added questions about KDE, redid other questions.

svn path=/trunk/; revision=10081

1 files changed, 516 insertions, 444 deletions

diff --git a/help/C/evolution-faq.sgml b/help/C/evolution-faq.sgml
index a497b98da2..dcee6b5b07 100644
--- a/help/C/evolution-faq.sgml
+++ b/help/C/evolution-faq.sgml
@@ -3,19 +3,347 @@
 -->
 <appendix id="evolution-faq">
   <title>Frequently Asked Questions About Ximian Evolution</title>
-  <para>
-    Here are some frequently asked questions about the
-    <application>Evolution</application> groupware suite from
-    Ximian.
-  </para>
-  
+    	<para>
+	 Here are some frequently asked questions about the
+	 <application>Evolution</application> groupware suite from
+	 Ximian.  If you have a question that's not listed, you can
+	 contact us at evolve@ximian.com.
+	</para>
+
+  <sect1 id="faq-features">
+    <title>Features</title>
+
+    <qandaset>
+
+      <qandaentry>
+	<question>
+	  <para>
+	   How can I use Evolution with Microsoft Exchange or Lotus Notes?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+             If your server uses standard open protocols like IMAP,
+             POP, and SMTP, you can use Evolution with it.  You can
+             share addresses with vCards and calendar items with iCal
+             appointments.  We hope to have support for the
+             proprietary segments of Exchange and Notes severs
+             eventually, but this will come after Evolution 1.0.
+	  </para>
+        </answer>
+       </qandaentry>
+
+      <qandaentry>
+	<question>
+	  <para>
+	     Can I use Evolution with KDE?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+             Evolution will work fine in KDE.  You will need to
+             install all of the GNOME libraries that it depends on.
+             Also, certain configuration options, such as default
+             fonts and the message editor keybinding behavior, must be
+             changed using the GNOME Control Center application (this
+             will also run from within KDE).
+	  </para>
+        </answer>
+       </qandaentry>
+
+      <qandaentry>
+	<question>
+	  <para>
+	    How can I remove or rename a folder?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+	    We're going to add a good way to do this soon.  In the
+	    mean time, you have to remove it by hand.
+	  </para>
+
+	  <para>
+	    All the folders are stored in
+	    <filename>~/evolution/local</filename>.  Each folder is a
+	    directory containing the data files, as well as a
+	    <filename>subfolders</filename> directory that contains
+	    all its subfolders.  So for example if you have a
+	    subfolder of the <filename>Inbox</filename> called
+	    <filename>Foo</filename>, you can run the following
+	    command to get rid of it (and all it subfolders):
+          </para>
+
+	  <programlisting>
+rm -rf ~/evolution/local/Inbox/subfolders/Foo
+          </programlisting>
+
+	  <para>
+	    You should do this after exiting Evolution.
+	  </para>
+	</answer> 
+      </qandaentry>
+ 
+      <qandaentry>
+	<question>
+	  <para>
+	    Why doesn't drag and drop between folders seem to work?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+	    The implementation isn't finished, although it's planned
+	    to be finished soon.
+  	  </para>
+
+	  <para>
+	    In the meantime, you can copy the folders' contents by
+	    hand from the shell (please do this after quitting
+	    Evolution).  For example:
+	  </para>
+
+	  <programlisting>
+cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/Bar
+	  </programlisting>
+
+	  <para>
+	    Likewise, you can use <command>mv</command> to rename or
+	    move folders.
+	  </para>
+	</answer>
+      </qandaentry>
+
+      <qandaentry>
+      <question>
+	<para>
+	  Can I read mail from a mailbox file created by some other
+	  application (e.g. Mutt) without importing mail from it?
+	</para>
+	</question>
+	<answer>
+	  <para>
+	    No, but it's a planned feature.
+	  </para>
+	</answer> 
+      </qandaentry>
+
+      <qandaentry>
+	<question>
+	  <para>
+	    Can Evolution sync with my Palm OS (tm) device?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+	    Yes.  However, it is not yet stable enough for general
+	    release and we do not yet ship Evolution with Palm
+	    synchronization enabled default. Until we do, you will
+	    need to compile this in yourself. Check the
+	    <filename>README</filename> file for additional
+	    information on the requirements.  Full compatibility and
+	    synchronization for calendar and addressbook applications
+	    on Palm devices will be implemented and shipped soon.
+ 	  </para>
+	</answer> 
+      </qandaentry>
+      <qandaentry>
+	<question>
+	  <para>
+	    What is the difference between a virtual folder (vfolder)
+	    and a regular folder?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+	    A virtual folder is like a saved search: it is a view of
+	    your mail. Regular folders actually contain the mail
+	    messages.  You can have one message be in multiple virtual
+	    folders, but only in one regular folder.  See the section
+	    in the Evolution manual about virtual folders for more
+	    information.
+	  </para>
+	</answer> 
+      </qandaentry>
+      <qandaentry>
+	<question>
+	  <para>
+	    Can Evolution spell-check messages while I compose them?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+	    Yes. The Evolution composer is able to highlight
+	    mis-spelled word on the fly as you type them, and also
+	    give you suggestions for possible corrections.  In order
+	    for this to work you need the
+	    <filename>gnome-spell</filename> component, which is not
+	    shipped with Ximian GNOME yet.
+ 	 </para>
+
+	  <para>
+	    If you are brave enough, you can check out module
+	    <filename>gnome-spell</filename> from the GNOME CVS and
+	    compile it yourself.  Check out its README file for a list
+	    of <filename>gnome-spell</filename>'s requirements for
+	    compilation.
+	  </para>
+
+	  <para>
+	    Note that you don't need to recompile Evolution after
+	    installing <filename>gnome-spell</filename>; it will be
+	    picked up automatically.
+	  </para>
+	</answer>
+      </qandaentry>
+
+      <qandaentry>
+	<question>
+	  <para>
+	    Why can't I see the images that are contained in some HTML
+	    mail messages.
+	  </para>
+	</question>
+	<answer>
+	  <para>
+  	    Evolution currently doesn't support this, but it's a
+	    planned feature.  It will be an option: many people like
+	    to turn off the images because they use up bandwidth and can
+            be used to spy on your email reading habits.
+	  </para>
+	</answer> 
+      </qandaentry>
+
+      <qandaentry>
+	<question>
+	  <para>
+	    Can I change the font that Evolution uses to compose and
+	    display mail messages?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+	    You have to change the GtkHTML settings for that: in the
+	    GNOME Control Center, go to the "HTML Viewer"
+	    configuration page, which is under the "Document Handlers"
+	    category.
+	</para>
+	</answer> 
+      </qandaentry>
+      <qandaentry>
+	<question>
+	  <para>
+            How do I import my Outlook <filename>.pst</filename> files into Evolution?
+         </para>
+	</question>
+	<answer>
+	  <para>
+            You cannot import these files directly into Evolution
+            because the <filename>.pst</filename> format is a
+            proprietary format. However, Mozilla Mail on Windows can
+            convert them into the <type>mbox</type> format, which can
+            then be imported by Evolution.
+          </para>
+      
+	  <para>
+            To start importing your Outlook mail to Evolution, run
+            Mozilla Mail on Windows and select the
+            <menuchoice><guimenu>File</guimenu><guimenuitem>Import...</guimenuitem></menuchoice>
+            to begin. Then select that you wish to import Mail from
+            Outlook. Once Mozilla has imported all your mail, reboot
+            your computer into Linux.
+          </para>
+      
+          <para>
+            Mount your Windows partition in Linux and run Evolution to
+            begin importing your mail. Select
+            <menuchoice><guimenu>File</guimenu><guimenuitem>Import
+            File...</guimenuitem></menuchoice> to start importing. Set
+            the file type to MBox (mbox) and click on
+            <guibutton>Browse</guibutton> to select the mail you want
+            to import.
+          </para>
+      
+          <para>
+            If you are the only user on Windows, the mail files will
+            be stored in <filename>/mnt/c/windows/Application
+            Data/Mozilla/Profiles/default/XXXX/Mail/imported.mail/</filename>
+            where <filename>/mnt/c/</filename> is your windows
+            partition mount point and XXXX is some collection of
+            numbers and digits ending in <filename>.slt</filename>.
+          </para>
+	  
+	  <para>
+            If there is more than one user, the file will be in
+            <filename>/mnt/c/windows/Profiles/USERNAME/XXXX/Mail/imported.mail/</filename>
+            where USERNAME is your Windows username.
+         </para>
+
+	  <para>
+            For each mail folder in Outlook, Mozilla will convert the
+            folder into one mbox file. To import all your mail, import
+            all the files without a <filename>.msf</filename>
+            extension.
+           </para>
+	</answer> 
+      </qandaentry>
+
+      <qandaentry>
+        <question>
+          <para>
+            If Mozilla can import <filename>.pst</filename> files, why can't Evolution?
+          </para> 
+        </question>
+        <answer>
+          <para>
+            Mozilla on Windows accesses the <filename>.pst</filename>
+            files through the <filename>MAPI.DLL</filename>, which is
+            only avaliable on Windows.  <filename>MAPI.DLL</filename>
+            is the only way to access <filename>.pst</filename> files
+            and Evolution cannot use this DLL in Linux.
+          </para>
+        </answer> 
+      </qandaentry>
+      <qandaentry>
+        <question>
+          <para>
+             Will there be a server? How about a text-based or web-based front end?
+           </para>
+        </question>
+        <answer>
+          <para>
+            Of course, we can't comment on unannounced future product
+            plans, but Evolution's architecture would permit the
+            existence of that kind of software. If there is enough
+            demand for such software we will consider moving in that
+            direction.
+          </para>
+        </answer>
+      </qandaentry>
+
+      <qandaentry>
+        <question>
+          <para>
+           Will Evolution make a good mocha?
+           </para>
+        </question>
+        <answer>
+          <para>
+             Only espresso is planned, but you can easily plug in a chocolate component.
+          </para>
+        </answer>
+      </qandaentry>
+
+    </qandaset>
+  </sect1>
+
+
   <!-- Section: Getting and compiling -->
 
   <sect1 id="get-and-compile">
     <title>
       Getting and Compiling Evolution
     </title>
-    <qandaset>
+     <qandaset>
       <qandaentry>
         <question>
           <para>
@@ -125,6 +453,24 @@
           </programlisting>
         </answer>
       </qandaentry>
+
+      <qandaentry>
+	<question>
+	  <para>
+            If Mozilla can import <filename>.pst</filename> files, why can't Evolution?
+          </para> 
+	</question>
+	<answer>
+	  <para>
+             Mozilla on Windows accesses the <filename>.pst</filename>
+             files through the <filename>MAPI.DLL</filename>, which is
+             only available on Windows.  <filename>MAPI.DLL</filename>
+             is the only way to access <filename>.pst</filename> files
+             and Evolution cannot use this DLL in Linux.
+          </para>
+	</answer> 
+      </qandaentry>
+
       <qandaentry>
         <question>
           <para>
@@ -169,7 +515,8 @@
       <qandaentry>
         <question>
           <para>
-            I get <computeroutput>make: *** No rule to make target
+            I get the error message: <computeroutput>make: *** No rule
+              to make target
               `all-no-@BUILD_INCLUDED_LIBINTL@'</computeroutput>
           </para>
         </question>
@@ -185,59 +532,77 @@
     </qandaset>
   </sect1>
 
-  <sect1 id="faq-trouble">
-    <title>Troubleshooting</title>
+    <sect1 id="faq-trouble">
+      <title>Troubleshooting</title>
     <qandaset>
       <qandaentry>
-        <question>
-          <para>
-            I get <computeroutput>Cannot initialize the Evolution
-              shell</computeroutput>.
-          </para>
-        </question>
-        <answer>
-          <para>
-            Check that:
-          </para>
-
-          <itemizedlist>
-            <listitem>
-              <para>
-                <filename>oafd</filename> is listen in your <envar>PATH</envar>
-                environment variable.
-              </para>
-            </listitem>
-
-            <listitem>
-              <para>
-                <filename>GNOME_Evolution_Shell.oaf</filename> and
-                the other      
-                <filename>GNOME_Evolution_*.oaf</filename> files are
-                readable and installed in
-                <filename>$prefix/share/oaf</filename>, where
-                <filename>$prefix</filename> is one of the prefixes
-                listed in <envar>GNOME_PATH</envar> or
-                <envar>OAF_INFO_PATH</envar>.  (These variables are
-                supposed to contain $PATH-like colon-separated lists of
-                paths.  If the installation prefix for Evolution is
-                different from that). Run `oaf-slay' once before running
-                `evolution' again if you change $GNOME_PATH or
-                $OAF_INFO_PATH.
-              </para>
-            </listitem>
-
-            <listitem>
-              <para>
-                <filename>evolution</filename>,
-                <filename>evolution-mail</filename> and the other
-                <filename>evolution-*</filename> executables are in your
-                $PATH.
-              </para>
-            </listitem>
-          </itemizedlist>
-        </answer>
+	<question>
+	  <para>
+	    I get <computeroutput>Cannot initialize the Evolution
+	    shell</computeroutput>.
+	   </para>
+	</question>
+	<answer>
+	  <para>
+	    There are a number of things that can cause this error.
+	    Check that:
+	  </para>
+
+	    <itemizedlist>
+	      <listitem>
+		<para>
+		  <filename>oafd</filename> is listen in your <envar>PATH</envar>
+		  environment variable.
+		</para>
+	      </listitem>
+
+	      <listitem>
+		<para>
+		  <filename>GNOME_Evolution_Shell.oaf</filename> and
+		  the other      
+		  <filename>GNOME_Evolution_*.oaf</filename> files are
+		  readable and installed in
+		  <filename>$prefix/share/oaf</filename>, where
+		  <filename>$prefix</filename> is one of the prefixes
+		  listed in <envar>GNOME_PATH</envar> or
+		  <envar>OAF_INFO_PATH</envar>.  (These variables are
+		  supposed to contain $PATH-like colon-separated lists of
+		  paths.  If the installation prefix for Evolution is
+		  different from that). Run `oaf-slay' once before running
+		  `evolution' again if you change $GNOME_PATH or
+		  $OAF_INFO_PATH.
+		</para>
+	      </listitem>
+
+	      <listitem>
+		<para>
+		  <filename>evolution</filename>,
+		  <filename>evolution-mail</filename> and the other
+		  <filename>evolution-*</filename> executables are in your
+		  $PATH.
+		</para>
+	      </listitem>
+	    </itemizedlist>
+	</answer>
       </qandaentry>
-      
+ 
+      <qandaentry>
+	<question>
+	  <para>
+	    I get <computeroutput>Cannot open composer window</computeroutput>.
+	  </para>
+	</question>
+	<answer>
+	  <para>
+	  This actually means that Evolution cannot activate the HTML
+	  editor component from GtkHTML.  The comments in the previous
+	  answer still apply; also make sure that
+	  <command>gnome-gtkhtml-editor</command> is in your
+	  <envar>PATH</envar>.
+	</para>
+	</answer>
+      </qandaentry>
+ 
       <qandaentry>
         <question>
           <para>
@@ -258,8 +623,8 @@
       <qandaentry>
         <question>
           <para>
-            I updated my Evolution, but my addressbook contacts are no
-            longer there, what should I do?
+            I updated Evolution and now my addressbook information is gone!
+            What should I do?
           </para>
         </question>
         <answer>
@@ -369,7 +734,7 @@
           </programlisting>
 
           <para>
-            Yes, we know this is a problem.  It will be fixed eventually.
+            We're working on a solution to this problem now.
           </para>
         </answer>
       </qandaentry>
@@ -391,7 +756,7 @@
           </para>
 
           <para>
-            So, if this occurs to you, make sure all the components
+            If you run into this problem, make sure all the components
             are compiled and installed at the same time.  This also
             applies to GtkHTML upgrades; after upgrading and
             installing a newer GtkHTML, always re-compile and
@@ -441,13 +806,6 @@
           </para>
 
           <para>
-            Normally, you shouldn't need to run
-            <command>oaf-slay</command>, unless <command>oafd</command>
-            gets stuck or confused.  For example, it might help in case
-            Evolution cannot activate components.
-          </para>
-
-          <para>
             Using <command>oaf-slay</command>
             <command>oaf-slay</command> is quite drastic and can cause
             problems with other programs that use oaf, especially with
@@ -500,394 +858,108 @@
           </para>
         </answer>
       </qandaentry>
-
       <qandaentry>
         <question>
           <para>
-            What is a stack trace (backtrace) and how do I get one?
-          </para>
+             What is a stack trace (backtrace) and how do I get one?
+           </para>
         </question>
         <answer>
           <para>
-            A stack trace is a list of the chain of function calls that
-            lead to some point in the program.  Typically, you want to
-            get a stack trace when Evolution crashes or hangs and you
-            want to try to figure out where in the code that happened
-            and why.  For this reason, stack traces are extremely
-            useful for the Evolution developers, so it's important that
-            you learn how to get them, and include them in crash
-            reports. Once we have <command>bug-buddy</command> working
-            with our bug database, it will be much easier to do
-            this. Until then, here's how:
+              A stack trace is a list of the chain of function calls
+              that lead to some point in the program. Typically, you
+              want to get a stack trace when Evolution crashes or
+              hangs and you want to try to figure out where in the
+              code that happened and why. For this reason, stack
+              traces are extremely useful for the Evolution
+              developers, so it's important that you learn how to get
+              them, and include them in crash reports. Once we have
+              <application>bug-buddy</application> working with our
+              bug database, it will be much easier to do this. Until
+              then, here's how:
           </para>
-
           <para>
-            First of all, in order to get a stack trace, your executable
-            (and possibly the libraries) must be compiled with debugging
-            symbols.  Debugging symbols are created by default if you
-            compile from CVS, and are included in the snapshot builds.
-            If you decide to compile by yourself with some custom CFLAGS
-            value, make sure <command>-g</command> is included in them.
+             First of all, in order to get a stack trace, your
+             executable (and possibly the libraries) must be compiled
+             with debugging symbols. Debugging symbols are created by
+             default if you compile from CVS, and are included in the
+             snapshot builds. If you decide to compile by yourself
+             with some custom CFLAGS value, make sure -g is included
+             in them.
           </para>
-
           <para>
             Finally, you must put the component that crashes through
-            <command>gdb</command>.  Make sure all the components are
-            dead (exit Evolution and <command>killev</command>), then
-            run the following command:
-          </para>
-
-          <programlisting>
-            gdb name-of-component
-          </programlisting>
-
-          <para>
-            Then, at the gdb prompt, type <userinput>r</userinput> (for
-            "run") and wait a few seconds to make sure the component has
-            registered with the name service.  Then start Evolution
-            normally from a different terminal.
-          </para>
-
-          <para>
-            Then, reproduce the crash, and go back to the terminal where
-            you ran <command>gdb</command>.  If the component crashed,
-            you should have a prompt there; otherwise, just hit
-            <keycombo action=simul>
-              <keycap>Control</keycap>
-              <keycap>C</keycap>
-            </keycombo>.
-            At the prompt, type:
-          </para>
-
-          <programlisting>
-            info threads
-          </programlisting>
-
-          <para>
-            This will give you a list of the current running threads,
-            e.g.
-          </para>
-
-          <screen>
-            (gdb) info threads
-            8 Thread 6151 (LWP 14908)  0x409778fe in sigsuspend () from /lib/libc.so.6
-            7 Thread 5126 (LWP 14907)  0x409778fe in sigsuspend () from /lib/libc.so.6
-            6 Thread 4101 (LWP 1007)  0x409778fe in sigsuspend () from /lib/libc.so.6
-            5 Thread 3076 (LWP 1006)  0x409778fe in sigsuspend () from /lib/libc.so.6
-            4 Thread 2051 (LWP 1005)  0x409778fe in sigsuspend () from /lib/libc.so.6
-            3 Thread 1026 (LWP 1004)  0x409778fe in sigsuspend () from /lib/libc.so.6
-            2 Thread 2049 (LWP 1003)  0x40a10d90 in poll () from /lib/libc.so.6
-            1 Thread 1024 (LWP 995)  0x40a10d90 in poll () from /lib/libc.so.6
-          </screen>
-
-          <para>
-            (Notice that, normally, only
-            <command>evolution-mail</command> will have more than one
-            thread.)
-          </para>
-
-          <para>
-            Now, for each of the thread listed, type the following
-            commands:
-          </para>
-
-          <programlisting>
-            thread N
-            bt
-          </programlisting>
-
-          <para>
-            Where `N' is the thread number.  (In this example, you would
-            have to do it with N as 1, 2, 3... 8.)  Then cut and paste
-            all the output into some text file, and quit
-            <command>gdb</command> by typing
-            <userinput>quit</userinput>.
-          </para>
-
-          <para>
-            You can also get a stack trace from a running component or a
-            component that has just crashed.  Just start
-            <command>gdb</command> normally and, instead of using the
-            <userinput>r</userinput> command, use
-            <userinput>attach</userinput> to attach to the running
-            process:
-          </para>
-
-          <programlisting>
-            attach PID
-          </programlisting>
-
-          <para>
-            Where <userinput>PID</userinput> is the PID of the
-            component.  Notice that this also works if you attach
-            right after a crash dialog appears, before hitting "OK" or
-            "Submit bug report".
-          </para>
-        </answer> 
-      </qandaentry>
-    </qandaset>
-  </sect1> 
-  
-  <sect1 id="faq-features">
-    <title>Features</title>
-    <para>
-      Following is a list of questions about the features in
-      <application>Evolution</application>.   
-    </para>
-
-    <qandaset>
-      <qandaentry>
-        <question>
-          <para>
-            How can I remove a folder?
-          </para>
-        </question>
-        <answer>
-          <para>
-            Currently there is no command in Evolution to remove a
-            folder, so you have to remove it by hand.
-          </para>
-
-          <para>
-            All the folders are stored in
-            <filename>~/evolution/local</filename>.  Each folder is a
-            directory containing the data files, as well as a
-            <filename>subfolders</filename> directory that contains
-            all its subfolders.  So for example if you have a
-            subfolder of the <filename>Inbox</filename> called
-            <filename>Foo</filename>, you can run the following
-            command to get rid of it (and all it subfolders):
-          </para>
-
-          <programlisting>
-            rm -rf ~/evolution/local/Inbox/subfolders/Foo
-          </programlisting>
-
-          <para>
-            You should do this after exiting Evolution.
-          </para>
-        </answer> 
-      </qandaentry>
-      
-      <qandaentry>
-        <question>
-          <para>
-            Why doesn't drag and drop between folders seem to work?
-          </para>
-        </question>
-        <answer>
-          <para>
-            The implementation isn't finished, although it's planned
-            to be finished soon.
-          </para>
-
-          <para>
-            In the meantime, you can copy the folders' contents by
-            hand from the shell (please do this after quitting
-            Evolution).  For example:
-          </para>
-
-          <programlisting>
-            cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/Bar
-          </programlisting>
-
-          <para>
-            Likewise, you can use <command>mv</command> to rename or
-            move folders.
-          </para>
-        </answer>
-      </qandaentry>
-
-      <qandaentry>
-        <question>
-          <para>
-            Can I read mail from a mailbox file created by some other
-            application (e.g. Mutt) without importing mail from it?
-          </para>
-        </question>
-        <answer>
-          <para>
-            No, but it's a planned feature.
-          </para>
-        </answer> 
-      </qandaentry>
-
-      <qandaentry>
-        <question>
-          <para>
-            Can Evolution sync to my Palm OS (tm) device?
-          </para>
-        </question>
-        <answer>
-          <para>
-            Yes.  Evolution needs to be compiled with Palm syncing
-            support for this to work though.  Please refer to the
-            <filename>README</filename> file for additional
-            information on the requirements.
-          </para>
-        </answer> 
-      </qandaentry>
-      <qandaentry>
-        <question>
-          <para>
-            What is the difference between a virtual folder (vfolder)
-            and a regular folder?
-          </para>
-        </question>
-        <answer>
-          <para>
-            A virtual folder is like a saved search: it is a view of
-            your mail. Regular folders actually contain the mail
-            messages.  You can have one message be in multiple virtual
-            folders, but only in one regular folder.  See the section
-            in the Evolution manual about virtual folders for more
-            information.
-          </para>
-        </answer> 
-      </qandaentry>
-      <qandaentry>
-        <question>
-          <para>
-            Can Evolution spell-check the messages while I compose them?
-          </para>
-        </question>
-        <answer>
-          <para>
-            Yes.  The Evolution composer is able to highlight
-            mis-spelled word on the fly as you type them, and also
-            give you suggestions for possible corrections.  In order
-            for this to work you need the
-            <filename>gnome-spell</filename> component, which is not
-            shipped with Ximian GNOME yet.
-          </para>
-
-          <para>
-            If you are brave enough, you can check out module
-            <filename>gnome-spell</filename> from the GNOME CVS and
-            compile it yourself.  Check out its README file for a list
-            of <filename>gnome-spell</filename>'s requirements for
-            compilation.
-          </para>
-
-          <para>
-            Note that you don't need to recompile Evolution after
-            installing <filename>gnome-spell</filename>; it will be
-            picked up automatically.
+            <application>gdb</application>, the GNU debugging tool.
+            To do so, make sure all the components are dead (exit
+            Evolution and run <command>killev</command>), then run the
+            following command:
+               <programlisting>
+                   <command>gdb name-of-component</command>
+                </programlisting>
+           
+           Where "name-of-component" is the name of the component that
+           crashed.
+           </para>
+           <para>
+             Then, at the gdb prompt, type r (for "run") and wait a
+             few seconds to make sure the component has registered
+             with the name service. Then start
+             <application>Evolution</application> normally from a
+             different terminal.
+           </para>
+           <para>
+             When you have started
+             <application>Evolution</application>, reproduce the
+             crash, and go back to the terminal where you ran gdb. If
+             the component crashed, you should have a prompt there;
+             otherwise, just hit Control+C. At the prompt, type
+             <command>info threads</command>.  This will give you a
+             screen that looks like this:
+           </para>
+           <para>
+              <programlisting>
+(gdb) info threads
+  8 Thread 6151 (LWP 14908)  0x409778fe in sigsuspend () from /lib/libc.so.6
+  7 Thread 5126 (LWP 14907)  0x409778fe in sigsuspend () from /lib/libc.so.6
+  6 Thread 4101 (LWP 1007)  0x409778fe in sigsuspend () from /lib/libc.so.6
+  5 Thread 3076 (LWP 1006)  0x409778fe in sigsuspend () from /lib/libc.so.6
+  4 Thread 2051 (LWP 1005)  0x409778fe in sigsuspend () from /lib/libc.so.6
+  3 Thread 1026 (LWP 1004)  0x409778fe in sigsuspend () from /lib/libc.so.6
+  2 Thread 2049 (LWP 1003)  0x40a10d90 in poll () from /lib/libc.so.6
+  1 Thread 1024 (LWP 995)  0x40a10d90 in poll () from /lib/libc.so.6
+            </programlisting>
+ 
+             For the most part, only
+             <application>evolution-mail</application> will have more
+             than one thread.
+         </para>
+         <para>
+           Now, for each of the threads listed, type the following commands:
+<programlisting>
+thread N
+bt
+</programlisting>
+           Where 'N' is the number of the thread (in this example, 1
+           through 8).
+          </para>
+          <para>
+            Cut and paste all the output gdb gives you into a text
+            file.  You can quit gdb by typing
+            <userinput>quit</userinput>
+          </para>
+          <para>
+            If you prefer, you can start gdb while a process is
+            running. You'll want to do this right after a crash dialog
+            appears, but before hitting "OK" or "Submit bug report".
+            Start <application>gdb</application> as above, but instead
+            of using <userinput>r</userinput>, type <userinput>attach
+            PID</userinput> where PID is the process ID of the
+            component you want to debug.
           </para>
         </answer>
       </qandaentry>
-
-      <qandaentry>
-        <question>
-          <para>
-            I cannot see the images that are contained in some HTML
-            mail message I am getting.  Why?
-          </para>
-        </question>
-        <answer>
-          <para>
-            Evolution currently doesn't support this, but it's a
-            planned feature.  It will be an option: many people like
-            to turn off the images because they use up bandwidth and can
-            be used to spy on your email reading habits.
-          </para>
-        </answer> 
-      </qandaentry>
-
-      <qandaentry>
-        <question>
-          <para>
-            Can I change the font that Evolution uses for compose and
-            displaying mail messages?
-          </para>
-        </question>
-        <answer>
-          <para>
-            You have to change the GtkHTML settings for that: in the
-            GNOME Control Center, go to the "HTML Viewer"
-            configuration page, which is under the "Document Handlers"
-            category.
-          </para>
-        </answer> 
-      </qandaentry>
-      <qandaentry>
-        <question>
-          <para>
-            How do I import my Outlook <filename>.pst</filename> files into Evolution?
-          </para>
-        </question>
-        <answer>
-          <para>
-            You cannot import these files directly into Evolution
-            because the <filename>.pst</filename> format is a
-            proprietry format. However, Mozilla Mail on Windows can
-            convert them into the <type>mbox</type> format, which can
-            then be imported by Evolution.
-          </para>
-          
-          <para>
-            To start importing your Outlook mail to Evolution, run
-            Mozilla Mail on Windows and select the
-            <menuchoice><guimenu>File</guimenu><guimenuitem>Import...</guimenuitem></menuchoice>
-            to begin. Then select that you wish to import Mail from
-            Outlook. Once Mozilla has imported all your mail, reboot
-            your computer into Linux.
-          </para>
-          
-          <para>
-            Mount your Windows partition in Linux and run Evolution to
-            begin importing your mail. Select
-            <menuchoice><guimenu>File</guimenu><guimenuitem>Import
-                File...</guimenuitem></menuchoice> to start importing. Set
-            the file type to MBox (mbox) and click on
-            <guibutton>Browse</guibutton> to select the mail you want
-            to import.
-          </para>
-          
-          <para>
-            If you are the only user on Windows, the mail files will
-            be stored in <filename>/mnt/c/windows/Application
-              Data/Mozilla/Profiles/default/XXXX/Mail/imported.mail/</filename>
-            where <filename>/mnt/c/</filename> is your windows
-            partition mount point and XXXX is some collection of
-            numbers and digits ending in <filename>.slt</filename>.
-          </para>
-          
-          <para>
-            If there is more than one user, the file will be in
-            <filename>/mnt/c/windows/Profiles/USERNAME/XXXX/Mail/imported.mail/</filename>
-            where USERNAME is your Windows username.
-          </para>
-
-          <para>
-            For each mail folder in Outlook, Mozilla will convert the
-            folder into one mbox file. To import all your mail, import
-            all the files without a <filename>.msf</filename>
-            extension.
-          </para>
-        </answer> 
-      </qandaentry>
-      
-      <qandaentry>
-        <question>
-          <para>
-            If Mozilla can import <filename>.pst</filename> files, why can't Evolution?
-          </para> 
-        </question>
-        <answer>
-          <para>
-            Mozilla on Windows accesses the <filename>.pst</filename>
-            files through the <filename>MAPI.DLL</filename>, which is
-            only avaliable on Windows.  <filename>MAPI.DLL</filename>
-            is the only way to access <filename>.pst</filename> files
-            and Evolution cannot use this DLL in Linux.
-          </para>
-        </answer> 
-      </qandaentry>
     </qandaset>
-  </sect1> 
-</appendix>
+  </sect1>
+  </appendix>
 
-<!-- Local Variables: -->
-<!-- indent-tabs-mode:nil -->
-<!-- End: -->
\ No newline at end of file
+<!-- Local Variables: --> <!-- indent-tabs-mode:nil --> <!-- End: -->