path: root/Mk/bsd.tcl.mk

# -*- mode: Makefile; tab-width: 4; -*-
# ex: ts=4
#
# $FreeBSD$
#

.if !defined(_POSTMKINCLUDED) && !defined(Tcl_Pre_Include)

Tcl_Pre_Include=        bsd.tcl.mk
Tcl_Include_MAINTAINER= ports@FreeBSD.org

# USE_TCL       - Add library dependency on Tcl. If no version is given by the maintainer
#             via the port or by the user via defined variable try to find the highest
#             stable installed version.
#             Available values: yes 85+ 84+ 83+ 82+ 80+ 85 84 83 82 80
#             NOTE: - default value 84 is used in case of USE_TCL=yes
#
# USE_TCL_BUILD     - Add buildtime dependency on Tcl (tclsh).
#             Available values: see USE_TCL
#             NOTE: - has no effect if USE_TCL is defined
#
# USE_TCL_RUN       - Add runtime dependency on Tcl (tclsh).
#             Available values: see USE_TCL
#             NOTE: - has no effect if USE_TCL is defined
#               - value is implied by USE_TCL_BUILD (if defined)
#
# USE_TCL_WRAPPER   - Depend on the tclsh wrapper to run. Ports that do not explicitly require
#             a specific tclsh version may use this.
#             The tclsh wrapper script installs into ${LOCALBASE}/bin/tclsh
#             NOTE: - USE_TCL_WRAPPER and USE_TCL can be used together
#                   - ports using the wrapper should support default Tcl (8.4)
##
# INVALID_TCL_VER   - This variable contains a list of Tcl versions not supported by the port.
#             This setting is effective only when USE_TCL is set to a range (e.g. 83+)
# WITH_TCL_VER      - User defined global variable to set Tcl version
#             This variable is effective only if USE_TCL is set to a range (e.g. 83+)
#             and WITH_TCL_VER points inside that range.
#             NOTE: INVALID_TCL_VER takes precedence
# <UNIQUENAME>_WITH_TCL_VER - User defined port specific variable to set Tcl version
##
# USE_TCL_THREADS   - If defined, Tcl a threaded version of tcl is required.
#             NOTE: support for threaded builds starts with version 84
# USE_TCL_NO_THREADS    - If defined, port may not use a threaded Tcl, even if requested via
#             USE_TCL_THREADS or WITH_TCL_THREADS
# WITH_TCL_THREADS  - User defined variable to use Tcl with threads
# <UNIQUENAME>_WITH_TCL_THREADS - User defined port specific variable to require Tcl with threads
##
# TCL_VER       - Detected by bsd.tcl.mk. Contains the version number of Tcl to be used.
#
##
# USE_TK        - Add library dependency on Tk. If no version is given by the maintainer
#             via the port or by the user via defined variable try to find the highest
#             stable installed version.
#             Avaliable values: yes 85+ 84+ 83+ 82+ 80+ 85 84 83 82 80
#             NOTE: - overrides USE_TCL
#                   - default value 84 is used in case of USE_TK=yes
#
# USE_TK_BUILD      - Add buildtime dependency on Tk (wish).
#             Available values: see USE_TK
#             NOTE: - has no effect if USE_TK is defined
#
# USE_TK_RUN        - Add runtime dependency on Tk (wish).
#             Available values: see USE_TK
#             NOTE: - has no effect if USE_TK is defined
#               - value is implied by USE_TK_BUILD (if defined)
#
# USE_TK_WRAPPER    - Depend on the wish wrapper to run. Ports that do not explicitly require
#             a specific wish version may use this.
#             The wish wrapper script installs into ${LOCALBASE}/bin/wish
#             NOTE: - USE_TK_WRAPPER and USE_TK can be used together.
#                   - ports using the wrapper should support default Tk (8.4)
##
# INVALID_TK_VER    - This variable contains a list of Tk versions not supported by the port
#             This setting is effective only when USE_TK is set to a range (e.g. 83+)
# WITH_TK_VER       - User defined global variable to set Tk version.
#             This variable is effective only if USE_TK is set to a range (e.g. 83+)
#             and WITH_TK_VER points inside that range.
#             NOTE: overrides WITH_TCL_VER.
# <UNIQUENAME>_WITH_TK_VER  - User defined port specific variable to set Tk version
#             NOTE: overrides <UNIQUENAME>_WITH_TCL_VER.
##
# USE_TK_THREADS    - Tk has to obey tcl in threads. A threaded Tk requires
#             a threaded Tcl and a non-threaded Tcl requires a non-threaded Tk.
#             This variable defines USE_TCL_THREADS
# USE_TK_NO_THREADS - If defined, port may not use a threaded Tk, even if requested via
#             USE_TK_THREADS or WITH_TK_THREADS. Defines USE_TCL_NO_THREADS
# WITH_TK_THREADS   - User defined variable to use Tk with threads
# <UNIQUENAME>_WITH_TK_THREADS  - User defined port specific variable to require Tk with threads
###
# TCL_LIBDIR        - Path where tcl libraries can be found
#
# TCL_INCLUDEDIR    - Path where tcl C headers can be found
##
# TK_LIBDIR     - Path where tk libraries can be found
#
# TK_INCLUDEDIR     - Path where tk C headers can be found
##
# TCLSH         - Path to tclsh executable respecting Tcl version
#             or to the tclsh wrapper if USE_TCL_WRAPPER is set
#
# WISH          - Path to wish executable respecting Tk version
#             or to the wish wrapper if USE_TK_WRAPPER is set
#
##
# PATCH_TCL_SCRIPTS - List of tcl scripts that need to be patched to replace
#             tclsh calls with tclsh${TK_VER} calls. Also note that
#             post-patch target is used.
#
# PATCH_TK_SCRIPTS  - List of tcl scripts that need to be patched to replace
#             wish calls with wish${TK_VER} calls. Also note that
#             post-patch target is used.

# Set RUN_DEPENDS for wrappers
. if defined(USE_TCL_WRAPPER)
RUN_DEPENDS+=       tclsh:${PORTSDIR}/lang/tcl-wrapper
. endif
. if defined(USE_TK_WRAPPER)
RUN_DEPENDS+=       wish:${PORTSDIR}/x11-toolkits/tk-wrapper
. endif

# Process USE_TCL_BUILD and USE_TCL_RUN
.if !defined(USE_TCL)
. if defined(USE_TCL_RUN)
USE_TCL:=   ${USE_TCL_RUN}
_TCL_RUN_DEPENDS=   yes
. endif
. if defined(USE_TCL_BUILD)
USE_TCL:=   ${USE_TCL_BUILD}
_TCL_BUILD_DEPENDS= yes
. endif
.endif

# Process USE_TK_BUILD and USE_TK_RUN
.if !defined(USE_TK)
. if defined(USE_TK_RUN)
USE_TK:=    ${USE_TK_RUN}
_TK_RUN_DEPENDS=    yes
. endif
. if defined(USE_TK_BUILD)
USE_TK:=    ${USE_TK_BUILD}
_TK_BUILD_DEPENDS=  yes
. endif
.endif

# Set WITH_TCL_THREADS or WITH_TK_THREADS if port-specific define
. if defined(${UNIQUENAME:U:S,-,_,}_WITH_TCL_THREADS)
WITH_TCL_THREADS=   yes
. endif
. if defined(${UNIQUENAME:U:S,-,_,}_WITH_TK_THREADS)
WITH_TK_THREADS=    yes
.endif

# If a threaded Tcl or Tk is requested we require a threaded Tcl
. if !defined(USE_TK_NO_THREADS) && !defined(USE_TCL_NO_THREADS)
.  if defined(USE_TCL_THREADS) || defined(USE_TK_THREADS)
USE_TCL_THREADS=    yes
.  endif
.  if defined(WITH_TK_THREADS)
WITH_TCL_THREADS=   ${WITH_TK_THREADS}
.  endif
. endif

# Override the global WITH_TCL_VER or WITH_TK_VER with the
# port specific <UNIQUENAME>_WITH_TCL_VER or <UNIQUENAME>_WITH_TK_VER
. if defined(${UNIQUENAME:U:S,-,_,}_WITH_TCL_VER)
WITH_TCL_VER:=  ${${UNIQUENAME:U:S,-,_,}_WITH_TCL_VER}
. endif
. if defined(${UNIQUENAME:U:S,-,_,}_WITH_TK_VER)
WITH_TK_VER:=   ${${UNIQUENAME:U:S,-,_,}_WITH_TK_VER}
. endif

# If USE_TK, WITH_TK_VER, INVALID_TK_VER is defined,
# set USE_TCL, WITH_TCL_VER, INVALID_TCL_VER to identical values
# we require the same version of Tcl for Tk
. if defined(USE_TK)
.  if !defined(USE_TCL)
_TK_ONLY=   yes
.  endif
USE_TCL:=   ${USE_TK}
. endif
. if defined(WITH_TK_VER)
WITH_TCL_VER:=  ${WITH_TK_VER}
. endif
. if defined(INVALID_TK_VER)
INVALID_TCL_VER:=   ${INVALID_TK_VER}
. endif

#
# Tcl part
#
. if defined(USE_TCL)

_TCL_DEFAULT_VERSION=       84
_TCL_VERSIONS=          85 84 83 82 80
_TCL_THREADS_VERSIONS=      85 84
_TCL_RANGE_VERSIONS=        85+ 84+ 83+ 82+ 80+
_TCL_THREADS_RANGE_VERSIONS=    85+ 84+

# For specifying [85, 84, ..]+
_TCL_80P=   80 82 83 84 85
_TCL_82P=   82 83 84 85
_TCL_83P=   83 84 85
_TCL_84P=   84 85
_TCL_85P=   85

# Set the default Tcl version and check if USE_TCL=yes was given
.  if ${USE_TCL} == "yes"
USE_TCL=    ${_TCL_DEFAULT_VERSION}
.  endif

# Support for obsolete 84-thread and 85-thread definitions
.  if ${USE_TCL} == "84-thread" || ${USE_TCL} == "85-thread"
USE_TCL:=       ${USE_TCL:S/-thread//}
USE_TCL_THREADS=    yes
.  endif

# Ignore WITH_TCL_THREADS if USE_TCL is
# not in _TCL_THREADS_VERSIONS or _TCL_RANGE_VERSIONS
.  if defined(WITH_TCL_THREADS)
.   for ver in ${_TCL_THREADS_VERSIONS} ${_TCL_RANGE_VERSIONS}
.    if ${USE_TCL} == "${ver}"
USE_TCL_THREADS=    yes
.    endif
.   endfor
.  endif

# Check if a build with threads is required
.  if !defined(USE_TCL_NO_THREADS) && !defined(USE_TK_NO_THREADS) && !defined(BUILDING_TCL_THREADS) && !defined(BUILDING_TK_THREADS)
.   if defined(USE_TCL_THREADS)
_TCL_THREADS_PORT=  -thread
_TCL_THREADS_SUFFIX=    -threads

# Threaded Tcl/Tk accepts only ranges starting with 84+
# reset the range to 84+ if the value is lower
.    for ver in ${_TCL_RANGE_VERSIONS}
.     if ${USE_TCL} == "${ver}"
_TCL_T_BAD_RANGE=   yes
.      for tver in ${_TCL_THREADS_RANGE_VERSIONS}
.       if ${USE_TCL} == "${tver}"
_TCL_T_BAD_RANGE=   no
.       endif
.      endfor
.     endif
.    endfor
.    if defined(_TCL_T_BAD_RANGE) && ${_TCL_T_BAD_RANGE} == "yes"
USE_TCL=    84+
.    endif

.   endif
. endif

_TCL_VER=   no

# Check if we have user-defined WITH_TCL_VER and if it matches
# the range specified in port's USE_TCL or USE_TK
.  if defined(WITH_TCL_VER)
.   for ver in ${_TCL_RANGE_VERSIONS}
.    if ${USE_TCL} == "${ver}" && ${_TCL_VER} == "no"
_MATCHED_TCL_VER:=  ${USE_TCL:S/+//}
.     for tcl in ${_TCL_${_MATCHED_TCL_VER}P}
.      if ${WITH_TCL_VER} == ${tcl}
#  Check if user supplied WITH_TCL is in the INVALID_TCL_VER list
_BRKTCL=    no
.       for iver in ${INVALID_TCL_VER}
.        if ${WITH_TCL_VER} == ${iver}
_BRKTCL=    yes
.    endif
.       endfor
#  If WITH_TCL is not in the INVALID_TCL_VER list, use it
#  otherwise take default from port
.       if ${_BRKTCL} == "no"
_TCL_VER=   ${WITH_TCL_VER}
USE_TCL=    ${_TCL_VER}
.       endif
.      endif
.     endfor
.    endif
.   endfor
.  endif

# Check for highest installed Tcl (if e.g. 83+ is specified)
# The default version of Tcl counts as the highest
.  if ${_TCL_VER} == "no"
.   for ver in ${_TCL_RANGE_VERSIONS}
.    if ${USE_TCL} == "${ver}" && ${_TCL_VER} == "no"
_MATCHED_TCL_VER:=  ${USE_TCL:S/+//}
.     for tcl in ${_TCL_${_MATCHED_TCL_VER}P}
#  Skip versions we are incompatible with
_BRKTCL=    no
.      for iver in ${INVALID_TCL_VER}
_INVALID_VER=   ${iver}
.       if ${_INVALID_VER} == ${tcl}
_BRKTCL=    yes
.   endif
.      endfor
.      if ${_BRKTCL} == "no"
#  We have matched a supported version
_TCL_VER_MATCH=${tcl}
#  Check if the default version is supported
.   if ${_TCL_VER_MATCH} == ${_TCL_DEFAULT_VERSION}
_TCL_SUPPORT_DEFAULT=   yes
.   endif
#  Look for installed versions
.       if exists(${LOCALBASE}/include/tcl${tcl:S/8/8./}/tcl.h)
_TCL_INST_VER=${tcl}
#  Check if the default version is installed
.        if ${_TCL_INST_VER} == ${_TCL_DEFAULT_VERSION}
_TCL_HAVE_DEFAULT=  yes
.        endif
.   endif
.      endif
.     endfor
.    endif
.   endfor
.   if defined(_MATCHED_TCL_VER)
.    if defined(_TCL_INST_VER)
#  Default version is installed
.     if defined(_TCL_HAVE_DEFAULT)
USE_TCL=    ${_TCL_DEFAULT_VERSION}
.     else
#  Default version is not installed, but another supported version is installed
USE_TCL=    ${_TCL_INST_VER}
.     endif
#  No supported version is installed, we want to install the default version
.    elif defined(_TCL_SUPPORT_DEFAULT)
USE_TCL=    ${_TCL_DEFAULT_VERSION}
.    elif defined(_TCL_VER_MATCH)
#  Default version is not wanted, select next best match
USE_TCL=    ${_TCL_VER_MATCH}
.    else
#  INVALID_[TCL|TK]_VER removes all choices from the USE_[TCL|TK] range
IGNORE=     selection of a Tcl/Tk version is not possible. Please check USE_[TCL|TK] and INVALID_[TCL|TK]_VER
.    endif
.   endif
.  endif

TCL_VER:=   ${USE_TCL:S/8/8./}

# Check if a correct Tcl/Tk version was specified
_FOUND=     no
.  for ver in ${_TCL_VERSIONS}
.   if ${USE_TCL} == "${ver}" && ${_FOUND} == "no"
_FOUND=     yes
.   endif
.  endfor

.  if ${_FOUND} == "yes" && defined(USE_TCL_THREADS)
_FOUND=     no
_THREADED_NOT_FOUND=    yes
.   for ver in ${_TCL_THREADS_VERSIONS}
.    if ${USE_TCL} == "${ver}" && ${_FOUND} == "no"
_FOUND=     yes
.    endif
.   endfor
.  endif

.  if ${_FOUND} == "yes"

TCL_INCLUDEDIR=     ${LOCALBASE}/include/tcl${TCL_VER}
TCL_LIBDIR=     ${LOCALBASE}/lib/tcl${TCL_VER}${_TCL_THREADS_SUFFIX}
TCLSH=          ${LOCALBASE}/bin/tclsh${TCL_VER}${_TCL_THREADS_SUFFIX}

# Add dependencies
.   if !defined(_TK_ONLY)
.    if !defined(_TCL_RUN_DEPENDS) && !defined(_TCL_BUILD_DEPENDS)
LIB_DEPENDS+=   tcl${USE_TCL}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/lang/tcl${USE_TCL}${_TCL_THREADS_PORT}
.    else
.     if defined(_TCL_BUILD_DEPENDS)
BUILD_DEPENDS+= tclsh${TCL_VER}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/lang/tcl${USE_TCL}${_TCL_THREADS_PORT}
.     endif
.     if defined(_TCL_RUN_DEPENDS)
RUN_DEPENDS+=   tclsh${TCL_VER}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/lang/tcl${USE_TCL}${_TCL_THREADS_PORT}
.     endif
.    endif
.   endif

.  elif defined(_THREADED_NOT_FOUND) && !defined(IGNORE)
IGNORE=     the defined version of Tcl/Tk does not support threads: ${USE_TCL}
.  elif !defined(IGNORE)
IGNORE=     unknown Tcl/Tk version specified: ${USE_TCL}
.  endif

#
# Tk part
#
.  if defined(USE_TK)

# We now read the version numbers from the Tcl part
USE_TK:=    ${USE_TCL}
TK_VER:=    ${USE_TCL:S/8/8./}

.   if !defined(_TK_RUN_DEPENDS) && !defined(_TK_BUILD_DEPENDS)
LIB_DEPENDS+=   tk${USE_TK}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/x11-toolkits/tk${USE_TK}${_TCL_THREADS_PORT}
.   else
.    if defined(_TK_BUILD_DEPENDS)
BUILD_DEPENDS+= wish${TK_VER}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/x11-toolkits/tk${USE_TK}${_TCL_THREADS_PORT}
.    endif
.    if defined(_TK_RUN_DEPENDS)
RUN_DEPENDS+=   wish${TK_VER}${_TCL_THREADS_SUFFIX}:${PORTSDIR}/x11-toolkits/tk${USE_TK}${_TCL_THREADS_PORT}
.    endif
.   endif

TK_INCLUDEDIR=      ${LOCALBASE}/include/tk${TK_VER}
TK_LIBDIR=      ${LOCALBASE}/lib/tk${TK_VER}${_TCL_THREADS_SUFFIX}
WISH=           ${LOCALBASE}/bin/wish${TK_VER}${_TCL_THREADS_SUFFIX}

.  endif # defined(USE_TK)
. endif # defined(USE_TCL)

# (Re)set WISH and TCLSH to the wrapper, if defined
. if defined(USE_TCL_WRAPPER)
TCLSH=          ${LOCALBASE}/bin/tclsh
. endif
. if defined(USE_TK_WRAPPER)
WISH=           ${LOCALBASE}/bin/wish
. endif

.endif # !defined(_POSTMKINCLUDED) && !defined(Tcl_Pre_Include)

.if defined(_POSTMKINCLUDED) && !defined(Tcl_Post_Include)

Tcl_Post_Include=   bsd.tcl.mk

. if defined(PATCH_TCL_SCRIPTS) || defined (PATCH_TK_SCRIPTS)
.  if !target(post-patch)
post-patch:
.   if defined(PATCH_TCL_SCRIPTS) && defined(TCLSH)
.    for tcl_script in ${PATCH_TCL_SCRIPTS}
    @${REINPLACE_CMD} -e 's,tclsh,${TCLSH},' ${WRKSRC}/${tcl_script}
.    endfor
.   endif
.   if defined(PATCH_TK_SCRIPTS) && defined(WISH)
.    for tk_script in ${PATCH_TK_SCRIPTS}
    @${REINPLACE_CMD} -e 's,wish,${WISH},' ${WRKSRC}/${tk_script}
.    endfor
.   endif
.  endif # !target(post-patch)
. endif # defined(PATCH_TCL_SCRIPTS) || defined (PATCH_TK_SCRIPTS)
.endif # defined(_POSTMKINCLUDED) && !defined(Tcl_Post_Include)