS}"

PLIST_DIRS= etc/squid/icons libexec/squid
PLIST_FILES=    ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \
        ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,}

.for d in ${SQUID_LANGUAGES} templates
PLIST_DIRS+=    etc/squid/errors/${d}
PLIST_FILES+=   ${error_files:S,^,etc/squid/errors/${d}/,}
.endfor
PLIST_DIRS+=    etc/squid/errors etc/squid squid/logs squid/cache squid

post-patch:
    @${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \
        ${WRKSRC}/src/cf.data.pre
    @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
        ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \
        ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh

pre-install:
# Prevent installation of .orig files by deleting them.
    @${FIND} ${WRKSRC} -name '*.bak' -delete
    @${FIND} ${WRKSRC} -name '*.orig' -delete
# XXX:
# Remove error pages that were prematurely integrated into 3.0.STABLE.
# This is done to keep the package list manageable by installing the same
# set of error files for every language:
    @for d in Ukrainian-1251 Ukrainian-koi8-u Ukrainian-utf8 templates; \
        do ${RM} -f ${WRKSRC}/errors/$${d}/ERR_SECURE_CONNECT_FAIL; \
     done

pre-su-install:
    @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \
        ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL

post-install:
.if !defined(NOPORTEXAMPLES)
    @${MKDIR} ${EXAMPLESDIR}
    ${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR}
.endif
.if defined(WITH_SQUID_PINGER)
    ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \
    ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger
.endif
.if !defined(NOPORTDOCS)
    @${MKDIR} ${DOCSDIR}
    cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR}
.endif
    @${SETENV} PKG_PREFIX=${PREFIX} \
        ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL

    @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:"
    @${ECHO_CMD} ""
    @${CAT} ${PKGMESSAGE}
    @${ECHO_CMD} ""
.if defined(WITH_SQUID_COSS)
    @${ECHO_CMD} "Note: COSS support is currently not available in Squid-3."
    @${ECHO_CMD} "Please check your squid.conf and comment out any 'cache_dir coss' definitions."
    @${ECHO_CMD} ""
.endif

.include <bsd.port.post.mk>