- Don't hardcode /usr/local.

- Also add a mailer.conf that allows sendmail to be replaced with qmail.

PR:		19449
Submitted by:	Mike Meyer <mwm@mired.org> and maintainer

5 files changed, 120 insertions, 7 deletions

diff --git a/mail/qmail/Makefile b/mail/qmail/Makefile
index 9e2ed7499a0..1113a5f4e96 100644
--- a/mail/qmail/Makefile
+++ b/mail/qmail/Makefile
@@ -54,7 +54,8 @@ PLIST_SUB=	DOCDIR=${DOCDIR}
 DOCFILES+=	${WRKSRC}/BLURB ${WRKSRC}/BLURB2 ${WRKSRC}/BLURB3 \
 		${WRKSRC}/BLURB4 ${WRKSRC}/INTERNALS ${WRKSRC}/SECURITY \
 		${WRKSRC}/THOUGHTS ${FILESDIR}/PORT_NOTES \
-		${FILESDIR}/PORT_NOTES_FreeBSD_40-RELEASE
+		${FILESDIR}/PORT_NOTES_FreeBSD_40-RELEASE \
+		${WRKDIR}/mailer.conf.sample
 
 # The following docfiles are normally installed with qmail-hier
 DOCFILES+=	${WRKSRC}/FAQ ${WRKSRC}/UPGRADE ${WRKSRC}/SENDMAIL \
@@ -135,10 +136,10 @@ do-install:
 	@# This is not part of qmail proper, hence the 2nd class citizenship
 	${INSTALL_SCRIPT} ${FILESDIR}/mkaliasdir ${PREFIX}/${DOCDIR}
 	@cd ${PREFIX}/configure ; ./config
-	@${MKDIR} /usr/local/etc/rc.d
-	@${LN} -sf ${PREFIX}/rc /usr/local/etc/rc.d/qmail.sh
+	@${MKDIR} ${LOCALBASE}/etc/rc.d
+	@${LN} -sf ${PREFIX}/rc ${LOCALBASE}/etc/rc.d/qmail.sh
 	@${ECHO}
-	@${SED} s!/var/qmail!${PREFIX}/!g ${PKGDIR}/MESSAGE | /usr/bin/fmt
+	@${SED} s!/var/qmail!${PREFIX}!g ${PKGDIR}/MESSAGE | /usr/bin/fmt
 
 # hack to allow slave ports to include bsd.port.pre.mk and then this file
 .if defined(_PREMKINCLUDED)
@@ -150,7 +151,7 @@ do-install:
 # Ugh...  ;-)
 thereal-post-patch:
 .for i in ${BOOTFILES}
-	if [ `dirname $i` != ${FILESDIR} ] ; \
+	@if [ `dirname $i` != ${FILESDIR} ] ; \
 	then \
 		${CP} $i.sh $i.sh.orig; \
 		(head -c `${EXPR} \`ls -l $i.sh.orig \
@@ -158,6 +159,94 @@ thereal-post-patch:
 		    > $i.sh ; \
 	fi
 .endfor
+	@${SED} s!/var/qmail/!${PREFIX}/!g ${FILESDIR}/mailer.conf.sample > \
+		${WRKDIR}/mailer.conf.sample
+
+# Double Ugh... ;-)
+${WRKDIR}/.thereal_disable_sendmail_done:
+	@if [ ! -d ${WRKDIR} ]; \
+	then \
+		${MKDIR} ${WRKDIR} ; \
+	fi
+
+# I would like some input on the targets below. Only constructive ones
+# please. :)
+# based on shells/pdksh /etc/shells update PLIST.
+thereal-disable-sendmail: ${WRKDIR}/.thereal_disable_sendmail_done /etc/rc.conf 
+	@if [ -f /etc/rc.conf ]; \
+	then \
+		${CP} /etc/rc.conf /etc/rc.conf.bak && \
+			${GREP} -v sendmail_enable /etc/rc.conf.bak > \
+				/etc/rc.conf && \
+			${TOUCH} ${WRKDIR}/.thereal_disable_sendmail_done ; \
+	else \
+		${ECHO_MSG} ¨===> ERROR: YOU DO NOT HAVE A VALID /etc/rc.conf¨ ; \
+		${ECHO_MSG} ¨===> FIX this and try again¨ ; \
+		${FALSE} ; \
+	fi
+
+disable-sendmail: thereal-disable-sendmail
+	@${ECHO_MSG} "===> I hope you know what you are doing:"
+	@${ECHO_MSG} "===> You just told your system to not"
+	@${ECHO_MSG} "===> automaticaly start sendmail on your"
+	@${ECHO_MSG} "===> next startup."
+	@${ECHO_MSG} "===> (i.e., added sendmail_enable=\¨NO\¨ to rc.conf)"
+	@if [ -f /etc/rc.conf ]; \
+	then \
+		${ECHO} sendmail_enable=\"NO\" >> /etc/rc.conf ; \
+	fi
+
+enable-sendmail: thereal-disable-sendmail
+	@${ECHO_MSG} "===> I hope you know what you are doing:"
+	@${ECHO_MSG} "===> You just told your system to"
+	@${ECHO_MSG} "===> automaticaly start sendmail on your"
+	@${ECHO_MSG} "===> next startup."
+	@${ECHO_MSG} "===> (i.e., removed sendmail_enable=\¨NO\¨ from rc.conf)"
+
+enable-qmail: install disable-sendmail
+	@if [ -f /etc/mail/mailer.conf ]; \
+	then \
+		${CP} /etc/mail/mailer.conf /etc/mail/mailer.conf.bak && \
+		${CP} ${WRKDIR}/mailer.conf.sample /etc/mail/mailer.conf ; \
+	else \
+		${ECHO_MSG} "===> ERROR: YOU DO NOT HAVE A VALID /etc/mail/mailer.conf" ; \
+		${ECHO_MSG} "===> FIX this and try again" ; \
+		${ECHO_MSG} "===> or, do \¨make force_enable_qmail\¨ if you are sure" ; \
+		${ECHO_MSG} "===> you want this port replacing some binaries" ; \
+		${ECHO_MSG} "===> IF THIS FEELS UNEASY, read ${PREFIX}/${DOCDIR}/REMOVE.sendmail and do it manually" ; \
+	fi
+	@${ECHO} "===> Do not forget to choose an appropriate qmail startup"
+	@${ECHO} "===> script. Go through ${PREFIX}/boot, choose one"
+	@${ECHO} "===> and copy the chosen script as ${PREFIX}/rc"
+	@${ECHO} "===> For example, \¨cp ${PREFIX}/boot/proc+df ${PREFIX}/rc\¨"
+
+
+# taken from mail/postfix idea
+force-enable-qmail: install disable-sendmail
+	@${ECHO_MSG} "===> Replacing sendmail"
+	@if [ -e /usr/sbin/sendmail ]; then \
+		${MV} -f /usr/sbin/sendmail /usr/sbin/sendmail.OFF && \
+		${CHMOD} 0 /usr/sbin/sendmail.OFF; \
+	fi
+	@if [ -e ${PREFIX}/bin/sendmail ]; then \
+		${LN} -s ${PREFIX}/bin/sendmail /usr/sbin/sendmail; \
+	fi
+	@${ECHO_MSG} "===> Replacing mailq"
+	@if [ -e /usr/bin/mailq ]; then \
+		${MV} -f /usr/bin/mailq /usr/bin/mailq.OFF && \
+		${CHMOD} 0 /usr/bin/mailq.OFF; \
+	fi  
+	@if [ -e ${PREFIX}/bin/qmail-qread ]; then \
+		${LN} -s ${PREFIX}/bin/qmail-qread /usr/bin/mailq; \
+	fi
+	@${ECHO_MSG} "===> Replacing newaliases"
+	@if [ -e /usr/bin/newaliases ]; then \
+		${MV} -f /usr/bin/newaliases /usr/bin/newaliases.OFF && \
+		${CHMOD} 0 /usr/bin/newaliases.OFF; \
+	fi
+	@if [ -e ${PREFIX}/bin/newaliases ]; then \
+		${LN} -s ${PREFIX}/bin/newaliases /usr/bin/newaliases; \
+	fi
 
 # The users are instructed (in PORT_NOTES) to install ${QUEUE_DIR}/rc
 # themselves.  Each /var/qmail/ should have its own rc.  On many machines,
diff --git a/mail/qmail/files/PORT_NOTES_FreeBSD_40-RELEASE b/mail/qmail/files/PORT_NOTES_FreeBSD_40-RELEASE
index a3b92efed63..25963439d60 100644
--- a/mail/qmail/files/PORT_NOTES_FreeBSD_40-RELEASE
+++ b/mail/qmail/files/PORT_NOTES_FreeBSD_40-RELEASE
@@ -45,9 +45,14 @@ Here follows my personal /etc/mail/mailer.conf
 
 sendmail        /var/qmail/bin/sendmail
 send-mail       /var/qmail/bin/sendmail
-mailq           /var/qmail/bin/qmail-qstat
+mailq           /var/qmail/bin/qmail-qread
 newaliases      /var/qmail/bin/newaliases
 
+There is a sample mailer.conf in this directory, please install
+over the /etc/mail/mailer.conf to unfold qmail as your default MTA.
+Please don´t forget to backup /etc/mail/mailer.conf before doing
+so. Better safe then sorry.
+
 So, whenever you call sendmail, in fact, you are using the appropriate
 "qmail-clones".
 
diff --git a/mail/qmail/files/mailer.conf.sample b/mail/qmail/files/mailer.conf.sample
new file mode 100644
index 00000000000..970dcbe55f3
--- /dev/null
+++ b/mail/qmail/files/mailer.conf.sample
@@ -0,0 +1,8 @@
+# Configuration for mailwrapper is kept in /etc/mail/mailer.conf.
+# Replace that file with this one to enable qmail under a sendmail
+# disguise. Very useful.
+
+sendmail        /var/qmail/bin/sendmail
+send-mail       /var/qmail/bin/sendmail
+mailq           /var/qmail/bin/qmail-qread
+newaliases      /var/qmail/bin/newaliases
diff --git a/mail/qmail/pkg-message b/mail/qmail/pkg-message
index 008d54bf1f4..6b860bd3cbd 100644
--- a/mail/qmail/pkg-message
+++ b/mail/qmail/pkg-message
@@ -6,3 +6,11 @@ qmail, and finally replacing sendmail with qmail.
 
 You should also add /var/qmail/man to your MANPATH (see manpath(1)
 or login.conf(5)).
+
+You can enable qmail as your default mailer:
+
+# this will disable the default MTA
+1) do "make disable-sendmail"
+
+# enable qmail as your default MTA
+2) do "make enable-qmail"
diff --git a/mail/qmail/pkg-plist b/mail/qmail/pkg-plist
index a92bd910698..13d33730f3b 100644
--- a/mail/qmail/pkg-plist
+++ b/mail/qmail/pkg-plist
@@ -148,6 +148,7 @@ configure/dnsptr
 %%DOCDIR%%/PORT_NOTES
 %%DOCDIR%%/PORT_NOTES_FreeBSD_40-RELEASE
 %%DOCDIR%%/SYSDEPS
+%%DOCDIR%%/mailer.conf.sample
 %%DOCDIR%%/mkaliasdir
 boot/maildir
 @dirrm %%DOCDIR%%
@@ -155,4 +156,6 @@ boot/maildir
 @dirrm boot
 @dirrm bin
 
-@unexec echo "If you are permanently removing qmail, you should also ``rm -Rf ${PKG_PREFIX}/alias ${PKG_PREFIX}/control ${PKG_PREFIX}/queue ${PKG_PREFIX}/users'' and remove the qmail users/groups." | /usr/bin/fmt
+@unexec echo "1) If you are permanently removing qmail, you should also ``rm -Rf ${PKG_PREFIX}/alias ${PKG_PREFIX}/control ${PKG_PREFIX}/queue ${PKG_PREFIX}/users'' and remove the qmail users/groups." | /usr/bin/fmt
+@unexec echo "2) Do not forget to reconfigure your /etc/mail/mailer.conf to use your older MTA, or reconfigure your old MTA binaries if you decided to replace them." | /usr/bin/fmt
+@unexec echo "3) Do not forget to enable sendmail as your default MTA if you have to. Go to mail/qmail portsdir and do a 'make enable-sendmail'" | /usr/bin/fmt