diff options
| -rw-r--r-- | lang/python+ipv6/Makefile | 16 | ||||
| -rw-r--r-- | lang/python-devel/Makefile | 16 | ||||
| -rw-r--r-- | lang/python/Makefile | 16 | ||||
| -rw-r--r-- | lang/python15/Makefile | 16 | ||||
| -rw-r--r-- | lang/python20/Makefile | 16 | ||||
| -rw-r--r-- | lang/python21/Makefile | 16 | ||||
| -rw-r--r-- | lang/python22/Makefile | 16 | ||||
| -rw-r--r-- | lang/python23/Makefile | 16 | ||||
| -rw-r--r-- | lang/python24/Makefile | 16 | ||||
| -rw-r--r-- | lang/python25/Makefile | 16 | ||||
| -rw-r--r-- | lang/python26/Makefile | 16 | ||||
| -rw-r--r-- | lang/python27/Makefile | 16 | ||||
| -rw-r--r-- | lang/python30/Makefile | 16 | ||||
| -rw-r--r-- | lang/python31/Makefile | 16 | ||||
| -rw-r--r-- | lang/python32/Makefile | 16 |
15 files changed, 210 insertions, 30 deletions
diff --git a/lang/python+ipv6/Makefile b/lang/python+ipv6/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python+ipv6/Makefile +++ b/lang/python+ipv6/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python-devel/Makefile b/lang/python-devel/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python-devel/Makefile +++ b/lang/python-devel/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python/Makefile b/lang/python/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python/Makefile +++ b/lang/python/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python15/Makefile b/lang/python15/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python15/Makefile +++ b/lang/python15/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python20/Makefile b/lang/python20/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python20/Makefile +++ b/lang/python20/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python21/Makefile b/lang/python21/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python21/Makefile +++ b/lang/python21/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python22/Makefile b/lang/python22/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python22/Makefile +++ b/lang/python22/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python23/Makefile b/lang/python23/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python23/Makefile +++ b/lang/python23/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python24/Makefile b/lang/python24/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python24/Makefile +++ b/lang/python24/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python25/Makefile b/lang/python25/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python25/Makefile +++ b/lang/python25/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python26/Makefile b/lang/python26/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python26/Makefile +++ b/lang/python26/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python27/Makefile b/lang/python27/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python27/Makefile +++ b/lang/python27/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python30/Makefile b/lang/python30/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python30/Makefile +++ b/lang/python30/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python31/Makefile b/lang/python31/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python31/Makefile +++ b/lang/python31/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python diff --git a/lang/python32/Makefile b/lang/python32/Makefile index a7380d8190e..328328c89dd 100644 --- a/lang/python32/Makefile +++ b/lang/python32/Makefile @@ -3,7 +3,7 @@ # Date created: 08 August 1995 # Whom: jkh # -# $Id: Makefile,v 1.13 1997/04/20 13:19:11 wosch Exp $ +# $Id: Makefile,v 1.14 1997/05/14 07:35:11 tg Exp $ # DISTNAME= python1.4 @@ -25,8 +25,20 @@ MAKE_FLAGS+= 'OPT=${CFLAGS}' INSTALL_TARGET= install MAN1= python.1 +# +# If you want to use Python's thread module, you need to set WITH_THREADS +# to 'yes', and you must have the FreeBSD threading c library (libc_r) +# installed. See 'man 3 pthread' for details on libc_r. +# +WITH_THREADS= yes +SETUP_FILE= 'Setup' +.if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes +CONFIGURE_ARGS= --with-thread +SETUP_FILE= 'Setup.thread' +.endif + post-configure: - ${CP} ${FILESDIR}/Setup ${WRKSRC}/Modules + ${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup post-install: strip ${PREFIX}/bin/python |