path: root/docs/abi-spec.rst

.. index:: abi, application binary interface

.. _ABI:

******************************************
Application Binary Interface Specification
******************************************

Basic Design
============

The Application Binary Interface is the standard way to interact with contracts in the Ethereum ecosystem, both
from outside the blockchain and for contract-to-contract interaction. Data is encoded according to its type,
as described in this specification.  The encoding is not self describing and thus requires a schema in order to decode.

We assume the interface functions of a contract are strongly typed, known at compilation time and static. No introspection mechanism will be provided. We assume that all contracts will have the interface definitions of any contracts they call available at compile-time.

This specification does not address contracts whose interface is dynamic or otherwise known only at run-time. Should these cases become important they can be adequately handled as facilities built within the Ethereum ecosystem.

.. _abi_function_selector:

Function Selector
=================

The first four bytes of the call data for a function call specifies the function to be called. It is the
first (left, high-order in big-endian) four bytes of the Keccak (SHA-3) hash of the signature of the function. The signature is defined as the canonical expression of the basic prototype, i.e.
the function name with the parenthesised list of parameter types. Parameter types are split by a single comma - no spaces are used.

Argument Encoding
=================

Starting from the fifth byte, the encoded arguments follow. This encoding is also used in other places, e.g. the return values and also event arguments are encoded in the same way, without the four bytes specifying the function.

Types
=====

The following elementary types exist:

- ``uint<M>``: unsigned integer type of ``M`` bits, ``0 < M <= 256``, ``M % 8 == 0``. e.g. ``uint32``, ``uint8``, ``uint256``.

- ``int<M>``: two's complement signed integer type of ``M`` bits, ``0 < M <= 256``, ``M % 8 == 0``.

- ``address``: equivalent to ``uint160``, except for the assumed interpretation and language typing.

- ``uint``, ``int``: synonyms for ``uint256``, ``int256`` respectively (this shorthand not to be used for computing the function selector).

- ``bool``: equivalent to ``uint8`` restricted to the values 0 and 1

- ``fixed<M>x<N>``: signed fixed-point decimal number of ``M`` bits, ``8 <= M <= 256``, ``M % 8 ==0``, and ``0 < N <= 80``, which denotes the value ``v`` as ``v / (10 ** N)``.

- ``ufixed<M>x<N>``: unsigned variant of ``fixed<M>x<N>``.

- ``fixed``, ``ufixed``: synonyms for ``fixed128x19``, ``ufixed128x19`` respectively (this shorthand not to be used for computing the function selector).

- ``bytes<M>``: binary type of ``M`` bytes, ``0 < M <= 32``.

- ``function``: equivalent to ``bytes24``: an address, followed by a function selector

The following (fixed-size) array type exists:

- ``<type>[M]``: a fixed-length array of ``M`` elements, ``M > 0``, of the given type.

The following non-fixed-size types exist:

- ``bytes``: dynamic sized byte sequence.

- ``string``: dynamic sized unicode string assumed to be UTF-8 encoded.

- ``<type>[]``: a variable-length array of elements of the given type.

Types can be combined to a tuple by enclosing a finite non-negative number
of them inside parentheses, separated by commas:

- ``(T1,T2,...,Tn)``: tuple consisting of the types ``T1``, ..., ``Tn``, ``n >= 0``

It is possible to form tuples of tuples, arrays of tuples and so on.

.. note::
    Solidity supports all the types presented above with the same names with the exception of tuples. The ABI tuple type is utilised for encoding Solidity ``structs``.

Formal Specification of the Encoding
====================================

We will now formally specify the encoding, such that it will have the following
properties, which are especially useful if some arguments are nested arrays:

Properties:

  1. The number of reads necessary to access a value is at most the depth of the value inside the argument array structure, i.e. four reads are needed to retrieve ``a_i[k][l][r]``. In a previous version of the ABI, the number of reads scaled linearly with the total number of dynamic parameters in the worst case.

  2. The data of a variable or array element is not interleaved with other data and it is relocatable, i.e. it only uses relative "addresses"

We distinguish static and dynamic types. Static types are encoded in-place and dynamic types are encoded at a separately allocated location after the current block.

**Definition:** The following types are called "dynamic":

* ``bytes``
* ``string``
* ``T[]`` for any ``T``
* ``T[k]`` for any dynamic ``T`` and any ``k > 0``
* ``(T1,...,Tk)`` if any ``Ti`` is dynamic for ``1 <= i <= k``

All other types are called "static".

**Definition:** ``len(a)`` is the number of bytes in a binary string ``a``.
The type of ``len(a)`` is assumed to be ``uint256``.

We define ``enc``, the actual encoding, as a mapping of values of the ABI types to binary strings such
that ``len(enc(X))`` depends on the value of ``X`` if and only if the type of ``X`` is dynamic.

**Definition:** For any ABI value ``X``, we recursively define ``enc(X)``, depending
on the type of ``X`` being

- ``(T1,...,Tk)`` for ``k >= 0`` and any types ``T1``, ..., ``Tk``

  ``enc(X) = head(X(1)) ... head(X(k-1)) tail(X(0)) ... tail(X(k-1))``

  where ``X(i)`` is the ``ith`` component of the value, and
  ``head`` and ``tail`` are defined for ``Ti`` being a static type as

    ``head(X(i)) = enc(X(i))`` and ``tail(X(i)) = ""`` (the empty string)

  and as

    ``head(X(i)) = enc(len(head(X(0)) ... head(X(k-1)) tail(X(0)) ... tail(X(i-1))))``
    ``tail(X(i)) = enc(X(i))``

  otherwise, i.e. if ``Ti`` is a dynamic type.

  Note that in the dynamic case, ``head(X(i))`` is well-defined since the lengths of
  the head parts only depend on the types and not the values. Its value is the offset
  of the beginning of ``tail(X(i))`` relative to the start of ``enc(X)``.

- ``T[k]`` for any ``T`` and ``k``:

  ``enc(X) = enc((X[0], ..., X[k-1]))``

  i.e. it is encoded as if it were a tuple with ``k`` elements
  of the same type.

- ``T[]`` where ``X`` has ``k`` elements (``k`` is assumed to be of type ``uint256``):

  ``enc(X) = enc(k) enc([X[1], ..., X[k]])``

  i.e. it is encoded as if it were an array of static size ``k``, prefixed with
  the number of elements.

- ``bytes``, of length ``k`` (which is assumed to be of type ``uint256``):

  ``enc(X) = enc(k) pad_right(X)``, i.e. the number of bytes is encoded as a
    ``uint256`` followed by the actual value of ``X`` as a byte sequence, followed by
    the minimum number of zero-bytes such that ``len(enc(X))`` is a multiple of 32.

- ``string``:

  ``enc(X) = enc(enc_utf8(X))``, i.e. ``X`` is utf-8 encoded and this value is interpreted as of ``bytes`` type and encoded further. Note that the length used in this subsequent encoding is the number of bytes of the utf-8 encoded string, not its number of characters.

- ``uint<M>``: ``enc(X)`` is the big-endian encoding of ``X``, padded on the higher-order (left) side with zero-bytes such that the length is a multiple of 32 bytes.
- ``address``: as in the ``uint160`` case
- ``int<M>``: ``enc(X)`` is the big-endian two's complement encoding of ``X``, padded on the higher-oder (left) side with ``0xff`` for negative ``X`` and with zero bytes for positive ``X`` such that the length is a multiple of 32 bytes.
- ``bool``: as in the ``uint8`` case, where ``1`` is used for ``true`` and ``0`` for ``false``
- ``fixed<M>x<N>``: ``enc(X)`` is ``enc(X * 10**N)`` where ``X * 10**N`` is interpreted as a ``int256``.
- ``fixed``: as in the ``fixed128x19`` case
- ``ufixed<M>x<N>``: ``enc(X)`` is ``enc(X * 10**N)`` where ``X * 10**N`` is interpreted as a ``uint256``.
- ``ufixed``: as in the ``ufixed128x19`` case
- ``bytes<M>``: ``enc(X)`` is the sequence of bytes in ``X`` padded with zero-bytes to a length of 32.

Note that for any ``X``, ``len(enc(X))`` is a multiple of 32.

Function Selector and Argument Encoding
=======================================

All in all, a call to the function ``f`` with parameters ``a_1, ..., a_n`` is encoded as

  ``function_selector(f) enc((a_1, ..., a_n))``

and the return values ``v_1, ..., v_k`` of ``f`` are encoded as

  ``enc((v_1, ..., v_k))``

i.e. the values are combined into a tuple and encoded.

Examples
========

Given the contract:

::

    pragma solidity ^0.4.0;

    contract Foo {
      function bar(bytes3[2] xy) public {}
      function baz(uint32 x, bool y) public returns (bool r) { r = x > 32 || y; }
      function sam(bytes name, bool z, uint[] data) public {}
    }


Thus for our ``Foo`` example if we wanted to call ``baz`` with the parameters ``69`` and ``true``, we would pass 68 bytes total, which can be broken down into:

- ``0xcdcd77c0``: the Method ID. This is derived as the first 4 bytes of the Keccak hash of the ASCII form of the signature ``baz(uint32,bool)``.
- ``0x0000000000000000000000000000000000000000000000000000000000000045``: the first parameter, a uint32 value ``69`` padded to 32 bytes
- ``0x0000000000000000000000000000000000000000000000000000000000000001``: the second parameter - boolean ``true``, padded to 32 bytes

In total::

    0xcdcd77c000000000000000000000000000000000000000000000000000000000000000450000000000000000000000000000000000000000000000000000000000000001

It returns a single ``bool``. If, for example, it were to return ``false``, its output would be the single byte array ``0x0000000000000000000000000000000000000000000000000000000000000000``, a single bool.

If we wanted to call ``bar`` with the argument ``["abc", "def"]``, we would pass 68 bytes total, broken down into:

- ``0xfce353f6``: the Method ID. This is derived from the signature ``bar(bytes3[2])``.
- ``0x6162630000000000000000000000000000000000000000000000000000000000``: the first part of the first parameter, a ``bytes3`` value ``"abc"`` (left-aligned).
- ``0x6465660000000000000000000000000000000000000000000000000000000000``: the second part of the first parameter, a ``bytes3`` value ``"def"`` (left-aligned).

In total::

    0xfce353f661626300000000000000000000000000000000000000000000000000000000006465660000000000000000000000000000000000000000000000000000000000

If we wanted to call ``sam`` with the arguments ``"dave"``, ``true`` and ``[1,2,3]``, we would pass 292 bytes total, broken down into:

- ``0xa5643bf2``: the Method ID. This is derived from the signature ``sam(bytes,bool,uint256[])``. Note that ``uint`` is replaced with its canonical representation ``uint256``.
- ``0x0000000000000000000000000000000000000000000000000000000000000060``: the location of the data part of the first parameter (dynamic type), measured in bytes from the start of the arguments block. In this case, ``0x60``.
- ``0x0000000000000000000000000000000000000000000000000000000000000001``: the second parameter: boolean true.
- ``0x00000000000000000000000000000000000000000000000000000000000000a0``: the location of the data part of the third parameter (dynamic type), measured in bytes. In this case, ``0xa0``.
- ``0x0000000000000000000000000000000000000000000000000000000000000004``: the data part of the first argument, it starts with the length of the byte array in elements, in this case, 4.
- ``0x6461766500000000000000000000000000000000000000000000000000000000``: the contents of the first argument: the UTF-8 (equal to ASCII in this case) encoding of ``"dave"``, padded on the right to 32 bytes.
- ``0x0000000000000000000000000000000000000000000000000000000000000003``: the data part of the third argument, it starts with the length of the array in elements, in this case, 3.
- ``0x0000000000000000000000000000000000000000000000000000000000000001``: the first entry of the third parameter.
- ``0x0000000000000000000000000000000000000000000000000000000000000002``: the second entry of the third parameter.
- ``0x0000000000000000000000000000000000000000000000000000000000000003``: the third entry of the third parameter.

In total::

    0xa5643bf20000000000000000000000000000000000000000000000000000000000000060000000000000000000000000000000000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000a0000000000000000000000000000000000000000000000000000000000000000464617665000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000003000000000000000000000000000000000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000003

Use of Dynamic Types
====================

A call to a function with the signature ``f(uint,uint32[],bytes10,bytes)`` with values ``(0x123, [0x456, 0x789], "1234567890", "Hello, world!")`` is encoded in the following way:

We take the first four bytes of ``sha3("f(uint256,uint32[],bytes10,bytes)")``, i.e. ``0x8be65246``.
Then we encode the head parts of all four arguments. For the static types ``uint256`` and ``bytes10``, these are directly the values we want to pass, whereas for the dynamic types ``uint32[]`` and ``bytes``, we use the offset in bytes to the start of their data area, measured from the start of the value encoding (i.e. not counting the first four bytes containing the hash of the function signature). These are:

 - ``0x0000000000000000000000000000000000000000000000000000000000000123`` (``0x123`` padded to 32 bytes)
 - ``0x0000000000000000000000000000000000000000000000000000000000000080`` (offset to start of data part of second parameter, 4*32 bytes, exactly the size of the head part)
 - ``0x3132333435363738393000000000000000000000000000000000000000000000`` (``"1234567890"`` padded to 32 bytes on the right)
 - ``0x00000000000000000000000000000000000000000000000000000000000000e0`` (offset to start of data part of fourth parameter = offset to start of data part of first dynamic parameter + size of data part of first dynamic parameter = 4\*32 + 3\*32 (see below))

After this, the data part of the first dynamic argument, ``[0x456, 0x789]`` follows:

 - ``0x0000000000000000000000000000000000000000000000000000000000000002`` (number of elements of the array, 2)
 - ``0x0000000000000000000000000000000000000000000000000000000000000456`` (first element)
 - ``0x0000000000000000000000000000000000000000000000000000000000000789`` (second element)

Finally, we encode the data part of the second dynamic argument, ``"Hello, world!"``:

 - ``0x000000000000000000000000000000000000000000000000000000000000000d`` (number of elements (bytes in this case): 13)
 - ``0x48656c6c6f2c20776f726c642100000000000000000000000000000000000000`` (``"Hello, world!"`` padded to 32 bytes on the right)

All together, the encoding is (newline after function selector and each 32-bytes for clarity):

::

    0x8be65246
      0000000000000000000000000000000000000000000000000000000000000123
      0000000000000000000000000000000000000000000000000000000000000080
      3132333435363738393000000000000000000000000000000000000000000000
      00000000000000000000000000000000000000000000000000000000000000e0
      0000000000000000000000000000000000000000000000000000000000000002
      0000000000000000000000000000000000000000000000000000000000000456
      0000000000000000000000000000000000000000000000000000000000000789
      000000000000000000000000000000000000000000000000000000000000000d
      48656c6c6f2c20776f726c642100000000000000000000000000000000000000

Events
======

Events are an abstraction of the Ethereum logging/event-watching protocol. Log entries provide the contract's address, a series of up to four topics and some arbitrary length binary data. Events leverage the existing function ABI in order to interpret this (together with an interface spec) as a properly typed structure.

Given an event name and series of event parameters, we split them into two sub-series: those which are indexed and those which are not. Those which are indexed, which may number up to 3, are used alongside the Keccak hash of the event signature to form the topics of the log entry. Those which are not indexed form the byte array of the event.

In effect, a log entry using this ABI is described as:

- ``address``: the address of the contract (intrinsically provided by Ethereum);
- ``topics[0]``: ``keccak(EVENT_NAME+"("+EVENT_ARGS.map(canonical_type_of).join(",")+")")`` (``canonical_type_of`` is a function that simply returns the canonical type of a given argument, e.g. for ``uint indexed foo``, it would return ``uint256``). If the event is declared as ``anonymous`` the ``topics[0]`` is not generated;
- ``topics[n]``: ``EVENT_INDEXED_ARGS[n - 1]`` (``EVENT_INDEXED_ARGS`` is the series of ``EVENT_ARGS`` that are indexed);
- ``data``: ``abi_serialise(EVENT_NON_INDEXED_ARGS)`` (``EVENT_NON_INDEXED_ARGS`` is the series of ``EVENT_ARGS`` that are not indexed, ``abi_serialise`` is the ABI serialisation function used for returning a series of typed values from a function, as described above).

For all fixed-length Solidity types, the ``EVENT_INDEXED_ARGS`` array contains the 32-byte encoded value directly. However, for *types of dynamic length*, which include ``string``, ``bytes``, and arrays, ``EVENT_INDEXED_ARGS`` will contain the *Keccak hash* of the encoded value, rather than the encoded value directly. This allows applications to efficiently query for values of dynamic-length types (by setting the hash of the encoded value as the topic), but leaves applications unable to decode indexed values they have not queried for. For dynamic-length types, application developers face a trade-off between fast search for predetermined values (if the argument is indexed) and legibility of arbitrary values (which requires that the arguments not be indexed). Developers may overcome this tradeoff and achieve both efficient search and arbitrary legibility by defining events with two arguments — one indexed, one not — intended to hold the same value.

JSON
====

The JSON format for a contract's interface is given by an array of function and/or event descriptions.
A function description is a JSON object with the fields:

- ``type``: ``"function"``, ``"constructor"``, or ``"fallback"`` (the :ref:`unnamed "default" function <fallback-function>`);
- ``name``: the name of the function;
- ``inputs``: an array of objects, each of which contains:

  * ``name``: the name of the parameter;
  * ``type``: the canonical type of the parameter (more below).
  * ``components``: used for tuple types (more below).

- ``outputs``: an array of objects similar to ``inputs``, can be omitted if function doesn't return anything;
- ``payable``: ``true`` if function accepts ether, defaults to ``false``;
- ``stateMutability``: a string with one of the following values: ``pure`` (:ref:`specified to not read blockchain state <pure-functions>`), ``view`` (:ref:`specified to not modify the blockchain state <view-functions>`), ``nonpayable`` and ``payable`` (same as ``payable`` above).
- ``constant``: ``true`` if function is either ``pure`` or ``view``

``type`` can be omitted, defaulting to ``"function"``.

Constructor and fallback function never have ``name`` or ``outputs``. Fallback function doesn't have ``inputs`` either.

Sending non-zero ether to non-payable function will throw. Don't do it.

An event description is a JSON object with fairly similar fields:

- ``type``: always ``"event"``
- ``name``: the name of the event;
- ``inputs``: an array of objects, each of which contains:

  * ``name``: the name of the parameter;
  * ``type``: the canonical type of the parameter (more below).
  * ``components``: used for tuple types (more below).
  * ``indexed``: ``true`` if the field is part of the log's topics, ``false`` if it one of the log's data segment.

- ``anonymous``: ``true`` if the event was declared as ``anonymous``.

For example,

::

    pragma solidity ^0.4.0;

    contract Test {
      function Test() public { b = 0x12345678901234567890123456789012; }
      event Event(uint indexed a, bytes32 b);
      event Event2(uint indexed a, bytes32 b);
      function foo(uint a) public { Event(a, b); }
      bytes32 b;
    }

would result in the JSON:

.. code:: json

  [{
  "type":"event",
  "inputs": [{"name":"a","type":"uint256","indexed":true},{"name":"b","type":"bytes32","indexed":false}],
  "name":"Event"
  }, {
  "type":"event",
  "inputs": [{"name":"a","type":"uint256","indexed":true},{"name":"b","type":"bytes32","indexed":false}],
  "name":"Event2"
  }, {
  "type":"function",
  "inputs": [{"name":"a","type":"uint256"}],
  "name":"foo",
  "outputs": []
  }]

Handling tuple types
--------------------

Despite that names are intentionally not part of the ABI encoding they do make a lot of sense to be included
in the JSON to enable displaying it to the end user. The structure is nested in the following way:

An object with members ``name``, ``type`` and potentially ``components`` describes a typed variable.
The canonical type is determined until a tuple type is reached and the string description up
to that point is stored in ``type`` prefix with the word ``tuple``, i.e. it will be ``tuple`` followed by
a sequence of ``[]`` and ``[k]`` with
integers ``k``. The components of the tuple are then stored in the member ``components``,
which is of array type and has the same structure as the top-level object except that
``indexed`` is not allowed there.

As an example, the code

::

    pragma solidity ^0.4.19;
    pragma experimental ABIEncoderV2;

    contract Test {
      struct S { uint a; uint[] b; T[] c; }
      struct T { uint x; uint y; }
      function f(S s, T t, uint a) public { }
      function g() public returns (S s, T t, uint a) {}
    }

would result in the JSON:

.. code:: json

  [
    {
      "name": "f",
      "type": "function",
      "inputs": [
        {
          "name": "s",
          "type": "tuple",
          "components": [
            {
              "name": "a",
              "type": "uint256"
            },
            {
              "name": "b",
              "type": "uint256[]"
            },
            {
              "name": "c",
              "type": "tuple[]",
              "components": [
                {
                  "name": "x",
                  "type": "uint256"
                },
                {
                  "name": "y",
                  "type": "uint256"
                }
              ]
            }
          ]
        },
        {
          "name": "t",
          "type": "tuple",
          "components": [
            {
              "name": "x",
              "type": "uint256"
            },
            {
              "name": "y",
              "type": "uint256"
            }
          ]
        },
        {
          "name": "a",
          "type": "uint256"
        }
      ],
      "outputs": []
    }
  ]

.. _abi_packed_mode:

Non-standard Packed Mode
========================

Solidity supports a non-standard packed mode where:

- no :ref:`function selector <abi_function_selector>` is encoded,
- types shorter than 32 bytes are neither zero padded nor sign extended and
- dynamic types are encoded in-place and without the length.

As an example encoding ``int1, bytes1, uint16, string`` with values ``-1, 0x42, 0x2424, "Hello, world!"`` results in ::

    0xff42242448656c6c6f2c20776f726c6421
      ^^                                 int1(-1)
        ^^                               bytes1(0x42)
          ^^^^                           uint16(0x2424)
              ^^^^^^^^^^^^^^^^^^^^^^^^^^ string("Hello, world!") without a length field

More specifically, each statically-sized type takes as many bytes as its range has
and dynamically-sized types like ``string``, ``bytes`` or ``uint[]`` are encoded without
their length field. This means that the encoding is ambiguous as soon as there are two
dynamically-sized elements.