- Readd mozilla with some testing features in bsd.gecko.mk

  bsd.gecko.mk has a very incomplete OPTIONS like feature
  that uses dialog(1) --radiolist selection for GECKO and
  defaults to GECKO.

Note: I was bored when I did this.. I'm not 100% sure this is a good idea to
	totally implement


git-svn-id: svn://creme-brulee.marcuscom.com/ports/trunk@5331 df743ca5-7f9a-e211-a948-0013205c9059

1 files changed, 186 insertions, 0 deletions

diff --git a/www/mozilla/bsd.gecko.mk b/www/mozilla/bsd.gecko.mk
new file mode 100644
index 000000000..9a4263628
--- /dev/null
+++ b/www/mozilla/bsd.gecko.mk
@@ -0,0 +1,186 @@
+#-*- mode: Fundamental; tab-width: 4; -*-
+# ex:ts=4
+#
+# $FreeBSD$
+#    $MCom: ports/www/mozilla/bsd.gecko.mk,v 1.9 2005/11/29 20:30:06 adamw Exp $
+#
+# 4 column tabs prevent hair loss and tooth decay!
+
+# bsd.gecko.mk abstracts the selection of gecko-based backends. It allows users
+# and porters to support any available gecko backend without needing to build
+# many conditional tests. ${USE_GECKO} is the list of backends that your port
+# can handle, and ${GECKO} is set by bsd.gecko.mk to be the chosen backend.
+# Users set ${WITH_GECKO} to the list of gecko backends they want on their system.
+
+.if defined(USE_GECKO)
+#.if defined(_POSTMKINCLUDED) && !defined(Gecko_Pre_Include)
+
+# Please make sure all changes to this file are passed through the maintainer.
+# Do not commit them yourself (unless of course you're the Port's Wraith ;).
+Gecko_Include_MAINTAINER=		gnome@FreeBSD.org
+Gecko_Pre_Include=			bsd.gecko.mk
+
+
+# Users should use the following syntax:
+#
+# WITH_GECKO= mozilla firefox seamonkey
+#  Use mozilla whenever a port supports it, falling back on firefox and
+#  then seamonkey.
+# WITH_GECKO= firefox
+#  Sets your preferred backend. With this example, firefox will always
+#  be chosen, unless the port doesn't support a firefox backend. In that
+#  case, you get whatever the porter chose as the default. Better to use
+#  the first example.
+#
+#
+# Ports should use the following:
+#
+# USE_GECKO= mozilla firefox seamonkey
+#  The list of gecko backends that the port supports. Unless the user
+#  overrides it with WITH_GECKO, the first gecko listed in USE_GECKO
+#  will be the default. In the above example, www/mozilla will be used
+#  as a gecko backend unless WITH_GECKO=firefox or WITH_GECKO=seamonkey
+#  is defined by the user.
+#
+#  Example:
+#  USE_GECKO= mozilla firefox seamonkey
+#  .include <bsd.port.pre.mk>
+#  .include "${.CURDIR}/../../www/mozilla/bsd.gecko.mk"
+#  post-patch:
+#	@${REINPALCE_CMD} -e 's|mozilla-|${GECKO}-|' \
+#		${WRKSRC}/configure
+#
+#  If you want your port to check the ${GECKO} variable to see which backend
+#  has been chosen.
+#
+#  Example: 
+#  USE_GECKO= mozilla firefox seamonkey
+#  .include <bsd.port.pre.mk>
+#  .include "${.CURDIR}/../../www/mozilla/bsd.gecko.mk"
+#  post-patch:
+#  .if ${GECKO}=="seamonkey"
+#	@${REINPALCE_CMD} -e 's|mozilla-|seamonkey-|' \
+#		${WRKSRC}/configure
+#  .endif
+
+.if ${OSVERSION} >= 500000
+_GECKO_ALL=	firefox nvu seamonkey sunbird
+.endif
+_GECKO_ALL+=	mozilla thunderbird
+
+sunbird_PORTSDIR=	deskutils
+
+thunderbird_PORTSDIR=	mail
+
+.for gecko in ${_GECKO_ALL}
+${gecko}_PORTSDIR?=	www
+${gecko}_DEPENDS?=	${PORTSDIR}/${${gecko}_PORTSDIR}/${gecko}
+${gecko}_PLIST?=	${X11BASE}/lib/${gecko}/libgtkembedmoz.so
+.endfor
+
+# Defines
+GECKO_OPTIONSFILE?=	${PORT_DBDIR}/${UNIQUENAME}/gecko.options
+_GECKO_OPTIONSFILE!=	${ECHO_CMD} "${GECKO_OPTIONSFILE}"
+
+# Figure out which mozilla to use
+# Weed out bad options in USE_GECKO
+.for badgecko in ${USE_GECKO}
+. if ${_GECKO_ALL:M${badgecko}}!=""
+GOOD_USE_GECKO+=	${badgecko}
+. endif
+.endfor
+
+.undef GECKO_FALLTHROUGH
+.undef _FOUND_WITH_GECKO
+# Figure out which gecko to use and weed out the bad ones
+.if defined(WITH_GECKO) && defined(GOOD_USE_GECKO)
+. for badgecko in ${WITH_GECKO}
+.  if ${GOOD_USE_GECKO:M${badgecko}}!=""
+GOOD_WITH_GECKO+=	${badgecko}
+.  endif
+. endfor
+. if defined(GOOD_WITH_GECKO)
+.  for gecko in ${GOOD_WITH_GECKO}
+.   if !defined(GECKO_FALLTHROUGH)
+GECKO=	${gecko}
+GECKO_FALLTHROUGH=	${TRUE}
+_FOUND_WITH_GECKO=	${TRUE}
+.   endif
+.  endfor
+. endif
+.endif
+
+.if !defined(GECKO) && defined(GOOD_USE_GECKO)
+. for gecko in ${GOOD_USE_GECKO}
+.  if !defined(GECKO_FALLTRHOUGH)
+GECKO=	${gecko}
+GECKO_FALLTRHOUGH=	${TRUE}
+.  endif
+. endfor
+.endif
+
+# Generic defines
+BROWSER_LINUX_PLUGINS_DIR?=	${X11BASE}/lib/browser_linux_plugins
+BROWSER_PLUGINS_DIR?=		${X11BASE}/lib/browser_plugins
+
+GECKO_CONFIG?=			${X11BASE}/bin/${GECKO}-config
+XPIDL?=				${X11BASE}/lib/${GECKO}/xpidl
+XPIDL_INCL?=			`${GECKO_CONFIG} --idlflags`
+
+.if defined(GECKO) && ${_GECKO_ALL:M${GECKO}}!=""
+BUILD_DEPENDS+=	${${GECKO}_PLIST}:${${GECKO}_DEPENDS}
+RUN_DEPENDS+=	${${GECKO}_PLIST}:${${GECKO}_DEPENDS}
+.else
+BROKEN="Unable to find a supported gecko, please check USE_GECKO"
+.endif
+
+pre-everything:: _gecko-pre-everything _gecko-config
+
+_gecko-pre-everything::
+.if defined(BATCH)
+	@${ECHO_CMD} ""
+.if !defined(_FOUND_WITH_GECKO) && defined(WITH_GECKO)
+	@${ECHO_CMD} " Warning: ${PORTNAME} does not support any gecko you"
+	@${ECHO_CMD} " listed in WITH_GECKO=${WITH_GECKO}."
+	@${ECHO_CMD} " \"${GECKO}\" will be used"
+	@${ECHO_CMD} " for gecko support, but you can change that by using one of"
+	@${ECHO_CMD} " the following values:"
+.else
+	@${ECHO_CMD} " ${PORTNAME} is using ${GECKO} for gecko support, but you can"
+	@${ECHO_CMD} " change that by defining WITH_GECKO to the following values:"
+.endif
+	@${ECHO_CMD} ""
+.for gecko in ${GOOD_USE_GECKO}
+	@${ECHO_CMD} "   ${gecko} "
+.endfor
+	@${ECHO_CMD} ""
+.endif
+
+_gecko-config:
+.if defined(GECKO_CONFIG) ## !!!Remove me after testing!!!
+.if !defined(BATCH) && !defined(_FOUND_WITH_GECKO)
+. if !defined(USE_GECKO)
+	@${ECHO_MSG} "===> No options to configure"
+. else
+.  if ${GECKO_OPTIONSFILE} != ${_GECKO_OPTIONSFILE}
+	@${ECHO_MSG} "===> Using wrong configuration file ${_GECKO_OPTIONSFILE}"
+	@exit 1
+.  endif
+.  if !defined(INSTALL_AS_USER)
+	@${ECHO_MSG} "===>  Switching to root credentials to create `${DIRNAME} ${_GECKO_OPTIONSFILE}`"
+	@(${SU_CMD} "${SH} -c \"${MKDIR} `${DIRNAME} ${_GECKO_OPTIONSFILE}` 2> /dev/null\"") || \
+		(${ECHO_MSG} "===> Cannot create `${DIRNAME} ${_GECKO_OPTIONSFILE}`, check permissions"; exit 1)
+	@${ECHO_MSG} "===>  Returning to user credentials"
+.  else
+	@(${MKDIR} `${DIRNAME} ${_GECKO_OPTIONSFILE}` 2> /dev/null) || \
+		(${ECHO_MSG} "===> Cannot create `${DIRNAME} ${_GECKO_OPTIONSFILE}`, check permissions"; exit 1)
+.  endif
+
+	${SH} -c "${DIALOG} --radiolist \"Gecko selection for ${PKGNAME:C/-([^-]+)$/ \1/}\" 21 70 15 ${GECKO} Default on ${GOOD_USE_GECKO:S/${GECKO}//:S/$/ CHANGEME off/}" 2> /tmp/gecko.tacos
+. endif
+.endif
+.endif ## !!!Remove me after testing!!!
+
+#.endif # end it all
+.endif
+# HERE THERE BE TACOS